dnl
dnl Initialize configure bits.
dnl
-dnl Define OPTLEVEL='-O2' if new inlining code present.
-dnl
dnl GLIBCPP_CONFIGURE
AC_DEFUN(GLIBCPP_CONFIGURE, [
dnl Default to --enable-multilib
*) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
esac], [multilib=yes])dnl
- glibcpp_basedir=$auxdir/$1/libstdc++-v3
+ glibcpp_basedir=$srcdir/$toprel/$1/libstdc++-v3
AC_SUBST(glibcpp_basedir)
- AM_INIT_AUTOMAKE(libstdc++, 2.90.8)
+ AM_INIT_AUTOMAKE(libstdc++, 3.0.0)
# Never versions of autoconf add an underscore to these functions.
# Prevent future problems ...
[AC_BEFORE([$0], [AC_PROG_CXXCPP])dnl
dnl Fool anybody using AC_PROG_CXX.
AC_PROVIDE([AC_PROG_CXX])
-# Use CXX_libstdcxx so that we do not cause CXX to be cached with the
+# Use glibcpp_CXX so that we do not cause CXX to be cached with the
# flags that come in CXX while configuring libstdc++. They're different
# from those used for all other target libraries. If CXX is set in
# the environment, respect that here.
-CXX_libstdcxx=$CXX
-AC_CHECK_PROGS(CXX_libstdcxx, $CCC c++ g++ gcc CC cxx cc++, gcc)
-CXX=$CXX_libstdcxx
-AC_SUBST(CXX)
-test -z "$CXX" && AC_MSG_ERROR([no acceptable c++ found in \$PATH])
+glibcpp_CXX=$CXX
+AC_CHECK_PROGS(glibcpp_CXX, $CCC c++ g++ gcc CC cxx cc++, gcc)
+AC_SUBST(glibcpp_CXX)
+CXX=$glibcpp_CXX
+test -z "$glibcpp_CXX" && AC_MSG_ERROR([no acceptable c++ found in \$PATH])
AC_PROG_CXX_GNU
AC_CHECK_TOOL(AS, as)
AC_CHECK_TOOL(AR, ar)
- AC_CHECK_TOOL(RANLIB, ranlib, :)
-
+ AC_CHECK_TOOL(RANLIB, ranlib, ranlib-not-found-in-path-error)
AC_PROG_INSTALL
AM_MAINTAINER_MODE
# automake happy, but we dont execute it, since we dont care about
# the result.
if false; then
+ # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
+ # to nothing, so nothing would remain between `then' and `fi' if it
+ # were not for the `:' below.
+ :
AC_EXEEXT
fi
- # configure.host sets the following important variables
- # glibcpp_cflags - host specific C compiler flags
- # glibcpp_cxxflags - host specific C++ compiler flags
- glibcpp_cflags=
- glibcpp_cxxflags=
-
. [$]{glibcpp_basedir}/configure.host
case [$]{glibcpp_basedir} in
esac
# This does for the target what configure.host does for the host. In
- # addition to modifying the same flags, it also sets up symlinks.
+ # addition to possibly modifying the same flags, it also sets up symlinks.
GLIBCPP_CHECK_TARGET
-
- GLIBCPP_CFLAGS="[$]{glibcpp_cflags}"
- GLIBCPP_CXXFLAGS="[$]{glibcpp_cxxflags}"
- AC_SUBST(GLIBCPP_CFLAGS)
- AC_SUBST(GLIBCPP_CXXFLAGS)
])
AC_MSG_CHECKING([for g++ that will successfully compile libstdc++-v3])
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
- AC_EGREP_CPP(ok, [
- #if (__GNUC__ > 2) || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
- ok
+ AC_TRY_COMPILE(, [
+ #if __GNUC__ < 3
+ not_ok
#endif
- ], gpp_satisfactory=yes, AC_MSG_ERROR([please upgrade to gcc-2.95 or above]))
+ ], gpp_satisfactory=yes, AC_MSG_ERROR([please upgrade to GCC 3.0 or above]))
AC_LANG_RESTORE
AC_MSG_RESULT($gpp_satisfactory)
touch stamp-sanity-compiler
dnl
-dnl Test for newer compiler features, or features that are present in newer
-dnl compiler version but not older compiler versions should be placed
-dnl here.
+dnl Tests for newer compiler features, or features that are present in newer
+dnl compiler versions but not older compiler versions still in use, should
+dnl be placed here.
dnl
-dnl Define WFMT_FLAGS='-fdiagnostics-show-location=once' if possible
-dnl
dnl Define WERROR='-Werror' if requested and possible; g++'s that lack the
dnl new inlining code or the new system_header pragma will die on -Werror.
dnl Leave it out by default and use maint-mode to use it.
dnl
dnl Define SECTION_FLAGS='-ffunction-sections -fdata-sections' if
-dnl compiler supports it.
+dnl compiler supports it and the user has not requested debug mode.
+dnl
dnl GLIBCPP_CHECK_COMPILER_FEATURES
AC_DEFUN(GLIBCPP_CHECK_COMPILER_FEATURES, [
# All these tests are for C++; save the language and the compiler flags.
- # The CXXFLAGS thing is suspicious, but based on similar bits
+ # The CXXFLAGS thing is suspicious, but based on similar bits previously
# found in GLIBCPP_CONFIGURE.
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
WERROR='-Werror'
fi
- # Check for more sophisticated diagnostic control.
- AC_MSG_CHECKING([for g++ that supports -fdiagnostics-show-location=once])
- CXXFLAGS='-Werror -fdiagnostics-show-location=once'
- AC_TRY_COMPILE(, [int foo;
- ], [ac_gabydiags=yes], [ac_gabydiags=no])
- if test "$ac_test_CXXFLAGS" = set; then
- CXXFLAGS="$ac_save_CXXFLAGS"
- else
- # this is the suspicious part
- CXXFLAGS=''
- fi
- if test x"$ac_gabydiags" = x"yes"; then
- WFMT_FLAGS='-fdiagnostics-show-location=once'
- fi
- AC_MSG_RESULT($ac_gabydiags)
-
# Check for -ffunction-sections -fdata-sections
AC_MSG_CHECKING([for g++ that supports -ffunction-sections -fdata-sections])
CXXFLAGS='-Werror -ffunction-sections -fdata-sections'
# this is the suspicious part
CXXFLAGS=''
fi
- if test x"$ac_fdsections" = x"yes" && test x"$enable_debug" = x"no"; then
+ if test x"$ac_fdsections" = x"yes" &&
+ test x"$enable_debug" = x"no"; then
SECTION_FLAGS='-ffunction-sections -fdata-sections'
fi
AC_MSG_RESULT($ac_fdsections)
AC_LANG_RESTORE
AC_SUBST(WERROR)
- AC_SUBST(WFMT_FLAGS)
AC_SUBST(SECTION_FLAGS)
])
fi
# Set linker optimization flags.
- if test x"$ac_cv_prog_gnu_ld" = x"yes" && test x"$enable_debug" = x"no"; then
+ if test x"$ac_cv_prog_gnu_ld" = x"yes" &&
+ test x"$enable_debug" = x"no"; then
OPT_LDFLAGS='-Wl,-O1'
fi
AC_CACHE_VAL(glibcpp_cv_func_$1_use, [
AC_LANG_SAVE
AC_LANG_CPLUSPLUS
- AC_TRY_COMPILE([#include <math.h>],
+ AC_TRY_COMPILE([#include <math.h>
+ #ifdef HAVE_IEEEFP_H
+ #include <ieeefp.h>
+ #endif
+ ],
[ $1(0);],
[glibcpp_cv_func_$1_use=yes], [glibcpp_cv_func_$1_use=no])
AC_LANG_RESTORE
GLIBCPP_CHECK_MATH_DECL_1(_$1)
if test x$glibcpp_cv_func__$1_use = x"yes"; then
AC_CHECK_FUNCS(_$1)
- fi
+ fi
fi
])
dnl
dnl Check to see if the (math function) argument passed is
dnl declared when using the c++ compiler
-dnl ASSUMES argument is a math function with ONE parameter
+dnl ASSUMES argument is a math function with TWO parameters
dnl
dnl GLIBCPP_CHECK_MATH_DECL_2
AC_DEFUN(GLIBCPP_CHECK_MATH_DECL_2, [
GLIBCPP_CHECK_MATH_DECL_2(_$1)
if test x$glibcpp_cv_func__$1_use = x"yes"; then
AC_CHECK_FUNCS(_$1)
- fi
+ fi
fi
])
dnl
dnl Check to see if the (math function) argument passed is
dnl declared when using the c++ compiler
-dnl ASSUMES argument is a math function with ONE parameter
+dnl ASSUMES argument is a math function with THREE parameters
dnl
dnl GLIBCPP_CHECK_MATH_DECL_3
AC_DEFUN(GLIBCPP_CHECK_MATH_DECL_3, [
GLIBCPP_CHECK_MATH_DECL_3(_$1)
if test x$glibcpp_cv_func__$1_use = x"yes"; then
AC_CHECK_FUNCS(_$1)
- fi
+ fi
fi
])
dnl 1) declared when using the c++ compiler
dnl 2) has "C" linkage
dnl
-dnl Define HAVE_STRTOLD if "strtold" is declared and links
-dnl Define HAVE_STRTOF if "strtof" is declared and links
-dnl
dnl argument 1 is name of function to check
dnl
dnl ASSUMES argument is a math function with TWO parameters
dnl 2) make sure the name has "C" linkage
dnl This might seem like overkill but experience has shown that it's not...
dnl
-dnl Define HAVE_STRTOF etc if "strtof" is found.
-dnl Define HAVE_STRTOLD etc if "strtold" is found.
+dnl Define HAVE_STRTOLD if "strtold" is declared and links
+dnl Define HAVE_STRTOF if "strtof" is declared and links
+dnl Define HAVE_DRAND48 if "drand48" is declared and links
dnl
dnl GLIBCPP_CHECK_STDLIB_SUPPORT
AC_DEFUN(GLIBCPP_CHECK_STDLIB_SUPPORT, [
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS='-fno-builtins -D_GNU_SOURCE'
- AC_CHECK_FUNCS(strtof)
GLIBCPP_CHECK_STDLIB_DECL_AND_LINKAGE_2(strtold)
+ AC_CHECK_FUNCS(drand48)
CXXFLAGS="$ac_save_CXXFLAGS"
])
dnl Currently this includes copysignl and atan2l, which should be
dnl cached from the GLIBCPP_CHECK_MATH_SUPPORT macro, above.
USE_COMPLEX_LONG_DOUBLE=no
- if test x$ac_cv_func_atan2l = x"yes" \
- && test x$ac_cv_func_copysignl = x"yes"; then
+ if test x$ac_cv_func_atan2l = x"yes" &&
+ test x$ac_cv_func_copysignl = x"yes"; then
USE_COMPLEX_LONG_DOUBLE=yes
AC_REPLACE_MATHFUNCS(hypotl signbitl)
fi
AC_CHECK_HEADER(wctype.h, ac_has_wctype_h=yes, ac_has_wctype_h=no)
dnl Only continue checking if the ISO C99 headers exist and support is on.
- if test x"$ac_has_wchar_h" = xyes && test x"$ac_has_wctype_h" = xyes \
- && test x"$enable_c_mbchar" != xno; then
+ if test x"$ac_has_wchar_h" = xyes &&
+ test x"$ac_has_wctype_h" = xyes &&
+ test x"$enable_c_mbchar" != xno; then
dnl Test wchar.h for WCHAR_MIN, WCHAR_MAX, which is needed before
dnl numeric_limits can instantiate type_traits<wchar_t>
AC_MSG_RESULT($has_weof)
dnl Tests for wide character functions used in char_traits<wchar_t>.
- AC_CHECK_FUNCS(wcslen wmemchr wmemcmp wmemcpy wmemmove wmemset \
- wcsrtombs mbsrtowcs, ac_wfuncs=yes, ac_wfuncs=no)
+ ac_wfuncs=yes
+ AC_CHECK_FUNCS(wcslen wmemchr wmemcmp wmemcpy wmemmove wmemset,, \
+ ac_wfuncs=no)
+ dnl Checks for names injected into std:: by the c_std headers.
+ AC_CHECK_FUNCS(btowc wctob fgetwc fgetwc fgetws fputwc fputws fwide \
+ fwprintf fwscanf swprintf swscanf vfwprintf vfwscanf vswprintf vswscanf \
+ vwprintf vwscanf wprintf wscanf getwc getwchar mbsinit mbrlen mbrtowc \
+ mbsrtowcs wcsrtombs putwc putwchar ungetwc wcrtomb wcstod wcstof wcstol \
+ wcstoul wcscpy wcsncpy wcscat wcsncat wcscmp wcscoll wcsncmp wcsxfrm \
+ wcscspn wcsspn wcstok wcsftime wcschr wcspbrk wcsrchr wcsstr,, \
+ ac_wfuncs=no)
+
AC_MSG_CHECKING([for ISO C99 wchar_t support])
- if test x"$has_weof" = xyes && test x"$has_wchar_minmax" = xyes \
- && test x"$ac_wfuncs" = xyes; then
+ if test x"$has_weof" = xyes &&
+ test x"$has_wchar_minmax" = xyes &&
+ test x"$ac_wfuncs" = xyes; then
ac_isoC99_wchar_t=yes
else
ac_isoC99_wchar_t=no
LIBS="$ac_save_LIBS"
AC_MSG_CHECKING([for XPG2 wchar_t support])
- if test x"$ac_has_iconv_h" = xyes && test x"$ac_has_langinfo_h" = xyes \
- && test x"$ac_XPG2funcs" = xyes; then
+ if test x"$ac_has_iconv_h" = xyes &&
+ test x"$ac_has_langinfo_h" = xyes &&
+ test x"$ac_XPG2funcs" = xyes; then
ac_XPG2_wchar_t=yes
else
ac_XPG2_wchar_t=no
dnl At the moment, only enable wchar_t specializations if all the
dnl above support is present.
AC_MSG_CHECKING([for enabled wchar_t specializations])
- if test x"$ac_isoC99_wchar_t" = xyes \
- && test x"$ac_XPG2_wchar_t" = xyes; then
- libinst_wstring_la="libinst-wstring.la"
+ if test x"$ac_isoC99_wchar_t" = xyes &&
+ test x"$ac_XPG2_wchar_t" = xyes; then
AC_DEFINE(_GLIBCPP_USE_WCHAR_T)
AC_MSG_RESULT("yes")
else
- libinst_wstring_la=""
AC_MSG_RESULT("no")
fi
- AC_SUBST(libinst_wstring_la)
-
else
dnl Wide characters disabled by the user.
AC_MSG_WARN([wchar_t support disabled.])
dnl
-dnl Check to see if this version of GNU C++ is afflicted by bugs in
-dnl __complex__ float support.
-dnl
-dnl Define _GLIBCPP_BUGGY_FLOAT_COMPLEX if buggy.
-dnl
-dnl Check to see if this version of GNU C++ is afflicted by bugs in
-dnl __complex__ support.Check for buggy __complex__ that will cause ICE in
-dnl gcc-2.95.x when using the library, unless we define the default copy
-dnl ctor in the specializations of complex<>.
-dnl
-dnl Define _GLIBCPP_BUGGY_COMPLEX if buggy.
-dnl GLIBCPP_CHECK_COMPLEX_MATH_COMPILER_SUPPORT
-AC_DEFUN(GLIBCPP_CHECK_COMPLEX_MATH_COMPILER_SUPPORT, [
- AC_REQUIRE([AC_PROG_CXX])
-
- AC_MSG_CHECKING([for GNU C++ __complex__ support])
- AC_CACHE_VAL(glibcpp_cv_complex, [
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- AC_TRY_COMPILE([struct dcomplex { __complex__ double x; }; \
- dcomplex f(const dcomplex& x) { return dcomplex(x); }], \
- [ dcomplex x; f(x); ],
- glibcpp_cv_complex=ok,
- glibcpp_cv_complex=buggy
- )
- AC_LANG_RESTORE
- ])
- AC_MSG_RESULT($glibcpp_cv_complex)
- if test $glibcpp_cv_complex = buggy; then
- AC_DEFINE(_GLIBCPP_BUGGY_COMPLEX)
- fi
-
- AC_MSG_CHECKING([for GNU C++ __complex__ float support])
- AC_CACHE_VAL(glibcpp_cv_float_complex, [
- AC_LANG_SAVE
- AC_LANG_CPLUSPLUS
- rm -f conftest.h
- cat > conftest.h <<EOB
- //
- // Check for buggy __complex__ that causes ICE in most versions of egcs
- // and gcc-2.95.x on certain platforms (eg., x86-win32).
- //
- // See http://gcc.gnu.org/ml/gcc-bugs/1999-07n/msg00845.html for
- // more info on the bug itself.
- //
- struct
- float_complex
- {
- __complex__ float m_value;
- float_complex (float = 0.0f, float = 0.0f);
- float_complex (__complex__ float val) : m_value (val) {}
- float_complex foo (const float_complex &val)
- { return float_complex (~val.m_value); }
- };
-EOB
- AC_TRY_COMPILE([#include "conftest.h"], ,
- glibcpp_cv_float_complex=ok,
- glibcpp_cv_float_complex=buggy
- )
- AC_LANG_RESTORE
- ])
- AC_MSG_RESULT($glibcpp_cv_float_complex)
- if test $glibcpp_cv_float_complex = buggy; then
- AC_DEFINE(_GLIBCPP_BUGGY_FLOAT_COMPLEX)
- fi
-])
-
-
-dnl
dnl Check for special debugging mode; not for production use.
dnl
dnl GLIBCPP_ENABLE_DEBUG
AC_DEFUN(GLIBCPP_ENABLE_CLOCALE, [
AC_MSG_CHECKING([for clocale to use])
AC_ARG_ENABLE(clocale,
- [ --enable-clocale enable model for target locale package.
- --enable-clocale=MODEL use MODEL target-speific locale package. [default=generic]
+ [ --enable-clocale enable model for target locale package.
+ --enable-clocale=MODEL use MODEL target-speific locale package. [default=generic]
],
if test x$enable_clocale = xno; then
enable_clocale=generic
AC_DEFUN(GLIBCPP_ENABLE_CSTDIO, [
AC_MSG_CHECKING([for cstdio to use])
AC_ARG_ENABLE(cstdio,
- [ --enable-cstdio enable stdio for target io package.
- --enable-cstdio=LIB use LIB target-speific io package. [default=stdio]
+ [ --enable-cstdio enable stdio for target io package.
+ --enable-cstdio=LIB use LIB target-speific io package. [default=stdio]
],
if test x$enable_cstdio = xno; then
enable_cstdio=stdio
case x${enable_cstdio_flag} in
xlibio)
CSTDIO_H=config/c_io_libio.h
- CSTDIO_CC=config/c_io_libio.cc
+ BASIC_FILE_H=config/basic_file_libio.h
+ BASIC_FILE_CC=config/basic_file_libio.cc
AC_MSG_RESULT(libio)
# see if we are on a system with libio native (ie, linux)
xstdio | x | xno | xnone | xyes)
# default
CSTDIO_H=config/c_io_stdio.h
- CSTDIO_CC=config/c_io_stdio.cc
+ BASIC_FILE_H=config/basic_file_stdio.h
+ BASIC_FILE_CC=config/basic_file_stdio.cc
AC_MSG_RESULT(stdio)
# We're not using stdio.
need_libio=no
need_wlibio=no
- # Wide characters are not supported with this package.
- enable_c_mbchar=no
;;
*)
echo "$enable_cstdio is an unknown io package" 1>&2
;;
esac
AC_LINK_FILES($CSTDIO_H, include/bits/c++io.h)
- AC_LINK_FILES($CSTDIO_CC, src/c++io.cc)
+ AC_LINK_FILES($BASIC_FILE_H, include/bits/basic_file_model.h)
+ AC_LINK_FILES($BASIC_FILE_CC, src/basic_file.cc)
# 2000-08-04 bkoz hack
CCODECVT_C=config/c_io_libio_codecvt.c
dnl
-dnl Check for which threading library to use.
-dnl
-dnl GLIBCPP_ENABLE_THREADS
-dnl --enable-threads=posix sets config/threads-posix.h et. al.
-dnl
-dnl Default is no threads, which also disables _IO_MTSAFE_IO in
-dnl libio. Any actual thread package will enable it.
+dnl Setup to use the gcc gthr.h thread-specific memory and mutex model.
+dnl We must stage the required headers so that they will be installed
+dnl with the library (unlike libgcc, the STL implementation is provided
+dnl solely within headers). Since we must not inject random user-space
+dnl macro names into user-provided C++ code, we first stage into <file>-in
+dnl and process to <file> with an output command. The reason for a two-
+dnl stage process here is to correctly handle $srcdir!=$objdir without
+dnl having to write complex code (the sed commands to clean the macro
+dnl namespace are complex and fragile enough as it is). We must also
+dnl add a relative path so that -I- is supported properly.
dnl
AC_DEFUN(GLIBCPP_ENABLE_THREADS, [
- dnl Note this comes from the gcc/config.in and libjava/config.in
- dnl Efforts should be made to keep this in sync.
- AC_MSG_CHECKING([for threads package to use])
- AC_ARG_ENABLE(threads,
- [ --enable-threads enable thread usage for target GCC.
- --enable-threads=LIB use LIB thread package for target GCC. [default=no]
- ],
- if test x$enable_threads = xno; then
- enable_threads=''
- fi,
- enable_threads='')
-
- enable_threads_flag=$enable_threads
-
- dnl Check if a valid thread package
- case x${enable_threads_flag} in
- x | xno | xnone)
- # No threads
- target_thread_file='single'
- ;;
- xyes)
- # default
- target_thread_file='posix'
- ;;
- xdecosf1 | xirix | xmach | xos2 | xposix | xpthreads | xsingle | \
- xsolaris | xwin32 | xdce | xvxworks)
- target_thread_file=$enable_threads_flag
- ;;
- *)
- echo "$enable_threads is an unknown thread package" 1>&2
- exit 1
- ;;
- esac
+ AC_MSG_CHECKING([for thread model used by GCC])
+ target_thread_file=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
+ AC_MSG_RESULT([$target_thread_file])
+
+ AC_LINK_FILES($toprel/gcc/gthr.h, include/bits/gthr.h-in)
+ AC_LINK_FILES($toprel/gcc/gthr-single.h,
+ include/bits/gthr-single.h-in)
+ AC_LINK_FILES($toprel/gcc/gthr-$target_thread_file.h,
+ include/bits/gthr-default.h-in)
+ if test $target_thread_file != single; then
+ AC_DEFINE(HAVE_GTHR_DEFAULT)
+ AC_DEFINE(_GLIBCPP_SUPPORTS_WEAK, __GXX_WEAK__)
+ fi
+ AC_OUTPUT_COMMANDS([d=include/bits
+ rm -f $d/gthr.h $d/gthr-single.h $d/gthr-default.h
+ sed '/^#/s/\([A-Z_][A-Z_]*\)/_GLIBCPP_\1/g' <$d/gthr.h-in \
+ | sed 's,"gthr-,"bits/gthr-,' >$d/gthr.h
+ sed 's/\(UNUSED\)/_GLIBCPP_\1/g' <$d/gthr-single.h-in \
+ | sed 's/\(GCC[A-Z_]*_H\)/_GLIBCPP_\1/g' >$d/gthr-single.h
+ sed 's/\(UNUSED\)/_GLIBCPP_\1/g' <$d/gthr-default.h-in \
+ | sed 's/\(GCC[A-Z_]*_H\)/_GLIBCPP_\1/g' \
+ | sed 's/\([A-Z_]*WEAK\)/_GLIBCPP_\1/g' >$d/gthr-default.h])
+])
- dnl Check for thread package actually supported in libstdc++
- THREADH=
- case "$target_thread_file" in
- no | none | single)
- THREADH=threads-no.h
- ;;
- posix | pthreads)
- THREADH=threads-posix.h
- ;;
- decosf1 | irix | mach | os2 | solaris | win32 | dce | vxworks)
- AC_MSG_ERROR(thread package $THREADS not yet supported)
- ;;
- *)
- AC_MSG_ERROR($THREADS is an unsupported/unknown thread package)
- ;;
- esac
- AC_MSG_RESULT($THREADH)
- AC_LINK_FILES(config/$THREADH, include/bits/c++threads.h)
- if test $THREADH != threads-no.h; then
- AC_DEFINE(_GLIBCPP_USE_THREADS)
+dnl
+dnl Check for exception handling support. If an explicit enable/disable
+dnl sjlj exceptions is given, we don't have to detect. Otherwise the
+dnl target may or may not support call frame exceptions.
+dnl
+dnl GLIBCPP_ENABLE_SJLJ_EXCEPTIONS
+dnl --enable-sjlj-exceptions forces the use of builtin setjmp.
+dnl --disable-sjlj-exceptions forces the use of call frame unwinding.
+dnl
+dnl Define _GLIBCPP_SJLJ_EXCEPTIONS if the compiler is configured for it.
+dnl
+AC_DEFUN(GLIBCPP_ENABLE_SJLJ_EXCEPTIONS, [
+ AC_MSG_CHECKING([for exception model to use])
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_ARG_ENABLE(sjlj-exceptions,
+ [ --enable-sjlj-exceptions force use of builtin_setjmp for exceptions],
+ [:],
+ [dnl Botheration. Now we've got to detect the exception model.
+ dnl Link tests against libgcc.a are problematic since -- at least
+ dnl as of this writing -- we've not been given proper -L bits for
+ dnl single-tree newlib and libgloss.
+ dnl
+ dnl This is what AC_TRY_COMPILE would do if it didn't delete the
+ dnl conftest files before we got a change to grep them first.
+ cat > conftest.$ac_ext << EOF
+[#]line __oline__ "configure"
+struct S { ~S(); };
+void bar();
+void foo()
+{
+ S s;
+ bar();
+}
+EOF
+ old_CXXFLAGS="$CXXFLAGS"
+ CXXFLAGS=-S
+ if AC_TRY_EVAL(ac_compile); then
+ if grep _Unwind_SjLj_Resume conftest.s >/dev/null 2>&1 ; then
+ enable_sjlj_exceptions=yes
+ elif grep _Unwind_Resume conftest.s >/dev/null 2>&1 ; then
+ enable_sjlj_exceptions=no
+ fi
+ fi
+ CXXFLAGS="$old_CXXFLAGS"
+ rm -f conftest*])
+ if test x$enable_sjlj_exceptions = xyes; then
+ AC_DEFINE(_GLIBCPP_SJLJ_EXCEPTIONS, 1,
+ [Define if the compiler is configured for setjmp/longjmp exceptions.])
+ ac_exception_model_name=sjlj
+ elif test x$enable_sjlj_exceptions = xno; then
+ ac_exception_model_name="call frame"
+ else
+ AC_MSG_ERROR([unable to detect exception model])
+ fi
+ AC_LANG_RESTORE
+ AC_MSG_RESULT($ac_exception_model_name)
+])
+
+
+dnl
+dnl Check for ISO/IEC 9899:1999 "C99" support.
+dnl
+dnl GLIBCPP_ENABLE_C99
+dnl --enable-c99 defines _GLIBCPP_USE_C99
+dnl --disable-c99 leaves _GLIBCPP_USE_C99 undefined
+dnl + Usage: GLIBCPP_ENABLE_C99[(DEFAULT)]
+dnl Where DEFAULT is either `yes' or `no'. If omitted, it
+dnl defaults to `no'.
+dnl + If 'C99' stuff is not available, ignores DEFAULT and sets `no'.
+dnl
+dnl GLIBCPP_ENABLE_C99
+AC_DEFUN(GLIBCPP_ENABLE_C99, [dnl
+ define([GLIBCPP_ENABLE_C99_DEFAULT], ifelse($1, yes, yes, no))dnl
+
+ AC_ARG_ENABLE(c99,
+ changequote(<<, >>)dnl
+ <<--enable-c99 turns on 'ISO/IEC 9899:1999 support' [default=>>GLIBCPP_ENABLE_C99_DEFAULT],
+ changequote([, ])dnl
+ [case "$enableval" in
+ yes) enable_c99=yes ;;
+ no) enable_c99=no ;;
+ *) AC_MSG_ERROR([Unknown argument to enable/disable C99]) ;;
+ esac],
+ enable_c99=GLIBCPP_ENABLE_C99_DEFAULT)dnl
+
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+
+ # Check for the existence of <math.h> functions used if C99 is enabled.
+ ac_c99_math=yes;
+ AC_MSG_CHECKING([for ISO C99 support in <math.h>])
+ AC_TRY_COMPILE([#include <math.h>],[fpclassify(0.0);],, [ac_c99_math=no])
+ AC_TRY_COMPILE([#include <math.h>],[isfinite(0.0);],, [ac_c99_math=no])
+ AC_TRY_COMPILE([#include <math.h>],[isinf(0.0);],, [ac_c99_math=no])
+ AC_TRY_COMPILE([#include <math.h>],[isnan(0.0);],, [ac_c99_math=no])
+ AC_TRY_COMPILE([#include <math.h>],[isnormal(0.0);],, [ac_c99_math=no])
+ AC_TRY_COMPILE([#include <math.h>],[signbit(0.0);],, [ac_c99_math=no])
+ AC_TRY_COMPILE([#include <math.h>],[isgreater(0.0,0.0);],, [ac_c99_math=no])
+ AC_TRY_COMPILE([#include <math.h>],
+ [isgreaterequal(0.0,0.0);],, [ac_c99_math=no])
+ AC_TRY_COMPILE([#include <math.h>],[isless(0.0,0.0);],, [ac_c99_math=no])
+ AC_TRY_COMPILE([#include <math.h>],[islessequal(0.0,0.0);],,[ac_c99_math=no])
+ AC_TRY_COMPILE([#include <math.h>],
+ [islessgreater(0.0,0.0);],, [ac_c99_math=no])
+ AC_TRY_COMPILE([#include <math.h>],
+ [isunordered(0.0,0.0);],, [ac_c99_math=no])
+ AC_MSG_RESULT($ac_c99_math)
+
+ # Check for the existence in <stdio.h> of vscanf, et. al.
+ ac_c99_stdio=yes;
+ AC_MSG_CHECKING([for ISO C99 support in <stdio.h>])
+ AC_TRY_COMPILE([#include <stdio.h>],
+ [snprintf("12", 0, "%i");],, [ac_c99_stdio=no])
+ AC_TRY_COMPILE([#include <stdio.h>
+ #include <stdarg.h>
+ void foo(char* fmt, ...)
+ {va_list args; va_start(args, fmt);
+ vfscanf(stderr, "%i", args);}],
+ [],, [ac_c99_stdio=no])
+ AC_TRY_COMPILE([#include <stdio.h>
+ #include <stdarg.h>
+ void foo(char* fmt, ...)
+ {va_list args; va_start(args, fmt);
+ vscanf("%i", args);}],
+ [],, [ac_c99_stdio=no])
+ AC_TRY_COMPILE([#include <stdio.h>
+ #include <stdarg.h>
+ void foo(char* fmt, ...)
+ {va_list args; va_start(args, fmt);
+ vsnprintf(fmt, 0, "%i", args);}],
+ [],, [ac_c99_stdio=no])
+ AC_TRY_COMPILE([#include <stdio.h>
+ #include <stdarg.h>
+ void foo(char* fmt, ...)
+ {va_list args; va_start(args, fmt);
+ vsscanf(fmt, "%i", args);}],
+ [],, [ac_c99_stdio=no])
+ AC_MSG_RESULT($ac_c99_stdio)
+
+ # Check for the existence in <stdlib.h> of lldiv_t, et. al.
+ ac_c99_stdlib=yes;
+ AC_MSG_CHECKING([for lldiv_t declaration])
+ AC_CACHE_VAL(ac_c99_lldiv_t, [
+ AC_TRY_COMPILE([#include <stdlib.h>],
+ [ lldiv_t mydivt;],
+ [ac_c99_lldiv_t=yes], [ac_c99_lldiv_t=no])
+ ])
+ AC_MSG_RESULT($ac_c99_lldiv_t)
+
+ AC_MSG_CHECKING([for ISO C99 support in <stdlib.h>])
+ AC_TRY_COMPILE([#include <stdlib.h>],
+ [char* tmp; strtof("gnu", &tmp);],, [ac_c99_stdlib=no])
+ AC_TRY_COMPILE([#include <stdlib.h>],
+ [char* tmp; strtold("gnu", &tmp);],, [ac_c99_stdlib=no])
+ AC_TRY_COMPILE([#include <stdlib.h>],
+ [char* tmp; strtoll("gnu", &tmp, 10);],, [ac_c99_stdlib=no])
+ AC_TRY_COMPILE([#include <stdlib.h>],
+ [char* tmp; strtoull("gnu", &tmp, 10);],, [ac_c99_stdlib=no])
+ AC_TRY_COMPILE([#include <stdlib.h>], [llabs(10);],, [ac_c99_stdlib=no])
+ AC_TRY_COMPILE([#include <stdlib.h>], [lldiv(10,1);],, [ac_c99_stdlib=no])
+ AC_TRY_COMPILE([#include <stdlib.h>], [atoll("10");],, [ac_c99_stdlib=no])
+ AC_TRY_COMPILE([#include <stdlib.h>], [_Exit(0);],, [ac_c99_stdlib=no])
+ if test x"$ac_c99_lldiv_t" = x"no"; then
+ ac_c99_stdlib=no;
+ fi;
+ AC_MSG_RESULT($ac_c99_stdlib)
+
+ # Check for the existence of <wchar.h> functions used if C99 is enabled.
+ # XXX the wchar.h checks should be rolled into the general C99 bits.
+ ac_c99_wchar=yes;
+ AC_MSG_CHECKING([for additional ISO C99 support in <wchar.h>])
+ AC_TRY_COMPILE([#include <wchar.h>],
+ [wcstold(L"10.0", NULL);],, [ac_c99_wchar=no])
+ AC_TRY_COMPILE([#include <wchar.h>],
+ [wcstoll(L"10", NULL, 10);],, [ac_c99_wchar=no])
+ AC_TRY_COMPILE([#include <wchar.h>],
+ [wcstoull(L"10", NULL, 10);],, [ac_c99_wchar=no])
+ AC_MSG_RESULT($ac_c99_wchar)
+
+ AC_MSG_CHECKING([for enabled ISO C99 support])
+ if test x"$ac_c99_math" = x"no" ||
+ test x"$ac_c99_stdio" = x"no" ||
+ test x"$ac_c99_stdlib" = x"no" ||
+ test x"$ac_c99_wchar" = x"no"; then
+ enable_c99=no;
+ fi;
+ AC_MSG_RESULT($enable_c99)
+
+ # Option parsed, now set things appropriately
+ if test x"$enable_c99" = x"yes"; then
+ AC_DEFINE(_GLIBCPP_USE_C99)
fi
+
+ AC_LANG_RESTORE
])
dnl
dnl Check for template specializations for the 'long long' type extension.
+dnl NB: Must check for C99 support before calling _GLIBCPP_ENABLE_LONG_LONG
dnl
dnl GLIBCPP_ENABLE_LONG_LONG
dnl --enable-long-long defines _GLIBCPP_USE_LONG_LONG
dnl --disable-long-long leaves _GLIBCPP_USE_LONG_LONG undefined
dnl + Usage: GLIBCPP_ENABLE_LONG_LONG[(DEFAULT)]
-dnl Where DEFAULT is either `yes' or `no'. If ommitted, it
+dnl Where DEFAULT is either `yes' or `no'. If omitted, it
dnl defaults to `no'.
dnl + If 'long long' stuff is not available, ignores DEFAULT and sets `no'.
dnl
*) AC_MSG_ERROR([Unknown argument to enable/disable long long]) ;;
esac],
enable_long_long=GLIBCPP_ENABLE_LONG_LONG_DEFAULT)dnl
-
- # Allow use of os-dependent settings, so that macros that turn on
- # C99 capabilities can be defined and used in a consistent way.
- OS_INC_PATH=${srcdir}/$os_include_dir
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS="-I$OS_INC_PATH"
- # Check for the existence of functions used if long long is enabled.
- AC_CHECK_FUNC(strtoll,,ac_strtoll=no)
- AC_CHECK_FUNC(strtoull,,ac_strtoull=no)
-
- # Check for lldiv_t, et. al.
- AC_MSG_CHECKING([for lldiv_t declaration])
- AC_CACHE_VAL(glibcpp_lldiv_t_use, [
- AC_TRY_COMPILE([#include <bits/os_defines.h>
- #include <stdlib.h>],
- [ lldiv_t mydivt;],
- [glibcpp_lldiv_t_use=yes], [glibcpp_lldiv_t_use=no])
- ])
- AC_MSG_RESULT($glibcpp_lldiv_t_use)
- if test x$glibcpp_lldiv_t_use = x"yes"; then
- AC_DEFINE(HAVE_LLDIV_T)
- fi
-
- AC_MSG_CHECKING([for enabled long long])
- if test x"$ac_strtoll" = xno || test x"$ac_strtoull" = xno; then
+ # iostreams require strtoll, strtoull to compile. If the
+ # GLIBCPP_ENABLE_C99 tests found these, and if C99 support is enabled,
+ # go ahead and allow long long to be used.
+ if test x"$enable_c99" = x"no"; then
enable_long_long=no;
- fi;
- AC_MSG_RESULT($enable_long_long)
+ fi
# Option parsed, now set things appropriately
+ AC_MSG_CHECKING([for enabled long long support])
if test x"$enable_long_long" = xyes; then
AC_DEFINE(_GLIBCPP_USE_LONG_LONG)
fi
-
- # Reset CFLAGS
- CFLAGS="$ac_save_CFLAGS"
+ AC_MSG_RESULT($enable_long_long)
])
AC_MSG_CHECKING([for c header strategy to use])
AC_ARG_ENABLE(cheaders,
changequote(<<, >>)dnl
-<< --enable-cheaders construct "C" header files for
- g++ [default=>>GLIBCPP_ENABLE_CHEADERS_DEFAULT],
+<< --enable-cheaders construct "C" header files for g++ [default=>>GLIBCPP_ENABLE_CHEADERS_DEFAULT],
changequote([, ])
[case "$enableval" in
c)
AC_SUBST(WARN_FLAGS)
])
-
+dnl
dnl GLIBCPP_EXPORT_INSTALL_INFO
dnl calculates gxx_install_dir
+dnl exports glibcpp_toolexecdir
+dnl exports glibcpp_toolexeclibdir
+dnl exports glibcpp_builddir
+dnl exports glibcpp_srcdir
+dnl exports glibcpp_prefixdir
dnl
+dnl Assumes cross_compiling bits already done, and with_cross_host in
+dnl particular
+dnl
+dnl GLIBCPP_EXPORT_INSTALL_INFO
AC_DEFUN(GLIBCPP_EXPORT_INSTALL_INFO, [
+glibcpp_toolexecdir=no
+glibcpp_toolexeclibdir=no
+
+# Export build and source directories.
+# These need to be absolute paths, yet at the same time need to
+# canonicalize only relative paths, because then amd will not unmount
+# drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd.
+glibcpp_builddir=`pwd`
+case $srcdir in
+[\\/$]* | ?:[\\/]*) glibcpp_srcdir=${srcdir} ;;
+*) glibcpp_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;;
+esac
+glibcpp_prefixdir=${prefix}
+
AC_MSG_CHECKING([for interface version number])
libstdcxx_interface=$INTERFACE
AC_MSG_RESULT($libstdcxx_interface)
# Process the option --with-gxx-include-dir=<path to include-files directory>
AC_MSG_CHECKING([for --with-gxx-include-dir])
AC_ARG_WITH(gxx-include-dir,
-[ --with-gxx-include-dir the installation directory for include files],
+[ --with-gxx-include-dir the installation directory for include files],
[case "${withval}" in
yes)
AC_MSG_ERROR(Missing directory for --with-gxx-include-dir)
# and header files if --enable-version-specific-runtime-libs option
# is selected.
changequote(,)dnl
-gcc_tmp=`grep version_string ${srcdir}/../gcc/version.c | awk '{print $6}'`
-gcc_num=`echo ${gcc_tmp} | sed 's/\"//g'`
-#gcc_date=`grep version_string ${srcdir}/../gcc/version.c | awk '{print $7}'`
-#gcc_version=$gcc_num-$gcc_date
-gcc_version=$gcc_num
-gxx_include_dir=$(libdir)/gcc-lib/$(target_alias)/$(gcc_version)/include/g++
+gcc_version_trigger=${srcdir}/../gcc/version.c
+gcc_version_full=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^\"]*\)\".*/\1/'`
+gcc_version=`echo ${gcc_version_full} | sed -e 's/\([^ ]*\) .*/\1/'`
+gxx_include_dir='$(libdir)/gcc-lib/$(target_alias)/'${gcc_version}/include/g++
+glibcpp_toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+glibcpp_toolexeclibdir='$(toolexecdir)/'${gcc_version}'$(MULTISUBDIR)'
changequote([,])dnl
-AC_SUBST(gcc_version)
-AM_CONDITIONAL(VERSION_SPECIFIC_LIBS, test x"$version_specific_libs" = x"yes")
],version_specific_libs=no)
AC_MSG_RESULT($version_specific_libs)
-AC_MSG_CHECKING([for install location])
+# Default case for install directory for include files.
if test x"$version_specific_libs" = x"no" \
- && test x"$gxx_include_dir"=x"no"; then
- gxx_include_dir=${prefix}/include/g++-${libstdcxx_interface}
+ && test x"$gxx_include_dir" = x"no"; then
+ gxx_include_dir='$(prefix)'/include/g++-${libstdcxx_interface}
+fi
+
+# Calculate glibcpp_toolexecdir, glibcpp_toolexeclibdir
+# Install a library built with a cross compiler in tooldir, not libdir.
+if test x"$glibcpp_toolexecdir" = x"no"; then
+ if test -n "$with_cross_host" &&
+ test x"$with_cross_host" != x"no"; then
+ glibcpp_toolexecdir='$(exec_prefix)/$(target_alias)'
+ glibcpp_toolexeclibdir='$(toolexecdir)/lib$(MULTISUBDIR)'
+ else
+ glibcpp_toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+ glibcpp_toolexeclibdir='$(libdir)$(MULTISUBDIR)'
+ fi
fi
+
+AC_MSG_CHECKING([for install location])
AC_MSG_RESULT($gxx_include_dir)
+
+AC_SUBST(glibcpp_builddir)
+AC_SUBST(glibcpp_srcdir)
+AC_SUBST(glibcpp_prefixdir)
AC_SUBST(gxx_include_dir)
+AC_SUBST(glibcpp_toolexecdir)
+AC_SUBST(glibcpp_toolexeclibdir)
])
AC_DEFUN([AC_PROG_LD])
])
+
OSDN Git Service
