From bb8eb6f13a247a456c186ef4cebb3514a37462cc Mon Sep 17 00:00:00 2001 From: dnovillo Date: Fri, 10 Aug 2007 20:02:33 +0000 Subject: [PATCH 1/1] * tree-ssa.doxy: Update for doxygen 1.5. Include all the files in the middle and back ends. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@127349 138bc75d-0d04-0410-961f-82ee72b054a4 --- contrib/ChangeLog | 5 + contrib/tree-ssa.doxy | 324 +++++++++++++++++++++++++++++++++++++------------- 2 files changed, 244 insertions(+), 85 deletions(-) diff --git a/contrib/ChangeLog b/contrib/ChangeLog index ca54682ac1d..a02afbab588 100644 --- a/contrib/ChangeLog +++ b/contrib/ChangeLog @@ -1,3 +1,8 @@ +2007-08-10 Diego Novillo + + * tree-ssa.doxy: Update for doxygen 1.5. + Include all the files in the middle and back ends. + 2007-06-30 Hans-Peter Nilsson * gcc_update (files_and_dependencies): Handle diff --git a/contrib/tree-ssa.doxy b/contrib/tree-ssa.doxy index 957e2a6a796..7a284e754aa 100644 --- a/contrib/tree-ssa.doxy +++ b/contrib/tree-ssa.doxy @@ -1,4 +1,4 @@ -# Doxyfile 1.3.5 +# Doxyfile 1.5.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project @@ -27,7 +27,8 @@ OUTPUT_DIRECTORY = @OUTPUT_DIRECTORY@ # by executing (via popen()) the command , where # is the value of the INPUT_FILTER tag, and is the name of an # input file. Doxygen will then use the output that the filter program writes -# to standard output. +# to standard output. If FILTER_PATTERNS is specified, this tag will be +# ignored. INPUT_FILTER = @INPUT_FILTER@ @@ -40,10 +41,18 @@ INPUT_FILTER = @INPUT_FILTER@ # Project related configuration options #--------------------------------------------------------------------------- +# This tag specifies the encoding used for all characters in the config file that +# follow. The default is UTF-8 which is also the encoding used for all text before +# the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into +# libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of +# possible encodings. + +DOXYFILE_ENCODING = UTF-8 + # The PROJECT_NAME tag is a single word (or a sequence of words surrounded # by quotes) that should identify the project. -PROJECT_NAME = "Tree SSA" +PROJECT_NAME = "GCC Middle and Back End API Reference" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or @@ -51,28 +60,27 @@ PROJECT_NAME = "Tree SSA" PROJECT_NUMBER = +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. # The default language is English, other supported languages are: -# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en -# (Japanese with English messages), Korean, Norwegian, Polish, Portuguese, -# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, +# Italian, Japanese, Japanese-en (Japanese with English messages), Korean, +# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, +# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. OUTPUT_LANGUAGE = English -# This tag can be used to specify the encoding used in the generated output. -# The encoding is not always determined by the language that is chosen, -# but also whether or not the output is meant for Windows or non-Windows users. -# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES -# forces the Windows encoding (this is the default for the Windows binary), -# whereas setting the tag to NO uses a Unix-style encoding (the default for -# all platforms other than Windows). - -USE_WINDOWS_ENCODING = NO - # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will # include brief member descriptions after the members that are listed in # the file and class documentation (similar to JavaDoc). @@ -90,11 +98,12 @@ REPEAT_BRIEF = YES # This tag implements a quasi-intelligent brief description abbreviator # that is used to form the text in various listings. Each string # in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is used -# as the annotated text. Otherwise, the brief description is used as-is. If left -# blank, the following values are used ("$name" is automatically replaced with the -# name of the entity): "The $name class" "The $name widget" "The $name file" -# "is" "provides" "specifies" "contains" "represents" "a" "an" "the" +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" ABBREVIATE_BRIEF = @@ -104,10 +113,10 @@ ABBREVIATE_BRIEF = ALWAYS_DETAILED_SEC = YES -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited -# members of a class in the documentation of that class as if those members were -# ordinary class members. Constructors, destructors and assignment operators of -# the base classes will not be shown. +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. INLINE_INHERITED_MEMB = YES @@ -120,10 +129,21 @@ FULL_PATH_NAMES = NO # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag # can be used to strip a user-defined part of the path. Stripping is # only done if one of the specified strings matches the left-hand part of -# the path. It is allowed to use relative paths in the argument list. +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. STRIP_FROM_PATH = +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter # (but less readable) file names. This can be useful is your file systems # doesn't support long names like on DOS, Mac, or CD-ROM. @@ -159,12 +179,11 @@ DETAILS_AT_TOP = NO INHERIT_DOCS = YES -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. -DISTRIBUTE_GROUP_DOC = NO +SEPARATE_MEMBER_PAGES = NO # The TAB_SIZE tag can be used to set the number of spaces in a tab. # Doxygen uses this value to replace tabs by spaces in code fragments. @@ -180,20 +199,41 @@ TAB_SIZE = 8 ALIASES = -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. # For instance, some of the names that are used will be different. The list # of all members will be omitted, etc. OPTIMIZE_OUTPUT_FOR_C = YES -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources -# only. Doxygen will then generate output that is more tailored for Java. +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for Java. # For instance, namespaces will be presented as packages, qualified scopes # will look different, etc. OPTIMIZE_OUTPUT_JAVA = NO +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to +# include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + # Set the SUBGROUPING tag to YES (the default) to allow class member groups of # the same type (for instance a group of public functions) to be put as a # subgroup of that type (e.g. under the Public Functions section). Set it to @@ -229,6 +269,13 @@ EXTRACT_STATIC = YES EXTRACT_LOCAL_CLASSES = YES +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all # undocumented members of documented classes, files or namespaces. # If set to NO (the default) these members will be included in the @@ -269,7 +316,7 @@ INTERNAL_DOCS = NO # file names in lower-case letters. If set to YES upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# users are advised to set this option to NO. +# and Mac users are advised to set this option to NO. CASE_SENSE_NAMES = YES @@ -297,6 +344,23 @@ INLINE_INFO = YES SORT_MEMBER_DOCS = YES +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + # The GENERATE_TODOLIST tag can be used to enable (YES) or # disable (NO) the todo list. This list is created by putting \todo # commands in the documentation. @@ -342,6 +406,22 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from the +# version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- @@ -370,10 +450,20 @@ WARN_IF_UNDOCUMENTED = YES WARN_IF_DOC_ERROR = YES +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + # The WARN_FORMAT tag determines the format of the warning messages that # doxygen can produce. The string should contain the $file, $line, and $text # tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) WARN_FORMAT = "$file:$line: $text" @@ -392,20 +482,23 @@ WARN_LOGFILE = # directories like "/usr/src/myproject". Separate the files or directories # with spaces. -INPUT = . +INPUT = gcc + +# This tag can be used to specify the character encoding of the source files that +# doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default +# input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding. +# See http://www.gnu.org/software/libiconv for the list of possible encodings. + +INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # and *.h) to filter out the source-files in the directories. If left # blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp -# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py -FILE_PATTERNS = tree* \ - *mudflap* \ - c-simplify.c \ - gimpl* \ - domwalk* +FILE_PATTERNS = # The RECURSIVE tag can be used to turn specify whether or not subdirectories # should be searched for input files as well. Possible values are YES and NO. @@ -419,16 +512,26 @@ RECURSIVE = NO EXCLUDE = -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories -# that are symbolic links (a Unix filesystem feature) are excluded from the input. +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded +# from the input. EXCLUDE_SYMLINKS = NO # If the value of the INPUT tag contains directories, you can use the # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* -EXCLUDE_PATTERNS = +EXCLUDE_PATTERNS = c-* */testsuite/* */config/* */.svn/* */po/* + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the output. +# The symbol name can be a fully qualified name, a word, or if the wildcard * is used, +# a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = # The EXAMPLE_PATH tag can be used to specify one or more files or # directories that contain example code fragments that are included (see @@ -456,6 +559,15 @@ EXAMPLE_RECURSIVE = NO IMAGE_PATH = +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = + # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using # INPUT_FILTER) will be used to filter the input files when producing source # files to browse (i.e. when SOURCE_BROWSER is set to YES). @@ -471,12 +583,12 @@ FILTER_SOURCE_FILES = NO # Note: To get rid of all source code in the generated output, make sure also # VERBATIM_HEADERS is set to NO. -SOURCE_BROWSER = YES +SOURCE_BROWSER = NO # Setting the INLINE_SOURCES tag to YES will include the body # of functions and classes directly in the documentation. -INLINE_SOURCES = YES +INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code @@ -496,6 +608,21 @@ REFERENCED_BY_RELATION = YES REFERENCES_RELATION = YES +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. Otherwise they will link to the documentstion. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen # will generate a verbatim copy of the header file for each class for # which an include is specified. Set to NO to disable this. @@ -629,7 +756,7 @@ ENUM_VALUES_PER_LINE = 4 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are # probably better off using the HTML help feature. -GENERATE_TREEVIEW = NO +GENERATE_TREEVIEW = YES # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree @@ -882,7 +1009,7 @@ MACRO_EXPANSION = NO # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES # then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_PREDEFINED tags. +# PREDEFINED and EXPAND_AS_DEFINED tags. EXPAND_ONLY_PREDEF = NO @@ -908,7 +1035,9 @@ INCLUDE_FILE_PATTERNS = # are defined before the preprocessor is started (similar to the -D option of # gcc). The argument of the tag is a list of macros of the form: name # or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. PREDEFINED = @@ -922,13 +1051,13 @@ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then # doxygen's preprocessor will remove all function-like macros that are alone # on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse the -# parser if not removed. +# function macros are typically used for boiler-plate code, and will confuse +# the parser if not removed. SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- -# Configuration::addtions related to external references +# Configuration::additions related to external references #--------------------------------------------------------------------------- # The TAGFILES option can be used to specify one or more tagfiles. @@ -975,13 +1104,22 @@ PERL_PATH = /usr/bin/perl #--------------------------------------------------------------------------- # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or -# super classes. Setting the tag to NO turns the diagrams off. Note that this -# option is superseded by the HAVE_DOT option below. This is only a fallback. It is -# recommended to install and use dot, since it yields more powerful graphs. +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more +# powerful graphs. CLASS_DIAGRAMS = YES +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to +# produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to +# specify the directory where the mscgen tool resides. If left empty the tool is assumed to +# be found in the default search path. + +MSCGEN_PATH = + # If set to YES, the inheritance and collaboration graphs will hide # inheritance and usage relations if the target is undocumented # or is not a class. @@ -1009,6 +1147,11 @@ CLASS_GRAPH = YES COLLABORATION_GRAPH = YES +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + # If the UML_LOOK tag is set to YES doxygen will generate inheritance and # collaboration diagrams in a style similar to the OMG's Unified Modeling # Language. @@ -1042,11 +1185,26 @@ INCLUDED_BY_GRAPH = YES CALL_GRAPH = NO +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# generate a caller dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. + +CALLER_GRAPH = NO + # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # will graphical hierarchy of all classes instead of a textual one. GRAPHICAL_HIERARCHY = YES +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. Possible values are png, jpg, or gif # If left blank png will be used. @@ -1054,7 +1212,7 @@ GRAPHICAL_HIERARCHY = YES DOT_IMAGE_FORMAT = png # The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found on the path. +# found. If left blank, it is assumed the dot tool can be found in the path. DOT_PATH = @@ -1064,32 +1222,28 @@ DOT_PATH = DOTFILE_DIRS = -# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. +# The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen will always +# show the root nodes and its direct children regardless of this setting. -MAX_DOT_GRAPH_WIDTH = 1024 +DOT_GRAPH_MAX_NODES = 50 -# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, which results in a white background. +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). -MAX_DOT_GRAPH_HEIGHT = 1024 +DOT_TRANSPARENT = NO -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes that -# lay further from the root node will be omitted. Note that setting this option to -# 1 or 2 may greatly reduce the computation time needed for large code bases. Also -# note that a graph may be further truncated if the graph's image dimensions are -# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). -# If 0 is used for the depth value (the default), the graph is not depth-constrained. +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. -MAX_DOT_GRAPH_DEPTH = 0 +DOT_MULTI_TARGETS = NO # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will # generate a legend page explaining the meaning of the various boxes and @@ -1104,7 +1258,7 @@ GENERATE_LEGEND = YES DOT_CLEANUP = YES #--------------------------------------------------------------------------- -# Configuration::addtions related to the search engine +# Configuration::additions related to the search engine #--------------------------------------------------------------------------- # The SEARCHENGINE tag specifies whether or not a search engine should be -- 2.11.0