// Locale support -*- C++ -*-
-// Copyright (C) 1997-2000 Free Software Foundation, Inc.
+// Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+// Free Software Foundation, Inc.
//
// This file is part of the GNU ISO C++ Library. This library is free
// software; you can redistribute it and/or modify it under the
// ISO C++ 14882: 22.1 Locales
//
-// Warning: this file is not meant for user inclusion. Use <locale>.
+/** @file locale_facets.h
+ * This is an internal header file, included by other library headers.
+ * You should not attempt to use it directly.
+ */
-#ifndef _CPP_BITS_LOCFACETS_H
-#define _CPP_BITS_LOCFACETS_H 1
+#ifndef _LOCALE_FACETS_H
+#define _LOCALE_FACETS_H 1
-#include <bits/std_ctime.h> // For struct tm
-#include <typeinfo> // For bad_cast, which shouldn't be here.
-#include <bits/std_ios.h> // For ios_base
-#ifdef _GLIBCPP_USE_WCHAR_T
-# include <bits/std_cwctype.h> // For wctype_t
-#endif
+#pragma GCC system_header
+
+#include <ctime> // For struct tm
+#include <cwctype> // For wctype_t
+#include <iosfwd>
+#include <bits/ios_base.h> // For ios_base, ios_base::iostate
+#include <streambuf>
namespace std
{
- // XXX This function is to be specialized for the "required" facets to
- // be constructed lazily. The specializations must be declared after
- // the definitions of the facets themselves; but they shouldn't be
- // inline. Corresponding new's in locale::classic() should then be
- // eliminated. Note that ctype<> should not get this treatment;
- // see the use_facet<> specializations below.
- //
- struct _Bad_use_facet : public bad_cast
- {
- _Bad_use_facet() throw() {}
+ // NB: Don't instantiate required wchar_t facets if no wchar_t support.
+#ifdef _GLIBCXX_USE_WCHAR_T
+# define _GLIBCXX_NUM_FACETS 28
+#else
+# define _GLIBCXX_NUM_FACETS 14
+#endif
- _Bad_use_facet(_Bad_use_facet const& __b) throw()
- : bad_cast(__b) { }
+ // Convert string to numeric value of type _Tv and store results.
+ // NB: This is specialized for all required types, there is no
+ // generic definition.
+ template<typename _Tv>
+ void
+ __convert_to_v(const char* __in, _Tv& __out, ios_base::iostate& __err,
+ const __c_locale& __cloc);
- _Bad_use_facet&
- operator=(_Bad_use_facet const& __b) throw()
- {
- static_cast<bad_cast*>(this)->operator=(__b);
- return *this;
- }
+ // Explicit specializations for required types.
+ template<>
+ void
+ __convert_to_v(const char*, float&, ios_base::iostate&,
+ const __c_locale&);
- virtual char const*
- what() const throw();
+ template<>
+ void
+ __convert_to_v(const char*, double&, ios_base::iostate&,
+ const __c_locale&);
- virtual
- ~_Bad_use_facet() throw();
- };
+ template<>
+ void
+ __convert_to_v(const char*, long double&, ios_base::iostate&,
+ const __c_locale&);
- template<typename _Facet>
- const _Facet&
- _Use_facet_failure_handler(const locale&)
- { throw _Bad_use_facet(); }
+ // NB: __pad is a struct, rather than a function, so it can be
+ // partially-specialized.
+ template<typename _CharT, typename _Traits>
+ struct __pad
+ {
+ static void
+ _S_pad(ios_base& __io, _CharT __fill, _CharT* __news,
+ const _CharT* __olds, const streamsize __newlen,
+ const streamsize __oldlen, const bool __num);
+ };
+
+ // Used by both numeric and monetary facets.
+ // Inserts "group separator" characters into an array of characters.
+ // It's recursive, one iteration per group. It moves the characters
+ // in the buffer this way: "xxxx12345" -> "12,345xxx". Call this
+ // only with __glen != 0.
+ template<typename _CharT>
+ _CharT*
+ __add_grouping(_CharT* __s, _CharT __sep,
+ const char* __gbeg, size_t __gsize,
+ const _CharT* __first, const _CharT* __last);
+
+ // This template permits specializing facet output code for
+ // ostreambuf_iterator. For ostreambuf_iterator, sputn is
+ // significantly more efficient than incrementing iterators.
+ template<typename _CharT>
+ inline
+ ostreambuf_iterator<_CharT>
+ __write(ostreambuf_iterator<_CharT> __s, const _CharT* __ws, int __len)
+ {
+ __s._M_put(__ws, __len);
+ return __s;
+ }
+
+ // This is the unspecialized form of the template.
+ template<typename _CharT, typename _OutIter>
+ inline
+ _OutIter
+ __write(_OutIter __s, const _CharT* __ws, int __len)
+ {
+ for (int __j = 0; __j < __len; __j++, ++__s)
+ *__s = __ws[__j];
+ return __s;
+ }
- // 22.2.1 The ctype category
- // Include host-specific ctype enums for ctype_base.
- #include <bits/ctype_base.h>
// 22.2.1.1 Template class ctype
- // __ctype_abstract_base is the common base for ctype<_CharT>.
+ // Include host and configuration specific ctype enums for ctype_base.
+ #include <bits/ctype_base.h>
+
+ // Common base for ctype<_CharT>.
+ /**
+ * @brief Common base for ctype facet
+ *
+ * This template class provides implementations of the public functions
+ * that forward to the protected virtual functions.
+ *
+ * This template also provides abtract stubs for the protected virtual
+ * functions.
+ */
template<typename _CharT>
class __ctype_abstract_base : public locale::facet, public ctype_base
{
public:
// Types:
+ /// Typedef for the template parameter
typedef _CharT char_type;
- bool
+ /**
+ * @brief Test char_type classification.
+ *
+ * This function finds a mask M for @a c and compares it to mask @a m.
+ * It does so by returning the value of ctype<char_type>::do_is().
+ *
+ * @param c The char_type to compare the mask of.
+ * @param m The mask to compare against.
+ * @return (M & m) != 0.
+ */
+ bool
is(mask __m, char_type __c) const
{ return this->do_is(__m, __c); }
+ /**
+ * @brief Return a mask array.
+ *
+ * This function finds the mask for each char_type in the range [lo,hi)
+ * and successively writes it to vec. vec must have as many elements
+ * as the char array. It does so by returning the value of
+ * ctype<char_type>::do_is().
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @param vec Pointer to an array of mask storage.
+ * @return @a hi.
+ */
const char_type*
- is(const char_type *__lo, const char_type *__hi, mask *__vec) const
+ is(const char_type *__lo, const char_type *__hi, mask *__vec) const
{ return this->do_is(__lo, __hi, __vec); }
+ /**
+ * @brief Find char_type matching a mask
+ *
+ * This function searches for and returns the first char_type c in
+ * [lo,hi) for which is(m,c) is true. It does so by returning
+ * ctype<char_type>::do_scan_is().
+ *
+ * @param m The mask to compare against.
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return Pointer to matching char_type if found, else @a hi.
+ */
const char_type*
scan_is(mask __m, const char_type* __lo, const char_type* __hi) const
{ return this->do_scan_is(__m, __lo, __hi); }
+ /**
+ * @brief Find char_type not matching a mask
+ *
+ * This function searches for and returns the first char_type c in
+ * [lo,hi) for which is(m,c) is false. It does so by returning
+ * ctype<char_type>::do_scan_not().
+ *
+ * @param m The mask to compare against.
+ * @param lo Pointer to first char in range.
+ * @param hi Pointer to end of range.
+ * @return Pointer to non-matching char if found, else @a hi.
+ */
const char_type*
scan_not(mask __m, const char_type* __lo, const char_type* __hi) const
{ return this->do_scan_not(__m, __lo, __hi); }
- char_type
+ /**
+ * @brief Convert to uppercase.
+ *
+ * This function converts the argument to uppercase if possible.
+ * If not possible (for example, '2'), returns the argument. It does
+ * so by returning ctype<char_type>::do_toupper().
+ *
+ * @param c The char_type to convert.
+ * @return The uppercase char_type if convertible, else @a c.
+ */
+ char_type
toupper(char_type __c) const
{ return this->do_toupper(__c); }
+ /**
+ * @brief Convert array to uppercase.
+ *
+ * This function converts each char_type in the range [lo,hi) to
+ * uppercase if possible. Other elements remain untouched. It does so
+ * by returning ctype<char_type>:: do_toupper(lo, hi).
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return @a hi.
+ */
const char_type*
- toupper(char_type *__low, const char_type* __high) const
- { return this->do_toupper(__low, __high); }
-
- char_type
+ toupper(char_type *__lo, const char_type* __hi) const
+ { return this->do_toupper(__lo, __hi); }
+
+ /**
+ * @brief Convert to lowercase.
+ *
+ * This function converts the argument to lowercase if possible. If
+ * not possible (for example, '2'), returns the argument. It does so
+ * by returning ctype<char_type>::do_tolower(c).
+ *
+ * @param c The char_type to convert.
+ * @return The lowercase char_type if convertible, else @a c.
+ */
+ char_type
tolower(char_type __c) const
{ return this->do_tolower(__c); }
+ /**
+ * @brief Convert array to lowercase.
+ *
+ * This function converts each char_type in the range [lo,hi) to
+ * lowercase if possible. Other elements remain untouched. It does so
+ * by returning ctype<char_type>:: do_tolower(lo, hi).
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return @a hi.
+ */
const char_type*
- tolower(char_type* __low, const char_type* __high) const
- { return this->do_tolower(__low, __high); }
-
- char_type
+ tolower(char_type* __lo, const char_type* __hi) const
+ { return this->do_tolower(__lo, __hi); }
+
+ /**
+ * @brief Widen char to char_type
+ *
+ * This function converts the char argument to char_type using the
+ * simplest reasonable transformation. It does so by returning
+ * ctype<char_type>::do_widen(c).
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param c The char to convert.
+ * @return The converted char_type.
+ */
+ char_type
widen(char __c) const
{ return this->do_widen(__c); }
+ /**
+ * @brief Widen array to char_type
+ *
+ * This function converts each char in the input to char_type using the
+ * simplest reasonable transformation. It does so by returning
+ * ctype<char_type>::do_widen(c).
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @param to Pointer to the destination array.
+ * @return @a hi.
+ */
const char*
- widen(const char* __low, const char* __high, char_type* __to) const
- { return this->do_widen(__low, __high, __to); }
-
- char
+ widen(const char* __lo, const char* __hi, char_type* __to) const
+ { return this->do_widen(__lo, __hi, __to); }
+
+ /**
+ * @brief Narrow char_type to char
+ *
+ * This function converts the char_type to char using the simplest
+ * reasonable transformation. If the conversion fails, dfault is
+ * returned instead. It does so by returning
+ * ctype<char_type>::do_narrow(c).
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param c The char_type to convert.
+ * @param dfault Char to return if conversion fails.
+ * @return The converted char.
+ */
+ char
narrow(char_type __c, char __dfault) const
{ return this->do_narrow(__c, __dfault); }
+ /**
+ * @brief Narrow array to char array
+ *
+ * This function converts each char_type in the input to char using the
+ * simplest reasonable transformation and writes the results to the
+ * destination array. For any char_type in the input that cannot be
+ * converted, @a dfault is used instead. It does so by returning
+ * ctype<char_type>::do_narrow(lo, hi, dfault, to).
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @param dfault Char to use if conversion fails.
+ * @param to Pointer to the destination array.
+ * @return @a hi.
+ */
const char_type*
- narrow(const char_type* __low, const char_type* __high,
+ narrow(const char_type* __lo, const char_type* __hi,
char __dfault, char *__to) const
- { return this->do_narrow(__low, __high, __dfault, __to); }
+ { return this->do_narrow(__lo, __hi, __dfault, __to); }
protected:
- explicit
- __ctype_abstract_base(size_t __refs = 0): locale::facet(__refs) { }
+ explicit
+ __ctype_abstract_base(size_t __refs = 0): facet(__refs) { }
- virtual
+ virtual
~__ctype_abstract_base() { }
-
- virtual bool
+
+ /**
+ * @brief Test char_type classification.
+ *
+ * This function finds a mask M for @a c and compares it to mask @a m.
+ *
+ * do_is() is a hook for a derived facet to change the behavior of
+ * classifying. do_is() must always return the same result for the
+ * same input.
+ *
+ * @param c The char_type to find the mask of.
+ * @param m The mask to compare against.
+ * @return (M & m) != 0.
+ */
+ virtual bool
do_is(mask __m, char_type __c) const = 0;
+ /**
+ * @brief Return a mask array.
+ *
+ * This function finds the mask for each char_type in the range [lo,hi)
+ * and successively writes it to vec. vec must have as many elements
+ * as the input.
+ *
+ * do_is() is a hook for a derived facet to change the behavior of
+ * classifying. do_is() must always return the same result for the
+ * same input.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @param vec Pointer to an array of mask storage.
+ * @return @a hi.
+ */
virtual const char_type*
- do_is(const char_type* __lo, const char_type* __hi,
+ do_is(const char_type* __lo, const char_type* __hi,
mask* __vec) const = 0;
+ /**
+ * @brief Find char_type matching mask
+ *
+ * This function searches for and returns the first char_type c in
+ * [lo,hi) for which is(m,c) is true.
+ *
+ * do_scan_is() is a hook for a derived facet to change the behavior of
+ * match searching. do_is() must always return the same result for the
+ * same input.
+ *
+ * @param m The mask to compare against.
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return Pointer to a matching char_type if found, else @a hi.
+ */
virtual const char_type*
- do_scan_is(mask __m, const char_type* __lo,
+ do_scan_is(mask __m, const char_type* __lo,
const char_type* __hi) const = 0;
+ /**
+ * @brief Find char_type not matching mask
+ *
+ * This function searches for and returns a pointer to the first
+ * char_type c of [lo,hi) for which is(m,c) is false.
+ *
+ * do_scan_is() is a hook for a derived facet to change the behavior of
+ * match searching. do_is() must always return the same result for the
+ * same input.
+ *
+ * @param m The mask to compare against.
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return Pointer to a non-matching char_type if found, else @a hi.
+ */
virtual const char_type*
- do_scan_not(mask __m, const char_type* __lo,
+ do_scan_not(mask __m, const char_type* __lo,
const char_type* __hi) const = 0;
- virtual char_type
+ /**
+ * @brief Convert to uppercase.
+ *
+ * This virtual function converts the char_type argument to uppercase
+ * if possible. If not possible (for example, '2'), returns the
+ * argument.
+ *
+ * do_toupper() is a hook for a derived facet to change the behavior of
+ * uppercasing. do_toupper() must always return the same result for
+ * the same input.
+ *
+ * @param c The char_type to convert.
+ * @return The uppercase char_type if convertible, else @a c.
+ */
+ virtual char_type
do_toupper(char_type) const = 0;
+ /**
+ * @brief Convert array to uppercase.
+ *
+ * This virtual function converts each char_type in the range [lo,hi)
+ * to uppercase if possible. Other elements remain untouched.
+ *
+ * do_toupper() is a hook for a derived facet to change the behavior of
+ * uppercasing. do_toupper() must always return the same result for
+ * the same input.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return @a hi.
+ */
virtual const char_type*
- do_toupper(char_type* __low, const char_type* __high) const = 0;
-
- virtual char_type
+ do_toupper(char_type* __lo, const char_type* __hi) const = 0;
+
+ /**
+ * @brief Convert to lowercase.
+ *
+ * This virtual function converts the argument to lowercase if
+ * possible. If not possible (for example, '2'), returns the argument.
+ *
+ * do_tolower() is a hook for a derived facet to change the behavior of
+ * lowercasing. do_tolower() must always return the same result for
+ * the same input.
+ *
+ * @param c The char_type to convert.
+ * @return The lowercase char_type if convertible, else @a c.
+ */
+ virtual char_type
do_tolower(char_type) const = 0;
+ /**
+ * @brief Convert array to lowercase.
+ *
+ * This virtual function converts each char_type in the range [lo,hi)
+ * to lowercase if possible. Other elements remain untouched.
+ *
+ * do_tolower() is a hook for a derived facet to change the behavior of
+ * lowercasing. do_tolower() must always return the same result for
+ * the same input.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return @a hi.
+ */
virtual const char_type*
- do_tolower(char_type* __low, const char_type* __high) const = 0;
-
- virtual char_type
+ do_tolower(char_type* __lo, const char_type* __hi) const = 0;
+
+ /**
+ * @brief Widen char
+ *
+ * This virtual function converts the char to char_type using the
+ * simplest reasonable transformation.
+ *
+ * do_widen() is a hook for a derived facet to change the behavior of
+ * widening. do_widen() must always return the same result for the
+ * same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param c The char to convert.
+ * @return The converted char_type
+ */
+ virtual char_type
do_widen(char) const = 0;
+ /**
+ * @brief Widen char array
+ *
+ * This function converts each char in the input to char_type using the
+ * simplest reasonable transformation.
+ *
+ * do_widen() is a hook for a derived facet to change the behavior of
+ * widening. do_widen() must always return the same result for the
+ * same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param lo Pointer to start range.
+ * @param hi Pointer to end of range.
+ * @param to Pointer to the destination array.
+ * @return @a hi.
+ */
virtual const char*
- do_widen(const char* __low, const char* __high,
+ do_widen(const char* __lo, const char* __hi,
char_type* __dest) const = 0;
- virtual char
+ /**
+ * @brief Narrow char_type to char
+ *
+ * This virtual function converts the argument to char using the
+ * simplest reasonable transformation. If the conversion fails, dfault
+ * is returned instead.
+ *
+ * do_narrow() is a hook for a derived facet to change the behavior of
+ * narrowing. do_narrow() must always return the same result for the
+ * same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param c The char_type to convert.
+ * @param dfault Char to return if conversion fails.
+ * @return The converted char.
+ */
+ virtual char
do_narrow(char_type, char __dfault) const = 0;
+ /**
+ * @brief Narrow char_type array to char
+ *
+ * This virtual function converts each char_type in the range [lo,hi) to
+ * char using the simplest reasonable transformation and writes the
+ * results to the destination array. For any element in the input that
+ * cannot be converted, @a dfault is used instead.
+ *
+ * do_narrow() is a hook for a derived facet to change the behavior of
+ * narrowing. do_narrow() must always return the same result for the
+ * same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @param dfault Char to use if conversion fails.
+ * @param to Pointer to the destination array.
+ * @return @a hi.
+ */
virtual const char_type*
- do_narrow(const char_type* __low, const char_type* __high,
- char __dfault, char* __dest) const = 0;
+ do_narrow(const char_type* __lo, const char_type* __hi,
+ char __dfault, char* __dest) const = 0;
};
// NB: Generic, mostly useless implementation.
+ /**
+ * @brief Template ctype facet
+ *
+ * This template class defines classification and conversion functions for
+ * character sets. It wraps <cctype> functionality. Ctype gets used by
+ * streams for many I/O operations.
+ *
+ * This template provides the protected virtual functions the developer
+ * will have to replace in a derived class or specialization to make a
+ * working facet. The public functions that access them are defined in
+ * __ctype_abstract_base, to allow for implementation flexibility. See
+ * ctype<wchar_t> for an example. The functions are documented in
+ * __ctype_abstract_base.
+ *
+ * Note: implementations are provided for all the protected virtual
+ * functions, but will likely not be useful.
+ */
template<typename _CharT>
class ctype : public __ctype_abstract_base<_CharT>
{
public:
// Types:
- typedef _CharT char_type;
- typedef typename ctype::mask mask;
+ typedef _CharT char_type;
+ typedef typename __ctype_abstract_base<_CharT>::mask mask;
- explicit
- ctype(size_t __refs = 0) : __ctype_abstract_base<_CharT>(__refs) { }
+ /// The facet id for ctype<char_type>
+ static locale::id id;
- static locale::id id;
+ explicit
+ ctype(size_t __refs = 0) : __ctype_abstract_base<_CharT>(__refs) { }
protected:
- virtual
- ~ctype() { }
+ virtual
+ ~ctype();
+
+ virtual bool
+ do_is(mask __m, char_type __c) const;
+
+ virtual const char_type*
+ do_is(const char_type* __lo, const char_type* __hi, mask* __vec) const;
+
+ virtual const char_type*
+ do_scan_is(mask __m, const char_type* __lo, const char_type* __hi) const;
+
+ virtual const char_type*
+ do_scan_not(mask __m, const char_type* __lo,
+ const char_type* __hi) const;
+
+ virtual char_type
+ do_toupper(char_type __c) const;
+
+ virtual const char_type*
+ do_toupper(char_type* __lo, const char_type* __hi) const;
+
+ virtual char_type
+ do_tolower(char_type __c) const;
+
+ virtual const char_type*
+ do_tolower(char_type* __lo, const char_type* __hi) const;
+
+ virtual char_type
+ do_widen(char __c) const;
+
+ virtual const char*
+ do_widen(const char* __lo, const char* __hi, char_type* __dest) const;
+
+ virtual char
+ do_narrow(char_type, char __dfault) const;
+
+ virtual const char_type*
+ do_narrow(const char_type* __lo, const char_type* __hi,
+ char __dfault, char* __dest) const;
};
- // 22.2.1.3 ctype specializations
+ template<typename _CharT>
+ locale::id ctype<_CharT>::id;
+
+ // 22.2.1.3 ctype<char> specialization.
+ /**
+ * @brief The ctype<char> specialization.
+ *
+ * This class defines classification and conversion functions for
+ * the char type. It gets used by char streams for many I/O
+ * operations. The char specialization provides a number of
+ * optimizations as well.
+ */
template<>
- class ctype<char> : public __ctype_abstract_base<char>
+ class ctype<char> : public locale::facet, public ctype_base
{
public:
// Types:
- typedef char char_type;
- typedef ctype::mask mask;
+ /// Typedef for the template parameter char.
+ typedef char char_type;
- private:
+ protected:
// Data Members:
- bool _M_del;
- __to_type const& _M_toupper;
- __to_type const& _M_tolower;
- const mask* const& _M_ctable;
- const mask* _M_table;
-
+ __c_locale _M_c_locale_ctype;
+ bool _M_del;
+ __to_type _M_toupper;
+ __to_type _M_tolower;
+ const mask* _M_table;
+ mutable char _M_widen_ok;
+ mutable char _M_widen[1 + static_cast<unsigned char>(-1)];
+ mutable char _M_narrow[1 + static_cast<unsigned char>(-1)];
+ mutable char _M_narrow_ok; // 0 uninitialized, 1 init,
+ // 2 non-consecutive
+
public:
+ /// The facet id for ctype<char>
static locale::id id;
+ /// The size of the mask table. It is SCHAR_MAX + 1.
static const size_t table_size = 1 + static_cast<unsigned char>(-1);
- explicit
+ /**
+ * @brief Constructor performs initialization.
+ *
+ * This is the constructor provided by the standard.
+ *
+ * @param table If non-zero, table is used as the per-char mask.
+ * Else classic_table() is used.
+ * @param del If true, passes ownership of table to this facet.
+ * @param refs Passed to the base facet class.
+ */
+ explicit
ctype(const mask* __table = 0, bool __del = false, size_t __refs = 0);
- inline bool
- is(mask __m, char __c) const throw();
-
+ /**
+ * @brief Constructor performs static initialization.
+ *
+ * This constructor is used to construct the initial C locale facet.
+ *
+ * @param cloc Handle to C locale data.
+ * @param table If non-zero, table is used as the per-char mask.
+ * @param del If true, passes ownership of table to this facet.
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ ctype(__c_locale __cloc, const mask* __table = 0, bool __del = false,
+ size_t __refs = 0);
+
+ /**
+ * @brief Test char classification.
+ *
+ * This function compares the mask table[c] to @a m.
+ *
+ * @param c The char to compare the mask of.
+ * @param m The mask to compare against.
+ * @return True if m & table[c] is true, false otherwise.
+ */
+ inline bool
+ is(mask __m, char __c) const;
+
+ /**
+ * @brief Return a mask array.
+ *
+ * This function finds the mask for each char in the range [lo, hi) and
+ * successively writes it to vec. vec must have as many elements as
+ * the char array.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @param vec Pointer to an array of mask storage.
+ * @return @a hi.
+ */
inline const char*
- is(const char* __low, const char* __high, mask* __vec) const throw();
-
+ is(const char* __lo, const char* __hi, mask* __vec) const;
+
+ /**
+ * @brief Find char matching a mask
+ *
+ * This function searches for and returns the first char in [lo,hi) for
+ * which is(m,char) is true.
+ *
+ * @param m The mask to compare against.
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return Pointer to a matching char if found, else @a hi.
+ */
inline const char*
- scan_is(mask __m, const char* __low, const char* __high) const throw();
-
+ scan_is(mask __m, const char* __lo, const char* __hi) const;
+
+ /**
+ * @brief Find char not matching a mask
+ *
+ * This function searches for and returns a pointer to the first char
+ * in [lo,hi) for which is(m,char) is false.
+ *
+ * @param m The mask to compare against.
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return Pointer to a non-matching char if found, else @a hi.
+ */
inline const char*
- scan_not(mask __m, const char* __low, const char* __high) const throw();
-
- protected:
- virtual
- ~ctype();
+ scan_not(mask __m, const char* __lo, const char* __hi) const;
+
+ /**
+ * @brief Convert to uppercase.
+ *
+ * This function converts the char argument to uppercase if possible.
+ * If not possible (for example, '2'), returns the argument.
+ *
+ * toupper() acts as if it returns ctype<char>::do_toupper(c).
+ * do_toupper() must always return the same result for the same input.
+ *
+ * @param c The char to convert.
+ * @return The uppercase char if convertible, else @a c.
+ */
+ char_type
+ toupper(char_type __c) const
+ { return this->do_toupper(__c); }
- // XXX
- const mask*
- table() const throw()
- { return _M_table; }
+ /**
+ * @brief Convert array to uppercase.
+ *
+ * This function converts each char in the range [lo,hi) to uppercase
+ * if possible. Other chars remain untouched.
+ *
+ * toupper() acts as if it returns ctype<char>:: do_toupper(lo, hi).
+ * do_toupper() must always return the same result for the same input.
+ *
+ * @param lo Pointer to first char in range.
+ * @param hi Pointer to end of range.
+ * @return @a hi.
+ */
+ const char_type*
+ toupper(char_type *__lo, const char_type* __hi) const
+ { return this->do_toupper(__lo, __hi); }
+
+ /**
+ * @brief Convert to lowercase.
+ *
+ * This function converts the char argument to lowercase if possible.
+ * If not possible (for example, '2'), returns the argument.
+ *
+ * tolower() acts as if it returns ctype<char>::do_tolower(c).
+ * do_tolower() must always return the same result for the same input.
+ *
+ * @param c The char to convert.
+ * @return The lowercase char if convertible, else @a c.
+ */
+ char_type
+ tolower(char_type __c) const
+ { return this->do_tolower(__c); }
- // XXX
- const mask*
- classic_table() throw()
- { return _M_ctable; }
+ /**
+ * @brief Convert array to lowercase.
+ *
+ * This function converts each char in the range [lo,hi) to lowercase
+ * if possible. Other chars remain untouched.
+ *
+ * tolower() acts as if it returns ctype<char>:: do_tolower(lo, hi).
+ * do_tolower() must always return the same result for the same input.
+ *
+ * @param lo Pointer to first char in range.
+ * @param hi Pointer to end of range.
+ * @return @a hi.
+ */
+ const char_type*
+ tolower(char_type* __lo, const char_type* __hi) const
+ { return this->do_tolower(__lo, __hi); }
+
+ /**
+ * @brief Widen char
+ *
+ * This function converts the char to char_type using the simplest
+ * reasonable transformation. For an underived ctype<char> facet, the
+ * argument will be returned unchanged.
+ *
+ * This function works as if it returns ctype<char>::do_widen(c).
+ * do_widen() must always return the same result for the same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param c The char to convert.
+ * @return The converted character.
+ */
+ char_type
+ widen(char __c) const
+ {
+ if (_M_widen_ok) return _M_widen[static_cast<unsigned char>(__c)];
+ this->_M_widen_init();
+ return this->do_widen(__c);
+ }
- virtual bool
- do_is(mask __m, char_type __c) const;
+ /**
+ * @brief Widen char array
+ *
+ * This function converts each char in the input to char using the
+ * simplest reasonable transformation. For an underived ctype<char>
+ * facet, the argument will be copied unchanged.
+ *
+ * This function works as if it returns ctype<char>::do_widen(c).
+ * do_widen() must always return the same result for the same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param lo Pointer to first char in range.
+ * @param hi Pointer to end of range.
+ * @param to Pointer to the destination array.
+ * @return @a hi.
+ */
+ const char*
+ widen(const char* __lo, const char* __hi, char_type* __to) const
+ {
+ if (_M_widen_ok == 1)
+ {
+ memcpy(__to, __lo, __hi - __lo);
+ return __hi;
+ }
+ if (!_M_widen_ok) _M_widen_init();
+ return this->do_widen(__lo, __hi, __to);
+ }
- virtual const char_type*
- do_is(const char_type* __lo, const char_type* __hi,
- mask* __vec) const;
+ /**
+ * @brief Narrow char
+ *
+ * This function converts the char to char using the simplest
+ * reasonable transformation. If the conversion fails, dfault is
+ * returned instead. For an underived ctype<char> facet, @a c
+ * will be returned unchanged.
+ *
+ * This function works as if it returns ctype<char>::do_narrow(c).
+ * do_narrow() must always return the same result for the same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param c The char to convert.
+ * @param dfault Char to return if conversion fails.
+ * @return The converted character.
+ */
+ char
+ narrow(char_type __c, char __dfault) const
+ {
+ if (_M_narrow[static_cast<unsigned char>(__c)])
+ return _M_narrow[static_cast<unsigned char>(__c)];
+ const char __t = do_narrow(__c, __dfault);
+ if (__t != __dfault) _M_narrow[static_cast<unsigned char>(__c)] = __t;
+ return __t;
+ }
- virtual const char_type*
- do_scan_is(mask __m, const char_type* __lo,
- const char_type* __hi) const;
+ /**
+ * @brief Narrow char array
+ *
+ * This function converts each char in the input to char using the
+ * simplest reasonable transformation and writes the results to the
+ * destination array. For any char in the input that cannot be
+ * converted, @a dfault is used instead. For an underived ctype<char>
+ * facet, the argument will be copied unchanged.
+ *
+ * This function works as if it returns ctype<char>::do_narrow(lo, hi,
+ * dfault, to). do_narrow() must always return the same result for the
+ * same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @param dfault Char to use if conversion fails.
+ * @param to Pointer to the destination array.
+ * @return @a hi.
+ */
+ const char_type*
+ narrow(const char_type* __lo, const char_type* __hi,
+ char __dfault, char *__to) const
+ {
+ if (__builtin_expect(_M_narrow_ok == 1,true))
+ {
+ memcpy(__to, __lo, __hi - __lo);
+ return __hi;
+ }
+ if (!_M_narrow_ok)
+ _M_narrow_init();
+ return this->do_narrow(__lo, __hi, __dfault, __to);
+ }
- virtual const char_type*
- do_scan_not(mask __m, const char_type* __lo,
- const char_type* __hi) const;
+ protected:
+ /// Returns a pointer to the mask table provided to the constructor, or
+ /// the default from classic_table() if none was provided.
+ const mask*
+ table() const throw()
+ { return _M_table; }
+
+ /// Returns a pointer to the C locale mask table.
+ static const mask*
+ classic_table() throw();
+
+ /**
+ * @brief Destructor.
+ *
+ * This function deletes table() if @a del was true in the
+ * constructor.
+ */
+ virtual
+ ~ctype();
- virtual char_type
+ /**
+ * @brief Convert to uppercase.
+ *
+ * This virtual function converts the char argument to uppercase if
+ * possible. If not possible (for example, '2'), returns the argument.
+ *
+ * do_toupper() is a hook for a derived facet to change the behavior of
+ * uppercasing. do_toupper() must always return the same result for
+ * the same input.
+ *
+ * @param c The char to convert.
+ * @return The uppercase char if convertible, else @a c.
+ */
+ virtual char_type
do_toupper(char_type) const;
+ /**
+ * @brief Convert array to uppercase.
+ *
+ * This virtual function converts each char in the range [lo,hi) to
+ * uppercase if possible. Other chars remain untouched.
+ *
+ * do_toupper() is a hook for a derived facet to change the behavior of
+ * uppercasing. do_toupper() must always return the same result for
+ * the same input.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return @a hi.
+ */
virtual const char_type*
- do_toupper(char_type* __low, const char_type* __high) const;
-
- virtual char_type
+ do_toupper(char_type* __lo, const char_type* __hi) const;
+
+ /**
+ * @brief Convert to lowercase.
+ *
+ * This virtual function converts the char argument to lowercase if
+ * possible. If not possible (for example, '2'), returns the argument.
+ *
+ * do_tolower() is a hook for a derived facet to change the behavior of
+ * lowercasing. do_tolower() must always return the same result for
+ * the same input.
+ *
+ * @param c The char to convert.
+ * @return The lowercase char if convertible, else @a c.
+ */
+ virtual char_type
do_tolower(char_type) const;
+ /**
+ * @brief Convert array to lowercase.
+ *
+ * This virtual function converts each char in the range [lo,hi) to
+ * lowercase if possible. Other chars remain untouched.
+ *
+ * do_tolower() is a hook for a derived facet to change the behavior of
+ * lowercasing. do_tolower() must always return the same result for
+ * the same input.
+ *
+ * @param lo Pointer to first char in range.
+ * @param hi Pointer to end of range.
+ * @return @a hi.
+ */
virtual const char_type*
- do_tolower(char_type* __low, const char_type* __high) const;
-
- virtual char_type
- do_widen(char) const;
-
+ do_tolower(char_type* __lo, const char_type* __hi) const;
+
+ /**
+ * @brief Widen char
+ *
+ * This virtual function converts the char to char using the simplest
+ * reasonable transformation. For an underived ctype<char> facet, the
+ * argument will be returned unchanged.
+ *
+ * do_widen() is a hook for a derived facet to change the behavior of
+ * widening. do_widen() must always return the same result for the
+ * same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param c The char to convert.
+ * @return The converted character.
+ */
+ virtual char_type
+ do_widen(char __c) const
+ { return __c; }
+
+ /**
+ * @brief Widen char array
+ *
+ * This function converts each char in the range [lo,hi) to char using
+ * the simplest reasonable transformation. For an underived
+ * ctype<char> facet, the argument will be copied unchanged.
+ *
+ * do_widen() is a hook for a derived facet to change the behavior of
+ * widening. do_widen() must always return the same result for the
+ * same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @param to Pointer to the destination array.
+ * @return @a hi.
+ */
virtual const char*
- do_widen(const char* __low, const char* __high,
- char_type* __dest) const;
-
- virtual char
- do_narrow(char_type, char __dfault) const;
+ do_widen(const char* __lo, const char* __hi, char_type* __dest) const
+ {
+ memcpy(__dest, __lo, __hi - __lo);
+ return __hi;
+ }
+ /**
+ * @brief Narrow char
+ *
+ * This virtual function converts the char to char using the simplest
+ * reasonable transformation. If the conversion fails, dfault is
+ * returned instead. For an underived ctype<char> facet, @a c will be
+ * returned unchanged.
+ *
+ * do_narrow() is a hook for a derived facet to change the behavior of
+ * narrowing. do_narrow() must always return the same result for the
+ * same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param c The char to convert.
+ * @param dfault Char to return if conversion fails.
+ * @return The converted char.
+ */
+ virtual char
+ do_narrow(char_type __c, char) const
+ { return __c; }
+
+ /**
+ * @brief Narrow char array to char array
+ *
+ * This virtual function converts each char in the range [lo,hi) to
+ * char using the simplest reasonable transformation and writes the
+ * results to the destination array. For any char in the input that
+ * cannot be converted, @a dfault is used instead. For an underived
+ * ctype<char> facet, the argument will be copied unchanged.
+ *
+ * do_narrow() is a hook for a derived facet to change the behavior of
+ * narrowing. do_narrow() must always return the same result for the
+ * same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @param dfault Char to use if conversion fails.
+ * @param to Pointer to the destination array.
+ * @return @a hi.
+ */
virtual const char_type*
- do_narrow(const char_type* __low, const char_type* __high,
- char __dfault, char* __dest) const;
+ do_narrow(const char_type* __lo, const char_type* __hi,
+ char, char* __dest) const
+ {
+ memcpy(__dest, __lo, __hi - __lo);
+ return __hi;
+ }
+
+ private:
+
+ void _M_widen_init() const
+ {
+ char __tmp[sizeof(_M_widen)];
+ for (size_t __i = 0; __i < sizeof(_M_widen); ++__i)
+ __tmp[__i] = __i;
+ do_widen(__tmp, __tmp + sizeof(__tmp), _M_widen);
+
+ _M_widen_ok = 1;
+ // Set _M_widen_ok to 2 if memcpy can't be used.
+ for (size_t __i = 0; __i < sizeof(_M_widen); ++__i)
+ if (__tmp[__i] != _M_widen[__i])
+ {
+ _M_widen_ok = 2;
+ break;
+ }
+ }
+
+ // Fill in the narrowing cache and flag whether all values are
+ // valid or not. _M_narrow_ok is set to 1 if the whole table is
+ // narrowed, 2 if only some values could be narrowed.
+ void _M_narrow_init() const
+ {
+ char __tmp[sizeof(_M_narrow)];
+ for (size_t __i = 0; __i < sizeof(_M_narrow); ++__i)
+ __tmp[__i] = __i;
+ do_narrow(__tmp, __tmp + sizeof(__tmp), 0, _M_narrow);
+
+ // Check if any default values were created. Do this by
+ // renarrowing with a different default value and comparing.
+ bool __consecutive = true;
+ for (size_t __i = 0; __i < sizeof(_M_narrow); ++__i)
+ if (!_M_narrow[__i])
+ {
+ char __c;
+ do_narrow(__tmp + __i, __tmp + __i + 1, 1, &__c);
+ if (__c == 1)
+ {
+ __consecutive = false;
+ break;
+ }
+ }
+ _M_narrow_ok = __consecutive ? 1 : 2;
+ }
};
-
+
template<>
const ctype<char>&
use_facet<ctype<char> >(const locale& __loc);
-#ifdef _GLIBCPP_USE_WCHAR_T
- // ctype<wchar_t> specialization
+#ifdef _GLIBCXX_USE_WCHAR_T
+ // 22.2.1.3 ctype<wchar_t> specialization
+ /**
+ * @brief The ctype<wchar_t> specialization.
+ *
+ * This class defines classification and conversion functions for the
+ * wchar_t type. It gets used by wchar_t streams for many I/O operations.
+ * The wchar_t specialization provides a number of optimizations as well.
+ *
+ * ctype<wchar_t> inherits its public methods from
+ * __ctype_abstract_base<wchar_t>.
+ */
template<>
class ctype<wchar_t> : public __ctype_abstract_base<wchar_t>
{
public:
// Types:
- typedef wchar_t char_type;
- typedef ctype::mask mask;
- typedef wctype_t __wmask_type;
+ /// Typedef for the template parameter wchar_t.
+ typedef wchar_t char_type;
+ typedef wctype_t __wmask_type;
- // Data Members:
- static locale::id id;
+ protected:
+ __c_locale _M_c_locale_ctype;
+
+ // Pre-computed narrowed and widened chars.
+ bool _M_narrow_ok;
+ char _M_narrow[128];
+ wint_t _M_widen[1 + static_cast<unsigned char>(-1)];
+
+ // Pre-computed elements for do_is.
+ mask _M_bit[16];
+ __wmask_type _M_wmask[16];
- explicit
+ public:
+ // Data Members:
+ /// The facet id for ctype<wchar_t>
+ static locale::id id;
+
+ /**
+ * @brief Constructor performs initialization.
+ *
+ * This is the constructor provided by the standard.
+ *
+ * @param refs Passed to the base facet class.
+ */
+ explicit
ctype(size_t __refs = 0);
+ /**
+ * @brief Constructor performs static initialization.
+ *
+ * This constructor is used to construct the initial C locale facet.
+ *
+ * @param cloc Handle to C locale data.
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ ctype(__c_locale __cloc, size_t __refs = 0);
+
protected:
__wmask_type
_M_convert_to_wmask(const mask __m) const;
- virtual
+ /// Destructor
+ virtual
~ctype();
- virtual bool
+ /**
+ * @brief Test wchar_t classification.
+ *
+ * This function finds a mask M for @a c and compares it to mask @a m.
+ *
+ * do_is() is a hook for a derived facet to change the behavior of
+ * classifying. do_is() must always return the same result for the
+ * same input.
+ *
+ * @param c The wchar_t to find the mask of.
+ * @param m The mask to compare against.
+ * @return (M & m) != 0.
+ */
+ virtual bool
do_is(mask __m, char_type __c) const;
+ /**
+ * @brief Return a mask array.
+ *
+ * This function finds the mask for each wchar_t in the range [lo,hi)
+ * and successively writes it to vec. vec must have as many elements
+ * as the input.
+ *
+ * do_is() is a hook for a derived facet to change the behavior of
+ * classifying. do_is() must always return the same result for the
+ * same input.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @param vec Pointer to an array of mask storage.
+ * @return @a hi.
+ */
virtual const char_type*
- do_is(const char_type* __lo, const char_type* __hi,
- mask* __vec) const;
-
+ do_is(const char_type* __lo, const char_type* __hi, mask* __vec) const;
+
+ /**
+ * @brief Find wchar_t matching mask
+ *
+ * This function searches for and returns the first wchar_t c in
+ * [lo,hi) for which is(m,c) is true.
+ *
+ * do_scan_is() is a hook for a derived facet to change the behavior of
+ * match searching. do_is() must always return the same result for the
+ * same input.
+ *
+ * @param m The mask to compare against.
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return Pointer to a matching wchar_t if found, else @a hi.
+ */
virtual const char_type*
- do_scan_is(mask __m, const char_type* __lo,
- const char_type* __hi) const;
-
+ do_scan_is(mask __m, const char_type* __lo, const char_type* __hi) const;
+
+ /**
+ * @brief Find wchar_t not matching mask
+ *
+ * This function searches for and returns a pointer to the first
+ * wchar_t c of [lo,hi) for which is(m,c) is false.
+ *
+ * do_scan_is() is a hook for a derived facet to change the behavior of
+ * match searching. do_is() must always return the same result for the
+ * same input.
+ *
+ * @param m The mask to compare against.
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return Pointer to a non-matching wchar_t if found, else @a hi.
+ */
virtual const char_type*
- do_scan_not(mask __m, const char_type* __lo,
+ do_scan_not(mask __m, const char_type* __lo,
const char_type* __hi) const;
- virtual char_type
+ /**
+ * @brief Convert to uppercase.
+ *
+ * This virtual function converts the wchar_t argument to uppercase if
+ * possible. If not possible (for example, '2'), returns the argument.
+ *
+ * do_toupper() is a hook for a derived facet to change the behavior of
+ * uppercasing. do_toupper() must always return the same result for
+ * the same input.
+ *
+ * @param c The wchar_t to convert.
+ * @return The uppercase wchar_t if convertible, else @a c.
+ */
+ virtual char_type
do_toupper(char_type) const;
+ /**
+ * @brief Convert array to uppercase.
+ *
+ * This virtual function converts each wchar_t in the range [lo,hi) to
+ * uppercase if possible. Other elements remain untouched.
+ *
+ * do_toupper() is a hook for a derived facet to change the behavior of
+ * uppercasing. do_toupper() must always return the same result for
+ * the same input.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return @a hi.
+ */
virtual const char_type*
- do_toupper(char_type* __low, const char_type* __high) const;
-
- virtual char_type
+ do_toupper(char_type* __lo, const char_type* __hi) const;
+
+ /**
+ * @brief Convert to lowercase.
+ *
+ * This virtual function converts the argument to lowercase if
+ * possible. If not possible (for example, '2'), returns the argument.
+ *
+ * do_tolower() is a hook for a derived facet to change the behavior of
+ * lowercasing. do_tolower() must always return the same result for
+ * the same input.
+ *
+ * @param c The wchar_t to convert.
+ * @return The lowercase wchar_t if convertible, else @a c.
+ */
+ virtual char_type
do_tolower(char_type) const;
+ /**
+ * @brief Convert array to lowercase.
+ *
+ * This virtual function converts each wchar_t in the range [lo,hi) to
+ * lowercase if possible. Other elements remain untouched.
+ *
+ * do_tolower() is a hook for a derived facet to change the behavior of
+ * lowercasing. do_tolower() must always return the same result for
+ * the same input.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @return @a hi.
+ */
virtual const char_type*
- do_tolower(char_type* __low, const char_type* __high) const;
-
- virtual char_type
+ do_tolower(char_type* __lo, const char_type* __hi) const;
+
+ /**
+ * @brief Widen char to wchar_t
+ *
+ * This virtual function converts the char to wchar_t using the
+ * simplest reasonable transformation. For an underived ctype<wchar_t>
+ * facet, the argument will be cast to wchar_t.
+ *
+ * do_widen() is a hook for a derived facet to change the behavior of
+ * widening. do_widen() must always return the same result for the
+ * same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param c The char to convert.
+ * @return The converted wchar_t.
+ */
+ virtual char_type
do_widen(char) const;
+ /**
+ * @brief Widen char array to wchar_t array
+ *
+ * This function converts each char in the input to wchar_t using the
+ * simplest reasonable transformation. For an underived ctype<wchar_t>
+ * facet, the argument will be copied, casting each element to wchar_t.
+ *
+ * do_widen() is a hook for a derived facet to change the behavior of
+ * widening. do_widen() must always return the same result for the
+ * same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param lo Pointer to start range.
+ * @param hi Pointer to end of range.
+ * @param to Pointer to the destination array.
+ * @return @a hi.
+ */
virtual const char*
- do_widen(const char* __low, const char* __high,
- char_type* __dest) const;
-
- virtual char
+ do_widen(const char* __lo, const char* __hi, char_type* __dest) const;
+
+ /**
+ * @brief Narrow wchar_t to char
+ *
+ * This virtual function converts the argument to char using
+ * the simplest reasonable transformation. If the conversion
+ * fails, dfault is returned instead. For an underived
+ * ctype<wchar_t> facet, @a c will be cast to char and
+ * returned.
+ *
+ * do_narrow() is a hook for a derived facet to change the
+ * behavior of narrowing. do_narrow() must always return the
+ * same result for the same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param c The wchar_t to convert.
+ * @param dfault Char to return if conversion fails.
+ * @return The converted char.
+ */
+ virtual char
do_narrow(char_type, char __dfault) const;
+ /**
+ * @brief Narrow wchar_t array to char array
+ *
+ * This virtual function converts each wchar_t in the range [lo,hi) to
+ * char using the simplest reasonable transformation and writes the
+ * results to the destination array. For any wchar_t in the input that
+ * cannot be converted, @a dfault is used instead. For an underived
+ * ctype<wchar_t> facet, the argument will be copied, casting each
+ * element to char.
+ *
+ * do_narrow() is a hook for a derived facet to change the behavior of
+ * narrowing. do_narrow() must always return the same result for the
+ * same input.
+ *
+ * Note: this is not what you want for codepage conversions. See
+ * codecvt for that.
+ *
+ * @param lo Pointer to start of range.
+ * @param hi Pointer to end of range.
+ * @param dfault Char to use if conversion fails.
+ * @param to Pointer to the destination array.
+ * @return @a hi.
+ */
virtual const char_type*
- do_narrow(const char_type* __low, const char_type* __high,
- char __dfault, char* __dest) const;
+ do_narrow(const char_type* __lo, const char_type* __hi,
+ char __dfault, char* __dest) const;
+ // For use at construction time only.
+ void
+ _M_initialize_ctype();
};
template<>
const ctype<wchar_t>&
use_facet<ctype<wchar_t> >(const locale& __loc);
-#endif //_GLIBCPP_USE_WCHAR_T
+#endif //_GLIBCXX_USE_WCHAR_T
- // Include host-specific ctype inlines.
+ // Include host and configuration specific ctype inlines.
#include <bits/ctype_inline.h>
// 22.2.1.2 Template class ctype_byname
class ctype_byname : public ctype<_CharT>
{
public:
- typedef _CharT char_type;
+ typedef _CharT char_type;
- explicit
- ctype_byname(const char*, size_t __refs = 0);
+ explicit
+ ctype_byname(const char* __s, size_t __refs = 0);
protected:
- virtual
- ~ctype_byname() { }
+ virtual
+ ~ctype_byname() { };
};
- // 22.2.1.4 Class ctype_byname specialization
+ // 22.2.1.4 Class ctype_byname specializations.
template<>
ctype_byname<char>::ctype_byname(const char*, size_t refs);
+ template<>
+ ctype_byname<wchar_t>::ctype_byname(const char*, size_t refs);
- template<typename _CharT, typename _InIter>
- class _Numeric_get; // forward
+ // 22.2.1.5 Template class codecvt
+ #include <bits/codecvt.h>
- // _Format_cache holds the information extracted from the numpunct<>
- // and moneypunct<> facets in a form optimized for parsing and
- // formatting. It is stored via a void* pointer in the pword()
- // array of an iosbase object passed to the _get and _put facets.
- // NB: contains no user-serviceable parts.
- template<typename _CharT>
- class _Format_cache
+ // 22.2.2 The numeric category.
+ class __num_base
+ {
+ public:
+ // NB: Code depends on the order of _S_atoms_out elements.
+ // Below are the indices into _S_atoms_out.
+ enum
+ {
+ _S_ominus,
+ _S_oplus,
+ _S_ox,
+ _S_oX,
+ _S_odigits,
+ _S_odigits_end = _S_odigits + 16,
+ _S_oudigits = _S_odigits_end,
+ _S_oudigits_end = _S_oudigits + 16,
+ _S_oe = _S_odigits + 14, // For scientific notation, 'e'
+ _S_oE = _S_oudigits + 14, // For scientific notation, 'E'
+ _S_oend = _S_oudigits_end
+ };
+
+ // A list of valid numeric literals for output. This array
+ // contains chars that will be passed through the current locale's
+ // ctype<_CharT>.widen() and then used to render numbers.
+ // For the standard "C" locale, this is
+ // "-+xX0123456789abcdef0123456789ABCDEF".
+ static const char* _S_atoms_out;
+
+ // String literal of acceptable (narrow) input, for num_get.
+ // "-+xX0123456789abcdefABCDEF"
+ static const char* _S_atoms_in;
+
+ enum
{
- public:
- // Types:
- typedef _CharT char_type;
- typedef char_traits<_CharT> traits_type;
- typedef basic_string<_CharT> string_type;
- typedef typename string_type::size_type size_type;
-
- // Forward decls and Friends:
- friend class locale;
- template<typename _Char, typename _InIter>
- friend class _Numeric_get;
- friend class num_get<_CharT>;
- friend class num_put<_CharT>;
- friend class time_get<_CharT>;
- friend class money_get<_CharT>;
- friend class time_put<_CharT>;
- friend class money_put<_CharT>;
+ _S_iminus,
+ _S_iplus,
+ _S_ix,
+ _S_iX,
+ _S_izero,
+ _S_ie = _S_izero + 14,
+ _S_iE = _S_izero + 20,
+ _S_iend = 26
+ };
- // Data Members:
+ // num_put
+ // Construct and return valid scanf format for floating point types.
+ static void
+ _S_format_float(const ios_base& __io, char* __fptr, char __mod);
+ };
- // ios_base::pword() reserved cell
- static int _S_pword_ix;
-
- // True iff data members are consistent with the current locale,
- // ie imbue sets this to false.
- bool _M_valid;
-
- // A list of valid numeric literals: for the standard "C" locale,
- // this would usually be: "-+xX0123456789abcdef0123456789ABCDEF"
- static const char _S_literals[];
-
- // NB: Code depends on the order of definitions of the names
- // these are indices into _S_literals, above.
- // This string is formatted for putting, not getting. (output, not input)
- enum
- {
- _S_minus,
- _S_plus,
- _S_x,
- _S_X,
- _S_digits,
- _S_digits_end = _S_digits + 16,
- _S_udigits = _S_digits_end,
- _S_udigits_end = _S_udigits + 16,
- _S_ee = _S_digits + 14, // For scientific notation, 'E'
- _S_Ee = _S_udigits + 14 // For scientific notation, 'e'
- };
+ template<typename _CharT>
+ struct __numpunct_cache : public locale::facet
+ {
+ const char* _M_grouping;
+ size_t _M_grouping_size;
+ bool _M_use_grouping;
+ const _CharT* _M_truename;
+ size_t _M_truename_size;
+ const _CharT* _M_falsename;
+ size_t _M_falsename_size;
+ _CharT _M_decimal_point;
+ _CharT _M_thousands_sep;
+
+ // A list of valid numeric literals for output: in the standard
+ // "C" locale, this is "-+xX0123456789abcdef0123456789ABCDEF".
+ // This array contains the chars after having been passed
+ // through the current locale's ctype<_CharT>.widen().
+ _CharT _M_atoms_out[__num_base::_S_oend];
+
+ // A list of valid numeric literals for input: in the standard
+ // "C" locale, this is "-+xX0123456789abcdefABCDEF"
+ // This array contains the chars after having been passed
+ // through the current locale's ctype<_CharT>.widen().
+ _CharT _M_atoms_in[__num_base::_S_iend];
+
+ bool _M_allocated;
+
+ __numpunct_cache(size_t __refs = 0) : facet(__refs),
+ _M_grouping(NULL), _M_grouping_size(0), _M_use_grouping(false),
+ _M_truename(NULL), _M_truename_size(0), _M_falsename(NULL),
+ _M_falsename_size(0), _M_decimal_point(_CharT()),
+ _M_thousands_sep(_CharT()), _M_allocated(false)
+ { }
+
+ ~__numpunct_cache();
+
+ void
+ _M_cache(const locale& __loc);
+ };
- // The sign used to separate decimal values: for standard US
- // locales, this would usually be: "."
- // Abstracted from numpunct::decimal_point().
- char_type _M_decimal_point;
+ template<typename _CharT>
+ __numpunct_cache<_CharT>::~__numpunct_cache()
+ {
+ if (_M_allocated)
+ {
+ delete [] _M_grouping;
+ delete [] _M_truename;
+ delete [] _M_falsename;
+ }
+ }
- // The sign used to separate groups of digits into smaller
- // strings that the eye can parse with less difficulty: for
- // standard US locales, this would usually be: ","
- // Abstracted from numpunct::thousands_sep().
- char_type _M_thousands_sep;
+ /**
+ * @brief Numpunct facet.
+ *
+ * This facet stores several pieces of information related to printing and
+ * scanning numbers, such as the decimal point character. It takes a
+ * template parameter specifying the char type. The numpunct facet is
+ * used by streams for many I/O operations involving numbers.
+ *
+ * The numpunct template uses protected virtual functions to provide the
+ * actual results. The public accessors forward the call to the virtual
+ * functions. These virtual functions are hooks for developers to
+ * implement the behavior they require from a numpunct facet.
+ */
+ template<typename _CharT>
+ class numpunct : public locale::facet
+ {
+ public:
+ // Types:
+ //@{
+ /// Public typedefs
+ typedef _CharT char_type;
+ typedef basic_string<_CharT> string_type;
+ //@}
+ typedef __numpunct_cache<_CharT> __cache_type;
- // However the US's "false" and "true" are translated.
- // From numpunct::truename() and numpunct::falsename(), respectively.
- string_type _M_truename;
- string_type _M_falsename;
+ protected:
+ __cache_type* _M_data;
- // If we are checking groupings. This should be equivalent to
- // numpunct::groupings().size() != 0
- bool _M_use_grouping;
+ public:
+ /// Numpunct facet id.
+ static locale::id id;
+
+ /**
+ * @brief Numpunct constructor.
+ *
+ * @param refs Refcount to pass to the base class.
+ */
+ explicit
+ numpunct(size_t __refs = 0) : facet(__refs), _M_data(NULL)
+ { _M_initialize_numpunct(); }
+
+ /**
+ * @brief Internal constructor. Not for general use.
+ *
+ * This is a constructor for use by the library itself to set up the
+ * predefined locale facets.
+ *
+ * @param cache __numpunct_cache object.
+ * @param refs Refcount to pass to the base class.
+ */
+ explicit
+ numpunct(__cache_type* __cache, size_t __refs = 0)
+ : facet(__refs), _M_data(__cache)
+ { _M_initialize_numpunct(); }
+
+ /**
+ * @brief Internal constructor. Not for general use.
+ *
+ * This is a constructor for use by the library itself to set up new
+ * locales.
+ *
+ * @param cloc The "C" locale.
+ * @param refs Refcount to pass to the base class.
+ */
+ explicit
+ numpunct(__c_locale __cloc, size_t __refs = 0)
+ : facet(__refs), _M_data(NULL)
+ { _M_initialize_numpunct(__cloc); }
+
+ /**
+ * @brief Return decimal point character.
+ *
+ * This function returns a char_type to use as a decimal point. It
+ * does so by returning returning
+ * numpunct<char_type>::do_decimal_point().
+ *
+ * @return @a char_type representing a decimal point.
+ */
+ char_type
+ decimal_point() const
+ { return this->do_decimal_point(); }
+
+ /**
+ * @brief Return thousands separator character.
+ *
+ * This function returns a char_type to use as a thousands
+ * separator. It does so by returning returning
+ * numpunct<char_type>::do_thousands_sep().
+ *
+ * @return char_type representing a thousands separator.
+ */
+ char_type
+ thousands_sep() const
+ { return this->do_thousands_sep(); }
+
+ /**
+ * @brief Return grouping specification.
+ *
+ * This function returns a string representing groupings for the
+ * integer part of a number. Groupings indicate where thousands
+ * separators should be inserted in the integer part of a number.
+ *
+ * Each char in the return string is interpret as an integer
+ * rather than a character. These numbers represent the number
+ * of digits in a group. The first char in the string
+ * represents the number of digits in the least significant
+ * group. If a char is negative, it indicates an unlimited
+ * number of digits for the group. If more chars from the
+ * string are required to group a number, the last char is used
+ * repeatedly.
+ *
+ * For example, if the grouping() returns "\003\002" and is
+ * applied to the number 123456789, this corresponds to
+ * 12,34,56,789. Note that if the string was "32", this would
+ * put more than 50 digits into the least significant group if
+ * the character set is ASCII.
+ *
+ * The string is returned by calling
+ * numpunct<char_type>::do_grouping().
+ *
+ * @return string representing grouping specification.
+ */
+ string
+ grouping() const
+ { return this->do_grouping(); }
+
+ /**
+ * @brief Return string representation of bool true.
+ *
+ * This function returns a string_type containing the text
+ * representation for true bool variables. It does so by calling
+ * numpunct<char_type>::do_truename().
+ *
+ * @return string_type representing printed form of true.
+ */
+ string_type
+ truename() const
+ { return this->do_truename(); }
+
+ /**
+ * @brief Return string representation of bool false.
+ *
+ * This function returns a string_type containing the text
+ * representation for false bool variables. It does so by calling
+ * numpunct<char_type>::do_falsename().
+ *
+ * @return string_type representing printed form of false.
+ */
+ string_type
+ falsename() const
+ { return this->do_falsename(); }
- // If we are using numpunct's groupings, this is the current
- // grouping string in effect (from numpunct::grouping()).
- string _M_grouping;
+ protected:
+ /// Destructor.
+ virtual
+ ~numpunct();
+
+ /**
+ * @brief Return decimal point character.
+ *
+ * Returns a char_type to use as a decimal point. This function is a
+ * hook for derived classes to change the value returned.
+ *
+ * @return @a char_type representing a decimal point.
+ */
+ virtual char_type
+ do_decimal_point() const
+ { return _M_data->_M_decimal_point; }
+
+ /**
+ * @brief Return thousands separator character.
+ *
+ * Returns a char_type to use as a thousands separator. This function
+ * is a hook for derived classes to change the value returned.
+ *
+ * @return @a char_type representing a thousands separator.
+ */
+ virtual char_type
+ do_thousands_sep() const
+ { return _M_data->_M_thousands_sep; }
+
+ /**
+ * @brief Return grouping specification.
+ *
+ * Returns a string representing groupings for the integer part of a
+ * number. This function is a hook for derived classes to change the
+ * value returned. @see grouping() for details.
+ *
+ * @return String representing grouping specification.
+ */
+ virtual string
+ do_grouping() const
+ { return _M_data->_M_grouping; }
+
+ /**
+ * @brief Return string representation of bool true.
+ *
+ * Returns a string_type containing the text representation for true
+ * bool variables. This function is a hook for derived classes to
+ * change the value returned.
+ *
+ * @return string_type representing printed form of true.
+ */
+ virtual string_type
+ do_truename() const
+ { return _M_data->_M_truename; }
+
+ /**
+ * @brief Return string representation of bool false.
+ *
+ * Returns a string_type containing the text representation for false
+ * bool variables. This function is a hook for derived classes to
+ * change the value returned.
+ *
+ * @return string_type representing printed form of false.
+ */
+ virtual string_type
+ do_falsename() const
+ { return _M_data->_M_falsename; }
- _Format_cache();
+ // For use at construction time only.
+ void
+ _M_initialize_numpunct(__c_locale __cloc = NULL);
+ };
- ~_Format_cache() throw() { }
+ template<typename _CharT>
+ locale::id numpunct<_CharT>::id;
- // Given a member of the ios heirarchy as an argument, extract
- // out all the current formatting information into a
- // _Format_cache object and return a pointer to it.
- static _Format_cache<_CharT>*
- _S_get(ios_base& __ios);
+ template<>
+ numpunct<char>::~numpunct();
- void
- _M_populate(ios_base&);
+ template<>
+ void
+ numpunct<char>::_M_initialize_numpunct(__c_locale __cloc);
- static void
- _S_callback(ios_base::event __event, ios_base& __ios, int __ix) throw();
- };
+#ifdef _GLIBCXX_USE_WCHAR_T
+ template<>
+ numpunct<wchar_t>::~numpunct();
- template<> _Format_cache<char>::_Format_cache();
-#ifdef _GLIBCPP_USE_WCHAR_T
- template<> _Format_cache<wchar_t>::_Format_cache();
+ template<>
+ void
+ numpunct<wchar_t>::_M_initialize_numpunct(__c_locale __cloc);
#endif
- // _Numeric_get is used by num_get, money_get, and time_get to help
- // in parsing out numbers.
- template<typename _CharT, typename _InIter>
- class _Numeric_get
+ template<typename _CharT>
+ class numpunct_byname : public numpunct<_CharT>
{
public:
- // Types:
- typedef _CharT char_type;
- typedef _InIter iter_type;
-
- // Forward decls and Friends:
- template<typename _Char, typename _InIterT>
- friend class num_get;
- template<typename _Char, typename _InIterT>
- friend class time_get;
- template<typename _Char, typename _InIterT>
- friend class money_get;
- template<typename _Char, typename _InIterT>
- friend class num_put;
- template<typename _Char, typename _InIterT>
- friend class time_put;
- template<typename _Char, typename _InIterT>
- friend class money_put;
-
- private:
- explicit
- _Numeric_get() { }
+ typedef _CharT char_type;
+ typedef basic_string<_CharT> string_type;
- virtual
- ~_Numeric_get() { }
+ explicit
+ numpunct_byname(const char* __s, size_t __refs = 0)
+ : numpunct<_CharT>(__refs)
+ {
+ if (std::strcmp(__s, "C") != 0 && std::strcmp(__s, "POSIX") != 0)
+ {
+ __c_locale __tmp;
+ this->_S_create_c_locale(__tmp, __s);
+ this->_M_initialize_numpunct(__tmp);
+ this->_S_destroy_c_locale(__tmp);
+ }
+ }
- iter_type
- _M_get_digits(iter_type __in, iter_type __end) const;
+ protected:
+ virtual
+ ~numpunct_byname() { }
};
+ /**
+ * @brief Facet for parsing number strings.
+ *
+ * This facet encapsulates the code to parse and return a number
+ * from a string. It is used by the istream numeric extraction
+ * operators.
+ *
+ * The num_get template uses protected virtual functions to provide the
+ * actual results. The public accessors forward the call to the virtual
+ * functions. These virtual functions are hooks for developers to
+ * implement the behavior they require from the num_get facet.
+ */
template<typename _CharT, typename _InIter>
class num_get : public locale::facet
{
public:
// Types:
- typedef _CharT char_type;
- typedef _InIter iter_type;
- typedef char_traits<_CharT> __traits_type;
-
- static locale::id id;
-
- explicit
- num_get(size_t __refs = 0) : locale::facet(__refs) { }
-
- iter_type
+ //@{
+ /// Public typedefs
+ typedef _CharT char_type;
+ typedef _InIter iter_type;
+ //@}
+
+ /// Numpunct facet id.
+ static locale::id id;
+
+ /**
+ * @brief Constructor performs initialization.
+ *
+ * This is the constructor provided by the standard.
+ *
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ num_get(size_t __refs = 0) : facet(__refs) { }
+
+ /**
+ * @brief Numeric parsing.
+ *
+ * Parses the input stream into the bool @a v. It does so by calling
+ * num_put::do_put().
+ *
+ * If ios_base::boolalpha is set, attempts to read
+ * ctype<CharT>::truename() or ctype<CharT>::falsename(). Sets
+ * @a v to true or false if successful. Sets err to
+ * ios_base::failbit if reading the string fails. Sets err to
+ * ios_base::eofbit if the stream is emptied.
+ *
+ * If ios_base::boolalpha is not set, proceeds as with reading a long,
+ * except if the value is 1, sets @a v to true, if the value is 0, sets
+ * @a v to false, and otherwise set err to ios_base::failbit.
+ *
+ * @param in Start of input stream.
+ * @param end End of input stream.
+ * @param io Source of locale and flags.
+ * @param err Error flags to set.
+ * @param v Value to format and insert.
+ * @return Iterator after reading.
+ */
+ iter_type
get(iter_type __in, iter_type __end, ios_base& __io,
ios_base::iostate& __err, bool& __v) const
- { return do_get(__in, __end, __io, __err, __v); }
-
-#ifdef _GLIBCPP_RESOLVE_LIB_DEFECTS
- iter_type
- get(iter_type __in, iter_type __end, ios_base& __io,
- ios_base::iostate& __err, short& __v) const
- { return do_get(__in, __end, __io, __err, __v); }
-
- iter_type
- get(iter_type __in, iter_type __end, ios_base& __io,
- ios_base::iostate& __err, int& __v) const
- { return do_get(__in, __end, __io, __err, __v); }
-#endif
-
+ { return this->do_get(__in, __end, __io, __err, __v); }
+
+ //@{
+ /**
+ * @brief Numeric parsing.
+ *
+ * Parses the input stream into the integral variable @a v. It does so
+ * by calling num_put::do_put().
+ *
+ * Parsing is affected by the flag settings in @a io.
+ *
+ * The basic parse is affected by the value of io.flags() &
+ * ios_base::basefield. If equal to ios_base::oct, parses like the
+ * scanf %o specifier. Else if equal to ios_base::hex, parses like %X
+ * specifier. Else if basefield equal to 0, parses like the %i
+ * specifier. Otherwise, parses like %d for signed and %u for unsigned
+ * types. The matching type length modifier is also used.
+ *
+ * Digit grouping is intrepreted according to numpunct::grouping() and
+ * numpunct::thousands_sep(). If the pattern of digit groups isn't
+ * consistent, sets err to ios_base::failbit.
+ *
+ * If parsing the string yields a valid value for @a v, @a v is set.
+ * Otherwise, sets err to ios_base::failbit and leaves @a v unaltered.
+ * Sets err to ios_base::eofbit if the stream is emptied.
+ *
+ * @param in Start of input stream.
+ * @param end End of input stream.
+ * @param io Source of locale and flags.
+ * @param err Error flags to set.
+ * @param v Value to format and insert.
+ * @return Iterator after reading.
+ */
iter_type
- get(iter_type __in, iter_type __end, ios_base& __io,
- ios_base::iostate& __err, long& __v) const
- { return do_get(__in, __end, __io, __err, __v); }
-
-#ifdef _GLIBCPP_USE_LONG_LONG
- iter_type
get(iter_type __in, iter_type __end, ios_base& __io,
- ios_base::iostate& __err, long long& __v) const
- { return do_get(__in, __end, __io, __err, __v); }
-#endif
+ ios_base::iostate& __err, long& __v) const
+ { return this->do_get(__in, __end, __io, __err, __v); }
- iter_type
+ iter_type
get(iter_type __in, iter_type __end, ios_base& __io,
ios_base::iostate& __err, unsigned short& __v) const
- { return do_get(__in, __end, __io, __err, __v); }
+ { return this->do_get(__in, __end, __io, __err, __v); }
- iter_type
+ iter_type
get(iter_type __in, iter_type __end, ios_base& __io,
ios_base::iostate& __err, unsigned int& __v) const
- { return do_get(__in, __end, __io, __err, __v); }
+ { return this->do_get(__in, __end, __io, __err, __v); }
- iter_type
+ iter_type
get(iter_type __in, iter_type __end, ios_base& __io,
ios_base::iostate& __err, unsigned long& __v) const
- { return do_get(__in, __end, __io, __err, __v); }
+ { return this->do_get(__in, __end, __io, __err, __v); }
+
+#ifdef _GLIBCXX_USE_LONG_LONG
+ iter_type
+ get(iter_type __in, iter_type __end, ios_base& __io,
+ ios_base::iostate& __err, long long& __v) const
+ { return this->do_get(__in, __end, __io, __err, __v); }
-#ifdef _GLIBCPP_USE_LONG_LONG
- iter_type
+ iter_type
get(iter_type __in, iter_type __end, ios_base& __io,
ios_base::iostate& __err, unsigned long long& __v) const
- { return do_get(__in, __end, __io, __err, __v); }
+ { return this->do_get(__in, __end, __io, __err, __v); }
#endif
-
- iter_type
+ //@}
+
+ //@{
+ /**
+ * @brief Numeric parsing.
+ *
+ * Parses the input stream into the integral variable @a v. It does so
+ * by calling num_put::do_put().
+ *
+ * The input characters are parsed like the scanf %g specifier. The
+ * matching type length modifier is also used.
+ *
+ * The decimal point character used is numpunct::decimal_point().
+ * Digit grouping is intrepreted according to numpunct::grouping() and
+ * numpunct::thousands_sep(). If the pattern of digit groups isn't
+ * consistent, sets err to ios_base::failbit.
+ *
+ * If parsing the string yields a valid value for @a v, @a v is set.
+ * Otherwise, sets err to ios_base::failbit and leaves @a v unaltered.
+ * Sets err to ios_base::eofbit if the stream is emptied.
+ *
+ * @param in Start of input stream.
+ * @param end End of input stream.
+ * @param io Source of locale and flags.
+ * @param err Error flags to set.
+ * @param v Value to format and insert.
+ * @return Iterator after reading.
+ */
+ iter_type
get(iter_type __in, iter_type __end, ios_base& __io,
ios_base::iostate& __err, float& __v) const
- { return do_get(__in, __end, __io, __err, __v); }
+ { return this->do_get(__in, __end, __io, __err, __v); }
- iter_type
+ iter_type
get(iter_type __in, iter_type __end, ios_base& __io,
ios_base::iostate& __err, double& __v) const
- { return do_get(__in, __end, __io, __err, __v); }
+ { return this->do_get(__in, __end, __io, __err, __v); }
- iter_type
+ iter_type
get(iter_type __in, iter_type __end, ios_base& __io,
ios_base::iostate& __err, long double& __v) const
- { return do_get(__in, __end, __io, __err, __v); }
-
- iter_type
+ { return this->do_get(__in, __end, __io, __err, __v); }
+ //@}
+
+ /**
+ * @brief Numeric parsing.
+ *
+ * Parses the input stream into the pointer variable @a v. It does so
+ * by calling num_put::do_put().
+ *
+ * The input characters are parsed like the scanf %p specifier.
+ *
+ * Digit grouping is intrepreted according to numpunct::grouping() and
+ * numpunct::thousands_sep(). If the pattern of digit groups isn't
+ * consistent, sets err to ios_base::failbit.
+ *
+ * Note that the digit grouping effect for pointers is a bit ambiguous
+ * in the standard and shouldn't be relied on. See DR 344.
+ *
+ * If parsing the string yields a valid value for @a v, @a v is set.
+ * Otherwise, sets err to ios_base::failbit and leaves @a v unaltered.
+ * Sets err to ios_base::eofbit if the stream is emptied.
+ *
+ * @param in Start of input stream.
+ * @param end End of input stream.
+ * @param io Source of locale and flags.
+ * @param err Error flags to set.
+ * @param v Value to format and insert.
+ * @return Iterator after reading.
+ */
+ iter_type
get(iter_type __in, iter_type __end, ios_base& __io,
ios_base::iostate& __err, void*& __v) const
- { return do_get(__in, __end, __io, __err, __v); }
+ { return this->do_get(__in, __end, __io, __err, __v); }
protected:
+ /// Destructor.
virtual ~num_get() { }
- // This consolidates the extraction, storage and
- // error-processing parts of the do_get(...) overloaded member
- // functions.
- // NB: This is specialized for char.
- void
- _M_extract(iter_type __beg, iter_type __end, ios_base& __io,
- ios_base::iostate& __err, char* __xtrc,
- int& __base, bool __fp = true) const;
-
- virtual iter_type
+ iter_type
+ _M_extract_float(iter_type, iter_type, ios_base&, ios_base::iostate&,
+ string& __xtrc) const;
+
+ template<typename _ValueT>
+ iter_type
+ _M_extract_int(iter_type, iter_type, ios_base&, ios_base::iostate&,
+ _ValueT& __v) const;
+
+ //@{
+ /**
+ * @brief Numeric parsing.
+ *
+ * Parses the input stream into the variable @a v. This function is a
+ * hook for derived classes to change the value returned. @see get()
+ * for more details.
+ *
+ * @param in Start of input stream.
+ * @param end End of input stream.
+ * @param io Source of locale and flags.
+ * @param err Error flags to set.
+ * @param v Value to format and insert.
+ * @return Iterator after reading.
+ */
+ virtual iter_type
do_get(iter_type, iter_type, ios_base&, ios_base::iostate&, bool&) const;
-#ifdef _GLIBCPP_RESOLVE_LIB_DEFECTS
- virtual iter_type
- do_get(iter_type, iter_type, ios_base&, ios_base::iostate&, short&) const;
- virtual iter_type
- do_get(iter_type, iter_type, ios_base&, ios_base::iostate&, int&) const;
-#endif
- virtual iter_type
- do_get (iter_type, iter_type, ios_base&, ios_base::iostate&, long&) const;
-#ifdef _GLIBCPP_USE_LONG_LONG
- virtual iter_type
- do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
- long long&) const;
-#endif
- virtual iter_type
- do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
+
+ virtual iter_type
+ do_get(iter_type, iter_type, ios_base&, ios_base::iostate&, long&) const;
+
+ virtual iter_type
+ do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
unsigned short&) const;
- virtual iter_type
- do_get(iter_type, iter_type, ios_base&,
- ios_base::iostate& __err, unsigned int&) const;
- virtual iter_type
- do_get(iter_type, iter_type, ios_base&,
- ios_base::iostate& __err, unsigned long&) const;
-#ifdef _GLIBCPP_USE_LONG_LONG
- virtual iter_type
- do_get(iter_type, iter_type, ios_base&,
- ios_base::iostate& __err, unsigned long long&) const;
+
+ virtual iter_type
+ do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
+ unsigned int&) const;
+
+ virtual iter_type
+ do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
+ unsigned long&) const;
+
+#ifdef _GLIBCXX_USE_LONG_LONG
+ virtual iter_type
+ do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
+ long long&) const;
+
+ virtual iter_type
+ do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
+ unsigned long long&) const;
#endif
- virtual iter_type
- do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
+
+ virtual iter_type
+ do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
float&) const;
- virtual iter_type
- do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
+ virtual iter_type
+ do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
double&) const;
- virtual iter_type
- do_get(iter_type, iter_type, ios_base&,
- ios_base::iostate& __err, long double&) const;
+ virtual iter_type
+ do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
+ long double&) const;
- virtual iter_type
- do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
+ virtual iter_type
+ do_get(iter_type, iter_type, ios_base&, ios_base::iostate& __err,
void*&) const;
+ //@}
};
- // Declare specialized extraction member function.
- template<>
- void
- num_get<char, istreambuf_iterator<char> >::
- _M_extract(istreambuf_iterator<char> __beg,
- istreambuf_iterator<char> __end, ios_base& __io,
- ios_base::iostate& __err, char* __xtrc,
- int& __base, bool __fp) const;
-
- // _Numeric_put is used by num_put, money_put, and time_put
- // to help in formatting out numbers.
- template<typename _CharT, typename _OutIter>
- class _Numeric_put
- {
- public:
- typedef _CharT char_type;
- typedef _OutIter iter_type;
- protected:
- explicit
- _Numeric_put() { }
-
- virtual
- ~_Numeric_put() { }
- };
-
+ template<typename _CharT, typename _InIter>
+ locale::id num_get<_CharT, _InIter>::id;
+
+
+ /**
+ * @brief Facet for converting numbers to strings.
+ *
+ * This facet encapsulates the code to convert a number to a string. It is
+ * used by the ostream numeric insertion operators.
+ *
+ * The num_put template uses protected virtual functions to provide the
+ * actual results. The public accessors forward the call to the virtual
+ * functions. These virtual functions are hooks for developers to
+ * implement the behavior they require from the num_put facet.
+ */
template<typename _CharT, typename _OutIter>
class num_put : public locale::facet
{
public:
// Types:
- typedef _CharT char_type;
- typedef _OutIter iter_type;
-
- static locale::id id;
-
- explicit
- num_put(size_t __refs = 0) : locale::facet(__refs) { }
-
- iter_type
+ //@{
+ /// Public typedefs
+ typedef _CharT char_type;
+ typedef _OutIter iter_type;
+ //@}
+
+ /// Numpunct facet id.
+ static locale::id id;
+
+ /**
+ * @brief Constructor performs initialization.
+ *
+ * This is the constructor provided by the standard.
+ *
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ num_put(size_t __refs = 0) : facet(__refs) { }
+
+ /**
+ * @brief Numeric formatting.
+ *
+ * Formats the boolean @a v and inserts it into a stream. It does so
+ * by calling num_put::do_put().
+ *
+ * If ios_base::boolalpha is set, writes ctype<CharT>::truename() or
+ * ctype<CharT>::falsename(). Otherwise formats @a v as an int.
+ *
+ * @param s Stream to write to.
+ * @param io Source of locale and flags.
+ * @param fill Char_type to use for filling.
+ * @param v Value to format and insert.
+ * @return Iterator after writing.
+ */
+ iter_type
put(iter_type __s, ios_base& __f, char_type __fill, bool __v) const
- { return do_put(__s, __f, __fill, __v); }
-
- iter_type
+ { return this->do_put(__s, __f, __fill, __v); }
+
+ //@{
+ /**
+ * @brief Numeric formatting.
+ *
+ * Formats the integral value @a v and inserts it into a
+ * stream. It does so by calling num_put::do_put().
+ *
+ * Formatting is affected by the flag settings in @a io.
+ *
+ * The basic format is affected by the value of io.flags() &
+ * ios_base::basefield. If equal to ios_base::oct, formats like the
+ * printf %o specifier. Else if equal to ios_base::hex, formats like
+ * %x or %X with ios_base::uppercase unset or set respectively.
+ * Otherwise, formats like %d, %ld, %lld for signed and %u, %lu, %llu
+ * for unsigned values. Note that if both oct and hex are set, neither
+ * will take effect.
+ *
+ * If ios_base::showpos is set, '+' is output before positive values.
+ * If ios_base::showbase is set, '0' precedes octal values (except 0)
+ * and '0[xX]' precedes hex values.
+ *
+ * Thousands separators are inserted according to numpunct::grouping()
+ * and numpunct::thousands_sep(). The decimal point character used is
+ * numpunct::decimal_point().
+ *
+ * If io.width() is non-zero, enough @a fill characters are inserted to
+ * make the result at least that wide. If
+ * (io.flags() & ios_base::adjustfield) == ios_base::left, result is
+ * padded at the end. If ios_base::internal, then padding occurs
+ * immediately after either a '+' or '-' or after '0x' or '0X'.
+ * Otherwise, padding occurs at the beginning.
+ *
+ * @param s Stream to write to.
+ * @param io Source of locale and flags.
+ * @param fill Char_type to use for filling.
+ * @param v Value to format and insert.
+ * @return Iterator after writing.
+ */
+ iter_type
put(iter_type __s, ios_base& __f, char_type __fill, long __v) const
- { return do_put(__s, __f, __fill, __v); }
+ { return this->do_put(__s, __f, __fill, __v); }
- iter_type
- put(iter_type __s, ios_base& __f, char_type __fill,
+ iter_type
+ put(iter_type __s, ios_base& __f, char_type __fill,
unsigned long __v) const
- { return do_put(__s, __f, __fill, __v); }
+ { return this->do_put(__s, __f, __fill, __v); }
-#ifdef _GLIBCPP_USE_LONG_LONG
- iter_type
+#ifdef _GLIBCXX_USE_LONG_LONG
+ iter_type
put(iter_type __s, ios_base& __f, char_type __fill, long long __v) const
- { return do_put(__s, __f, __fill, __v); }
+ { return this->do_put(__s, __f, __fill, __v); }
- iter_type
- put(iter_type __s, ios_base& __f, char_type __fill,
+ iter_type
+ put(iter_type __s, ios_base& __f, char_type __fill,
unsigned long long __v) const
- { return do_put(__s, __f, __fill, __v); }
+ { return this->do_put(__s, __f, __fill, __v); }
#endif
-
- iter_type
+ //@}
+
+ //@{
+ /**
+ * @brief Numeric formatting.
+ *
+ * Formats the floating point value @a v and inserts it into a stream.
+ * It does so by calling num_put::do_put().
+ *
+ * Formatting is affected by the flag settings in @a io.
+ *
+ * The basic format is affected by the value of io.flags() &
+ * ios_base::floatfield. If equal to ios_base::fixed, formats like the
+ * printf %f specifier. Else if equal to ios_base::scientific, formats
+ * like %e or %E with ios_base::uppercase unset or set respectively.
+ * Otherwise, formats like %g or %G depending on uppercase. Note that
+ * if both fixed and scientific are set, the effect will also be like
+ * %g or %G.
+ *
+ * The output precision is given by io.precision(). This precision is
+ * capped at numeric_limits::digits10 + 2 (different for double and
+ * long double). The default precision is 6.
+ *
+ * If ios_base::showpos is set, '+' is output before positive values.
+ * If ios_base::showpoint is set, a decimal point will always be
+ * output.
+ *
+ * Thousands separators are inserted according to numpunct::grouping()
+ * and numpunct::thousands_sep(). The decimal point character used is
+ * numpunct::decimal_point().
+ *
+ * If io.width() is non-zero, enough @a fill characters are inserted to
+ * make the result at least that wide. If
+ * (io.flags() & ios_base::adjustfield) == ios_base::left, result is
+ * padded at the end. If ios_base::internal, then padding occurs
+ * immediately after either a '+' or '-' or after '0x' or '0X'.
+ * Otherwise, padding occurs at the beginning.
+ *
+ * @param s Stream to write to.
+ * @param io Source of locale and flags.
+ * @param fill Char_type to use for filling.
+ * @param v Value to format and insert.
+ * @return Iterator after writing.
+ */
+ iter_type
put(iter_type __s, ios_base& __f, char_type __fill, double __v) const
- { return do_put(__s, __f, __fill, __v); }
+ { return this->do_put(__s, __f, __fill, __v); }
- iter_type
- put(iter_type __s, ios_base& __f, char_type __fill,
+ iter_type
+ put(iter_type __s, ios_base& __f, char_type __fill,
long double __v) const
- { return do_put(__s, __f, __fill, __v); }
-
- iter_type
- put(iter_type __s, ios_base& __f, char_type __fill,
+ { return this->do_put(__s, __f, __fill, __v); }
+ //@}
+
+ /**
+ * @brief Numeric formatting.
+ *
+ * Formats the pointer value @a v and inserts it into a stream. It
+ * does so by calling num_put::do_put().
+ *
+ * This function formats @a v as an unsigned long with ios_base::hex
+ * and ios_base::showbase set.
+ *
+ * @param s Stream to write to.
+ * @param io Source of locale and flags.
+ * @param fill Char_type to use for filling.
+ * @param v Value to format and insert.
+ * @return Iterator after writing.
+ */
+ iter_type
+ put(iter_type __s, ios_base& __f, char_type __fill,
const void* __v) const
- { return do_put(__s, __f, __fill, __v); }
+ { return this->do_put(__s, __f, __fill, __v); }
protected:
- virtual
+ template<typename _ValueT>
+ iter_type
+ _M_insert_float(iter_type, ios_base& __io, char_type __fill,
+ char __mod, _ValueT __v) const;
+
+ void
+ _M_group_float(const char* __grouping, size_t __grouping_size,
+ char_type __sep, const char_type* __p, char_type* __new,
+ char_type* __cs, int& __len) const;
+
+ template<typename _ValueT>
+ iter_type
+ _M_insert_int(iter_type, ios_base& __io, char_type __fill,
+ _ValueT __v) const;
+
+ void
+ _M_group_int(const char* __grouping, size_t __grouping_size,
+ char_type __sep, ios_base& __io, char_type* __new,
+ char_type* __cs, int& __len) const;
+
+ void
+ _M_pad(char_type __fill, streamsize __w, ios_base& __io,
+ char_type* __new, const char_type* __cs, int& __len) const;
+
+ /// Destructor.
+ virtual
~num_put() { };
- virtual iter_type
+ //@{
+ /**
+ * @brief Numeric formatting.
+ *
+ * These functions do the work of formatting numeric values and
+ * inserting them into a stream. This function is a hook for derived
+ * classes to change the value returned.
+ *
+ * @param s Stream to write to.
+ * @param io Source of locale and flags.
+ * @param fill Char_type to use for filling.
+ * @param v Value to format and insert.
+ * @return Iterator after writing.
+ */
+ virtual iter_type
do_put(iter_type, ios_base&, char_type __fill, bool __v) const;
- virtual iter_type
+ virtual iter_type
do_put(iter_type, ios_base&, char_type __fill, long __v) const;
-#ifdef _GLIBCPP_USE_LONG_LONG
- virtual iter_type
- do_put(iter_type, ios_base&, char_type __fill, long long __v) const;
-#endif
-
- virtual iter_type
+ virtual iter_type
do_put(iter_type, ios_base&, char_type __fill, unsigned long) const;
-#ifdef _GLIBCPP_USE_LONG_LONG
+#ifdef _GLIBCXX_USE_LONG_LONG
+ virtual iter_type
+ do_put(iter_type, ios_base&, char_type __fill, long long __v) const;
+
virtual iter_type
do_put(iter_type, ios_base&, char_type __fill, unsigned long long) const;
#endif
- virtual iter_type
+ virtual iter_type
do_put(iter_type, ios_base&, char_type __fill, double __v) const;
- virtual iter_type
+ virtual iter_type
do_put(iter_type, ios_base&, char_type __fill, long double __v) const;
- virtual iter_type
+ virtual iter_type
do_put(iter_type, ios_base&, char_type __fill, const void* __v) const;
+ //@}
};
+ template <typename _CharT, typename _OutIter>
+ locale::id num_put<_CharT, _OutIter>::id;
+
+
+ /**
+ * @brief Facet for localized string comparison.
+ *
+ * This facet encapsulates the code to compare strings in a localized
+ * manner.
+ *
+ * The collate template uses protected virtual functions to provide
+ * the actual results. The public accessors forward the call to
+ * the virtual functions. These virtual functions are hooks for
+ * developers to implement the behavior they require from the
+ * collate facet.
+ */
template<typename _CharT>
- class _Punct : public locale::facet
+ class collate : public locale::facet
{
public:
// Types:
- typedef _CharT char_type;
- typedef basic_string<_CharT> string_type;
-
- char_type
- decimal_point() const
- { return do_decimal_point(); }
+ //@{
+ /// Public typedefs
+ typedef _CharT char_type;
+ typedef basic_string<_CharT> string_type;
+ //@}
- char_type
- thousands_sep() const
- { return do_thousands_sep(); }
-
- string
- grouping() const
- { return do_grouping(); }
protected:
+ // Underlying "C" library locale information saved from
+ // initialization, needed by collate_byname as well.
+ __c_locale _M_c_locale_collate;
- explicit
- _Punct(size_t __refs = 0) : locale::facet(__refs) { }
-
- virtual
- ~_Punct() { }
-
- virtual char_type
- do_decimal_point() const
- { return _M_decimal_point; }
-
- virtual char_type
- do_thousands_sep() const
- { return _M_thousands_sep; }
+ public:
+ /// Numpunct facet id.
+ static locale::id id;
+
+ /**
+ * @brief Constructor performs initialization.
+ *
+ * This is the constructor provided by the standard.
+ *
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ collate(size_t __refs = 0)
+ : facet(__refs)
+ { _M_c_locale_collate = _S_get_c_locale(); }
+
+ /**
+ * @brief Internal constructor. Not for general use.
+ *
+ * This is a constructor for use by the library itself to set up new
+ * locales.
+ *
+ * @param cloc The "C" locale.
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ collate(__c_locale __cloc, size_t __refs = 0)
+ : facet(__refs)
+ { _M_c_locale_collate = _S_clone_c_locale(__cloc); }
+
+ /**
+ * @brief Compare two strings.
+ *
+ * This function compares two strings and returns the result by calling
+ * collate::do_compare().
+ *
+ * @param lo1 Start of string 1.
+ * @param hi1 End of string 1.
+ * @param lo2 Start of string 2.
+ * @param hi2 End of string 2.
+ * @return 1 if string1 > string2, -1 if string1 < string2, else 0.
+ */
+ int
+ compare(const _CharT* __lo1, const _CharT* __hi1,
+ const _CharT* __lo2, const _CharT* __hi2) const
+ { return this->do_compare(__lo1, __hi1, __lo2, __hi2); }
+
+ /**
+ * @brief Transform string to comparable form.
+ *
+ * This function is a wrapper for strxfrm functionality. It takes the
+ * input string and returns a modified string that can be directly
+ * compared to other transformed strings. In the "C" locale, this
+ * function just returns a copy of the input string. In some other
+ * locales, it may replace two chars with one, change a char for
+ * another, etc. It does so by returning collate::do_transform().
+ *
+ * @param lo Start of string.
+ * @param hi End of string.
+ * @return Transformed string_type.
+ */
+ string_type
+ transform(const _CharT* __lo, const _CharT* __hi) const
+ { return this->do_transform(__lo, __hi); }
+
+ /**
+ * @brief Return hash of a string.
+ *
+ * This function computes and returns a hash on the input string. It
+ * does so by returning collate::do_hash().
+ *
+ * @param lo Start of string.
+ * @param hi End of string.
+ * @return Hash value.
+ */
+ long
+ hash(const _CharT* __lo, const _CharT* __hi) const
+ { return this->do_hash(__lo, __hi); }
- virtual string
- do_grouping() const
- { return _M_grouping; }
+ // Used to abstract out _CharT bits in virtual member functions, below.
+ int
+ _M_compare(const _CharT*, const _CharT*) const;
- private:
- char_type _M_decimal_point;
- char_type _M_thousands_sep;
- string _M_grouping;
-
- protected:
- // for use at construction time only:
- void
- _M_init(char_type __d, char_type __t, const string& __g)
- {
- _M_decimal_point = __d;
- _M_thousands_sep = __t;
- _M_grouping = __g;
- }
+ size_t
+ _M_transform(_CharT*, const _CharT*, size_t) const;
+ protected:
+ /// Destructor.
+ virtual
+ ~collate()
+ { _S_destroy_c_locale(_M_c_locale_collate); }
+
+ /**
+ * @brief Compare two strings.
+ *
+ * This function is a hook for derived classes to change the value
+ * returned. @see compare().
+ *
+ * @param lo1 Start of string 1.
+ * @param hi1 End of string 1.
+ * @param lo2 Start of string 2.
+ * @param hi2 End of string 2.
+ * @return 1 if string1 > string2, -1 if string1 < string2, else 0.
+ */
+ virtual int
+ do_compare(const _CharT* __lo1, const _CharT* __hi1,
+ const _CharT* __lo2, const _CharT* __hi2) const;
+
+ /**
+ * @brief Transform string to comparable form.
+ *
+ * This function is a hook for derived classes to change the value
+ * returned.
+ *
+ * @param lo1 Start of string 1.
+ * @param hi1 End of string 1.
+ * @param lo2 Start of string 2.
+ * @param hi2 End of string 2.
+ * @return 1 if string1 > string2, -1 if string1 < string2, else 0.
+ */
+ virtual string_type
+ do_transform(const _CharT* __lo, const _CharT* __hi) const;
+
+ /**
+ * @brief Return hash of a string.
+ *
+ * This function computes and returns a hash on the input string. This
+ * function is a hook for derived classes to change the value returned.
+ *
+ * @param lo Start of string.
+ * @param hi End of string.
+ * @return Hash value.
+ */
+ virtual long
+ do_hash(const _CharT* __lo, const _CharT* __hi) const;
};
template<typename _CharT>
- class _Numpunct : public _Punct<_CharT>
- {
- public:
- // Types:
- typedef _CharT char_type;
- typedef basic_string<_CharT> string_type;
-
- string_type
- truename() const
- { return do_truename(); }
+ locale::id collate<_CharT>::id;
- string_type
- falsename() const
- { return do_falsename(); }
-
- protected:
- explicit
- _Numpunct(size_t __refs = 0) : _Punct<_CharT> (__refs) { }
-
- virtual
- ~_Numpunct() { }
+ // Specializations.
+ template<>
+ int
+ collate<char>::_M_compare(const char*, const char*) const;
- virtual string_type
- do_truename() const
- { return _M_truename; }
+ template<>
+ size_t
+ collate<char>::_M_transform(char*, const char*, size_t) const;
- virtual string_type
- do_falsename() const
- { return _M_falsename; }
+#ifdef _GLIBCXX_USE_WCHAR_T
+ template<>
+ int
+ collate<wchar_t>::_M_compare(const wchar_t*, const wchar_t*) const;
- private:
- string_type _M_truename;
- string_type _M_falsename;
-
- protected:
- // For use only during construction
- void
- _M_boolnames_init(const string_type& __t, const string_type& __f)
- {
- _M_truename = __t;
- _M_falsename = __f;
- }
-
- };
+ template<>
+ size_t
+ collate<wchar_t>::_M_transform(wchar_t*, const wchar_t*, size_t) const;
+#endif
template<typename _CharT>
- class numpunct : public _Numpunct<_CharT>
+ class collate_byname : public collate<_CharT>
{
public:
+ //@{
+ /// Public typedefs
typedef _CharT char_type;
typedef basic_string<_CharT> string_type;
+ //@}
- static locale::id id;
+ explicit
+ collate_byname(const char* __s, size_t __refs = 0)
+ : collate<_CharT>(__refs)
+ {
+ if (std::strcmp(__s, "C") != 0 && std::strcmp(__s, "POSIX") != 0)
+ {
+ this->_S_destroy_c_locale(this->_M_c_locale_collate);
+ this->_S_create_c_locale(this->_M_c_locale_collate, __s);
+ }
+ }
- explicit
- numpunct(size_t __refs = 0) : _Numpunct<_CharT>(__refs) { }
protected:
-
- virtual
- ~numpunct() { }
+ virtual
+ ~collate_byname() { }
};
- template<>
- numpunct<char>::numpunct(size_t __refs): _Numpunct<char>(__refs)
- {
- _M_init('.', ',', "");
- _M_boolnames_init("true", "false");
- }
-#ifdef _GLIBCPP_USE_WCHAR_T
- template<>
- numpunct<wchar_t>::numpunct(size_t __refs): _Numpunct<wchar_t>(__refs)
- {
- _M_init(L'.', L',', "");
- _M_boolnames_init(L"true", L"false");
- }
-#endif
+ /**
+ * @brief Time format ordering data.
+ *
+ * This class provides an enum representing different orderings of day,
+ * month, and year.
+ */
+ class time_base
+ {
+ public:
+ enum dateorder { no_order, dmy, mdy, ymd, ydm };
+ };
template<typename _CharT>
- class numpunct_byname : public numpunct<_CharT>
+ struct __timepunct_cache : public locale::facet
{
- public:
- typedef _CharT char_type;
- typedef basic_string<_CharT> string_type;
-
- explicit
- numpunct_byname(const char*, size_t __refs = 0);
-
- protected:
- virtual
- ~numpunct_byname() { }
+ // List of all known timezones, with GMT first.
+ static const _CharT* _S_timezones[14];
+
+ const _CharT* _M_date_format;
+ const _CharT* _M_date_era_format;
+ const _CharT* _M_time_format;
+ const _CharT* _M_time_era_format;
+ const _CharT* _M_date_time_format;
+ const _CharT* _M_date_time_era_format;
+ const _CharT* _M_am;
+ const _CharT* _M_pm;
+ const _CharT* _M_am_pm_format;
+
+ // Day names, starting with "C"'s Sunday.
+ const _CharT* _M_day1;
+ const _CharT* _M_day2;
+ const _CharT* _M_day3;
+ const _CharT* _M_day4;
+ const _CharT* _M_day5;
+ const _CharT* _M_day6;
+ const _CharT* _M_day7;
+
+ // Abbreviated day names, starting with "C"'s Sun.
+ const _CharT* _M_aday1;
+ const _CharT* _M_aday2;
+ const _CharT* _M_aday3;
+ const _CharT* _M_aday4;
+ const _CharT* _M_aday5;
+ const _CharT* _M_aday6;
+ const _CharT* _M_aday7;
+
+ // Month names, starting with "C"'s January.
+ const _CharT* _M_month01;
+ const _CharT* _M_month02;
+ const _CharT* _M_month03;
+ const _CharT* _M_month04;
+ const _CharT* _M_month05;
+ const _CharT* _M_month06;
+ const _CharT* _M_month07;
+ const _CharT* _M_month08;
+ const _CharT* _M_month09;
+ const _CharT* _M_month10;
+ const _CharT* _M_month11;
+ const _CharT* _M_month12;
+
+ // Abbreviated month names, starting with "C"'s Jan.
+ const _CharT* _M_amonth01;
+ const _CharT* _M_amonth02;
+ const _CharT* _M_amonth03;
+ const _CharT* _M_amonth04;
+ const _CharT* _M_amonth05;
+ const _CharT* _M_amonth06;
+ const _CharT* _M_amonth07;
+ const _CharT* _M_amonth08;
+ const _CharT* _M_amonth09;
+ const _CharT* _M_amonth10;
+ const _CharT* _M_amonth11;
+ const _CharT* _M_amonth12;
+
+ bool _M_allocated;
+
+ __timepunct_cache(size_t __refs = 0) : facet(__refs),
+ _M_date_format(NULL), _M_date_era_format(NULL), _M_time_format(NULL),
+ _M_time_era_format(NULL), _M_date_time_format(NULL),
+ _M_date_time_era_format(NULL), _M_am(NULL), _M_pm(NULL),
+ _M_am_pm_format(NULL), _M_day1(NULL), _M_day2(NULL), _M_day3(NULL),
+ _M_day4(NULL), _M_day5(NULL), _M_day6(NULL), _M_day7(NULL),
+ _M_aday1(NULL), _M_aday2(NULL), _M_aday3(NULL), _M_aday4(NULL),
+ _M_aday5(NULL), _M_aday6(NULL), _M_aday7(NULL), _M_month01(NULL),
+ _M_month02(NULL), _M_month03(NULL), _M_month04(NULL), _M_month05(NULL),
+ _M_month06(NULL), _M_month07(NULL), _M_month08(NULL), _M_month09(NULL),
+ _M_month10(NULL), _M_month11(NULL), _M_month12(NULL), _M_amonth01(NULL),
+ _M_amonth02(NULL), _M_amonth03(NULL), _M_amonth04(NULL),
+ _M_amonth05(NULL), _M_amonth06(NULL), _M_amonth07(NULL),
+ _M_amonth08(NULL), _M_amonth09(NULL), _M_amonth10(NULL),
+ _M_amonth11(NULL), _M_amonth12(NULL), _M_allocated(false)
+ { }
+
+ ~__timepunct_cache();
+
+ void
+ _M_cache(const locale& __loc);
};
- template<>
- numpunct_byname<char>::numpunct_byname(const char*, size_t __refs);
-#ifdef _GLIBCPP_USE_WCHAR_T
- template<>
- numpunct_byname<wchar_t>::numpunct_byname(const char*, size_t __refs);
-#endif
-
template<typename _CharT>
- class _Collate : public locale::facet
+ __timepunct_cache<_CharT>::~__timepunct_cache()
{
- public:
- // Types:
- typedef _CharT char_type;
- typedef basic_string<_CharT> string_type;
-
- int
- compare(const _CharT* __lo1, const _CharT* __hi1,
- const _CharT* __lo2, const _CharT* __hi2) const
- { return do_compare(__lo1, __hi1, __lo2, __hi2); }
-
- string_type
- transform(const _CharT* __lo, const _CharT* __hi) const
- { return do_transform(__lo, __hi); }
-
- long
- hash(const _CharT* __lo, const _CharT* __hi) const
- { return do_hash(__lo, __hi); }
-
- protected:
- explicit
- _Collate(size_t __refs = 0) : locale::facet(__refs) { }
-
- ~_Collate() { } // virtual
+ if (_M_allocated)
+ {
+ // Unused.
+ }
+ }
- virtual int
- do_compare(const _CharT* __lo1, const _CharT* __hi1,
- const _CharT* __lo2, const _CharT* __hi2) const = 0;
+ // Specializations.
+ template<>
+ const char*
+ __timepunct_cache<char>::_S_timezones[14];
- virtual string_type
- do_transform(const _CharT* __lo, const _CharT* __hi) const = 0;
+#ifdef _GLIBCXX_USE_WCHAR_T
+ template<>
+ const wchar_t*
+ __timepunct_cache<wchar_t>::_S_timezones[14];
+#endif
- virtual long
- do_hash(const _CharT* __lo, const _CharT* __hi) const = 0;
- };
+ // Generic.
+ template<typename _CharT>
+ const _CharT* __timepunct_cache<_CharT>::_S_timezones[14];
template<typename _CharT>
- class collate : public _Collate<_CharT>
+ class __timepunct : public locale::facet
{
- public:
+ public:
// Types:
- typedef _CharT char_type;
- typedef basic_string<_CharT> string_type;
+ typedef _CharT __char_type;
+ typedef basic_string<_CharT> __string_type;
+ typedef __timepunct_cache<_CharT> __cache_type;
- explicit
- collate(size_t __refs = 0) : _Collate<_CharT> (__refs) { }
-
- static locale::id id;
-
protected:
- virtual
- ~collate() { }
- };
+ __cache_type* _M_data;
+ __c_locale _M_c_locale_timepunct;
+ const char* _M_name_timepunct;
- template<>
- class collate<char> : public _Collate<char>
- {
- public:
- // Types:
- typedef char char_type;
- typedef basic_string<char> string_type;
+ public:
+ /// Numpunct facet id.
+ static locale::id id;
+
+ explicit
+ __timepunct(size_t __refs = 0);
+
+ explicit
+ __timepunct(__cache_type* __cache, size_t __refs = 0);
+
+ /**
+ * @brief Internal constructor. Not for general use.
+ *
+ * This is a constructor for use by the library itself to set up new
+ * locales.
+ *
+ * @param cloc The "C" locale.
+ * @param s The name of a locale.
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ __timepunct(__c_locale __cloc, const char* __s, size_t __refs = 0);
+
+ void
+ _M_put(_CharT* __s, size_t __maxlen, const _CharT* __format,
+ const tm* __tm) const;
+
+ void
+ _M_date_formats(const _CharT** __date) const
+ {
+ // Always have default first.
+ __date[0] = _M_data->_M_date_format;
+ __date[1] = _M_data->_M_date_era_format;
+ }
- explicit
- collate(size_t __refs = 0);
+ void
+ _M_time_formats(const _CharT** __time) const
+ {
+ // Always have default first.
+ __time[0] = _M_data->_M_time_format;
+ __time[1] = _M_data->_M_time_era_format;
+ }
- static locale::id id;
-
- protected:
- virtual
- ~collate();
+ void
+ _M_date_time_formats(const _CharT** __dt) const
+ {
+ // Always have default first.
+ __dt[0] = _M_data->_M_date_time_format;
+ __dt[1] = _M_data->_M_date_time_era_format;
+ }
- virtual int
- do_compare(const char* __lo1, const char* __hi1,
- const char* __lo2, const char* __hi2) const;
+ void
+ _M_am_pm_format(const _CharT* __ampm) const
+ { __ampm = _M_data->_M_am_pm_format; }
- virtual string_type
- do_transform(const char* __lo, const char* __hi) const;
+ void
+ _M_am_pm(const _CharT** __ampm) const
+ {
+ __ampm[0] = _M_data->_M_am;
+ __ampm[1] = _M_data->_M_pm;
+ }
- virtual long
- do_hash(const char* __lo, const char* __hi) const;
- };
+ void
+ _M_days(const _CharT** __days) const
+ {
+ __days[0] = _M_data->_M_day1;
+ __days[1] = _M_data->_M_day2;
+ __days[2] = _M_data->_M_day3;
+ __days[3] = _M_data->_M_day4;
+ __days[4] = _M_data->_M_day5;
+ __days[5] = _M_data->_M_day6;
+ __days[6] = _M_data->_M_day7;
+ }
-#ifdef _GLIBCPP_USE_WCHAR_T
- template<>
- class collate<wchar_t> : public _Collate<wchar_t>
- {
- public:
- // Types:
- typedef wchar_t char_type;
- typedef basic_string<wchar_t> string_type;
-
- explicit
- collate(size_t __refs = 0);
-
- static locale::id id;
-
- protected:
- virtual
- ~collate();
+ void
+ _M_days_abbreviated(const _CharT** __days) const
+ {
+ __days[0] = _M_data->_M_aday1;
+ __days[1] = _M_data->_M_aday2;
+ __days[2] = _M_data->_M_aday3;
+ __days[3] = _M_data->_M_aday4;
+ __days[4] = _M_data->_M_aday5;
+ __days[5] = _M_data->_M_aday6;
+ __days[6] = _M_data->_M_aday7;
+ }
- virtual int
- do_compare(const wchar_t* __lo1, const wchar_t* __hi1,
- const wchar_t* __lo2, const wchar_t* __hi2) const;
+ void
+ _M_months(const _CharT** __months) const
+ {
+ __months[0] = _M_data->_M_month01;
+ __months[1] = _M_data->_M_month02;
+ __months[2] = _M_data->_M_month03;
+ __months[3] = _M_data->_M_month04;
+ __months[4] = _M_data->_M_month05;
+ __months[5] = _M_data->_M_month06;
+ __months[6] = _M_data->_M_month07;
+ __months[7] = _M_data->_M_month08;
+ __months[8] = _M_data->_M_month09;
+ __months[9] = _M_data->_M_month10;
+ __months[10] = _M_data->_M_month11;
+ __months[11] = _M_data->_M_month12;
+ }
+
+ void
+ _M_months_abbreviated(const _CharT** __months) const
+ {
+ __months[0] = _M_data->_M_amonth01;
+ __months[1] = _M_data->_M_amonth02;
+ __months[2] = _M_data->_M_amonth03;
+ __months[3] = _M_data->_M_amonth04;
+ __months[4] = _M_data->_M_amonth05;
+ __months[5] = _M_data->_M_amonth06;
+ __months[6] = _M_data->_M_amonth07;
+ __months[7] = _M_data->_M_amonth08;
+ __months[8] = _M_data->_M_amonth09;
+ __months[9] = _M_data->_M_amonth10;
+ __months[10] = _M_data->_M_amonth11;
+ __months[11] = _M_data->_M_amonth12;
+ }
- virtual string_type
- do_transform(const wchar_t* __lo, const wchar_t* __hi) const;
+ protected:
+ virtual
+ ~__timepunct();
- virtual long
- do_hash(const wchar_t* __lo, const wchar_t* __hi) const;
+ // For use at construction time only.
+ void
+ _M_initialize_timepunct(__c_locale __cloc = NULL);
};
-#endif
template<typename _CharT>
- class collate_byname : public collate<_CharT>
- {
- public:
- // Types:
- typedef _CharT char_type;
- typedef basic_string<_CharT> string_type;
+ locale::id __timepunct<_CharT>::id;
- explicit
- collate_byname(const char*, size_t __refs = 0);
+ // Specializations.
+ template<>
+ void
+ __timepunct<char>::_M_initialize_timepunct(__c_locale __cloc);
- protected:
- virtual
- ~collate_byname() { }
- };
+ template<>
+ void
+ __timepunct<char>::_M_put(char*, size_t, const char*, const tm*) const;
+#ifdef _GLIBCXX_USE_WCHAR_T
template<>
- collate_byname<char>::collate_byname(const char*, size_t __refs);
-#ifdef _GLIBCPP_USE_WCHAR_T
+ void
+ __timepunct<wchar_t>::_M_initialize_timepunct(__c_locale __cloc);
+
template<>
- collate_byname<wchar_t>::collate_byname(const char*, size_t __refs);
+ void
+ __timepunct<wchar_t>::_M_put(wchar_t*, size_t, const wchar_t*,
+ const tm*) const;
#endif
- class time_base
- {
- public:
- enum dateorder { no_order, dmy, mdy, ymd, ydm };
- };
-
+ // Include host and configuration specific timepunct functions.
+ #include <bits/time_members.h>
+
+ /**
+ * @brief Facet for parsing dates and times.
+ *
+ * This facet encapsulates the code to parse and return a date or
+ * time from a string. It is used by the istream numeric
+ * extraction operators.
+ *
+ * The time_get template uses protected virtual functions to provide the
+ * actual results. The public accessors forward the call to the virtual
+ * functions. These virtual functions are hooks for developers to
+ * implement the behavior they require from the time_get facet.
+ */
template<typename _CharT, typename _InIter>
class time_get : public locale::facet, public time_base
{
public:
// Types:
- typedef _CharT char_type;
- typedef _InIter iter_type;
-
- static locale::id id;
-
- explicit
- time_get(size_t __refs = 0)
- : locale::facet (__refs), _M_daynames(0), _M_monthnames(0) { }
-
- dateorder
+ //@{
+ /// Public typedefs
+ typedef _CharT char_type;
+ typedef _InIter iter_type;
+ //@}
+ typedef basic_string<_CharT> __string_type;
+
+ /// Numpunct facet id.
+ static locale::id id;
+
+ /**
+ * @brief Constructor performs initialization.
+ *
+ * This is the constructor provided by the standard.
+ *
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ time_get(size_t __refs = 0)
+ : facet (__refs) { }
+
+ /**
+ * @brief Return preferred order of month, day, and year.
+ *
+ * This function returns an enum from timebase::dateorder giving the
+ * preferred ordering if the format "x" given to time_put::put() only
+ * uses month, day, and year. If the format "x" for the associated
+ * locale uses other fields, this function returns
+ * timebase::dateorder::noorder.
+ *
+ * NOTE: The library always returns noorder at the moment.
+ *
+ * @return A member of timebase::dateorder.
+ */
+ dateorder
date_order() const
- { return do_date_order(); }
-
- iter_type
- get_time(iter_type __s, iter_type __end, ios_base& __f,
- ios_base::iostate& __err, tm* __t) const
- { return do_get_time(__s, __end, __f, __err, __t); }
-
- iter_type
- get_date(iter_type __s, iter_type __end, ios_base& __f,
- ios_base::iostate& __err, tm* __t) const
- { return do_get_date(__s, __end, __f, __err, __t); }
-
- iter_type
- get_weekday(iter_type __s, iter_type __end, ios_base& __f,
- ios_base::iostate& __err, tm* __t) const
- { return do_get_weekday(__s,__end,__f,__err,__t); }
-
- iter_type
- get_monthname(iter_type __s, iter_type __end, ios_base& __f,
- ios_base::iostate& __err, tm* __t) const
- { return do_get_monthname(__s,__end,__f,__err,__t); }
-
- iter_type
- get_year(iter_type __s, iter_type __end, ios_base& __f,
- ios_base::iostate& __err, tm* __t) const
- { return do_get_year(__s,__end,__f,__err,__t); }
+ { return this->do_date_order(); }
+
+ /**
+ * @brief Parse input time string.
+ *
+ * This function parses a time according to the format "x" and puts the
+ * results into a user-supplied struct tm. The result is returned by
+ * calling time_get::do_get_time().
+ *
+ * If there is a valid time string according to format "x", @a tm will
+ * be filled in accordingly and the returned iterator will point to the
+ * first character beyond the time string. If an error occurs before
+ * the end, err |= ios_base::failbit. If parsing reads all the
+ * characters, err |= ios_base::eofbit.
+ *
+ * @param beg Start of string to parse.
+ * @param end End of string to parse.
+ * @param io Source of the locale.
+ * @param err Error flags to set.
+ * @param tm Pointer to struct tm to fill in.
+ * @return Iterator to first char beyond time string.
+ */
+ iter_type
+ get_time(iter_type __beg, iter_type __end, ios_base& __io,
+ ios_base::iostate& __err, tm* __tm) const
+ { return this->do_get_time(__beg, __end, __io, __err, __tm); }
+
+ /**
+ * @brief Parse input date string.
+ *
+ * This function parses a date according to the format "X" and puts the
+ * results into a user-supplied struct tm. The result is returned by
+ * calling time_get::do_get_date().
+ *
+ * If there is a valid date string according to format "X", @a tm will
+ * be filled in accordingly and the returned iterator will point to the
+ * first character beyond the date string. If an error occurs before
+ * the end, err |= ios_base::failbit. If parsing reads all the
+ * characters, err |= ios_base::eofbit.
+ *
+ * @param beg Start of string to parse.
+ * @param end End of string to parse.
+ * @param io Source of the locale.
+ * @param err Error flags to set.
+ * @param tm Pointer to struct tm to fill in.
+ * @return Iterator to first char beyond date string.
+ */
+ iter_type
+ get_date(iter_type __beg, iter_type __end, ios_base& __io,
+ ios_base::iostate& __err, tm* __tm) const
+ { return this->do_get_date(__beg, __end, __io, __err, __tm); }
+
+ /**
+ * @brief Parse input weekday string.
+ *
+ * This function parses a weekday name and puts the results into a
+ * user-supplied struct tm. The result is returned by calling
+ * time_get::do_get_weekday().
+ *
+ * Parsing starts by parsing an abbreviated weekday name. If a valid
+ * abbreviation is followed by a character that would lead to the full
+ * weekday name, parsing continues until the full name is found or an
+ * error occurs. Otherwise parsing finishes at the end of the
+ * abbreviated name.
+ *
+ * If an error occurs before the end, err |= ios_base::failbit. If
+ * parsing reads all the characters, err |= ios_base::eofbit.
+ *
+ * @param beg Start of string to parse.
+ * @param end End of string to parse.
+ * @param io Source of the locale.
+ * @param err Error flags to set.
+ * @param tm Pointer to struct tm to fill in.
+ * @return Iterator to first char beyond weekday name.
+ */
+ iter_type
+ get_weekday(iter_type __beg, iter_type __end, ios_base& __io,
+ ios_base::iostate& __err, tm* __tm) const
+ { return this->do_get_weekday(__beg, __end, __io, __err, __tm); }
+
+ /**
+ * @brief Parse input month string.
+ *
+ * This function parses a month name and puts the results into a
+ * user-supplied struct tm. The result is returned by calling
+ * time_get::do_get_monthname().
+ *
+ * Parsing starts by parsing an abbreviated month name. If a valid
+ * abbreviation is followed by a character that would lead to the full
+ * month name, parsing continues until the full name is found or an
+ * error occurs. Otherwise parsing finishes at the end of the
+ * abbreviated name.
+ *
+ * If an error occurs before the end, err |= ios_base::failbit. If
+ * parsing reads all the characters, err |=
+ * ios_base::eofbit.
+ *
+ * @param beg Start of string to parse.
+ * @param end End of string to parse.
+ * @param io Source of the locale.
+ * @param err Error flags to set.
+ * @param tm Pointer to struct tm to fill in.
+ * @return Iterator to first char beyond month name.
+ */
+ iter_type
+ get_monthname(iter_type __beg, iter_type __end, ios_base& __io,
+ ios_base::iostate& __err, tm* __tm) const
+ { return this->do_get_monthname(__beg, __end, __io, __err, __tm); }
+
+ /**
+ * @brief Parse input year string.
+ *
+ * This function reads up to 4 characters to parse a year string and
+ * puts the results into a user-supplied struct tm. The result is
+ * returned by calling time_get::do_get_year().
+ *
+ * 4 consecutive digits are interpreted as a full year. If there are
+ * exactly 2 consecutive digits, the library interprets this as the
+ * number of years since 1900.
+ *
+ * If an error occurs before the end, err |= ios_base::failbit. If
+ * parsing reads all the characters, err |= ios_base::eofbit.
+ *
+ * @param beg Start of string to parse.
+ * @param end End of string to parse.
+ * @param io Source of the locale.
+ * @param err Error flags to set.
+ * @param tm Pointer to struct tm to fill in.
+ * @return Iterator to first char beyond year.
+ */
+ iter_type
+ get_year(iter_type __beg, iter_type __end, ios_base& __io,
+ ios_base::iostate& __err, tm* __tm) const
+ { return this->do_get_year(__beg, __end, __io, __err, __tm); }
protected:
- virtual
- ~time_get()
- {
- delete [] _M_monthnames;
- delete [] _M_daynames;
- }
-
- virtual dateorder
- do_date_order() const
- { return time_base::ymd; }
-
- virtual iter_type
- do_get_time(iter_type __s, iter_type /*__end*/, ios_base&,
- ios_base::iostate& /*__err*/, tm* /*__t*/) const
- { return __s; }
-
- virtual iter_type
- do_get_date(iter_type __s, iter_type /*__end*/, ios_base&,
- ios_base::iostate& /*__err*/, tm* /*__t*/) const
- { return __s; }
-
- virtual iter_type
- do_get_weekday(iter_type __s, iter_type __end, ios_base&,
- ios_base::iostate& __err, tm* __t) const;
+ /// Destructor.
+ virtual
+ ~time_get() { }
+
+ /**
+ * @brief Return preferred order of month, day, and year.
+ *
+ * This function returns an enum from timebase::dateorder giving the
+ * preferred ordering if the format "x" given to time_put::put() only
+ * uses month, day, and year. This function is a hook for derived
+ * classes to change the value returned.
+ *
+ * @return A member of timebase::dateorder.
+ */
+ virtual dateorder
+ do_date_order() const;
+
+ /**
+ * @brief Parse input time string.
+ *
+ * This function parses a time according to the format "x" and puts the
+ * results into a user-supplied struct tm. This function is a hook for
+ * derived classes to change the value returned. @see get_time() for
+ * details.
+ *
+ * @param beg Start of string to parse.
+ * @param end End of string to parse.
+ * @param io Source of the locale.
+ * @param err Error flags to set.
+ * @param tm Pointer to struct tm to fill in.
+ * @return Iterator to first char beyond time string.
+ */
+ virtual iter_type
+ do_get_time(iter_type __beg, iter_type __end, ios_base& __io,
+ ios_base::iostate& __err, tm* __tm) const;
+
+ /**
+ * @brief Parse input date string.
+ *
+ * This function parses a date according to the format "X" and puts the
+ * results into a user-supplied struct tm. This function is a hook for
+ * derived classes to change the value returned. @see get_date() for
+ * details.
+ *
+ * @param beg Start of string to parse.
+ * @param end End of string to parse.
+ * @param io Source of the locale.
+ * @param err Error flags to set.
+ * @param tm Pointer to struct tm to fill in.
+ * @return Iterator to first char beyond date string.
+ */
+ virtual iter_type
+ do_get_date(iter_type __beg, iter_type __end, ios_base& __io,
+ ios_base::iostate& __err, tm* __tm) const;
+
+ /**
+ * @brief Parse input weekday string.
+ *
+ * This function parses a weekday name and puts the results into a
+ * user-supplied struct tm. This function is a hook for derived
+ * classes to change the value returned. @see get_weekday() for
+ * details.
+ *
+ * @param beg Start of string to parse.
+ * @param end End of string to parse.
+ * @param io Source of the locale.
+ * @param err Error flags to set.
+ * @param tm Pointer to struct tm to fill in.
+ * @return Iterator to first char beyond weekday name.
+ */
+ virtual iter_type
+ do_get_weekday(iter_type __beg, iter_type __end, ios_base&,
+ ios_base::iostate& __err, tm* __tm) const;
+
+ /**
+ * @brief Parse input month string.
+ *
+ * This function parses a month name and puts the results into a
+ * user-supplied struct tm. This function is a hook for derived
+ * classes to change the value returned. @see get_monthname() for
+ * details.
+ *
+ * @param beg Start of string to parse.
+ * @param end End of string to parse.
+ * @param io Source of the locale.
+ * @param err Error flags to set.
+ * @param tm Pointer to struct tm to fill in.
+ * @return Iterator to first char beyond month name.
+ */
+ virtual iter_type
+ do_get_monthname(iter_type __beg, iter_type __end, ios_base&,
+ ios_base::iostate& __err, tm* __tm) const;
+
+ /**
+ * @brief Parse input year string.
+ *
+ * This function reads up to 4 characters to parse a year string and
+ * puts the results into a user-supplied struct tm. This function is a
+ * hook for derived classes to change the value returned. @see
+ * get_year() for details.
+ *
+ * @param beg Start of string to parse.
+ * @param end End of string to parse.
+ * @param io Source of the locale.
+ * @param err Error flags to set.
+ * @param tm Pointer to struct tm to fill in.
+ * @return Iterator to first char beyond year.
+ */
+ virtual iter_type
+ do_get_year(iter_type __beg, iter_type __end, ios_base& __io,
+ ios_base::iostate& __err, tm* __tm) const;
- virtual iter_type
- do_get_monthname(iter_type __s, iter_type __end, ios_base&,
- ios_base::iostate& __err, tm* __t) const;
+ // Extract numeric component of length __len.
+ iter_type
+ _M_extract_num(iter_type __beg, iter_type __end, int& __member,
+ int __min, int __max, size_t __len,
+ ios_base& __io, ios_base::iostate& __err) const;
- virtual iter_type
- do_get_year(iter_type __s, iter_type /*__end*/, ios_base&,
- ios_base::iostate& /*__err*/, tm* /*__t*/) const
- { return __s; }
+ // Extract day or month name, or any unique array of string
+ // literals in a const _CharT* array.
+ iter_type
+ _M_extract_name(iter_type __beg, iter_type __end, int& __member,
+ const _CharT** __names, size_t __indexlen,
+ ios_base& __io, ios_base::iostate& __err) const;
- mutable basic_string<_CharT>* _M_daynames;
- mutable basic_string<_CharT>* _M_monthnames;
+ // Extract on a component-by-component basis, via __format argument.
+ iter_type
+ _M_extract_via_format(iter_type __beg, iter_type __end, ios_base& __io,
+ ios_base::iostate& __err, tm* __tm,
+ const _CharT* __format) const;
};
template<typename _CharT, typename _InIter>
+ locale::id time_get<_CharT, _InIter>::id;
+
+ template<typename _CharT, typename _InIter>
class time_get_byname : public time_get<_CharT, _InIter>
{
public:
- typedef _CharT char_type;
- typedef _InIter iter_type;
+ // Types:
+ typedef _CharT char_type;
+ typedef _InIter iter_type;
- explicit
- time_get_byname(const char*, size_t __refs = 0)
+ explicit
+ time_get_byname(const char*, size_t __refs = 0)
: time_get<_CharT, _InIter>(__refs) { }
+
protected:
- virtual
+ virtual
~time_get_byname() { }
};
+ /**
+ * @brief Facet for outputting dates and times.
+ *
+ * This facet encapsulates the code to format and output dates and times
+ * according to formats used by strftime().
+ *
+ * The time_put template uses protected virtual functions to provide the
+ * actual results. The public accessors forward the call to the virtual
+ * functions. These virtual functions are hooks for developers to
+ * implement the behavior they require from the time_put facet.
+ */
template<typename _CharT, typename _OutIter>
- class time_put : public locale::facet, public time_base
+ class time_put : public locale::facet
{
public:
- typedef _CharT char_type;
- typedef _OutIter iter_type;
-
- static locale::id id;
-
- explicit
- time_put(size_t __refs = 0) : locale::facet (__refs) { }
-
- // NB: this is a nonvirtual, calls do_put in a loop.
- iter_type
- put(iter_type __s, ios_base& /*__f*/, char_type /*__fill*/,
- const tm* /*__tmb*/, const _CharT* /*__pattern*/,
- const _CharT* /*__pat_end*/) const
- { return __s; }
-
- iter_type
- put(iter_type __s, ios_base& __f, char_type __fill,
- const tm* __tmb, char __format, char __modifier = 0) const
- { return do_put(__s, __f, __fill, __tmb, __format, __modifier); }
+ // Types:
+ //@{
+ /// Public typedefs
+ typedef _CharT char_type;
+ typedef _OutIter iter_type;
+ //@}
+
+ /// Numpunct facet id.
+ static locale::id id;
+
+ /**
+ * @brief Constructor performs initialization.
+ *
+ * This is the constructor provided by the standard.
+ *
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ time_put(size_t __refs = 0)
+ : facet(__refs) { }
+
+ /**
+ * @brief Format and output a time or date.
+ *
+ * This function formats the data in struct tm according to the
+ * provided format string. The format string is interpreted as by
+ * strftime().
+ *
+ * @param s The stream to write to.
+ * @param io Source of locale.
+ * @param fill char_type to use for padding.
+ * @param tm Struct tm with date and time info to format.
+ * @param beg Start of format string.
+ * @param end End of format string.
+ * @return Iterator after writing.
+ */
+ iter_type
+ put(iter_type __s, ios_base& __io, char_type __fill, const tm* __tm,
+ const _CharT* __beg, const _CharT* __end) const;
+
+ /**
+ * @brief Format and output a time or date.
+ *
+ * This function formats the data in struct tm according to the
+ * provided format char and optional modifier. The format and modifier
+ * are interpreted as by strftime(). It does so by returning
+ * time_put::do_put().
+ *
+ * @param s The stream to write to.
+ * @param io Source of locale.
+ * @param fill char_type to use for padding.
+ * @param tm Struct tm with date and time info to format.
+ * @param format Format char.
+ * @param mod Optional modifier char.
+ * @return Iterator after writing.
+ */
+ iter_type
+ put(iter_type __s, ios_base& __io, char_type __fill,
+ const tm* __tm, char __format, char __mod = 0) const
+ { return this->do_put(__s, __io, __fill, __tm, __format, __mod); }
protected:
- virtual
- ~time_put() { }
-
- virtual iter_type
- do_put(iter_type __s, ios_base&, char_type, const tm* /*__t*/,
- char /*__format*/, char /*__mod*/) const
- { return __s; }
+ /// Destructor.
+ virtual
+ ~time_put()
+ { }
+
+ /**
+ * @brief Format and output a time or date.
+ *
+ * This function formats the data in struct tm according to the
+ * provided format char and optional modifier. This function is a hook
+ * for derived classes to change the value returned. @see put() for
+ * more details.
+ *
+ * @param s The stream to write to.
+ * @param io Source of locale.
+ * @param fill char_type to use for padding.
+ * @param tm Struct tm with date and time info to format.
+ * @param format Format char.
+ * @param mod Optional modifier char.
+ * @return Iterator after writing.
+ */
+ virtual iter_type
+ do_put(iter_type __s, ios_base& __io, char_type __fill, const tm* __tm,
+ char __format, char __mod) const;
};
template<typename _CharT, typename _OutIter>
+ locale::id time_put<_CharT, _OutIter>::id;
+
+ template<typename _CharT, typename _OutIter>
class time_put_byname : public time_put<_CharT, _OutIter>
{
public:
- typedef _CharT char_type;
- typedef _OutIter iter_type;
+ // Types:
+ typedef _CharT char_type;
+ typedef _OutIter iter_type;
- explicit
- time_put_byname(const char*, size_t __refs = 0)
- : time_put<_CharT, _OutIter> (__refs) { }
+ explicit
+ time_put_byname(const char*, size_t __refs = 0)
+ : time_put<_CharT, _OutIter>(__refs)
+ { };
protected:
- virtual
+ virtual
~time_put_byname() { }
};
- template<typename _CharT, typename _InIter>
- class money_get : public locale::facet
- {
- public:
- typedef _CharT char_type;
- typedef _InIter iter_type;
- typedef basic_string<_CharT> string_type;
-
- static locale::id id;
+ /**
+ * @brief Money format ordering data.
+ *
+ * This class contains an ordered array of 4 fields to represent the
+ * pattern for formatting a money amount. Each field may contain one entry
+ * from the part enum. symbol, sign, and value must be present and the
+ * remaining field must contain either none or space. @see
+ * moneypunct::pos_format() and moneypunct::neg_format() for details of how
+ * these fields are interpreted.
+ */
+ class money_base
+ {
+ public:
+ enum part { none, space, symbol, sign, value };
+ struct pattern { char field[4]; };
- explicit
- money_get(size_t __refs = 0) : locale::facet(__refs) { }
+ static const pattern _S_default_pattern;
- iter_type
- get(iter_type __s, iter_type __end, bool __intl,
- ios_base& __f, ios_base::iostate& __err, long double& __units) const
- { return do_get(__s, __end, __intl, __f, __err, __units); }
+ enum
+ {
+ _S_minus,
+ _S_zero,
+ _S_end = 11
+ };
- iter_type
- get(iter_type __s, iter_type __end, bool __intl, ios_base& __f,
- ios_base::iostate& __err, string_type& __digits) const
- { return do_get(__s, __end, __intl, __f, __err, __digits); }
+ // String literal of acceptable (narrow) input/output, for
+ // money_get/money_put. "-0123456789"
+ static const char* _S_atoms;
- protected:
- virtual
- ~money_get() { }
+ // Construct and return valid pattern consisting of some combination of:
+ // space none symbol sign value
+ static pattern
+ _S_construct_pattern(char __precedes, char __space, char __posn);
+ };
- virtual iter_type
- do_get(iter_type __s, iter_type /*__end*/, bool /*__intl*/,
- ios_base& /*__io*/, ios_base::iostate& /*__err*/,
- long double& /*__units*/) const
- { return __s; }
-
- virtual iter_type
- do_get(iter_type __s, iter_type /*__end*/, bool /*__intl*/,
- ios_base& /*__io*/, ios_base::iostate& /*__err*/,
- string_type& /*__digits*/) const
- { return __s; }
+ template<typename _CharT, bool _Intl>
+ struct __moneypunct_cache : public locale::facet
+ {
+ const char* _M_grouping;
+ size_t _M_grouping_size;
+ bool _M_use_grouping;
+ _CharT _M_decimal_point;
+ _CharT _M_thousands_sep;
+ const _CharT* _M_curr_symbol;
+ size_t _M_curr_symbol_size;
+ const _CharT* _M_positive_sign;
+ size_t _M_positive_sign_size;
+ const _CharT* _M_negative_sign;
+ size_t _M_negative_sign_size;
+ int _M_frac_digits;
+ money_base::pattern _M_pos_format;
+ money_base::pattern _M_neg_format;
+
+ // A list of valid numeric literals for input and output: in the standard
+ // "C" locale, this is "-0123456789". This array contains the chars after
+ // having been passed through the current locale's ctype<_CharT>.widen().
+ _CharT _M_atoms[money_base::_S_end];
+
+ bool _M_allocated;
+
+ __moneypunct_cache(size_t __refs = 0) : facet(__refs),
+ _M_grouping(NULL), _M_grouping_size(0), _M_use_grouping(false),
+ _M_decimal_point(_CharT()), _M_thousands_sep(_CharT()),
+ _M_curr_symbol(NULL), _M_curr_symbol_size(0),
+ _M_positive_sign(NULL), _M_positive_sign_size(0),
+ _M_negative_sign(NULL), _M_negative_sign_size(0),
+ _M_frac_digits(0),
+ _M_pos_format(money_base::pattern()),
+ _M_neg_format(money_base::pattern()), _M_allocated(false)
+ { }
+
+ ~__moneypunct_cache();
+
+ void
+ _M_cache(const locale& __loc);
};
- template<typename _CharT, typename _OutIter>
- class money_put : public locale::facet
+ template<typename _CharT, bool _Intl>
+ __moneypunct_cache<_CharT, _Intl>::~__moneypunct_cache()
{
- public:
- typedef _CharT char_type;
- typedef _OutIter iter_type;
- typedef basic_string<_CharT> string_type;
-
- static locale::id id;
+ if (_M_allocated)
+ {
+ delete [] _M_grouping;
+ delete [] _M_curr_symbol;
+ delete [] _M_positive_sign;
+ delete [] _M_negative_sign;
+ }
+ }
- explicit
- money_put(size_t __refs = 0) : locale::facet(__refs) { }
+ /**
+ * @brief Facet for formatting data for money amounts.
+ *
+ * This facet encapsulates the punctuation, grouping and other formatting
+ * features of money amount string representations.
+ */
+ template<typename _CharT, bool _Intl>
+ class moneypunct : public locale::facet, public money_base
+ {
+ public:
+ // Types:
+ //@{
+ /// Public typedefs
+ typedef _CharT char_type;
+ typedef basic_string<_CharT> string_type;
+ //@}
+ typedef __moneypunct_cache<_CharT, _Intl> __cache_type;
- iter_type
- put(iter_type __s, bool __intl, ios_base& __f,
- char_type __fill, long double __units) const
- { return do_put(__s, __intl, __f, __fill, __units); }
+ private:
+ __cache_type* _M_data;
- iter_type
- put(iter_type __s, bool __intl, ios_base& __f,
- char_type __fill, const string_type& __digits) const
- { return do_put(__s, __intl, __f, __fill, __digits); }
+ public:
+ /// This value is provided by the standard, but no reason for its
+ /// existence.
+ static const bool intl = _Intl;
+ /// Numpunct facet id.
+ static locale::id id;
+
+ /**
+ * @brief Constructor performs initialization.
+ *
+ * This is the constructor provided by the standard.
+ *
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ moneypunct(size_t __refs = 0) : facet(__refs), _M_data(NULL)
+ { _M_initialize_moneypunct(); }
+
+ /**
+ * @brief Constructor performs initialization.
+ *
+ * This is an internal constructor.
+ *
+ * @param cache Cache for optimization.
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ moneypunct(__cache_type* __cache, size_t __refs = 0)
+ : facet(__refs), _M_data(__cache)
+ { _M_initialize_moneypunct(); }
+
+ /**
+ * @brief Internal constructor. Not for general use.
+ *
+ * This is a constructor for use by the library itself to set up new
+ * locales.
+ *
+ * @param cloc The "C" locale.
+ * @param s The name of a locale.
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ moneypunct(__c_locale __cloc, const char* __s, size_t __refs = 0)
+ : facet(__refs), _M_data(NULL)
+ { _M_initialize_moneypunct(__cloc, __s); }
+
+ /**
+ * @brief Return decimal point character.
+ *
+ * This function returns a char_type to use as a decimal point. It
+ * does so by returning returning
+ * moneypunct<char_type>::do_decimal_point().
+ *
+ * @return @a char_type representing a decimal point.
+ */
+ char_type
+ decimal_point() const
+ { return this->do_decimal_point(); }
+
+ /**
+ * @brief Return thousands separator character.
+ *
+ * This function returns a char_type to use as a thousands
+ * separator. It does so by returning returning
+ * moneypunct<char_type>::do_thousands_sep().
+ *
+ * @return char_type representing a thousands separator.
+ */
+ char_type
+ thousands_sep() const
+ { return this->do_thousands_sep(); }
+
+ /**
+ * @brief Return grouping specification.
+ *
+ * This function returns a string representing groupings for the
+ * integer part of an amount. Groupings indicate where thousands
+ * separators should be inserted.
+ *
+ * Each char in the return string is interpret as an integer rather
+ * than a character. These numbers represent the number of digits in a
+ * group. The first char in the string represents the number of digits
+ * in the least significant group. If a char is negative, it indicates
+ * an unlimited number of digits for the group. If more chars from the
+ * string are required to group a number, the last char is used
+ * repeatedly.
+ *
+ * For example, if the grouping() returns "\003\002" and is applied to
+ * the number 123456789, this corresponds to 12,34,56,789. Note that
+ * if the string was "32", this would put more than 50 digits into the
+ * least significant group if the character set is ASCII.
+ *
+ * The string is returned by calling
+ * moneypunct<char_type>::do_grouping().
+ *
+ * @return string representing grouping specification.
+ */
+ string
+ grouping() const
+ { return this->do_grouping(); }
+
+ /**
+ * @brief Return currency symbol string.
+ *
+ * This function returns a string_type to use as a currency symbol. It
+ * does so by returning returning
+ * moneypunct<char_type>::do_curr_symbol().
+ *
+ * @return @a string_type representing a currency symbol.
+ */
+ string_type
+ curr_symbol() const
+ { return this->do_curr_symbol(); }
+
+ /**
+ * @brief Return positive sign string.
+ *
+ * This function returns a string_type to use as a sign for positive
+ * amounts. It does so by returning returning
+ * moneypunct<char_type>::do_positive_sign().
+ *
+ * If the return value contains more than one character, the first
+ * character appears in the position indicated by pos_format() and the
+ * remainder appear at the end of the formatted string.
+ *
+ * @return @a string_type representing a positive sign.
+ */
+ string_type
+ positive_sign() const
+ { return this->do_positive_sign(); }
+
+ /**
+ * @brief Return negative sign string.
+ *
+ * This function returns a string_type to use as a sign for negative
+ * amounts. It does so by returning returning
+ * moneypunct<char_type>::do_negative_sign().
+ *
+ * If the return value contains more than one character, the first
+ * character appears in the position indicated by neg_format() and the
+ * remainder appear at the end of the formatted string.
+ *
+ * @return @a string_type representing a negative sign.
+ */
+ string_type
+ negative_sign() const
+ { return this->do_negative_sign(); }
+
+ /**
+ * @brief Return number of digits in fraction.
+ *
+ * This function returns the exact number of digits that make up the
+ * fractional part of a money amount. It does so by returning
+ * returning moneypunct<char_type>::do_frac_digits().
+ *
+ * The fractional part of a money amount is optional. But if it is
+ * present, there must be frac_digits() digits.
+ *
+ * @return Number of digits in amount fraction.
+ */
+ int
+ frac_digits() const
+ { return this->do_frac_digits(); }
+
+ //@{
+ /**
+ * @brief Return pattern for money values.
+ *
+ * This function returns a pattern describing the formatting of a
+ * positive or negative valued money amount. It does so by returning
+ * returning moneypunct<char_type>::do_pos_format() or
+ * moneypunct<char_type>::do_neg_format().
+ *
+ * The pattern has 4 fields describing the ordering of symbol, sign,
+ * value, and none or space. There must be one of each in the pattern.
+ * The none and space enums may not appear in the first field and space
+ * may not appear in the final field.
+ *
+ * The parts of a money string must appear in the order indicated by
+ * the fields of the pattern. The symbol field indicates that the
+ * value of curr_symbol() may be present. The sign field indicates
+ * that the value of positive_sign() or negative_sign() must be
+ * present. The value field indicates that the absolute value of the
+ * money amount is present. none indicates 0 or more whitespace
+ * characters, except at the end, where it permits no whitespace.
+ * space indicates that 1 or more whitespace characters must be
+ * present.
+ *
+ * For example, for the US locale and pos_format() pattern
+ * {symbol,sign,value,none}, curr_symbol() == '$' positive_sign() ==
+ * '+', and value 10.01, and options set to force the symbol, the
+ * corresponding string is "$+10.01".
+ *
+ * @return Pattern for money values.
+ */
+ pattern
+ pos_format() const
+ { return this->do_pos_format(); }
+
+ pattern
+ neg_format() const
+ { return this->do_neg_format(); }
+ //@}
protected:
- virtual
- ~money_put() { }
-
- virtual iter_type
- do_put(iter_type __s, bool, ios_base& /*__io*/, char_type /*__fill*/,
- long double /*__units*/) const
- { return __s; }
+ /// Destructor.
+ virtual
+ ~moneypunct();
+
+ /**
+ * @brief Return decimal point character.
+ *
+ * Returns a char_type to use as a decimal point. This function is a
+ * hook for derived classes to change the value returned.
+ *
+ * @return @a char_type representing a decimal point.
+ */
+ virtual char_type
+ do_decimal_point() const
+ { return _M_data->_M_decimal_point; }
+
+ /**
+ * @brief Return thousands separator character.
+ *
+ * Returns a char_type to use as a thousands separator. This function
+ * is a hook for derived classes to change the value returned.
+ *
+ * @return @a char_type representing a thousands separator.
+ */
+ virtual char_type
+ do_thousands_sep() const
+ { return _M_data->_M_thousands_sep; }
+
+ /**
+ * @brief Return grouping specification.
+ *
+ * Returns a string representing groupings for the integer part of a
+ * number. This function is a hook for derived classes to change the
+ * value returned. @see grouping() for details.
+ *
+ * @return String representing grouping specification.
+ */
+ virtual string
+ do_grouping() const
+ { return _M_data->_M_grouping; }
+
+ /**
+ * @brief Return currency symbol string.
+ *
+ * This function returns a string_type to use as a currency symbol.
+ * This function is a hook for derived classes to change the value
+ * returned. @see curr_symbol() for details.
+ *
+ * @return @a string_type representing a currency symbol.
+ */
+ virtual string_type
+ do_curr_symbol() const
+ { return _M_data->_M_curr_symbol; }
+
+ /**
+ * @brief Return positive sign string.
+ *
+ * This function returns a string_type to use as a sign for positive
+ * amounts. This function is a hook for derived classes to change the
+ * value returned. @see positive_sign() for details.
+ *
+ * @return @a string_type representing a positive sign.
+ */
+ virtual string_type
+ do_positive_sign() const
+ { return _M_data->_M_positive_sign; }
+
+ /**
+ * @brief Return negative sign string.
+ *
+ * This function returns a string_type to use as a sign for negative
+ * amounts. This function is a hook for derived classes to change the
+ * value returned. @see negative_sign() for details.
+ *
+ * @return @a string_type representing a negative sign.
+ */
+ virtual string_type
+ do_negative_sign() const
+ { return _M_data->_M_negative_sign; }
+
+ /**
+ * @brief Return number of digits in fraction.
+ *
+ * This function returns the exact number of digits that make up the
+ * fractional part of a money amount. This function is a hook for
+ * derived classes to change the value returned. @see frac_digits()
+ * for details.
+ *
+ * @return Number of digits in amount fraction.
+ */
+ virtual int
+ do_frac_digits() const
+ { return _M_data->_M_frac_digits; }
+
+ /**
+ * @brief Return pattern for money values.
+ *
+ * This function returns a pattern describing the formatting of a
+ * positive valued money amount. This function is a hook for derived
+ * classes to change the value returned. @see pos_format() for
+ * details.
+ *
+ * @return Pattern for money values.
+ */
+ virtual pattern
+ do_pos_format() const
+ { return _M_data->_M_pos_format; }
+
+ /**
+ * @brief Return pattern for money values.
+ *
+ * This function returns a pattern describing the formatting of a
+ * negative valued money amount. This function is a hook for derived
+ * classes to change the value returned. @see neg_format() for
+ * details.
+ *
+ * @return Pattern for money values.
+ */
+ virtual pattern
+ do_neg_format() const
+ { return _M_data->_M_neg_format; }
- virtual iter_type
- do_put(iter_type __s, bool, ios_base& /*__io*/, char_type /*__fill*/,
- const string_type& /*__digits*/) const
- { return __s; }
+ // For use at construction time only.
+ void
+ _M_initialize_moneypunct(__c_locale __cloc = NULL,
+ const char* __name = NULL);
};
- struct money_base
- {
- enum part { none, space, symbol, sign, value };
- struct pattern { char field[4]; };
-
- static const pattern _S_default_pattern;
- };
-
- template<typename _CharT>
- class _Moneypunct : public _Punct<_CharT>, public money_base
- {
- public:
- typedef _CharT char_type;
- typedef basic_string<_CharT> string_type;
-
- string_type
- curr_symbol() const
- { return do_curr_symbol(); }
+ template<typename _CharT, bool _Intl>
+ locale::id moneypunct<_CharT, _Intl>::id;
- string_type
- positive_sign() const
- { return do_positive_sign(); }
+ template<typename _CharT, bool _Intl>
+ const bool moneypunct<_CharT, _Intl>::intl;
- string_type
- negative_sign() const
- { return do_negative_sign(); }
+ template<>
+ moneypunct<char, true>::~moneypunct();
- int
- frac_digits() const
- { return do_frac_digits(); }
+ template<>
+ moneypunct<char, false>::~moneypunct();
- pattern
- pos_format() const
- { return do_pos_format(); }
+ template<>
+ void
+ moneypunct<char, true>::_M_initialize_moneypunct(__c_locale, const char*);
- pattern
- neg_format() const
- { return do_neg_format(); }
+ template<>
+ void
+ moneypunct<char, false>::_M_initialize_moneypunct(__c_locale, const char*);
- protected:
- explicit
- _Moneypunct(size_t __refs = 0) : _Punct<_CharT> (__refs) { }
+#ifdef _GLIBCXX_USE_WCHAR_T
+ template<>
+ moneypunct<wchar_t, true>::~moneypunct();
- virtual
- ~_Moneypunct() { }
+ template<>
+ moneypunct<wchar_t, false>::~moneypunct();
- virtual string_type
- do_curr_symbol() const
- { return basic_string<_CharT>(); }
+ template<>
+ void
+ moneypunct<wchar_t, true>::_M_initialize_moneypunct(__c_locale,
+ const char*);
- virtual string_type
- do_positive_sign() const
- { return basic_string<_CharT>(); }
+ template<>
+ void
+ moneypunct<wchar_t, false>::_M_initialize_moneypunct(__c_locale,
+ const char*);
+#endif
- virtual string_type
- do_negative_sign() const
- { return basic_string<_CharT>(); }
+ template<typename _CharT, bool _Intl>
+ class moneypunct_byname : public moneypunct<_CharT, _Intl>
+ {
+ public:
+ typedef _CharT char_type;
+ typedef basic_string<_CharT> string_type;
- virtual int
- do_frac_digits() const
- { return 0; }
+ static const bool intl = _Intl;
- virtual pattern
- do_pos_format() const
- { return money_base::_S_default_pattern; }
+ explicit
+ moneypunct_byname(const char* __s, size_t __refs = 0)
+ : moneypunct<_CharT, _Intl>(__refs)
+ {
+ if (std::strcmp(__s, "C") != 0 && std::strcmp(__s, "POSIX") != 0)
+ {
+ __c_locale __tmp;
+ this->_S_create_c_locale(__tmp, __s);
+ this->_M_initialize_moneypunct(__tmp);
+ this->_S_destroy_c_locale(__tmp);
+ }
+ }
- virtual pattern
- do_neg_format() const
- { return money_base::_S_default_pattern; }
+ protected:
+ virtual
+ ~moneypunct_byname() { }
};
template<typename _CharT, bool _Intl>
- class moneypunct : public _Moneypunct<_CharT>
+ const bool moneypunct_byname<_CharT, _Intl>::intl;
+
+ /**
+ * @brief Facet for parsing monetary amounts.
+ *
+ * This facet encapsulates the code to parse and return a monetary
+ * amount from a string.
+ *
+ * The money_get template uses protected virtual functions to
+ * provide the actual results. The public accessors forward the
+ * call to the virtual functions. These virtual functions are
+ * hooks for developers to implement the behavior they require from
+ * the money_get facet.
+ */
+ template<typename _CharT, typename _InIter>
+ class money_get : public locale::facet
{
public:
// Types:
- typedef _CharT char_type;
- typedef basic_string<_CharT> string_type;
+ //@{
+ /// Public typedefs
+ typedef _CharT char_type;
+ typedef _InIter iter_type;
+ typedef basic_string<_CharT> string_type;
+ //@}
+
+ /// Numpunct facet id.
+ static locale::id id;
+
+ /**
+ * @brief Constructor performs initialization.
+ *
+ * This is the constructor provided by the standard.
+ *
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ money_get(size_t __refs = 0) : facet(__refs) { }
+
+ /**
+ * @brief Read and parse a monetary value.
+ *
+ * This function reads characters from @a s, interprets them as a
+ * monetary value according to moneypunct and ctype facets retrieved
+ * from io.getloc(), and returns the result in @a units as an integral
+ * value moneypunct::frac_digits() * the actual amount. For example,
+ * the string $10.01 in a US locale would store 1001 in @a units.
+ *
+ * Any characters not part of a valid money amount are not consumed.
+ *
+ * If a money value cannot be parsed from the input stream, sets
+ * err=(err|io.failbit). If the stream is consumed before finishing
+ * parsing, sets err=(err|io.failbit|io.eofbit). @a units is
+ * unchanged if parsing fails.
+ *
+ * This function works by returning the result of do_get().
+ *
+ * @param s Start of characters to parse.
+ * @param end End of characters to parse.
+ * @param intl Parameter to use_facet<moneypunct<CharT,intl> >.
+ * @param io Source of facets and io state.
+ * @param err Error field to set if parsing fails.
+ * @param units Place to store result of parsing.
+ * @return Iterator referencing first character beyond valid money
+ * amount.
+ */
+ iter_type
+ get(iter_type __s, iter_type __end, bool __intl, ios_base& __io,
+ ios_base::iostate& __err, long double& __units) const
+ { return this->do_get(__s, __end, __intl, __io, __err, __units); }
+
+ /**
+ * @brief Read and parse a monetary value.
+ *
+ * This function reads characters from @a s, interprets them as a
+ * monetary value according to moneypunct and ctype facets retrieved
+ * from io.getloc(), and returns the result in @a digits. For example,
+ * the string $10.01 in a US locale would store "1001" in @a digits.
+ *
+ * Any characters not part of a valid money amount are not consumed.
+ *
+ * If a money value cannot be parsed from the input stream, sets
+ * err=(err|io.failbit). If the stream is consumed before finishing
+ * parsing, sets err=(err|io.failbit|io.eofbit).
+ *
+ * This function works by returning the result of do_get().
+ *
+ * @param s Start of characters to parse.
+ * @param end End of characters to parse.
+ * @param intl Parameter to use_facet<moneypunct<CharT,intl> >.
+ * @param io Source of facets and io state.
+ * @param err Error field to set if parsing fails.
+ * @param digits Place to store result of parsing.
+ * @return Iterator referencing first character beyond valid money
+ * amount.
+ */
+ iter_type
+ get(iter_type __s, iter_type __end, bool __intl, ios_base& __io,
+ ios_base::iostate& __err, string_type& __digits) const
+ { return this->do_get(__s, __end, __intl, __io, __err, __digits); }
- static const bool intl = _Intl;
- static locale::id id;
+ protected:
+ /// Destructor.
+ virtual
+ ~money_get() { }
- explicit
- moneypunct(size_t __refs = 0) : _Moneypunct<_CharT> (__refs) { }
+ /**
+ * @brief Read and parse a monetary value.
+ *
+ * This function reads and parses characters representing a monetary
+ * value. This function is a hook for derived classes to change the
+ * value returned. @see get() for details.
+ */
+ virtual iter_type
+ do_get(iter_type __s, iter_type __end, bool __intl, ios_base& __io,
+ ios_base::iostate& __err, long double& __units) const;
+
+ /**
+ * @brief Read and parse a monetary value.
+ *
+ * This function reads and parses characters representing a monetary
+ * value. This function is a hook for derived classes to change the
+ * value returned. @see get() for details.
+ */
+ virtual iter_type
+ do_get(iter_type __s, iter_type __end, bool __intl, ios_base& __io,
+ ios_base::iostate& __err, string_type& __digits) const;
- protected:
- virtual
- ~moneypunct() { }
+ template<bool _Intl>
+ iter_type
+ _M_extract(iter_type __s, iter_type __end, ios_base& __io,
+ ios_base::iostate& __err, string& __digits) const;
};
- template<typename _CharT, bool _Intl>
- class moneypunct_byname : public moneypunct<_CharT,_Intl>
+ template<typename _CharT, typename _InIter>
+ locale::id money_get<_CharT, _InIter>::id;
+
+ /**
+ * @brief Facet for outputting monetary amounts.
+ *
+ * This facet encapsulates the code to format and output a monetary
+ * amount.
+ *
+ * The money_put template uses protected virtual functions to
+ * provide the actual results. The public accessors forward the
+ * call to the virtual functions. These virtual functions are
+ * hooks for developers to implement the behavior they require from
+ * the money_put facet.
+ */
+ template<typename _CharT, typename _OutIter>
+ class money_put : public locale::facet
{
public:
- typedef _CharT char_type;
- typedef basic_string<_CharT> string_type;
- static const bool intl = _Intl;
-
- explicit
- moneypunct_byname(const char*, size_t __refs = 0);
+ //@{
+ /// Public typedefs
+ typedef _CharT char_type;
+ typedef _OutIter iter_type;
+ typedef basic_string<_CharT> string_type;
+ //@}
+
+ /// Numpunct facet id.
+ static locale::id id;
+
+ /**
+ * @brief Constructor performs initialization.
+ *
+ * This is the constructor provided by the standard.
+ *
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ money_put(size_t __refs = 0) : facet(__refs) { }
+
+ /**
+ * @brief Format and output a monetary value.
+ *
+ * This function formats @a units as a monetary value according to
+ * moneypunct and ctype facets retrieved from io.getloc(), and writes
+ * the resulting characters to @a s. For example, the value 1001 in a
+ * US locale would write "$10.01" to @a s.
+ *
+ * This function works by returning the result of do_put().
+ *
+ * @param s The stream to write to.
+ * @param intl Parameter to use_facet<moneypunct<CharT,intl> >.
+ * @param io Source of facets and io state.
+ * @param fill char_type to use for padding.
+ * @param units Place to store result of parsing.
+ * @return Iterator after writing.
+ */
+ iter_type
+ put(iter_type __s, bool __intl, ios_base& __io,
+ char_type __fill, long double __units) const
+ { return this->do_put(__s, __intl, __io, __fill, __units); }
+
+ /**
+ * @brief Format and output a monetary value.
+ *
+ * This function formats @a digits as a monetary value according to
+ * moneypunct and ctype facets retrieved from io.getloc(), and writes
+ * the resulting characters to @a s. For example, the string "1001" in
+ * a US locale would write "$10.01" to @a s.
+ *
+ * This function works by returning the result of do_put().
+ *
+ * @param s The stream to write to.
+ * @param intl Parameter to use_facet<moneypunct<CharT,intl> >.
+ * @param io Source of facets and io state.
+ * @param fill char_type to use for padding.
+ * @param units Place to store result of parsing.
+ * @return Iterator after writing.
+ */
+ iter_type
+ put(iter_type __s, bool __intl, ios_base& __io,
+ char_type __fill, const string_type& __digits) const
+ { return this->do_put(__s, __intl, __io, __fill, __digits); }
protected:
- virtual
- ~moneypunct_byname() { }
+ /// Destructor.
+ virtual
+ ~money_put() { }
+
+ /**
+ * @brief Format and output a monetary value.
+ *
+ * This function formats @a units as a monetary value according to
+ * moneypunct and ctype facets retrieved from io.getloc(), and writes
+ * the resulting characters to @a s. For example, the value 1001 in a
+ * US locale would write "$10.01" to @a s.
+ *
+ * This function is a hook for derived classes to change the value
+ * returned. @see put().
+ *
+ * @param s The stream to write to.
+ * @param intl Parameter to use_facet<moneypunct<CharT,intl> >.
+ * @param io Source of facets and io state.
+ * @param fill char_type to use for padding.
+ * @param units Place to store result of parsing.
+ * @return Iterator after writing.
+ */
+ virtual iter_type
+ do_put(iter_type __s, bool __intl, ios_base& __io, char_type __fill,
+ long double __units) const;
+
+ /**
+ * @brief Format and output a monetary value.
+ *
+ * This function formats @a digits as a monetary value according to
+ * moneypunct and ctype facets retrieved from io.getloc(), and writes
+ * the resulting characters to @a s. For example, the string "1001" in
+ * a US locale would write "$10.01" to @a s.
+ *
+ * This function is a hook for derived classes to change the value
+ * returned. @see put().
+ *
+ * @param s The stream to write to.
+ * @param intl Parameter to use_facet<moneypunct<CharT,intl> >.
+ * @param io Source of facets and io state.
+ * @param fill char_type to use for padding.
+ * @param units Place to store result of parsing.
+ * @return Iterator after writing.
+ */
+ virtual iter_type
+ do_put(iter_type __s, bool __intl, ios_base& __io, char_type __fill,
+ const string_type& __digits) const;
+
+ template<bool _Intl>
+ iter_type
+ _M_insert(iter_type __s, ios_base& __io, char_type __fill,
+ const string_type& __digits) const;
};
- template<>
- moneypunct_byname<char, false>::
- moneypunct_byname(const char*, size_t __refs);
- template<>
- moneypunct_byname<char, true>::
- moneypunct_byname(const char*, size_t __refs);
-#ifdef _GLIBCPP_USE_WCHAR_T
- template<>
- moneypunct_byname<wchar_t,false>::
- moneypunct_byname(const char*, size_t __refs);
- template<>
- moneypunct_byname<wchar_t,true>::
- moneypunct_byname (const char*, size_t __refs);
-#endif
+ template<typename _CharT, typename _OutIter>
+ locale::id money_put<_CharT, _OutIter>::id;
+ /**
+ * @brief Messages facet base class providing catalog typedef.
+ */
struct messages_base
{
typedef int catalog;
};
+ /**
+ * @brief Facet for handling message catalogs
+ *
+ * This facet encapsulates the code to retrieve messages from
+ * message catalogs. The only thing defined by the standard for this facet
+ * is the interface. All underlying functionality is
+ * implementation-defined.
+ *
+ * This library currently implements 3 versions of the message facet. The
+ * first version (gnu) is a wrapper around gettext, provided by libintl.
+ * The second version (ieee) is a wrapper around catgets. The final
+ * version (default) does no actual translation. These implementations are
+ * only provided for char and wchar_t instantiations.
+ *
+ * The messages template uses protected virtual functions to
+ * provide the actual results. The public accessors forward the
+ * call to the virtual functions. These virtual functions are
+ * hooks for developers to implement the behavior they require from
+ * the messages facet.
+ */
template<typename _CharT>
- class _Messages : public locale::facet, public messages_base
+ class messages : public locale::facet, public messages_base
{
public:
- typedef _CharT char_type;
- typedef basic_string<_CharT> string_type;
+ // Types:
+ //@{
+ /// Public typedefs
+ typedef _CharT char_type;
+ typedef basic_string<_CharT> string_type;
+ //@}
- catalog
- open(const basic_string<char>& __s, const locale& __loc) const
- { return do_open(__s, __loc); }
+ protected:
+ // Underlying "C" library locale information saved from
+ // initialization, needed by messages_byname as well.
+ __c_locale _M_c_locale_messages;
+ const char* _M_name_messages;
- string_type
+ public:
+ /// Numpunct facet id.
+ static locale::id id;
+
+ /**
+ * @brief Constructor performs initialization.
+ *
+ * This is the constructor provided by the standard.
+ *
+ * @param refs Passed to the base facet class.
+ */
+ explicit
+ messages(size_t __refs = 0);
+
+ // Non-standard.
+ /**
+ * @brief Internal constructor. Not for general use.
+ *
+ * This is a constructor for use by the library itself to set up new
+ * locales.
+ *
+ * @param cloc The "C" locale.
+ * @param s The name of a locale.
+ * @param refs Refcount to pass to the base class.
+ */
+ explicit
+ messages(__c_locale __cloc, const char* __s, size_t __refs = 0);
+
+ /*
+ * @brief Open a message catalog.
+ *
+ * This function opens and returns a handle to a message catalog by
+ * returning do_open(s, loc).
+ *
+ * @param s The catalog to open.
+ * @param loc Locale to use for character set conversions.
+ * @return Handle to the catalog or value < 0 if open fails.
+ */
+ catalog
+ open(const basic_string<char>& __s, const locale& __loc) const
+ { return this->do_open(__s, __loc); }
+
+ // Non-standard and unorthodox, yet effective.
+ /*
+ * @brief Open a message catalog.
+ *
+ * This non-standard function opens and returns a handle to a message
+ * catalog by returning do_open(s, loc). The third argument provides a
+ * message catalog root directory for gnu gettext and is ignored
+ * otherwise.
+ *
+ * @param s The catalog to open.
+ * @param loc Locale to use for character set conversions.
+ * @param dir Message catalog root directory.
+ * @return Handle to the catalog or value < 0 if open fails.
+ */
+ catalog
+ open(const basic_string<char>&, const locale&, const char*) const;
+
+ /*
+ * @brief Look up a string in a message catalog.
+ *
+ * This function retrieves and returns a message from a catalog by
+ * returning do_get(c, set, msgid, s).
+ *
+ * For gnu, @a set and @a msgid are ignored. Returns gettext(s).
+ * For default, returns s. For ieee, returns catgets(c,set,msgid,s).
+ *
+ * @param c The catalog to access.
+ * @param set Implementation-defined.
+ * @param msgid Implementation-defined.
+ * @param s Default return value if retrieval fails.
+ * @return Retrieved message or @a s if get fails.
+ */
+ string_type
get(catalog __c, int __set, int __msgid, const string_type& __s) const
- { return do_get(__c,__set,__msgid,__s); }
-
- void
+ { return this->do_get(__c, __set, __msgid, __s); }
+
+ /*
+ * @brief Close a message catalog.
+ *
+ * Closes catalog @a c by calling do_close(c).
+ *
+ * @param c The catalog to close.
+ */
+ void
close(catalog __c) const
- { return do_close(__c); }
+ { return this->do_close(__c); }
protected:
- explicit
- _Messages(size_t __refs = 0) : locale::facet(__refs) { }
-
- virtual
- ~_Messages() { }
-
- // NB: Probably these should be pure, and implemented only in
- // specializations of messages<>. But for now...
- virtual catalog
- do_open(const basic_string<char>&, const locale&) const
- { return 0; }
-
- virtual string_type
- do_get(catalog, int, int /*__msgid*/, const string_type& __dfault) const
- { return __dfault; }
+ /// Destructor.
+ virtual
+ ~messages();
+
+ /*
+ * @brief Open a message catalog.
+ *
+ * This function opens and returns a handle to a message catalog in an
+ * implementation-defined manner. This function is a hook for derived
+ * classes to change the value returned.
+ *
+ * @param s The catalog to open.
+ * @param loc Locale to use for character set conversions.
+ * @return Handle to the opened catalog, value < 0 if open failed.
+ */
+ virtual catalog
+ do_open(const basic_string<char>&, const locale&) const;
+
+ /*
+ * @brief Look up a string in a message catalog.
+ *
+ * This function retrieves and returns a message from a catalog in an
+ * implementation-defined manner. This function is a hook for derived
+ * classes to change the value returned.
+ *
+ * For gnu, @a set and @a msgid are ignored. Returns gettext(s).
+ * For default, returns s. For ieee, returns catgets(c,set,msgid,s).
+ *
+ * @param c The catalog to access.
+ * @param set Implementation-defined.
+ * @param msgid Implementation-defined.
+ * @param s Default return value if retrieval fails.
+ * @return Retrieved message or @a s if get fails.
+ */
+ virtual string_type
+ do_get(catalog, int, int, const string_type& __dfault) const;
+
+ /*
+ * @brief Close a message catalog.
+ *
+ * @param c The catalog to close.
+ */
+ virtual void
+ do_close(catalog) const;
+
+ // Returns a locale and codeset-converted string, given a char* message.
+ char*
+ _M_convert_to_char(const string_type& __msg) const
+ {
+ // XXX
+ return reinterpret_cast<char*>(const_cast<_CharT*>(__msg.c_str()));
+ }
- virtual void
- do_close (catalog) const { }
- };
+ // Returns a locale and codeset-converted string, given a char* message.
+ string_type
+ _M_convert_from_char(char*) const
+ {
+#if 0
+ // Length of message string without terminating null.
+ size_t __len = char_traits<char>::length(__msg) - 1;
+
+ // "everybody can easily convert the string using
+ // mbsrtowcs/wcsrtombs or with iconv()"
+
+ // Convert char* to _CharT in locale used to open catalog.
+ // XXX need additional template parameter on messages class for this..
+ // typedef typename codecvt<char, _CharT, _StateT> __codecvt_type;
+ typedef typename codecvt<char, _CharT, mbstate_t> __codecvt_type;
+
+ __codecvt_type::state_type __state;
+ // XXX may need to initialize state.
+ //initialize_state(__state._M_init());
+
+ char* __from_next;
+ // XXX what size for this string?
+ _CharT* __to = static_cast<_CharT*>(__builtin_alloca(__len + 1));
+ const __codecvt_type& __cvt = use_facet<__codecvt_type>(_M_locale_conv);
+ __cvt.out(__state, __msg, __msg + __len, __from_next,
+ __to, __to + __len + 1, __to_next);
+ return string_type(__to);
+#endif
+#if 0
+ typedef ctype<_CharT> __ctype_type;
+ // const __ctype_type& __cvt = use_facet<__ctype_type>(_M_locale_msg);
+ const __ctype_type& __cvt = use_facet<__ctype_type>(locale());
+ // XXX Again, proper length of converted string an issue here.
+ // For now, assume the converted length is not larger.
+ _CharT* __dest = static_cast<_CharT*>(__builtin_alloca(__len + 1));
+ __cvt.widen(__msg, __msg + __len, __dest);
+ return basic_string<_CharT>(__dest);
+#endif
+ return string_type();
+ }
+ };
template<typename _CharT>
- class messages : public _Messages<_CharT>
- {
- public:
- typedef _CharT char_type;
- typedef basic_string<_CharT> string_type;
- static locale::id id;
+ locale::id messages<_CharT>::id;
- explicit
- messages(size_t __refs = 0) : _Messages<_CharT> (__refs) { }
- protected:
- virtual
- ~messages() { }
- };
+ // Specializations for required instantiations.
+ template<>
+ string
+ messages<char>::do_get(catalog, int, int, const string&) const;
+
+#ifdef _GLIBCXX_USE_WCHAR_T
+ template<>
+ wstring
+ messages<wchar_t>::do_get(catalog, int, int, const wstring&) const;
+#endif
template<typename _CharT>
class messages_byname : public messages<_CharT>
{
public:
- typedef _CharT char_type;
- typedef basic_string<_CharT> string_type;
+ typedef _CharT char_type;
+ typedef basic_string<_CharT> string_type;
- explicit
- messages_byname(const char*, size_t __refs = 0);
+ explicit
+ messages_byname(const char* __s, size_t __refs = 0);
protected:
- virtual
- ~messages_byname() { }
+ virtual
+ ~messages_byname()
+ { }
};
- template<>
- messages_byname<char>::messages_byname(const char*, size_t __refs);
-#ifdef _GLIBCPP_USE_WCHAR_T
- template<>
- messages_byname<wchar_t>::messages_byname(const char*, size_t __refs);
-#endif
+ // Include host and configuration specific messages functions.
+ #include <bits/messages_members.h>
- // Subclause convenience interfaces, inlines
- // NB: these are inline
- // because, when used in a loop, some compilers can hoist the body
- // out of the loop; then it's just as fast as the C is*() function.
+
+ // Subclause convenience interfaces, inlines.
+ // NB: These are inline because, when used in a loop, some compilers
+ // can hoist the body out of the loop; then it's just as fast as the
+ // C is*() function.
+ //@{
+ /// Convenience interface to ctype.is().
template<typename _CharT>
- inline bool
+ inline bool
isspace(_CharT __c, const locale& __loc)
{ return use_facet<ctype<_CharT> >(__loc).is(ctype_base::space, __c); }
template<typename _CharT>
- inline bool
+ inline bool
isprint(_CharT __c, const locale& __loc)
{ return use_facet<ctype<_CharT> >(__loc).is(ctype_base::print, __c); }
template<typename _CharT>
- inline bool
+ inline bool
iscntrl(_CharT __c, const locale& __loc)
{ return use_facet<ctype<_CharT> >(__loc).is(ctype_base::cntrl, __c); }
template<typename _CharT>
- inline bool
+ inline bool
isupper(_CharT __c, const locale& __loc)
{ return use_facet<ctype<_CharT> >(__loc).is(ctype_base::upper, __c); }
{ return use_facet<ctype<_CharT> >(__loc).is(ctype_base::lower, __c); }
template<typename _CharT>
- inline bool
+ inline bool
isalpha(_CharT __c, const locale& __loc)
{ return use_facet<ctype<_CharT> >(__loc).is(ctype_base::alpha, __c); }
template<typename _CharT>
- inline bool
+ inline bool
isdigit(_CharT __c, const locale& __loc)
{ return use_facet<ctype<_CharT> >(__loc).is(ctype_base::digit, __c); }
template<typename _CharT>
- inline bool
+ inline bool
ispunct(_CharT __c, const locale& __loc)
{ return use_facet<ctype<_CharT> >(__loc).is(ctype_base::punct, __c); }
template<typename _CharT>
- inline bool
+ inline bool
isxdigit(_CharT __c, const locale& __loc)
{ return use_facet<ctype<_CharT> >(__loc).is(ctype_base::xdigit, __c); }
template<typename _CharT>
- inline bool
+ inline bool
isalnum(_CharT __c, const locale& __loc)
{ return use_facet<ctype<_CharT> >(__loc).is(ctype_base::alnum, __c); }
template<typename _CharT>
- inline bool
+ inline bool
isgraph(_CharT __c, const locale& __loc)
{ return use_facet<ctype<_CharT> >(__loc).is(ctype_base::graph, __c); }
template<typename _CharT>
- inline _CharT
+ inline _CharT
toupper(_CharT __c, const locale& __loc)
{ return use_facet<ctype<_CharT> >(__loc).toupper(__c); }
template<typename _CharT>
- inline _CharT
+ inline _CharT
tolower(_CharT __c, const locale& __loc)
{ return use_facet<ctype<_CharT> >(__loc).tolower(__c); }
-
+ //@}
} // namespace std
-#endif /* _CPP_BITS_LOCFACETS_H */
-
-// Local Variables:
-// mode:c++
-// End:
-
+#endif