-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# PARTICULAR PURPOSE.
@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
$(top_srcdir)/../config/multi.m4 \
$(top_srcdir)/../config/no-executables.m4 \
$(top_srcdir)/../config/override.m4 \
- $(top_srcdir)/../config/proginstall.m4 \
$(top_srcdir)/../config/stdint.m4 \
$(top_srcdir)/../config/unwind_ipinfo.m4 \
$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
- $(top_srcdir)/crossconfig.m4 $(top_srcdir)/linkage.m4 \
- $(top_srcdir)/acinclude.m4 $(top_srcdir)/../config/tls.m4 \
- $(top_srcdir)/configure.ac
+ $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \
+ $(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
depcomp =
am__depfiles_maybe =
SOURCES =
C_INCLUDE_DIR = @C_INCLUDE_DIR@
DEBUG_FLAGS = @DEBUG_FLAGS@
DEFS = @DEFS@
+DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
-ENABLE_PARALLEL_FALSE = @ENABLE_PARALLEL_FALSE@
-ENABLE_PARALLEL_TRUE = @ENABLE_PARALLEL_TRUE@
-ENABLE_SYMVERS_DARWIN_FALSE = @ENABLE_SYMVERS_DARWIN_FALSE@
-ENABLE_SYMVERS_DARWIN_TRUE = @ENABLE_SYMVERS_DARWIN_TRUE@
-ENABLE_SYMVERS_FALSE = @ENABLE_SYMVERS_FALSE@
-ENABLE_SYMVERS_GNU_FALSE = @ENABLE_SYMVERS_GNU_FALSE@
-ENABLE_SYMVERS_GNU_NAMESPACE_FALSE = @ENABLE_SYMVERS_GNU_NAMESPACE_FALSE@
-ENABLE_SYMVERS_GNU_NAMESPACE_TRUE = @ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@
-ENABLE_SYMVERS_GNU_TRUE = @ENABLE_SYMVERS_GNU_TRUE@
-ENABLE_SYMVERS_TRUE = @ENABLE_SYMVERS_TRUE@
-ENABLE_VISIBILITY_FALSE = @ENABLE_VISIBILITY_FALSE@
-ENABLE_VISIBILITY_TRUE = @ENABLE_VISIBILITY_TRUE@
ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@
EXEEXT = @EXEEXT@
EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
FGREP = @FGREP@
-GLIBCXX_BUILD_DEBUG_FALSE = @GLIBCXX_BUILD_DEBUG_FALSE@
-GLIBCXX_BUILD_DEBUG_TRUE = @GLIBCXX_BUILD_DEBUG_TRUE@
-GLIBCXX_BUILD_PCH_FALSE = @GLIBCXX_BUILD_PCH_FALSE@
-GLIBCXX_BUILD_PCH_TRUE = @GLIBCXX_BUILD_PCH_TRUE@
-GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE = @GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE@
-GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE = @GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE@
-GLIBCXX_C_HEADERS_C_FALSE = @GLIBCXX_C_HEADERS_C_FALSE@
-GLIBCXX_C_HEADERS_C_GLOBAL_FALSE = @GLIBCXX_C_HEADERS_C_GLOBAL_FALSE@
-GLIBCXX_C_HEADERS_C_GLOBAL_TRUE = @GLIBCXX_C_HEADERS_C_GLOBAL_TRUE@
-GLIBCXX_C_HEADERS_C_STD_FALSE = @GLIBCXX_C_HEADERS_C_STD_FALSE@
-GLIBCXX_C_HEADERS_C_STD_TRUE = @GLIBCXX_C_HEADERS_C_STD_TRUE@
-GLIBCXX_C_HEADERS_C_TRUE = @GLIBCXX_C_HEADERS_C_TRUE@
-GLIBCXX_C_HEADERS_EXTRA_FALSE = @GLIBCXX_C_HEADERS_EXTRA_FALSE@
-GLIBCXX_C_HEADERS_EXTRA_TRUE = @GLIBCXX_C_HEADERS_EXTRA_TRUE@
-GLIBCXX_HOSTED_FALSE = @GLIBCXX_HOSTED_FALSE@
-GLIBCXX_HOSTED_TRUE = @GLIBCXX_HOSTED_TRUE@
GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@
-GLIBCXX_LDBL_COMPAT_FALSE = @GLIBCXX_LDBL_COMPAT_FALSE@
-GLIBCXX_LDBL_COMPAT_TRUE = @GLIBCXX_LDBL_COMPAT_TRUE@
GLIBCXX_LIBS = @GLIBCXX_LIBS@
GREP = @GREP@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
-LIBMATHOBJS = @LIBMATHOBJS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@
LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
OPT_LDFLAGS = @OPT_LDFLAGS@
OS_INC_SRCDIR = @OS_INC_SRCDIR@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
VERSION = @VERSION@
WARN_FLAGS = @WARN_FLAGS@
WERROR = @WERROR@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_AS = @ac_ct_AS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
check_msgfmt = @check_msgfmt@
datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
+htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libtool_VERSION = @libtool_VERSION@
+localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
port_specific_symbol_files = @port_specific_symbol_files@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
toplevel_srcdir = @toplevel_srcdir@
# May be used by various substitution variables.
AM_CPPFLAGS = $(GLIBCXX_INCLUDES)
# Doxygen configuration
-# Assumes doxygen, graphviz (with dot) installed
-doc_doxygen_script = ${top_srcdir}/scripts/run_doxygen
-doxygen_xmldir = ${glibcxx_builddir}/doc/doxygen/xml
-
-# Performance doc and graph configuration.
-# Assumes pychart, beautiful soup installed.
-# Generates the plots and graphs for performance testing.
-doc_performance_script = ${top_srcdir}/scripts/make_graphs.py
+# Assumes doxygen, graphviz (with dot), pdflatex installed
+doxygen_script = ${top_srcdir}/scripts/run_doxygen
+doxygen_outdir = ${glibcxx_builddir}/doc/doxygen
+doxygen_pdf = ${doxygen_outdir}/latex/refman.pdf
# Docbook configuration.
# Assumes
# libxslt
+# dblatex
+# pdflatex
# docbook-style-xsl
-# emacs-nxml-mode
+# emacs-nxml-mode
# xmlto passivetex
-xml_srcdir = ${glibcxx_srcdir}/doc/xml
-xml_sources = \
- ${xml_srcdir}/spine.xml \
- ${xml_srcdir}/authors.xml \
- ${xml_srcdir}/manual/abi.xml \
- ${xml_srcdir}/manual/algorithms.xml \
- ${xml_srcdir}/manual/allocator.xml \
- ${xml_srcdir}/manual/auto_ptr.xml \
- ${xml_srcdir}/manual/backwards_compatibility.xml \
- ${xml_srcdir}/manual/bitmap_allocator.xml \
- ${xml_srcdir}/manual/build_hacking.xml \
- ${xml_srcdir}/manual/codecvt.xml \
- ${xml_srcdir}/manual/concurrency.xml \
- ${xml_srcdir}/manual/configure.xml \
- ${xml_srcdir}/manual/containers.xml \
- ${xml_srcdir}/manual/ctype.xml \
- ${xml_srcdir}/manual/debug_mode.xml \
- ${xml_srcdir}/manual/debug.xml \
- ${xml_srcdir}/manual/diagnostics.xml \
- ${xml_srcdir}/manual/evolution.xml \
- ${xml_srcdir}/manual/extensions.xml \
- ${xml_srcdir}/manual/internals.xml \
- ${xml_srcdir}/manual/intro.xml \
- ${xml_srcdir}/manual/io.xml \
- ${xml_srcdir}/manual/iterators.xml \
- ${xml_srcdir}/manual/locale.xml \
- ${xml_srcdir}/manual/localization.xml \
- ${xml_srcdir}/manual/messages.xml \
- ${xml_srcdir}/manual/mt_allocator.xml \
- ${xml_srcdir}/manual/numerics.xml \
- ${xml_srcdir}/manual/parallel_mode.xml \
- ${xml_srcdir}/manual/prerequisites.xml \
- ${xml_srcdir}/manual/internals.xml \
- ${xml_srcdir}/manual/shared_ptr.xml \
- ${xml_srcdir}/manual/spine.xml \
- ${xml_srcdir}/manual/status_cxx1998.xml \
- ${xml_srcdir}/manual/status_cxx200x.xml \
- ${xml_srcdir}/manual/status_cxxtr1.xml \
- ${xml_srcdir}/manual/strings.xml \
- ${xml_srcdir}/manual/support.xml \
- ${xml_srcdir}/manual/test.xml \
- ${xml_srcdir}/manual/using.xml \
- ${xml_srcdir}/manual/utilities.xml \
- ${xml_srcdir}/manual/appendix_free.xml \
- ${xml_srcdir}/manual/appendix_contributing.xml \
- ${xml_srcdir}/manual/appendix_porting.xml \
- ${xml_srcdir}/api.xml \
- ${xml_srcdir}/faq.xml
+docbook_outdir = ${glibcxx_builddir}/doc/docbook
+xml_dir = ${glibcxx_srcdir}/doc/xml
+xml_sources_basic = \
+ ${xml_dir}/spine.xml \
+ ${xml_dir}/authors.xml \
+ ${xml_dir}/api.xml \
+ ${xml_dir}/faq.xml
+
+xml_sources_manual = \
+ ${xml_dir}/manual/abi.xml \
+ ${xml_dir}/manual/algorithms.xml \
+ ${xml_dir}/manual/allocator.xml \
+ ${xml_dir}/manual/auto_ptr.xml \
+ ${xml_dir}/manual/atomics.xml \
+ ${xml_dir}/manual/backwards_compatibility.xml \
+ ${xml_dir}/manual/bitmap_allocator.xml \
+ ${xml_dir}/manual/build_hacking.xml \
+ ${xml_dir}/manual/codecvt.xml \
+ ${xml_dir}/manual/concurrency.xml \
+ ${xml_dir}/manual/concurrency_extensions.xml \
+ ${xml_dir}/manual/configure.xml \
+ ${xml_dir}/manual/containers.xml \
+ ${xml_dir}/manual/ctype.xml \
+ ${xml_dir}/manual/debug_mode.xml \
+ ${xml_dir}/manual/debug.xml \
+ ${xml_dir}/manual/diagnostics.xml \
+ ${xml_dir}/manual/evolution.xml \
+ ${xml_dir}/manual/extensions.xml \
+ ${xml_dir}/manual/internals.xml \
+ ${xml_dir}/manual/intro.xml \
+ ${xml_dir}/manual/io.xml \
+ ${xml_dir}/manual/iterators.xml \
+ ${xml_dir}/manual/locale.xml \
+ ${xml_dir}/manual/localization.xml \
+ ${xml_dir}/manual/messages.xml \
+ ${xml_dir}/manual/mt_allocator.xml \
+ ${xml_dir}/manual/numerics.xml \
+ ${xml_dir}/manual/parallel_mode.xml \
+ ${xml_dir}/manual/prerequisites.xml \
+ ${xml_dir}/manual/profile_mode.xml \
+ ${xml_dir}/manual/shared_ptr.xml \
+ ${xml_dir}/manual/spine.xml \
+ ${xml_dir}/manual/status_cxx1998.xml \
+ ${xml_dir}/manual/status_cxx200x.xml \
+ ${xml_dir}/manual/status_cxxtr1.xml \
+ ${xml_dir}/manual/status_cxxtr24733.xml \
+ ${xml_dir}/manual/strings.xml \
+ ${xml_dir}/manual/support.xml \
+ ${xml_dir}/manual/test.xml \
+ ${xml_dir}/manual/using.xml \
+ ${xml_dir}/manual/using_exceptions.xml \
+ ${xml_dir}/manual/utilities.xml \
+ ${xml_dir}/manual/appendix_free.xml \
+ ${xml_dir}/manual/appendix_contributing.xml \
+ ${xml_dir}/manual/appendix_porting.xml
xml_sources_extra = \
- ${xml_srcdir}/gnu/fdl-1.2.xml \
- ${xml_srcdir}/gnu/gpl-2.0.xml
+ ${xml_dir}/gnu/fdl-1.2.xml \
+ ${xml_dir}/gnu/gpl-2.0.xml \
+ ${xml_dir}/gnu/gpl-3.0.xml
+
+xml_sources = \
+ ${xml_sources_basic} \
+ ${xml_sources_manual} \
+ ${xml_sources_extra}
xml_noinst = \
- ${xml_srcdir}/book.txml \
- ${xml_srcdir}/chapter.txml \
- ${xml_srcdir}/class.txml
+ ${xml_dir}/book.txml \
+ ${xml_dir}/chapter.txml \
+ ${xml_dir}/class.txml
XSLTPROC = xsltproc
XSLTPROC_FLAGS = --nonet --xinclude
# Validate existing XML structure.
XMLLINT = xmllint
-#LINT_FLAGS = --debug --nonet --xinclude --nsclean --postvalid --nowarning
+#LINT_FLAGS = --debug --nonet --xinclude --nsclean --postvalid --nowarning
#LINT_FLAGS = --noblanks --noout --xinclude --postvalid --noent
LINT_FLAGS = --postvalid --debug --xinclude --noent --noblanks --nonet --noout
-VALID_FLAGS = --dtdvalid http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd
-XMLLINT_FLAGS = $(LINT_FLAGS) $(VALID_FLAGS)
+DTD_FLAGS = --dtdvalid http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd
+XMLLINT_FLAGS = $(LINT_FLAGS) $(DTD_FLAGS)
# PDF 1
# fop
PRINCE = prince
PRINCE_FLAGS = --log prince.log -o pdf/spine.pdf
+# PDF 5
+# dblatex
+DBLATEX_FLAGS = --dump --verbose --pdf -o ${docbook_outdir}/pdf/manual.pdf
+
+# Performance doc and graph configuration.
+# Assumes pychart, beautiful soup installed.
+# Generates the plots and graphs for performance testing.
+doc_performance_script = ${top_srcdir}/scripts/make_graphs.py
+
# By adding these files here, automake will remove them for 'make clean'
CLEANFILES = *.log
all: all-am
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps doc/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --foreign --ignore-deps doc/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps doc/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign --ignore-deps doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
tags: TAGS
TAGS:
distdir: $(DISTFILES)
- $(mkdir_p) $(distdir)/..
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
distclean: distclean-am
-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool
+distclean-am: clean-am distclean-generic
dvi: dvi-am
html: html-am
+html-am:
+
info: info-am
info-am:
install-data-am:
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
install-exec-am:
+install-html: install-html-am
+
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man:
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
ps-am:
-uninstall-am: uninstall-info-am
+uninstall-am:
+
+.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
clean-local distclean distclean-generic distclean-libtool \
distdir dvi dvi-am html html-am info info-am install \
- install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
+ install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- uninstall uninstall-am uninstall-info-am
+ uninstall uninstall-am
+
+
+# Documentation Overview
+#
+# There are two main source materials for libstdc++ documentation.
+# The first is the doxygen markup in libstdc++ sources. And the second
+# is the docbook markup in doc/xml/. A third and more obscure option
+# deals with charting performance tests.
+
+# Default, points to current best sub-rule that is the best conversion.
+# MAN
+doc-man: doc-man-doxygen
+
+# PDF
+doc-pdf: doc-pdf-docbook
+
+# HTML
+doc-html: doc-html-docbook
doc-html-doxygen:
-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
builddir=`cd ..; ${PWD_COMMAND}`; \
- ${SHELL} ${doc_doxygen_script} \
- --host_alias=${host_alias} --mode=html $${srcdir} $${builddir})
+ ${SHELL} ${doxygen_script} \
+ --host_alias=${host_alias} --mode=html $${srcdir} $${builddir} YES)
doc-man-doxygen:
-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
builddir=`cd ..; ${PWD_COMMAND}`; \
- ${SHELL} ${doc_doxygen_script} \
- --host_alias=${host_alias} --mode=man $${srcdir} $${builddir})
+ ${SHELL} ${doxygen_script} \
+ --host_alias=${host_alias} --mode=man $${srcdir} $${builddir} YES)
doc-xml-doxygen:
-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
builddir=`cd ..; ${PWD_COMMAND}`; \
- ${SHELL} ${doc_doxygen_script} \
- --host_alias=${host_alias} --mode=xml $${srcdir} $${builddir})
-doc-xml-doxygen-single: doc-xml-doxygen
- @echo "Generating doxygen xml single file..."
- $(XSLTPROC) ${doxygen_xmldir}/combine.xslt ${doxygen_xmldir}/spine.xml > ${doxygen_xmldir}/all.xml;
-doc-html-performance:
- -@(chmod + ${doc_performance_script}; \
- ${doc_performance_script} ${top_srcdir} \
- ${glibcxx_builddir}/testsuite \
- ${top_srcdir}/testsuite/data/make_graph_htmls.xml \
- ${top_srcdir}/testsuite/data/make_graph_test_infos.xml local g++)
-
-${glibcxx_builddir}/doc/html:
- mkdir ${glibcxx_builddir}/doc/html
+ ${SHELL} ${doxygen_script} \
+ --host_alias=${host_alias} --mode=xml $${srcdir} $${builddir} NO)
-${glibcxx_builddir}/doc/pdf:
- mkdir ${glibcxx_builddir}/doc/pdf
-
-${glibcxx_builddir}/doc/fo:
- mkdir ${glibcxx_builddir}/doc/fo
+doc-xml-single-doxygen:
+ @echo "Generating doxygen xml single file..."
+ $(XSLTPROC) ${doxygen_outdir}/xml/combine.xslt \
+ ${doxygen_outdir}/xml/index.xml > ${doxygen_outdir}/xml/api-spine.xml;
-${glibcxx_builddir}/doc/xml:
- mkdir ${glibcxx_builddir}/doc/xml
-doc-xml-validate: $(xml_sources)
+doc-latex-doxygen:
+ -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+ builddir=`cd ..; ${PWD_COMMAND}`; \
+ ${SHELL} ${doxygen_script} \
+ --host_alias=${host_alias} --mode=latex $${srcdir} $${builddir} NO)
+
+# Chance of loooooonnggg creation time on this rule.
+doc-pdf-doxygen: stamp-latex-doxygen
+ -(cd ${doxygen_outdir}/latex && $(MAKE) -i pdf;)
+ echo "Generating doxygen pdf file...";
+ if [ -f ${doxygen_pdf} ]; then \
+ echo "... ${doxygen_pdf}"; \
+ else \
+ echo "... error"; \
+ exit 12; \
+ fi
+
+stamp-pdf-doxygen:
+ @if [ ! -f stamp-pdf-doxygen ]; then \
+ $(MAKE) doc-pdf-doxygen; \
+ fi
+ $(STAMP) stamp-pdf-doxygen
+
+stamp-xml-doxygen:
+ @if [ ! -f stamp-xml-doxygen ]; then \
+ $(MAKE) doc-xml-doxygen; \
+ $(MAKE) doc-xml-single-doxygen; \
+ fi
+ $(STAMP) stamp-xml-doxygen
+
+stamp-latex-doxygen:
+ @if [ ! -f stamp-latex-doxygen ]; then \
+ $(MAKE) doc-latex-doxygen; \
+ fi
+ $(STAMP) stamp-latex-doxygen
+
+${docbook_outdir}/html:
+ mkdir -p ${docbook_outdir}/html
+
+${docbook_outdir}/pdf:
+ mkdir -p ${docbook_outdir}/pdf
+
+${docbook_outdir}/fo:
+ mkdir -p ${docbook_outdir}/fo
+
+${docbook_outdir}/xml:
+ mkdir -p ${docbook_outdir}/xml
+doc-xml-validate-docbook: $(xml_sources)
@echo "Generating XML validation log..."
$(XMLLINT) $(XMLLINT_FLAGS) ${top_srcdir}/doc/xml/spine.xml
-doc-xml-single: $(xml_sources) ${glibcxx_builddir}/doc/xml
+doc-xml-single-docbook: $(xml_sources) ${docbook_outdir}/xml
@echo "Generating XML single..."
$(XMLLINT) --xinclude --noent --noblanks \
- -o ${glibcxx_builddir}/doc/xml/spine-single.xml \
+ -o ${docbook_outdir}/xml/spine-single.xml \
${top_srcdir}/doc/xml/spine.xml
# HTML, index plus chapters
-doc-html: $(xml_sources) ${glibcxx_builddir}/doc/html
+doc-html-docbook: $(xml_sources) ${docbook_outdir}/html
@echo "Generating html files..."
- $(XSLTPROC) $(XSLTPROC_FLAGS) -o ${glibcxx_builddir}/doc/html/ \
+ $(XSLTPROC) $(XSLTPROC_FLAGS) -o ${docbook_outdir}/html/ \
$(XSL_HTML_STYLE) ${top_srcdir}/doc/xml/spine.xml
# HTML, all one page
-doc-html-single: $(xml_sources) ${glibcxx_builddir}/doc/html
+doc-html-single-docbook: $(xml_sources) ${docbook_outdir}/html
@echo "Generating html single file..."
- $(XSLTPROC) $(XSLTPROC_FLAGS) -o ${glibcxx_builddir}/doc/html/ \
+ $(XSLTPROC) $(XSLTPROC_FLAGS) -o ${docbook_outdir}/html/ \
$(XSL_HTML_SINGLE_STYLE) ${top_srcdir}/doc/xml/spine.xml
# FO
-doc-fo: $(xml_sources) ${glibcxx_builddir}/doc/fo
+doc-fo-docbook: $(xml_sources) ${docbook_outdir}/fo
@echo "Generating FO files..."
- $(XSLTPROC) $(XSLTPROC_FLAGS) -o ${glibcxx_builddir}/doc/fo/spine.fo \
+ $(XSLTPROC) $(XSLTPROC_FLAGS) -o ${docbook_outdir}/fo/spine.fo \
$(XSL_FO_STYLE) ${top_srcdir}/doc/xml/spine.xml
-
-# PDF
-# Points to current best xml to PDF generation process.
-doc-pdf: doc-pdf-prince
-doc-pdf-fop-xml: $(xml_sources) ${glibcxx_builddir}/doc/pdf
+doc-pdf-fop-xml-docbook: $(xml_sources) ${glibcxx_builddir}/doc/pdf
@echo "Generating pdf fop files from xml..."
$(FOP) $(FOP_FLAGS) -xml ${top_srcdir}/doc/xml/spine.xml \
- -xsl $(XSL_FO_STYLE) -pdf ${glibcxx_builddir}/doc/pdf/spine.pdf
+ -xsl $(XSL_FO_STYLE) -pdf ${docbook_outdir}/pdf/spine.pdf
-doc-pdf-fop-fo: $(xml_sources) ${glibcxx_builddir}/doc/pdf doc-fo
+doc-pdf-fop-fo-docbook: $(xml_sources) ${glibcxx_builddir}/doc/pdf doc-fo
@echo "Generating pdf fop files from fo..."
- $(FOP) $(FOP_FLAGS) -fo ${glibcxx_builddir}/doc/fo/spine.fo \
- -pdf ${glibcxx_builddir}/doc/pdf/spine.pdf
-doc-pdf-xmlto: $(xml_sources) ${glibcxx_builddir}/doc/pdf
+ $(FOP) $(FOP_FLAGS) -fo ${docbook_outdir}/fo/spine.fo \
+ -pdf ${docbook_outdir}/pdf/spine.pdf
+doc-pdf-xmlto-docbook: $(xml_sources) ${docbook_outdir}/pdf
@echo "Generating pdf xmlto files..."
$(XML2PDF) $(XML2PDF_FLAGS) ${top_srcdir}/doc/xml/spine.xml
-doc-pdf-xmlroff: $(xml_sources) doc-fo
+doc-pdf-xmlroff-docbook: $(xml_sources) doc-fo
@echo "Generating pdf xmlroff files..."
- $(XMLROFF) $(XMLROFF_FLAGS) ${glibcxx_builddir}/doc/fo/spine.fo
-doc-pdf-prince: $(xml_sources) ${glibcxx_builddir}/doc/pdf
+ $(XMLROFF) $(XMLROFF_FLAGS) ${docbook_outdir}/fo/spine.fo
+doc-pdf-prince-docbook: $(xml_sources) ${docbook_outdir}/pdf
@echo "Generating pdf prince files..."
- $(PRINCE) $(PRINCE_FLAGS) ${top_srcdir}/doc/xml/spine.xml
+ $(PRINCE) $(PRINCE_FLAGS) ${top_srcdir}/xml/spine.xml
+doc-pdf-dblatex-docbook: $(xml_sources) ${docbook_outdir}/pdf
+ @echo "Generating pdf dblatex files..."
+ dblatex $(DBLATEX_FLAGS) ${top_srcdir}/doc/xml/spine.xml
+
+doc-pdf-docbook: doc-pdf-dblatex-docbook
+doc-html-performance:
+ -@(chmod + ${doc_performance_script}; \
+ ${doc_performance_script} ${top_srcdir} \
+ ${glibcxx_builddir}/testsuite \
+ ${top_srcdir}/testsuite/data/make_graph_htmls.xml \
+ ${top_srcdir}/testsuite/data/make_graph_test_infos.xml local g++)
.PHONY: doc-doxygen-html doc-doxygen-man doc-performance
# To remove directories.
clean-local:
- rm -rf man html pdf fo doxygen xml
+ rm -rf man html pdf fo xml doxygen docbook stamp*
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
OSDN Git Service
