sub-packages for the host, target or build
machine, or all sub-packages"
ac_help="$ac_help
+ --with-build-time-tools=path
+ use given path to find target tools during the build"
+ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
ac_help="$ac_help
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:600: checking host system type" >&5
+echo "configure:603: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:621: checking target system type" >&5
+echo "configure:624: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:639: checking build system type" >&5
+echo "configure:642: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:694: checking for a BSD compatible install" >&5
+echo "configure:697: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:747: checking whether ln works" >&5
+echo "configure:750: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:771: checking whether ln -s works" >&5
+echo "configure:774: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1856: checking for $ac_word" >&5
+echo "configure:1859: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1886: checking for $ac_word" >&5
+echo "configure:1889: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1937: checking for $ac_word" >&5
+echo "configure:1940: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1969: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1972: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1980 "configure"
+#line 1983 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1988: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2011: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2014: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2016: checking whether we are using GNU C" >&5
+echo "configure:2019: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2025: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2028: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2044: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2047: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2111: checking for $ac_word" >&5
+echo "configure:2114: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2143: checking for $ac_word" >&5
+echo "configure:2146: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2176: checking whether compiler driver understands Ada" >&5
+echo "configure:2179: checking whether compiler driver understands Ada" >&5
if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2208: checking how to compare bootstrapped objects" >&5
+echo "configure:2211: checking how to compare bootstrapped objects" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2306: checking for correct version of gmp.h" >&5
+echo "configure:2309: checking for correct version of gmp.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 2308 "configure"
+#line 2311 "configure"
#include "confdefs.h"
#include "gmp.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2319: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2322: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
if test x"$have_gmp" = xyes; then
echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2332: checking for MPFR" >&5
+echo "configure:2335: checking for MPFR" >&5
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
cat > conftest.$ac_ext <<EOF
-#line 2337 "configure"
+#line 2340 "configure"
#include "confdefs.h"
#include <gmp.h>
#include <mpfr.h>
mpfr_t n; mpfr_init(n);
; return 0; }
EOF
-if { (eval echo configure:2345: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2348: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
fi
fi
+# Set with_gnu_as and with_gnu_ld as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+#
+# The command line options always override the explicit settings in
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script.
+
+if test x${use_gnu_as} = x &&
+ echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
+ with_gnu_as=yes
+ extra_host_args="$extra_host_args --with-gnu-as"
+fi
+
+if test x${use_gnu_ld} = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
+ with_gnu_ld=yes
+ extra_host_args="$extra_host_args --with-gnu-ld"
+fi
+
+# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
+# can detect this case.
+
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
+ with_newlib=yes
+ extra_host_args="$extra_host_args --with-newlib"
+fi
+
# Handle ${copy_dirs}
set fnord ${copy_dirs}
shift
shift; shift
done
+# Determine a target-dependent exec_prefix that the installed
+# gcc will search in. Keep this list sorted by triplet, with
+# the *-*-osname triplets last.
+md_exec_prefix=
+case "${target}" in
+ alpha*-*-*vms*)
+ md_exec_prefix=/gnu/lib/gcc-lib
+ ;;
+ i3456786-pc-msdosdjgpp*)
+ md_exec_prefix=/dev/env/DJDIR/bin
+ ;;
+ i3456786-*-sco3.2v5*)
+ if test $with_gnu_as = yes; then
+ md_exec_prefix=/usr/gnu/bin
+ else
+ md_exec_prefix=/usr/ccs/bin/elf
+ fi
+ ;;
+
+ mn10300-*-* | \
+ powerpc-*-chorusos* | \
+ powerpc*-*-eabi* | \
+ powerpc*-*-sysv* | \
+ powerpc*-*-kaos* | \
+ s390x-ibm-tpf*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ sparc64-*-elf*)
+ ;;
+ v850*-*-*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ xtensa-*-elf*)
+ ;;
+
+ *-*-beos* | \
+ *-*-elf* | \
+ *-*-hpux* | \
+ *-*-netware* | \
+ *-*-nto-qnx* | \
+ *-*-rtems* | \
+ *-*-solaris2* | \
+ *-*-sysv45* | \
+ *-*-vxworks* | \
+ *-wrs-windiss)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+esac
+
extra_arflags_for_target=
extra_nmflags_for_target=
extra_ranlibflags_for_target=
;;
esac
-# Set with_gnu_as and with_gnu_ld as appropriate.
-#
-# This is done by determining whether or not the appropriate directory
-# is available, and by checking whether or not specific configurations
-# have requested that this magic not happen.
-#
-# The command line options always override the explicit settings in
-# configure.in, and the settings in configure.in override this magic.
-#
-# If the default for a toolchain is to use GNU as and ld, and you don't
-# want to do that, then you should use the --without-gnu-as and
-# --without-gnu-ld options for the configure script.
-
-if test x${use_gnu_as} = x &&
- echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
- with_gnu_as=yes
- extra_host_args="$extra_host_args --with-gnu-as"
-fi
-
-if test x${use_gnu_ld} = x &&
- echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
- with_gnu_ld=yes
- extra_host_args="$extra_host_args --with-gnu-ld"
-fi
-
-# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
-# can detect this case.
-
-if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
- with_newlib=yes
- extra_host_args="$extra_host_args --with-newlib"
-fi
-
# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
case "${target}" in
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3341: checking for $ac_word" >&5
+echo "configure:3393: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3381: checking for $ac_word" >&5
+echo "configure:3433: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3420: checking for $ac_word" >&5
+echo "configure:3472: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3459: checking for $ac_word" >&5
+echo "configure:3511: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3499: checking for $ac_word" >&5
+echo "configure:3551: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3538: checking for $ac_word" >&5
+echo "configure:3590: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3591: checking for $ac_word" >&5
+echo "configure:3643: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3632: checking for $ac_word" >&5
+echo "configure:3684: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3680: checking for $ac_word" >&5
+echo "configure:3732: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3711: checking for $ac_word" >&5
+echo "configure:3763: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3755: checking for $ac_word" >&5
+echo "configure:3807: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3786: checking for $ac_word" >&5
+echo "configure:3838: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3830: checking for $ac_word" >&5
+echo "configure:3882: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3861: checking for $ac_word" >&5
+echo "configure:3913: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3905: checking for $ac_word" >&5
+echo "configure:3957: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3936: checking for $ac_word" >&5
+echo "configure:3988: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3980: checking for $ac_word" >&5
+echo "configure:4032: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4011: checking for $ac_word" >&5
+echo "configure:4063: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4055: checking for $ac_word" >&5
+echo "configure:4107: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4086: checking for $ac_word" >&5
+echo "configure:4138: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4130: checking for $ac_word" >&5
+echo "configure:4182: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4161: checking for $ac_word" >&5
+echo "configure:4213: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4200: checking for $ac_word" >&5
+echo "configure:4252: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4231: checking for $ac_word" >&5
+echo "configure:4283: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4270: checking for $ac_word" >&5
+echo "configure:4322: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4301: checking for $ac_word" >&5
+echo "configure:4353: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4345: checking for $ac_word" >&5
+echo "configure:4397: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4376: checking for $ac_word" >&5
+echo "configure:4428: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4420: checking for $ac_word" >&5
+echo "configure:4472: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4451: checking for $ac_word" >&5
+echo "configure:4503: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Target tools.
- for ncn_progname in ar; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4502: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AR_FOR_TARGET"; then
- ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
-if test -n "$AR_FOR_TARGET"; then
- echo "$ac_t""$AR_FOR_TARGET" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
- fi
- if test -z "$ac_cv_prog_AR_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4533: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AR_FOR_TARGET"; then
- ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AR_FOR_TARGET="${ncn_progname}"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
-if test -n "$AR_FOR_TARGET"; then
- echo "$ac_t""$AR_FOR_TARGET" 1>&6
+# Check whether --with-build-time-tools or --without-build-time-tools was given.
+if test "${with_build_time_tools+set}" = set; then
+ withval="$with_build_time_tools"
+ case x"$withval" in
+ x/*) ;;
+ *)
+ with_build_time_tools=
+ echo "configure: warning: argument to --with-build-time-tools must be an absolute path" 1>&2
+ ;;
+ esac
else
- echo "$ac_t""no" 1>&6
-fi
-
- fi
- test -n "$ac_cv_prog_AR_FOR_TARGET" && break
-done
-
-if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
- set dummy ar
- if test $build = $target ; then
- AR_FOR_TARGET="$2"
- else
- AR_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
+ with_build_time_tools=
fi
- for ncn_progname in as; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4577: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS_FOR_TARGET"; then
- ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
-if test -n "$AS_FOR_TARGET"; then
- echo "$ac_t""$AS_FOR_TARGET" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
- fi
- if test -z "$ac_cv_prog_AS_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4608: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$AS_FOR_TARGET"; then
- ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_AS_FOR_TARGET="${ncn_progname}"
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in cc gcc; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4567: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/CC_FOR_TARGET; then
+ ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/CC_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
break
+ else
+ echo "$ac_t""no" 1>&6
fi
done
- IFS="$ac_save_ifs"
-fi
-fi
-AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
-if test -n "$AS_FOR_TARGET"; then
- echo "$ac_t""$AS_FOR_TARGET" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
- fi
- test -n "$ac_cv_prog_AS_FOR_TARGET" && break
-done
-
-if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
- set dummy as
- if test $build = $target ; then
- AS_FOR_TARGET="$2"
- else
- AS_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
fi
- for ncn_progname in cc gcc; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+if test -z "$ac_cv_prog_CC_FOR_TARGET"; then
+ for ncn_progname in cc gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4652: checking for $ac_word" >&5
+echo "configure:4584: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_CC_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_CC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4683: checking for $ac_word" >&5
+echo "configure:4615: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_CC_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_CC_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_CC_FOR_TARGET" ; then
set dummy cc gcc
if test $build = $target ; then
fi
fi
- for ncn_progname in c++ g++ cxx gxx; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in c++ g++ cxx gxx; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4658: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/CXX_FOR_TARGET; then
+ ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/CXX_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_CXX_FOR_TARGET"; then
+ for ncn_progname in c++ g++ cxx gxx; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4727: checking for $ac_word" >&5
+echo "configure:4675: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_CXX_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_CXX_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4758: checking for $ac_word" >&5
+echo "configure:4706: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_CXX_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_CXX_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_CXX_FOR_TARGET" ; then
set dummy c++ g++ cxx gxx
if test $build = $target ; then
fi
fi
- for ncn_progname in dlltool; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in gcc; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4749: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/GCC_FOR_TARGET; then
+ ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/GCC_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_GCC_FOR_TARGET"; then
+ for ncn_progname in gcc; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4802: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4766: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
-if test -n "$DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
+GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$ac_t""$GCC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_GCC_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4833: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:4797: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$DLLTOOL_FOR_TARGET"; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
+ if test -n "$GCC_FOR_TARGET"; then
+ ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_GCC_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
-if test -n "$DLLTOOL_FOR_TARGET"; then
- echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
+GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
+if test -n "$GCC_FOR_TARGET"; then
+ echo "$ac_t""$GCC_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ fi
+ test -n "$ac_cv_prog_GCC_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
+ GCC_FOR_TARGET="${CC_FOR_TARGET}"
+fi
+
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in gcj; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4835: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/GCJ_FOR_TARGET; then
+ ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/GCJ_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_GCJ_FOR_TARGET"; then
+ for ncn_progname in gcj; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4852: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4883: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GCJ_FOR_TARGET"; then
+ ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
+if test -n "$GCJ_FOR_TARGET"; then
+ echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
+ set dummy gcj
+ if test $build = $target ; then
+ GCJ_FOR_TARGET="$2"
+ else
+ GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
- test -n "$ac_cv_prog_DLLTOOL_FOR_TARGET" && break
-done
+fi
-if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
- set dummy dlltool
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in gfortran; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:4926: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/GFORTRAN_FOR_TARGET; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/GFORTRAN_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET"; then
+ for ncn_progname in gfortran; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4943: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4974: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GFORTRAN_FOR_TARGET"; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
+if test -n "$GFORTRAN_FOR_TARGET"; then
+ echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" ; then
+ set dummy gfortran
if test $build = $target ; then
- DLLTOOL_FOR_TARGET="$2"
+ GFORTRAN_FOR_TARGET="$2"
else
- DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
fi
+ rm -f conf$$.sh
+fi
+
+
+
+if test "x$exec_prefix" = xNONE; then
+ if test "x$prefix" = xNONE; then
+ gcc_cv_tool_prefix=$ac_default_prefix
+ else
+ gcc_cv_tool_prefix=$prefix
+ fi
+else
+ gcc_cv_tool_prefix=$exec_prefix
+fi
+
+# If there is no compiler in the tree, use the PATH only. In any
+# case, if there is no compiler in the tree nobody should use
+# AS_FOR_TARGET and LD_FOR_TARGET.
+if test x$host = x$build && test -f $srcdir/gcc/BASE-VER; then
+ gcc_version=`cat $srcdir/gcc/BASE-VER`
+ gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs/usr/lib/gcc/$target_noncanonical$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version$PATH_SEPARATOR"
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$gcc_cv_tool_prefix/$target_noncanonical/bin$PATH_SEPARATOR"
+else
+ gcc_cv_tool_dirs=
+fi
+
+if test x$build = x$target && test -n "$md_exec_prefix"; then
+ gcc_cv_tool_dirs="$gcc_cv_tool_dirs$md_exec_prefix$PATH_SEPARATOR"
+fi
+
+
+
+cat > conftest.c << \EOF
+#ifdef __GNUC__
+ gcc_yay;
+#endif
+EOF
+if ($GCC_FOR_TARGET -E conftest.c | grep gcc_yay) > /dev/null 2>&1; then
+ have_gcc_for_target=yes
+else
+ GCC_FOR_TARGET=${ncn_target_tool_prefix}gcc
+ have_gcc_for_target=no
+fi
+rm conftest.c
+
+
+
+
+if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5081: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/AR_FOR_TARGET
+ ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_AR_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ AR_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ar`
+ test $AR_FOR_TARGET=ar && AR_FOR_TARGET=
+ ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5095: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$AR_FOR_TARGET" in
+ /*)
+ ac_cv_path_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_AR_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+AR_FOR_TARGET="$ac_cv_path_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
fi
- for ncn_progname in gcc; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+fi
+if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in ar; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5132: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/AR_FOR_TARGET; then
+ ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/AR_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_AR_FOR_TARGET"; then
+ for ncn_progname in ar; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4877: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5149: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GCC_FOR_TARGET"; then
- ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_AR_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
-if test -n "$GCC_FOR_TARGET"; then
- echo "$ac_t""$GCC_FOR_TARGET" 1>&6
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ fi
+ if test -z "$ac_cv_prog_AR_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5180: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AR_FOR_TARGET"; then
+ ac_cv_prog_AR_FOR_TARGET="$AR_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AR_FOR_TARGET="${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AR_FOR_TARGET="$ac_cv_prog_AR_FOR_TARGET"
+if test -n "$AR_FOR_TARGET"; then
+ echo "$ac_t""$AR_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ test -n "$ac_cv_prog_AR_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
+ set dummy ar
+ if test $build = $target ; then
+ AR_FOR_TARGET="$2"
+ else
+ AR_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
- if test -z "$ac_cv_prog_GCC_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+fi
+
+fi
+
+
+
+
+if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5228: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/AS_FOR_TARGET
+ ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_AS_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ AS_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=as`
+ test $AS_FOR_TARGET=as && AS_FOR_TARGET=
+ ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5242: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$AS_FOR_TARGET" in
+ /*)
+ ac_cv_path_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_AS_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+AS_FOR_TARGET="$ac_cv_path_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in as; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5279: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/AS_FOR_TARGET; then
+ ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/AS_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_AS_FOR_TARGET"; then
+ for ncn_progname in as; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5296: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ if test -z "$ac_cv_prog_AS_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4908: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5327: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GCC_FOR_TARGET"; then
- ac_cv_prog_GCC_FOR_TARGET="$GCC_FOR_TARGET" # Let the user override the test.
+ if test -n "$AS_FOR_TARGET"; then
+ ac_cv_prog_AS_FOR_TARGET="$AS_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCC_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_AS_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-GCC_FOR_TARGET="$ac_cv_prog_GCC_FOR_TARGET"
-if test -n "$GCC_FOR_TARGET"; then
- echo "$ac_t""$GCC_FOR_TARGET" 1>&6
+AS_FOR_TARGET="$ac_cv_prog_AS_FOR_TARGET"
+if test -n "$AS_FOR_TARGET"; then
+ echo "$ac_t""$AS_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ fi
+ test -n "$ac_cv_prog_AS_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
+ set dummy as
+ if test $build = $target ; then
+ AS_FOR_TARGET="$2"
+ else
+ AS_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
- test -n "$ac_cv_prog_GCC_FOR_TARGET" && break
-done
+fi
-if test -z "$ac_cv_prog_GCC_FOR_TARGET" ; then
- GCC_FOR_TARGET="${CC_FOR_TARGET}"
fi
- for ncn_progname in gcj; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+
+
+
+if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5375: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/DLLTOOL_FOR_TARGET
+ ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_DLLTOOL_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ DLLTOOL_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=dlltool`
+ test $DLLTOOL_FOR_TARGET=dlltool && DLLTOOL_FOR_TARGET=
+ ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4947: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5389: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
-else
+ case "$DLLTOOL_FOR_TARGET" in
+ /*)
+ ac_cv_path_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCJ_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_path_DLLTOOL_FOR_TARGET="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
+ ;;
+esac
fi
-fi
-GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
-if test -n "$GCJ_FOR_TARGET"; then
- echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_path_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_GCJ_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
+fi
+if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in dlltool; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5426: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/DLLTOOL_FOR_TARGET; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/DLLTOOL_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET"; then
+ for ncn_progname in dlltool; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4978: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5443: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GCJ_FOR_TARGET"; then
- ac_cv_prog_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" # Let the user override the test.
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCJ_FOR_TARGET="${ncn_progname}"
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-GCJ_FOR_TARGET="$ac_cv_prog_GCJ_FOR_TARGET"
-if test -n "$GCJ_FOR_TARGET"; then
- echo "$ac_t""$GCJ_FOR_TARGET" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
- fi
- test -n "$ac_cv_prog_GCJ_FOR_TARGET" && break
-done
-
-if test -z "$ac_cv_prog_GCJ_FOR_TARGET" ; then
- set dummy gcj
- if test $build = $target ; then
- GCJ_FOR_TARGET="$2"
- else
- GCJ_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
-fi
- for ncn_progname in gfortran; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+ fi
+ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5022: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5474: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GFORTRAN_FOR_TARGET"; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
+ if test -n "$DLLTOOL_FOR_TARGET"; then
+ ac_cv_prog_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ ac_cv_prog_DLLTOOL_FOR_TARGET="${ncn_progname}"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
-if test -n "$GFORTRAN_FOR_TARGET"; then
- echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
+DLLTOOL_FOR_TARGET="$ac_cv_prog_DLLTOOL_FOR_TARGET"
+if test -n "$DLLTOOL_FOR_TARGET"; then
+ echo "$ac_t""$DLLTOOL_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+
+ fi
+ test -n "$ac_cv_prog_DLLTOOL_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
+ set dummy dlltool
+ if test $build = $target ; then
+ DLLTOOL_FOR_TARGET="$2"
+ else
+ DLLTOOL_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+fi
+
+fi
+
+
+
+if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5522: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/LD_FOR_TARGET
+ ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_LD_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ LD_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ld`
+ test $LD_FOR_TARGET=ld && LD_FOR_TARGET=
+ ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
fi
- if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
+fi
+if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
+ # Extract the first word of "ld", so it can be a program name with args.
+set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5053: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
+echo "configure:5536: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GFORTRAN_FOR_TARGET"; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" # Let the user override the test.
-else
+ case "$LD_FOR_TARGET" in
+ /*)
+ ac_cv_path_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_LD_FOR_TARGET="$LD_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GFORTRAN_FOR_TARGET="${ncn_progname}"
+ ac_cv_path_LD_FOR_TARGET="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
+ ;;
+esac
fi
-fi
-GFORTRAN_FOR_TARGET="$ac_cv_prog_GFORTRAN_FOR_TARGET"
-if test -n "$GFORTRAN_FOR_TARGET"; then
- echo "$ac_t""$GFORTRAN_FOR_TARGET" 1>&6
+LD_FOR_TARGET="$ac_cv_path_LD_FOR_TARGET"
+if test -n "$LD_FOR_TARGET"; then
+ echo "$ac_t""$LD_FOR_TARGET" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-
- fi
- test -n "$ac_cv_prog_GFORTRAN_FOR_TARGET" && break
-done
-if test -z "$ac_cv_prog_GFORTRAN_FOR_TARGET" ; then
- set dummy gfortran
- if test $build = $target ; then
- GFORTRAN_FOR_TARGET="$2"
- else
- GFORTRAN_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
+fi
+if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in ld; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5573: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/LD_FOR_TARGET; then
+ ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/LD_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
fi
- for ncn_progname in ld; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+if test -z "$ac_cv_prog_LD_FOR_TARGET"; then
+ for ncn_progname in ld; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5097: checking for $ac_word" >&5
+echo "configure:5590: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_LD_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_LD_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5128: checking for $ac_word" >&5
+echo "configure:5621: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_LD_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_LD_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
set dummy ld
if test $build = $target ; then
fi
fi
- for ncn_progname in lipo; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+fi
+
+
+
+
+if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5669: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/LIPO_FOR_TARGET
+ ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_LIPO_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ LIPO_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=lipo`
+ test $LIPO_FOR_TARGET=lipo && LIPO_FOR_TARGET=
+ ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5683: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_LIPO_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$LIPO_FOR_TARGET" in
+ /*)
+ ac_cv_path_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_LIPO_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+LIPO_FOR_TARGET="$ac_cv_path_LIPO_FOR_TARGET"
+if test -n "$LIPO_FOR_TARGET"; then
+ echo "$ac_t""$LIPO_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in lipo; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5720: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/LIPO_FOR_TARGET; then
+ ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/LIPO_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_LIPO_FOR_TARGET"; then
+ for ncn_progname in lipo; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5172: checking for $ac_word" >&5
+echo "configure:5737: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_LIPO_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5203: checking for $ac_word" >&5
+echo "configure:5768: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_LIPO_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_LIPO_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_LIPO_FOR_TARGET" ; then
set dummy lipo
if test $build = $target ; then
fi
fi
- for ncn_progname in nm; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+fi
+
+
+
+
+if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5816: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/NM_FOR_TARGET
+ ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_NM_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ NM_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=nm`
+ test $NM_FOR_TARGET=nm && NM_FOR_TARGET=
+ ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+ # Extract the first word of "nm", so it can be a program name with args.
+set dummy nm; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5830: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$NM_FOR_TARGET" in
+ /*)
+ ac_cv_path_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_NM_FOR_TARGET="$NM_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_NM_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+NM_FOR_TARGET="$ac_cv_path_NM_FOR_TARGET"
+if test -n "$NM_FOR_TARGET"; then
+ echo "$ac_t""$NM_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in nm; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5867: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/NM_FOR_TARGET; then
+ ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/NM_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_NM_FOR_TARGET"; then
+ for ncn_progname in nm; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5247: checking for $ac_word" >&5
+echo "configure:5884: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_NM_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_NM_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5278: checking for $ac_word" >&5
+echo "configure:5915: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_NM_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_NM_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
set dummy nm
if test $build = $target ; then
fi
fi
- for ncn_progname in objdump; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+fi
+
+
+
+
+if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:5963: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/OBJDUMP_FOR_TARGET
+ ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_OBJDUMP_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ OBJDUMP_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=objdump`
+ test $OBJDUMP_FOR_TARGET=objdump && OBJDUMP_FOR_TARGET=
+ ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5977: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$OBJDUMP_FOR_TARGET" in
+ /*)
+ ac_cv_path_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_OBJDUMP_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+OBJDUMP_FOR_TARGET="$ac_cv_path_OBJDUMP_FOR_TARGET"
+if test -n "$OBJDUMP_FOR_TARGET"; then
+ echo "$ac_t""$OBJDUMP_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in objdump; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6014: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/OBJDUMP_FOR_TARGET; then
+ ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/OBJDUMP_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET"; then
+ for ncn_progname in objdump; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5322: checking for $ac_word" >&5
+echo "configure:6031: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5353: checking for $ac_word" >&5
+echo "configure:6062: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_OBJDUMP_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_OBJDUMP_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" ; then
set dummy objdump
if test $build = $target ; then
fi
fi
- for ncn_progname in ranlib; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+fi
+
+
+
+
+if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6110: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/RANLIB_FOR_TARGET
+ ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_RANLIB_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ RANLIB_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=ranlib`
+ test $RANLIB_FOR_TARGET=ranlib && RANLIB_FOR_TARGET=
+ ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6124: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$RANLIB_FOR_TARGET" in
+ /*)
+ ac_cv_path_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_RANLIB_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+RANLIB_FOR_TARGET="$ac_cv_path_RANLIB_FOR_TARGET"
+if test -n "$RANLIB_FOR_TARGET"; then
+ echo "$ac_t""$RANLIB_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in ranlib; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6161: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/RANLIB_FOR_TARGET; then
+ ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/RANLIB_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET"; then
+ for ncn_progname in ranlib; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5397: checking for $ac_word" >&5
+echo "configure:6178: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5428: checking for $ac_word" >&5
+echo "configure:6209: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ fi
+ test -n "$ac_cv_prog_RANLIB_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
+ set dummy ranlib
+ if test $build = $target ; then
+ RANLIB_FOR_TARGET="$2"
+ else
+ RANLIB_FOR_TARGET="${ncn_target_tool_prefix}$2"
fi
- test -n "$ac_cv_prog_RANLIB_FOR_TARGET" && break
-done
+fi
-if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
- RANLIB_FOR_TARGET=":"
fi
- for ncn_progname in strip; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+
+
+
+if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6257: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/STRIP_FOR_TARGET
+ ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_STRIP_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ STRIP_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=strip`
+ test $STRIP_FOR_TARGET=strip && STRIP_FOR_TARGET=
+ ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6271: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$STRIP_FOR_TARGET" in
+ /*)
+ ac_cv_path_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_STRIP_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+STRIP_FOR_TARGET="$ac_cv_path_STRIP_FOR_TARGET"
+if test -n "$STRIP_FOR_TARGET"; then
+ echo "$ac_t""$STRIP_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in strip; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6308: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/STRIP_FOR_TARGET; then
+ ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/STRIP_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_STRIP_FOR_TARGET"; then
+ for ncn_progname in strip; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5467: checking for $ac_word" >&5
+echo "configure:6325: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_STRIP_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_STRIP_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5498: checking for $ac_word" >&5
+echo "configure:6356: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_STRIP_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_STRIP_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_STRIP_FOR_TARGET" ; then
set dummy strip
if test $build = $target ; then
fi
fi
- for ncn_progname in windres; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+fi
+
+
+
+
+if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ echo $ac_n "checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6404: checking for ${ncn_target_tool_prefix}${ncn_progname} in $with_build_time_tools" >&5
+ WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/WINDRES_FOR_TARGET
+ ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+ echo "$ac_t""$ac_cv_path_WINDRES_FOR_TARGET" 1>&6
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ WINDRES_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=windres`
+ test $WINDRES_FOR_TARGET=windres && WINDRES_FOR_TARGET=
+ ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
+ # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6418: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_WINDRES_FOR_TARGET'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$WINDRES_FOR_TARGET" in
+ /*)
+ ac_cv_path_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$gcc_cv_tool_dirs"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_WINDRES_FOR_TARGET="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+WINDRES_FOR_TARGET="$ac_cv_path_WINDRES_FOR_TARGET"
+if test -n "$WINDRES_FOR_TARGET"; then
+ echo "$ac_t""$WINDRES_FOR_TARGET" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ for ncn_progname in windres; do
+ echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
+echo "configure:6455: checking for ${ncn_progname} in $with_build_time_tools" >&5
+ if test -x $with_build_time_tools/WINDRES_FOR_TARGET; then
+ ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/WINDRES_FOR_TARGET
+ echo "$ac_t""yes" 1>&6
+ break
+ else
+ echo "$ac_t""no" 1>&6
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_WINDRES_FOR_TARGET"; then
+ for ncn_progname in windres; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5542: checking for $ac_word" >&5
+echo "configure:6472: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+ fi
+ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5573: checking for $ac_word" >&5
+echo "configure:6503: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- fi
- test -n "$ac_cv_prog_WINDRES_FOR_TARGET" && break
-done
-
+ fi
+ test -n "$ac_cv_prog_WINDRES_FOR_TARGET" && break
+ done
+fi
+
if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
set dummy windres
if test $build = $target ; then
fi
fi
+fi
+
RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
-echo "configure:5616: checking where to find the target ar" >&5
+echo "configure:6549: checking where to find the target ar" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $AR_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
AR_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ar'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $AR_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
AR_FOR_TARGET='$(AR)'
fi
fi
echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
-echo "configure:5641: checking where to find the target as" >&5
+echo "configure:6582: checking where to find the target as" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $AS_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gas/as-new'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $AS_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
AS_FOR_TARGET='$(AS)'
fi
fi
echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
-echo "configure:5666: checking where to find the target cc" >&5
+echo "configure:6615: checking where to find the target cc" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $CC_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $CC_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
CC_FOR_TARGET='$(CC)'
fi
fi
echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
-echo "configure:5691: checking where to find the target c++" >&5
+echo "configure:6648: checking where to find the target c++" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $CXX_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $CXX_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
CXX_FOR_TARGET='$(CXX)'
fi
fi
echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
-echo "configure:5719: checking where to find the target c++ for libstdc++" >&5
+echo "configure:6684: checking where to find the target c++ for libstdc++" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $RAW_CXX_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $RAW_CXX_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
RAW_CXX_FOR_TARGET='$(CXX)'
fi
fi
echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
-echo "configure:5747: checking where to find the target dlltool" >&5
+echo "configure:6720: checking where to find the target dlltool" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $DLLTOOL_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
DLLTOOL_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/dlltool'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $DLLTOOL_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
DLLTOOL_FOR_TARGET='$(DLLTOOL)'
fi
fi
echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
-echo "configure:5772: checking where to find the target gcc" >&5
+echo "configure:6753: checking where to find the target gcc" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GCC_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GCC_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
GCC_FOR_TARGET='$()'
fi
fi
echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
-echo "configure:5797: checking where to find the target gcj" >&5
+echo "configure:6786: checking where to find the target gcj" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GCJ_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GCJ_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
GCJ_FOR_TARGET='$(GCJ)'
fi
fi
echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
-echo "configure:5825: checking where to find the target gfortran" >&5
+echo "configure:6822: checking where to find the target gfortran" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GFORTRAN_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $GFORTRAN_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
GFORTRAN_FOR_TARGET='$(GFORTRAN)'
fi
fi
echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
-echo "configure:5853: checking where to find the target ld" >&5
+echo "configure:6858: checking where to find the target ld" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $LD_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/ld/ld-new'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $LD_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
LD_FOR_TARGET='$(LD)'
fi
fi
echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
-echo "configure:5878: checking where to find the target lipo" >&5
+echo "configure:6891: checking where to find the target lipo" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $LIPO_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
- if test "x$target" = "x$host"; then
+ if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $LIPO_FOR_TARGET`" 1>&6
+ elif test "x$target" = "x$host"; then
# We can use an host tool
LIPO_FOR_TARGET='$(LIPO)'
echo "$ac_t""host tool" 1>&6
fi
fi
echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
-echo "configure:5893: checking where to find the target nm" >&5
+echo "configure:6914: checking where to find the target nm" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $NM_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/nm-new'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $NM_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
NM_FOR_TARGET='$(NM)'
fi
fi
echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
-echo "configure:5918: checking where to find the target objdump" >&5
+echo "configure:6947: checking where to find the target objdump" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $OBJDUMP_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
OBJDUMP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objdump'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $OBJDUMP_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
OBJDUMP_FOR_TARGET='$(OBJDUMP)'
fi
fi
echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
-echo "configure:5943: checking where to find the target ranlib" >&5
+echo "configure:6980: checking where to find the target ranlib" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $RANLIB_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
RANLIB_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ranlib'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $RANLIB_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
RANLIB_FOR_TARGET='$(RANLIB)'
fi
fi
echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
-echo "configure:5968: checking where to find the target strip" >&5
+echo "configure:7013: checking where to find the target strip" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $STRIP_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
STRIP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/strip'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $STRIP_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
STRIP_FOR_TARGET='$(STRIP)'
fi
fi
echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
-echo "configure:5993: checking where to find the target windres" >&5
+echo "configure:7046: checking where to find the target windres" >&5
if test "x${build}" != "x${host}" ; then
- # Canadian cross, just use what we found
- echo "$ac_t""pre-installed" 1>&6
+ if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $WINDRES_FOR_TARGET`" 1>&6
+ else
+ # Canadian cross, just use what we found
+ echo "$ac_t""pre-installed" 1>&6
+ fi
else
ok=yes
case " ${configdirs} " in
# An in-tree tool is available and we can use it
WINDRES_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/windres'
echo "$ac_t""just compiled" 1>&6
+ elif expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ echo "$ac_t""pre-installed in `dirname $WINDRES_FOR_TARGET`" 1>&6
elif test "x$target" = "x$host"; then
# We can use an host tool
WINDRES_FOR_TARGET='$(WINDRES)'
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:6046: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7107: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section. Otherwise,
-# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
-t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
-t quote
-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
-t quote
-d
-: quote
-s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output. A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
# Without the "./", some shells look in PATH for config.status.
s%@OBJDUMP@%$OBJDUMP%g
s%@CXX@%$CXX%g
s%@CFLAGS_FOR_BUILD@%$CFLAGS_FOR_BUILD%g
-s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
-s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
s%@CC_FOR_TARGET@%$CC_FOR_TARGET%g
s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
-s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
s%@GCC_FOR_TARGET@%$GCC_FOR_TARGET%g
s%@GCJ_FOR_TARGET@%$GCJ_FOR_TARGET%g
s%@GFORTRAN_FOR_TARGET@%$GFORTRAN_FOR_TARGET%g
+s%@AR_FOR_TARGET@%$AR_FOR_TARGET%g
+s%@AS_FOR_TARGET@%$AS_FOR_TARGET%g
+s%@DLLTOOL_FOR_TARGET@%$DLLTOOL_FOR_TARGET%g
s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
s%@LIPO_FOR_TARGET@%$LIPO_FOR_TARGET%g
s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os target_noncanonical build_subdir host_subdir target_subdir GENINSRC CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT NO_MINUS_C_MINUS_O OUTPUT_OPTION CPP EGREP strict1_warn warn_cflags WERROR nocommon_flag TREEBROWSER valgrind_path valgrind_path_defines valgrind_command coverage_flags enable_multilib enable_decimal_float enable_shared TARGET_SYSTEM_ROOT TARGET_SYSTEM_ROOT_DEFINE CROSS_SYSTEM_HEADER_DIR onestep SET_MAKE AWK LN_S LN RANLIB ac_ct_RANLIB ranlib_flags INSTALL INSTALL_PROGRAM INSTALL_DATA make_compare_target have_mktemp_command MAKEINFO BUILD_INFO GENERATED_MANPAGES FLEX BISON NM AR stage1_cflags COLLECT2_LIBS GNAT_LIBEXC LDEXP_LIB TARGET_GETGROUPS_T LIBICONV LTLIBICONV LIBICONV_DEP manext objext gthread_flags extra_modes_file extra_opt_files USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS host_cc_for_libada CROSS ALL SYSTEM_HEADER_DIR inhibit_libc CC_FOR_BUILD BUILD_CFLAGS STMP_FIXINC STMP_FIXPROTO collect2 gcc_cv_as ORIGINAL_AS_FOR_TARGET gcc_cv_ld ORIGINAL_LD_FOR_TARGET gcc_cv_nm ORIGINAL_NM_FOR_TARGET gcc_cv_objdump ORIGINAL_OBJDUMP_FOR_TARGET libgcc_visibility GGC zlibdir zlibinc MAINT gcc_tooldir dollar slibdir objdir subdirs srcdir all_boot_languages all_compilers all_gtfiles all_gtfiles_files_langs all_gtfiles_files_files all_lang_makefrags all_lang_makefiles all_languages all_stagestuff build_exeext build_install_headers_dir build_xm_file_list build_xm_include_list build_xm_defines check_languages cc_set_by_configure quoted_cc_set_by_configure cpp_install_dir xmake_file tmake_file extra_gcc_objs extra_headers_list extra_objs extra_parts extra_passes extra_programs float_h_file gcc_config_arguments gcc_gxx_include_dir libstdcxx_incdir host_exeext host_xm_file_list host_xm_include_list host_xm_defines out_host_hook_obj install lang_opt_files lang_specs_files lang_tree_files local_prefix md_file objc_boehm_gc out_file out_object_file stage_prefix_set_by_configure quoted_stage_prefix_set_by_configure thread_file tm_file_list tm_include_list tm_defines tm_p_file_list tm_p_include_list xm_file_list xm_include_list xm_defines c_target_objs cxx_target_objs target_cpu_default GMPLIBS GMPINC LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os target_noncanonical build_subdir host_subdir target_subdir GENINSRC CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT NO_MINUS_C_MINUS_O OUTPUT_OPTION CPP EGREP strict1_warn warn_cflags WERROR nocommon_flag TREEBROWSER valgrind_path valgrind_path_defines valgrind_command coverage_flags enable_multilib enable_decimal_float enable_shared TARGET_SYSTEM_ROOT TARGET_SYSTEM_ROOT_DEFINE CROSS_SYSTEM_HEADER_DIR onestep SET_MAKE AWK LN_S LN RANLIB ac_ct_RANLIB ranlib_flags INSTALL INSTALL_PROGRAM INSTALL_DATA make_compare_target have_mktemp_command MAKEINFO BUILD_INFO GENERATED_MANPAGES FLEX BISON NM AR stage1_cflags COLLECT2_LIBS GNAT_LIBEXC LDEXP_LIB TARGET_GETGROUPS_T LIBICONV LTLIBICONV LIBICONV_DEP manext objext gthread_flags extra_modes_file extra_opt_files USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS host_cc_for_libada CROSS ALL SYSTEM_HEADER_DIR inhibit_libc CC_FOR_BUILD BUILD_CFLAGS STMP_FIXINC STMP_FIXPROTO collect2 gcc_cv_as ORIGINAL_AS_FOR_TARGET gcc_cv_ld ORIGINAL_LD_FOR_TARGET gcc_cv_nm ORIGINAL_NM_FOR_TARGET gcc_cv_objdump libgcc_visibility GGC zlibdir zlibinc MAINT gcc_tooldir dollar slibdir objdir subdirs srcdir all_boot_languages all_compilers all_gtfiles all_gtfiles_files_langs all_gtfiles_files_files all_lang_makefrags all_lang_makefiles all_languages all_stagestuff build_exeext build_install_headers_dir build_xm_file_list build_xm_include_list build_xm_defines check_languages cc_set_by_configure quoted_cc_set_by_configure cpp_install_dir xmake_file tmake_file extra_gcc_objs extra_headers_list extra_objs extra_parts extra_passes extra_programs float_h_file gcc_config_arguments gcc_gxx_include_dir libstdcxx_incdir host_exeext host_xm_file_list host_xm_include_list host_xm_defines out_host_hook_obj install lang_opt_files lang_specs_files lang_tree_files local_prefix md_file objc_boehm_gc out_file out_object_file stage_prefix_set_by_configure quoted_stage_prefix_set_by_configure thread_file tm_file_list tm_include_list tm_defines tm_p_file_list tm_p_include_list xm_file_list xm_include_list xm_defines c_target_objs cxx_target_objs target_cpu_default GMPLIBS GMPINC LIBOBJS LTLIBOBJS'
ac_subst_files='language_hooks'
# Initialize some variables set by options.
else
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
fi
- cd $ac_popdir
+ cd "$ac_popdir"
done
fi
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+ { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
{ (exit 1); exit 1; }; }
else
cat >conftest.$ac_ext <<_ACEOF
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+ { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
{ (exit 1); exit 1; }; }
else
cat >conftest.$ac_ext <<_ACEOF
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+ { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
{ (exit 1); exit 1; }; }
else
cat >conftest.$ac_ext <<_ACEOF
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+ { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
{ (exit 1); exit 1; }; }
else
cat >conftest.$ac_ext <<_ACEOF
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+ { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
{ (exit 1); exit 1; }; }
else
cat >conftest.$ac_ext <<_ACEOF
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+ { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
{ (exit 1); exit 1; }; }
else
cat >conftest.$ac_ext <<_ACEOF
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
else
ac_prog_version=`$MAKEINFO --version 2>&1 |
sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
- echo "configure:7535: version of makeinfo is $ac_prog_version" >&5
+ echo "configure:7471: version of makeinfo is $ac_prog_version" >&5
case $ac_prog_version in
'') gcc_cv_prog_makeinfo_modern=no;;
4.[4-9]*)
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
ac_cv_func_fork_works=cross
else
cat >conftest.$ac_ext <<_ACEOF
-/* By Ruediger Kuhlmann. */
- #include <sys/types.h>
- #if HAVE_UNISTD_H
- # include <unistd.h>
- #endif
- /* Some systems only have a dummy stub for fork() */
- int main ()
- {
- if (fork() < 0)
- exit (1);
- exit (0);
- }
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+
+ /* By Ruediger Kuhlmann. */
+ if (fork() < 0)
+ exit (1);
+ exit (0);
+
+ ;
+ return 0;
+}
_ACEOF
rm -f conftest$ac_exeext
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
# If build != host, and we aren't building gas in-tree, we identify a
# build->target assembler and hope that it will have the same features
# as the host->target assembler we'll be using.
-in_tree_gas=no
-gcc_cv_as=
gcc_cv_gas_major_version=
gcc_cv_gas_minor_version=
gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
+
+if test "${gcc_cv_as+set}" = set; then
+ :
+else
+
if test -x "$DEFAULT_ASSEMBLER"; then
gcc_cv_as="$DEFAULT_ASSEMBLER"
elif test -f $gcc_cv_as_gas_srcdir/configure.in \
&& test -f ../gas/Makefile \
&& test x$build = x$host; then
+ gcc_cv_as=../gas/as-new$build_exeext
+elif test -x as$build_exeext; then
+ # Build using assembler in the current directory.
+ gcc_cv_as=./as$build_exeext
+elif test -x $AS_FOR_TARGET; then
+ gcc_cv_as="$AS_FOR_TARGET"
+else
+ # Extract the first word of "$AS_FOR_TARGET", so it can be a program name with args.
+set dummy $AS_FOR_TARGET; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_gcc_cv_as+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $gcc_cv_as in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_gcc_cv_as="$gcc_cv_as" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_gcc_cv_as="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+gcc_cv_as=$ac_cv_path_gcc_cv_as
+
+if test -n "$gcc_cv_as"; then
+ echo "$as_me:$LINENO: result: $gcc_cv_as" >&5
+echo "${ECHO_T}$gcc_cv_as" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+fi
+
+
+ORIGINAL_AS_FOR_TARGET=$gcc_cv_as
+
+
+echo "$as_me:$LINENO: checking what assembler to use" >&5
+echo $ECHO_N "checking what assembler to use... $ECHO_C" >&6
+if test "$gcc_cv_as" = ../gas/as-new$build_exeext; then
# Single tree build which includes gas. We want to prefer it
# over whatever linker top-level may have detected, since
# we'll use what we're building after installation anyway.
+ echo "$as_me:$LINENO: result: newly built gas" >&5
+echo "${ECHO_T}newly built gas" >&6
in_tree_gas=yes
gcc_cv_as_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
for f in $gcc_cv_as_bfd_srcdir/configure \
+ $gcc_cv_gas_minor_version \) \* 1000 \
+ $gcc_cv_gas_patch_version`
- gcc_cv_as=../gas/as-new$build_exeext
in_tree_gas_is_elf=no
if grep 'obj_format = elf' ../gas/Makefile > /dev/null \
|| (grep 'obj_format = multi' ../gas/Makefile \
then
in_tree_gas_is_elf=yes
fi
-elif test -x as$build_exeext; then
- # Build using assembler in the current directory.
- gcc_cv_as=./as$build_exeext
+else
+ echo "$as_me:$LINENO: result: $gcc_cv_as" >&5
+echo "${ECHO_T}$gcc_cv_as" >&6
+ in_tree_gas=no
fi
-
-# When searching for the assembler or linker, search the same directories
-# that the installed compiler will search. Else we may find the wrong
-# assembler or linker and lose. If we do not find a suitable binary,
-# then try the user's path.
+# Identify the linker which will work hand-in-glove with the newly
+# built GCC, so that we can examine its features. This is the linker
+# which will be driven by the driver program.
#
-# Also note we have to check MD_EXEC_PREFIX before checking the user's path.
-if test "x$exec_prefix" = xNONE; then
- if test "x$prefix" = xNONE; then
- gcc_cv_tool_prefix=/usr/local
- else
- gcc_cv_tool_prefix=$prefix
- fi
-else
- gcc_cv_tool_prefix=$exec_prefix
-fi
+# If build != host, and we aren't building gas in-tree, we identify a
+# build->target linker and hope that it will have the same features
+# as the host->target linker we'll be using.
+gcc_cv_gld_major_version=
+gcc_cv_gld_minor_version=
+gcc_cv_ld_gld_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/ld
+gcc_cv_ld_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
-if test x$host = x$build; then
- gcc_cv_tool_dirs="$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical/$gcc_version"
- gcc_cv_tool_dirs="$gcc_cv_tool_dirs$PATH_SEPARATOR$gcc_cv_tool_prefix/libexec/gcc/$target_noncanonical"
- gcc_cv_tool_dirs="$gcc_cv_tool_dirs$PATH_SEPARATOR/usr/lib/gcc/$target_noncanonical/$gcc_version"
- gcc_cv_tool_dirs="$gcc_cv_tool_dirs$PATH_SEPARATOR/usr/lib/gcc/$target_noncanonical"
- gcc_cv_tool_dirs="$gcc_cv_tool_dirs$PATH_SEPARATOR$gcc_cv_tool_prefix/$target_noncanonical/bin/$target_noncanonical/$gcc_version"
- gcc_cv_tool_dirs="$gcc_cv_tool_dirs$PATH_SEPARATOR$gcc_cv_tool_prefix/$target_noncanonical/bin"
+if test "${gcc_cv_ld+set}" = set; then
+ :
else
- gcc_cv_tool_dirs=
-fi
-
-if test x$build = x$target; then
- # Rummage through tm_files looking for MD_EXEC_PREFIX
- md_dirs=
- for f in ${tm_file_list}; do
- if test -f $f; then
- if grep '^#[ ]*undef[ ]*MD_EXEC_PREFIX' $f > /dev/null; then
- md_dirs=
- fi
- md_dirs="$md_dirs "`sed -n -e 's@^#[ ]*define[ ]*MD_EXEC_PREFIX[ ]*"\(.*\)/"@\1@p' < $f`
- fi
- done
- for f in ${md_dirs}; do
- gcc_cv_tool_dirs="$gcc_cv_tool_dirs$PATH_SEPARATOR$f"
- done
-fi
-
-
-
-exec 6>/dev/null
-
-# First try the environment variables. Handle full paths or basenames.
-if test "x$gcc_cv_as" = x && test -n "$AS_FOR_TARGET"; then
- # Extract the first word of "$AS_FOR_TARGET", so it can be a program name with args.
-set dummy $AS_FOR_TARGET; ac_word=$2
+if test -x "$DEFAULT_LINKER"; then
+ gcc_cv_ld="$DEFAULT_LINKER"
+elif test -f $gcc_cv_ld_gld_srcdir/configure.in \
+ && test -f ../ld/Makefile \
+ && test x$build = x$host; then
+ gcc_cv_ld=../ld/ld-new$build_exeext
+elif test -x collect-ld$build_exeext; then
+ # Build using linker in the current directory.
+ gcc_cv_ld=./collect-ld$build_exeext
+elif test -x $LD_FOR_TARGET; then
+ gcc_cv_ld="$LD_FOR_TARGET"
+else
+ # Extract the first word of "$LD_FOR_TARGET", so it can be a program name with args.
+set dummy $LD_FOR_TARGET; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_as+set}" = set; then
+if test "${ac_cv_path_gcc_cv_ld+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- case $gcc_cv_as in
+ case $gcc_cv_ld in
[\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_as="$gcc_cv_as" # Let the user override the test with a path.
+ ac_cv_path_gcc_cv_ld="$gcc_cv_ld" # Let the user override the test with a path.
;;
*)
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_as="$as_dir/$ac_word$ac_exec_ext"
+ ac_cv_path_gcc_cv_ld="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
;;
esac
fi
-gcc_cv_as=$ac_cv_path_gcc_cv_as
+gcc_cv_ld=$ac_cv_path_gcc_cv_ld
-if test -n "$gcc_cv_as"; then
- echo "$as_me:$LINENO: result: $gcc_cv_as" >&5
-echo "${ECHO_T}$gcc_cv_as" >&6
+if test -n "$gcc_cv_ld"; then
+ echo "$as_me:$LINENO: result: $gcc_cv_ld" >&5
+echo "${ECHO_T}$gcc_cv_ld" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
-if test "x$gcc_cv_as" = x && test -n "$AS" && test x$host = x$target; then
- # Extract the first word of "$AS", so it can be a program name with args.
-set dummy $AS; ac_word=$2
+fi
+
+
+ORIGINAL_LD_FOR_TARGET=$gcc_cv_ld
+
+
+echo "$as_me:$LINENO: checking what linker to use" >&5
+echo $ECHO_N "checking what linker to use... $ECHO_C" >&6
+if test "$gcc_cv_ld" = ../ld/ld-new$build_exeext; then
+ # Single tree build which includes ld. We want to prefer it
+ # over whatever linker top-level may have detected, since
+ # we'll use what we're building after installation anyway.
+ echo "$as_me:$LINENO: result: newly built ld" >&5
+echo "${ECHO_T}newly built ld" >&6
+ in_tree_ld=yes
+ in_tree_ld_is_elf=no
+ if (grep 'EMUL = .*elf' ../ld/Makefile \
+ || grep 'EMUL = .*linux' ../ld/Makefile \
+ || grep 'EMUL = .*lynx' ../ld/Makefile) > /dev/null; then
+ in_tree_ld_is_elf=yes
+ fi
+ for f in $gcc_cv_ld_bfd_srcdir/configure $gcc_cv_ld_gld_srcdir/configure $gcc_cv_ld_gld_srcdir/configure.in $gcc_cv_ld_gld_srcdir/Makefile.in
+ do
+ gcc_cv_gld_version=`sed -n -e 's/^[ ]*\(VERSION=[0-9]*\.[0-9]*.*\)/\1/p' < $f`
+ if test x$gcc_cv_gld_version != x; then
+ break
+ fi
+ done
+ gcc_cv_gld_major_version=`expr "$gcc_cv_gld_version" : "VERSION=\([0-9]*\)"`
+ gcc_cv_gld_minor_version=`expr "$gcc_cv_gld_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
+else
+ echo "$as_me:$LINENO: result: $gcc_cv_ld" >&5
+echo "${ECHO_T}$gcc_cv_ld" >&6
+ in_tree_ld=no
+fi
+
+# Figure out what nm we will be using.
+gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
+if test "${gcc_cv_nm+set}" = set; then
+ :
+else
+
+if test -f $gcc_cv_binutils_srcdir/configure.in \
+ && test -f ../binutils/Makefile; then
+ gcc_cv_nm=../binutils/nm-new$build_exeext
+elif test -x nm$build_exeext; then
+ gcc_cv_nm=./nm$build_exeext
+elif test -x $NM_FOR_TARGET; then
+ gcc_cv_nm="$NM_FOR_TARGET"
+else
+ # Extract the first word of "$NM_FOR_TARGET", so it can be a program name with args.
+set dummy $NM_FOR_TARGET; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_as+set}" = set; then
+if test "${ac_cv_path_gcc_cv_nm+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- case $gcc_cv_as in
+ case $gcc_cv_nm in
[\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_as="$gcc_cv_as" # Let the user override the test with a path.
+ ac_cv_path_gcc_cv_nm="$gcc_cv_nm" # Let the user override the test with a path.
;;
*)
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_as="$as_dir/$ac_word$ac_exec_ext"
+ ac_cv_path_gcc_cv_nm="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
;;
esac
fi
-gcc_cv_as=$ac_cv_path_gcc_cv_as
+gcc_cv_nm=$ac_cv_path_gcc_cv_nm
-if test -n "$gcc_cv_as"; then
- echo "$as_me:$LINENO: result: $gcc_cv_as" >&5
-echo "${ECHO_T}$gcc_cv_as" >&6
+if test -n "$gcc_cv_nm"; then
+ echo "$as_me:$LINENO: result: $gcc_cv_nm" >&5
+echo "${ECHO_T}$gcc_cv_nm" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
fi
+fi
-if test "x$gcc_cv_as" = x; then
- # The AC_PATH_PROGS macro doesn't work properly when its 4th argument
- # is empty.
- if test "x$gcc_cv_tool_dirs" = x; then
- gcc_cv_as=
- else
- for ac_prog in as
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
+
+echo "$as_me:$LINENO: checking what nm to use" >&5
+echo $ECHO_N "checking what nm to use... $ECHO_C" >&6
+if test "$gcc_cv_nm" = ../binutils/nm-new$build_exeext; then
+ # Single tree build which includes binutils.
+ echo "$as_me:$LINENO: result: newly built nm" >&5
+echo "${ECHO_T}newly built nm" >&6
+ in_tree_nm=yes
+else
+ echo "$as_me:$LINENO: result: $gcc_cv_nm" >&5
+echo "${ECHO_T}$gcc_cv_nm" >&6
+ in_tree_nm=no
+fi
+
+ORIGINAL_NM_FOR_TARGET=$gcc_cv_nm
+
+
+# Figure out what objdump we will be using.
+if test "${gcc_cv_objdump+set}" = set; then
+ :
+else
+
+if test -f $gcc_cv_binutils_srcdir/configure.in \
+ && test -f ../binutils/Makefile; then
+ # Single tree build which includes binutils.
+ gcc_cv_objdump=../binutils/objdump$build_exeext
+elif test -x objdump$build_exeext; then
+ gcc_cv_objdump=./objdump$build_exeext
+elif test -x $OBJDUMP_FOR_TARGET; then
+ gcc_cv_objdump="$OBJDUMP_FOR_TARGET"
+else
+ # Extract the first word of "$OBJDUMP_FOR_TARGET", so it can be a program name with args.
+set dummy $OBJDUMP_FOR_TARGET; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_as+set}" = set; then
+if test "${ac_cv_path_gcc_cv_objdump+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- case $gcc_cv_as in
+ case $gcc_cv_objdump in
[\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_as="$gcc_cv_as" # Let the user override the test with a path.
+ ac_cv_path_gcc_cv_objdump="$gcc_cv_objdump" # Let the user override the test with a path.
;;
*)
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $gcc_cv_tool_dirs
+for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_as="$as_dir/$ac_word$ac_exec_ext"
+ ac_cv_path_gcc_cv_objdump="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
;;
esac
fi
-gcc_cv_as=$ac_cv_path_gcc_cv_as
+gcc_cv_objdump=$ac_cv_path_gcc_cv_objdump
-if test -n "$gcc_cv_as"; then
- echo "$as_me:$LINENO: result: $gcc_cv_as" >&5
-echo "${ECHO_T}$gcc_cv_as" >&6
+if test -n "$gcc_cv_objdump"; then
+ echo "$as_me:$LINENO: result: $gcc_cv_objdump" >&5
+echo "${ECHO_T}$gcc_cv_objdump" >&6
else
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi
- test -n "$gcc_cv_as" && break
-done
+fi
+fi
- fi
+
+echo "$as_me:$LINENO: checking what objdump to use" >&5
+echo $ECHO_N "checking what objdump to use... $ECHO_C" >&6
+if test "$gcc_cv_objdump" = ../binutils/objdump$build_exeext; then
+ # Single tree build which includes binutils.
+ echo "$as_me:$LINENO: result: newly built objdump" >&5
+echo "${ECHO_T}newly built objdump" >&6
+elif test x$gcc_cv_objdump = x; then
+ echo "$as_me:$LINENO: result: not found" >&5
+echo "${ECHO_T}not found" >&6
+else
+ echo "$as_me:$LINENO: result: $gcc_cv_objdump" >&5
+echo "${ECHO_T}$gcc_cv_objdump" >&6
fi
-if test "x$gcc_cv_as" = x; then
- # If the loop above did not find a tool, then use whatever
- # one we can find in the users's path. We are looking for a
- # ${build} -> ${target} tool.
- if test "x$program_prefix" != xNONE; then
- default_tool_name=${program_prefix}as
- elif test x$build != x$host && test x$build != x$target; then
- default_tool_name=${target_noncanonical}-as
- else
- default_tool_name=`echo as | sed "${program_transform_name}"`
- fi
- for ac_prog in $default_tool_name
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_as+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $gcc_cv_as in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_as="$gcc_cv_as" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_as="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-gcc_cv_as=$ac_cv_path_gcc_cv_as
-
-if test -n "$gcc_cv_as"; then
- echo "$as_me:$LINENO: result: $gcc_cv_as" >&5
-echo "${ECHO_T}$gcc_cv_as" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$gcc_cv_as" && break
-done
-test -n "$gcc_cv_as" || gcc_cv_as="$gcc_cv_tool_prefix/bin/$default_tool_name$build_exeext"
-
-fi
-test "$silent" != yes && exec 6>&1
-
-ORIGINAL_AS_FOR_TARGET="$gcc_cv_as"
-
-echo "$as_me:$LINENO: checking what assembler to use" >&5
-echo $ECHO_N "checking what assembler to use... $ECHO_C" >&6
-case $in_tree_gas in
- yes)
- echo "$as_me:$LINENO: result: \"newly built gas\"" >&5
-echo "${ECHO_T}\"newly built gas\"" >&6
- ;;
- no)
- echo "$as_me:$LINENO: result: $gcc_cv_as" >&5
-echo "${ECHO_T}$gcc_cv_as" >&6
- ;;
-esac
-
-# Identify the linker which will work hand-in-glove with the newly
-# built GCC, so that we can examine its features. This is the linker
-# which will be driven by the driver program.
-#
-# If build != host, and we aren't building gas in-tree, we identify a
-# build->target linker and hope that it will have the same features
-# as the host->target linker we'll be using.
-in_tree_ld=no
-gcc_cv_ld=
-gcc_cv_gld_major_version=
-gcc_cv_gld_minor_version=
-gcc_cv_ld_gld_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/ld
-gcc_cv_ld_bfd_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/bfd
-if test -x "$DEFAULT_LINKER"; then
- gcc_cv_ld="$DEFAULT_LINKER"
-elif test -f $gcc_cv_ld_gld_srcdir/configure.in \
- && test -f ../ld/Makefile \
- && test x$build = x$host; then
- # Single tree build which includes ld. We want to prefer it
- # over whatever linker top-level may have detected, since
- # we'll use what we're building after installation anyway.
- in_tree_ld=yes
- in_tree_ld_is_elf=no
- if (grep 'EMUL = .*elf' ../ld/Makefile \
- || grep 'EMUL = .*linux' ../ld/Makefile \
- || grep 'EMUL = .*lynx' ../ld/Makefile) > /dev/null; then
- in_tree_ld_is_elf=yes
- fi
- for f in $gcc_cv_ld_bfd_srcdir/configure $gcc_cv_ld_gld_srcdir/configure $gcc_cv_ld_gld_srcdir/configure.in $gcc_cv_ld_gld_srcdir/Makefile.in
- do
- gcc_cv_gld_version=`sed -n -e 's/^[ ]*\(VERSION=[0-9]*\.[0-9]*.*\)/\1/p' < $f`
- if test x$gcc_cv_gld_version != x; then
- break
- fi
- done
- gcc_cv_gld_major_version=`expr "$gcc_cv_gld_version" : "VERSION=\([0-9]*\)"`
- gcc_cv_gld_minor_version=`expr "$gcc_cv_gld_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
- gcc_cv_ld=../ld/ld-new$build_exeext
-elif test -x collect-ld$build_exeext; then
- # Build using linker in the current directory.
- gcc_cv_ld=./collect-ld$build_exeext
-fi
-
-
-
-
-
-exec 6>/dev/null
-
-# First try the environment variables. Handle full paths or basenames.
-if test "x$gcc_cv_ld" = x && test -n "$LD_FOR_TARGET"; then
- # Extract the first word of "$LD_FOR_TARGET", so it can be a program name with args.
-set dummy $LD_FOR_TARGET; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_ld+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $gcc_cv_ld in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_ld="$gcc_cv_ld" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_ld="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-gcc_cv_ld=$ac_cv_path_gcc_cv_ld
-
-if test -n "$gcc_cv_ld"; then
- echo "$as_me:$LINENO: result: $gcc_cv_ld" >&5
-echo "${ECHO_T}$gcc_cv_ld" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test "x$gcc_cv_ld" = x && test -n "$LD" && test x$host = x$target; then
- # Extract the first word of "$LD", so it can be a program name with args.
-set dummy $LD; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_ld+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $gcc_cv_ld in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_ld="$gcc_cv_ld" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_ld="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-gcc_cv_ld=$ac_cv_path_gcc_cv_ld
-
-if test -n "$gcc_cv_ld"; then
- echo "$as_me:$LINENO: result: $gcc_cv_ld" >&5
-echo "${ECHO_T}$gcc_cv_ld" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-
-if test "x$gcc_cv_ld" = x; then
- # The AC_PATH_PROGS macro doesn't work properly when its 4th argument
- # is empty.
- if test "x$gcc_cv_tool_dirs" = x; then
- gcc_cv_ld=
- else
- for ac_prog in ld
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_ld+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $gcc_cv_ld in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_ld="$gcc_cv_ld" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $gcc_cv_tool_dirs
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_ld="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-gcc_cv_ld=$ac_cv_path_gcc_cv_ld
-
-if test -n "$gcc_cv_ld"; then
- echo "$as_me:$LINENO: result: $gcc_cv_ld" >&5
-echo "${ECHO_T}$gcc_cv_ld" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$gcc_cv_ld" && break
-done
-
- fi
-fi
-if test "x$gcc_cv_ld" = x; then
- # If the loop above did not find a tool, then use whatever
- # one we can find in the users's path. We are looking for a
- # ${build} -> ${target} tool.
- if test "x$program_prefix" != xNONE; then
- default_tool_name=${program_prefix}ld
- elif test x$build != x$host && test x$build != x$target; then
- default_tool_name=${target_noncanonical}-ld
- else
- default_tool_name=`echo ld | sed "${program_transform_name}"`
- fi
- for ac_prog in $default_tool_name
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_ld+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $gcc_cv_ld in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_ld="$gcc_cv_ld" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_ld="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-gcc_cv_ld=$ac_cv_path_gcc_cv_ld
-
-if test -n "$gcc_cv_ld"; then
- echo "$as_me:$LINENO: result: $gcc_cv_ld" >&5
-echo "${ECHO_T}$gcc_cv_ld" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$gcc_cv_ld" && break
-done
-test -n "$gcc_cv_ld" || gcc_cv_ld="$gcc_cv_tool_prefix/bin/$default_tool_name$build_exeext"
-
-fi
-test "$silent" != yes && exec 6>&1
-
-ORIGINAL_LD_FOR_TARGET="$gcc_cv_ld"
-
-echo "$as_me:$LINENO: checking what linker to use" >&5
-echo $ECHO_N "checking what linker to use... $ECHO_C" >&6
-case $in_tree_ld in
- yes)
- echo "$as_me:$LINENO: result: \"newly built ld\"" >&5
-echo "${ECHO_T}\"newly built ld\"" >&6
- ;;
- no)
- echo "$as_me:$LINENO: result: $gcc_cv_ld" >&5
-echo "${ECHO_T}$gcc_cv_ld" >&6
- ;;
-esac
-
-# Figure out what nm we will be using.
-gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
-in_tree_nm=no
-gcc_cv_nm=
-if test -f $gcc_cv_binutils_srcdir/configure.in \
- && test -f ../binutils/Makefile; then
- # Single tree build which includes binutils.
- in_tree_nm=yes
- gcc_cv_nm=../binutils/nm-new$build_exeext
-elif test -x nm$build_exeext; then
- gcc_cv_nm=./nm$build_exeext
-fi
-
-
-
-
-
-exec 6>/dev/null
-
-# First try the environment variables. Handle full paths or basenames.
-if test "x$gcc_cv_nm" = x && test -n "$NM_FOR_TARGET"; then
- # Extract the first word of "$NM_FOR_TARGET", so it can be a program name with args.
-set dummy $NM_FOR_TARGET; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_nm+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $gcc_cv_nm in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_nm="$gcc_cv_nm" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_nm="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-gcc_cv_nm=$ac_cv_path_gcc_cv_nm
-
-if test -n "$gcc_cv_nm"; then
- echo "$as_me:$LINENO: result: $gcc_cv_nm" >&5
-echo "${ECHO_T}$gcc_cv_nm" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test "x$gcc_cv_nm" = x && test -n "$NM" && test x$host = x$target; then
- # Extract the first word of "$NM", so it can be a program name with args.
-set dummy $NM; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_nm+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $gcc_cv_nm in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_nm="$gcc_cv_nm" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_nm="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-gcc_cv_nm=$ac_cv_path_gcc_cv_nm
-
-if test -n "$gcc_cv_nm"; then
- echo "$as_me:$LINENO: result: $gcc_cv_nm" >&5
-echo "${ECHO_T}$gcc_cv_nm" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-
-if test "x$gcc_cv_nm" = x; then
- # The AC_PATH_PROGS macro doesn't work properly when its 4th argument
- # is empty.
- if test "x$gcc_cv_tool_dirs" = x; then
- gcc_cv_nm=
- else
- for ac_prog in nm
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_nm+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $gcc_cv_nm in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_nm="$gcc_cv_nm" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $gcc_cv_tool_dirs
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_nm="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-gcc_cv_nm=$ac_cv_path_gcc_cv_nm
-
-if test -n "$gcc_cv_nm"; then
- echo "$as_me:$LINENO: result: $gcc_cv_nm" >&5
-echo "${ECHO_T}$gcc_cv_nm" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$gcc_cv_nm" && break
-done
-
- fi
-fi
-if test "x$gcc_cv_nm" = x; then
- # If the loop above did not find a tool, then use whatever
- # one we can find in the users's path. We are looking for a
- # ${build} -> ${target} tool.
- if test "x$program_prefix" != xNONE; then
- default_tool_name=${program_prefix}nm
- elif test x$build != x$host && test x$build != x$target; then
- default_tool_name=${target_noncanonical}-nm
- else
- default_tool_name=`echo nm | sed "${program_transform_name}"`
- fi
- for ac_prog in $default_tool_name
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_nm+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $gcc_cv_nm in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_nm="$gcc_cv_nm" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_nm="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-gcc_cv_nm=$ac_cv_path_gcc_cv_nm
-
-if test -n "$gcc_cv_nm"; then
- echo "$as_me:$LINENO: result: $gcc_cv_nm" >&5
-echo "${ECHO_T}$gcc_cv_nm" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$gcc_cv_nm" && break
-done
-test -n "$gcc_cv_nm" || gcc_cv_nm="$gcc_cv_tool_prefix/bin/$default_tool_name$build_exeext"
-
-fi
-test "$silent" != yes && exec 6>&1
-
-ORIGINAL_NM_FOR_TARGET="$gcc_cv_nm"
-
-echo "$as_me:$LINENO: checking what nm to use" >&5
-echo $ECHO_N "checking what nm to use... $ECHO_C" >&6
-case $in_tree_nm in
- yes) echo "$as_me:$LINENO: result: \"newly built nm\"" >&5
-echo "${ECHO_T}\"newly built nm\"" >&6 ;;
- no) echo "$as_me:$LINENO: result: $gcc_cv_nm" >&5
-echo "${ECHO_T}$gcc_cv_nm" >&6 ;;
-esac
-
-# Figure out what objdump we will be using.
-in_tree_objdump=no
-gcc_cv_objdump=
-if test -f $gcc_cv_binutils_srcdir/configure.in \
- && test -f ../binutils/Makefile; then
- # Single tree build which includes binutils.
- in_tree_objdump=yes
- gcc_cv_objdump=../binutils/objdump$build_exeext
-elif test -x objdump$build_exeext; then
- gcc_cv_objdump=./objdump$build_exeext
-fi
-
-
-
-
-
-exec 6>/dev/null
-
-# First try the environment variables. Handle full paths or basenames.
-if test "x$gcc_cv_objdump" = x && test -n "$OBJDUMP_FOR_TARGET"; then
- # Extract the first word of "$OBJDUMP_FOR_TARGET", so it can be a program name with args.
-set dummy $OBJDUMP_FOR_TARGET; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_objdump+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $gcc_cv_objdump in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_objdump="$gcc_cv_objdump" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_objdump="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-gcc_cv_objdump=$ac_cv_path_gcc_cv_objdump
-
-if test -n "$gcc_cv_objdump"; then
- echo "$as_me:$LINENO: result: $gcc_cv_objdump" >&5
-echo "${ECHO_T}$gcc_cv_objdump" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test "x$gcc_cv_objdump" = x && test -n "$OBJDUMP" && test x$host = x$target; then
- # Extract the first word of "$OBJDUMP", so it can be a program name with args.
-set dummy $OBJDUMP; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_objdump+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $gcc_cv_objdump in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_objdump="$gcc_cv_objdump" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_objdump="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-gcc_cv_objdump=$ac_cv_path_gcc_cv_objdump
-
-if test -n "$gcc_cv_objdump"; then
- echo "$as_me:$LINENO: result: $gcc_cv_objdump" >&5
-echo "${ECHO_T}$gcc_cv_objdump" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-
-if test "x$gcc_cv_objdump" = x; then
- # The AC_PATH_PROGS macro doesn't work properly when its 4th argument
- # is empty.
- if test "x$gcc_cv_tool_dirs" = x; then
- gcc_cv_objdump=
- else
- for ac_prog in objdump
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_objdump+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $gcc_cv_objdump in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_objdump="$gcc_cv_objdump" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $gcc_cv_tool_dirs
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_objdump="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-gcc_cv_objdump=$ac_cv_path_gcc_cv_objdump
-
-if test -n "$gcc_cv_objdump"; then
- echo "$as_me:$LINENO: result: $gcc_cv_objdump" >&5
-echo "${ECHO_T}$gcc_cv_objdump" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$gcc_cv_objdump" && break
-done
-
- fi
-fi
-if test "x$gcc_cv_objdump" = x; then
- # If the loop above did not find a tool, then use whatever
- # one we can find in the users's path. We are looking for a
- # ${build} -> ${target} tool.
- if test "x$program_prefix" != xNONE; then
- default_tool_name=${program_prefix}objdump
- elif test x$build != x$host && test x$build != x$target; then
- default_tool_name=${target_noncanonical}-objdump
- else
- default_tool_name=`echo objdump | sed "${program_transform_name}"`
- fi
- for ac_prog in $default_tool_name
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_gcc_cv_objdump+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $gcc_cv_objdump in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_gcc_cv_objdump="$gcc_cv_objdump" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_gcc_cv_objdump="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- ;;
-esac
-fi
-gcc_cv_objdump=$ac_cv_path_gcc_cv_objdump
-
-if test -n "$gcc_cv_objdump"; then
- echo "$as_me:$LINENO: result: $gcc_cv_objdump" >&5
-echo "${ECHO_T}$gcc_cv_objdump" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$gcc_cv_objdump" && break
-done
-test -n "$gcc_cv_objdump" || gcc_cv_objdump="$gcc_cv_tool_prefix/bin/$default_tool_name$build_exeext"
-
-fi
-test "$silent" != yes && exec 6>&1
-
-ORIGINAL_OBJDUMP_FOR_TARGET="$gcc_cv_objdump"
-
-echo "$as_me:$LINENO: checking what objdump to use" >&5
-echo $ECHO_N "checking what objdump to use... $ECHO_C" >&6
-case $in_tree_objdump in
- yes) echo "$as_me:$LINENO: result: \"newly built objdump\"" >&5
-echo "${ECHO_T}\"newly built objdump\"" >&6 ;;
- no) echo "$as_me:$LINENO: result: $gcc_cv_objdump" >&5
-echo "${ECHO_T}$gcc_cv_objdump" >&6 ;;
-esac
# Figure out what assembler alignment features are present.
echo "$as_me:$LINENO: checking assembler for .balign and .p2align" >&5
s,@gcc_cv_nm@,$gcc_cv_nm,;t t
s,@ORIGINAL_NM_FOR_TARGET@,$ORIGINAL_NM_FOR_TARGET,;t t
s,@gcc_cv_objdump@,$gcc_cv_objdump,;t t
-s,@ORIGINAL_OBJDUMP_FOR_TARGET@,$ORIGINAL_OBJDUMP_FOR_TARGET,;t t
s,@libgcc_visibility@,$libgcc_visibility,;t t
s,@GGC@,$GGC,;t t
s,@zlibdir@,$zlibdir,;t t
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
fi;;
esac
done` || { (exit 1); exit 1; }
+
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
sed "$ac_vpsub
OSDN Git Service
