-dnl aclocal.m4 generated automatically by aclocal 1.4-p6
-
-dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl
-dnl Initialize basic configure bits, set toplevel_srcdir for Makefiles.
-dnl
-dnl GLIBCPP_TOPREL_CONFIGURE
-AC_DEFUN(GLIBCPP_TOPREL_CONFIGURE, [
- dnl Default to --enable-multilib (this is also passed by default
- dnl from the ubercommon-top-level configure)
- AC_ARG_ENABLE(multilib,
- [ --enable-multilib build hella library versions (default)],
- [case "${enableval}" in
- yes) multilib=yes ;;
- no) multilib=no ;;
- *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
- # When building with srcdir == objdir, links to the source files will
- # be created in directories within the target_subdir. We have to
- # adjust toplevel_srcdir accordingly, so that configure finds
- # install-sh and other auxiliary files that live in the top-level
- # source directory.
- if test "${srcdir}" = "."; then
- if test -z "${with_target_subdir}"; then
- toprel=".."
- else
- if test "${with_target_subdir}" != "."; then
- toprel="${with_multisrctop}../.."
- else
- toprel="${with_multisrctop}.."
- fi
- fi
- else
- toprel=".."
- fi
- AC_CONFIG_AUX_DIR(${srcdir}/$toprel)
- toplevel_srcdir=\${top_srcdir}/$toprel
- AC_SUBST(toplevel_srcdir)
-])
-
-dnl
-dnl Initialize the rest of the library configury.
-dnl
-dnl GLIBCPP_CONFIGURE
-AC_DEFUN(GLIBCPP_CONFIGURE, [
- # Export build and source directories.
- # These need to be absolute paths, yet at the same time need to
- # canonicalize only relative paths, because then amd will not unmount
- # drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd.
- glibcpp_builddir=`${PWDCMD-pwd}`
- case $srcdir in
- [\\/$]* | ?:[\\/]*) glibcpp_srcdir=${srcdir} ;;
- *) glibcpp_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;;
- esac
- AC_SUBST(glibcpp_builddir)
- AC_SUBST(glibcpp_srcdir)
-
- dnl This is here just to satisfy automake.
- ifelse(not,equal,[AC_CONFIG_AUX_DIR(..)])
-
- AC_PROG_AWK
- # Will set LN_S to either 'ln -s' or 'ln'. With autoconf 2.5x, can also
- # be 'cp -p' if linking isn't available. Uncomment the next line to
- # force a particular method.
- #ac_cv_prog_LN_S='cp -p'
- AC_PROG_LN_S
-
- # We use these options to decide which functions to include.
- AC_ARG_WITH(target-subdir,
- [ --with-target-subdir=SUBDIR
- configuring in a subdirectory])
- AC_ARG_WITH(cross-host,
- [ --with-cross-host=HOST configuring with a cross compiler])
-
- glibcpp_basedir=$srcdir/$toprel/$1/libstdc++-v3
- AC_SUBST(glibcpp_basedir)
-
- # Never versions of autoconf add an underscore to these functions.
- # Prevent future problems ...
- ifdef([AC_PROG_CC_G],[],[define([AC_PROG_CC_G],defn([_AC_PROG_CC_G]))])
- ifdef([AC_PROG_CC_GNU],[],[define([AC_PROG_CC_GNU],defn([_AC_PROG_CC_GNU]))])
- ifdef([AC_PROG_CXX_G],[],[define([AC_PROG_CXX_G],defn([_AC_PROG_CXX_G]))])
- ifdef([AC_PROG_CXX_GNU],[],[define([AC_PROG_CXX_GNU],defn([_AC_PROG_CXX_GNU]))])
-
- # AC_PROG_CC
- # FIXME: We temporarily define our own version of AC_PROG_CC. This is
- # copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
- # are probably using a cross compiler, which will not be able to fully
- # link an executable. This is addressed in later versions of autoconf.
-
- AC_DEFUN(LIB_AC_PROG_CC,
- [AC_BEFORE([$0], [AC_PROG_CPP])dnl
- dnl Fool anybody using AC_PROG_CC.
- AC_PROVIDE([AC_PROG_CC])
- AC_CHECK_PROG(CC, gcc, gcc)
- if test -z "$CC"; then
- AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
- test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
- fi
-
- AC_PROG_CC_GNU
-
- if test $ac_cv_prog_gcc = yes; then
- GCC=yes
- dnl Check whether -g works, even if CFLAGS is set, in case the package
- dnl plays around with CFLAGS (such as to build both debugging and
- dnl normal versions of a library), tasteless as that idea is.
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- AC_PROG_CC_G
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-O2"
- fi
- else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-g"
- fi
- ])
-
- LIB_AC_PROG_CC
-
- # Likewise for AC_PROG_CXX. We can't just call it directly because g++
- # will try to link in libstdc++.
- AC_DEFUN(LIB_AC_PROG_CXX,
- [AC_BEFORE([$0], [AC_PROG_CXXCPP])dnl
- dnl Fool anybody using AC_PROG_CXX.
- AC_PROVIDE([AC_PROG_CXX])
- # Use glibcpp_CXX so that we do not cause CXX to be cached with the
- # flags that come in CXX while configuring libstdc++. They're different
- # from those used for all other target libraries. If CXX is set in
- # the environment, respect that here.
- glibcpp_CXX=$CXX
- AC_CHECK_PROGS(glibcpp_CXX, $CCC c++ g++ gcc CC cxx cc++, gcc)
- AC_SUBST(glibcpp_CXX)
- CXX=$glibcpp_CXX
- test -z "$glibcpp_CXX" && AC_MSG_ERROR([no acceptable c++ found in \$PATH])
-
- AC_PROG_CXX_GNU
-
- if test $ac_cv_prog_gxx = yes; then
- GXX=yes
- dnl Check whether -g works, even if CXXFLAGS is set, in case the package
- dnl plays around with CXXFLAGS (such as to build both debugging and
- dnl normal versions of a library), tasteless as that idea is.
- ac_test_CXXFLAGS="${CXXFLAGS+set}"
- ac_save_CXXFLAGS="$CXXFLAGS"
- CXXFLAGS=
- AC_PROG_CXX_G
- if test "$ac_test_CXXFLAGS" = set; then
- CXXFLAGS="$ac_save_CXXFLAGS"
- elif test $ac_cv_prog_cxx_g = yes; then
- CXXFLAGS="-g -O2"
- else
- CXXFLAGS="-O2"
- fi
- else
- GXX=
- test "${CXXFLAGS+set}" = set || CXXFLAGS="-g"
- fi
- ])
-
- LIB_AC_PROG_CXX
-
- # For directory versioning (e.g., headers) and other variables.
- AC_MSG_CHECKING([for GCC version number])
- gcc_version=`$glibcpp_CXX -dumpversion`
- AC_MSG_RESULT($gcc_version)
-
- # For some reason, gettext needs this.
- AC_ISC_POSIX
-
- AC_CHECK_TOOL(AS, as)
- AC_CHECK_TOOL(AR, ar)
- AC_CHECK_TOOL(RANLIB, ranlib, ranlib-not-found-in-path-error)
- AC_PROG_INSTALL
-
- AM_MAINTAINER_MODE
-
- # We need AC_EXEEXT to keep automake happy in cygnus mode. However,
- # at least currently, we never actually build a program, so we never
- # need to use $(EXEEXT). Moreover, the test for EXEEXT normally
- # fails, because we are probably configuring with a cross compiler
- # which can't create executables. So we include AC_EXEEXT to keep
- # automake happy, but we don't execute it, since we don't care about
- # the result.
- if false; then
- # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
- # to nothing, so nothing would remain between `then' and `fi' if it
- # were not for the `:' below.
- :
- AC_EXEEXT
- fi
-
- case [$]{glibcpp_basedir} in
- /* | [A-Za-z]:[\\/]*) libgcj_flagbasedir=[$]{glibcpp_basedir} ;;
- *) glibcpp_flagbasedir='[$](top_builddir)/'[$]{glibcpp_basedir} ;;
- esac
-
- # Find platform-specific directories containing configuration info. In
- # addition to possibly modifying the same flags, it also sets up symlinks.
- GLIBCPP_CHECK_TARGET
-])
-
-
-dnl
-dnl Check to see if g++ can compile this library, and if so, if any version-
-dnl specific precautions need to be taken.
-dnl
-dnl GLIBCPP_CHECK_COMPILER_VERSION
-AC_DEFUN(GLIBCPP_CHECK_COMPILER_VERSION, [
-if test ! -f stamp-sanity-compiler; then
- AC_MSG_CHECKING([for g++ that will successfully compile libstdc++-v3])
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- AC_TRY_COMPILE(, [
- #if __GNUC__ < 3
- not_ok
- #endif
- ], gpp_satisfactory=yes, AC_MSG_ERROR([please upgrade to GCC 3.0 or above]))
- AC_LANG_RESTORE
- AC_MSG_RESULT($gpp_satisfactory)
- touch stamp-sanity-compiler
-fi
-])
-
-
-dnl
-dnl Tests for newer compiler features, or features that are present in newer
-dnl compiler versions but not older compiler versions still in use, should
-dnl be placed here.
-dnl
-dnl Define WERROR='-Werror' if requested and possible; g++'s that lack the
-dnl new inlining code or the new system_header pragma will die on -Werror.
-dnl Leave it out by default and use maint-mode to use it.
-dnl
-dnl Define SECTION_FLAGS='-ffunction-sections -fdata-sections' if
-dnl compiler supports it and the user has not requested debug mode.
-dnl
-dnl GLIBCPP_CHECK_COMPILER_FEATURES
-AC_DEFUN(GLIBCPP_CHECK_COMPILER_FEATURES, [
- # All these tests are for C++; save the language and the compiler flags.
- # The CXXFLAGS thing is suspicious, but based on similar bits previously
- # found in GLIBCPP_CONFIGURE.
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- ac_test_CXXFLAGS="${CXXFLAGS+set}"
- ac_save_CXXFLAGS="$CXXFLAGS"
-
- # Check for maintainer-mode bits.
- if test x"$USE_MAINTAINER_MODE" = xno; then
- WERROR=''
- else
- WERROR='-Werror'
- fi
-
- # Check for -ffunction-sections -fdata-sections
- AC_MSG_CHECKING([for g++ that supports -ffunction-sections -fdata-sections])
- CXXFLAGS='-Werror -ffunction-sections -fdata-sections'
- AC_TRY_COMPILE(, [int foo;
- ], [ac_fdsections=yes], [ac_fdsections=no])
- if test "$ac_test_CXXFLAGS" = set; then
- CXXFLAGS="$ac_save_CXXFLAGS"
- else
- # this is the suspicious part
- CXXFLAGS=''
- fi
- if test x"$ac_fdsections" = x"yes"; then
- SECTION_FLAGS='-ffunction-sections -fdata-sections'
- fi
- AC_MSG_RESULT($ac_fdsections)
-
- AC_LANG_RESTORE
- AC_SUBST(WERROR)
- AC_SUBST(SECTION_FLAGS)
-])
-
-
-dnl
-dnl If GNU ld is in use, check to see if tricky linker opts can be used. If
-dnl the native linker is in use, all variables will be defined to something
-dnl safe (like an empty string).
-dnl
-dnl Define SECTION_LDFLAGS='-Wl,--gc-sections' if possible.
-dnl Define OPT_LDFLAGS='-Wl,-O1' if possible.
-dnl Define LD, with_gnu_ld, and (possibly) glibcpp_gnu_ld_version as
-dnl side-effects of testing.
-dnl
-dnl GLIBCPP_CHECK_LINKER_FEATURES
-AC_DEFUN(GLIBCPP_CHECK_LINKER_FEATURES, [
- # If we're not using GNU ld, then there's no point in even trying these
- # tests. Check for that first. We should have already tested for gld
- # by now (in libtool), but require it now just to be safe...
- test -z "$SECTION_LDFLAGS" && SECTION_LDFLAGS=''
- test -z "$OPT_LDFLAGS" && OPT_LDFLAGS=''
- AC_REQUIRE([AC_PROG_LD])
-
- # The name set by libtool depends on the version of libtool. Shame on us
- # for depending on an impl detail, but c'est la vie. Older versions used
- # ac_cv_prog_gnu_ld, but now it's lt_cv_prog_gnu_ld, and is copied back on
- # top of with_gnu_ld (which is also set by --with-gnu-ld, so that actually
- # makes sense). We'll test with_gnu_ld everywhere else, so if that isn't
- # set (hence we're using an older libtool), then set it.
- if test x${with_gnu_ld+set} != xset; then
- if test x${ac_cv_prog_gnu_ld+set} != xset; then
- # We got through "ac_require(ac_prog_ld)" and still not set? Huh?
- with_gnu_ld=no
- else
- with_gnu_ld=$ac_cv_prog_gnu_ld
- fi
- fi
-
- # Start by getting the version number. I think the libtool test already
- # does some of this, but throws away the result.
- changequote(,)
- ldver=`$LD --version 2>/dev/null | head -1 | \
- sed -e 's/GNU ld version \([0-9.][0-9.]*\).*/\1/'`
- changequote([,])
- glibcpp_gnu_ld_version=`echo $ldver | \
- $AWK -F. '{ if (NF<3) [$]3=0; print ([$]1*100+[$]2)*100+[$]3 }'`
-
- # Set --gc-sections.
- if test "$with_gnu_ld" = "notbroken"; then
- # GNU ld it is! Joy and bunny rabbits!
-
- # All these tests are for C++; save the language and the compiler flags.
- # Need to do this so that g++ won't try to link in libstdc++
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS='-x c++ -Wl,--gc-sections'
-
- # Check for -Wl,--gc-sections
- # XXX This test is broken at the moment, as symbols required for
- # linking are now in libsupc++ (not built yet.....). In addition,
- # this test has cored on solaris in the past. In addition,
- # --gc-sections doesn't really work at the moment (keeps on discarding
- # used sections, first .eh_frame and now some of the glibc sections for
- # iconv). Bzzzzt. Thanks for playing, maybe next time.
- AC_MSG_CHECKING([for ld that supports -Wl,--gc-sections])
- AC_TRY_RUN([
- int main(void)
- {
- try { throw 1; }
- catch (...) { };
- return 0;
- }
- ], [ac_sectionLDflags=yes],[ac_sectionLDflags=no], [ac_sectionLDflags=yes])
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- else
- # this is the suspicious part
- CFLAGS=''
- fi
- if test "$ac_sectionLDflags" = "yes"; then
- SECTION_LDFLAGS="-Wl,--gc-sections $SECTION_LDFLAGS"
- fi
- AC_MSG_RESULT($ac_sectionLDflags)
- fi
-
- # Set linker optimization flags.
- if test x"$with_gnu_ld" = x"yes"; then
- OPT_LDFLAGS="-Wl,-O1 $OPT_LDFLAGS"
- fi
-
- AC_SUBST(SECTION_LDFLAGS)
- AC_SUBST(OPT_LDFLAGS)
-])
-
-
-dnl
-dnl Check to see if the (math function) argument passed is
-dnl declared when using the c++ compiler
-dnl ASSUMES argument is a math function with ONE parameter
-dnl
-dnl GLIBCPP_CHECK_MATH_DECL_1
-AC_DEFUN(GLIBCPP_CHECK_MATH_DECL_1, [
- AC_MSG_CHECKING([for $1 declaration])
- if test x${glibcpp_cv_func_$1_use+set} != xset; then
- AC_CACHE_VAL(glibcpp_cv_func_$1_use, [
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- AC_TRY_COMPILE([#include <math.h>
- #ifdef HAVE_IEEEFP_H
- #include <ieeefp.h>
- #endif
- ],
- [ $1(0);],
- [glibcpp_cv_func_$1_use=yes], [glibcpp_cv_func_$1_use=no])
- AC_LANG_RESTORE
- ])
- fi
- AC_MSG_RESULT($glibcpp_cv_func_$1_use)
-])
-
-dnl
-dnl Check to see if the (math function) argument passed is
-dnl 1) declared when using the c++ compiler
-dnl 2) has "C" linkage
-dnl 3) if not, see if 1) and 2) for argument prepended with '_'
-dnl
-dnl Define HAVE_CARGF etc if "cargf" is declared and links
-dnl
-dnl argument 1 is name of function to check
-dnl
-dnl ASSUMES argument is a math function with ONE parameter
-dnl
-dnl GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1
-AC_DEFUN(GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1, [
- GLIBCPP_CHECK_MATH_DECL_1($1)
- if test x$glibcpp_cv_func_$1_use = x"yes"; then
- AC_CHECK_FUNCS($1)
- else
- GLIBCPP_CHECK_MATH_DECL_1(_$1)
- if test x$glibcpp_cv_func__$1_use = x"yes"; then
- AC_CHECK_FUNCS(_$1)
- fi
- fi
-])
-
-
-dnl
-dnl Like GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1, but does a bunch of
-dnl of functions at once. It's an all-or-nothing check -- either
-dnl HAVE_XYZ is defined for each of the functions, or for none of them.
-dnl Doing it this way saves significant configure time.
-AC_DEFUN(GLIBCPP_CHECK_MATH_DECLS_AND_LINKAGES_1, [
- AC_MSG_CHECKING([for $1 functions])
- AC_CACHE_VAL(glibcpp_cv_func_$2_use, [
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- AC_TRY_COMPILE([#include <math.h>],
- [ `for x in $3; do echo "$x (0);"; done` ],
- [glibcpp_cv_func_$2_use=yes],
- [glibcpp_cv_func_$2_use=no])
- AC_LANG_RESTORE])
- AC_MSG_RESULT($glibcpp_cv_func_$2_use)
- if test x$glibcpp_cv_func_$2_use = x"yes"; then
- AC_CHECK_FUNCS($3)
- fi
-])
-
-dnl
-dnl Check to see if the (math function) argument passed is
-dnl declared when using the c++ compiler
-dnl ASSUMES argument is a math function with TWO parameters
-dnl
-dnl GLIBCPP_CHECK_MATH_DECL_2
-AC_DEFUN(GLIBCPP_CHECK_MATH_DECL_2, [
- AC_MSG_CHECKING([for $1 declaration])
- if test x${glibcpp_cv_func_$1_use+set} != xset; then
- AC_CACHE_VAL(glibcpp_cv_func_$1_use, [
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- AC_TRY_COMPILE([#include <math.h>],
- [ $1(0, 0);],
- [glibcpp_cv_func_$1_use=yes], [glibcpp_cv_func_$1_use=no])
- AC_LANG_RESTORE
- ])
- fi
- AC_MSG_RESULT($glibcpp_cv_func_$1_use)
-])
-
-dnl
-dnl Check to see if the (math function) argument passed is
-dnl 1) declared when using the c++ compiler
-dnl 2) has "C" linkage
-dnl
-dnl Define HAVE_CARGF etc if "cargf" is declared and links
-dnl
-dnl argument 1 is name of function to check
-dnl
-dnl ASSUMES argument is a math function with TWO parameters
-dnl
-dnl GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2
-AC_DEFUN(GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2, [
- GLIBCPP_CHECK_MATH_DECL_2($1)
- if test x$glibcpp_cv_func_$1_use = x"yes"; then
- AC_CHECK_FUNCS($1)
- else
- GLIBCPP_CHECK_MATH_DECL_2(_$1)
- if test x$glibcpp_cv_func__$1_use = x"yes"; then
- AC_CHECK_FUNCS(_$1)
- fi
- fi
-])
-
-
-dnl
-dnl Check to see if the (math function) argument passed is
-dnl declared when using the c++ compiler
-dnl ASSUMES argument is a math function with THREE parameters
-dnl
-dnl GLIBCPP_CHECK_MATH_DECL_3
-AC_DEFUN(GLIBCPP_CHECK_MATH_DECL_3, [
- AC_MSG_CHECKING([for $1 declaration])
- if test x${glibcpp_cv_func_$1_use+set} != xset; then
- AC_CACHE_VAL(glibcpp_cv_func_$1_use, [
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- AC_TRY_COMPILE([#include <math.h>],
- [ $1(0, 0, 0);],
- [glibcpp_cv_func_$1_use=yes], [glibcpp_cv_func_$1_use=no])
- AC_LANG_RESTORE
- ])
- fi
- AC_MSG_RESULT($glibcpp_cv_func_$1_use)
-])
-
-dnl
-dnl Check to see if the (math function) argument passed is
-dnl 1) declared when using the c++ compiler
-dnl 2) has "C" linkage
-dnl
-dnl Define HAVE_CARGF etc if "cargf" is declared and links
-dnl
-dnl argument 1 is name of function to check
-dnl
-dnl ASSUMES argument is a math function with THREE parameters
-dnl
-dnl GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_3
-AC_DEFUN(GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_3, [
- GLIBCPP_CHECK_MATH_DECL_3($1)
- if test x$glibcpp_cv_func_$1_use = x"yes"; then
- AC_CHECK_FUNCS($1)
- else
- GLIBCPP_CHECK_MATH_DECL_3(_$1)
- if test x$glibcpp_cv_func__$1_use = x"yes"; then
- AC_CHECK_FUNCS(_$1)
- fi
- fi
-])
-
-
-dnl
-dnl Check to see if the (stdlib function) argument passed is
-dnl 1) declared when using the c++ compiler
-dnl 2) has "C" linkage
-dnl
-dnl argument 1 is name of function to check
-dnl
-dnl ASSUMES argument is a math function with TWO parameters
-dnl
-dnl GLIBCPP_CHECK_STDLIB_DECL_AND_LINKAGE_2
-AC_DEFUN(GLIBCPP_CHECK_STDLIB_DECL_AND_LINKAGE_2, [
- AC_MSG_CHECKING([for $1 declaration])
- if test x${glibcpp_cv_func_$1_use+set} != xset; then
- AC_CACHE_VAL(glibcpp_cv_func_$1_use, [
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- AC_TRY_COMPILE([#include <stdlib.h>],
- [ $1(0, 0);],
- [glibcpp_cv_func_$1_use=yes], [glibcpp_cv_func_$1_use=no])
- AC_LANG_RESTORE
- ])
- fi
- AC_MSG_RESULT($glibcpp_cv_func_$1_use)
- if test x$glibcpp_cv_func_$1_use = x"yes"; then
- AC_CHECK_FUNCS($1)
- fi
-])
-
-
-dnl
-dnl Check to see if the (stdlib function) argument passed is
-dnl 1) declared when using the c++ compiler
-dnl 2) has "C" linkage
-dnl
-dnl argument 1 is name of function to check
-dnl
-dnl ASSUMES argument is a function with THREE parameters
-dnl
-dnl GLIBCPP_CHECK_STDLIB_DECL_AND_LINKAGE_3
-AC_DEFUN(GLIBCPP_CHECK_STDLIB_DECL_AND_LINKAGE_3, [
- AC_MSG_CHECKING([for $1 declaration])
- if test x${glibcpp_cv_func_$1_use+set} != xset; then
- AC_CACHE_VAL(glibcpp_cv_func_$1_use, [
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- AC_TRY_COMPILE([#include <stdlib.h>],
- [ $1(0, 0, 0);],
- [glibcpp_cv_func_$1_use=yes], [glibcpp_cv_func_$1_use=no])
- AC_LANG_RESTORE
- ])
- fi
- AC_MSG_RESULT($glibcpp_cv_func_$1_use)
- if test x$glibcpp_cv_func_$1_use = x"yes"; then
- AC_CHECK_FUNCS($1)
- fi
-])
-
-dnl
-dnl Check to see if the (unistd function) argument passed is
-dnl 1) declared when using the c++ compiler
-dnl 2) has "C" linkage
-dnl
-dnl argument 1 is name of function to check
-dnl
-dnl ASSUMES argument is a function with ONE parameter
-dnl
-dnl GLIBCPP_CHECK_UNISTD_DECL_AND_LINKAGE_1
-AC_DEFUN(GLIBCPP_CHECK_UNISTD_DECL_AND_LINKAGE_1, [
- AC_MSG_CHECKING([for $1 declaration])
- if test x${glibcpp_cv_func_$1_use+set} != xset; then
- AC_CACHE_VAL(glibcpp_cv_func_$1_use, [
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- AC_TRY_COMPILE([#include <unistd.h>],
- [ $1(0);],
- [glibcpp_cv_func_$1_use=yes], [glibcpp_cv_func_$1_use=no])
- AC_LANG_RESTORE
- ])
- fi
- AC_MSG_RESULT($glibcpp_cv_func_$1_use)
- if test x$glibcpp_cv_func_$1_use = x"yes"; then
- AC_CHECK_FUNCS($1)
- fi
-])
-
-dnl
-dnl Because the builtins are picky picky picky about the arguments they take,
-dnl do an explict linkage tests here.
-dnl Check to see if the (math function) argument passed is
-dnl 1) declared when using the c++ compiler
-dnl 2) has "C" linkage
-dnl
-dnl Define HAVE_CARGF etc if "cargf" is declared and links
-dnl
-dnl argument 1 is name of function to check
-dnl
-dnl ASSUMES argument is a math function with ONE parameter
-dnl
-dnl GLIBCPP_CHECK_BUILTIN_MATH_DECL_LINKAGE_1
-AC_DEFUN(GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1, [
- AC_MSG_CHECKING([for $1 declaration])
- if test x${glibcpp_cv_func_$1_use+set} != xset; then
- AC_CACHE_VAL(glibcpp_cv_func_$1_use, [
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- AC_TRY_COMPILE([#include <math.h>],
- [ $1(0);],
- [glibcpp_cv_func_$1_use=yes], [glibcpp_cv_func_$1_use=no])
- AC_LANG_RESTORE
- ])
- fi
- AC_MSG_RESULT($glibcpp_cv_func_$1_use)
- if test x$glibcpp_cv_func_$1_use = x"yes"; then
- AC_MSG_CHECKING([for $1 linkage])
- if test x${glibcpp_cv_func_$1_link+set} != xset; then
- AC_CACHE_VAL(glibcpp_cv_func_$1_link, [
- AC_TRY_LINK([#include <math.h>],
- [ $1(0);],
- [glibcpp_cv_func_$1_link=yes], [glibcpp_cv_func_$1_link=no])
- ])
- fi
- AC_MSG_RESULT($glibcpp_cv_func_$1_link)
- if test x$glibcpp_cv_func_$1_link = x"yes"; then
- ac_tr_func=HAVE_`echo $1 | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- AC_DEFINE_UNQUOTED(${ac_tr_func})
- fi
- fi
-])
-
-
-dnl
-dnl Check to see what builtin math functions are supported
-dnl
-dnl check for __builtin_abs
-dnl check for __builtin_fabsf
-dnl check for __builtin_fabs
-dnl check for __builtin_fabl
-dnl check for __builtin_labs
-dnl check for __builtin_sqrtf
-dnl check for __builtin_sqrtl
-dnl check for __builtin_sqrt
-dnl check for __builtin_sinf
-dnl check for __builtin_sin
-dnl check for __builtin_sinl
-dnl check for __builtin_cosf
-dnl check for __builtin_cos
-dnl check for __builtin_cosl
-dnl
-dnl GLIBCPP_CHECK_BUILTIN_MATH_SUPPORT
-AC_DEFUN(GLIBCPP_CHECK_BUILTIN_MATH_SUPPORT, [
- dnl Test for builtin math functions.
- dnl These are made in gcc/c-common.c
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_abs)
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_fabsf)
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_fabs)
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_fabsl)
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_labs)
-
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_sqrtf)
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_sqrt)
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_sqrtl)
-
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_sinf)
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_sin)
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_sinl)
-
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_cosf)
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_cos)
- GLIBCPP_CHECK_BUILTIN_MATH_DECL_AND_LINKAGE_1(__builtin_cosl)
-
- dnl There is, without a doubt, a more elegant way to have these
- dnl names exported so that they won't be stripped out of acconfig.h by
- dnl autoheader. I leave this as an exercise to somebody less frustrated
- dnl than I.... please email the libstdc++ list if you can figure out a
- dnl more elegant approach (see autoconf/acgen.m4 and specifically
- dnl AC_CHECK_FUNC for things to steal.)
- dummyvar=no
- if test x$dummyvar = x"yes"; then
- AC_DEFINE(HAVE___BUILTIN_ABS)
- AC_DEFINE(HAVE___BUILTIN_LABS)
- AC_DEFINE(HAVE___BUILTIN_COS)
- AC_DEFINE(HAVE___BUILTIN_COSF)
- AC_DEFINE(HAVE___BUILTIN_COSL)
- AC_DEFINE(HAVE___BUILTIN_FABS)
- AC_DEFINE(HAVE___BUILTIN_FABSF)
- AC_DEFINE(HAVE___BUILTIN_FABSL)
- AC_DEFINE(HAVE___BUILTIN_SIN)
- AC_DEFINE(HAVE___BUILTIN_SINF)
- AC_DEFINE(HAVE___BUILTIN_SINL)
- AC_DEFINE(HAVE___BUILTIN_SQRT)
- AC_DEFINE(HAVE___BUILTIN_SQRTF)
- AC_DEFINE(HAVE___BUILTIN_SQRTL)
- fi
-])
-
-dnl
-dnl Check to see what the underlying c library is like
-dnl These checks need to do two things:
-dnl 1) make sure the name is declared when using the c++ compiler
-dnl 2) make sure the name has "C" linkage
-dnl This might seem like overkill but experience has shown that it's not...
-dnl
-dnl Define HAVE_STRTOLD if "strtold" is declared and links
-dnl Define HAVE_STRTOF if "strtof" is declared and links
-dnl Define HAVE_DRAND48 if "drand48" is declared and links
-dnl
-dnl GLIBCPP_CHECK_STDLIB_SUPPORT
-AC_DEFUN(GLIBCPP_CHECK_STDLIB_SUPPORT, [
- ac_test_CXXFLAGS="${CXXFLAGS+set}"
- ac_save_CXXFLAGS="$CXXFLAGS"
- CXXFLAGS='-fno-builtins -D_GNU_SOURCE'
-
- GLIBCPP_CHECK_STDLIB_DECL_AND_LINKAGE_2(strtold)
- GLIBCPP_CHECK_STDLIB_DECL_AND_LINKAGE_2(strtof)
- AC_CHECK_FUNCS(drand48)
-
- CXXFLAGS="$ac_save_CXXFLAGS"
-])
-
-dnl
-dnl Check to see what the underlying c library is like
-dnl These checks need to do two things:
-dnl 1) make sure the name is declared when using the c++ compiler
-dnl 2) make sure the name has "C" linkage
-dnl This might seem like overkill but experience has shown that it's not...
-dnl
-dnl Define HAVE_ISATTY if "isatty" is declared and links
-dnl
-dnl GLIBCPP_CHECK_UNISTD_SUPPORT
-AC_DEFUN(GLIBCPP_CHECK_UNISTD_SUPPORT, [
- ac_test_CXXFLAGS="${CXXFLAGS+set}"
- ac_save_CXXFLAGS="$CXXFLAGS"
- CXXFLAGS='-fno-builtins -D_GNU_SOURCE'
-
- GLIBCPP_CHECK_UNISTD_DECL_AND_LINKAGE_1(isatty)
-
- CXXFLAGS="$ac_save_CXXFLAGS"
-])
-
-dnl
-dnl Check to see what the underlying c library or math library is like.
-dnl These checks need to do two things:
-dnl 1) make sure the name is declared when using the c++ compiler
-dnl 2) make sure the name has "C" linkage
-dnl This might seem like overkill but experience has shown that it's not...
-dnl
-dnl Define HAVE_CARGF etc if "cargf" is found.
-dnl
-dnl GLIBCPP_CHECK_MATH_SUPPORT
-AC_DEFUN(GLIBCPP_CHECK_MATH_SUPPORT, [
- ac_test_CXXFLAGS="${CXXFLAGS+set}"
- ac_save_CXXFLAGS="$CXXFLAGS"
- CXXFLAGS='-fno-builtins -D_GNU_SOURCE'
-
- dnl Check libm
- AC_CHECK_LIB(m, sin, libm="-lm")
- ac_save_LIBS="$LIBS"
- LIBS="$LIBS $libm"
-
- dnl Check to see if certain C math functions exist.
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(isinf)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(isnan)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(finite)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(copysign)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_3(sincos)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(fpclass)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(qfpclass)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(hypot)
-
- dnl Check to see if basic C math functions have float versions.
- GLIBCPP_CHECK_MATH_DECLS_AND_LINKAGES_1(float trig,
- float_trig,
- acosf asinf atanf \
- cosf sinf tanf \
- coshf sinhf tanhf)
- GLIBCPP_CHECK_MATH_DECLS_AND_LINKAGES_1(float round,
- float_round,
- ceilf floorf)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(expf)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(isnanf)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(isinff)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(atan2f)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(fabsf)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(fmodf)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(frexpf)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(hypotf)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(ldexpf)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(logf)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(log10f)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(modff)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(powf)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(sqrtf)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_3(sincosf)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(finitef)
-
- dnl Check to see if basic C math functions have long double versions.
- GLIBCPP_CHECK_MATH_DECLS_AND_LINKAGES_1(long double trig,
- long_double_trig,
- acosl asinl atanl \
- cosl sinl tanl \
- coshl sinhl tanhl)
- GLIBCPP_CHECK_MATH_DECLS_AND_LINKAGES_1(long double round,
- long_double_round,
- ceill floorl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(isnanl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(isinfl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(copysignl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(atan2l)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(expl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(fabsl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(fmodl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(frexpl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(hypotl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(ldexpl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(logl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(log10l)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(modfl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_2(powl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(sqrtl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_3(sincosl)
- GLIBCPP_CHECK_MATH_DECL_AND_LINKAGE_1(finitel)
-
- dnl Some runtimes have these functions with a preceding underscore. Please
- dnl keep this sync'd with the one above. And if you add any new symbol,
- dnl please add the corresponding block in the @BOTTOM@ section of acconfig.h.
- dnl Check to see if certain C math functions exist.
-
- dnl Check to see if basic C math functions have float versions.
- GLIBCPP_CHECK_MATH_DECLS_AND_LINKAGES_1(_float trig,
- _float_trig,
- _acosf _asinf _atanf \
- _cosf _sinf _tanf \
- _coshf _sinhf _tanhf)
- GLIBCPP_CHECK_MATH_DECLS_AND_LINKAGES_1(_float round,
- _float_round,
- _ceilf _floorf)
-
- dnl Check to see if basic C math functions have long double versions.
- GLIBCPP_CHECK_MATH_DECLS_AND_LINKAGES_1(_long double trig,
- _long_double_trig,
- _acosl _asinl _atanl \
- _cosl _sinl _tanl \
- _coshl _sinhl _tanhl)
- GLIBCPP_CHECK_MATH_DECLS_AND_LINKAGES_1(_long double round,
- _long_double_round,
- _ceill _floorl)
-
- LIBS="$ac_save_LIBS"
- CXXFLAGS="$ac_save_CXXFLAGS"
-])
-
-
-dnl
-dnl Check to see if there is native support for complex
-dnl
-dnl Don't compile bits in math/* if native support exits.
-dnl
-dnl Define USE_COMPLEX_LONG_DOUBLE etc if "copysignl" is found.
-dnl
-dnl GLIBCPP_CHECK_COMPLEX_MATH_SUPPORT
-AC_DEFUN(GLIBCPP_CHECK_COMPLEX_MATH_SUPPORT, [
- dnl Check for complex versions of math functions of platform.
- AC_CHECK_LIB(m, main)
- AC_REPLACE_MATHFUNCS(nan copysignf)
-
- dnl For __signbit to signbit conversions.
- AC_CHECK_FUNCS([__signbit], , [LIBMATHOBJS="$LIBMATHOBJS signbit.lo"])
- AC_CHECK_FUNCS([__signbitf], , [LIBMATHOBJS="$LIBMATHOBJS signbitf.lo"])
-
- dnl Compile the long double complex functions only if the function
- dnl provides the non-complex long double functions that are needed.
- dnl Currently this includes copysignl, which should be
- dnl cached from the GLIBCPP_CHECK_MATH_SUPPORT macro, above.
- if test x$ac_cv_func_copysignl = x"yes"; then
- AC_CHECK_FUNCS([__signbitl], , [LIBMATHOBJS="$LIBMATHOBJS signbitl.lo"])
- fi
-
- if test -n "$LIBMATHOBJS"; then
- need_libmath=yes
- fi
- AC_SUBST(LIBMATHOBJS)
- AM_CONDITIONAL(GLIBCPP_BUILD_LIBMATH, test "$need_libmath" = yes)
-])
-
-
-dnl Check to see what architecture and operating system we are compiling
-dnl for. Also, if architecture- or OS-specific flags are required for
-dnl compilation, pick them up here.
-dnl
-dnl GLIBCPP_CHECK_TARGET
-AC_DEFUN(GLIBCPP_CHECK_TARGET, [
- . [$]{glibcpp_basedir}/configure.target
- AC_MSG_RESULT(CPU config directory is $cpu_include_dir)
- AC_MSG_RESULT(OS config directory is $os_include_dir)
-])
-
-
-dnl
-dnl Check to see if this target can enable the wchar_t parts of libstdc++.
-dnl If --disable-c-mbchar was given, no wchar_t stuff is enabled. (This
-dnl must have been previously checked.)
-dnl
-dnl Define _GLIBCPP_USE_WCHAR_T if all the bits are found
-dnl Define HAVE_MBSTATE_T if mbstate_t is not in wchar.h
-dnl
-dnl GLIBCPP_CHECK_WCHAR_T_SUPPORT
-AC_DEFUN(GLIBCPP_CHECK_WCHAR_T_SUPPORT, [
-
- dnl Test wchar.h for mbstate_t, which is needed for char_traits and
- dnl others even if wchar_t support is not on.
- AC_MSG_CHECKING([for mbstate_t])
- AC_TRY_COMPILE([#include <wchar.h>],
- [mbstate_t teststate;],
- have_mbstate_t=yes, have_mbstate_t=no)
- AC_MSG_RESULT($have_mbstate_t)
- if test x"$have_mbstate_t" = xyes; then
- AC_DEFINE(HAVE_MBSTATE_T)
- fi
-
- dnl Sanity check for existence of ISO C99 headers for extended encoding.
- AC_CHECK_HEADERS(wchar.h, ac_has_wchar_h=yes, ac_has_wchar_h=no)
- AC_CHECK_HEADERS(wctype.h, ac_has_wctype_h=yes, ac_has_wctype_h=no)
-
- dnl Only continue checking if the ISO C99 headers exist and support is on.
- if test x"$ac_has_wchar_h" = xyes &&
- test x"$ac_has_wctype_h" = xyes &&
- test x"$enable_c_mbchar" != xno; then
-
- dnl Test wchar.h for WCHAR_MIN, WCHAR_MAX, which is needed before
- dnl numeric_limits can instantiate type_traits<wchar_t>
- AC_MSG_CHECKING([for WCHAR_MIN and WCHAR_MAX])
- AC_TRY_COMPILE([#include <wchar.h>],
- [int i = WCHAR_MIN; int j = WCHAR_MAX;],
- has_wchar_minmax=yes, has_wchar_minmax=no)
- AC_MSG_RESULT($has_wchar_minmax)
-
- dnl Test wchar.h for WEOF, which is what we use to determine whether
- dnl to specialize for char_traits<wchar_t> or not.
- AC_MSG_CHECKING([for WEOF])
- AC_TRY_COMPILE([
- #include <wchar.h>
- #include <stddef.h>],
- [wint_t i = WEOF;],
- has_weof=yes, has_weof=no)
- AC_MSG_RESULT($has_weof)
-
- dnl Tests for wide character functions used in char_traits<wchar_t>.
- ac_wfuncs=yes
- AC_CHECK_FUNCS(wcslen wmemchr wmemcmp wmemcpy wmemmove wmemset,, \
- ac_wfuncs=no)
-
- dnl Checks for names injected into std:: by the c_std headers.
- AC_CHECK_FUNCS(btowc wctob fgetwc fgetwc fgetws fputwc fputws fwide \
- fwprintf fwscanf swprintf swscanf vfwprintf vfwscanf vswprintf vswscanf \
- vwprintf vwscanf wprintf wscanf getwc getwchar mbsinit mbrlen mbrtowc \
- mbsrtowcs wcsrtombs putwc putwchar ungetwc wcrtomb wcstod wcstof wcstol \
- wcstoul wcscpy wcsncpy wcscat wcsncat wcscmp wcscoll wcsncmp wcsxfrm \
- wcscspn wcsspn wcstok wcsftime wcschr wcspbrk wcsrchr wcsstr,, \
- ac_wfuncs=no)
-
- AC_MSG_CHECKING([for ISO C99 wchar_t support])
- if test x"$has_weof" = xyes &&
- test x"$has_wchar_minmax" = xyes &&
- test x"$ac_wfuncs" = xyes; then
- ac_isoC99_wchar_t=yes
- else
- ac_isoC99_wchar_t=no
- fi
- AC_MSG_RESULT($ac_isoC99_wchar_t)
-
- dnl Use iconv for wchar_t to char conversions. As such, check for
- dnl X/Open Portability Guide, version 2 features (XPG2).
- AC_CHECK_HEADER(iconv.h, ac_has_iconv_h=yes, ac_has_iconv_h=no)
- AC_CHECK_HEADER(langinfo.h, ac_has_langinfo_h=yes, ac_has_langinfo_h=no)
-
- dnl Check for existence of libiconv.a providing XPG2 wchar_t support.
- AC_CHECK_LIB(iconv, iconv, libiconv="-liconv")
- ac_save_LIBS="$LIBS"
- LIBS="$LIBS $libiconv"
-
- AC_CHECK_FUNCS(iconv_open iconv_close iconv nl_langinfo, \
- ac_XPG2funcs=yes, ac_XPG2funcs=no)
-
- LIBS="$ac_save_LIBS"
-
- AC_MSG_CHECKING([for XPG2 wchar_t support])
- if test x"$ac_has_iconv_h" = xyes &&
- test x"$ac_has_langinfo_h" = xyes &&
- test x"$ac_XPG2funcs" = xyes; then
- ac_XPG2_wchar_t=yes
- else
- ac_XPG2_wchar_t=no
- fi
- AC_MSG_RESULT($ac_XPG2_wchar_t)
-
- dnl At the moment, only enable wchar_t specializations if all the
- dnl above support is present.
- AC_MSG_CHECKING([for enabled wchar_t specializations])
- if test x"$ac_isoC99_wchar_t" = xyes &&
- test x"$ac_XPG2_wchar_t" = xyes; then
- AC_DEFINE(_GLIBCPP_USE_WCHAR_T)
- AC_MSG_RESULT("yes")
- else
- AC_MSG_RESULT("no")
- fi
- else
- dnl Wide characters disabled by the user.
- AC_MSG_WARN([wchar_t support disabled.])
- fi
-])
-
-
-dnl
-dnl Check to see if debugging libraries are to be built.
-dnl
-dnl GLIBCPP_ENABLE_DEBUG
-dnl
-dnl --enable-debug
-dnl builds a separate set of debugging libraries in addition to the
-dnl normal (shared, static) libstdc++ binaries.
-dnl
-dnl --disable-debug
-dnl builds only one (non-debug) version of libstdc++.
-dnl
-dnl --enable-debug-flags=FLAGS
-dnl iff --enable-debug == yes, then use FLAGS to build the debug library.
-dnl
-dnl + Usage: GLIBCPP_ENABLE_DEBUG[(DEFAULT)]
-dnl Where DEFAULT is either `yes' or `no'. If ommitted, it
-dnl defaults to `no'.
-AC_DEFUN(GLIBCPP_ENABLE_DEBUG, [dnl
-define([GLIBCPP_ENABLE_DEBUG_DEFAULT], ifelse($1, yes, yes, no))dnl
-AC_ARG_ENABLE(debug,
-changequote(<<, >>)dnl
-<< --enable-debug extra debugging, turn off optimization [default=>>GLIBCPP_ENABLE_DEBUG_DEFAULT],
-changequote([, ])dnl
-[case "${enableval}" in
- yes) enable_debug=yes ;;
- no) enable_debug=no ;;
- *) AC_MSG_ERROR([Unknown argument to enable/disable extra debugging]) ;;
- esac],
-enable_debug=GLIBCPP_ENABLE_DEBUG_DEFAULT)dnl
-AC_MSG_CHECKING([for additional debug build])
-AC_MSG_RESULT($enable_debug)
-AM_CONDITIONAL(GLIBCPP_BUILD_DEBUG, test "$enable_debug" = yes)
-])
-
-
-dnl Check for explicit debug flags.
-dnl
-dnl GLIBCPP_ENABLE_DEBUG_FLAGS
-dnl
-dnl --enable-debug-flags='-O1'
-dnl is a general method for passing flags to be used when
-dnl building debug libraries with --enable-debug.
-dnl
-dnl --disable-debug-flags does nothing.
-dnl + Usage: GLIBCPP_ENABLE_DEBUG_FLAGS(default flags)
-dnl If "default flags" is an empty string (or "none"), the effect is
-dnl the same as --disable or --enable=no.
-AC_DEFUN(GLIBCPP_ENABLE_DEBUG_FLAGS, [dnl
-define([GLIBCPP_ENABLE_DEBUG_FLAGS_DEFAULT], ifelse($1,,, $1))dnl
-AC_ARG_ENABLE(debug_flags,
-changequote(<<, >>)dnl
-<< --enable-debug-flags=FLAGS pass compiler FLAGS when building debug
- library;[default=>>GLIBCPP_ENABLE_DEBUG_FLAGS_DEFAULT],
-changequote([, ])dnl
-[case "${enableval}" in
- none) ;;
- -*) enable_debug_flags="${enableval}" ;;
- *) AC_MSG_ERROR([Unknown argument to extra debugging flags]) ;;
- esac],
-enable_debug_flags=GLIBCPP_ENABLE_DEBUG_FLAGS_DEFAULT)dnl
-
-dnl Option parsed, now set things appropriately
-case x"$enable_debug" in
- xyes)
- case "$enable_debug_flags" in
- none)
- DEBUG_FLAGS="-g3 -O0";;
- -*) #valid input
- DEBUG_FLAGS="${enableval}"
- esac
- ;;
- xno)
- DEBUG_FLAGS=""
- ;;
-esac
-AC_SUBST(DEBUG_FLAGS)
-
-AC_MSG_CHECKING([for debug build flags])
-AC_MSG_RESULT($DEBUG_FLAGS)
-])
-
-
-dnl
-dnl Check for "unusual" flags to pass to the compiler while building.
-dnl
-dnl GLIBCPP_ENABLE_CXX_FLAGS
-dnl --enable-cxx-flags='-foo -bar -baz' is a general method for passing
-dnl experimental flags such as -fhonor-std, -fsquangle, -Dfloat=char, etc.
-dnl Somehow this same set of flags must be passed when [re]building
-dnl libgcc.
-dnl --disable-cxx-flags passes nothing.
-dnl + See http://gcc.gnu.org/ml/libstdc++/2000-q2/msg00131.html
-dnl http://gcc.gnu.org/ml/libstdc++/2000-q2/msg00284.html
-dnl http://gcc.gnu.org/ml/libstdc++/2000-q1/msg00035.html
-dnl + Usage: GLIBCPP_ENABLE_CXX_FLAGS(default flags)
-dnl If "default flags" is an empty string (or "none"), the effect is
-dnl the same as --disable or --enable=no.
-AC_DEFUN(GLIBCPP_ENABLE_CXX_FLAGS, [dnl
-define([GLIBCPP_ENABLE_CXX_FLAGS_DEFAULT], ifelse($1,,, $1))dnl
-AC_MSG_CHECKING([for extra compiler flags for building])
-AC_ARG_ENABLE(cxx_flags,
-changequote(<<, >>)dnl
-<< --enable-cxx-flags=FLAGS pass compiler FLAGS when building library;
- [default=>>GLIBCPP_ENABLE_CXX_FLAGS_DEFAULT],
-changequote([, ])dnl
-[case "x$enable_cxx_flags" in
- xyes)
- AC_MSG_ERROR([--enable-cxx-flags needs compiler flags as arguments]) ;;
- xno | xnone | x)
- enable_cxx_flags='' ;;
- *)
- enable_cxx_flags="$enableval" ;;
-esac],
-enable_cxx_flags=GLIBCPP_ENABLE_CXX_FLAGS_DEFAULT)
-
-dnl Run through flags (either default or command-line) and set anything
-dnl extra (e.g., #defines) that must accompany particular g++ options.
-if test -n "$enable_cxx_flags"; then
- for f in $enable_cxx_flags; do
- case "$f" in
- -fhonor-std) ;;
- -*) ;;
- *) # and we're trying to pass /what/ exactly?
- AC_MSG_ERROR([compiler flags start with a -]) ;;
- esac
- done
-fi
-EXTRA_CXX_FLAGS="$enable_cxx_flags"
-AC_MSG_RESULT($EXTRA_CXX_FLAGS)
-AC_SUBST(EXTRA_CXX_FLAGS)
-])
-
-
-dnl
-dnl Check for which locale library to use: gnu or generic.
-dnl
-dnl GLIBCPP_ENABLE_CLOCALE
-dnl --enable-clocale=gnu sets config/locale/c_locale_gnu.cc and friends
-dnl --enable-clocale=generic sets config/locale/c_locale_generic.cc and friends
-dnl
-dnl default is generic
-dnl
-AC_DEFUN(GLIBCPP_ENABLE_CLOCALE, [
- AC_MSG_CHECKING([for clocale to use])
- AC_ARG_ENABLE(clocale,
- [ --enable-clocale enable model for target locale package.
- --enable-clocale=MODEL use MODEL target-speific locale package. [default=generic]
- ],
- if test x$enable_clocale = xno; then
- enable_clocale=no
- fi,
- enable_clocale=no)
-
- enable_clocale_flag=$enable_clocale
-
- dnl Probe for locale support if no specific model is specified.
- dnl Default to "generic"
- if test x$enable_clocale_flag = xno; then
- case x${target_os} in
- xlinux* | xgnu*)
- AC_EGREP_CPP([_GLIBCPP_ok], [
- #include <features.h>
- #if __GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2)
- _GLIBCPP_ok
- #endif
- ], enable_clocale_flag=gnu, enable_clocale_flag=generic)
-
- # Test for bugs early in glibc-2.2.x series
- if test x$enable_clocale_flag = xgnu; then
- AC_TRY_RUN([
- #define _GNU_SOURCE 1
- #include <locale.h>
- #include <string.h>
- #if __GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ > 2)
- extern __typeof(newlocale) __newlocale;
- extern __typeof(duplocale) __duplocale;
- extern __typeof(strcoll_l) __strcoll_l;
- #endif
- int main()
- {
- const char __one[] = "Äuglein Augmen";
- const char __two[] = "Äuglein";
- int i;
- int j;
- __locale_t loc;
- __locale_t loc_dup;
- loc = __newlocale(1 << LC_ALL, "de_DE", 0);
- loc_dup = __duplocale(loc);
- i = __strcoll_l(__one, __two, loc);
- j = __strcoll_l(__one, __two, loc_dup);
- return 0;
- }
- ],
- [enable_clocale_flag=gnu],[enable_clocale_flag=generic],
- [enable_clocale_flag=generic])
- fi
-
- # ... at some point put __strxfrm_l tests in as well.
- ;;
- *)
- enable_clocale_flag=generic
- ;;
- esac
- fi
-
- dnl Deal with gettext issues.
- AC_ARG_ENABLE(nls,
- [ --enable-nls use Native Language Support (default)],
- , enable_nls=yes)
- USE_NLS=no
-
- dnl Set configure bits for specified locale package
- case x${enable_clocale_flag} in
- xgeneric)
- AC_MSG_RESULT(generic)
-
- CLOCALE_H=config/locale/generic/c_locale.h
- CLOCALE_CC=config/locale/generic/c_locale.cc
- CCODECVT_H=config/locale/generic/codecvt_specializations.h
- CCODECVT_CC=config/locale/generic/codecvt_members.cc
- CCOLLATE_CC=config/locale/generic/collate_members.cc
- CCTYPE_CC=config/locale/generic/ctype_members.cc
- CMESSAGES_H=config/locale/generic/messages_members.h
- CMESSAGES_CC=config/locale/generic/messages_members.cc
- CMONEY_CC=config/locale/generic/monetary_members.cc
- CNUMERIC_CC=config/locale/generic/numeric_members.cc
- CTIME_CC=config/locale/generic/time_members.cc
- CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h
- ;;
- xgnu)
- AC_MSG_RESULT(gnu)
-
- # Declare intention to use gettext, and add support for specific
- # languages.
- # For some reason, ALL_LINGUAS has to be before AM-GNU-GETTEXT
- ALL_LINGUAS="de fr"
-
- # Don't call AM-GNU-GETTEXT here. Instead, assume glibc.
- AC_CHECK_PROG(check_msgfmt, msgfmt, yes, no)
- if test x"$check_msgfmt" = x"yes" && test x"$enable_nls" = x"yes"; then
- USE_NLS=yes
- fi
- # Export the build objects.
- for ling in $ALL_LINGUAS; do \
- glibcpp_MOFILES="$glibcpp_MOFILES $ling.mo"; \
- glibcpp_POFILES="$glibcpp_POFILES $ling.po"; \
- done
- AC_SUBST(glibcpp_MOFILES)
- AC_SUBST(glibcpp_POFILES)
-
- CLOCALE_H=config/locale/gnu/c_locale.h
- CLOCALE_CC=config/locale/gnu/c_locale.cc
- CCODECVT_H=config/locale/ieee_1003.1-2001/codecvt_specializations.h
- CCODECVT_CC=config/locale/gnu/codecvt_members.cc
- CCOLLATE_CC=config/locale/gnu/collate_members.cc
- CCTYPE_CC=config/locale/gnu/ctype_members.cc
- CMESSAGES_H=config/locale/gnu/messages_members.h
- CMESSAGES_CC=config/locale/gnu/messages_members.cc
- CMONEY_CC=config/locale/gnu/monetary_members.cc
- CNUMERIC_CC=config/locale/gnu/numeric_members.cc
- CTIME_CC=config/locale/gnu/time_members.cc
- CLOCALE_INTERNAL_H=config/locale/gnu/c++locale_internal.h
- ;;
- xieee_1003.1-2001)
- AC_MSG_RESULT(generic)
-
- CLOCALE_H=config/locale/ieee_1003.1-2001/c_locale.h
- CLOCALE_CC=config/locale/ieee_1003.1-2001/c_locale.cc
- CCODECVT_H=config/locale/ieee_1003.1-2001/codecvt_specializations.h
- CCODECVT_CC=config/locale/generic/codecvt_members.cc
- CCOLLATE_CC=config/locale/generic/collate_members.cc
- CCTYPE_CC=config/locale/generic/ctype_members.cc
- CMESSAGES_H=config/locale/ieee_1003.1-2001/messages_members.h
- CMESSAGES_CC=config/locale/ieee_1003.1-2001/messages_members.cc
- CMONEY_CC=config/locale/generic/monetary_members.cc
- CNUMERIC_CC=config/locale/generic/numeric_members.cc
- CTIME_CC=config/locale/generic/time_members.cc
- CLOCALE_INTERNAL_H=config/locale/generic/c++locale_internal.h
- ;;
- *)
- echo "$enable_clocale is an unknown locale package" 1>&2
- exit 1
- ;;
- esac
-
- # This is where the testsuite looks for locale catalogs, using the
- # -DLOCALEDIR define during testsuite compilation.
- glibcpp_localedir=${glibcpp_builddir}/po/share/locale
- AC_SUBST(glibcpp_localedir)
-
- AC_SUBST(USE_NLS)
- AC_SUBST(CLOCALE_H)
- AC_SUBST(CCODECVT_H)
- AC_SUBST(CMESSAGES_H)
- AC_SUBST(CCODECVT_CC)
- AC_SUBST(CCOLLATE_CC)
- AC_SUBST(CCTYPE_CC)
- AC_SUBST(CMESSAGES_CC)
- AC_SUBST(CMONEY_CC)
- AC_SUBST(CNUMERIC_CC)
- AC_SUBST(CTIME_CC)
- AC_SUBST(CLOCALE_CC)
- AC_SUBST(CLOCALE_INTERNAL_H)
-])
-
-
-dnl
-dnl Check for which I/O library to use: libio, or something specific.
-dnl
-dnl GLIBCPP_ENABLE_CSTDIO
-dnl --enable-cstdio=libio sets config/io/c_io_libio.h and friends
-dnl
-dnl default is stdio
-dnl
-AC_DEFUN(GLIBCPP_ENABLE_CSTDIO, [
- AC_MSG_CHECKING([for cstdio to use])
- AC_ARG_ENABLE(cstdio,
- [ --enable-cstdio enable stdio for target io package.
- --enable-cstdio=LIB use LIB target-speific io package. [default=stdio]
- ],
- if test x$enable_cstdio = xno; then
- enable_cstdio=stdio
- fi,
- enable_cstdio=stdio)
-
- enable_cstdio_flag=$enable_cstdio
-
- dnl Check if a valid I/O package
- case x${enable_cstdio_flag} in
- xlibio)
- CSTDIO_H=config/io/c_io_libio.h
- BASIC_FILE_H=config/io/basic_file_libio.h
- BASIC_FILE_CC=config/io/basic_file_libio.cc
- AC_MSG_RESULT(libio)
-
- # see if we are on a system with libio native (ie, linux)
- AC_CHECK_HEADER(libio.h, has_libio=yes, has_libio=no)
-
- # Need to check and see what version of glibc is being used. If
- # it's not glibc-2.2 or higher, then we'll need to go ahead and
- # compile most of libio for linux systems.
- if test x$has_libio = x"yes"; then
- case "$target" in
- *-*-linux*)
- AC_MSG_CHECKING([for glibc version >= 2.2])
- AC_EGREP_CPP([ok], [
- #include <features.h>
- #if __GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2)
- ok
- #endif
- ], glibc_satisfactory=yes, glibc_satisfactory=no)
- AC_MSG_RESULT($glibc_satisfactory)
- ;;
- esac
-
- # XXX at the moment, admit defeat and force the recompilation
- # XXX of glibc even on glibc-2.2 systems, because libio is not synched.
- glibc_satisfactory=no
-
- if test x$glibc_satisfactory = x"yes"; then
- need_libio=no
- need_wlibio=no
- else
- need_libio=yes
- # bkoz XXX need to add checks to enable this
- # pme XXX here's a first pass at such a check
- if test x$enable_c_mbchar != xno; then
- need_wlibio=yes
- else
- need_wlibio=no
- fi
- fi
-
- else
- # Using libio, but <libio.h> doesn't exist on the target system. . .
- need_libio=yes
- # bkoz XXX need to add checks to enable this
- # pme XXX here's a first pass at such a check
- if test x$enable_c_mbchar != xno; then
- need_wlibio=yes
- else
- need_wlibio=no
- fi
- fi
- ;;
- xstdio | x | xno | xnone | xyes)
- # default
- CSTDIO_H=config/io/c_io_stdio.h
- BASIC_FILE_H=config/io/basic_file_stdio.h
- BASIC_FILE_CC=config/io/basic_file_stdio.cc
- AC_MSG_RESULT(stdio)
-
- # We're not using stdio.
- need_libio=no
- need_wlibio=no
- ;;
- *)
- echo "$enable_cstdio is an unknown io package" 1>&2
- exit 1
- ;;
- esac
- AC_SUBST(CSTDIO_H)
- AC_SUBST(BASIC_FILE_H)
- AC_SUBST(BASIC_FILE_CC)
-
- # 2000-08-04 bkoz hack
- CCODECVT_C=config/io/c_io_libio_codecvt.c
- AC_SUBST(CCODECVT_C)
- # 2000-08-04 bkoz hack
-
- AM_CONDITIONAL(GLIBCPP_BUILD_LIBIO,
- test "$need_libio" = yes || test "$need_wlibio" = yes)
- AM_CONDITIONAL(GLIBCPP_NEED_LIBIO, test "$need_libio" = yes)
- AM_CONDITIONAL(GLIBCPP_NEED_WLIBIO, test "$need_wlibio" = yes)
- if test "$need_libio" = yes || test "$need_wlibio" = yes; then
- libio_la=../libio/libio.la
- else
- libio_la=
- fi
- AC_SUBST(libio_la)
-])
-
-
-dnl
-dnl Setup to use the gcc gthr.h thread-specific memory and mutex model.
-dnl We must stage the required headers so that they will be installed
-dnl with the library (unlike libgcc, the STL implementation is provided
-dnl solely within headers). Since we must not inject random user-space
-dnl macro names into user-provided C++ code, we first stage into <file>-in
-dnl and process to <file> with an output command. The reason for a two-
-dnl stage process here is to correctly handle $srcdir!=$objdir without
-dnl having to write complex code (the sed commands to clean the macro
-dnl namespace are complex and fragile enough as it is). We must also
-dnl add a relative path so that -I- is supported properly.
-dnl
-AC_DEFUN(GLIBCPP_ENABLE_THREADS, [
- AC_MSG_CHECKING([for thread model used by GCC])
- target_thread_file=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
- AC_MSG_RESULT([$target_thread_file])
-
- if test $target_thread_file != single; then
- AC_DEFINE(HAVE_GTHR_DEFAULT)
- AC_DEFINE(_GLIBCPP_SUPPORTS_WEAK, __GXX_WEAK__)
- fi
-
- glibcpp_thread_h=gthr-$target_thread_file.h
- AC_SUBST(glibcpp_thread_h)
-])
-
-
-dnl
-dnl Check for exception handling support. If an explicit enable/disable
-dnl sjlj exceptions is given, we don't have to detect. Otherwise the
-dnl target may or may not support call frame exceptions.
-dnl
-dnl GLIBCPP_ENABLE_SJLJ_EXCEPTIONS
-dnl --enable-sjlj-exceptions forces the use of builtin setjmp.
-dnl --disable-sjlj-exceptions forces the use of call frame unwinding.
-dnl
-dnl Define _GLIBCPP_SJLJ_EXCEPTIONS if the compiler is configured for it.
-dnl
-AC_DEFUN(GLIBCPP_ENABLE_SJLJ_EXCEPTIONS, [
- AC_MSG_CHECKING([for exception model to use])
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- AC_ARG_ENABLE(sjlj-exceptions,
- [ --enable-sjlj-exceptions force use of builtin_setjmp for exceptions],
- [:],
- [dnl Botheration. Now we've got to detect the exception model.
- dnl Link tests against libgcc.a are problematic since -- at least
- dnl as of this writing -- we've not been given proper -L bits for
- dnl single-tree newlib and libgloss.
- dnl
- dnl This is what AC_TRY_COMPILE would do if it didn't delete the
- dnl conftest files before we got a change to grep them first.
- cat > conftest.$ac_ext << EOF
-[#]line __oline__ "configure"
-struct S { ~S(); };
-void bar();
-void foo()
-{
- S s;
- bar();
-}
-EOF
- old_CXXFLAGS="$CXXFLAGS"
- CXXFLAGS=-S
- if AC_TRY_EVAL(ac_compile); then
- if grep _Unwind_SjLj_Resume conftest.s >/dev/null 2>&1 ; then
- enable_sjlj_exceptions=yes
- elif grep _Unwind_Resume conftest.s >/dev/null 2>&1 ; then
- enable_sjlj_exceptions=no
- fi
- fi
- CXXFLAGS="$old_CXXFLAGS"
- rm -f conftest*])
- if test x$enable_sjlj_exceptions = xyes; then
- AC_DEFINE(_GLIBCPP_SJLJ_EXCEPTIONS, 1,
- [Define if the compiler is configured for setjmp/longjmp exceptions.])
- ac_exception_model_name=sjlj
- elif test x$enable_sjlj_exceptions = xno; then
- ac_exception_model_name="call frame"
- else
- AC_MSG_ERROR([unable to detect exception model])
- fi
- AC_LANG_RESTORE
- AC_MSG_RESULT($ac_exception_model_name)
-])
-
-
-dnl
-dnl Check for libunwind exception handling support. If enabled then
-dnl we assume that the _Unwind_* functions that make up the Unwind ABI
-dnl (_Unwind_RaiseException, _Unwind_Resume, etc.) are defined by
-dnl libunwind instead of libgcc and that libstdc++ has a dependency
-dnl on libunwind as well as libgcc.
-dnl
-dnl GLIBCPP_ENABLE_LIBUNWIND_EXCEPTIONS
-dnl --enable-libunwind-exceptions forces the use of libunwind.
-dnl --disable-libunwind-exceptions assumes there is no libunwind.
-dnl
-dnl Define _GLIBCPP_LIBUNWIND_EXCEPTIONS if requested.
-dnl
-AC_DEFUN(GLIBCPP_ENABLE_LIBUNWIND_EXCEPTIONS, [
- AC_MSG_CHECKING([for use of libunwind])
- AC_ARG_ENABLE(libunwind-exceptions,
- [ --enable-libunwind-exceptions force use of libunwind for exceptions],
- use_libunwind_exceptions=$enableval,
- use_libunwind_exceptions=no)
- AC_MSG_RESULT($use_libunwind_exceptions)
- dnl Option parsed, now set things appropriately
- if test x"$use_libunwind_exceptions" = xyes; then
- LIBUNWIND_FLAG="-lunwind"
- else
- LIBUNWIND_FLAG=""
- fi
- AC_SUBST(LIBUNWIND_FLAG)
-])
-
-dnl
-dnl Check for ISO/IEC 9899:1999 "C99" support.
-dnl
-dnl GLIBCPP_ENABLE_C99
-dnl --enable-c99 defines _GLIBCPP_USE_C99
-dnl --disable-c99 leaves _GLIBCPP_USE_C99 undefined
-dnl + Usage: GLIBCPP_ENABLE_C99[(DEFAULT)]
-dnl Where DEFAULT is either `yes' or `no'. If omitted, it
-dnl defaults to `no'.
-dnl + If 'C99' stuff is not available, ignores DEFAULT and sets `no'.
-dnl
-dnl GLIBCPP_ENABLE_C99
-AC_DEFUN(GLIBCPP_ENABLE_C99, [dnl
- define([GLIBCPP_ENABLE_C99_DEFAULT], ifelse($1, yes, yes, no))dnl
-
- AC_ARG_ENABLE(c99,
- changequote(<<, >>)dnl
- <<--enable-c99 turns on 'ISO/IEC 9899:1999 support' [default=>>GLIBCPP_ENABLE_C99_DEFAULT],
- changequote([, ])dnl
- [case "$enableval" in
- yes) enable_c99=yes ;;
- no) enable_c99=no ;;
- *) AC_MSG_ERROR([Unknown argument to enable/disable C99]) ;;
- esac],
- enable_c99=GLIBCPP_ENABLE_C99_DEFAULT)dnl
-
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
-
- # Check for the existence of <math.h> functions used if C99 is enabled.
- ac_c99_math=yes;
- AC_MSG_CHECKING([for ISO C99 support in <math.h>])
- AC_TRY_COMPILE([#include <math.h>],[fpclassify(0.0);],, [ac_c99_math=no])
- AC_TRY_COMPILE([#include <math.h>],[isfinite(0.0);],, [ac_c99_math=no])
- AC_TRY_COMPILE([#include <math.h>],[isinf(0.0);],, [ac_c99_math=no])
- AC_TRY_COMPILE([#include <math.h>],[isnan(0.0);],, [ac_c99_math=no])
- AC_TRY_COMPILE([#include <math.h>],[isnormal(0.0);],, [ac_c99_math=no])
- AC_TRY_COMPILE([#include <math.h>],[signbit(0.0);],, [ac_c99_math=no])
- AC_TRY_COMPILE([#include <math.h>],[isgreater(0.0,0.0);],, [ac_c99_math=no])
- AC_TRY_COMPILE([#include <math.h>],
- [isgreaterequal(0.0,0.0);],, [ac_c99_math=no])
- AC_TRY_COMPILE([#include <math.h>],[isless(0.0,0.0);],, [ac_c99_math=no])
- AC_TRY_COMPILE([#include <math.h>],[islessequal(0.0,0.0);],,[ac_c99_math=no])
- AC_TRY_COMPILE([#include <math.h>],
- [islessgreater(0.0,0.0);],, [ac_c99_math=no])
- AC_TRY_COMPILE([#include <math.h>],
- [isunordered(0.0,0.0);],, [ac_c99_math=no])
- AC_MSG_RESULT($ac_c99_math)
-
- # Check for the existence in <stdio.h> of vscanf, et. al.
- ac_c99_stdio=yes;
- AC_MSG_CHECKING([for ISO C99 support in <stdio.h>])
- AC_TRY_COMPILE([#include <stdio.h>],
- [snprintf("12", 0, "%i");],, [ac_c99_stdio=no])
- AC_TRY_COMPILE([#include <stdio.h>
- #include <stdarg.h>
- void foo(char* fmt, ...)
- {va_list args; va_start(args, fmt);
- vfscanf(stderr, "%i", args);}],
- [],, [ac_c99_stdio=no])
- AC_TRY_COMPILE([#include <stdio.h>
- #include <stdarg.h>
- void foo(char* fmt, ...)
- {va_list args; va_start(args, fmt);
- vscanf("%i", args);}],
- [],, [ac_c99_stdio=no])
- AC_TRY_COMPILE([#include <stdio.h>
- #include <stdarg.h>
- void foo(char* fmt, ...)
- {va_list args; va_start(args, fmt);
- vsnprintf(fmt, 0, "%i", args);}],
- [],, [ac_c99_stdio=no])
- AC_TRY_COMPILE([#include <stdio.h>
- #include <stdarg.h>
- void foo(char* fmt, ...)
- {va_list args; va_start(args, fmt);
- vsscanf(fmt, "%i", args);}],
- [],, [ac_c99_stdio=no])
- AC_MSG_RESULT($ac_c99_stdio)
-
- # Check for the existence in <stdlib.h> of lldiv_t, et. al.
- ac_c99_stdlib=yes;
- AC_MSG_CHECKING([for lldiv_t declaration])
- AC_CACHE_VAL(ac_c99_lldiv_t, [
- AC_TRY_COMPILE([#include <stdlib.h>],
- [ lldiv_t mydivt;],
- [ac_c99_lldiv_t=yes], [ac_c99_lldiv_t=no])
- ])
- AC_MSG_RESULT($ac_c99_lldiv_t)
-
- AC_MSG_CHECKING([for ISO C99 support in <stdlib.h>])
- AC_TRY_COMPILE([#include <stdlib.h>],
- [char* tmp; strtof("gnu", &tmp);],, [ac_c99_stdlib=no])
- AC_TRY_COMPILE([#include <stdlib.h>],
- [char* tmp; strtold("gnu", &tmp);],, [ac_c99_stdlib=no])
- AC_TRY_COMPILE([#include <stdlib.h>], [llabs(10);],, [ac_c99_stdlib=no])
- AC_TRY_COMPILE([#include <stdlib.h>], [lldiv(10,1);],, [ac_c99_stdlib=no])
- AC_TRY_COMPILE([#include <stdlib.h>], [atoll("10");],, [ac_c99_stdlib=no])
- AC_TRY_COMPILE([#include <stdlib.h>], [_Exit(0);],, [ac_c99_stdlib=no])
- if test x"$ac_c99_lldiv_t" = x"no"; then
- ac_c99_stdlib=no;
- fi;
- AC_MSG_RESULT($ac_c99_stdlib)
-
- # Check for the existence of <wchar.h> functions used if C99 is enabled.
- # XXX the wchar.h checks should be rolled into the general C99 bits.
- ac_c99_wchar=yes;
- AC_MSG_CHECKING([for additional ISO C99 support in <wchar.h>])
- AC_TRY_COMPILE([#include <wchar.h>],
- [wcstold(L"10.0", NULL);],, [ac_c99_wchar=no])
- AC_TRY_COMPILE([#include <wchar.h>],
- [wcstoll(L"10", NULL, 10);],, [ac_c99_wchar=no])
- AC_TRY_COMPILE([#include <wchar.h>],
- [wcstoull(L"10", NULL, 10);],, [ac_c99_wchar=no])
- AC_MSG_RESULT($ac_c99_wchar)
-
- AC_MSG_CHECKING([for enabled ISO C99 support])
- if test x"$ac_c99_math" = x"no" ||
- test x"$ac_c99_stdio" = x"no" ||
- test x"$ac_c99_stdlib" = x"no" ||
- test x"$ac_c99_wchar" = x"no"; then
- enable_c99=no;
- fi;
- AC_MSG_RESULT($enable_c99)
-
- # Option parsed, now set things appropriately
- if test x"$enable_c99" = x"yes"; then
- AC_DEFINE(_GLIBCPP_USE_C99)
- fi
-
- AC_LANG_RESTORE
-])
-
-
-dnl
-dnl Check for template specializations for the 'long long' type extension.
-dnl The result determines only whether 'long long' I/O is enabled; things
-dnl like numeric_limits<> specializations are always available.
-dnl
-dnl GLIBCPP_ENABLE_LONG_LONG
-dnl --enable-long-long defines _GLIBCPP_USE_LONG_LONG
-dnl --disable-long-long leaves _GLIBCPP_USE_LONG_LONG undefined
-dnl + Usage: GLIBCPP_ENABLE_LONG_LONG[(DEFAULT)]
-dnl Where DEFAULT is either `yes' or `no'. If omitted, it
-dnl defaults to `no'.
-dnl + If 'long long' stuff is not available, ignores DEFAULT and sets `no'.
-dnl
-dnl GLIBCPP_ENABLE_LONG_LONG
-AC_DEFUN(GLIBCPP_ENABLE_LONG_LONG, [dnl
- define([GLIBCPP_ENABLE_LONG_LONG_DEFAULT], ifelse($1, yes, yes, no))dnl
-
- AC_ARG_ENABLE(long-long,
- changequote(<<, >>)dnl
- <<--enable-long-long turns on 'long long' [default=>>GLIBCPP_ENABLE_LONG_LONG_DEFAULT],
- changequote([, ])dnl
- [case "$enableval" in
- yes) enable_long_long=yes ;;
- no) enable_long_long=no ;;
- *) AC_MSG_ERROR([Unknown argument to enable/disable long long]) ;;
- esac],
- enable_long_long=GLIBCPP_ENABLE_LONG_LONG_DEFAULT)dnl
-
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
-
- AC_MSG_CHECKING([for enabled long long I/O support])
- # iostreams require strtoll, strtoull to compile
- AC_TRY_COMPILE([#include <stdlib.h>],
- [char* tmp; strtoll("gnu", &tmp, 10);],,[enable_long_long=no])
- AC_TRY_COMPILE([#include <stdlib.h>],
- [char* tmp; strtoull("gnu", &tmp, 10);],,[enable_long_long=no])
-
- # Option parsed, now set things appropriately
- if test x"$enable_long_long" = xyes; then
- AC_DEFINE(_GLIBCPP_USE_LONG_LONG)
- fi
- AC_MSG_RESULT($enable_long_long)
-
- AC_LANG_RESTORE
-])
+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-dnl
-dnl Check for what type of C headers to use.
-dnl
-dnl GLIBCPP_ENABLE_CHEADERS
-dnl --enable-cheaders= [does stuff].
-dnl --disable-cheaders [does not do anything, really].
-dnl + Usage: GLIBCPP_ENABLE_CHEADERS[(DEFAULT)]
-dnl Where DEFAULT is either `c' or `c_std'.
-dnl If ommitted, it defaults to `c_std'.
-AC_DEFUN(GLIBCPP_ENABLE_CHEADERS, [dnl
-define([GLIBCPP_ENABLE_CHEADERS_DEFAULT], ifelse($1, c_std, c_std, c_std))dnl
-AC_MSG_CHECKING([for c header strategy to use])
-AC_ARG_ENABLE(cheaders,
-changequote(<<, >>)dnl
-<< --enable-cheaders=MODEL construct "C" header files for g++ [default=>>GLIBCPP_ENABLE_CHEADERS_DEFAULT],
-changequote([, ])
- [case "$enableval" in
- c)
- enable_cheaders=c
- ;;
- c_std)
- enable_cheaders=c_std
- ;;
- *) AC_MSG_ERROR([Unknown argument to enable/disable "C" headers])
- ;;
- esac],
- enable_cheaders=GLIBCPP_ENABLE_CHEADERS_DEFAULT)
- AC_MSG_RESULT($enable_cheaders)
-
- dnl Option parsed, now set things appropriately
- case "$enable_cheaders" in
- c_std)
- C_INCLUDE_DIR='${glibcpp_srcdir}/include/c_std'
- ;;
- c)
- C_INCLUDE_DIR='${glibcpp_srcdir}/include/c'
- ;;
- esac
-
- AC_SUBST(C_INCLUDE_DIR)
- AM_CONDITIONAL(GLIBCPP_C_HEADERS_C, test "$enable_cheaders" = c)
- AM_CONDITIONAL(GLIBCPP_C_HEADERS_C_STD, test "$enable_cheaders" = c_std)
- AM_CONDITIONAL(GLIBCPP_C_HEADERS_COMPATIBILITY, test "$c_compatibility" = yes)
-])
-
-
-dnl
-dnl Check for wide character support. Has the same effect as the option
-dnl in gcc's configure, but in a form that autoconf can mess with.
-dnl
-dnl GLIBCPP_ENABLE_C_MBCHAR
-dnl --enable-c-mbchar requests all the wchar_t stuff.
-dnl --disable-c-mbchar doesn't.
-dnl + Usage: GLIBCPP_ENABLE_C_MBCHAR[(DEFAULT)]
-dnl Where DEFAULT is either `yes' or `no'. If ommitted, it
-dnl defaults to `no'.
-AC_DEFUN(GLIBCPP_ENABLE_C_MBCHAR, [dnl
-define([GLIBCPP_ENABLE_C_MBCHAR_DEFAULT], ifelse($1, yes, yes, no))dnl
-AC_ARG_ENABLE(c-mbchar,
-changequote(<<, >>)dnl
-<< --enable-c-mbchar enable multibyte (wide) characters [default=>>GLIBCPP_ENABLE_C_MBCHAR_DEFAULT],
-changequote([, ])dnl
-[case "$enableval" in
- yes) enable_c_mbchar=yes ;;
- no) enable_c_mbchar=no ;;
- *) AC_MSG_ERROR([Unknown argument to enable/disable c-mbchar]) ;;
- esac],
-enable_c_mbchar=GLIBCPP_ENABLE_C_MBCHAR_DEFAULT)dnl
-dnl Option parsed, now other scripts can test enable_c_mbchar for yes/no.
-])
-
-
-dnl
-dnl Set up *_INCLUDES and *_INCLUDE_DIR variables for all sundry Makefile.am's.
-dnl
-dnl TOPLEVEL_INCLUDES
-dnl LIBMATH_INCLUDES
-dnl LIBSUPCXX_INCLUDES
-dnl LIBIO_INCLUDES
-dnl
-dnl GLIBCPP_EXPORT_INCLUDES
-AC_DEFUN(GLIBCPP_EXPORT_INCLUDES, [
- # Root level of the build directory include sources.
- GLIBCPP_INCLUDES="-I${glibcpp_builddir}/include/${target_alias} -I${glibcpp_builddir}/include"
-
- # Passed down for canadian crosses.
- if test x"$CANADIAN" = xyes; then
- TOPLEVEL_INCLUDES='-I$(includedir)'
- fi
-
- LIBMATH_INCLUDES='-I$(top_srcdir)/libmath'
-
- LIBSUPCXX_INCLUDES='-I$(top_srcdir)/libsupc++'
-
- if test x"$need_libio" = xyes; then
- LIBIO_INCLUDES='-I$(top_builddir)/libio -I$(top_srcdir)/libio'
- AC_SUBST(LIBIO_INCLUDES)
- fi
-
- # Now, export this to all the little Makefiles....
- AC_SUBST(GLIBCPP_INCLUDES)
- AC_SUBST(TOPLEVEL_INCLUDES)
- AC_SUBST(LIBMATH_INCLUDES)
- AC_SUBST(LIBSUPCXX_INCLUDES)
-])
-
-
-dnl
-dnl Set up *_FLAGS and *FLAGS variables for all sundry Makefile.am's.
-dnl
-AC_DEFUN(GLIBCPP_EXPORT_FLAGS, [
- # Optimization flags that are probably a good idea for thrill-seekers. Just
- # uncomment the lines below and make, everything else is ready to go...
- # OPTIMIZE_CXXFLAGS = -O3 -fstrict-aliasing -fvtable-gc
- OPTIMIZE_CXXFLAGS=
- AC_SUBST(OPTIMIZE_CXXFLAGS)
-
- WARN_FLAGS='-Wall -Wno-format -W -Wwrite-strings -Winline'
- AC_SUBST(WARN_FLAGS)
-])
-
-dnl
-dnl GLIBCPP_EXPORT_INSTALL_INFO
-dnl calculates gxx_install_dir
-dnl exports glibcpp_toolexecdir
-dnl exports glibcpp_toolexeclibdir
-dnl exports glibcpp_prefixdir
-dnl
-dnl Assumes cross_compiling bits already done, and with_cross_host in
-dnl particular
-dnl
-dnl GLIBCPP_EXPORT_INSTALL_INFO
-AC_DEFUN(GLIBCPP_EXPORT_INSTALL_INFO, [
-# Assumes glibcpp_builddir, glibcpp_srcdir are alreay set up and
-# exported correctly in GLIBCPP_CONFIGURE.
-glibcpp_toolexecdir=no
-glibcpp_toolexeclibdir=no
-glibcpp_prefixdir=${prefix}
-
-# Process the option --with-gxx-include-dir=<path to include-files directory>
-AC_MSG_CHECKING([for --with-gxx-include-dir])
-AC_ARG_WITH(gxx-include-dir,
-[ --with-gxx-include-dir the installation directory for include files],
-[case "${withval}" in
- yes)
- AC_MSG_ERROR(Missing directory for --with-gxx-include-dir)
- gxx_include_dir=no
- ;;
- no)
- gxx_include_dir=no
- ;;
- *)
- gxx_include_dir=${withval}
- ;;
-esac], [gxx_include_dir=no])
-AC_MSG_RESULT($gxx_include_dir)
-
-# Process the option "--enable-version-specific-runtime-libs"
-AC_MSG_CHECKING([for --enable-version-specific-runtime-libs])
-AC_ARG_ENABLE(version-specific-runtime-libs,
-[ --enable-version-specific-runtime-libs Specify that runtime libraries should be installed in a compiler-specific directory ],
-[case "$enableval" in
- yes) version_specific_libs=yes ;;
- no) version_specific_libs=no ;;
- *) AC_MSG_ERROR([Unknown argument to enable/disable version-specific libs]);;
- esac],
-version_specific_libs=no)dnl
-# Option set, now we can test it.
-AC_MSG_RESULT($version_specific_libs)
-
-# Default case for install directory for include files.
-if test $version_specific_libs = no && test $gxx_include_dir = no; then
- gxx_include_dir='$(prefix)'/include/c++/${gcc_version}
-fi
-
-# Version-specific runtime libs processing.
-if test $version_specific_libs = yes; then
- # Need the gcc compiler version to know where to install libraries
- # and header files if --enable-version-specific-runtime-libs option
- # is selected.
- if test x"$gxx_include_dir" = x"no"; then
- gxx_include_dir='$(libdir)/gcc-lib/$(target_alias)/'${gcc_version}/include/c++
- fi
- glibcpp_toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
- glibcpp_toolexeclibdir='$(toolexecdir)/'${gcc_version}'$(MULTISUBDIR)'
-fi
-
-# Calculate glibcpp_toolexecdir, glibcpp_toolexeclibdir
-# Install a library built with a cross compiler in tooldir, not libdir.
-if test x"$glibcpp_toolexecdir" = x"no"; then
- if test -n "$with_cross_host" &&
- test x"$with_cross_host" != x"no"; then
- glibcpp_toolexecdir='$(exec_prefix)/$(target_alias)'
- glibcpp_toolexeclibdir='$(toolexecdir)/lib$(MULTISUBDIR)'
- else
- glibcpp_toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
- glibcpp_toolexeclibdir='$(libdir)$(MULTISUBDIR)'
- fi
-fi
-
-AC_MSG_CHECKING([for install location])
-AC_MSG_RESULT($gxx_include_dir)
-
-AC_SUBST(glibcpp_prefixdir)
-AC_SUBST(gxx_include_dir)
-AC_SUBST(glibcpp_toolexecdir)
-AC_SUBST(glibcpp_toolexeclibdir)
-])
-
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
-# Check for functions in math library.
-# Ulrich Drepper <drepper@cygnus.com>, 1998.
+# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
#
-# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-dnl AC_REPLACE_MATHFUNCS(FUNCTION...)
-AC_DEFUN(AC_REPLACE_MATHFUNCS,
-[AC_CHECK_FUNCS([$1], , [LIBMATHOBJS="$LIBMATHOBJS ${ac_func}.lo"])])
-
-
-dnl This macro searches for a GNU version of make. If a match is found, the
-dnl makefile variable `ifGNUmake' is set to the empty string, otherwise it is
-dnl set to "#". This is useful for including a special features in a Makefile,
-dnl which cannot be handled by other versions of make. The variable
-dnl _cv_gnu_make_command is set to the command to invoke GNU make if it exists,
-dnl the empty string otherwise.
-dnl
-dnl Here is an example of its use:
-dnl
-dnl Makefile.in might contain:
-dnl
-dnl # A failsafe way of putting a dependency rule into a makefile
-dnl $(DEPEND):
-dnl $(CC) -MM $(srcdir)/*.c > $(DEPEND)
-dnl
-dnl @ifGNUmake@ ifeq ($(DEPEND),$(wildcard $(DEPEND)))
-dnl @ifGNUmake@ include $(DEPEND)
-dnl @ifGNUmake@ endif
-dnl
-dnl Then configure.in would normally contain:
-dnl
-dnl CHECK_GNU_MAKE()
-dnl AC_OUTPUT(Makefile)
-dnl
-dnl Then perhaps to cause gnu make to override any other make, we could do
-dnl something like this (note that GNU make always looks for GNUmakefile first):
-dnl
-dnl if ! test x$_cv_gnu_make_command = x ; then
-dnl mv Makefile GNUmakefile
-dnl echo .DEFAULT: > Makefile ;
-dnl echo \ $_cv_gnu_make_command \$@ >> Makefile;
-dnl fi
-dnl
-dnl Then, if any (well almost any) other make is called, and GNU make also
-dnl exists, then the other make wraps the GNU make.
-dnl
-dnl @author John Darrington <j.darrington@elvis.murdoch.edu.au>
-dnl @version 1.1 #### replaced Id string now that Id is for lib-v3; pme
-dnl
-dnl #### Changes for libstdc++-v3: reformatting and linewrapping; prepending
-dnl #### GLIBCPP_ to the macro name; adding the :-make fallback in the
-dnl #### conditional's subshell (" --version" is not a command), using a
-dnl #### different option to grep(1).
-dnl #### -pme
-dnl #### Fixed Bourne shell portability bug (use ${MAKE-make}, not
-dnl #### ${MAKE:-make}).
-dnl #### -msokolov
-AC_DEFUN(
- GLIBCPP_CHECK_GNU_MAKE, [AC_CACHE_CHECK( for GNU make,_cv_gnu_make_command,
- _cv_gnu_make_command='' ;
-dnl Search all the common names for GNU make
- for a in "${MAKE-make}" make gmake gnumake ; do
- if ( $a --version 2> /dev/null | grep -c GNU > /dev/null )
- then
- _cv_gnu_make_command=$a ;
- break;
- fi
- done ;
- ) ;
-dnl If there was a GNU version, then set @ifGNUmake@ to the empty
-dnl string, '#' otherwise
- if test "x$_cv_gnu_make_command" != "x" ; then
- ifGNUmake='' ;
- else
- ifGNUmake='#' ;
- fi
- AC_SUBST(ifGNUmake)
-])
-
-
-dnl Check for headers for, and arguments to, the setrlimit() function.
-dnl Used only in testsuite_hooks.h.
-AC_DEFUN(GLIBCPP_CHECK_SETRLIMIT_ancilliary, [
- AC_TRY_COMPILE([#include <unistd.h>
- #include <sys/time.h>
- #include <sys/resource.h>
- ], [ int f = RLIMIT_$1 ; ],
- [glibcpp_mresult=1], [glibcpp_mresult=0])
- AC_DEFINE_UNQUOTED(HAVE_MEMLIMIT_$1, $glibcpp_mresult,
- [Only used in build directory testsuite_hooks.h.])
-])
-AC_DEFUN(GLIBCPP_CHECK_SETRLIMIT, [
- setrlimit_have_headers=yes
- AC_CHECK_HEADERS(unistd.h sys/time.h sys/resource.h,
- [],
- setrlimit_have_headers=no)
- # If don't have the headers, then we can't run the tests now, and we
- # won't be seeing any of these during testsuite compilation.
- if test $setrlimit_have_headers = yes; then
- # Can't do these in a loop, else the resulting syntax is wrong.
- GLIBCPP_CHECK_SETRLIMIT_ancilliary(DATA)
- GLIBCPP_CHECK_SETRLIMIT_ancilliary(RSS)
- GLIBCPP_CHECK_SETRLIMIT_ancilliary(VMEM)
- GLIBCPP_CHECK_SETRLIMIT_ancilliary(AS)
-
- # Check for rlimit, setrlimit.
- AC_CACHE_VAL(ac_setrlimit, [
- AC_TRY_COMPILE([#include <unistd.h>
- #include <sys/time.h>
- #include <sys/resource.h>
- ],
- [ struct rlimit r; setrlimit(0, &r);],
- [ac_setrlimit=yes], [ac_setrlimit=no])
- ])
- fi
-
- AC_MSG_CHECKING([for testsuite memory limit support])
- if test $setrlimit_have_headers = yes && test $ac_setrlimit = yes; then
- ac_mem_limits=yes
- AC_DEFINE(_GLIBCPP_MEM_LIMITS)
- else
- ac_mem_limits=no
- fi
- AC_MSG_RESULT($ac_mem_limits)
-])
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
-dnl
-dnl Does any necessary configuration of the testsuite directory. Generates
-dnl the testsuite_hooks.h header.
-dnl
-dnl GLIBCPP_CONFIGURE_TESTSUITE [no args]
-AC_DEFUN(GLIBCPP_CONFIGURE_TESTSUITE, [
- GLIBCPP_CHECK_SETRLIMIT
-
- # Look for setenv, so that extended locale tests can be performed.
- GLIBCPP_CHECK_STDLIB_DECL_AND_LINKAGE_3(setenv)
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+ [AM_AUTOMAKE_VERSION([1.9.6])])
- # Export file names for ABI checking.
- baseline_file="${glibcpp_srcdir}/config/abi/${abi_baseline_triplet}/baseline_symbols.txt"
- AC_SUBST(baseline_file)
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
- # Don't do ABI checking unless native.
- AM_CONDITIONAL(GLIBCPP_BUILD_ABI_CHECK,
- test x"$build" = x"$host" && test -z "$with_cross_host")
-])
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
-sinclude(../libtool.m4)
-dnl The lines below arrange for aclocal not to bring an installed
-dnl libtool.m4 into aclocal.m4, while still arranging for automake to
-dnl add a definition of LIBTOOL to Makefile.in.
-ifelse(,,,[AC_SUBST(LIBTOOL)
-AC_DEFUN([AM_PROG_LIBTOOL])
-AC_DEFUN([AC_LIBTOOL_DLOPEN])
-AC_DEFUN([AC_PROG_LD])
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
])
+# AM_CONDITIONAL -*- Autoconf -*-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
#
-# This file file be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-AC_DEFUN(AC_LC_MESSAGES, [
- AC_CHECK_HEADER(locale.h, [
- AC_CACHE_CHECK([for LC_MESSAGES], ac_cv_val_LC_MESSAGES,
- [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
- ac_cv_val_LC_MESSAGES=yes, ac_cv_val_LC_MESSAGES=no)])
- if test $ac_cv_val_LC_MESSAGES = yes; then
- AC_DEFINE(HAVE_LC_MESSAGES)
- fi
- ])
-])
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+# serial 7
-dnl
-dnl Check for whether the Boost-derived checks should be turned on.
-dnl
-dnl GLIBCPP_ENABLE_CONCEPT_CHECKS
-dnl --enable-concept-checks turns them on.
-dnl --disable-concept-checks leaves them off.
-dnl + Usage: GLIBCPP_ENABLE_CONCEPT_CHECKS[(DEFAULT)]
-dnl Where DEFAULT is either `yes' or `no'. If ommitted, it
-dnl defaults to `no'.
-AC_DEFUN(GLIBCPP_ENABLE_CONCEPT_CHECKS, [dnl
-define([GLIBCPP_ENABLE_CONCEPT_CHECKS_DEFAULT], ifelse($1, yes, yes, no))dnl
-AC_ARG_ENABLE(concept-checks,
-changequote(<<, >>)dnl
-<< --enable-concept-checks use Boost-derived template checks [default=>>GLIBCPP_ENABLE_CONCEPT_CHECKS_DEFAULT],
-changequote([, ])dnl
-[case "$enableval" in
- yes) enable_concept_checks=yes ;;
- no) enable_concept_checks=no ;;
- *) AC_MSG_ERROR([Unknown argument to enable/disable concept checks]) ;;
- esac],
-enable_concept_checks=GLIBCPP_ENABLE_CONCEPT_CHECKS_DEFAULT)dnl
-dnl Option parsed, now set things appropriately
-if test x"$enable_concept_checks" = xyes; then
- AC_DEFINE(_GLIBCPP_CONCEPT_CHECKS)
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
fi
-])
-
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
-dnl
-dnl Add version tags to symbols in shared library (or not), additionally
-dnl marking other symbols as private/local (or not).
-dnl
-dnl GLIBCPP_ENABLE_SYMVERS
-dnl --enable-symvers=style adds a version script to the linker call when
-dnl creating the shared library. The choice of version script is
-dnl controlled by 'style'.
-dnl --disable-symvers does not.
-dnl + Usage: GLIBCPP_ENABLE_SYMVERS[(DEFAULT)]
-dnl Where DEFAULT is either `yes' or `no'. If ommitted, it
-dnl defaults to `no'. Passing `yes' tries to choose a default style
-dnl based on linker characteristics. Passing 'no' disables versioning.
-AC_DEFUN(GLIBCPP_ENABLE_SYMVERS, [dnl
-define([GLIBCPP_ENABLE_SYMVERS_DEFAULT], ifelse($1, yes, yes, no))dnl
-AC_ARG_ENABLE(symvers,
-changequote(<<, >>)dnl
-<< --enable-symvers=style enables symbol versioning of the shared library [default=>>GLIBCPP_ENABLE_SYMVERS_DEFAULT],
-changequote([, ])dnl
-[case "$enableval" in
- yes) enable_symvers=yes ;;
- no) enable_symvers=no ;;
- # other names here, just as sanity checks
- #gnu|sun|etcetera) enable_symvers=$enableval ;;
- gnu) enable_symvers=$enableval ;;
- *) AC_MSG_ERROR([Unknown argument to enable/disable symvers]) ;;
- esac],
-enable_symvers=GLIBCPP_ENABLE_SYMVERS_DEFAULT)dnl
-
-# If we never went through the GLIBCPP_CHECK_LINKER_FEATURES macro, then we
-# don't know enough about $LD to do tricks...
-if test x$enable_shared = xno ||
- test "x$LD" = x ||
- test x$glibcpp_gnu_ld_version = x; then
- enable_symvers=no
-fi
+# Do all the work for Automake. -*- Autoconf -*-
-# Check to see if libgcc_s exists, indicating that shared libgcc is possible.
-if test $enable_symvers != no; then
- AC_MSG_CHECKING([for shared libgcc])
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=' -lgcc_s'
- AC_TRY_LINK(, [return 0], glibcpp_shared_libgcc=yes, glibcpp_shared_libgcc=no)
- CFLAGS="$ac_save_CFLAGS"
- AC_MSG_RESULT($glibcpp_shared_libgcc)
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.58])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
-# For GNU ld, we need at least this version. It's 2.12 in the same format
-# as the tested-for version. See GLIBCPP_CHECK_LINKER_FEATURES for more.
-glibcpp_min_gnu_ld_version=21200
-
-# Check to see if unspecified "yes" value can win, given results
-# above.
-if test $enable_symvers = yes ; then
- if test $with_gnu_ld = yes &&
- test $glibcpp_shared_libgcc = yes ;
- then
- if test $glibcpp_gnu_ld_version -ge $glibcpp_min_gnu_ld_version ; then
- enable_symvers=gnu
- else
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS='-shared -Wl,--version-script,conftest.map'
- enable_symvers=no
- changequote(,)
- echo 'FOO { global: f[a-z]o; local: *; };' > conftest.map
- changequote([,])
- AC_TRY_LINK([int foo;],, enable_symvers=gnu)
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- else
- # this is the suspicious part
- CFLAGS=''
- fi
- rm -f conftest.map
- fi
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
else
- # just fail for now
- enable_symvers=no
+ CYGPATH_W=echo
fi
fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $1 | $1:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-dnl Everything parsed; figure out what file to use.
-case $enable_symvers in
- no)
- SYMVER_MAP=config/linker-map.dummy
- ;;
- gnu)
- SYMVER_MAP=config/linker-map.gnu
- AC_DEFINE(_GLIBCPP_SYMVER)
- ;;
-esac
-
-AC_SUBST(SYMVER_MAP)
-AM_CONDITIONAL(GLIBCPP_BUILD_VERSIONED_SHLIB, test $enable_symvers != no)
-AC_MSG_CHECKING([versioning on shared library symbols])
-AC_MSG_RESULT($enable_symvers)
-])
-
-
-# isc-posix.m4 serial 2 (gettext-0.11.2)
-dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
-dnl This file is free software, distributed under the terms of the GNU
-dnl General Public License. As a special exception to the GNU General
-dnl Public License, this file may be distributed as part of a program
-dnl that contains a configuration script generated by Autoconf, under
-dnl the same distribution terms as the rest of that program.
-
-# This file is not needed with autoconf-2.53 and newer. Remove it in 2005.
-
-# This test replaces the one in autoconf.
-# Currently this macro should have the same name as the autoconf macro
-# because gettext's gettext.m4 (distributed in the automake package)
-# still uses it. Otherwise, the use in gettext.m4 makes autoheader
-# give these diagnostics:
-# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
-# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
-
-undefine([AC_ISC_POSIX])
-
-AC_DEFUN([AC_ISC_POSIX],
- [
- dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
- AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
- ]
-)
-
-# Add --enable-maintainer-mode option to configure.
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
# From Jim Meyering
-# serial 1
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
AC_DEFUN([AM_MAINTAINER_MODE],
[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
dnl maintainer-mode is disabled by default
AC_ARG_ENABLE(maintainer-mode,
-[ --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer],
+[ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer],
USE_MAINTAINER_MODE=$enableval,
USE_MAINTAINER_MODE=no)
- AC_MSG_RESULT($USE_MAINTAINER_MODE)
- AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST(MAINT)dnl
]
)
-# Define a conditional.
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-AC_DEFUN([AM_CONDITIONAL],
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi])
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Do all the work for Automake. This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# serial 1
+# serial 4
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-# Copyright 2002 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+])
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
+# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# AM_PROG_MKDIR_P
+# ---------------
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+#
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake. There are at least two reasons why we must not
+# use `-m 0755':
+# - it causes special bits like SGID to be ignored,
+# - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out. Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
+AC_DEFUN([AM_PROG_MKDIR_P],
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
+ else
+ mkdir_p='$(install_sh) -d'
+ fi
+fi
+AC_SUBST([mkdir_p])])
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
+# Copyright (C) 1998, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_ENABLE_MULTILIB([MAKEFILE], [REL-TO-TOP-SRCDIR])
+# ---------------------------------------------------
+# Add --enable-multilib to configure.
+AC_DEFUN([AM_ENABLE_MULTILIB],
+[# Default to --enable-multilib
+AC_ARG_ENABLE(multilib,
+[ --enable-multilib build many library versions (default)],
+[case "$enableval" in
+ yes) multilib=yes ;;
+ no) multilib=no ;;
+ *) AC_MSG_ERROR([bad value $enableval for multilib option]) ;;
+ esac],
+ [multilib=yes])
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.4-p6])])
+# We may get other options which we leave undocumented:
+# --with-target-subdir, --with-multisrctop, --with-multisubdir
+# See config-ml.in if you want the gory details.
+if test "$srcdir" = "."; then
+ if test "$with_target_subdir" != "."; then
+ multi_basedir="$srcdir/$with_multisrctop../$2"
+ else
+ multi_basedir="$srcdir/$with_multisrctop$2"
+ fi
+else
+ multi_basedir="$srcdir/$2"
+fi
+AC_SUBST(multi_basedir)
+
+AC_OUTPUT_COMMANDS([
+# Only add multilib support code if we just rebuilt the top-level
+# Makefile.
+case " $CONFIG_FILES " in
+ *" ]m4_default([$1],Makefile)[ "*)
+ ac_file=]m4_default([$1],Makefile)[ . ${multi_basedir}/config-ml.in
+ ;;
+esac],
+ [
+srcdir="$srcdir"
+host="$host"
+target="$target"
+with_multisubdir="$with_multisubdir"
+with_multisrctop="$with_multisrctop"
+with_target_subdir="$with_target_subdir"
+ac_configure_args="${multilib_arg} ${ac_configure_args}"
+multi_basedir="$multi_basedir"
+CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+CC="$CC"])])dnl
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
#
-# Check to make sure that the build environment is sane.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
-echo timestamp > conftestfile
+echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "[$]*" = "X"; then
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
# -L didn't work.
- set X `ls -t $srcdir/configure conftestfile`
+ set X `ls -t $srcdir/configure conftest.file`
fi
- if test "[$]*" != "X $srcdir/configure conftestfile" \
- && test "[$]*" != "X conftestfile $srcdir/configure"; then
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
alias in your environment])
fi
- test "[$]2" = conftestfile
+ test "$[2]" = conftest.file
)
then
# Ok.
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
-rm -f conftest*
AC_MSG_RESULT(yes)])
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN([AM_MISSING_PROG],
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
- $1=$2
- AC_MSG_RESULT(found)
-else
- $1="$3/missing $2"
- AC_MSG_RESULT(missing)
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
fi
-AC_SUBST($1)])
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Like AC_CONFIG_HEADER, but automatically create stamp file.
-
-AC_DEFUN([AM_CONFIG_HEADER],
-[AC_PREREQ([2.12])
-AC_CONFIG_HEADER([$1])
-dnl When config.status generates a header, we must update the stamp-h file.
-dnl This file resides in the same directory as the config header
-dnl that is generated. We must strip everything past the first ":",
-dnl and everything past the last "/".
-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
-<<am_indx=1
-for am_file in <<$1>>; do
- case " <<$>>CONFIG_HEADERS " in
- *" <<$>>am_file "*<<)>>
- echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
;;
esac
- am_indx=`expr "<<$>>am_indx" + 1`
-done<<>>dnl>>)
-changequote([,]))])
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../config/enable.m4])
+m4_include([../config/lead-dot.m4])
+m4_include([../config/no-executables.m4])
+m4_include([../config/unwind_ipinfo.m4])
+m4_include([../libtool.m4])
+m4_include([crossconfig.m4])
+m4_include([linkage.m4])
+m4_include([acinclude.m4])
OSDN Git Service
