OSDN Git Service

2009-05-28 Tom Tromey <tromey@redhat.com>
authortromey <tromey@138bc75d-0d04-0410-961f-82ee72b054a4>
Thu, 28 May 2009 17:14:18 +0000 (17:14 +0000)
committertromey <tromey@138bc75d-0d04-0410-961f-82ee72b054a4>
Thu, 28 May 2009 17:14:18 +0000 (17:14 +0000)
    Phil Muldoon  <pmuldoon@redhat.com>
    Jonathan Wakely  <jwakely.gcc@gmail.com>

* python/Makefile.in, , python/libstdcxx/__init__.py,
python/libstdcxx/v6/__init__.py, python/libstdcxx/v6/printers.py,
python/hook.in, python/Makefile.am: New files.
* configure, Makefile.in: Rebuild.
* acinclude.m4 (glibcxx_SUBDIRS): Add python.
* Makefile.am (SUBDIRS): Add python.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@147958 138bc75d-0d04-0410-961f-82ee72b054a4

libstdc++-v3/ChangeLog
libstdc++-v3/Makefile.am
libstdc++-v3/Makefile.in
libstdc++-v3/acinclude.m4
libstdc++-v3/configure
libstdc++-v3/python/Makefile.am [new file with mode: 0644]
libstdc++-v3/python/Makefile.in [new file with mode: 0644]
libstdc++-v3/python/hook.in [new file with mode: 0644]
libstdc++-v3/python/libstdcxx/__init__.py [new file with mode: 0644]
libstdc++-v3/python/libstdcxx/v6/__init__.py [new file with mode: 0644]
libstdc++-v3/python/libstdcxx/v6/printers.py [new file with mode: 0644]

index fc1fb0d..1a237c2 100644 (file)
@@ -1,3 +1,14 @@
+2009-05-28  Tom Tromey  <tromey@redhat.com>
+           Phil Muldoon  <pmuldoon@redhat.com>
+           Jonathan Wakely  <jwakely.gcc@gmail.com>
+
+       * python/Makefile.in, , python/libstdcxx/__init__.py,
+       python/libstdcxx/v6/__init__.py, python/libstdcxx/v6/printers.py,
+       python/hook.in, python/Makefile.am: New files.
+       * configure, Makefile.in: Rebuild.
+       * acinclude.m4 (glibcxx_SUBDIRS): Add python.
+       * Makefile.am (SUBDIRS): Add python.
+
 2009-05-28  Benjamin Kosnik  <bkoz@redhat.com>
 
        * testsuite/util/testsuite_allocator.h (check_new, check_delete): Move
index 7c8f9c2..1f8d315 100644 (file)
@@ -27,7 +27,8 @@ if GLIBCXX_HOSTED
   hosted_source = doc src po testsuite
 endif
 ## Keep this list sync'd with acinclude.m4:GLIBCXX_CONFIGURE.
-SUBDIRS = include libsupc++ $(hosted_source)
+## Note that python must come after src.
+SUBDIRS = include libsupc++ $(hosted_source) python
 
 ACLOCAL_AMFLAGS = -I . -I .. -I ../config
 
index 7d5afd9..c51a637 100644 (file)
@@ -87,7 +87,7 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
        uninstall-recursive
 ETAGS = etags
 CTAGS = ctags
-DIST_SUBDIRS = include libsupc++ doc src po testsuite
+DIST_SUBDIRS = include libsupc++ doc src po testsuite python
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -321,7 +321,7 @@ WARN_CXXFLAGS = \
 # -I/-D flags to pass when compiling.
 AM_CPPFLAGS = $(GLIBCXX_INCLUDES)
 @GLIBCXX_HOSTED_TRUE@hosted_source = doc src po testsuite
-SUBDIRS = include libsupc++ $(hosted_source)
+SUBDIRS = include libsupc++ $(hosted_source) python
 ACLOCAL_AMFLAGS = -I . -I .. -I ../config
 
 # Multilib support.
index 186916c..d7895f5 100644 (file)
@@ -49,7 +49,7 @@ AC_DEFUN([GLIBCXX_CONFIGURE], [
   # Keep these sync'd with the list in Makefile.am.  The first provides an
   # expandable list at autoconf time; the second provides an expandable list
   # (i.e., shell variable) at configure time.
-  m4_define([glibcxx_SUBDIRS],[include libsupc++ src doc po testsuite])
+  m4_define([glibcxx_SUBDIRS],[include libsupc++ python src doc po testsuite])
   SUBDIRS='glibcxx_SUBDIRS'
 
   # These need to be absolute paths, yet at the same time need to
index 50d8670..542e38a 100755 (executable)
@@ -2453,7 +2453,7 @@ echo "${ECHO_T}$ac_cv_prog_egrep" >&6
   # expandable list at autoconf time; the second provides an expandable list
   # (i.e., shell variable) at configure time.
 
-  SUBDIRS='include libsupc++ src doc po testsuite'
+  SUBDIRS='include libsupc++ python src doc po testsuite'
 
   # These need to be absolute paths, yet at the same time need to
   # canonicalize only relative paths, because then amd will not unmount
@@ -118371,7 +118371,7 @@ else
 fi
 
 
-                                                                      ac_config_files="$ac_config_files Makefile include/Makefile libsupc++/Makefile src/Makefile doc/Makefile po/Makefile testsuite/Makefile"
+                                                                                ac_config_files="$ac_config_files Makefile include/Makefile libsupc++/Makefile python/Makefile src/Makefile doc/Makefile po/Makefile testsuite/Makefile"
 
           ac_config_files="$ac_config_files scripts/testsuite_flags"
 
   "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
   "include/Makefile" ) CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
   "libsupc++/Makefile" ) CONFIG_FILES="$CONFIG_FILES libsupc++/Makefile" ;;
+  "python/Makefile" ) CONFIG_FILES="$CONFIG_FILES python/Makefile" ;;
   "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
   "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
   "po/Makefile" ) CONFIG_FILES="$CONFIG_FILES po/Makefile" ;;
diff --git a/libstdc++-v3/python/Makefile.am b/libstdc++-v3/python/Makefile.am
new file mode 100644 (file)
index 0000000..bcc8afe
--- /dev/null
@@ -0,0 +1,43 @@
+## Makefile for the python subdirectory of the GNU C++ Standard library.
+##
+## Copyright (C) 2009 Free Software Foundation, Inc.
+##
+## This file is part of the libstdc++ version 3 distribution.
+## Process this file with automake to produce Makefile.in.
+
+## This file is part of the GNU ISO C++ Library.  This library is free
+## software; you can redistribute it and/or modify it under the
+## terms of the GNU General Public License as published by the
+## Free Software Foundation; either version 2, or (at your option)
+## any later version.
+
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+
+## You should have received a copy of the GNU General Public License along
+## with this library; see the file COPYING.  If not, write to the Free
+## Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+## USA.
+
+include $(top_srcdir)/fragment.am
+
+## Where to install the module code.
+pythondir = $(pkgdatadir)/python
+
+all-local: gdb.py
+
+nobase_python_DATA = \
+    libstdcxx/v6/printers.py \
+    libstdcxx/v6/__init__.py \
+    libstdcxx/__init__.py
+
+gdb.py: hook.in Makefile
+       sed -e 's,@dir@,$(pythondir),' < $(srcdir)/hook.in > $@
+
+install-data-local: gdb.py
+       @$(mkdir_p) $(DESTDIR)$(toolexeclibdir)
+       @libname=`cd $(toolexeclibdir) && ls -r libstdc++* | fgrep -v gdb.py | sed 1q`; \
+       echo " $(INSTALL_DATA) gdb.py $(DESTDIR)$(toolexeclibdir)/$$libname-gdb.py"; \
+       $(INSTALL_DATA) gdb.py $(DESTDIR)$(toolexeclibdir)/$$libname-gdb.py
diff --git a/libstdc++-v3/python/Makefile.in b/libstdc++-v3/python/Makefile.in
new file mode 100644 (file)
index 0000000..879f040
--- /dev/null
@@ -0,0 +1,504 @@
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+       $(top_srcdir)/fragment.am
+subdir = python
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../config/enable.m4 \
+       $(top_srcdir)/../config/futex.m4 \
+       $(top_srcdir)/../config/iconv.m4 \
+       $(top_srcdir)/../config/lead-dot.m4 \
+       $(top_srcdir)/../config/lib-ld.m4 \
+       $(top_srcdir)/../config/lib-link.m4 \
+       $(top_srcdir)/../config/lib-prefix.m4 \
+       $(top_srcdir)/../config/multi.m4 \
+       $(top_srcdir)/../config/no-executables.m4 \
+       $(top_srcdir)/../config/override.m4 \
+       $(top_srcdir)/../config/proginstall.m4 \
+       $(top_srcdir)/../config/stdint.m4 \
+       $(top_srcdir)/../config/unwind_ipinfo.m4 \
+       $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
+       $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
+       $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \
+       $(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
+       $(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+       $(ACLOCAL_M4)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+depcomp =
+am__depfiles_maybe =
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(pythondir)"
+nobase_pythonDATA_INSTALL = $(install_sh_DATA)
+DATA = $(nobase_python_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@
+ACLOCAL = @ACLOCAL@
+ALLOCATOR_H = @ALLOCATOR_H@
+ALLOCATOR_NAME = @ALLOCATOR_NAME@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@
+ATOMIC_FLAGS = @ATOMIC_FLAGS@
+ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BASIC_FILE_CC = @BASIC_FILE_CC@
+BASIC_FILE_H = @BASIC_FILE_H@
+CC = @CC@
+CCODECVT_CC = @CCODECVT_CC@
+CCOLLATE_CC = @CCOLLATE_CC@
+CCTYPE_CC = @CCTYPE_CC@
+CFLAGS = @CFLAGS@
+CLOCALE_CC = @CLOCALE_CC@
+CLOCALE_H = @CLOCALE_H@
+CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@
+CMESSAGES_CC = @CMESSAGES_CC@
+CMESSAGES_H = @CMESSAGES_H@
+CMONEY_CC = @CMONEY_CC@
+CNUMERIC_CC = @CNUMERIC_CC@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@
+CSTDIO_H = @CSTDIO_H@
+CTIME_CC = @CTIME_CC@
+CTIME_H = @CTIME_H@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+C_INCLUDE_DIR = @C_INCLUDE_DIR@
+DEBUG_FLAGS = @DEBUG_FLAGS@
+DEFS = @DEFS@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ENABLE_PARALLEL_FALSE = @ENABLE_PARALLEL_FALSE@
+ENABLE_PARALLEL_TRUE = @ENABLE_PARALLEL_TRUE@
+ENABLE_SYMVERS_DARWIN_FALSE = @ENABLE_SYMVERS_DARWIN_FALSE@
+ENABLE_SYMVERS_DARWIN_TRUE = @ENABLE_SYMVERS_DARWIN_TRUE@
+ENABLE_SYMVERS_FALSE = @ENABLE_SYMVERS_FALSE@
+ENABLE_SYMVERS_GNU_FALSE = @ENABLE_SYMVERS_GNU_FALSE@
+ENABLE_SYMVERS_GNU_NAMESPACE_FALSE = @ENABLE_SYMVERS_GNU_NAMESPACE_FALSE@
+ENABLE_SYMVERS_GNU_NAMESPACE_TRUE = @ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@
+ENABLE_SYMVERS_GNU_TRUE = @ENABLE_SYMVERS_GNU_TRUE@
+ENABLE_SYMVERS_TRUE = @ENABLE_SYMVERS_TRUE@
+ENABLE_VISIBILITY_FALSE = @ENABLE_VISIBILITY_FALSE@
+ENABLE_VISIBILITY_TRUE = @ENABLE_VISIBILITY_TRUE@
+ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@
+EXEEXT = @EXEEXT@
+EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
+FGREP = @FGREP@
+GLIBCXX_BUILD_DEBUG_FALSE = @GLIBCXX_BUILD_DEBUG_FALSE@
+GLIBCXX_BUILD_DEBUG_TRUE = @GLIBCXX_BUILD_DEBUG_TRUE@
+GLIBCXX_BUILD_PCH_FALSE = @GLIBCXX_BUILD_PCH_FALSE@
+GLIBCXX_BUILD_PCH_TRUE = @GLIBCXX_BUILD_PCH_TRUE@
+GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE = @GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE@
+GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE = @GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE@
+GLIBCXX_C_HEADERS_C_FALSE = @GLIBCXX_C_HEADERS_C_FALSE@
+GLIBCXX_C_HEADERS_C_GLOBAL_FALSE = @GLIBCXX_C_HEADERS_C_GLOBAL_FALSE@
+GLIBCXX_C_HEADERS_C_GLOBAL_TRUE = @GLIBCXX_C_HEADERS_C_GLOBAL_TRUE@
+GLIBCXX_C_HEADERS_C_STD_FALSE = @GLIBCXX_C_HEADERS_C_STD_FALSE@
+GLIBCXX_C_HEADERS_C_STD_TRUE = @GLIBCXX_C_HEADERS_C_STD_TRUE@
+GLIBCXX_C_HEADERS_C_TRUE = @GLIBCXX_C_HEADERS_C_TRUE@
+GLIBCXX_C_HEADERS_EXTRA_FALSE = @GLIBCXX_C_HEADERS_EXTRA_FALSE@
+GLIBCXX_C_HEADERS_EXTRA_TRUE = @GLIBCXX_C_HEADERS_EXTRA_TRUE@
+GLIBCXX_HOSTED_FALSE = @GLIBCXX_HOSTED_FALSE@
+GLIBCXX_HOSTED_TRUE = @GLIBCXX_HOSTED_TRUE@
+GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@
+GLIBCXX_LDBL_COMPAT_FALSE = @GLIBCXX_LDBL_COMPAT_FALSE@
+GLIBCXX_LDBL_COMPAT_TRUE = @GLIBCXX_LDBL_COMPAT_TRUE@
+GLIBCXX_LIBS = @GLIBCXX_LIBS@
+GREP = @GREP@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
+OPT_LDFLAGS = @OPT_LDFLAGS@
+OS_INC_SRCDIR = @OS_INC_SRCDIR@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SECTION_FLAGS = @SECTION_FLAGS@
+SECTION_LDFLAGS = @SECTION_LDFLAGS@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+SYMVER_FILE = @SYMVER_FILE@
+TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+WARN_FLAGS = @WARN_FLAGS@
+WERROR = @WERROR@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_AS = @ac_ct_AS@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DSYMUTIL = @ac_ct_DSYMUTIL@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_LIPO = @ac_ct_LIPO@
+ac_ct_NMEDIT = @ac_ct_NMEDIT@
+ac_ct_OBJDUMP = @ac_ct_OBJDUMP@
+ac_ct_OTOOL = @ac_ct_OTOOL@
+ac_ct_OTOOL64 = @ac_ct_OTOOL64@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
+baseline_dir = @baseline_dir@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+check_msgfmt = @check_msgfmt@
+datadir = @datadir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+glibcxx_MOFILES = @glibcxx_MOFILES@
+glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@
+glibcxx_POFILES = @glibcxx_POFILES@
+glibcxx_builddir = @glibcxx_builddir@
+glibcxx_localedir = @glibcxx_localedir@
+glibcxx_prefixdir = @glibcxx_prefixdir@
+glibcxx_srcdir = @glibcxx_srcdir@
+glibcxx_thread_h = @glibcxx_thread_h@
+glibcxx_toolexecdir = @glibcxx_toolexecdir@
+glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
+gxx_include_dir = @gxx_include_dir@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libtool_VERSION = @libtool_VERSION@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+multi_basedir = @multi_basedir@
+oldincludedir = @oldincludedir@
+port_specific_symbol_files = @port_specific_symbol_files@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+toplevel_srcdir = @toplevel_srcdir@
+
+# May be used by various substitution variables.
+gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
+MAINT_CHARSET = latin1
+mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
+PWD_COMMAND = $${PWDCMD-pwd}
+STAMP = echo timestamp >
+toolexecdir = $(glibcxx_toolexecdir)
+toolexeclibdir = $(glibcxx_toolexeclibdir)
+
+# These bits are all figured out from configure.  Look in acinclude.m4
+# or configure.ac to see how they are set.  See GLIBCXX_EXPORT_FLAGS.
+CONFIG_CXXFLAGS = \
+       $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS)
+
+WARN_CXXFLAGS = \
+       $(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once
+
+
+# -I/-D flags to pass when compiling.
+AM_CPPFLAGS = $(GLIBCXX_INCLUDES)
+pythondir = $(pkgdatadir)/python
+nobase_python_DATA = \
+    libstdcxx/v6/printers.py \
+    libstdcxx/v6/__init__.py \
+    libstdcxx/__init__.py
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)
+       @for dep in $?; do \
+         case '$(am__configure_deps)' in \
+           *$$dep*) \
+             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+               && exit 0; \
+             exit 1;; \
+         esac; \
+       done; \
+       echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  --ignore-deps python/Makefile'; \
+       cd $(top_srcdir) && \
+         $(AUTOMAKE) --foreign  --ignore-deps python/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+       @case '$?' in \
+         *config.status*) \
+           cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+         *) \
+           echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+           cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+       esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+       -rm -f *.lo
+
+clean-libtool:
+       -rm -rf .libs _libs
+
+distclean-libtool:
+       -rm -f libtool
+uninstall-info-am:
+install-nobase_pythonDATA: $(nobase_python_DATA)
+       @$(NORMAL_INSTALL)
+       test -z "$(pythondir)" || $(mkdir_p) "$(DESTDIR)$(pythondir)"
+       @$(am__vpath_adj_setup) \
+       list='$(nobase_python_DATA)'; for p in $$list; do \
+         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+         $(am__vpath_adj) \
+         echo " $(nobase_pythonDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pythondir)/$$f'"; \
+         $(nobase_pythonDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pythondir)/$$f"; \
+       done
+
+uninstall-nobase_pythonDATA:
+       @$(NORMAL_UNINSTALL)
+       @$(am__vpath_adj_setup) \
+       list='$(nobase_python_DATA)'; for p in $$list; do \
+         $(am__vpath_adj) \
+         echo " rm -f '$(DESTDIR)$(pythondir)/$$f'"; \
+         rm -f "$(DESTDIR)$(pythondir)/$$f"; \
+       done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+       $(mkdir_p) $(distdir)/..
+       @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+       topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+       list='$(DISTFILES)'; for file in $$list; do \
+         case $$file in \
+           $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+           $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+         esac; \
+         if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+         dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+         if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+           dir="/$$dir"; \
+           $(mkdir_p) "$(distdir)$$dir"; \
+         else \
+           dir=''; \
+         fi; \
+         if test -d $$d/$$file; then \
+           if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+             cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+           fi; \
+           cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+         else \
+           test -f $(distdir)/$$file \
+           || cp -p $$d/$$file $(distdir)/$$file \
+           || exit 1; \
+         fi; \
+       done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA) all-local
+installdirs:
+       for dir in "$(DESTDIR)$(pythondir)"; do \
+         test -z "$$dir" || $(mkdir_p) "$$dir"; \
+       done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+       @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+       $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+         install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+         `test -z '$(STRIP)' || \
+           echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+       @echo "This command is intended for maintainers to use"
+       @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+       -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-nobase_pythonDATA
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+       -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-nobase_pythonDATA
+
+.PHONY: all all-am all-local check check-am clean clean-generic \
+       clean-libtool distclean distclean-generic distclean-libtool \
+       distdir dvi dvi-am html html-am info info-am install \
+       install-am install-data install-data-am install-data-local \
+       install-exec install-exec-am install-info install-info-am \
+       install-man install-nobase_pythonDATA install-strip \
+       installcheck installcheck-am installdirs maintainer-clean \
+       maintainer-clean-generic mostlyclean mostlyclean-generic \
+       mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+       uninstall-info-am uninstall-nobase_pythonDATA
+
+
+all-local: gdb.py
+
+gdb.py: hook.in Makefile
+       sed -e 's,@dir@,$(pythondir),' < $(srcdir)/hook.in > $@
+
+install-data-local: gdb.py
+       @$(mkdir_p) $(DESTDIR)$(toolexeclibdir)
+       @libname=`cd $(toolexeclibdir) && ls -r libstdc++* | fgrep -v gdb.py | sed 1q`; \
+       echo " $(INSTALL_DATA) gdb.py $(DESTDIR)$(toolexeclibdir)/$$libname-gdb.py"; \
+       $(INSTALL_DATA) gdb.py $(DESTDIR)$(toolexeclibdir)/$$libname-gdb.py
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libstdc++-v3/python/hook.in b/libstdc++-v3/python/hook.in
new file mode 100644 (file)
index 0000000..fe7c072
--- /dev/null
@@ -0,0 +1,27 @@
+# -*- python -*-
+# Copyright (C) 2009 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+import sys
+import gdb
+
+# Update module path.
+dir = '@dir@'
+if not dir in sys.path:
+    sys.path.insert(0, dir)
+
+# Load the pretty-printers.
+from libstdcxx.v6.printers import register_libstdcxx_printers
+register_libstdcxx_printers (gdb.current_objfile ())
diff --git a/libstdc++-v3/python/libstdcxx/__init__.py b/libstdc++-v3/python/libstdcxx/__init__.py
new file mode 100644 (file)
index 0000000..8b13789
--- /dev/null
@@ -0,0 +1 @@
+
diff --git a/libstdc++-v3/python/libstdcxx/v6/__init__.py b/libstdc++-v3/python/libstdcxx/v6/__init__.py
new file mode 100644 (file)
index 0000000..8b13789
--- /dev/null
@@ -0,0 +1 @@
+
diff --git a/libstdc++-v3/python/libstdcxx/v6/printers.py b/libstdc++-v3/python/libstdcxx/v6/printers.py
new file mode 100644 (file)
index 0000000..7b22e8a
--- /dev/null
@@ -0,0 +1,642 @@
+# Pretty-printers for libstc++.
+
+# Copyright (C) 2008, 2009 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+import gdb
+import itertools
+import re
+
+class StdPointerPrinter:
+    "Print a smart pointer of some kind"
+
+    def __init__ (self, typename, val):
+        self.typename = typename
+        self.val = val
+
+    def to_string (self):
+        if self.val['_M_refcount']['_M_pi'] == 0:
+            return '%s (empty) %s' % (self.typename, self.val['_M_ptr'])
+        return '%s (count %d) %s' % (self.typename,
+                                     self.val['_M_refcount']['_M_pi']['_M_use_count'],
+                                     self.val['_M_ptr'])
+
+class UniquePointerPrinter:
+    "Print a unique_ptr"
+
+    def __init__ (self, val):
+        self.val = val
+
+    def to_string (self):
+        return self.val['_M_t']
+
+class StdListPrinter:
+    "Print a std::list"
+
+    class _iterator:
+        def __init__(self, nodetype, head):
+            self.nodetype = nodetype
+            self.base = head['_M_next']
+            self.head = head.address
+            self.count = 0
+
+        def __iter__(self):
+            return self
+
+        def next(self):
+            if self.base == self.head:
+                raise StopIteration
+            elt = self.base.cast(self.nodetype).dereference()
+            self.base = elt['_M_next']
+            count = self.count
+            self.count = self.count + 1
+            return ('[%d]' % count, elt['_M_data'])
+
+    def __init__(self, val):
+        self.val = val
+
+    def children(self):
+        itype = self.val.type.template_argument(0)
+        nodetype = gdb.lookup_type('std::_List_node<%s>' % itype).pointer()
+        return self._iterator(nodetype, self.val['_M_impl']['_M_node'])
+
+    def to_string(self):
+        if self.val['_M_impl']['_M_node'].address == self.val['_M_impl']['_M_node']['_M_next']:
+            return 'empty std::list'
+        return 'std::list'
+
+class StdListIteratorPrinter:
+    "Print std::list::iterator"
+
+    def __init__(self, val):
+        self.val = val
+
+    def to_string(self):
+        itype = self.val.type.template_argument(0)
+        nodetype = gdb.lookup_type('std::_List_node<%s>' % itype).pointer()
+        return self.val['_M_node'].cast(nodetype).dereference()['_M_data']
+
+class StdSlistPrinter:
+    "Print a __gnu_cxx::slist"
+
+    class _iterator:
+        def __init__(self, nodetype, head):
+            self.nodetype = nodetype
+            self.base = head['_M_head']['_M_next']
+            self.count = 0
+
+        def __iter__(self):
+            return self
+
+        def next(self):
+            if self.base == 0:
+                raise StopIteration
+            elt = self.base.cast(self.nodetype).dereference()
+            self.base = elt['_M_next']
+            count = self.count
+            self.count = self.count + 1
+            return ('[%d]' % count, elt['_M_data'])
+
+    def __init__(self, val):
+        self.val = val
+
+    def children(self):
+        itype = self.val.type.template_argument(0)
+        nodetype = gdb.lookup_type('__gnu_cxx::_Slist_node<%s>' % itype).pointer()
+        return self._iterator(nodetype, self.val)
+
+    def to_string(self):
+        if self.val['_M_head']['_M_next'] == 0:
+            return 'empty __gnu_cxx::slist'
+        return '__gnu_cxx::slist'
+
+class StdSlistIteratorPrinter:
+    "Print __gnu_cxx::slist::iterator"
+
+    def __init__(self, val):
+        self.val = val
+
+    def to_string(self):
+        itype = self.val.type.template_argument(0)
+        nodetype = gdb.lookup_type('__gnu_cxx::_Slist_node<%s>' % itype).pointer()
+        return self.val['_M_node'].cast(nodetype).dereference()['_M_data']
+
+class StdVectorPrinter:
+    "Print a std::vector"
+
+    class _iterator:
+        def __init__ (self, start, finish):
+            self.item = start
+            self.finish = finish
+            self.count = 0
+
+        def __iter__(self):
+            return self
+
+        def next(self):
+            if self.item == self.finish:
+                raise StopIteration
+            count = self.count
+            self.count = self.count + 1
+            elt = self.item.dereference()
+            self.item = self.item + 1
+            return ('[%d]' % count, elt)
+
+    def __init__(self, val):
+        self.val = val
+
+    def children(self):
+        return self._iterator(self.val['_M_impl']['_M_start'],
+                              self.val['_M_impl']['_M_finish'])
+
+    def to_string(self):
+        start = self.val['_M_impl']['_M_start']
+        finish = self.val['_M_impl']['_M_finish']
+        end = self.val['_M_impl']['_M_end_of_storage']
+        return ('std::vector of length %d, capacity %d'
+                % (int (finish - start), int (end - start)))
+
+    def display_hint(self):
+        return 'array'
+
+class StdVectorIteratorPrinter:
+    "Print std::vector::iterator"
+
+    def __init__(self, val):
+        self.val = val
+
+    def to_string(self):
+        return self.val['_M_current'].dereference()
+
+class StdStackOrQueuePrinter:
+    "Print a std::stack or std::queue"
+
+    def __init__ (self, typename, val):
+        self.typename = typename
+        self.visualizer = gdb.default_visualizer(val['c'])
+
+    def children (self):
+        return self.visualizer.children()
+
+    def to_string (self):
+        return '%s wrapping: %s' % (self.typename,
+                                    self.visualizer.to_string())
+
+    def display_hint (self):
+        if hasattr (self.visualizer, 'display_hint'):
+            return self.visualizer.display_hint ()
+        return None
+
+class RbtreeIterator:
+    def __init__(self, rbtree):
+        self.size = rbtree['_M_t']['_M_impl']['_M_node_count']
+        self.node = rbtree['_M_t']['_M_impl']['_M_header']['_M_left']
+        self.count = 0
+
+    def __iter__(self):
+        return self
+
+    def __len__(self):
+        return int (self.size)
+
+    def next(self):
+        if self.count == self.size:
+            raise StopIteration
+        result = self.node
+        self.count = self.count + 1
+        if self.count < self.size:
+            # Compute the next node.
+            node = self.node
+            if node.dereference()['_M_right']:
+                node = node.dereference()['_M_right']
+                while node.dereference()['_M_left']:
+                    node = node.dereference()['_M_left']
+            else:
+                parent = node.dereference()['_M_parent']
+                while node == parent.dereference()['_M_right']:
+                    node = parent
+                    parent = parent.dereference()['_M_parent']
+                if node.dereference()['_M_right'] != parent:
+                    node = parent
+            self.node = node
+        return result
+
+# This is a pretty printer for std::_Rb_tree_iterator (which is
+# std::map::iterator), and has nothing to do with the RbtreeIterator
+# class above.
+class StdRbtreeIteratorPrinter:
+    "Print std::map::iterator"
+
+    def __init__ (self, val):
+        self.val = val
+
+    def to_string (self):
+        valuetype = self.val.type.template_argument(0)
+        nodetype = gdb.lookup_type('std::_Rb_tree_node < %s >' % valuetype)
+        nodetype = nodetype.pointer()
+        return self.val.cast(nodetype).dereference()['_M_value_field']
+
+
+class StdMapPrinter:
+    "Print a std::map or std::multimap"
+
+    # Turn an RbtreeIterator into a pretty-print iterator.
+    class _iter:
+        def __init__(self, rbiter, type):
+            self.rbiter = rbiter
+            self.count = 0
+            self.type = type
+
+        def __iter__(self):
+            return self
+
+        def next(self):
+            if self.count % 2 == 0:
+                n = self.rbiter.next()
+                n = n.cast(self.type).dereference()['_M_value_field']
+                self.pair = n
+                item = n['first']
+            else:
+                item = self.pair['second']
+            result = ('[%d]' % self.count, item)
+            self.count = self.count + 1
+            return result
+
+    def __init__ (self, typename, val):
+        self.typename = typename
+        self.val = val
+        self.iter = RbtreeIterator (val)
+
+    def to_string (self):
+        return '%s with %d elements' % (self.typename, len (self.iter))
+
+    def children (self):
+        keytype = self.val.type.template_argument(0).const()
+        valuetype = self.val.type.template_argument(1)
+        nodetype = gdb.lookup_type('std::_Rb_tree_node< std::pair< %s, %s > >' % (keytype, valuetype))
+        nodetype = nodetype.pointer()
+        return self._iter (self.iter, nodetype)
+
+    def display_hint (self):
+        return 'map'
+
+class StdSetPrinter:
+    "Print a std::set or std::multiset"
+
+    # Turn an RbtreeIterator into a pretty-print iterator.
+    class _iter:
+        def __init__(self, rbiter, type):
+            self.rbiter = rbiter
+            self.count = 0
+            self.type = type
+
+        def __iter__(self):
+            return self
+
+        def next(self):
+            item = self.rbiter.next()
+            item = item.cast(self.type).dereference()['_M_value_field']
+            # FIXME: this is weird ... what to do?
+            # Maybe a 'set' display hint?
+            result = ('[%d]' % self.count, item)
+            self.count = self.count + 1
+            return result
+
+    def __init__ (self, typename, val):
+        self.typename = typename
+        self.val = val
+        self.iter = RbtreeIterator (val)
+
+    def to_string (self):
+        return '%s with %d elements' % (self.typename, len (self.iter))
+
+    def children (self):
+        keytype = self.val.type.template_argument(0)
+        nodetype = gdb.lookup_type('std::_Rb_tree_node< %s >' % keytype).pointer()
+        return self._iter (self.iter, nodetype)
+
+class StdBitsetPrinter:
+    "Print a std::bitset"
+
+    def __init__(self, val):
+        self.val = val
+
+    def to_string (self):
+        # If template_argument handled values, we could print the
+        # size.  Or we could use a regexp on the type.
+        return 'std::bitset'
+
+    def children (self):
+        words = self.val['_M_w']
+        wtype = words.type
+
+        # The _M_w member can be either an unsigned long, or an
+        # array.  This depends on the template specialization used.
+        # If it is a single long, convert to a single element list.
+        if wtype.code == gdb.TYPE_CODE_ARRAY:
+            tsize = wtype.target ().sizeof
+        else:
+            words = [words]
+            tsize = wtype.sizeof 
+
+        nwords = wtype.sizeof / tsize
+        result = []
+        byte = 0
+        while byte < nwords:
+            w = words[byte]
+            bit = 0
+            while w != 0:
+                if (w & 1) != 0:
+                    # Another spot where we could use 'set'?
+                    result.append(('[%d]' % (byte * tsize * 8 + bit), 1))
+                bit = bit + 1
+                w = w >> 1
+            byte = byte + 1
+        return result
+
+class StdDequePrinter:
+    "Print a std::deque"
+
+    class _iter:
+        def __init__(self, node, start, end, last, buffer_size):
+            self.node = node
+            self.p = start
+            self.end = end
+            self.last = last
+            self.buffer_size = buffer_size
+            self.count = 0
+
+        def __iter__(self):
+            return self
+
+        def next(self):
+            if self.p == self.last:
+                raise StopIteration
+
+            result = ('[%d]' % self.count, self.p.dereference())
+            self.count = self.count + 1
+
+            # Advance the 'cur' pointer.
+            self.p = self.p + 1
+            if self.p == self.end:
+                # If we got to the end of this bucket, move to the
+                # next bucket.
+                self.node = self.node + 1
+                self.p = self.node[0]
+                self.end = self.p + self.buffer_size
+
+            return result
+
+    def __init__(self, val):
+        self.val = val
+        self.elttype = val.type.template_argument(0)
+        size = self.elttype.sizeof
+        if size < 512:
+            self.buffer_size = int (512 / size)
+        else:
+            self.buffer_size = 1
+
+    def to_string(self):
+        start = self.val['_M_impl']['_M_start']
+        end = self.val['_M_impl']['_M_finish']
+
+        delta_n = end['_M_node'] - start['_M_node'] - 1
+        delta_s = start['_M_last'] - start['_M_cur']
+        delta_e = end['_M_cur'] - end['_M_first']
+
+        size = self.buffer_size * delta_n + delta_s + delta_e
+
+        return 'std::deque with %d elements' % long (size)
+
+    def children(self):
+        start = self.val['_M_impl']['_M_start']
+        end = self.val['_M_impl']['_M_finish']
+        return self._iter(start['_M_node'], start['_M_cur'], start['_M_last'],
+                          end['_M_cur'], self.buffer_size)
+
+    def display_hint (self):
+        return 'array'
+
+class StdDequeIteratorPrinter:
+    "Print std::deque::iterator"
+
+    def __init__(self, val):
+        self.val = val
+
+    def to_string(self):
+        return self.val['_M_cur'].dereference()
+
+class StdStringPrinter:
+    "Print a std::basic_string of some kind"
+
+    def __init__(self, encoding, val):
+        self.encoding = encoding
+        self.val = val
+
+    def to_string(self):
+        # Look up the target encoding as late as possible.
+        encoding = self.encoding
+        if encoding == 0:
+            encoding = gdb.parameter('target-charset')
+        elif encoding == 1:
+            encoding = gdb.parameter('target-wide-charset')
+        elif isinstance(encoding, WideEncoding):
+            encoding = encoding.value
+        return self.val['_M_dataplus']['_M_p'].string(encoding)
+
+    def display_hint (self):
+        return 'string'
+
+class Tr1HashtableIterator:
+    def __init__ (self, hash):
+        self.count = 0
+        self.n_buckets = hash['_M_element_count']
+        if self.n_buckets == 0:
+            self.node = False
+        else:
+            self.bucket = hash['_M_buckets']
+            self.node = self.bucket[0]
+            self.update ()
+
+    def __iter__ (self):
+        return self
+
+    def update (self):
+        # If we advanced off the end of the chain, move to the next
+        # bucket.
+        while self.node == 0:
+            self.bucket = self.bucket + 1
+            self.node = self.bucket[0]
+
+       # If we advanced off the end of the bucket array, then
+       # we're done.
+        if self.count == self.n_buckets:
+            self.node = False
+        else:
+            self.count = self.count + 1
+
+    def next (self):
+        if not self.node:
+            raise StopIteration
+        result = self.node.dereference()['_M_v']
+        self.node = self.node.dereference()['_M_next']
+        self.update ()
+        return result
+
+class Tr1UnorderedSetPrinter:
+    "Print a tr1::unordered_set"
+
+    def __init__ (self, typename, val):
+        self.typename = typename
+        self.val = val
+
+    def to_string (self):
+        return '%s with %d elements' % (self.typename, self.val['_M_element_count'])
+
+    @staticmethod
+    def format_count (i):
+        return '[%d]' % i
+
+    def children (self):
+        counter = itertools.imap (self.format_count, itertools.count())
+        return itertools.izip (counter, Tr1HashtableIterator (self.val))
+
+class Tr1UnorderedMapPrinter:
+    "Print a tr1::unordered_map"
+
+    def __init__ (self, typename, val):
+        self.typename = typename
+        self.val = val
+
+    def to_string (self):
+        return '%s with %d elements' % (self.typename, self.val['_M_element_count'])
+
+    @staticmethod
+    def flatten (list):
+        for elt in list:
+            for i in elt:
+                yield i
+
+    @staticmethod
+    def format_one (elt):
+        return (elt['first'], elt['second'])
+
+    @staticmethod
+    def format_count (i):
+        return '[%d]' % i
+
+    def children (self):
+        counter = itertools.imap (self.format_count, itertools.count())
+        # Map over the hash table and flatten the result.
+        data = self.flatten (itertools.imap (self.format_one, Tr1HashtableIterator (self.val)))
+        # Zip the two iterators together.
+        return itertools.izip (counter, data)
+
+    def display_hint (self):
+        return 'map'
+
+def register_libstdcxx_printers (obj):
+    "Register libstdc++ pretty-printers with objfile Obj."
+
+    if obj == None:
+        obj = gdb
+
+    obj.pretty_printers.append (lookup_function)
+
+def lookup_function (val):
+    "Look-up and return a pretty-printer that can print val."
+
+    # Get the type.
+    type = val.type;
+
+    # If it points to a reference, get the reference.
+    if type.code == gdb.TYPE_CODE_REF:
+        type = type.target ()
+
+    # Get the unqualified type, stripped of typedefs.
+    type = type.unqualified ().strip_typedefs ()
+
+    # Get the type name.    
+    typename = type.tag
+    if typename == None:
+        return None
+
+    # Iterate over local dictionary of types to determine
+    # if a printer is registered for that type.  Return an
+    # instantiation of the printer if found.
+    for function in pretty_printers_dict:
+        if function.search (typename):
+            return pretty_printers_dict[function] (val)
+        
+    # Cannot find a pretty printer.  Return None.
+    return None
+
+def build_libstdcxx_dictionary ():
+    # libstdc++ objects requiring pretty-printing.
+    # In order from:
+    # http://gcc.gnu.org/onlinedocs/libstdc++/latest-doxygen/a01847.html
+    pretty_printers_dict[re.compile('^std::basic_string<char,.*>$')] = lambda val: StdStringPrinter(0, val)
+    pretty_printers_dict[re.compile('^std::basic_string<wchar_t,.*>$')] = lambda val: StdStringPrinter(1, val)
+    pretty_printers_dict[re.compile('^std::basic_string<char16_t,.*>$')] = lambda val: StdStringPrinter('UTF-16', val)
+    pretty_printers_dict[re.compile('^std::basic_string<char32_t,.*>$')] = lambda val: StdStringPrinter('UTF-32', val)
+    pretty_printers_dict[re.compile('^std::bitset<.*>$')] = StdBitsetPrinter
+    pretty_printers_dict[re.compile('^std::deque<.*>$')] = StdDequePrinter
+    pretty_printers_dict[re.compile('^std::list<.*>$')] = StdListPrinter
+    pretty_printers_dict[re.compile('^std::map<.*>$')] = lambda val: StdMapPrinter("std::map", val)
+    pretty_printers_dict[re.compile('^std::multimap<.*>$')] = lambda val: StdMapPrinter("std::multimap", val)
+    pretty_printers_dict[re.compile('^std::multiset<.*>$')] = lambda val: StdSetPrinter("std::multiset", val)
+    pretty_printers_dict[re.compile('^std::priority_queue<.*>$')] = lambda val: StdStackOrQueuePrinter("std::priority_queue", val)
+    pretty_printers_dict[re.compile('^std::queue<.*>$')] = lambda val: StdStackOrQueuePrinter("std::queue", val)
+    pretty_printers_dict[re.compile('^std::set<.*>$')] = lambda val: StdSetPrinter("std::set", val)
+    pretty_printers_dict[re.compile('^std::stack<.*>$')] = lambda val: StdStackOrQueuePrinter("std::stack", val)
+    pretty_printers_dict[re.compile('^std::unique_ptr<.*>$')] = UniquePointerPrinter
+    pretty_printers_dict[re.compile('^std::vector<.*>$')] = StdVectorPrinter
+    # vector<bool>
+
+    # These are the TR1 and C++0x printers.
+    # For array - the default GDB pretty-printer seems reasonable.
+    pretty_printers_dict[re.compile('^std::shared_ptr<.*>$')] = lambda val: StdPointerPrinter ('std::shared_ptr', val)
+    pretty_printers_dict[re.compile('^std::weak_ptr<.*>$')] = lambda val: StdPointerPrinter ('std::weak_ptr', val)
+    pretty_printers_dict[re.compile('^std::unordered_map<.*>$')] = lambda val: Tr1UnorderedMapPrinter ('std::unordered_map', val)
+    pretty_printers_dict[re.compile('^std::unordered_set<.*>$')] = lambda val: Tr1UnorderedSetPrinter ('std::unordered_set', val)
+    pretty_printers_dict[re.compile('^std::unordered_multimap<.*>$')] = lambda val: Tr1UnorderedMapPrinter ('std::unordered_multimap', val)
+    pretty_printers_dict[re.compile('^std::unordered_multiset<.*>$')] = lambda val: Tr1UnorderedSetPrinter ('std::unordered_multiset', val)
+
+    pretty_printers_dict[re.compile('^std::tr1::shared_ptr<.*>$')] = lambda val: StdPointerPrinter ('std::tr1::shared_ptr', val)
+    pretty_printers_dict[re.compile('^std::tr1::weak_ptr<.*>$')] = lambda val: StdPointerPrinter ('std::tr1::weak_ptr', val)
+    pretty_printers_dict[re.compile('^std::tr1::unordered_map<.*>$')] = lambda val: Tr1UnorderedMapPrinter ('std::tr1::unordered_map', val)
+    pretty_printers_dict[re.compile('^std::tr1::unordered_set<.*>$')] = lambda val: Tr1UnorderedSetPrinter ('std::tr1::unordered_set', val)
+    pretty_printers_dict[re.compile('^std::tr1::unordered_multimap<.*>$')] = lambda val: Tr1UnorderedMapPrinter ('std::tr1::unordered_multimap', val)
+    pretty_printers_dict[re.compile('^std::tr1::unordered_multiset<.*>$')] = lambda val: Tr1UnorderedSetPrinter ('std::tr1::unordered_multiset', val)
+
+
+    # Extensions.
+    pretty_printers_dict[re.compile('^__gnu_cxx::slist<.*>$')] = StdSlistPrinter
+
+    if True:
+        # These shouldn't be necessary, if GDB "print *i" worked.
+        # But it often doesn't, so here they are.
+        pretty_printers_dict[re.compile('^std::_List_iterator<.*>$')] = lambda val: StdListIteratorPrinter(val)
+        pretty_printers_dict[re.compile('^std::_List_const_iterator<.*>$')] = lambda val: StdListIteratorPrinter(val)
+        pretty_printers_dict[re.compile('^std::_Rb_tree_iterator<.*>$')] = lambda val: StdRbtreeIteratorPrinter(val)
+        pretty_printers_dict[re.compile('^std::_Rb_tree_const_iterator<.*>$')] = lambda val: StdRbtreeIteratorPrinter(val)
+        pretty_printers_dict[re.compile('^std::_Deque_iterator<.*>$')] = lambda val: StdDequeIteratorPrinter(val)
+        pretty_printers_dict[re.compile('^std::_Deque_const_iterator<.*>$')] = lambda val: StdDequeIteratorPrinter(val)
+        pretty_printers_dict[re.compile('^__gnu_cxx::__normal_iterator<.*>$')] = lambda val: StdVectorIteratorPrinter(val)
+        pretty_printers_dict[re.compile('^__gnu_cxx::_Slist_iterator<.*>$')] = lambda val: StdSlistIteratorPrinter(val)
+
+pretty_printers_dict = {}
+
+build_libstdcxx_dictionary ()