OSDN Git Service

2006-05-24 Carlos O'Donell <carlos@codesourcery.com>
authorcarlos <carlos@138bc75d-0d04-0410-961f-82ee72b054a4>
Wed, 24 May 2006 17:57:58 +0000 (17:57 +0000)
committercarlos <carlos@138bc75d-0d04-0410-961f-82ee72b054a4>
Wed, 24 May 2006 17:57:58 +0000 (17:57 +0000)
* Makefile.def: Add install-html target. Add datarootdir
docdir and htmldir to flags_to_pass.
* Makefile.tpl: Add install-html target.
* Makefile.in: Regenerate.
* configure.in: Add --with-datarootdir, --with-docdir, and
--with-htmldir options. AC_SUBST datarootdir, docdir and htmldir.
* configure: Regenerate.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@114048 138bc75d-0d04-0410-961f-82ee72b054a4

ChangeLog
Makefile.def
Makefile.in
Makefile.tpl
configure
configure.in

index 55d679f..a493834 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,13 @@
+2006-05-24  Carlos O'Donell  <carlos@codesourcery.com>
+
+       * Makefile.def: Add install-html target. Add datarootdir
+       docdir and htmldir to flags_to_pass.
+       * Makefile.tpl: Add install-html target.
+       * Makefile.in: Regenerate.
+       * configure.in: Add --with-datarootdir, --with-docdir, and
+       --with-htmldir options. AC_SUBST datarootdir, docdir and htmldir.
+       * configure: Regenerate.
+
 2006-05-24  Mark Shinwell  <shinwell@codesourcery.com>
 
        * configure.in: Enable gprof for cross builds.
index 3dccd6d..09d9c98 100644 (file)
@@ -154,6 +154,9 @@ recursive_targets = { make_target= TAGS;
 recursive_targets = { make_target= install-info; 
                       depend=configure;
                       depend=info; };
+recursive_targets = { make_target= install-html; 
+                      depend=configure;
+                      depend=html; };
 recursive_targets = { make_target= installcheck; 
                       depend=configure; };
 recursive_targets = { make_target= mostlyclean; };
@@ -171,7 +174,10 @@ flags_to_pass = { flag= bindir ; };
 flags_to_pass = { flag= datadir ; };
 flags_to_pass = { flag= exec_prefix ; };
 flags_to_pass = { flag= includedir ; };
+flags_to_pass = { flag= datarootdir ; };
+flags_to_pass = { flag= docdir ; };
 flags_to_pass = { flag= infodir ; };
+flags_to_pass = { flag= htmldir ; };
 flags_to_pass = { flag= libdir ; };
 flags_to_pass = { flag= libexecdir ; };
 flags_to_pass = { flag= lispdir ; };
index 2d92c4a..7905975 100644 (file)
@@ -50,6 +50,9 @@ libdir = @libdir@
 includedir = @includedir@
 oldincludedir = @oldincludedir@
 infodir = @infodir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+htmldir = @htmldir@
 mandir = @mandir@
 man1dir = $(mandir)/man1
 man2dir = $(mandir)/man2
@@ -401,7 +404,10 @@ BASE_FLAGS_TO_PASS = \
        "datadir=$(datadir)" \
        "exec_prefix=$(exec_prefix)" \
        "includedir=$(includedir)" \
+       "datarootdir=$(datarootdir)" \
+       "docdir=$(docdir)" \
        "infodir=$(infodir)" \
+       "htmldir=$(htmldir)" \
        "libdir=$(libdir)" \
        "libexecdir=$(libexecdir)" \
        "lispdir=$(lispdir)" \
@@ -1298,6 +1304,110 @@ install-info-target: maybe-install-info-target-rda
 install-info-target: maybe-install-info-target-libada
 install-info-target: maybe-install-info-target-libgomp
 
+.PHONY: do-install-html
+do-install-html:
+       @: $(MAKE); $(unstage)
+       @r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(MAKE) $(RECURSE_FLAGS_TO_PASS) install-html-host \
+         install-html-target
+
+
+.PHONY: install-html-host
+
+install-html-host: maybe-install-html-ash
+install-html-host: maybe-install-html-autoconf
+install-html-host: maybe-install-html-automake
+install-html-host: maybe-install-html-bash
+install-html-host: maybe-install-html-bfd
+install-html-host: maybe-install-html-opcodes
+install-html-host: maybe-install-html-binutils
+install-html-host: maybe-install-html-bison
+install-html-host: maybe-install-html-byacc
+install-html-host: maybe-install-html-bzip2
+install-html-host: maybe-install-html-dejagnu
+install-html-host: maybe-install-html-diff
+install-html-host: maybe-install-html-dosutils
+install-html-host: maybe-install-html-etc
+install-html-host: maybe-install-html-fastjar
+install-html-host: maybe-install-html-fileutils
+install-html-host: maybe-install-html-findutils
+install-html-host: maybe-install-html-find
+install-html-host: maybe-install-html-fixincludes
+install-html-host: maybe-install-html-flex
+install-html-host: maybe-install-html-gas
+install-html-host: maybe-install-html-gcc
+install-html-host: maybe-install-html-gawk
+install-html-host: maybe-install-html-gettext
+install-html-host: maybe-install-html-gnuserv
+install-html-host: maybe-install-html-gprof
+install-html-host: maybe-install-html-gzip
+install-html-host: maybe-install-html-hello
+install-html-host: maybe-install-html-indent
+install-html-host: maybe-install-html-intl
+install-html-host: maybe-install-html-tcl
+install-html-host: maybe-install-html-itcl
+install-html-host: maybe-install-html-ld
+install-html-host: maybe-install-html-libcpp
+install-html-host: maybe-install-html-libdecnumber
+install-html-host: maybe-install-html-libgui
+install-html-host: maybe-install-html-libiberty
+install-html-host: maybe-install-html-libtool
+install-html-host: maybe-install-html-m4
+install-html-host: maybe-install-html-make
+install-html-host: maybe-install-html-mmalloc
+install-html-host: maybe-install-html-patch
+install-html-host: maybe-install-html-perl
+install-html-host: maybe-install-html-prms
+install-html-host: maybe-install-html-rcs
+install-html-host: maybe-install-html-readline
+install-html-host: maybe-install-html-release
+install-html-host: maybe-install-html-recode
+install-html-host: maybe-install-html-sed
+install-html-host: maybe-install-html-send-pr
+install-html-host: maybe-install-html-shellutils
+install-html-host: maybe-install-html-sid
+install-html-host: maybe-install-html-sim
+install-html-host: maybe-install-html-tar
+install-html-host: maybe-install-html-texinfo
+install-html-host: maybe-install-html-textutils
+install-html-host: maybe-install-html-time
+install-html-host: maybe-install-html-uudecode
+install-html-host: maybe-install-html-wdiff
+install-html-host: maybe-install-html-zip
+install-html-host: maybe-install-html-zlib
+install-html-host: maybe-install-html-gdb
+install-html-host: maybe-install-html-expect
+install-html-host: maybe-install-html-guile
+install-html-host: maybe-install-html-tk
+install-html-host: maybe-install-html-libtermcap
+install-html-host: maybe-install-html-utils
+install-html-host: maybe-install-html-gnattools
+
+.PHONY: install-html-target
+
+install-html-target: maybe-install-html-target-libstdc++-v3
+install-html-target: maybe-install-html-target-libmudflap
+install-html-target: maybe-install-html-target-libssp
+install-html-target: maybe-install-html-target-libgcc-math
+install-html-target: maybe-install-html-target-newlib
+install-html-target: maybe-install-html-target-libgfortran
+install-html-target: maybe-install-html-target-libobjc
+install-html-target: maybe-install-html-target-libtermcap
+install-html-target: maybe-install-html-target-winsup
+install-html-target: maybe-install-html-target-libgloss
+install-html-target: maybe-install-html-target-libiberty
+install-html-target: maybe-install-html-target-gperf
+install-html-target: maybe-install-html-target-examples
+install-html-target: maybe-install-html-target-libffi
+install-html-target: maybe-install-html-target-libjava
+install-html-target: maybe-install-html-target-zlib
+install-html-target: maybe-install-html-target-boehm-gc
+install-html-target: maybe-install-html-target-qthreads
+install-html-target: maybe-install-html-target-rda
+install-html-target: maybe-install-html-target-libada
+install-html-target: maybe-install-html-target-libgomp
+
 .PHONY: do-installcheck
 do-installcheck:
        @: $(MAKE); $(unstage)
@@ -1816,7 +1926,7 @@ maintainer-clean-target: maybe-maintainer-clean-target-libgomp
 
 # Here are the targets which correspond to the do-X targets.
 
-.PHONY: info installcheck dvi html install-info
+.PHONY: info installcheck dvi html install-info install-html
 .PHONY: clean distclean mostlyclean maintainer-clean realclean
 .PHONY: local-clean local-distclean local-maintainer-clean
 info: do-info
@@ -1834,6 +1944,8 @@ install-info: do-install-info dir.info
          $(INSTALL_DATA) dir.info $(DESTDIR)$(infodir)/dir.info ; \
        else true ; fi
 
+install-html: do-install-html
+
 local-clean:
        -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log
 
@@ -2783,6 +2895,33 @@ install-info-ash: \
 
 @endif ash
 
+.PHONY: maybe-install-html-ash install-html-ash
+maybe-install-html-ash:
+@if ash
+maybe-install-html-ash: install-html-ash
+
+install-html-ash: \
+    configure-ash \
+    html-ash 
+       @: $(MAKE); $(unstage)
+       @[ -f ./ash/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in ash" ; \
+       (cd $(HOST_SUBDIR)/ash && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif ash
+
 .PHONY: maybe-installcheck-ash installcheck-ash
 maybe-installcheck-ash:
 @if ash
@@ -3120,6 +3259,33 @@ install-info-autoconf: \
 
 @endif autoconf
 
+.PHONY: maybe-install-html-autoconf install-html-autoconf
+maybe-install-html-autoconf:
+@if autoconf
+maybe-install-html-autoconf: install-html-autoconf
+
+install-html-autoconf: \
+    configure-autoconf \
+    html-autoconf 
+       @: $(MAKE); $(unstage)
+       @[ -f ./autoconf/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in autoconf" ; \
+       (cd $(HOST_SUBDIR)/autoconf && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif autoconf
+
 .PHONY: maybe-installcheck-autoconf installcheck-autoconf
 maybe-installcheck-autoconf:
 @if autoconf
@@ -3457,6 +3623,33 @@ install-info-automake: \
 
 @endif automake
 
+.PHONY: maybe-install-html-automake install-html-automake
+maybe-install-html-automake:
+@if automake
+maybe-install-html-automake: install-html-automake
+
+install-html-automake: \
+    configure-automake \
+    html-automake 
+       @: $(MAKE); $(unstage)
+       @[ -f ./automake/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in automake" ; \
+       (cd $(HOST_SUBDIR)/automake && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif automake
+
 .PHONY: maybe-installcheck-automake installcheck-automake
 maybe-installcheck-automake:
 @if automake
@@ -3794,6 +3987,33 @@ install-info-bash: \
 
 @endif bash
 
+.PHONY: maybe-install-html-bash install-html-bash
+maybe-install-html-bash:
+@if bash
+maybe-install-html-bash: install-html-bash
+
+install-html-bash: \
+    configure-bash \
+    html-bash 
+       @: $(MAKE); $(unstage)
+       @[ -f ./bash/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in bash" ; \
+       (cd $(HOST_SUBDIR)/bash && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif bash
+
 .PHONY: maybe-installcheck-bash installcheck-bash
 maybe-installcheck-bash:
 @if bash
@@ -4483,6 +4703,32 @@ install-info-bfd: \
 
 @endif bfd
 
+.PHONY: maybe-install-html-bfd install-html-bfd
+maybe-install-html-bfd:
+@if bfd
+maybe-install-html-bfd: install-html-bfd
+
+install-html-bfd: \
+    configure-bfd \
+    html-bfd 
+       @[ -f ./bfd/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in bfd" ; \
+       (cd $(HOST_SUBDIR)/bfd && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif bfd
+
 .PHONY: maybe-installcheck-bfd installcheck-bfd
 maybe-installcheck-bfd:
 @if bfd
@@ -5167,6 +5413,32 @@ install-info-opcodes: \
 
 @endif opcodes
 
+.PHONY: maybe-install-html-opcodes install-html-opcodes
+maybe-install-html-opcodes:
+@if opcodes
+maybe-install-html-opcodes: install-html-opcodes
+
+install-html-opcodes: \
+    configure-opcodes \
+    html-opcodes 
+       @[ -f ./opcodes/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in opcodes" ; \
+       (cd $(HOST_SUBDIR)/opcodes && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif opcodes
+
 .PHONY: maybe-installcheck-opcodes installcheck-opcodes
 maybe-installcheck-opcodes:
 @if opcodes
@@ -5851,6 +6123,32 @@ install-info-binutils: \
 
 @endif binutils
 
+.PHONY: maybe-install-html-binutils install-html-binutils
+maybe-install-html-binutils:
+@if binutils
+maybe-install-html-binutils: install-html-binutils
+
+install-html-binutils: \
+    configure-binutils \
+    html-binutils 
+       @[ -f ./binutils/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in binutils" ; \
+       (cd $(HOST_SUBDIR)/binutils && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif binutils
+
 .PHONY: maybe-installcheck-binutils installcheck-binutils
 maybe-installcheck-binutils:
 @if binutils
@@ -6186,6 +6484,33 @@ install-info-bison: \
 
 @endif bison
 
+.PHONY: maybe-install-html-bison install-html-bison
+maybe-install-html-bison:
+@if bison
+maybe-install-html-bison: install-html-bison
+
+install-html-bison: \
+    configure-bison \
+    html-bison 
+       @: $(MAKE); $(unstage)
+       @[ -f ./bison/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in bison" ; \
+       (cd $(HOST_SUBDIR)/bison && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif bison
+
 .PHONY: maybe-installcheck-bison installcheck-bison
 maybe-installcheck-bison:
 @if bison
@@ -6526,6 +6851,33 @@ install-info-byacc: \
 
 @endif byacc
 
+.PHONY: maybe-install-html-byacc install-html-byacc
+maybe-install-html-byacc:
+@if byacc
+maybe-install-html-byacc: install-html-byacc
+
+install-html-byacc: \
+    configure-byacc \
+    html-byacc 
+       @: $(MAKE); $(unstage)
+       @[ -f ./byacc/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in byacc" ; \
+       (cd $(HOST_SUBDIR)/byacc && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif byacc
+
 .PHONY: maybe-installcheck-byacc installcheck-byacc
 maybe-installcheck-byacc:
 @if byacc
@@ -6863,6 +7215,33 @@ install-info-bzip2: \
 
 @endif bzip2
 
+.PHONY: maybe-install-html-bzip2 install-html-bzip2
+maybe-install-html-bzip2:
+@if bzip2
+maybe-install-html-bzip2: install-html-bzip2
+
+install-html-bzip2: \
+    configure-bzip2 \
+    html-bzip2 
+       @: $(MAKE); $(unstage)
+       @[ -f ./bzip2/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in bzip2" ; \
+       (cd $(HOST_SUBDIR)/bzip2 && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif bzip2
+
 .PHONY: maybe-installcheck-bzip2 installcheck-bzip2
 maybe-installcheck-bzip2:
 @if bzip2
@@ -7200,6 +7579,33 @@ install-info-dejagnu: \
 
 @endif dejagnu
 
+.PHONY: maybe-install-html-dejagnu install-html-dejagnu
+maybe-install-html-dejagnu:
+@if dejagnu
+maybe-install-html-dejagnu: install-html-dejagnu
+
+install-html-dejagnu: \
+    configure-dejagnu \
+    html-dejagnu 
+       @: $(MAKE); $(unstage)
+       @[ -f ./dejagnu/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in dejagnu" ; \
+       (cd $(HOST_SUBDIR)/dejagnu && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif dejagnu
+
 .PHONY: maybe-installcheck-dejagnu installcheck-dejagnu
 maybe-installcheck-dejagnu:
 @if dejagnu
@@ -7537,6 +7943,33 @@ install-info-diff: \
 
 @endif diff
 
+.PHONY: maybe-install-html-diff install-html-diff
+maybe-install-html-diff:
+@if diff
+maybe-install-html-diff: install-html-diff
+
+install-html-diff: \
+    configure-diff \
+    html-diff 
+       @: $(MAKE); $(unstage)
+       @[ -f ./diff/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in diff" ; \
+       (cd $(HOST_SUBDIR)/diff && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif diff
+
 .PHONY: maybe-installcheck-diff installcheck-diff
 maybe-installcheck-diff:
 @if diff
@@ -7868,6 +8301,33 @@ install-info-dosutils: \
 
 @endif dosutils
 
+.PHONY: maybe-install-html-dosutils install-html-dosutils
+maybe-install-html-dosutils:
+@if dosutils
+maybe-install-html-dosutils: install-html-dosutils
+
+install-html-dosutils: \
+    configure-dosutils \
+    html-dosutils 
+       @: $(MAKE); $(unstage)
+       @[ -f ./dosutils/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in dosutils" ; \
+       (cd $(HOST_SUBDIR)/dosutils && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif dosutils
+
 .PHONY: maybe-installcheck-dosutils installcheck-dosutils
 maybe-installcheck-dosutils:
 @if dosutils
@@ -8205,6 +8665,33 @@ install-info-etc: \
 
 @endif etc
 
+.PHONY: maybe-install-html-etc install-html-etc
+maybe-install-html-etc:
+@if etc
+maybe-install-html-etc: install-html-etc
+
+install-html-etc: \
+    configure-etc \
+    html-etc 
+       @: $(MAKE); $(unstage)
+       @[ -f ./etc/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in etc" ; \
+       (cd $(HOST_SUBDIR)/etc && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif etc
+
 .PHONY: maybe-installcheck-etc installcheck-etc
 maybe-installcheck-etc:
 @if etc
@@ -8545,6 +9032,33 @@ install-info-fastjar: \
 
 @endif fastjar
 
+.PHONY: maybe-install-html-fastjar install-html-fastjar
+maybe-install-html-fastjar:
+@if fastjar
+maybe-install-html-fastjar: install-html-fastjar
+
+install-html-fastjar: \
+    configure-fastjar \
+    html-fastjar 
+       @: $(MAKE); $(unstage)
+       @[ -f ./fastjar/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in fastjar" ; \
+       (cd $(HOST_SUBDIR)/fastjar && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif fastjar
+
 .PHONY: maybe-installcheck-fastjar installcheck-fastjar
 maybe-installcheck-fastjar:
 @if fastjar
@@ -8882,6 +9396,33 @@ install-info-fileutils: \
 
 @endif fileutils
 
+.PHONY: maybe-install-html-fileutils install-html-fileutils
+maybe-install-html-fileutils:
+@if fileutils
+maybe-install-html-fileutils: install-html-fileutils
+
+install-html-fileutils: \
+    configure-fileutils \
+    html-fileutils 
+       @: $(MAKE); $(unstage)
+       @[ -f ./fileutils/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in fileutils" ; \
+       (cd $(HOST_SUBDIR)/fileutils && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif fileutils
+
 .PHONY: maybe-installcheck-fileutils installcheck-fileutils
 maybe-installcheck-fileutils:
 @if fileutils
@@ -9219,6 +9760,33 @@ install-info-findutils: \
 
 @endif findutils
 
+.PHONY: maybe-install-html-findutils install-html-findutils
+maybe-install-html-findutils:
+@if findutils
+maybe-install-html-findutils: install-html-findutils
+
+install-html-findutils: \
+    configure-findutils \
+    html-findutils 
+       @: $(MAKE); $(unstage)
+       @[ -f ./findutils/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in findutils" ; \
+       (cd $(HOST_SUBDIR)/findutils && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif findutils
+
 .PHONY: maybe-installcheck-findutils installcheck-findutils
 maybe-installcheck-findutils:
 @if findutils
@@ -9556,6 +10124,33 @@ install-info-find: \
 
 @endif find
 
+.PHONY: maybe-install-html-find install-html-find
+maybe-install-html-find:
+@if find
+maybe-install-html-find: install-html-find
+
+install-html-find: \
+    configure-find \
+    html-find 
+       @: $(MAKE); $(unstage)
+       @[ -f ./find/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in find" ; \
+       (cd $(HOST_SUBDIR)/find && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif find
+
 .PHONY: maybe-installcheck-find installcheck-find
 maybe-installcheck-find:
 @if find
@@ -9828,6 +10423,33 @@ install-info-fixincludes:
 
 @endif fixincludes
 
+.PHONY: maybe-install-html-fixincludes install-html-fixincludes
+maybe-install-html-fixincludes:
+@if fixincludes
+maybe-install-html-fixincludes: install-html-fixincludes
+
+install-html-fixincludes: \
+    configure-fixincludes \
+    html-fixincludes 
+       @: $(MAKE); $(unstage)
+       @[ -f ./fixincludes/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in fixincludes" ; \
+       (cd $(HOST_SUBDIR)/fixincludes && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif fixincludes
+
 .PHONY: maybe-installcheck-fixincludes installcheck-fixincludes
 maybe-installcheck-fixincludes:
 @if fixincludes
@@ -10152,6 +10774,33 @@ install-info-flex: \
 
 @endif flex
 
+.PHONY: maybe-install-html-flex install-html-flex
+maybe-install-html-flex:
+@if flex
+maybe-install-html-flex: install-html-flex
+
+install-html-flex: \
+    configure-flex \
+    html-flex 
+       @: $(MAKE); $(unstage)
+       @[ -f ./flex/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in flex" ; \
+       (cd $(HOST_SUBDIR)/flex && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif flex
+
 .PHONY: maybe-installcheck-flex installcheck-flex
 maybe-installcheck-flex:
 @if flex
@@ -10841,6 +11490,32 @@ install-info-gas: \
 
 @endif gas
 
+.PHONY: maybe-install-html-gas install-html-gas
+maybe-install-html-gas:
+@if gas
+maybe-install-html-gas: install-html-gas
+
+install-html-gas: \
+    configure-gas \
+    html-gas 
+       @[ -f ./gas/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in gas" ; \
+       (cd $(HOST_SUBDIR)/gas && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif gas
+
 .PHONY: maybe-installcheck-gas installcheck-gas
 maybe-installcheck-gas:
 @if gas
@@ -11525,6 +12200,32 @@ install-info-gcc: \
 
 @endif gcc
 
+.PHONY: maybe-install-html-gcc install-html-gcc
+maybe-install-html-gcc:
+@if gcc
+maybe-install-html-gcc: install-html-gcc
+
+install-html-gcc: \
+    configure-gcc \
+    html-gcc 
+       @[ -f ./gcc/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) $(EXTRA_GCC_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in gcc" ; \
+       (cd $(HOST_SUBDIR)/gcc && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif gcc
+
 .PHONY: maybe-installcheck-gcc installcheck-gcc
 maybe-installcheck-gcc:
 @if gcc
@@ -11857,6 +12558,33 @@ install-info-gawk: \
 
 @endif gawk
 
+.PHONY: maybe-install-html-gawk install-html-gawk
+maybe-install-html-gawk:
+@if gawk
+maybe-install-html-gawk: install-html-gawk
+
+install-html-gawk: \
+    configure-gawk \
+    html-gawk 
+       @: $(MAKE); $(unstage)
+       @[ -f ./gawk/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in gawk" ; \
+       (cd $(HOST_SUBDIR)/gawk && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif gawk
+
 .PHONY: maybe-installcheck-gawk installcheck-gawk
 maybe-installcheck-gawk:
 @if gawk
@@ -12194,6 +12922,33 @@ install-info-gettext: \
 
 @endif gettext
 
+.PHONY: maybe-install-html-gettext install-html-gettext
+maybe-install-html-gettext:
+@if gettext
+maybe-install-html-gettext: install-html-gettext
+
+install-html-gettext: \
+    configure-gettext \
+    html-gettext 
+       @: $(MAKE); $(unstage)
+       @[ -f ./gettext/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in gettext" ; \
+       (cd $(HOST_SUBDIR)/gettext && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif gettext
+
 .PHONY: maybe-installcheck-gettext installcheck-gettext
 maybe-installcheck-gettext:
 @if gettext
@@ -12531,6 +13286,33 @@ install-info-gnuserv: \
 
 @endif gnuserv
 
+.PHONY: maybe-install-html-gnuserv install-html-gnuserv
+maybe-install-html-gnuserv:
+@if gnuserv
+maybe-install-html-gnuserv: install-html-gnuserv
+
+install-html-gnuserv: \
+    configure-gnuserv \
+    html-gnuserv 
+       @: $(MAKE); $(unstage)
+       @[ -f ./gnuserv/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in gnuserv" ; \
+       (cd $(HOST_SUBDIR)/gnuserv && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif gnuserv
+
 .PHONY: maybe-installcheck-gnuserv installcheck-gnuserv
 maybe-installcheck-gnuserv:
 @if gnuserv
@@ -12868,6 +13650,33 @@ install-info-gprof: \
 
 @endif gprof
 
+.PHONY: maybe-install-html-gprof install-html-gprof
+maybe-install-html-gprof:
+@if gprof
+maybe-install-html-gprof: install-html-gprof
+
+install-html-gprof: \
+    configure-gprof \
+    html-gprof 
+       @: $(MAKE); $(unstage)
+       @[ -f ./gprof/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in gprof" ; \
+       (cd $(HOST_SUBDIR)/gprof && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif gprof
+
 .PHONY: maybe-installcheck-gprof installcheck-gprof
 maybe-installcheck-gprof:
 @if gprof
@@ -13205,6 +14014,33 @@ install-info-gzip: \
 
 @endif gzip
 
+.PHONY: maybe-install-html-gzip install-html-gzip
+maybe-install-html-gzip:
+@if gzip
+maybe-install-html-gzip: install-html-gzip
+
+install-html-gzip: \
+    configure-gzip \
+    html-gzip 
+       @: $(MAKE); $(unstage)
+       @[ -f ./gzip/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in gzip" ; \
+       (cd $(HOST_SUBDIR)/gzip && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif gzip
+
 .PHONY: maybe-installcheck-gzip installcheck-gzip
 maybe-installcheck-gzip:
 @if gzip
@@ -13542,6 +14378,33 @@ install-info-hello: \
 
 @endif hello
 
+.PHONY: maybe-install-html-hello install-html-hello
+maybe-install-html-hello:
+@if hello
+maybe-install-html-hello: install-html-hello
+
+install-html-hello: \
+    configure-hello \
+    html-hello 
+       @: $(MAKE); $(unstage)
+       @[ -f ./hello/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in hello" ; \
+       (cd $(HOST_SUBDIR)/hello && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif hello
+
 .PHONY: maybe-installcheck-hello installcheck-hello
 maybe-installcheck-hello:
 @if hello
@@ -13879,6 +14742,33 @@ install-info-indent: \
 
 @endif indent
 
+.PHONY: maybe-install-html-indent install-html-indent
+maybe-install-html-indent:
+@if indent
+maybe-install-html-indent: install-html-indent
+
+install-html-indent: \
+    configure-indent \
+    html-indent 
+       @: $(MAKE); $(unstage)
+       @[ -f ./indent/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in indent" ; \
+       (cd $(HOST_SUBDIR)/indent && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif indent
+
 .PHONY: maybe-installcheck-indent installcheck-indent
 maybe-installcheck-indent:
 @if indent
@@ -14568,6 +15458,32 @@ install-info-intl: \
 
 @endif intl
 
+.PHONY: maybe-install-html-intl install-html-intl
+maybe-install-html-intl:
+@if intl
+maybe-install-html-intl: install-html-intl
+
+install-html-intl: \
+    configure-intl \
+    html-intl 
+       @[ -f ./intl/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in intl" ; \
+       (cd $(HOST_SUBDIR)/intl && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif intl
+
 .PHONY: maybe-installcheck-intl installcheck-intl
 maybe-installcheck-intl:
 @if intl
@@ -14900,6 +15816,33 @@ install-info-tcl: \
 
 @endif tcl
 
+.PHONY: maybe-install-html-tcl install-html-tcl
+maybe-install-html-tcl:
+@if tcl
+maybe-install-html-tcl: install-html-tcl
+
+install-html-tcl: \
+    configure-tcl \
+    html-tcl 
+       @: $(MAKE); $(unstage)
+       @[ -f ./tcl/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in tcl" ; \
+       (cd $(HOST_SUBDIR)/tcl && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif tcl
+
 .PHONY: maybe-installcheck-tcl installcheck-tcl
 maybe-installcheck-tcl:
 @if tcl
@@ -15222,6 +16165,33 @@ install-info-itcl: \
 
 @endif itcl
 
+.PHONY: maybe-install-html-itcl install-html-itcl
+maybe-install-html-itcl:
+@if itcl
+maybe-install-html-itcl: install-html-itcl
+
+install-html-itcl: \
+    configure-itcl \
+    html-itcl 
+       @: $(MAKE); $(unstage)
+       @[ -f ./itcl/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in itcl" ; \
+       (cd $(HOST_SUBDIR)/itcl && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif itcl
+
 .PHONY: maybe-installcheck-itcl installcheck-itcl
 maybe-installcheck-itcl:
 @if itcl
@@ -15911,6 +16881,32 @@ install-info-ld: \
 
 @endif ld
 
+.PHONY: maybe-install-html-ld install-html-ld
+maybe-install-html-ld:
+@if ld
+maybe-install-html-ld: install-html-ld
+
+install-html-ld: \
+    configure-ld \
+    html-ld 
+       @[ -f ./ld/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in ld" ; \
+       (cd $(HOST_SUBDIR)/ld && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif ld
+
 .PHONY: maybe-installcheck-ld installcheck-ld
 maybe-installcheck-ld:
 @if ld
@@ -16595,6 +17591,32 @@ install-info-libcpp: \
 
 @endif libcpp
 
+.PHONY: maybe-install-html-libcpp install-html-libcpp
+maybe-install-html-libcpp:
+@if libcpp
+maybe-install-html-libcpp: install-html-libcpp
+
+install-html-libcpp: \
+    configure-libcpp \
+    html-libcpp 
+       @[ -f ./libcpp/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in libcpp" ; \
+       (cd $(HOST_SUBDIR)/libcpp && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif libcpp
+
 .PHONY: maybe-installcheck-libcpp installcheck-libcpp
 maybe-installcheck-libcpp:
 @if libcpp
@@ -17279,6 +18301,32 @@ install-info-libdecnumber: \
 
 @endif libdecnumber
 
+.PHONY: maybe-install-html-libdecnumber install-html-libdecnumber
+maybe-install-html-libdecnumber:
+@if libdecnumber
+maybe-install-html-libdecnumber: install-html-libdecnumber
+
+install-html-libdecnumber: \
+    configure-libdecnumber \
+    html-libdecnumber 
+       @[ -f ./libdecnumber/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in libdecnumber" ; \
+       (cd $(HOST_SUBDIR)/libdecnumber && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif libdecnumber
+
 .PHONY: maybe-installcheck-libdecnumber installcheck-libdecnumber
 maybe-installcheck-libdecnumber:
 @if libdecnumber
@@ -17611,6 +18659,33 @@ install-info-libgui: \
 
 @endif libgui
 
+.PHONY: maybe-install-html-libgui install-html-libgui
+maybe-install-html-libgui:
+@if libgui
+maybe-install-html-libgui: install-html-libgui
+
+install-html-libgui: \
+    configure-libgui \
+    html-libgui 
+       @: $(MAKE); $(unstage)
+       @[ -f ./libgui/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in libgui" ; \
+       (cd $(HOST_SUBDIR)/libgui && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif libgui
+
 .PHONY: maybe-installcheck-libgui installcheck-libgui
 maybe-installcheck-libgui:
 @if libgui
@@ -18300,6 +19375,32 @@ install-info-libiberty: \
 
 @endif libiberty
 
+.PHONY: maybe-install-html-libiberty install-html-libiberty
+maybe-install-html-libiberty:
+@if libiberty
+maybe-install-html-libiberty: install-html-libiberty
+
+install-html-libiberty: \
+    configure-libiberty \
+    html-libiberty 
+       @[ -f ./libiberty/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in libiberty" ; \
+       (cd $(HOST_SUBDIR)/libiberty && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif libiberty
+
 .PHONY: maybe-installcheck-libiberty installcheck-libiberty
 maybe-installcheck-libiberty:
 @if libiberty
@@ -18632,6 +19733,33 @@ install-info-libtool: \
 
 @endif libtool
 
+.PHONY: maybe-install-html-libtool install-html-libtool
+maybe-install-html-libtool:
+@if libtool
+maybe-install-html-libtool: install-html-libtool
+
+install-html-libtool: \
+    configure-libtool \
+    html-libtool 
+       @: $(MAKE); $(unstage)
+       @[ -f ./libtool/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in libtool" ; \
+       (cd $(HOST_SUBDIR)/libtool && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif libtool
+
 .PHONY: maybe-installcheck-libtool installcheck-libtool
 maybe-installcheck-libtool:
 @if libtool
@@ -18969,6 +20097,33 @@ install-info-m4: \
 
 @endif m4
 
+.PHONY: maybe-install-html-m4 install-html-m4
+maybe-install-html-m4:
+@if m4
+maybe-install-html-m4: install-html-m4
+
+install-html-m4: \
+    configure-m4 \
+    html-m4 
+       @: $(MAKE); $(unstage)
+       @[ -f ./m4/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in m4" ; \
+       (cd $(HOST_SUBDIR)/m4 && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif m4
+
 .PHONY: maybe-installcheck-m4 installcheck-m4
 maybe-installcheck-m4:
 @if m4
@@ -19306,6 +20461,33 @@ install-info-make: \
 
 @endif make
 
+.PHONY: maybe-install-html-make install-html-make
+maybe-install-html-make:
+@if make
+maybe-install-html-make: install-html-make
+
+install-html-make: \
+    configure-make \
+    html-make 
+       @: $(MAKE); $(unstage)
+       @[ -f ./make/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in make" ; \
+       (cd $(HOST_SUBDIR)/make && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif make
+
 .PHONY: maybe-installcheck-make installcheck-make
 maybe-installcheck-make:
 @if make
@@ -19637,6 +20819,33 @@ install-info-mmalloc: \
 
 @endif mmalloc
 
+.PHONY: maybe-install-html-mmalloc install-html-mmalloc
+maybe-install-html-mmalloc:
+@if mmalloc
+maybe-install-html-mmalloc: install-html-mmalloc
+
+install-html-mmalloc: \
+    configure-mmalloc \
+    html-mmalloc 
+       @: $(MAKE); $(unstage)
+       @[ -f ./mmalloc/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in mmalloc" ; \
+       (cd $(HOST_SUBDIR)/mmalloc && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif mmalloc
+
 .PHONY: maybe-installcheck-mmalloc installcheck-mmalloc
 maybe-installcheck-mmalloc:
 @if mmalloc
@@ -19974,6 +21183,33 @@ install-info-patch: \
 
 @endif patch
 
+.PHONY: maybe-install-html-patch install-html-patch
+maybe-install-html-patch:
+@if patch
+maybe-install-html-patch: install-html-patch
+
+install-html-patch: \
+    configure-patch \
+    html-patch 
+       @: $(MAKE); $(unstage)
+       @[ -f ./patch/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in patch" ; \
+       (cd $(HOST_SUBDIR)/patch && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif patch
+
 .PHONY: maybe-installcheck-patch installcheck-patch
 maybe-installcheck-patch:
 @if patch
@@ -20311,6 +21547,33 @@ install-info-perl: \
 
 @endif perl
 
+.PHONY: maybe-install-html-perl install-html-perl
+maybe-install-html-perl:
+@if perl
+maybe-install-html-perl: install-html-perl
+
+install-html-perl: \
+    configure-perl \
+    html-perl 
+       @: $(MAKE); $(unstage)
+       @[ -f ./perl/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in perl" ; \
+       (cd $(HOST_SUBDIR)/perl && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif perl
+
 .PHONY: maybe-installcheck-perl installcheck-perl
 maybe-installcheck-perl:
 @if perl
@@ -20648,6 +21911,33 @@ install-info-prms: \
 
 @endif prms
 
+.PHONY: maybe-install-html-prms install-html-prms
+maybe-install-html-prms:
+@if prms
+maybe-install-html-prms: install-html-prms
+
+install-html-prms: \
+    configure-prms \
+    html-prms 
+       @: $(MAKE); $(unstage)
+       @[ -f ./prms/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in prms" ; \
+       (cd $(HOST_SUBDIR)/prms && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif prms
+
 .PHONY: maybe-installcheck-prms installcheck-prms
 maybe-installcheck-prms:
 @if prms
@@ -20985,6 +22275,33 @@ install-info-rcs: \
 
 @endif rcs
 
+.PHONY: maybe-install-html-rcs install-html-rcs
+maybe-install-html-rcs:
+@if rcs
+maybe-install-html-rcs: install-html-rcs
+
+install-html-rcs: \
+    configure-rcs \
+    html-rcs 
+       @: $(MAKE); $(unstage)
+       @[ -f ./rcs/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in rcs" ; \
+       (cd $(HOST_SUBDIR)/rcs && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif rcs
+
 .PHONY: maybe-installcheck-rcs installcheck-rcs
 maybe-installcheck-rcs:
 @if rcs
@@ -21322,6 +22639,33 @@ install-info-readline: \
 
 @endif readline
 
+.PHONY: maybe-install-html-readline install-html-readline
+maybe-install-html-readline:
+@if readline
+maybe-install-html-readline: install-html-readline
+
+install-html-readline: \
+    configure-readline \
+    html-readline 
+       @: $(MAKE); $(unstage)
+       @[ -f ./readline/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in readline" ; \
+       (cd $(HOST_SUBDIR)/readline && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif readline
+
 .PHONY: maybe-installcheck-readline installcheck-readline
 maybe-installcheck-readline:
 @if readline
@@ -21647,6 +22991,33 @@ install-info-release: \
 
 @endif release
 
+.PHONY: maybe-install-html-release install-html-release
+maybe-install-html-release:
+@if release
+maybe-install-html-release: install-html-release
+
+install-html-release: \
+    configure-release \
+    html-release 
+       @: $(MAKE); $(unstage)
+       @[ -f ./release/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in release" ; \
+       (cd $(HOST_SUBDIR)/release && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif release
+
 .PHONY: maybe-installcheck-release installcheck-release
 maybe-installcheck-release:
 @if release
@@ -21984,6 +23355,33 @@ install-info-recode: \
 
 @endif recode
 
+.PHONY: maybe-install-html-recode install-html-recode
+maybe-install-html-recode:
+@if recode
+maybe-install-html-recode: install-html-recode
+
+install-html-recode: \
+    configure-recode \
+    html-recode 
+       @: $(MAKE); $(unstage)
+       @[ -f ./recode/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in recode" ; \
+       (cd $(HOST_SUBDIR)/recode && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif recode
+
 .PHONY: maybe-installcheck-recode installcheck-recode
 maybe-installcheck-recode:
 @if recode
@@ -22321,6 +23719,33 @@ install-info-sed: \
 
 @endif sed
 
+.PHONY: maybe-install-html-sed install-html-sed
+maybe-install-html-sed:
+@if sed
+maybe-install-html-sed: install-html-sed
+
+install-html-sed: \
+    configure-sed \
+    html-sed 
+       @: $(MAKE); $(unstage)
+       @[ -f ./sed/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in sed" ; \
+       (cd $(HOST_SUBDIR)/sed && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif sed
+
 .PHONY: maybe-installcheck-sed installcheck-sed
 maybe-installcheck-sed:
 @if sed
@@ -22658,6 +24083,33 @@ install-info-send-pr: \
 
 @endif send-pr
 
+.PHONY: maybe-install-html-send-pr install-html-send-pr
+maybe-install-html-send-pr:
+@if send-pr
+maybe-install-html-send-pr: install-html-send-pr
+
+install-html-send-pr: \
+    configure-send-pr \
+    html-send-pr 
+       @: $(MAKE); $(unstage)
+       @[ -f ./send-pr/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in send-pr" ; \
+       (cd $(HOST_SUBDIR)/send-pr && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif send-pr
+
 .PHONY: maybe-installcheck-send-pr installcheck-send-pr
 maybe-installcheck-send-pr:
 @if send-pr
@@ -22995,6 +24447,33 @@ install-info-shellutils: \
 
 @endif shellutils
 
+.PHONY: maybe-install-html-shellutils install-html-shellutils
+maybe-install-html-shellutils:
+@if shellutils
+maybe-install-html-shellutils: install-html-shellutils
+
+install-html-shellutils: \
+    configure-shellutils \
+    html-shellutils 
+       @: $(MAKE); $(unstage)
+       @[ -f ./shellutils/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in shellutils" ; \
+       (cd $(HOST_SUBDIR)/shellutils && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif shellutils
+
 .PHONY: maybe-installcheck-shellutils installcheck-shellutils
 maybe-installcheck-shellutils:
 @if shellutils
@@ -23332,6 +24811,33 @@ install-info-sid: \
 
 @endif sid
 
+.PHONY: maybe-install-html-sid install-html-sid
+maybe-install-html-sid:
+@if sid
+maybe-install-html-sid: install-html-sid
+
+install-html-sid: \
+    configure-sid \
+    html-sid 
+       @: $(MAKE); $(unstage)
+       @[ -f ./sid/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in sid" ; \
+       (cd $(HOST_SUBDIR)/sid && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif sid
+
 .PHONY: maybe-installcheck-sid installcheck-sid
 maybe-installcheck-sid:
 @if sid
@@ -23669,6 +25175,33 @@ install-info-sim: \
 
 @endif sim
 
+.PHONY: maybe-install-html-sim install-html-sim
+maybe-install-html-sim:
+@if sim
+maybe-install-html-sim: install-html-sim
+
+install-html-sim: \
+    configure-sim \
+    html-sim 
+       @: $(MAKE); $(unstage)
+       @[ -f ./sim/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in sim" ; \
+       (cd $(HOST_SUBDIR)/sim && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif sim
+
 .PHONY: maybe-installcheck-sim installcheck-sim
 maybe-installcheck-sim:
 @if sim
@@ -24006,6 +25539,33 @@ install-info-tar: \
 
 @endif tar
 
+.PHONY: maybe-install-html-tar install-html-tar
+maybe-install-html-tar:
+@if tar
+maybe-install-html-tar: install-html-tar
+
+install-html-tar: \
+    configure-tar \
+    html-tar 
+       @: $(MAKE); $(unstage)
+       @[ -f ./tar/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in tar" ; \
+       (cd $(HOST_SUBDIR)/tar && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif tar
+
 .PHONY: maybe-installcheck-tar installcheck-tar
 maybe-installcheck-tar:
 @if tar
@@ -24337,6 +25897,33 @@ install-info-texinfo: \
 
 @endif texinfo
 
+.PHONY: maybe-install-html-texinfo install-html-texinfo
+maybe-install-html-texinfo:
+@if texinfo
+maybe-install-html-texinfo: install-html-texinfo
+
+install-html-texinfo: \
+    configure-texinfo \
+    html-texinfo 
+       @: $(MAKE); $(unstage)
+       @[ -f ./texinfo/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in texinfo" ; \
+       (cd $(HOST_SUBDIR)/texinfo && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif texinfo
+
 .PHONY: maybe-installcheck-texinfo installcheck-texinfo
 maybe-installcheck-texinfo:
 @if texinfo
@@ -24674,6 +26261,33 @@ install-info-textutils: \
 
 @endif textutils
 
+.PHONY: maybe-install-html-textutils install-html-textutils
+maybe-install-html-textutils:
+@if textutils
+maybe-install-html-textutils: install-html-textutils
+
+install-html-textutils: \
+    configure-textutils \
+    html-textutils 
+       @: $(MAKE); $(unstage)
+       @[ -f ./textutils/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in textutils" ; \
+       (cd $(HOST_SUBDIR)/textutils && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif textutils
+
 .PHONY: maybe-installcheck-textutils installcheck-textutils
 maybe-installcheck-textutils:
 @if textutils
@@ -25011,6 +26625,33 @@ install-info-time: \
 
 @endif time
 
+.PHONY: maybe-install-html-time install-html-time
+maybe-install-html-time:
+@if time
+maybe-install-html-time: install-html-time
+
+install-html-time: \
+    configure-time \
+    html-time 
+       @: $(MAKE); $(unstage)
+       @[ -f ./time/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in time" ; \
+       (cd $(HOST_SUBDIR)/time && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif time
+
 .PHONY: maybe-installcheck-time installcheck-time
 maybe-installcheck-time:
 @if time
@@ -25348,6 +26989,33 @@ install-info-uudecode: \
 
 @endif uudecode
 
+.PHONY: maybe-install-html-uudecode install-html-uudecode
+maybe-install-html-uudecode:
+@if uudecode
+maybe-install-html-uudecode: install-html-uudecode
+
+install-html-uudecode: \
+    configure-uudecode \
+    html-uudecode 
+       @: $(MAKE); $(unstage)
+       @[ -f ./uudecode/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in uudecode" ; \
+       (cd $(HOST_SUBDIR)/uudecode && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif uudecode
+
 .PHONY: maybe-installcheck-uudecode installcheck-uudecode
 maybe-installcheck-uudecode:
 @if uudecode
@@ -25685,6 +27353,33 @@ install-info-wdiff: \
 
 @endif wdiff
 
+.PHONY: maybe-install-html-wdiff install-html-wdiff
+maybe-install-html-wdiff:
+@if wdiff
+maybe-install-html-wdiff: install-html-wdiff
+
+install-html-wdiff: \
+    configure-wdiff \
+    html-wdiff 
+       @: $(MAKE); $(unstage)
+       @[ -f ./wdiff/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in wdiff" ; \
+       (cd $(HOST_SUBDIR)/wdiff && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif wdiff
+
 .PHONY: maybe-installcheck-wdiff installcheck-wdiff
 maybe-installcheck-wdiff:
 @if wdiff
@@ -26025,6 +27720,33 @@ install-info-zip: \
 
 @endif zip
 
+.PHONY: maybe-install-html-zip install-html-zip
+maybe-install-html-zip:
+@if zip
+maybe-install-html-zip: install-html-zip
+
+install-html-zip: \
+    configure-zip \
+    html-zip 
+       @: $(MAKE); $(unstage)
+       @[ -f ./zip/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in zip" ; \
+       (cd $(HOST_SUBDIR)/zip && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif zip
+
 .PHONY: maybe-installcheck-zip installcheck-zip
 maybe-installcheck-zip:
 @if zip
@@ -26702,6 +28424,32 @@ install-info-zlib: \
 
 @endif zlib
 
+.PHONY: maybe-install-html-zlib install-html-zlib
+maybe-install-html-zlib:
+@if zlib
+maybe-install-html-zlib: install-html-zlib
+
+install-html-zlib: \
+    configure-zlib \
+    html-zlib 
+       @[ -f ./zlib/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in zlib" ; \
+       (cd $(HOST_SUBDIR)/zlib && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif zlib
+
 .PHONY: maybe-installcheck-zlib installcheck-zlib
 maybe-installcheck-zlib:
 @if zlib
@@ -27034,6 +28782,33 @@ install-info-gdb: \
 
 @endif gdb
 
+.PHONY: maybe-install-html-gdb install-html-gdb
+maybe-install-html-gdb:
+@if gdb
+maybe-install-html-gdb: install-html-gdb
+
+install-html-gdb: \
+    configure-gdb \
+    html-gdb 
+       @: $(MAKE); $(unstage)
+       @[ -f ./gdb/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) $(X11_FLAGS_TO_PASS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in gdb" ; \
+       (cd $(HOST_SUBDIR)/gdb && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif gdb
+
 .PHONY: maybe-installcheck-gdb installcheck-gdb
 maybe-installcheck-gdb:
 @if gdb
@@ -27371,6 +29146,33 @@ install-info-expect: \
 
 @endif expect
 
+.PHONY: maybe-install-html-expect install-html-expect
+maybe-install-html-expect:
+@if expect
+maybe-install-html-expect: install-html-expect
+
+install-html-expect: \
+    configure-expect \
+    html-expect 
+       @: $(MAKE); $(unstage)
+       @[ -f ./expect/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) $(X11_FLAGS_TO_PASS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in expect" ; \
+       (cd $(HOST_SUBDIR)/expect && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif expect
+
 .PHONY: maybe-installcheck-expect installcheck-expect
 maybe-installcheck-expect:
 @if expect
@@ -27708,6 +29510,33 @@ install-info-guile: \
 
 @endif guile
 
+.PHONY: maybe-install-html-guile install-html-guile
+maybe-install-html-guile:
+@if guile
+maybe-install-html-guile: install-html-guile
+
+install-html-guile: \
+    configure-guile \
+    html-guile 
+       @: $(MAKE); $(unstage)
+       @[ -f ./guile/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) $(X11_FLAGS_TO_PASS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in guile" ; \
+       (cd $(HOST_SUBDIR)/guile && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif guile
+
 .PHONY: maybe-installcheck-guile installcheck-guile
 maybe-installcheck-guile:
 @if guile
@@ -28045,6 +29874,33 @@ install-info-tk: \
 
 @endif tk
 
+.PHONY: maybe-install-html-tk install-html-tk
+maybe-install-html-tk:
+@if tk
+maybe-install-html-tk: install-html-tk
+
+install-html-tk: \
+    configure-tk \
+    html-tk 
+       @: $(MAKE); $(unstage)
+       @[ -f ./tk/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) $(X11_FLAGS_TO_PASS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in tk" ; \
+       (cd $(HOST_SUBDIR)/tk && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif tk
+
 .PHONY: maybe-installcheck-tk installcheck-tk
 maybe-installcheck-tk:
 @if tk
@@ -28376,6 +30232,33 @@ install-info-libtermcap: \
 
 @endif libtermcap
 
+.PHONY: maybe-install-html-libtermcap install-html-libtermcap
+maybe-install-html-libtermcap:
+@if libtermcap
+maybe-install-html-libtermcap: install-html-libtermcap
+
+install-html-libtermcap: \
+    configure-libtermcap \
+    html-libtermcap 
+       @: $(MAKE); $(unstage)
+       @[ -f ./libtermcap/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in libtermcap" ; \
+       (cd $(HOST_SUBDIR)/libtermcap && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif libtermcap
+
 .PHONY: maybe-installcheck-libtermcap installcheck-libtermcap
 maybe-installcheck-libtermcap:
 @if libtermcap
@@ -28647,6 +30530,33 @@ install-info-utils: \
 
 @endif utils
 
+.PHONY: maybe-install-html-utils install-html-utils
+maybe-install-html-utils:
+@if utils
+maybe-install-html-utils: install-html-utils
+
+install-html-utils: \
+    configure-utils \
+    html-utils 
+       @: $(MAKE); $(unstage)
+       @[ -f ./utils/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in utils" ; \
+       (cd $(HOST_SUBDIR)/utils && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif utils
+
 .PHONY: maybe-installcheck-utils installcheck-utils
 maybe-installcheck-utils:
 @if utils
@@ -28984,6 +30894,33 @@ install-info-gnattools: \
 
 @endif gnattools
 
+.PHONY: maybe-install-html-gnattools install-html-gnattools
+maybe-install-html-gnattools:
+@if gnattools
+maybe-install-html-gnattools: install-html-gnattools
+
+install-html-gnattools: \
+    configure-gnattools \
+    html-gnattools 
+       @: $(MAKE); $(unstage)
+       @[ -f ./gnattools/Makefile ] || exit 0; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(HOST_EXPORTS) \
+       for flag in $(EXTRA_HOST_FLAGS) ; do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       echo "Doing install-html in gnattools" ; \
+       (cd $(HOST_SUBDIR)/gnattools && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                 install-html) \
+         || exit 1
+
+@endif gnattools
+
 .PHONY: maybe-installcheck-gnattools installcheck-gnattools
 maybe-installcheck-gnattools:
 @if gnattools
@@ -29343,6 +31280,33 @@ install-info-target-libstdc++-v3: \
 
 @endif target-libstdc++-v3
 
+.PHONY: maybe-install-html-target-libstdc++-v3 install-html-target-libstdc++-v3
+maybe-install-html-target-libstdc++-v3:
+@if target-libstdc++-v3
+maybe-install-html-target-libstdc++-v3: install-html-target-libstdc++-v3
+
+install-html-target-libstdc++-v3: \
+    configure-target-libstdc++-v3 \
+    html-target-libstdc++-v3 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(RAW_CXX_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/libstdc++-v3" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libstdc++-v3 && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-libstdc++-v3
+
 .PHONY: maybe-installcheck-target-libstdc++-v3 installcheck-target-libstdc++-v3
 maybe-installcheck-target-libstdc++-v3:
 @if target-libstdc++-v3
@@ -29697,6 +31661,33 @@ install-info-target-libmudflap: \
 
 @endif target-libmudflap
 
+.PHONY: maybe-install-html-target-libmudflap install-html-target-libmudflap
+maybe-install-html-target-libmudflap:
+@if target-libmudflap
+maybe-install-html-target-libmudflap: install-html-target-libmudflap
+
+install-html-target-libmudflap: \
+    configure-target-libmudflap \
+    html-target-libmudflap 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libmudflap/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/libmudflap" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libmudflap && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-libmudflap
+
 .PHONY: maybe-installcheck-target-libmudflap installcheck-target-libmudflap
 maybe-installcheck-target-libmudflap:
 @if target-libmudflap
@@ -30051,6 +32042,33 @@ install-info-target-libssp: \
 
 @endif target-libssp
 
+.PHONY: maybe-install-html-target-libssp install-html-target-libssp
+maybe-install-html-target-libssp:
+@if target-libssp
+maybe-install-html-target-libssp: install-html-target-libssp
+
+install-html-target-libssp: \
+    configure-target-libssp \
+    html-target-libssp 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libssp/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/libssp" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libssp && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-libssp
+
 .PHONY: maybe-installcheck-target-libssp installcheck-target-libssp
 maybe-installcheck-target-libssp:
 @if target-libssp
@@ -30181,6 +32199,390 @@ maintainer-clean-target-libssp:
 
 
 
+<<<<<<< .mine
+.PHONY: configure-target-libgcc-math maybe-configure-target-libgcc-math
+maybe-configure-target-libgcc-math:
+@if target-libgcc-math
+maybe-configure-target-libgcc-math: configure-target-libgcc-math
+configure-target-libgcc-math: 
+       @: $(MAKE); $(unstage)
+       @r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       echo "Checking multilib configuration for libgcc-math..."; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgcc-math ; \
+       $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libgcc-math/multilib.tmp 2> /dev/null ; \
+       if test -r $(TARGET_SUBDIR)/libgcc-math/multilib.out; then \
+         if cmp -s $(TARGET_SUBDIR)/libgcc-math/multilib.tmp $(TARGET_SUBDIR)/libgcc-math/multilib.out; then \
+           rm -f $(TARGET_SUBDIR)/libgcc-math/multilib.tmp; \
+         else \
+           rm -f $(TARGET_SUBDIR)/libgcc-math/Makefile; \
+           mv $(TARGET_SUBDIR)/libgcc-math/multilib.tmp $(TARGET_SUBDIR)/libgcc-math/multilib.out; \
+         fi; \
+       else \
+         mv $(TARGET_SUBDIR)/libgcc-math/multilib.tmp $(TARGET_SUBDIR)/libgcc-math/multilib.out; \
+       fi; \
+       test ! -f $(TARGET_SUBDIR)/libgcc-math/Makefile || exit 0; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgcc-math ; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo Configuring in $(TARGET_SUBDIR)/libgcc-math; \
+       cd "$(TARGET_SUBDIR)/libgcc-math" || exit 1; \
+       case $(srcdir) in \
+         /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+         *) topdir=`echo $(TARGET_SUBDIR)/libgcc-math/ | \
+               sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+       esac; \
+       srcdiroption="--srcdir=$${topdir}/libgcc-math"; \
+       libsrcdir="$$s/libgcc-math"; \
+       rm -f no-such-file || : ; \
+       CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+         $(TARGET_CONFIGARGS) $${srcdiroption}  \
+         || exit 1
+@endif target-libgcc-math
+
+
+
+
+
+.PHONY: all-target-libgcc-math maybe-all-target-libgcc-math
+maybe-all-target-libgcc-math:
+@if target-libgcc-math
+TARGET-target-libgcc-math=all
+maybe-all-target-libgcc-math: all-target-libgcc-math
+all-target-libgcc-math: configure-target-libgcc-math
+       @: $(MAKE); $(unstage)
+       @r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(TARGET_FLAGS_TO_PASS)  $(TARGET-target-libgcc-math))
+@endif target-libgcc-math
+
+
+
+
+
+.PHONY: check-target-libgcc-math maybe-check-target-libgcc-math
+maybe-check-target-libgcc-math:
+@if target-libgcc-math
+maybe-check-target-libgcc-math: check-target-libgcc-math
+
+check-target-libgcc-math:
+       @: $(MAKE); $(unstage)
+       @r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(TARGET_FLAGS_TO_PASS)   check)
+
+@endif target-libgcc-math
+
+.PHONY: install-target-libgcc-math maybe-install-target-libgcc-math
+maybe-install-target-libgcc-math:
+@if target-libgcc-math
+maybe-install-target-libgcc-math: install-target-libgcc-math
+
+install-target-libgcc-math: installdirs
+       @: $(MAKE); $(unstage)
+       @r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(TARGET_FLAGS_TO_PASS)  install)
+
+@endif target-libgcc-math
+
+# Other targets (info, dvi, etc.)
+
+.PHONY: maybe-info-target-libgcc-math info-target-libgcc-math
+maybe-info-target-libgcc-math:
+@if target-libgcc-math
+maybe-info-target-libgcc-math: info-target-libgcc-math
+
+info-target-libgcc-math: \
+    configure-target-libgcc-math 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgcc-math/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing info in $(TARGET_SUBDIR)/libgcc-math" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  info) \
+         || exit 1
+
+@endif target-libgcc-math
+
+.PHONY: maybe-dvi-target-libgcc-math dvi-target-libgcc-math
+maybe-dvi-target-libgcc-math:
+@if target-libgcc-math
+maybe-dvi-target-libgcc-math: dvi-target-libgcc-math
+
+dvi-target-libgcc-math: \
+    configure-target-libgcc-math 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgcc-math/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing dvi in $(TARGET_SUBDIR)/libgcc-math" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  dvi) \
+         || exit 1
+
+@endif target-libgcc-math
+
+.PHONY: maybe-html-target-libgcc-math html-target-libgcc-math
+maybe-html-target-libgcc-math:
+@if target-libgcc-math
+maybe-html-target-libgcc-math: html-target-libgcc-math
+
+html-target-libgcc-math: \
+    configure-target-libgcc-math 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgcc-math/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing html in $(TARGET_SUBDIR)/libgcc-math" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  html) \
+         || exit 1
+
+@endif target-libgcc-math
+
+.PHONY: maybe-TAGS-target-libgcc-math TAGS-target-libgcc-math
+maybe-TAGS-target-libgcc-math:
+@if target-libgcc-math
+maybe-TAGS-target-libgcc-math: TAGS-target-libgcc-math
+
+TAGS-target-libgcc-math: \
+    configure-target-libgcc-math 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgcc-math/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing TAGS in $(TARGET_SUBDIR)/libgcc-math" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  TAGS) \
+         || exit 1
+
+@endif target-libgcc-math
+
+.PHONY: maybe-install-info-target-libgcc-math install-info-target-libgcc-math
+maybe-install-info-target-libgcc-math:
+@if target-libgcc-math
+maybe-install-info-target-libgcc-math: install-info-target-libgcc-math
+
+install-info-target-libgcc-math: \
+    configure-target-libgcc-math \
+    info-target-libgcc-math 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgcc-math/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-info in $(TARGET_SUBDIR)/libgcc-math" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-info) \
+         || exit 1
+
+@endif target-libgcc-math
+
+.PHONY: maybe-install-html-target-libgcc-math install-html-target-libgcc-math
+maybe-install-html-target-libgcc-math:
+@if target-libgcc-math
+maybe-install-html-target-libgcc-math: install-html-target-libgcc-math
+
+install-html-target-libgcc-math: \
+    configure-target-libgcc-math \
+    html-target-libgcc-math 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgcc-math/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/libgcc-math" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-libgcc-math
+
+.PHONY: maybe-installcheck-target-libgcc-math installcheck-target-libgcc-math
+maybe-installcheck-target-libgcc-math:
+@if target-libgcc-math
+maybe-installcheck-target-libgcc-math: installcheck-target-libgcc-math
+
+installcheck-target-libgcc-math: \
+    configure-target-libgcc-math 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgcc-math/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing installcheck in $(TARGET_SUBDIR)/libgcc-math" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  installcheck) \
+         || exit 1
+
+@endif target-libgcc-math
+
+.PHONY: maybe-mostlyclean-target-libgcc-math mostlyclean-target-libgcc-math
+maybe-mostlyclean-target-libgcc-math:
+@if target-libgcc-math
+maybe-mostlyclean-target-libgcc-math: mostlyclean-target-libgcc-math
+
+mostlyclean-target-libgcc-math: 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgcc-math/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing mostlyclean in $(TARGET_SUBDIR)/libgcc-math" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  mostlyclean) \
+         || exit 1
+
+@endif target-libgcc-math
+
+.PHONY: maybe-clean-target-libgcc-math clean-target-libgcc-math
+maybe-clean-target-libgcc-math:
+@if target-libgcc-math
+maybe-clean-target-libgcc-math: clean-target-libgcc-math
+
+clean-target-libgcc-math: 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgcc-math/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing clean in $(TARGET_SUBDIR)/libgcc-math" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  clean) \
+         || exit 1
+
+@endif target-libgcc-math
+
+.PHONY: maybe-distclean-target-libgcc-math distclean-target-libgcc-math
+maybe-distclean-target-libgcc-math:
+@if target-libgcc-math
+maybe-distclean-target-libgcc-math: distclean-target-libgcc-math
+
+distclean-target-libgcc-math: 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgcc-math/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing distclean in $(TARGET_SUBDIR)/libgcc-math" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  distclean) \
+         || exit 1
+
+@endif target-libgcc-math
+
+.PHONY: maybe-maintainer-clean-target-libgcc-math maintainer-clean-target-libgcc-math
+maybe-maintainer-clean-target-libgcc-math:
+@if target-libgcc-math
+maybe-maintainer-clean-target-libgcc-math: maintainer-clean-target-libgcc-math
+
+maintainer-clean-target-libgcc-math: 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgcc-math/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libgcc-math" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgcc-math && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  maintainer-clean) \
+         || exit 1
+
+@endif target-libgcc-math
+
+
+
+
+
+=======
+>>>>>>> .r114023
 .PHONY: configure-target-newlib maybe-configure-target-newlib
 maybe-configure-target-newlib:
 @if target-newlib
@@ -30405,6 +32807,33 @@ install-info-target-newlib: \
 
 @endif target-newlib
 
+.PHONY: maybe-install-html-target-newlib install-html-target-newlib
+maybe-install-html-target-newlib:
+@if target-newlib
+maybe-install-html-target-newlib: install-html-target-newlib
+
+install-html-target-newlib: \
+    configure-target-newlib \
+    html-target-newlib 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/newlib" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/newlib && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-newlib
+
 .PHONY: maybe-installcheck-target-newlib installcheck-target-newlib
 maybe-installcheck-target-newlib:
 @if target-newlib
@@ -30759,6 +33188,33 @@ install-info-target-libgfortran: \
 
 @endif target-libgfortran
 
+.PHONY: maybe-install-html-target-libgfortran install-html-target-libgfortran
+maybe-install-html-target-libgfortran:
+@if target-libgfortran
+maybe-install-html-target-libgfortran: install-html-target-libgfortran
+
+install-html-target-libgfortran: \
+    configure-target-libgfortran \
+    html-target-libgfortran 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgfortran/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/libgfortran" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgfortran && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-libgfortran
+
 .PHONY: maybe-installcheck-target-libgfortran installcheck-target-libgfortran
 maybe-installcheck-target-libgfortran:
 @if target-libgfortran
@@ -31113,6 +33569,33 @@ install-info-target-libobjc: \
 
 @endif target-libobjc
 
+.PHONY: maybe-install-html-target-libobjc install-html-target-libobjc
+maybe-install-html-target-libobjc:
+@if target-libobjc
+maybe-install-html-target-libobjc: install-html-target-libobjc
+
+install-html-target-libobjc: \
+    configure-target-libobjc \
+    html-target-libobjc 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/libobjc" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libobjc && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-libobjc
+
 .PHONY: maybe-installcheck-target-libobjc installcheck-target-libobjc
 maybe-installcheck-target-libobjc:
 @if target-libobjc
@@ -31462,6 +33945,33 @@ install-info-target-libtermcap: \
 
 @endif target-libtermcap
 
+.PHONY: maybe-install-html-target-libtermcap install-html-target-libtermcap
+maybe-install-html-target-libtermcap:
+@if target-libtermcap
+maybe-install-html-target-libtermcap: install-html-target-libtermcap
+
+install-html-target-libtermcap: \
+    configure-target-libtermcap \
+    html-target-libtermcap 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/libtermcap" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libtermcap && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-libtermcap
+
 .PHONY: maybe-installcheck-target-libtermcap installcheck-target-libtermcap
 maybe-installcheck-target-libtermcap:
 @if target-libtermcap
@@ -31756,6 +34266,33 @@ install-info-target-winsup: \
 
 @endif target-winsup
 
+.PHONY: maybe-install-html-target-winsup install-html-target-winsup
+maybe-install-html-target-winsup:
+@if target-winsup
+maybe-install-html-target-winsup: install-html-target-winsup
+
+install-html-target-winsup: \
+    configure-target-winsup \
+    html-target-winsup 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/winsup" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/winsup && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-winsup
+
 .PHONY: maybe-installcheck-target-winsup installcheck-target-winsup
 maybe-installcheck-target-winsup:
 @if target-winsup
@@ -32105,6 +34642,33 @@ install-info-target-libgloss: \
 
 @endif target-libgloss
 
+.PHONY: maybe-install-html-target-libgloss install-html-target-libgloss
+maybe-install-html-target-libgloss:
+@if target-libgloss
+maybe-install-html-target-libgloss: install-html-target-libgloss
+
+install-html-target-libgloss: \
+    configure-target-libgloss \
+    html-target-libgloss 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/libgloss" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgloss && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-libgloss
+
 .PHONY: maybe-installcheck-target-libgloss installcheck-target-libgloss
 maybe-installcheck-target-libgloss:
 @if target-libgloss
@@ -32459,6 +35023,33 @@ install-info-target-libiberty: \
 
 @endif target-libiberty
 
+.PHONY: maybe-install-html-target-libiberty install-html-target-libiberty
+maybe-install-html-target-libiberty:
+@if target-libiberty
+maybe-install-html-target-libiberty: install-html-target-libiberty
+
+install-html-target-libiberty: \
+    configure-target-libiberty \
+    html-target-libiberty 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/libiberty" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libiberty && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-libiberty
+
 .PHONY: maybe-installcheck-target-libiberty installcheck-target-libiberty
 maybe-installcheck-target-libiberty:
 @if target-libiberty
@@ -32813,6 +35404,33 @@ install-info-target-gperf: \
 
 @endif target-gperf
 
+.PHONY: maybe-install-html-target-gperf install-html-target-gperf
+maybe-install-html-target-gperf:
+@if target-gperf
+maybe-install-html-target-gperf: install-html-target-gperf
+
+install-html-target-gperf: \
+    configure-target-gperf \
+    html-target-gperf 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/gperf" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/gperf && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-gperf
+
 .PHONY: maybe-installcheck-target-gperf installcheck-target-gperf
 maybe-installcheck-target-gperf:
 @if target-gperf
@@ -33157,6 +35775,33 @@ install-info-target-examples: \
 
 @endif target-examples
 
+.PHONY: maybe-install-html-target-examples install-html-target-examples
+maybe-install-html-target-examples:
+@if target-examples
+maybe-install-html-target-examples: install-html-target-examples
+
+install-html-target-examples: \
+    configure-target-examples \
+    html-target-examples 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/examples" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/examples && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-examples
+
 .PHONY: maybe-installcheck-target-examples installcheck-target-examples
 maybe-installcheck-target-examples:
 @if target-examples
@@ -33511,6 +36156,33 @@ install-info-target-libffi: \
 
 @endif target-libffi
 
+.PHONY: maybe-install-html-target-libffi install-html-target-libffi
+maybe-install-html-target-libffi:
+@if target-libffi
+maybe-install-html-target-libffi: install-html-target-libffi
+
+install-html-target-libffi: \
+    configure-target-libffi \
+    html-target-libffi 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/libffi" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libffi && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-libffi
+
 .PHONY: maybe-installcheck-target-libffi installcheck-target-libffi
 maybe-installcheck-target-libffi:
 @if target-libffi
@@ -33865,6 +36537,33 @@ install-info-target-libjava: \
 
 @endif target-libjava
 
+.PHONY: maybe-install-html-target-libjava install-html-target-libjava
+maybe-install-html-target-libjava:
+@if target-libjava
+maybe-install-html-target-libjava: install-html-target-libjava
+
+install-html-target-libjava: \
+    configure-target-libjava \
+    html-target-libjava 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(RAW_CXX_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/libjava" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libjava && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-libjava
+
 .PHONY: maybe-installcheck-target-libjava installcheck-target-libjava
 maybe-installcheck-target-libjava:
 @if target-libjava
@@ -34219,6 +36918,33 @@ install-info-target-zlib: \
 
 @endif target-zlib
 
+.PHONY: maybe-install-html-target-zlib install-html-target-zlib
+maybe-install-html-target-zlib:
+@if target-zlib
+maybe-install-html-target-zlib: install-html-target-zlib
+
+install-html-target-zlib: \
+    configure-target-zlib \
+    html-target-zlib 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/zlib" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/zlib && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-zlib
+
 .PHONY: maybe-installcheck-target-zlib installcheck-target-zlib
 maybe-installcheck-target-zlib:
 @if target-zlib
@@ -34573,6 +37299,33 @@ install-info-target-boehm-gc: \
 
 @endif target-boehm-gc
 
+.PHONY: maybe-install-html-target-boehm-gc install-html-target-boehm-gc
+maybe-install-html-target-boehm-gc:
+@if target-boehm-gc
+maybe-install-html-target-boehm-gc: install-html-target-boehm-gc
+
+install-html-target-boehm-gc: \
+    configure-target-boehm-gc \
+    html-target-boehm-gc 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/boehm-gc" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/boehm-gc && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-boehm-gc
+
 .PHONY: maybe-installcheck-target-boehm-gc installcheck-target-boehm-gc
 maybe-installcheck-target-boehm-gc:
 @if target-boehm-gc
@@ -34927,6 +37680,33 @@ install-info-target-qthreads: \
 
 @endif target-qthreads
 
+.PHONY: maybe-install-html-target-qthreads install-html-target-qthreads
+maybe-install-html-target-qthreads:
+@if target-qthreads
+maybe-install-html-target-qthreads: install-html-target-qthreads
+
+install-html-target-qthreads: \
+    configure-target-qthreads \
+    html-target-qthreads 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/qthreads" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/qthreads && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-qthreads
+
 .PHONY: maybe-installcheck-target-qthreads installcheck-target-qthreads
 maybe-installcheck-target-qthreads:
 @if target-qthreads
@@ -35281,6 +38061,33 @@ install-info-target-rda: \
 
 @endif target-rda
 
+.PHONY: maybe-install-html-target-rda install-html-target-rda
+maybe-install-html-target-rda:
+@if target-rda
+maybe-install-html-target-rda: install-html-target-rda
+
+install-html-target-rda: \
+    configure-target-rda \
+    html-target-rda 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/rda" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/rda && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-rda
+
 .PHONY: maybe-installcheck-target-rda installcheck-target-rda
 maybe-installcheck-target-rda:
 @if target-rda
@@ -35635,6 +38442,33 @@ install-info-target-libada: \
 
 @endif target-libada
 
+.PHONY: maybe-install-html-target-libada install-html-target-libada
+maybe-install-html-target-libada:
+@if target-libada
+maybe-install-html-target-libada: install-html-target-libada
+
+install-html-target-libada: \
+    configure-target-libada \
+    html-target-libada 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/libada" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libada && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-libada
+
 .PHONY: maybe-installcheck-target-libada installcheck-target-libada
 maybe-installcheck-target-libada:
 @if target-libada
@@ -35989,6 +38823,33 @@ install-info-target-libgomp: \
 
 @endif target-libgomp
 
+.PHONY: maybe-install-html-target-libgomp install-html-target-libgomp
+maybe-install-html-target-libgomp:
+@if target-libgomp
+maybe-install-html-target-libgomp: install-html-target-libgomp
+
+install-html-target-libgomp: \
+    configure-target-libgomp \
+    html-target-libgomp 
+       @: $(MAKE); $(unstage)
+       @[ -f $(TARGET_SUBDIR)/libgomp/Makefile ] || exit 0 ; \
+       r=`${PWD_COMMAND}`; export r; \
+       s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+       $(NORMAL_TARGET_EXPORTS) \
+       echo "Doing install-html in $(TARGET_SUBDIR)/libgomp" ; \
+       for flag in $(EXTRA_TARGET_FLAGS); do \
+         eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+       done; \
+       (cd $(TARGET_SUBDIR)/libgomp && \
+         $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+                 "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+                 "RANLIB=$${RANLIB}" \
+                 "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+                  install-html) \
+         || exit 1
+
+@endif target-libgomp
+
 .PHONY: maybe-installcheck-target-libgomp installcheck-target-libgomp
 maybe-installcheck-target-libgomp:
 @if target-libgomp
@@ -36245,7 +39106,7 @@ stage = :
 current_stage = ""
 
 @if gcc-bootstrap
-unstage = [ -f stage_current ] || $(MAKE) `cat stage_last`-start
+unstage = if [ -f stage_current ]; then :; elif [ -f stage_last ]; then $(MAKE) `cat stage_last`-start; fi
 stage = if [ -f stage_current ]; then $(MAKE) `cat stage_current`-end || exit 1; else :; fi
 current_stage = "`cat stage_current 2> /dev/null`"
 @endif gcc-bootstrap
index 274474a..b83d8d5 100644 (file)
@@ -53,6 +53,9 @@ libdir = @libdir@
 includedir = @includedir@
 oldincludedir = @oldincludedir@
 infodir = @infodir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+htmldir = @htmldir@
 mandir = @mandir@
 man1dir = $(mandir)/man1
 man2dir = $(mandir)/man2
@@ -532,7 +535,7 @@ do-[+make_target+]:
 
 # Here are the targets which correspond to the do-X targets.
 
-.PHONY: info installcheck dvi html install-info
+.PHONY: info installcheck dvi html install-info install-html
 .PHONY: clean distclean mostlyclean maintainer-clean realclean
 .PHONY: local-clean local-distclean local-maintainer-clean
 info: do-info
@@ -550,6 +553,8 @@ install-info: do-install-info dir.info
          $(INSTALL_DATA) dir.info $(DESTDIR)$(infodir)/dir.info ; \
        else true ; fi
 
+install-html: do-install-html
+
 local-clean:
        -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log
 
index efc23b6..b751d26 100755 (executable)
--- a/configure
+++ b/configure
@@ -16,6 +16,12 @@ ac_help="$ac_help
 ac_help="$ac_help
   --enable-libssp        Builds libssp directory"
 ac_help="$ac_help
+  --with-datarootdir   Use datarootdir as the data root directory."
+ac_help="$ac_help
+  --with-docdir        Install documentation in this directory."
+ac_help="$ac_help
+  --with-htmldir       Install html in this directory."
+ac_help="$ac_help
   --with-mpfr-dir=PATH    Specify source directory for MPFR library"
 ac_help="$ac_help
   --with-mpfr=PATH        Specify directory for installed MPFR library"
@@ -599,7 +605,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:603: checking host system type" >&5
+echo "configure:609: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -620,7 +626,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:624: checking target system type" >&5
+echo "configure:630: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -638,7 +644,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:642: checking build system type" >&5
+echo "configure:648: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -693,7 +699,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:697: checking for a BSD compatible install" >&5
+echo "configure:703: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -746,7 +752,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:750: checking whether ln works" >&5
+echo "configure:756: checking whether ln works" >&5
 if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -770,7 +776,7 @@ else
 fi
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:774: checking whether ln -s works" >&5
+echo "configure:780: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1837,7 +1843,7 @@ else
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1841: checking for $ac_word" >&5
+echo "configure:1847: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1867,7 +1873,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1871: checking for $ac_word" >&5
+echo "configure:1877: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1918,7 +1924,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1922: checking for $ac_word" >&5
+echo "configure:1928: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1950,7 +1956,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1954: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1960: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1961,12 +1967,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1965 "configure"
+#line 1971 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1970: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1976: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1992,12 +1998,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1996: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2002: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2001: checking whether we are using GNU C" >&5
+echo "configure:2007: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2006,7 +2012,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2010: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2016: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2025,7 +2031,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2029: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2035: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2092,7 +2098,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2096: checking for $ac_word" >&5
+echo "configure:2102: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2124,7 +2130,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "gnatbind", so it can be a program name with args.
 set dummy gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2128: checking for $ac_word" >&5
+echo "configure:2134: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2157,7 +2163,7 @@ fi
 fi
 
 echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2161: checking whether compiler driver understands Ada" >&5
+echo "configure:2167: checking whether compiler driver understands Ada" >&5
 if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2189,7 +2195,7 @@ else
 fi
 
 echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2193: checking how to compare bootstrapped objects" >&5
+echo "configure:2199: checking how to compare bootstrapped objects" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2219,6 +2225,38 @@ do_compare="$gcc_cv_prog_cmp_skip"
 
 
 
+# Check for html and install-html
+# Check whether --with-datarootdir or --without-datarootdir was given.
+if test "${with_datarootdir+set}" = set; then
+  withval="$with_datarootdir"
+  datarootdir="\${prefix}/${withval}"
+else
+  datarootdir="\${prefix}/share"
+fi
+
+
+# Check whether --with-docdir or --without-docdir was given.
+if test "${with_docdir+set}" = set; then
+  withval="$with_docdir"
+  docdir="\${prefix}/${withval}"
+else
+  docdir="\${datarootdir}/doc"
+fi
+
+
+# Check whether --with-htmldir or --without-htmldir was given.
+if test "${with_htmldir+set}" = set; then
+  withval="$with_htmldir"
+  htmldir="\${prefix}/${withval}"
+else
+  htmldir="\${docdir}"
+fi
+
+
+
+
+
+
 # Check for GMP and MPFR
 gmplibs=
 gmpinc=
@@ -2287,9 +2325,9 @@ saved_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS $gmpinc"
 # Check GMP actually works
 echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2291: checking for correct version of gmp.h" >&5
+echo "configure:2329: checking for correct version of gmp.h" >&5
 cat > conftest.$ac_ext <<EOF
-#line 2293 "configure"
+#line 2331 "configure"
 #include "confdefs.h"
 #include "gmp.h"
 int main() {
@@ -2300,7 +2338,7 @@ choke me
 
 ; return 0; }
 EOF
-if { (eval echo configure:2304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2342: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -2313,12 +2351,12 @@ rm -f conftest*
 
 if test x"$have_gmp" = xyes; then
   echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2317: checking for MPFR" >&5
+echo "configure:2355: checking for MPFR" >&5
 
   saved_LIBS="$LIBS"
   LIBS="$LIBS $gmplibs"
   cat > conftest.$ac_ext <<EOF
-#line 2322 "configure"
+#line 2360 "configure"
 #include "confdefs.h"
 #include <gmp.h>
 #include <mpfr.h>
@@ -2326,7 +2364,7 @@ int main() {
 mpfr_t n; mpfr_init(n);
 ; return 0; }
 EOF
-if { (eval echo configure:2330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2368: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -3391,7 +3429,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3395: checking for $ac_word" >&5
+echo "configure:3433: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3431,7 +3469,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3435: checking for $ac_word" >&5
+echo "configure:3473: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3470,7 +3508,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3474: checking for $ac_word" >&5
+echo "configure:3512: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3509,7 +3547,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3513: checking for $ac_word" >&5
+echo "configure:3551: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3549,7 +3587,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3553: checking for $ac_word" >&5
+echo "configure:3591: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3588,7 +3626,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3592: checking for $ac_word" >&5
+echo "configure:3630: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3641,7 +3679,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3645: checking for $ac_word" >&5
+echo "configure:3683: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3682,7 +3720,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3686: checking for $ac_word" >&5
+echo "configure:3724: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3730,7 +3768,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3734: checking for $ac_word" >&5
+echo "configure:3772: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3761,7 +3799,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3765: checking for $ac_word" >&5
+echo "configure:3803: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3805,7 +3843,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3809: checking for $ac_word" >&5
+echo "configure:3847: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3836,7 +3874,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3840: checking for $ac_word" >&5
+echo "configure:3878: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3880,7 +3918,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3884: checking for $ac_word" >&5
+echo "configure:3922: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3911,7 +3949,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3915: checking for $ac_word" >&5
+echo "configure:3953: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3955,7 +3993,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3959: checking for $ac_word" >&5
+echo "configure:3997: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3986,7 +4024,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3990: checking for $ac_word" >&5
+echo "configure:4028: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4030,7 +4068,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4034: checking for $ac_word" >&5
+echo "configure:4072: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4061,7 +4099,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4065: checking for $ac_word" >&5
+echo "configure:4103: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4105,7 +4143,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4109: checking for $ac_word" >&5
+echo "configure:4147: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4136,7 +4174,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4140: checking for $ac_word" >&5
+echo "configure:4178: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4180,7 +4218,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4184: checking for $ac_word" >&5
+echo "configure:4222: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4211,7 +4249,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4215: checking for $ac_word" >&5
+echo "configure:4253: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4250,7 +4288,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4254: checking for $ac_word" >&5
+echo "configure:4292: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4281,7 +4319,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4285: checking for $ac_word" >&5
+echo "configure:4323: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4320,7 +4358,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4324: checking for $ac_word" >&5
+echo "configure:4362: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4351,7 +4389,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4355: checking for $ac_word" >&5
+echo "configure:4393: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4395,7 +4433,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4399: checking for $ac_word" >&5
+echo "configure:4437: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4426,7 +4464,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4430: checking for $ac_word" >&5
+echo "configure:4468: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4470,7 +4508,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4474: checking for $ac_word" >&5
+echo "configure:4512: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4501,7 +4539,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4505: checking for $ac_word" >&5
+echo "configure:4543: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4565,7 +4603,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in cc gcc; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4569: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4607: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4582,7 +4620,7 @@ if test -z "$ac_cv_prog_CC_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4586: checking for $ac_word" >&5
+echo "configure:4624: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4613,7 +4651,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4617: checking for $ac_word" >&5
+echo "configure:4655: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4656,7 +4694,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in c++ g++ cxx gxx; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4660: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4698: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4673,7 +4711,7 @@ if test -z "$ac_cv_prog_CXX_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4677: checking for $ac_word" >&5
+echo "configure:4715: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4704,7 +4742,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4708: checking for $ac_word" >&5
+echo "configure:4746: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4747,7 +4785,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in gcc; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4751: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4789: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4764,7 +4802,7 @@ if test -z "$ac_cv_prog_GCC_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4768: checking for $ac_word" >&5
+echo "configure:4806: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4795,7 +4833,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4799: checking for $ac_word" >&5
+echo "configure:4837: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4833,7 +4871,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in gcj; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4837: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4875: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4850,7 +4888,7 @@ if test -z "$ac_cv_prog_GCJ_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4854: checking for $ac_word" >&5
+echo "configure:4892: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4881,7 +4919,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4885: checking for $ac_word" >&5
+echo "configure:4923: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4924,7 +4962,7 @@ fi
  if test -n "$with_build_time_tools"; then
   for ncn_progname in gfortran; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4928: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4966: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -4941,7 +4979,7 @@ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4945: checking for $ac_word" >&5
+echo "configure:4983: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4972,7 +5010,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4976: checking for $ac_word" >&5
+echo "configure:5014: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5079,7 +5117,7 @@ rm conftest.c
 if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for ar in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5083: checking for ar in $with_build_time_tools" >&5
+echo "configure:5121: checking for ar in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/ar; then
       AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/ar
       ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
@@ -5097,7 +5135,7 @@ if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
   # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5101: checking for $ac_word" >&5
+echo "configure:5139: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5134,7 +5172,7 @@ if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in ar; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5138: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5176: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5151,7 +5189,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5155: checking for $ac_word" >&5
+echo "configure:5193: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5182,7 +5220,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5186: checking for $ac_word" >&5
+echo "configure:5224: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5232,7 +5270,7 @@ fi
 if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for as in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5236: checking for as in $with_build_time_tools" >&5
+echo "configure:5274: checking for as in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/as; then
       AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/as
       ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
@@ -5250,7 +5288,7 @@ if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
   # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5254: checking for $ac_word" >&5
+echo "configure:5292: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5287,7 +5325,7 @@ if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in as; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5291: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5329: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5304,7 +5342,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5308: checking for $ac_word" >&5
+echo "configure:5346: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5335,7 +5373,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5339: checking for $ac_word" >&5
+echo "configure:5377: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5385,7 +5423,7 @@ fi
 if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for dlltool in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5389: checking for dlltool in $with_build_time_tools" >&5
+echo "configure:5427: checking for dlltool in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/dlltool; then
       DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/dlltool
       ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
@@ -5403,7 +5441,7 @@ if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
   # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5407: checking for $ac_word" >&5
+echo "configure:5445: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5440,7 +5478,7 @@ if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in dlltool; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5444: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5482: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5457,7 +5495,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5461: checking for $ac_word" >&5
+echo "configure:5499: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5488,7 +5526,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5492: checking for $ac_word" >&5
+echo "configure:5530: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5538,7 +5576,7 @@ fi
 if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for ld in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5542: checking for ld in $with_build_time_tools" >&5
+echo "configure:5580: checking for ld in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/ld; then
       LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/ld
       ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
@@ -5556,7 +5594,7 @@ if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
   # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5560: checking for $ac_word" >&5
+echo "configure:5598: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5593,7 +5631,7 @@ if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in ld; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5597: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5635: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5610,7 +5648,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5614: checking for $ac_word" >&5
+echo "configure:5652: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5641,7 +5679,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5645: checking for $ac_word" >&5
+echo "configure:5683: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5691,7 +5729,7 @@ fi
 if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for lipo in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5695: checking for lipo in $with_build_time_tools" >&5
+echo "configure:5733: checking for lipo in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/lipo; then
       LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/lipo
       ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
@@ -5709,7 +5747,7 @@ if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
   # Extract the first word of "lipo", so it can be a program name with args.
 set dummy lipo; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5713: checking for $ac_word" >&5
+echo "configure:5751: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5746,7 +5784,7 @@ if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in lipo; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5750: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5788: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5763,7 +5801,7 @@ if test -z "$ac_cv_prog_LIPO_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5767: checking for $ac_word" >&5
+echo "configure:5805: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5794,7 +5832,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5798: checking for $ac_word" >&5
+echo "configure:5836: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5844,7 +5882,7 @@ fi
 if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for nm in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5848: checking for nm in $with_build_time_tools" >&5
+echo "configure:5886: checking for nm in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/nm; then
       NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/nm
       ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
@@ -5862,7 +5900,7 @@ if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
   # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5866: checking for $ac_word" >&5
+echo "configure:5904: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5899,7 +5937,7 @@ if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in nm; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5903: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5941: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -5916,7 +5954,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5920: checking for $ac_word" >&5
+echo "configure:5958: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5947,7 +5985,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5951: checking for $ac_word" >&5
+echo "configure:5989: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5997,7 +6035,7 @@ fi
 if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for objdump in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6001: checking for objdump in $with_build_time_tools" >&5
+echo "configure:6039: checking for objdump in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/objdump; then
       OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/objdump
       ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
@@ -6015,7 +6053,7 @@ if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
   # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6019: checking for $ac_word" >&5
+echo "configure:6057: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6052,7 +6090,7 @@ if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in objdump; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6056: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6094: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -6069,7 +6107,7 @@ if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6073: checking for $ac_word" >&5
+echo "configure:6111: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6100,7 +6138,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6104: checking for $ac_word" >&5
+echo "configure:6142: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6150,7 +6188,7 @@ fi
 if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for ranlib in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6154: checking for ranlib in $with_build_time_tools" >&5
+echo "configure:6192: checking for ranlib in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/ranlib; then
       RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/ranlib
       ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
@@ -6168,7 +6206,7 @@ if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6172: checking for $ac_word" >&5
+echo "configure:6210: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6205,7 +6243,7 @@ if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in ranlib; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6209: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6247: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -6222,7 +6260,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6226: checking for $ac_word" >&5
+echo "configure:6264: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6253,7 +6291,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6257: checking for $ac_word" >&5
+echo "configure:6295: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6303,7 +6341,7 @@ fi
 if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for strip in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6307: checking for strip in $with_build_time_tools" >&5
+echo "configure:6345: checking for strip in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/strip; then
       STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/strip
       ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
@@ -6321,7 +6359,7 @@ if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6325: checking for $ac_word" >&5
+echo "configure:6363: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6358,7 +6396,7 @@ if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in strip; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6362: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6400: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -6375,7 +6413,7 @@ if test -z "$ac_cv_prog_STRIP_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6379: checking for $ac_word" >&5
+echo "configure:6417: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6406,7 +6444,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6410: checking for $ac_word" >&5
+echo "configure:6448: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6456,7 +6494,7 @@ fi
 if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
   if test -n "$with_build_time_tools"; then
     echo $ac_n "checking for windres in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6460: checking for windres in $with_build_time_tools" >&5
+echo "configure:6498: checking for windres in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/windres; then
       WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/windres
       ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
@@ -6474,7 +6512,7 @@ if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
   # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6478: checking for $ac_word" >&5
+echo "configure:6516: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6511,7 +6549,7 @@ if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
    if test -n "$with_build_time_tools"; then
   for ncn_progname in windres; do
     echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6515: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6553: checking for ${ncn_progname} in $with_build_time_tools" >&5
     if test -x $with_build_time_tools/${ncn_progname}; then
       ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/${ncn_progname}
       echo "$ac_t""yes" 1>&6
@@ -6528,7 +6566,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET"; then
       # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6532: checking for $ac_word" >&5
+echo "configure:6570: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6559,7 +6597,7 @@ fi
       # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6563: checking for $ac_word" >&5
+echo "configure:6601: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6607,7 +6645,7 @@ fi
 RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
 
 echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
-echo "configure:6611: checking where to find the target ar" >&5
+echo "configure:6649: checking where to find the target ar" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6640,7 +6678,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
-echo "configure:6644: checking where to find the target as" >&5
+echo "configure:6682: checking where to find the target as" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6673,7 +6711,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
-echo "configure:6677: checking where to find the target cc" >&5
+echo "configure:6715: checking where to find the target cc" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6706,7 +6744,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
-echo "configure:6710: checking where to find the target c++" >&5
+echo "configure:6748: checking where to find the target c++" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6742,7 +6780,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
-echo "configure:6746: checking where to find the target c++ for libstdc++" >&5
+echo "configure:6784: checking where to find the target c++ for libstdc++" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6778,7 +6816,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
-echo "configure:6782: checking where to find the target dlltool" >&5
+echo "configure:6820: checking where to find the target dlltool" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6811,7 +6849,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
-echo "configure:6815: checking where to find the target gcc" >&5
+echo "configure:6853: checking where to find the target gcc" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6844,7 +6882,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
-echo "configure:6848: checking where to find the target gcj" >&5
+echo "configure:6886: checking where to find the target gcj" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6880,7 +6918,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
-echo "configure:6884: checking where to find the target gfortran" >&5
+echo "configure:6922: checking where to find the target gfortran" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6916,7 +6954,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
-echo "configure:6920: checking where to find the target ld" >&5
+echo "configure:6958: checking where to find the target ld" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6949,7 +6987,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
-echo "configure:6953: checking where to find the target lipo" >&5
+echo "configure:6991: checking where to find the target lipo" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -6972,7 +7010,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
-echo "configure:6976: checking where to find the target nm" >&5
+echo "configure:7014: checking where to find the target nm" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7005,7 +7043,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
-echo "configure:7009: checking where to find the target objdump" >&5
+echo "configure:7047: checking where to find the target objdump" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7038,7 +7076,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
-echo "configure:7042: checking where to find the target ranlib" >&5
+echo "configure:7080: checking where to find the target ranlib" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7071,7 +7109,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
-echo "configure:7075: checking where to find the target strip" >&5
+echo "configure:7113: checking where to find the target strip" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7104,7 +7142,7 @@ else
   fi
 fi
 echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
-echo "configure:7108: checking where to find the target windres" >&5
+echo "configure:7146: checking where to find the target windres" >&5
 if test "x${build}" != "x${host}" ; then
   if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
     # We already found the complete path
@@ -7165,7 +7203,7 @@ fi
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:7169: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7207: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -7290,34 +7328,15 @@ trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 # Transform confdefs.h into DEFS.
 # Protect against shell expansion while executing Makefile rules.
 # Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section.  Otherwise,
-# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
-t clear
-: clear
-s,^[   ]*#[    ]*define[       ][      ]*\([^  (][^    (]*([^)]*)\)[   ]*\(.*\),-D\1=\2,g
-t quote
-s,^[   ]*#[    ]*define[       ][      ]*\([^  ][^     ]*\)[   ]*\(.*\),-D\1=\2,g
-t quote
-d
-: quote
-s,[    `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output.  A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[    `~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
 
 
 # Without the "./", some shells look in PATH for config.status.
@@ -7415,6 +7434,9 @@ s%@target_subdir@%$target_subdir%g
 s%@CC@%$CC%g
 s%@GNATBIND@%$GNATBIND%g
 s%@do_compare@%$do_compare%g
+s%@datarootdir@%$datarootdir%g
+s%@docdir@%$docdir%g
+s%@htmldir@%$htmldir%g
 s%@gmplibs@%$gmplibs%g
 s%@gmpinc@%$gmpinc%g
 s%@stage1_languages@%$stage1_languages%g
index c78cec7..bf37b80 100644 (file)
@@ -1068,6 +1068,26 @@ fi
 ACX_PROG_GNAT
 ACX_PROG_CMP_IGNORE_INITIAL
 
+# Check for html and install-html
+AC_ARG_WITH(datarootdir,
+[  --with-datarootdir   Use datarootdir as the data root directory.],
+[datarootdir="\${prefix}/${withval}"],
+[datarootdir="\${prefix}/share"])
+
+AC_ARG_WITH(docdir,
+[  --with-docdir        Install documentation in this directory.],
+[docdir="\${prefix}/${withval}"],
+[docdir="\${datarootdir}/doc"])
+
+AC_ARG_WITH(htmldir,
+[  --with-htmldir       Install html in this directory.],
+[htmldir="\${prefix}/${withval}"],
+[htmldir="\${docdir}"])
+
+AC_SUBST(datarootdir)
+AC_SUBST(docdir)
+AC_SUBST(htmldir)
+
 # Check for GMP and MPFR
 gmplibs=
 gmpinc=