* fixinc/inclhack.def (libc1_G_va_list): New fix.

	* fixinc/fixincl.x: Regenerate.
	* config/i386/linux.h: Move MD_FALLBACK_FRAME_STATE_FOR inside
	ifndef IN_LIBGCC2.  Wrap it together with signal.h and
	sys/ucontext.h inclusion in ifndef USE_GNULIBC_1.
	* configure.in (gcc_AC_CHECK_DECLS): Check vasprintf too.
	* config.in, configure: Regenerate.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@58510 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index 5495ed8..7e588e9 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,13 @@
+2002-10-24  Hans-Peter Nilsson  <hp@bitrange.com>
+
+       * fixinc/inclhack.def (libc1_G_va_list): New fix.
+       * fixinc/fixincl.x: Regenerate.
+       * config/i386/linux.h: Move MD_FALLBACK_FRAME_STATE_FOR inside
+       ifndef IN_LIBGCC2.  Wrap it together with signal.h and
+       sys/ucontext.h inclusion in ifndef USE_GNULIBC_1.
+       * configure.in (gcc_AC_CHECK_DECLS): Check vasprintf too.
+       * config.in, configure: Regenerate.
+
 2002-10-24  Igor Shevlyakov <igor@microunity.com>
 
         * varasm.c (struct rtx_const): Array size 16 for V16QImode.

diff --git a/gcc/config.in b/gcc/config.in
index de68c88..0e3a91e 100644 (file)
--- a/gcc/config.in
+++ b/gcc/config.in
@@ -441,6 +441,9 @@
 #undef HAVE_DECL_ERRNO
 
 /* Define to 1 if we found this declaration otherwise define to 0. */
+#undef HAVE_DECL_VASPRINTF
+
+/* Define to 1 if we found this declaration otherwise define to 0. */
 #undef HAVE_DECL_MALLOC
 
 /* Define to 1 if we found this declaration otherwise define to 0. */

diff --git a/gcc/config/i386/linux.h b/gcc/config/i386/linux.h
index 3bc20fe..54479d2 100644 (file)
--- a/gcc/config/i386/linux.h
+++ b/gcc/config/i386/linux.h
@@ -230,9 +230,13 @@ Boston, MA 02111-1307, USA.  */
    state data appropriately.  See unwind-dw2.c for the structs.  */
 
 #ifdef IN_LIBGCC2
+/* There's no sys/ucontext.h for some (all?) libc1, so no
+   signal-turned-exceptions for them.  There's also no configure-run for
+   the target, so we can't check on (e.g.) HAVE_SYS_UCONTEXT_H.  Using the
+   target libc1 macro should be enough.  */
+#ifndef USE_GNULIBC_1
 #include <signal.h>
 #include <sys/ucontext.h>
-#endif
 
 #define MD_FALLBACK_FRAME_STATE_FOR(CONTEXT, FS, SUCCESS)              \
   do {                                                                 \
@@ -287,3 +291,5 @@ Boston, MA 02111-1307, USA.  */
     (FS)->retaddr_column = 8;                                          \
     goto SUCCESS;                                                      \
   } while (0)
+#endif /* not USE_GNULIBC_1 */
+#endif /* IN_LIBGCC2 */

diff --git a/gcc/configure b/gcc/configure
index d03e60d..6b75729 100755 (executable)
--- a/gcc/configure
+++ b/gcc/configure
@@ -4595,7 +4595,7 @@ saved_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS -I${srcdir} -I${srcdir}/../include"
 for ac_func in getenv atol sbrk abort atof getcwd getwd \
        strsignal putc_unlocked fputs_unlocked fwrite_unlocked \
-        fprintf_unlocked strstr errno \
+        fprintf_unlocked strstr errno vasprintf \
        malloc realloc calloc free basename getopt clock
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
@@ -4689,6 +4689,9 @@ EOF
  cat >> confdefs.h <<\EOF
 #define HAVE_DECL_ERRNO 1
 EOF
+ cat >> confdefs.h <<\EOF
+#define HAVE_DECL_VASPRINTF 1
+EOF
  \
        cat >> confdefs.h <<\EOF
 #define HAVE_DECL_MALLOC 1
@@ -4718,12 +4721,12 @@ for ac_func in getrlimit setrlimit getrusage
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4722: checking whether $ac_func is declared" >&5
+echo "configure:4725: checking whether $ac_func is declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4727 "configure"
+#line 4730 "configure"
 #include "confdefs.h"
 #undef $ac_tr_decl
 #define $ac_tr_decl 1
@@ -4741,7 +4744,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:4745: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4748: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_have_decl_$ac_func=yes"
 else
@@ -4783,12 +4786,12 @@ for ac_func in times
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:4787: checking whether $ac_func is declared" >&5
+echo "configure:4790: checking whether $ac_func is declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4792 "configure"
+#line 4795 "configure"
 #include "confdefs.h"
 #undef $ac_tr_decl
 #define $ac_tr_decl 1
@@ -4806,7 +4809,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:4810: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4813: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_have_decl_$ac_func=yes"
 else
@@ -4840,13 +4843,13 @@ fi
 
 # More time-related stuff.
 echo $ac_n "checking for struct tms""... $ac_c" 1>&6
-echo "configure:4844: checking for struct tms" >&5
+echo "configure:4847: checking for struct tms" >&5
 if eval "test \"`echo '$''{'ac_cv_struct_tms'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   
 cat > conftest.$ac_ext <<EOF
-#line 4850 "configure"
+#line 4853 "configure"
 #include "confdefs.h"
 
 #include "ansidecl.h"
@@ -4859,7 +4862,7 @@ int main() {
 struct tms tms;
 ; return 0; }
 EOF
-if { (eval echo configure:4863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4866: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_struct_tms=yes
 else
@@ -4882,13 +4885,13 @@ fi
 # use gcc_cv_* here because this doesn't match the behavior of AC_CHECK_TYPE.
 # revisit after autoconf 2.50.
 echo $ac_n "checking for clock_t""... $ac_c" 1>&6
-echo "configure:4886: checking for clock_t" >&5
+echo "configure:4889: checking for clock_t" >&5
 if eval "test \"`echo '$''{'gcc_cv_type_clock_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   
 cat > conftest.$ac_ext <<EOF
-#line 4892 "configure"
+#line 4895 "configure"
 #include "confdefs.h"
 
 #include "ansidecl.h"
@@ -4898,7 +4901,7 @@ int main() {
 clock_t x;
 ; return 0; }
 EOF
-if { (eval echo configure:4902: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4905: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_type_clock_t=yes
 else
@@ -4923,12 +4926,12 @@ CFLAGS="$saved_CFLAGS"
 
 # mkdir takes a single argument on some systems. 
 echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:4927: checking if mkdir takes one argument" >&5
+echo "configure:4930: checking if mkdir takes one argument" >&5
 if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4932 "configure"
+#line 4935 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -4945,7 +4948,7 @@ int main() {
 mkdir ("foo", 0);
 ; return 0; }
 EOF
-if { (eval echo configure:4949: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4952: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_mkdir_takes_one_arg=no
 else
@@ -5213,14 +5216,14 @@ fi
 
             
 echo $ac_n "checking for library containing strerror""... $ac_c" 1>&6
-echo "configure:5217: checking for library containing strerror" >&5
+echo "configure:5220: checking for library containing strerror" >&5
 if eval "test \"`echo '$''{'ac_cv_search_strerror'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_func_search_save_LIBS="$LIBS"
 ac_cv_search_strerror="no"
 cat > conftest.$ac_ext <<EOF
-#line 5224 "configure"
+#line 5227 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -5231,7 +5234,7 @@ int main() {
 strerror()
 ; return 0; }
 EOF
-if { (eval echo configure:5235: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5238: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_strerror="none required"
 else
@@ -5242,7 +5245,7 @@ rm -f conftest*
 test "$ac_cv_search_strerror" = "no" && for i in cposix; do
 LIBS="-l$i  $ac_func_search_save_LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 5246 "configure"
+#line 5249 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -5253,7 +5256,7 @@ int main() {
 strerror()
 ; return 0; }
 EOF
-if { (eval echo configure:5257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_strerror="-l$i"
 break
@@ -5276,12 +5279,12 @@ fi
   
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:5280: checking for working const" >&5
+echo "configure:5283: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5285 "configure"
+#line 5288 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -5330,7 +5333,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5334: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5337: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -5351,12 +5354,12 @@ EOF
 fi
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:5355: checking for off_t" >&5
+echo "configure:5358: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5360 "configure"
+#line 5363 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -5384,12 +5387,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:5388: checking for size_t" >&5
+echo "configure:5391: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5393 "configure"
+#line 5396 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -5419,19 +5422,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:5423: checking for working alloca.h" >&5
+echo "configure:5426: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5428 "configure"
+#line 5431 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:5435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5438: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -5452,12 +5455,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:5456: checking for alloca" >&5
+echo "configure:5459: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5461 "configure"
+#line 5464 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -5485,7 +5488,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:5489: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5492: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -5517,12 +5520,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:5521: checking whether alloca needs Cray hooks" >&5
+echo "configure:5524: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5526 "configure"
+#line 5529 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -5547,12 +5550,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5551: checking for $ac_func" >&5
+echo "configure:5554: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5556 "configure"
+#line 5559 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5575,7 +5578,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:5579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5602,7 +5605,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:5606: checking stack direction for C alloca" >&5
+echo "configure:5609: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5610,7 +5613,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 5614 "configure"
+#line 5617 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -5629,7 +5632,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:5633: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5636: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -5652,12 +5655,12 @@ fi
 
 
     echo $ac_n "checking whether we are using the GNU C Library 2.1 or newer""... $ac_c" 1>&6
-echo "configure:5656: checking whether we are using the GNU C Library 2.1 or newer" >&5
+echo "configure:5659: checking whether we are using the GNU C Library 2.1 or newer" >&5
 if eval "test \"`echo '$''{'ac_cv_gnu_library_2_1'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5661 "configure"
+#line 5664 "configure"
 #include "confdefs.h"
 
 #include <features.h>
@@ -5693,17 +5696,17 @@ stdlib.h string.h unistd.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5697: checking for $ac_hdr" >&5
+echo "configure:5700: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5702 "configure"
+#line 5705 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5707: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5710: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -5734,12 +5737,12 @@ getgid getuid mempcpy munmap putenv setenv setlocale stpcpy strchr strcasecmp \
 strdup strtoul tsearch __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5738: checking for $ac_func" >&5
+echo "configure:5741: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5743 "configure"
+#line 5746 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5762,7 +5765,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:5766: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5769: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5803,7 +5806,7 @@ fi
 
 
   echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:5807: checking for iconv" >&5
+echo "configure:5810: checking for iconv" >&5
 if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5811,7 +5814,7 @@ else
     am_cv_func_iconv="no, consider installing GNU libiconv"
     am_cv_lib_iconv=no
     cat > conftest.$ac_ext <<EOF
-#line 5815 "configure"
+#line 5818 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <iconv.h>
@@ -5821,7 +5824,7 @@ iconv_t cd = iconv_open("","");
        iconv_close(cd);
 ; return 0; }
 EOF
-if { (eval echo configure:5825: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5828: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_func_iconv=yes
 else
@@ -5833,7 +5836,7 @@ rm -f conftest*
       am_save_LIBS="$LIBS"
       LIBS="$LIBS $am_cv_libiconv_ldpath -liconv"
       cat > conftest.$ac_ext <<EOF
-#line 5837 "configure"
+#line 5840 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <iconv.h>
@@ -5843,7 +5846,7 @@ iconv_t cd = iconv_open("","");
          iconv_close(cd);
 ; return 0; }
 EOF
-if { (eval echo configure:5847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5850: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_lib_iconv=yes
         am_cv_func_iconv=yes
@@ -5864,13 +5867,13 @@ echo "$ac_t""$am_cv_func_iconv" 1>&6
 EOF
 
     echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
-echo "configure:5868: checking for iconv declaration" >&5
+echo "configure:5871: checking for iconv declaration" >&5
     if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   
       cat > conftest.$ac_ext <<EOF
-#line 5874 "configure"
+#line 5877 "configure"
 #include "confdefs.h"
 
 #include <stdlib.h>
@@ -5889,7 +5892,7 @@ int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:5893: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5896: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   am_cv_proto_iconv_arg1=""
 else
@@ -5918,19 +5921,19 @@ EOF
 
    
   echo $ac_n "checking for nl_langinfo and CODESET""... $ac_c" 1>&6
-echo "configure:5922: checking for nl_langinfo and CODESET" >&5
+echo "configure:5925: checking for nl_langinfo and CODESET" >&5
 if eval "test \"`echo '$''{'am_cv_langinfo_codeset'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5927 "configure"
+#line 5930 "configure"
 #include "confdefs.h"
 #include <langinfo.h>
 int main() {
 char* cs = nl_langinfo(CODESET);
 ; return 0; }
 EOF
-if { (eval echo configure:5934: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_langinfo_codeset=yes
 else
@@ -5953,19 +5956,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:5957: checking for LC_MESSAGES" >&5
+echo "configure:5960: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5962 "configure"
+#line 5965 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:5969: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -5986,7 +5989,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:5990: checking whether NLS is requested" >&5
+echo "configure:5993: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -6009,7 +6012,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:6013: checking whether included gettext is requested" >&5
+echo "configure:6016: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -6029,17 +6032,17 @@ fi
 
        ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:6033: checking for libintl.h" >&5
+echo "configure:6036: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6038 "configure"
+#line 6041 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6043: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6046: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6060,12 +6063,12 @@ if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
 EOF
 
            echo $ac_n "checking for GNU gettext in libc""... $ac_c" 1>&6
-echo "configure:6064: checking for GNU gettext in libc" >&5
+echo "configure:6067: checking for GNU gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6069 "configure"
+#line 6072 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 extern int _nl_msg_cat_cntr;
@@ -6074,7 +6077,7 @@ bindtextdomain ("", "");
 return (int) gettext ("") + _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:6078: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gnugettext1_libc=yes
 else
@@ -6090,14 +6093,14 @@ echo "$ac_t""$gt_cv_func_gnugettext1_libc" 1>&6
 
           if test "$gt_cv_func_gnugettext1_libc" != "yes"; then
             echo $ac_n "checking for GNU gettext in libintl""... $ac_c" 1>&6
-echo "configure:6094: checking for GNU gettext in libintl" >&5
+echo "configure:6097: checking for GNU gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gnugettext1_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   gt_save_LIBS="$LIBS"
                LIBS="$LIBS -lintl $LIBICONV"
                cat > conftest.$ac_ext <<EOF
-#line 6101 "configure"
+#line 6104 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 extern int _nl_msg_cat_cntr;
@@ -6106,7 +6109,7 @@ bindtextdomain ("", "");
 return (int) gettext ("") + _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:6110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6113: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gnugettext1_libintl=yes
 else
@@ -6139,12 +6142,12 @@ EOF
             for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6143: checking for $ac_func" >&5
+echo "configure:6146: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6148 "configure"
+#line 6151 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -6167,7 +6170,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:6171: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6174: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -6196,7 +6199,7 @@ done
                     # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6200: checking for $ac_word" >&5
+echo "configure:6203: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6230,7 +6233,7 @@ fi
             # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6234: checking for $ac_word" >&5
+echo "configure:6237: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6267,7 +6270,7 @@ fi
                     # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6271: checking for $ac_word" >&5
+echo "configure:6274: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6317,7 +6320,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6321: checking for $ac_word" >&5
+echo "configure:6324: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6351,7 +6354,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6355: checking for $ac_word" >&5
+echo "configure:6358: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6387,7 +6390,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6391: checking for $ac_word" >&5
+echo "configure:6394: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6459,7 +6462,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6463: checking for $ac_word" >&5
+echo "configure:6466: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_INTLBISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6492,7 +6495,7 @@ done
       ac_verc_fail=yes
     else
             echo $ac_n "checking version of bison""... $ac_c" 1>&6
-echo "configure:6496: checking version of bison" >&5
+echo "configure:6499: checking version of bison" >&5
       ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
       case $ac_prog_version in
         '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
@@ -6537,7 +6540,7 @@ EOF
 
          if test "x$CATOBJEXT" != x; then
      echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:6541: checking for catalogs to be installed" >&5
+echo "configure:6544: checking for catalogs to be installed" >&5
      # Look for .po and .gmo files in the source directory.
      CATALOGS=
      XLINGUAS=
@@ -6595,7 +6598,7 @@ fi
 case $host_os in
        win32 | pe | cygwin* | mingw32* | uwin*)
 echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:6599: checking whether windows registry support is requested" >&5
+echo "configure:6602: checking whether windows registry support is requested" >&5
 if test "x$enable_win32_registry" != xno; then
   cat >> confdefs.h <<\EOF
 #define ENABLE_WIN32_REGISTRY 1
@@ -6604,14 +6607,14 @@ EOF
   echo "$ac_t""yes" 1>&6
   
 echo $ac_n "checking for library containing RegOpenKeyExA""... $ac_c" 1>&6
-echo "configure:6608: checking for library containing RegOpenKeyExA" >&5
+echo "configure:6611: checking for library containing RegOpenKeyExA" >&5
 if eval "test \"`echo '$''{'ac_cv_search_RegOpenKeyExA'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_func_search_save_LIBS="$LIBS"
 ac_cv_search_RegOpenKeyExA="no"
 cat > conftest.$ac_ext <<EOF
-#line 6615 "configure"
+#line 6618 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -6622,7 +6625,7 @@ int main() {
 RegOpenKeyExA()
 ; return 0; }
 EOF
-if { (eval echo configure:6626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_RegOpenKeyExA="none required"
 else
@@ -6633,7 +6636,7 @@ rm -f conftest*
 test "$ac_cv_search_RegOpenKeyExA" = "no" && for i in advapi32; do
 LIBS="-l$i  $ac_func_search_save_LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 6637 "configure"
+#line 6640 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -6644,7 +6647,7 @@ int main() {
 RegOpenKeyExA()
 ; return 0; }
 EOF
-if { (eval echo configure:6648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6651: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_search_RegOpenKeyExA="-l$i"
 break
@@ -6686,7 +6689,7 @@ esac
 
 if test "x$enable_win32_registry" != xno; then
   echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:6690: checking registry key on windows hosts" >&5
+echo "configure:6693: checking registry key on windows hosts" >&5
   cat >> confdefs.h <<EOF
 #define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
 EOF
@@ -6900,7 +6903,7 @@ fi
 
 # Figure out what assembler we will be using.
 echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
-echo "configure:6904: checking what assembler to use" >&5
+echo "configure:6907: checking what assembler to use" >&5
 gcc_cv_as=
 gcc_cv_gas_major_version=
 gcc_cv_gas_minor_version=
@@ -6994,7 +6997,7 @@ fi
 
 # Figure out what linker we will be using.
 echo $ac_n "checking what linker to use""... $ac_c" 1>&6
-echo "configure:6998: checking what linker to use" >&5
+echo "configure:7001: checking what linker to use" >&5
 gcc_cv_ld=
 gcc_cv_gld_major_version=
 gcc_cv_gld_minor_version=
@@ -7087,7 +7090,7 @@ fi
 
 # Figure out what nm we will be using.
 echo $ac_n "checking what nm to use""... $ac_c" 1>&6
-echo "configure:7091: checking what nm to use" >&5
+echo "configure:7094: checking what nm to use" >&5
 if test -x nm$host_exeext; then
        gcc_cv_nm=./nm$host_exeext
 elif test "x$program_prefix" != xNONE; then
@@ -7099,7 +7102,7 @@ echo "$ac_t""$gcc_cv_nm" 1>&6
 
 # Figure out what objdump we will be using.
 echo $ac_n "checking what objdump to use""... $ac_c" 1>&6
-echo "configure:7103: checking what objdump to use" >&5
+echo "configure:7106: checking what objdump to use" >&5
 if test -x objdump$host_exeext; then
        gcc_cv_objdump=./objdump$host_exeext
 elif test "x$program_prefix" != xNONE; then
@@ -7111,7 +7114,7 @@ echo "$ac_t""$gcc_cv_objdump" 1>&6
 
 # Figure out what assembler alignment features are present.
 echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:7115: checking assembler alignment features" >&5
+echo "configure:7118: checking assembler alignment features" >&5
 gcc_cv_as_alignment_features=none
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
        # Gas version 2.6 and later support for .balign and .p2align.
@@ -7159,7 +7162,7 @@ fi
 echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
 
 echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:7163: checking assembler subsection support" >&5
+echo "configure:7166: checking assembler subsection support" >&5
 gcc_cv_as_subsections=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
@@ -7199,7 +7202,7 @@ fi
 echo "$ac_t""$gcc_cv_as_subsections" 1>&6
 
 echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:7203: checking assembler weak support" >&5
+echo "configure:7206: checking assembler weak support" >&5
 gcc_cv_as_weak=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 2 -o "$gcc_cv_gas_major_version" -gt 2; then
@@ -7222,7 +7225,7 @@ fi
 echo "$ac_t""$gcc_cv_as_weak" 1>&6
 
 echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:7226: checking assembler hidden support" >&5
+echo "configure:7229: checking assembler hidden support" >&5
 gcc_cv_as_hidden=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2    \
@@ -7294,7 +7297,7 @@ esac
 
 
 echo $ac_n "checking assembler leb128 support""... $ac_c" 1>&6
-echo "configure:7298: checking assembler leb128 support" >&5
+echo "configure:7301: checking assembler leb128 support" >&5
 gcc_cv_as_leb128=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 11 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
@@ -7339,7 +7342,7 @@ fi
 echo "$ac_t""$gcc_cv_as_leb128" 1>&6
 
 echo $ac_n "checking assembler eh_frame optimization""... $ac_c" 1>&6
-echo "configure:7343: checking assembler eh_frame optimization" >&5
+echo "configure:7346: checking assembler eh_frame optimization" >&5
 gcc_cv_as_eh_frame=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 12 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
@@ -7420,7 +7423,7 @@ fi
 echo "$ac_t""$gcc_cv_as_eh_frame" 1>&6
 
 echo $ac_n "checking assembler section merging support""... $ac_c" 1>&6
-echo "configure:7424: checking assembler section merging support" >&5
+echo "configure:7427: checking assembler section merging support" >&5
 gcc_cv_as_shf_merge=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
   if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 12 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
@@ -7443,7 +7446,7 @@ fi
 echo "$ac_t""$gcc_cv_as_shf_merge" 1>&6
 
 echo $ac_n "checking assembler thread-local storage support""... $ac_c" 1>&6
-echo "configure:7447: checking assembler thread-local storage support" >&5
+echo "configure:7450: checking assembler thread-local storage support" >&5
 gcc_cv_as_tls=no
 conftest_s=
 tls_first_major=
@@ -7551,7 +7554,7 @@ case "$target" in
   # All TARGET_ABI_OSF targets.
   alpha*-*-osf* | alpha*-*-linux* | alpha*-*-*bsd*)
     echo $ac_n "checking assembler supports explicit relocations""... $ac_c" 1>&6
-echo "configure:7539: checking assembler supports explicit relocations" >&5
+echo "configure:7542: checking assembler supports explicit relocations" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_explicit_relocs'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7601,7 +7604,7 @@ EOF
     ;;
   sparc*-*-*)
     echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:7589: checking assembler .register pseudo-op support" >&5
+echo "configure:7592: checking assembler .register pseudo-op support" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7629,7 +7632,7 @@ EOF
     fi
 
     echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
-echo "configure:7617: checking assembler supports -relax" >&5
+echo "configure:7620: checking assembler supports -relax" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7657,7 +7660,7 @@ EOF
     fi
 
     echo $ac_n "checking assembler and linker support unaligned pc related relocs""... $ac_c" 1>&6
-echo "configure:7645: checking assembler and linker support unaligned pc related relocs" >&5
+echo "configure:7648: checking assembler and linker support unaligned pc related relocs" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7684,7 +7687,7 @@ EOF
     fi
 
     echo $ac_n "checking assembler and linker support unaligned pc related relocs against hidden symbols""... $ac_c" 1>&6
-echo "configure:7672: checking assembler and linker support unaligned pc related relocs against hidden symbols" >&5
+echo "configure:7675: checking assembler and linker support unaligned pc related relocs against hidden symbols" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel_hidden'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7724,7 +7727,7 @@ EOF
     fi
 
     echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:7713: checking for assembler offsetable %lo() support" >&5
+echo "configure:7715: checking for assembler offsetable %lo() support" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7763,7 +7766,7 @@ EOF
 
   i[34567]86-*-* | x86_64-*-*)
     echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:7753: checking assembler instructions" >&5
+echo "configure:7754: checking assembler instructions" >&5
     gcc_cv_as_instructions=
     if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
       if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2; then
@@ -7790,7 +7793,7 @@ EOF
     echo "$ac_t""$gcc_cv_as_instructions" 1>&6
 
     echo $ac_n "checking assembler GOTOFF in data directives""... $ac_c" 1>&6
-echo "configure:7780: checking assembler GOTOFF in data directives" >&5
+echo "configure:7781: checking assembler GOTOFF in data directives" >&5
     gcc_cv_as_gotoff_in_data=no
     if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x
     then
@@ -7820,7 +7823,7 @@ EOF
 esac
 
 echo $ac_n "checking assembler dwarf2 debug_line support""... $ac_c" 1>&6
-echo "configure:7810: checking assembler dwarf2 debug_line support" >&5
+echo "configure:7811: checking assembler dwarf2 debug_line support" >&5
 gcc_cv_as_dwarf2_debug_line=no
 # ??? Not all targets support dwarf2 debug_line, even within a version
 # of gas.  Moreover, we need to emit a valid instruction to trigger any
@@ -7876,7 +7879,7 @@ fi
 echo "$ac_t""$gcc_cv_as_dwarf2_debug_line" 1>&6
 
 echo $ac_n "checking assembler --gdwarf2 support""... $ac_c" 1>&6
-echo "configure:7866: checking assembler --gdwarf2 support" >&5
+echo "configure:7867: checking assembler --gdwarf2 support" >&5
 gcc_cv_as_gdwarf2_flag=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x;
 then
@@ -7905,7 +7908,7 @@ fi
 echo "$ac_t""$gcc_cv_as_gdwarf2_flag" 1>&6
 
 echo $ac_n "checking assembler --gstabs support""... $ac_c" 1>&6
-echo "configure:7895: checking assembler --gstabs support" >&5
+echo "configure:7896: checking assembler --gstabs support" >&5
 gcc_cv_as_gstabs_flag=no
 if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x;
 then
@@ -7933,7 +7936,7 @@ fi
 echo "$ac_t""$gcc_cv_as_gstabs_flag" 1>&6
 
 echo $ac_n "checking linker PT_GNU_EH_FRAME support""... $ac_c" 1>&6
-echo "configure:7923: checking linker PT_GNU_EH_FRAME support" >&5
+echo "configure:7924: checking linker PT_GNU_EH_FRAME support" >&5
 gcc_cv_ld_eh_frame_hdr=no
 if test x$gcc_cv_gld_major_version != x -a x$gcc_cv_gld_minor_version != x; then
   if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 12 -o "$gcc_cv_gld_major_version" -gt 2 && grep 'EMUL = elf' ../ld/Makefile > /dev/null; then
@@ -7957,7 +7960,7 @@ echo "$ac_t""$gcc_cv_ld_eh_frame_hdr" 1>&6
 case "$target" in
   mips*-*-*)
     echo $ac_n "checking whether libgloss uses STARTUP directives consistently""... $ac_c" 1>&6
-echo "configure:7947: checking whether libgloss uses STARTUP directives consistently" >&5
+echo "configure:7948: checking whether libgloss uses STARTUP directives consistently" >&5
     gcc_cv_mips_libgloss_startup=no
     gcc_cv_libgloss_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/libgloss
     if test "x$exec_prefix" = xNONE; then
@@ -8161,7 +8164,7 @@ fi
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:8151: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:8152: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"

diff --git a/gcc/configure.in b/gcc/configure.in
index 7e01748..c67229f 100644 (file)
--- a/gcc/configure.in
+++ b/gcc/configure.in
@@ -697,7 +697,7 @@ saved_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS -I${srcdir} -I${srcdir}/../include"
 gcc_AC_CHECK_DECLS(getenv atol sbrk abort atof getcwd getwd \
        strsignal putc_unlocked fputs_unlocked fwrite_unlocked \
-        fprintf_unlocked strstr errno \
+        fprintf_unlocked strstr errno vasprintf \
        malloc realloc calloc free basename getopt clock, , ,[
 #include "ansidecl.h"
 #include "system.h"])

diff --git a/gcc/fixinc/fixincl.x b/gcc/fixinc/fixincl.x
index a17fa9b..09fad02 100644 (file)
--- a/gcc/fixinc/fixincl.x
+++ b/gcc/fixinc/fixincl.x
@@ -5,7 +5,7 @@
  * files which are fixed to work correctly with ANSI C and placed in a
  * directory that GNU C will search.
  *
- * This file contains 147 fixup descriptions.
+ * This file contains 148 fixup descriptions.
  *
  * See README for more information.
  *
@@ -2575,6 +2575,43 @@ extern [a-z_]+ mem.*(\n\
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * *
  *
+ *  Description of Libc1_G_Va_List fix
+ */
+tSCC zLibc1_G_Va_ListName[] =
+     "libc1_G_va_list";
+
+/*
+ *  File name selection pattern
+ */
+tSCC zLibc1_G_Va_ListList[] =
+  "|_G_config.h|";
+/*
+ *  Machine/OS name selection pattern
+ */
+tSCC* apzLibc1_G_Va_ListMachs[] = {
+        "*-*-linux*libc1",
+        (const char*)NULL };
+
+/*
+ *  content selection pattern - do fix if pattern found
+ */
+tSCC zLibc1_G_Va_ListSelect0[] =
+       "typedef void \\* _G_va_list;";
+
+#define    LIBC1_G_VA_LIST_TEST_CT  1
+static tTestDesc aLibc1_G_Va_ListTests[] = {
+  { TT_EGREP,    zLibc1_G_Va_ListSelect0, (regex_t*)NULL }, };
+
+/*
+ *  Fix Command Arguments for Libc1_G_Va_List
+ */
+static const char* apzLibc1_G_Va_ListPatch[] = {
+    "format",
+    "typedef __builtin_va_list _G_va_list;",
+    (char*)NULL };
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * *
+ *
  *  Description of Limits_Ifndefs fix
  */
 tSCC zLimits_IfndefsName[] =
@@ -5745,9 +5782,9 @@ static const char* apzX11_SprintfPatch[] = {
  *
  *  List of all fixes
  */
-#define REGEX_COUNT          154
+#define REGEX_COUNT          155
 #define MACH_LIST_SIZE_LIMIT 279
-#define FIX_COUNT            147
+#define FIX_COUNT            148
 
 /*
  *  Enumerate the fixes
@@ -5817,6 +5854,7 @@ typedef enum {
     ISC_OMITS_WITH_STDC_FIXIDX,
     KANDR_CONCAT_FIXIDX,
     LIBC1_IFDEFD_MEMX_FIXIDX,
+    LIBC1_G_VA_LIST_FIXIDX,
     LIMITS_IFNDEFS_FIXIDX,
     LYNX_VOID_INT_FIXIDX,
     LYNXOS_FCNTL_PROTO_FIXIDX,
@@ -6223,6 +6261,11 @@ tFixDesc fixDescList[ FIX_COUNT ] = {
      LIBC1_IFDEFD_MEMX_TEST_CT, FD_MACH_ONLY | FD_SUBROUTINE,
      aLibc1_Ifdefd_MemxTests,   apzLibc1_Ifdefd_MemxPatch, 0 },
 
+  {  zLibc1_G_Va_ListName,    zLibc1_G_Va_ListList,
+     apzLibc1_G_Va_ListMachs,
+     LIBC1_G_VA_LIST_TEST_CT, FD_MACH_ONLY | FD_SUBROUTINE,
+     aLibc1_G_Va_ListTests,   apzLibc1_G_Va_ListPatch, 0 },
+
   {  zLimits_IfndefsName,    zLimits_IfndefsList,
      apzLimits_IfndefsMachs,
      LIMITS_IFNDEFS_TEST_CT, FD_MACH_ONLY | FD_SUBROUTINE,

diff --git a/gcc/fixinc/inclhack.def b/gcc/fixinc/inclhack.def
index 787bcb7..b102a79 100644 (file)
--- a/gcc/fixinc/inclhack.def
+++ b/gcc/fixinc/inclhack.def
@@ -1519,6 +1519,21 @@ fix = {
 
 
 /*
+ *  Fix libc1 _G_va_list definition, used in declarations of several
+ *  more-or-less standard functions, for example vasprintf.
+ */
+fix = {
+    hackname = libc1_G_va_list;
+    files    = _G_config.h;
+    mach     = '*-*-linux*libc1';
+    select   = 'typedef void \* _G_va_list;';
+    c_fix     = format;
+    c_fix_arg = "typedef __builtin_va_list _G_va_list;";
+    test_text = 'typedef __builtin_va_list _G_va_list;';
+};
+
+
+/*
  *  In limits.h, put #ifndefs around things that are supposed to be defined
  *  in float.h to avoid redefinition errors if float.h is included first.
  *  On HP/UX this patch does not work, because on HP/UX limits.h uses