* config/i386/sol2.h (PREFERRED_DEBUGGING_TYPE): Use stabs.

(ASM_SPEC): Moved from sol2dbg.h.  Added work-around for gas.
* config/i386/sol2dbg.h: Removed.
* config/i386/sol2gas.h: New file, to enable gas work-around.
* configure.in: Use i386/sol2gas.h on Solaris/x86 --with-gas.
Don't use sol2dbg.h.
* configure: Rebuilt.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@29534 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index f74b292..3dc3a37 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,13 @@
+Mon Sep 20 21:43:25 1999  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
+
+       * config/i386/sol2.h (PREFERRED_DEBUGGING_TYPE): Use stabs.
+       (ASM_SPEC): Moved from sol2dbg.h.  Added work-around for gas.
+       * config/i386/sol2dbg.h: Removed.
+       * config/i386/sol2gas.h: New file, to enable gas work-around.
+       * configure.in: Use i386/sol2gas.h on Solaris/x86 --with-gas.
+       Don't use sol2dbg.h.
+       * configure: Rebuilt.
+
 Mon Sep 20 13:29:41 1999  Mark Mitchell  <mark@codesourcery.com>
 
        * invoke.texi (-fthis-is-variable): Remove documentation.

diff --git a/gcc/config/i386/sol2.h b/gcc/config/i386/sol2.h
index b156812..43c74c3 100644 (file)
--- a/gcc/config/i386/sol2.h
+++ b/gcc/config/i386/sol2.h
@@ -21,6 +21,33 @@ Boston, MA 02111-1307, USA.  */
 
 #include "i386/sysv4.h"
 
+/* We use stabs-in-elf for debugging, because that is what the native
+   toolchain uses.  */
+#undef PREFERRED_DEBUGGING_TYPE
+#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
+
+#if ! GAS_REJECTS_MINUS_S
+
+/*
+  Changed from config/svr4.h in the following ways:
+
+  - Removed -Yd (neither the sun bundled assembler nor gas accept it).
+  - Added "-s" so that stabs are not discarded.
+*/
+
+#undef ASM_SPEC
+#define ASM_SPEC \
+  "%{v:-V} %{Qy:} %{!Qn:-Qy} %{n} %{T} %{Ym,*} %{Wa,*:%*} -s"
+
+#else /* GAS_REJECTS_MINUS_S */
+
+/* Same as above, except for -s, unsupported by GNU as.  */
+#undef ASM_SPEC
+#define ASM_SPEC \
+  "%{v:-V} %{Qy:} %{!Qn:-Qy} %{n} %{T} %{Ym,*} %{Wa,*:%*}"
+
+#endif /* GAS_REJECTS_MINUS_S */
+
 /* The Solaris 2.0 x86 linker botches alignment of code sections.
    It tries to align to a 16 byte boundary by padding with 0x00000090
    ints, rather than 0x90 bytes (nop).  This generates trash in the

diff --git a/gcc/config/i386/sol2dbg.h b/gcc/config/i386/sol2dbg.h
deleted file mode 100644 (file)
index 9f95333..0000000
--- a/gcc/config/i386/sol2dbg.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Target definitions for GNU compiler for Intel 80386 running Solaris
-   with gas and gdb.
-   This file is added into the directory .../gcc-2.../config/i386
-   Workability without "#undef DWARF_DEBUGGING_INFO" is not tested. */
-
-/* Use stabs instead of DWARF debug format.  */
-#ifdef PREFERRED_DEBUGGING_TYPE
-#undef PREFERRED_DEBUGGING_TYPE
-#endif
-#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
-
-#include "i386/sol2.h"
-
-#ifdef DWARF_DEBUGGING_INFO
-#undef DWARF_DEBUGGING_INFO
-#endif
-
-/*
-  Changed from config/svr4.h in the following ways:
-
-  - Added "%{V}".
-  - Modified "{%v:-V}" to take into account "%{V}".
-  - Added "-s" so that stabs are saved in the final executable.  */
-
-#undef ASM_SPEC
-#define ASM_SPEC \
-  "%{V} %{v:%{!V:-V}} %{Qy:} %{!Qn:-Qy} %{n} %{T} %{Ym,*} %{Yd,*} %{Wa,*:%*} -s"

diff --git a/gcc/config/i386/sol2gas.h b/gcc/config/i386/sol2gas.h
new file mode 100644 (file)
index 0000000..f8ca103
--- /dev/null
+++ b/gcc/config/i386/sol2gas.h
@@ -0,0 +1,11 @@
+/* Definitions of target machine for GNU compiler, for SPARC running
+   Solaris 2 with GNU as up to 2.9.5.0.12.
+   
+   Copyright (C) 1999 Free Software Foundation, Inc.
+*/
+
+#ifndef GAS_REJECTS_MINUS_S
+#define GAS_REJECTS_MINUS_S 1
+#endif
+
+/* Assume sol2.h will be included afterwards.  */

diff --git a/gcc/configure b/gcc/configure
index 3efcd2d..1685100 100755 (executable)
--- a/gcc/configure
+++ b/gcc/configure
@@ -1334,7 +1334,7 @@ else
 fi
 
 # Find some useful tools
-for ac_prog in gawk mawk nawk awk
+for ac_prog in mawk gawk nawk awk
 do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
@@ -3992,11 +3992,10 @@ for machine in $build $host $target; do
        i[34567]86-*-solaris2*)
                xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
                xm_defines="USG POSIX SMALL_ARG_MAX"
-               if test x$stabs = xyes
-               then
-                       tm_file=i386/sol2dbg.h
-               else
-                       tm_file=i386/sol2.h
+               tm_file=i386/sol2.h
+               if test x$gas = xyes; then
+                       # Only needed if gas does not support -s
+                       tm_file="i386/sol2gas.h ${tm_file}"
                fi
                tmake_file=i386/t-sol2
                extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
@@ -6356,7 +6355,7 @@ fi
 
 
         echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:6360: checking for strerror in -lcposix" >&5
+echo "configure:6359: checking for strerror in -lcposix" >&5
 ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -6364,7 +6363,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lcposix  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 6368 "configure"
+#line 6367 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -6375,7 +6374,7 @@ int main() {
 strerror()
 ; return 0; }
 EOF
-if { (eval echo configure:6379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6378: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -6398,12 +6397,12 @@ fi
   
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:6402: checking for working const" >&5
+echo "configure:6401: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6407 "configure"
+#line 6406 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -6452,7 +6451,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:6456: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6455: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -6473,21 +6472,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:6477: checking for inline" >&5
+echo "configure:6476: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 6484 "configure"
+#line 6483 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:6491: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6490: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -6513,12 +6512,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:6517: checking for off_t" >&5
+echo "configure:6516: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6522 "configure"
+#line 6521 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -6546,12 +6545,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:6550: checking for size_t" >&5
+echo "configure:6549: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6555 "configure"
+#line 6554 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -6581,19 +6580,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:6585: checking for working alloca.h" >&5
+echo "configure:6584: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6590 "configure"
+#line 6589 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:6597: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -6614,12 +6613,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:6618: checking for alloca" >&5
+echo "configure:6617: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6623 "configure"
+#line 6622 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -6647,7 +6646,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:6651: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -6679,12 +6678,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:6683: checking whether alloca needs Cray hooks" >&5
+echo "configure:6682: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6688 "configure"
+#line 6687 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -6709,12 +6708,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6713: checking for $ac_func" >&5
+echo "configure:6712: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6718 "configure"
+#line 6717 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -6737,7 +6736,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:6741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6740: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -6764,7 +6763,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:6768: checking stack direction for C alloca" >&5
+echo "configure:6767: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6772,7 +6771,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 6776 "configure"
+#line 6775 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -6791,7 +6790,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:6795: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -6816,17 +6815,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6820: checking for $ac_hdr" >&5
+echo "configure:6819: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6825 "configure"
+#line 6824 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6830: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6855,12 +6854,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6859: checking for $ac_func" >&5
+echo "configure:6858: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6864 "configure"
+#line 6863 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -6883,7 +6882,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:6887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -6908,7 +6907,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:6912: checking for working mmap" >&5
+echo "configure:6911: checking for working mmap" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6916,7 +6915,7 @@ else
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 6920 "configure"
+#line 6919 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -7056,7 +7055,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:7060: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -7084,17 +7083,17 @@ unistd.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7088: checking for $ac_hdr" >&5
+echo "configure:7087: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7093 "configure"
+#line 7092 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7098: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7097: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7124,12 +7123,12 @@ done
 strdup __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7128: checking for $ac_func" >&5
+echo "configure:7127: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7133 "configure"
+#line 7132 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7152,7 +7151,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7156: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7155: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7181,12 +7180,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7185: checking for $ac_func" >&5
+echo "configure:7184: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7190 "configure"
+#line 7189 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7209,7 +7208,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7243,19 +7242,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:7247: checking for LC_MESSAGES" >&5
+echo "configure:7246: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7252 "configure"
+#line 7251 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:7259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -7276,7 +7275,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:7280: checking whether NLS is requested" >&5
+echo "configure:7279: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -7296,7 +7295,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:7300: checking whether included gettext is requested" >&5
+echo "configure:7299: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -7315,17 +7314,17 @@ fi
 
        ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:7319: checking for libintl.h" >&5
+echo "configure:7318: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7324 "configure"
+#line 7323 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7329: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7328: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7342,19 +7341,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:7346: checking for gettext in libc" >&5
+echo "configure:7345: checking for gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7351 "configure"
+#line 7350 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:7358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7357: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -7370,7 +7369,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
           if test "$gt_cv_func_gettext_libc" != "yes"; then
             echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:7374: checking for bindtextdomain in -lintl" >&5
+echo "configure:7373: checking for bindtextdomain in -lintl" >&5
 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7378,7 +7377,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7382 "configure"
+#line 7381 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7389,7 +7388,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:7393: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7405,12 +7404,12 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:7409: checking for gettext in libintl" >&5
+echo "configure:7408: checking for gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:7414: checking for gettext in -lintl" >&5
+echo "configure:7413: checking for gettext in -lintl" >&5
 ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7418,7 +7417,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7422 "configure"
+#line 7421 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7429,7 +7428,7 @@ int main() {
 gettext()
 ; return 0; }
 EOF
-if { (eval echo configure:7433: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7432: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7468,7 +7467,7 @@ EOF
              # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7472: checking for $ac_word" >&5
+echo "configure:7471: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7502,12 +7501,12 @@ fi
                for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7506: checking for $ac_func" >&5
+echo "configure:7505: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7511 "configure"
+#line 7510 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7530,7 +7529,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7534: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7533: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7557,7 +7556,7 @@ done
                # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7561: checking for $ac_word" >&5
+echo "configure:7560: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7593,7 +7592,7 @@ fi
                # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7597: checking for $ac_word" >&5
+echo "configure:7596: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7625,7 +7624,7 @@ else
 fi
 
                cat > conftest.$ac_ext <<EOF
-#line 7629 "configure"
+#line 7628 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -7633,7 +7632,7 @@ extern int _nl_msg_cat_cntr;
                               return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:7637: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7636: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
                   DATADIRNAME=share
@@ -7656,7 +7655,7 @@ fi
 
         if test "$CATOBJEXT" = "NONE"; then
          echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:7660: checking whether catgets can be used" >&5
+echo "configure:7659: checking whether catgets can be used" >&5
          # Check whether --with-catgets or --without-catgets was given.
 if test "${with_catgets+set}" = set; then
   withval="$with_catgets"
@@ -7669,7 +7668,7 @@ fi
 
          if test "$nls_cv_use_catgets" = "yes"; then
                    echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:7673: checking for main in -li" >&5
+echo "configure:7672: checking for main in -li" >&5
 ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7677,14 +7676,14 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-li  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7681 "configure"
+#line 7680 "configure"
 #include "confdefs.h"
 
 int main() {
 main()
 ; return 0; }
 EOF
-if { (eval echo configure:7688: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7712,12 +7711,12 @@ else
 fi
 
            echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:7716: checking for catgets" >&5
+echo "configure:7715: checking for catgets" >&5
 if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7721 "configure"
+#line 7720 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char catgets(); below.  */
@@ -7740,7 +7739,7 @@ catgets();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7744: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_catgets=yes"
 else
@@ -7762,7 +7761,7 @@ EOF
               # Extract the first word of "gencat", so it can be a program name with args.
 set dummy gencat; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7766: checking for $ac_word" >&5
+echo "configure:7765: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7798,7 +7797,7 @@ fi
                 # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7802: checking for $ac_word" >&5
+echo "configure:7801: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7835,7 +7834,7 @@ fi
                   # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7839: checking for $ac_word" >&5
+echo "configure:7838: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7870,7 +7869,7 @@ fi
                 # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7874: checking for $ac_word" >&5
+echo "configure:7873: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7928,7 +7927,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7932: checking for $ac_word" >&5
+echo "configure:7931: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7962,7 +7961,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7966: checking for $ac_word" >&5
+echo "configure:7965: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7998,7 +7997,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8002: checking for $ac_word" >&5
+echo "configure:8001: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8091,7 +8090,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:8095: checking for catalogs to be installed" >&5
+echo "configure:8094: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -8119,17 +8118,17 @@ echo "configure:8095: checking for catalogs to be installed" >&5
    if test "$CATOBJEXT" = ".cat"; then
      ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:8123: checking for linux/version.h" >&5
+echo "configure:8122: checking for linux/version.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8128 "configure"
+#line 8127 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8133: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8132: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -8204,7 +8203,7 @@ fi
 
 
 echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:8208: checking whether windows registry support is requested" >&5
+echo "configure:8207: checking whether windows registry support is requested" >&5
 if test x$enable_win32_registry != xno; then
   cat >> confdefs.h <<\EOF
 #define ENABLE_WIN32_REGISTRY 1
@@ -8233,7 +8232,7 @@ esac
 
 if test x$enable_win32_registry != xno; then
   echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:8237: checking registry key on windows hosts" >&5
+echo "configure:8236: checking registry key on windows hosts" >&5
   cat >> confdefs.h <<EOF
 #define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
 EOF
@@ -8409,7 +8408,7 @@ fi
 
 # Figure out what assembler alignment features are present.
 echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:8413: checking assembler alignment features" >&5
+echo "configure:8412: checking assembler alignment features" >&5
 gcc_cv_as=
 gcc_cv_as_alignment_features=
 gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
@@ -8530,7 +8529,7 @@ fi
 echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
 
 echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:8534: checking assembler subsection support" >&5
+echo "configure:8533: checking assembler subsection support" >&5
 gcc_cv_as_subsections=
 if test x$gcc_cv_as != x; then
        # Check if we have .subsection
@@ -8572,7 +8571,7 @@ echo "$ac_t""$gcc_cv_as_subsections" 1>&6
 case "$target" in 
   sparc*-*-*)
     echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:8576: checking assembler .register pseudo-op support" >&5
+echo "configure:8575: checking assembler .register pseudo-op support" >&5
     gcc_cv_as_register_pseudo_op=
     if test x$gcc_cv_as != x; then
        # Check if we have .register
@@ -8589,7 +8588,7 @@ EOF
     echo "$ac_t""$gcc_cv_as_register_pseudo_op" 1>&6
 
     echo $ac_n "checking assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:8593: checking assembler offsetable %lo() support" >&5
+echo "configure:8592: checking assembler offsetable %lo() support" >&5
     gcc_cv_as_offsetable_lo10=
     if test x$gcc_cv_as != x; then
        # Check if assembler has offsetable %lo()
@@ -8626,7 +8625,7 @@ EOF
 
   i[34567]86-*-*)
     echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:8630: checking assembler instructions" >&5
+echo "configure:8629: checking assembler instructions" >&5
     gcc_cv_as_instructions=
     if test x$gcc_cv_as != x; then
        set "filds fists" "filds mem; fists mem"

diff --git a/gcc/configure.in b/gcc/configure.in
index 2ce4ac7..132b908 100644 (file)
--- a/gcc/configure.in
+++ b/gcc/configure.in
@@ -1543,11 +1543,10 @@ changequote(,)dnl
 changequote([,])dnl
                xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
                xm_defines="USG POSIX SMALL_ARG_MAX"
-               if test x$stabs = xyes
-               then
-                       tm_file=i386/sol2dbg.h
-               else
-                       tm_file=i386/sol2.h
+               tm_file=i386/sol2.h
+               if test x$gas = xyes; then
+                       # Only needed if gas does not support -s
+                       tm_file="i386/sol2gas.h ${tm_file}"
                fi
                tmake_file=i386/t-sol2
                extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"