OSDN Git Service

Initial revision
authortromey <tromey@138bc75d-0d04-0410-961f-82ee72b054a4>
Fri, 17 Aug 2001 18:39:15 +0000 (18:39 +0000)
committertromey <tromey@138bc75d-0d04-0410-961f-82ee72b054a4>
Fri, 17 Aug 2001 18:39:15 +0000 (18:39 +0000)
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@44969 138bc75d-0d04-0410-961f-82ee72b054a4

15 files changed:
boehm-gc/Makefile.direct [new file with mode: 0644]
boehm-gc/config.guess [new file with mode: 0755]
boehm-gc/config.sub [new file with mode: 0755]
boehm-gc/digimars.mak [new file with mode: 0644]
boehm-gc/doc/README.autoconf [new file with mode: 0644]
boehm-gc/doc/README.macros [new file with mode: 0644]
boehm-gc/doc/debugging.html [new file with mode: 0644]
boehm-gc/doc/gcdescr.html [new file with mode: 0644]
boehm-gc/doc/tree.html [new file with mode: 0644]
boehm-gc/gcname.c [new file with mode: 0644]
boehm-gc/install-sh [new file with mode: 0755]
boehm-gc/libtool.m4 [new file with mode: 0644]
boehm-gc/ltconfig [new file with mode: 0755]
boehm-gc/ltmain.sh [new file with mode: 0644]
boehm-gc/mkinstalldirs [new file with mode: 0755]

diff --git a/boehm-gc/Makefile.direct b/boehm-gc/Makefile.direct
new file mode 100644 (file)
index 0000000..a5d24c6
--- /dev/null
@@ -0,0 +1,597 @@
+# This is the original manually generated Makefile.  It may still be used
+# to build the collector.
+#
+# Primary targets:
+# gc.a - builds basic library
+# c++ - adds C++ interface to library
+# cords - adds cords (heavyweight strings) to library
+# test - prints porting information, then builds basic version of gc.a,
+#               and runs some tests of collector and cords.  Does not add cords or
+#       c++ interface to gc.a
+# cord/de - builds dumb editor based on cords.
+ABI_FLAG= 
+CC=cc $(ABI_FLAG)
+CXX=g++ $(ABI_FLAG)
+AS=as $(ABI_FLAG)
+#  The above doesn't work with gas, which doesn't run cpp.
+#  Define AS as `gcc -c -x assembler-with-cpp' instead.
+#  Under Irix 6, you will have to specify the ABI (-o32, -n32, or -64)
+#  if you use something other than the default ABI on your machine.
+
+# Redefining srcdir allows object code for the nonPCR version of the collector
+# to be generated in different directories.
+srcdir= .
+VPATH= $(srcdir)
+
+CFLAGS= -O -I$(srcdir)/include -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EXECUTE_PERMISSION -DSILENT -DALL_INTERIOR_POINTERS
+
+# To build the parallel collector on Linux, add to the above:
+# -DGC_LINUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC
+# To build the parallel collector n a static library on HP/UX, add to the above:
+# -DGC_HPUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC -DUSE_HPUX_TLS -D_POSIX_C_SOURCE=199506L
+
+# HOSTCC and HOSTCFLAGS are used to build executables that will be run as
+# part of the build process, i.e. on the build machine.  These will usually
+# be the same as CC and CFLAGS, except in a cross-compilation environment.
+# Note that HOSTCFLAGS should include any -D flags that affect thread support.
+HOSTCC=$(CC)
+HOSTCFLAGS=$(CFLAGS)
+
+# For dynamic library builds, it may be necessary to add flags to generate
+# PIC code, e.g. -fPIC on Linux.
+
+# Setjmp_test may yield overly optimistic results when compiled
+# without optimization.
+
+# These define arguments influence the collector configuration:
+# -DSILENT disables statistics printing, and improves performance.
+# -DFIND_LEAK causes GC_find_leak to be initially set.
+#   This causes the collector to assume that all inaccessible
+#   objects should have been explicitly deallocated, and reports exceptions.
+#   Finalization and the test program are not usable in this mode.
+# -DGC_SOLARIS_THREADS enables support for Solaris (thr_) threads.
+#   (Clients should also define GC_SOLARIS_THREADS and then include
+#   gc.h before performing thr_ or dl* or GC_ operations.)
+#   Must also define -D_REENTRANT.
+# -DGC_SOLARIS_PTHREADS enables support for Solaris pthreads.
+#   Define SOLARIS_THREADS as well.
+# -DGC_IRIX_THREADS enables support for Irix pthreads.  See README.irix.
+# -DGC_HPUX_THREADS enables support for HP/UX 11 pthreads.
+#   Also requires -D_REENTRANT or -D_POSIX_C_SOURCE=199506L. See README.hp.
+# -DGC_LINUX_THREADS enables support for Xavier Leroy's Linux threads.
+#   see README.linux.  -D_REENTRANT may also be required.
+# -DALL_INTERIOR_POINTERS allows all pointers to the interior
+#   of objects to be recognized.  (See gc_priv.h for consequences.)
+#   Alternatively, GC_all_interior_pointers can be set at process
+#   initialization time.
+# -DSMALL_CONFIG tries to tune the collector for small heap sizes,
+#   usually causing it to use less space in such situations.
+#   Incremental collection no longer works in this case.
+# -DLARGE_CONFIG tunes the collector for unusually large heaps.
+#   Necessary for heaps larger than about 500 MB on most machines.
+#   Recommended for heaps larger than about 64 MB.
+# -DDONT_ADD_BYTE_AT_END is meaningful only with -DALL_INTERIOR_POINTERS or
+#   GC_all_interior_pointers = 1.  Normally -DALL_INTERIOR_POINTERS
+#   causes all objects to be padded so that pointers just past the end of
+#   an object can be recognized.  This can be expensive.  (The padding
+#   is normally more than one byte due to alignment constraints.)
+#   -DDONT_ADD_BYTE_AT_END disables the padding.
+# -DNO_SIGNALS does not disable signals during critical parts of
+#   the GC process.  This is no less correct than many malloc 
+#   implementations, and it sometimes has a significant performance
+#   impact.  However, it is dangerous for many not-quite-ANSI C
+#   programs that call things like printf in asynchronous signal handlers.
+#   This is on by default.  Turning it off has not been extensively tested with
+#   compilers that reorder stores.  It should have been.
+# -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not
+#   have execute permission, i.e. it may be impossible to execute
+#   code from the heap.  Currently this only affects the incremental
+#   collector on UNIX machines.  It may greatly improve its performance,
+#   since this may avoid some expensive cache synchronization.
+# -DGC_NO_OPERATOR_NEW_ARRAY declares that the C++ compiler does not support
+#   the  new syntax "operator new[]" for allocating and deleting arrays.
+#   See gc_cpp.h for details.  No effect on the C part of the collector.
+#   This is defined implicitly in a few environments.  Must also be defined
+#   by clients that use gc_cpp.h.
+# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be defined
+#   as aliases for X, GC_realloc, and GC_free, respectively.
+#   Calloc is redefined in terms of the new malloc.  X should
+#   be either GC_malloc or GC_malloc_uncollectable, or
+#   GC_debug_malloc_replacement.  (The latter invokes GC_debug_malloc
+#   with dummy source location information, but still results in
+#   properly remembered call stacks on Linux/X86 and Solaris/SPARC.)
+#   The former is occasionally useful for working around leaks in code
+#   you don't want to (or can't) look at.  It may not work for
+#   existing code, but it often does.  Neither works on all platforms,
+#   since some ports use malloc or calloc to obtain system memory.
+#   (Probably works for UNIX, and win32.)
+# -DREDIRECT_REALLOC=X causes GC_realloc to be redirected to X.
+#   The canonical use is -DREDIRECT_REALLOC=GC_debug_realloc_replacement,
+#   together with -DREDIRECT_MALLOC=GC_debug_malloc_replacement to
+#   generate leak reports with call stacks for both malloc and realloc.
+# -DIGNORE_FREE turns calls to free into a noop.  Only useful with
+#   -DREDIRECT_MALLOC.
+# -DNO_DEBUGGING removes GC_dump and the debugging routines it calls.
+#   Reduces code size slightly at the expense of debuggability.
+# -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of
+#   order by specifying a nonstandard finalization mark procedure  (see
+#   finalize.c).  Objects reachable from finalizable objects will be marked
+#   in a sepearte postpass, and hence their memory won't be reclaimed.
+#   Not recommended unless you are implementing a language that specifies
+#   these semantics.  Since 5.0, determines only only the initial value
+#   of GC_java_finalization variable.
+# -DFINALIZE_ON_DEMAND causes finalizers to be run only in response
+#   to explicit GC_invoke_finalizers() calls.
+#   In 5.0 this became runtime adjustable, and this only determines the
+#   initial value of GC_finalize_on_demand.
+# -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.
+#   This is useful if either the vendor malloc implementation is poor,
+#   or if REDIRECT_MALLOC is used.
+# -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly
+#   sets the heap block size.  Each heap block is devoted to a single size and
+#   kind of object.  For the incremental collector it makes sense to match
+#   the most likely page size.  Otherwise large values result in more
+#   fragmentation, but generally better performance for large heaps.
+# -DUSE_MMAP use MMAP instead of sbrk to get new memory.
+#   Works for Solaris and Irix.
+# -DUSE_MUNMAP causes memory to be returned to the OS under the right
+#   circumstances.  This currently disables VM-based incremental collection.
+#   This is currently experimental, and works only under some Unix and
+#   Linux versions.
+# -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than
+#   GC_scratch_alloc() to get stack memory.
+# -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever
+#   the garbage collector detects a value that looks almost, but not quite,
+#   like a pointer, print both the address containing the value, and the
+#   value of the near-bogus-pointer.  Can be used to identifiy regions of
+#   memory that are likely to contribute misidentified pointers.
+# -DKEEP_BACK_PTRS Add code to save back pointers in debugging headers
+#   for objects allocated with the debugging allocator.  If all objects
+#   through GC_MALLOC with GC_DEBUG defined, this allows the client
+#   to determine how particular or randomly chosen objects are reachable
+#   for debugging/profiling purposes.  The gc_backptr.h interface is
+#   implemented only if this is defined.
+# -DGC_ASSERTIONS Enable some internal GC assertion checking.  Currently
+#   this facility is only used in a few places.  It is intended primarily
+#   for debugging of the garbage collector itself, but could also
+# -DDBG_HDRS_ALL Make sure that all objects have debug headers.  Increases
+#   the reliability (from 99.9999% to 100%) of some of the debugging
+#   code (especially KEEP_BACK_PTRS).  Makes -DSHORT_DBG_HDRS possible.
+#   Assumes that all client allocation is done through debugging
+#   allocators.
+# -DSHORT_DBG_HDRS Assume that all objects have debug headers.  Shorten
+#   the headers to minimize object size, at the expense of checking for
+#   writes past the end of an object.  This is intended for environments
+#   in which most client code is written in a "safe" language, such as
+#   Scheme or Java.  Assumes that all client allocation is done using
+#   the GC_debug_ functions, or through the macros that expand to these,
+#   or by redirecting malloc to GC_debug_malloc_replacement.
+#   (Also eliminates the field for the requested object size.)
+#   occasionally be useful for debugging of client code.  Slows down the
+#   collector somewhat, but not drastically.
+# -DSAVE_CALL_COUNT=<n> Set the number of call frames saved with objects
+#   allocated through the debugging interface.  Affects the amount of
+#   information generated in leak reports.  Only matters on platforms
+#   on which we can quickly generate call stacks, currently Linux/(X86 & SPARC)
+#   and Solaris/SPARC.  Turns on call chain saving on X86.  On X86, client
+#   code should NOT be compiled with -fomit-frame-pointer.
+# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
+#   altered stubborn objects, at substantial performance cost.
+#   Use only for debugging of the incremental collector.
+# -DGC_GCJ_SUPPORT includes support for gcj (and possibly other systems
+#   that include a pointer to a type descriptor in each allocated object).
+#   Building this way requires an ANSI C compiler.
+# -DUSE_I686_PREFETCH causes the collector to issue Pentium III style
+#   prefetch instructions.  No effect except on X86 Linux platforms.
+#   Assumes a very recent gcc-compatible compiler and assembler.
+#   (Gas prefetcht0 support was added around May 1999.)
+#   Empirically the code appears to still run correctly on Pentium II
+#   processors, though with no performance benefit.  May not run on other
+#   X86 processors?  In some cases this improves performance by
+#   15% or so.
+# -DUSE_3DNOW_PREFETCH causes the collector to issue AMD 3DNow style
+#   prefetch instructions.  Same restrictions as USE_I686_PREFETCH.
+#   UNTESTED!!
+# -DGC_USE_LD_WRAP in combination with the gld flags listed in README.linux
+#   causes the collector some system and pthread calls in a more transparent
+#   fashion than the usual macro-based approach.  Requires GNU ld, and
+#   currently probably works only with Linux.
+# -DTHREAD_LOCAL_ALLOC defines GC_local_malloc(), GC_local_malloc_atomic()
+#   and GC_local_gcj_malloc().  Needed for gc_gcj.h interface.  These allocate
+#   in a way that usually does not involve acquisition of a global lock.
+#   Currently requires -DGC_LINUX_THREADS, but should be easy to port to
+#   other pthreads environments.  Recommended for multiprocessors.
+# -DPARALLEL_MARK allows the marker to run in multiple threads.  Recommended
+#   for multiprocessors.  Currently requires Linux on X86 or IA64, though
+#   support for other Posix platforms should be fairly easy to add,
+#   if the thread implementation is otherwise supported.
+# -DNO_GETENV prevents the collector from looking at environment variables.
+#   These may otherwise alter its configuration, or turn off GC altogether.
+#   I don't know of a reason to disable this, except possibly if the
+#   resulting process runs as a privileged user?
+# -DSTUBBORN_ALLOC allows allocation of "hard to change" objects, and thus
+#   makes incremental collection easier.  Was enabled by default until 6.0.
+#   Rarely used, to my knowledge.
+#
+
+CXXFLAGS= $(CFLAGS) 
+AR= ar
+RANLIB= ranlib
+
+
+OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o gcj_mlc.o specific.o gc_dlopen.o
+
+CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c gcj_mlc.c specific.c gc_dlopen.c
+
+CORD_SRCS=  cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c include/cord.h include/ec.h include/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC
+
+CORD_OBJS=  cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
+
+SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.s \
+    sparc_mach_dep.s include/gc.h include/gc_typed.h \
+    include/private/gc_hdrs.h include/private/gc_priv.h \
+    include/private/gcconfig.h include/private/gc_pmark.h \
+    include/gc_inl.h include/gc_inline.h include/gc_mark.h \
+    threadlibs.c if_mach.c if_not_there.c gc_cpp.cc include/gc_cpp.h \
+    gcname.c include/weakpointer.h include/private/gc_locks.h \
+    gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h \
+    include/new_gc_alloc.h include/javaxfc.h sparc_sunos4_mach_dep.s \
+    sparc_netbsd_mach_dep.s \
+    include/private/solaris_threads.h include/gc_backptr.h \
+    hpux_test_and_clear.s include/gc_gcj.h \
+    include/gc_local_alloc.h include/private/dbg_mlc.h \
+    include/private/specific.h powerpc_macosx_mach_dep.s \
+    include/leak_detector.h include/gc_amiga_redirects.h \
+    include/gc_pthread_redirects.h $(CORD_SRCS)
+
+DOC_FILES= README.QUICK doc/README.Mac doc/README.MacOSX doc/README.OS2 \
+       doc/README.amiga doc/README.cords doc/debugging.html \
+       doc/README.dj doc/README.hp doc/README.linux doc/README.rs6000 \
+       doc/README.sgi doc/README.solaris2 doc/README.uts \
+       doc/README.win32 doc/barrett_diagram doc/README \
+        doc/README.contributors doc/README.changes doc/gc.man \
+       doc/README.environment doc/tree.html doc/gcdescr.html \
+       doc/README.autoconf doc/README.macros
+
+TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \
+       tests/leak_test.c tests/thread_leak_test.c
+
+GNU_BUILD_FILES= configure.in Makefile.am configure acinclude.m4 \
+                libtool.m4 install-sh configure.host Makefile.in \
+                aclocal.m4 config.sub config.guess ltconfig \
+                ltmain.sh mkinstalldirs
+
+OTHER_MAKEFILES= OS2_MAKEFILE NT_MAKEFILE NT_THREADS_MAKEFILE gc.mak \
+                BCC_MAKEFILE EMX_MAKEFILE WCC_MAKEFILE Makefile.dj \
+                PCR-Makefile SMakefile.amiga Makefile.DLLs \
+                digimars.mak Makefile.direct
+#      Makefile and Makefile.direct are copies of each other.
+
+OTHER_FILES= Makefile setjmp_t.c callprocs pc_excludes \
+           MacProjects.sit.hqx MacOS.c \
+           Mac_files/datastart.c Mac_files/dataend.c \
+           Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
+           add_gc_prefix.c gc_cpp.cpp win32_threads.c \
+          version.h AmigaOS.c \
+          $(TESTS) $(GNU_BUILD_FILES) $(OTHER_MAKEFILES)
+
+CORD_INCLUDE_FILES= $(srcdir)/include/gc.h $(srcdir)/include/cord.h \
+       $(srcdir)/include/ec.h $(srcdir)/include/private/cord_pos.h
+
+UTILS= if_mach if_not_there threadlibs
+
+# Libraries needed for curses applications.  Only needed for de.
+CURSES= -lcurses -ltermlib
+
+# The following is irrelevant on most systems.  But a few
+# versions of make otherwise fork the shell specified in
+# the SHELL environment variable.
+SHELL= /bin/sh
+
+SPECIALCFLAGS = -I$(srcdir)/include
+# Alternative flags to the C compiler for mach_dep.c.
+# Mach_dep.c often doesn't like optimization, and it's
+# not time-critical anyway.
+# Set SPECIALCFLAGS to -q nodirect_code on Encore.
+
+all: gc.a gctest
+
+BSD-pkg-all: bsd-libgc.a
+
+bsd-libgc.a:
+       $(MAKE) CFLAGS="$(CFLAGS)" clean c++-t
+       mv gc.a bsd-libgc.a
+
+BSD-pkg-install: BSD-pkg-all
+       ${CP} bsd-libgc.a libgc.a
+       ${INSTALL_DATA} libgc.a ${PREFIX}/lib
+       ${INSTALL_DATA} gc.h gc_cpp.h ${PREFIX}/include
+
+pcr: PCR-Makefile include/private/gc_private.h include/private/gc_hdrs.h \
+include/private/gc_locks.h include/gc.h include/private/gcconfig.h \
+mach_dep.o $(SRCS)
+       $(MAKE) -f PCR-Makefile depend
+       $(MAKE) -f PCR-Makefile
+
+$(OBJS) tests/test.o dyn_load.o dyn_load_sunos53.o: \
+    $(srcdir)/include/private/gc_priv.h \
+    $(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \
+    $(srcdir)/include/gc.h \
+    $(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \
+    Makefile
+# The dependency on Makefile is needed.  Changing
+# options such as -DSILENT affects the size of GC_arrays,
+# invalidating all .o files that rely on gc_priv.h
+
+mark.o typd_mlc.o finalize.o ptr_chck.o: $(srcdir)/include/gc_mark.h $(srcdir)/include/private/gc_pmark.h
+
+specific.o linux_threads.o: $(srcdir)/include/private/specific.h
+
+solaris_threads.o solaris_pthreads.o: $(srcdir)/include/private/solaris_threads.h
+
+dbg_mlc.o gcj_mlc.o: $(srcdir)/include/private/dbg_mlc.h
+
+tests/test.o: tests $(srcdir)/tests/test.c
+       $(CC) $(CFLAGS) -c $(srcdir)/tests/test.c
+       mv test.o tests/test.o
+
+tests:
+       mkdir tests
+
+base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
+       echo > base_lib
+       rm -f dont_ar_1
+       ./if_mach SPARC SUNOS5 touch dont_ar_1
+       ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o
+       ./if_mach M68K AMIGA touch dont_ar_1
+       ./if_mach M68K AMIGA $(AR) -vrus gc.a $(OBJS) dyn_load.o
+       ./if_not_there dont_ar_1 $(AR) ru gc.a $(OBJS) dyn_load.o
+       ./if_not_there dont_ar_1 $(RANLIB) gc.a || cat /dev/null
+#      ignore ranlib failure; that usually means it doesn't exist, and isn't needed
+
+cords: $(CORD_OBJS) cord/cordtest $(UTILS)
+       rm -f dont_ar_3
+       ./if_mach SPARC SUNOS5 touch dont_ar_3
+       ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS)
+       ./if_mach M68K AMIGA touch dont_ar_3
+       ./if_mach M68K AMIGA $(AR) -vrus gc.a $(CORD_OBJS)
+       ./if_not_there dont_ar_3 $(AR) ru gc.a $(CORD_OBJS)
+       ./if_not_there dont_ar_3 $(RANLIB) gc.a || cat /dev/null
+
+gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/include/gc_cpp.h $(srcdir)/include/gc.h Makefile
+       $(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
+
+test_cpp: $(srcdir)/tests/test_cpp.cc $(srcdir)/include/gc_cpp.h gc_cpp.o $(srcdir)/include/gc.h \
+base_lib $(UTILS)
+       rm -f test_cpp
+       ./if_mach HP_PA HPUX $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a -ldld `./threadlibs`
+       ./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a `./threadlibs`
+
+c++-t: c++
+       ./test_cpp 1
+
+c++-nt: c++
+       @echo "Use ./test_cpp 1 to test the leak library"
+
+c++: gc_cpp.o $(srcdir)/include/gc_cpp.h test_cpp
+       rm -f dont_ar_4
+       ./if_mach SPARC SUNOS5 touch dont_ar_4
+       ./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o
+       ./if_mach M68K AMIGA touch dont_ar_4
+       ./if_mach M68K AMIGA $(AR) -vrus gc.a gc_cpp.o
+       ./if_not_there dont_ar_4 $(AR) ru gc.a gc_cpp.o
+       ./if_not_there dont_ar_4 $(RANLIB) gc.a || cat /dev/null
+       ./test_cpp 1
+       echo > c++
+
+dyn_load_sunos53.o: dyn_load.c
+       $(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
+
+# SunOS5 shared library version of the collector
+sunos5gc.so: $(OBJS) dyn_load_sunos53.o
+       $(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o -ldl
+       ln sunos5gc.so libgc.so
+
+# Alpha/OSF shared library version of the collector
+libalphagc.so: $(OBJS)
+       ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
+       ln libalphagc.so libgc.so
+
+# IRIX shared library version of the collector
+libirixgc.so: $(OBJS) dyn_load.o
+       ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
+       ln libirixgc.so libgc.so
+
+# Linux shared library version of the collector
+liblinuxgc.so: $(OBJS) dyn_load.o
+       gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o
+       ln liblinuxgc.so libgc.so
+
+# Alternative Linux rule.  This is preferable, but is likely to break the
+# Makefile for some non-linux platforms.
+# LIBOBJS= $(patsubst %.o, %.lo, $(OBJS))
+#
+#.SUFFIXES: .lo $(SUFFIXES)
+#
+#.c.lo:
+#      $(CC) $(CFLAGS) $(CPPFLAGS) -fPIC -c $< -o $@
+#
+# liblinuxgc.so: $(LIBOBJS) dyn_load.lo
+#      gcc -shared -Wl,-soname=libgc.so.0 -o libgc.so.0 $(LIBOBJS) dyn_load.lo
+#      touch liblinuxgc.so
+
+mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s $(srcdir)/mips_ultrix_mach_dep.s \
+            $(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_macosx_mach_dep.s $(UTILS)
+       rm -f mach_dep.o
+       ./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.s
+       ./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
+       ./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
+       ./if_mach RS6000 "" $(AS) -o mach_dep.o $(srcdir)/rs6000_mach_dep.s
+       ./if_mach POWERPC MACOSX $(AS) -o mach_dep.o $(srcdir)/powerpc_macosx_mach_dep.s
+#      ./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.s
+#      alpha_mach_dep.s assumes that pointers are not saved in fp registers.
+#      Gcc on a 21264 can spill pointers to fp registers.  Oops.
+       ./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.s
+       ./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
+       ./if_mach SPARC OPENBSD $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
+       ./if_mach SPARC NETBSD $(AS) -o mach_dep.o $(srcdir)/sparc_netbsd_mach_dep.s
+       ./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
+
+mark_rts.o: $(srcdir)/mark_rts.c $(UTILS)
+       rm -f mark_rts.o
+       -./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
+       ./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
+#      Work-around for DEC optimizer tail recursion elimination bug.
+#  The ALPHA-specific line should be removed if gcc is used.
+
+alloc.o: version.h
+
+cord:
+       mkdir cord
+
+cord/cordbscs.o: cord $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
+       $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
+       mv cordbscs.o cord/cordbscs.o
+#  not all compilers understand -o filename
+
+cord/cordxtra.o: cord $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
+       $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
+       mv cordxtra.o cord/cordxtra.o
+
+cord/cordprnt.o: cord $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
+       $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
+       mv cordprnt.o cord/cordprnt.o
+
+cord/cordtest: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS)
+       rm -f cord/cordtest
+       ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
+       ./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld `./threadlibs`
+       ./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
+       ./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
+
+cord/de: $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
+       rm -f cord/de
+       ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
+       ./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld `./threadlibs`
+       ./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
+       ./if_mach POWERPC MACOSX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a
+       ./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
+       ./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
+       ./if_mach IA64 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
+       ./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
+       ./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs`
+
+if_mach: $(srcdir)/if_mach.c $(srcdir)/include/private/gcconfig.h
+       $(HOSTCC) $(HOSTCFLAGS) -o if_mach $(srcdir)/if_mach.c
+
+threadlibs: $(srcdir)/threadlibs.c $(srcdir)/include/private/gcconfig.h Makefile
+       $(HOSTCC) $(HOSTCFLAGS) -o threadlibs $(srcdir)/threadlibs.c
+
+if_not_there: $(srcdir)/if_not_there.c
+       $(HOSTCC) $(HOSTCFLAGS) -o if_not_there $(srcdir)/if_not_there.c
+
+clean: 
+       rm -f gc.a *.o *.exe tests/*.o gctest gctest_dyn_link test_cpp \
+             setjmp_test  mon.out gmon.out a.out core if_not_there if_mach \
+             threadlibs $(CORD_OBJS) cord/cordtest cord/de
+       -rm -f *~
+
+gctest: tests/test.o gc.a $(UTILS)
+       rm -f gctest
+       ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest  tests/test.o gc.a -lucb
+       ./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o gctest  tests/test.o gc.a -ldld `./threadlibs`
+       ./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o gctest  tests/test.o gc.a `./threadlibs`
+       ./if_not_there gctest $(CC) $(CFLAGS) -o gctest tests/test.o gc.a `./threadlibs`
+
+# If an optimized setjmp_test generates a segmentation fault,
+# odds are your compiler is broken.  Gctest may still work.
+# Try compiling setjmp_t.c unoptimized.
+setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/include/gc.h $(UTILS)
+       $(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c
+
+test:  KandRtest cord/cordtest
+       cord/cordtest
+
+# Those tests that work even with a K&R C compiler:
+KandRtest: setjmp_test gctest
+       ./setjmp_test
+       ./gctest
+
+add_gc_prefix: $(srcdir)/add_gc_prefix.c $(srcdir)/version.h
+       $(CC) -o add_gc_prefix $(srcdir)/add_gc_prefix.c
+
+gcname: $(srcdir)/gcname.c $(srcdir)/version.h
+       $(CC) -o gcname $(srcdir)/gcname.c
+
+gc.tar: $(SRCS) $(DOC_FILES) $(OTHER_FILES) add_gc_prefix gcname
+       cp Makefile Makefile.old
+       cp Makefile.direct Makefile
+       rm -f `./gcname`
+       ln -s . `./gcname`
+       ./add_gc_prefix $(SRCS) $(DOC_FILES) $(OTHER_FILES) > /tmp/gc.tar-files
+       tar cvfh gc.tar `cat /tmp/gc.tar-files`
+       cp gc.tar `./gcname`.tar
+       gzip `./gcname`.tar
+       rm `./gcname`
+
+pc_gc.tar: $(SRCS) $(OTHER_FILES)
+       tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES)
+
+floppy: pc_gc.tar
+       -mmd a:/cord
+       -mmd a:/cord/private
+       -mmd a:/include
+       -mmd a:/include/private
+       mkdir /tmp/pc_gc
+       cat pc_gc.tar | (cd /tmp/pc_gc; tar xvf -)
+       -mcopy -tmn /tmp/pc_gc/* a:
+       -mcopy -tmn /tmp/pc_gc/cord/* a:/cord
+       -mcopy -mn /tmp/pc_gc/cord/de_win.ICO a:/cord
+       -mcopy -tmn /tmp/pc_gc/cord/private/* a:/cord/private
+       -mcopy -tmn /tmp/pc_gc/include/* a:/include
+       -mcopy -tmn /tmp/pc_gc/include/private/* a:/include/private
+       rm -r /tmp/pc_gc
+
+gc.tar.Z: gc.tar
+       compress gc.tar
+
+gc.tar.gz: gc.tar
+       gzip gc.tar
+
+lint: $(CSRCS) tests/test.c
+       lint -DLINT $(CSRCS) tests/test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall|change in ANSI|improper alignment"
+
+# BTL: added to test shared library version of collector.
+# Currently works only under SunOS5.  Requires GC_INIT call from statically
+# loaded client code.
+ABSDIR = `pwd`
+gctest_dyn_link: tests/test.o libgc.so
+       $(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link tests/test.o -lgc -ldl -lthread
+
+gctest_irix_dyn_link: tests/test.o libirixgc.so
+       $(CC) -L$(ABSDIR) -o gctest_irix_dyn_link tests/test.o -lirixgc
+
+# The following appear to be dead, especially since libgc_globals.h
+# is apparently lost.
+test_dll.o: tests/test.c libgc_globals.h
+       $(CC) $(CFLAGS) -DGC_USE_DLL -c tests/test.c -o test_dll.o
+
+test_dll: test_dll.o libgc_dll.a libgc.dll
+       $(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll
+
+SYM_PREFIX-libgc=GC
+
+# Uncomment the following line to build a GNU win32 DLL
+# include Makefile.DLLs
+
+reserved_namespace: $(SRCS)
+       for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
+               sed s/GC_/_GC_/g < $$file > tmp; \
+               cp tmp $$file; \
+               done
+
+user_namespace: $(SRCS)
+       for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
+               sed s/_GC_/GC_/g < $$file > tmp; \
+               cp tmp $$file; \
+               done
diff --git a/boehm-gc/config.guess b/boehm-gc/config.guess
new file mode 100755 (executable)
index 0000000..e1b5871
--- /dev/null
@@ -0,0 +1,1121 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
+#   Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner@cygnus.com>.
+# The master version of this file is at the FSF in /home/gd/gnu/lib.
+# Please send patches to <autoconf-patches@gnu.org>.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit system type (host/target name).
+#
+# Only a few systems have been added to this list; please add others
+# (but try to keep the structure clean).
+#
+
+# Use $HOST_CC if defined. $CC may point to a cross-compiler
+if test x"$CC_FOR_BUILD" = x; then
+  if test x"$HOST_CC" != x; then
+    CC_FOR_BUILD="$HOST_CC"
+  else
+    if test x"$CC" != x; then
+      CC_FOR_BUILD="$CC"
+    else
+      CC_FOR_BUILD=cc
+    fi
+  fi
+fi
+
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 8/24/94.)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+       PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+dummy=dummy-$$
+trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    alpha:OSF1:*:*)
+       if test $UNAME_RELEASE = "V4.0"; then
+               UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+       fi
+       # A Vn.n version is a released version.
+       # A Tn.n version is a released field test version.
+       # A Xn.n version is an unreleased experimental baselevel.
+       # 1.2 uses "1.2" for uname -r.
+       cat <<EOF >$dummy.s
+       .globl main
+       .ent main
+main:
+       .frame \$30,0,\$26,0
+       .prologue 0
+       .long 0x47e03d80 # implver $0
+       lda \$2,259
+       .long 0x47e20c21 # amask $2,$1
+       srl \$1,8,\$2
+       sll \$2,2,\$2
+       sll \$0,3,\$0
+       addl \$1,\$0,\$0
+       addl \$2,\$0,\$0
+       ret \$31,(\$26),1
+       .end main
+EOF
+       $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+       if test "$?" = 0 ; then
+               ./$dummy
+               case "$?" in
+                       7)
+                               UNAME_MACHINE="alpha"
+                               ;;
+                       15)
+                               UNAME_MACHINE="alphaev5"
+                               ;;
+                       14)
+                               UNAME_MACHINE="alphaev56"
+                               ;;
+                       10)
+                               UNAME_MACHINE="alphapca56"
+                               ;;
+                       16)
+                               UNAME_MACHINE="alphaev6"
+                               ;;
+               esac
+       fi
+       rm -f $dummy.s $dummy
+       echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+       exit 0 ;;
+    Alpha\ *:Windows_NT*:*)
+       # How do we know it's Interix rather than the generic POSIX subsystem?
+       # Should we change UNAME_MACHINE based on the output of uname instead
+       # of the specific Alpha model?
+       echo alpha-pc-interix
+       exit 0 ;;
+    21064:Windows_NT:50:3)
+       echo alpha-dec-winnt3.5
+       exit 0 ;;
+    Amiga*:UNIX_System_V:4.0:*)
+       echo m68k-cbm-sysv4
+       exit 0;;
+    amiga:NetBSD:*:*)
+      echo m68k-cbm-netbsd${UNAME_RELEASE}
+      exit 0 ;;
+    amiga:OpenBSD:*:*)
+       echo m68k-unknown-openbsd${UNAME_RELEASE}
+       exit 0 ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+       echo ${UNAME_MACHINE}-unknown-amigaos
+       exit 0 ;;
+    arc64:OpenBSD:*:*)
+       echo mips64el-unknown-openbsd${UNAME_RELEASE}
+       exit 0 ;;
+    arc:OpenBSD:*:*)
+       echo mipsel-unknown-openbsd${UNAME_RELEASE}
+       exit 0 ;;
+    hkmips:OpenBSD:*:*)
+       echo mips-unknown-openbsd${UNAME_RELEASE}
+       exit 0 ;;
+    pmax:OpenBSD:*:*)
+       echo mipsel-unknown-openbsd${UNAME_RELEASE}
+       exit 0 ;;
+    sgi:OpenBSD:*:*)
+       echo mips-unknown-openbsd${UNAME_RELEASE}
+       exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+       echo mipsel-unknown-openbsd${UNAME_RELEASE}
+       exit 0 ;;
+    *:OS/390:*:*)
+       echo i370-ibm-openedition
+       exit 0 ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+       echo arm-acorn-riscix${UNAME_RELEASE}
+       exit 0;;
+    arm32:NetBSD:*:*)
+       echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+       exit 0 ;;
+    SR2?01:HI-UX/MPP:*:*)
+       echo hppa1.1-hitachi-hiuxmpp
+       exit 0;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+       # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+       if test "`(/bin/universe) 2>/dev/null`" = att ; then
+               echo pyramid-pyramid-sysv3
+       else
+               echo pyramid-pyramid-bsd
+       fi
+       exit 0 ;;
+    NILE*:*:*:dcosx)
+       echo pyramid-pyramid-svr4
+       exit 0 ;;
+    sun4H:SunOS:5.*:*)
+       echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+       exit 0 ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+       echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+       exit 0 ;;
+    i86pc:SunOS:5.*:*)
+       echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+       exit 0 ;;
+    sun4*:SunOS:6*:*)
+       # According to config.sub, this is the proper way to canonicalize
+       # SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+       # it's likely to be more like Solaris than SunOS4.
+       echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+       exit 0 ;;
+    sun4*:SunOS:*:*)
+       case "`/usr/bin/arch -k`" in
+           Series*|S4*)
+               UNAME_RELEASE=`uname -v`
+               ;;
+       esac
+       # Japanese Language versions have a version number like `4.1.3-JL'.
+       echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+       exit 0 ;;
+    sun3*:SunOS:*:*)
+       echo m68k-sun-sunos${UNAME_RELEASE}
+       exit 0 ;;
+    sun*:*:4.2BSD:*)
+       UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+       test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+       case "`/bin/arch`" in
+           sun3)
+               echo m68k-sun-sunos${UNAME_RELEASE}
+               ;;
+           sun4)
+               echo sparc-sun-sunos${UNAME_RELEASE}
+               ;;
+       esac
+       exit 0 ;;
+    aushp:SunOS:*:*)
+       echo sparc-auspex-sunos${UNAME_RELEASE}
+       exit 0 ;;
+    atari*:NetBSD:*:*)
+       echo m68k-atari-netbsd${UNAME_RELEASE}
+       exit 0 ;;
+    atari*:OpenBSD:*:*)
+       echo m68k-unknown-openbsd${UNAME_RELEASE}
+       exit 0 ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor 
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+       exit 0 ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+       echo m68k-atari-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+       exit 0 ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit 0 ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit 0 ;;
+    sun3*:NetBSD:*:*)
+       echo m68k-sun-netbsd${UNAME_RELEASE}
+       exit 0 ;;
+    sun3*:OpenBSD:*:*)
+       echo m68k-unknown-openbsd${UNAME_RELEASE}
+       exit 0 ;;
+    mac68k:NetBSD:*:*)
+       echo m68k-apple-netbsd${UNAME_RELEASE}
+       exit 0 ;;
+    mac68k:OpenBSD:*:*)
+       echo m68k-unknown-openbsd${UNAME_RELEASE}
+       exit 0 ;;
+    mvme68k:OpenBSD:*:*)
+       echo m68k-unknown-openbsd${UNAME_RELEASE}
+       exit 0 ;;
+    mvme88k:OpenBSD:*:*)
+       echo m88k-unknown-openbsd${UNAME_RELEASE}
+       exit 0 ;;
+    powerpc:machten:*:*)
+       echo powerpc-apple-machten${UNAME_RELEASE}
+       exit 0 ;;
+    macppc:NetBSD:*:*)
+        echo powerpc-apple-netbsd${UNAME_RELEASE}
+        exit 0 ;;
+    RISC*:Mach:*:*)
+       echo mips-dec-mach_bsd4.3
+       exit 0 ;;
+    RISC*:ULTRIX:*:*)
+       echo mips-dec-ultrix${UNAME_RELEASE}
+       exit 0 ;;
+    VAX*:ULTRIX*:*:*)
+       echo vax-dec-ultrix${UNAME_RELEASE}
+       exit 0 ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+       echo clipper-intergraph-clix${UNAME_RELEASE}
+       exit 0 ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+       sed 's/^        //' << EOF >$dummy.c
+#ifdef __cplusplus
+       int main (int argc, char *argv[]) {
+#else
+       int main (argc, argv) int argc; char *argv[]; {
+#endif
+       #if defined (host_mips) && defined (MIPSEB)
+       #if defined (SYSTYPE_SYSV)
+         printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+       #endif
+       #if defined (SYSTYPE_SVR4)
+         printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+       #endif
+       #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+         printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+       #endif
+       #endif
+         exit (-1);
+       }
+EOF
+       $CC_FOR_BUILD $dummy.c -o $dummy \
+         && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+         && rm $dummy.c $dummy && exit 0
+       rm -f $dummy.c $dummy
+       echo mips-mips-riscos${UNAME_RELEASE}
+       exit 0 ;;
+    Night_Hawk:Power_UNIX:*:*)
+       echo powerpc-harris-powerunix
+       exit 0 ;;
+    m88k:CX/UX:7*:*)
+       echo m88k-harris-cxux7
+       exit 0 ;;
+    m88k:*:4*:R4*)
+       echo m88k-motorola-sysv4
+       exit 0 ;;
+    m88k:*:3*:R3*)
+       echo m88k-motorola-sysv3
+       exit 0 ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+       if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110]
+       then
+           if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+              [ ${TARGET_BINARY_INTERFACE}x = x ]
+           then
+               echo m88k-dg-dgux${UNAME_RELEASE}
+           else
+               echo m88k-dg-dguxbcs${UNAME_RELEASE}
+           fi
+       else
+           echo i586-dg-dgux${UNAME_RELEASE}
+       fi
+       exit 0 ;;
+    M88*:DolphinOS:*:*)        # DolphinOS (SVR3)
+       echo m88k-dolphin-sysv3
+       exit 0 ;;
+    M88*:*:R3*:*)
+       # Delta 88k system running SVR3
+       echo m88k-motorola-sysv3
+       exit 0 ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+       echo m88k-tektronix-sysv3
+       exit 0 ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+       echo m68k-tektronix-bsd
+       exit 0 ;;
+    *:IRIX*:*:*)
+       echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+       exit 0 ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+       echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
+       exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+    i?86:AIX:*:*)
+       echo i386-ibm-aix
+       exit 0 ;;
+    *:AIX:2:3)
+       if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+               sed 's/^                //' << EOF >$dummy.c
+               #include <sys/systemcfg.h>
+
+               main()
+                       {
+                       if (!__power_pc())
+                               exit(1);
+                       puts("powerpc-ibm-aix3.2.5");
+                       exit(0);
+                       }
+EOF
+               $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+               rm -f $dummy.c $dummy
+               echo rs6000-ibm-aix3.2.5
+       elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+               echo rs6000-ibm-aix3.2.4
+       else
+               echo rs6000-ibm-aix3.2
+       fi
+       exit 0 ;;
+    *:AIX:*:4)
+       IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+       if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
+               IBM_ARCH=rs6000
+       else
+               IBM_ARCH=powerpc
+       fi
+       if [ -x /usr/bin/oslevel ] ; then
+               IBM_REV=`/usr/bin/oslevel`
+       else
+               IBM_REV=4.${UNAME_RELEASE}
+       fi
+       echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+       exit 0 ;;
+    *:AIX:*:*)
+       echo rs6000-ibm-aix
+       exit 0 ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+       echo romp-ibm-bsd4.4
+       exit 0 ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC NetBSD and
+       echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+       exit 0 ;;                           # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+       echo rs6000-bull-bosx
+       exit 0 ;;
+    DPX/2?00:B.O.S.:*:*)
+       echo m68k-bull-sysv3
+       exit 0 ;;
+    9000/[34]??:4.3bsd:1.*:*)
+       echo m68k-hp-bsd
+       exit 0 ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+       echo m68k-hp-bsd4.4
+       exit 0 ;;
+    9000/[34678]??:HP-UX:*:*)
+       case "${UNAME_MACHINE}" in
+           9000/31? )            HP_ARCH=m68000 ;;
+           9000/[34]?? )         HP_ARCH=m68k ;;
+           9000/[678][0-9][0-9])
+              sed 's/^              //' << EOF >$dummy.c
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+               {
+               case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+               case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+               case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+                   switch (bits)
+                       {
+                       case 64: puts ("hppa2.0w"); break;
+                       case 32: puts ("hppa2.0n"); break;
+                       default: puts ("hppa2.0"); break;
+                       } break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+                   puts ("hppa2.0"); break;
+              #endif
+               default: puts ("hppa1.0"); break;
+               }
+                  exit (0);
+              }
+EOF
+       (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+       rm -f $dummy.c $dummy
+       esac
+       HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+       echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+       exit 0 ;;
+    3050*:HI-UX:*:*)
+       sed 's/^        //' << EOF >$dummy.c
+       #include <unistd.h>
+       int
+       main ()
+       {
+         long cpu = sysconf (_SC_CPU_VERSION);
+         /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+            true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+            results, however.  */
+         if (CPU_IS_PA_RISC (cpu))
+           {
+             switch (cpu)
+               {
+                 case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+                 case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+                 case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+                 default: puts ("hppa-hitachi-hiuxwe2"); break;
+               }
+           }
+         else if (CPU_IS_HP_MC68K (cpu))
+           puts ("m68k-hitachi-hiuxwe2");
+         else puts ("unknown-hitachi-hiuxwe2");
+         exit (0);
+       }
+EOF
+       $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+       rm -f $dummy.c $dummy
+       echo unknown-hitachi-hiuxwe2
+       exit 0 ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+       echo hppa1.1-hp-bsd
+       exit 0 ;;
+    9000/8??:4.3bsd:*:*)
+       echo hppa1.0-hp-bsd
+       exit 0 ;;
+    *9??*:MPE/iX:*:*)
+       echo hppa1.0-hp-mpeix
+       exit 0 ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+       echo hppa1.1-hp-osf
+       exit 0 ;;
+    hp8??:OSF1:*:*)
+       echo hppa1.0-hp-osf
+       exit 0 ;;
+    i?86:OSF1:*:*)
+       if [ -x /usr/sbin/sysversion ] ; then
+           echo ${UNAME_MACHINE}-unknown-osf1mk
+       else
+           echo ${UNAME_MACHINE}-unknown-osf1
+       fi
+       exit 0 ;;
+    parisc*:Lites*:*:*)
+       echo hppa1.1-hp-lites
+       exit 0 ;;
+    hppa*:OpenBSD:*:*)
+       echo hppa-unknown-openbsd
+       exit 0 ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+       echo c1-convex-bsd
+        exit 0 ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+       if getsysinfo -f scalar_acc
+       then echo c32-convex-bsd
+       else echo c2-convex-bsd
+       fi
+        exit 0 ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+       echo c34-convex-bsd
+        exit 0 ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+       echo c38-convex-bsd
+        exit 0 ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+       echo c4-convex-bsd
+        exit 0 ;;
+    CRAY*X-MP:*:*:*)
+       echo xmp-cray-unicos
+        exit 0 ;;
+    CRAY*Y-MP:*:*:*)
+       echo ymp-cray-unicos${UNAME_RELEASE}
+       exit 0 ;;
+    CRAY*[A-Z]90:*:*:*)
+       echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+       | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+             -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+       exit 0 ;;
+    CRAY*TS:*:*:*)
+       echo t90-cray-unicos${UNAME_RELEASE}
+       exit 0 ;;
+    CRAY*T3E:*:*:*)
+       echo alpha-cray-unicosmk${UNAME_RELEASE}
+       exit 0 ;;
+    CRAY-2:*:*:*)
+       echo cray2-cray-unicos
+        exit 0 ;;
+    F300:UNIX_System_V:*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit 0 ;;
+    F301:UNIX_System_V:*:*)
+       echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
+       exit 0 ;;
+    hp3[0-9][05]:NetBSD:*:*)
+       echo m68k-hp-netbsd${UNAME_RELEASE}
+       exit 0 ;;
+    hp300:OpenBSD:*:*)
+       echo m68k-unknown-openbsd${UNAME_RELEASE}
+       exit 0 ;;
+    i?86:BSD/386:*:* | i?86:BSD/OS:*:*)
+       echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+       exit 0 ;;
+    sparc*:BSD/OS:*:*)
+       echo sparc-unknown-bsdi${UNAME_RELEASE}
+       exit 0 ;;
+    *:BSD/OS:*:*)
+       echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+       exit 0 ;;
+    *:FreeBSD:*:*)
+       if test -x /usr/bin/objformat; then
+           if test "elf" = "`/usr/bin/objformat`"; then
+               echo ${UNAME_MACHINE}-unknown-freebsdelf`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'`
+               exit 0
+           fi
+       fi
+       echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+       exit 0 ;;
+    *:NetBSD:*:*)
+       echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'`
+       exit 0 ;;
+    *:OpenBSD:*:*)
+       echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+       exit 0 ;;
+    i*:CYGWIN*:*)
+       echo ${UNAME_MACHINE}-pc-cygwin
+       exit 0 ;;
+    i*:MINGW*:*)
+       echo ${UNAME_MACHINE}-pc-mingw32
+       exit 0 ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+       # How do we know it's Interix rather than the generic POSIX subsystem?
+       # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+       # UNAME_MACHINE based on the output of uname instead of i386?
+       echo i386-pc-interix
+       exit 0 ;;
+    i*:UWIN*:*)
+       echo ${UNAME_MACHINE}-pc-uwin
+       exit 0 ;;
+    p*:CYGWIN*:*)
+       echo powerpcle-unknown-cygwin
+       exit 0 ;;
+    prep*:SunOS:5.*:*)
+       echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+       exit 0 ;;
+    *:GNU:*:*)
+       echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+       exit 0 ;;
+    *:Linux:*:*)
+
+       # The BFD linker knows what the default object file format is, so
+       # first see if it will tell us. cd to the root directory to prevent
+       # problems with other programs or directories called `ld' in the path.
+       ld_help_string=`cd /; ld --help 2>&1`
+       ld_supported_emulations=`echo $ld_help_string \
+                        | sed -ne '/supported emulations:/!d
+                                   s/[         ][      ]*/ /g
+                                   s/.*supported emulations: *//
+                                   s/ .*//
+                                   p'`
+        case "$ld_supported_emulations" in
+         *ia64)
+               echo "${UNAME_MACHINE}-unknown-linux"
+               exit 0
+               ;;
+         i?86linux)
+               echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+               exit 0
+               ;;
+         i?86coff)
+               echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+               exit 0
+               ;;
+         sparclinux)
+               echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+               exit 0
+               ;;
+         armlinux)
+               echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+               exit 0
+               ;;
+         elf32arm*)
+               echo "${UNAME_MACHINE}-unknown-linux-gnu"
+               exit 0
+               ;;
+         armelf_linux*)
+               echo "${UNAME_MACHINE}-unknown-linux-gnu"
+               exit 0
+               ;;
+         m68klinux)
+               echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+               exit 0
+               ;;
+         elf32ppc)
+               # Determine Lib Version
+               cat >$dummy.c <<EOF
+#include <features.h>
+#if defined(__GLIBC__)
+extern char __libc_version[];
+extern char __libc_release[];
+#endif
+main(argc, argv)
+     int argc;
+     char *argv[];
+{
+#if defined(__GLIBC__)
+  printf("%s %s\n", __libc_version, __libc_release);
+#else
+  printf("unkown\n");
+#endif
+  return 0;
+}
+EOF
+               LIBC=""
+               $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
+               if test "$?" = 0 ; then
+                       ./$dummy | grep 1\.99 > /dev/null
+                       if test "$?" = 0 ; then
+                               LIBC="libc1"
+                       fi
+               fi      
+               rm -f $dummy.c $dummy
+               echo powerpc-unknown-linux-gnu${LIBC}
+               exit 0
+               ;;
+       esac
+
+       if test "${UNAME_MACHINE}" = "alpha" ; then
+               sed 's/^        //'  <<EOF >$dummy.s
+               .globl main
+               .ent main
+       main:
+               .frame \$30,0,\$26,0
+               .prologue 0
+               .long 0x47e03d80 # implver $0
+               lda \$2,259
+               .long 0x47e20c21 # amask $2,$1
+               srl \$1,8,\$2
+               sll \$2,2,\$2
+               sll \$0,3,\$0
+               addl \$1,\$0,\$0
+               addl \$2,\$0,\$0
+               ret \$31,(\$26),1
+               .end main
+EOF
+               LIBC=""
+               $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+               if test "$?" = 0 ; then
+                       ./$dummy
+                       case "$?" in
+                       7)
+                               UNAME_MACHINE="alpha"
+                               ;;
+                       15)
+                               UNAME_MACHINE="alphaev5"
+                               ;;
+                       14)
+                               UNAME_MACHINE="alphaev56"
+                               ;;
+                       10)
+                               UNAME_MACHINE="alphapca56"
+                               ;;
+                       16)
+                               UNAME_MACHINE="alphaev6"
+                               ;;
+                       esac
+
+                       objdump --private-headers $dummy | \
+                         grep ld.so.1 > /dev/null
+                       if test "$?" = 0 ; then
+                               LIBC="libc1"
+                       fi
+               fi
+               rm -f $dummy.s $dummy
+               echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
+       elif test "${UNAME_MACHINE}" = "mips" ; then
+         cat >$dummy.c <<EOF
+#ifdef __cplusplus
+       int main (int argc, char *argv[]) {
+#else
+       int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __MIPSEB__
+  printf ("%s-unknown-linux-gnu\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+  printf ("%sel-unknown-linux-gnu\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+         $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+         rm -f $dummy.c $dummy
+       else
+         # Either a pre-BFD a.out linker (linux-gnuoldld)
+         # or one that does not give us useful --help.
+         # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+         # If ld does not provide *any* "supported emulations:"
+         # that means it is gnuoldld.
+         echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
+         test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+
+         case "${UNAME_MACHINE}" in
+         i?86)
+           VENDOR=pc;
+           ;;
+         *)
+           VENDOR=unknown;
+           ;;
+         esac
+         # Determine whether the default compiler is a.out or elf
+         cat >$dummy.c <<EOF
+#include <features.h>
+#ifdef __cplusplus
+       int main (int argc, char *argv[]) {
+#else
+       int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __ELF__
+# ifdef __GLIBC__
+#  if __GLIBC__ >= 2
+    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+#  else
+    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+#  endif
+# else
+   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+#else
+  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+         $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+         rm -f $dummy.c $dummy
+       fi ;;
+# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
+# are messed up and put the nodename in both sysname and nodename.
+    i?86:DYNIX/ptx:4*:*)
+       echo i386-sequent-sysv4
+       exit 0 ;;
+    i?86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+       # I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+       echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+       exit 0 ;;
+    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+       UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+       if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+               echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+       else
+               echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+       fi
+       exit 0 ;;
+    i?86:*:5:7*)
+        # Fixed at (any) Pentium or better
+        UNAME_MACHINE=i586
+        if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
+           echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
+       else
+           echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+       fi
+       exit 0 ;;
+    i?86:*:3.2:*)
+       if test -f /usr/options/cb.name; then
+               UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+               echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+       elif /bin/uname -X 2>/dev/null >/dev/null ; then
+               UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+               (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+               (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+                       && UNAME_MACHINE=i586
+               (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+                       && UNAME_MACHINE=i686
+               (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+                       && UNAME_MACHINE=i686
+               echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+       else
+               echo ${UNAME_MACHINE}-pc-sysv32
+       fi
+       exit 0 ;;
+    pc:*:*:*)
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+       echo i386-pc-msdosdjgpp
+        exit 0 ;;
+    Intel:Mach:3*:*)
+       echo i386-pc-mach3
+       exit 0 ;;
+    paragon:*:*:*)
+       echo i860-intel-osf1
+       exit 0 ;;
+    i860:*:4.*:*) # i860-SVR4
+       if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+         echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+       else # Add other i860-SVR4 vendors below as they are discovered.
+         echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+       fi
+       exit 0 ;;
+    mini*:CTIX:SYS*5:*)
+       # "miniframe"
+       echo m68010-convergent-sysv
+       exit 0 ;;
+    M68*:*:R3V[567]*:*)
+       test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+       OS_REL=''
+       test -r /etc/.relid \
+       && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+       /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+         && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+       /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+         && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && echo i486-ncr-sysv4 && exit 0 ;;
+    m68*:LynxOS:2.*:*)
+       echo m68k-unknown-lynxos${UNAME_RELEASE}
+       exit 0 ;;
+    mc68030:UNIX_System_V:4.*:*)
+       echo m68k-atari-sysv4
+       exit 0 ;;
+    i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
+       echo i386-unknown-lynxos${UNAME_RELEASE}
+       exit 0 ;;
+    TSUNAMI:LynxOS:2.*:*)
+       echo sparc-unknown-lynxos${UNAME_RELEASE}
+       exit 0 ;;
+    rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
+       echo rs6000-unknown-lynxos${UNAME_RELEASE}
+       exit 0 ;;
+    SM[BE]S:UNIX_SV:*:*)
+       echo mips-dde-sysv${UNAME_RELEASE}
+       exit 0 ;;
+    RM*:ReliantUNIX-*:*:*)
+       echo mips-sni-sysv4
+       exit 0 ;;
+    RM*:SINIX-*:*:*)
+       echo mips-sni-sysv4
+       exit 0 ;;
+    *:SINIX-*:*:*)
+       if uname -p 2>/dev/null >/dev/null ; then
+               UNAME_MACHINE=`(uname -p) 2>/dev/null`
+               echo ${UNAME_MACHINE}-sni-sysv4
+       else
+               echo ns32k-sni-sysv
+       fi
+       exit 0 ;;
+    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                           # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit 0 ;;
+    *:UNIX_System_V:4*:FTX*)
+       # From Gerald Hewes <hewes@openmarket.com>.
+       # How about differentiating between stratus architectures? -djm
+       echo hppa1.1-stratus-sysv4
+       exit 0 ;;
+    *:*:*:FTX*)
+       # From seanf@swdc.stratus.com.
+       echo i860-stratus-sysv4
+       exit 0 ;;
+    mc68*:A/UX:*:*)
+       echo m68k-apple-aux${UNAME_RELEASE}
+       exit 0 ;;
+    news*:NEWS-OS:*:6*)
+       echo mips-sony-newsos6
+       exit 0 ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+       if [ -d /usr/nec ]; then
+               echo mips-nec-sysv${UNAME_RELEASE}
+       else
+               echo mips-unknown-sysv${UNAME_RELEASE}
+       fi
+        exit 0 ;;
+    BeBox:BeOS:*:*)    # BeOS running on hardware made by Be, PPC only.
+       echo powerpc-be-beos
+       exit 0 ;;
+    BeMac:BeOS:*:*)    # BeOS running on Mac or Mac clone, PPC only.
+       echo powerpc-apple-beos
+       exit 0 ;;
+    BePC:BeOS:*:*)     # BeOS running on Intel PC compatible.
+       echo i586-pc-beos
+       exit 0 ;;
+    SX-4:SUPER-UX:*:*)
+       echo sx4-nec-superux${UNAME_RELEASE}
+       exit 0 ;;
+    SX-5:SUPER-UX:*:*)
+       echo sx5-nec-superux${UNAME_RELEASE}
+       exit 0 ;;
+    Power*:Rhapsody:*:*)
+       echo powerpc-apple-rhapsody${UNAME_RELEASE}
+       exit 0 ;;
+    *:Rhapsody:*:*)
+       echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+       exit 0 ;;
+    *:QNX:*:4*)
+       echo i386-qnx-qnx${UNAME_VERSION}
+       exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+         ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+       printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+       printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+  printf ("vax-dec-bsd\n"); exit (0);
+#else
+  printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
+rm -f $dummy.c $dummy
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+       echo c1-convex-bsd
+       exit 0 ;;
+    c2*)
+       if getsysinfo -f scalar_acc
+       then echo c32-convex-bsd
+       else echo c2-convex-bsd
+       fi
+       exit 0 ;;
+    c34*)
+       echo c34-convex-bsd
+       exit 0 ;;
+    c38*)
+       echo c38-convex-bsd
+       exit 0 ;;
+    c4*)
+       echo c4-convex-bsd
+       exit 0 ;;
+    esac
+fi
+
+#echo '(Unable to guess system type)' 1>&2
+
+exit 1
diff --git a/boehm-gc/config.sub b/boehm-gc/config.sub
new file mode 100755 (executable)
index 0000000..28426bb
--- /dev/null
@@ -0,0 +1,1232 @@
+#! /bin/sh
+# Configuration validation subroutine script, version 1.1.
+#   Copyright (C) 1991, 92-97, 1998, 1999 Free Software Foundation, Inc.
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#      CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#      CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+if [ x$1 = x ]
+then
+       echo Configuration name missing. 1>&2
+       echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
+       echo "or     $0 ALIAS" 1>&2
+       echo where ALIAS is a recognized configuration type. 1>&2
+       exit 1
+fi
+
+# First pass through any local machine types.
+case $1 in
+       *local*)
+               echo $1
+               exit 0
+               ;;
+       *)
+       ;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  linux-gnu*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+       -sun*os*)
+               # Prevent following clause from handling this invalid input.
+               ;;
+       -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+       -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+       -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+       -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+       -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+       -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+       -apple)
+               os=
+               basic_machine=$1
+               ;;
+       -sim | -cisco | -oki | -wec | -winbond)
+               os=
+               basic_machine=$1
+               ;;
+       -scout)
+               ;;
+       -wrs)
+               os=-vxworks
+               basic_machine=$1
+               ;;
+       -hiux*)
+               os=-hiuxwe2
+               ;;
+       -sco5)
+               os=-sco3.2v5
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -sco4)
+               os=-sco3.2v4
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -sco3.2.[4-9]*)
+               os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -sco3.2v[4-9]*)
+               # Don't forget version if it is 3.2v4 or newer.
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -sco*)
+               os=-sco3.2v2
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -udk*)
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -isc)
+               os=-isc2.2
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -clix*)
+               basic_machine=clipper-intergraph
+               ;;
+       -isc*)
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+               ;;
+       -lynx*)
+               os=-lynxos
+               ;;
+       -ptx*)
+               basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+               ;;
+       -windowsnt*)
+               os=`echo $os | sed -e 's/windowsnt/winnt/'`
+               ;;
+       -psos*)
+               os=-psos
+               ;;
+       -mint | -mint[0-9]*)
+               basic_machine=m68k-atari
+               os=-mint
+               ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+       # Recognize the basic CPU types without company name.
+       # Some are omitted here because they have special meanings below.
+       tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
+               | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
+               | 580 | i960 | h8300 \
+               | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
+               | alpha | alphaev[4-7] | alphaev56 | alphapca5[67] \
+               | we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
+               | 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
+               | mips64orion | mips64orionel | mipstx39 | mipstx39el \
+               | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
+               | mips64vr5000 | miprs64vr5000el | mcore \
+               | sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
+               | thumb | d10v | fr30)
+               basic_machine=$basic_machine-unknown
+               ;;
+       m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
+               ;;
+
+       # We use `pc' rather than `unknown'
+       # because (1) that's what they normally are, and
+       # (2) the word "unknown" tends to confuse beginning users.
+       i[34567]86)
+         basic_machine=$basic_machine-pc
+         ;;
+       # Object if more than one company name word.
+       *-*-*)
+               echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+               exit 1
+               ;;
+       # Recognize the basic CPU types with company name.
+       # FIXME: clean up the formatting here.
+       vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
+             | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
+             | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+             | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
+             | xmp-* | ymp-* \
+             | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* | hppa2.0n-* \
+             | alpha-* | alphaev[4-7]-* | alphaev56-* | alphapca5[67]-* \
+             | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+             | clipper-* | orion-* \
+             | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
+             | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
+             | mips64el-* | mips64orion-* | mips64orionel-* \
+             | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
+             | mipstx39-* | mipstx39el-* | mcore-* \
+             | f301-* | armv*-* | t3e-* \
+             | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
+             | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* )
+               ;;
+       # Recognize the various machine names and aliases which stand
+       # for a CPU type and a company and sometimes even an OS.
+       386bsd)
+               basic_machine=i386-unknown
+               os=-bsd
+               ;;
+       3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+               basic_machine=m68000-att
+               ;;
+       3b*)
+               basic_machine=we32k-att
+               ;;
+       a29khif)
+               basic_machine=a29k-amd
+               os=-udi
+               ;;
+       adobe68k)
+               basic_machine=m68010-adobe
+               os=-scout
+               ;;
+       alliant | fx80)
+               basic_machine=fx80-alliant
+               ;;
+       altos | altos3068)
+               basic_machine=m68k-altos
+               ;;
+       am29k)
+               basic_machine=a29k-none
+               os=-bsd
+               ;;
+       amdahl)
+               basic_machine=580-amdahl
+               os=-sysv
+               ;;
+       amiga | amiga-*)
+               basic_machine=m68k-cbm
+               ;;
+       amigaos | amigados)
+               basic_machine=m68k-cbm
+               os=-amigaos
+               ;;
+       amigaunix | amix)
+               basic_machine=m68k-cbm
+               os=-sysv4
+               ;;
+       apollo68)
+               basic_machine=m68k-apollo
+               os=-sysv
+               ;;
+       apollo68bsd)
+               basic_machine=m68k-apollo
+               os=-bsd
+               ;;
+       aux)
+               basic_machine=m68k-apple
+               os=-aux
+               ;;
+       balance)
+               basic_machine=ns32k-sequent
+               os=-dynix
+               ;;
+       convex-c1)
+               basic_machine=c1-convex
+               os=-bsd
+               ;;
+       convex-c2)
+               basic_machine=c2-convex
+               os=-bsd
+               ;;
+       convex-c32)
+               basic_machine=c32-convex
+               os=-bsd
+               ;;
+       convex-c34)
+               basic_machine=c34-convex
+               os=-bsd
+               ;;
+       convex-c38)
+               basic_machine=c38-convex
+               os=-bsd
+               ;;
+       cray | ymp)
+               basic_machine=ymp-cray
+               os=-unicos
+               ;;
+       cray2)
+               basic_machine=cray2-cray
+               os=-unicos
+               ;;
+       [ctj]90-cray)
+               basic_machine=c90-cray
+               os=-unicos
+               ;;
+       crds | unos)
+               basic_machine=m68k-crds
+               ;;
+       da30 | da30-*)
+               basic_machine=m68k-da30
+               ;;
+       decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+               basic_machine=mips-dec
+               ;;
+       delta | 3300 | motorola-3300 | motorola-delta \
+             | 3300-motorola | delta-motorola)
+               basic_machine=m68k-motorola
+               ;;
+       delta88)
+               basic_machine=m88k-motorola
+               os=-sysv3
+               ;;
+       dpx20 | dpx20-*)
+               basic_machine=rs6000-bull
+               os=-bosx
+               ;;
+       dpx2* | dpx2*-bull)
+               basic_machine=m68k-bull
+               os=-sysv3
+               ;;
+       ebmon29k)
+               basic_machine=a29k-amd
+               os=-ebmon
+               ;;
+       elxsi)
+               basic_machine=elxsi-elxsi
+               os=-bsd
+               ;;
+       encore | umax | mmax)
+               basic_machine=ns32k-encore
+               ;;
+       es1800 | OSE68k | ose68k | ose | OSE)
+               basic_machine=m68k-ericsson
+               os=-ose
+               ;;
+       fx2800)
+               basic_machine=i860-alliant
+               ;;
+       genix)
+               basic_machine=ns32k-ns
+               ;;
+       gmicro)
+               basic_machine=tron-gmicro
+               os=-sysv
+               ;;
+       h3050r* | hiux*)
+               basic_machine=hppa1.1-hitachi
+               os=-hiuxwe2
+               ;;
+       h8300hms)
+               basic_machine=h8300-hitachi
+               os=-hms
+               ;;
+       h8300xray)
+               basic_machine=h8300-hitachi
+               os=-xray
+               ;;
+       h8500hms)
+               basic_machine=h8500-hitachi
+               os=-hms
+               ;;
+       harris)
+               basic_machine=m88k-harris
+               os=-sysv3
+               ;;
+       hp300-*)
+               basic_machine=m68k-hp
+               ;;
+       hp300bsd)
+               basic_machine=m68k-hp
+               os=-bsd
+               ;;
+       hp300hpux)
+               basic_machine=m68k-hp
+               os=-hpux
+               ;;
+       hp3k9[0-9][0-9] | hp9[0-9][0-9])
+               basic_machine=hppa1.0-hp
+               ;;
+       hp9k2[0-9][0-9] | hp9k31[0-9])
+               basic_machine=m68000-hp
+               ;;
+       hp9k3[2-9][0-9])
+               basic_machine=m68k-hp
+               ;;
+       hp9k6[0-9][0-9] | hp6[0-9][0-9])
+               basic_machine=hppa1.0-hp
+               ;;
+       hp9k7[0-79][0-9] | hp7[0-79][0-9])
+               basic_machine=hppa1.1-hp
+               ;;
+       hp9k78[0-9] | hp78[0-9])
+               # FIXME: really hppa2.0-hp
+               basic_machine=hppa1.1-hp
+               ;;
+       hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+               # FIXME: really hppa2.0-hp
+               basic_machine=hppa1.1-hp
+               ;;
+       hp9k8[0-9][13679] | hp8[0-9][13679])
+               basic_machine=hppa1.1-hp
+               ;;
+       hp9k8[0-9][0-9] | hp8[0-9][0-9])
+               basic_machine=hppa1.0-hp
+               ;;
+       hppa-next)
+               os=-nextstep3
+               ;;
+       hppaosf)
+               basic_machine=hppa1.1-hp
+               os=-osf
+               ;;
+       hppro)
+               basic_machine=hppa1.1-hp
+               os=-proelf
+               ;;
+       i370-ibm* | ibm*)
+               basic_machine=i370-ibm
+               ;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+       i[34567]86v32)
+               basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+               os=-sysv32
+               ;;
+       i[34567]86v4*)
+               basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+               os=-sysv4
+               ;;
+       i[34567]86v)
+               basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+               os=-sysv
+               ;;
+       i[34567]86sol2)
+               basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+               os=-solaris2
+               ;;
+       i386mach)
+               basic_machine=i386-mach
+               os=-mach
+               ;;
+       i386-vsta | vsta)
+               basic_machine=i386-unknown
+               os=-vsta
+               ;;
+       i386-go32 | go32)
+               basic_machine=i386-unknown
+               os=-go32
+               ;;
+       i386-mingw32 | mingw32)
+               basic_machine=i386-unknown
+               os=-mingw32
+               ;;
+       i386-qnx | qnx)
+               basic_machine=i386-qnx
+               ;;
+       iris | iris4d)
+               basic_machine=mips-sgi
+               case $os in
+                   -irix*)
+                       ;;
+                   *)
+                       os=-irix4
+                       ;;
+               esac
+               ;;
+       isi68 | isi)
+               basic_machine=m68k-isi
+               os=-sysv
+               ;;
+       m88k-omron*)
+               basic_machine=m88k-omron
+               ;;
+       magnum | m3230)
+               basic_machine=mips-mips
+               os=-sysv
+               ;;
+       merlin)
+               basic_machine=ns32k-utek
+               os=-sysv
+               ;;
+       miniframe)
+               basic_machine=m68000-convergent
+               ;;
+       *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+               basic_machine=m68k-atari
+               os=-mint
+               ;;
+       mipsel*-linux*)
+               basic_machine=mipsel-unknown
+               os=-linux-gnu
+               ;;
+       mips*-linux*)
+               basic_machine=mips-unknown
+               os=-linux-gnu
+               ;;
+       mips3*-*)
+               basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+               ;;
+       mips3*)
+               basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+               ;;
+       monitor)
+               basic_machine=m68k-rom68k
+               os=-coff
+               ;;
+       msdos)
+               basic_machine=i386-unknown
+               os=-msdos
+               ;;
+       mvs)
+               basic_machine=i370-ibm
+               os=-mvs
+               ;;
+       ncr3000)
+               basic_machine=i486-ncr
+               os=-sysv4
+               ;;
+       netbsd386)
+               basic_machine=i386-unknown
+               os=-netbsd
+               ;;
+       netwinder)
+               basic_machine=armv4l-rebel
+               os=-linux
+               ;;
+       news | news700 | news800 | news900)
+               basic_machine=m68k-sony
+               os=-newsos
+               ;;
+       news1000)
+               basic_machine=m68030-sony
+               os=-newsos
+               ;;
+       news-3600 | risc-news)
+               basic_machine=mips-sony
+               os=-newsos
+               ;;
+       necv70)
+               basic_machine=v70-nec
+               os=-sysv
+               ;;
+       next | m*-next )
+               basic_machine=m68k-next
+               case $os in
+                   -nextstep* )
+                       ;;
+                   -ns2*)
+                     os=-nextstep2
+                       ;;
+                   *)
+                     os=-nextstep3
+                       ;;
+               esac
+               ;;
+       nh3000)
+               basic_machine=m68k-harris
+               os=-cxux
+               ;;
+       nh[45]000)
+               basic_machine=m88k-harris
+               os=-cxux
+               ;;
+       nindy960)
+               basic_machine=i960-intel
+               os=-nindy
+               ;;
+       mon960)
+               basic_machine=i960-intel
+               os=-mon960
+               ;;
+       np1)
+               basic_machine=np1-gould
+               ;;
+       op50n-* | op60c-*)
+               basic_machine=hppa1.1-oki
+               os=-proelf
+               ;;
+       OSE68000 | ose68000)
+               basic_machine=m68000-ericsson
+               os=-ose
+               ;;
+       os68k)
+               basic_machine=m68k-none
+               os=-os68k
+               ;;
+       pa-hitachi)
+               basic_machine=hppa1.1-hitachi
+               os=-hiuxwe2
+               ;;
+       paragon)
+               basic_machine=i860-intel
+               os=-osf
+               ;;
+       pbd)
+               basic_machine=sparc-tti
+               ;;
+       pbb)
+               basic_machine=m68k-tti
+               ;;
+        pc532 | pc532-*)
+               basic_machine=ns32k-pc532
+               ;;
+       pentium | p5 | k5 | k6 | nexen)
+               basic_machine=i586-pc
+               ;;
+       pentiumpro | p6 | 6x86)
+               basic_machine=i686-pc
+               ;;
+       pentiumii | pentium2)
+               basic_machine=i786-pc
+               ;;
+       pentium-* | p5-* | k5-* | k6-* | nexen-*)
+               basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       pentiumpro-* | p6-* | 6x86-*)
+               basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       pentiumii-* | pentium2-*)
+               basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       pn)
+               basic_machine=pn-gould
+               ;;
+       power)  basic_machine=rs6000-ibm
+               ;;
+       ppc)    basic_machine=powerpc-unknown
+               ;;
+       ppc-*)  basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       ppcle | powerpclittle | ppc-le | powerpc-little)
+               basic_machine=powerpcle-unknown
+               ;;
+       ppcle-* | powerpclittle-*)
+               basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+               ;;
+       ps2)
+               basic_machine=i386-ibm
+               ;;
+       rom68k)
+               basic_machine=m68k-rom68k
+               os=-coff
+               ;;
+       rm[46]00)
+               basic_machine=mips-siemens
+               ;;
+       rtpc | rtpc-*)
+               basic_machine=romp-ibm
+               ;;
+       sa29200)
+               basic_machine=a29k-amd
+               os=-udi
+               ;;
+       sequent)
+               basic_machine=i386-sequent
+               ;;
+       sh)
+               basic_machine=sh-hitachi
+               os=-hms
+               ;;
+       sparclite-wrs)
+               basic_machine=sparclite-wrs
+               os=-vxworks
+               ;;
+       sps7)
+               basic_machine=m68k-bull
+               os=-sysv2
+               ;;
+       spur)
+               basic_machine=spur-unknown
+               ;;
+       st2000)
+               basic_machine=m68k-tandem
+               ;;
+       stratus)
+               basic_machine=i860-stratus
+               os=-sysv4
+               ;;
+       sun2)
+               basic_machine=m68000-sun
+               ;;
+       sun2os3)
+               basic_machine=m68000-sun
+               os=-sunos3
+               ;;
+       sun2os4)
+               basic_machine=m68000-sun
+               os=-sunos4
+               ;;
+       sun3os3)
+               basic_machine=m68k-sun
+               os=-sunos3
+               ;;
+       sun3os4)
+               basic_machine=m68k-sun
+               os=-sunos4
+               ;;
+       sun4os3)
+               basic_machine=sparc-sun
+               os=-sunos3
+               ;;
+       sun4os4)
+               basic_machine=sparc-sun
+               os=-sunos4
+               ;;
+       sun4sol2)
+               basic_machine=sparc-sun
+               os=-solaris2
+               ;;
+       sun3 | sun3-*)
+               basic_machine=m68k-sun
+               ;;
+       sun4)
+               basic_machine=sparc-sun
+               ;;
+       sun386 | sun386i | roadrunner)
+               basic_machine=i386-sun
+               ;;
+       symmetry)
+               basic_machine=i386-sequent
+               os=-dynix
+               ;;
+       t3e)
+               basic_machine=t3e-cray
+               os=-unicos
+               ;;
+       tx39)
+               basic_machine=mipstx39-unknown
+               ;;
+       tx39el)
+               basic_machine=mipstx39el-unknown
+               ;;
+       tower | tower-32)
+               basic_machine=m68k-ncr
+               ;;
+       udi29k)
+               basic_machine=a29k-amd
+               os=-udi
+               ;;
+       ultra3)
+               basic_machine=a29k-nyu
+               os=-sym1
+               ;;
+       v810 | necv810)
+               basic_machine=v810-nec
+               os=-none
+               ;;
+       vaxv)
+               basic_machine=vax-dec
+               os=-sysv
+               ;;
+       vms)
+               basic_machine=vax-dec
+               os=-vms
+               ;;
+       vpp*|vx|vx-*)
+               basic_machine=f301-fujitsu
+               ;;
+       vxworks960)
+               basic_machine=i960-wrs
+               os=-vxworks
+               ;;
+       vxworks68)
+               basic_machine=m68k-wrs
+               os=-vxworks
+               ;;
+       vxworks29k)
+               basic_machine=a29k-wrs
+               os=-vxworks
+               ;;
+       w65*)
+               basic_machine=w65-wdc
+               os=-none
+               ;;
+       w89k-*)
+               basic_machine=hppa1.1-winbond
+               os=-proelf
+               ;;
+       xmp)
+               basic_machine=xmp-cray
+               os=-unicos
+               ;;
+        xps | xps100)
+               basic_machine=xps100-honeywell
+               ;;
+       z8k-*-coff)
+               basic_machine=z8k-unknown
+               os=-sim
+               ;;
+       none)
+               basic_machine=none-none
+               os=-none
+               ;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+       w89k)
+               basic_machine=hppa1.1-winbond
+               ;;
+       op50n)
+               basic_machine=hppa1.1-oki
+               ;;
+       op60c)
+               basic_machine=hppa1.1-oki
+               ;;
+       mips)
+               if [ x$os = x-linux-gnu ]; then
+                       basic_machine=mips-unknown
+               else
+                       basic_machine=mips-mips
+               fi
+               ;;
+       romp)
+               basic_machine=romp-ibm
+               ;;
+       rs6000)
+               basic_machine=rs6000-ibm
+               ;;
+       vax)
+               basic_machine=vax-dec
+               ;;
+       pdp11)
+               basic_machine=pdp11-dec
+               ;;
+       we32k)
+               basic_machine=we32k-att
+               ;;
+       sparc | sparcv9)
+               basic_machine=sparc-sun
+               ;;
+        cydra)
+               basic_machine=cydra-cydrome
+               ;;
+       orion)
+               basic_machine=orion-highlevel
+               ;;
+       orion105)
+               basic_machine=clipper-highlevel
+               ;;
+       mac | mpw | mac-mpw)
+               basic_machine=m68k-apple
+               ;;
+       pmac | pmac-mpw)
+               basic_machine=powerpc-apple
+               ;;
+       c4x*)
+               basic_machine=c4x-none
+               os=-coff
+               ;;
+       *)
+               echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+               exit 1
+               ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+       *-digital*)
+               basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+               ;;
+       *-commodore*)
+               basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+               ;;
+       *)
+               ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
+       # -solaris* is a basic system type, with this one exception.
+       -solaris1 | -solaris1.*)
+               os=`echo $os | sed -e 's|solaris1|sunos4|'`
+               ;;
+       -solaris)
+               os=-solaris2
+               ;;
+       -svr4*)
+               os=-sysv4
+               ;;
+       -unixware*)
+               os=-sysv4.2uw
+               ;;
+       -gnu/linux*)
+               os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+               ;;
+       # First accept the basic system types.
+       # The portable systems comes first.
+       # Each alternative MUST END IN A *, to match a version number.
+       # -sysv* is not here because it comes later, after sysvr4.
+       -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+             | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+             | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+             | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+             | -aos* \
+             | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+             | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+             | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+             | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+             | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+             | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+             | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+             | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+             | -interix* | -uwin* | -rhapsody* | -opened* | -openstep* | -oskit*)
+       # Remember, each alternative MUST END IN *, to match a version number.
+               ;;
+       -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+             | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+             | -macos* | -mpw* | -magic* | -mon960* | -lnews*)
+               ;;
+       -mac*)
+               os=`echo $os | sed -e 's|mac|macos|'`
+               ;;
+       -linux*)
+               os=`echo $os | sed -e 's|linux|linux-gnu|'`
+               ;;
+       -sunos5*)
+               os=`echo $os | sed -e 's|sunos5|solaris2|'`
+               ;;
+       -sunos6*)
+               os=`echo $os | sed -e 's|sunos6|solaris3|'`
+               ;;
+       -opened*)
+               os=-openedition
+               ;;
+       -osfrose*)
+               os=-osfrose
+               ;;
+       -osf*)
+               os=-osf
+               ;;
+       -utek*)
+               os=-bsd
+               ;;
+       -dynix*)
+               os=-bsd
+               ;;
+       -acis*)
+               os=-aos
+               ;;
+       -386bsd)
+               os=-bsd
+               ;;
+       -ctix* | -uts*)
+               os=-sysv
+               ;;
+       -ns2 )
+               os=-nextstep2
+               ;;
+       # Preserve the version number of sinix5.
+       -sinix5.*)
+               os=`echo $os | sed -e 's|sinix|sysv|'`
+               ;;
+       -sinix*)
+               os=-sysv4
+               ;;
+       -triton*)
+               os=-sysv3
+               ;;
+       -oss*)
+               os=-sysv3
+               ;;
+        -qnx)
+               os=-qnx4
+               ;;
+       -svr4)
+               os=-sysv4
+               ;;
+       -svr3)
+               os=-sysv3
+               ;;
+       -sysvr4)
+               os=-sysv4
+               ;;
+       # This must come after -sysvr4.
+       -sysv*)
+               ;;
+       -ose*)
+               os=-ose
+               ;;
+       -es1800*)
+               os=-ose
+               ;;
+       -xenix)
+               os=-xenix
+               ;;
+        -*mint | -*MiNT)
+               os=-mint
+               ;;
+       -none)
+               ;;
+       *)
+               # Get rid of the `-' at the beginning of $os.
+               os=`echo $os | sed 's/[^-]*-//'`
+               echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+               exit 1
+               ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+       *-acorn)
+               os=-riscix1.2
+               ;;
+       arm*-rebel)
+               os=-linux
+               ;;
+       arm*-semi)
+               os=-aout
+               ;;
+        pdp11-*)
+               os=-none
+               ;;
+       *-dec | vax-*)
+               os=-ultrix4.2
+               ;;
+       m68*-apollo)
+               os=-domain
+               ;;
+       i386-sun)
+               os=-sunos4.0.2
+               ;;
+       m68000-sun)
+               os=-sunos3
+               # This also exists in the configure program, but was not the
+               # default.
+               # os=-sunos4
+               ;;
+       m68*-cisco)
+               os=-aout
+               ;;
+       mips*-cisco)
+               os=-elf
+               ;;
+       mips*-*)
+               os=-elf
+               ;;
+       *-tti)  # must be before sparc entry or we get the wrong os.
+               os=-sysv3
+               ;;
+       sparc-* | *-sun)
+               os=-sunos4.1.1
+               ;;
+       *-be)
+               os=-beos
+               ;;
+       *-ibm)
+               os=-aix
+               ;;
+       *-wec)
+               os=-proelf
+               ;;
+       *-winbond)
+               os=-proelf
+               ;;
+       *-oki)
+               os=-proelf
+               ;;
+       *-hp)
+               os=-hpux
+               ;;
+       *-hitachi)
+               os=-hiux
+               ;;
+       i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+               os=-sysv
+               ;;
+       *-cbm)
+               os=-amigaos
+               ;;
+       *-dg)
+               os=-dgux
+               ;;
+       *-dolphin)
+               os=-sysv3
+               ;;
+       m68k-ccur)
+               os=-rtu
+               ;;
+       m88k-omron*)
+               os=-luna
+               ;;
+       *-next )
+               os=-nextstep
+               ;;
+       *-sequent)
+               os=-ptx
+               ;;
+       *-crds)
+               os=-unos
+               ;;
+       *-ns)
+               os=-genix
+               ;;
+       i370-*)
+               os=-mvs
+               ;;
+       *-next)
+               os=-nextstep3
+               ;;
+        *-gould)
+               os=-sysv
+               ;;
+        *-highlevel)
+               os=-bsd
+               ;;
+       *-encore)
+               os=-bsd
+               ;;
+        *-sgi)
+               os=-irix
+               ;;
+        *-siemens)
+               os=-sysv4
+               ;;
+       *-masscomp)
+               os=-rtu
+               ;;
+       f301-fujitsu)
+               os=-uxpv
+               ;;
+       *-rom68k)
+               os=-coff
+               ;;
+       *-*bug)
+               os=-coff
+               ;;
+       *-apple)
+               os=-macos
+               ;;
+       *-atari*)
+               os=-mint
+               ;;
+       *)
+               os=-none
+               ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+       *-unknown)
+               case $os in
+                       -riscix*)
+                               vendor=acorn
+                               ;;
+                       -sunos*)
+                               vendor=sun
+                               ;;
+                       -aix*)
+                               vendor=ibm
+                               ;;
+                       -beos*)
+                               vendor=be
+                               ;;
+                       -hpux*)
+                               vendor=hp
+                               ;;
+                       -mpeix*)
+                               vendor=hp
+                               ;;
+                       -hiux*)
+                               vendor=hitachi
+                               ;;
+                       -unos*)
+                               vendor=crds
+                               ;;
+                       -dgux*)
+                               vendor=dg
+                               ;;
+                       -luna*)
+                               vendor=omron
+                               ;;
+                       -genix*)
+                               vendor=ns
+                               ;;
+                       -mvs* | -opened*)
+                               vendor=ibm
+                               ;;
+                       -ptx*)
+                               vendor=sequent
+                               ;;
+                       -vxsim* | -vxworks*)
+                               vendor=wrs
+                               ;;
+                       -aux*)
+                               vendor=apple
+                               ;;
+                       -hms*)
+                               vendor=hitachi
+                               ;;
+                       -mpw* | -macos*)
+                               vendor=apple
+                               ;;
+                       -*mint | -*MiNT)
+                               vendor=atari
+                               ;;
+               esac
+               basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+               ;;
+esac
+
+echo $basic_machine$os
diff --git a/boehm-gc/digimars.mak b/boehm-gc/digimars.mak
new file mode 100644 (file)
index 0000000..9778fee
--- /dev/null
@@ -0,0 +1,90 @@
+# Makefile to build Hans Boehm garbage collector using the Digital Mars\r
+# compiler from www.digitalmars.com\r
+# Written by Walter Bright\r
+\r
+\r
+DEFINES=-DNDEBUG -DSILENT -DGC_BUILD -D_WINDOWS -DGC_DLL -DALL_INTERIOR_POINTERS -D__STDC__ -DWIN32_THREADS\r
+CFLAGS=-Iinclude $(DEFINES) -wx -g\r
+LFLAGS=/ma/implib/co\r
+CC=sc\r
+\r
+.c.obj:\r
+       $(CC) -c $(CFLAGS) $*\r
+\r
+.cpp.obj:\r
+       $(CC) -c $(CFLAGS) -Aa $*\r
+\r
+OBJS=  \\r
+       allchblk.obj\\r
+       alloc.obj\\r
+       blacklst.obj\\r
+       checksums.obj\\r
+       dbg_mlc.obj\\r
+       dyn_load.obj\\r
+       finalize.obj\\r
+       gc_cpp.obj\\r
+       headers.obj\\r
+       mach_dep.obj\\r
+       malloc.obj\\r
+       mallocx.obj\\r
+       mark.obj\\r
+       mark_rts.obj\\r
+       misc.obj\\r
+       new_hblk.obj\\r
+       obj_map.obj\\r
+       os_dep.obj\\r
+       ptr_chck.obj\\r
+       reclaim.obj\\r
+       stubborn.obj\\r
+       typd_mlc.obj\\r
+       win32_threads.obj\r
+\r
+targets: gc.dll gc.lib gctest.exe\r
+\r
+gc.dll: $(OBJS) gc.def digimars.mak\r
+       sc -ogc.dll $(OBJS) -L$(LFLAGS) gc.def  kernel32.lib user32.lib\r
+\r
+gc.def: digimars.mak\r
+       echo LIBRARY GC >gc.def\r
+       echo DESCRIPTION "Hans Boehm Garbage Collector" >>gc.def\r
+       echo EXETYPE NT >>gc.def\r
+       echo EXPORTS >>gc.def\r
+       echo GC_is_visible_print_proc >>gc.def\r
+       echo GC_is_valid_displacement_print_proc >>gc.def\r
+\r
+clean:\r
+       del gc.def\r
+       del $(OBJS)\r
+\r
+\r
+gctest.exe : gc.lib tests\test.obj\r
+       sc -ogctest.exe tests\test.obj gc.lib\r
+\r
+tests\test.obj : tests\test.c\r
+       $(CC) -c -g -DNDEBUG -DSILENT -DGC_BUILD -D_WINDOWS -DGC_DLL \\r
+       -DALL_INTERIOR_POINTERS -DWIN32_THREADS \\r
+       -Iinclude tests\test.c -otests\test.obj\r
+\r
+allchblk.obj: allchblk.c\r
+alloc.obj: alloc.c\r
+blacklst.obj: blacklst.c\r
+checksums.obj: checksums.c\r
+dbg_mlc.obj: dbg_mlc.c\r
+dyn_load.obj: dyn_load.c\r
+finalize.obj: finalize.c\r
+gc_cpp.obj: gc_cpp.cpp\r
+headers.obj: headers.c\r
+mach_dep.obj: mach_dep.c\r
+malloc.obj: malloc.c\r
+mallocx.obj: mallocx.c\r
+mark.obj: mark.c\r
+mark_rts.obj: mark_rts.c\r
+misc.obj: misc.c\r
+new_hblk.obj: new_hblk.c\r
+obj_map.obj: obj_map.c\r
+os_dep.obj: os_dep.c\r
+ptr_chck.obj: ptr_chck.c\r
+reclaim.obj: reclaim.c\r
+stubborn.obj: stubborn.c\r
+typd_mlc.obj: typd_mlc.c\r
+win32_threads.obj: win32_threads.c\r
diff --git a/boehm-gc/doc/README.autoconf b/boehm-gc/doc/README.autoconf
new file mode 100644 (file)
index 0000000..53fcf5a
--- /dev/null
@@ -0,0 +1,59 @@
+As of GC6.0alpha8, we attempt to support GNU-style builds based on automake,
+autoconf and libtool.  This is based almost entirely on Tom Tromey's work
+with gcj.
+
+To build and install libraries use
+
+configure; make; make install
+
+The advantages of this process are:
+
+1) It should eventually do a better job of automatically determining the
+right compiler to use, etc.  It probably already does in some cases.
+
+2) It tries to automatically set a good set of default GC parameters for
+the platform (e.g. thread support).  It provides an easier way to configure
+some of the others.
+
+3) It integrates better with other projects using a GNU-style build process.
+
+4) It builds both dynamic and static libraries.
+
+The known disadvantages are:
+
+1) The build scripts are much more complex and harder to debug (though largely
+standard).  I don't understand them all, and there's probably lots of redundant
+stuff.
+
+2) It probably doesn't work on all Un*x-like platforms yet.  It probably will
+never work on the rest.
+
+3) The scripts are not yet complete.  Some of the standard GNU targets don't
+yet work.  (Corrections/additions are very welcome.)
+
+The distribution should contain all files needed to run "configure" and "make",
+as well as the sources needed to regenerate the derived files.  (If I missed
+some, please let me know.)
+
+Note that the distribution comes with a "Makefile" which will be overwritten
+by "configure" with one that is not at all equiavelent to the original.  The
+distribution contains a copy of the original "Makefile" in "Makefile.direct". 
+
+Important options to configure:
+
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [/usr/local]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --enable-threads=TYPE   choose threading package
+  --enable-parallel-mark  parallelize marking and free list construction
+  --enable-full-debug  include full support for pointer backtracing etc.
+
+Unless --prefix is set (or --exec-prefix or one of the more obscure options),
+make install will install libgc.a and libgc.so in /usr/local/bin, which
+would typically require the "make install" to be run as root.
+
+Most commonly --enable-threads=posix or will be needed.  --enable-parallel-mark
+is recommended for multiprocessors if it is supported on the platform.
+
+
diff --git a/boehm-gc/doc/README.macros b/boehm-gc/doc/README.macros
new file mode 100644 (file)
index 0000000..d9df8dd
--- /dev/null
@@ -0,0 +1,78 @@
+The collector uses a large amount of conditional compilation in order to
+deal with platform dependencies.  This violates a number of known coding
+standards.  On the other hand, it seems to be the only practical way to
+support this many platforms without excessive code duplication. 
+
+A few guidelines have mostly been followed in order to keep this manageable:
+
+1) #if and #ifdef directives are properly indented whenever easily possible.
+All known C compilers allow whitespace between the "#" and the "if" to make
+this possible.  ANSI C also allows white space before the "#", though we
+avoid that.  It has the known disadvantages that it differs from the normal
+GNU conventions, and that it makes patches larger than otherwise necessary.
+In my opinion, it's still well worth it, for the same reason that we indent
+ordinary "if" statements.
+
+2) Whenever possible, tests are performed on the macros defined in gcconfig.h
+instead of directly testing patform-specific predefined macros.  This makes it
+relatively easy to adapt to new compilers with a different set of predefined
+macros.  Currently these macros generally identify platforms instead of
+features.  In many cases, this is a mistake.
+
+3) The code currently avoids #elif, eventhough that would make it more
+readable.  This was done since #elif would need to be understood by ALL
+compilers used to build the collector, and that hasn't always been the case.
+It makes sense to reconsider this decision at some point, since #elif has been
+standardized at least since 1989.
+
+Many of the tested configuration macros are at least somewhat defined in
+either include/private/gcconfig.h or in Makefile.direct.  Here is an attempt
+at defining some of the remainder:  (Thanks to Walter Bright for suggesting
+this.  This is a work in progress)
+
+MACRO          EXPLANATION
+-----          -----------
+
+__DMC__        Always #define'd by the Digital Mars compiler. Expands
+               to the compiler version number in hex, i.e. 0x810 is
+               version 8.1b0
+
+_ENABLE_ARRAYNEW
+               #define'd by the Digital Mars C++ compiler when
+               operator new[] and delete[] are separately
+               overloadable. Used in gc_cpp.h.
+
+_MSC_VER       Expands to the Visual C++ compiler version.  Assumed to
+               not be defined for other compilers (at least if they behave
+               appreciably differently).
+
+_DLL           Defined by Visual C++ if dynamic libraries are being built
+               or used.  Used to test whether __declspec(dllimport) or
+               __declspec(dllexport) needs to be added to declarations
+               to support the case in which the collector is in a dll.
+
+GC_DLL         User-settable macro that forces the effect of _DLL.
+
+GC_NOT_DLL     User-settable macro that overrides _DLL, e.g. if dynamic
+               libraries are used, but the collector is in a static library.
+
+__STDC__       Assumed to be defined only by compilers that understand
+               prototypes and other C89 features.  Its value is generally
+               not used, since we are fine with most nonconforming extensions.
+
+SUNOS5SIGS     Solaris-like signal handling.  This is probably misnamed,
+               since it really doesn't guarantee much more than Posix.
+               Currently set only for Solaris2.X, HPUX, and DRSNX.  Should
+               probably be set for some other platforms.
+
+PCR            Set if the collector is being built as part of the Xerox
+               Portable Common Runtime.
+
+SRC_M3         Set if the collector is being built as a replacement of the
+               one in the DEC/Compaq SRC Modula-3 runtime.  I suspect this
+               was last used around 1994, and no doubt broke a long time ago.
+               It's there primarily incase someone wants to port to a similar
+               system.
+
+
+
diff --git a/boehm-gc/doc/debugging.html b/boehm-gc/doc/debugging.html
new file mode 100644 (file)
index 0000000..a186ff5
--- /dev/null
@@ -0,0 +1,289 @@
+<HTML>
+<HEAD>
+<TITLE>Debugging Garbage Collector Related Problems</title>
+</head>
+<BODY>
+<H1>Debugging Garbage Collector Related Problems</h1>
+This page contains some hints on
+debugging issues specific to
+the Boehm-Demers-Weiser conservative garbage collector.
+It applies both to debugging issues in client code that manifest themselves
+as collector misbehavior, and to debugging the collector itself.
+<P>
+If you suspect a bug in the collector itself, it is strongly recommended
+that you try the latest collector release, even if it is labelled as "alpha",
+before proceeding.
+<H2>Bus Errors and Segmentation Violations</h2>
+<P>
+If the fault occurred in GC_find_limit, or with incremental collection enabled,
+this is probably normal.  The collector installs handlers to take care of
+these.  You will not see these unless you are using a debugger.
+Your debugger <I>should</i> allow you to continue.
+It's often preferable to tell the debugger to ignore SIGBUS and SIGSEGV
+("<TT>handle SIGSEGV SIGBUS nostop noprint</tt>" in gdb,
+"<TT>ignore SIGSEGV SIGBUS</tt>" in most versions of dbx)
+and set a breakpoint in <TT>abort</tt>.
+The collector will call abort if the signal had another cause,
+and there was not other handler previously installed.
+<P>
+We recommend debugging without incremental collection if possible.
+(This applies directly to UNIX systems.
+Debugging with incremental collection under win32 is worse.  See README.win32.)
+<P>
+If the application generates an unhandled SIGSEGV or equivalent, it may
+often be easiest to set the environment variable GC_LOOP_ON_ABORT.  On many
+platforms, this will cause the collector to loop in a handler when the
+SIGSEGV is encountered (or when the collector aborts for some other reason),
+and a debugger can then be attached to the looping
+process.  This sidesteps common operating system problems related
+to incomplete core files for multithreaded applications, etc.
+<H2>Other Signals</h2>
+On most platforms, the multithreaded version of the collector needs one or
+two other signals for internal use by the collector in stopping threads.
+It is normally wise to tell the debugger to ignore these.  On Linux,
+the collector currently uses SIGPWR and SIGXCPU by default.
+<H2>Warning Messages About Needing to Allocate Blacklisted Blocks</h2>
+The garbage collector generates warning messages of the form
+<PRE>
+Needed to allocate blacklisted block at 0x...
+</pre>
+when it needs to allocate a block at a location that it knows to be
+referenced by a false pointer.  These false pointers can be either permanent
+(<I>e.g.</i> a static integer variable that never changes) or temporary.
+In the latter case, the warning is largely spurious, and the block will
+eventually be reclaimed normally.
+In the former case, the program will still run correctly, but the block
+will never be reclaimed.  Unless the block is intended to be
+permanent, the warning indicates a memory leak.
+<OL>
+<LI>Ignore these warnings while you are using GC_DEBUG.  Some of the routines
+mentioned below don't have debugging equivalents.  (Alternatively, write
+the missing routines and send them to me.)
+<LI>Replace allocator calls that request large blocks with calls to
+<TT>GC_malloc_ignore_off_page</tt> or
+<TT>GC_malloc_atomic_ignore_off_page</tt>.  You may want to set a
+breakpoint in <TT>GC_default_warn_proc</tt> to help you identify such calls.
+Make sure that a pointer to somewhere near the beginning of the resulting block
+is maintained in a (preferably volatile) variable as long as
+the block is needed.
+<LI>
+If the large blocks are allocated with realloc, we suggest instead allocating
+them with something like the following.  Note that the realloc size increment
+should be fairly large (e.g. a factor of 3/2) for this to exhibit reasonable
+performance.  But we all know we should do that anyway.
+<PRE>
+void * big_realloc(void *p, size_t new_size)
+{
+    size_t old_size = GC_size(p);
+    void * result;
+    if (new_size <= 10000) return(GC_realloc(p, new_size));
+    if (new_size <= old_size) return(p);
+    result = GC_malloc_ignore_off_page(new_size);
+    if (result == 0) return(0);
+    memcpy(result,p,old_size);
+    GC_free(p);
+    return(result);
+}
+</pre>
+
+<LI> In the unlikely case that even relatively small object
+(&lt;20KB) allocations are triggering these warnings, then your address
+space contains lots of "bogus pointers", i.e. values that appear to
+be pointers but aren't.  Usually this can be solved by using GC_malloc_atomic
+or the routines in gc_typed.h to allocate large pointer-free regions of bitmaps, etc.  Sometimes the problem can be solved with trivial changes of encoding
+in certain values.  It is possible, to identify the source of the bogus
+pointers by building the collector with <TT>-DPRINT_BLACK_LIST</tt>,
+which will cause it to print the "bogus pointers", along with their location.
+
+<LI> If you get only a fixed number of these warnings, you are probably only
+introducing a bounded leak by ignoring them.  If the data structures being
+allocated are intended to be permanent, then it is also safe to ignore them.
+The warnings can be turned off by calling GC_set_warn_proc with a procedure
+that ignores these warnings (e.g. by doing absolutely nothing).
+</ol>
+
+<H2>The Collector References a Bad Address in <TT>GC_malloc</tt></h2>
+
+This typically happens while the collector is trying to remove an entry from
+its free list, and the free list pointer is bad because the free list link
+in the last allocated object was bad.
+<P>
+With &gt; 99% probability, you wrote past the end of an allocated object.
+Try setting <TT>GC_DEBUG</tt> before including <TT>gc.h</tt> and
+allocating with <TT>GC_MALLOC</tt>.  This will try to detect such
+overwrite errors.
+
+<H2>Unexpectedly Large Heap</h2>
+
+Unexpected heap growth can be due to one of the following:
+<OL>
+<LI> Data structures that are being unintentionally retained.  This
+is commonly caused by data structures that are no longer being used,
+but were not cleared, or by caches growing without bounds.
+<LI> Pointer misidentification.  The garbage collector is interpreting
+integers or other data as pointers and retaining the "referenced"
+objects.
+<LI> Heap fragmentation.  This should never result in unbounded growth,
+but it may account for larger heaps.  This is most commonly caused
+by allocation of large objects.  On some platforms it can be reduced
+by building with -DUSE_MUNMAP, which will cause the collector to unmap
+memory corresponding to pages that have not been recently used.
+<LI> Per object overhead.  This is usually a relatively minor effect, but
+it may be worth considering.  If the collector recognizes interior
+pointers, object sizes are increased, so that one-past-the-end pointers
+are correctly recognized.  The collector can be configured not to do this
+(<TT>-DDONT_ADD_BYTE_AT_END</tt>).
+<P>
+The collector rounds up object sizes so the result fits well into the
+chunk size (<TT>HBLKSIZE</tt>, normally 4K on 32 bit machines, 8K
+on 64 bit machines) used by the collector.   Thus it may be worth avoiding
+objects of size 2K + 1 (or 2K if a byte is being added at the end.)
+</ol>
+The last two cases can often be identified by looking at the output
+of a call to <TT>GC_dump()</tt>.  Among other things, it will print the
+list of free heap blocks, and a very brief description of all chunks in
+the heap, the object sizes they correspond to, and how many live objects
+were found in the chunk at the last collection.
+<P>
+Growing data structures can usually be identified by
+<OL>
+<LI> Building the collector with <TT>-DKEEP_BACK_PTRS</tt>,
+<LI> Preferably using debugging allocation (defining <TT>GC_DEBUG</tt>
+before including <TT>gc.h</tt> and allocating with <TT>GC_MALLOC</tt>),
+so that objects will be identified by their allocation site,
+<LI> Running the application long enough so
+that most of the heap is composed of "leaked" memory, and
+<LI> Then calling <TT>GC_generate_random_backtrace()</tt> from backptr.h
+a few times to determine why some randomly sampled objects in the heap are
+being retained.
+</ol>
+<P>
+The same technique can often be used to identify problems with false
+pointers, by noting whether the reference chains printed by
+<TT>GC_generate_random_backtrace()</tt> involve any misidentified pointers.
+An alternate technique is to build the collector with
+<TT>-DPRINT_BLACK_LIST</tt> which will cause it to report values that
+are almost, but not quite, look like heap pointers.  It is very likely that
+actual false pointers will come from similar sources.
+<P>
+In the unlikely case that false pointers are an issue, it can usually
+be resolved using one or more of the following techniques:
+<OL>
+<LI> Use <TT>GC_malloc_atomic</tt> for objects containing no pointers.
+This is especially important for large arrays containing compressed data,
+pseudo-random numbers, and the like.  It is also likely to improve GC
+performance, perhaps drastically so if the application is paging.
+<LI> If you allocate large objects containing only
+one or two pointers at the beginning, either try the typed allocation
+primitives is <TT>gc_typed.h</tt>, or separate out the pointerfree component.
+<LI> Consider using <TT>GC_malloc_ignore_off_page()</tt>
+to allocate large objects.  (See <TT>gc.h</tt> and above for details.
+Large means &gt; 100K in most environments.)
+</ol>
+<H2>Prematurely Reclaimed Objects</h2>
+The usual symptom of this is a segmentation fault, or an obviously overwritten
+value in a heap object.  This should, of course, be impossible.  In practice,
+it may happen for reasons like the following:
+<OL>
+<LI> The collector did not intercept the creation of threads correctly in
+a multithreaded application, <I>e.g.</i> because the client called
+<TT>pthread_create</tt> without including <TT>gc.h</tt>, which redefines it.
+<LI> The last pointer to an object in the garbage collected heap was stored
+somewhere were the collector couldn't see it, <I>e.g.</i> in an
+object allocated with system <TT>malloc</tt>, in certain types of
+<TT>mmap</tt>ed files,
+or in some data structure visible only to the OS.  (On some platforms,
+thread-local storage is one of these.)
+<LI> The last pointer to an object was somehow disguised, <I>e.g.</i> by
+XORing it with another pointer.
+<LI> Incorrect use of <TT>GC_malloc_atomic</tt> or typed allocation.
+<LI> An incorrect <TT>GC_free</tt> call.
+<LI> The client program overwrote an internal garbage collector data structure.
+<LI> A garbage collector bug.
+<LI> (Empirically less likely than any of the above.) A compiler optimization
+that disguised the last pointer.
+</ol>
+The following relatively simple techniques should be tried first to narrow
+down the problem:
+<OL>
+<LI> If you are using the incremental collector try turning it off for
+debugging.
+<LI> Try to reproduce the problem with fully debuggable unoptimized code.
+This will eliminate the last possibility, as well as making debugging easier.
+<LI> Try replacing any suspect typed allocation and <TT>GC_malloc_atomic</tt>
+calls with calls to <TT>GC_malloc</tt>.
+<LI> Try removing any GC_free calls (<I>e.g.</i> with a suitable
+<TT>#define</tt>).
+<LI> Rebuild the collector with <TT>-DGC_ASSERTIONS</tt>.
+<LI> If the following works on your platform (i.e. if gctest still works
+if you do this), try building the collector with
+<TT>-DREDIRECT_MALLOC=GC_malloc_uncollectable</tt>.  This will cause
+the collector to scan memory allocated with malloc.
+</ol>
+If all else fails, you will have to attack this with a debugger.
+Suggested steps:
+<OL>
+<LI> Call <TT>GC_dump()</tt> from the debugger around the time of the failure.  Verify
+that the collectors idea of the root set (i.e. static data regions which
+it should scan for pointers) looks plausible.  If not, i.e. if it doesn't
+include some static variables, report this as
+a collector bug.  Be sure to describe your platform precisely, since this sort
+of problem is nearly always very platform dependent.
+<LI> Especially if the failure is not deterministic, try to isolate it to
+a relatively small test case.
+<LI> Set a break point in <TT>GC_finish_collection</tt>.  This is a good
+point to examine what has been marked, i.e. found reachable, by the
+collector.
+<LI> If the failure is deterministic, run the process
+up to the last collection before the failure.
+Note that the variable <TT>GC_gc_no</tt> counts collections and can be used
+to set a conditional breakpoint in the right one.  It is incremented just
+before the call to GC_finish_collection.
+If object <TT>p</tt> was prematurely recycled, it may be helpful to
+look at <TT>*GC_find_header(p)</tt> at the failure point.
+The <TT>hb_last_reclaimed</tt> field will identify the collection number
+during which its block was last swept.
+<LI> Verify that the offending object still has its correct contents at
+this point.
+The call <TT>GC_is_marked(p)</tt> from the debugger to verify that the
+object has not been marked, and is about to be reclaimed.
+<LI> Determine a path from a root, i.e. static variable, stack, or
+register variable,
+to the reclaimed object.  Call <TT>GC_is_marked(q)</tt> for each object
+<TT>q</tt> along the path, trying to locate the first unmarked object, say
+<TT>r</tt>.
+<LI> If <TT>r</tt> is pointed to by a static root,
+verify that the location
+pointing to it is part of the root set printed by <TT>GC_dump()</tt>.  If it
+is on the stack in the main (or only) thread, verify that
+<TT>GC_stackbottom</tt> is set correctly to the base of the stack.  If it is
+in another thread stack, check the collector's thread data structure
+(<TT>GC_thread[]</tt> on several platforms) to make sure that stack bounds
+are set correctly.
+<LI> If <TT>r</tt> is pointed to by heap object <TT>s</tt>, check that the
+collector's layout description for <TT>s</tt> is such that the pointer field
+will be scanned.  Call <TT>*GC_find_header(s)</tt> to look at the descriptor
+for the heap chunk.  The <TT>hb_descr</tt> field specifies the layout
+of objects in that chunk.  See gc_mark.h for the meaning of the descriptor.
+(If it's low order 2 bits are zero, then it is just the length of the
+object prefix to be scanned.  This form is always used for objects allocated
+with <TT>GC_malloc</tt> or <TT>GC_malloc_atomic</tt>.)
+<LI> If the failure is not deterministic, you may still be able to apply some
+of the above technique at the point of failure.  But remember that objects
+allocated since the last collection will not have been marked, even if the
+collector is functioning properly.  On some platforms, the collector
+can be configured to save call chains in objects for debugging.
+Enabling this feature will also cause it to save the call stack at the
+point of the last GC in GC_arrays._last_stack.
+<LI> When looking at GC internal data structures remember that a number
+of <TT>GC_</tt><I>xxx</i> variables are really macro defined to
+<TT>GC_arrays._</tt><I>xxx</i>, so that
+the collector can avoid scanning them.
+</ol>
+</body>
+</html>
+
+
+
+
diff --git a/boehm-gc/doc/gcdescr.html b/boehm-gc/doc/gcdescr.html
new file mode 100644 (file)
index 0000000..65e8a8f
--- /dev/null
@@ -0,0 +1,438 @@
+<HTML>
+<HEAD>
+    <TITLE> Conservative GC Algorithmic Overview </TITLE>
+    <AUTHOR> Hans-J. Boehm, Silicon Graphics</author>
+</HEAD>
+<BODY>
+<H1> <I>This is under construction</i> </h1>
+<H1> Conservative GC Algorithmic Overview </h1>
+<P>
+This is a description of the algorithms and data structures used in our
+conservative garbage collector.  I expect the level of detail to increase
+with time.  For a survey of GC algorithms, see for example
+<A HREF="ftp://ftp.cs.utexas.edu/pub/garbage/gcsurvey.ps"> Paul Wilson's
+excellent paper</a>.  For an overview of the collector interface,
+see <A HREF="gcinterface.html">here</a>.
+<P>
+This description is targeted primarily at someone trying to understand the
+source code.  It specifically refers to variable and function names.
+It may also be useful for understanding the algorithms at a higher level.
+<P>
+The description here assumes that the collector is used in default mode.
+In particular, we assume that it used as a garbage collector, and not just
+a leak detector.  We initially assume that it is used in stop-the-world,
+non-incremental mode, though the presence of the incremental collector
+will be apparent in the design.
+We assume the default finalization model, but the code affected by that
+is very localized.
+<H2> Introduction </h2>
+The garbage collector uses a modified mark-sweep algorithm.  Conceptually
+it operates roughly in four phases:
+
+<OL>
+
+<LI>
+<I>Preparation</i> Clear all mark bits, indicating that all objects
+are potentially unreachable.
+
+<LI>
+<I>Mark phase</i> Marks all objects that can be reachable via chains of
+pointers from variables.  Normally the collector has no real information
+about the location of pointer variables in the heap, so it
+views all static data areas, stacks and registers as potentially containing
+containing pointers.  Any bit patterns that represent addresses inside
+heap objects managed by the collector are viewed as pointers.
+Unless the client program has made heap object layout information
+available to the collector, any heap objects found to be reachable from
+variables are again scanned similarly.
+
+<LI>
+<I>Sweep phase</i> Scans the heap for inaccessible, and hence unmarked,
+objects, and returns them to an appropriate free list for reuse.  This is
+not really a separate phase; even in non incremental mode this is operation
+is usually performed on demand during an allocation that discovers an empty
+free list.  Thus the sweep phase is very unlikely to touch a page that
+would not have been touched shortly thereafter anyway.
+
+<LI>
+<I>Finalization phase</i> Unreachable objects which had been registered
+for finalization are enqueued for finalization outside the collector.
+
+</ol>
+
+<P>
+The remaining sections describe the memory allocation data structures,
+and then the last 3 collection phases in more detail. We conclude by
+outlining some of the additional features implemented in the collector.
+
+<H2>Allocation</h2>
+The collector includes its own memory allocator.  The allocator obtains
+memory from the system in a platform-dependent way.  Under UNIX, it
+uses either <TT>malloc</tt>, <TT>sbrk</tt>, or <TT>mmap</tt>.
+<P>
+Most static data used by the allocator, as well as that needed by the
+rest of the garbage collector is stored inside the
+<TT>_GC_arrays</tt> structure.
+This allows the garbage collector to easily ignore the collectors own
+data structures when it searches for root pointers.  Other allocator
+and collector internal data structures are allocated dynamically
+with <TT>GC_scratch_alloc</tt>. <TT>GC_scratch_alloc</tt> does not
+allow for deallocation, and is therefore used only for permanent data
+structures.
+<P>
+The allocator allocates objects of different <I>kinds</i>.
+Different kinds are handled somewhat differently by certain parts
+of the garbage collector.  Certain kinds are scanned for pointers,
+others are not.  Some may have per-object type descriptors that
+determine pointer locations.  Or a specific kind may correspond
+to one specific object layout.  Two built-in kinds are uncollectable.
+One (<TT>STUBBORN</tt>) is immutable without special precautions.
+In spite of that, it is very likely that most applications currently
+use at most two kinds: <TT>NORMAL</tt> and <TT>PTRFREE</tt> objects.
+<P>
+The collector uses a two level allocator.  A large block is defined to
+be one larger than half of <TT>HBLKSIZE</tt>, which is a power of 2,
+typically on the order of the page size.
+<P>
+Large block sizes are rounded up to
+the next multiple of <TT>HBLKSIZE</tt> and then allocated by
+<TT>GC_allochblk</tt>.  This uses roughly what Paul Wilson has termed
+a "next fit" algorithm, i.e. first-fit with a rotating pointer.
+The implementation does check for a better fitting immediately
+adjacent block, which gives it somewhat better fragmentation characteristics.
+I'm now convinced it should use a best fit algorithm.  The actual
+implementation of <TT>GC_allochblk</tt>
+is significantly complicated by black-listing issues
+(see below).
+<P>
+Small blocks are allocated in blocks of size <TT>HBLKSIZE</tt>.
+Each block is
+dedicated to only one object size and kind.  The allocator maintains
+separate free lists for each size and kind of object.
+<P>
+In order to avoid allocating blocks for too many distinct object sizes,
+the collector normally does not directly allocate objects of every possible
+request size.  Instead request are rounded up to one of a smaller number
+of allocated sizes, for which free lists are maintained.  The exact
+allocated sizes are computed on demand, but subject to the constraint
+that they increase roughly in geometric progression.  Thus objects
+requested early in the execution are likely to be allocated with exactly
+the requested size, subject to alignment constraints.
+See <TT>GC_init_size_map</tt> for details.
+<P>
+The actual size rounding operation during small object allocation is
+implemented as a table lookup in <TT>GC_size_map</tt>.
+<P>
+Both collector initialization and computation of allocated sizes are
+handled carefully so that they do not slow down the small object fast
+allocation path.  An attempt to allocate before the collector is initialized,
+or before the appropriate <TT>GC_size_map</tt> entry is computed,
+will take the same path as an allocation attempt with an empty free list.
+This results in a call to the slow path code (<TT>GC_generic_malloc_inner</tt>)
+which performs the appropriate initialization checks.
+<P>
+In non-incremental mode, we make a decision about whether to garbage collect
+whenever an allocation would otherwise have failed with the current heap size.
+If the total amount of allocation since the last collection is less than
+the heap size divided by <TT>GC_free_space_divisor</tt>, we try to
+expand the heap.  Otherwise, we initiate a garbage collection.  This ensures
+that the amount of garbage collection work per allocated byte remains
+constant.
+<P>
+The above is in fat an oversimplification of the real heap expansion
+heuristic, which adjusts slightly for root size and certain kinds of
+fragmentation.  In particular, programs with a large root set size and
+little live heap memory will expand the heap to amortize the cost of
+scanning the roots.
+<P>
+Versions 5.x of the collector actually collect more frequently in
+nonincremental mode.  The large block allocator usually refuses to split
+large heap blocks once the garbage collection threshold is
+reached.  This often has the effect of collecting well before the
+heap fills up, thus reducing fragmentation and working set size at the
+expense of GC time.  6.x will chose an intermediate strategy depending
+on how much large object allocation has taken place in the past.
+(If the collector is configured to unmap unused pages, versions 6.x
+will use the 5.x strategy.)
+<P>
+(It has been suggested that this should be adjusted so that we favor
+expansion if the resulting heap still fits into physical memory.
+In many cases, that would no doubt help.  But it is tricky to do this
+in a way that remains robust if multiple application are contending
+for a single pool of physical memory.)
+
+<H2>Mark phase</h2>
+
+The marker maintains an explicit stack of memory regions that are known
+to be accessible, but that have not yet been searched for contained pointers.
+Each stack entry contains the starting address of the block to be scanned,
+as well as a descriptor of the block.  If no layout information is
+available for the block, then the descriptor is simply a length.
+(For other possibilities, see <TT>gc_mark.h</tt>.)
+<P>
+At the beginning of the mark phase, all root segments are pushed on the
+stack by <TT>GC_push_roots</tt>.  If <TT>ALL_INTERIOR_PTRS</tt> is not
+defined, then stack roots require special treatment.  In this case, the
+normal marking code ignores interior pointers, but <TT>GC_push_all_stack</tt>
+explicitly checks for interior pointers and pushes descriptors for target
+objects.
+<P>
+The marker is structured to allow incremental marking.
+Each call to <TT>GC_mark_some</tt> performs a small amount of
+work towards marking the heap.
+It maintains
+explicit state in the form of <TT>GC_mark_state</tt>, which
+identifies a particular sub-phase.  Some other pieces of state, most
+notably the mark stack, identify how much work remains to be done
+in each sub-phase.  The normal progression of mark states for
+a stop-the-world collection is:
+<OL>
+<LI> <TT>MS_INVALID</tt> indicating that there may be accessible unmarked
+objects.  In this case <TT>GC_objects_are_marked</tt> will simultaneously
+be false, so the mark state is advanced to
+<LI> <TT>MS_PUSH_UNCOLLECTABLE</tt> indicating that it suffices to push
+uncollectable objects, roots, and then mark everything reachable from them.
+<TT>Scan_ptr</tt> is advanced through the heap until all uncollectable
+objects are pushed, and objects reachable from them are marked.
+At that point, the next call to <TT>GC_mark_some</tt> calls
+<TT>GC_push_roots</tt> to push the roots.  It the advances the
+mark state to
+<LI> <TT>MS_ROOTS_PUSHED</tt> asserting that once the mark stack is
+empty, all reachable objects are marked.  Once in this state, we work
+only on emptying the mark stack.  Once this is completed, the state
+changes to
+<LI> <TT>MS_NONE</tt> indicating that reachable objects are marked.
+</ol>
+
+The core mark routine <TT>GC_mark_from_mark_stack</tt>, is called
+repeatedly by several of the sub-phases when the mark stack starts to fill
+up.  It is also called repeatedly in <TT>MS_ROOTS_PUSHED</tt> state
+to empty the mark stack.
+The routine is designed to only perform a limited amount of marking at
+each call, so that it can also be used by the incremental collector.
+It is fairly carefully tuned, since it usually consumes a large majority
+of the garbage collection time.
+<P>
+The marker correctly handles mark stack overflows.  Whenever the mark stack
+overflows, the mark state is reset to <TT>MS_INVALID</tt>.
+Since there are already marked objects in the heap,
+this eventually forces a complete
+scan of the heap, searching for pointers, during which any unmarked objects
+referenced by marked objects are again pushed on the mark stack.  This
+process is repeated until the mark phase completes without a stack overflow.
+Each time the stack overflows, an attempt is made to grow the mark stack.
+All pieces of the collector that push regions onto the mark stack have to be
+careful to ensure forward progress, even in case of repeated mark stack
+overflows.  Every mark attempt results in additional marked objects.
+<P>
+Each mark stack entry is processed by examining all candidate pointers
+in the range described by the entry.  If the region has no associated
+type information, then this typically requires that each 4-byte aligned
+quantity (8-byte aligned with 64-bit pointers) be considered a candidate
+pointer.
+<P>
+We determine whether a candidate pointer is actually the address of
+a heap block.  This is done in the following steps:
+<NL>
+<LI> The candidate pointer is checked against rough heap bounds.
+These heap bounds are maintained such that all actual heap objects
+fall between them.  In order to facilitate black-listing (see below)
+we also include address regions that the heap is likely to expand into.
+Most non-pointers fail this initial test.
+<LI> The candidate pointer is divided into two pieces; the most significant
+bits identify a <TT>HBLKSIZE</tt>-sized page in the address space, and
+the least significant bits specify an offset within that page.
+(A hardware page may actually consist of multiple such pages.
+HBLKSIZE is usually the page size divided by a small power of two.)
+<LI>
+The page address part of the candidate pointer is looked up in a
+<A HREF="tree.html">table</a>.
+Each table entry contains either 0, indicating that the page is not part
+of the garbage collected heap, a small integer <I>n</i>, indicating
+that the page is part of large object, starting at least <I>n</i> pages
+back, or a pointer to a descriptor for the page.  In the first case,
+the candidate pointer i not a true pointer and can be safely ignored.
+In the last two cases, we can obtain a descriptor for the page containing
+the beginning of the object.
+<LI>
+The starting address of the referenced object is computed.
+The page descriptor contains the size of the object(s)
+in that page, the object kind, and the necessary mark bits for those
+objects.  The size information can be used to map the candidate pointer
+to the object starting address.  To accelerate this process, the page header
+also contains a pointer to a precomputed map of page offsets to displacements
+from the beginning of an object.  The use of this map avoids a
+potentially slow integer remainder operation in computing the object
+start address.
+<LI>
+The mark bit for the target object is checked and set.  If the object
+was previously unmarked, the object is pushed on the mark stack.
+The descriptor is read from the page descriptor.  (This is computed
+from information <TT>GC_obj_kinds</tt> when the page is first allocated.)
+</nl>
+<P>
+At the end of the mark phase, mark bits for left-over free lists are cleared,
+in case a free list was accidentally marked due to a stray pointer.
+
+<H2>Sweep phase</h2>
+
+At the end of the mark phase, all blocks in the heap are examined.
+Unmarked large objects are immediately returned to the large object free list.
+Each small object page is checked to see if all mark bits are clear.
+If so, the entire page is returned to the large object free list.
+Small object pages containing some reachable object are queued for later
+sweeping.
+<P>
+This initial sweep pass touches only block headers, not
+the blocks themselves.  Thus it does not require significant paging, even
+if large sections of the heap are not in physical memory.
+<P>
+Nonempty small object pages are swept when an allocation attempt
+encounters an empty free list for that object size and kind.
+Pages for the correct size and kind are repeatedly swept until at
+least one empty block is found.  Sweeping such a page involves
+scanning the mark bit array in the page header, and building a free
+list linked through the first words in the objects themselves.
+This does involve touching the appropriate data page, but in most cases
+it will be touched only just before it is used for allocation.
+Hence any paging is essentially unavoidable.
+<P>
+Except in the case of pointer-free objects, we maintain the invariant
+that any object in a small object free list is cleared (except possibly
+for the link field).  Thus it becomes the burden of the small object
+sweep routine to clear objects.  This has the advantage that we can
+easily recover from accidentally marking a free list, though that could
+also be handled by other means.  The collector currently spends a fair
+amount of time clearing objects, and this approach should probably be
+revisited.
+<P>
+In most configurations, we use specialized sweep routines to handle common
+small object sizes.  Since we allocate one mark bit per word, it becomes
+easier to examine the relevant mark bits if the object size divides
+the word length evenly.  We also suitably unroll the inner sweep loop
+in each case.  (It is conceivable that profile-based procedure cloning
+in the compiler could make this unnecessary and counterproductive.  I
+know of no existing compiler to which this applies.)
+<P>
+The sweeping of small object pages could be avoided completely at the expense
+of examining mark bits directly in the allocator.  This would probably
+be more expensive, since each allocation call would have to reload
+a large amount of state (e.g. next object address to be swept, position
+in mark bit table) before it could do its work.  The current scheme
+keeps the allocator simple and allows useful optimizations in the sweeper.
+
+<H2>Finalization</h2>
+Both <TT>GC_register_disappearing_link</tt> and
+<TT>GC_register_finalizer</tt> add the request to a corresponding hash
+table.  The hash table is allocated out of collected memory, but
+the reference to the finalizable object is hidden from the collector.
+Currently finalization requests are processed non-incrementally at the
+end of a mark cycle.  
+<P>
+The collector makes an initial pass over the table of finalizable objects,
+pushing the contents of unmarked objects onto the mark stack.
+After pushing each object, the marker is invoked to mark all objects
+reachable from it.  The object itself is not explicitly marked.
+This assures that objects on which a finalizer depends are neither
+collected nor finalized.
+<P>
+If in the process of marking from an object the
+object itself becomes marked, we have uncovered
+a cycle involving the object.  This usually results in a warning from the
+collector.  Such objects are not finalized, since it may be
+unsafe to do so.  See the more detailed
+<A HREF="finalization.html"> discussion of finalization semantics</a>.
+<P>
+Any objects remaining unmarked at the end of this process are added to
+a queue of objects whose finalizers can be run.  Depending on collector
+configuration, finalizers are dequeued and run either implicitly during
+allocation calls, or explicitly in response to a user request.
+<P>
+The collector provides a mechanism for replacing the procedure that is
+used to mark through objects.  This is used both to provide support for
+Java-style unordered finalization, and to ignore certain kinds of cycles,
+<I>e.g.</i> those arising from C++ implementations of virtual inheritance.
+
+<H2>Generational Collection and Dirty Bits</h2>
+We basically use the parallel and generational GC algorithm described in
+<A HREF="papers/pldi91.ps.gz">"Mostly Parallel Garbage Collection"</a>,
+by Boehm, Demers, and Shenker.
+<P>
+The most significant modification is that
+the collector always runs in the allocating thread.
+There is no separate garbage collector thread.
+If an allocation attempt either requests a large object, or encounters
+an empty small object free list, and notices that there is a collection
+in progress, it immediately performs a small amount of marking work
+as described above.
+<P>
+This change was made both because we wanted to easily accommodate
+single-threaded environments, and because a separate GC thread requires
+very careful control over the scheduler to prevent the mutator from
+out-running the collector, and hence provoking unneeded heap growth.
+<P>
+In incremental mode, the heap is always expanded when we encounter
+insufficient space for an allocation.  Garbage collection is triggered
+whenever we notice that more than
+<TT>GC_heap_size</tt>/2 * <TT>GC_free_space_divisor</tt>
+bytes of allocation have taken place.
+After <TT>GC_full_freq</tt> minor collections a major collection
+is started.
+<P>
+All collections initially run interrupted until a predetermined
+amount of time (50 msecs by default) has expired.  If this allows
+the collection to complete entirely, we can avoid correcting
+for data structure modifications during the collection.  If it does
+not complete, we return control to the mutator, and perform small
+amounts of additional GC work during those later allocations that
+cannot be satisfied from small object free lists. When marking completes,
+the set of modified pages is retrieved, and we mark once again from
+marked objects on those pages, this time with the mutator stopped.
+<P>
+We keep track of modified pages using one of three distinct mechanisms:
+<OL>
+<LI>
+Through explicit mutator cooperation.  Currently this requires
+the use of <TT>GC_malloc_stubborn</tt>.
+<LI>
+By write-protecting physical pages and catching write faults.  This is
+implemented for many Unix-like systems and for win32.  It is not possible
+in a few environments.
+<LI>
+By retrieving dirty bit information from /proc.  (Currently only Sun's
+Solaris supports this.  Though this is considerably cleaner, performance
+may actually be better with mprotect and signals.)
+</ol>
+
+<H2>Thread support</h2>
+We support several different threading models.  Unfortunately Pthreads,
+the only reasonably well standardized thread model, supports too narrow
+an interface for conservative garbage collection.  There appears to be
+no portable way to allow the collector to coexist with various Pthreads
+implementations.  Hence we currently support only a few of the more
+common Pthreads implementations.
+<P>
+In particular, it is very difficult for the collector to stop all other
+threads in the system and examine the register contents.  This is currently
+accomplished with very different mechanisms for different Pthreads
+implementations.  The Solaris implementation temporarily disables much
+of the user-level threads implementation by stopping kernel-level threads
+("lwp"s).  The Irix implementation sends signals to individual Pthreads
+and has them wait in the signal handler.  The Linux implementation
+is similar in spirit to the Irix one.
+<P>
+The Irix implementation uses
+only documented Pthreads calls, but relies on extensions to their semantics,
+notably the use of mutexes and condition variables from signal
+handlers.  The Linux implementation should be far closer to
+portable, though impirically it is not completely portable.
+<P>
+All implementations must
+intercept thread creation and a few other thread-specific calls to allow
+enumeration of threads and location of thread stacks.  This is current
+accomplished with <TT># define</tt>'s in <TT>gc.h</tt>, or optionally
+by using ld's function call wrapping mechanism under Linux.
+<P>
+Comments are appreciated.  Please send mail to
+<A HREF="mailto:boehm@acm.org"><TT>boehm@acm.org</tt></a>
+</body>
diff --git a/boehm-gc/doc/tree.html b/boehm-gc/doc/tree.html
new file mode 100644 (file)
index 0000000..89c515d
--- /dev/null
@@ -0,0 +1,198 @@
+<HTML>
+<HEAD>
+    <TITLE>  Two-Level Tree Structure for Fast Pointer Lookup</TITLE>
+    <AUTHOR> Hans-J. Boehm, Silicon Graphics</author>
+</HEAD>
+<BODY>
+<H1>Two-Level Tree Structure for Fast Pointer Lookup</h1>
+<P>
+The conservative garbage collector described
+<A HREF="gc.html">here</a> uses a 2-level tree
+data structure to aid in fast pointer identification.
+This data structure is described in a bit more detail here, since
+<OL>
+<LI> Variations of the data structure are more generally useful.
+<LI> It appears to be hard to understand by reading the code.
+<LI> Some other collectors appear to use inferior data structures to
+solve the same problem.
+<LI> It is central to fast collector operation.
+</ol>
+A candidate pointer is divided into three sections, the <I>high</i>,
+<I>middle</i>, and <I>low</i> bits.  The exact division between these
+three groups of bits is dependent on the detailed collector configuration.
+<P>
+The high and middle bits are used to look up an entry in the table described
+here.  The resulting table entry consists of either a block descriptor
+(<TT>struct hblkhdr *</tt> or <TT>hdr *</tt>)
+identifying the layout of objects in the block, or an indication that this
+address range corresponds to the middle of a large block, together with a
+hint for locating the actual block descriptor.  Such a hint consist
+of a displacement that can be subtracted from the middle bits of the candidate
+pointer without leaving the object.
+<P>
+In either case, the block descriptor (<TT>struct hblkhdr</tt>)
+refers to a table of object starting addresses (the <TT>hb_map</tt> field).
+The starting address table is indexed by the low bits if the candidate pointer.
+The resulting entry contains a displacement to the beginning of the object,
+or an indication that this cannot be a valid object pointer.
+(If all interior pointer are recognized, pointers into large objects
+are handled specially, as appropriate.)
+
+<H2>The Tree</h2>
+<P>
+The rest of this discussion focuses on the two level data structure
+used to map the high and middle bits to the block descriptor.
+<P>
+The high bits are used as an index into the <TT>GC_top_index</tt> (really
+<TT>GC_arrays._top_index</tt>) array.  Each entry points to a
+<TT>bottom_index</tt> data structure.  This structure in turn consists
+mostly of an array <TT>index</tt> indexed by the middle bits of
+the candidate pointer.  The <TT>index</tt> array contains the actual
+<TT>hdr</tt> pointers. 
+<P>
+Thus a pointer lookup consists primarily of a handful of memory references,
+and can be quite fast:
+<OL>
+<LI> The appropriate <TT>bottom_index</tt> pointer is looked up in
+<TT>GC_top_index</tt>, based on the high bits of the candidate pointer.
+<LI> The appropriate <TT>hdr</tt> pointer is looked up in the
+<TT>bottom_index</tt> structure, based on the middle bits.
+<LI> The block layout map pointer is retrieved from the <TT>hdr</tt>
+structure.  (This memory reference is necessary since we try to share
+block layout maps.)
+<LI> The displacement to the beginning of the object is retrieved from the
+above map.
+</ol>
+<P>
+In order to conserve space, not all <TT>GC_top_index</tt> entries in fact
+point to distinct <TT>bottom_index</tt> structures.  If no address with
+the corresponding high bits is part of the heap, then the entry points
+to <TT>GC_all_nils</tt>, a single <TT>bottom_index</tt> structure consisting
+only of NULL <TT>hdr</tt> pointers.
+<P>
+<TT>Bottom_index</tt> structures contain slightly more information than
+just <TT>hdr</tt> pointers.  The <TT>asc_link</tt> field is used to link
+all <TT>bottom_index</tt> structures in ascending order for fast traversal.
+This list is pointed to be <TT>GC_all_bottom_indices</tt>.
+It is maintained with the aid of <TT>key</tt> field that contains the
+high bits corresponding to the <TT>bottom_index</tt>.
+
+<H2>64 bit addresses</h2>
+<P>
+In the case of 64 bit addresses, this picture is complicated slightly
+by the fact that one of the index structures would have to be huge to
+cover the entire address space with a two level tree.  We deal with this
+by turning <TT>GC_top_index</tt> into a chained hash table, instead of
+a simple array.  This adds a <TT>hash_link</tt> field to the
+<TT>bottom_index</tt> structure.
+<P>
+The "hash function" consists of dropping the high bits.  This is cheap to
+compute, and guarantees that there will be no collisions if the heap
+is contiguous and not excessively large.
+
+<H2>A picture</h2>
+<P>
+The following is an ASCII diagram of the data structure.
+This was contributed by Dave Barrett several years ago.
+<PRE>
+
+               Data Structure used by GC_base in gc3.7:
+                             21-Apr-94
+                        
+                       
+
+
+    63                  LOG_TOP_SZ[11]  LOG_BOTTOM_SZ[10]   LOG_HBLKSIZE[13]
+   +------------------+----------------+------------------+------------------+
+ p:|                  |   TL_HASH(hi)  |                  |   HBLKDISPL(p)   |
+   +------------------+----------------+------------------+------------------+
+    \-----------------------HBLKPTR(p)-------------------/
+    \------------hi-------------------/ 
+                      \______ ________/ \________ _______/ \________ _______/
+                             V                   V                  V
+                             |                   |                  |
+           GC_top_index[]    |                   |                  | 
+ ---      +--------------+   |                   |                  |  
+  ^       |              |   |                   |                  |   
+  |       |              |   |                   |                  |   
+ TOP      +--------------+<--+                   |                  |      
+ _SZ   +-<|      []      | *                     |                  |     
+(items)|  +--------------+  if 0 < bi< HBLKSIZE  |                  |    
+  |    |  |              | then large object     |                  |    
+  |    |  |              | starts at the bi'th   |                  |    
+  v    |  |              | HBLK before p.        |             i    |    
+ ---   |  +--------------+                       |          (word-  |    
+       v                                         |         aligned) |    
+   bi= |GET_BI(p){->hash_link}->key==hi          |                  |   
+       v                                         |                  |    
+       |   (bottom_index)  \ scratch_alloc'd     |                  |    
+       |   ( struct  bi )  / by get_index()      |                  |    
+ ---   +->+--------------+                       |                  |    
+  ^       |              |                       |                  |
+  ^       |              |                       |                  |
+ BOTTOM   |              |   ha=GET_HDR_ADDR(p)  |                  |
+_SZ(items)+--------------+<----------------------+          +-------+
+  |   +--<|   index[]    |                                  |         
+  |   |   +--------------+                      GC_obj_map: v              
+  |   |   |              |              from      / +-+-+-----+-+-+-+-+  --- 
+  v   |   |              |              GC_add   < 0| | |     | | | | |   ^  
+ ---  |   +--------------+             _map_entry \ +-+-+-----+-+-+-+-+   |  
+      |   |   asc_link   |                          +-+-+-----+-+-+-+-+ MAXOBJSZ
+      |   +--------------+                      +-->| | |  j  | | | | |  +1   
+      |   |     key      |                      |   +-+-+-----+-+-+-+-+   |  
+      |   +--------------+                      |   +-+-+-----+-+-+-+-+   | 
+      |   |  hash_link   |                      |   | | |     | | | | |   v 
+      |   +--------------+                      |   +-+-+-----+-+-+-+-+  ---
+      |                                         |   |<--MAX_OFFSET--->|   
+      |                                         |         (bytes)
+HDR(p)| GC_find_header(p)                       |   |<--MAP_ENTRIES-->| 
+      |                           \ from        |    =HBLKSIZE/WORDSZ   
+      |    (hdr) (struct hblkhdr) / alloc_hdr() |    (1024 on Alpha)
+      +-->+----------------------+              |    (8/16 bits each)
+GET_HDR(p)| word   hb_sz (words) |              |          
+          +----------------------+              |     
+          | struct hblk *hb_next |              |
+          +----------------------+              |       
+          |mark_proc hb_mark_proc|              |
+          +----------------------+              |
+          | char * hb_map        |>-------------+
+          +----------------------+           
+          | ushort hb_obj_kind   |           
+          +----------------------+           
+          |   hb_last_reclaimed  |           
+ ---      +----------------------+                
+  ^       |                      |
+ MARK_BITS|       hb_marks[]     | *if hdr is free, hb_sz + DISCARD_WORDS
+_SZ(words)|                      |  is the size of a heap chunk (struct hblk)
+  v       |                      |  of at least MININCR*HBLKSIZE bytes (below),
+ ---      +----------------------+  otherwise, size of each object in chunk.
+
+Dynamic data structures above are interleaved throughout the heap in blocks of 
+size MININCR * HBLKSIZE bytes as done by gc_scratch_alloc which cannot be
+freed; free lists are used (e.g. alloc_hdr).  HBLK's below are collected.
+
+             (struct hblk)      
+ ---      +----------------------+ < HBLKSIZE ---         ---          DISCARD_
+  ^       |garbage[DISCARD_WORDS]|   aligned   ^           ^ HDR_BYTES WORDS
+  |       |                      |             |           v (bytes)   (words)
+  |       +-----hb_body----------+ < WORDSZ    |          ---   ---   
+  |       |                      |   aligned   |           ^     ^
+  |       |      Object 0        |             |           hb_sz |
+  |       |                      |           i |(word-    (words)|
+  |       |                      |      (bytes)|aligned)   v     |
+  |       + - - - - - - - - - - -+ ---         |          ---    |
+  |       |                      |  ^          |           ^     |
+  n *     |                      |  j (words)  |          hb_sz BODY_SZ 
+ HBLKSIZE |      Object 1        |  v          v           |   (words)
+ (bytes)  |                      |---------------          v   MAX_OFFSET
+  |       + - - - - - - - - - - -+                        ---  (bytes)
+  |       |                      | !All_INTERIOR_PTRS      ^     |
+  |       |                      | sets j only for       hb_sz   |
+  |       |      Object N        | valid object offsets.   |     |
+  v       |                      | All objects WORDSZ      v     v
+ ---      +----------------------+ aligned.               ---   ---
+
+DISCARD_WORDS is normally zero.  Indeed the collector has not been tested
+with another value in ages.
+</pre>
+</body>
diff --git a/boehm-gc/gcname.c b/boehm-gc/gcname.c
new file mode 100644 (file)
index 0000000..e2119d7
--- /dev/null
@@ -0,0 +1,13 @@
+#include <stdio.h>
+#include "version.h"
+
+int main()
+{
+    if (GC_ALPHA_VERSION == GC_NOT_ALPHA) {
+       printf("gc%d.%d", GC_VERSION_MAJOR, GC_VERSION_MINOR);
+    } else {
+       printf("gc%d.%dalpha%d", GC_VERSION_MAJOR,
+                                GC_VERSION_MINOR, GC_ALPHA_VERSION);
+    }
+    return 0;
+}
diff --git a/boehm-gc/install-sh b/boehm-gc/install-sh
new file mode 100755 (executable)
index 0000000..e9de238
--- /dev/null
@@ -0,0 +1,251 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+       -c) instcmd="$cpprog"
+           shift
+           continue;;
+
+       -d) dir_arg=true
+           shift
+           continue;;
+
+       -m) chmodcmd="$chmodprog $2"
+           shift
+           shift
+           continue;;
+
+       -o) chowncmd="$chownprog $2"
+           shift
+           shift
+           continue;;
+
+       -g) chgrpcmd="$chgrpprog $2"
+           shift
+           shift
+           continue;;
+
+       -s) stripcmd="$stripprog"
+           shift
+           continue;;
+
+       -t=*) transformarg=`echo $1 | sed 's/-t=//'`
+           shift
+           continue;;
+
+       -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+           shift
+           continue;;
+
+       *)  if [ x"$src" = x ]
+           then
+               src=$1
+           else
+               # this colon is to work around a 386BSD /bin/sh bug
+               :
+               dst=$1
+           fi
+           shift
+           continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+       echo "install:  no input file specified"
+       exit 1
+else
+       true
+fi
+
+if [ x"$dir_arg" != x ]; then
+       dst=$src
+       src=""
+       
+       if [ -d $dst ]; then
+               instcmd=:
+               chmodcmd=""
+       else
+               instcmd=mkdir
+       fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+       if [ -f $src -o -d $src ]
+       then
+               true
+       else
+               echo "install:  $src does not exist"
+               exit 1
+       fi
+       
+       if [ x"$dst" = x ]
+       then
+               echo "install:  no destination specified"
+               exit 1
+       else
+               true
+       fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+       if [ -d $dst ]
+       then
+               dst="$dst"/`basename $src`
+       else
+               true
+       fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='   
+'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+       pathcomp="${pathcomp}${1}"
+       shift
+
+       if [ ! -d "${pathcomp}" ] ;
+        then
+               $mkdirprog "${pathcomp}"
+       else
+               true
+       fi
+
+       pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+       $doit $instcmd $dst &&
+
+       if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+       if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+       if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+       if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+       if [ x"$transformarg" = x ] 
+       then
+               dstfile=`basename $dst`
+       else
+               dstfile=`basename $dst $transformbasename | 
+                       sed $transformarg`$transformbasename
+       fi
+
+# don't allow the sed command to completely eliminate the filename
+
+       if [ x"$dstfile" = x ] 
+       then
+               dstfile=`basename $dst`
+       else
+               true
+       fi
+
+# Make a temp file name in the proper directory.
+
+       dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+       $doit $instcmd $src $dsttmp &&
+
+       trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+       if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+       if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+       if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+       if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+
+# Now rename the file to the real destination.
+
+       $doit $rmcmd -f $dstdir/$dstfile &&
+       $doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0
diff --git a/boehm-gc/libtool.m4 b/boehm-gc/libtool.m4
new file mode 100644 (file)
index 0000000..c857149
--- /dev/null
@@ -0,0 +1,435 @@
+## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
+## Copyright (C) 1996-1999 Free Software Foundation, Inc.
+## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful, but
+## WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+##
+## As a special exception to the GNU General Public License, if you
+## distribute this file as part of a program that contains a
+## configuration script generated by Autoconf, you may include it under
+## the same distribution terms that you use for the rest of that program.
+
+# serial 40 AC_PROG_LIBTOOL
+AC_DEFUN(AC_PROG_LIBTOOL,
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+# Save cache, so that ltconfig can load it
+AC_CACHE_SAVE
+
+# Actually configure libtool.  ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Reload cache, that may have been modified by ltconfig
+AC_CACHE_LOAD
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+AC_DEFUN(AC_LIBTOOL_SETUP,
+[AC_PREREQ(2.13)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_RANLIB])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+dnl
+
+case "$target" in
+NONE) lt_target="$host" ;;
+*) lt_target="$target" ;;
+esac
+
+# Check for any special flags to pass to ltconfig.
+#
+# the following will cause an existing older ltconfig to fail, so
+# we ignore this at the expense of the cache file... Checking this 
+# will just take longer ... bummer!
+#libtool_flags="--cache-file=$cache_file"
+#
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+[libtool_flags="$libtool_flags --enable-dlopen"])
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[libtool_flags="$libtool_flags --enable-win32-dll"])
+AC_ARG_ENABLE(libtool-lock,
+  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$lt_target" in
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case "`/usr/bin/file conftest.o`" in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+
+ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+])
+esac
+])
+
+# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+
+# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+
+# AC_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN(AC_ENABLE_SHARED, [dnl
+define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+  enable_shared=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_shared=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)])
+
+# AC_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN(AC_ENABLE_STATIC, [dnl
+define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+  enable_static=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_static=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+])
+
+# AC_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)])
+
+
+# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(fast-install,
+changequote(<<, >>)dnl
+<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+  enable_fast_install=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_fast_install=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+])
+
+# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)])
+
+# AC_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN(AC_PROG_LD,
+[AC_ARG_WITH(gnu-ld,
+[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$ac_cv_prog_gcc" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by GCC])
+  ac_prog=`($CC -print-prog-name=ld) 2>&5`
+  case "$ac_prog" in
+    # Accept absolute paths.
+changequote(,)dnl
+    [\\/]* | [A-Za-z]:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+changequote([,])dnl
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+       ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(ac_cv_path_LD,
+[if test -z "$LD"; then
+  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      ac_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+       test "$with_gnu_ld" != no && break
+      else
+       test "$with_gnu_ld" != yes && break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  ac_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])
+
+AC_DEFUN(AC_PROG_LD_GNU,
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  ac_cv_prog_gnu_ld=yes
+else
+  ac_cv_prog_gnu_ld=no
+fi])
+])
+
+# AC_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN(AC_PROG_NM,
+[AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(ac_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  ac_cv_path_NM="$NM"
+else
+  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+      # Check to see if the nm accepts a BSD-compat flag.
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+      #   nm: unknown option "B" ignored
+      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+       ac_cv_path_NM="$ac_dir/nm -B"
+       break
+      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+       ac_cv_path_NM="$ac_dir/nm -p"
+       break
+      else
+       ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+       continue # so that we can try to find one that supports BSD flags
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+fi])
+NM="$ac_cv_path_NM"
+AC_MSG_RESULT([$NM])
+])
+
+# AC_CHECK_LIBM - check for math library
+AC_DEFUN(AC_CHECK_LIBM,
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case "$lt_target" in
+*-*-beos* | *-*-cygwin*)
+  # These system don't have libm
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, main, LIBM="-lm")
+  ;;
+esac
+])
+
+# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl convenience library, adds --enable-ltdl-convenience to
+# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  case "$enable_ltdl_convenience" in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+  esac
+  LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
+  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+])
+
+# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+# the libltdl installable library, and adds --enable-ltdl-install to
+# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
+# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
+# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
+# '${top_builddir}/' (note the single quotes!) if your package is not
+# flat, and, if you're not using automake, define top_builddir as
+# appropriate in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, main,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
+  ])
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+    LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
+    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    INCLTDL=
+  fi
+])
+
+dnl old names
+AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
+AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
+AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
+AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
+AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
+
+dnl This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])dnl
diff --git a/boehm-gc/ltconfig b/boehm-gc/ltconfig
new file mode 100755 (executable)
index 0000000..a01334f
--- /dev/null
@@ -0,0 +1,3078 @@
+#! /bin/sh
+
+# ltconfig - Create a system-specific libtool.
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A lot of this script is taken from autoconf-2.10.
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+echo=echo
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec "$SHELL" "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# Find the correct PATH separator.  Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+  UNAME=${UNAME-`uname 2>/dev/null`}
+  case X$UNAME in
+    *-DOS) PATH_SEPARATOR=';' ;;
+    *)     PATH_SEPARATOR=':' ;;
+  esac
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test "X${echo_test_string+set}" != Xset; then
+  # find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+       echo_test_string="`eval $cmd`" &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" != 'X\t' ||
+   test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  IFS="${IFS=  }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+  for dir in $PATH /usr/ucb; do
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+        test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running ltconfig again with it.
+      ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
+    else
+      # Try using printf.
+      echo='printf "%s\n"'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+        test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+       # Cool, printf works
+       :
+      elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
+          test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+       CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
+       export CONFIG_SHELL
+       SHELL="$CONFIG_SHELL"
+       export SHELL
+       echo="$CONFIG_SHELL $0 --fallback-echo"
+      elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
+          test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+       echo="$CONFIG_SHELL $0 --fallback-echo"
+      else
+       # maybe with a smaller string...
+       prev=:
+
+       for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+         if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
+           break
+         fi
+         prev="$cmd"
+       done
+
+       if test "$prev" != 'sed 50q "$0"'; then
+         echo_test_string=`eval $prev`
+         export echo_test_string
+         exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"}
+       else
+         # Oops.  We lost completely, so just stick with echo.
+         echo=echo
+       fi
+      fi
+    fi
+  fi
+fi
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# The name of this program.
+progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
+
+# Constants:
+PROGRAM=ltconfig
+PACKAGE=libtool
+VERSION=1.3.4
+TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)"
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+rm="rm -f"
+
+help="Try \`$progname --help' for more information."
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+enable_shared=yes
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+enable_static=yes
+enable_fast_install=yes
+enable_dlopen=unknown
+enable_win32_dll=no
+ltmain=
+silent=
+srcdir=
+ac_config_guess=
+ac_config_sub=
+host=
+nonopt=
+ofile="$default_ofile"
+verify_host=yes
+with_gcc=no
+with_gnu_ld=no
+need_locks=yes
+ac_ext=c
+objext=o
+libext=a
+exeext=
+cache_file=
+
+old_AR="$AR"
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+old_CPPFLAGS="$CPPFLAGS"
+old_LDFLAGS="$LDFLAGS"
+old_LD="$LD"
+old_LN_S="$LN_S"
+old_LIBS="$LIBS"
+old_NM="$NM"
+old_RANLIB="$RANLIB"
+old_DLLTOOL="$DLLTOOL"
+old_OBJDUMP="$OBJDUMP"
+old_AS="$AS"
+
+# Parse the command line options.
+args=
+prev=
+for option
+do
+  case "$option" in
+  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    eval "$prev=\$option"
+    prev=
+    continue
+  fi
+
+  case "$option" in
+  --help) cat <<EOM
+Usage: $progname [OPTION]... [HOST [LTMAIN]]
+
+Generate a system-specific libtool script.
+
+    --debug                enable verbose shell tracing
+    --disable-shared       do not build shared libraries
+    --disable-static       do not build static libraries
+    --disable-fast-install do not optimize for fast installation
+    --enable-dlopen        enable dlopen support
+    --enable-win32-dll     enable building dlls on win32 hosts
+    --help                 display this help and exit
+    --no-verify            do not verify that HOST is a valid host type
+-o, --output=FILE          specify the output file [default=$default_ofile]
+    --quiet                same as \`--silent'
+    --silent               do not print informational messages
+    --srcdir=DIR           find \`config.guess' in DIR
+    --version              output version information and exit
+    --with-gcc             assume that the GNU C compiler will be used
+    --with-gnu-ld          assume that the C compiler uses the GNU linker
+    --disable-lock         disable file locking
+    --cache-file=FILE      configure cache file
+
+LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
+that provides basic libtool functionality.
+
+HOST is the canonical host system name [default=guessed].
+EOM
+  exit 0
+  ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --disable-shared) enable_shared=no ;;
+
+  --disable-static) enable_static=no ;;
+
+  --disable-fast-install) enable_fast_install=no ;;
+
+  --enable-dlopen) enable_dlopen=yes ;;
+
+  --enable-win32-dll) enable_win32_dll=yes ;;
+
+  --quiet | --silent) silent=yes ;;
+
+  --srcdir) prev=srcdir ;;
+  --srcdir=*) srcdir="$optarg" ;;
+
+  --no-verify) verify_host=no ;;
+
+  --output | -o) prev=ofile ;;
+  --output=*) ofile="$optarg" ;;
+
+  --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;
+
+  --with-gcc) with_gcc=yes ;;
+  --with-gnu-ld) with_gnu_ld=yes ;;
+
+  --disable-lock) need_locks=no ;;
+
+  --cache-file=*) cache_file="$optarg" ;;
+
+  -*)
+    echo "$progname: unrecognized option \`$option'" 1>&2
+    echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    if test -z "$ltmain"; then
+      ltmain="$option"
+    elif test -z "$host"; then
+# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
+#      if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
+#        echo "$progname: warning \`$option' is not a valid host type" 1>&2
+#      fi
+      host="$option"
+    else
+      echo "$progname: too many arguments" 1>&2
+      echo "$help" 1>&2
+      exit 1
+    fi ;;
+  esac
+done
+
+if test -z "$ltmain"; then
+  echo "$progname: you must specify a LTMAIN file" 1>&2
+  echo "$help" 1>&2
+  exit 1
+fi
+
+if test ! -f "$ltmain"; then
+  echo "$progname: \`$ltmain' does not exist" 1>&2
+  echo "$help" 1>&2
+  exit 1
+fi
+
+# Quote any args containing shell metacharacters.
+ltconfig_args=
+for arg
+do
+  case "$arg" in
+  *" "*|*"     "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ltconfig_args="$ltconfig_args '$arg'" ;;
+  *) ltconfig_args="$ltconfig_args $arg" ;;
+  esac
+done
+
+# A relevant subset of AC_INIT.
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 5 compiler messages saved in config.log
+# 6 checking for... messages and results
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>>./config.log
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi
+if test "X${LANG+set}"   = Xset; then LANG=C;   export LANG;   fi
+
+if test -n "$cache_file" && test -r "$cache_file"; then
+  echo "loading cache $cache_file within ltconfig"
+  . $cache_file
+fi
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='       '
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+if test -z "$srcdir"; then
+  # Assume the source directory is the same one as the path to LTMAIN.
+  srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
+  test "$srcdir" = "$ltmain" && srcdir=.
+fi
+
+trap "$rm conftest*; exit 1" 1 2 15
+if test "$verify_host" = yes; then
+  # Check for config.guess and config.sub.
+  ac_aux_dir=
+  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+    if test -f $ac_dir/config.guess; then
+      ac_aux_dir=$ac_dir
+      break
+    fi
+  done
+  if test -z "$ac_aux_dir"; then
+    echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
+    echo "$help" 1>&2
+    exit 1
+  fi
+  ac_config_guess=$ac_aux_dir/config.guess
+  ac_config_sub=$ac_aux_dir/config.sub
+
+  # Make sure we can run config.sub.
+  if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
+  else
+    echo "$progname: cannot run $ac_config_sub" 1>&2
+    echo "$help" 1>&2
+    exit 1
+  fi
+
+  echo $ac_n "checking host system type""... $ac_c" 1>&6
+
+  host_alias=$host
+  case "$host_alias" in
+  "")
+    if host_alias=`$SHELL $ac_config_guess`; then :
+    else
+      echo "$progname: cannot guess host type; you must specify one" 1>&2
+      echo "$help" 1>&2
+      exit 1
+    fi ;;
+  esac
+  host=`$SHELL $ac_config_sub $host_alias`
+  echo "$ac_t$host" 1>&6
+
+  # Make sure the host verified.
+  test -z "$host" && exit 1
+
+elif test -z "$host"; then
+  echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
+  echo "$help" 1>&2
+  exit 1
+else
+  host_alias=$host
+fi
+
+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+case "$host_os" in
+linux-gnu*) ;;
+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+esac
+
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+case "$host_os" in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR cru $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+# Set a sane default for `AR'.
+test -z "$AR" && AR=ar
+
+# Set a sane default for `OBJDUMP'.
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+# If RANLIB is not set, then run the test.
+if test "${RANLIB+set}" != "set"; then
+  result=no
+
+  echo $ac_n "checking for ranlib... $ac_c" 1>&6
+  IFS="${IFS=  }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+  for dir in $PATH; do
+    test -z "$dir" && dir=.
+    if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then
+      RANLIB="ranlib"
+      result="ranlib"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  echo "$ac_t$result" 1>&6
+fi
+
+if test -n "$RANLIB"; then
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+  old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+fi
+
+# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin.
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$AS" && AS=as
+
+# Check to see if we are using GCC.
+if test "$with_gcc" != yes || test -z "$CC"; then
+  # If CC is not set, then try to find GCC or a usable CC.
+  if test -z "$CC"; then
+    echo $ac_n "checking for gcc... $ac_c" 1>&6
+    IFS="${IFS=        }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    for dir in $PATH; do
+      test -z "$dir" && dir=.
+      if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then
+       CC="gcc"
+       break
+      fi
+    done
+    IFS="$save_ifs"
+
+    if test -n "$CC"; then
+      echo "$ac_t$CC" 1>&6
+    else
+      echo "$ac_t"no 1>&6
+    fi
+  fi
+
+  # Not "gcc", so try "cc", rejecting "/usr/ucb/cc".
+  if test -z "$CC"; then
+    echo $ac_n "checking for cc... $ac_c" 1>&6
+    IFS="${IFS=        }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    cc_rejected=no
+    for dir in $PATH; do
+      test -z "$dir" && dir=.
+      if test -f $dir/cc || test -f $dir/cc$ac_exeext; then
+       if test "$dir/cc" = "/usr/ucb/cc"; then
+         cc_rejected=yes
+         continue
+       fi
+       CC="cc"
+       break
+      fi
+    done
+    IFS="$save_ifs"
+    if test $cc_rejected = yes; then
+      # We found a bogon in the path, so make sure we never use it.
+      set dummy $CC
+      shift
+      if test $# -gt 0; then
+       # We chose a different compiler from the bogus one.
+       # However, it has the same name, so the bogon will be chosen
+       # first if we set CC to just the name; use the full file name.
+       shift
+       set dummy "$dir/cc" "$@"
+       shift
+       CC="$@"
+      fi
+    fi
+
+    if test -n "$CC"; then
+      echo "$ac_t$CC" 1>&6
+    else
+      echo "$ac_t"no 1>&6
+    fi
+
+    if test -z "$CC"; then
+      echo "$progname: error: no acceptable cc found in \$PATH" 1>&2
+      exit 1
+    fi
+  fi
+
+  # Now see if the compiler is really GCC.
+  with_gcc=no
+  echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
+  echo "$progname:581: checking whether we are using GNU C" >&5
+
+  $rm conftest.c
+  cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+  if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:589: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+    with_gcc=yes
+  fi
+  $rm conftest.c
+  echo "$ac_t$with_gcc" 1>&6
+fi
+
+# Allow CC to be a program name with arguments.
+set dummy $CC
+compiler="$2"
+
+echo $ac_n "checking for object suffix... $ac_c" 1>&6
+$rm conftest*
+echo 'int i = 1;' > conftest.c
+echo "$progname:603: checking for object suffix" >& 5
+if { (eval echo $progname:604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
+  # Append any warnings to the config.log.
+  cat conftest.err 1>&5
+
+  for ac_file in conftest.*; do
+    case $ac_file in
+    *.c) ;;
+    *) objext=`echo $ac_file | sed -e s/conftest.//` ;;
+    esac
+  done
+else
+  cat conftest.err 1>&5
+  echo "$progname: failed program was:" >&5
+  cat conftest.c >&5
+fi
+$rm conftest*
+echo "$ac_t$objext" 1>&6
+
+echo $ac_n "checking for executable suffix... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_cv_exeext="no"
+  $rm conftest*
+  echo 'main () { return 0; }' > conftest.c
+  echo "$progname:629: checking for executable suffix" >& 5
+  if { (eval echo $progname:630: \"$ac_link\") 1>&5; (eval $ac_link) 2>conftest.err; }; then
+    # Append any warnings to the config.log.
+    cat conftest.err 1>&5
+
+    for ac_file in conftest.*; do
+      case $ac_file in
+      *.c | *.err | *.$objext ) ;;
+      *) ac_cv_exeext=.`echo $ac_file | sed -e s/conftest.//` ;;
+      esac
+    done
+  else
+    cat conftest.err 1>&5
+    echo "$progname: failed program was:" >&5
+    cat conftest.c >&5
+  fi
+  $rm conftest*
+fi
+if test "X$ac_cv_exeext" = Xno; then
+  exeext=""
+else
+  exeext="$ac_cv_exeext"
+fi
+echo "$ac_t$ac_cv_exeext" 1>&6
+
+echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
+pic_flag=
+special_shlib_compile_flags=
+wl=
+link_static_flag=
+no_builtin_flag=
+
+if test "$with_gcc" = yes; then
+  wl='-Wl,'
+  link_static_flag='-static'
+
+  case "$host_os" in
+  beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+    # PIC is the default for these OSes.
+    ;;
+  aix*)
+    # Below there is a dirty hack to force normal static linking with -ldl
+    # The problem is because libdl dynamically linked with both libc and
+    # libC (AIX C++ library), which obviously doesn't included in libraries
+    # list by gcc. This cause undefined symbols with -static flags.
+    # This hack allows C programs to be linked with "-static -ldl", but
+    # we not sure about C++ programs.
+    link_static_flag="$link_static_flag ${wl}-lC"
+    ;;
+  cygwin* | mingw* | os2*)
+    # We can build DLLs from non-PIC.
+    ;;
+  amigaos*)
+    # FIXME: we need at least 68020 code to build shared libraries, but
+    # adding the `-m68020' flag to GCC prevents building anything better,
+    # like `-m68040'.
+    pic_flag='-m68020 -resident32 -malways-restore-a4'
+    ;;
+  sysv4*MP*)
+    if test -d /usr/nec; then
+       pic_flag=-Kconform_pic
+    fi
+    ;;
+  *)
+    pic_flag='-fPIC'
+    ;;
+  esac
+else
+  # PORTME Check for PIC flags for the system compiler.
+  case "$host_os" in
+  aix3* | aix4*)
+    # All AIX code is PIC.
+    link_static_flag='-bnso -bI:/lib/syscalls.exp'
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    # Is there a better link_static_flag that works with the bundled CC?
+    wl='-Wl,'
+    link_static_flag="${wl}-a ${wl}archive"
+    pic_flag='+Z'
+    ;;
+
+  irix5* | irix6*)
+    wl='-Wl,'
+    link_static_flag='-non_shared'
+    # PIC (with -KPIC) is the default.
+    ;;
+
+  cygwin* | mingw* | os2*)
+    # We can build DLLs from non-PIC.
+    ;;
+
+  osf3* | osf4* | osf5*)
+    # All OSF/1 code is PIC.
+    wl='-Wl,'
+    link_static_flag='-non_shared'
+    ;;
+
+  sco3.2v5*)
+    pic_flag='-Kpic'
+    link_static_flag='-dn'
+    special_shlib_compile_flags='-belf'
+    ;;
+
+  solaris*)
+    pic_flag='-KPIC'
+    link_static_flag='-Bstatic'
+    wl='-Wl,'
+    ;;
+
+  sunos4*)
+    pic_flag='-PIC'
+    link_static_flag='-Bstatic'
+    wl='-Qoption ld '
+    ;;
+
+  sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    pic_flag='-KPIC'
+    link_static_flag='-Bstatic'
+    wl='-Wl,'
+    ;;
+
+  uts4*)
+    pic_flag='-pic'
+    link_static_flag='-Bstatic'
+    ;;
+  sysv4*MP*)
+    if test -d /usr/nec ;then
+      pic_flag='-Kconform_pic'
+      link_static_flag='-Bstatic'
+    fi
+    ;;
+  *)
+    can_build_shared=no
+    ;;
+  esac
+fi
+
+if test -n "$pic_flag"; then
+  echo "$ac_t$pic_flag" 1>&6
+
+  # Check to make sure the pic_flag actually works.
+  echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6
+  $rm conftest*
+  echo "int some_variable = 0;" > conftest.c
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS $pic_flag -DPIC"
+  echo "$progname:776: checking if $compiler PIC flag $pic_flag works" >&5
+  if { (eval echo $progname:777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
+    # Append any warnings to the config.log.
+    cat conftest.err 1>&5
+    
+    case "$host_os" in
+    hpux9* | hpux10* | hpux11*)
+      # On HP-UX, both CC and GCC only warn that PIC is supported... then they
+      # create non-PIC objects.  So, if there were any warnings, we assume that
+      # PIC is not supported.
+      if test -s conftest.err; then
+       echo "$ac_t"no 1>&6
+       can_build_shared=no
+       pic_flag=
+      else
+       echo "$ac_t"yes 1>&6
+       pic_flag=" $pic_flag"
+      fi
+      ;;
+    *)
+      echo "$ac_t"yes 1>&6
+      pic_flag=" $pic_flag"
+      ;;
+    esac
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    can_build_shared=no
+    pic_flag=
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+else
+  echo "$ac_t"none 1>&6
+fi
+
+# Check to see if options -o and -c are simultaneously supported by compiler
+echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
+$rm conftest*
+echo "int some_variable = 0;" > conftest.c
+mkdir out
+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+# that will create temporary files in the current directory regardless of
+# the output directory.  Thus, making CWD read-only will cause this test
+# to fail, enabling locking or at least warning the user not to do parallel
+# builds.
+chmod -w .
+save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -o out/conftest2.o"
+echo "$progname:829: checking if $compiler supports -c -o file.o" >&5
+if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then
+
+  # The compiler can only warn and ignore the option if not recognized
+  # So say no if there are warnings
+    if test -s out/conftest.err; then
+      echo "$ac_t"no 1>&6
+      compiler_c_o=no
+    else
+      echo "$ac_t"yes 1>&6
+      compiler_c_o=yes
+    fi
+else
+  # Append any errors to the config.log.
+  cat out/conftest.err 1>&5
+  compiler_c_o=no
+  echo "$ac_t"no 1>&6
+fi
+CFLAGS="$save_CFLAGS"
+chmod u+w .
+$rm conftest* out/*
+rmdir out
+cd ..
+rmdir conftest
+$rm -r conftest 2>/dev/null
+
+if test x"$compiler_c_o" = x"yes"; then
+  # Check to see if we can write to a .lo
+  echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6
+  $rm conftest*
+  echo "int some_variable = 0;" > conftest.c
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -c -o conftest.lo"
+  echo "$progname:862: checking if $compiler supports -c -o file.lo" >&5
+if { (eval echo $progname:863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then
+
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+      if test -s conftest.err; then
+       echo "$ac_t"no 1>&6
+       compiler_o_lo=no
+      else
+       echo "$ac_t"yes 1>&6
+       compiler_o_lo=yes
+      fi
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    compiler_o_lo=no
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+else
+  compiler_o_lo=no
+fi
+
+# Check to see if we can do hard links to lock some files if needed
+hard_links="nottested"
+if test "$compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$ac_t$hard_links" 1>&6
+  $rm conftest*
+  if test "$hard_links" = no; then
+    echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+if test "$with_gcc" = yes; then
+  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
+  $rm conftest*
+  echo "int some_variable = 0;" > conftest.c
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c"
+  echo "$progname:914: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+  if { (eval echo $progname:915: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
+
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+      if test -s conftest.err; then
+       echo "$ac_t"no 1>&6
+       compiler_rtti_exceptions=no
+      else
+       echo "$ac_t"yes 1>&6
+       compiler_rtti_exceptions=yes
+      fi
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    compiler_rtti_exceptions=no
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+
+  if test "$compiler_rtti_exceptions" = "yes"; then
+    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+  else
+    no_builtin_flag=' -fno-builtin'
+  fi
+  
+fi
+
+# Check for any special shared library compilation flags.
+if test -n "$special_shlib_compile_flags"; then
+  echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2
+  if echo "$old_CC $old_CFLAGS " | egrep -e "[         ]$special_shlib_compile_flags[  ]" >/dev/null; then :
+  else
+    echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2
+    can_build_shared=no
+  fi
+fi
+
+echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6
+$rm conftest*
+echo 'main(){return(0);}' > conftest.c
+save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS $link_static_flag"
+echo "$progname:958: checking if $compiler static flag $link_static_flag works" >&5
+if { (eval echo $progname:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+  echo "$ac_t$link_static_flag" 1>&6
+else
+  echo "$ac_t"none 1>&6
+  link_static_flag=
+fi
+LDFLAGS="$save_LDFLAGS"
+$rm conftest*
+
+if test -z "$LN_S"; then
+  # Check to see if we can use ln -s, or we need hard links.
+  echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
+  $rm conftest.dat
+  if ln -s X conftest.dat 2>/dev/null; then
+    $rm conftest.dat
+    LN_S="ln -s"
+  else
+    LN_S=ln
+  fi
+  if test "$LN_S" = "ln -s"; then
+    echo "$ac_t"yes 1>&6
+  else
+    echo "$ac_t"no 1>&6
+  fi
+fi
+
+# Make sure LD is an absolute path.
+if test -z "$LD"; then
+  ac_prog=ld
+  if test "$with_gcc" = yes; then
+    # Check if gcc -print-prog-name=ld gives a path.
+    echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
+    echo "$progname:991: checking for ld used by GCC" >&5
+    ac_prog=`($CC -print-prog-name=ld) 2>&5`
+    case "$ac_prog" in
+    # Accept absolute paths.
+    [\\/]* | [A-Za-z]:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+       ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+    "")
+      # If it fails, then pretend we are not using GCC.
+      ac_prog=ld
+      ;;
+    *)
+      # If it is relative, then search for the first ld in PATH.
+      with_gnu_ld=unknown
+      ;;
+    esac
+  elif test "$with_gnu_ld" = yes; then
+    echo $ac_n "checking for GNU ld... $ac_c" 1>&6
+    echo "$progname:1015: checking for GNU ld" >&5
+  else
+    echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+    echo "$progname:1018: checking for non-GNU ld" >&5
+  fi
+
+  if test -z "$LD"; then
+    IFS="${IFS=        }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    for ac_dir in $PATH; do
+      test -z "$ac_dir" && ac_dir=.
+      if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+       LD="$ac_dir/$ac_prog"
+       # Check to see if the program is GNU ld.  I'd rather use --version,
+       # but apparently some GNU ld's only accept -v.
+       # Break only if it was the GNU/non-GNU ld that we prefer.
+       if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+         test "$with_gnu_ld" != no && break
+       else
+         test "$with_gnu_ld" != yes && break
+       fi
+      fi
+    done
+    IFS="$ac_save_ifs"
+  fi
+
+  if test -n "$LD"; then
+    echo "$ac_t$LD" 1>&6
+  else
+    echo "$ac_t"no 1>&6
+  fi
+
+  if test -z "$LD"; then
+    echo "$progname: error: no acceptable ld found in \$PATH" 1>&2
+    exit 1
+  fi
+fi
+
+# Check to see if it really is or is not GNU ld.
+echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6
+# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+echo "$ac_t$with_gnu_ld" 1>&6
+
+# See if the linker supports building shared libraries.
+echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
+
+allow_undefined_flag=
+no_undefined_flag=
+need_lib_prefix=unknown
+need_version=unknown
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+archive_cmds=
+archive_expsym_cmds=
+old_archive_from_new_cmds=
+export_dynamic_flag_spec=
+whole_archive_flag_spec=
+thread_safe_flag_spec=
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+hardcode_shlibpath_var=unsupported
+runpath_var=
+always_export_symbols=no
+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+include_expsyms=
+# exclude_expsyms can be an egrep regular expression of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced.  Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+
+case "$host_os" in
+cygwin* | mingw*)
+  # FIXME: the MSVC++ port hasn't been tested in a loooong time
+  # When not using gcc, we currently assume that we are using
+  # Microsoft Visual C++.
+  if test "$with_gcc" != yes; then
+    with_gnu_ld=no
+  fi
+  ;;
+
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # If archive_cmds runs LD, not CC, wlarc should be empty
+  wlarc='${wl}'
+
+  # See if GNU ld supports shared libraries.
+  case "$host_os" in
+  aix3* | aix4*)
+    # On AIX, the GNU linker is very broken
+    ld_shlibs=no
+    cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+
+    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+    # that the semantics of dynamic libraries on AmigaOS, at least up
+    # to version 4, is to share data among multiple programs linked
+    # with the same dynamic library.  Since this doesn't match the
+    # behavior of shared libraries on other platforms, we can use
+    # them.
+    ld_shlibs=no
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  cygwin* | mingw*)
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec='-L$libdir'
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+
+    # Extract the symbol export list from an `--export-all' def file,
+    # then regenerate the def file from the symbol export list, so that
+    # the compiled dll only exports the symbol export list.
+    export_symbols_cmds='test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
+      $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def  $objdir/$soname-ltdll.$objext $libobjs $convenience~
+      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols'
+
+    archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~
+      _lt_hint=1;
+      for symbol in `cat $export_symbols`; do
+       echo "  \$symbol @ \$_lt_hint ; " >> $objdir/$soname-def;
+       _lt_hint=`expr 1 + \$_lt_hint`;
+      done~
+      test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
+      $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
+      $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
+      $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts'
+
+      old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a' 
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib'
+      # can we support soname and/or expsyms with a.out? -oliva
+    fi
+    ;;
+
+  solaris* | sysv5*)
+    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+      ld_shlibs=no
+      cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;      
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts'
+    wlarc=
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+  esac
+
+  if test "$ld_shlibs" = yes; then
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    case $host_os in
+    cygwin* | mingw*)
+      # dlltool doesn't understand --whole-archive et. al.
+      whole_archive_flag_spec=
+      ;;
+    *)
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+        whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+        whole_archive_flag_spec=
+      fi
+      ;;
+    esac
+  fi
+else
+  # PORTME fill in a description of your system's linker (not GNU ld)
+  case "$host_os" in
+  aix3*)
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+    archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname'
+    # Note: this linker hardcodes the directories in LIBPATH if there
+    # are no directories specified by -L.
+    hardcode_minus_L=yes
+    if test "$with_gcc" = yes && test -z "$link_static_flag"; then
+      # Neither direct hardcoding nor static linking is supported with a
+      # broken collect2.
+      hardcode_direct=unsupported
+    fi
+    ;;
+
+  aix4*)
+    hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib'
+    hardcode_libdir_separator=':'
+    if test "$with_gcc" = yes; then
+      collect2name=`${CC} -print-prog-name=collect2`
+      if test -f "$collect2name" && \
+        strings "$collect2name" | grep resolve_lib_name >/dev/null
+      then
+       # We have reworked collect2
+       hardcode_direct=yes
+      else
+       # We have old collect2
+       hardcode_direct=unsupported
+       # It fails to find uninstalled libraries when the uninstalled
+       # path is not listed in the libpath.  Setting hardcode_minus_L
+       # to unsupported forces relinking
+       hardcode_minus_L=yes
+       hardcode_libdir_flag_spec='-L$libdir'
+       hardcode_libdir_separator=
+      fi
+      shared_flag='-shared'
+    else
+      shared_flag='${wl}-bM:SRE'
+      hardcode_direct=yes
+    fi
+    allow_undefined_flag=' ${wl}-berok'
+    archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}'
+    archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}'
+    case "$host_os" in aix4.[01]|aix4.[01].*)
+      # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on
+      always_export_symbols=yes ;;
+    esac
+   ;;
+
+  amigaos*)
+    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    # see comment about different semantics on the GNU ld section
+    ld_shlibs=no
+    ;;
+
+  cygwin* | mingw*)
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec=' '
+    allow_undefined_flag=unsupported
+    # Tell ltmain to make .lib files, not .a files.
+    libext=lib
+    # FIXME: Setting linknames here is a bad hack.
+    archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+    # The linker will automatically build a .lib file if we build a DLL.
+    old_archive_from_new_cmds='true'
+    # FIXME: Should let the user specify the lib program.
+    old_archive_cmds='lib /OUT:$oldlib$oldobjs'
+    fix_srcfile_path='`cygpath -w $srcfile`'
+    ;;
+
+  freebsd1*)
+    ld_shlibs=no
+    ;;
+
+  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+  # support.  Future versions do this automatically, but an explicit c++rt0.o
+  # does not break anything, and helps significantly (at the cost of a little
+  # extra space).
+  freebsd2.2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+  freebsd2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+  freebsd*)
+    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    case "$host_os" in
+    hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;;
+    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;;
+    esac
+    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_direct=yes
+    hardcode_minus_L=yes # Not in the search PATH, but as the default
+                        # location of the library.
+    export_dynamic_flag_spec='${wl}-E'
+    ;;
+
+  irix5* | irix6*)
+    if test "$with_gcc" = yes; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'  # a.out
+    else
+      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts'      # ELF
+    fi
+    hardcode_libdir_flag_spec='${wl}-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  openbsd*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  os2*)
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    allow_undefined_flag=unsupported
+    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def'
+    old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
+    ;;
+
+  osf3*)
+    if test "$with_gcc" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  osf4* | osf5*)  # As osf3* with the addition of the -msym flag
+    if test "$with_gcc" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  sco3.2v5*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_shlibpath_var=no
+    runpath_var=LD_RUN_PATH
+    hardcode_runpath_var=yes
+    ;;
+
+  solaris*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+               $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_shlibpath_var=no
+    case "$host_os" in
+    solaris2.[0-5] | solaris2.[0-5].*) ;;
+    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+    esac
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    hardcode_direct=no #Motorola manual says yes, but my tests say they lie 
+    ;;  
+
+  sysv4.3*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_shlibpath_var=no
+    export_dynamic_flag_spec='-Bexport'
+    ;;
+
+  sysv5*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+               $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
+    hardcode_libdir_flag_spec=
+    hardcode_shlibpath_var=no
+    runpath_var='LD_RUN_PATH'
+    ;;
+
+  uts4*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  dgux*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4*MP*)
+    if test -d /usr/nec; then
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+      hardcode_shlibpath_var=no
+      runpath_var=LD_RUN_PATH
+      hardcode_runpath_var=yes
+      ld_shlibs=yes
+    fi
+    ;;
+
+  sysv4.2uw2*)
+    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts'
+    hardcode_direct=yes
+    hardcode_minus_L=no
+    hardcode_shlibpath_var=no
+    hardcode_runpath_var=yes
+    runpath_var=LD_RUN_PATH
+    ;;
+
+  unixware7*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    ld_shlibs=no
+    ;;
+  esac
+fi
+echo "$ac_t$ld_shlibs" 1>&6
+test "$ld_shlibs" = no && can_build_shared=no
+
+if test -z "$NM"; then
+  echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
+  case "$NM" in
+  [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path.
+  *)
+    IFS="${IFS=        }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do
+      test -z "$ac_dir" && ac_dir=.
+      if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then
+       # Check to see if the nm accepts a BSD-compat flag.
+       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+       #   nm: unknown option "B" ignored
+       if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+         NM="$ac_dir/nm -B"
+         break
+       elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+         NM="$ac_dir/nm -p"
+         break
+       else
+         NM=${NM="$ac_dir/nm"} # keep the first match, but
+         continue # so that we can try to find one that supports BSD flags
+       fi
+      fi
+    done
+    IFS="$ac_save_ifs"
+    test -z "$NM" && NM=nm
+    ;;
+  esac
+  echo "$ac_t$NM" 1>&6
+fi
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Define system-specific variables.
+case "$host_os" in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+  ;;
+irix*)
+  symcode='[BCDEGRST]'
+  ;;
+solaris*)
+  symcode='[BDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+  symcode='[ABCDGISTW]'
+fi
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Write the raw and C identifiers.
+  global_symbol_pipe="sed -n -e 's/^.*[        ]\($symcode\)[  ][      ]*\($ac_symprfx\)$sympat$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+  $rm conftest*
+  cat > conftest.c <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  echo "$progname:1635: checking if global_symbol_pipe works" >&5
+  if { (eval echo $progname:1636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { echo "$progname:1639: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
+
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+       mv -f "$nlist"T "$nlist"
+      else
+       rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+       if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+         cat <<EOF > conftest.c
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+         # Now generate the symbol file.
+         eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c'
+
+         cat <<EOF >> conftest.c
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+         sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c
+         cat <<\EOF >> conftest.c
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+         # Now try linking the two files.
+         mv conftest.$objext conftstm.$objext
+         save_LIBS="$LIBS"
+         save_CFLAGS="$CFLAGS"
+         LIBS="conftstm.$objext"
+         CFLAGS="$CFLAGS$no_builtin_flag"
+         if { (eval echo $progname:1691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+           pipe_works=yes
+         else
+           echo "$progname: failed program was:" >&5
+           cat conftest.c >&5
+         fi
+         LIBS="$save_LIBS"
+       else
+         echo "cannot find nm_test_func in $nlist" >&5
+       fi
+      else
+       echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.c >&5
+  fi
+  $rm conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    global_symbol_pipe=
+  fi
+done
+if test "$pipe_works" = yes; then
+  echo "${ac_t}ok" 1>&6
+else
+  echo "${ac_t}failed" 1>&6
+fi
+
+if test -z "$global_symbol_pipe"; then
+  global_symbol_to_cdecl=
+fi
+
+# Check hardcoding attributes.
+echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var"; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$hardcode_shlibpath_var" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+echo "$ac_t$hardcode_action" 1>&6
+
+
+reload_flag=
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6
+# PORTME Some linkers may need a different reload flag.
+reload_flag='-r'
+echo "$ac_t$reload_flag" 1>&6
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+# PORTME Fill in your ld.so characteristics
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+file_magic_cmd=
+file_magic_test_file=
+deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
+case "$host_os" in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}.so$major'
+  ;;
+
+aix4*)
+  version_type=linux
+  # AIX has no versioning support, so currently we can not hardcode correct
+  # soname into executable. Probably we can add versioning support to
+  # collect2, so additional links can be useful in future.
+  # We preserve .a as extension for shared libraries though AIX4.2
+  # and later linker supports .so
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a'
+  shlibpath_var=LIBPATH
+  deplibs_check_method=pass_all
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}.so'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  deplibs_check_method=pass_all
+  lt_cv_dlopen="load_add_on"
+  lt_cv_dlopen_libs=
+  lt_cv_dlopen_self=yes
+  ;;
+
+bsdi4*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=/shlib/libc.so
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  export_dynamic_flag_spec=-rdynamic
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw*)
+  version_type=windows
+  need_version=no
+  need_lib_prefix=no
+  if test "$with_gcc" = yes; then
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a'
+  else
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
+  fi
+  dynamic_linker='Win32 ld.exe'
+  deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  file_magic_cmd='${OBJDUMP} -f'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  lt_cv_dlopen="LoadLibrary"
+  lt_cv_dlopen_libs=
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+  
+freebsd*)
+  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+  version_type=freebsd-$objformat
+  case "$version_type" in
+    freebsd-elf*)
+      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+      file_magic_cmd=/usr/bin/file
+      file_magic_test_file=`echo /usr/lib/libc.so*`
+      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      deplibs_check_method=unknown
+      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case "$host_os" in
+  freebsd2* | freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  *) # from 3.2 on
+    shlibpath_overrides_runpath=no
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  dynamic_linker="$host_os dld.sl"
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  shlibpath_var=SHLIB_PATH
+  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+  soname_spec='${libname}${release}.sl$major'
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+irix5* | irix6*)
+  version_type=irix
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}.so.$major'
+  library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so'
+  case "$host_os" in
+  irix5*)
+    libsuff= shlibsuff=
+    # this will be overridden with pass_all, but let us keep it just in case
+    deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+    ;;
+  *)
+    case "$LD" in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  deplibs_check_method='pass_all'
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+
+  if test -f /lib/ld.so.1; then
+    dynamic_linker='GNU ld.so'
+  else
+    # Only the GNU ld.so supports shared libraries on MkLinux.
+    case "$host_cpu" in
+    powerpc*) dynamic_linker=no ;;
+    *) dynamic_linker='Linux ld.so' ;;
+    esac
+  fi
+  ;;
+
+netbsd*)
+  version_type=sunos
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
+    soname_spec='${libname}${release}.so$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+openbsd*)
+  version_type=sunos
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+    need_version=no
+  fi
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+os2*)
+  libname_spec='$name'
+  need_lib_prefix=no
+  library_names_spec='$libname.dll $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_version=no
+  soname_spec='${libname}${release}.so'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  # this will be overridden with pass_all, but let us keep it just in case
+  deplibs_check_method='file_magic COFF format alpha shared library'
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=/shlib/libc.so
+  deplibs_check_method='pass_all'
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+sco3.2v5*)
+  version_type=osf
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib"
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=/lib/libc.so
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case "$host_vendor" in
+    ncr)
+      deplibs_check_method='pass_all'
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+      file_magic_cmd=/usr/bin/file
+      file_magic_test_file=`echo /usr/lib/libc.so*`
+      ;;
+  esac
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
+    soname_spec='$libname.so.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$ac_t$dynamic_linker" 1>&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+# Report the final consequences.
+echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
+
+# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
+# configure.in, otherwise build static only libraries.
+case "$host_os" in
+cygwin* | mingw* | os2*)
+  if test x$can_build_shared = xyes; then
+    test x$enable_win32_dll = xno && can_build_shared=no
+    echo "checking if package supports dlls... $can_build_shared" 1>&6
+  fi
+;;
+esac
+
+if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then
+  case "$deplibs_check_method" in
+  "file_magic "*)
+    file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+    if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+       egrep "$file_magic_regex" > /dev/null; then
+      :
+    else
+      cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+    fi ;;
+  esac
+fi
+
+echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4*)
+  test "$enable_shared" = yes && enable_static=no
+  ;;
+esac
+
+echo "$ac_t$enable_shared" 1>&6
+
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+
+echo "checking whether to build static libraries... $enable_static" 1>&6
+
+if test "$hardcode_action" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+echo $ac_n "checking for objdir... $ac_c" 1>&6
+rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+echo "$ac_t$objdir" 1>&6
+
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
+  lt_cv_dlopen=no lt_cv_dlopen_libs=
+echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+echo "$progname:2212: checking for dlopen in -ldl" >&5
+ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldl  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2220 "ltconfig"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo $progname:2233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dlopen""... $ac_c" 1>&6
+echo "$progname:2252: checking for dlopen" >&5
+if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2257 "ltconfig"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char dlopen(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+dlopen();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:2282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_dlopen=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_dlopen=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dlopen"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
+echo "$progname:2299: checking for dld_link in -ldld" >&5
+ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldld  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2307 "ltconfig"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link();
+
+int main() {
+dld_link()
+; return 0; }
+EOF
+if { (eval echo $progname:2320: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load""... $ac_c" 1>&6
+echo "$progname:2339: checking for shl_load" >&5
+if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2344 "ltconfig"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char shl_load(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+shl_load();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:2369: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_shl_load=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_shl_load=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="shl_load"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+echo "$progname:2387: checking for shl_load in -ldld" >&5
+ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldld  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2395 "ltconfig"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load();
+
+int main() {
+shl_load()
+; return 0; }
+EOF
+if { (eval echo $progname:2409: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+fi
+
+    
+fi
+
+  
+fi
+
+
+fi
+
+fi
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  fi
+
+  case "$lt_cv_dlopen" in
+  dlopen)
+for ac_hdr in dlfcn.h; do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "$progname:2452: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2457 "ltconfig"
+#include <$ac_hdr>
+int fnord = 0;
+EOF
+ac_try="$ac_compile >/dev/null 2>conftest.out"
+{ (eval echo $progname:2462: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+    if test "x$ac_cv_header_dlfcn_h" = xyes; then
+      CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+    fi
+    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+  echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:2490: checking whether a program can dlopen itself" >&5
+if test "${lt_cv_dlopen_self+set}" = set; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+    lt_cv_dlopen_self=cross
+  else
+    cat > conftest.c <<EOF
+#line 2498 "ltconfig"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL   RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+#  define LTDL_GLOBAL  DL_GLOBAL
+# else
+#  define LTDL_GLOBAL  0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+#  define LTDL_LAZY_OR_NOW     RTLD_LAZY
+# else
+#  ifdef DL_LAZY
+#   define LTDL_LAZY_OR_NOW    DL_LAZY
+#  else
+#   ifdef RTLD_NOW
+#    define LTDL_LAZY_OR_NOW   RTLD_NOW
+#   else
+#    ifdef DL_NOW
+#     define LTDL_LAZY_OR_NOW  DL_NOW
+#    else
+#     define LTDL_LAZY_OR_NOW  0
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+fnord() { int i=42;}
+main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+              if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
+
+EOF
+if { (eval echo $progname:2544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+  lt_cv_dlopen_self=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  lt_cv_dlopen_self=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self" 1>&6
+
+  if test "$lt_cv_dlopen_self" = yes; then
+    LDFLAGS="$LDFLAGS $link_static_flag"
+  echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:2563: checking whether a statically linked program can dlopen itself" >&5
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+    lt_cv_dlopen_self_static=cross
+  else
+    cat > conftest.c <<EOF
+#line 2571 "ltconfig"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL   RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+#  define LTDL_GLOBAL  DL_GLOBAL
+# else
+#  define LTDL_GLOBAL  0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+#  define LTDL_LAZY_OR_NOW     RTLD_LAZY
+# else
+#  ifdef DL_LAZY
+#   define LTDL_LAZY_OR_NOW    DL_LAZY
+#  else
+#   ifdef RTLD_NOW
+#    define LTDL_LAZY_OR_NOW   RTLD_NOW
+#   else
+#    ifdef DL_NOW
+#     define LTDL_LAZY_OR_NOW  DL_NOW
+#    else
+#     define LTDL_LAZY_OR_NOW  0
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+fnord() { int i=42;}
+main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+    if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
+
+EOF
+if { (eval echo $progname:2617: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+  lt_cv_dlopen_self_static=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  lt_cv_dlopen_self_static=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
+fi
+    ;;
+  esac
+
+  case "$lt_cv_dlopen_self" in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case "$lt_cv_dlopen_self_static" in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+# Copy echo and quote the copy, instead of the original, because it is
+# used later.
+ltecho="$echo"
+if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   ltecho="$CONFIG_SHELL \$0 --fallback-echo"
+fi
+LTSHELL="$SHELL"
+
+LTCONFIG_VERSION="$VERSION"
+
+# Only quote variables if we're using ltmain.sh.
+case "$ltmain" in
+*.sh)
+  # Now quote all the things that may contain metacharacters.
+  for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \
+    old_LD old_LDFLAGS old_LIBS \
+    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \
+    AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
+    reload_flag reload_cmds wl \
+    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
+    library_names_spec soname_spec \
+    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \
+    file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \
+    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+    hardcode_libdir_flag_spec hardcode_libdir_separator  \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+
+    case "$var" in
+    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case "$ltecho" in
+  *'\$0 --fallback-echo"')
+    ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+  trap "$rm \"$ofile\"; exit 1" 1 2 15
+  echo "creating $ofile"
+  $rm "$ofile"
+  cat <<EOF > "$ofile"
+#! $SHELL
+
+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
+#
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="sed -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+### BEGIN LIBTOOL CONFIG
+EOF
+  cfgfile="$ofile"
+  ;;
+
+*)
+  # Double-quote the variables that need it (for aesthetics).
+  for var in old_CC old_CFLAGS old_CPPFLAGS \
+    old_LD old_LDFLAGS old_LIBS \
+    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do
+    eval "$var=\\\"\$var\\\""
+  done
+
+  # Just create a config file.
+  cfgfile="$ofile.cfg"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  echo "creating $cfgfile"
+  $rm "$cfgfile"
+  cat <<EOF > "$cfgfile"
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+EOF
+  ;;
+esac
+
+cat <<EOF >> "$cfgfile"
+# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
+# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
+# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
+# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\
+#   $0$ltconfig_args
+#
+# Compiler and other test output produced by $progname, useful for
+# debugging $progname, is in ./config.log if it exists.
+
+# The version of $progname that generated this script.
+LTCONFIG_VERSION=$LTCONFIG_VERSION
+
+# Shell to use when invoking shell scripts.
+SHELL=$LTSHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$ltecho
+
+# The archiver.
+AR=$AR
+
+# The default C compiler.
+CC=$CC
+
+# The linker used to build libraries.
+LD=$LD
+
+# Whether we need hard or soft links.
+LN_S=$LN_S
+
+# A BSD-compatible nm program.
+NM=$NM
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$reload_flag
+reload_cmds=$reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$wl
+
+# Object file suffix (normally "o").
+objext="$objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$pic_flag
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$compiler_c_o
+
+# Can we write directly to a .lo ?
+compiler_o_lo=$compiler_o_lo
+
+# Must we lock files when doing compilation ?
+need_locks=$need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$link_static_flag
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$RANLIB
+old_archive_cmds=$old_archive_cmds
+old_postinstall_cmds=$old_postinstall_cmds
+old_postuninstall_cmds=$old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$old_archive_from_new_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$archive_cmds
+archive_expsym_cmds=$archive_expsym_cmds
+postinstall_cmds=$postinstall_cmds
+postuninstall_cmds=$postuninstall_cmds
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$global_symbol_to_cdecl
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$include_expsyms
+
+EOF
+
+case "$ltmain" in
+*.sh)
+  echo '### END LIBTOOL CONFIG' >> "$ofile"
+  echo >> "$ofile"
+  case "$host_os" in
+  aix3*)
+    cat <<\EOF >> "$ofile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  # Append the ltmain.sh script.
+  sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+
+  chmod +x "$ofile"
+  ;;
+
+*)
+  # Compile the libtool program.
+  echo "FIXME: would compile $ltmain"
+  ;;
+esac
+
+test -n "$cache_file" || exit 0
+
+# AC_CACHE_SAVE
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/boehm-gc/ltmain.sh b/boehm-gc/ltmain.sh
new file mode 100644 (file)
index 0000000..50515ad
--- /dev/null
@@ -0,0 +1,4012 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun ltconfig.
+#
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell, and then maybe $echo will work.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# The name of this program.
+progname=`$echo "$0" | sed 's%^.*/%%'`
+modename="$progname"
+
+# Constants.
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.3.4
+TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)"
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+SP2NL='tr \040 \012'
+NL2SP='tr \015\012 \040\040'
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+  save_LANG="$LANG"; LANG=C; export LANG
+fi
+
+if test "$LTCONFIG_VERSION" != "$VERSION"; then
+  echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  echo "$modename: not configured to build any kind of library" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+
+# Parse our command line options once, thoroughly.
+while test $# -gt 0
+do
+  arg="$1"
+  shift
+
+  case "$arg" in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case "$prev" in
+    execute_dlfiles)
+      eval "$prev=\"\$$prev \$arg\""
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case "$arg" in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+    exit 0
+    ;;
+
+  --config)
+    sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
+    exit 0
+    ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+    exit 0
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --quiet | --silent)
+    show=:
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+fi
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    case "$nonopt" in
+    *cc | *++ | gcc* | *-gcc*)
+      mode=link
+      for arg
+      do
+       case "$arg" in
+       -c)
+          mode=compile
+          break
+          ;;
+       esac
+      done
+      ;;
+    *db | *dbx | *strace | *truss)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+       if test -n "$nonopt"; then
+         $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+       else
+         $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+       fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case "$mode" in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    lastarg=
+    srcfile="$nonopt"
+    suppress_output=
+
+    user_target=no
+    for arg
+    do
+      # Accept any command-line options.
+      case "$arg" in
+      -o)
+       if test "$user_target" != "no"; then
+         $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+         exit 1
+       fi
+       user_target=next
+       ;;
+
+      -static)
+       build_old_libs=yes
+       continue
+       ;;
+      esac
+
+      case "$user_target" in
+      next)
+       # The next one is the -o target name
+       user_target=yes
+       continue
+       ;;
+      yes)
+       # We got the output file
+       user_target=set
+       libobj="$arg"
+       continue
+       ;;
+      esac
+
+      # Accept the current argument as the source file.
+      lastarg="$srcfile"
+      srcfile="$arg"
+
+      # Aesthetically quote the previous argument.
+
+      # Backslashify any backslashes, double quotes, and dollar signs.
+      # These are the only characters that are still specially
+      # interpreted inside of double-quoted scrings.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly in scan
+      # sets, so we specify it separately.
+      case "$lastarg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \    ]*|*]*)
+       lastarg="\"$lastarg\""
+       ;;
+      esac
+
+      # Add the previous argument to base_compile.
+      if test -z "$base_compile"; then
+       base_compile="$lastarg"
+      else
+       base_compile="$base_compile $lastarg"
+      fi
+    done
+
+    case "$user_target" in
+    set)
+      ;;
+    no)
+      # Get the name of the library object.
+      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      ;;
+    *)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    xform='[cCFSfmso]'
+    case "$libobj" in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.f90) xform=f90 ;;
+    *.for) xform=for ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case "$libobj" in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $libobj"
+    else
+      removelist="$libobj"
+    fi
+
+    $run $rm $removelist
+    trap "$run $rm $removelist; exit 1" 1 2 15
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+      removelist="$removelist $output_obj $lockfile"
+      trap "$run $rm $removelist; exit 1" 1 2 15
+    else
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until ln "$0" "$lockfile" 2>/dev/null; do
+       $show "Waiting for $lockfile to be removed"
+       sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+       echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+       $run $rm $removelist
+       exit 1
+      fi
+      echo $srcfile > "$lockfile"
+    fi
+
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      # All platforms use -DPIC, to notify preprocessed assembler code.
+      command="$base_compile $srcfile $pic_flag -DPIC"
+      if test "$build_old_libs" = yes; then
+       lo_libobj="$libobj"
+       dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+       if test "X$dir" = "X$libobj"; then
+         dir="$objdir"
+       else
+         dir="$dir/$objdir"
+       fi
+       libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+
+       if test -d "$dir"; then
+         $show "$rm $libobj"
+         $run $rm $libobj
+       else
+         $show "$mkdir $dir"
+         $run $mkdir $dir
+         status=$?
+         if test $status -ne 0 && test ! -d $dir; then
+           exit $status
+         fi
+       fi
+      fi
+      if test "$compiler_o_lo" = yes; then
+       output_obj="$libobj"
+       command="$command -o $output_obj"
+      elif test "$compiler_c_o" = yes; then
+       output_obj="$obj"
+       command="$command -o $output_obj"
+      fi
+
+      $run $rm "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+       test -n "$output_obj" && $run $rm $removelist
+       exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+        test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+       echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+       $run $rm $removelist
+       exit 1
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test x"$output_obj" != x"$libobj"; then
+       $show "$mv $output_obj $libobj"
+       if $run $mv $output_obj $libobj; then :
+       else
+         error=$?
+         $run $rm $removelist
+         exit $error
+       fi
+      fi
+
+      # If we have no pic_flag, then copy the object into place and finish.
+      if test -z "$pic_flag" && test "$build_old_libs" = yes; then
+       # Rename the .lo from within objdir to obj
+       if test -f $obj; then
+         $show $rm $obj
+         $run $rm $obj
+       fi
+
+       $show "$mv $libobj $obj"
+       if $run $mv $libobj $obj; then :
+       else
+         error=$?
+         $run $rm $removelist
+         exit $error
+       fi
+
+       xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+       if test "X$xdir" = "X$obj"; then
+         xdir="."
+       else
+         xdir="$xdir"
+       fi
+       baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
+       libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+       # Now arrange that obj and lo_libobj become the same file
+       $show "(cd $xdir && $LN_S $baseobj $libobj)"
+       if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
+         exit 0
+       else
+         error=$?
+         $run $rm $removelist
+         exit $error
+       fi
+      fi
+
+      # Allow error messages only from the first compilation.
+      suppress_output=' >/dev/null 2>&1'
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      command="$base_compile $srcfile"
+      if test "$compiler_c_o" = yes; then
+       command="$command -o $obj"
+       output_obj="$obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      command="$command$suppress_output"
+      $run $rm "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+       $run $rm $removelist
+       exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+        test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+       echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+       $run $rm $removelist
+       exit 1
+      fi
+
+      # Just move the object if needed
+      if test x"$output_obj" != x"$obj"; then
+       $show "$mv $output_obj $obj"
+       if $run $mv $output_obj $obj; then :
+       else
+         error=$?
+         $run $rm $removelist
+         exit $error
+       fi
+      fi
+
+      # Create an invalid libtool object if no PIC, so that we do not
+      # accidentally link it into a program.
+      if test "$build_libtool_libs" != yes; then
+       $show "echo timestamp > $libobj"
+       $run eval "echo timestamp > \$libobj" || exit $?
+      else
+       # Move the .lo from within objdir
+       $show "$mv $libobj $lo_libobj"
+       if $run $mv $libobj $lo_libobj; then :
+       else
+         error=$?
+         $run $rm $removelist
+         exit $error
+       fi
+      fi
+    fi
+
+    # Unlock the critical section if it was locked
+    if test "$need_locks" != no; then
+      $rm "$lockfile"
+    fi
+
+    exit 0
+    ;;
+
+  # libtool link mode
+  link)
+    modename="$modename: link"
+    case "$host" in
+    *-*-cygwin* | *-*-mingw* | *-*-os2*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invokation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+
+      # This is a source program that is used to create dlls on Windows
+      # Don't remove nor modify the starting and closing comments
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+      # This is a source program that is used to create import libraries
+      # on Windows for dlls which lack them. Don't remove nor modify the
+      # starting and closing comments
+# /* impgen.c starts here */
+# /*   Copyright (C) 1999 Free Software Foundation, Inc.
+# 
+#  This file is part of GNU libtool.
+# 
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+# 
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+# 
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#  */
+# 
+#  #include <stdio.h>          /* for printf() */
+#  #include <unistd.h>         /* for open(), lseek(), read() */
+#  #include <fcntl.h>          /* for O_RDONLY, O_BINARY */
+#  #include <string.h>         /* for strdup() */
+# 
+#  static unsigned int
+#  pe_get16 (fd, offset)
+#       int fd;
+#       int offset;
+#  {
+#    unsigned char b[2];
+#    lseek (fd, offset, SEEK_SET);
+#    read (fd, b, 2);
+#    return b[0] + (b[1]<<8);
+#  }
+# 
+#  static unsigned int
+#  pe_get32 (fd, offset)
+#      int fd;
+#      int offset;
+#  {
+#    unsigned char b[4];
+#    lseek (fd, offset, SEEK_SET);
+#    read (fd, b, 4);
+#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+#  }
+# 
+#  static unsigned int
+#  pe_as32 (ptr)
+#       void *ptr;
+#  {
+#    unsigned char *b = ptr;
+#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+#  }
+# 
+#  int
+#  main (argc, argv)
+#      int argc;
+#      char *argv[];
+#  {
+#      int dll;
+#      unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
+#      unsigned long export_rva, export_size, nsections, secptr, expptr;
+#      unsigned long name_rvas, nexp;
+#      unsigned char *expdata, *erva;
+#      char *filename, *dll_name;
+# 
+#      filename = argv[1];
+# 
+#      dll = open(filename, O_RDONLY|O_BINARY);
+#      if (!dll)
+#      return 1;
+# 
+#      dll_name = filename;
+#    
+#      for (i=0; filename[i]; i++)
+#      if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
+#          dll_name = filename + i +1;
+# 
+#      pe_header_offset = pe_get32 (dll, 0x3c);
+#      opthdr_ofs = pe_header_offset + 4 + 20;
+#      num_entries = pe_get32 (dll, opthdr_ofs + 92);
+# 
+#      if (num_entries < 1) /* no exports */
+#      return 1;
+# 
+#      export_rva = pe_get32 (dll, opthdr_ofs + 96);
+#      export_size = pe_get32 (dll, opthdr_ofs + 100);
+#      nsections = pe_get16 (dll, pe_header_offset + 4 +2);
+#      secptr = (pe_header_offset + 4 + 20 +
+#            pe_get16 (dll, pe_header_offset + 4 + 16));
+# 
+#      expptr = 0;
+#      for (i = 0; i < nsections; i++)
+#      {
+#      char sname[8];
+#      unsigned long secptr1 = secptr + 40 * i;
+#      unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
+#      unsigned long vsize = pe_get32 (dll, secptr1 + 16);
+#      unsigned long fptr = pe_get32 (dll, secptr1 + 20);
+#      lseek(dll, secptr1, SEEK_SET);
+#      read(dll, sname, 8);
+#      if (vaddr <= export_rva && vaddr+vsize > export_rva)
+#      {
+#          expptr = fptr + (export_rva - vaddr);
+#          if (export_rva + export_size > vaddr + vsize)
+#              export_size = vsize - (export_rva - vaddr);
+#          break;
+#      }
+#      }
+# 
+#      expdata = (unsigned char*)malloc(export_size);
+#      lseek (dll, expptr, SEEK_SET);
+#      read (dll, expdata, export_size);
+#      erva = expdata - export_rva;
+# 
+#      nexp = pe_as32 (expdata+24);
+#      name_rvas = pe_as32 (expdata+32);
+# 
+#      printf ("EXPORTS\n");
+#      for (i = 0; i<nexp; i++)
+#      {
+#      unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
+#      printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
+#      }
+# 
+#      return 0;
+#  }
+# /* impgen.c ends here */
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    compile_command="$nonopt"
+    finalize_command="$nonopt"
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    linkopts=
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      lib_search_path=
+    fi
+    # now prepend the system-specific ones
+    eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+    
+    avoid_version=no
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    link_against_libtool_libs=
+    ltlibs=
+    module=no
+    objs=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case "$arg" in
+      -all-static | -static)
+       if test "X$arg" = "X-all-static"; then
+         if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+           $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+         fi
+         if test -n "$link_static_flag"; then
+           dlopen_self=$dlopen_self_static
+         fi
+       else
+         if test -z "$pic_flag" && test -n "$link_static_flag"; then
+           dlopen_self=$dlopen_self_static
+         fi
+       fi
+       build_libtool_libs=no
+       build_old_libs=yes
+       prefer_static_libs=yes
+       break
+       ;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test $# -gt 0; do
+      arg="$1"
+      shift
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+       case "$prev" in
+       output)
+         compile_command="$compile_command @OUTPUT@"
+         finalize_command="$finalize_command @OUTPUT@"
+         ;;
+       esac
+
+       case "$prev" in
+       dlfiles|dlprefiles)
+         if test "$preload" = no; then
+           # Add the symbol object into the linking commands.
+           compile_command="$compile_command @SYMFILE@"
+           finalize_command="$finalize_command @SYMFILE@"
+           preload=yes
+         fi
+         case "$arg" in
+         *.la | *.lo) ;;  # We handle these cases below.
+         force)
+           if test "$dlself" = no; then
+             dlself=needless
+             export_dynamic=yes
+           fi
+           prev=
+           continue
+           ;;
+         self)
+           if test "$prev" = dlprefiles; then
+             dlself=yes
+           elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+             dlself=yes
+           else
+             dlself=needless
+             export_dynamic=yes
+           fi
+           prev=
+           continue
+           ;;
+         *)
+           if test "$prev" = dlfiles; then
+             dlfiles="$dlfiles $arg"
+           else
+             dlprefiles="$dlprefiles $arg"
+           fi
+           prev=
+           ;;
+         esac
+         ;;
+       expsyms)
+         export_symbols="$arg"
+         if test ! -f "$arg"; then
+           $echo "$modename: symbol file \`$arg' does not exist"
+           exit 1
+         fi
+         prev=
+         continue
+         ;;
+       expsyms_regex)
+         export_symbols_regex="$arg"
+         prev=
+         continue
+         ;;
+       release)
+         release="-$arg"
+         prev=
+         continue
+         ;;
+       rpath | xrpath)
+         # We need an absolute path.
+         case "$arg" in
+         [\\/]* | [A-Za-z]:[\\/]*) ;;
+         *)
+           $echo "$modename: only absolute run-paths are allowed" 1>&2
+           exit 1
+           ;;
+         esac
+         if test "$prev" = rpath; then
+           case "$rpath " in
+           *" $arg "*) ;;
+           *) rpath="$rpath $arg" ;;
+           esac
+         else
+           case "$xrpath " in
+           *" $arg "*) ;;
+           *) xrpath="$xrpath $arg" ;;
+           esac
+         fi
+         prev=
+         continue
+         ;;
+       *)
+         eval "$prev=\"\$arg\""
+         prev=
+         continue
+         ;;
+       esac
+      fi
+
+      prevarg="$arg"
+
+      case "$arg" in
+      -all-static)
+       if test -n "$link_static_flag"; then
+         compile_command="$compile_command $link_static_flag"
+         finalize_command="$finalize_command $link_static_flag"
+       fi
+       continue
+       ;;
+
+      -allow-undefined)
+       # FIXME: remove this flag sometime in the future.
+       $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+       continue
+       ;;
+
+      -avoid-version)
+       avoid_version=yes
+       continue
+       ;;
+
+      -dlopen)
+       prev=dlfiles
+       continue
+       ;;
+
+      -dlpreopen)
+       prev=dlprefiles
+       continue
+       ;;
+
+      -export-dynamic)
+       export_dynamic=yes
+       continue
+       ;;
+
+      -export-symbols | -export-symbols-regex)
+       if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+         $echo "$modename: not more than one -exported-symbols argument allowed"
+         exit 1
+       fi
+       if test "X$arg" = "X-export-symbols"; then
+         prev=expsyms
+       else
+         prev=expsyms_regex
+       fi
+       continue
+       ;;
+
+      -L*)
+       dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+       # We need an absolute path.
+       case "$dir" in
+       [\\/]* | [A-Za-z]:[\\/]*) ;;
+       *)
+         absdir=`cd "$dir" && pwd`
+         if test -z "$absdir"; then
+           $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+           $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+           absdir="$dir"
+         fi
+         dir="$absdir"
+         ;;
+       esac
+       case " $deplibs " in
+       *" $arg "*) ;;
+       *) deplibs="$deplibs $arg";;
+       esac
+       case " $lib_search_path " in
+       *" $dir "*) ;;
+       *) lib_search_path="$lib_search_path $dir";;
+       esac
+       case "$host" in
+       *-*-cygwin* | *-*-mingw* | *-*-os2*)
+         dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
+         case ":$dllsearchpath:" in
+         ::) dllsearchpath="$dllsearchdir";;
+         *":$dllsearchdir:"*) ;;
+         *) dllsearchpath="$dllsearchpath:$dllsearchdir";;
+         esac
+         ;;
+       esac
+       ;;
+
+      -l*)
+       if test "$arg" = "-lc"; then
+         case "$host" in
+         *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
+           # These systems don't actually have c library (as such)
+           continue
+           ;;
+         esac
+       elif test "$arg" = "-lm"; then
+         case "$host" in
+         *-*-cygwin* | *-*-beos*)
+           # These systems don't actually have math library (as such)
+           continue
+           ;;
+         esac
+       fi
+       deplibs="$deplibs $arg"
+       ;;
+
+      -module)
+       module=yes
+       continue
+       ;;
+
+      -no-undefined)
+       allow_undefined=no
+       continue
+       ;;
+
+      -o) prev=output ;;
+
+      -release)
+       prev=release
+       continue
+       ;;
+
+      -rpath)
+       prev=rpath
+       continue
+       ;;
+
+      -R)
+       prev=xrpath
+       continue
+       ;;
+
+      -R*)
+       dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+       # We need an absolute path.
+       case "$dir" in
+       [\\/]* | [A-Za-z]:[\\/]*) ;;
+       *)
+         $echo "$modename: only absolute run-paths are allowed" 1>&2
+         exit 1
+         ;;
+       esac
+       case "$xrpath " in
+       *" $dir "*) ;;
+       *) xrpath="$xrpath $dir" ;;
+       esac
+       continue
+       ;;
+
+      -static)
+       # If we have no pic_flag, then this is the same as -all-static.
+       if test -z "$pic_flag" && test -n "$link_static_flag"; then
+         compile_command="$compile_command $link_static_flag"
+         finalize_command="$finalize_command $link_static_flag"
+       fi
+       continue
+       ;;
+
+      -thread-safe)
+       thread_safe=yes
+       continue
+       ;;
+
+      -version-info)
+       prev=vinfo
+       continue
+       ;;
+
+      # Some other compiler flag.
+      -* | +*)
+       # Unknown arguments in both finalize_command and compile_command need
+       # to be aesthetically quoted because they are evaled later.
+       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+       case "$arg" in
+       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*)
+         arg="\"$arg\""
+         ;;
+       esac
+       ;;
+
+      *.o | *.obj | *.a | *.lib)
+       # A standard object.
+       objs="$objs $arg"
+       ;;
+
+      *.lo)
+       # A library object.
+       if test "$prev" = dlfiles; then
+         dlfiles="$dlfiles $arg"
+         if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then
+           prev=
+           continue
+         else
+           # If libtool objects are unsupported, then we need to preload.
+           prev=dlprefiles
+         fi
+       fi
+
+       if test "$prev" = dlprefiles; then
+         # Preload the old-style object.
+         dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
+         prev=
+       fi
+       libobjs="$libobjs $arg"
+       ;;
+
+      *.la)
+       # A libtool-controlled library.
+
+       dlname=
+       libdir=
+       library_names=
+       old_library=
+
+       # Check to see that this really is a libtool archive.
+       if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+       else
+         $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
+         exit 1
+       fi
+
+       # If the library was installed with an old release of libtool,
+       # it will not redefine variable installed.
+       installed=yes
+
+       # Read the .la file
+       # If there is no directory component, then add one.
+       case "$arg" in
+       */* | *\\*) . $arg ;;
+       *) . ./$arg ;;
+       esac
+
+       # Get the name of the library we link against.
+       linklib=
+       for l in $old_library $library_names; do
+         linklib="$l"
+       done
+
+       if test -z "$linklib"; then
+         $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
+         exit 1
+       fi
+
+       # Find the relevant object directory and library name.
+       name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
+
+       if test "X$installed" = Xyes; then
+         dir="$libdir"
+       else
+         dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+         if test "X$dir" = "X$arg"; then
+           dir="$objdir"
+         else
+           dir="$dir/$objdir"
+         fi
+       fi
+
+       if test -n "$dependency_libs"; then
+         # Extract -R and -L from dependency_libs
+         temp_deplibs=
+         for deplib in $dependency_libs; do
+           case "$deplib" in
+           -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+                case " $rpath $xrpath " in
+                *" $temp_xrpath "*) ;;
+                *) xrpath="$xrpath $temp_xrpath";;
+                esac;;
+           -L*) case "$compile_command $temp_deplibs " in
+                *" $deplib "*) ;;
+                *) temp_deplibs="$temp_deplibs $deplib";;
+                esac
+                temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+                case " $lib_search_path " in
+                *" $temp_dir "*) ;;
+                *) lib_search_path="$lib_search_path $temp_dir";;
+                esac
+                ;;
+           *) temp_deplibs="$temp_deplibs $deplib";;
+           esac
+         done
+         dependency_libs="$temp_deplibs"
+       fi
+
+       if test -z "$libdir"; then
+         # It is a libtool convenience library, so add in its objects.
+         convenience="$convenience $dir/$old_library"
+         old_convenience="$old_convenience $dir/$old_library"
+         deplibs="$deplibs$dependency_libs"
+         compile_command="$compile_command $dir/$old_library$dependency_libs"
+         finalize_command="$finalize_command $dir/$old_library$dependency_libs"
+         continue
+       fi
+
+       # This library was specified with -dlopen.
+       if test "$prev" = dlfiles; then
+         dlfiles="$dlfiles $arg"
+         if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then
+           # If there is no dlname, no dlopen support or we're linking statically,
+           # we need to preload.
+           prev=dlprefiles
+         else
+           # We should not create a dependency on this library, but we
+           # may need any libraries it requires.
+           compile_command="$compile_command$dependency_libs"
+           finalize_command="$finalize_command$dependency_libs"
+           prev=
+           continue
+         fi
+       fi
+
+       # The library was specified with -dlpreopen.
+       if test "$prev" = dlprefiles; then
+         # Prefer using a static library (so that no silly _DYNAMIC symbols
+         # are required to link).
+         if test -n "$old_library"; then
+           dlprefiles="$dlprefiles $dir/$old_library"
+         else
+           dlprefiles="$dlprefiles $dir/$linklib"
+         fi
+         prev=
+       fi
+
+       if test -n "$library_names" &&
+          { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+         link_against_libtool_libs="$link_against_libtool_libs $arg"
+         if test -n "$shlibpath_var"; then
+           # Make sure the rpath contains only unique directories.
+           case "$temp_rpath " in
+           *" $dir "*) ;;
+           *) temp_rpath="$temp_rpath $dir" ;;
+           esac
+         fi
+
+         # We need an absolute path.
+         case "$dir" in
+         [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+         *)
+           absdir=`cd "$dir" && pwd`
+           if test -z "$absdir"; then
+             $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+             $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+             absdir="$dir"
+           fi
+           ;;
+         esac
+         
+         # This is the magic to use -rpath.
+         # Skip directories that are in the system default run-time
+         # search path, unless they have been requested with -R.
+         case " $sys_lib_dlsearch_path " in
+         *" $absdir "*) ;;
+         *)
+           case "$compile_rpath " in
+           *" $absdir "*) ;;
+           *) compile_rpath="$compile_rpath $absdir" 
+           esac
+           ;;
+         esac
+
+         case " $sys_lib_dlsearch_path " in
+         *" $libdir "*) ;;
+         *)
+           case "$finalize_rpath " in
+           *" $libdir "*) ;;
+           *) finalize_rpath="$finalize_rpath $libdir"
+           esac
+           ;;
+         esac
+
+         lib_linked=yes
+         case "$hardcode_action" in
+         immediate | unsupported)
+           if test "$hardcode_direct" = no; then
+             compile_command="$compile_command $dir/$linklib"
+             deplibs="$deplibs $dir/$linklib"
+             case "$host" in
+             *-*-cygwin* | *-*-mingw* | *-*-os2*)
+               dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
+               if test -n "$dllsearchpath"; then
+                 dllsearchpath="$dllsearchpath:$dllsearchdir"
+               else
+                 dllsearchpath="$dllsearchdir"
+               fi
+               ;;
+             esac
+           elif test "$hardcode_minus_L" = no; then
+             case "$host" in
+             *-*-sunos*)
+               compile_shlibpath="$compile_shlibpath$dir:"
+               ;;
+             esac
+             case "$compile_command " in
+             *" -L$dir "*) ;;
+             *) compile_command="$compile_command -L$dir";;
+             esac
+             compile_command="$compile_command -l$name"
+             deplibs="$deplibs -L$dir -l$name"
+           elif test "$hardcode_shlibpath_var" = no; then
+             case ":$compile_shlibpath:" in
+             *":$dir:"*) ;;
+             *) compile_shlibpath="$compile_shlibpath$dir:";;
+             esac
+             compile_command="$compile_command -l$name"
+             deplibs="$deplibs -l$name"
+           else
+             lib_linked=no
+           fi
+           ;;
+
+         relink)
+           if test "$hardcode_direct" = yes; then
+             compile_command="$compile_command $absdir/$linklib"
+             deplibs="$deplibs $absdir/$linklib"
+           elif test "$hardcode_minus_L" = yes; then
+             case "$compile_command " in
+             *" -L$absdir "*) ;;
+             *) compile_command="$compile_command -L$absdir";;
+             esac
+             compile_command="$compile_command -l$name"
+             deplibs="$deplibs -L$absdir -l$name"
+           elif test "$hardcode_shlibpath_var" = yes; then
+             case ":$compile_shlibpath:" in
+             *":$absdir:"*) ;;
+             *) compile_shlibpath="$compile_shlibpath$absdir:";;
+             esac
+             compile_command="$compile_command -l$name"
+             deplibs="$deplibs -l$name"
+           else
+             lib_linked=no
+           fi
+           ;;
+
+         *)
+           lib_linked=no
+           ;;
+         esac
+
+         if test "$lib_linked" != yes; then
+           $echo "$modename: configuration error: unsupported hardcode properties"
+           exit 1
+         fi
+
+         # Finalize command for both is simple: just hardcode it.
+         if test "$hardcode_direct" = yes; then
+           finalize_command="$finalize_command $libdir/$linklib"
+         elif test "$hardcode_minus_L" = yes; then
+           case "$finalize_command " in
+           *" -L$libdir "*) ;;
+           *) finalize_command="$finalize_command -L$libdir";;
+           esac
+           finalize_command="$finalize_command -l$name"
+         elif test "$hardcode_shlibpath_var" = yes; then
+           case ":$finalize_shlibpath:" in
+           *":$libdir:"*) ;;
+           *) finalize_shlibpath="$finalize_shlibpath$libdir:";;
+           esac
+           finalize_command="$finalize_command -l$name"
+         else
+           # We cannot seem to hardcode it, guess we'll fake it.
+           case "$finalize_command " in
+           *" -L$dir "*) ;;
+           *) finalize_command="$finalize_command -L$libdir";;
+           esac
+           finalize_command="$finalize_command -l$name"
+         fi
+       else
+         # Transform directly to old archives if we don't build new libraries.
+         if test -n "$pic_flag" && test -z "$old_library"; then
+           $echo "$modename: cannot find static library for \`$arg'" 1>&2
+           exit 1
+         fi
+
+         # Here we assume that one of hardcode_direct or hardcode_minus_L
+         # is not unsupported.  This is valid on all known static and
+         # shared platforms.
+         if test "$hardcode_direct" != unsupported; then
+           test -n "$old_library" && linklib="$old_library"
+           compile_command="$compile_command $dir/$linklib"
+           finalize_command="$finalize_command $dir/$linklib"
+         else
+           case "$compile_command " in
+           *" -L$dir "*) ;;
+           *) compile_command="$compile_command -L$dir";;
+           esac
+           compile_command="$compile_command -l$name"
+           case "$finalize_command " in
+           *" -L$dir "*) ;;
+           *) finalize_command="$finalize_command -L$dir";;
+           esac
+           finalize_command="$finalize_command -l$name"
+         fi
+       fi
+
+       # Add in any libraries that this one depends upon.
+       compile_command="$compile_command$dependency_libs"
+       finalize_command="$finalize_command$dependency_libs"
+       continue
+       ;;
+
+      # Some other compiler argument.
+      *)
+       # Unknown arguments in both finalize_command and compile_command need
+       # to be aesthetically quoted because they are evaled later.
+       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+       case "$arg" in
+       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \   ]*|*]*)
+         arg="\"$arg\""
+         ;;
+       esac
+       ;;
+      esac
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+       compile_command="$compile_command $arg"
+       finalize_command="$finalize_command $arg"
+      fi
+    done
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    libobjs_save="$libobjs"
+
+    case "$output" in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+      ;;
+
+    *.a | *.lib)
+      if test -n "$link_against_libtool_libs"; then
+       $echo "$modename: error: cannot link libtool libraries into archives" 1>&2
+       exit 1
+      fi
+
+      if test -n "$deplibs"; then
+       $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+       $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+       $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+       $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+       $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$release"; then
+       $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+       $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+      fi
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      ;;
+
+    *.la)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case "$outputname" in
+      lib*)
+       name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+       eval libname=\"$libname_spec\"
+       ;;
+      *)
+       if test "$module" = no; then
+         $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+         $echo "$help" 1>&2
+         exit 1
+       fi
+       if test "$need_lib_prefix" != no; then
+         # Add the "lib" prefix for modules if required
+         name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+         eval libname=\"$libname_spec\"
+       else
+         libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+       fi
+       ;;
+      esac
+
+      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$output_objdir" = "X$output"; then
+       output_objdir="$objdir"
+      else
+       output_objdir="$output_objdir/$objdir"
+      fi
+
+      if test -n "$objs"; then
+       $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
+       exit 1
+      fi
+
+      # How the heck are we supposed to write a wrapper for a shared library?
+      if test -n "$link_against_libtool_libs"; then
+        $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
+        exit 1
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+       $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
+      fi
+
+      set dummy $rpath
+      if test $# -gt 2; then
+       $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      oldlibs=
+      if test -z "$rpath"; then
+       if test "$build_libtool_libs" = yes; then
+         # Building a libtool convenience library.
+         libext=al
+         oldlibs="$output_objdir/$libname.$libext $oldlibs"
+         build_libtool_libs=convenience
+         build_old_libs=yes
+       fi
+       dependency_libs="$deplibs"
+
+       if test -n "$vinfo"; then
+         $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+       fi
+
+       if test -n "$release"; then
+         $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+       fi
+      else
+
+       # Parse the version information argument.
+       IFS="${IFS=     }"; save_ifs="$IFS"; IFS=':'
+       set dummy $vinfo 0 0 0
+       IFS="$save_ifs"
+
+       if test -n "$8"; then
+         $echo "$modename: too many parameters to \`-version-info'" 1>&2
+         $echo "$help" 1>&2
+         exit 1
+       fi
+
+       current="$2"
+       revision="$3"
+       age="$4"
+
+       # Check that each of the things are valid numbers.
+       case "$current" in
+