-# Makefile.in generated by automake 1.11 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/../config.guess \
- $(srcdir)/../config.sub $(srcdir)/../install-sh \
- $(srcdir)/../ltmain.sh $(srcdir)/../missing \
- $(srcdir)/../mkinstalldirs $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/config.h.in \
- $(top_srcdir)/configure $(top_srcdir)/fragment.am \
- $(top_srcdir)/scripts/testsuite_flags.in ChangeLog
+DIST_COMMON = $(top_srcdir)/fragment.am README ChangeLog \
+ $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/configure $(am__configure_deps) \
+ $(srcdir)/config.h.in $(srcdir)/../mkinstalldirs \
+ $(top_srcdir)/scripts/testsuite_flags.in \
+ $(top_srcdir)/scripts/extract_symvers.in \
+ $(top_srcdir)/doc/xsl/customization.xsl.in
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../config/enable.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
+ $(top_srcdir)/../config/enable.m4 \
$(top_srcdir)/../config/futex.m4 \
$(top_srcdir)/../config/iconv.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/lib-ld.m4 \
$(top_srcdir)/../config/lib-link.m4 \
$(top_srcdir)/../config/lib-prefix.m4 \
+ $(top_srcdir)/../config/lthostflags.m4 \
$(top_srcdir)/../config/multi.m4 \
$(top_srcdir)/../config/no-executables.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
$(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \
$(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/../config/gc++filt.m4 \
$(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = scripts/testsuite_flags
+CONFIG_CLEAN_FILES = scripts/testsuite_flags scripts/extract_symvers \
+ doc/xsl/customization.xsl
CONFIG_CLEAN_VPATH_FILES =
depcomp =
am__depfiles_maybe =
SOURCES =
-DIST_SOURCES =
MULTISRCTOP =
MULTIBUILDTOP =
MULTIDIRS =
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir dist dist-all distcheck
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
ETAGS = etags
CTAGS = ctags
-DIST_SUBDIRS = include libsupc++ doc src po testsuite python
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- { test ! -d "$(distdir)" \
- || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr "$(distdir)"; }; }
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
+DIST_SUBDIRS = include libsupc++ src doc po testsuite python
ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@
ACLOCAL = @ACLOCAL@
ALLOCATOR_H = @ALLOCATOR_H@
CTIME_H = @CTIME_H@
CXX = @CXX@
CXXCPP = @CXXCPP@
+CXXFILT = @CXXFILT@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
C_INCLUDE_DIR = @C_INCLUDE_DIR@
+DBLATEX = @DBLATEX@
DEBUG_FLAGS = @DEBUG_FLAGS@
DEFS = @DEFS@
+DOT = @DOT@
+DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
LIBICONV = @LIBICONV@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
-LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+PDFLATEX = @PDFLATEX@
RANLIB = @RANLIB@
SECTION_FLAGS = @SECTION_FLAGS@
SECTION_LDFLAGS = @SECTION_LDFLAGS@
VERSION = @VERSION@
WARN_FLAGS = @WARN_FLAGS@
WERROR = @WERROR@
+XMLLINT = @XMLLINT@
+XSLTPROC = @XSLTPROC@
+XSL_STYLE_DIR = @XSL_STYLE_DIR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
am__tar = @am__tar@
am__untar = @am__untar@
baseline_dir = @baseline_dir@
+baseline_subdir_switch = @baseline_subdir_switch@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@
glibcxx_POFILES = @glibcxx_POFILES@
glibcxx_builddir = @glibcxx_builddir@
+glibcxx_compiler_pic_flag = @glibcxx_compiler_pic_flag@
+glibcxx_compiler_shared_flag = @glibcxx_compiler_shared_flag@
glibcxx_localedir = @glibcxx_localedir@
+glibcxx_lt_pic_flag = @glibcxx_lt_pic_flag@
glibcxx_prefixdir = @glibcxx_prefixdir@
glibcxx_srcdir = @glibcxx_srcdir@
-glibcxx_thread_h = @glibcxx_thread_h@
glibcxx_toolexecdir = @glibcxx_toolexecdir@
glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
gxx_include_dir = @gxx_include_dir@
libtool_VERSION = @libtool_VERSION@
localedir = @localedir@
localstatedir = @localstatedir@
-lt_ECHO = @lt_ECHO@
+lt_host_flags = @lt_host_flags@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
+python_mod_dir = @python_mod_dir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
+toplevel_builddir = @toplevel_builddir@
toplevel_srcdir = @toplevel_srcdir@
# May be used by various substitution variables.
STAMP = echo timestamp >
toolexecdir = $(glibcxx_toolexecdir)
toolexeclibdir = $(glibcxx_toolexeclibdir)
+@ENABLE_WERROR_FALSE@WERROR_FLAG =
+@ENABLE_WERROR_TRUE@WERROR_FLAG = $(WERROR)
# These bits are all figured out from configure. Look in acinclude.m4
# or configure.ac to see how they are set. See GLIBCXX_EXPORT_FLAGS.
CONFIG_CXXFLAGS = \
- $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS)
+ $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS) -frandom-seed=$@
WARN_CXXFLAGS = \
- $(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once
+ $(WARN_FLAGS) $(WERROR_FLAG) -fdiagnostics-show-location=once
# -I/-D flags to pass when compiling.
AM_CPPFLAGS = $(GLIBCXX_INCLUDES)
-@GLIBCXX_HOSTED_TRUE@hosted_source = doc src po testsuite
+@GLIBCXX_HOSTED_TRUE@hosted_source = src doc po testsuite
SUBDIRS = include libsupc++ $(hosted_source) python
ACLOCAL_AMFLAGS = -I . -I .. -I ../config
+@BUILD_XML_FALSE@STAMP_XML =
+
+# Documentation conditionals for output.
+@BUILD_XML_TRUE@STAMP_XML = doc-xml
+@BUILD_XML_FALSE@STAMP_INSTALL_XML =
+@BUILD_XML_TRUE@STAMP_INSTALL_XML = doc-install-xml
+@BUILD_HTML_FALSE@STAMP_HTML =
+@BUILD_HTML_TRUE@STAMP_HTML = doc-html
+@BUILD_HTML_FALSE@STAMP_INSTALL_HTML =
+@BUILD_HTML_TRUE@STAMP_INSTALL_HTML = doc-install-html
+@BUILD_MAN_FALSE@STAMP_MAN =
+@BUILD_MAN_TRUE@STAMP_MAN = doc-man
+@BUILD_MAN_FALSE@STAMP_INSTALL_MAN =
+@BUILD_MAN_TRUE@STAMP_INSTALL_MAN = doc-install-man
+@BUILD_PDF_FALSE@STAMP_PDF =
+@BUILD_PDF_TRUE@STAMP_PDF = doc-pdf
+@BUILD_PDF_FALSE@STAMP_INSTALL_PDF =
+@BUILD_PDF_TRUE@STAMP_INSTALL_PDF = doc-install-pdf
+@BUILD_EPUB_FALSE@STAMP_EPUB = doc-epub
+@BUILD_EPUB_TRUE@STAMP_EPUB = doc-epub
+@BUILD_EPUB_FALSE@STAMP_INSTALL_EPUB = doc-install-epub
+@BUILD_EPUB_TRUE@STAMP_INSTALL_EPUB = doc-install-epub
# Multilib support.
MAKEOVERRIDES =
"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
"MAKE=$(MAKE)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
- "PICFLAG=$(PICFLAG)" \
- "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
"SHELL=$(SHELL)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"exec_prefix=$(exec_prefix)" \
-rm -f config.h stamp-h1
scripts/testsuite_flags: $(top_builddir)/config.status $(top_srcdir)/scripts/testsuite_flags.in
cd $(top_builddir) && $(SHELL) ./config.status $@
+scripts/extract_symvers: $(top_builddir)/config.status $(top_srcdir)/scripts/extract_symvers.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+doc/xsl/customization.xsl: $(top_builddir)/config.status $(top_srcdir)/doc/xsl/customization.xsl.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1'; \
+ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- test -d "$(distdir)" || mkdir "$(distdir)"
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
- -test -n "$(am__skip_mode_fix)" \
- || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r "$(distdir)"
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-lzma: distdir
- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
- $(am__remove_distdir)
-
-dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lzma*) \
- unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
- *.tar.xz*) \
- xz -dc $(distdir).tar.xz | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- test -d $(distdir)/_build || exit 0; \
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
- && cd "$$am__cwd" \
- || exit 1
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
- @$(am__cd) '$(distuninstallcheck_dir)' \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile all-multi config.h
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-tags
-dvi: dvi-recursive
-
dvi-am:
-html: html-recursive
-
html-am:
-info: info-recursive
-
info-am:
install-data-am:
-install-dvi: install-dvi-recursive
-
install-dvi-am:
install-exec-am: install-multi
-install-html: install-html-recursive
-
install-html-am:
-install-info: install-info-recursive
-
install-info-am:
-install-man:
-
-install-pdf: install-pdf-recursive
-
install-pdf-am:
-install-ps: install-ps-recursive
-
install-ps-am:
installcheck-am:
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-pdf: pdf-recursive
-
pdf-am:
-ps: ps-recursive
-
ps-am:
uninstall-am:
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am all-multi am--refresh check check-am clean \
clean-generic clean-libtool clean-multi ctags ctags-recursive \
- dist dist-all dist-bzip2 dist-gzip dist-lzma dist-shar \
- dist-tarZ dist-xz dist-zip distcheck distclean \
- distclean-generic distclean-hdr distclean-libtool \
- distclean-multi distclean-tags distcleancheck distdir \
- distuninstallcheck dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-dvi \
- install-dvi-am install-exec install-exec-am install-html \
- install-html-am install-info install-info-am install-man \
- install-multi install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs installdirs-am maintainer-clean \
+ distclean distclean-generic distclean-hdr distclean-libtool \
+ distclean-multi distclean-tags dvi dvi-am html html-am info \
+ info-am install install-am install-data install-data-am \
+ install-dvi install-dvi-am install-exec install-exec-am \
+ install-html install-html-am install-info install-info-am \
+ install-man install-multi install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic maintainer-clean-multi mostlyclean \
mostlyclean-generic mostlyclean-libtool mostlyclean-multi pdf \
pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
-# Handy forwarding targets.
+# Testsuite/check forwarding targets.
check-%:
cd testsuite && $(MAKE) $@
+# Documentation forwarding targets.
doc-%:
cd doc && $(MAKE) $@
+# Documentation primary rules.
+#
+# xml:
+# html:
+# pdf:
+# man:
+# info:
+# ps:
+# dvi:
+# epub:
+# install-xml:
+# install-html:
+# install-pdf:
+# install-man:
+# install-info:
+# install-ps:
+# install-dvi:
+# install-epub:
+
+xml: $(STAMP_XML)
+install-xml: $(STAMP_INSTALL_XML)
+
+html: $(STAMP_HTML)
+install-html: $(STAMP_INSTALL_HTML)
+
+man: $(STAMP_MAN)
+install-man: $(STAMP_INSTALL_MAN)
+
+pdf: $(STAMP_PDF)
+install-pdf: $(STAMP_INSTALL_PDF)
+
+epub: $(STAMP_EPUB)
+install-epub: $(STAMP_INSTALL_EPUB)
+
+info:
+install-info:
+
+ps:
+install-ps:
+
+dvi:
+install-dvi:
+
# All the machinations with string instantiations messes up the
# automake-generated TAGS rule. Make a simple one here.
TAGS: tags-recursive $(LISP)
OSDN Git Service
