X-Git-Url: http://git.sourceforge.jp/view?p=pf3gnuchains%2Fgcc-fork.git;a=blobdiff_plain;f=configure;h=32e4e9c026ee4bf7ec4061f9c80ab163f8056e96;hp=2101f6b00de862bd479e984bbfa1bc0cfb88c563;hb=e23e7a9155a79d326a25567faa2d6b870d5f3423;hpb=d7441b0dfad1f42a4343dd48dd759eee73044703

diff --git a/configure b/configure
index 2101f6b00de..32e4e9c026e 100755
--- a/configure
+++ b/configure
@@ -27,7 +27,7 @@ ac_help="$ac_help
   --with-build-sysroot=sysroot
                           use sysroot as the system root during the build"
 ac_help="$ac_help
-  --enable-bootstrap[=lean]     Enable bootstrapping [no]"
+  --enable-bootstrap           Enable bootstrapping [yes if native build]"
 ac_help="$ac_help
   --enable-serial-[{host,target,build}-]configure
                           Force sequential configuration of
@@ -881,7 +881,7 @@ build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fix
 
 # these libraries are used by various programs built for the host environment
 #
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber"
 
 # these tools are built for the host environment
 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
@@ -909,7 +909,8 @@ target_libraries="target-libiberty \
 		target-libgfortran \
 		${libgcj} \
 		target-libobjc \
-		target-libada"
+		target-libada \
+		target-libgomp"
 
 # these tools are built using the target libraries, and are intended to
 # run only in the target environment
@@ -1133,7 +1134,7 @@ no)
     ;;
 "")
     case "${target}" in
-    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
+    *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
         # Enable libmudflap by default in GNU and friends.
 	;;
     *-*-freebsd*)
@@ -1146,6 +1147,30 @@ no)
     esac
 esac
 
+# Allow --disable-libgomp to exclude target-libgomp
+case $enable_libgomp in
+yes)
+    ;;
+no)
+    noconfigdirs="$noconfigdirs target-libgomp"
+    ;;
+"")
+    # Enable libgomp by default on hosted POSIX systems.
+    case "${target}" in
+    *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+	;;
+    *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
+	;;
+    *-*-solaris2* | *-*-sysv4* | *-*-irix* | *-*-osf* | *-*-hpux*)
+	;;
+    *-*-darwin*)
+	;;
+    *)
+	noconfigdirs="$noconfigdirs target-libgomp"
+	;;
+    esac
+esac
+
 
 case "${target}" in
   *-*-chorusos)
@@ -1267,6 +1292,10 @@ case "${target}" in
   arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
     noconfigdirs="$noconfigdirs target-libffi target-qthreads"
     ;;
+  arm*-*-linux-gnueabi)
+    noconfigdirs="$noconfigdirs target-libffi target-qthreads"
+    noconfigdirs="$noconfigdirs target-libjava target-libobjc"
+    ;;
   arm*-*-symbianelf*)
     noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
     ;;
@@ -1290,7 +1319,7 @@ case "${target}" in
     ;;
   bfin-*-*)
     noconfigdirs="$noconfigdirs target-libgloss gdb"
-    if  x${is_cross_compiler} != xno  ; then
+    if test x${is_cross_compiler} != xno ; then
       target_configdirs="${target_configdirs} target-bsp target-cygmon"
     fi
     ;;
@@ -1471,7 +1500,7 @@ case "${target}" in
   mn10300-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  ms1-*-*)
+  mt-*-*)
     noconfigdirs="$noconfigdirs sim"
     ;;
   powerpc-*-aix*)
@@ -1755,6 +1784,12 @@ case "${host}" in
   powerpc-*-darwin*)
     host_makefile_frag="config/mh-ppc-darwin"
     ;;
+  powerpc-*-aix*)
+    host_makefile_frag="config/mh-ppc-aix"
+    ;;
+  rs6000-*-aix*)
+    host_makefile_frag="config/mh-ppc-aix"
+    ;;
   *-*-lynxos*)
     # /bin/cc is less than useful for our purposes.  Always use GCC
     tentative_cc="/bin/gcc"
@@ -1817,7 +1852,7 @@ else
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1821: checking for $ac_word" >&5
+echo "configure:1856: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1847,7 +1882,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1851: checking for $ac_word" >&5
+echo "configure:1886: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1898,7 +1933,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1902: checking for $ac_word" >&5
+echo "configure:1937: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1930,7 +1965,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1934: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1969: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1941,12 +1976,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1945 "configure"
+#line 1980 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1950: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1972,12 +2007,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1976: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2011: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1981: checking whether we are using GNU C" >&5
+echo "configure:2016: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1986,7 +2021,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1990: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2025: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2005,7 +2040,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2009: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2044: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2072,7 +2107,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}gnatbind", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2076: checking for $ac_word" >&5
+echo "configure:2111: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2104,7 +2139,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "gnatbind", so it can be a program name with args.
 set dummy gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2108: checking for $ac_word" >&5
+echo "configure:2143: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GNATBIND'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2137,7 +2172,7 @@ fi
 fi
 
 echo $ac_n "checking whether compiler driver understands Ada""... $ac_c" 1>&6
-echo "configure:2141: checking whether compiler driver understands Ada" >&5
+echo "configure:2176: checking whether compiler driver understands Ada" >&5
 if eval "test \"`echo '$''{'acx_cv_cc_gcc_supports_ada'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2169,7 +2204,7 @@ else
 fi
 
 echo $ac_n "checking how to compare bootstrapped objects""... $ac_c" 1>&6
-echo "configure:2173: checking how to compare bootstrapped objects" >&5
+echo "configure:2208: checking how to compare bootstrapped objects" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_cmp_skip'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2267,9 +2302,9 @@ saved_CFLAGS="$CFLAGS"
 CFLAGS="$CFLAGS $gmpinc"
 # Check GMP actually works
 echo $ac_n "checking for correct version of gmp.h""... $ac_c" 1>&6
-echo "configure:2271: checking for correct version of gmp.h" >&5
+echo "configure:2306: checking for correct version of gmp.h" >&5
 cat > conftest.$ac_ext <<EOF
-#line 2273 "configure"
+#line 2308 "configure"
 #include "confdefs.h"
 #include "gmp.h"
 int main() {
@@ -2280,7 +2315,7 @@ choke me
 
 ; return 0; }
 EOF
-if { (eval echo configure:2284: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2319: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -2293,12 +2328,12 @@ rm -f conftest*
 
 if test x"$have_gmp" = xyes; then
   echo $ac_n "checking for MPFR""... $ac_c" 1>&6
-echo "configure:2297: checking for MPFR" >&5
+echo "configure:2332: checking for MPFR" >&5
 
   saved_LIBS="$LIBS"
   LIBS="$LIBS $gmplibs"
   cat > conftest.$ac_ext <<EOF
-#line 2302 "configure"
+#line 2337 "configure"
 #include "confdefs.h"
 #include <gmp.h>
 #include <mpfr.h>
@@ -2306,7 +2341,7 @@ int main() {
 mpfr_t n; mpfr_init(n);
 ; return 0; }
 EOF
-if { (eval echo configure:2310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2345: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   echo "$ac_t""yes" 1>&6
 else
@@ -2812,221 +2847,6 @@ esac
 tooldir='${exec_prefix}'/${target_alias}
 build_tooldir=${tooldir}
 
-# Generate default definitions for YACC, M4, LEX and other programs that run
-# on the build machine.  These are used if the Makefile can't locate these
-# programs in objdir.
-MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
-for ac_prog in bison
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2825: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CONFIGURED_BISON"; then
-  ac_cv_prog_CONFIGURED_BISON="$CONFIGURED_BISON" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CONFIGURED_BISON="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_BISON="$ac_cv_prog_CONFIGURED_BISON"
-if test -n "$CONFIGURED_BISON"; then
-  echo "$ac_t""$CONFIGURED_BISON" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_BISON" && break
-done
-test -n "$CONFIGURED_BISON" || CONFIGURED_BISON="$MISSING bison"
-
-for ac_prog in 'bison -y' byacc yacc
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2860: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CONFIGURED_YACC"; then
-  ac_cv_prog_CONFIGURED_YACC="$CONFIGURED_YACC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CONFIGURED_YACC="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_YACC="$ac_cv_prog_CONFIGURED_YACC"
-if test -n "$CONFIGURED_YACC"; then
-  echo "$ac_t""$CONFIGURED_YACC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_YACC" && break
-done
-test -n "$CONFIGURED_YACC" || CONFIGURED_YACC="$MISSING bison -y"
-
-for ac_prog in gm4 gnum4 m4
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2895: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CONFIGURED_M4"; then
-  ac_cv_prog_CONFIGURED_M4="$CONFIGURED_M4" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CONFIGURED_M4="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_M4="$ac_cv_prog_CONFIGURED_M4"
-if test -n "$CONFIGURED_M4"; then
-  echo "$ac_t""$CONFIGURED_M4" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_M4" && break
-done
-test -n "$CONFIGURED_M4" || CONFIGURED_M4="$MISSING m4"
-
-for ac_prog in flex
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2930: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CONFIGURED_FLEX"; then
-  ac_cv_prog_CONFIGURED_FLEX="$CONFIGURED_FLEX" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CONFIGURED_FLEX="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_FLEX="$ac_cv_prog_CONFIGURED_FLEX"
-if test -n "$CONFIGURED_FLEX"; then
-  echo "$ac_t""$CONFIGURED_FLEX" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_FLEX" && break
-done
-test -n "$CONFIGURED_FLEX" || CONFIGURED_FLEX="$MISSING flex"
-
-for ac_prog in flex lex
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2965: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CONFIGURED_LEX"; then
-  ac_cv_prog_CONFIGURED_LEX="$CONFIGURED_LEX" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CONFIGURED_LEX="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_LEX="$ac_cv_prog_CONFIGURED_LEX"
-if test -n "$CONFIGURED_LEX"; then
-  echo "$ac_t""$CONFIGURED_LEX" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_LEX" && break
-done
-test -n "$CONFIGURED_LEX" || CONFIGURED_LEX="$MISSING flex"
-
-for ac_prog in makeinfo
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3000: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CONFIGURED_MAKEINFO"; then
-  ac_cv_prog_CONFIGURED_MAKEINFO="$CONFIGURED_MAKEINFO" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CONFIGURED_MAKEINFO="$ac_prog"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CONFIGURED_MAKEINFO="$ac_cv_prog_CONFIGURED_MAKEINFO"
-if test -n "$CONFIGURED_MAKEINFO"; then
-  echo "$ac_t""$CONFIGURED_MAKEINFO" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-test -n "$CONFIGURED_MAKEINFO" && break
-done
-test -n "$CONFIGURED_MAKEINFO" || CONFIGURED_MAKEINFO="$MISSING makeinfo"
-
-
 # Create a .gdbinit file which runs the one in srcdir
 # and tells GDB to look there for source files.
 
@@ -3129,6 +2949,8 @@ case "$enable_gdbtk" in
     fi
     ;;
 esac
+CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
+INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
 
 # Strip out unwanted targets.
 
@@ -3161,27 +2983,26 @@ esac
 case "$have_compiler:$host:$target:$enable_bootstrap" in
   *:*:*:no) ;;
 
-  # Default behavior.  (We'll) enable bootstrap if we have a compiler
+  # Default behavior.  Enable bootstrap if we have a compiler
   # and we are in a native configuration.
   yes:$build:$build:default)
-    # This will become 'yes'
-    enable_bootstrap=no ;;
+    enable_bootstrap=yes ;;
 
   *:*:*:default)
     enable_bootstrap=no ;;
 
   # We have a compiler and we are in a native configuration, bootstrap is ok
-  yes:$build:$build:yes | yes:$build:$build:lean)
+  yes:$build:$build:yes)
     ;;
 
   # Other configurations, but we have a compiler.  Assume the user knows
   # what he's doing.
-  yes:*:*:yes | yes:*:*:lean)
+  yes:*:*:yes)
     echo "configure: warning: trying to bootstrap a cross compiler" 1>&2
     ;;
 
   # No compiler: if they passed --enable-bootstrap explicitly, fail
-  no:*:*:yes | no:*:*:lean)
+  no:*:*:yes)
     { echo "configure: error: cannot bootstrap without a compiler" 1>&2; exit 1; } ;;
 
   # Fail if wrong command line
@@ -3193,20 +3014,11 @@ esac
 # Adjust the toplevel makefile according to whether bootstrap was selected.
 case "$enable_bootstrap" in
   yes)
-    bootstrap_lean='#'
-    default_target=bootstrap
-    bootstrap_suffix=bootstrap ;;
-  lean)
-    bootstrap_lean=''
-    default_target=bootstrap
     bootstrap_suffix=bootstrap ;;
   no)
-    default_target=all
     bootstrap_suffix=no-bootstrap ;;
 esac
 
-
-
 for module in ${build_configdirs} ; do
   if test -z "${no_recursion}" \
      && test -f ${build_subdir}/${module}/Makefile; then
@@ -3220,10 +3032,13 @@ for module in ${build_configdirs} ; do
 /^@endif build-$module-$bootstrap_suffix\$/d"
 done
 for module in ${configdirs} ; do
-  if test -z "${no_recursion}" \
-     && test -f ${module}/Makefile; then
-    echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
-    rm -f ${module}/Makefile
+  if test -z "${no_recursion}"; then
+    for file in stage*-${module}/Makefile ${module}/Makefile; do
+      if test -f ${file}; then
+	echo 1>&2 "*** removing ${file} to force reconfigure"
+	rm -f ${file}
+      fi
+    done
   fi
   extrasub="$extrasub
 /^@if $module\$/d
@@ -3494,6 +3309,8 @@ done
 
 
 
+
+
 # Build module lists & subconfigure args.
 
 
@@ -3510,113 +3327,451 @@ done
 
 
 
-# Host tools.
-ncn_tool_prefix=
-test -n "$host_alias" && ncn_tool_prefix=$host_alias-
-ncn_target_tool_prefix=
-test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
+# Generate default definitions for YACC, M4, LEX and other programs that run
+# on the build machine.  These are used if the Makefile can't locate these
+# programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
 
- for ncn_progname in ar; do
-  if test -n "$ncn_tool_prefix"; then
-    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+for ac_prog in 'bison -y' byacc yacc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3525: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+echo "configure:3341: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
+  if test -n "$YACC"; then
+  ac_cv_prog_YACC="$YACC" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
   for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ncn_tool_prefix}${ncn_progname}"
+      ac_cv_prog_YACC="$ac_prog"
       break
     fi
   done
   IFS="$ac_save_ifs"
 fi
 fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
+YACC="$ac_cv_prog_YACC"
+if test -n "$YACC"; then
+  echo "$ac_t""$YACC" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
 
-  fi
-  if test -z "$ac_cv_prog_AR" && test $build = $host ; then
-    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
+test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="$MISSING bison -y"
+
+case " $build_configdirs " in
+  *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
+  *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
+esac
+
+for ac_prog in bison
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3556: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+echo "configure:3381: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$AR"; then
-  ac_cv_prog_AR="$AR" # Let the user override the test.
+  if test -n "$BISON"; then
+  ac_cv_prog_BISON="$BISON" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
   for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AR="${ncn_progname}"
+      ac_cv_prog_BISON="$ac_prog"
       break
     fi
   done
   IFS="$ac_save_ifs"
 fi
 fi
-AR="$ac_cv_prog_AR"
-if test -n "$AR"; then
-  echo "$ac_t""$AR" 1>&6
+BISON="$ac_cv_prog_BISON"
+if test -n "$BISON"; then
+  echo "$ac_t""$BISON" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
- 
-  fi
-  test -n "$ac_cv_prog_AR" && break
+
+test -n "$BISON" && break
 done
+test -n "$BISON" || BISON="$MISSING bison"
 
-if test -z "$ac_cv_prog_AR" ; then
-  set dummy ar
-  if test $build = $host ; then
-    AR="$2"
-  else
-    AR="${ncn_tool_prefix}$2"
-  fi
-fi
+case " $build_configdirs " in
+  *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;;
+esac
 
- for ncn_progname in as; do
-  if test -n "$ncn_tool_prefix"; then
-    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+for ac_prog in gm4 gnum4 m4
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3600: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+echo "configure:3420: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
+  if test -n "$M4"; then
+  ac_cv_prog_M4="$M4" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
   for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_AS="${ncn_tool_prefix}${ncn_progname}"
+      ac_cv_prog_M4="$ac_prog"
       break
     fi
   done
   IFS="$ac_save_ifs"
 fi
 fi
-AS="$ac_cv_prog_AS"
-if test -n "$AS"; then
+M4="$ac_cv_prog_M4"
+if test -n "$M4"; then
+  echo "$ac_t""$M4" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$M4" && break
+done
+test -n "$M4" || M4="$MISSING m4"
+
+case " $build_configdirs " in
+  *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;;
+esac
+
+for ac_prog in flex lex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3459: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$LEX"; then
+  ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_LEX="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+LEX="$ac_cv_prog_LEX"
+if test -n "$LEX"; then
+  echo "$ac_t""$LEX" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$LEX" && break
+done
+test -n "$LEX" || LEX="$MISSING flex"
+
+case " $build_configdirs " in
+  *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+  *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;;
+esac
+
+for ac_prog in flex
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3499: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$FLEX"; then
+  ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_FLEX="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+FLEX="$ac_cv_prog_FLEX"
+if test -n "$FLEX"; then
+  echo "$ac_t""$FLEX" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$FLEX" && break
+done
+test -n "$FLEX" || FLEX="$MISSING flex"
+
+case " $build_configdirs " in
+  *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+esac
+
+for ac_prog in makeinfo
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3538: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$MAKEINFO"; then
+  ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_MAKEINFO="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+MAKEINFO="$ac_cv_prog_MAKEINFO"
+if test -n "$MAKEINFO"; then
+  echo "$ac_t""$MAKEINFO" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$MAKEINFO" && break
+done
+test -n "$MAKEINFO" || MAKEINFO="$MISSING makeinfo"
+
+case " $build_configdirs " in
+  *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
+  *)
+
+    # For an installed makeinfo, we require it to be from texinfo 4.2 or
+    # higher, else we use the "missing" dummy.
+    if ${MAKEINFO} --version \
+       | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
+      :
+    else
+      MAKEINFO="$MISSING makeinfo"
+    fi
+    ;;
+
+esac
+
+# FIXME: expect and dejagnu may become build tools?
+
+for ac_prog in expect
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3591: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$EXPECT"; then
+  ac_cv_prog_EXPECT="$EXPECT" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_EXPECT="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+EXPECT="$ac_cv_prog_EXPECT"
+if test -n "$EXPECT"; then
+  echo "$ac_t""$EXPECT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$EXPECT" && break
+done
+test -n "$EXPECT" || EXPECT="expect"
+
+case " $configdirs " in
+  *" expect "*)
+    test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect'
+    ;;
+esac
+
+for ac_prog in runtest
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3632: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RUNTEST"; then
+  ac_cv_prog_RUNTEST="$RUNTEST" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RUNTEST="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+RUNTEST="$ac_cv_prog_RUNTEST"
+if test -n "$RUNTEST"; then
+  echo "$ac_t""$RUNTEST" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$RUNTEST" && break
+done
+test -n "$RUNTEST" || RUNTEST="runtest"
+
+case " $configdirs " in
+  *" dejagnu "*)
+    test $host = $build && RUNTEST='$$r/$(HOST_SUBDIR)/dejagnu/runtest'
+    ;;
+esac
+
+
+# Host tools.
+ncn_tool_prefix=
+test -n "$host_alias" && ncn_tool_prefix=$host_alias-
+ncn_target_tool_prefix=
+test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
+
+ for ncn_progname in ar; do
+  if test -n "$ncn_tool_prefix"; then
+    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3680: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AR="${ncn_tool_prefix}${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+  echo "$ac_t""$AR" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  fi
+  if test -z "$ac_cv_prog_AR" && test $build = $host ; then
+    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3711: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AR="${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+  echo "$ac_t""$AR" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+  fi
+  test -n "$ac_cv_prog_AR" && break
+done
+
+if test -z "$ac_cv_prog_AR" ; then
+  set dummy ar
+  if test $build = $host ; then
+    AR="$2"
+  else
+    AR="${ncn_tool_prefix}$2"
+  fi
+fi
+
+ for ncn_progname in as; do
+  if test -n "$ncn_tool_prefix"; then
+    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3755: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AS="${ncn_tool_prefix}${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
   echo "$ac_t""$AS" 1>&6
 else
   echo "$ac_t""no" 1>&6
@@ -3627,7 +3782,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3631: checking for $ac_word" >&5
+echo "configure:3786: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3671,7 +3826,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3675: checking for $ac_word" >&5
+echo "configure:3830: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3702,7 +3857,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3706: checking for $ac_word" >&5
+echo "configure:3861: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3721,98 +3876,173 @@ else
   IFS="$ac_save_ifs"
 fi
 fi
-DLLTOOL="$ac_cv_prog_DLLTOOL"
-if test -n "$DLLTOOL"; then
-  echo "$ac_t""$DLLTOOL" 1>&6
+DLLTOOL="$ac_cv_prog_DLLTOOL"
+if test -n "$DLLTOOL"; then
+  echo "$ac_t""$DLLTOOL" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+  fi
+  test -n "$ac_cv_prog_DLLTOOL" && break
+done
+
+if test -z "$ac_cv_prog_DLLTOOL" ; then
+  set dummy dlltool
+  if test $build = $host ; then
+    DLLTOOL="$2"
+  else
+    DLLTOOL="${ncn_tool_prefix}$2"
+  fi
+fi
+
+ for ncn_progname in ld; do
+  if test -n "$ncn_tool_prefix"; then
+    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3905: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$LD"; then
+  ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_LD="${ncn_tool_prefix}${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+LD="$ac_cv_prog_LD"
+if test -n "$LD"; then
+  echo "$ac_t""$LD" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  fi
+  if test -z "$ac_cv_prog_LD" && test $build = $host ; then
+    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3936: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$LD"; then
+  ac_cv_prog_LD="$LD" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_LD="${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+LD="$ac_cv_prog_LD"
+if test -n "$LD"; then
+  echo "$ac_t""$LD" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
  
   fi
-  test -n "$ac_cv_prog_DLLTOOL" && break
+  test -n "$ac_cv_prog_LD" && break
 done
 
-if test -z "$ac_cv_prog_DLLTOOL" ; then
-  set dummy dlltool
+if test -z "$ac_cv_prog_LD" ; then
+  set dummy ld
   if test $build = $host ; then
-    DLLTOOL="$2"
+    LD="$2"
   else
-    DLLTOOL="${ncn_tool_prefix}$2"
+    LD="${ncn_tool_prefix}$2"
   fi
 fi
 
- for ncn_progname in ld; do
+ for ncn_progname in lipo; do
   if test -n "$ncn_tool_prefix"; then
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3750: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
+echo "configure:3980: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$LD"; then
-  ac_cv_prog_LD="$LD" # Let the user override the test.
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
   for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_LD="${ncn_tool_prefix}${ncn_progname}"
+      ac_cv_prog_LIPO="${ncn_tool_prefix}${ncn_progname}"
       break
     fi
   done
   IFS="$ac_save_ifs"
 fi
 fi
-LD="$ac_cv_prog_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
+LIPO="$ac_cv_prog_LIPO"
+if test -n "$LIPO"; then
+  echo "$ac_t""$LIPO" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
 
   fi
-  if test -z "$ac_cv_prog_LD" && test $build = $host ; then
+  if test -z "$ac_cv_prog_LIPO" && test $build = $host ; then
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3781: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
+echo "configure:4011: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  if test -n "$LD"; then
-  ac_cv_prog_LD="$LD" # Let the user override the test.
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
 else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
   ac_dummy="$PATH"
   for ac_dir in $ac_dummy; do
     test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_LD="${ncn_progname}"
+      ac_cv_prog_LIPO="${ncn_progname}"
       break
     fi
   done
   IFS="$ac_save_ifs"
 fi
 fi
-LD="$ac_cv_prog_LD"
-if test -n "$LD"; then
-  echo "$ac_t""$LD" 1>&6
+LIPO="$ac_cv_prog_LIPO"
+if test -n "$LIPO"; then
+  echo "$ac_t""$LIPO" 1>&6
 else
   echo "$ac_t""no" 1>&6
 fi
  
   fi
-  test -n "$ac_cv_prog_LD" && break
+  test -n "$ac_cv_prog_LIPO" && break
 done
 
-if test -z "$ac_cv_prog_LD" ; then
-  set dummy ld
+if test -z "$ac_cv_prog_LIPO" ; then
+  set dummy lipo
   if test $build = $host ; then
-    LD="$2"
+    LIPO="$2"
   else
-    LD="${ncn_tool_prefix}$2"
+    LIPO="${ncn_tool_prefix}$2"
   fi
 fi
 
@@ -3821,7 +4051,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3825: checking for $ac_word" >&5
+echo "configure:4055: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3852,7 +4082,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3856: checking for $ac_word" >&5
+echo "configure:4086: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3896,7 +4126,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3900: checking for $ac_word" >&5
+echo "configure:4130: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3927,7 +4157,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3931: checking for $ac_word" >&5
+echo "configure:4161: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3961,12 +4191,82 @@ if test -z "$ac_cv_prog_RANLIB" ; then
   RANLIB=":"
 fi
 
+ for ncn_progname in strip; do
+  if test -n "$ncn_tool_prefix"; then
+    # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4200: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_STRIP="${ncn_tool_prefix}${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+  echo "$ac_t""$STRIP" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  fi
+  if test -z "$ac_cv_prog_STRIP" && test $build = $host ; then
+    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:4231: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_STRIP="${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+  echo "$ac_t""$STRIP" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+  fi
+  test -n "$ac_cv_prog_STRIP" && break
+done
+
+if test -z "$ac_cv_prog_STRIP" ; then
+  STRIP=":"
+fi
+
  for ncn_progname in windres; do
   if test -n "$ncn_tool_prefix"; then
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3970: checking for $ac_word" >&5
+echo "configure:4270: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3997,7 +4297,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4001: checking for $ac_word" >&5
+echo "configure:4301: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4041,7 +4341,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4045: checking for $ac_word" >&5
+echo "configure:4345: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4072,7 +4372,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4076: checking for $ac_word" >&5
+echo "configure:4376: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4116,7 +4416,7 @@ fi
     # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4120: checking for $ac_word" >&5
+echo "configure:4420: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4147,7 +4447,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4151: checking for $ac_word" >&5
+echo "configure:4451: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4192,14 +4492,13 @@ fi
 
 
 
-# Target tools.  Do the tests using the names they may have passed in
-# the environment, then move it to CONFIGURED_*_FOR_TARGET.
+# Target tools.
  for ncn_progname in ar; do
   if test -n "$ncn_target_tool_prefix"; then
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4203: checking for $ac_word" >&5
+echo "configure:4502: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4230,7 +4529,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4234: checking for $ac_word" >&5
+echo "configure:4533: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4274,7 +4573,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4278: checking for $ac_word" >&5
+echo "configure:4577: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4305,7 +4604,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4309: checking for $ac_word" >&5
+echo "configure:4608: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4349,7 +4648,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4353: checking for $ac_word" >&5
+echo "configure:4652: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4380,7 +4679,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4384: checking for $ac_word" >&5
+echo "configure:4683: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4424,7 +4723,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4428: checking for $ac_word" >&5
+echo "configure:4727: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4455,7 +4754,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4459: checking for $ac_word" >&5
+echo "configure:4758: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4499,7 +4798,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4503: checking for $ac_word" >&5
+echo "configure:4802: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4530,7 +4829,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4534: checking for $ac_word" >&5
+echo "configure:4833: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4574,7 +4873,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4578: checking for $ac_word" >&5
+echo "configure:4877: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4605,7 +4904,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4609: checking for $ac_word" >&5
+echo "configure:4908: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4644,7 +4943,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4648: checking for $ac_word" >&5
+echo "configure:4947: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4675,7 +4974,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4679: checking for $ac_word" >&5
+echo "configure:4978: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4719,7 +5018,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4723: checking for $ac_word" >&5
+echo "configure:5022: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4750,7 +5049,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4754: checking for $ac_word" >&5
+echo "configure:5053: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4794,7 +5093,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4798: checking for $ac_word" >&5
+echo "configure:5097: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4825,7 +5124,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4829: checking for $ac_word" >&5
+echo "configure:5128: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4869,7 +5168,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4873: checking for $ac_word" >&5
+echo "configure:5172: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4900,7 +5199,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4904: checking for $ac_word" >&5
+echo "configure:5203: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4944,7 +5243,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4948: checking for $ac_word" >&5
+echo "configure:5247: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4975,7 +5274,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4979: checking for $ac_word" >&5
+echo "configure:5278: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5014,12 +5313,87 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
   fi
 fi
 
+ for ncn_progname in objdump; do
+  if test -n "$ncn_target_tool_prefix"; then
+    # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5322: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$OBJDUMP_FOR_TARGET"; then
+  ac_cv_prog_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_OBJDUMP_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+OBJDUMP_FOR_TARGET="$ac_cv_prog_OBJDUMP_FOR_TARGET"
+if test -n "$OBJDUMP_FOR_TARGET"; then
+  echo "$ac_t""$OBJDUMP_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  fi
+  if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" && test $build = $target ; then
+    # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:5353: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$OBJDUMP_FOR_TARGET"; then
+  ac_cv_prog_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_OBJDUMP_FOR_TARGET="${ncn_progname}"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+OBJDUMP_FOR_TARGET="$ac_cv_prog_OBJDUMP_FOR_TARGET"
+if test -n "$OBJDUMP_FOR_TARGET"; then
+  echo "$ac_t""$OBJDUMP_FOR_TARGET" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ 
+  fi
+  test -n "$ac_cv_prog_OBJDUMP_FOR_TARGET" && break
+done
+
+if test -z "$ac_cv_prog_OBJDUMP_FOR_TARGET" ; then
+  set dummy objdump
+  if test $build = $target ; then
+    OBJDUMP_FOR_TARGET="$2"
+  else
+    OBJDUMP_FOR_TARGET="${ncn_target_tool_prefix}$2"
+  fi
+fi
+
  for ncn_progname in ranlib; do
   if test -n "$ncn_target_tool_prefix"; then
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5023: checking for $ac_word" >&5
+echo "configure:5397: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5050,7 +5424,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5054: checking for $ac_word" >&5
+echo "configure:5428: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5089,7 +5463,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5093: checking for $ac_word" >&5
+echo "configure:5467: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5120,7 +5494,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5124: checking for $ac_word" >&5
+echo "configure:5498: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5164,7 +5538,7 @@ fi
     # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5168: checking for $ac_word" >&5
+echo "configure:5542: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5195,7 +5569,7 @@ fi
     # Extract the first word of "${ncn_progname}", so it can be a program name with args.
 set dummy ${ncn_progname}; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5199: checking for $ac_word" >&5
+echo "configure:5573: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -5235,74 +5609,440 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
 fi
 
 
-CONFIGURED_AR_FOR_TARGET="$AR_FOR_TARGET"
-CONFIGURED_AS_FOR_TARGET="$AS_FOR_TARGET"
-CONFIGURED_CC_FOR_TARGET="$CC_FOR_TARGET"
-CONFIGURED_CXX_FOR_TARGET="$CXX_FOR_TARGET"
-CONFIGURED_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET"
-CONFIGURED_GCC_FOR_TARGET="$GCC_FOR_TARGET"
-CONFIGURED_GCJ_FOR_TARGET="$GCJ_FOR_TARGET"
-CONFIGURED_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET"
-CONFIGURED_LD_FOR_TARGET="$LD_FOR_TARGET"
-CONFIGURED_LIPO_FOR_TARGET="$LIPO_FOR_TARGET"
-CONFIGURED_NM_FOR_TARGET="$NM_FOR_TARGET"
-CONFIGURED_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET"
-CONFIGURED_STRIP_FOR_TARGET="$STRIP_FOR_TARGET"
-CONFIGURED_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET"
-
-
-
-# Fix up target tools.
-if test "x${build}" = "x${host}" ; then
-  # In this case, the newly built tools can and should be used,
-  # so we override the results of the autoconf tests.
-  # This should really only happen when the tools are actually being built,
-  # but that's a further refinement.  The new build scheme, where
-  # tools are built into a structure paralleling where they're installed,
-  # should also eliminate all of this cleanly.
-  AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
-  AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
-  CC_FOR_TARGET="\$(USUAL_CC_FOR_TARGET)"
-  CXX_FOR_TARGET="\$(USUAL_CXX_FOR_TARGET)"
-  RAW_CXX_FOR_TARGET="\$(USUAL_RAW_CXX_FOR_TARGET)"
-  DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
-  GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
-  GCJ_FOR_TARGET="\$(USUAL_GCJ_FOR_TARGET)"
-  GFORTRAN_FOR_TARGET="\$(USUAL_GFORTRAN_FOR_TARGET)"
-  LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
-  LIPO_FOR_TARGET="\$(USUAL_LIPO_FOR_TARGET)"
-  NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
-  RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
-  STRIP_FOR_TARGET="\$(USUAL_STRIP_FOR_TARGET)"
-  WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
-else
-  # Just use the ones we found.
-  AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
-  AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
-  CC_FOR_TARGET="\$(CONFIGURED_CC_FOR_TARGET)"
-  CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
-  RAW_CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)"
-  DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
-  GCC_FOR_TARGET="\$(CONFIGURED_GCC_FOR_TARGET)"
-  GCJ_FOR_TARGET="\$(CONFIGURED_GCJ_FOR_TARGET)"
-  GFORTRAN_FOR_TARGET="\$(CONFIGURED_GFORTRAN_FOR_TARGET)"
-  LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
-  LIPO_FOR_TARGET="\$(CONFIGURED_LIPO_FOR_TARGET)"
-  NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
-  RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
-  STRIP_FOR_TARGET="\$(CONFIGURED_STRIP_FOR_TARGET)"
-  WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"  
+RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
+
+echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
+echo "configure:5616: checking where to find the target ar" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    AR_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ar'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    AR_FOR_TARGET='$(AR)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
+echo "configure:5641: checking where to find the target as" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gas "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gas/as-new'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    AS_FOR_TARGET='$(AS)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
+echo "configure:5666: checking where to find the target cc" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gcc "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    CC_FOR_TARGET='$(CC)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
+echo "configure:5691: checking where to find the target c++" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gcc "*) ;;
+    *) ok=no ;;
+  esac
+  case ,${enable_languages}, in
+    *,c++,*) ;;
+    *) ok=no ;;
+  esac
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    CXX_FOR_TARGET='$(CXX)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
+echo "configure:5719: checking where to find the target c++ for libstdc++" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gcc "*) ;;
+    *) ok=no ;;
+  esac
+  case ,${enable_languages}, in
+    *,c++,*) ;;
+    *) ok=no ;;
+  esac
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    RAW_CXX_FOR_TARGET='$(CXX)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
+echo "configure:5747: checking where to find the target dlltool" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    DLLTOOL_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/dlltool'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    DLLTOOL_FOR_TARGET='$(DLLTOOL)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
+echo "configure:5772: checking where to find the target gcc" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gcc "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    GCC_FOR_TARGET='$()'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
+echo "configure:5797: checking where to find the target gcj" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gcc "*) ;;
+    *) ok=no ;;
+  esac
+  case ,${enable_languages}, in
+    *,java,*) ;;
+    *) ok=no ;;
+  esac
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    GCJ_FOR_TARGET='$(GCJ)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
+echo "configure:5825: checking where to find the target gfortran" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" gcc "*) ;;
+    *) ok=no ;;
+  esac
+  case ,${enable_languages}, in
+    *,fortran,*) ;;
+    *) ok=no ;;
+  esac
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    GFORTRAN_FOR_TARGET='$(GFORTRAN)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
+echo "configure:5853: checking where to find the target ld" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" ld "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/ld/ld-new'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    LD_FOR_TARGET='$(LD)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
+echo "configure:5878: checking where to find the target lipo" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  if test "x$target" = "x$host"; then
+    # We can use an host tool
+    LIPO_FOR_TARGET='$(LIPO)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
+echo "configure:5893: checking where to find the target nm" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/nm-new'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    NM_FOR_TARGET='$(NM)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
+echo "configure:5918: checking where to find the target objdump" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    OBJDUMP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objdump'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    OBJDUMP_FOR_TARGET='$(OBJDUMP)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
+echo "configure:5943: checking where to find the target ranlib" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    RANLIB_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ranlib'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    RANLIB_FOR_TARGET='$(RANLIB)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
+echo "configure:5968: checking where to find the target strip" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    STRIP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/strip'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    STRIP_FOR_TARGET='$(STRIP)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
+fi
+echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
+echo "configure:5993: checking where to find the target windres" >&5
+if test "x${build}" != "x${host}" ; then
+  # Canadian cross, just use what we found
+  echo "$ac_t""pre-installed" 1>&6
+else
+  ok=yes
+  case " ${configdirs} " in
+    *" binutils "*) ;;
+    *) ok=no ;;
+  esac
+  
+  if test $ok = yes; then
+    # An in-tree tool is available and we can use it
+    WINDRES_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/windres'
+    echo "$ac_t""just compiled" 1>&6
+  elif test "x$target" = "x$host"; then
+    # We can use an host tool
+    WINDRES_FOR_TARGET='$(WINDRES)'
+    echo "$ac_t""host tool" 1>&6
+  else
+    # We need a cross tool
+    echo "$ac_t""pre-installed" 1>&6
+  fi
 fi
 
 
 
+
 # Certain tools may need extra flags.
 AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
 RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
 
+# When building target libraries, except in a Canadian cross, we use
+# the same toolchain as the compiler we just built.
+COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)'
+COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)'
+COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)'
+if test $host = $build; then
+  case " $configdirs " in
+    *" gcc "*)
+      COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as'
+      COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld'
+      COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'${extra_nmflags_for_target}
+      ;;
+  esac
+fi
+
+
+
+
+
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:5306: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:6046: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -5345,42 +6085,6 @@ case $build in
 esac
 
 
-# It makes debugging easier if we create as symlinks the stage directories
-# gcc for stageN-gcc and stagePREV-gcc for stage(N-1).  In case this is not
-# possible, however, we can resort to mv.
-echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6
-echo "configure:5353: checking if symbolic links between directories work" >&5
-if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "${LN_S}" = "ln -s" \
-   && mkdir confdir.s1 \
-   && ln -s confdir.s1 confdir.s2 \
-   && echo timestamp1 > confdir.s1/conftest.1 \
-   && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
-   && echo timestamp2 > confdir.s2/conftest.2 \
-   && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
-   && rm -f confdir.s2; then
-  gcc_cv_prog_ln_s_dir=yes
-else
-  gcc_cv_prog_ln_s_dir=no
-fi
-rm -rf confdir.s1 confdir.s2
-fi
-
-echo "$ac_t""$gcc_cv_prog_ln_s_dir" 1>&6
-
-case ${gcc_cv_prog_ln_s_dir} in
-  yes)
-    CREATE_LINK_TO_DIR='ln -s $$1 $$2'
-    UNDO_LINK_TO_DIR='rm -f $$1' ;;
-  *)
-    CREATE_LINK_TO_DIR='mv $$1 $$2'
-    UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
-esac
-
-
-
 # Enable -Werror in bootstrap stage2 and later.
 # Change the default to "no" on release branches.
 # Check whether --enable-werror or --disable-werror was given.
@@ -5463,15 +6167,34 @@ trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 # Transform confdefs.h into DEFS.
 # Protect against shell expansion while executing Makefile rules.
 # Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	(][^ 	(]*([^)]*)\)[ 	]*\(.*\),-D\1=\2,g
+t quote
+s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	][^ 	]*\)[ 	]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ 	`~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output.  A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
 
 
 # Without the "./", some shells look in PATH for config.status.
@@ -5573,14 +6296,6 @@ s%@gmplibs@%$gmplibs%g
 s%@gmpinc@%$gmpinc%g
 s%@stage1_languages@%$stage1_languages%g
 s%@SYSROOT_CFLAGS_FOR_TARGET@%$SYSROOT_CFLAGS_FOR_TARGET%g
-s%@CONFIGURED_BISON@%$CONFIGURED_BISON%g
-s%@CONFIGURED_YACC@%$CONFIGURED_YACC%g
-s%@CONFIGURED_M4@%$CONFIGURED_M4%g
-s%@CONFIGURED_FLEX@%$CONFIGURED_FLEX%g
-s%@CONFIGURED_LEX@%$CONFIGURED_LEX%g
-s%@CONFIGURED_MAKEINFO@%$CONFIGURED_MAKEINFO%g
-s%@bootstrap_lean@%$bootstrap_lean%g
-s%@default_target@%$default_target%g
 /@serialization_dependencies@/r $serialization_dependencies
 s%@serialization_dependencies@%%g
 /@host_makefile_frag@/r $host_makefile_frag
@@ -5596,7 +6311,9 @@ s%@BUILD_PREFIX@%$BUILD_PREFIX%g
 s%@BUILD_PREFIX_1@%$BUILD_PREFIX_1%g
 s%@tooldir@%$tooldir%g
 s%@build_tooldir@%$build_tooldir%g
+s%@CONFIGURE_GDB_TK@%$CONFIGURE_GDB_TK%g
 s%@GDB_TK@%$GDB_TK%g
+s%@INSTALL_GDB_TK@%$INSTALL_GDB_TK%g
 s%@build_configargs@%$build_configargs%g
 s%@build_configdirs@%$build_configdirs%g
 s%@host_configargs@%$host_configargs%g
@@ -5605,12 +6322,22 @@ s%@target_configargs@%$target_configargs%g
 s%@target_configdirs@%$target_configdirs%g
 s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
 s%@config_shell@%$config_shell%g
+s%@YACC@%$YACC%g
+s%@BISON@%$BISON%g
+s%@M4@%$M4%g
+s%@LEX@%$LEX%g
+s%@FLEX@%$FLEX%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@EXPECT@%$EXPECT%g
+s%@RUNTEST@%$RUNTEST%g
 s%@AR@%$AR%g
 s%@AS@%$AS%g
 s%@DLLTOOL@%$DLLTOOL%g
 s%@LD@%$LD%g
+s%@LIPO@%$LIPO%g
 s%@NM@%$NM%g
 s%@RANLIB@%$RANLIB%g
+s%@STRIP@%$STRIP%g
 s%@WINDRES@%$WINDRES%g
 s%@OBJCOPY@%$OBJCOPY%g
 s%@OBJDUMP@%$OBJDUMP%g
@@ -5627,31 +6354,19 @@ s%@GFORTRAN_FOR_TARGET@%$GFORTRAN_FOR_TARGET%g
 s%@LD_FOR_TARGET@%$LD_FOR_TARGET%g
 s%@LIPO_FOR_TARGET@%$LIPO_FOR_TARGET%g
 s%@NM_FOR_TARGET@%$NM_FOR_TARGET%g
+s%@OBJDUMP_FOR_TARGET@%$OBJDUMP_FOR_TARGET%g
 s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g
 s%@STRIP_FOR_TARGET@%$STRIP_FOR_TARGET%g
 s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g
-s%@CONFIGURED_AR_FOR_TARGET@%$CONFIGURED_AR_FOR_TARGET%g
-s%@CONFIGURED_AS_FOR_TARGET@%$CONFIGURED_AS_FOR_TARGET%g
-s%@CONFIGURED_CC_FOR_TARGET@%$CONFIGURED_CC_FOR_TARGET%g
-s%@CONFIGURED_CXX_FOR_TARGET@%$CONFIGURED_CXX_FOR_TARGET%g
-s%@CONFIGURED_DLLTOOL_FOR_TARGET@%$CONFIGURED_DLLTOOL_FOR_TARGET%g
-s%@CONFIGURED_GCC_FOR_TARGET@%$CONFIGURED_GCC_FOR_TARGET%g
-s%@CONFIGURED_GCJ_FOR_TARGET@%$CONFIGURED_GCJ_FOR_TARGET%g
-s%@CONFIGURED_GFORTRAN_FOR_TARGET@%$CONFIGURED_GFORTRAN_FOR_TARGET%g
-s%@CONFIGURED_LD_FOR_TARGET@%$CONFIGURED_LD_FOR_TARGET%g
-s%@CONFIGURED_LIPO_FOR_TARGET@%$CONFIGURED_LIPO_FOR_TARGET%g
-s%@CONFIGURED_NM_FOR_TARGET@%$CONFIGURED_NM_FOR_TARGET%g
-s%@CONFIGURED_RANLIB_FOR_TARGET@%$CONFIGURED_RANLIB_FOR_TARGET%g
-s%@CONFIGURED_STRIP_FOR_TARGET@%$CONFIGURED_STRIP_FOR_TARGET%g
-s%@CONFIGURED_WINDRES_FOR_TARGET@%$CONFIGURED_WINDRES_FOR_TARGET%g
 s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g
 s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g
+s%@COMPILER_AS_FOR_TARGET@%$COMPILER_AS_FOR_TARGET%g
+s%@COMPILER_LD_FOR_TARGET@%$COMPILER_LD_FOR_TARGET%g
+s%@COMPILER_NM_FOR_TARGET@%$COMPILER_NM_FOR_TARGET%g
 s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
 s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
 s%@MAINT@%$MAINT%g
 s%@stage1_cflags@%$stage1_cflags%g
-s%@CREATE_LINK_TO_DIR@%$CREATE_LINK_TO_DIR%g
-s%@UNDO_LINK_TO_DIR@%$UNDO_LINK_TO_DIR%g
 s%@stage2_werror_flag@%$stage2_werror_flag%g
 
 CEOF