gcc_cv_gas_major_version=`expr "$gcc_cv_gas_version" : "VERSION=\([0-9]*\)"`
gcc_cv_gas_minor_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
gcc_cv_gas_patch_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.[0-9]*\.\([0-9]*\)"`
+gcc_cv_gas_vers=`expr \( \( $gcc_cv_gas_major_version \* 1000 \) \
+ + $gcc_cv_gas_minor_version \) \* 1000 \
+ + $gcc_cv_gas_patch_version`
rm -f as$host_exeext
$symbolic_link ../gas/as-new$host_exeext as$host_exeext 2>/dev/null
# build->target linker and hope that it will have the same features
# as the host->target linker we'll be using.
echo $ac_n "checking what linker to use""... $ac_c" 1>&6
-echo "configure:5859: checking what linker to use" >&5
+echo "configure:5862: checking what linker to use" >&5
in_tree_ld=no
gcc_cv_ld=
gcc_cv_gld_major_version=
# Figure out what nm we will be using.
gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
echo $ac_n "checking what nm to use""... $ac_c" 1>&6
-echo "configure:5967: checking what nm to use" >&5
+echo "configure:5970: checking what nm to use" >&5
in_tree_nm=no
if test -x nm$host_exeext; then
gcc_cv_nm=./nm$host_exeext
# Figure out what objdump we will be using.
echo $ac_n "checking what objdump to use""... $ac_c" 1>&6
-echo "configure:5990: checking what objdump to use" >&5
+echo "configure:5993: checking what objdump to use" >&5
in_tree_objdump=no
if test -x objdump$host_exeext; then
gcc_cv_objdump=./objdump$host_exeext
esac
# Figure out what assembler alignment features are present.
-echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:6015: checking assembler alignment features" >&5
-gcc_cv_as_alignment_features=none
-if test $in_tree_gas = yes; then
- # Gas version 2.6 and later support for .balign and .p2align.
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 6 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
-
+echo $ac_n "checking assembler for .balign and .p2align""... $ac_c" 1>&6
+echo "configure:6018: checking assembler for .balign and .p2align" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_balign_and_p2align'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_balign_and_p2align=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 6 \) \* 1000 + 0`
+ then gcc_cv_as_balign_and_p2align=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo '.balign 4
+.p2align 2' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6030: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_balign_and_p2align=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
- gcc_cv_as_alignment_features=".balign and .p2align"
- cat >> confdefs.h <<\EOF
+echo "$ac_t""$gcc_cv_as_balign_and_p2align" 1>&6
+if test $gcc_cv_as_balign_and_p2align = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_GAS_BALIGN_AND_P2ALIGN 1
EOF
-
-
fi
- # Gas version 2.8 and later support specifying the maximum
- # bytes to skip when using .p2align.
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 8 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
-
-
- gcc_cv_as_alignment_features=".p2align including maximum skip"
- cat >> confdefs.h <<\EOF
-#define HAVE_GAS_MAX_SKIP_P2ALIGN 1
-EOF
-
-
-
+echo $ac_n "checking assembler for .p2align with maximum skip""... $ac_c" 1>&6
+echo "configure:6050: checking assembler for .p2align with maximum skip" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_max_skip_p2align'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_max_skip_p2align=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 8 \) \* 1000 + 0`
+ then gcc_cv_as_max_skip_p2align=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo '.p2align 4,,7' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6061: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_max_skip_p2align=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-elif test x$gcc_cv_as != x; then
- # Check if we have .balign and .p2align
- echo ".balign 4" > conftest.s
- echo ".p2align 2" >> conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_alignment_features=".balign and .p2align"
- cat >> confdefs.h <<\EOF
-#define HAVE_GAS_BALIGN_AND_P2ALIGN 1
-EOF
-
- fi
- rm -f conftest.s conftest.o
- # Check if specifying the maximum bytes to skip when
- # using .p2align is supported.
- echo ".p2align 4,,7" > conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_alignment_features=".p2align including maximum skip"
- cat >> confdefs.h <<\EOF
+echo "$ac_t""$gcc_cv_as_max_skip_p2align" 1>&6
+if test $gcc_cv_as_max_skip_p2align = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_GAS_MAX_SKIP_P2ALIGN 1
EOF
- fi
- rm -f conftest.s conftest.o
fi
-echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
-
-echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:6076: checking assembler subsection support" >&5
-gcc_cv_as_subsections=no
-if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 9 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
-
-
- test $in_tree_gas_is_elf = yes \
- && gcc_cv_as_subsections="working .subsection -1"
-
+echo $ac_n "checking assembler for working .subsection -1""... $ac_c" 1>&6
+echo "configure:6081: checking assembler for working .subsection -1" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_subsection_m1'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_subsection_m1=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 9 \) \* 1000 + 0`
+ then gcc_cv_as_subsection_m1=yes
fi
-
-elif test x$gcc_cv_as != x; then
- # Check if we have .subsection
- echo ".subsection 1" > conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_subsections=".subsection"
- if test x$gcc_cv_nm != x; then
- cat > conftest.s <<EOF
-conftest_label1: .word 0
+ elif test x$gcc_cv_as != x; then
+ echo 'conftest_label1: .word 0
.subsection -1
conftest_label2: .word 0
-.previous
-EOF
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- $gcc_cv_nm conftest.o | grep conftest_label1 > conftest.nm1
- $gcc_cv_nm conftest.o | grep conftest_label2 | sed -e 's/label2/label1/' > conftest.nm2
- if cmp conftest.nm1 conftest.nm2 > /dev/null 2>&1; then
- :
- else
- gcc_cv_as_subsections="working .subsection -1"
- fi
- fi
- fi
- fi
- rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
+.previous' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6096: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ if test x$gcc_cv_nm != x; then
+ $gcc_cv_nm conftest.o | grep conftest_label1 > conftest.nm1
+ $gcc_cv_nm conftest.o | grep conftest_label2 | sed -e 's/label2/label1/' > conftest.nm2
+ if cmp conftest.nm1 conftest.nm2 > /dev/null 2>&1
+ then :
+ else gcc_cv_as_subsection_m1=yes
+ fi
+ rm -f conftest.nm1 conftest.nm2
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-if test x"$gcc_cv_as_subsections" = x"working .subsection -1"; then
- cat >> confdefs.h <<\EOF
+
+echo "$ac_t""$gcc_cv_as_subsection_m1" 1>&6
+if test $gcc_cv_as_subsection_m1 = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_GAS_SUBSECTION_ORDERING 1
EOF
fi
-echo "$ac_t""$gcc_cv_as_subsections" 1>&6
-
-echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:6124: checking assembler weak support" >&5
-gcc_cv_as_weak=no
-if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 2 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
-
-
- gcc_cv_as_weak="yes"
-
+echo $ac_n "checking assembler for .weak""... $ac_c" 1>&6
+echo "configure:6124: checking assembler for .weak" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_weak'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_weak=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 2 \) \* 1000 + 0`
+ then gcc_cv_as_weak=yes
fi
-
-elif test x$gcc_cv_as != x; then
- # Check if we have .weak
- echo " .weak foobar" > conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_weak="yes"
- fi
- rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
+ elif test x$gcc_cv_as != x; then
+ echo ' .weak foobar' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6135: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_weak=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-if test x"$gcc_cv_as_weak" = xyes; then
- cat >> confdefs.h <<\EOF
+
+echo "$ac_t""$gcc_cv_as_weak" 1>&6
+if test $gcc_cv_as_weak = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_GAS_WEAK 1
EOF
fi
-echo "$ac_t""$gcc_cv_as_weak" 1>&6
-
-echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:6154: checking assembler hidden support" >&5
-gcc_cv_as_hidden=no
-if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& (test $gcc_cv_gas_minor_version -gt 12 \
- || (test $gcc_cv_gas_minor_version -eq 12 \
- && test $gcc_cv_gas_patch_version -ge 1 )) \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
+# .hidden needs to be supported in both the assembler and the linker,
+# because GNU LD versions before 2.12.1 have buggy support for STV_HIDDEN.
+# This is irritatingly difficult to feature test for; we have to check the
+# date string after the version number. If we've got an in-tree
+# ld, we don't know its patchlevel version, so we set the baseline at 2.13
+# to be safe.
+# The gcc_GAS_CHECK_FEATURE call just sets a cache variable.
+echo $ac_n "checking assembler for .hidden""... $ac_c" 1>&6
+echo "configure:6162: checking assembler for .hidden" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_hidden'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_hidden=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 13 \) \* 1000 + 0`
+ then gcc_cv_as_hidden=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo ' .hidden foobar
+foobar:' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6175: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_hidden=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
- test $in_tree_gas_is_elf = yes && gcc_cv_as_hidden="yes"
-
+echo "$ac_t""$gcc_cv_as_hidden" 1>&6
-fi
-elif test x$gcc_cv_as != x; then
- # Check if we have .hidden
- echo " .hidden foobar" > conftest.s
- echo "foobar:" >> conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_hidden="yes"
- fi
- rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
-
- # GNU LD versions before 2.12.1 have buggy support for STV_HIDDEN.
- # This is irritatingly difficult to feature test for. Look for
- # the date string after the version number.
- ld_ver=`$gcc_cv_ld --version 2>/dev/null | head -1`
- if echo "$ld_ver" | grep GNU > /dev/null; then
- ld_vers=`echo $ld_ver | sed -n \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p'`
- ld_date=`echo $ld_ver | sed -n 's,^.*\([2-9][0-9][0-9][0-9]\)[-]*\([01][0-9]\)[-]*\([0-3][0-9]\).*$,\1\2\3,p'`
- if test 0"$ld_date" -lt 20020404; then
- if test -n "$ld_date"; then
- # If there was date string, but was earlier than 2002-04-04, fail
- gcc_cv_as_hidden="no"
- elif test -z "$ld_vers"; then
- # If there was no date string nor ld version number, something is wrong
- gcc_cv_as_hidden="no"
- else
- ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
- ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
- ld_vers_patch=`expr "$ld_vers" : '[0-9]*\.[0-9]*\.\([0-9]*\)'`
- test -z "$ld_vers_patch" && ld_vers_patch=0
- if test "$ld_vers_major" -lt 2; then
- gcc_cv_as_hidden="no"
- elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 12; then
- gcc_cv_as_hidden="no"
- elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -eq 12 \
- -a "$ld_vers_patch" -eq 0; then
- gcc_cv_as_hidden="no"
- fi
- fi
- fi
+echo $ac_n "checking linker for .hidden support""... $ac_c" 1>&6
+echo "configure:6190: checking linker for .hidden support" >&5
+if eval "test \"`echo '$''{'gcc_cv_ld_hidden'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test $in_tree_ld = yes ; then
+ gcc_cv_ld_hidden=no
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 13 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_hidden=yes
+ fi
+else
+ gcc_cv_ld_hidden=yes
+ ld_ver=`$gcc_cv_ld --version 2>/dev/null | head -1`
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ ld_vers=`echo $ld_ver | sed -n \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p' \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p' \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p'`
+ ld_date=`echo $ld_ver | sed -n 's,^.*\([2-9][0-9][0-9][0-9]\)[-]*\([01][0-9]\)[-]*\([0-3][0-9]\).*$,\1\2\3,p'`
+ if test 0"$ld_date" -lt 20020404; then
+ if test -n "$ld_date"; then
+ # If there was date string, but was earlier than 2002-04-04, fail
+ gcc_cv_ld_hidden=no
+ elif test -z "$ld_vers"; then
+ # If there was no date string nor ld version number, something is wrong
+ gcc_cv_ld_hidden=no
+ else
+ ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
+ ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
+ ld_vers_patch=`expr "$ld_vers" : '[0-9]*\.[0-9]*\.\([0-9]*\)'`
+ test -z "$ld_vers_patch" && ld_vers_patch=0
+ if test "$ld_vers_major" -lt 2; then
+ gcc_cv_ld_hidden=no
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 12; then
+ gcc_cv_ld_hidden="no"
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -eq 12 -a "$ld_vers_patch" -eq 0; then
+ gcc_cv_ld_hidden=no
fi
-fi
-case "$target" in
- mips-sgi-irix6*)
- if test x"$gnu_ld_flag" = x"no"; then
- # Even if using gas with .hidden support, the resulting object files
- # cannot be linked with the IRIX 6 O32 linker. With the N32 and
- # N64 linkers, the problem is that the linker refuses to accept
- # -call_shared (passed by default to the linker) and -r (used to
- # link the object file generated without .hidden directives with
- # one that hides symbols), so we also lose.
- gcc_cv_as_hidden=no
+ fi
fi
- ;;
-esac
-if test x"$gcc_cv_as_hidden" = xyes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_GAS_HIDDEN 1
-EOF
-
+ else
+ case "$target" in
+ mips-sgi-irix6*)
+ if test x"$gnu_ld_flag" = x"no"; then
+ # Even if using gas with .hidden support, the resulting object files
+ # cannot be linked with the IRIX 6 O32 linker. With the N32 and
+ # N64 linkers, the problem is that the linker refuses to accept
+ # -call_shared (passed by default to the linker) and -r (used to
+ # link the object file generated without .hidden directives with
+ # one that hides symbols), so we also lose.
+ gcc_cv_ld_hidden=no
+ fi
+ ;;
+ esac
+ fi
+fi
fi
-echo "$ac_t""$gcc_cv_as_hidden" 1>&6
-libgcc_visibility=$gcc_cv_as_hidden
-
-
-echo $ac_n "checking assembler leb128 support""... $ac_c" 1>&6
-echo "configure:6239: checking assembler leb128 support" >&5
-gcc_cv_as_leb128=no
-if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 11 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
+echo "$ac_t""$gcc_cv_ld_hidden" 1>&6
+libgcc_visibility=no
- test $in_tree_gas_is_elf = yes && gcc_cv_as_leb128="yes"
-
+if test $gcc_cv_as_hidden = yes && test $gcc_cv_ld_hidden=yes; then
+ libgcc_visibility=yes
+ cat >> confdefs.h <<\EOF
+#define HAVE_GAS_HIDDEN 1
+EOF
fi
-elif test x$gcc_cv_as != x; then
- # Check if we have .[us]leb128, and support symbol arithmetic with it.
- cat > conftest.s <<EOF
- .data
+# Check if we have .[us]leb128, and support symbol arithmetic with it.
+echo $ac_n "checking assembler for .sleb128 and .uleb128""... $ac_c" 1>&6
+echo "configure:6264: checking assembler for .sleb128 and .uleb128" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_leb128'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_leb128=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 11 \) \* 1000 + 0`
+ then gcc_cv_as_leb128=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo ' .data
.uleb128 L2 - L1
L1:
.uleb128 1280
.sleb128 -1010
-L2:
-EOF
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_leb128="yes"
-
- # GAS versions before 2.11 do not support uleb128,
- # despite appearing to.
- # ??? There exists an elf-specific test that will crash
- # the assembler. Perhaps it's better to figure out whether
- # arbitrary sections are supported and try the test.
- as_ver=`$gcc_cv_as --version 2>/dev/null | head -1`
- if echo "$as_ver" | grep GNU > /dev/null; then
- as_ver=`echo $as_ver | sed -e 's/GNU assembler \([0-9.][0-9.]*\).*/\1/'`
- as_major=`echo $as_ver | sed 's/\..*//'`
- as_minor=`echo $as_ver | sed 's/[^.]*\.\([0-9]*\).*/\1/'`
- if test $as_major -eq 2 -a $as_minor -lt 11; then
- gcc_cv_as_leb128="no"
- fi
- fi
- fi
- rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
+L2:' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6281: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ # GAS versions before 2.11 do not support uleb128,
+ # despite appearing to.
+ # ??? There exists an elf-specific test that will crash
+ # the assembler. Perhaps it's better to figure out whether
+ # arbitrary sections are supported and try the test.
+ as_ver=`$gcc_cv_as --version 2>/dev/null | head -1`
+ if echo "$as_ver" | grep GNU > /dev/null; then
+ as_ver=`echo $as_ver | sed -e 's/GNU assembler \([0-9.][0-9.]*\).*/\1/'`
+ as_major=`echo $as_ver | sed 's/\..*//'`
+ as_minor=`echo $as_ver | sed 's/[^.]*\.\([0-9]*\).*/\1/'`
+ if test $as_major -eq 2 && test $as_minor -lt 11
+ then :
+ else gcc_cv_as_leb128=yes
+ fi
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-if test x"$gcc_cv_as_leb128" = xyes; then
- cat >> confdefs.h <<\EOF
+
+echo "$ac_t""$gcc_cv_as_leb128" 1>&6
+if test $gcc_cv_as_leb128 = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_LEB128 1
EOF
fi
-echo "$ac_t""$gcc_cv_as_leb128" 1>&6
-
-echo $ac_n "checking assembler eh_frame optimization""... $ac_c" 1>&6
-echo "configure:6291: checking assembler eh_frame optimization" >&5
-gcc_cv_as_eh_frame=no
-if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 12 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
-
-
- test $in_tree_gas_is_elf = yes && gcc_cv_as_eh_frame="yes"
-
+# GAS versions up to and including 2.11.0 may mis-optimize
+# .eh_frame data.
+echo $ac_n "checking assembler for eh_frame optimization""... $ac_c" 1>&6
+echo "configure:6317: checking assembler for eh_frame optimization" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_eh_frame'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_eh_frame=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 12 \) \* 1000 + 0`
+ then gcc_cv_as_eh_frame=yes
fi
-
-elif test x$gcc_cv_as != x; then
- # Check if this is GAS.
- as_ver=`$gcc_cv_as --version < /dev/null 2> /dev/null | head -1`
- rm -f a.out 2> /dev/null
- if echo "$as_ver" | grep GNU > /dev/null; then
- # Versions up to and including 2.11.0 may mis-optimize
- # .eh_frame data. Try something.
- cat > conftest.s <<EOF
- .text
+ elif test x$gcc_cv_as != x; then
+ echo ' .text
.LFB1:
.4byte 0
.L1:
.4byte .LFE1-.LFB1
.byte 0x4
.4byte .L1-.LFB1
-.LEFDE1:
-EOF
- cat > conftest.lit <<EOF
+.LEFDE1:' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6360: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ cat > conftest.lit <<EOF
0000 10000000 00000000 017a0001 781a0004 .........z..x...
0010 01000000 12000000 18000000 00000000 ................
0020 08000000 04080000 0044 .........D
EOF
- cat > conftest.big <<EOF
+ cat > conftest.big <<EOF
0000 00000010 00000000 017a0001 781a0004 .........z..x...
0010 00000001 00000012 00000018 00000000 ................
0020 00000008 04000000 0844 .........D
EOF
- # If the assembler didn't choke, and we can objdump,
- # and we got the correct data, then succeed.
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1 \
- && $gcc_cv_objdump -s -j .eh_frame conftest.o 2>/dev/null \
- | tail -3 > conftest.got \
- && { cmp conftest.lit conftest.got > /dev/null 2>&1 \
- || cmp conftest.big conftest.got > /dev/null 2>&1; }
- then
- gcc_cv_as_eh_frame="yes"
- else
- gcc_cv_as_eh_frame="bad"
- if $gcc_cv_as -o conftest.o --traditional-format /dev/null; then
- cat >> confdefs.h <<\EOF
-#define USE_AS_TRADITIONAL_FORMAT 1
-EOF
-
- fi
- fi
- fi
- rm -f conftest.*
+ # If the assembler didn't choke, and we can objdump,
+ # and we got the correct data, then succeed.
+ if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -s -j .eh_frame conftest.o 2>/dev/null \
+ | tail -3 > conftest.got \
+ && { cmp conftest.lit conftest.got > /dev/null 2>&1 \
+ || cmp conftest.big conftest.got > /dev/null 2>&1; }
+ then
+ gcc_cv_as_eh_frame=yes
+ elif { ac_try='$gcc_cv_as -o conftest.o --traditional-format /dev/null'; { (eval echo configure:6381: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ gcc_cv_as_eh_frame=buggy
+ else
+ # Uh oh, what do we do now?
+ gcc_cv_as_eh_frame=no
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-echo "$ac_t""$gcc_cv_as_eh_frame" 1>&6
-echo $ac_n "checking assembler section merging support""... $ac_c" 1>&6
-echo "configure:6379: checking assembler section merging support" >&5
-gcc_cv_as_shf_merge=no
-if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 12 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
+echo "$ac_t""$gcc_cv_as_eh_frame" 1>&6
- test $in_tree_gas_is_elf = yes && gcc_cv_as_shf_merge="yes"
-
+if test $gcc_cv_as_eh_frame = buggy; then
+ cat >> confdefs.h <<\EOF
+#define USE_AS_TRADITIONAL_FORMAT 1
+EOF
fi
-elif test x$gcc_cv_as != x; then
- # Check if we support SHF_MERGE sections
- echo '.section .rodata.str, "aMS", @progbits, 1' > conftest.s
- if $gcc_cv_as --fatal-warnings -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_shf_merge=yes
- fi
- rm -f conftest.s conftest.o
+echo $ac_n "checking assembler for section merging support""... $ac_c" 1>&6
+echo "configure:6406: checking assembler for section merging support" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_shf_merge'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_shf_merge=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 12 \) \* 1000 + 0`
+ then gcc_cv_as_shf_merge=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo '.section .rodata.str, "aMS", @progbits, 1' > conftest.s
+ if { ac_try='$gcc_cv_as --fatal-warnings -o conftest.o conftest.s >&5'; { (eval echo configure:6418: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_shf_merge=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-if test x"$gcc_cv_as_shf_merge" = xyes; then
- cat >> confdefs.h <<\EOF
+
+echo "$ac_t""$gcc_cv_as_shf_merge" 1>&6
+if test $gcc_cv_as_shf_merge = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_GAS_SHF_MERGE 1
EOF
fi
-echo "$ac_t""$gcc_cv_as_shf_merge" 1>&6
-echo $ac_n "checking assembler thread-local storage support""... $ac_c" 1>&6
-echo "configure:6409: checking assembler thread-local storage support" >&5
-gcc_cv_as_tls=no
+# Thread-local storage - the check is heavily parametrized.
conftest_s=
tls_first_major=
tls_first_minor=
;;
esac
if test -z "$tls_first_major"; then
- :
-elif test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq $tls_first_major \
-&& test $gcc_cv_gas_minor_version -ge $tls_first_minor \
-|| test $gcc_cv_gas_major_version -gt $tls_first_major ; then
-
-
- gcc_cv_as_tls=yes
-
-
+ : # If we don't have a check, assume no support.
+else
+ echo $ac_n "checking assembler for thread-local storage support""... $ac_c" 1>&6
+echo "configure:6617: checking assembler for thread-local storage support" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_tls'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_tls=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( $tls_first_major \* 1000 \) + $tls_first_minor \) \* 1000 + 0`
+ then gcc_cv_as_tls=yes
fi
-
-elif test x$gcc_cv_as != x; then
- echo "$conftest_s" > conftest.s
- if $gcc_cv_as $tls_as_opt --fatal-warnings -o conftest.o conftest.s > /dev/null 2>&1
- then
- gcc_cv_as_tls=yes
+ elif test x$gcc_cv_as != x; then
+ echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as $tls_as_opt --fatal-warnings -o conftest.o conftest.s >&5'; { (eval echo configure:6628: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_tls=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
fi
- rm -f conftest.s conftest.o
fi
-if test "$gcc_cv_as_tls" = yes; then
+
+echo "$ac_t""$gcc_cv_as_tls" 1>&6
+if test $gcc_cv_as_tls = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_AS_TLS 1
EOF
fi
-echo "$ac_t""$gcc_cv_as_tls" 1>&6
+fi
+
+# Target-specific assembler checks.
case "$target" in
# All TARGET_ABI_OSF targets.
alpha*-*-osf* | alpha*-*-linux* | alpha*-*-*bsd*)
- echo $ac_n "checking assembler supports explicit relocations""... $ac_c" 1>&6
-echo "configure:6619: checking assembler supports explicit relocations" >&5
-if eval "test \"`echo '$''{'gcc_cv_as_explicit_relocs'+set}'`\" = set"; then
+ echo $ac_n "checking assembler for explicit relocation support""... $ac_c" 1>&6
+echo "configure:6654: checking assembler for explicit relocation support" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_alpha_explicit_relocs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
-
- gcc_cv_as_explicit_relocs=unknown
- if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 12 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
-
-
- gcc_cv_as_explicit_relocs=yes
-
-
+ gcc_cv_as_alpha_explicit_relocs=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 12 \) \* 1000 + 0`
+ then gcc_cv_as_alpha_explicit_relocs=yes
fi
-
- elif test x$gcc_cv_as != x; then
- cat > conftest.s << 'EOF'
- .set nomacro
+ elif test x$gcc_cv_as != x; then
+ echo ' .set nomacro
.text
extbl $3, $2, $3 !lituse_bytoff!1
ldq $2, a($29) !literal!1
lda $0, c($29) !gprel
ldah $1, d($29) !gprelhigh
lda $1, d($1) !gprellow
- lda $29, 0($29) !gpdisp!3
-EOF
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_explicit_relocs=yes
- else
- gcc_cv_as_explicit_relocs=no
- fi
- rm -f conftest.s conftest.o
- fi
-
+ lda $29, 0($29) !gpdisp!3' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6677: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_alpha_explicit_relocs=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-echo "$ac_t""$gcc_cv_as_explicit_relocs" 1>&6
- if test "x$gcc_cv_as_explicit_relocs" = xyes; then
- cat >> confdefs.h <<\EOF
+echo "$ac_t""$gcc_cv_as_alpha_explicit_relocs" 1>&6
+if test $gcc_cv_as_alpha_explicit_relocs = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_EXPLICIT_RELOCS 1
EOF
- fi
+fi
;;
+
sparc*-*-*)
- echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:6672: checking assembler .register pseudo-op support" >&5
-if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
+ echo $ac_n "checking assembler for .register""... $ac_c" 1>&6
+echo "configure:6699: checking assembler for .register" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_sparc_register_op'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
-
- gcc_cv_as_register_pseudo_op=unknown
- if test x$gcc_cv_as != x; then
- # Check if we have .register
- echo ".register %g2, #scratch" > conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_register_pseudo_op=yes
- else
- gcc_cv_as_register_pseudo_op=no
- fi
- rm -f conftest.s conftest.o
- fi
-
+ gcc_cv_as_sparc_register_op=no
+ if test x$gcc_cv_as != x; then
+ echo '.register %g2, #scratch' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6706: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_sparc_register_op=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-echo "$ac_t""$gcc_cv_as_register_pseudo_op" 1>&6
- if test "x$gcc_cv_as_register_pseudo_op" = xyes; then
- cat >> confdefs.h <<\EOF
+echo "$ac_t""$gcc_cv_as_sparc_register_op" 1>&6
+if test $gcc_cv_as_sparc_register_op = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_REGISTER_PSEUDO_OP 1
EOF
- fi
+fi
- echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
-echo "configure:6700: checking assembler supports -relax" >&5
-if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
+ echo $ac_n "checking assembler for -relax option""... $ac_c" 1>&6
+echo "configure:6726: checking assembler for -relax option" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_sparc_relax'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
-
- gcc_cv_as_relax_opt=unknown
- if test x$gcc_cv_as != x; then
- # Check if gas supports -relax
- echo ".text" > conftest.s
- if $gcc_cv_as -relax -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_relax_opt=yes
- else
- gcc_cv_as_relax_opt=no
- fi
- rm -f conftest.s conftest.o
- fi
-
+ gcc_cv_as_sparc_relax=no
+ if test x$gcc_cv_as != x; then
+ echo '.text' > conftest.s
+ if { ac_try='$gcc_cv_as -relax -o conftest.o conftest.s >&5'; { (eval echo configure:6733: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_sparc_relax=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-echo "$ac_t""$gcc_cv_as_relax_opt" 1>&6
- if test "x$gcc_cv_as_relax_opt" = xyes; then
- cat >> confdefs.h <<\EOF
+echo "$ac_t""$gcc_cv_as_sparc_relax" 1>&6
+if test $gcc_cv_as_sparc_relax = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_RELAX_OPTION 1
EOF
- fi
+fi
- echo $ac_n "checking assembler and linker support unaligned pc related relocs""... $ac_c" 1>&6
-echo "configure:6728: checking assembler and linker support unaligned pc related relocs" >&5
+ echo $ac_n "checking assembler for unaligned pcrel relocs""... $ac_c" 1>&6
+echo "configure:6753: checking assembler for unaligned pcrel relocs" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
-
- gcc_cv_as_sparc_ua_pcrel=unknown
- if test x$gcc_cv_as != x -a x$gcc_cv_ld != x; then
- gcc_cv_as_sparc_ua_pcrel=no
- echo ".text; foo: nop; .data; .align 4; .byte 0; .uaword %r_disp32(foo)" > conftest.s
- if $gcc_cv_as -K PIC -o conftest.o conftest.s > /dev/null 2>&1 \
- && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
- gcc_cv_as_sparc_ua_pcrel=yes
- fi
- rm -f conftest.s conftest.o conftest
- fi
-
+ gcc_cv_as_sparc_ua_pcrel=no
+ if test x$gcc_cv_as != x; then
+ echo '.text
+foo:
+ nop
+.data
+.align 4
+.byte 0
+.uaword %r_disp32(foo)' > conftest.s
+ if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'; { (eval echo configure:6766: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
+ gcc_cv_as_sparc_ua_pcrel=yes
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
echo "$ac_t""$gcc_cv_as_sparc_ua_pcrel" 1>&6
- if test "x$gcc_cv_as_sparc_ua_pcrel" = xyes; then
- cat >> confdefs.h <<\EOF
+if test $gcc_cv_as_sparc_ua_pcrel = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_SPARC_UA_PCREL 1
EOF
- fi
- echo $ac_n "checking assembler and linker support unaligned pc related relocs against hidden symbols""... $ac_c" 1>&6
-echo "configure:6755: checking assembler and linker support unaligned pc related relocs against hidden symbols" >&5
+ echo $ac_n "checking assembler for unaligned pcrel relocs against hidden symbols""... $ac_c" 1>&6
+echo "configure:6789: checking assembler for unaligned pcrel relocs against hidden symbols" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel_hidden'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
-
- if test "x$gcc_cv_as_sparc_ua_pcrel" = xyes; then
- gcc_cv_as_sparc_ua_pcrel_hidden=unknown
- if test x$gcc_cv_objdump != x; then
- gcc_cv_as_sparc_ua_pcrel_hidden=no
- echo ".data; .align 4; .byte 0x31; .uaword %r_disp32(foo)" > conftest.s
- echo ".byte 0x32, 0x33, 0x34; .global foo; .hidden foo" >> conftest.s
- echo "foo: .skip 4" >> conftest.s
- if $gcc_cv_as -K PIC -o conftest.o conftest.s > /dev/null 2>&1 \
- && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1 \
- && $gcc_cv_objdump -s -j .data conftest 2> /dev/null \
- | grep ' 31000000 07323334' > /dev/null 2>&1; then
- if $gcc_cv_objdump -R conftest 2> /dev/null \
- | grep 'DISP32' > /dev/null 2>&1; then
- :
- else
- gcc_cv_as_sparc_ua_pcrel_hidden=yes
- fi
- fi
+ gcc_cv_as_sparc_ua_pcrel_hidden=no
+ if test x$gcc_cv_as != x; then
+ echo '.data
+.align 4
+.byte 0x31
+.uaword %r_disp32(foo)
+.byte 0x32, 0x33, 0x34
+.global foo
+.hidden foo
+foo:
+.skip 4' > conftest.s
+ if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'; { (eval echo configure:6804: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ if test x$gcc_cv_ld != x && test x$gcc_cv_objdump != x \
+ && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1 \
+ && $gcc_cv_objdump -s -j .data conftest 2> /dev/null \
+ | grep ' 31000000 07323334' > /dev/null 2>&1; then
+ if $gcc_cv_objdump -R conftest 2> /dev/null \
+ | grep 'DISP32' > /dev/null 2>&1; then
+ :
+ else
+ gcc_cv_as_sparc_ua_pcrel_hidden=yes
fi
- rm -f conftest.s conftest.o conftest
- else
- gcc_cv_as_sparc_ua_pcrel_hidden="$gcc_cv_as_sparc_ua_pcrel"
- fi
-
+ fi
+ rm -f conftest
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
echo "$ac_t""$gcc_cv_as_sparc_ua_pcrel_hidden" 1>&6
- if test "x$gcc_cv_as_sparc_ua_pcrel_hidden" = xyes; then
- cat >> confdefs.h <<\EOF
+if test $gcc_cv_as_sparc_ua_pcrel_hidden = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_SPARC_UA_PCREL_HIDDEN 1
EOF
- fi
+fi
+
+fi # unaligned pcrel relocs
- echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:6795: checking for assembler offsetable %lo() support" >&5
-if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
+ echo $ac_n "checking assembler for offsetable %lo()""... $ac_c" 1>&6
+echo "configure:6837: checking assembler for offsetable %lo()" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_sparc_offsetable_lo10'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
-
- gcc_cv_as_offsetable_lo10=unknown
- if test "x$gcc_cv_as" != x; then
- # Check if assembler has offsetable %lo()
- echo "or %g1, %lo(ab) + 12, %g1" > conftest.s
- echo "or %g1, %lo(ab + 12), %g1" > conftest1.s
- if $gcc_cv_as -xarch=v9 -o conftest.o conftest.s \
- > /dev/null 2>&1 &&
- $gcc_cv_as -xarch=v9 -o conftest1.o conftest1.s \
- > /dev/null 2>&1; then
- if cmp conftest.o conftest1.o > /dev/null 2>&1; then
- gcc_cv_as_offsetable_lo10=no
- else
- gcc_cv_as_offsetable_lo10=yes
- fi
- else
- gcc_cv_as_offsetable_lo10=no
- fi
- rm -f conftest.s conftest.o conftest1.s conftest1.o
- fi
-
+ gcc_cv_as_sparc_offsetable_lo10=no
+ if test x$gcc_cv_as != x; then
+ echo '.text
+ or %g1, %lo(ab) + 12, %g1
+ or %g1, %lo(ab + 12), %g1' > conftest.s
+ if { ac_try='$gcc_cv_as -xarch=v9 -o conftest.o conftest.s >&5'; { (eval echo configure:6846: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ if test x$gcc_cv_objdump != x \
+ && %gcc_cv_objdump -s -j .text conftest.o 2> /dev/null \
+ | grep ' 82106000 82106000' > /dev/null 2>&1; then
+ gcc_cv_as_offsetable_lo10=yes
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-echo "$ac_t""$gcc_cv_as_offsetable_lo10" 1>&6
- if test "x$gcc_cv_as_offsetable_lo10" = xyes; then
- cat >> confdefs.h <<\EOF
+echo "$ac_t""$gcc_cv_as_sparc_offsetable_lo10" 1>&6
+if test $gcc_cv_as_sparc_offsetable_lo10 = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_OFFSETABLE_LO10 1
EOF
- fi
-
+fi
;;
i[34567]86-*-* | x86_64-*-*)
- echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:6834: checking assembler instructions" >&5
- gcc_cv_as_instructions=
- if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 9 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
-
-
- gcc_cv_as_instructions="filds fists"
-
-
+ echo $ac_n "checking assembler for filds and fists mnemonics""... $ac_c" 1>&6
+echo "configure:6872: checking assembler for filds and fists mnemonics" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_ix86_filds_fists'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_ix86_filds_fists=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 9 \) \* 1000 + 0`
+ then gcc_cv_as_ix86_filds_fists=yes
fi
-
- elif test x$gcc_cv_as != x; then
- set "filds fists" "filds mem; fists mem"
- while test $# -gt 0
- do
- echo "$2" > conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_instructions=${gcc_cv_as_instructions}$1" "
- fi
- shift 2
- done
- rm -f conftest.s conftest.o
- fi
- if test x"$gcc_cv_as_instructions" != x; then
- cat >> confdefs.h <<EOF
-#define HAVE_GAS_`echo "$gcc_cv_as_instructions" | sed -e 's/ $//' | tr 'a-z ' 'A-Z_'` 1
-EOF
-
+ elif test x$gcc_cv_as != x; then
+ echo 'filds mem; fists mem' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6883: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_ix86_filds_fists=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
fi
- echo "$ac_t""$gcc_cv_as_instructions" 1>&6
-
- echo $ac_n "checking assembler GOTOFF in data directives""... $ac_c" 1>&6
-echo "configure:6868: checking assembler GOTOFF in data directives" >&5
- gcc_cv_as_gotoff_in_data=no
- if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 11 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
-
+ rm -f conftest.o conftest.s
+ fi
+fi
- gcc_cv_as_gotoff_in_data=yes
-
+echo "$ac_t""$gcc_cv_as_ix86_filds_fists" 1>&6
+if test $gcc_cv_as_ix86_filds_fists = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_GAS_FILDS_FISTS 1
+EOF
fi
- elif test x$gcc_cv_as != x; then
- cat > conftest.s <<EOF
- .text
+ echo $ac_n "checking assembler for GOTOFF in data""... $ac_c" 1>&6
+echo "configure:6903: checking assembler for GOTOFF in data" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_ix86_gotoff_in_data'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_ix86_gotoff_in_data=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 11 \) \* 1000 + 0`
+ then gcc_cv_as_ix86_gotoff_in_data=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo ' .text
.L0:
nop
.data
- .long .L0@GOTOFF
-EOF
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_gotoff_in_data=yes
- fi
+ .long .L0@GOTOFF' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6918: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_ix86_gotoff_in_data=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
fi
- cat >> confdefs.h <<EOF
+ rm -f conftest.o conftest.s
+ fi
+fi
+
+echo "$ac_t""$gcc_cv_as_ix86_gotoff_in_data" 1>&6
+if test $gcc_cv_as_ix86_gotoff_in_data = yes; then
+ cat >> confdefs.h <<EOF
#define HAVE_AS_GOTOFF_IN_DATA `if test $gcc_cv_as_gotoff_in_data = yes; then echo 1; else echo 0; fi`
EOF
- echo "$ac_t""$gcc_cv_as_gotoff_in_data" 1>&6
+fi
;;
ia64*-*-*)
- echo $ac_n "checking assembler supports ltoffx and ldxmov""... $ac_c" 1>&6
-echo "configure:6902: checking assembler supports ltoffx and ldxmov" >&5
-if eval "test \"`echo '$''{'gcc_cv_as_ltoffx_ldxmov_relocs'+set}'`\" = set"; then
+ echo $ac_n "checking assembler for ltoffx and ldxmov relocs""... $ac_c" 1>&6
+echo "configure:6940: checking assembler for ltoffx and ldxmov relocs" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_ia64_ltoffx_ldxmov_relocs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
-
- gcc_cv_as_ltoffx_ldxmov_relocs=unknown
- if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 14 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
-
-
- gcc_cv_as_ltoffx_ldxmov_relocs=yes
-
-
+ gcc_cv_as_ia64_ltoffx_ldxmov_relocs=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 14 \) \* 1000 + 0`
+ then gcc_cv_as_ia64_ltoffx_ldxmov_relocs=yes
fi
-
- elif test x$gcc_cv_as != x; then
- cat > conftest.s << 'EOF'
- .text
+ elif test x$gcc_cv_as != x; then
+ echo ' .text
addl r15 = @ltoffx(x#), gp
;;
- ld8.mov r16 = [r15], x#
-EOF
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_ltoffx_ldxmov_relocs=yes
- else
- gcc_cv_as_ltoffx_ldxmov_relocs=no
- fi
- rm -f conftest.s conftest.o
- fi
-
-fi
-
-echo "$ac_t""$gcc_cv_as_ltoffx_ldxmov_relocs" 1>&6
- if test "x$gcc_cv_as_ltoffx_ldxmov_relocs" = xyes; then
- cat >> confdefs.h <<\EOF
+ ld8.mov r16 = r15, x#' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6954: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_LTOFFX_LDXMOV_RELOCS 1
EOF
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+
+echo "$ac_t""$gcc_cv_as_ia64_ltoffx_ldxmov_relocs" 1>&6
+
+
;;
+
powerpc*-*-*)
- echo $ac_n "checking assembler supports mfcr field""... $ac_c" 1>&6
-echo "configure:6946: checking assembler supports mfcr field" >&5
-if eval "test \"`echo '$''{'gcc_cv_as_mfcrf'+set}'`\" = set"; then
+ case $target in
+ *-*-aix) conftest_s=' .csect .textPR';;
+ *) conftest_s=' .text';;
+ esac
+ conftest_s="$conftest_s
+ mfcr 3,128"
+
+ echo $ac_n "checking assembler for mfcr field support""... $ac_c" 1>&6
+echo "configure:6982: checking assembler for mfcr field support" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_powerpc_mfcrf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
-
- gcc_cv_as_mfcrf=unknown
- if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 14 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
-
-
- gcc_cv_as_mfcrf=yes
-
-
+ gcc_cv_as_powerpc_mfcrf=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 14 \) \* 1000 + 0`
+ then gcc_cv_as_powerpc_mfcrf=yes
fi
-
- elif test x$gcc_cv_as != x; then
- cat > conftest.s << 'EOF'
- case "$target" in
- *-*-aix*)
- .csect .text[PR]
- ;;
- *)
- .text
- ;;
- esac
- mfcr 3,128
-EOF
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_mfcrf=yes
- else
- gcc_cv_as_mfcrf=no
- fi
- rm -f conftest.s conftest.o
- fi
-
+ elif test x$gcc_cv_as != x; then
+ echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6993: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_powerpc_mfcrf=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-echo "$ac_t""$gcc_cv_as_mfcrf" 1>&6
- if test "x$gcc_cv_as_mfcrf" = xyes; then
- cat >> confdefs.h <<\EOF
+echo "$ac_t""$gcc_cv_as_powerpc_mfcrf" 1>&6
+if test $gcc_cv_as_powerpc_mfcrf = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_MFCRF 1
EOF
+fi
+ ;;
+
+ mips*-*-*)
+ echo $ac_n "checking assembler for explicit relocation support""... $ac_c" 1>&6
+echo "configure:7015: checking assembler for explicit relocation support" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_mips_explicit_relocs'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_mips_explicit_relocs=no
+ if test $in_tree_gas = yes; then
+ if test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 14 \) \* 1000 + 0`
+ then gcc_cv_as_mips_explicit_relocs=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo ' lw $4,%gp_rel(foo)($4)' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7026: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_mips_explicit_relocs=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+
+echo "$ac_t""$gcc_cv_as_mips_explicit_relocs" 1>&6
+if test $gcc_cv_as_mips_explicit_relocs = yes; then
+ if test x$target_cpu_default = x
+ then target_cpu_default=MASK_EXPLICIT_RELOCS
+ else target_cpu_default="($target_cpu_default)|MASK_EXPLICIT_RELOCS"
+ fi
+fi
+
;;
esac
-
-echo $ac_n "checking assembler dwarf2 debug_line support""... $ac_c" 1>&6
-echo "configure:6996: checking assembler dwarf2 debug_line support" >&5
-gcc_cv_as_dwarf2_debug_line=no
# ??? Not all targets support dwarf2 debug_line, even within a version
# of gas. Moreover, we need to emit a valid instruction to trigger any
# info to the output file. So, as supported targets are added to gas 2.11,
mmix-*-*)
insn="swym 0"
;;
- esac
-if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 11 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
+esac
+if test x"$insn" != x; then
+ conftest_s="\
+ .file 1 \"conftest.s\"
+ .loc 1 3 0
+ $insn"
+ echo $ac_n "checking assembler for dwarf2 debug_line support""... $ac_c" 1>&6
+echo "configure:7072: checking assembler for dwarf2 debug_line support" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_dwarf2_debug_line'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_dwarf2_debug_line=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 11 \) \* 1000 + 0`
+ then gcc_cv_as_dwarf2_debug_line=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo "$conftest_s" > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7084: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ # ??? This fails with non-gnu grep. Maybe use objdump?
+ if grep debug_line conftest.o > /dev/null 2>&1; then
+ gcc_cv_as_dwarf2_debug_line=yes
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+echo "$ac_t""$gcc_cv_as_dwarf2_debug_line" 1>&6
- test $in_tree_gas_is_elf = yes && test x"$insn" != x \
- && gcc_cv_as_dwarf2_debug_line="yes"
-
+# The .debug_line file table must be in the exact order that
+# we specified the files, since these indices are also used
+# by DW_AT_decl_file. Approximate this test by testing if
+# the assembler bitches if the same index is assigned twice.
+ echo $ac_n "checking assembler for buggy dwarf2 .file directive""... $ac_c" 1>&6
+echo "configure:7106: checking assembler for buggy dwarf2 .file directive" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_dwarf2_file_buggy'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_dwarf2_file_buggy=no
+ if test x$gcc_cv_as != x; then
+ echo ' .file 1 "foo.s"
+ .file 1 "bar.s"' > conftest.s
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7114: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_dwarf2_file_buggy=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-elif test x$gcc_cv_as != x -a x"$insn" != x ; then
- echo ' .file 1 "conftest.s"' > conftest.s
- echo ' .loc 1 3 0' >> conftest.s
- echo " $insn" >> conftest.s
- # ??? This fails with non-gnu grep.
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1 \
- && grep debug_line conftest.o > /dev/null 2>&1 ; then
- # The .debug_line file table must be in the exact order that
- # we specified the files, since these indices are also used
- # by DW_AT_decl_file. Approximate this test by testing if
- # the assembler bitches if the same index is assigned twice.
- echo ' .file 1 "foo.s"' > conftest.s
- echo ' .file 1 "bar.s"' >> conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1
- then
- gcc_cv_as_dwarf2_debug_line="no"
- else
- gcc_cv_as_dwarf2_debug_line="yes"
- fi
- fi
- rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
-fi
-if test x"$gcc_cv_as_dwarf2_debug_line" = xyes; then
+echo "$ac_t""$gcc_cv_as_dwarf2_file_buggy" 1>&6
+
+
+ if test $gcc_cv_as_dwarf2_debug_line = yes \
+ && test $gcc_cv_as_dwarf2_file_buggy = no; then
cat >> confdefs.h <<\EOF
#define HAVE_AS_DWARF2_DEBUG_LINE 1
EOF
-fi
-echo "$ac_t""$gcc_cv_as_dwarf2_debug_line" 1>&6
-
-echo $ac_n "checking assembler --gdwarf2 support""... $ac_c" 1>&6
-echo "configure:7060: checking assembler --gdwarf2 support" >&5
-gcc_cv_as_gdwarf2_flag=no
-if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 11 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
-
-
- test $in_tree_gas_is_elf = yes && test x"$insn" != x \
- && gcc_cv_as_gdwarf2_flag="yes"
-
+ fi
+ echo $ac_n "checking assembler for --gdwarf2 option""... $ac_c" 1>&6
+echo "configure:7137: checking assembler for --gdwarf2 option" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_gdwarf2_flag'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_gdwarf2_flag=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 11 \) \* 1000 + 0`
+ then gcc_cv_as_gdwarf2_flag=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo "$insn" > conftest.s
+ if { ac_try='$gcc_cv_as --gdwarf2 -o conftest.o conftest.s >&5'; { (eval echo configure:7149: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ gcc_cv_as_gdwarf2_flag=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-elif test x$gcc_cv_as != x -a x"$insn" != x ; then
- echo '' > conftest.s
- # ??? This fails with non-gnu grep.
- if $gcc_cv_as --gdwarf2 -o conftest.o conftest.s > /dev/null 2>&1
- then
- gcc_cv_as_gdwarf2_flag="yes"
- fi
- rm -f conftest.s conftest.o
-fi
-if test x"$gcc_cv_as_gdwarf2_flag" = xyes; then
- cat >> confdefs.h <<\EOF
+echo "$ac_t""$gcc_cv_as_gdwarf2_flag" 1>&6
+if test $gcc_cv_as_gdwarf2_flag = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_GDWARF2_DEBUG_FLAG 1
EOF
fi
-echo "$ac_t""$gcc_cv_as_gdwarf2_flag" 1>&6
-
-echo $ac_n "checking assembler --gstabs support""... $ac_c" 1>&6
-echo "configure:7092: checking assembler --gstabs support" >&5
-gcc_cv_as_gstabs_flag=no
-if test $in_tree_gas = yes ; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 11 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
-
-
- test $in_tree_gas_is_elf = yes && test x"$insn" != x \
- && gcc_cv_as_gstabs_flag="yes"
-
+ echo $ac_n "checking assembler for --gstabs option""... $ac_c" 1>&6
+echo "configure:7169: checking assembler for --gstabs option" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_gstabs_flag'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ gcc_cv_as_gstabs_flag=no
+ if test $in_tree_gas = yes; then
+ if test $in_tree_gas_is_elf = yes \
+ && test $gcc_cv_gas_vers -ge `expr \( \( 2 \* 1000 \) + 11 \) \* 1000 + 0`
+ then gcc_cv_as_gstabs_flag=yes
+fi
+ elif test x$gcc_cv_as != x; then
+ echo "$insn" > conftest.s
+ if { ac_try='$gcc_cv_as --gstabs -o conftest.o conftest.s >&5'; { (eval echo configure:7181: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then
+ # The native Solaris 9/Intel assembler doesn't understand --gstabs
+ # and warns about it, but still exits successfully. So check for
+ # this.
+ if { ac_try='$gcc_cv_as --gstabs -o conftest.o conftest.s 2>&1 | grep -i warning > /dev/null'; { (eval echo configure:7186: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ then :
+ else gcc_cv_as_gstabs_flag=yes
+ fi
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
fi
-elif test x$gcc_cv_as != x -a x"$insn" != x ; then
- echo '' > conftest.s
- # ??? This fails with non-gnu grep.
- if $gcc_cv_as --gstabs -o conftest.o conftest.s > /dev/null 2>&1 ; then
- gcc_cv_as_gstabs_flag="yes"
- # The native Solaris 9/Intel assembler doesn't understand --gstabs
- # and warns about it, but still exits successfully. So check for
- # this.
- if $gcc_cv_as --gstabs -o conftest.o conftest.s 2>&1 | \
- grep -i warning > /dev/null ; then
- gcc_cv_as_gstabs_flag="no"
- fi
- fi
- rm -f conftest.s conftest.o
-fi
-if test x"$gcc_cv_as_gstabs_flag" = xyes; then
- cat >> confdefs.h <<\EOF
+echo "$ac_t""$gcc_cv_as_gstabs_flag" 1>&6
+if test $gcc_cv_as_gstabs_flag = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_GSTABS_DEBUG_FLAG 1
EOF
fi
-echo "$ac_t""$gcc_cv_as_gstabs_flag" 1>&6
+fi
echo $ac_n "checking linker read-only and read-write section mixing""... $ac_c" 1>&6
-echo "configure:7130: checking linker read-only and read-write section mixing" >&5
+echo "configure:7208: checking linker read-only and read-write section mixing" >&5
gcc_cv_ld_ro_rw_mix=unknown
if test $in_tree_ld = yes ; then
if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 10 -o "$gcc_cv_gld_major_version" -gt 2 \
echo "$ac_t""$gcc_cv_ld_ro_rw_mix" 1>&6
echo $ac_n "checking linker PT_GNU_EH_FRAME support""... $ac_c" 1>&6
-echo "configure:7169: checking linker PT_GNU_EH_FRAME support" >&5
+echo "configure:7247: checking linker PT_GNU_EH_FRAME support" >&5
gcc_cv_ld_eh_frame_hdr=no
if test $in_tree_ld = yes ; then
if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 12 -o "$gcc_cv_gld_major_version" -gt 2 \
echo "$ac_t""$gcc_cv_ld_eh_frame_hdr" 1>&6
echo $ac_n "checking linker position independent executable support""... $ac_c" 1>&6
-echo "configure:7191: checking linker position independent executable support" >&5
+echo "configure:7269: checking linker position independent executable support" >&5
gcc_cv_ld_pie=no
if test $in_tree_ld = yes ; then
if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 15 -o "$gcc_cv_gld_major_version" -gt 2 \
case "$target" in
mips*-*-*)
echo $ac_n "checking whether libgloss uses STARTUP directives consistently""... $ac_c" 1>&6
-echo "configure:7216: checking whether libgloss uses STARTUP directives consistently" >&5
+echo "configure:7294: checking whether libgloss uses STARTUP directives consistently" >&5
gcc_cv_mips_libgloss_startup=no
gcc_cv_libgloss_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/libgloss
if test "x$exec_prefix" = xNONE; then
fi
echo "$ac_t""$gcc_cv_mips_libgloss_startup" 1>&6
-
- echo $ac_n "checking whether the assembler has explicit relocation support""... $ac_c" 1>&6
-echo "configure:7244: checking whether the assembler has explicit relocation support" >&5
- if test x$gcc_cv_mips_explicit_relocs = x; then
- gcc_cv_mips_explicit_relocs=no
- if test $in_tree_gas = yes; then
- if test $gcc_cv_gas_major_version -eq 2 \
-&& test $gcc_cv_gas_minor_version -ge 14 \
-|| test $gcc_cv_gas_major_version -gt 2 ; then
-
-
- gcc_cv_mips_explicit_relocs=yes
-
-
-fi
-
- elif test x$gcc_cv_as != x; then
- echo ' lw $4,%gp_rel(foo)($4)' > conftest.s
- if $gcc_cv_as conftest.s -o conftest.o > /dev/null 2>&1; then
- gcc_cv_mips_explicit_relocs=yes
- fi
- rm -f conftest.s conftest.o
- fi
- fi
- if test $gcc_cv_mips_explicit_relocs = yes; then
- test x$target_cpu_default != x || target_cpu_default=0
- target_cpu_default="(${target_cpu_default}|MASK_EXPLICIT_RELOCS)"
- fi
- echo "$ac_t""$gcc_cv_mips_explicit_relocs" 1>&6
;;
esac
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:7450: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7499: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
fi
fi
-AC_CHECK_TYPE(ssize_t, int)
+gcc_AC_CHECK_TYPE(ssize_t, int)
# Try to determine the array type of the second argument of getgroups
# for the target system (int or gid_t).
esac
# Figure out what assembler alignment features are present.
-AC_MSG_CHECKING(assembler alignment features)
-gcc_cv_as_alignment_features=none
-if test $in_tree_gas = yes; then
- # Gas version 2.6 and later support for .balign and .p2align.
- gcc_GAS_VERSION_GTE_IFELSE(2,6,0,[
- gcc_cv_as_alignment_features=".balign and .p2align"
- AC_DEFINE(HAVE_GAS_BALIGN_AND_P2ALIGN)
- ])
- # Gas version 2.8 and later support specifying the maximum
- # bytes to skip when using .p2align.
- gcc_GAS_VERSION_GTE_IFELSE(2,8,0,[
- gcc_cv_as_alignment_features=".p2align including maximum skip"
- AC_DEFINE(HAVE_GAS_MAX_SKIP_P2ALIGN)
- ])
-elif test x$gcc_cv_as != x; then
- # Check if we have .balign and .p2align
- echo ".balign 4" > conftest.s
- echo ".p2align 2" >> conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_alignment_features=".balign and .p2align"
- AC_DEFINE(HAVE_GAS_BALIGN_AND_P2ALIGN)
- fi
- rm -f conftest.s conftest.o
- # Check if specifying the maximum bytes to skip when
- # using .p2align is supported.
- echo ".p2align 4,,7" > conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_alignment_features=".p2align including maximum skip"
- AC_DEFINE(HAVE_GAS_MAX_SKIP_P2ALIGN)
- fi
- rm -f conftest.s conftest.o
-fi
-AC_MSG_RESULT($gcc_cv_as_alignment_features)
-
-AC_MSG_CHECKING(assembler subsection support)
-gcc_cv_as_subsections=no
-if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,9,0,[
- test $in_tree_gas_is_elf = yes \
- && gcc_cv_as_subsections="working .subsection -1"
- ])
-elif test x$gcc_cv_as != x; then
- # Check if we have .subsection
- echo ".subsection 1" > conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_subsections=".subsection"
- if test x$gcc_cv_nm != x; then
- cat > conftest.s <<EOF
-conftest_label1: .word 0
+gcc_GAS_CHECK_FEATURE([.balign and .p2align], gcc_cv_as_balign_and_p2align,
+ [2,6,0],,
+[.balign 4
+.p2align 2],,
+[AC_DEFINE(HAVE_GAS_BALIGN_AND_P2ALIGN, 1,
+ [Define if your assembler supports .balign and .p2align.])])
+
+gcc_GAS_CHECK_FEATURE([.p2align with maximum skip], gcc_cv_as_max_skip_p2align,
+ [2,8,0],,
+ [.p2align 4,,7],,
+[AC_DEFINE(HAVE_GAS_MAX_SKIP_P2ALIGN, 1,
+ [Define if your assembler supports specifying the maximum number
+ of bytes to skip when using the GAS .p2align command.])])
+
+gcc_GAS_CHECK_FEATURE([working .subsection -1], gcc_cv_as_subsection_m1,
+ [elf,2,9,0],,
+ [conftest_label1: .word 0
.subsection -1
conftest_label2: .word 0
-.previous
-EOF
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- $gcc_cv_nm conftest.o | grep conftest_label1 > conftest.nm1
- $gcc_cv_nm conftest.o | grep conftest_label2 | sed -e 's/label2/label1/' > conftest.nm2
- if cmp conftest.nm1 conftest.nm2 > /dev/null 2>&1; then
- :
- else
- gcc_cv_as_subsections="working .subsection -1"
- fi
- fi
- fi
- fi
- rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
-fi
-if test x"$gcc_cv_as_subsections" = x"working .subsection -1"; then
- AC_DEFINE(HAVE_GAS_SUBSECTION_ORDERING, 1,
-[Define if your assembler supports .subsection and .subsection -1 starts
- emitting at the beginning of your section.])
-fi
-AC_MSG_RESULT($gcc_cv_as_subsections)
-
-AC_MSG_CHECKING(assembler weak support)
-gcc_cv_as_weak=no
-if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,2,0,[
- gcc_cv_as_weak="yes"
- ])
-elif test x$gcc_cv_as != x; then
- # Check if we have .weak
- echo " .weak foobar" > conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_weak="yes"
- fi
- rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
-fi
-if test x"$gcc_cv_as_weak" = xyes; then
- AC_DEFINE(HAVE_GAS_WEAK, 1, [Define if your assembler supports .weak.])
-fi
-AC_MSG_RESULT($gcc_cv_as_weak)
-
-AC_MSG_CHECKING(assembler hidden support)
-gcc_cv_as_hidden=no
-if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,12,1,[
- test $in_tree_gas_is_elf = yes && gcc_cv_as_hidden="yes"
- ])
-elif test x$gcc_cv_as != x; then
- # Check if we have .hidden
- echo " .hidden foobar" > conftest.s
- echo "foobar:" >> conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_hidden="yes"
- fi
- rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
-
- # GNU LD versions before 2.12.1 have buggy support for STV_HIDDEN.
- # This is irritatingly difficult to feature test for. Look for
- # the date string after the version number.
- ld_ver=`$gcc_cv_ld --version 2>/dev/null | head -1`
- if echo "$ld_ver" | grep GNU > /dev/null; then
+.previous],
+ [if test x$gcc_cv_nm != x; then
+ $gcc_cv_nm conftest.o | grep conftest_label1 > conftest.nm1
+ $gcc_cv_nm conftest.o | grep conftest_label2 | sed -e 's/label2/label1/' > conftest.nm2
+ if cmp conftest.nm1 conftest.nm2 > /dev/null 2>&1
+ then :
+ else gcc_cv_as_subsection_m1=yes
+ fi
+ rm -f conftest.nm1 conftest.nm2
+ fi],
+ [AC_DEFINE(HAVE_GAS_SUBSECTION_ORDERING, 1,
+ [Define if your assembler supports .subsection and .subsection -1 starts
+ emitting at the beginning of your section.])])
+
+gcc_GAS_CHECK_FEATURE([.weak], gcc_cv_as_weak,
+ [2,2,0],,
+ [ .weak foobar],,
+[AC_DEFINE(HAVE_GAS_WEAK, 1, [Define if your assembler supports .weak.])])
+
+# .hidden needs to be supported in both the assembler and the linker,
+# because GNU LD versions before 2.12.1 have buggy support for STV_HIDDEN.
+# This is irritatingly difficult to feature test for; we have to check the
+# date string after the version number. If we've got an in-tree
+# ld, we don't know its patchlevel version, so we set the baseline at 2.13
+# to be safe.
+# The gcc_GAS_CHECK_FEATURE call just sets a cache variable.
+gcc_GAS_CHECK_FEATURE([.hidden], gcc_cv_as_hidden,
+ [elf,2,13,0],,
+[ .hidden foobar
+foobar:])
+
+AC_CACHE_CHECK(linker for .hidden support, gcc_cv_ld_hidden,
+[if test $in_tree_ld = yes ; then
+ gcc_cv_ld_hidden=no
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 13 -o "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_hidden=yes
+ fi
+else
+ gcc_cv_ld_hidden=yes
+ ld_ver=`$gcc_cv_ld --version 2>/dev/null | head -1`
+ if echo "$ld_ver" | grep GNU > /dev/null; then
changequote(,)dnl
- ld_vers=`echo $ld_ver | sed -n \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p' \
- -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p'`
- ld_date=`echo $ld_ver | sed -n 's,^.*\([2-9][0-9][0-9][0-9]\)[-]*\([01][0-9]\)[-]*\([0-3][0-9]\).*$,\1\2\3,p'`
- if test 0"$ld_date" -lt 20020404; then
- if test -n "$ld_date"; then
- # If there was date string, but was earlier than 2002-04-04, fail
- gcc_cv_as_hidden="no"
- elif test -z "$ld_vers"; then
- # If there was no date string nor ld version number, something is wrong
- gcc_cv_as_hidden="no"
- else
- ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
- ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
- ld_vers_patch=`expr "$ld_vers" : '[0-9]*\.[0-9]*\.\([0-9]*\)'`
- test -z "$ld_vers_patch" && ld_vers_patch=0
- if test "$ld_vers_major" -lt 2; then
- gcc_cv_as_hidden="no"
- elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 12; then
- gcc_cv_as_hidden="no"
- elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -eq 12 \
- -a "$ld_vers_patch" -eq 0; then
- gcc_cv_as_hidden="no"
- fi
- fi
- fi
-changequote([,])dnl
+ ld_vers=`echo $ld_ver | sed -n \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)$,\1,p' \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p' \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p' \
+ -e 's,^.*[ ]\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\)[ ].*$,\1,p'`
+ ld_date=`echo $ld_ver | sed -n 's,^.*\([2-9][0-9][0-9][0-9]\)[-]*\([01][0-9]\)[-]*\([0-3][0-9]\).*$,\1\2\3,p'`
+ if test 0"$ld_date" -lt 20020404; then
+ if test -n "$ld_date"; then
+ # If there was date string, but was earlier than 2002-04-04, fail
+ gcc_cv_ld_hidden=no
+ elif test -z "$ld_vers"; then
+ # If there was no date string nor ld version number, something is wrong
+ gcc_cv_ld_hidden=no
+ else
+ ld_vers_major=`expr "$ld_vers" : '\([0-9]*\)'`
+ ld_vers_minor=`expr "$ld_vers" : '[0-9]*\.\([0-9]*\)'`
+ ld_vers_patch=`expr "$ld_vers" : '[0-9]*\.[0-9]*\.\([0-9]*\)'`
+ test -z "$ld_vers_patch" && ld_vers_patch=0
+ if test "$ld_vers_major" -lt 2; then
+ gcc_cv_ld_hidden=no
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -lt 12; then
+ gcc_cv_ld_hidden="no"
+ elif test "$ld_vers_major" -eq 2 -a "$ld_vers_minor" -eq 12 -a "$ld_vers_patch" -eq 0; then
+ gcc_cv_ld_hidden=no
fi
-fi
-case "$target" in
- mips-sgi-irix6*)
- if test x"$gnu_ld_flag" = x"no"; then
- # Even if using gas with .hidden support, the resulting object files
- # cannot be linked with the IRIX 6 O32 linker. With the N32 and
- # N64 linkers, the problem is that the linker refuses to accept
- # -call_shared (passed by default to the linker) and -r (used to
- # link the object file generated without .hidden directives with
- # one that hides symbols), so we also lose.
- gcc_cv_as_hidden=no
+ fi
+changequote([,])dnl
fi
- ;;
-esac
-if test x"$gcc_cv_as_hidden" = xyes; then
- AC_DEFINE(HAVE_GAS_HIDDEN, 1,
- [Define if your assembler supports .hidden.])
-fi
-AC_MSG_RESULT($gcc_cv_as_hidden)
-libgcc_visibility=$gcc_cv_as_hidden
+ else
+ case "$target" in
+ mips-sgi-irix6*)
+ if test x"$gnu_ld_flag" = x"no"; then
+ # Even if using gas with .hidden support, the resulting object files
+ # cannot be linked with the IRIX 6 O32 linker. With the N32 and
+ # N64 linkers, the problem is that the linker refuses to accept
+ # -call_shared (passed by default to the linker) and -r (used to
+ # link the object file generated without .hidden directives with
+ # one that hides symbols), so we also lose.
+ gcc_cv_ld_hidden=no
+ fi
+ ;;
+ esac
+ fi
+fi])
+libgcc_visibility=no
AC_SUBST(libgcc_visibility)
+if test $gcc_cv_as_hidden = yes && test $gcc_cv_ld_hidden=yes; then
+ libgcc_visibility=yes
+ AC_DEFINE(HAVE_GAS_HIDDEN, 1,
+ [Define if your assembler and linker support .hidden.])
+fi
-AC_MSG_CHECKING(assembler leb128 support)
-gcc_cv_as_leb128=no
-if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,11,0,[
- test $in_tree_gas_is_elf = yes && gcc_cv_as_leb128="yes"
- ])
-elif test x$gcc_cv_as != x; then
- # Check if we have .[us]leb128, and support symbol arithmetic with it.
- cat > conftest.s <<EOF
- .data
+# Check if we have .[us]leb128, and support symbol arithmetic with it.
+gcc_GAS_CHECK_FEATURE([.sleb128 and .uleb128], gcc_cv_as_leb128,
+ [elf,2,11,0],,
+[ .data
.uleb128 L2 - L1
L1:
.uleb128 1280
.sleb128 -1010
-L2:
-EOF
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_leb128="yes"
-
- # GAS versions before 2.11 do not support uleb128,
- # despite appearing to.
- # ??? There exists an elf-specific test that will crash
- # the assembler. Perhaps it's better to figure out whether
- # arbitrary sections are supported and try the test.
- as_ver=`$gcc_cv_as --version 2>/dev/null | head -1`
- if echo "$as_ver" | grep GNU > /dev/null; then
+L2:],
+ [# GAS versions before 2.11 do not support uleb128,
+ # despite appearing to.
+ # ??? There exists an elf-specific test that will crash
+ # the assembler. Perhaps it's better to figure out whether
+ # arbitrary sections are supported and try the test.
+ as_ver=`$gcc_cv_as --version 2>/dev/null | head -1`
+ if echo "$as_ver" | grep GNU > /dev/null; then
changequote(,)dnl
- as_ver=`echo $as_ver | sed -e 's/GNU assembler \([0-9.][0-9.]*\).*/\1/'`
- as_major=`echo $as_ver | sed 's/\..*//'`
- as_minor=`echo $as_ver | sed 's/[^.]*\.\([0-9]*\).*/\1/'`
+ as_ver=`echo $as_ver | sed -e 's/GNU assembler \([0-9.][0-9.]*\).*/\1/'`
+ as_major=`echo $as_ver | sed 's/\..*//'`
+ as_minor=`echo $as_ver | sed 's/[^.]*\.\([0-9]*\).*/\1/'`
changequote([,])dnl
- if test $as_major -eq 2 -a $as_minor -lt 11; then
- gcc_cv_as_leb128="no"
- fi
- fi
- fi
- rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
-fi
-if test x"$gcc_cv_as_leb128" = xyes; then
- AC_DEFINE(HAVE_AS_LEB128, 1,
- [Define if your assembler supports .uleb128.])
-fi
-AC_MSG_RESULT($gcc_cv_as_leb128)
-
-AC_MSG_CHECKING(assembler eh_frame optimization)
-gcc_cv_as_eh_frame=no
-if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,12,0,[
- test $in_tree_gas_is_elf = yes && gcc_cv_as_eh_frame="yes"
- ])
-elif test x$gcc_cv_as != x; then
- # Check if this is GAS.
- as_ver=`$gcc_cv_as --version < /dev/null 2> /dev/null | head -1`
- rm -f a.out 2> /dev/null
- if echo "$as_ver" | grep GNU > /dev/null; then
- # Versions up to and including 2.11.0 may mis-optimize
- # .eh_frame data. Try something.
- cat > conftest.s <<EOF
- .text
+ if test $as_major -eq 2 && test $as_minor -lt 11
+ then :
+ else gcc_cv_as_leb128=yes
+ fi
+ fi],
+ [AC_DEFINE(HAVE_AS_LEB128, 1,
+ [Define if your assembler supports .sleb128 and .uleb128.])])
+
+# GAS versions up to and including 2.11.0 may mis-optimize
+# .eh_frame data.
+gcc_GAS_CHECK_FEATURE(eh_frame optimization, gcc_cv_as_eh_frame,
+ [elf,2,12,0],,
+[ .text
.LFB1:
.4byte 0
.L1:
.4byte .LFE1-.LFB1
.byte 0x4
.4byte .L1-.LFB1
-.LEFDE1:
-EOF
- cat > conftest.lit <<EOF
+.LEFDE1:],
+[ cat > conftest.lit <<EOF
0000 10000000 00000000 017a0001 781a0004 .........z..x...
0010 01000000 12000000 18000000 00000000 ................
0020 08000000 04080000 0044 .........D
EOF
- cat > conftest.big <<EOF
+ cat > conftest.big <<EOF
0000 00000010 00000000 017a0001 781a0004 .........z..x...
0010 00000001 00000012 00000018 00000000 ................
0020 00000008 04000000 0844 .........D
EOF
- # If the assembler didn't choke, and we can objdump,
- # and we got the correct data, then succeed.
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1 \
- && $gcc_cv_objdump -s -j .eh_frame conftest.o 2>/dev/null \
- | tail -3 > conftest.got \
- && { cmp conftest.lit conftest.got > /dev/null 2>&1 \
- || cmp conftest.big conftest.got > /dev/null 2>&1; }
- then
- gcc_cv_as_eh_frame="yes"
- else
- gcc_cv_as_eh_frame="bad"
- if $gcc_cv_as -o conftest.o --traditional-format /dev/null; then
- AC_DEFINE(USE_AS_TRADITIONAL_FORMAT, 1,
- [Define if your assembler mis-optimizes .eh_frame data.])
- fi
- fi
- fi
- rm -f conftest.*
-fi
-AC_MSG_RESULT($gcc_cv_as_eh_frame)
-
-AC_MSG_CHECKING(assembler section merging support)
-gcc_cv_as_shf_merge=no
-if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,12,0,[
- test $in_tree_gas_is_elf = yes && gcc_cv_as_shf_merge="yes"
- ])
-elif test x$gcc_cv_as != x; then
- # Check if we support SHF_MERGE sections
- echo '.section .rodata.str, "aMS", @progbits, 1' > conftest.s
- if $gcc_cv_as --fatal-warnings -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_shf_merge=yes
- fi
- rm -f conftest.s conftest.o
-fi
-if test x"$gcc_cv_as_shf_merge" = xyes; then
- AC_DEFINE(HAVE_GAS_SHF_MERGE, 1,
-[Define if your assembler supports marking sections with SHF_MERGE flag.])
+ # If the assembler didn't choke, and we can objdump,
+ # and we got the correct data, then succeed.
+ if test x$gcc_cv_objdump != x \
+ && $gcc_cv_objdump -s -j .eh_frame conftest.o 2>/dev/null \
+ | tail -3 > conftest.got \
+ && { cmp conftest.lit conftest.got > /dev/null 2>&1 \
+ || cmp conftest.big conftest.got > /dev/null 2>&1; }
+ then
+ gcc_cv_as_eh_frame=yes
+ elif AC_TRY_COMMAND($gcc_cv_as -o conftest.o --traditional-format /dev/null); then
+ gcc_cv_as_eh_frame=buggy
+ else
+ # Uh oh, what do we do now?
+ gcc_cv_as_eh_frame=no
+ fi])
+
+if test $gcc_cv_as_eh_frame = buggy; then
+ AC_DEFINE(USE_AS_TRADITIONAL_FORMAT, 1,
+ [Define if your assembler mis-optimizes .eh_frame data.])
fi
-AC_MSG_RESULT($gcc_cv_as_shf_merge)
-AC_MSG_CHECKING(assembler thread-local storage support)
-gcc_cv_as_tls=no
+gcc_GAS_CHECK_FEATURE(section merging support, gcc_cv_as_shf_merge,
+ [elf,2,12,0], [--fatal-warnings],
+ [.section .rodata.str, "aMS", @progbits, 1],,
+ [AC_DEFINE(HAVE_GAS_SHF_MERGE, 1,
+[Define if your assembler supports marking sections with SHF_MERGE flag.])])
+
+# Thread-local storage - the check is heavily parametrized.
conftest_s=
tls_first_major=
tls_first_minor=
;;
esac
if test -z "$tls_first_major"; then
- :
-elif test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE($tls_first_major,$tls_first_minor,0,[
- gcc_cv_as_tls=yes
- ])
-elif test x$gcc_cv_as != x; then
- echo "$conftest_s" > conftest.s
- if $gcc_cv_as $tls_as_opt --fatal-warnings -o conftest.o conftest.s > /dev/null 2>&1
- then
- gcc_cv_as_tls=yes
- fi
- rm -f conftest.s conftest.o
-fi
-if test "$gcc_cv_as_tls" = yes; then
- AC_DEFINE(HAVE_AS_TLS, 1,
- [Define if your assembler supports thread-local storage.])
+ : # If we don't have a check, assume no support.
+else
+ gcc_GAS_CHECK_FEATURE(thread-local storage support, gcc_cv_as_tls,
+ [$tls_first_major,$tls_first_minor,0], [$tls_as_opt --fatal-warnings],
+ [$conftest_s],,
+ [AC_DEFINE(HAVE_AS_TLS, 1,
+ [Define if your assembler supports thread-local storage.])])
fi
-AC_MSG_RESULT($gcc_cv_as_tls)
+
+# Target-specific assembler checks.
case "$target" in
# All TARGET_ABI_OSF targets.
alpha*-*-osf* | alpha*-*-linux* | alpha*-*-*bsd*)
- AC_CACHE_CHECK([assembler supports explicit relocations],
- gcc_cv_as_explicit_relocs, [
- gcc_cv_as_explicit_relocs=unknown
- if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,12,0,[
- gcc_cv_as_explicit_relocs=yes
- ])
- elif test x$gcc_cv_as != x; then
- cat > conftest.s << 'EOF'
- .set nomacro
+ gcc_GAS_CHECK_FEATURE([explicit relocation support],
+ gcc_cv_as_alpha_explicit_relocs, [2,12,0],,
+[ .set nomacro
.text
extbl $3, $2, $3 !lituse_bytoff!1
ldq $2, a($29) !literal!1
lda $0, c($29) !gprel
ldah $1, d($29) !gprelhigh
lda $1, d($1) !gprellow
- lda $29, 0($29) !gpdisp!3
-EOF
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_explicit_relocs=yes
- else
- gcc_cv_as_explicit_relocs=no
- fi
- rm -f conftest.s conftest.o
- fi
- ])
- if test "x$gcc_cv_as_explicit_relocs" = xyes; then
- AC_DEFINE(HAVE_AS_EXPLICIT_RELOCS, 1,
- [Define if your assembler supports explicit relocations.])
- fi
+ lda $29, 0($29) !gpdisp!3],,
+ [AC_DEFINE(HAVE_AS_EXPLICIT_RELOCS, 1,
+ [Define if your assembler supports explicit relocations.])])
;;
- sparc*-*-*)
- AC_CACHE_CHECK([assembler .register pseudo-op support],
- gcc_cv_as_register_pseudo_op, [
- gcc_cv_as_register_pseudo_op=unknown
- if test x$gcc_cv_as != x; then
- # Check if we have .register
- echo ".register %g2, #scratch" > conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_register_pseudo_op=yes
- else
- gcc_cv_as_register_pseudo_op=no
- fi
- rm -f conftest.s conftest.o
- fi
- ])
- if test "x$gcc_cv_as_register_pseudo_op" = xyes; then
- AC_DEFINE(HAVE_AS_REGISTER_PSEUDO_OP, 1,
- [Define if your assembler supports .register.])
- fi
-
- AC_CACHE_CHECK([assembler supports -relax],
- gcc_cv_as_relax_opt, [
- gcc_cv_as_relax_opt=unknown
- if test x$gcc_cv_as != x; then
- # Check if gas supports -relax
- echo ".text" > conftest.s
- if $gcc_cv_as -relax -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_relax_opt=yes
- else
- gcc_cv_as_relax_opt=no
- fi
- rm -f conftest.s conftest.o
- fi
- ])
- if test "x$gcc_cv_as_relax_opt" = xyes; then
- AC_DEFINE(HAVE_AS_RELAX_OPTION, 1,
- [Define if your assembler supports -relax option.])
- fi
- AC_CACHE_CHECK([assembler and linker support unaligned pc related relocs],
- gcc_cv_as_sparc_ua_pcrel, [
- gcc_cv_as_sparc_ua_pcrel=unknown
- if test x$gcc_cv_as != x -a x$gcc_cv_ld != x; then
- gcc_cv_as_sparc_ua_pcrel=no
- echo ".text; foo: nop; .data; .align 4; .byte 0; .uaword %r_disp32(foo)" > conftest.s
- if $gcc_cv_as -K PIC -o conftest.o conftest.s > /dev/null 2>&1 \
- && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
- gcc_cv_as_sparc_ua_pcrel=yes
- fi
- rm -f conftest.s conftest.o conftest
- fi
- ])
- if test "x$gcc_cv_as_sparc_ua_pcrel" = xyes; then
- AC_DEFINE(HAVE_AS_SPARC_UA_PCREL, 1,
+ sparc*-*-*)
+ gcc_GAS_CHECK_FEATURE([.register], gcc_cv_as_sparc_register_op,,,
+ [.register %g2, #scratch],,
+ [AC_DEFINE(HAVE_AS_REGISTER_PSEUDO_OP, 1,
+ [Define if your assembler supports .register.])])
+
+ gcc_GAS_CHECK_FEATURE([-relax option], gcc_cv_as_sparc_relax,,
+ [-relax], [.text],,
+ [AC_DEFINE(HAVE_AS_RELAX_OPTION, 1,
+ [Define if your assembler supports -relax option.])])
+
+ gcc_GAS_CHECK_FEATURE([unaligned pcrel relocs],
+ gcc_cv_as_sparc_ua_pcrel,,
+ [-K PIC],
+[.text
+foo:
+ nop
+.data
+.align 4
+.byte 0
+.uaword %r_disp32(foo)],
+ [if test x$gcc_cv_ld != x \
+ && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
+ gcc_cv_as_sparc_ua_pcrel=yes
+ fi
+ rm -f conftest],
+ [AC_DEFINE(HAVE_AS_SPARC_UA_PCREL, 1,
[Define if your assembler and linker support unaligned PC relative relocs.])
- fi
- AC_CACHE_CHECK([assembler and linker support unaligned pc related relocs against hidden symbols],
- gcc_cv_as_sparc_ua_pcrel_hidden, [
- if test "x$gcc_cv_as_sparc_ua_pcrel" = xyes; then
- gcc_cv_as_sparc_ua_pcrel_hidden=unknown
- if test x$gcc_cv_objdump != x; then
- gcc_cv_as_sparc_ua_pcrel_hidden=no
- echo ".data; .align 4; .byte 0x31; .uaword %r_disp32(foo)" > conftest.s
- echo ".byte 0x32, 0x33, 0x34; .global foo; .hidden foo" >> conftest.s
- echo "foo: .skip 4" >> conftest.s
- if $gcc_cv_as -K PIC -o conftest.o conftest.s > /dev/null 2>&1 \
- && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1 \
- && $gcc_cv_objdump -s -j .data conftest 2> /dev/null \
- | grep ' 31000000 07323334' > /dev/null 2>&1; then
- if $gcc_cv_objdump -R conftest 2> /dev/null \
- | grep 'DISP32' > /dev/null 2>&1; then
- :
- else
- gcc_cv_as_sparc_ua_pcrel_hidden=yes
- fi
- fi
- fi
- rm -f conftest.s conftest.o conftest
- else
- gcc_cv_as_sparc_ua_pcrel_hidden="$gcc_cv_as_sparc_ua_pcrel"
- fi
- ])
- if test "x$gcc_cv_as_sparc_ua_pcrel_hidden" = xyes; then
- AC_DEFINE(HAVE_AS_SPARC_UA_PCREL_HIDDEN, 1,
- [Define if your assembler and linker support unaligned PC relative relocs against hidden symbols.])
- fi
-
- AC_CACHE_CHECK([for assembler offsetable %lo() support],
- gcc_cv_as_offsetable_lo10, [
- gcc_cv_as_offsetable_lo10=unknown
- if test "x$gcc_cv_as" != x; then
- # Check if assembler has offsetable %lo()
- echo "or %g1, %lo(ab) + 12, %g1" > conftest.s
- echo "or %g1, %lo(ab + 12), %g1" > conftest1.s
- if $gcc_cv_as -xarch=v9 -o conftest.o conftest.s \
- > /dev/null 2>&1 &&
- $gcc_cv_as -xarch=v9 -o conftest1.o conftest1.s \
- > /dev/null 2>&1; then
- if cmp conftest.o conftest1.o > /dev/null 2>&1; then
- gcc_cv_as_offsetable_lo10=no
- else
- gcc_cv_as_offsetable_lo10=yes
- fi
+ gcc_GAS_CHECK_FEATURE([unaligned pcrel relocs against hidden symbols],
+ gcc_cv_as_sparc_ua_pcrel_hidden,,
+ [-K PIC],
+[.data
+.align 4
+.byte 0x31
+.uaword %r_disp32(foo)
+.byte 0x32, 0x33, 0x34
+.global foo
+.hidden foo
+foo:
+.skip 4],
+ [if test x$gcc_cv_ld != x && test x$gcc_cv_objdump != x \
+ && $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1 \
+ && $gcc_cv_objdump -s -j .data conftest 2> /dev/null \
+ | grep ' 31000000 07323334' > /dev/null 2>&1; then
+ if $gcc_cv_objdump -R conftest 2> /dev/null \
+ | grep 'DISP32' > /dev/null 2>&1; then
+ :
else
- gcc_cv_as_offsetable_lo10=no
+ gcc_cv_as_sparc_ua_pcrel_hidden=yes
fi
- rm -f conftest.s conftest.o conftest1.s conftest1.o
- fi
- ])
- if test "x$gcc_cv_as_offsetable_lo10" = xyes; then
- AC_DEFINE(HAVE_AS_OFFSETABLE_LO10, 1,
- [Define if your assembler supports offsetable %lo().])
- fi
-
+ fi
+ rm -f conftest],
+ [AC_DEFINE(HAVE_AS_SPARC_UA_PCREL_HIDDEN, 1,
+ [Define if your assembler and linker support unaligned PC relative relocs against hidden symbols.])])
+ ]) # unaligned pcrel relocs
+
+ gcc_GAS_CHECK_FEATURE([offsetable %lo()],
+ gcc_cv_as_sparc_offsetable_lo10,,
+ [-xarch=v9],
+[.text
+ or %g1, %lo(ab) + 12, %g1
+ or %g1, %lo(ab + 12), %g1],
+ [if test x$gcc_cv_objdump != x \
+ && %gcc_cv_objdump -s -j .text conftest.o 2> /dev/null \
+ | grep ' 82106000 82106000' > /dev/null 2>&1; then
+ gcc_cv_as_offsetable_lo10=yes
+ fi],
+ [AC_DEFINE(HAVE_AS_OFFSETABLE_LO10, 1,
+ [Define if your assembler supports offsetable %lo().])])
;;
changequote(,)dnl
i[34567]86-*-* | x86_64-*-*)
changequote([,])dnl
- AC_MSG_CHECKING(assembler instructions)
- gcc_cv_as_instructions=
- if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,9,0,[
- gcc_cv_as_instructions="filds fists"
- ])
- elif test x$gcc_cv_as != x; then
- set "filds fists" "filds mem; fists mem"
- while test $# -gt 0
- do
- echo "$2" > conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_instructions=${gcc_cv_as_instructions}$1" "
- fi
- shift 2
- done
- rm -f conftest.s conftest.o
- fi
- if test x"$gcc_cv_as_instructions" != x; then
- AC_DEFINE_UNQUOTED(HAVE_GAS_`echo "$gcc_cv_as_instructions" | sed -e 's/ $//' | tr '[a-z ]' '[A-Z_]'`)
- fi
- AC_MSG_RESULT($gcc_cv_as_instructions)
-
- AC_MSG_CHECKING(assembler GOTOFF in data directives)
- gcc_cv_as_gotoff_in_data=no
- if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,11,0,[
- gcc_cv_as_gotoff_in_data=yes
- ])
- elif test x$gcc_cv_as != x; then
- cat > conftest.s <<EOF
- .text
+ gcc_GAS_CHECK_FEATURE([filds and fists mnemonics],
+ gcc_cv_as_ix86_filds_fists,
+ [2,9,0],, [filds mem; fists mem],,
+ [AC_DEFINE(HAVE_GAS_FILDS_FISTS, 1,
+ [Define if your assembler uses the new HImode fild and fist notation.])])
+
+ gcc_GAS_CHECK_FEATURE([GOTOFF in data],
+ gcc_cv_as_ix86_gotoff_in_data, [2,11,0],,
+[ .text
.L0:
nop
.data
- .long .L0@GOTOFF
-EOF
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_gotoff_in_data=yes
- fi
- fi
- AC_DEFINE_UNQUOTED(HAVE_AS_GOTOFF_IN_DATA,
+ .long .L0@GOTOFF],,
+ [AC_DEFINE_UNQUOTED(HAVE_AS_GOTOFF_IN_DATA,
[`if test $gcc_cv_as_gotoff_in_data = yes; then echo 1; else echo 0; fi`],
- [Define true if the assembler supports '.long foo@GOTOFF'.])
- AC_MSG_RESULT($gcc_cv_as_gotoff_in_data)
+ [Define true if the assembler supports '.long foo@GOTOFF'.])])
;;
ia64*-*-*)
- AC_CACHE_CHECK([assembler supports ltoffx and ldxmov],
- gcc_cv_as_ltoffx_ldxmov_relocs, [
- gcc_cv_as_ltoffx_ldxmov_relocs=unknown
- if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,14,0,[
- gcc_cv_as_ltoffx_ldxmov_relocs=yes
- ])
- elif test x$gcc_cv_as != x; then
- cat > conftest.s << 'EOF'
-changequote(,)dnl
- .text
+ gcc_GAS_CHECK_FEATURE([ltoffx and ldxmov relocs],
+ gcc_cv_as_ia64_ltoffx_ldxmov_relocs, [2,14,0],,
+changequote(<<,>>)dnl
+<< .text
addl r15 = @ltoffx(x#), gp
;;
- ld8.mov r16 = [r15], x#
-EOF
+ ld8.mov r16 = [r15], x#>>,
changequote([,])dnl
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_ltoffx_ldxmov_relocs=yes
- else
- gcc_cv_as_ltoffx_ldxmov_relocs=no
- fi
- rm -f conftest.s conftest.o
- fi
- ])
- if test "x$gcc_cv_as_ltoffx_ldxmov_relocs" = xyes; then
- AC_DEFINE(HAVE_AS_LTOFFX_LDXMOV_RELOCS, 1,
- [Define if your assembler supports ltoffx and ldxmov relocations.])
- fi
+ [AC_DEFINE(HAVE_AS_LTOFFX_LDXMOV_RELOCS, 1,
+ [Define if your assembler supports ltoffx and ldxmov relocations.])])
+
;;
+
powerpc*-*-*)
- AC_CACHE_CHECK([assembler supports mfcr field],
- gcc_cv_as_mfcrf, [
- gcc_cv_as_mfcrf=unknown
- if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,14,0,[
- gcc_cv_as_mfcrf=yes
- ])
- elif test x$gcc_cv_as != x; then
- cat > conftest.s << 'EOF'
- case "$target" in
-changequote(,)dnl
- *-*-aix*)
- .csect .text[PR]
- ;;
- *)
- .text
- ;;
- esac
- mfcr 3,128
-EOF
-changequote([,])dnl
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- gcc_cv_as_mfcrf=yes
- else
- gcc_cv_as_mfcrf=no
- fi
- rm -f conftest.s conftest.o
- fi
- ])
- if test "x$gcc_cv_as_mfcrf" = xyes; then
- AC_DEFINE(HAVE_AS_MFCRF, 1,
- [Define if your assembler supports mfcr field.])
- fi
+ case $target in
+ *-*-aix) conftest_s=' .csect .text[PR]';;
+ *) conftest_s=' .text';;
+ esac
+ conftest_s="$conftest_s
+ mfcr 3,128"
+
+ gcc_GAS_CHECK_FEATURE([mfcr field support],
+ gcc_cv_as_powerpc_mfcrf, [2,14,0],,
+ [$conftest_s],,
+ [AC_DEFINE(HAVE_AS_MFCRF, 1,
+ [Define if your assembler supports mfcr field.])])
;;
-esac
-AC_MSG_CHECKING(assembler dwarf2 debug_line support)
-gcc_cv_as_dwarf2_debug_line=no
+ mips*-*-*)
+ gcc_GAS_CHECK_FEATURE([explicit relocation support],
+ gcc_cv_as_mips_explicit_relocs, [2,14,0],,
+[ lw $4,%gp_rel(foo)($4)],,
+ [if test x$target_cpu_default = x
+ then target_cpu_default=MASK_EXPLICIT_RELOCS
+ else target_cpu_default="($target_cpu_default)|MASK_EXPLICIT_RELOCS"
+ fi])
+
+ ;;
+esac
# ??? Not all targets support dwarf2 debug_line, even within a version
# of gas. Moreover, we need to emit a valid instruction to trigger any
# info to the output file. So, as supported targets are added to gas 2.11,
mmix-*-*)
insn="swym 0"
;;
- esac
-if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,11,0,[
- test $in_tree_gas_is_elf = yes && test x"$insn" != x \
- && gcc_cv_as_dwarf2_debug_line="yes"
- ])
-elif test x$gcc_cv_as != x -a x"$insn" != x ; then
- echo ' .file 1 "conftest.s"' > conftest.s
- echo ' .loc 1 3 0' >> conftest.s
- echo " $insn" >> conftest.s
- # ??? This fails with non-gnu grep.
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1 \
- && grep debug_line conftest.o > /dev/null 2>&1 ; then
- # The .debug_line file table must be in the exact order that
- # we specified the files, since these indices are also used
- # by DW_AT_decl_file. Approximate this test by testing if
- # the assembler bitches if the same index is assigned twice.
- echo ' .file 1 "foo.s"' > conftest.s
- echo ' .file 1 "bar.s"' >> conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1
- then
- gcc_cv_as_dwarf2_debug_line="no"
- else
- gcc_cv_as_dwarf2_debug_line="yes"
- fi
- fi
- rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
-fi
-if test x"$gcc_cv_as_dwarf2_debug_line" = xyes; then
+esac
+if test x"$insn" != x; then
+ conftest_s="\
+ .file 1 \"conftest.s\"
+ .loc 1 3 0
+ $insn"
+ gcc_GAS_CHECK_FEATURE([dwarf2 debug_line support],
+ gcc_cv_as_dwarf2_debug_line,
+ [elf,2,11,0],, [$conftest_s],
+ [# ??? This fails with non-gnu grep. Maybe use objdump?
+ if grep debug_line conftest.o > /dev/null 2>&1; then
+ gcc_cv_as_dwarf2_debug_line=yes
+ fi])
+
+# The .debug_line file table must be in the exact order that
+# we specified the files, since these indices are also used
+# by DW_AT_decl_file. Approximate this test by testing if
+# the assembler bitches if the same index is assigned twice.
+ gcc_GAS_CHECK_FEATURE([buggy dwarf2 .file directive],
+ gcc_cv_as_dwarf2_file_buggy,,,
+[ .file 1 "foo.s"
+ .file 1 "bar.s"])
+
+ if test $gcc_cv_as_dwarf2_debug_line = yes \
+ && test $gcc_cv_as_dwarf2_file_buggy = no; then
AC_DEFINE(HAVE_AS_DWARF2_DEBUG_LINE, 1,
-[Define if your assembler supports dwarf2 .file/.loc directives,
+ [Define if your assembler supports dwarf2 .file/.loc directives,
and preserves file table indices exactly as given.])
+ fi
+
+ gcc_GAS_CHECK_FEATURE([--gdwarf2 option],
+ gcc_cv_as_gdwarf2_flag,
+ [elf,2,11,0], [--gdwarf2], [$insn],,
+ [AC_DEFINE(HAVE_AS_GDWARF2_DEBUG_FLAG, 1,
+[Define if your assembler supports the --gdwarf2 option.])])
+
+ gcc_GAS_CHECK_FEATURE([--gstabs option],
+ gcc_cv_as_gstabs_flag,
+ [elf,2,11,0], [--gstabs], [$insn],
+ [# The native Solaris 9/Intel assembler doesn't understand --gstabs
+ # and warns about it, but still exits successfully. So check for
+ # this.
+ if AC_TRY_COMMAND([$gcc_cv_as --gstabs -o conftest.o conftest.s 2>&1 | grep -i warning > /dev/null])
+ then :
+ else gcc_cv_as_gstabs_flag=yes
+ fi],
+ [AC_DEFINE(HAVE_AS_GSTABS_DEBUG_FLAG, 1,
+[Define if your assembler supports the --gstabs option.])])
fi
-AC_MSG_RESULT($gcc_cv_as_dwarf2_debug_line)
-
-AC_MSG_CHECKING(assembler --gdwarf2 support)
-gcc_cv_as_gdwarf2_flag=no
-if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,11,0,[
- test $in_tree_gas_is_elf = yes && test x"$insn" != x \
- && gcc_cv_as_gdwarf2_flag="yes"
- ])
-elif test x$gcc_cv_as != x -a x"$insn" != x ; then
- echo '' > conftest.s
- # ??? This fails with non-gnu grep.
- if $gcc_cv_as --gdwarf2 -o conftest.o conftest.s > /dev/null 2>&1
- then
- gcc_cv_as_gdwarf2_flag="yes"
- fi
- rm -f conftest.s conftest.o
-fi
-if test x"$gcc_cv_as_gdwarf2_flag" = xyes; then
- AC_DEFINE(HAVE_AS_GDWARF2_DEBUG_FLAG, 1,
-[Define if your assembler supports the --gdwarf2 option.])
-fi
-AC_MSG_RESULT($gcc_cv_as_gdwarf2_flag)
-
-AC_MSG_CHECKING(assembler --gstabs support)
-gcc_cv_as_gstabs_flag=no
-if test $in_tree_gas = yes ; then
- gcc_GAS_VERSION_GTE_IFELSE(2,11,0,[
- test $in_tree_gas_is_elf = yes && test x"$insn" != x \
- && gcc_cv_as_gstabs_flag="yes"
- ])
-elif test x$gcc_cv_as != x -a x"$insn" != x ; then
- echo '' > conftest.s
- # ??? This fails with non-gnu grep.
- if $gcc_cv_as --gstabs -o conftest.o conftest.s > /dev/null 2>&1 ; then
- gcc_cv_as_gstabs_flag="yes"
- # The native Solaris 9/Intel assembler doesn't understand --gstabs
- # and warns about it, but still exits successfully. So check for
- # this.
- if $gcc_cv_as --gstabs -o conftest.o conftest.s 2>&1 | \
- grep -i warning > /dev/null ; then
- gcc_cv_as_gstabs_flag="no"
- fi
- fi
- rm -f conftest.s conftest.o
-fi
-if test x"$gcc_cv_as_gstabs_flag" = xyes; then
- AC_DEFINE(HAVE_AS_GSTABS_DEBUG_FLAG, 1,
-[Define if your assembler supports the --gstabs option.])
-fi
-AC_MSG_RESULT($gcc_cv_as_gstabs_flag)
AC_MSG_CHECKING(linker read-only and read-write section mixing)
gcc_cv_ld_ro_rw_mix=unknown
[Define if your MIPS libgloss linker scripts consistently include STARTUP directives.])
fi
AC_MSG_RESULT($gcc_cv_mips_libgloss_startup)
-
- AC_MSG_CHECKING(whether the assembler has explicit relocation support)
- if test x$gcc_cv_mips_explicit_relocs = x; then
- gcc_cv_mips_explicit_relocs=no
- if test $in_tree_gas = yes; then
- gcc_GAS_VERSION_GTE_IFELSE(2,14,0,[
- gcc_cv_mips_explicit_relocs=yes
- ])
- elif test x$gcc_cv_as != x; then
- echo ' lw $4,%gp_rel(foo)($4)' > conftest.s
- if $gcc_cv_as conftest.s -o conftest.o > /dev/null 2>&1; then
- gcc_cv_mips_explicit_relocs=yes
- fi
- rm -f conftest.s conftest.o
- fi
- fi
- if test $gcc_cv_mips_explicit_relocs = yes; then
- test x$target_cpu_default != x || target_cpu_default=0
- target_cpu_default="(${target_cpu_default}|MASK_EXPLICIT_RELOCS)"
- fi
- AC_MSG_RESULT($gcc_cv_mips_explicit_relocs)
;;
esac
if test x$with_sysroot = x && test x$host = x$target \
&& test "$prefix" != "/usr" && test "x$prefix" != "x$local_prefix" ; then
- AC_DEFINE_UNQUOTED(PREFIX_INCLUDE_DIR, "$prefix/include")
+ AC_DEFINE_UNQUOTED(PREFIX_INCLUDE_DIR, "$prefix/include",
+[Define to PREFIX/include if cpp should also search that directory.])
fi
# Figure out what language subdirectories are present.
OSDN Git Service
