2003-04-28 Mohan Embar <gnustuff@thisiscool.com>

	* configure.in: define GC_DLL under mingw if --enable-shared
	* configure: rebuilt
	* win32_threads.c: add #ifdef GC_DLL around DllMain

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@66183 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/boehm-gc/ChangeLog b/boehm-gc/ChangeLog
index b2fff36..f3d34f2 100644 (file)
--- a/boehm-gc/ChangeLog
+++ b/boehm-gc/ChangeLog
@@ -1,3 +1,9 @@
+2003-04-28  Mohan Embar  <gnustuff@thisiscool.com>
+
+       * configure.in: define GC_DLL under mingw if --enable-shared
+       * configure: rebuilt
+       * win32_threads.c: add #ifdef GC_DLL around DllMain
+
 2003-04-16  Richard Earnshaw  <rearnsha@arm.com>
 
        * include/private/gcconfig.h: Add support for arm-netbsdelf.

diff --git a/boehm-gc/configure b/boehm-gc/configure
index 6bd6ed6..ef1a1a7 100755 (executable)
--- a/boehm-gc/configure
+++ b/boehm-gc/configure
@@ -61,6 +61,7 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
+sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -175,6 +176,7 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
+  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -345,6 +347,11 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
+  -site-file | --site-file | --site-fil | --site-fi | --site-f)
+    ac_prev=sitefile ;;
+  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+    sitefile="$ac_optarg" ;;
+
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -510,12 +517,16 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+  if test -z "$CONFIG_SITE"; then
+    if test "x$prefix" != xNONE; then
+      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+    else
+      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+    fi
   fi
+else
+  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -593,7 +604,7 @@ ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:597: checking for a BSD compatible install" >&5
+echo "configure:608: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -646,7 +657,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:650: checking whether build environment is sane" >&5
+echo "configure:661: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -703,7 +714,7 @@ test "$program_suffix" != NONE &&
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:707: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:718: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -736,12 +747,12 @@ else
 fi
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:740: checking for Cygwin environment" >&5
+echo "configure:751: checking for Cygwin environment" >&5
 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 745 "configure"
+#line 756 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -752,7 +763,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:756: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:767: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -769,19 +780,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:773: checking for mingw32 environment" >&5
+echo "configure:784: checking for mingw32 environment" >&5
 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 778 "configure"
+#line 789 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:785: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:796: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -892,7 +903,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:896: checking host system type" >&5
+echo "configure:907: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -913,7 +924,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:917: checking target system type" >&5
+echo "configure:928: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -931,7 +942,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:935: checking build system type" >&5
+echo "configure:946: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -971,7 +982,7 @@ fi
 
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:975: checking for working aclocal" >&5
+echo "configure:986: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -984,7 +995,7 @@ else
 fi
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:988: checking for working autoconf" >&5
+echo "configure:999: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -997,7 +1008,7 @@ else
 fi
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1001: checking for working automake" >&5
+echo "configure:1012: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1010,7 +1021,7 @@ else
 fi
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1014: checking for working autoheader" >&5
+echo "configure:1025: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1023,7 +1034,7 @@ else
 fi
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1027: checking for working makeinfo" >&5
+echo "configure:1038: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1049,7 +1060,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1053: checking for $ac_word" >&5
+echo "configure:1064: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1079,7 +1090,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1083: checking for $ac_word" >&5
+echo "configure:1094: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1128,7 +1139,7 @@ fi
 fi
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1132: checking whether we are using GNU C" >&5
+echo "configure:1143: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1137,7 +1148,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1141: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1152: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1152,7 +1163,7 @@ if test $ac_cv_prog_gcc = yes; then
   ac_save_CFLAGS="$CFLAGS"
   CFLAGS=
   echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1156: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1167: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1189,7 +1200,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1193: checking for $ac_word" >&5
+echo "configure:1204: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1222,7 +1233,7 @@ test -n "$CXX" || CXX="gcc"
 test -z "$CXX" && { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; }
 
 echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1226: checking whether we are using GNU C++" >&5
+echo "configure:1237: checking whether we are using GNU C++" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1231,7 +1242,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1235: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1246: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gxx=yes
 else
   ac_cv_prog_gxx=no
@@ -1246,7 +1257,7 @@ if test $ac_cv_prog_gxx = yes; then
   ac_save_CXXFLAGS="$CXXFLAGS"
   CXXFLAGS=
   echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1250: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1261: checking whether ${CXX-g++} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1279,7 +1290,7 @@ fi
 # NEWLIB_CONFIGURE, which doesn't work because that means that it will
 # be run before AC_CANONICAL_HOST.
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1283: checking build system type" >&5
+echo "configure:1294: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -1300,7 +1311,7 @@ echo "$ac_t""$build" 1>&6
 # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
 set dummy ${ac_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1304: checking for $ac_word" >&5
+echo "configure:1315: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1332,7 +1343,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1336: checking for $ac_word" >&5
+echo "configure:1347: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1364,7 +1375,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1368: checking for $ac_word" >&5
+echo "configure:1379: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1396,7 +1407,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1400: checking for $ac_word" >&5
+echo "configure:1411: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1441,7 +1452,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1445: checking for a BSD compatible install" >&5
+echo "configure:1456: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1495,7 +1506,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1499: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1510: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -1533,7 +1544,7 @@ if false; then
   
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1537: checking for executable suffix" >&5
+echo "configure:1548: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1543,10 +1554,10 @@ else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:1547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:1558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
-      *.c | *.o | *.obj) ;;
+      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
       *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
       esac
     done
@@ -1665,7 +1676,7 @@ ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1669: checking for ld used by GCC" >&5
+echo "configure:1680: checking for ld used by GCC" >&5
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -1695,10 +1706,10 @@ echo "configure:1669: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1699: checking for GNU ld" >&5
+echo "configure:1710: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1702: checking for non-GNU ld" >&5
+echo "configure:1713: checking for non-GNU ld" >&5
 fi
 if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1733,7 +1744,7 @@ else
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1737: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1748: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1750,7 +1761,7 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
 echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1754: checking for $LD option to reload object files" >&5
+echo "configure:1765: checking for $LD option to reload object files" >&5
 if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1762,7 +1773,7 @@ reload_flag=$lt_cv_ld_reload_flag
 test -n "$reload_flag" && reload_flag=" $reload_flag"
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1766: checking for BSD-compatible nm" >&5
+echo "configure:1777: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1800,7 +1811,7 @@ NM="$lt_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1804: checking whether ln -s works" >&5
+echo "configure:1815: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1821,7 +1832,7 @@ else
 fi
 
 echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1825: checking how to recognise dependant libraries" >&5
+echo "configure:1836: checking how to recognise dependant libraries" >&5
 if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1994,13 +2005,13 @@ file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 
 echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1998: checking for object suffix" >&5
+echo "configure:2009: checking for object suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   rm -f conftest*
 echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2004: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2015: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   for ac_file in conftest.*; do
     case $ac_file in
     *.c) ;;
@@ -2024,7 +2035,7 @@ case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
     echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2028: checking for ${ac_tool_prefix}file" >&5
+echo "configure:2039: checking for ${ac_tool_prefix}file" >&5
 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2086,7 +2097,7 @@ fi
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
     echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2090: checking for file" >&5
+echo "configure:2101: checking for file" >&5
 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2157,7 +2168,7 @@ esac
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2161: checking for $ac_word" >&5
+echo "configure:2172: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2189,7 +2200,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2193: checking for $ac_word" >&5
+echo "configure:2204: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2224,7 +2235,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2228: checking for $ac_word" >&5
+echo "configure:2239: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2256,7 +2267,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2260: checking for $ac_word" >&5
+echo "configure:2271: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2323,8 +2334,8 @@ test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
 case $host in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 2327 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2328: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 2338 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:2339: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
    if test "$lt_cv_prog_gnu_ld" = yes; then
     case `/usr/bin/file conftest.$ac_objext` in
     *32-bit*)
@@ -2357,7 +2368,7 @@ case $host in
 ia64-*-hpux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2361: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  if { (eval echo configure:2372: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *ELF-32*)
       HPUX_IA64_MODE="32"
@@ -2373,7 +2384,7 @@ ia64-*-hpux*)
 x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
-  if { (eval echo configure:2377: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  if { (eval echo configure:2388: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       case $host in
@@ -2417,7 +2428,7 @@ x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2421: checking whether the C compiler needs -belf" >&5
+echo "configure:2432: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2430,14 +2441,14 @@ ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$a
 cross_compiling=$ac_cv_prog_cc_cross
 
      cat > conftest.$ac_ext <<EOF
-#line 2434 "configure"
+#line 2445 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2441: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2452: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -2467,7 +2478,7 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
 esac
 
 echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:2471: checking how to run the C++ preprocessor" >&5
+echo "configure:2482: checking how to run the C++ preprocessor" >&5
 if test -z "$CXXCPP"; then
 if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2480,12 +2491,12 @@ ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftes
 cross_compiling=$ac_cv_prog_cxx_cross
   CXXCPP="${CXX-g++} -E"
   cat > conftest.$ac_ext <<EOF
-#line 2484 "configure"
+#line 2495 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2489: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2500: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2632,7 +2643,7 @@ fi
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2636: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:2647: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -2665,7 +2676,7 @@ if false; then
   
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2669: checking for executable suffix" >&5
+echo "configure:2680: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2675,10 +2686,10 @@ else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:2679: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:2690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
-      *.c | *.o | *.obj) ;;
+      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
       *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
       esac
     done
@@ -2698,7 +2709,7 @@ ac_exeext=$EXEEXT
 fi
 
 echo $ac_n "checking for thread model used by GCC""... $ac_c" 1>&6
-echo "configure:2702: checking for thread model used by GCC" >&5
+echo "configure:2713: checking for thread model used by GCC" >&5
 THREADS=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
 if test -z "$THREADS"; then
    THREADS=no
@@ -2818,6 +2829,12 @@ EOF
 #define NO_GETENV 1
 EOF
 
+    if test $enable_shared = yes; then
+      cat >> confdefs.h <<\EOF
+#define GC_DLL 1
+EOF
+
+    fi
     ;;
  decosf1 | irix | mach | os2 | solaris | dce | vxworks)
     { echo "configure: error: thread package $THREADS not yet supported" 1>&2; exit 1; }
@@ -2829,7 +2846,7 @@ esac
 
 
 echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:2833: checking for dlopen in -ldl" >&5
+echo "configure:2850: checking for dlopen in -ldl" >&5
 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2837,7 +2854,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-ldl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2841 "configure"
+#line 2858 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2848,7 +2865,7 @@ int main() {
 dlopen()
 ; return 0; }
 EOF
-if { (eval echo configure:2852: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2869: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -3171,34 +3188,15 @@ trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 # Transform confdefs.h into DEFS.
 # Protect against shell expansion while executing Makefile rules.
 # Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section.  Otherwise,
-# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
-t clear
-: clear
-s,^[   ]*#[    ]*define[       ][      ]*\([^  (][^    (]*([^)]*)\)[   ]*\(.*\),-D\1=\2,g
-t quote
-s,^[   ]*#[    ]*define[       ][      ]*\([^  ][^     ]*\)[   ]*\(.*\),-D\1=\2,g
-t quote
-d
-: quote
-s,[    `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output.  A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[    `~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
 
 
 # Without the "./", some shells look in PATH for config.status.
@@ -3329,7 +3327,7 @@ cat >> $CONFIG_STATUS <<\EOF
 
 # Split the substitutions into bite-sized pieces for seds with
 # small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_max_sed_cmds=60 # Maximum number of lines to put in a sed script.
 ac_file=1 # Number of current file.
 ac_beg=1 # First line for current file.
 ac_end=$ac_max_sed_cmds # Line after last line for current file.

diff --git a/boehm-gc/configure.in b/boehm-gc/configure.in
index 9da2040..95e9d7c 100644 (file)
--- a/boehm-gc/configure.in
+++ b/boehm-gc/configure.in
@@ -116,6 +116,9 @@ case "$THREADS" in
  win32)
     AC_DEFINE(GC_WIN32_THREADS)
     AC_DEFINE(NO_GETENV)
+    if test $enable_shared = yes; then
+      AC_DEFINE(GC_DLL)
+    fi
     ;;
  decosf1 | irix | mach | os2 | solaris | dce | vxworks)
     AC_MSG_ERROR(thread package $THREADS not yet supported)

diff --git a/boehm-gc/win32_threads.c b/boehm-gc/win32_threads.c
index 9987fc6..954b18d 100644 (file)
--- a/boehm-gc/win32_threads.c
+++ b/boehm-gc/win32_threads.c
@@ -527,6 +527,8 @@ DWORD WINAPI main_thread_start(LPVOID arg)
 
 LONG WINAPI GC_write_fault_handler(struct _EXCEPTION_POINTERS *exc_info);
 
+#ifdef GC_DLL
+
 /*
  * This isn't generally safe, since DllMain is not premptible.
  * If another thread holds the lock while this runs we're in trouble.
@@ -635,6 +637,8 @@ BOOL WINAPI DllMain(HINSTANCE inst, ULONG reason, LPVOID reserved)
   return TRUE;
 }
 
+#   endif /* GC_DLL */
+
 # endif /* !MSWINCE */
 
 #endif /* GC_WIN32_THREADS */