2 # Makefile for directory with subdirs to build.
3 # Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
4 # 1999, 2000 Free Software Foundation
6 # This file is free software; you can redistribute it and/or modify
7 # it under the terms of the GNU General Public License as published by
8 # the Free Software Foundation; either version 2 of the License, or
9 # (at your option) any later version.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 # GNU General Public License for more details.
16 # You should have received a copy of the GNU General Public License
17 # along with this program; if not, write to the Free Software
18 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24 exec_prefix = $(prefix)
26 bindir=${exec_prefix}/bin
27 sbindir=${exec_prefix}/sbin
28 libexecdir=${exec_prefix}/libexec
29 datadir=${prefix}/share
30 sysconfdir=${prefix}/etc
31 sharedstatedir=${prefix}/com
32 localstatedir=${prefix}/var
33 libdir=${exec_prefix}/lib
34 includedir=${prefix}/include
35 oldincludedir=/usr/include
36 infodir=${prefix}/info
38 gxx_include_dir=${includedir}/g++
40 tooldir = $(exec_prefix)/$(target_alias)
41 build_tooldir = $(exec_prefix)/$(target_alias)
43 program_transform_name =
45 man1dir = $(mandir)/man1
46 man2dir = $(mandir)/man2
47 man3dir = $(mandir)/man3
48 man4dir = $(mandir)/man4
49 man5dir = $(mandir)/man5
50 man6dir = $(mandir)/man6
51 man7dir = $(mandir)/man7
52 man8dir = $(mandir)/man8
53 man9dir = $(mandir)/man9
54 infodir = $(prefix)/info
55 includedir = $(prefix)/include
56 # Directory in which the compiler finds executables, libraries, etc.
57 libsubdir = $(libdir)/gcc-lib/$(target_alias)/$(gcc_version)
62 # INSTALL_PROGRAM_ARGS is changed by configure.in to use -x for a
64 INSTALL_PROGRAM_ARGS =
66 INSTALL = $(SHELL) $$s/install-sh -c
67 INSTALL_PROGRAM = $(INSTALL) $(INSTALL_PROGRAM_ARGS)
68 INSTALL_SCRIPT = $(INSTALL)
69 INSTALL_DATA = $(INSTALL) -m 644
71 INSTALL_DOSREL = install-dosrel-fake
78 # Special variables passed down in EXTRA_GCC_FLAGS. They are defined
79 # here so that they can be overridden by Makefile fragments.
80 HOST_CC = $(CC_FOR_BUILD)
82 HOST_PREFIX_1 = loser-
84 # These flag values are normally overridden by the configure script.
90 CFLAGS_FOR_TARGET = $(CFLAGS)
92 LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
96 CHILLFLAGS = $(CFLAGS)
100 # Use -O2 to stress test the compiler.
101 LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
102 CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
103 LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
115 # These values are substituted by configure.
120 BISON = `if [ -f $$r/bison/bison ] ; then \
121 echo $$r/bison/bison -L $$s/bison/ ; \
126 YACC = `if [ -f $$r/bison/bison ] ; then \
127 echo $$r/bison/bison -y -L $$s/bison/ ; \
128 elif [ -f $$r/byacc/byacc ] ; then \
129 echo $$r/byacc/byacc ; \
131 echo ${DEFAULT_YACC} ; \
134 LEX = `if [ -f $$r/flex/flex ] ; \
135 then echo $$r/flex/flex ; \
136 else echo ${DEFAULT_LEX} ; fi`
138 M4 = `if [ -f $$r/m4/m4 ] ; \
139 then echo $$r/m4/m4 ; \
140 else echo ${DEFAULT_M4} ; fi`
142 MAKEINFO = `if [ -f $$r/texinfo/makeinfo/Makefile ] ; \
143 then echo $$r/texinfo/makeinfo/makeinfo ; \
144 else echo makeinfo ; fi`
146 # This just becomes part of the MAKEINFO definition passed down to
147 # sub-makes. It lets flags be given on the command line while still
148 # using the makeinfo from the object tree.
151 EXPECT = `if [ -f $$r/expect/expect ] ; \
152 then echo $$r/expect/expect ; \
153 else echo expect ; fi`
155 RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \
156 then echo $$s/dejagnu/runtest ; \
157 else echo runtest ; fi`
160 # compilers to use to create programs which must be run in the build
163 CXX_FOR_BUILD = $(CXX)
165 SUBDIRS = "this is set via configure, don't edit this"
168 # This is set by the configure script to the list of directories which
169 # should be built using the target tools.
170 TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib librx winsup opcodes bsp libstub cygmon libf2c libchill libobjc
172 # Target libraries are put under this directory:
173 # Changed by configure to $(target_alias) if cross.
176 # This is set by the configure script to the arguments passed to configure.
179 # This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
183 # This is the name of the environment variable used for the path to
184 # the libraries. This may be changed by configure.in.
185 RPATH_ENVVAR = LD_LIBRARY_PATH
187 # This is the list of directories that may be needed in RPATH_ENVVAR
188 # so that programs built for the host machine work.
189 HOST_LIB_PATH = $$r/bfd:$$r/opcodes
191 # This is the list of directories that may be needed in RPATH_ENVVAR
192 # so that prorgams built for the target machine work.
193 TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:
195 # configure.in sets SET_LIB_PATH to this if --enable-shared was used.
196 # Some platforms don't like blank entries, so we remove duplicate,
197 # leading and trailing colons.
198 REALLY_SET_LIB_PATH = \
199 $(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH):$(TARGET_LIB_PATH):$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR);
202 INSTALL_TARGET = installdirs \
205 $(INSTALL_TARGET_MODULES) \
206 $(INSTALL_X11_MODULES) \
209 INSTALL_TARGET_CROSS = installdirs \
212 $(INSTALL_TARGET_MODULES) \
213 $(INSTALL_X11_MODULES) \
216 # Should be substed by configure.in
221 CXX_FOR_TARGET_FOR_RECURSIVE_MAKE =
224 # If GCC_FOR_TARGET is not overriden on the command line, then this
225 # variable is passed down to the gcc Makefile, where it is used to
226 # build libgcc2.a. We define it here so that it can itself be
227 # overridden on the command line.
228 GCC_FOR_TARGET = $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET)
231 if [ -f $$r/gas/as-new ] ; then \
232 echo $$r/gas/as-new ; \
234 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
237 t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
242 if [ -f $$r/ld/ld-new ] ; then \
243 echo $$r/ld/ld-new ; \
245 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
248 t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \
252 DLLTOOL_FOR_TARGET = ` \
253 if [ -f $$r/binutils/dlltool ] ; then \
254 echo $$r/binutils/dlltool ; \
256 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
259 t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
263 WINDRES_FOR_TARGET = ` \
264 if [ -f $$r/binutils/windres ] ; then \
265 echo $$r/binutils/windres ; \
267 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
270 t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \
275 if [ -f $$r/binutils/ar ] ; then \
276 echo $$r/binutils/ar ; \
278 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
281 t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
285 RANLIB_FOR_TARGET = ` \
286 if [ -f $$r/binutils/ranlib ] ; then \
287 echo $$r/binutils/ranlib ; \
289 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
290 if [ x"$(RANLIB)" != x ]; then \
296 t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
301 if [ -f $$r/binutils/nm-new ] ; then \
302 echo $$r/binutils/nm-new ; \
304 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
307 t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
311 # The first rule in the file had better be this one. Don't put any above it.
312 # This lives here to allow makefile fragments to contain dependencies.
316 # These can be overridden by config/mt-*.
317 # The _TARGET_ is because they're specified in mt-foo.
318 # The _HOST_ is because they're programs that run on the host.
319 EXTRA_TARGET_HOST_ALL_MODULES =
320 EXTRA_TARGET_HOST_INSTALL_MODULES =
321 EXTRA_TARGET_HOST_CHECK_MODULES =
323 #### host and target specific makefile fragments come in here.
326 # Flags to pass down to all sub-makes.
327 # Please keep these in alphabetical order.
328 BASE_FLAGS_TO_PASS = \
329 "AR_FLAGS=$(AR_FLAGS)" \
330 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
331 "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
333 "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
334 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
336 "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
337 "CHILLFLAGS=$(CHILLFLAGS)" \
338 "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
339 "CHILL_LIB=$(CHILL_LIB)" \
340 "GCJ_FOR_TARGET=$(GCJ_FOR_TARGET)" \
341 "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
342 "CXXFLAGS=$(CXXFLAGS)" \
343 "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
344 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
345 "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
346 "INSTALL=$(INSTALL)" \
347 "INSTALL_DATA=$(INSTALL_DATA)" \
348 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
349 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
350 "LDFLAGS=$(LDFLAGS)" \
352 "LD_FOR_TARGET=$(LD_FOR_TARGET)" \
353 "LIBCFLAGS=$(LIBCFLAGS)" \
354 "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
355 "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
356 "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
359 "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
360 "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
361 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
362 "RPATH_ENVVAR=$(RPATH_ENVVAR)" \
365 "RUNTEST=$(RUNTEST)" \
366 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
367 "TARGET_SUBDIR=$(TARGET_SUBDIR)" \
368 "WINDRES_FOR_TARGET=$(WINDRES_FOR_TARGET)" \
371 "datadir=$(datadir)" \
372 "exec_prefix=$(exec_prefix)" \
373 "includedir=$(includedir)" \
374 "infodir=$(infodir)" \
376 "libexecdir=$(libexecdir)" \
377 "lispdir=$(lispdir)" \
378 "libstdcxx_incdir=$(libstdcxx_incdir)" \
379 "libsubdir=$(libsubdir)" \
380 "localstatedir=$(localstatedir)" \
382 "oldincludedir=$(oldincludedir)" \
384 "sbindir=$(sbindir)" \
385 "sharedstatedir=$(sharedstatedir)" \
386 "sysconfdir=$(sysconfdir)" \
387 "tooldir=$(tooldir)" \
388 "build_tooldir=$(build_tooldir)" \
389 "gxx_include_dir=$(gxx_include_dir)" \
390 "gcc_version=$(gcc_version)" \
391 "gcc_version_trigger=$(gcc_version_trigger)" \
392 "target_alias=$(target_alias)"
394 # For any flags above that may contain shell code that varies from one
395 # target library to another. When doing recursive invocations of the
396 # top-level Makefile, we don't want the outer make to evaluate them,
397 # so we pass these variables down unchanged. They must not contain
398 # single nor double quotes.
400 CXX_FOR_TARGET='$(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)'
402 # Flags to pass down to most sub-makes, in which we're building with
403 # the host environment.
404 # If any variables are added here, they must be added to do-*, below.
410 'DLLTOOL=$(DLLTOOL)' \
413 "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
416 FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
418 # Flags that are concerned with the location of the X11 include files
421 # NOTE: until the top-level is getting the values via autoconf, it only
422 # causes problems to have this top-level Makefile overriding the autoconf-set
423 # values in child directories. Only variables that don't conflict with
424 # autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now.
426 X11_FLAGS_TO_PASS = \
427 'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \
428 'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)'
430 # Flags to pass down to makes which are built with the target environment.
431 # The double $ decreases the length of the command line; the variables
432 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
433 # If any variables are added here, they must be added to do-*, below.
434 EXTRA_TARGET_FLAGS = \
435 'AR=$$(AR_FOR_TARGET)' \
436 'AS=$$(AS_FOR_TARGET)' \
437 'CC=$$(CC_FOR_TARGET)' \
438 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
439 'CXX=$$(CXX_FOR_TARGET)' \
440 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
441 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
442 'LD=$$(LD_FOR_TARGET)' \
443 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
444 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
445 'NM=$$(NM_FOR_TARGET)' \
446 "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
447 'WINDRES=$$(WINDRES_FOR_TARGET)'
449 TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
451 # Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
452 # unfortunately needs the native compiler and the target ar and
454 # If any variables are added here, they must be added to do-*, below.
455 # The HOST_* variables are a special case, which are used for the gcc
456 # cross-building scheme.
462 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
463 'HOST_CC=$(CC_FOR_BUILD)' \
464 'HOST_PREFIX=$(HOST_PREFIX)' \
465 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
467 "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
468 'WINDRES=$$(WINDRES_FOR_TARGET)' \
469 "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
470 "`echo 'LANGUAGES=$(LANGUAGES)' | sed -e s/.*=$$/XFOO=/`" \
471 "`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s/.*=$$/XFOO=/`" \
472 "`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s/.*=$$/XFOO=/`" \
473 "`echo 'LIBGCC1_TEST=$(LIBGCC1_TEST)' | sed -e s/.*=$$/XFOO=/`" \
474 "`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
475 "`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
476 "`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s/.*=$$/XFOO=/`" \
477 "`echo 'ENQUIRE=$(ENQUIRE)' | sed -e s/.*=$$/XFOO=/`" \
478 "`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s/.*=$$/XFOO=/`"
480 GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
482 # This is a list of the targets for all of the modules which are compiled
483 # using $(FLAGS_TO_PASS).
552 $(EXTRA_TARGET_HOST_ALL_MODULES)
554 # This is a list of the check targets for all of the modules which are
555 # compiled using $(FLAGS_TO_PASS).
557 # The list is in two parts. The first lists those tools which
558 # are tested as part of the host's native tool-chain, and not
559 # tested in a cross configuration.
560 NATIVE_CHECK_MODULES = \
567 CROSS_CHECK_MODULES = \
625 $(EXTRA_TARGET_HOST_CHECK_MODULES)
627 CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
629 # This is a list of the install targets for all of the modules which are
630 # compiled using $(FLAGS_TO_PASS).
631 # We put install-opcodes before install-binutils because the installed
632 # binutils might be on PATH, and they might need the shared opcodes
634 # We put install-tcl before install-itcl because itcl wants to run a
635 # program on installation which uses the Tcl libraries.
701 $(EXTRA_TARGET_HOST_INSTALL_MODULES)
703 # This is a list of the targets for all of the modules which are compiled
704 # using $(X11_FLAGS_TO_PASS).
717 # This is a list of the check targets for all of the modules which are
718 # compiled using $(X11_FLAGS_TO_PASS).
719 CHECK_X11_MODULES = \
729 # This is a list of the install targets for all the modules which are
730 # compiled using $(X11_FLAGS_TO_PASS).
731 INSTALL_X11_MODULES = \
743 # This is a list of the targets for all of the modules which are compiled
744 # using $(TARGET_FLAGS_TO_PASS).
745 ALL_TARGET_MODULES = \
746 all-target-libstdc++-v3 \
750 all-target-libchill \
752 all-target-libtermcap \
754 all-target-libgloss \
755 all-target-libiberty \
757 all-target-examples \
762 all-target-boehm-gc \
763 all-target-qthreads \
767 # This is a list of the configure targets for all of the modules which
768 # are compiled using the target tools.
769 CONFIGURE_TARGET_MODULES = \
770 configure-target-libstdc++-v3 \
771 configure-target-librx \
772 configure-target-newlib \
773 configure-target-libf2c \
774 configure-target-libchill \
775 configure-target-libobjc \
776 configure-target-libtermcap \
777 configure-target-winsup \
778 configure-target-libgloss \
779 configure-target-libiberty \
780 configure-target-gperf \
781 configure-target-examples \
782 configure-target-libstub \
783 configure-target-libffi \
784 configure-target-libjava \
785 configure-target-zlib \
786 configure-target-boehm-gc \
787 configure-target-qthreads \
788 configure-target-bsp \
789 configure-target-cygmon
791 # This is a list of the check targets for all of the modules which are
792 # compiled using $(TARGET_FLAGS_TO_PASS).
793 CHECK_TARGET_MODULES = \
794 check-target-libstdc++-v3 \
795 check-target-newlib \
796 check-target-libf2c \
797 check-target-libchill \
798 check-target-libobjc \
799 check-target-winsup \
800 check-target-libiberty \
801 check-target-libffi \
802 check-target-libjava \
804 check-target-boehm-gc \
805 check-target-qthreads \
808 # This is a list of the install targets for all of the modules which are
809 # compiled using $(TARGET_FLAGS_TO_PASS).
810 INSTALL_TARGET_MODULES = \
811 install-target-libstdc++-v3 \
812 install-target-newlib \
813 install-target-libf2c \
814 install-target-libchill \
815 install-target-libobjc \
816 install-target-libtermcap \
817 install-target-winsup \
818 install-target-libgloss \
819 install-target-libiberty \
821 install-target-libjava \
822 install-target-zlib \
823 install-target-boehm-gc \
824 install-target-qthreads \
827 # This is a list of the targets for which we can do a clean-{target}.
896 # All of the target modules that can be cleaned
897 CLEAN_TARGET_MODULES = \
898 clean-target-libstdc++-v3 \
900 clean-target-newlib \
901 clean-target-libf2c \
902 clean-target-libchill \
903 clean-target-libobjc \
904 clean-target-winsup \
905 clean-target-libgloss \
906 clean-target-libiberty \
908 clean-target-examples \
909 clean-target-libstub \
910 clean-target-libffi \
911 clean-target-libjava \
913 clean-target-boehm-gc \
914 clean-target-qthreads \
918 # All of the x11 modules that can be cleaned
919 CLEAN_X11_MODULES = \
930 # The target built for a native build.
935 $(ALL_TARGET_MODULES) \
938 # Do a target for all the subdirectories. A ``make do-X'' will do a
939 # ``make X'' in all subdirectories (because, in general, there is a
940 # dependency (below) of X upon do-X, a ``make X'' will also do this,
941 # but it may do additional work as well).
942 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
943 # because it is so large that it can easily overflow the command line
944 # length limit on some systems.
953 do-maintainer-clean \
957 @target=`echo $@ | sed -e 's/^do-//'`; \
959 s=`cd $(srcdir); pwd`; export s; \
961 for i in $(SUBDIRS) -dummy-; do \
962 if [ -f ./$$i/Makefile ]; then \
965 for flag in $(EXTRA_GCC_FLAGS); do \
966 eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
970 for flag in $(EXTRA_HOST_FLAGS); do \
971 eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
975 export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
977 $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
978 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
979 "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
980 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
982 then true; else exit 1; fi; \
985 @target=`echo $@ | sed -e 's/^do-//'`; \
987 s=`cd $(srcdir); pwd`; export s; \
989 for i in $(TARGET_CONFIGDIRS) -dummy-; do \
990 if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \
991 for flag in $(EXTRA_TARGET_FLAGS); do \
992 eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'|"`; \
994 export AR AS CC CXX LD NM RANLIB DLLTOOL WINDRES; \
995 if (cd $(TARGET_SUBDIR)/$$i; \
996 $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
997 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
998 "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
999 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
1001 then true; else exit 1; fi; \
1005 # Here are the targets which correspond to the do-X targets.
1007 .PHONY: info installcheck dvi install-info
1008 .PHONY: clean distclean mostlyclean maintainer-clean realclean
1009 .PHONY: local-clean local-distclean local-maintainer-clean
1011 installcheck: do-installcheck
1014 # Make sure makeinfo is built before we do a `make info'.
1015 do-info: all-texinfo
1017 install-info: do-install-info dir.info
1018 s=`cd $(srcdir); pwd`; export s; \
1019 if [ -f dir.info ] ; then \
1020 $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
1024 -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log
1027 -rm -f Makefile config.status config.cache mh-frag mt-frag
1028 -if [ "$(TARGET_SUBDIR)" != "." ]; then \
1029 rm -rf $(TARGET_SUBDIR); \
1031 -rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile
1032 -rm -f texinfo/doc/Makefile texinfo/po/POTFILES
1033 -rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
1034 -rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null
1035 -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null
1037 local-maintainer-clean:
1038 @echo "This command is intended for maintainers to use;"
1039 @echo "it deletes files that may require special tools to rebuild."
1041 clean: do-clean local-clean
1042 mostlyclean: do-mostlyclean local-clean
1043 distclean: do-distclean local-clean local-distclean
1044 maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean
1045 maintainer-clean: local-distclean
1046 realclean: maintainer-clean
1048 # This rule is used to clean specific modules.
1049 .PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc
1050 $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc:
1051 @dir=`echo $@ | sed -e 's/clean-//'`; \
1052 if [ -f ./$${dir}/Makefile ] ; then \
1053 r=`pwd`; export r; \
1054 s=`cd $(srcdir); pwd`; export s; \
1056 (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \
1061 .PHONY: $(CLEAN_TARGET_MODULES)
1062 $(CLEAN_TARGET_MODULES):
1063 @dir=`echo $@ | sed -e 's/clean-target-//'`; \
1064 rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
1065 if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1066 r=`pwd`; export r; \
1067 s=`cd $(srcdir); pwd`; export s; \
1069 (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \
1074 clean-target: $(CLEAN_TARGET_MODULES) clean-target-libgcc
1075 clean-target-libgcc:
1076 test ! -d gcc/libgcc || \
1077 (cd gcc/libgcc && find . -type d -print) | \
1078 while read d; do rm -f gcc/$$d/libgcc.a || : ; done
1084 check: $(CHECK_MODULES) \
1085 $(CHECK_TARGET_MODULES) \
1086 $(CHECK_X11_MODULES) \
1089 # Automated reporting of test results.
1091 warning.log: build.log
1092 $(srcdir)/contrib/warn_summary build.log > $@
1095 if test x'$(BOOT_CFLAGS)' != x''; then \
1096 BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
1098 $(srcdir)/contrib/test_summary -t >$@
1100 echo If you really want to send e-mail, run ./$@ now
1102 mail-report-with-warnings.log: warning.log
1103 if test x'$(BOOT_CFLAGS)' != x''; then \
1104 BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \
1106 $(srcdir)/contrib/test_summary -t -i warning.log >$@
1108 echo If you really want to send e-mail, run ./$@ now
1110 # Installation targets.
1112 .PHONY: install install-cross uninstall source-vault binary-vault vault-install
1113 install: $(INSTALL_TARGET)
1114 install-cross: $(INSTALL_TARGET_CROSS)
1117 @echo "the uninstall target is not supported in this tree"
1120 $(MAKE) -f ./release/Build-A-Release \
1121 host=$(host_alias) source-vault
1124 $(MAKE) -f ./release/Build-A-Release \
1125 host=$(host_alias) target=$(target_alias)
1128 @if [ -f ./release/vault-install ] ; then \
1129 ./release/vault-install $(host_alias) $(target_alias) ; \
1135 install.all: install-no-fixedincludes
1136 @if [ -f ./gcc/Makefile ] ; then \
1137 r=`pwd` ; export r ; \
1140 $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
1145 # inet-install is used because the I*Net wants DejaGNU installed but
1146 # not built. Similarly, gzip is built but not installed.
1148 $(MAKE) INSTALL_MODULES="`echo $(INSTALL_MODULES) | sed -e 's/install-dejagnu//' -e 's/install-gzip//'`" install
1150 # install-no-fixedincludes is used because Cygnus can not distribute
1151 # the fixed header files.
1152 .PHONY: install-no-fixedincludes
1153 install-no-fixedincludes: \
1155 $(INSTALL_MODULES) \
1156 $(INSTALL_TARGET_MODULES) \
1157 $(INSTALL_X11_MODULES) \
1158 gcc-no-fixedincludes
1160 # Install the gcc headers files, but not the fixed include files,
1161 # which Cygnus is not allowed to distribute. This rule is very
1162 # dependent on the workings of the gcc Makefile.in.
1163 .PHONY: gcc-no-fixedincludes
1164 gcc-no-fixedincludes:
1165 @if [ -f ./gcc/Makefile ]; then \
1166 rm -rf gcc/tmp-include; \
1167 mv gcc/include gcc/tmp-include 2>/dev/null; \
1168 mkdir gcc/include; \
1169 cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
1170 touch gcc/stmp-fixinc gcc/include/fixed; \
1171 rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
1172 r=`pwd`; export r; \
1173 s=`cd $(srcdir); pwd` ; export s; \
1176 $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
1177 rm -rf gcc/include; \
1178 mv gcc/tmp-include gcc/include 2>/dev/null; \
1181 # This rule is used to build the modules which use FLAGS_TO_PASS. To
1182 # build a target all-X means to cd to X and make all.
1184 # all-gui, and all-libproc are handled specially because
1185 # they are still experimental, and if they fail to build, that
1186 # shouldn't stop "make all".
1187 .PHONY: $(ALL_MODULES) all-gui all-libproc
1188 $(ALL_MODULES) all-gui all-libproc:
1189 @dir=`echo $@ | sed -e 's/all-//'`; \
1190 if [ -f ./$${dir}/Makefile ] ; then \
1191 r=`pwd`; export r; \
1192 s=`cd $(srcdir); pwd`; export s; \
1194 (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
1199 # These rules are used to check the modules which use FLAGS_TO_PASS.
1200 # To build a target check-X means to cd to X and make check. Some
1201 # modules are only tested in a native toolchain.
1203 .PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
1204 $(NATIVE_CHECK_MODULES):
1205 @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
1206 dir=`echo $@ | sed -e 's/check-//'`; \
1207 if [ -f ./$${dir}/Makefile ] ; then \
1208 r=`pwd`; export r; \
1209 s=`cd $(srcdir); pwd`; export s; \
1211 (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
1217 $(CROSS_CHECK_MODULES):
1218 @dir=`echo $@ | sed -e 's/check-//'`; \
1219 if [ -f ./$${dir}/Makefile ] ; then \
1220 r=`pwd`; export r; \
1221 s=`cd $(srcdir); pwd`; export s; \
1223 (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
1228 # This rule is used to install the modules which use FLAGS_TO_PASS.
1229 # To build a target install-X means to cd to X and make install.
1230 .PHONY: $(INSTALL_MODULES)
1231 $(INSTALL_MODULES): installdirs
1232 @dir=`echo $@ | sed -e 's/install-//'`; \
1233 if [ -f ./$${dir}/Makefile ] ; then \
1234 r=`pwd`; export r; \
1235 s=`cd $(srcdir); pwd`; export s; \
1237 (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
1242 # This rule is used to configure the modules which are built with the
1244 .PHONY: $(CONFIGURE_TARGET_MODULES)
1245 $(CONFIGURE_TARGET_MODULES):
1246 @dir=`echo $@ | sed -e 's/configure-target-//'`; \
1247 if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \
1248 r=`pwd`; export r; \
1249 $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \
1250 if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \
1251 if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \
1252 if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \
1253 rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
1255 echo "Multilibs changed for $${dir}, reconfiguring"; \
1256 rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \
1257 mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
1260 mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
1263 fi; exit 0 # break command into two pieces
1264 @dir=`echo $@ | sed -e 's/configure-target-//'`; \
1265 if [ ! -d $(TARGET_SUBDIR) ]; then \
1267 elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1269 elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
1270 if [ -d $(srcdir)/$${dir} ]; then \
1271 [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
1272 r=`pwd`; export r; \
1273 s=`cd $(srcdir); pwd`; export s; \
1275 AR="$(AR_FOR_TARGET)"; export AR; \
1276 AS="$(AS_FOR_TARGET)"; export AS; \
1277 CC="$(CC_FOR_TARGET)"; export CC; \
1278 CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
1279 CXX="$(CXX_FOR_TARGET)"; export CXX; \
1280 CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
1281 GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
1282 DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
1283 LD="$(LD_FOR_TARGET)"; export LD; \
1284 LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
1285 NM="$(NM_FOR_TARGET)"; export NM; \
1286 RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
1287 WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
1288 echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
1289 cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \
1291 /* | [A-Za-z]:[\\/]*) \
1292 topdir=$(srcdir) ;; \
1294 case "$(TARGET_SUBDIR)" in \
1295 .) topdir="../$(srcdir)" ;; \
1296 *) topdir="../../$(srcdir)" ;; \
1299 if [ "$(srcdir)" = "." ] ; then \
1300 if [ "$(TARGET_SUBDIR)" != "." ] ; then \
1301 if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
1302 if [ -f Makefile ]; then \
1303 if $(MAKE) distclean; then \
1317 srcdiroption="--srcdir=."; \
1320 srcdiroption="--srcdir=$${topdir}/$${dir}"; \
1321 libsrcdir="$$s/$${dir}"; \
1323 if [ -f $${libsrcdir}/configure ] ; then \
1324 rm -f no-such-file skip-this-dir; \
1325 CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
1326 $(CONFIG_ARGUMENTS) $${srcdiroption} \
1327 --with-target-subdir="$(TARGET_SUBDIR)"; \
1329 rm -f no-such-file skip-this-dir; \
1330 CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
1331 $(CONFIG_ARGUMENTS) $${srcdiroption} \
1332 --with-target-subdir="$(TARGET_SUBDIR)"; \
1334 if [ -f skip-this-dir ] ; then \
1336 rm -f skip-this-dir; \
1337 cd ..; rmdir $${dir} || true; \
1348 # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
1349 # To build a target all-X means to cd to X and make all.
1350 .PHONY: $(ALL_TARGET_MODULES)
1351 $(ALL_TARGET_MODULES):
1352 @dir=`echo $@ | sed -e 's/all-target-//'`; \
1353 if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1354 r=`pwd`; export r; \
1355 s=`cd $(srcdir); pwd`; export s; \
1357 (cd $(TARGET_SUBDIR)/$${dir}; \
1358 $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
1363 # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
1364 # To build a target install-X means to cd to X and make install.
1365 .PHONY: $(CHECK_TARGET_MODULES)
1366 $(CHECK_TARGET_MODULES):
1367 @dir=`echo $@ | sed -e 's/check-target-//'`; \
1368 if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1369 r=`pwd`; export r; \
1370 s=`cd $(srcdir); pwd`; export s; \
1372 (cd $(TARGET_SUBDIR)/$${dir}; \
1373 $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
1378 # This rule is used to install the modules which use
1379 # TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
1381 .PHONY: $(INSTALL_TARGET_MODULES)
1382 $(INSTALL_TARGET_MODULES): installdirs
1383 @dir=`echo $@ | sed -e 's/install-target-//'`; \
1384 if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
1385 r=`pwd`; export r; \
1386 s=`cd $(srcdir); pwd`; export s; \
1388 (cd $(TARGET_SUBDIR)/$${dir}; \
1389 $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
1394 # This rule is used to build the modules which use X11_FLAGS_TO_PASS.
1395 # To build a target all-X means to cd to X and make all.
1396 .PHONY: $(ALL_X11_MODULES)
1398 @dir=`echo $@ | sed -e 's/all-//'`; \
1399 if [ -f ./$${dir}/Makefile ] ; then \
1400 r=`pwd`; export r; \
1401 s=`cd $(srcdir); pwd`; export s; \
1404 $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
1409 # This rule is used to check the modules which use X11_FLAGS_TO_PASS.
1410 # To build a target check-X means to cd to X and make all.
1411 .PHONY: $(CHECK_X11_MODULES)
1412 $(CHECK_X11_MODULES):
1413 @dir=`echo $@ | sed -e 's/check-//'`; \
1414 if [ -f ./$${dir}/Makefile ] ; then \
1415 r=`pwd`; export r; \
1416 s=`cd $(srcdir); pwd`; export s; \
1419 $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
1424 # This rule is used to install the modules which use X11_FLAGS_TO_PASS.
1425 # To build a target install-X means to cd to X and make install.
1426 .PHONY: $(INSTALL_X11_MODULES)
1427 $(INSTALL_X11_MODULES): installdirs
1428 @dir=`echo $@ | sed -e 's/install-//'`; \
1429 if [ -f ./$${dir}/Makefile ] ; then \
1430 r=`pwd`; export r; \
1431 s=`cd $(srcdir); pwd`; export s; \
1434 $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
1439 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
1442 @if [ -f ./gcc/Makefile ] ; then \
1443 r=`pwd`; export r; \
1444 s=`cd $(srcdir); pwd`; export s; \
1446 (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
1451 # Building GCC uses some tools for rebuilding "source" files
1452 # like texinfo, bison/byacc, etc. So we must depend on those.
1454 # While building GCC, it may be necessary to run various target
1455 # programs like the assembler, linker, etc. So we depend on
1458 # In theory, on an SMP all those dependencies can be resolved
1461 .PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean
1462 bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean: all-bootstrap
1463 @r=`pwd`; export r; \
1464 s=`cd $(srcdir); pwd`; export s; \
1466 echo "Bootstrapping the compiler"; \
1467 cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $@
1468 @r=`pwd`; export r; \
1469 s=`cd $(srcdir); pwd`; export s; \
1471 *bootstrap4-lean ) \
1472 msg="Comparing stage3 and stage4 of the compiler"; \
1473 compare=compare3-lean ;; \
1474 *bootstrap4 ) msg="Comparing stage3 and stage4 of the compiler"; \
1475 compare=compare3 ;; \
1476 *-lean ) msg="Comparing stage2 and stage3 of the compiler"; \
1477 compare=compare-lean ;; \
1478 * ) msg="Comparing stage2 and stage3 of the compiler"; \
1479 compare=compare ;; \
1483 cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare
1484 @r=`pwd`; export r; \
1485 s=`cd $(srcdir); pwd` ; export s; \
1487 echo "Building runtime libraries"; \
1488 $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
1491 cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
1492 @r=`pwd`; export r; \
1493 s=`cd $(srcdir); pwd`; export s; \
1495 echo "Building the C and C++ compiler"; \
1496 cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++"
1497 @r=`pwd`; export r; \
1498 s=`cd $(srcdir); pwd` ; export s; \
1500 echo "Building runtime libraries"; \
1501 $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \
1502 LANGUAGES="c c++" all
1506 @if [ -f ./gcc/Makefile ] ; then \
1507 r=`pwd`; export r; \
1508 s=`cd $(srcdir); pwd`; export s; \
1510 (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
1517 @if [ -f ./gcc/Makefile ] ; then \
1518 r=`pwd`; export r; \
1519 s=`cd $(srcdir); pwd`; export s; \
1521 (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
1522 $(MAKE) check-target-libstdc++-v3 \
1529 @if [ -f ./gcc/Makefile ] ; then \
1530 r=`pwd`; export r; \
1531 s=`cd $(srcdir); pwd`; export s; \
1533 (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
1538 .PHONY: install-gcc-cross
1540 @if [ -f ./gcc/Makefile ] ; then \
1541 r=`pwd`; export r; \
1542 s=`cd $(srcdir); pwd`; export s; \
1544 (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++" install); \
1548 # EXPERIMENTAL STUFF
1549 # This rule is used to install the modules which use FLAGS_TO_PASS.
1550 # To build a target install-X means to cd to X and make install.
1551 .PHONY: install-dosrel
1552 install-dosrel: installdirs info
1553 @dir=`echo $@ | sed -e 's/install-//'`; \
1554 if [ -f ./$${dir}/Makefile ] ; then \
1555 r=`pwd`; export r; \
1556 s=`cd $(srcdir); pwd`; export s; \
1558 (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
1563 install-dosrel-fake:
1566 ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss
1567 ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++-v3
1569 # This is a list of inter-dependencies among modules.
1572 all-autoconf: all-m4 all-texinfo
1573 all-automake: all-m4 all-texinfo
1575 all-bfd: all-libiberty all-intl
1576 all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all-intl
1577 all-bison: all-texinfo
1578 configure-target-boehm-gc: $(ALL_GCC_CXX) configure-target-qthreads
1579 all-target-boehm-gc: configure-target-boehm-gc
1580 configure-target-bsp: $(ALL_GCC_C)
1581 all-target-bsp: configure-target-bsp
1584 all-cgen: all-libiberty
1586 configure-target-cygmon: $(ALL_GCC_C)
1587 all-target-cygmon: configure-target-cygmon all-target-libiberty all-target-libstub all-target-bsp
1589 all-dejagnu: all-tcl all-expect all-tk
1590 all-diff: all-libiberty
1592 all-emacs19: all-bison all-byacc
1594 configure-target-examples: $(ALL_GCC_C)
1595 all-target-examples: configure-target-examples
1596 all-expect: all-tcl all-tk
1597 all-fileutils: all-libiberty
1600 all-flex: all-libiberty all-bison all-byacc
1601 all-gas: all-libiberty all-opcodes all-bfd all-intl
1604 all-gcc: all-bison all-byacc all-binutils all-gas all-ld all-zlib
1605 all-bootstrap: all-libiberty all-texinfo all-bison all-byacc all-binutils all-gas all-ld all-zlib
1606 GDB_TK = all-tk all-tcl all-itcl all-tix all-libgui
1607 all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-bison all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
1610 configure-target-gperf: $(ALL_GCC_C)
1611 all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++-v3
1612 all-gprof: all-libiberty all-bfd all-opcodes all-intl
1613 all-grep: all-libiberty
1614 all-grez: all-libiberty all-bfd all-opcodes
1615 all-gui: all-gdb all-libproc all-target-librx
1617 all-gzip: all-libiberty
1618 all-hello: all-libiberty
1620 all-inet: all-tcl all-send-pr all-perl
1622 all-ispell: all-emacs19
1623 all-itcl: all-tcl all-tk all-tcl8.1 all-tk8.1
1624 all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex all-intl
1625 configure-target-libgloss: $(ALL_GCC)
1626 all-target-libgloss: configure-target-libgloss configure-target-newlib
1627 all-libgui: all-tcl all-tk all-tcl8.1 all-tk8.1 all-itcl
1629 configure-target-libffi: $(ALL_GCC_C)
1630 all-target-libffi: configure-target-libffi
1631 configure-target-libjava: $(ALL_GCC_CXX) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
1632 all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
1633 configure-target-librx: $(ALL_GCC_C)
1634 all-target-librx: configure-target-librx
1635 configure-target-libstdc++-v3: $(ALL_GCC_C)
1636 all-target-libstdc++-v3: configure-target-libstdc++-v3 all-target-libiberty
1637 configure-target-libstub: $(ALL_GCC_C)
1638 all-target-libstub: configure-target-libstub
1640 configure-target-libf2c: $(ALL_GCC_C)
1641 all-target-libf2c: configure-target-libf2c all-target-libiberty
1642 configure-target-libchill: $(ALL_GCC_C)
1643 all-target-libchill: configure-target-libchill all-target-libiberty
1644 configure-target-libobjc: $(ALL_GCC_C)
1645 all-target-libobjc: configure-target-libobjc all-target-libiberty
1646 all-m4: all-libiberty all-texinfo
1647 all-make: all-libiberty
1649 configure-target-newlib: $(ALL_GCC)
1650 all-target-newlib: configure-target-newlib
1651 configure-target-libtermcap: $(ALL_GCC_C)
1652 all-target-libtermcap: configure-target-libtermcap
1653 all-opcodes: all-bfd all-libiberty all-cgen
1654 all-patch: all-libiberty
1656 all-prms: all-libiberty
1657 configure-target-qthreads: $(ALL_GCC_C)
1658 all-target-qthreads: configure-target-qthreads
1661 all-recode: all-libiberty
1662 all-sed: all-libiberty
1663 all-send-pr: all-prms
1665 all-sim: all-libiberty all-bfd all-opcodes all-readline all-cgen
1666 all-snavigator: all-tcl all-tk all-itcl all-db all-grep all-libgui
1667 all-tar: all-libiberty
1670 all-tclX: all-tcl all-tk
1672 all-tk8.1: all-tcl8.1
1673 all-texinfo: all-libiberty
1675 all-tgas: all-libiberty all-bfd all-opcodes
1677 all-tix: all-tcl all-tk all-tcl8.1 all-tk8.1
1679 configure-target-winsup: $(ALL_GCC_C)
1680 all-target-winsup: all-target-libiberty all-target-libtermcap configure-target-winsup
1681 all-uudecode: all-libiberty
1684 configure-target-zlib: $(ALL_GCC_C)
1685 all-target-zlib: configure-target-zlib
1686 all-fastjar: all-zlib
1687 configure-target-fastjar: configure-target-zlib
1688 all-target-fastjar: configure-target-fastjar all-target-zlib
1689 configure-target-libiberty: $(ALL_GCC_C)
1690 all-target-libiberty: configure-target-libiberty
1691 all-target: $(ALL_TARGET_MODULES)
1692 install-target: $(INSTALL_TARGET_MODULES)
1693 install-gdb: install-tcl install-tk install-itcl install-tix install-libgui
1694 ### other supporting targets
1700 installdirs: mkinstalldirs
1701 $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS)
1703 dir.info: do-install-info
1704 if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
1705 $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
1706 mv -f dir.info.new dir.info ; \
1711 @echo "Building a full distribution of this tree isn't done"
1712 @echo "via 'make dist'. Check out the etc/ subdirectory"
1716 # Right now this just builds TAGS in each subdirectory. emacs19 has the
1717 # ability to use several tags files at once, so there is probably no need
1718 # to combine them into one big TAGS file (like CVS 1.3 does). We could
1719 # (if we felt like it) have this Makefile write a piece of elisp which
1720 # the user could load to tell emacs19 where all the TAGS files we just
1724 # with the gnu make, this is done automatically.
1726 Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag) $(gcc_version_trigger)
1727 $(SHELL) ./config.status
1730 # Support for building net releases
1732 # Files in devo used in any net release.
1733 # ChangeLog omitted because it may refer to files which are not in this
1734 # distribution (perhaps it would be better to include it anyway).
1735 DEVO_SUPPORT= README Makefile.in configure configure.in \
1736 config.guess config.if config.sub config move-if-change \
1737 mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
1738 COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
1739 mkinstalldirs ltconfig ltmain.sh missing ylwrap \
1740 libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh
1742 # Files in devo/etc used in any net release.
1743 # ChangeLog omitted because it may refer to files which are not in this
1744 # distribution (perhaps it would be better to include it anyway).
1745 ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
1746 make-stds.texi standards.info*
1748 # When you use `make setup-dirs' or `make taz' you should always redefine
1750 SUPPORT_FILES = list-of-support-files-for-tool-in-question
1752 # NOTE: No double quotes in the below. It is used within shell script
1754 VER = ` if grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
1755 sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
1757 sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
1762 taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
1763 $(MAKE) -f Makefile.in do-proto-toplev \
1764 TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
1765 MD5PROG="$(MD5PROG)" \
1766 SUPPORT_FILES="$(SUPPORT_FILES)"
1767 $(MAKE) -f Makefile.in do-md5sum \
1768 TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
1769 MD5PROG="$(MD5PROG)" \
1770 SUPPORT_FILES="$(SUPPORT_FILES)"
1771 $(MAKE) -f Makefile.in do-tar-bz2 \
1772 TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
1773 MD5PROG="$(MD5PROG)" \
1774 SUPPORT_FILES="$(SUPPORT_FILES)"
1777 gdb-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
1778 $(MAKE) -f Makefile.in do-proto-toplev \
1779 TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
1780 MD5PROG="$(MD5PROG)" \
1781 SUPPORT_FILES="$(SUPPORT_FILES)"
1782 $(MAKE) -f Makefile.in do-md5sum \
1783 TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
1784 MD5PROG="$(MD5PROG)" \
1785 SUPPORT_FILES="$(SUPPORT_FILES)"
1786 $(MAKE) -f Makefile.in do-djunpack \
1787 TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
1788 MD5PROG="$(MD5PROG)" \
1789 SUPPORT_FILES="$(SUPPORT_FILES)"
1790 $(MAKE) -f Makefile.in do-tar-bz2 \
1791 TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
1792 MD5PROG="$(MD5PROG)" \
1793 SUPPORT_FILES="$(SUPPORT_FILES)"
1795 .PHONY: do-proto-toplev
1796 do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
1797 echo "==> Making $(PACKAGE)-$(VER)/"
1798 # Take out texinfo from a few places.
1799 sed -e '/^all\.normal: /s/\all-texinfo //' \
1800 -e '/^ install-texinfo /d' \
1802 mv -f tmp Makefile.in
1805 [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
1806 || $(MAKE) $(CONFIGURE_TARGET_MODULES) \
1807 ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
1808 CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
1809 # Make links, and run "make diststuff" or "make info" when needed.
1810 rm -rf proto-toplev ; mkdir proto-toplev
1811 set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
1812 for d in $$dirs ; do \
1813 if [ -d $$d ]; then \
1814 if [ ! -f $$d/Makefile ] ; then true ; \
1815 elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
1816 (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
1817 elif grep '^info:' $$d/Makefile >/dev/null ; then \
1818 (cd $$d ; $(MAKE) info ) || exit 1 ; \
1820 if [ -d $$d/proto-$$d.dir ]; then \
1821 ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
1823 ln -s ../$$d proto-toplev/$$d ; \
1825 else ln -s ../$$d proto-toplev/$$d ; fi ; \
1827 cd etc && $(MAKE) info
1830 mkdir proto-toplev/etc
1831 (cd proto-toplev/etc; \
1832 for i in $(ETC_SUPPORT); do \
1833 ln -s ../../etc/$$i . ; \
1836 # Take out texinfo from configurable dirs
1837 rm proto-toplev/configure.in
1838 sed -e '/^host_tools=/s/texinfo //' \
1839 <configure.in >proto-toplev/configure.in
1841 mkdir proto-toplev/texinfo
1842 ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
1843 if test -r texinfo/util/tex3patch ; then \
1844 mkdir proto-toplev/texinfo/util && \
1845 ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
1847 chmod -R og=u . || chmod og=u `find . -print`
1849 -rm -f $(PACKAGE)-$(VER)
1850 ln -s proto-toplev $(PACKAGE)-$(VER)
1854 echo "==> Making $(PACKAGE)-$(VER).tar.bz2"
1855 -rm -f $(PACKAGE)-$(VER).tar.bz2
1856 find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
1857 | tar cTfh - $(PACKAGE)-$(VER).tar
1858 $(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
1862 echo "==> Adding md5 checksum to top-level directory"
1863 cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \
1864 | xargs $(MD5PROG) > ../md5.sum
1865 mv md5.sum proto-toplev
1869 echo "==> Adding updated djunpack.bat to top-level directory"
1870 echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/'
1871 sed < djunpack.bat > djunpack.new \
1872 -e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/'
1873 mv djunpack.new djunpack.bat
1874 -rm -f proto-toplev/djunpack.bat
1875 ln -s ../djunpack.bat proto-toplev/djunpack.bat
1877 TEXINFO_SUPPORT= texinfo/texinfo.tex
1878 DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
1881 GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
1882 gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
1883 $(MAKE) -f Makefile.in taz TOOL=gas \
1884 MD5PROG="$(MD5PROG)" \
1885 SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
1887 # The FSF "binutils" release includes gprof and ld.
1888 .PHONY: binutils.tar.bz2
1889 BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep
1890 binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
1891 $(MAKE) -f Makefile.in taz TOOL=binutils \
1892 MD5PROG="$(MD5PROG)" \
1893 SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
1895 .PHONY: gas+binutils.tar.bz2
1896 GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
1897 gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
1898 $(MAKE) -f Makefile.in taz TOOL=gas \
1899 MD5PROG="$(MD5PROG)" \
1900 SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
1902 GNATS_SUPPORT_DIRS=include libiberty send-pr
1903 gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
1904 $(MAKE) -f Makefile.in taz TOOL=gnats \
1905 MD5PROG="$(MD5PROG)" \
1906 SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
1909 GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
1910 gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
1911 $(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
1912 MD5PROG="$(MD5PROG)" \
1913 SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
1915 .PHONY: dejagnu.tar.bz2
1916 DEJAGNU_SUPPORT_DIRS= tcl expect libiberty
1917 dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
1918 $(MAKE) -f Makefile.in taz TOOL=dejagnu \
1919 MD5PROG="$(MD5PROG)" \
1920 SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"
1922 .PHONY: gdb+dejagnu.tar.bz2
1923 GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
1924 gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
1925 $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
1926 MD5PROG="$(MD5PROG)" \
1927 SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
1929 .PHONY: insight.tar.bz2
1930 INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
1931 insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
1932 $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
1933 MD5PROG="$(MD5PROG)" \
1934 SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
1936 .PHONY: insight+dejagnu.tar.bz2
1937 INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
1938 insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
1939 $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
1940 MD5PROG="$(MD5PROG)" \
1941 SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
1943 .PHONY: newlib.tar.bz2
1944 NEWLIB_SUPPORT_DIRS=libgloss
1945 # taz configures for the sun4 target which won't configure newlib.
1946 # We need newlib configured so that the .info files are made.
1947 # Unfortunately, it is not enough to just configure newlib separately:
1948 # taz will build the .info files but since SUBDIRS won't contain newlib,
1949 # distclean won't be run (leaving Makefile, config.status, and the tmp files
1950 # used in building the .info files, eg: *.def, *.ref).
1951 # The problem isn't solvable however without a lot of extra work because
1952 # target libraries are built in subdir $(target_alias) which gets nuked during
1953 # the make distclean. For now punt on the issue of shipping newlib info files
1954 # with newlib net releases and wait for a day when some native target (sun4?)
1955 # supports newlib (if only minimally).
1956 newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
1957 $(MAKE) -f Makefile.in taz TOOL=newlib \
1958 MD5PROG="$(MD5PROG)" \
1959 SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
1960 DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
1965 # end of Makefile.in