ac_help="$ac_help
--with-cross-host=HOST configuring with a cross compiler"
ac_help="$ac_help
+ --with-newlib Configuring with newlib"
+ac_help="$ac_help
--enable-multilib build many library versions (default)"
ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
ac_help="$ac_help
--with-pic try to use only PIC/non-PIC objects [default=use both]"
ac_help="$ac_help
- --enable-fast-character prefer speed over size for Character"
-ac_help="$ac_help
--disable-getenv-properties
don't set system properties from GCJ_PROPERTIES"
ac_help="$ac_help
ac_help="$ac_help
--with-system-zlib use installed libz"
ac_help="$ac_help
+ --with-x use the X Window System"
+ac_help="$ac_help
+ --enable-java-awt list of AWT peer implementations to be built"
+ac_help="$ac_help
--enable-java-gc=TYPE choose garbage collector [boehm]"
ac_help="$ac_help
--with-libiconv-prefix=DIR search for libiconv in DIR/include and DIR/lib"
ac_help="$ac_help
- --with-x use the X Window System"
+ --disable-gtktest do not try to compile and run a test GTK+ program"
ac_help="$ac_help
- --enable-java-awt list of AWT peer implementations to be built"
+ --disable-glibtest do not try to compile and run a test GLIB program"
+ac_help="$ac_help
+ --with-libart-prefix=PFX Prefix where LIBART is installed (optional)"
+ac_help="$ac_help
+ --with-libart-exec-prefix=PFX Exec prefix where LIBART is installed (optional)"
+ac_help="$ac_help
+ --disable-libarttest Do not try to compile and run a test LIBART program"
# Initialize some variables set by options.
# The variables have the same names as the options, with
program_transform_name=s,x,x,
silent=
site=
-sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
- --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
- -site-file | --site-file | --site-fil | --site-fi | --site-f)
- ac_prev=sitefile ;;
- -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
- sitefile="$ac_optarg" ;;
-
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
- if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
-else
- CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
+# This works around the fact that libtool configuration may change LD
+# for this particular configuration, but some shells, instead of
+# keeping the changes in LD private, export them just because LD is
+# exported.
+ORIGINAL_LD_FOR_MULTILIBS=$LD
+
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:592: checking whether ln -s works" >&5
+echo "configure:597: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+# Check whether --with-newlib or --without-newlib was given.
+if test "${with_newlib+set}" = set; then
+ withval="$with_newlib"
+ :
+fi
+
+
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:638: checking for a BSD compatible install" >&5
+echo "configure:650: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:691: checking whether build environment is sane" >&5
+echo "configure:703: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:748: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:760: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:781: checking for Cygwin environment" >&5
+echo "configure:793: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 786 "configure"
+#line 798 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:797: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:809: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:814: checking for mingw32 environment" >&5
+echo "configure:826: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 819 "configure"
+#line 831 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:826: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:838: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
fi
# This works around an automake problem.
-mkinstalldirs="`cd $ac_aux_dir && pwd`/mkinstalldirs"
+mkinstalldirs="`cd $ac_aux_dir && ${PWDCMD-pwd}`/mkinstalldirs"
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:953: checking host system type" >&5
+echo "configure:965: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:974: checking target system type" >&5
+echo "configure:986: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:992: checking build system type" >&5
+echo "configure:1004: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1021: checking for $ac_word" >&5
+echo "configure:1033: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1051: checking for $ac_word" >&5
+echo "configure:1063: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1102: checking for $ac_word" >&5
+echo "configure:1114: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1135: checking whether we are using GNU C" >&5
+echo "configure:1147: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1144: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1156: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1163: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1175: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
-# We use the libstdc++-v3 version of LIB_AC_PROG_CXX, that gets
-# glibcpp_CXX cached instead of CXX. That's because we're passed a
+# We use the libstdc++-v3 version of LIB_AC_PROG_CXX, but use
+# glibjava_CXX instead of glibcpp_CXX. That's because we're passed a
# different definition of CXX than other directories, since we don't
# depend on libstdc++-v3 having already been built.
-# Use glibcpp_CXX so that we do not cause CXX to be cached with the
-# flags that come in CXX while configuring libstdc++. They're different
+# Use glibjava_CXX so that we do not cause CXX to be cached with the
+# flags that come in CXX while configuring libjava. They're different
# from those used for all other target libraries. If CXX is set in
# the environment, respect that here.
-glibcpp_CXX=$CXX
+glibjava_CXX=$CXX
for ac_prog in $CCC c++ g++ gcc CC cxx cc++
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1212: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_glibcpp_CXX'+set}'`\" = set"; then
+echo "configure:1224: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_glibjava_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$glibcpp_CXX"; then
- ac_cv_prog_glibcpp_CXX="$glibcpp_CXX" # Let the user override the test.
+ if test -n "$glibjava_CXX"; then
+ ac_cv_prog_glibjava_CXX="$glibjava_CXX" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_glibcpp_CXX="$ac_prog"
+ ac_cv_prog_glibjava_CXX="$ac_prog"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-glibcpp_CXX="$ac_cv_prog_glibcpp_CXX"
-if test -n "$glibcpp_CXX"; then
- echo "$ac_t""$glibcpp_CXX" 1>&6
+glibjava_CXX="$ac_cv_prog_glibjava_CXX"
+if test -n "$glibjava_CXX"; then
+ echo "$ac_t""$glibjava_CXX" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-test -n "$glibcpp_CXX" && break
+test -n "$glibjava_CXX" && break
done
-test -n "$glibcpp_CXX" || glibcpp_CXX="gcc"
+test -n "$glibjava_CXX" || glibjava_CXX="gcc"
-CXX=$glibcpp_CXX
-test -z "$glibcpp_CXX" && { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; }
+CXX=$glibjava_CXX
+test -z "$glibjava_CXX" && { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1247: checking whether we are using GNU C++" >&5
+echo "configure:1259: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1256: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1268: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1271: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1283: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1320: checking for working aclocal" >&5
+echo "configure:1332: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1333: checking for working autoconf" >&5
+echo "configure:1345: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1346: checking for working automake" >&5
+echo "configure:1358: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1359: checking for working autoheader" >&5
+echo "configure:1371: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1372: checking for working makeinfo" >&5
+echo "configure:1384: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
-# AC_CHECK_TOOL does AC_REQUIRE (AC_CANONICAL_BUILD). If we don't
-# run it explicitly here, it will be run implicitly before
-# LIBGCJ_CONFIGURE, which doesn't work because that means that it will
-# be run before AC_CANONICAL_HOST.
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1391: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
- case $nonopt in
- NONE) build_alias=$host_alias ;;
- *) build_alias=$nonopt ;;
- esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1412: checking for $ac_word" >&5
+echo "configure:1401: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1444: checking for $ac_word" >&5
+echo "configure:1433: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1476: checking for $ac_word" >&5
+echo "configure:1465: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1508: checking for $ac_word" >&5
+echo "configure:1497: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1553: checking for a BSD compatible install" >&5
+echo "configure:1542: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1607: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1596: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
-# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which cant create executables. So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
- # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
- # to nothing, so nothing would remain between `then' and `fi' if it
- # were not for the `:' below.
- :
-
+
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1645: checking for executable suffix" >&5
+echo "configure:1622: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1655: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *.c | *.o | *.obj) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
echo "$ac_t""${ac_cv_exeext}" 1>&6
ac_exeext=$EXEEXT
-fi
# configure.host sets the following important variables
# libgcj_cflags - host specific C compiler flags
-# Only use libltdl for native builds.
-if test -z "${with_cross_host}"; then
+# Only use libltdl for non-newlib builds.
+if test "x${with_newlib}" = "x" || test "x${with_newlib}" = "xno"; then
case $enable_ltdl_convenience in
no) { echo "configure: error: this package needs a convenience libltdl" 1>&2; exit 1; } ;;
"") enable_ltdl_convenience=yes
# Sigh. Libtool's macro doesn't do the right thing.
INCLTDL="-I\$(top_srcdir)/libltdl $INCLTDL"
# FIXME: this is a hack.
- sub_auxdir="`cd $ac_aux_dir && pwd`"
+ sub_auxdir="`cd $ac_aux_dir && ${PWDCMD-pwd}`"
ac_configure_args="$ac_configure_args --with-auxdir=$sub_auxdir"
fi
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1806: checking for ld used by GCC" >&5
+echo "configure:1782: checking for ld used by GCC" >&5
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1836: checking for GNU ld" >&5
+echo "configure:1812: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1839: checking for non-GNU ld" >&5
+echo "configure:1815: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1874: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1850: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1891: checking for $LD option to reload object files" >&5
+echo "configure:1867: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1903: checking for BSD-compatible nm" >&5
+echo "configure:1879: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1941: checking how to recognise dependant libraries" >&5
+echo "configure:1917: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
;;
hpux10.20*|hpux11*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ case $host_cpu in
+ hppa*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ esac
;;
irix5* | irix6*)
# This must be Linux ELF.
linux-gnu*)
case $host_cpu in
- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
lt_cv_deplibs_check_method=pass_all ;;
*)
# glibc up to 2.1.1 does not perform some relocations on ARM
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2105: checking for object suffix" >&5
+echo "configure:2090: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2111: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2096: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2135: checking for ${ac_tool_prefix}file" >&5
+echo "configure:2120: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2197: checking for file" >&5
+echo "configure:2182: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2268: checking for $ac_word" >&5
+echo "configure:2253: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2300: checking for $ac_word" >&5
+echo "configure:2285: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2335: checking for $ac_word" >&5
+echo "configure:2320: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2367: checking for $ac_word" >&5
+echo "configure:2352: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 2434 "configure"' > conftest.$ac_ext
- if { (eval echo configure:2435: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 2419 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2420: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
LD="${LD-ld} -64"
;;
esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:2453: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:2469: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
fi
rm -rf conftest*
;;
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2456: checking whether the C compiler needs -belf" >&5
+echo "configure:2513: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 2469 "configure"
+#line 2526 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2533: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
esac
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:2506: checking how to run the C++ preprocessor" >&5
+echo "configure:2563: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
-#line 2519 "configure"
+#line 2576 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2524: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2581: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
TESTSUBDIR_FALSE=
fi
-# Check whether --enable-fast-character or --disable-fast-character was given.
-if test "${enable_fast_character+set}" = set; then
- enableval="$enable_fast_character"
- # Nothing
-
-else
- cat >> confdefs.h <<\EOF
-#define COMPACT_CHARACTER 1
-EOF
-
-fi
-
-
# Check whether --enable-getenv-properties or --disable-getenv-properties was given.
if test "${enable_getenv_properties+set}" = set; then
enableval="$enable_getenv_properties"
enable_hash_synchronization=$enable_hash_synchronization_default
fi
+if test "${slow_pthread_self}" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define SLOW_PTHREAD_SELF 1
+EOF
+
+fi
+
LIBGCJDEBUG="false"
EOF
fi
+INTERPRETER="$libgcj_interpreter"
+
echo $ac_n "checking for exception model to use""... $ac_c" 1>&6
-echo "configure:2764: checking for exception model to use" >&5
+echo "configure:2817: checking for exception model to use" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
:
else
cat > conftest.$ac_ext << EOF
-#line 2779 "configure"
+#line 2832 "configure"
struct S { ~S(); };
void bar();
void foo()
EOF
old_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=-S
-if { (eval echo configure:2790: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2843: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if grep _Unwind_SjLj_Resume conftest.s >/dev/null 2>&1 ; then
enable_sjlj_exceptions=yes
elif grep _Unwind_Resume conftest.s >/dev/null 2>&1 ; then
echo "$ac_t""$ac_exception_model_name" 1>&6
+# If we are non using SJLJ exceptions, and this host does not have support
+# for unwinding from a signal handler, enable checked dereferences and divides.
+if test $can_unwind_signal = no && test $enable_sjlj_exceptions = no; then
+ CHECKREFSPEC=-fcheck-references
+ DIVIDESPEC=-fuse-divide-subroutine
+ EXCEPTIONSPEC=
+fi
+
# Check whether --enable-java-net or --disable-java-net was given.
if test "${enable_java_net+set}" = set; then
enableval="$enable_java_net"
#define USE_LIBFFI 1
EOF
- LIBFFI=../libffi/libfficonvenience.la
- LIBFFIINCS='-I$(top_srcdir)/../libffi/include -I$(MULTIBUILDTOP)../libffi/include'
+ LIBFFI=../libffi/libffi_convenience.la
+ LIBFFIINCS='-I$(top_srcdir)/../libffi/include -I../libffi/include'
fi
no) case "$host" in
*mingw*)
PLATFORM=Win32
+ PLATFORMNET=Win32
PLATFORMOBJS=win32.lo
PLATFORMH=win32.h
+
+echo $ac_n "checking whether 'ld' is at least 2.13""... $ac_c" 1>&6
+echo "configure:2954: checking whether 'ld' is at least 2.13" >&5
+LD_PROG=`$CC --print-prog-name=ld`
+LD_VERSION=`$LD_PROG --version`
+LD_VERSION_MAJOR=`echo "$LD_VERSION" | head -1 | cut -d '.' -f 1 | cut -d ' ' -f 4`
+LD_VERSION_MINOR=`echo "$LD_VERSION" | head -1 | cut -d '.' -f 2`
+if expr "$LD_VERSION_MAJOR" \> 2 > /dev/null; then
+ LD_OK="ok"
+else
+ if expr "$LD_VERSION_MAJOR" = 2 && expr "$LD_VERSION_MINOR" \>= 13 > /dev/null; then
+ LD_OK="ok"
+ fi
+fi
+if test "x$LD_OK" != x; then
+ echo "$ac_t""yes; major=$LD_VERSION_MAJOR, minor=$LD_VERSION_MINOR" 1>&6
+else
+ echo "$ac_t""no; major=$LD_VERSION_MAJOR, minor=$LD_VERSION_MINOR" 1>&6
+ echo "configure: warning: ld <2.13 detected; enabling JV_LINKER_CANNOT_8BYTE_ALIGN_STATICS hack..." 1>&2
+ cat >> confdefs.h <<\EOF
+#define JV_LINKER_CANNOT_8BYTE_ALIGN_STATICS 1
+EOF
+
+fi
;;
*)
PLATFORM=Posix
+ PLATFORMNET=Posix
PLATFORMOBJS=posix.lo
PLATFORMH=posix.h
;;
;;
*)
PLATFORM=Ecos
+ PLATFORMNET=NoNet
cat >> confdefs.h <<\EOF
#define ECOS 1
EOF
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2912: checking how to run the C preprocessor" >&5
+echo "configure:3000: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2927 "configure"
+#line 3015 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2933: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2944 "configure"
+#line 3032 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2950: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3038: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2961 "configure"
+#line 3049 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2967: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3055: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
cat > conftest.$ac_ext <<EOF
-#line 2992 "configure"
+#line 3080 "configure"
#include "confdefs.h"
#include <stdint.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 3007 "configure"
+#line 3095 "configure"
#include "confdefs.h"
#include <inttypes.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 3022 "configure"
+#line 3110 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 3037 "configure"
+#line 3125 "configure"
#include "confdefs.h"
#include <sys/config.h>
EOF
cat > conftest.$ac_ext <<EOF
-#line 3054 "configure"
+#line 3142 "configure"
#include "confdefs.h"
#include <time.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 3069 "configure"
+#line 3157 "configure"
#include "confdefs.h"
#include <time.h>
EOF
+test -d java/net || mkdir java/net
+
+
+
+
+
case "${host}" in
*mingw*)
SYSTEMSPEC="-lgdi32 -lwsock32 -lws2_32"
esac
-LIBGCJTESTSPEC="-L`pwd`/.libs -rpath `pwd`/.libs"
+LIBGCJTESTSPEC="-L`${PWDCMD-pwd}`/.libs -rpath `${PWDCMD-pwd}`/.libs"
# Check whether --with-system-zlib or --without-system-zlib was given.
ZLIBTESTSPEC=
-libsubdir=.libs
+# If we find X, set shell vars x_includes and x_libraries to the
+# paths, otherwise set no_x=yes.
+# Uses ac_ vars as temps to allow command line to override cache and checks.
+# --without-x overrides everything else, but does not touch the cache.
+echo $ac_n "checking for X""... $ac_c" 1>&6
+echo "configure:3217: checking for X" >&5
-echo $ac_n "checking for garbage collector to use""... $ac_c" 1>&6
-echo "configure:3121: checking for garbage collector to use" >&5
-# Check whether --enable-java-gc or --disable-java-gc was given.
-if test "${enable_java_gc+set}" = set; then
- enableval="$enable_java_gc"
-
- GC=$enableval
-else
- GC=boehm
+# Check whether --with-x or --without-x was given.
+if test "${with_x+set}" = set; then
+ withval="$with_x"
+ :
fi
-GCLIBS=
-GCINCS=
-GCDEPS=
-GCOBJS=
-GCSPEC=
-JC1GCSPEC=
-GCTESTSPEC=
-case "$GC" in
- boehm)
- echo "$ac_t""boehm" 1>&6
- GCDEPS='$(top_builddir)/../boehm-gc/libgcjgc.la'
- # We include the path to the boehm-gc build directory.
- # See Makefile.am to understand why.
- GCLIBS="$GCDEPS -L\$(here)/../boehm-gc/$libsubdir"
- GCINCS='-I$(top_srcdir)/../boehm-gc/include'
- GCSPEC='-lgcjgc'
- JC1GCSPEC='-fuse-boehm-gc'
- GCTESTSPEC="-L`pwd`/../boehm-gc/.libs -rpath `pwd`/../boehm-gc/.libs"
- GCINCS="$GCINCS `cat ../boehm-gc/boehm-cflags`"
- GCOBJS=boehm.lo
- GCHDR=boehm-gc.h
- cat >> confdefs.h <<\EOF
-#define HAVE_BOEHM_GC 1
+# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
+if test "x$with_x" = xno; then
+ # The user explicitly disabled X.
+ have_x=disabled
+else
+ if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
+ # Both variables are already set.
+ have_x=yes
+ else
+if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # One or both of the vars are not set, and there is no cached value.
+ac_x_includes=NO ac_x_libraries=NO
+rm -fr conftestdir
+if mkdir conftestdir; then
+ cd conftestdir
+ # Make sure to not put "make" in the Imakefile rules, since we grep it out.
+ cat > Imakefile <<'EOF'
+acfindx:
+ @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
EOF
+ if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+ eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
+ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
+ for ac_extension in a so sl; do
+ if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
+ test -f $ac_im_libdir/libX11.$ac_extension; then
+ ac_im_usrlibdir=$ac_im_libdir; break
+ fi
+ done
+ # Screen out bogus values from the imake configuration. They are
+ # bogus both because they are the default anyway, and because
+ # using them would break gcc on systems where it needs fixed includes.
+ case "$ac_im_incroot" in
+ /usr/include) ;;
+ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
+ esac
+ case "$ac_im_usrlibdir" in
+ /usr/lib | /lib) ;;
+ *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
+ esac
+ fi
+ cd ..
+ rm -fr conftestdir
+fi
- ;;
- no)
- echo "$ac_t""none" 1>&6
- GCOBJS=nogc.lo
- GCHDR=no-gc.h
- ;;
- *)
- { echo "configure: error: unrecognized collector \"$GC\"" 1>&2; exit 1; }
- ;;
-esac
-
-
-
-
-
-
-
-
-
-
-echo $ac_n "checking for thread model used by GCC""... $ac_c" 1>&6
-echo "configure:3177: checking for thread model used by GCC" >&5
-THREADS=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
-echo "$ac_t""$THREADS" 1>&6
+if test "$ac_x_includes" = NO; then
+ # Guess where to find include files, by looking for this one X11 .h file.
+ test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
-case "$THREADS" in
- no | none | single)
- THREADS=none
- ;;
- posix | pthreads)
- THREADS=posix
- case "$host" in
- *-*-linux*)
- cat >> confdefs.h <<\EOF
-#define LINUX_THREADS 1
+ # First, try using that file with no special directory specified.
+cat > conftest.$ac_ext <<EOF
+#line 3279 "configure"
+#include "confdefs.h"
+#include <$x_direct_test_include>
EOF
-
- ;;
- esac
- ;;
- win32)
- ;;
- decosf1 | irix | mach | os2 | solaris | dce | vxworks)
- { echo "configure: error: thread package $THREADS not yet supported" 1>&2; exit 1; }
- ;;
- *)
- { echo "configure: error: $THREADS is an unknown thread package" 1>&2; exit 1; }
- ;;
-esac
-
-THREADLIBS=
-THREADINCS=
-THREADDEPS=
-THREADOBJS=
-THREADH=
-THREADSPEC=
-case "$THREADS" in
- posix)
- case "$host" in
- *-*-cygwin*)
- # Don't set THREADLIBS here. Cygwin doesn't have -lpthread.
- ;;
-
- *-*-freebsd[1234]*)
-
- # Before FreeBSD 5, it didn't have -lpthread (or any library which
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ # We can compile using X headers with no special include directory.
+ac_x_includes=
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ # Look for the header file in a standard set of common directories.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+ for ac_dir in \
+ /usr/X11/include \
+ /usr/X11R6/include \
+ /usr/X11R5/include \
+ /usr/X11R4/include \
+ \
+ /usr/include/X11 \
+ /usr/include/X11R6 \
+ /usr/include/X11R5 \
+ /usr/include/X11R4 \
+ \
+ /usr/local/X11/include \
+ /usr/local/X11R6/include \
+ /usr/local/X11R5/include \
+ /usr/local/X11R4/include \
+ \
+ /usr/local/include/X11 \
+ /usr/local/include/X11R6 \
+ /usr/local/include/X11R5 \
+ /usr/local/include/X11R4 \
+ \
+ /usr/X386/include \
+ /usr/x386/include \
+ /usr/XFree86/include/X11 \
+ \
+ /usr/include \
+ /usr/local/include \
+ /usr/unsupported/include \
+ /usr/athena/include \
+ /usr/local/x11r5/include \
+ /usr/lpp/Xamples/include \
+ \
+ /usr/openwin/include \
+ /usr/openwin/share/include \
+ ; \
+ do
+ if test -r "$ac_dir/$x_direct_test_include"; then
+ ac_x_includes=$ac_dir
+ break
+ fi
+ done
+fi
+rm -f conftest*
+fi # $ac_x_includes = NO
+
+if test "$ac_x_libraries" = NO; then
+ # Check for the libraries.
+
+ test -z "$x_direct_test_library" && x_direct_test_library=Xt
+ test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
+
+ # See if we find them without any special options.
+ # Don't add to $LIBS permanently.
+ ac_save_LIBS="$LIBS"
+ LIBS="-l$x_direct_test_library $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3353 "configure"
+#include "confdefs.h"
+
+int main() {
+${x_direct_test_function}()
+; return 0; }
+EOF
+if { (eval echo configure:3360: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ LIBS="$ac_save_LIBS"
+# We can link X programs with no special library path.
+ac_x_libraries=
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ LIBS="$ac_save_LIBS"
+# First see if replacing the include by lib works.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
+ /usr/X11/lib \
+ /usr/X11R6/lib \
+ /usr/X11R5/lib \
+ /usr/X11R4/lib \
+ \
+ /usr/lib/X11 \
+ /usr/lib/X11R6 \
+ /usr/lib/X11R5 \
+ /usr/lib/X11R4 \
+ \
+ /usr/local/X11/lib \
+ /usr/local/X11R6/lib \
+ /usr/local/X11R5/lib \
+ /usr/local/X11R4/lib \
+ \
+ /usr/local/lib/X11 \
+ /usr/local/lib/X11R6 \
+ /usr/local/lib/X11R5 \
+ /usr/local/lib/X11R4 \
+ \
+ /usr/X386/lib \
+ /usr/x386/lib \
+ /usr/XFree86/lib/X11 \
+ \
+ /usr/lib \
+ /usr/local/lib \
+ /usr/unsupported/lib \
+ /usr/athena/lib \
+ /usr/local/x11r5/lib \
+ /usr/lpp/Xamples/lib \
+ /lib/usr/lib/X11 \
+ \
+ /usr/openwin/lib \
+ /usr/openwin/share/lib \
+ ; \
+do
+ for ac_extension in a so sl; do
+ if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
+ ac_x_libraries=$ac_dir
+ break 2
+ fi
+ done
+done
+fi
+rm -f conftest*
+fi # $ac_x_libraries = NO
+
+if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
+ # Didn't find X anywhere. Cache the known absence of X.
+ ac_cv_have_x="have_x=no"
+else
+ # Record where we found X for the cache.
+ ac_cv_have_x="have_x=yes \
+ ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
+fi
+fi
+ fi
+ eval "$ac_cv_have_x"
+fi # $with_x != no
+
+if test "$have_x" != yes; then
+ echo "$ac_t""$have_x" 1>&6
+ no_x=yes
+else
+ # If each of the values was on the command line, it overrides each guess.
+ test "x$x_includes" = xNONE && x_includes=$ac_x_includes
+ test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
+ # Update the cache value to reflect the command line values.
+ ac_cv_have_x="have_x=yes \
+ ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
+ echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
+fi
+
+if test "$no_x" = yes; then
+ # Not all programs may use this symbol, but it does not hurt to define it.
+ cat >> confdefs.h <<\EOF
+#define X_DISPLAY_MISSING 1
+EOF
+
+ X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
+else
+ if test -n "$x_includes"; then
+ X_CFLAGS="$X_CFLAGS -I$x_includes"
+ fi
+
+ # It would also be nice to do this for all -L options, not just this one.
+ if test -n "$x_libraries"; then
+ X_LIBS="$X_LIBS -L$x_libraries"
+ # For Solaris; some versions of Sun CC require a space after -R and
+ # others require no space. Words are not sufficient . . . .
+ case "`(uname -sr) 2>/dev/null`" in
+ "SunOS 5"*)
+ echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
+echo "configure:3466: checking whether -R must be followed by a space" >&5
+ ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
+ cat > conftest.$ac_ext <<EOF
+#line 3469 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:3476: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_R_nospace=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_R_nospace=no
+fi
+rm -f conftest*
+ if test $ac_R_nospace = yes; then
+ echo "$ac_t""no" 1>&6
+ X_LIBS="$X_LIBS -R$x_libraries"
+ else
+ LIBS="$ac_xsave_LIBS -R $x_libraries"
+ cat > conftest.$ac_ext <<EOF
+#line 3492 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:3499: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_R_space=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_R_space=no
+fi
+rm -f conftest*
+ if test $ac_R_space = yes; then
+ echo "$ac_t""yes" 1>&6
+ X_LIBS="$X_LIBS -R $x_libraries"
+ else
+ echo "$ac_t""neither works" 1>&6
+ fi
+ fi
+ LIBS="$ac_xsave_LIBS"
+ esac
+ fi
+
+ # Check for system-dependent libraries X programs must link with.
+ # Do this before checking for the system-independent R6 libraries
+ # (-lICE), since we may need -lsocket or whatever for X linking.
+
+ if test "$ISC" = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
+ else
+ # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X
+ # libraries were built with DECnet support. And karl@cs.umb.edu says
+ # the Alpha needs dnet_stub (dnet does not exist).
+ echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
+echo "configure:3531: checking for dnet_ntoa in -ldnet" >&5
+ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldnet $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3539 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa();
+
+int main() {
+dnet_ntoa()
+; return 0; }
+EOF
+if { (eval echo configure:3550: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_lib_dnet_dnet_ntoa = no; then
+ echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
+echo "configure:3572: checking for dnet_ntoa in -ldnet_stub" >&5
+ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldnet_stub $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3580 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa();
+
+int main() {
+dnet_ntoa()
+; return 0; }
+EOF
+if { (eval echo configure:3591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
+ # to get the SysV transport functions.
+ # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4)
+ # needs -lnsl.
+ # The nsl library prevents programs from opening the X display
+ # on Irix 5.2, according to dickey@clark.net.
+ echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
+echo "configure:3620: checking for gethostbyname" >&5
+if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3625 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char gethostbyname(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
+choke me
+#else
+gethostbyname();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_gethostbyname=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_gethostbyname=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_func_gethostbyname = no; then
+ echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
+echo "configure:3669: checking for gethostbyname in -lnsl" >&5
+ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lnsl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3677 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname();
+
+int main() {
+gethostbyname()
+; return 0; }
+EOF
+if { (eval echo configure:3688: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ # lieder@skyler.mavd.honeywell.com says without -lsocket,
+ # socket/setsockopt and other routines are undefined under SCO ODT
+ # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary
+ # on later versions), says simon@lia.di.epfl.ch: it contains
+ # gethostby* variants that don't use the nameserver (or something).
+ # -lsocket must be given before -lnsl if both are needed.
+ # We assume that if connect needs -lnsl, so does gethostbyname.
+ echo $ac_n "checking for connect""... $ac_c" 1>&6
+echo "configure:3718: checking for connect" >&5
+if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3723 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char connect(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_connect) || defined (__stub___connect)
+choke me
+#else
+connect();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_connect=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_connect=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_func_connect = no; then
+ echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
+echo "configure:3767: checking for connect in -lsocket" >&5
+ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3775 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect();
+
+int main() {
+connect()
+; return 0; }
+EOF
+if { (eval echo configure:3786: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
+ echo $ac_n "checking for remove""... $ac_c" 1>&6
+echo "configure:3810: checking for remove" >&5
+if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3815 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char remove(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char remove();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_remove) || defined (__stub___remove)
+choke me
+#else
+remove();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3838: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_remove=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_remove=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_func_remove = no; then
+ echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
+echo "configure:3859: checking for remove in -lposix" >&5
+ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lposix $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3867 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char remove();
+
+int main() {
+remove()
+; return 0; }
+EOF
+if { (eval echo configure:3878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+
+ # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
+ echo $ac_n "checking for shmat""... $ac_c" 1>&6
+echo "configure:3902: checking for shmat" >&5
+if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3907 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char shmat(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shmat();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_shmat) || defined (__stub___shmat)
+choke me
+#else
+shmat();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3930: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_shmat=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_shmat=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_func_shmat = no; then
+ echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
+echo "configure:3951: checking for shmat in -lipc" >&5
+ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lipc $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3959 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shmat();
+
+int main() {
+shmat()
+; return 0; }
+EOF
+if { (eval echo configure:3970: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ fi
+
+ # Check for libraries that X11R6 Xt/Xaw programs need.
+ ac_save_LDFLAGS="$LDFLAGS"
+ test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
+ # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
+ # check for ICE first), but we must link in the order -lSM -lICE or
+ # we get undefined symbols. So assume we have SM if we have ICE.
+ # These have to be linked with before -lX11, unlike the other
+ # libraries we check for below, so use a different variable.
+ # --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
+ echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
+echo "configure:4003: checking for IceConnectionNumber in -lICE" >&5
+ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lICE $X_EXTRA_LIBS $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4011 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char IceConnectionNumber();
+
+int main() {
+IceConnectionNumber()
+; return 0; }
+EOF
+if { (eval echo configure:4022: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ LDFLAGS="$ac_save_LDFLAGS"
+
+fi
+
+
+# Check whether --enable-java-awt or --disable-java-awt was given.
+if test "${enable_java_awt+set}" = set; then
+ enableval="$enable_java_awt"
+ :
+fi
+
+
+peerlibs="`echo ${enable_java_awt} | tr ',' ' '`"
+use_xlib_awt=""
+use_gtk_awt=""
+# The default toolkit to use is the first one specified.
+TOOLKIT=
+
+
+for peer in $peerlibs ; do
+ case $peer in
+ xlib)
+ if test "$no_x" = yes; then
+ echo "*** xlib peers requested but no X library available" 1>&2
+ exit 1
+ else
+ use_xlib_awt="yes"
+ if test -z "$TOOLKIT"; then
+ TOOLKIT=gnu.awt.xlib.XToolkit
+ fi
+ fi
+ ;;
+ gtk)
+ if test "$no_x" = yes; then
+ echo "*** xlib peers requested but no X library available" 1>&2
+ exit 1
+ else
+ use_gtk_awt=yes
+ if test -z "$TOOLKIT"; then
+ TOOLKIT=gnu.java.awt.peer.gtk.GtkToolkit
+ fi
+ test -d jniinclude || mkdir jniinclude
+ fi
+ ;;
+ no)
+ use_xlib_awt=
+ use_gtk_awt=
+ break
+ ;;
+ *)
+ echo "*** unrecognised argument \"${peer}\" for --enable-java-awt" 1>&2
+ exit 1
+ esac
+done
+
+
+
+if test "$use_xlib_awt" = yes; then
+ XLIB_AWT_TRUE=
+ XLIB_AWT_FALSE='#'
+else
+ XLIB_AWT_TRUE='#'
+ XLIB_AWT_FALSE=
+fi
+
+
+if test "$use_gtk_awt" = yes; then
+ GTK_AWT_TRUE=
+ GTK_AWT_FALSE='#'
+else
+ GTK_AWT_TRUE='#'
+ GTK_AWT_FALSE=
+fi
+
+
+libsubdir=.libs
+
+echo $ac_n "checking for garbage collector to use""... $ac_c" 1>&6
+echo "configure:4120: checking for garbage collector to use" >&5
+# Check whether --enable-java-gc or --disable-java-gc was given.
+if test "${enable_java_gc+set}" = set; then
+ enableval="$enable_java_gc"
+
+ GC=$enableval
+else
+ GC=boehm
+fi
+
+GCLIBS=
+GCINCS=
+GCDEPS=
+GCOBJS=
+GCSPEC=
+JC1GCSPEC=
+GCTESTSPEC=
+case "$GC" in
+ boehm)
+ echo "$ac_t""boehm" 1>&6
+ GCLIBS=../boehm-gc/libgcjgc_convenience.la
+ JC1GCSPEC='-fuse-boehm-gc'
+ GCTESTSPEC="-L`${PWDCMD-pwd}`/../boehm-gc/.libs -rpath `${PWDCMD-pwd}`/../boehm-gc/.libs"
+
+ GCINCS="`cat ../boehm-gc/boehm-cflags`"
+ GCOBJS=boehm.lo
+ GCHDR=boehm-gc.h
+ cat >> confdefs.h <<\EOF
+#define HAVE_BOEHM_GC 1
+EOF
+
+ ;;
+ no)
+ echo "$ac_t""none" 1>&6
+ GCOBJS=nogc.lo
+ GCHDR=no-gc.h
+ ;;
+ *)
+ { echo "configure: error: unrecognized collector \"$GC\"" 1>&2; exit 1; }
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+echo $ac_n "checking for thread model used by GCC""... $ac_c" 1>&6
+echo "configure:4172: checking for thread model used by GCC" >&5
+THREADS=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
+echo "$ac_t""$THREADS" 1>&6
+
+case "$THREADS" in
+ no | none | single)
+ THREADS=none
+ ;;
+ posix | pthreads)
+ THREADS=posix
+ case "$host" in
+ *-*-linux*)
+ cat >> confdefs.h <<\EOF
+#define LINUX_THREADS 1
+EOF
+
+ ;;
+ esac
+ ;;
+ win32)
+ ;;
+ decosf1 | irix | mach | os2 | solaris | dce | vxworks)
+ { echo "configure: error: thread package $THREADS not yet supported" 1>&2; exit 1; }
+ ;;
+ *)
+ { echo "configure: error: $THREADS is an unknown thread package" 1>&2; exit 1; }
+ ;;
+esac
+
+THREADCXXFLAGS=
+THREADLDFLAGS=
+THREADLIBS=
+THREADINCS=
+THREADDEPS=
+THREADOBJS=
+THREADH=
+THREADSPEC=
+case "$THREADS" in
+ posix)
+ case "$host" in
+ *-*-cygwin*)
+ # Don't set THREADLIBS here. Cygwin doesn't have -lpthread.
+ ;;
+
+ *-*-freebsd[1234]*)
+
+ # Before FreeBSD 5, it didn't have -lpthread (or any library which
# merely adds pthread_* functions) but it does have a -pthread switch
# which is required at link-time to select -lc_r *instead* of -lc.
- THREADLIBS=-pthread
+ THREADLDFLAGS=-pthread
# Don't set THREADSPEC here as might be expected since -pthread is
# not processed when found within a spec file, it must come from
# the command line. For now, the user must provide the -pthread
# FreeBSD 5 implements a model much closer to other modern UNIX
# which support threads. However, it still does not support
# -lpthread.
- THREADLIBS=-pthread
+ THREADLDFLAGS=-pthread
THREADSPEC=-lc_r
;;
+ alpha*-dec-osf*)
+ THREADCXXFLAGS=-pthread
+ # boehm-gc needs some functions from librt, so link that too.
+ THREADLIBS='-lpthread -lrt'
+ THREADSPEC='-lpthread -lrt'
+ ;;
*)
THREADLIBS=-lpthread
THREADSPEC=-lpthread
+
+
+if test -d sysdep; then true; else mkdir sysdep; fi
+
+
HASH_SYNC_SPEC=
# Hash synchronization is only useful with posix threads right now.
-if test "$enable_hash_synchronization" = yes && test "$THREADS" = "posix"; then
+if test "$enable_hash_synchronization" = yes && test "$THREADS" != "none"; then
HASH_SYNC_SPEC=-fhash-synchronization
cat >> confdefs.h <<\EOF
#define JV_HASH_SYNCHRONIZATION 1
# We're in the tree with gcc, and need to include some of its headers.
GCC_UNWIND_INCLUDE='-I$(libgcj_basedir)/../gcc'
-if test -n "${with_cross_host}"; then
+# Figure out where generated headers like libgcj-config.h get installed.
+gcc_version_trigger=${libgcj_basedir}/../gcc/version.c
+gcc_version_full=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^\"]*\)\".*/\1/'`
+gcc_version=`echo ${gcc_version_full} | sed -e 's/\([^ ]*\) .*/\1/'`
+tool_include_dir='$(libdir)/gcc/$(target_alias)/'${gcc_version}/include
+
+
+
+if test "x${with_newlib}" = "xyes"; then
# We are being configured with a cross compiler. AC_REPLACE_FUNCS
# may not work correctly, because the compiler may not be able to
# link executables.
EOF
cat >> confdefs.h <<\EOF
+#define HAVE_TIME 1
+EOF
+
+ cat >> confdefs.h <<\EOF
#define HAVE_GMTIME_R 1
EOF
#define NO_GETUID 1
EOF
-
- ZLIBSPEC=-lzgcj
- ZLIBTESTSPEC="-L`pwd`/../zlib/.libs -rpath `pwd`/../zlib/.libs"
-
- # If Canadian cross, then don't pick up tools from the build
- # directory.
- if test x"$build" != x"$with_cross_host" && x"$build" != x"$target"; then
- CANADIAN=yes
- GCC_UNWIND_INCLUDE=
- GCJ="${target_alias}-gcj"
- fi
- NATIVE=no
+ PLATFORMNET=NoNet
else
for ac_func in strerror ioctl select fstat open fsync sleep opendir
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3370: checking for $ac_func" >&5
+echo "configure:4379: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3375 "configure"
+#line 4384 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3398: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4407: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in gmtime_r localtime_r readdir_r getpwuid_r getcwd
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3425: checking for $ac_func" >&5
+echo "configure:4434: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3430 "configure"
+#line 4439 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3453: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in access stat mkdir rename rmdir unlink realpath utime chmod
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3480: checking for $ac_func" >&5
+echo "configure:4489: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3485 "configure"
+#line 4494 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3508: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in nl_langinfo setlocale
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3535: checking for $ac_func" >&5
+echo "configure:4544: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3540 "configure"
+#line 4549 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4572: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in inet_aton inet_addr
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3590: checking for $ac_func" >&5
+echo "configure:4599: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3595 "configure"
+#line 4604 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3618: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4627: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in inet_pton uname inet_ntoa
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3645: checking for $ac_func" >&5
+echo "configure:4654: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3650 "configure"
+#line 4659 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3673: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
- for ac_func in backtrace fork execvp pipe sigaction
+ for ac_func in fork execvp pipe sigaction ftruncate
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3700: checking for $ac_func" >&5
+echo "configure:4709: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3705 "configure"
+#line 4714 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3728: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3756: checking for $ac_hdr" >&5
+echo "configure:4765: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3761 "configure"
+#line 4770 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3766: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4775: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
+ echo $ac_n "checking for backtrace""... $ac_c" 1>&6
+echo "configure:4802: checking for backtrace" >&5
+if eval "test \"`echo '$''{'ac_cv_func_backtrace'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 4807 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char backtrace(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char backtrace();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_backtrace) || defined (__stub___backtrace)
+choke me
+#else
+backtrace();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:4830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_backtrace=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_backtrace=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'backtrace`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+
+ case "$host" in
+ ia64-*-linux*)
+ # Has broken backtrace()
+ ;;
+ *)
+ cat >> confdefs.h <<\EOF
+#define HAVE_BACKTRACE 1
+EOF
+
+ ;;
+ esac
+
+else
+ echo "$ac_t""no" 1>&6
+
+ case "$host" in
+ *mingw*)
+ # Has backtrace() defined in libgcj itself
+ cat >> confdefs.h <<\EOF
+#define HAVE_BACKTRACE 1
+EOF
+
+ ;;
+ esac
+
+fi
+
+
echo $ac_n "checking for dladdr in -ldl""... $ac_c" 1>&6
-echo "configure:3793: checking for dladdr in -ldl" >&5
+echo "configure:4874: checking for dladdr in -ldl" >&5
ac_lib_var=`echo dl'_'dladdr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3801 "configure"
+#line 4882 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dladdr()
; return 0; }
EOF
-if { (eval echo configure:3812: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4893: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
fi
- for ac_file in /proc/self/exe
+ if test x"$build" = x"$host"; then
+ for ac_file in /proc/self/exe
do
ac_safe=`echo "$ac_file" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_file""... $ac_c" 1>&6
-echo "configure:3841: checking for $ac_file" >&5
+echo "configure:4923: checking for $ac_file" >&5
if eval "test \"`echo '$''{'ac_cv_file_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
#define $ac_tr_file 1
EOF
- cat >> confdefs.h <<\EOF
+ cat >> confdefs.h <<\EOF
#define HAVE_PROC_SELF_EXE 1
EOF
fi
done
+ else
+ case $host in
+ *-linux*)
+ cat >> confdefs.h <<\EOF
+#define HAVE_PROC_SELF_EXE 1
+EOF
+
+ ;;
+ esac
+ fi
echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:3889: checking for iconv" >&5
+echo "configure:4981: checking for iconv" >&5
if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
cat > conftest.$ac_ext <<EOF
-#line 3897 "configure"
+#line 4989 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:3907: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4999: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_func_iconv=yes
else
am_save_LIBS="$LIBS"
LIBS="$LIBS $am_cv_libiconv_ldpath -liconv"
cat > conftest.$ac_ext <<EOF
-#line 3919 "configure"
+#line 5011 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:3929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_lib_iconv=yes
am_cv_func_iconv=yes
EOF
echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
-echo "configure:3950: checking for iconv declaration" >&5
+echo "configure:5042: checking for iconv declaration" >&5
if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3956 "configure"
+#line 5048 "configure"
#include "confdefs.h"
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:3975: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5067: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
am_cv_proto_iconv_arg1=""
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:4004: checking for LC_MESSAGES" >&5
+echo "configure:5096: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4009 "configure"
+#line 5101 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:4016: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5108: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:4037: checking whether struct tm is in sys/time.h or time.h" >&5
+echo "configure:5129: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4042 "configure"
+#line 5134 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
-if { (eval echo configure:4050: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5142: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm=time.h
else
fi
echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6
-echo "configure:4071: checking for tm_zone in struct tm" >&5
+echo "configure:5163: checking for tm_zone in struct tm" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4076 "configure"
+#line 5168 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_cv_struct_tm>
struct tm tm; tm.tm_zone;
; return 0; }
EOF
-if { (eval echo configure:4084: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5176: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm_zone=yes
else
else
echo $ac_n "checking for tzname""... $ac_c" 1>&6
-echo "configure:4104: checking for tzname" >&5
+echo "configure:5196: checking for tzname" >&5
if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4109 "configure"
+#line 5201 "configure"
#include "confdefs.h"
#include <time.h>
#ifndef tzname /* For SGI. */
atoi(*tzname);
; return 0; }
EOF
-if { (eval echo configure:4119: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_var_tzname=yes
else
for ac_func in gethostbyname_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4144: checking for $ac_func" >&5
+echo "configure:5236: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4149 "configure"
+#line 5241 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4172: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5264: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# We look for the one that returns `int'.
# Hopefully this check is robust enough.
cat > conftest.$ac_ext <<EOF
-#line 4199 "configure"
+#line 5291 "configure"
#include "confdefs.h"
#include <netdb.h>
EOF
*" -D_REENTRANT "*) ;;
*)
echo $ac_n "checking whether gethostbyname_r declaration requires -D_REENTRANT""... $ac_c" 1>&6
-echo "configure:4219: checking whether gethostbyname_r declaration requires -D_REENTRANT" >&5
+echo "configure:5311: checking whether gethostbyname_r declaration requires -D_REENTRANT" >&5
if eval "test \"`echo '$''{'libjava_cv_gethostbyname_r_needs_reentrant'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cxx_cross
cat > conftest.$ac_ext <<EOF
-#line 4232 "configure"
+#line 5324 "configure"
#include "confdefs.h"
#include <netdb.h>
int main() {
gethostbyname_r("", 0, 0);
; return 0; }
EOF
-if { (eval echo configure:4239: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5331: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libjava_cv_gethostbyname_r_needs_reentrant=no
else
CPPFLAGS_SAVE="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS -D_REENTRANT"
cat > conftest.$ac_ext <<EOF
-#line 4249 "configure"
+#line 5341 "configure"
#include "confdefs.h"
#include <netdb.h>
int main() {
gethostbyname_r("", 0, 0);
; return 0; }
EOF
-if { (eval echo configure:4256: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5348: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libjava_cv_gethostbyname_r_needs_reentrant=yes
else
esac
echo $ac_n "checking for struct hostent_data""... $ac_c" 1>&6
-echo "configure:4291: checking for struct hostent_data" >&5
+echo "configure:5383: checking for struct hostent_data" >&5
if eval "test \"`echo '$''{'libjava_cv_struct_hostent_data'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4296 "configure"
+#line 5388 "configure"
#include "confdefs.h"
#if GETHOSTBYNAME_R_NEEDS_REENTRANT && !defined(_REENTRANT)
struct hostent_data data;
; return 0; }
EOF
-if { (eval echo configure:4307: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5399: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libjava_cv_struct_hostent_data=yes
else
# to exist where expected. (The root issue: AC_CHECK_FUNCS assumes C
# linkage check is enough, yet C++ code requires proper prototypes.)
cat > conftest.$ac_ext <<EOF
-#line 4339 "configure"
+#line 5431 "configure"
#include "confdefs.h"
#include <netdb.h>
EOF
for ac_func in gethostbyaddr_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4350: checking for $ac_func" >&5
+echo "configure:5442: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4355 "configure"
+#line 5447 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4378: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5470: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# We look for the one that returns `int'.
# Hopefully this check is robust enough.
cat > conftest.$ac_ext <<EOF
-#line 4405 "configure"
+#line 5497 "configure"
#include "confdefs.h"
#include <netdb.h>
EOF
done
fi
-rm -f conftest*
+rm -f conftest*
+
+
+ for ac_func in gethostname
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:5524: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 5529 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:5552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HAVE_GETHOSTNAME 1
+EOF
+
+ cat > conftest.$ac_ext <<EOF
+#line 5576 "configure"
+#include "confdefs.h"
+#include <unistd.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "gethostname" >/dev/null 2>&1; then
+ rm -rf conftest*
+
+ cat >> confdefs.h <<\EOF
+#define HAVE_GETHOSTNAME_DECL 1
+EOF
+
+fi
+rm -f conftest*
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
- for ac_func in gethostname
+ for ac_func in usleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4432: checking for $ac_func" >&5
+echo "configure:5600: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4437 "configure"
+#line 5605 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4460: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5628: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
#define $ac_tr_func 1
EOF
- cat >> confdefs.h <<\EOF
-#define HAVE_GETHOSTNAME 1
-EOF
-
cat > conftest.$ac_ext <<EOF
-#line 4484 "configure"
+#line 5648 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "gethostname" >/dev/null 2>&1; then
+ egrep "usleep" >/dev/null 2>&1; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
-#define HAVE_GETHOSTNAME_DECL 1
+#define HAVE_USLEEP_DECL 1
EOF
fi
for ac_func in pthread_mutexattr_settype pthread_mutexattr_setkind_np
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4515: checking for $ac_func" >&5
+echo "configure:5679: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4520 "configure"
+#line 5684 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5707: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in sched_yield
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4573: checking for $ac_func" >&5
+echo "configure:5737: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4578 "configure"
+#line 5742 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5765: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_yield in -lrt""... $ac_c" 1>&6
-echo "configure:4623: checking for sched_yield in -lrt" >&5
+echo "configure:5787: checking for sched_yield in -lrt" >&5
ac_lib_var=`echo rt'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lrt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4631 "configure"
+#line 5795 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:4642: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_yield in -lposix4""... $ac_c" 1>&6
-echo "configure:4668: checking for sched_yield in -lposix4" >&5
+echo "configure:5832: checking for sched_yield in -lposix4" >&5
ac_lib_var=`echo posix4'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4676 "configure"
+#line 5840 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:4687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5851: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# We can save a little space at runtime if the mutex has m_count
# or __m_count. This is a nice hack for Linux.
cat > conftest.$ac_ext <<EOF
-#line 4723 "configure"
+#line 5887 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:4732: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5896: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define PTHREAD_MUTEX_HAVE_M_COUNT 1
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 4744 "configure"
+#line 5908 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:4753: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5917: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define PTHREAD_MUTEX_HAVE___M_COUNT 1
for ac_func in gettimeofday time ftime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4773: checking for $ac_func" >&5
+echo "configure:5937: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4778 "configure"
+#line 5942 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5965: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in memmove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4832: checking for $ac_func" >&5
+echo "configure:5996: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4837 "configure"
+#line 6001 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4860: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6024: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in memcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4890: checking for $ac_func" >&5
+echo "configure:6054: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4895 "configure"
+#line 6059 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6082: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:4947: checking for dlopen in -ldl" >&5
+echo "configure:6111: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4955 "configure"
+#line 6119 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
char dlopen();
int main() {
-dlopen()
-; return 0; }
-EOF
-if { (eval echo configure:4966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
-
- cat >> confdefs.h <<\EOF
-#define HAVE_DLOPEN 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
- # Some library-finding code we stole from Tcl.
- #--------------------------------------------------------------------
- # Check for the existence of the -lsocket and -lnsl libraries.
- # The order here is important, so that they end up in the right
- # order in the command line generated by make. Here are some
- # special considerations:
- # 1. Use "connect" and "accept" to check for -lsocket, and
- # "gethostbyname" to check for -lnsl.
- # 2. Use each function name only once: can't redo a check because
- # autoconf caches the results of the last check and won't redo it.
- # 3. Use -lnsl and -lsocket only if they supply procedures that
- # aren't already present in the normal libraries. This is because
- # IRIX 5.2 has libraries, but they aren't needed and they're
- # bogus: they goof up name resolution if used.
- # 4. On some SVR4 systems, can't use -lsocket without -lnsl too.
- # To get around this problem, check for both libraries together
- # if -lsocket doesn't work by itself.
- #--------------------------------------------------------------------
-
- echo $ac_n "checking for socket libraries""... $ac_c" 1>&6
-echo "configure:5011: checking for socket libraries" >&5
-if eval "test \"`echo '$''{'gcj_cv_lib_sockets'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- gcj_cv_lib_sockets=
- gcj_checkBoth=0
- unset ac_cv_func_connect
- echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:5019: checking for connect" >&5
-if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5024 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char connect(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char connect();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_connect) || defined (__stub___connect)
-choke me
-#else
-connect();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:5047: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_connect=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_connect=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- gcj_checkSocket=0
-else
- echo "$ac_t""no" 1>&6
-gcj_checkSocket=1
-fi
-
- if test "$gcj_checkSocket" = 1; then
- unset ac_cv_func_connect
- echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6
-echo "configure:5070: checking for main in -lsocket" >&5
-ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lsocket $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 5078 "configure"
-#include "confdefs.h"
-
-int main() {
-main()
-; return 0; }
-EOF
-if { (eval echo configure:5085: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- gcj_cv_lib_sockets="-lsocket"
-else
- echo "$ac_t""no" 1>&6
-gcj_checkBoth=1
-fi
-
- fi
- if test "$gcj_checkBoth" = 1; then
- gcj_oldLibs=$LIBS
- LIBS="$LIBS -lsocket -lnsl"
- unset ac_cv_func_accept
- echo $ac_n "checking for accept""... $ac_c" 1>&6
-echo "configure:5112: checking for accept" >&5
-if eval "test \"`echo '$''{'ac_cv_func_accept'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5117 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char accept(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char accept();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_accept) || defined (__stub___accept)
-choke me
-#else
-accept();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:5140: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_accept=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_accept=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'accept`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- gcj_checkNsl=0
- gcj_cv_lib_sockets="-lsocket -lnsl"
-else
- echo "$ac_t""no" 1>&6
-fi
-
- unset ac_cv_func_accept
- LIBS=$gcj_oldLibs
- fi
- unset ac_cv_func_gethostbyname
- gcj_oldLibs=$LIBS
- LIBS="$LIBS $gcj_cv_lib_sockets"
- echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:5167: checking for gethostbyname" >&5
-if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5172 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char gethostbyname(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char gethostbyname();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
-choke me
-#else
-gethostbyname();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:5195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_gethostbyname=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_gethostbyname=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
-echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
-echo "configure:5213: checking for main in -lnsl" >&5
-ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lnsl $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 5221 "configure"
-#include "confdefs.h"
-
-int main() {
-main()
+dlopen()
; return 0; }
EOF
-if { (eval echo configure:5228: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6130: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- gcj_cv_lib_sockets="$gcj_cv_lib_sockets -lnsl"
+
+ cat >> confdefs.h <<\EOF
+#define HAVE_DLOPEN 1
+EOF
+
else
echo "$ac_t""no" 1>&6
fi
-fi
-
- unset ac_cv_func_gethostbyname
- LIBS=$gcj_oldLIBS
-
-fi
-echo "$ac_t""$gcj_cv_lib_sockets" 1>&6
- SYSTEMSPEC="$SYSTEMSPEC $gcj_cv_lib_sockets"
+ # Some library-finding code we stole from Tcl.
+ #--------------------------------------------------------------------
+ # Check for the existence of the -lsocket and -lnsl libraries.
+ # The order here is important, so that they end up in the right
+ # order in the command line generated by make. Here are some
+ # special considerations:
+ # 1. Use "connect" and "accept" to check for -lsocket, and
+ # "gethostbyname" to check for -lnsl.
+ # 2. Use each function name only once: can't redo a check because
+ # autoconf caches the results of the last check and won't redo it.
+ # 3. Use -lnsl and -lsocket only if they supply procedures that
+ # aren't already present in the normal libraries. This is because
+ # IRIX 5.2 has libraries, but they aren't needed and they're
+ # bogus: they goof up name resolution if used.
+ # 4. On some SVR4 systems, can't use -lsocket without -lnsl too.
+ # To get around this problem, check for both libraries together
+ # if -lsocket doesn't work by itself.
+ #--------------------------------------------------------------------
- if test "$with_system_zlib" = yes; then
- echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6
-echo "configure:5260: checking for deflate in -lz" >&5
-ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "checking for socket libraries""... $ac_c" 1>&6
+echo "configure:6175: checking for socket libraries" >&5
+if eval "test \"`echo '$''{'gcj_cv_lib_sockets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- ac_save_LIBS="$LIBS"
-LIBS="-lz $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 5268 "configure"
+ gcj_cv_lib_sockets=
+ gcj_checkBoth=0
+ unset ac_cv_func_connect
+ echo $ac_n "checking for connect""... $ac_c" 1>&6
+echo "configure:6183: checking for connect" >&5
+if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 6188 "configure"
#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char connect(); below. */
+#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char deflate();
+char connect();
int main() {
-deflate()
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_connect) || defined (__stub___connect)
+choke me
+#else
+connect();
+#endif
+
; return 0; }
EOF
-if { (eval echo configure:5279: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ eval "ac_cv_func_connect=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ eval "ac_cv_func_connect=no"
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
-
fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+
+if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ZLIBSPEC=-lz
+ gcj_checkSocket=0
else
echo "$ac_t""no" 1>&6
-ZLIBSPEC=-lzgcj
+gcj_checkSocket=1
fi
- else
- ZLIBSPEC=-lzgcj
- ZLIBTESTSPEC="-L`pwd`/../zlib/.libs -rpath `pwd`/../zlib/.libs"
- fi
-
- # On Solaris, and maybe other architectures, the Boehm collector
- # requires -ldl.
- if test "$GC" = boehm; then
- echo $ac_n "checking for main in -ldl""... $ac_c" 1>&6
-echo "configure:5309: checking for main in -ldl" >&5
-ac_lib_var=`echo dl'_'main | sed 'y%./+-%__p_%'`
+ if test "$gcj_checkSocket" = 1; then
+ unset ac_cv_func_connect
+ echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6
+echo "configure:6234: checking for main in -lsocket" >&5
+ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
-LIBS="-ldl $LIBS"
+LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5317 "configure"
+#line 6242 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:5324: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- SYSTEMSPEC="$SYSTEMSPEC -ldl"
+ gcj_cv_lib_sockets="-lsocket"
else
echo "$ac_t""no" 1>&6
+gcj_checkBoth=1
fi
- fi
-
- if test -z "${with_multisubdir}"; then
- builddotdot=.
- else
-
- builddotdot=`echo ${with_multisubdir} | sed -e 's:[^/][^/]*:..:g'`
-
- fi
- if test -x "${builddotdot}/../../gcc/gcj"; then
- dir="`cd ${builddotdot}/../../gcc && pwd`"
- GCJ="$dir/gcj -B`pwd`/ -B$dir/"
- else
- CANADIAN=yes
- NULL_TARGET=yes
- GCJ="gcj -B`pwd`/"
- fi
-fi
-
-# Create it, so that compile/link tests don't fail
-test -f libgcj.spec || touch libgcj.spec
-
-# We must search the source tree for java.lang, since we still don't
-# have libgcj.jar nor java/lang/*.class
-GCJ_SAVE_CPPFLAGS=$CPPFLAGS
-CPPFLAGS="$CPPFLAGS -I`pwd` -I`cd $srcdir && pwd`"
-
-# Since some classes depend on this one, we need its source available
-# before we can do any GCJ compilation test :-(
-if test ! -f gnu/classpath/Configuration.java; then
- test -d gnu || mkdir gnu
- test -d gnu/classpath || mkdir gnu/classpath
- sed 's,@LIBGCJDEBUG@,$LIBGCJDEBUG,' \
- < $srcdir/gnu/classpath/Configuration.java.in \
- > gnu/classpath/Configuration.java
- # We do not want to redirect the output of the grep below to /dev/null,
- # but we add /dev/null to the input list so that grep will print the
- # filename of Configuration.java in case it finds any matches.
- if grep @ gnu/classpath/Configuration.java /dev/null; then
- { echo "configure: error: configure.in is missing the substitutions above" 1>&2; exit 1; }
- fi
-fi
-
-# Extract the first word of "${ac_tool_prefix}gcj", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcj; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5390: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCJ'+set}'`\" = set"; then
+ fi
+ if test "$gcj_checkBoth" = 1; then
+ gcj_oldLibs=$LIBS
+ LIBS="$LIBS -lsocket -lnsl"
+ unset ac_cv_func_accept
+ echo $ac_n "checking for accept""... $ac_c" 1>&6
+echo "configure:6276: checking for accept" >&5
+if eval "test \"`echo '$''{'ac_cv_func_accept'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$GCJ"; then
- ac_cv_prog_GCJ="$GCJ" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCJ="${ac_tool_prefix}gcj"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-GCJ="$ac_cv_prog_GCJ"
-if test -n "$GCJ"; then
- echo "$ac_t""$GCJ" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
+ cat > conftest.$ac_ext <<EOF
+#line 6281 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char accept(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char accept();
+int main() {
-if test -z "$ac_cv_prog_GCJ"; then
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "gcj", so it can be a program name with args.
-set dummy gcj; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5422: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_GCJ'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$GCJ"; then
- ac_cv_prog_GCJ="$GCJ" # Let the user override the test.
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_accept) || defined (__stub___accept)
+choke me
+#else
+accept();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:6304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_accept=yes"
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_GCJ="gcj"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_GCJ" && ac_cv_prog_GCJ="no"
-fi
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_accept=no"
fi
-GCJ="$ac_cv_prog_GCJ"
-if test -n "$GCJ"; then
- echo "$ac_t""$GCJ" 1>&6
-else
- echo "$ac_t""no" 1>&6
+rm -f conftest*
fi
+if eval "test \"`echo '$ac_cv_func_'accept`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ gcj_checkNsl=0
+ gcj_cv_lib_sockets="-lsocket -lnsl"
else
- GCJ="no"
-fi
+ echo "$ac_t""no" 1>&6
fi
-
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-
-
-
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| { echo "configure: error: libtool tag configuration failed" 1>&2; exit 1; }
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-
-
-
-
-CPPFLAGS=$GCJ_SAVE_CPPFLAGS
-
-echo $ac_n "checking size of void *""... $ac_c" 1>&6
-echo "configure:5484: checking size of void *" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
+
+ unset ac_cv_func_accept
+ LIBS=$gcj_oldLibs
+ fi
+ unset ac_cv_func_gethostbyname
+ gcj_oldLibs=$LIBS
+ LIBS="$LIBS $gcj_cv_lib_sockets"
+ echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
+echo "configure:6331: checking for gethostbyname" >&5
+if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 5490 "configure"
+#line 6336 "configure"
#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
-
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char gethostbyname(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname();
int main() {
-switch (0) case 0: case (sizeof (void *) == $ac_size):;
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
+choke me
+#else
+gethostbyname();
+#endif
+
; return 0; }
EOF
-if { (eval echo configure:5500: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- ac_cv_sizeof_void_p=$ac_size
+ eval "ac_cv_func_gethostbyname=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_gethostbyname=no"
fi
rm -f conftest*
- if test x$ac_cv_sizeof_void_p != x ; then break; fi
-done
-
-fi
-
-if test x$ac_cv_sizeof_void_p = x ; then
- { echo "configure: error: cannot determine a size for void *" 1>&2; exit 1; }
fi
-echo "$ac_t""$ac_cv_sizeof_void_p" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
-EOF
-
-
-ZLIBS=
-ZDEPS=
-ZINCS=
-if test "x$ZLIBSPEC" = "x-lzgcj"; then
- # We include the path to the zlib build directory.
- # See Makefile.am to understand why.
- ZDEPS='$(top_builddir)/../zlib/libzgcj.la'
- ZLIBS="$ZDEPS -L\$(here)/../zlib/$libsubdir"
- ZINCS='-I$(top_srcdir)/../zlib'
+if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ :
else
- ZLIBS="$ZLIBSPEC"
-fi
-
-
-
-
-
-
-
-
-if test "$CANADIAN" = yes; then
- CANADIAN_TRUE=
- CANADIAN_FALSE='#'
+ echo "$ac_t""no" 1>&6
+echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
+echo "configure:6377: checking for main in -lnsl" >&5
+ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- CANADIAN_TRUE='#'
- CANADIAN_FALSE=
-fi
-
+ ac_save_LIBS="$LIBS"
+LIBS="-lnsl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 6385 "configure"
+#include "confdefs.h"
-if test "$NULL_TARGET" = yes; then
- NULL_TARGET_TRUE=
- NULL_TARGET_FALSE='#'
+int main() {
+main()
+; return 0; }
+EOF
+if { (eval echo configure:6392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
else
- NULL_TARGET_TRUE='#'
- NULL_TARGET_FALSE=
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
-
-if test "$NATIVE" = yes || test "$NULL_TARGET" = yes; then
- NATIVE_TRUE=
- NATIVE_FALSE='#'
-else
- NATIVE_TRUE='#'
- NATIVE_FALSE=
fi
-
-
-if test -z "$with_cross_host"; then
- USE_LIBDIR_TRUE=
- USE_LIBDIR_FALSE='#'
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ gcj_cv_lib_sockets="$gcj_cv_lib_sockets -lnsl"
else
- USE_LIBDIR_TRUE='#'
- USE_LIBDIR_FALSE=
+ echo "$ac_t""no" 1>&6
fi
-
-if test "$NEEDS_DATA_START" = yes && test "$NATIVE" = yes; then
- NEEDS_DATA_START_TRUE=
- NEEDS_DATA_START_FALSE='#'
-else
- NEEDS_DATA_START_TRUE='#'
- NEEDS_DATA_START_FALSE=
fi
+ unset ac_cv_func_gethostbyname
+ LIBS=$gcj_oldLIBS
+
+fi
-# Determine gcj version number.
-
-gcjvers="`$GCJ -v 2>&1 | sed -n 's/^.*version \([^ ]*\).*$/\1/p'`"
-
-cat >> confdefs.h <<EOF
-#define GCJVERSION "$gcjvers"
-EOF
-
-
-
-
+echo "$ac_t""$gcj_cv_lib_sockets" 1>&6
+ SYSTEMSPEC="$SYSTEMSPEC $gcj_cv_lib_sockets"
-echo $ac_n "checking for g++ -ffloat-store bug""... $ac_c" 1>&6
-echo "configure:5601: checking for g++ -ffloat-store bug" >&5
-save_CFLAGS="$CFLAGS"
-CFLAGS="-x c++ -O2 -ffloat-store"
+ if test "$with_system_zlib" = yes; then
+ echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6
+echo "configure:6424: checking for deflate in -lz" >&5
+ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lz $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5605 "configure"
+#line 6432 "configure"
#include "confdefs.h"
-#include <math.h>
-int main() {
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char deflate();
+int main() {
+deflate()
; return 0; }
EOF
-if { (eval echo configure:5612: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6443: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- echo "$ac_t""no" 1>&6
+ eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- cat >> confdefs.h <<\EOF
-#define __NO_MATH_INLINES 1
-EOF
-
- echo "$ac_t""yes" 1>&6
+ eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
-CFLAGS="$save_CFLAGS"
+LIBS="$ac_save_LIBS"
-for ac_hdr in unistd.h bstring.h sys/time.h sys/types.h fcntl.h sys/ioctl.h sys/filio.h sys/stat.h sys/select.h sys/socket.h netinet/in.h arpa/inet.h netdb.h pwd.h sys/config.h stdint.h langinfo.h locale.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5632: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ZLIBSPEC=-lz
else
- cat > conftest.$ac_ext <<EOF
-#line 5637 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5642: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
+ echo "$ac_t""no" 1>&6
+ZLIBSPEC=
+fi
+
+ fi
+
+ # Test for Gtk stuff, if asked for.
+ if test "$use_gtk_awt" = yes; then
+ # Check whether --enable-gtktest or --disable-gtktest was given.
+if test "${enable_gtktest+set}" = set; then
+ enableval="$enable_gtktest"
+ :
else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+ enable_gtktest=yes
fi
-rm -f conftest*
+
+
+ pkg_config_args=gtk+-2.0
+ for module in .
+ do
+ case "$module" in
+ gthread)
+ pkg_config_args="$pkg_config_args gthread-2.0"
+ ;;
+ esac
+ done
+
+ no_gtk=""
+
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6492: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$PKG_CONFIG" in
+ /*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
+ ;;
+esac
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
+PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+if test -n "$PKG_CONFIG"; then
+ echo "$ac_t""$PKG_CONFIG" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-done
-for ac_hdr in dirent.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5672: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+
+ if test x$PKG_CONFIG != xno ; then
+ if pkg-config --atleast-pkgconfig-version 0.7 ; then
+ :
+ else
+ echo *** pkg-config too old; version 0.7 or better required.
+ no_gtk=yes
+ PKG_CONFIG=no
+ fi
+ else
+ no_gtk=yes
+ fi
+
+ min_gtk_version=2.0.0
+ echo $ac_n "checking for GTK+ - version >= $min_gtk_version""... $ac_c" 1>&6
+echo "configure:6540: checking for GTK+ - version >= $min_gtk_version" >&5
+
+ if test x$PKG_CONFIG != xno ; then
+ ## don't try to run the test against uninstalled libtool libs
+ if $PKG_CONFIG --uninstalled $pkg_config_args; then
+ echo "Will use uninstalled version of GTK+ found in PKG_CONFIG_PATH"
+ enable_gtktest=no
+ fi
+
+ if $PKG_CONFIG --atleast-version $min_gtk_version $pkg_config_args; then
+ :
+ else
+ no_gtk=yes
+ fi
+ fi
+
+ if test x"$no_gtk" = x ; then
+ GTK_CFLAGS=`$PKG_CONFIG $pkg_config_args --cflags`
+ GTK_LIBS=`$PKG_CONFIG $pkg_config_args --libs`
+ gtk_config_major_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
+ gtk_config_minor_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
+ gtk_config_micro_version=`$PKG_CONFIG --modversion gtk+-2.0 | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
+ if test "x$enable_gtktest" = "xyes" ; then
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$GTK_LIBS $LIBS"
+ rm -f conf.gtktest
+ if test "$cross_compiling" = yes; then
+ echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 5677 "configure"
+#line 6575 "configure"
#include "confdefs.h"
-#include <$ac_hdr>
+
+#include <gtk/gtk.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main ()
+{
+ int major, minor, micro;
+ char *tmp_version;
+
+ system ("touch conf.gtktest");
+
+ /* HP/UX 9 (%@#!) writes to sscanf strings */
+ tmp_version = g_strdup("$min_gtk_version");
+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_gtk_version");
+ exit(1);
+ }
+
+ if ((gtk_major_version != $gtk_config_major_version) ||
+ (gtk_minor_version != $gtk_config_minor_version) ||
+ (gtk_micro_version != $gtk_config_micro_version))
+ {
+ printf("\n*** 'pkg-config --modversion gtk+-2.0' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
+ $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ printf ("*** was found! If pkg-config was correct, then it is best\n");
+ printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
+ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+ printf("*** required on your system.\n");
+ printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
+ printf("*** to point to the correct configuration files\n");
+ }
+ else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
+ (gtk_minor_version != GTK_MINOR_VERSION) ||
+ (gtk_micro_version != GTK_MICRO_VERSION))
+ {
+ printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
+ GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
+ printf("*** library (version %d.%d.%d)\n",
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ }
+ else
+ {
+ if ((gtk_major_version > major) ||
+ ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
+ ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
+ {
+ return 0;
+ }
+ else
+ {
+ printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
+ gtk_major_version, gtk_minor_version, gtk_micro_version);
+ printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
+ major, minor, micro);
+ printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
+ printf("***\n");
+ printf("*** If you have already installed a sufficiently new version, this error\n");
+ printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
+ printf("*** being found. The easiest way to fix this is to remove the old version\n");
+ printf("*** of GTK+, but you can also set the PKG_CONFIG environment to point to the\n");
+ printf("*** correct copy of pkg-config. (In this case, you will have to\n");
+ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+ printf("*** so that the correct libraries are found at run-time))\n");
+ }
+ }
+ return 1;
+}
+
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5682: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
+if { (eval echo configure:6650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
+ rm -fr conftest*
+ no_gtk=yes
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
+rm -fr conftest*
fi
-done
-for ac_hdr in inttypes.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5712: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5717 "configure"
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ if test "x$no_gtk" = x ; then
+ echo "$ac_t""yes (version $gtk_config_major_version.$gtk_config_minor_version.$gtk_config_micro_version)" 1>&6
+ :
+ else
+ echo "$ac_t""no" 1>&6
+ if test "$PKG_CONFIG" = "no" ; then
+ echo "*** A new enough version of pkg-config was not found."
+ echo "*** See http://pkgconfig.sourceforge.net"
+ else
+ if test -f conf.gtktest ; then
+ :
+ else
+ echo "*** Could not run GTK+ test program, checking why..."
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GTK_CFLAGS"
+ LIBS="$LIBS $GTK_LIBS"
+ cat > conftest.$ac_ext <<EOF
+#line 6684 "configure"
#include "confdefs.h"
-#include <$ac_hdr>
+
+#include <gtk/gtk.h>
+#include <stdio.h>
+
+int main() {
+ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version));
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5722: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
+if { (eval echo configure:6694: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
+ echo "*** The test program compiled, but did not run. This usually means"
+ echo "*** that the run-time linker is not finding GTK+ or finding the wrong"
+ echo "*** version of GTK+. If it is not finding GTK+, you'll need to set your"
+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
+ echo "*** is required on your system"
+ echo "***"
+ echo "*** If you have an old version installed, it is best to remove it, although"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+ echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** exact error that occured. This usually means GTK+ is incorrectly installed."
fi
rm -f conftest*
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ GTK_CFLAGS=""
+ GTK_LIBS=""
+ exit 1
+ fi
+
+
+ rm -f conf.gtktest
+
+ # Check whether --enable-glibtest or --disable-glibtest was given.
+if test "${enable_glibtest+set}" = set; then
+ enableval="$enable_glibtest"
+ :
+else
+ enable_glibtest=yes
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
- cat >> confdefs.h <<\EOF
-#define HAVE_INTTYPES_H 1
-EOF
- cat >> confdefs.h <<\EOF
-#define JV_HAVE_INTTYPES_H 1
-EOF
+ pkg_config_args=glib-2.0
+ for module in . gthread
+ do
+ case "$module" in
+ gmodule)
+ pkg_config_args="$pkg_config_args gmodule-2.0"
+ ;;
+ gobject)
+ pkg_config_args="$pkg_config_args gobject-2.0"
+ ;;
+ gthread)
+ pkg_config_args="$pkg_config_args gthread-2.0"
+ ;;
+ esac
+ done
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6753: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$PKG_CONFIG" in
+ /*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="no"
+ ;;
+esac
+fi
+PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+if test -n "$PKG_CONFIG"; then
+ echo "$ac_t""$PKG_CONFIG" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-done
-echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:5758: checking for sys/wait.h that is POSIX.1 compatible" >&5
-if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+
+ no_glib=""
+
+ if test x$PKG_CONFIG != xno ; then
+ if $PKG_CONFIG --atleast-pkgconfig-version 0.7 ; then
+ :
+ else
+ echo *** pkg-config too old; version 0.7 or better required.
+ no_glib=yes
+ PKG_CONFIG=no
+ fi
+ else
+ no_glib=yes
+ fi
+
+ min_glib_version=2.0.0
+ echo $ac_n "checking for GLIB - version >= $min_glib_version""... $ac_c" 1>&6
+echo "configure:6803: checking for GLIB - version >= $min_glib_version" >&5
+
+ if test x$PKG_CONFIG != xno ; then
+ ## don't try to run the test against uninstalled libtool libs
+ if $PKG_CONFIG --uninstalled $pkg_config_args; then
+ echo "Will use uninstalled version of GLib found in PKG_CONFIG_PATH"
+ enable_glibtest=no
+ fi
+
+ if $PKG_CONFIG --atleast-version $min_glib_version $pkg_config_args; then
+ :
+ else
+ no_glib=yes
+ fi
+ fi
+
+ if test x"$no_glib" = x ; then
+ GLIB_GENMARSHAL=`$PKG_CONFIG --variable=glib_genmarshal glib-2.0`
+ GOBJECT_QUERY=`$PKG_CONFIG --variable=gobject_query glib-2.0`
+ GLIB_MKENUMS=`$PKG_CONFIG --variable=glib_mkenums glib-2.0`
+
+ GLIB_CFLAGS=`$PKG_CONFIG --cflags $pkg_config_args`
+ GLIB_LIBS=`$PKG_CONFIG --libs $pkg_config_args`
+ glib_config_major_version=`$PKG_CONFIG --modversion glib-2.0 | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
+ glib_config_minor_version=`$PKG_CONFIG --modversion glib-2.0 | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
+ glib_config_micro_version=`$PKG_CONFIG --modversion glib-2.0 | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
+ if test "x$enable_glibtest" = "xyes" ; then
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GLIB_CFLAGS"
+ LIBS="$GLIB_LIBS $LIBS"
+ rm -f conf.glibtest
+ if test "$cross_compiling" = yes; then
+ echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 5763 "configure"
+#line 6842 "configure"
#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/wait.h>
-#ifndef WEXITSTATUS
-#define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
-#endif
-#ifndef WIFEXITED
-#define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
-#endif
-int main() {
-int s;
-wait (&s);
-s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
-; return 0; }
+
+#include <glib.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+int
+main ()
+{
+ int major, minor, micro;
+ char *tmp_version;
+
+ system ("touch conf.glibtest");
+
+ /* HP/UX 9 (%@#!) writes to sscanf strings */
+ tmp_version = g_strdup("$min_glib_version");
+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_glib_version");
+ exit(1);
+ }
+
+ if ((glib_major_version != $glib_config_major_version) ||
+ (glib_minor_version != $glib_config_minor_version) ||
+ (glib_micro_version != $glib_config_micro_version))
+ {
+ printf("\n*** 'pkg-config --modversion glib-2.0' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
+ $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
+ glib_major_version, glib_minor_version, glib_micro_version);
+ printf ("*** was found! If pkg-config was correct, then it is best\n");
+ printf ("*** to remove the old version of GLib. You may also be able to fix the error\n");
+ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
+ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
+ printf("*** required on your system.\n");
+ printf("*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH\n");
+ printf("*** to point to the correct configuration files\n");
+ }
+ else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
+ (glib_minor_version != GLIB_MINOR_VERSION) ||
+ (glib_micro_version != GLIB_MICRO_VERSION))
+ {
+ printf("*** GLIB header files (version %d.%d.%d) do not match\n",
+ GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
+ printf("*** library (version %d.%d.%d)\n",
+ glib_major_version, glib_minor_version, glib_micro_version);
+ }
+ else
+ {
+ if ((glib_major_version > major) ||
+ ((glib_major_version == major) && (glib_minor_version > minor)) ||
+ ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
+ {
+ return 0;
+ }
+ else
+ {
+ printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
+ glib_major_version, glib_minor_version, glib_micro_version);
+ printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
+ major, minor, micro);
+ printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
+ printf("***\n");
+ printf("*** If you have already installed a sufficiently new version, this error\n");
+ printf("*** probably means that the wrong copy of the pkg-config shell script is\n");
+ printf("*** being found. The easiest way to fix this is to remove the old version\n");
+ printf("*** of GLIB, but you can also set the PKG_CONFIG environment to point to the\n");
+ printf("*** correct copy of pkg-config. (In this case, you will have to\n");
+ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
+ printf("*** so that the correct libraries are found at run-time))\n");
+ }
+ }
+ return 1;
+}
+
EOF
-if { (eval echo configure:5779: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_header_sys_wait_h=yes
+if { (eval echo configure:6917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_sys_wait_h=no
+ rm -fr conftest*
+ no_glib=yes
fi
-rm -f conftest*
+rm -fr conftest*
fi
-echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6
-if test $ac_cv_header_sys_wait_h = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_WAIT_H 1
-EOF
-
-fi
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ if test "x$no_glib" = x ; then
+ echo "$ac_t""yes (version $glib_config_major_version.$glib_config_minor_version.$glib_config_micro_version)" 1>&6
+ :
+ else
+ echo "$ac_t""no" 1>&6
+ if test "$PKG_CONFIG" = "no" ; then
+ echo "*** A new enough version of pkg-config was not found."
+ echo "*** See http://www.freedesktop.org/software/pkgconfig/"
+ else
+ if test -f conf.glibtest ; then
+ :
+ else
+ echo "*** Could not run GLIB test program, checking why..."
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $GLIB_CFLAGS"
+ LIBS="$LIBS $GLIB_LIBS"
+ cat > conftest.$ac_ext <<EOF
+#line 6951 "configure"
+#include "confdefs.h"
+#include <glib.h>
+#include <stdio.h>
-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:5801: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5806 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
+int main() {
+ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version));
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5814: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
+if { (eval echo configure:6961: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- ac_cv_header_stdc=yes
+ echo "*** The test program compiled, but did not run. This usually means"
+ echo "*** that the run-time linker is not finding GLIB or finding the wrong"
+ echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
+ echo "*** is required on your system"
+ echo "***"
+ echo "*** If you have an old version installed, it is best to remove it, although"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- ac_cv_header_stdc=no
+ echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** exact error that occured. This usually means GLIB is incorrectly installed."
fi
rm -f conftest*
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ GLIB_CFLAGS=""
+ GLIB_LIBS=""
+ GLIB_GENMARSHAL=""
+ GOBJECT_QUERY=""
+ GLIB_MKENUMS=""
+ exit 1
+ fi
+
+
+
+
+
+ rm -f conf.glibtest
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 5831 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "memchr" >/dev/null 2>&1; then
- :
+ enable_libarttest=no
+ # Check whether --with-libart-prefix or --without-libart-prefix was given.
+if test "${with_libart_prefix+set}" = set; then
+ withval="$with_libart_prefix"
+ libart_prefix="$withval"
else
- rm -rf conftest*
- ac_cv_header_stdc=no
+ libart_prefix=""
fi
-rm -f conftest*
+# Check whether --with-libart-exec-prefix or --without-libart-exec-prefix was given.
+if test "${with_libart_exec_prefix+set}" = set; then
+ withval="$with_libart_exec_prefix"
+ libart_exec_prefix="$withval"
+else
+ libart_exec_prefix=""
fi
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 5849 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "free" >/dev/null 2>&1; then
+# Check whether --enable-libarttest or --disable-libarttest was given.
+if test "${enable_libarttest+set}" = set; then
+ enableval="$enable_libarttest"
:
else
- rm -rf conftest*
- ac_cv_header_stdc=no
+ enable_libarttest=yes
+fi
+
+
+ if test x$libart_exec_prefix != x ; then
+ libart_args="$libart_args --exec-prefix=$libart_exec_prefix"
+ if test x${LIBART_CONFIG+set} != xset ; then
+ LIBART_CONFIG=$libart_exec_prefix/bin/libart-config
+ fi
+ fi
+ if test x$libart_prefix != x ; then
+ libart_args="$libart_args --prefix=$libart_prefix"
+ if test x${LIBART_CONFIG+set} != xset ; then
+ LIBART_CONFIG=$libart_prefix/bin/libart-config
+ fi
+ fi
+
+ # Extract the first word of "libart2-config", so it can be a program name with args.
+set dummy libart2-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:7040: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_LIBART_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$LIBART_CONFIG" in
+ /*)
+ ac_cv_path_LIBART_CONFIG="$LIBART_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_LIBART_CONFIG="$LIBART_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_LIBART_CONFIG="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_LIBART_CONFIG" && ac_cv_path_LIBART_CONFIG="no"
+ ;;
+esac
+fi
+LIBART_CONFIG="$ac_cv_path_LIBART_CONFIG"
+if test -n "$LIBART_CONFIG"; then
+ echo "$ac_t""$LIBART_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test "$LIBART_CONFIG" = "no" ; then
+ # Extract the first word of "libart-config", so it can be a program name with args.
+set dummy libart-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:7077: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_LIBART_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$LIBART_CONFIG" in
+ /*)
+ ac_cv_path_LIBART_CONFIG="$LIBART_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_LIBART_CONFIG="$LIBART_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_LIBART_CONFIG="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_LIBART_CONFIG" && ac_cv_path_LIBART_CONFIG="no"
+ ;;
+esac
fi
-rm -f conftest*
-
+LIBART_CONFIG="$ac_cv_path_LIBART_CONFIG"
+if test -n "$LIBART_CONFIG"; then
+ echo "$ac_t""$LIBART_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
fi
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
- :
+ fi
+ min_libart_version=2.1.0
+ echo $ac_n "checking for LIBART - version >= $min_libart_version""... $ac_c" 1>&6
+echo "configure:7113: checking for LIBART - version >= $min_libart_version" >&5
+ no_libart=""
+ if test "$LIBART_CONFIG" = "no" ; then
+ no_libart=yes
+ else
+ LIBART_CFLAGS=`$LIBART_CONFIG $libartconf_args --cflags`
+ LIBART_LIBS=`$LIBART_CONFIG $libartconf_args --libs`
+
+ libart_major_version=`$LIBART_CONFIG $libart_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'`
+ libart_minor_version=`$LIBART_CONFIG $libart_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'`
+ libart_micro_version=`$LIBART_CONFIG $libart_config_args --version | \
+ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
+ if test "x$enable_libarttest" = "xyes" ; then
+ ac_save_CFLAGS="$CFLAGS"
+ ac_save_LIBS="$LIBS"
+ CFLAGS="$CFLAGS $LIBART_CFLAGS"
+ LIBS="$LIBS $LIBART_LIBS"
+ rm -f conf.libarttest
+ if test "$cross_compiling" = yes; then
+ echo $ac_n "cross compiling; assumed OK... $ac_c"
else
cat > conftest.$ac_ext <<EOF
-#line 5870 "configure"
+#line 7137 "configure"
#include "confdefs.h"
-#include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <libart_lgpl/libart.h>
+
+char*
+my_strdup (char *str)
+{
+ char *new_str;
+
+ if (str)
+ {
+ new_str = malloc ((strlen (str) + 1) * sizeof(char));
+ strcpy (new_str, str);
+ }
+ else
+ new_str = NULL;
+
+ return new_str;
+}
+
+int main ()
+{
+ int major, minor, micro;
+ char *tmp_version;
+
+ system ("touch conf.libarttest");
+
+ /* HP/UX 9 (%@#!) writes to sscanf strings */
+ tmp_version = my_strdup("$min_libart_version");
+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
+ printf("%s, bad version string\n", "$min_libart_version");
+ exit(1);
+ }
+
+ if (($libart_major_version > major) ||
+ (($libart_major_version == major) && ($libart_minor_version > minor)) ||
+ (($libart_major_version == major) && ($libart_minor_version == minor) && ($libart_micro_version >= micro)))
+ {
+ return 0;
+ }
+ else
+ {
+ printf("\n*** 'libart-config --version' returned %d.%d.%d, but the minimum version\n", $libart_major_version, $libart_minor_version, $libart_micro_version);
+ printf("*** of LIBART required is %d.%d.%d. If libart-config is correct, then it is\n", major, minor, micro);
+ printf("*** best to upgrade to the required version.\n");
+ printf("*** If libart-config was wrong, set the environment variable LIBART_CONFIG\n");
+ printf("*** to point to the correct copy of libart-config, and remove the file\n");
+ printf("*** config.cache before re-running configure\n");
+ return 1;
+ }
+}
+
EOF
-if { (eval echo configure:5881: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
- ac_cv_header_stdc=no
+ no_libart=yes
fi
rm -fr conftest*
fi
-fi
-fi
-
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
-if test $ac_cv_header_stdc = yes; then
- cat >> confdefs.h <<\EOF
-#define STDC_HEADERS 1
-EOF
-
-fi
-
-echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:5905: checking for ssize_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5910 "configure"
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ if test "x$no_libart" = x ; then
+ echo "$ac_t""yes" 1>&6
+ :
+ else
+ echo "$ac_t""no" 1>&6
+ if test "$LIBART_CONFIG" = "no" ; then
+ echo "*** The libart-config script installed by LIBART could not be found"
+ echo "*** If LIBART was installed in PREFIX, make sure PREFIX/bin is in"
+ echo "*** your path, or set the LIBART_CONFIG environment variable to the"
+ echo "*** full path to libart-config."
+ else
+ if test -f conf.libarttest ; then
+ :
+ else
+ echo "*** Could not run LIBART test program, checking why..."
+ CFLAGS="$CFLAGS $LIBART_CFLAGS"
+ LIBS="$LIBS $LIBART_LIBS"
+ cat > conftest.$ac_ext <<EOF
+#line 7229 "configure"
#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "(^|[^a-zA-Z_0-9])ssize_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
- rm -rf conftest*
- ac_cv_type_ssize_t=yes
-else
- rm -rf conftest*
- ac_cv_type_ssize_t=no
-fi
-rm -f conftest*
-
-fi
-echo "$ac_t""$ac_cv_type_ssize_t" 1>&6
-if test $ac_cv_type_ssize_t = no; then
- cat >> confdefs.h <<\EOF
-#define ssize_t int
-EOF
-
-fi
+#include <stdio.h>
+#include <libart_lgpl/libart.h>
-echo $ac_n "checking for in_addr_t""... $ac_c" 1>&6
-echo "configure:5939: checking for in_addr_t" >&5
-cat > conftest.$ac_ext <<EOF
-#line 5941 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-#if HAVE_NETINET_IN_H
-#include <netinet/in.h>
-#endif
int main() {
-in_addr_t foo;
+ return 0;
; return 0; }
EOF
-if { (eval echo configure:5955: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- cat >> confdefs.h <<\EOF
-#define HAVE_IN_ADDR_T 1
-EOF
-
- echo "$ac_t""yes" 1>&6
+ echo "*** The test program compiled, but did not run. This usually means"
+ echo "*** that the run-time linker is not finding LIBART or finding the wrong"
+ echo "*** version of LIBART. If it is not finding LIBART, you'll need to set your"
+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+ echo "*** to the installed location Also, make sure you have run ldconfig if that"
+ echo "*** is required on your system"
+ echo "***"
+ echo "*** If you have an old version installed, it is best to remove it, although"
+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- echo "$ac_t""no" 1>&6
+ echo "*** The test program failed to compile or link. See the file config.log for the"
+ echo "*** exact error that occured. This usually means LIBART was incorrectly installed"
+ echo "*** or that you have moved LIBART since it was installed. In the latter case, you"
+ echo "*** may want to edit the libart-config script: $LIBART_CONFIG"
fi
rm -f conftest*
+ CFLAGS="$ac_save_CFLAGS"
+ LIBS="$ac_save_LIBS"
+ fi
+ fi
+ LIBART_CFLAGS=""
+ LIBART_LIBS=""
+ exit 1
+ fi
+
+
+ rm -f conf.libarttest
-echo $ac_n "checking whether struct ip_mreq is in netinet/in.h""... $ac_c" 1>&6
-echo "configure:5971: checking whether struct ip_mreq is in netinet/in.h" >&5
+ fi
+
+ # On Solaris, and maybe other architectures, the Boehm collector
+ # requires -ldl.
+ if test "$GC" = boehm; then
+ echo $ac_n "checking for main in -ldl""... $ac_c" 1>&6
+echo "configure:7278: checking for main in -ldl" >&5
+ac_lib_var=`echo dl'_'main | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5973 "configure"
+#line 7286 "configure"
#include "confdefs.h"
-#include <netinet/in.h>
+
int main() {
-struct ip_mreq mreq;
+main()
; return 0; }
EOF
-if { (eval echo configure:5980: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7293: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- cat >> confdefs.h <<\EOF
-#define HAVE_STRUCT_IP_MREQ 1
-EOF
-
- echo "$ac_t""yes" 1>&6
+ eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- echo "$ac_t""no" 1>&6
+ eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
+LIBS="$ac_save_LIBS"
-echo $ac_n "checking whether struct ipv6_mreq is in netinet/in.h""... $ac_c" 1>&6
-echo "configure:5996: checking whether struct ipv6_mreq is in netinet/in.h" >&5
-cat > conftest.$ac_ext <<EOF
-#line 5998 "configure"
-#include "confdefs.h"
-#include <netinet/in.h>
-int main() {
-struct ipv6_mreq mreq6;
-; return 0; }
-EOF
-if { (eval echo configure:6005: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- cat >> confdefs.h <<\EOF
-#define HAVE_STRUCT_IPV6_MREQ 1
-EOF
-
- echo "$ac_t""yes" 1>&6
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SYSTEMSPEC="$SYSTEMSPEC -ldl"
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
-rm -f conftest*
-echo $ac_n "checking whether struct sockaddr_in6 is in netinet/in.h""... $ac_c" 1>&6
-echo "configure:6021: checking whether struct sockaddr_in6 is in netinet/in.h" >&5
-cat > conftest.$ac_ext <<EOF
-#line 6023 "configure"
-#include "confdefs.h"
-#include <netinet/in.h>
-int main() {
-struct sockaddr_in6 addr6;
-; return 0; }
-EOF
-if { (eval echo configure:6030: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- cat >> confdefs.h <<\EOF
-#define HAVE_INET6 1
-EOF
+ fi
+fi
- echo "$ac_t""yes" 1>&6
+if test -z "${with_multisubdir}"; then
+ builddotdot=.
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
+
+ builddotdot=`echo ${with_multisubdir} | sed -e 's:[^/][^/]*:..:g'`
+
fi
-rm -f conftest*
-echo $ac_n "checking for socklen_t in sys/socket.h""... $ac_c" 1>&6
-echo "configure:6046: checking for socklen_t in sys/socket.h" >&5
-cat > conftest.$ac_ext <<EOF
-#line 6048 "configure"
-#include "confdefs.h"
-#define _POSIX_PII_SOCKET
-#include <sys/types.h>
-#include <sys/socket.h>
-int main() {
-socklen_t x = 5;
-; return 0; }
-EOF
-if { (eval echo configure:6057: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- cat >> confdefs.h <<\EOF
-#define HAVE_SOCKLEN_T 1
-EOF
+# Which gcj do we use?
+which_gcj=default
+built_gcc_dir="`cd ${builddotdot}/../../gcc && ${PWDCMD-pwd}`"
+if test -n "${with_cross_host}"; then
+ # We are being configured with a cross compiler. We can't
+ # use ac_exeext, because that is for the target platform.
+ NATIVE=no
+ cross_host_exeext=
+ case "${with_cross_host}" in
+ *mingw* | *cygwin*)
+ cross_host_exeext=.exe
+ ;;
+ esac
+ if test -x "${built_gcc_dir}/gcj${cross_host_exeext}"; then
+ if test x"$build_alias" = x"$with_cross_host"; then
+ # Ordinary cross (host!=target and host=build)
+ which_gcj=built
+ else
+ # Canadian cross (host!=target and host!=build)
+ which_gcj=cross
+ fi
+ else
+ which_gcj=cross
+ fi
+else
+ # We are being configured with a native or crossed-native compiler
+ if test -x "${built_gcc_dir}/gcj${ac_exeext}"; then
+ if test x"$build" = x"$host"; then
+ # True native build (host=target and host=build)
+ which_gcj=built
+ else
+ # Crossed-native build (host=target and host!=build)
+ which_gcj=cross
+ fi
+ else
+ which_gcj=path
+ fi
+fi
+case "${which_gcj}" in
+ built)
+ GCJ="$built_gcc_dir/gcj -B`${PWDCMD-pwd}`/ -B$built_gcc_dir/"
+ ;;
+ cross)
+ # See the comment in Makefile.am about CANADIAN being a misnomer
+ CANADIAN=yes
+ NULL_TARGET=no
+ if test "x${with_newlib}" = "xyes"; then
+ # FIXME (comment): Why is this needed?
+ GCC_UNWIND_INCLUDE=
+ GCJ="${target_alias}-gcj"
+ else
+ GCJ="${target_alias}-gcj -B`${PWDCMD-pwd}`/"
+ fi
+ ;;
+ path)
+ # See the comment in Makefile.am about CANADIAN being a misnomer
+ CANADIAN=yes
+ NULL_TARGET=yes
+ GCJ="gcj -B`${PWDCMD-pwd}`/"
+ ;;
+esac
- echo "$ac_t""yes" 1>&6
+# Create it, so that compile/link tests don't fail
+test -f libgcj.spec || touch libgcj.spec
+
+# We must search the source tree for java.lang, since we still don't
+# have libgcj.jar nor java/lang/*.class
+GCJ_SAVE_CPPFLAGS=$CPPFLAGS
+CPPFLAGS="$CPPFLAGS -I`${PWDCMD-pwd}` -I`cd $srcdir && ${PWDCMD-pwd}`"
+
+# Since some classes depend on this one, we need its source available
+# before we can do any GCJ compilation test :-(
+if test ! -f gnu/classpath/Configuration.java; then
+ test -d gnu || mkdir gnu
+ test -d gnu/classpath || mkdir gnu/classpath
+ sed -e 's,@LIBGCJDEBUG@,$LIBGCJDEBUG,' \
+ -e 's,@TOOLKIT@,$TOOLKIT,' \
+ < $srcdir/gnu/classpath/Configuration.java.in \
+ > gnu/classpath/Configuration.java
+ # We do not want to redirect the output of the grep below to /dev/null,
+ # but we add /dev/null to the input list so that grep will print the
+ # filename of Configuration.java in case it finds any matches.
+ if grep @ gnu/classpath/Configuration.java /dev/null; then
+ { echo "configure: error: configure.in is missing the substitutions above" 1>&2; exit 1; }
+ fi
+fi
+
+# Extract the first word of "${ac_tool_prefix}gcj", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcj; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:7414: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GCJ"; then
+ ac_cv_prog_GCJ="$GCJ" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GCJ="${ac_tool_prefix}gcj"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+GCJ="$ac_cv_prog_GCJ"
+if test -n "$GCJ"; then
+ echo "$ac_t""$GCJ" 1>&6
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
-rm -f conftest*
-echo $ac_n "checking for tm_gmtoff in struct tm""... $ac_c" 1>&6
-echo "configure:6073: checking for tm_gmtoff in struct tm" >&5
-cat > conftest.$ac_ext <<EOF
-#line 6075 "configure"
-#include "confdefs.h"
-#include <time.h>
-int main() {
-struct tm tim; tim.tm_gmtoff = 0;
-; return 0; }
-EOF
-if { (eval echo configure:6082: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- cat >> confdefs.h <<\EOF
-#define STRUCT_TM_HAS_GMTOFF 1
-EOF
- echo "$ac_t""yes" 1>&6
+if test -z "$ac_cv_prog_GCJ"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "gcj", so it can be a program name with args.
+set dummy gcj; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:7446: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_GCJ'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$GCJ"; then
+ ac_cv_prog_GCJ="$GCJ" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_GCJ="gcj"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_GCJ" && ac_cv_prog_GCJ="no"
+fi
+fi
+GCJ="$ac_cv_prog_GCJ"
+if test -n "$GCJ"; then
+ echo "$ac_t""$GCJ" 1>&6
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
echo "$ac_t""no" 1>&6
- echo $ac_n "checking for global timezone variable""... $ac_c" 1>&6
-echo "configure:6095: checking for global timezone variable" >&5
- cat > conftest.$ac_ext <<EOF
-#line 6097 "configure"
-#include "confdefs.h"
-#include <time.h>
-int main() {
-long z2 = timezone;
-; return 0; }
-EOF
-if { (eval echo configure:6104: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- cat >> confdefs.h <<\EOF
-#define HAVE_TIMEZONE 1
-EOF
+fi
- echo "$ac_t""yes" 1>&6
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
+ GCJ="no"
fi
-rm -f conftest*
fi
-rm -f conftest*
-# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
-# for constant arguments. Useless!
-echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:6124: checking for working alloca.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+
+
+
+LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
+lt_save_CC="$CC"
+lt_save_CFLAGS="$CFLAGS"
+AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" \
+file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
+--build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
+|| { echo "configure: error: libtool tag configuration failed" 1>&2; exit 1; }
+CC="$lt_save_CC"
+CFLAGS="$lt_save_CFLAGS"
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+
+
+
+
+CPPFLAGS=$GCJ_SAVE_CPPFLAGS
+
+echo $ac_n "checking size of void *""... $ac_c" 1>&6
+echo "configure:7508: checking size of void *" >&5
+if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 6129 "configure"
+#line 7514 "configure"
#include "confdefs.h"
-#include <alloca.h>
+#include "confdefs.h"
+#include <sys/types.h>
+
+
int main() {
-char *p = alloca(2 * sizeof(int));
+switch (0) case 0: case (sizeof (void *) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:6136: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7524: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- ac_cv_header_alloca_h=yes
+ ac_cv_sizeof_void_p=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_alloca_h=no
fi
rm -f conftest*
+ if test x$ac_cv_sizeof_void_p != x ; then break; fi
+done
+
fi
-echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
-if test $ac_cv_header_alloca_h = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_ALLOCA_H 1
+if test x$ac_cv_sizeof_void_p = x ; then
+ { echo "configure: error: cannot determine a size for void *" 1>&2; exit 1; }
+fi
+echo "$ac_t""$ac_cv_sizeof_void_p" 1>&6
+cat >> confdefs.h <<EOF
+#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
EOF
+
+
+ZLIBS=
+SYS_ZLIBS=
+ZINCS=
+
+if test -z "$ZLIBSPEC"; then
+ # Use zlib from the GCC tree.
+ ZINCS='-I$(top_srcdir)/../zlib'
+ ZLIBS=../zlib/libzgcj_convenience.la
+else
+ # System's zlib.
+ SYS_ZLIBS="$ZLIBSPEC"
fi
-echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:6157: checking for alloca" >&5
-if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+
+
+
+
+
+
+
+
+
+if test "$CANADIAN" = yes; then
+ CANADIAN_TRUE=
+ CANADIAN_FALSE='#'
else
- cat > conftest.$ac_ext <<EOF
-#line 6162 "configure"
-#include "confdefs.h"
+ CANADIAN_TRUE='#'
+ CANADIAN_FALSE=
+fi
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-#else
-# ifdef _MSC_VER
-# include <malloc.h>
-# define alloca _alloca
-# else
-# if HAVE_ALLOCA_H
-# include <alloca.h>
-# else
-# ifdef _AIX
- #pragma alloca
-# else
-# ifndef alloca /* predefined by HP cc +Olibcalls */
-char *alloca ();
-# endif
-# endif
-# endif
-# endif
-#endif
-int main() {
-char *p = (char *) alloca(1);
-; return 0; }
-EOF
-if { (eval echo configure:6190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_func_alloca_works=yes
+if test "$NULL_TARGET" = yes; then
+ NULL_TARGET_TRUE=
+ NULL_TARGET_FALSE='#'
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_func_alloca_works=no
+ NULL_TARGET_TRUE='#'
+ NULL_TARGET_FALSE=
fi
-rm -f conftest*
+
+
+if test "$NATIVE" = yes || test "$NULL_TARGET" = yes; then
+ NATIVE_TRUE=
+ NATIVE_FALSE='#'
+else
+ NATIVE_TRUE='#'
+ NATIVE_FALSE=
+fi
+
+
+if test "$NEEDS_DATA_START" = yes && test "$NATIVE" = yes; then
+ NEEDS_DATA_START_TRUE=
+ NEEDS_DATA_START_FALSE='#'
+else
+ NEEDS_DATA_START_TRUE='#'
+ NEEDS_DATA_START_FALSE=
fi
-echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
-if test $ac_cv_func_alloca_works = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_ALLOCA 1
-EOF
+if test -n "$with_cross_host" &&
+ test x"$with_cross_host" != x"no"; then
+ toolexecdir='$(exec_prefix)/$(target_alias)'
+ toolexecmainlibdir='$(toolexecdir)/lib'
+else
+ toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+ toolexecmainlibdir='$(libdir)'
fi
+multi_os_directory=`$CC -print-multi-os-directory`
+case $multi_os_directory in
+ .) toolexeclibdir=$toolexecmainlibdir ;; # Avoid trailing /.
+ *) toolexeclibdir=$toolexecmainlibdir/$multi_os_directory ;;
+esac
-if test $ac_cv_func_alloca_works = no; then
- # The SVR3 libPW and SVR4 libucb both contain incompatible functions
- # that cause trouble. Some versions do not even contain alloca or
- # contain a buggy version. If you still want to use their alloca,
- # use ar to extract alloca.o from them instead of compiling alloca.c.
- ALLOCA=alloca.${ac_objext}
- cat >> confdefs.h <<\EOF
-#define C_ALLOCA 1
+
+
+
+# Determine gcj version number.
+
+gcjversion=`$GCJ -v 2>&1 | sed -n 's/^.*version \([^ ]*\).*$/\1/p'`
+
+GCJVERSION=$gcjversion
+
+cat >> confdefs.h <<EOF
+#define GCJVERSION "$GCJVERSION"
EOF
-echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:6222: checking whether alloca needs Cray hooks" >&5
-if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 6227 "configure"
+echo $ac_n "checking for g++ -ffloat-store bug""... $ac_c" 1>&6
+echo "configure:7634: checking for g++ -ffloat-store bug" >&5
+save_CFLAGS="$CFLAGS"
+CFLAGS="-x c++ -O2 -ffloat-store"
+cat > conftest.$ac_ext <<EOF
+#line 7638 "configure"
#include "confdefs.h"
-#if defined(CRAY) && ! defined(CRAY2)
-webecray
-#else
-wenotbecray
-#endif
+#include <math.h>
+int main() {
+; return 0; }
EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "webecray" >/dev/null 2>&1; then
+if { (eval echo configure:7645: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- ac_cv_os_cray=yes
+ echo "$ac_t""no" 1>&6
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
- ac_cv_os_cray=no
-fi
-rm -f conftest*
+ cat >> confdefs.h <<\EOF
+#define __NO_MATH_INLINES 1
+EOF
+ echo "$ac_t""yes" 1>&6
fi
+rm -f conftest*
+CFLAGS="$save_CFLAGS"
-echo "$ac_t""$ac_cv_os_cray" 1>&6
-if test $ac_cv_os_cray = yes; then
-for ac_func in _getb67 GETB67 getb67; do
- echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6252: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+for ac_hdr in unistd.h bstring.h sys/time.h sys/types.h fcntl.h sys/ioctl.h sys/filio.h sys/stat.h sys/select.h sys/socket.h netinet/in.h arpa/inet.h netdb.h net/if.h pwd.h sys/config.h stdint.h langinfo.h locale.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:7665: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6257 "configure"
+#line 7670 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
+#include <$ac_hdr>
EOF
-if { (eval echo configure:6280: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:7675: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
+ eval "ac_cv_header_$ac_safe=yes"
else
+ echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
+ eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
cat >> confdefs.h <<EOF
-#define CRAY_STACKSEG_END $ac_func
+#define $ac_tr_hdr 1
EOF
-
- break
+
else
echo "$ac_t""no" 1>&6
fi
-
done
-fi
-echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:6307: checking stack direction for C alloca" >&5
-if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
+for ac_hdr in dirent.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:7705: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$cross_compiling" = yes; then
- ac_cv_c_stack_direction=0
-else
cat > conftest.$ac_ext <<EOF
-#line 6315 "configure"
+#line 7710 "configure"
#include "confdefs.h"
-find_stack_direction ()
-{
- static char *addr = 0;
- auto char dummy;
- if (addr == 0)
- {
- addr = &dummy;
- return find_stack_direction ();
- }
- else
- return (&dummy > addr) ? 1 : -1;
-}
-main ()
-{
- exit (find_stack_direction() < 0);
-}
+#include <$ac_hdr>
EOF
-if { (eval echo configure:6334: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_c_stack_direction=1
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:7715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
else
+ echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_c_stack_direction=-1
-fi
-rm -fr conftest*
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
fi
-
+rm -f conftest*
fi
-
-echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
-cat >> confdefs.h <<EOF
-#define STACK_DIRECTION $ac_cv_c_stack_direction
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
EOF
-
+
+else
+ echo "$ac_t""no" 1>&6
fi
+done
-
-for ac_prog in perl
+for ac_hdr in inttypes.h
do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6361: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_PERL'+set}'`\" = set"; then
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:7745: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$PERL"; then
- ac_cv_prog_PERL="$PERL" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_PERL="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-PERL="$ac_cv_prog_PERL"
-if test -n "$PERL"; then
- echo "$ac_t""$PERL" 1>&6
+ cat > conftest.$ac_ext <<EOF
+#line 7750 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:7755: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
else
- echo "$ac_t""no" 1>&6
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
fi
-
-test -n "$PERL" && break
-done
-test -n "$PERL" || PERL="false"
-
-
-SYSDEP_SOURCES=
-
-case "${host}" in
- i?86-*-linux*)
- SIGNAL_HANDLER=include/i386-signal.h
- ;;
- sparc-sun-solaris*)
- SIGNAL_HANDLER=include/sparc-signal.h
- ;;
-# ia64-*)
-# SYSDEP_SOURCES=sysdep/ia64.c
-# test -d sysdep || mkdir sysdep
-# ;;
- powerpc-*-linux*)
- SIGNAL_HANDLER=include/dwarf2-signal.h
- ;;
- alpha*-*-linux*)
- SIGNAL_HANDLER=include/dwarf2-signal.h
- ;;
- *mingw*)
- SIGNAL_HANDLER=include/win32-signal.h
- ;;
- *)
- SIGNAL_HANDLER=include/default-signal.h
- ;;
-esac
-
-# If we're using sjlj exceptions, forget what we just learned.
-if test "$enable_sjlj_exceptions" = yes; then
- SIGNAL_HANDLER=include/default-signal.h
+rm -f conftest*
fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HAVE_INTTYPES_H 1
+EOF
+ cat >> confdefs.h <<\EOF
+#define JV_HAVE_INTTYPES_H 1
+EOF
-
-
-if test "${multilib}" = "yes"; then
- multilib_arg="--enable-multilib"
else
- multilib_arg=
-fi
-
-# If we find X, set shell vars x_includes and x_libraries to the
-# paths, otherwise set no_x=yes.
-# Uses ac_ vars as temps to allow command line to override cache and checks.
-# --without-x overrides everything else, but does not touch the cache.
-echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:6439: checking for X" >&5
-
-# Check whether --with-x or --without-x was given.
-if test "${with_x+set}" = set; then
- withval="$with_x"
- :
+ echo "$ac_t""no" 1>&6
fi
+done
-# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
-if test "x$with_x" = xno; then
- # The user explicitly disabled X.
- have_x=disabled
-else
- if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
- # Both variables are already set.
- have_x=yes
- else
-if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
+echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
+echo "configure:7791: checking for sys/wait.h that is POSIX.1 compatible" >&5
+if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- # One or both of the vars are not set, and there is no cached value.
-ac_x_includes=NO ac_x_libraries=NO
-rm -fr conftestdir
-if mkdir conftestdir; then
- cd conftestdir
- # Make sure to not put "make" in the Imakefile rules, since we grep it out.
- cat > Imakefile <<'EOF'
-acfindx:
- @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
+ cat > conftest.$ac_ext <<EOF
+#line 7796 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/wait.h>
+#ifndef WEXITSTATUS
+#define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
+#endif
+#ifndef WIFEXITED
+#define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
+#endif
+int main() {
+int s;
+wait (&s);
+s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
+; return 0; }
EOF
- if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
- eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
- # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
- for ac_extension in a so sl; do
- if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
- test -f $ac_im_libdir/libX11.$ac_extension; then
- ac_im_usrlibdir=$ac_im_libdir; break
- fi
- done
- # Screen out bogus values from the imake configuration. They are
- # bogus both because they are the default anyway, and because
- # using them would break gcc on systems where it needs fixed includes.
- case "$ac_im_incroot" in
- /usr/include) ;;
- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
- esac
- case "$ac_im_usrlibdir" in
- /usr/lib | /lib) ;;
- *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
- esac
- fi
- cd ..
- rm -fr conftestdir
+if { (eval echo configure:7812: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_header_sys_wait_h=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_sys_wait_h=no
+fi
+rm -f conftest*
fi
-if test "$ac_x_includes" = NO; then
- # Guess where to find include files, by looking for this one X11 .h file.
- test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
+echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6
+if test $ac_cv_header_sys_wait_h = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_WAIT_H 1
+EOF
- # First, try using that file with no special directory specified.
-cat > conftest.$ac_ext <<EOF
-#line 6501 "configure"
+fi
+
+
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:7834: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 7839 "configure"
#include "confdefs.h"
-#include <$x_direct_test_include>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6506: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7847: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
- # We can compile using X headers with no special include directory.
-ac_x_includes=
+ ac_cv_header_stdc=yes
else
echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- # Look for the header file in a standard set of common directories.
-# Check X11 before X11Rn because it is often a symlink to the current release.
- for ac_dir in \
- /usr/X11/include \
- /usr/X11R6/include \
- /usr/X11R5/include \
- /usr/X11R4/include \
- \
- /usr/include/X11 \
- /usr/include/X11R6 \
- /usr/include/X11R5 \
- /usr/include/X11R4 \
- \
- /usr/local/X11/include \
- /usr/local/X11R6/include \
- /usr/local/X11R5/include \
- /usr/local/X11R4/include \
- \
- /usr/local/include/X11 \
- /usr/local/include/X11R6 \
- /usr/local/include/X11R5 \
- /usr/local/include/X11R4 \
- \
- /usr/X386/include \
- /usr/x386/include \
- /usr/XFree86/include/X11 \
- \
- /usr/include \
- /usr/local/include \
- /usr/unsupported/include \
- /usr/athena/include \
- /usr/local/x11r5/include \
- /usr/lpp/Xamples/include \
- \
- /usr/openwin/include \
- /usr/openwin/share/include \
- ; \
- do
- if test -r "$ac_dir/$x_direct_test_include"; then
- ac_x_includes=$ac_dir
- break
- fi
- done
+ ac_cv_header_stdc=no
fi
rm -f conftest*
-fi # $ac_x_includes = NO
-if test "$ac_x_libraries" = NO; then
- # Check for the libraries.
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 7864 "configure"
+#include "confdefs.h"
+#include <string.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "memchr" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
- test -z "$x_direct_test_library" && x_direct_test_library=Xt
- test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
+fi
- # See if we find them without any special options.
- # Don't add to $LIBS permanently.
- ac_save_LIBS="$LIBS"
- LIBS="-l$x_direct_test_library $LIBS"
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 6575 "configure"
+#line 7882 "configure"
#include "confdefs.h"
-
-int main() {
-${x_direct_test_function}()
-; return 0; }
+#include <stdlib.h>
EOF
-if { (eval echo configure:6582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- LIBS="$ac_save_LIBS"
-# We can link X programs with no special library path.
-ac_x_libraries=
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "free" >/dev/null 2>&1; then
+ :
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
- LIBS="$ac_save_LIBS"
-# First see if replacing the include by lib works.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
- /usr/X11/lib \
- /usr/X11R6/lib \
- /usr/X11R5/lib \
- /usr/X11R4/lib \
- \
- /usr/lib/X11 \
- /usr/lib/X11R6 \
- /usr/lib/X11R5 \
- /usr/lib/X11R4 \
- \
- /usr/local/X11/lib \
- /usr/local/X11R6/lib \
- /usr/local/X11R5/lib \
- /usr/local/X11R4/lib \
- \
- /usr/local/lib/X11 \
- /usr/local/lib/X11R6 \
- /usr/local/lib/X11R5 \
- /usr/local/lib/X11R4 \
- \
- /usr/X386/lib \
- /usr/x386/lib \
- /usr/XFree86/lib/X11 \
- \
- /usr/lib \
- /usr/local/lib \
- /usr/unsupported/lib \
- /usr/athena/lib \
- /usr/local/x11r5/lib \
- /usr/lpp/Xamples/lib \
- /lib/usr/lib/X11 \
- \
- /usr/openwin/lib \
- /usr/openwin/share/lib \
- ; \
-do
- for ac_extension in a so sl; do
- if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
- ac_x_libraries=$ac_dir
- break 2
- fi
- done
-done
+ ac_cv_header_stdc=no
fi
rm -f conftest*
-fi # $ac_x_libraries = NO
-if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
- # Didn't find X anywhere. Cache the known absence of X.
- ac_cv_have_x="have_x=no"
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+ :
else
- # Record where we found X for the cache.
- ac_cv_have_x="have_x=yes \
- ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
+ cat > conftest.$ac_ext <<EOF
+#line 7903 "configure"
+#include "confdefs.h"
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
+
+EOF
+if { (eval echo configure:7914: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_header_stdc=no
fi
+rm -fr conftest*
fi
- fi
- eval "$ac_cv_have_x"
-fi # $with_x != no
-if test "$have_x" != yes; then
- echo "$ac_t""$have_x" 1>&6
- no_x=yes
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+ cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
+EOF
+
+fi
+
+echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
+echo "configure:7938: checking for ssize_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 7943 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])ssize_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_ssize_t=yes
else
- # If each of the values was on the command line, it overrides each guess.
- test "x$x_includes" = xNONE && x_includes=$ac_x_includes
- test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
- # Update the cache value to reflect the command line values.
- ac_cv_have_x="have_x=yes \
- ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
- echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
+ rm -rf conftest*
+ ac_cv_type_ssize_t=no
fi
+rm -f conftest*
-if test "$no_x" = yes; then
- # Not all programs may use this symbol, but it does not hurt to define it.
+fi
+echo "$ac_t""$ac_cv_type_ssize_t" 1>&6
+if test $ac_cv_type_ssize_t = no; then
cat >> confdefs.h <<\EOF
-#define X_DISPLAY_MISSING 1
+#define ssize_t int
EOF
- X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
-else
- if test -n "$x_includes"; then
- X_CFLAGS="$X_CFLAGS -I$x_includes"
- fi
+fi
- # It would also be nice to do this for all -L options, not just this one.
- if test -n "$x_libraries"; then
- X_LIBS="$X_LIBS -L$x_libraries"
- # For Solaris; some versions of Sun CC require a space after -R and
- # others require no space. Words are not sufficient . . . .
- case "`(uname -sr) 2>/dev/null`" in
- "SunOS 5"*)
- echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:6688: checking whether -R must be followed by a space" >&5
- ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
- cat > conftest.$ac_ext <<EOF
-#line 6691 "configure"
-#include "confdefs.h"
+echo $ac_n "checking for in_addr_t""... $ac_c" 1>&6
+echo "configure:7972: checking for in_addr_t" >&5
+cat > conftest.$ac_ext <<EOF
+#line 7974 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+#if HAVE_NETINET_IN_H
+#include <netinet/in.h>
+#endif
int main() {
-
+in_addr_t foo;
; return 0; }
EOF
-if { (eval echo configure:6698: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7988: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- ac_R_nospace=yes
+ cat >> confdefs.h <<\EOF
+#define HAVE_IN_ADDR_T 1
+EOF
+
+ echo "$ac_t""yes" 1>&6
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- ac_R_nospace=no
+ echo "$ac_t""no" 1>&6
fi
rm -f conftest*
- if test $ac_R_nospace = yes; then
- echo "$ac_t""no" 1>&6
- X_LIBS="$X_LIBS -R$x_libraries"
- else
- LIBS="$ac_xsave_LIBS -R $x_libraries"
- cat > conftest.$ac_ext <<EOF
-#line 6714 "configure"
-#include "confdefs.h"
+echo $ac_n "checking whether struct ip_mreq is in netinet/in.h""... $ac_c" 1>&6
+echo "configure:8004: checking whether struct ip_mreq is in netinet/in.h" >&5
+cat > conftest.$ac_ext <<EOF
+#line 8006 "configure"
+#include "confdefs.h"
+#include <netinet/in.h>
int main() {
-
+struct ip_mreq mreq;
; return 0; }
EOF
-if { (eval echo configure:6721: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8013: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- ac_R_space=yes
+ cat >> confdefs.h <<\EOF
+#define HAVE_STRUCT_IP_MREQ 1
+EOF
+
+ echo "$ac_t""yes" 1>&6
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- ac_R_space=no
+ echo "$ac_t""no" 1>&6
fi
rm -f conftest*
- if test $ac_R_space = yes; then
- echo "$ac_t""yes" 1>&6
- X_LIBS="$X_LIBS -R $x_libraries"
- else
- echo "$ac_t""neither works" 1>&6
- fi
- fi
- LIBS="$ac_xsave_LIBS"
- esac
- fi
-
- # Check for system-dependent libraries X programs must link with.
- # Do this before checking for the system-independent R6 libraries
- # (-lICE), since we may need -lsocket or whatever for X linking.
- if test "$ISC" = yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
- else
- # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X
- # libraries were built with DECnet support. And karl@cs.umb.edu says
- # the Alpha needs dnet_stub (dnet does not exist).
- echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:6753: checking for dnet_ntoa in -ldnet" >&5
-ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-ldnet $LIBS"
+echo $ac_n "checking whether struct ipv6_mreq is in netinet/in.h""... $ac_c" 1>&6
+echo "configure:8029: checking whether struct ipv6_mreq is in netinet/in.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 6761 "configure"
+#line 8031 "configure"
#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char dnet_ntoa();
-
+#include <netinet/in.h>
int main() {
-dnet_ntoa()
+struct ipv6_mreq mreq6;
; return 0; }
EOF
-if { (eval echo configure:6772: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8038: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ cat >> confdefs.h <<\EOF
+#define HAVE_STRUCT_IPV6_MREQ 1
+EOF
+
+ echo "$ac_t""yes" 1>&6
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ echo "$ac_t""no" 1>&6
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
+echo $ac_n "checking whether struct sockaddr_in6 is in netinet/in.h""... $ac_c" 1>&6
+echo "configure:8054: checking whether struct sockaddr_in6 is in netinet/in.h" >&5
+cat > conftest.$ac_ext <<EOF
+#line 8056 "configure"
+#include "confdefs.h"
+#include <netinet/in.h>
+int main() {
+struct sockaddr_in6 addr6;
+; return 0; }
+EOF
+if { (eval echo configure:8063: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ cat >> confdefs.h <<\EOF
+#define HAVE_INET6 1
+EOF
+
+ echo "$ac_t""yes" 1>&6
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
echo "$ac_t""no" 1>&6
fi
+rm -f conftest*
- if test $ac_cv_lib_dnet_dnet_ntoa = no; then
- echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:6794: checking for dnet_ntoa in -ldnet_stub" >&5
-ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-ldnet_stub $LIBS"
+echo $ac_n "checking for socklen_t in sys/socket.h""... $ac_c" 1>&6
+echo "configure:8079: checking for socklen_t in sys/socket.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 6802 "configure"
+#line 8081 "configure"
#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char dnet_ntoa();
-
+#define _POSIX_PII_SOCKET
+#include <sys/types.h>
+#include <sys/socket.h>
int main() {
-dnet_ntoa()
+socklen_t x = 5;
; return 0; }
EOF
-if { (eval echo configure:6813: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8090: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ cat >> confdefs.h <<\EOF
+#define HAVE_SOCKLEN_T 1
+EOF
+
+ echo "$ac_t""yes" 1>&6
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ echo "$ac_t""no" 1>&6
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
+echo $ac_n "checking for tm_gmtoff in struct tm""... $ac_c" 1>&6
+echo "configure:8106: checking for tm_gmtoff in struct tm" >&5
+cat > conftest.$ac_ext <<EOF
+#line 8108 "configure"
+#include "confdefs.h"
+#include <time.h>
+int main() {
+struct tm tim; tim.tm_gmtoff = 0;
+; return 0; }
+EOF
+if { (eval echo configure:8115: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ cat >> confdefs.h <<\EOF
+#define STRUCT_TM_HAS_GMTOFF 1
+EOF
+
+ echo "$ac_t""yes" 1>&6
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
echo "$ac_t""no" 1>&6
-fi
-
- fi
+ echo $ac_n "checking for global timezone variable""... $ac_c" 1>&6
+echo "configure:8128: checking for global timezone variable" >&5
+ cat > conftest.$ac_ext <<EOF
+#line 8130 "configure"
+#include "confdefs.h"
+#include <time.h>
+int main() {
+void i(){long z2 = 2*timezone;}
+; return 0; }
+EOF
+if { (eval echo configure:8137: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ cat >> confdefs.h <<\EOF
+#define HAVE_TIMEZONE 1
+EOF
- # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
- # to get the SysV transport functions.
- # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4)
- # needs -lnsl.
- # The nsl library prevents programs from opening the X display
- # on Irix 5.2, according to dickey@clark.net.
- echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:6842: checking for gethostbyname" >&5
-if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ echo "$ac_t""yes" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 6847 "configure"
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6
+ echo $ac_n "checking for global _timezone variable""... $ac_c" 1>&6
+echo "configure:8150: checking for global _timezone variable" >&5
+ cat > conftest.$ac_ext <<EOF
+#line 8152 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char gethostbyname(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char gethostbyname();
-
+#include <time.h>
int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
-choke me
-#else
-gethostbyname();
-#endif
-
+long z2 = _timezone;
; return 0; }
EOF
-if { (eval echo configure:6870: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8159: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- eval "ac_cv_func_gethostbyname=yes"
+ cat >> confdefs.h <<\EOF
+#define HAVE_UNDERSCORE_TIMEZONE 1
+EOF
+
+ echo "$ac_t""yes" 1>&6
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_gethostbyname=no"
+ echo "$ac_t""no" 1>&6
fi
rm -f conftest*
fi
-
-if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
+rm -f conftest*
fi
+rm -f conftest*
- if test $ac_cv_func_gethostbyname = no; then
- echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:6891: checking for gethostbyname in -lnsl" >&5
-ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments. Useless!
+echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
+echo "configure:8181: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- ac_save_LIBS="$LIBS"
-LIBS="-lnsl $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 6899 "configure"
+ cat > conftest.$ac_ext <<EOF
+#line 8186 "configure"
#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char gethostbyname();
-
+#include <alloca.h>
int main() {
-gethostbyname()
+char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:6910: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ ac_cv_header_alloca_h=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ ac_cv_header_alloca_h=no
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
-else
- echo "$ac_t""no" 1>&6
fi
- fi
+echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
+if test $ac_cv_header_alloca_h = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA_H 1
+EOF
- # lieder@skyler.mavd.honeywell.com says without -lsocket,
- # socket/setsockopt and other routines are undefined under SCO ODT
- # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary
- # on later versions), says simon@lia.di.epfl.ch: it contains
- # gethostby* variants that don't use the nameserver (or something).
- # -lsocket must be given before -lnsl if both are needed.
- # We assume that if connect needs -lnsl, so does gethostbyname.
- echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:6940: checking for connect" >&5
-if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
+fi
+
+echo $ac_n "checking for alloca""... $ac_c" 1>&6
+echo "configure:8214: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6945 "configure"
+#line 8219 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char connect(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char connect();
-
-int main() {
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_connect) || defined (__stub___connect)
-choke me
+#ifdef __GNUC__
+# define alloca __builtin_alloca
#else
-connect();
+# ifdef _MSC_VER
+# include <malloc.h>
+# define alloca _alloca
+# else
+# if HAVE_ALLOCA_H
+# include <alloca.h>
+# else
+# ifdef _AIX
+ #pragma alloca
+# else
+# ifndef alloca /* predefined by HP cc +Olibcalls */
+char *alloca ();
+# endif
+# endif
+# endif
+# endif
#endif
+int main() {
+char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:6968: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8247: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_func_connect=yes"
+ ac_cv_func_alloca_works=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_connect=no"
+ ac_cv_func_alloca_works=no
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
+echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
+if test $ac_cv_func_alloca_works = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA 1
+EOF
+
fi
- if test $ac_cv_func_connect = no; then
- echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:6989: checking for connect in -lsocket" >&5
-ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+if test $ac_cv_func_alloca_works = no; then
+ # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+ # that cause trouble. Some versions do not even contain alloca or
+ # contain a buggy version. If you still want to use their alloca,
+ # use ar to extract alloca.o from them instead of compiling alloca.c.
+ ALLOCA=alloca.${ac_objext}
+ cat >> confdefs.h <<\EOF
+#define C_ALLOCA 1
+EOF
+
+
+echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
+echo "configure:8279: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- ac_save_LIBS="$LIBS"
-LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 6997 "configure"
+ cat > conftest.$ac_ext <<EOF
+#line 8284 "configure"
#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char connect();
+#if defined(CRAY) && ! defined(CRAY2)
+webecray
+#else
+wenotbecray
+#endif
-int main() {
-connect()
-; return 0; }
EOF
-if { (eval echo configure:7008: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "webecray" >/dev/null 2>&1; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ ac_cv_os_cray=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ ac_cv_os_cray=no
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
-else
- echo "$ac_t""no" 1>&6
-fi
-
- fi
- # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
- echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:7032: checking for remove" >&5
-if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
+echo "$ac_t""$ac_cv_os_cray" 1>&6
+if test $ac_cv_os_cray = yes; then
+for ac_func in _getb67 GETB67 getb67; do
+ echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:8309: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7037 "configure"
+#line 8314 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char remove(); below. */
+ which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char remove();
+char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined (__stub_remove) || defined (__stub___remove)
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-remove();
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:7060: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8337: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_func_remove=yes"
+ eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_remove=no"
+ eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
- :
+ cat >> confdefs.h <<EOF
+#define CRAY_STACKSEG_END $ac_func
+EOF
+
+ break
else
echo "$ac_t""no" 1>&6
fi
- if test $ac_cv_func_remove = no; then
- echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:7081: checking for remove in -lposix" >&5
-ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+done
+fi
+
+echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
+echo "configure:8364: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- ac_save_LIBS="$LIBS"
-LIBS="-lposix $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 7089 "configure"
+ if test "$cross_compiling" = yes; then
+ ac_cv_c_stack_direction=0
+else
+ cat > conftest.$ac_ext <<EOF
+#line 8372 "configure"
#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char remove();
+find_stack_direction ()
+{
+ static char *addr = 0;
+ auto char dummy;
+ if (addr == 0)
+ {
+ addr = &dummy;
+ return find_stack_direction ();
+ }
+ else
+ return (&dummy > addr) ? 1 : -1;
+}
+main ()
+{
+ exit (find_stack_direction() < 0);
+}
+EOF
+if { (eval echo configure:8391: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_c_stack_direction=1
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_c_stack_direction=-1
+fi
+rm -fr conftest*
+fi
-int main() {
-remove()
-; return 0; }
+fi
+
+echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
+cat >> confdefs.h <<EOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+EOF
+
+fi
+
+for ac_hdr in unistd.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:8416: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 8421 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
EOF
-if { (eval echo configure:7100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:8426: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ eval "ac_cv_header_$ac_safe=yes"
else
+ echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
-
fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
else
echo "$ac_t""no" 1>&6
fi
+done
- fi
-
- # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
- echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:7124: checking for shmat" >&5
-if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
+for ac_func in getpagesize
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:8455: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7129 "configure"
+#line 8460 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shmat(); below. */
+ which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char shmat();
+char $ac_func();
int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
-#if defined (__stub_shmat) || defined (__stub___shmat)
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-shmat();
+$ac_func();
#endif
; return 0; }
EOF
-if { (eval echo configure:7152: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8483: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_func_shmat=yes"
+ eval "ac_cv_func_$ac_func=yes"
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_func_shmat=no"
+ eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
- :
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
else
echo "$ac_t""no" 1>&6
fi
+done
- if test $ac_cv_func_shmat = no; then
- echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:7173: checking for shmat in -lipc" >&5
-ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+echo $ac_n "checking for working mmap""... $ac_c" 1>&6
+echo "configure:8508: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- ac_save_LIBS="$LIBS"
-LIBS="-lipc $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 7181 "configure"
+ if test "$cross_compiling" = yes; then
+ ac_cv_func_mmap_fixed_mapped=no
+else
+ cat > conftest.$ac_ext <<EOF
+#line 8516 "configure"
#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char shmat();
-int main() {
-shmat()
-; return 0; }
+/* Thanks to Mike Haertel and Jim Avera for this test.
+ Here is a matrix of mmap possibilities:
+ mmap private not fixed
+ mmap private fixed at somewhere currently unmapped
+ mmap private fixed at somewhere already mapped
+ mmap shared not fixed
+ mmap shared fixed at somewhere currently unmapped
+ mmap shared fixed at somewhere already mapped
+ For private mappings, we should verify that changes cannot be read()
+ back from the file, nor mmap's back from the file at a different
+ address. (There have been systems where private was not correctly
+ implemented like the infamous i386 svr4.0, and systems where the
+ VM page cache was not coherent with the filesystem buffer cache
+ like early versions of FreeBSD and possibly contemporary NetBSD.)
+ For shared mappings, we should conversely verify that changes get
+ propogated back to all the places they're supposed to be.
+
+ Grep wants private fixed already mapped.
+ The main things grep needs to know about mmap are:
+ * does it exist and is it safe to write into the mmap'd area
+ * how to use it (BSD variants) */
+#include <sys/types.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+
+/* This mess was copied from the GNU getpagesize.h. */
+#ifndef HAVE_GETPAGESIZE
+# ifdef HAVE_UNISTD_H
+# include <unistd.h>
+# endif
+
+/* Assume that all systems that can run configure have sys/param.h. */
+# ifndef HAVE_SYS_PARAM_H
+# define HAVE_SYS_PARAM_H 1
+# endif
+
+# ifdef _SC_PAGESIZE
+# define getpagesize() sysconf(_SC_PAGESIZE)
+# else /* no _SC_PAGESIZE */
+# ifdef HAVE_SYS_PARAM_H
+# include <sys/param.h>
+# ifdef EXEC_PAGESIZE
+# define getpagesize() EXEC_PAGESIZE
+# else /* no EXEC_PAGESIZE */
+# ifdef NBPG
+# define getpagesize() NBPG * CLSIZE
+# ifndef CLSIZE
+# define CLSIZE 1
+# endif /* no CLSIZE */
+# else /* no NBPG */
+# ifdef NBPC
+# define getpagesize() NBPC
+# else /* no NBPC */
+# ifdef PAGESIZE
+# define getpagesize() PAGESIZE
+# endif /* PAGESIZE */
+# endif /* no NBPC */
+# endif /* no NBPG */
+# endif /* no EXEC_PAGESIZE */
+# else /* no HAVE_SYS_PARAM_H */
+# define getpagesize() 8192 /* punt totally */
+# endif /* no HAVE_SYS_PARAM_H */
+# endif /* no _SC_PAGESIZE */
+
+#endif /* no HAVE_GETPAGESIZE */
+
+#ifdef __cplusplus
+extern "C" { void *malloc(unsigned); }
+#else
+char *malloc();
+#endif
+
+int
+main()
+{
+ char *data, *data2, *data3;
+ int i, pagesize;
+ int fd;
+
+ pagesize = getpagesize();
+
+ /*
+ * First, make a file with some known garbage in it.
+ */
+ data = malloc(pagesize);
+ if (!data)
+ exit(1);
+ for (i = 0; i < pagesize; ++i)
+ *(data + i) = rand();
+ umask(0);
+ fd = creat("conftestmmap", 0600);
+ if (fd < 0)
+ exit(1);
+ if (write(fd, data, pagesize) != pagesize)
+ exit(1);
+ close(fd);
+
+ /*
+ * Next, try to mmap the file at a fixed address which
+ * already has something else allocated at it. If we can,
+ * also make sure that we see the same garbage.
+ */
+ fd = open("conftestmmap", O_RDWR);
+ if (fd < 0)
+ exit(1);
+ data2 = malloc(2 * pagesize);
+ if (!data2)
+ exit(1);
+ data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
+ if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_FIXED, fd, 0L))
+ exit(1);
+ for (i = 0; i < pagesize; ++i)
+ if (*(data + i) != *(data2 + i))
+ exit(1);
+
+ /*
+ * Finally, make sure that changes to the mapped area
+ * do not percolate back to the file as seen by read().
+ * (This is a bug on some variants of i386 svr4.0.)
+ */
+ for (i = 0; i < pagesize; ++i)
+ *(data2 + i) = *(data2 + i) + 1;
+ data3 = malloc(pagesize);
+ if (!data3)
+ exit(1);
+ if (read(fd, data3, pagesize) != pagesize)
+ exit(1);
+ for (i = 0; i < pagesize; ++i)
+ if (*(data + i) != *(data3 + i))
+ exit(1);
+ close(fd);
+ unlink("conftestmmap");
+ exit(0);
+}
+
EOF
-if { (eval echo configure:7192: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+if { (eval echo configure:8656: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_func_mmap_fixed_mapped=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ rm -fr conftest*
+ ac_cv_func_mmap_fixed_mapped=no
+fi
+rm -fr conftest*
fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
-else
- echo "$ac_t""no" 1>&6
+
+echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
+if test $ac_cv_func_mmap_fixed_mapped = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_MMAP 1
+EOF
+
fi
- fi
- fi
- # Check for libraries that X11R6 Xt/Xaw programs need.
- ac_save_LDFLAGS="$LDFLAGS"
- test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
- # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
- # check for ICE first), but we must link in the order -lSM -lICE or
- # we get undefined symbols. So assume we have SM if we have ICE.
- # These have to be linked with before -lX11, unlike the other
- # libraries we check for below, so use a different variable.
- # --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
- echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:7225: checking for IceConnectionNumber in -lICE" >&5
-ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+for ac_prog in perl
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:8684: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_PERL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- ac_save_LIBS="$LIBS"
-LIBS="-lICE $X_EXTRA_LIBS $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 7233 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char IceConnectionNumber();
-
-int main() {
-IceConnectionNumber()
-; return 0; }
-EOF
-if { (eval echo configure:7244: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ if test -n "$PERL"; then
+ ac_cv_prog_PERL="$PERL" # Let the user override the test.
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_PERL="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
+PERL="$ac_cv_prog_PERL"
+if test -n "$PERL"; then
+ echo "$ac_t""$PERL" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- LDFLAGS="$ac_save_LDFLAGS"
+test -n "$PERL" && break
+done
+test -n "$PERL" || PERL="false"
-fi
+SYSDEP_SOURCES=
-# Check whether --enable-java-awt or --disable-java-awt was given.
-if test "${enable_java_awt+set}" = set; then
- enableval="$enable_java_awt"
- :
-fi
+case "${host}" in
+ i?86-*-linux*)
+ SIGNAL_HANDLER=include/i386-signal.h
+ ;;
+ sparc*-sun-solaris*)
+ SIGNAL_HANDLER=include/sparc-signal.h
+ ;;
+# ia64-*)
+# SYSDEP_SOURCES=sysdep/ia64.c
+# test -d sysdep || mkdir sysdep
+# ;;
+ ia64-*-linux*)
+ SIGNAL_HANDLER=include/dwarf2-signal.h
+ ;;
+ powerpc-*-linux*)
+ SIGNAL_HANDLER=include/powerpc-signal.h
+ ;;
+ alpha*-*-linux*)
+ SIGNAL_HANDLER=include/dwarf2-signal.h
+ ;;
+ s390*-*-linux*)
+ SIGNAL_HANDLER=include/s390-signal.h
+ ;;
+ x86_64*-*-linux*)
+ SIGNAL_HANDLER=include/x86_64-signal.h
+ ;;
+ sparc*-*-linux*)
+ SIGNAL_HANDLER=include/dwarf2-signal.h
+ ;;
+ sh-*-linux* | sh[34]*-*-linux*)
+ SIGNAL_HANDLER=include/dwarf2-signal.h
+ ;;
+ *mingw*)
+ SIGNAL_HANDLER=include/win32-signal.h
+ ;;
+ *)
+ SIGNAL_HANDLER=include/default-signal.h
+ ;;
+esac
+# If we're using sjlj exceptions, forget what we just learned.
+if test "$enable_sjlj_exceptions" = yes; then
+ SIGNAL_HANDLER=include/default-signal.h
+fi
-peerlibs="`echo ${enable_java_awt} | tr ',' ' '`"
-use_xlib_awt=""
-use_gtk_awt=""
+# Define here any compiler flags that you need in order to make backtrace() work.
+BACKTRACESPEC=
+case "${host}" in
+ x86_64*-*-linux*)
+ BACKTRACESPEC=-fno-omit-frame-pointer
+ ;;
+esac
-for peer in $peerlibs ; do
- case $peer in
- xlib)
- if test "$no_x" = yes; then
- echo "*** xlib peers requested but no X library available" 1>&2
- exit 1
- else
- use_xlib_awt="yes"
- fi
- ;;
- gtk)
- # Nothing, yet...
- ;;
- no)
- use_xlib_awt=
- use_gtk_awt=
- break
- ;;
- *)
- echo "*** unrecognised argument \"${peer}\" for --enable-java-awt" 1>&2
- exit 1
- esac
-done
-if test "$use_xlib_awt" = yes; then
- XLIB_AWT_TRUE=
- XLIB_AWT_FALSE='#'
-else
- XLIB_AWT_TRUE='#'
- XLIB_AWT_FALSE=
-fi
-if test "$use_gtk_awt" = yes; then
- GTK_AWT_TRUE=
- GTK_AWT_FALSE='#'
+if test "${multilib}" = "yes"; then
+ multilib_arg="--enable-multilib"
else
- GTK_AWT_TRUE='#'
- GTK_AWT_FALSE=
+ multilib_arg=
fi
-here=`pwd`
+
+here=`${PWDCMD-pwd}`
# We get this from the environment.
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "Makefile libgcj.spec libgcj-test.spec gnu/classpath/Configuration.java gcj/Makefile include/Makefile testsuite/Makefile include/config.h gcj/libgcj-config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile libgcj.pc libgcj.spec libgcj-test.spec gnu/classpath/Configuration.java gcj/Makefile include/Makefile testsuite/Makefile include/config.h gcj/libgcj-config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@CC@%$CC%g
-s%@glibcpp_CXX@%$glibcpp_CXX%g
+s%@glibjava_CXX@%$glibjava_CXX%g
s%@CXX@%$CXX%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@TESTSUBDIR_TRUE@%$TESTSUBDIR_TRUE%g
s%@TESTSUBDIR_FALSE@%$TESTSUBDIR_FALSE%g
s%@LIBGCJDEBUG@%$LIBGCJDEBUG%g
+s%@INTERPRETER@%$INTERPRETER%g
s%@LIBFFI@%$LIBFFI%g
s%@LIBFFIINCS@%$LIBFFIINCS%g
s%@PLATFORMOBJS@%$PLATFORMOBJS%g
s%@LIBGCJTESTSPEC@%$LIBGCJTESTSPEC%g
s%@ZLIBSPEC@%$ZLIBSPEC%g
s%@ZLIBTESTSPEC@%$ZLIBTESTSPEC%g
+s%@X_CFLAGS@%$X_CFLAGS%g
+s%@X_PRE_LIBS@%$X_PRE_LIBS%g
+s%@X_LIBS@%$X_LIBS%g
+s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g
+s%@TOOLKIT@%$TOOLKIT%g
+s%@XLIB_AWT_TRUE@%$XLIB_AWT_TRUE%g
+s%@XLIB_AWT_FALSE@%$XLIB_AWT_FALSE%g
+s%@GTK_AWT_TRUE@%$GTK_AWT_TRUE%g
+s%@GTK_AWT_FALSE@%$GTK_AWT_FALSE%g
s%@GCLIBS@%$GCLIBS%g
s%@GCINCS@%$GCINCS%g
s%@GCDEPS@%$GCDEPS%g
s%@THREADDEPS@%$THREADDEPS%g
s%@THREADOBJS@%$THREADOBJS%g
s%@THREADSPEC@%$THREADSPEC%g
+s%@THREADLDFLAGS@%$THREADLDFLAGS%g
+s%@THREADCXXFLAGS@%$THREADCXXFLAGS%g
s%@HASH_SYNC_SPEC@%$HASH_SYNC_SPEC%g
s%@USING_GCC_TRUE@%$USING_GCC_TRUE%g
s%@USING_GCC_FALSE@%$USING_GCC_FALSE%g
+s%@tool_include_dir@%$tool_include_dir%g
+s%@gcc_version@%$gcc_version%g
s%@LIBICONV@%$LIBICONV%g
+s%@PKG_CONFIG@%$PKG_CONFIG%g
+s%@GTK_CFLAGS@%$GTK_CFLAGS%g
+s%@GTK_LIBS@%$GTK_LIBS%g
+s%@GLIB_CFLAGS@%$GLIB_CFLAGS%g
+s%@GLIB_LIBS@%$GLIB_LIBS%g
+s%@GLIB_GENMARSHAL@%$GLIB_GENMARSHAL%g
+s%@GOBJECT_QUERY@%$GOBJECT_QUERY%g
+s%@GLIB_MKENUMS@%$GLIB_MKENUMS%g
+s%@LIBART_CONFIG@%$LIBART_CONFIG%g
+s%@LIBART_CFLAGS@%$LIBART_CFLAGS%g
+s%@LIBART_LIBS@%$LIBART_LIBS%g
s%@GCJ@%$GCJ%g
s%@GCJFLAGS@%$GCJFLAGS%g
s%@ZLIBS@%$ZLIBS%g
-s%@ZDEPS@%$ZDEPS%g
+s%@SYS_ZLIBS@%$SYS_ZLIBS%g
s%@ZINCS@%$ZINCS%g
s%@DIVIDESPEC@%$DIVIDESPEC%g
+s%@CHECKREFSPEC@%$CHECKREFSPEC%g
s%@EXCEPTIONSPEC@%$EXCEPTIONSPEC%g
+s%@IEEESPEC@%$IEEESPEC%g
s%@CANADIAN_TRUE@%$CANADIAN_TRUE%g
s%@CANADIAN_FALSE@%$CANADIAN_FALSE%g
s%@NULL_TARGET_TRUE@%$NULL_TARGET_TRUE%g
s%@NULL_TARGET_FALSE@%$NULL_TARGET_FALSE%g
s%@NATIVE_TRUE@%$NATIVE_TRUE%g
s%@NATIVE_FALSE@%$NATIVE_FALSE%g
-s%@USE_LIBDIR_TRUE@%$USE_LIBDIR_TRUE%g
-s%@USE_LIBDIR_FALSE@%$USE_LIBDIR_FALSE%g
s%@NEEDS_DATA_START_TRUE@%$NEEDS_DATA_START_TRUE%g
s%@NEEDS_DATA_START_FALSE@%$NEEDS_DATA_START_FALSE%g
s%@GCC_UNWIND_INCLUDE@%$GCC_UNWIND_INCLUDE%g
+s%@toolexecdir@%$toolexecdir%g
+s%@toolexecmainlibdir@%$toolexecmainlibdir%g
+s%@toolexeclibdir@%$toolexeclibdir%g
s%@GCJVERSION@%$GCJVERSION%g
-s%@AM_RUNTESTFLAGS@%$AM_RUNTESTFLAGS%g
s%@ALLOCA@%$ALLOCA%g
s%@PERL@%$PERL%g
+s%@BACKTRACESPEC@%$BACKTRACESPEC%g
s%@SYSDEP_SOURCES@%$SYSDEP_SOURCES%g
-s%@X_CFLAGS@%$X_CFLAGS%g
-s%@X_PRE_LIBS@%$X_PRE_LIBS%g
-s%@X_LIBS@%$X_LIBS%g
-s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g
-s%@XLIB_AWT_TRUE@%$XLIB_AWT_TRUE%g
-s%@XLIB_AWT_FALSE@%$XLIB_AWT_FALSE%g
-s%@GTK_AWT_TRUE@%$GTK_AWT_TRUE%g
-s%@GTK_AWT_FALSE@%$GTK_AWT_FALSE%g
s%@here@%$here%g
CEOF
cat >> $CONFIG_STATUS <<EOF
-CONFIG_FILES=\${CONFIG_FILES-"Makefile libgcj.spec libgcj-test.spec gnu/classpath/Configuration.java gcj/Makefile include/Makefile testsuite/Makefile"}
+CONFIG_FILES=\${CONFIG_FILES-"Makefile libgcj.pc libgcj.spec libgcj-test.spec gnu/classpath/Configuration.java gcj/Makefile include/Makefile testsuite/Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
EOF
cat >> $CONFIG_STATUS <<EOF
-ac_sources="include/$PLATFORMH java/io/natFile${PLATFORM}.cc java/io/natFileDescriptor${PLATFORM}.cc java/lang/${PLATFORM}Process.java java/lang/nat${PLATFORM}Process.cc include/$GCHDR include/$THREADH $SIGNAL_HANDLER"
-ac_dests="include/platform.h java/io/natFile.cc java/io/natFileDescriptor.cc java/lang/ConcreteProcess.java java/lang/natConcreteProcess.cc include/java-gc.h include/java-threads.h include/java-signal.h"
+ac_sources="include/$PLATFORMH java/io/natFile${FILE-${PLATFORM}}.cc java/io/natFileDescriptor${FILE-${PLATFORM}}.cc java/lang/${PLATFORM}Process.java java/lang/nat${PLATFORM}Process.cc java/net/natInetAddress${PLATFORMNET}.cc java/net/natNetworkInterface${PLATFORMNET}.cc java/net/natPlainSocketImpl${PLATFORMNET}.cc java/net/natPlainDatagramSocketImpl${PLATFORMNET}.cc include/$GCHDR include/$THREADH sysdep/$sysdeps_dir/locks.h $SIGNAL_HANDLER"
+ac_dests="include/platform.h java/io/natFile.cc java/io/natFileDescriptor.cc java/lang/ConcreteProcess.java java/lang/natConcreteProcess.cc java/net/natInetAddress.cc java/net/natNetworkInterface.cc java/net/natPlainSocketImpl.cc java/net/natPlainDatagramSocketImpl.cc include/java-gc.h include/java-threads.h sysdep/locks.h include/java-signal.h"
EOF
cat >> $CONFIG_STATUS <<\EOF
libgcj_basedir=${libgcj_basedir}
CC="${CC}"
CXX="${CXX}"
+ORIGINAL_LD_FOR_MULTILIBS="${ORIGINAL_LD_FOR_MULTILIBS}"
EOF
cat >> $CONFIG_STATUS <<\EOF
# Only add multilib support code if we just rebuilt top-level Makefile.
case " $CONFIG_FILES " in
*" Makefile "*)
+ LD="${ORIGINAL_LD_FOR_MULTILIBS}"
ac_file=Makefile . ${libgcj_basedir}/../config-ml.in
;;
esac
# Make subdirectories and `.d' files. Look in both srcdir and
# builddir for the .java files.
-h=`pwd`
+h=`${PWDCMD-pwd}`
: > deps.mk
-( (cd $srcdir && find . \( -name '*.java' -o -name '*.cc' \) -print) ;
- find . \( -name '*.java' -o -name '*.cc' \) -print) | \
+( (cd $srcdir && find . \( -name '*.java' -o -name '*.cc' -o -name '*.c' \) -print) ;
+ find . \( -name '*.java' -o -name '*.cc' -o -name '*.c' \) -print) | \
fgrep -v testsuite | \
- sed -e 's/\.java/.d/'\;'s/\.cc/.d/' | \
+ sed -e 's/\.java/.d/'\;'s/\.cc/.d/'\;'s/\.c/.d/' | \
while read f; do
echo "include $f" >> deps.mk
test -f $f || {
OSDN Git Service
