X-Git-Url: http://git.sourceforge.jp/view?p=pf3gnuchains%2Fgcc-fork.git;a=blobdiff_plain;f=configure;h=b204110f118589fbc92d89afd85ffea108104299;hp=871b774e3db4adadd0d2edc4858bb06296e5f58d;hb=01a54e86205fb9f7511a52b4ba44e532484fd7db;hpb=d957c480ac27a47b83b7d3e7b6e5105cdcd18573

diff --git a/configure b/configure
index 871b774e3db..b204110f118 100755
--- a/configure
+++ b/configure
@@ -12,10 +12,10 @@ ac_help=
 ac_default_prefix=/usr/local
 # Any additions from configure.in:
 ac_help="$ac_help
-  --disable-serial-[{host,target,build}-]configure
-                          Don't force sequential configuration of
+  --enable-serial-[{host,target,build}-]configure
+                          Force sequential configuration of
                           sub-packages for the host, target or build
-			  machine, or of any sub-packages at all"
+			  machine, or all sub-packages"
 ac_help="$ac_help
   --enable-maintainer-mode enable make rules and dependencies not useful
                           (and sometimes confusing) to the casual installer"
@@ -658,9 +658,80 @@ test "$program_suffix" != NONE &&
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 
+# Get 'install' or 'install-sh' and its variants.
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:675: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
 # Autoconf M4 include file defining utility macros for complex Canadian
 # cross builds.
 
+ 
+ 
+ 
+ 
+
 ####
 # _NCN_TOOL_PREFIXES:  Some stuff that oughtta be done in AC_CANONICAL_SYSTEM 
 # or AC_INIT.
@@ -723,8 +794,20 @@ progname=$0
 # if PWD already has a value, it is probably wrong.
 if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi
 
-# Export original configure arguments for use by sub-configures.
-TOPLEVEL_CONFIGURE_ARGUMENTS="$progname $@"
+# Export original configure arguments for use by sub-configures.  These
+# will be expanded once by make, and once by the shell, so they need to
+# have '$' quoted for make, and then each argument quoted for the shell.
+# What's more, the 'echo' below might expand backslashes.
+cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+tmp="'$progname'"
+for ac_arg
+do
+  tmp="$tmp '"`echo "$ac_arg" | sed -f conftestsed`
+done
+rm -f conftestsed
+TOPLEVEL_CONFIGURE_ARGUMENTS="$tmp"
 
 
 moveifchange=${srcdir}/move-if-change
@@ -796,7 +879,7 @@ libgcj="target-libffi \
 # these libraries are built for the target environment, and are built after
 # the host libraries and the host tools (which may be a cross compiler)
 #
-target_libs="target-libiberty \
+target_libraries="target-libiberty \
 		target-libgloss \
 		target-newlib \
 		target-libstdc++-v3 \
@@ -804,10 +887,10 @@ target_libs="target-libiberty \
 		${libgcj} \
 		target-libobjc"
 
-# these tools are built using the target libs, and are intended to run only
-# in the target environment
+# these tools are built using the target libraries, and are intended to
+# run only in the target environment
 #
-# note: any program that *uses* libraries that are in the "target_libs"
+# note: any program that *uses* libraries that are in the "target_libraries"
 # list belongs in this list.  those programs are also very likely
 # candidates for the "native_only" list which follows
 #
@@ -822,7 +905,17 @@ target_tools="target-examples target-groff target-gperf target-rda"
 ## ${target_configdirs} is directories we build using the target tools.
 #
 configdirs=`echo ${host_libs} ${host_tools}`
-target_configdirs=`echo ${target_libs} ${target_tools}`
+target_configdirs=`echo ${target_libraries} ${target_tools}`
+
+# Only make build modules if build != host.
+# This should be done more generally, but at the moment it doesn't matter.
+if test ${host_alias} != ${build_alias} ; then
+  # This is the only build module.
+  build_modules=libiberty
+else
+  build_modules=
+fi
+
 
 ################################################################################
 
@@ -839,30 +932,29 @@ else
   is_cross_compiler=yes
 fi	
 
-# We always want to use the same name for this directory, so that dejagnu
-# can reliably find it.
-target_subdir=${target_alias}
+# Find the build and target subdir names.
+ case ${build_alias} in
+  "") build_noncanonical=${build} ;;
+  *) build_noncanonical=${build_alias} ;;
+esac
 
-if test ! -d ${target_subdir} ; then
-  if mkdir ${target_subdir} ; then true
-  else
-    echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${target_subdir}" 1>&2
-    exit 1
-  fi
-fi
+ case ${host_alias} in
+  "") host_noncanonical=${build_noncanonical} ;;
+  *) host_noncanonical=${host_alias} ;;
+esac
 
-build_prefix=build-
-build_subdir=${build_prefix}${build_alias}
+ case ${target_alias} in
+  "") target_noncanonical=${host_noncanonical} ;;
+  *) target_noncanonical=${target_alias} ;;
+esac
 
-if test x"${build_alias}" != x"${host}" ; then
-  if test ! -d ${build_subdir} ; then
-    if mkdir ${build_subdir} ; then true
-    else
-      echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${build_subdir}" 1>&2
-      exit 1
-    fi
-  fi
-fi
+  # Prefix 'build-' so this never conflicts with target_subdir.
+build_subdir="build-${build_noncanonical}"
+# Not really a subdirectory, but here for completeness.
+host_subdir=.
+# No prefix.
+target_subdir=${target_noncanonical}
+   
 
 # Skipdirs are removed silently.
 skipdirs=
@@ -911,7 +1003,8 @@ esac
 
 # If both --with-headers and --with-libs are specified, default to
 # --without-newlib.
-if test x"${with_headers}" != x && test x"${with_libs}" != x ; then
+if test x"${with_headers}" != x && test x"${with_headers} != xno \
+   && test x"${with_libs}" != x && test x"${with_libs} != xno ; then
   if test x"${with_newlib}" = x ; then
     with_newlib=no
   fi
@@ -938,17 +1031,17 @@ case "${host}" in
   hppa*64*-*-*)
     noconfigdirs="$noconfigdirs byacc"
     ;;
-  i[3456]86-*-vsta)
+  i[3456789]86-*-vsta)
     noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
     ;;
-  i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
+  i[3456789]86-*-go32* | i[3456789]86-*-msdosdjgpp*)
     noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
     ;;
-  i[3456]86-*-mingw32*)
+  i[3456789]86-*-mingw32*)
     # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
     noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
     ;;
-  i[3456]86-*-beos*)
+  i[3456789]86-*-beos*)
     noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
     ;;
   *-*-cygwin*)
@@ -988,6 +1081,10 @@ case "${target}" in
   *-*-chorusos)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
+  powerpc-*-darwin*)
+    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+    noconfigdirs="$noconfigdirs target-libobjc"
+    ;;
   *-*-darwin*)
     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
     noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
@@ -1043,13 +1140,16 @@ case "${target}" in
     # newlib is not 64 bit ready
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  alpha*-*-freebsd*)
+  alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   alpha*-*-*)
     # newlib is not 64 bit ready
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
+  am33_2.0-*-linux*)
+    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+    ;;
   sh-*-linux*)
     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
     ;;    
@@ -1108,22 +1208,22 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
     ;;
   cris-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
     ;;
   d10v-*-*)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
   d30v-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj} gdb"
     ;;
   fr30-*-elf*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj} gdb"
     ;;
   frv-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   h8300*-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj} target-libf2c"
     ;;
   h8500-*-*)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c"
@@ -1147,6 +1247,9 @@ case "${target}" in
     # build on HP-UX 10.20.
     noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
     ;;
+  i960-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj} gdb"
+    ;;
   ia64*-*-elf*)
     # No gdb support yet.
     noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
@@ -1155,13 +1258,13 @@ case "${target}" in
     # No gdb or ld support yet.
     noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
     ;;
-  i[3456]86-*-coff | i[3456]86-*-elf)
+  i[3456789]86-*-coff | i[3456789]86-*-elf)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  i[34567]86-*-freebsd*)
+  i[3456789]86-*-freebsd* | i[3456789]86-*-kfreebsd*-gnu)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  i[3456]86-*-linux*)
+  i[3456789]86-*-linux*)
     # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
     # not build java stuff by default.
     case "${target}" in
@@ -1180,13 +1283,13 @@ case "${target}" in
     # if the --with-newlib option has been given, because otherwise
     # 'target-newlib' will appear in skipdirs.
     ;;
-  i[3456]86-*-mingw32*)
+  i[3456789]86-*-mingw32*)
     target_configdirs="$target_configdirs target-mingw"
     noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
 
     # Can't build gdb for mingw32 if not native.
     case "${host}" in
-      i[3456]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
+      i[3456789]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
       *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
          ;;
     esac
@@ -1204,26 +1307,29 @@ case "${target}" in
          ;;
     esac
     ;;    
-  i[3456]86-*-pe)
+  i[3456789]86-*-pe)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
-  i[3456]86-*-sco3.2v5*)
+  i[3456789]86-*-sco3.2v5*)
     # The linker does not yet know about weak symbols in COFF,
     # and is not configured to handle mixed ELF and COFF.
     noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
     ;;
-  i[3456]86-*-sco*)
+  i[3456789]86-*-sco*)
     noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
-  i[3456]86-*-solaris2*)
+  i[3456789]86-*-solaris2*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
-  i[3456]86-*-sysv4*)
+  i[3456789]86-*-sysv4*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
-  i[3456]86-*-beos*)
+  i[3456789]86-*-beos*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
     ;;
+  m32r-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
   m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
     noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
@@ -1310,9 +1416,9 @@ case "${target}" in
     ;;
   sh-*-*)
     case "${host}" in
-      i[3456]86-*-vsta) ;; # don't add gprof back in
-      i[3456]86-*-go32*) ;; # don't add gprof back in
-      i[3456]86-*-msdosdjgpp*) ;; # don't add gprof back in
+      i[3456789]86-*-vsta) ;; # don't add gprof back in
+      i[3456789]86-*-go32*) ;; # don't add gprof back in
+      i[3456789]86-*-msdosdjgpp*) ;; # don't add gprof back in
       *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
     esac
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
@@ -1357,6 +1463,9 @@ case "${target}" in
   vax-*-*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
+  xtensa-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
   ip2k-*-*)
     noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
@@ -1403,24 +1512,24 @@ enable_languages=`echo "${enable_languages}" | sed -e 's/[ 	,][ 	,]*/,/g' -e 's/
 # First scan to see if an enabled language requires some other language.
 # We assume that a given config-lang.in will list all the language
 # front ends it requires, even if some are required indirectly.
-for lang in ${srcdir}/gcc/*/config-lang.in ..
-do
-  case $lang in
+for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+  case ${lang_frag} in
     ..) ;;
     # The odd quoting in the next line works around
     # an apparent bug in bash 1.12 on linux.
     ${srcdir}/gcc/[*]/config-lang.in) ;;
     *)
-      lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ 	]*\).*$,\1,p' $lang`
-      this_lang_requires=`sed -n -e 's,^lang_requires=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_requires=\([^ 	]*\).*$,\1,p' $lang`
-      for other in $this_lang_requires
-      do
+      # From the config-lang.in, get $language, $lang_requires
+      language=
+      lang_requires=
+      . ${lang_frag}
+      for other in ${lang_requires} ; do
         case ,${enable_languages}, in
 	  *,$other,*) ;;
 	  *,all,*) ;;
-	  *,$lang_alias,*)
-	    echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
-	    enable_languages="$enable_languages,$other"
+	  *,$language,*)
+	    echo " \`$other' language required by \`$language'; enabling" 1>&2
+	    enable_languages="${enable_languages},${other}"
 	    ;;
 	esac
       done
@@ -1428,35 +1537,44 @@ do
   esac
 done
 
-subdirs=
-for lang in ${srcdir}/gcc/*/config-lang.in ..
-do
-  case $lang in
+for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+  case ${lang_frag} in
     ..) ;;
     # The odd quoting in the next line works around
     # an apparent bug in bash 1.12 on linux.
     ${srcdir}/gcc/[*]/config-lang.in) ;;
     *)
-      lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ 	]*\).*$,\1,p' $lang`
-      this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^ 	]*\).*$,\1,p' $lang`
-      this_lang_dirs=`sed -n -e 's,^lang_dirs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_dirs=\([^ 	]*\).*$,\1,p' $lang`
-      build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^ 	]*\).*$,\1,p' $lang`
-      if test "x$lang_alias" = x
-         then
-        echo "$lang doesn't set \$language." 1>&2
+      # From the config-lang.in, get $language, $target_libs, 
+      # $lang_dirs, and $build_by_default
+      language=
+      target_libs=
+      lang_dirs=
+      build_by_default=
+      . ${lang_frag}
+      if test "x$language" = x ; then
+        echo "${lang_frag} doesn't set \$language." 1>&2
         exit 1
       fi
-      case ${build_by_default},${enable_languages}, in
-        *,$lang_alias,*) add_this_lang=yes ;;
-        no,*) add_this_lang=no ;;
-        *,all,*) add_this_lang=yes ;;
+      case ,${enable_languages}, in
+        *,${language},*)
+          # Language was explicitly selected; include it.
+          add_this_lang=yes
+          ;;
+        *,all,*)
+          # 'all' was selected; include 'default' languages.
+          case ${build_by_default} in
+            no) add_this_lang=no ;;
+            *) add_this_lang=yes ;;
+          esac 
+          ;;
         *) add_this_lang=no ;;
       esac
-      if test x"${add_this_lang}" = xyes; then
-        eval target_libs='"$target_libs "'\"$this_lang_libs\"
-      else
-        eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\"
-      fi
+      case ${add_this_lang} in
+        no)
+          # Remove language-dependent dirs.
+          eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+          ;;
+      esac
       ;;
   esac
 done
@@ -1570,7 +1688,7 @@ copy_dirs=
 
 # Handle --with-headers=XXX.  If the value is not "yes", the contents of
 # the named directory are copied to $(tooldir)/sys-include.
-if test x"${with_headers}" != x ; then
+if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
   if test x${is_cross_compiler} = xno ; then
     echo 1>&2 '***' --with-headers is only supported when cross compiling
     exit 1
@@ -1587,7 +1705,7 @@ fi
 # Handle --with-libs=XXX.  If the value is not "yes", the contents of
 # the name directories are copied to $(tooldir)/lib.  Multiple directories
 # are permitted.
-if test x"${with_libs}" != x ; then
+if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
   if test x${is_cross_compiler} = xno ; then
     echo 1>&2 '***' --with-libs is only supported when cross compiling
     exit 1
@@ -1707,19 +1825,19 @@ case "${host}" in
   i370-ibm-opened*)
     tentative_cc="c89"
     ;;
-  i[3456]86-*-sysv5*)
+  i[3456789]86-*-sysv5*)
     host_makefile_frag="config/mh-sysv5"
     ;;
-  i[3456]86-*-dgux*)
+  i[3456789]86-*-dgux*)
     tentative_cc="gcc -Wall -ansi -D__using_DGUX"
     host_makefile_frag="config/mh-dgux386"
     ;;
-  i[3456]86-ncr-sysv4.3*)
+  i[3456789]86-ncr-sysv4.3*)
     # The MetaWare compiler will generate a copyright message unless you
     # turn it off by adding the -Hnocopyr flag.
     tentative_cc="cc -Hnocopyr"
     ;;
-  i[3456]86-ncr-sysv4*)
+  i[3456789]86-ncr-sysv4*)
     # for an NCR 3000 (i486/SVR4) system.
     # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
     # This compiler not only emits obnoxious copyright messages every time
@@ -1728,21 +1846,21 @@ case "${host}" in
     tentative_cc="/usr/ccs/ATT/cc"
     host_makefile_frag="config/mh-ncr3000"
     ;;
-  i[3456]86-*-sco3.2v5*)
+  i[3456789]86-*-sco3.2v5*)
     ;;
-  i[3456]86-*-sco*)
+  i[3456789]86-*-sco*)
     # The native C compiler botches some simple uses of const.  Unfortunately,
     # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
     tentative_cc="cc -Dconst="
     host_makefile_frag="config/mh-sco"
     ;;
-  i[3456]86-*-udk*)
+  i[3456789]86-*-udk*)
     host_makefile_frag="config/mh-sysv5"
     ;;
-  i[3456]86-*-solaris2*)
+  i[3456789]86-*-solaris2*)
     host_makefile_frag="config/mh-sysv4"
     ;;
-  i[3456]86-*-msdosdjgpp*)
+  i[3456789]86-*-msdosdjgpp*)
     host_makefile_frag="config/mh-djgpp"
     ;;
   *-cygwin*)
@@ -1792,7 +1910,7 @@ extra_nmflags_for_target=
 extra_ranlibflags_for_target=
 target_makefile_frag=/dev/null
 case "${target}" in
-  i[3456]86-*-netware*)
+  i[3456789]86-*-netware*)
     target_makefile_frag="config/mt-netware"
     ;;
   powerpc-*-netware*)
@@ -1884,10 +2002,6 @@ fi
 # Default to using --with-stabs for certain targets.
 if test x${with_stabs} = x ; then
   case "${target}" in
-  mips*-*-irix6*o32)
-    with_stabs=yes;
-    extra_host_args="${extra_host_args} --with-stabs"
-    ;;
   mips*-*-irix6*)
     ;;
   mips*-*-* | alpha*-*-osf*)
@@ -1926,7 +2040,7 @@ fi
 
 # Some systems (e.g., one of the i386-aix systems the gas testers are
 # using) don't handle "\$" correctly, so don't use it here.
-tooldir='$(exec_prefix)'/${target_alias}
+tooldir='${exec_prefix}'/${target_alias}
 build_tooldir=${tooldir}
 
 # Generate a default definition for YACC.  This is used if the makefile can't
@@ -2264,59 +2378,14 @@ esac
 target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
 
 # This is the final value for target_configdirs.  configdirs already
-# has its final value.  It's time to create some lists of valid targets.
-
-# While at that, we remove Makefiles if we were started for recursive
-# configuration, such that the top-level Makefile reconfigures them,
-# like we used to do when configure itself was recursive.
+# has its final value, as does build_modules.  It's time to create some 
+# lists of valid targets.
 
 all_build_modules=
 configure_build_modules=
-# Only make build modules if build != host.
-# This should be done more generally, but at the moment it doesn't matter.
-if test ${host_alias} != ${build_alias} ; then
-  for module in libiberty ; do
-    all_build_modules=all-build-${module}
-    configure_build_modules=configure-build-${module}
-    if test -z "${no_recursion}" \
-       && test -f ${build_subdir}/${module}/Makefile; then
-      echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
-      rm -f ${build_subdir}/${module}/Makefile
-    fi
-  done
-fi
-
-all_host_modules=
-check_host_modules=
-install_host_modules=
-configure_host_modules=
-for module in ${configdirs} ; do
-  all_host_modules="${all_host_modules} all-${module}"
-  check_host_modules="${check_host_modules} check-${module}"
-  install_host_modules="${install_host_modules} install-${module}"
-  configure_host_modules="${configure_host_modules} configure-${module}"
-  if test -z "${no_recursion}" \
-     && test -f ${module}/Makefile; then
-    echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
-    rm -f ${module}/Makefile
-  fi
-done
-install_host_modules_nogcc=`echo "${install_host_modules}" | sed -e 's/install-gcc//g'`
-
-all_target_modules=
-check_target_modules=
-install_target_modules=
-configure_target_modules=
-for module in ${target_configdirs} ; do
-  all_target_modules="${all_target_modules} all-target-${module}"
-  check_target_modules="${check_target_modules} check-target-${module}"
-  install_target_modules="${install_target_modules} install-target-${module}"
-  configure_target_modules="${configure_target_modules} configure-target-${module}"
-  if test -z "${no_recursion}" \
-     && test -f ${target_subdir}/${module}/Makefile; then
-    echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
-    rm -f ${target_subdir}/${module}/Makefile
-  fi
+for module in ${build_modules} ; do
+  all_build_modules=all-build-${module}
+  configure_build_modules=configure-build-${module}
 done
 
 # Determine whether gdb needs tk/tcl or not.
@@ -2346,13 +2415,50 @@ case "$enable_gdbtk" in
 esac
 
 # Create the 'maybe dependencies'.  This uses a temporary file.
+
+# While at that, we remove Makefiles if we were started for recursive
+# configuration, so that the top-level Makefile reconfigures them,
+# like we used to do when configure itself was recursive.
 rm -f maybedep.tmp
 echo '# maybedep.tmp' > maybedep.tmp
-for item in ${all_build_modules} ${all_host_modules} ${all_target_modules} \
-	${install_host_modules} ${install_target_modules} \
-	${configure_build_modules} ${configure_host_modules} ${configure_target_modules} \
-	; do
-  echo "maybe-${item}: ${item}" >> maybedep.tmp
+
+# Make-targets which may need maybe dependencies.
+mts="configure all install check clean distclean dvi info install-info"
+mts="${mts} installcheck mostlyclean maintainer-clean TAGS"
+
+# Loop over modules and make-targets.
+for module in ${build_modules} ; do
+  if test -z "${no_recursion}" \
+     && test -f ${build_subdir}/${module}/Makefile; then
+    echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
+    rm -f ${build_subdir}/${module}/Makefile
+  fi
+  for mt in ${mts} ; do
+    case ${mt} in
+      install) ;; # No installing build modules.
+      *) echo "maybe-${mt}-build-${module}: ${mt}-build-${module}" >> maybedep.tmp ;;
+    esac
+  done
+done
+for module in ${configdirs} ; do
+  if test -z "${no_recursion}" \
+     && test -f ${module}/Makefile; then
+    echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
+    rm -f ${module}/Makefile
+  fi
+  for mt in ${mts} ; do
+    echo "maybe-${mt}-${module}: ${mt}-${module}" >> maybedep.tmp
+  done
+done
+for module in ${target_configdirs} ; do
+  if test -z "${no_recursion}" \
+     && test -f ${target_subdir}/${module}/Makefile; then
+    echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
+    rm -f ${target_subdir}/${module}/Makefile
+  fi
+  for mt in ${mts} ; do
+    echo "maybe-${mt}-target-${module}: ${mt}-target-${module}" >> maybedep.tmp
+  done
 done
 maybe_dependencies=maybedep.tmp
 
@@ -2366,13 +2472,20 @@ if test "${enable_serial_configure+set}" = set; then
 fi
 
 
+case ${enable_serial_configure} in
+  yes)
+    enable_serial_build_configure=yes
+    enable_serial_host_configure=yes
+    enable_serial_target_configure=yes
+    ;;
+esac
+
 # These force 'configure's to be done one at a time, to avoid problems
 # with contention over a shared config.cache.
 rm -f serdep.tmp
 echo '# serdep.tmp' > serdep.tmp
 olditem=
-test "x${enable_serial_configure}" = xno ||
-test "x${enable_serial_build_configure}" = xno ||
+test "x${enable_serial_build_configure}" = xyes &&
 for item in ${build_configdirs} ; do
   case ${olditem} in
     "") ;;
@@ -2381,8 +2494,7 @@ for item in ${build_configdirs} ; do
   olditem=${item}
 done
 olditem=
-test "x${enable_serial_configure}" = xno ||
-test "x${enable_serial_host_configure}" = xno ||
+test "x${enable_serial_host_configure}" = xyes &&
 for item in ${configdirs} ; do
   case ${olditem} in
     "") ;;
@@ -2391,8 +2503,7 @@ for item in ${configdirs} ; do
   olditem=${item}
 done
 olditem=
-test "x${enable_serial_configure}" = xno ||
-test "x${enable_serial_target_configure}" = xno ||
+test "x${enable_serial_target_configure}" = xyes &&
 for item in ${target_configdirs} ; do
   case ${olditem} in
     "") ;;
@@ -2406,20 +2517,24 @@ serialization_dependencies=serdep.tmp
 # Base args.  Strip norecursion, cache-file, srcdir, host, build,
 # target and nonopt.  These are the ones we might not want to pass
 # down to subconfigures.
-baseargs=`echo " ${ac_configure_args} " | \
-	sed -e 's/ --no[^ ]* / /' \
-	    -e 's/ --c[a-z-]*[= ][^ ]* / /' \
-	    -e 's/ --sr[a-z-]*[= ][^ ]* / /' \
-	    -e 's/ --ho[a-z-]*[= ][^ ]* / /' \
-	    -e 's/ --bu[a-z-]*[= ][^ ]* / /' \
-	    -e 's/ --t[a-z-]*[= ][^ ]* / /' \
-	    -e 's/ -cache-file[= ][^ ]* / /' \
-	    -e 's/ -srcdir[= ][^ ]* / /' \
-	    -e 's/ -host[= ][^ ]* / /' \
-	    -e 's/ -build[= ][^ ]* / /' \
-	    -e 's/ -target[= ][^ ]* / /' \
-	    -e "s/ [[^' -][^ ]*] / /" \
-	    -e 's/^ *//;s/ *$//'`
+cat <<\EOF_SED > conftestsed
+s/ --no[^ ]* / /
+s/ --c[a-z-]*[= ][^ ]* / /
+s/ --sr[a-z-]*[= ][^ ]* / /
+s/ --ho[a-z-]*[= ][^ ]* / /
+s/ --bu[a-z-]*[= ][^ ]* / /
+s/ --t[a-z-]*[= ][^ ]* / /
+s/ -cache-file[= ][^ ]* / /
+s/ -srcdir[= ][^ ]* / /
+s/ -host[= ][^ ]* / /
+s/ -build[= ][^ ]* / /
+s/ -target[= ][^ ]* / /
+s/ [^' -][^ ]* / /
+s/^ *//;s/ *$//
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+baseargs=`echo " ${ac_configure_args} " | sed -f conftestsed`
+rm -f conftestsed
 
 # For the build-side libraries, we just need to pretend we're native,
 # and not use the same cache file.  Multilibs are neither needed nor
@@ -2515,7 +2630,7 @@ case " $target_configdirs " in
    fi
 
    case "${target}-${is_cross_compiler}" in
-   i[3456]86-*-linux*-no)
+   i[3456789]86-*-linux*-no)
       # Here host == target, so we don't need to build gcc,
       # so we don't want to discard standard headers.
       FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
@@ -2570,11 +2685,13 @@ fi
 GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
 
 # Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
 raw_libstdcxx_flags=' -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
 
 if test "x${CXX_FOR_TARGET+set}" = xset; then
-  :
+  if test "x${RAW_CXX_FOR_TARGET+set}" != xset; then
+    RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
+  fi
 elif test -d ${srcdir}/gcc; then
   # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
   # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
@@ -2642,25 +2759,14 @@ ospace_frag=${srcdir}/${ospace_frag}
 
 
 
-
 # Host module lists & subconfigure args.
 
 
 
-
-
-
-
-
 # Target module lists & subconfigure args.
 
 
 
-
-
-
-
-
 # Build tools.
 
 
@@ -2679,7 +2785,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
   # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2687: checking for $ac_word" >&5
+echo "configure:2789: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2712,7 +2818,7 @@ if test -z "$ac_cv_prog_AR" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2720: checking for $ac_word" >&5
+echo "configure:2822: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2751,7 +2857,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2759: checking for $ac_word" >&5
+echo "configure:2861: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2784,7 +2890,7 @@ if test -z "$ac_cv_prog_AS" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2792: checking for $ac_word" >&5
+echo "configure:2894: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2823,7 +2929,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2831: checking for $ac_word" >&5
+echo "configure:2933: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2856,7 +2962,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2864: checking for $ac_word" >&5
+echo "configure:2966: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2895,7 +3001,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2903: checking for $ac_word" >&5
+echo "configure:3005: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2928,7 +3034,7 @@ if test -z "$ac_cv_prog_LD" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2936: checking for $ac_word" >&5
+echo "configure:3038: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2967,7 +3073,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2975: checking for $ac_word" >&5
+echo "configure:3077: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3000,7 +3106,7 @@ if test -z "$ac_cv_prog_NM" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3008: checking for $ac_word" >&5
+echo "configure:3110: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3039,7 +3145,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3047: checking for $ac_word" >&5
+echo "configure:3149: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3072,7 +3178,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3080: checking for $ac_word" >&5
+echo "configure:3182: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3111,7 +3217,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3119: checking for $ac_word" >&5
+echo "configure:3221: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3144,7 +3250,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3152: checking for $ac_word" >&5
+echo "configure:3254: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3183,7 +3289,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3191: checking for $ac_word" >&5
+echo "configure:3293: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3216,7 +3322,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then
     # Extract the first word of "objcopy", so it can be a program name with args.
 set dummy objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3224: checking for $ac_word" >&5
+echo "configure:3326: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3255,7 +3361,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3263: checking for $ac_word" >&5
+echo "configure:3365: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3288,7 +3394,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then
     # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3296: checking for $ac_word" >&5
+echo "configure:3398: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3336,7 +3442,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3344: checking for $ac_word" >&5
+echo "configure:3446: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3369,7 +3475,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3377: checking for $ac_word" >&5
+echo "configure:3479: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3408,7 +3514,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3416: checking for $ac_word" >&5
+echo "configure:3518: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3441,7 +3547,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3449: checking for $ac_word" >&5
+echo "configure:3551: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3480,7 +3586,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3488: checking for $ac_word" >&5
+echo "configure:3590: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3513,7 +3619,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3521: checking for $ac_word" >&5
+echo "configure:3623: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3552,7 +3658,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3560: checking for $ac_word" >&5
+echo "configure:3662: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3585,7 +3691,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3593: checking for $ac_word" >&5
+echo "configure:3695: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3624,7 +3730,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3632: checking for $ac_word" >&5
+echo "configure:3734: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3657,7 +3763,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3665: checking for $ac_word" >&5
+echo "configure:3767: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3696,7 +3802,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3704: checking for $ac_word" >&5
+echo "configure:3806: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3729,7 +3835,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3737: checking for $ac_word" >&5
+echo "configure:3839: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3768,7 +3874,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3776: checking for $ac_word" >&5
+echo "configure:3878: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3801,7 +3907,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3809: checking for $ac_word" >&5
+echo "configure:3911: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3868,7 +3974,7 @@ RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:3876: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:3978: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -4000,6 +4106,7 @@ do
 done
 
 ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
 
 trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
 EOF
@@ -4048,7 +4155,13 @@ s%@build_alias@%$build_alias%g
 s%@build_cpu@%$build_cpu%g
 s%@build_vendor@%$build_vendor%g
 s%@build_os@%$build_os%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g
+s%@build_subdir@%$build_subdir%g
+s%@host_subdir@%$host_subdir%g
+s%@target_subdir@%$target_subdir%g
 /@maybe_dependencies@/r $maybe_dependencies
 s%@maybe_dependencies@%%g
 /@serialization_dependencies@/r $serialization_dependencies
@@ -4073,24 +4186,13 @@ s%@build_tooldir@%$build_tooldir%g
 s%@GDB_TK@%$GDB_TK%g
 s%@gxx_include_dir@%$gxx_include_dir%g
 s%@libstdcxx_incdir@%$libstdcxx_incdir%g
-s%@build_subdir@%$build_subdir%g
 s%@build_configargs@%$build_configargs%g
 s%@configure_build_modules@%$configure_build_modules%g
 s%@all_build_modules@%$all_build_modules%g
 s%@host_configargs@%$host_configargs%g
 s%@configdirs@%$configdirs%g
-s%@configure_host_modules@%$configure_host_modules%g
-s%@all_host_modules@%$all_host_modules%g
-s%@check_host_modules@%$check_host_modules%g
-s%@install_host_modules@%$install_host_modules%g
-s%@install_host_modules_nogcc@%$install_host_modules_nogcc%g
-s%@target_subdir@%$target_subdir%g
 s%@target_configargs@%$target_configargs%g
 s%@target_configdirs@%$target_configdirs%g
-s%@configure_target_modules@%$configure_target_modules%g
-s%@all_target_modules@%$all_target_modules%g
-s%@check_target_modules@%$check_target_modules%g
-s%@install_target_modules@%$install_target_modules%g
 s%@BISON@%$BISON%g
 s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
 s%@LEX@%$LEX%g
@@ -4221,6 +4323,10 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
     top_srcdir="$ac_dots$ac_given_srcdir" ;;
   esac
 
+  case "$ac_given_INSTALL" in
+  [/$]*) INSTALL="$ac_given_INSTALL" ;;
+  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+  esac
 
   echo creating "$ac_file"
   rm -f "$ac_file"
@@ -4236,6 +4342,7 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
 s%@configure_input@%$configure_input%g
 s%@srcdir@%$srcdir%g
 s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
 " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
 fi; done
 rm -f conftest.s*