build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(top_srcdir)/fragment.am
+DIST_COMMON = $(top_srcdir)/fragment.am $(srcdir)/Makefile.in \
+ $(srcdir)/Makefile.am
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../config/enable.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
+ $(top_srcdir)/../config/enable.m4 \
$(top_srcdir)/../config/futex.m4 \
$(top_srcdir)/../config/iconv.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/lib-ld.m4 \
$(top_srcdir)/../config/lib-link.m4 \
$(top_srcdir)/../config/lib-prefix.m4 \
+ $(top_srcdir)/../config/lthostflags.m4 \
$(top_srcdir)/../config/multi.m4 \
$(top_srcdir)/../config/no-executables.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
$(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \
$(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/../config/gc++filt.m4 \
$(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
depcomp =
am__depfiles_maybe =
SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@
ACLOCAL = @ACLOCAL@
ALLOCATOR_H = @ALLOCATOR_H@
CTIME_H = @CTIME_H@
CXX = @CXX@
CXXCPP = @CXXCPP@
+CXXFILT = @CXXFILT@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
C_INCLUDE_DIR = @C_INCLUDE_DIR@
+DBLATEX = @DBLATEX@
DEBUG_FLAGS = @DEBUG_FLAGS@
DEFS = @DEFS@
+DOT = @DOT@
+DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+PDFLATEX = @PDFLATEX@
RANLIB = @RANLIB@
SECTION_FLAGS = @SECTION_FLAGS@
SECTION_LDFLAGS = @SECTION_LDFLAGS@
VERSION = @VERSION@
WARN_FLAGS = @WARN_FLAGS@
WERROR = @WERROR@
+
+# Validate existing XML structure.
+XMLLINT = xmllint
+XSLTPROC = xsltproc
+XSL_STYLE_DIR = @XSL_STYLE_DIR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
am__tar = @am__tar@
am__untar = @am__untar@
baseline_dir = @baseline_dir@
+baseline_subdir_switch = @baseline_subdir_switch@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
glibcxx_localedir = @glibcxx_localedir@
glibcxx_prefixdir = @glibcxx_prefixdir@
glibcxx_srcdir = @glibcxx_srcdir@
-glibcxx_thread_h = @glibcxx_thread_h@
glibcxx_toolexecdir = @glibcxx_toolexecdir@
glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
gxx_include_dir = @gxx_include_dir@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
-htmldir = @htmldir@
+
+# HTML
+htmldir = "$(DESTDIR)@docdir@"
includedir = @includedir@
-infodir = @infodir@
+
+# TEXINFO,INFO
+infodir = "$(DESTDIR)@infodir@"
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libtool_VERSION = @libtool_VERSION@
localedir = @localedir@
localstatedir = @localstatedir@
-mandir = @mandir@
+lt_host_flags = @lt_host_flags@
+
+# MAN
+mandir = "$(DESTDIR)@mandir@"
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
+
+# PDF
+pdfdir = "$(DESTDIR)@docdir@"
port_specific_symbol_files = @port_specific_symbol_files@
prefix = @prefix@
program_transform_name = @program_transform_name@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
+toplevel_builddir = @toplevel_builddir@
toplevel_srcdir = @toplevel_srcdir@
# May be used by various substitution variables.
# These bits are all figured out from configure. Look in acinclude.m4
# or configure.ac to see how they are set. See GLIBCXX_EXPORT_FLAGS.
CONFIG_CXXFLAGS = \
- $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS)
+ $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS) -frandom-seed=$@
WARN_CXXFLAGS = \
- $(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once
+ $(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once -Wabi
# -I/-D flags to pass when compiling.
AM_CPPFLAGS = $(GLIBCXX_INCLUDES)
+@BUILD_XML_FALSE@STAMP_XML =
+
+# Documentation Overview
+#
+# There are two main input materials for libstdc++ documentation.
+# The first is the doxygen markup in libstdc++ sources, which is a
+# reference to the API. And the second is the manual, via docbook markup in
+# doc/xml/.
+#
+# A third and more obscure option deals with charting performance
+# tests, and should be considered experimental.
+
+# Documentation conditionals for output.
+@BUILD_XML_TRUE@STAMP_XML = doc-xml
+@BUILD_XML_FALSE@STAMP_INSTALL_XML =
+@BUILD_XML_TRUE@STAMP_INSTALL_XML = doc-install-xml
+@BUILD_HTML_FALSE@STAMP_HTML =
+@BUILD_HTML_TRUE@STAMP_HTML = doc-html
+@BUILD_HTML_FALSE@STAMP_INSTALL_HTML =
+@BUILD_HTML_TRUE@STAMP_INSTALL_HTML = doc-install-html
+@BUILD_MAN_FALSE@STAMP_MAN =
+@BUILD_MAN_TRUE@STAMP_MAN = doc-man
+@BUILD_MAN_FALSE@STAMP_INSTALL_MAN =
+@BUILD_MAN_TRUE@STAMP_INSTALL_MAN = doc-install-man
+@BUILD_PDF_FALSE@STAMP_PDF =
+@BUILD_PDF_TRUE@STAMP_PDF = doc-pdf
+@BUILD_PDF_FALSE@STAMP_INSTALL_PDF =
+@BUILD_PDF_TRUE@STAMP_INSTALL_PDF = doc-install-pdf
+@BUILD_EPUB_FALSE@STAMP_EPUB = doc-epub
+@BUILD_EPUB_TRUE@STAMP_EPUB = doc-epub
+@BUILD_EPUB_FALSE@STAMP_INSTALL_EPUB = doc-install-epub
+@BUILD_EPUB_TRUE@STAMP_INSTALL_EPUB = doc-install-epub
+
+# Default creation and installation rules.
+# Point to best sub-rule for the requested documentation target and
+# create, and then install toplevel directory with standardized names
+# and layouts.
+
+# XML
+xmldir = "$(DESTDIR)@docdir@"
+
+# EPUB
+# Assumes ruby installed
+epubdir = "$(DESTDIR)@docdir@"
# Doxygen configuration
# Assumes doxygen, graphviz (with dot), pdflatex installed
doxygen_script = ${top_srcdir}/scripts/run_doxygen
doxygen_outdir = ${glibcxx_builddir}/doc/doxygen
+api_xml = ${doxygen_outdir}/xml/libstdc++-api-single.xml
doxygen_pdf = ${doxygen_outdir}/latex/refman.pdf
+api_pdf = ${doxygen_outdir}/pdf/libstdc++-api.pdf
# Docbook configuration.
# Assumes
# pdflatex
# docbook-style-xsl
# emacs-nxml-mode
-# xmlto passivetex
docbook_outdir = ${glibcxx_builddir}/doc/docbook
xml_dir = ${glibcxx_srcdir}/doc/xml
xml_sources_basic = \
${xml_dir}/manual/debug_mode.xml \
${xml_dir}/manual/debug.xml \
${xml_dir}/manual/diagnostics.xml \
+ ${xml_dir}/manual/documentation_hacking.xml \
${xml_dir}/manual/evolution.xml \
${xml_dir}/manual/extensions.xml \
${xml_dir}/manual/internals.xml \
${xml_dir}/manual/mt_allocator.xml \
${xml_dir}/manual/numerics.xml \
${xml_dir}/manual/parallel_mode.xml \
+ ${xml_dir}/manual/policy_data_structures.xml \
${xml_dir}/manual/prerequisites.xml \
${xml_dir}/manual/profile_mode.xml \
${xml_dir}/manual/shared_ptr.xml \
${xml_dir}/manual/spine.xml \
${xml_dir}/manual/status_cxx1998.xml \
- ${xml_dir}/manual/status_cxx200x.xml \
+ ${xml_dir}/manual/status_cxx2011.xml \
${xml_dir}/manual/status_cxxtr1.xml \
${xml_dir}/manual/status_cxxtr24733.xml \
${xml_dir}/manual/strings.xml \
${xml_dir}/manual/support.xml \
${xml_dir}/manual/test.xml \
+ ${xml_dir}/manual/test_policy_data_structures.xml \
${xml_dir}/manual/using.xml \
${xml_dir}/manual/using_exceptions.xml \
${xml_dir}/manual/utilities.xml \
${xml_dir}/manual/appendix_porting.xml
xml_sources_extra = \
- ${xml_dir}/gnu/fdl-1.2.xml \
- ${xml_dir}/gnu/gpl-2.0.xml \
+ ${xml_dir}/gnu/fdl-1.3.xml \
${xml_dir}/gnu/gpl-3.0.xml
xml_sources = \
${xml_sources_manual} \
${xml_sources_extra}
+xml_image_dir = ${xml_dir}/images
+xml_image_basic = \
+ ${xml_image_dir}/confdeps.png \
+ ${xml_image_dir}/pbds_balls_and_bins.png \
+ ${xml_image_dir}/pbds_container_tag_hierarchy.png \
+ ${xml_image_dir}/pbds_different_underlying_dss_1.png \
+ ${xml_image_dir}/pbds_different_underlying_dss_2.png \
+ ${xml_image_dir}/pbds_embedded_lists_1.png \
+ ${xml_image_dir}/pbds_embedded_lists_2.png \
+ ${xml_image_dir}/pbds_embedded_lists_3.png \
+ ${xml_image_dir}/pbds_exception_hierarchy.png \
+ ${xml_image_dir}/pbds_hash_policy_cd.png \
+ ${xml_image_dir}/pbds_hash_ranged_hash_range_hashing_fns.png \
+ ${xml_image_dir}/pbds_hash_range_hashing_seq_diagram2.png \
+ ${xml_image_dir}/pbds_hash_range_hashing_seq_diagram.png \
+ ${xml_image_dir}/pbds_insert_resize_sequence_diagram1.png \
+ ${xml_image_dir}/pbds_insert_resize_sequence_diagram2.png \
+ ${xml_image_dir}/pbds_insert_resize_sequence_diagram3.png \
+ ${xml_image_dir}/pbds_invalidation_guarantee_erase.png \
+ ${xml_image_dir}/pbds_invalidation_tag_hierarchy.png \
+ ${xml_image_dir}/pbds_list_update.png \
+ ${xml_image_dir}/pbds_node_invariants.png \
+ ${xml_image_dir}/pbds_pat_trie.png \
+ ${xml_image_dir}/pbds_point_iterator_hierarchy.png \
+ ${xml_image_dir}/pbds_point_iterators_range_ops_1.png \
+ ${xml_image_dir}/pbds_point_iterators_range_ops_2.png \
+ ${xml_image_dir}/pbds_priority_queue_different_underlying_dss.png \
+ ${xml_image_dir}/pbds_priority_queue_tag_hierarchy.png \
+ ${xml_image_dir}/pbds_rationale_null_node_updator.png \
+ ${xml_image_dir}/pbds_resize_policy_cd.png \
+ ${xml_image_dir}/pbds_restoring_node_invariants.png \
+ ${xml_image_dir}/pbds_simple_list.png \
+ ${xml_image_dir}/pbds_tree_node_invalidations.png \
+ ${xml_image_dir}/pbds_tree_node_invariants.png \
+ ${xml_image_dir}/pbds_tree_node_updator_policy_cd.png \
+ ${xml_image_dir}/pbds_trie_node_updator_policy_cd.png \
+ ${xml_image_dir}/pbds_update_seq_diagram.png
+
+xml_image_generated = \
+ ${xml_image_dir}/pbds_binary_priority_queue_int_push_pop.png \
+ ${xml_image_dir}/pbds_binary_priority_queue_int_push.png \
+ ${xml_image_dir}/pbds_ccgp_hash_int_subscript_insert.png \
+ ${xml_image_dir}/pbds_cc_hash_int_find.png \
+ ${xml_image_dir}/pbds_cc_hash_int_subscript_find.png \
+ ${xml_image_dir}/pbds_cc_hash_int_subscript_insert.png \
+ ${xml_image_dir}/pbds_gp_hash_int_find.png \
+ ${xml_image_dir}/pbds_gp_hash_int_subscript_find.png \
+ ${xml_image_dir}/pbds_gp_hash_int_subscript_insert.png \
+ ${xml_image_dir}/pbds_hash_int_erase_mem.png \
+ ${xml_image_dir}/pbds_hash_text_find.png \
+ ${xml_image_dir}/pbds_hash_zlob_int_find.png \
+ ${xml_image_dir}/pbds_multimap_text_find_large_s2p_hash.png \
+ ${xml_image_dir}/pbds_multimap_text_find_large_s2p_tree.png \
+ ${xml_image_dir}/pbds_multimap_text_find_small_s2p_hash.png \
+ ${xml_image_dir}/pbds_multimap_text_find_small_s2p_tree.png \
+ ${xml_image_dir}/pbds_multimap_text_insert_large_s2p_hash.png \
+ ${xml_image_dir}/pbds_multimap_text_insert_large_s2p_tree.png \
+ ${xml_image_dir}/pbds_multimap_text_insert_mem_large_s2p_hash.png \
+ ${xml_image_dir}/pbds_multimap_text_insert_mem_large_s2p_tree.png \
+ ${xml_image_dir}/pbds_multimap_text_insert_mem_small_s2p_hash.png \
+ ${xml_image_dir}/pbds_multimap_text_insert_mem_small_s2p_tree.png \
+ ${xml_image_dir}/pbds_multimap_text_insert_small_s2p_hash.png \
+ ${xml_image_dir}/pbds_multimap_text_insert_small_s2p_tree.png \
+ ${xml_image_dir}/pbds_pairing_priority_queue_text_modify_down_thin.png \
+ ${xml_image_dir}/pbds_pairing_priority_queue_text_modify_up_thin.png \
+ ${xml_image_dir}/pbds_pairing_priority_queue_text_push_pop.png \
+ ${xml_image_dir}/pbds_pairing_priority_queue_text_push.png \
+ ${xml_image_dir}/pbds_priority_queue_int_push_pop.png \
+ ${xml_image_dir}/pbds_priority_queue_int_push.png \
+ ${xml_image_dir}/pbds_priority_queue_text_join.png \
+ ${xml_image_dir}/pbds_priority_queue_text_modify_down.png \
+ ${xml_image_dir}/pbds_priority_queue_text_modify_up.png \
+ ${xml_image_dir}/pbds_priority_queue_text_pop_mem.png \
+ ${xml_image_dir}/pbds_priority_queue_text_push_pop.png \
+ ${xml_image_dir}/pbds_priority_queue_text_push.png \
+ ${xml_image_dir}/pbds_tree_int_find.png \
+ ${xml_image_dir}/pbds_tree_order_statistics.png \
+ ${xml_image_dir}/pbds_tree_split_join.png \
+ ${xml_image_dir}/pbds_tree_text_find.png \
+ ${xml_image_dir}/pbds_tree_text_insert_node.png \
+ ${xml_image_dir}/pbds_tree_text_insert_trie.png \
+ ${xml_image_dir}/pbds_tree_text_insert_vector.png \
+ ${xml_image_dir}/pbds_tree_text_lor_find.png
+
+xml_images = ${xml_image_basic} ${xml_image_generated}
+xml_extradir = ${glibcxx_srcdir}/doc/html/ext
+xml_extra = \
+ ${xml_extradir}/lwg-active.html \
+ ${xml_extradir}/lwg-closed.html \
+ ${xml_extradir}/lwg-defects.html
+
xml_noinst = \
${xml_dir}/book.txml \
${xml_dir}/chapter.txml \
- ${xml_dir}/class.txml
-
-XSLTPROC = xsltproc
-XSLTPROC_FLAGS = --nonet --xinclude
-XSL_STYLE_DIR = /usr/share/sgml/docbook/xsl-stylesheets
+ ${xml_dir}/class.txml \
+ ${xml_image_dir}/confdeps.dot \
+ ${xml_image_dir}/confdeps.pdf
+
+XSLT_FLAGS = --nonet --xinclude
+XSLT_PARAM = --param toc.section.depth 4
+#XSL_STYLE_DIR = /usr/share/xml/docbook/stylesheet/docbook-xsl-ns
+#XSL_STYLE_DIR = /usr/share/sgml/docbook/xsl-ns-stylesheets
XSL_FO_STYLE = $(XSL_STYLE_DIR)/fo/docbook.xsl
-XSL_HTML_STYLE = $(XSL_STYLE_DIR)/xhtml/chunk.xsl
-#XSL_HTML_SINGLE_STYLE = $(XSL_STYLE_DIR)/xhtml/onechunk.xsl
-XSL_HTML_SINGLE_STYLE = $(XSL_STYLE_DIR)/xhtml/docbook.xsl
+XSL_HTML_STYLE = $(XSL_STYLE_DIR)/xhtml-1_1/chunk.xsl
+XSL_HTML_SINGLE_STYLE = $(XSL_STYLE_DIR)/xhtml-1_1/docbook.xsl
+XSL_EPUB_STYLE = $(XSL_STYLE_DIR)/epub3/chunk.xsl
+LINT_FLAGS = --debug --xinclude --noent --noblanks --noout
+SCHEMA_FLAGS = http://www.docbook.org/xml/5.0/dtd/docbook.dtd
+#SCHEMA_FLAGS = --nonet /usr/share/xml/docbook5/schema/dtd/5.0/docbook.dtd
+XMLLINT_VALID_FLAGS = $(LINT_FLAGS) --dtdvalid $(SCHEMA_FLAGS)
+XMLLINT_FLAGS = --xinclude --nsclean --c14n --noent --noblanks --nocdata
+
+# XML, all one page
+# Some info on canonicalization
+# http://www.mail-archive.com/help-texinfo@gnu.org/msg00864.html
+manual_xml = ${docbook_outdir}/xml/libstdc++-manual-single.xml
+set_xml = ${docbook_outdir}/xml/libstdc++-set-single.xml
-# Validate existing XML structure.
-XMLLINT = xmllint
-#LINT_FLAGS = --debug --nonet --xinclude --nsclean --postvalid --nowarning
-#LINT_FLAGS = --noblanks --noout --xinclude --postvalid --noent
-LINT_FLAGS = --postvalid --debug --xinclude --noent --noblanks --nonet --noout
-DTD_FLAGS = --dtdvalid http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd
-XMLLINT_FLAGS = $(LINT_FLAGS) $(DTD_FLAGS)
-
-# PDF 1
-# fop
-FOP = fop
-FOP_FLAGS = -d -r
-
-# PDF 2
-# xmlto
-XML2PDF = xmlto
-XML2PDF_FLAGS = -v pdf --skip-validation -o pdf
-
-# PDF 3
-# xmlroff
-XMLROFF = xmlroff
-XMLROFF_FLAGS = --format=pdf --backend=cairo --warn=1 --debug=1 --continue
-
-# PDF 4
-# prince
-PRINCE = prince
-PRINCE_FLAGS = --log prince.log -o pdf/spine.pdf
-
-# PDF 5
-# dblatex
-DBLATEX_FLAGS = --dump --verbose --pdf -o ${docbook_outdir}/pdf/manual.pdf
+# HTML, all one page
+manual_html = ${docbook_outdir}/html/libstdc++-manual-single.html
+
+# PDF, via dblatex
+manual_pdf = ${docbook_outdir}/pdf/libstdc++-manual.pdf
+DBLATEX_FLAGS = --dump --verbose --pdf
+
+# TEXINFO, via docbook2X
+# NB: Both experimental and tempermental
+manual_texi = ${docbook_outdir}/texinfo/libstdc++-manual.texi
+manual_info = ${docbook_outdir}/texinfo/libstdc++-manual.info
+DB2TEXI_FLAGS = \
+ --encoding=utf-8//TRANSLIT \
+ --string-param output-file="libstdc++-manual" \
+ --string-param directory-category="GNU C++ Library" \
+ --string-param explicit-node-names=true
+
+
+# EPUB version 3
+# http://sourceforge.net/projects/docbook/files/epub3/
+# Can verify document with epubcheck
+manual_epub = ${docbook_outdir}/epub/libstdc++-manual.epub
# Performance doc and graph configuration.
# Assumes pychart, beautiful soup installed.
-# Generates the plots and graphs for performance testing.
-doc_performance_script = ${top_srcdir}/scripts/make_graphs.py
+# Generates the plots/graph imagery for performance testing.
+doc_performance_script = ${top_srcdir}/scripts/make_graph.py
# By adding these files here, automake will remove them for 'make clean'
-CLEANFILES = *.log
+CLEANFILES = *.log stamp*
all: all-am
.SUFFIXES:
ctags: CTAGS
CTAGS:
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
check-am: all-am
check: check-am
all-am: Makefile
-rm -f Makefile
distclean-am: clean-am distclean-generic
-dvi: dvi-am
-
dvi-am:
-html: html-am
-
html-am:
-info: info-am
-
info-am:
install-data-am:
-install-dvi: install-dvi-am
-
install-dvi-am:
install-exec-am:
-install-html: install-html-am
-
install-html-am:
-install-info: install-info-am
-
install-info-am:
-install-man:
-
-install-pdf: install-pdf-am
-
install-pdf-am:
-install-ps: install-ps-am
-
install-ps-am:
installcheck-am:
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-pdf: pdf-am
-
pdf-am:
-ps: ps-am
-
ps-am:
uninstall-am:
.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- clean-local distclean distclean-generic distclean-libtool \
- distdir dvi dvi-am html html-am info info-am install \
- install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- uninstall uninstall-am
+ clean-local distclean distclean-generic distclean-libtool dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+
+
+# Documentation primary rules.
+#
+# xml:
+# html:
+# pdf:
+# man:
+# info:
+# ps:
+# dvi:
+# epub:
+# install-xml:
+# install-html:
+# install-pdf:
+# install-man:
+# install-info:
+# install-ps:
+# install-dvi:
+# install-epub:
+xml: $(STAMP_XML)
+install-xml: $(STAMP_INSTALL_XML)
-# Documentation Overview
-#
-# There are two main source materials for libstdc++ documentation.
-# The first is the doxygen markup in libstdc++ sources. And the second
-# is the docbook markup in doc/xml/. A third and more obscure option
-# deals with charting performance tests.
+html: $(STAMP_HTML)
+install-html: $(STAMP_INSTALL_HTML)
-# Default, points to current best sub-rule that is the best conversion.
-# MAN
-doc-man: doc-man-doxygen
+man: $(STAMP_MAN)
+install-man: $(STAMP_INSTALL_MAN)
-# PDF
-doc-pdf: doc-pdf-docbook
+pdf: $(STAMP_PDF)
+install-pdf: $(STAMP_INSTALL_PDF)
-# HTML
-doc-html: doc-html-docbook
+epub: $(STAMP_EPUB)
+install-epub: $(STAMP_INSTALL_EPUB)
-doc-html-doxygen:
- -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
- builddir=`cd ..; ${PWD_COMMAND}`; \
- ${SHELL} ${doxygen_script} \
- --host_alias=${host_alias} --mode=html $${srcdir} $${builddir} YES)
+info:
+install-info:
-doc-man-doxygen:
- -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
- builddir=`cd ..; ${PWD_COMMAND}`; \
- ${SHELL} ${doxygen_script} \
- --host_alias=${host_alias} --mode=man $${srcdir} $${builddir} YES)
+ps:
+install-ps:
+
+dvi:
+install-dvi:
+stamp-xml: stamp-xml-single-docbook stamp-xml-single-doxygen
+ $(STAMP) stamp-xml
-doc-xml-doxygen:
+doc-xml: stamp-xml
+
+doc-install-xml: doc-xml
+ test -z ${xmldir} || $(mkinstalldirs) ${xmldir}
+ $(INSTALL_DATA) ${manual_xml} ${xmldir}
+ $(INSTALL_DATA) ${api_xml} ${xmldir}
+stamp-html: stamp-html-docbook-data stamp-html-doxygen
+ $(STAMP) stamp-html
+
+doc-html: stamp-html
+
+doc-install-html: doc-html
+ test -z ${htmldir} || $(mkinstalldirs) ${htmldir}
+ cp -r ${docbook_outdir}/html ${htmldir}/libstdc++-manual.html;
+ cp -r ${doxygen_outdir}/html ${htmldir}/libstdc++-api.html;
+stamp-pdf: stamp-pdf-docbook stamp-pdf-doxygen
+ $(STAMP) stamp-pdf
+
+doc-pdf: stamp-pdf
+
+doc-install-pdf: doc-pdf
+ test -z ${pdfdir} || $(mkinstalldirs) ${pdfdir}
+ $(INSTALL_DATA) ${docbook_outdir}/pdf/libstdc++-manual.pdf ${pdfdir}
+ $(INSTALL_DATA) ${doxygen_outdir}/pdf/libstdc++-api.pdf ${pdfdir}
+stamp-man: stamp-man-doxygen
+ $(STAMP) stamp-man
+
+doc-man: stamp-man
+
+doc-install-man: doc-man
+ test -z ${mandir} || $(mkinstalldirs) ${mandir}
+ cp -r ${doxygen_outdir}/man/man3 ${mandir}
+stamp-texinfo: stamp-texinfo-docbook
+ $(STAMP) stamp-texinfo
+
+stamp-info: stamp-info-docbook
+ $(STAMP) stamp-info
+
+doc-texinfo: stamp-texinfo
+
+doc-info: stamp-info
+
+doc-install-texinfo: doc-texinfo
+ test -z ${infodir} || $(mkinstalldirs) ${infodir}
+ $(INSTALL_DATA) ${manual_texi} ${infodir}
+
+doc-install-info: doc-info
+ test -z ${infodir} || $(mkinstalldirs) ${infodir}
+ $(INSTALL_DATA) ${manual_info} ${infodir}
+stamp-epub: stamp-epub-docbook
+ $(STAMP) stamp-epub
+
+doc-epub: stamp-epub
+
+doc-install-epub: doc-epub
+ test -z ${epubdir} || $(mkinstalldirs) ${epubdir}
+ $(INSTALL_DATA) ${manual_epub} ${epubdir}
+
+${doxygen_outdir}/xml:
+ mkdir -p ${doxygen_outdir}/xml
+
+${doxygen_outdir}/html:
+ mkdir -p ${doxygen_outdir}/html
+
+${doxygen_outdir}/latex:
+ mkdir -p ${doxygen_outdir}/latex
+
+${doxygen_outdir}/pdf:
+ mkdir -p ${doxygen_outdir}/pdf
+
+${doxygen_outdir}/man:
+ mkdir -p ${doxygen_outdir}/man
+
+stamp-xml-doxygen: ${doxygen_outdir}/xml
-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
builddir=`cd ..; ${PWD_COMMAND}`; \
${SHELL} ${doxygen_script} \
--host_alias=${host_alias} --mode=xml $${srcdir} $${builddir} NO)
+ $(STAMP) stamp-xml-doxygen
-doc-xml-single-doxygen:
+stamp-xml-single-doxygen: stamp-xml-doxygen
@echo "Generating doxygen xml single file..."
$(XSLTPROC) ${doxygen_outdir}/xml/combine.xslt \
- ${doxygen_outdir}/xml/index.xml > ${doxygen_outdir}/xml/api-spine.xml;
+ ${doxygen_outdir}/xml/index.xml > ${api_xml};
+ $(STAMP) stamp-xml-single-doxygen
-doc-latex-doxygen:
+stamp-html-doxygen: ${doxygen_outdir}/html
+ -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+ builddir=`cd ..; ${PWD_COMMAND}`; \
+ ${SHELL} ${doxygen_script} \
+ --host_alias=${host_alias} --mode=html $${srcdir} $${builddir} YES)
+ $(STAMP) stamp-html-doxygen
+
+stamp-latex-doxygen: ${doxygen_outdir}/latex
-(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
builddir=`cd ..; ${PWD_COMMAND}`; \
${SHELL} ${doxygen_script} \
--host_alias=${host_alias} --mode=latex $${srcdir} $${builddir} NO)
+ $(STAMP) stamp-latex-doxygen
-# Chance of loooooonnggg creation time on this rule.
-doc-pdf-doxygen: stamp-latex-doxygen
+# Chance of loooooonnggg creation time on this rule. Iff this fails,
+# look at refman.log and see if TeX's memory is exhausted. Symptoms
+# include asking a wizard to enlarge capacity. If this is the case,
+# find texmf.cnf and add a zero for pool_size, string_vacancies,
+# max_strings, and pool_free values.
+stamp-pdf-doxygen: stamp-latex-doxygen ${doxygen_outdir}/pdf
-(cd ${doxygen_outdir}/latex && $(MAKE) -i pdf;)
echo "Generating doxygen pdf file...";
if [ -f ${doxygen_pdf} ]; then \
- echo "... ${doxygen_pdf}"; \
+ mv ${doxygen_pdf} ${api_pdf} ; \
+ echo ":: PDF file is ${api_pdf}"; \
else \
echo "... error"; \
exit 12; \
fi
-
-stamp-pdf-doxygen:
- @if [ ! -f stamp-pdf-doxygen ]; then \
- $(MAKE) doc-pdf-doxygen; \
- fi
$(STAMP) stamp-pdf-doxygen
-stamp-xml-doxygen:
- @if [ ! -f stamp-xml-doxygen ]; then \
- $(MAKE) doc-xml-doxygen; \
- $(MAKE) doc-xml-single-doxygen; \
- fi
- $(STAMP) stamp-xml-doxygen
+stamp-man-doxygen: ${doxygen_outdir}/man
+ -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+ builddir=`cd ..; ${PWD_COMMAND}`; \
+ ${SHELL} ${doxygen_script} \
+ --host_alias=${host_alias} --mode=man $${srcdir} $${builddir} YES)
+ $(STAMP) stamp-man-doxygen
-stamp-latex-doxygen:
- @if [ ! -f stamp-latex-doxygen ]; then \
- $(MAKE) doc-latex-doxygen; \
- fi
- $(STAMP) stamp-latex-doxygen
+doc-xml-doxygen: stamp-xml-doxygen
+doc-xml-single-doxygen: stamp-xml-single-doxygen
+doc-html-doxygen: stamp-html-doxygen
+doc-latex-doxygen: stamp-latex-doxygen
+doc-pdf-doxygen: stamp-pdf-doxygen
+doc-man-doxygen: stamp-man-doxygen
+
+${docbook_outdir}/epub:
+ mkdir -p ${docbook_outdir}/epub
+ mkdir -p ${docbook_outdir}/epub/OEBPS/images
+
+${docbook_outdir}/fo:
+ mkdir -p ${docbook_outdir}/fo
${docbook_outdir}/html:
mkdir -p ${docbook_outdir}/html
+ mkdir -p ${docbook_outdir}/html/ext
+ mkdir -p ${docbook_outdir}/html/images
+ mkdir -p ${docbook_outdir}/html/manual
${docbook_outdir}/pdf:
mkdir -p ${docbook_outdir}/pdf
-${docbook_outdir}/fo:
- mkdir -p ${docbook_outdir}/fo
+${docbook_outdir}/texinfo:
+ mkdir -p ${docbook_outdir}/texinfo
${docbook_outdir}/xml:
mkdir -p ${docbook_outdir}/xml
-doc-xml-validate-docbook: $(xml_sources)
+doc-xml-validate-docbook: $(xml_sources) $(xml_images)
@echo "Generating XML validation log..."
- $(XMLLINT) $(XMLLINT_FLAGS) ${top_srcdir}/doc/xml/spine.xml
-
-doc-xml-single-docbook: $(xml_sources) ${docbook_outdir}/xml
+ $(XMLLINT) $(XMLLINT_VALID_FLAGS) ${top_srcdir}/doc/xml/spine.xml
+stamp-xml-single-docbook: $(xml_sources) ${docbook_outdir}/xml
@echo "Generating XML single..."
- $(XMLLINT) --xinclude --noent --noblanks \
- -o ${docbook_outdir}/xml/spine-single.xml \
- ${top_srcdir}/doc/xml/spine.xml
+ $(XMLLINT) $(XMLLINT_FLAGS) \
+ ${top_srcdir}/doc/xml/manual/spine.xml > ${manual_xml};
+ $(XMLLINT) $(XMLLINT_FLAGS) \
+ ${top_srcdir}/doc/xml/spine.xml > ${set_xml};
+ $(STAMP) stamp-xml-single-docbook
+
+doc-xml-single-docbook: stamp-xml-single-docbook
+
+# HTML support files
+stamp-html-docbook-images: stamp-html-docbook $(xml_images)
+ $(INSTALL_DATA) $(xml_images) ${docbook_outdir}/html/images
+ $(STAMP) stamp-html-docbook-images
+
+stamp-html-docbook-lwg: stamp-html-docbook $(xml_extra)
+ $(INSTALL_DATA) $(xml_extra) ${docbook_outdir}/html/ext
+ $(STAMP) stamp-html-docbook-lwg
+
+stamp-html-docbook-data: stamp-html-docbook-images stamp-html-docbook-lwg
+ $(STAMP) stamp-html-docbook-data
# HTML, index plus chapters
-doc-html-docbook: $(xml_sources) ${docbook_outdir}/html
+stamp-html-docbook: $(xml_sources) ${docbook_outdir}/html
@echo "Generating html files..."
- $(XSLTPROC) $(XSLTPROC_FLAGS) -o ${docbook_outdir}/html/ \
+ $(XSLTPROC) $(XSLT_PARAM) $(XSLT_FLAGS) -o ${docbook_outdir}/html/ \
$(XSL_HTML_STYLE) ${top_srcdir}/doc/xml/spine.xml
+ $(STAMP) stamp-html-docbook
-# HTML, all one page
-doc-html-single-docbook: $(xml_sources) ${docbook_outdir}/html
+doc-html-docbook: stamp-html-docbook-data
+stamp-html-single-docbook: $(xml_sources) ${docbook_outdir}/html
@echo "Generating html single file..."
- $(XSLTPROC) $(XSLTPROC_FLAGS) -o ${docbook_outdir}/html/ \
+ $(XSLTPROC) $(XSLT_PARAM) $(XSLT_FLAGS) -o ${manual_html} \
$(XSL_HTML_SINGLE_STYLE) ${top_srcdir}/doc/xml/spine.xml
+ $(STAMP) stamp-html-single-docbook
+
+doc-html-single-docbook: stamp-html-single-docbook
# FO
-doc-fo-docbook: $(xml_sources) ${docbook_outdir}/fo
+stamp-fo-docbook: $(xml_sources) ${docbook_outdir}/fo
@echo "Generating FO files..."
- $(XSLTPROC) $(XSLTPROC_FLAGS) -o ${docbook_outdir}/fo/spine.fo \
+ $(XSLTPROC) $(XSLT_FLAGS) -o ${docbook_outdir}/fo/spine.fo \
$(XSL_FO_STYLE) ${top_srcdir}/doc/xml/spine.xml
-doc-pdf-fop-xml-docbook: $(xml_sources) ${glibcxx_builddir}/doc/pdf
- @echo "Generating pdf fop files from xml..."
- $(FOP) $(FOP_FLAGS) -xml ${top_srcdir}/doc/xml/spine.xml \
- -xsl $(XSL_FO_STYLE) -pdf ${docbook_outdir}/pdf/spine.pdf
-
-doc-pdf-fop-fo-docbook: $(xml_sources) ${glibcxx_builddir}/doc/pdf doc-fo
- @echo "Generating pdf fop files from fo..."
- $(FOP) $(FOP_FLAGS) -fo ${docbook_outdir}/fo/spine.fo \
- -pdf ${docbook_outdir}/pdf/spine.pdf
-doc-pdf-xmlto-docbook: $(xml_sources) ${docbook_outdir}/pdf
- @echo "Generating pdf xmlto files..."
- $(XML2PDF) $(XML2PDF_FLAGS) ${top_srcdir}/doc/xml/spine.xml
-doc-pdf-xmlroff-docbook: $(xml_sources) doc-fo
- @echo "Generating pdf xmlroff files..."
- $(XMLROFF) $(XMLROFF_FLAGS) ${docbook_outdir}/fo/spine.fo
-doc-pdf-prince-docbook: $(xml_sources) ${docbook_outdir}/pdf
- @echo "Generating pdf prince files..."
- $(PRINCE) $(PRINCE_FLAGS) ${top_srcdir}/xml/spine.xml
-doc-pdf-dblatex-docbook: $(xml_sources) ${docbook_outdir}/pdf
- @echo "Generating pdf dblatex files..."
- dblatex $(DBLATEX_FLAGS) ${top_srcdir}/doc/xml/spine.xml
+ $(STAMP) stamp-fo-docbook
-doc-pdf-docbook: doc-pdf-dblatex-docbook
-doc-html-performance:
+doc-fo-docbook: stamp-fo-docbook
+stamp-pdf-docbook: $(xml_sources) ${docbook_outdir}/pdf
+ @echo "Generating pdf dblatex files..."
+ dblatex $(DBLATEX_FLAGS) \
+ -o ${manual_pdf} ${top_srcdir}/doc/xml/spine.xml
+ $(STAMP) stamp-pdf-docbook
+
+doc-pdf-docbook: stamp-pdf-docbook
+
+stamp-texinfo-docbook: stamp-xml-single-docbook ${docbook_outdir}/texinfo
+ @echo "Generating texinfo files..."
+ db2x_docbook2texi $(DB2TEXI_FLAGS) ${set_xml}
+ mv libstdc++-manual.texi ${manual_texi}
+ $(STAMP) stamp-texinfo-docbook
+
+stamp-info-docbook: stamp-texinfo-docbook
+ @echo "Generating info files..."
+ $(MAKEINFO) $(MAKEINFOFLAGS) ${manual_texi}
+ $(STAMP) stamp-info-docbook
+
+doc-texinfo-docbook: stamp-texinfo-docbook
+
+doc-info-docbook: stamp-info-docbook
+stamp-epub-docbook: stamp-xml-single-docbook ${docbook_outdir}/epub
+ @echo "Generating epub files..."
+ if [ ! -d "${docbook_outdir}/images" ]; then \
+ $(LN_S) ${top_srcdir}/doc/xml/images ${docbook_outdir}/; \
+ fi
+ $(XSLTPROC) $(XSLT_PARAM) $(XSLT_FLAGS) \
+ --stringparam base.dir "${docbook_outdir}/epub/OEBPS/" \
+ $(XSL_EPUB_STYLE) ${top_srcdir}/doc/xml/spine.xml
+ $(INSTALL_DATA) $(xml_images) ${docbook_outdir}/epub/OEBPS/images
+ zip -X0 ${manual_epub} ${docbook_outdir}/epub/mimetype
+ zip -r -X9 ${manual_epub} ${docbook_outdir}/epub/META-INF ${docbook_outdir}/epub/OEBPS
+ $(STAMP) stamp-epub-docbook
+
+doc-epub-docbook: stamp-epub-docbook
+doc-svg-performance: ${docbook_outdir}/xml
-@(chmod + ${doc_performance_script}; \
- ${doc_performance_script} ${top_srcdir} \
+ ${doc_performance_script} \
+ ${top_srcdir}/testsuite/data/make_graph_test_infos.xml \
${glibcxx_builddir}/testsuite \
- ${top_srcdir}/testsuite/data/make_graph_htmls.xml \
- ${top_srcdir}/testsuite/data/make_graph_test_infos.xml local g++)
+ ${glibcxx_builddir}/doc/docbook/xml/images)
.PHONY: doc-doxygen-html doc-doxygen-man doc-performance
# To remove directories.
clean-local:
- rm -rf man html pdf fo xml doxygen docbook stamp*
+ rm -rf man html pdf fo xml doxygen docbook ./libstdc++-* db2t*
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
OSDN Git Service
