#
# Makefile
-# Copyright (C) 1990, 91-99, 2000, 2001, 2002, 2003, 2004
+# Copyright (C) 1990, 91-99, 2000, 2001, 2002, 2003, 2004, 2005, 2006
# Free Software Foundation
#
# This file is part of the libiberty library.
#
# You should have received a copy of the GNU Library General Public
# License along with libiberty; see the file COPYING.LIB. If not,
-# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
+# write to the Free Software Foundation, Inc., 51 Franklin Street - Fifth Floor,
+# Boston, MA 02110-1301, USA.
#
# This file was written by K. Richard Pixley <rich@cygnus.com>.
cp-demint.c cplus-dem.c \
dyn-string.c \
fdmatch.c ffs.c fibheap.c floatformat.c fnmatch.c \
+ fopen_unlocked.c \
getcwd.c getopt.c getopt1.c getpagesize.c getpwd.c getruntime.c \
gettimeofday.c \
hashtab.c hex.c \
make-temp-file.c md5.c memchr.c memcmp.c memcpy.c memmove.c \
mempcpy.c memset.c mkstemps.c \
objalloc.c obstack.c \
- partition.c \
- pex-djgpp.c pex-msdos.c \
+ partition.c pexecute.c \
+ pex-common.c pex-djgpp.c pex-msdos.c pex-one.c \
pex-unix.c pex-win32.c \
physmem.c putenv.c \
random.c regex.c rename.c rindex.c \
safe-ctype.c setenv.c sigsetmask.c snprintf.c sort.c spaces.c \
splay-tree.c stpcpy.c stpncpy.c strcasecmp.c strchr.c strdup.c \
strerror.c strncasecmp.c strncmp.c strrchr.c strsignal.c \
- strstr.c strtod.c strtol.c strtoul.c strndup.c \
+ strstr.c strtod.c strtol.c strtoul.c strndup.c strverscmp.c \
ternary.c tmpnam.c \
unlink-if-ordinary.c \
vasprintf.c vfork.c vfprintf.c vprintf.c vsnprintf.c vsprintf.c \
./choose-temp.o ./concat.o ./cp-demint.o \
./dyn-string.o \
./fdmatch.o ./fibheap.o ./floatformat.o ./fnmatch.o \
+ ./fopen_unlocked.o \
./getopt.o ./getopt1.o ./getpwd.o ./getruntime.o \
./hashtab.o ./hex.o \
./lbasename.o ./lrealpath.o \
./make-relative-prefix.o ./make-temp-file.o \
./objalloc.o ./obstack.o \
- ./partition.o ./physmem.o @pexecute@ \
+ ./partition.o ./pexecute.o ./physmem.o \
+ ./pex-common.o ./pex-one.o @pexecute@ \
./safe-ctype.o ./sort.o ./spaces.o ./splay-tree.o ./strerror.o \
./strsignal.o \
./ternary.o \
./setenv.o ./sigsetmask.o ./snprintf.o ./stpcpy.o ./stpncpy.o \
./strcasecmp.o ./strchr.o ./strdup.o ./strncasecmp.o \
./strncmp.o ./strndup.o ./strrchr.o ./strstr.o \
- ./strtod.o ./strtol.o ./strtoul.o \
+ ./strtod.o ./strtol.o ./strtoul.o ./strverscmp.o \
./tmpnam.o \
./vasprintf.o ./vfork.o ./vfprintf.o ./vprintf.o ./vsnprintf.o \
./vsprintf.o \
install-info: install-info-subdir
clean-info: clean-info-subdir
dvi: libiberty.dvi dvi-subdir
-html: libiberty.html
+
+LIBIBERTY_PDFFILES = libiberty.pdf
+
+pdf: $(LIBIBERTY_PDFFILES) pdf-subdir
+
+.PHONY: install-pdf
+
+pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+
+install-pdf: $(LIBIBERTY_PDFFILES)
+ @$(NORMAL_INSTALL)
+ test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
+ @list='$(LIBIBERTY_PDFFILES)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(pdf__strip_dir) \
+ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
+ done
+
+# html, install-html targets
+HTMLS = libiberty.html
+
+html: $(HTMLS)
+
+.PHONY: install-html install-html-am install-html-recursive
+
+NORMAL_INSTALL = :
+mkdir_p = mkdir -p --
+
+html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+
+install-html: install-html-recursive install-html-am
+
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
+ @list='$(HTMLS)'; for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
+ f=$(html__strip_dir) \
+ if test -d "$$d$$p"; then \
+ echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
+ else \
+ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
+ fi; \
+ done
+
+install-html-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
TEXISRC = \
$(srcdir)/libiberty.texi \
libiberty.dvi : $(srcdir)/libiberty.texi $(TEXISRC)
texi2dvi $(srcdir)/libiberty.texi
+libiberty.pdf : $(srcdir)/libiberty.texi $(TEXISRC)
+ texi2pdf $(srcdir)/libiberty.texi
+
libiberty.html : $(srcdir)/libiberty.texi $(TEXISRC)
$(MAKEINFO) --no-split --html -I$(srcdir) -o $@ $<
@MAINT@$(srcdir)/functions.texi : stamp-functions
@MAINT@ @true
-@MAINT@stamp-functions : $(CFILES) $(TEXIFILES) $(srcdir)/gather-docs Makefile
+@MAINT@stamp-functions : $(CFILES:%=$(srcdir)/%) $(TEXIFILES:%=$(srcdir)/%) $(srcdir)/gather-docs Makefile
@MAINT@@HAVE_PERL@ $(PERL) $(srcdir)/gather-docs $(srcdir) $(srcdir)/functions.texi $(CFILES) $(TEXIFILES)
@MAINT@ echo stamp > stamp-functions
INSTALL_DEST = @INSTALL_DEST@
install: install_to_$(INSTALL_DEST) install-subdir
+# This is tricky. Even though CC in the Makefile contains
+# multilib-specific flags, it's overridden by FLAGS_TO_PASS from the
+# default multilib, so we have to take LIBCFLAGS into account as well,
+# since it will be passed the multilib flags.
+MULTIOSDIR = `$(CC) $(LIBCFLAGS) -print-multi-os-directory`
install_to_libdir: all
- ${mkinstalldirs} $(DESTDIR)$(libdir)$(MULTISUBDIR)
- $(INSTALL_DATA) $(TARGETLIB) $(DESTDIR)$(libdir)$(MULTISUBDIR)/$(TARGETLIB)n
- ( cd $(DESTDIR)$(libdir)$(MULTISUBDIR) ; $(RANLIB) $(TARGETLIB)n )
- mv -f $(DESTDIR)$(libdir)$(MULTISUBDIR)/$(TARGETLIB)n $(DESTDIR)$(libdir)$(MULTISUBDIR)/$(TARGETLIB)
+ ${mkinstalldirs} $(DESTDIR)$(libdir)/$(MULTIOSDIR)
+ $(INSTALL_DATA) $(TARGETLIB) $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n
+ ( cd $(DESTDIR)$(libdir)/$(MULTIOSDIR) ; chmod 644 $(TARGETLIB)n ;$(RANLIB) $(TARGETLIB)n )
+ mv -f $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)
if test -n "${target_header_dir}"; then \
case "${target_header_dir}" in \
/*) thd=${target_header_dir};; \
- *) thd=${includedir}${MULTISUBDIR}/${target_header_dir};; \
+ *) thd=${includedir}/${target_header_dir};; \
esac; \
${mkinstalldirs} $(DESTDIR)$${thd}; \
for h in ${INSTALLED_HEADERS}; do \
fi
@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install
-# This is tricky. Even though CC in the Makefile contains
-# multilib-specific flags, it's overridden by FLAGS_TO_PASS from the
-# default multilib, so we have to take LIBCFLAGS into account as well,
-# since it will be passed the multilib flags.
-MULTIOSDIR = `$(CC) $(LIBCFLAGS) -print-multi-os-directory`
install_to_tooldir: all
${mkinstalldirs} $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR)
$(INSTALL_DATA) $(TARGETLIB) $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR)/$(TARGETLIB)n
- ( cd $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR) ; $(RANLIB) $(TARGETLIB)n )
+ ( cd $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR) ; chmod 644 $(TARGETLIB)n; $(RANLIB) $(TARGETLIB)n )
mv -f $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR)/$(TARGETLIB)n $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR)/$(TARGETLIB)
@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install
clean: clean-subdir
$(MAKE) SUBDIRS="" mostlyclean
-rm -f *.a required-list tmpmulti.out
- -rm -f libiberty.dvi libiberty.info* libiberty.html
+ -rm -f libiberty.dvi libiberty.pdf libiberty.info* libiberty.html
@$(MULTICLEAN) multi-clean DO=clean
distclean: distclean-subdir
$(MAKE) SUBDIRS="" clean
stamp-h: $(srcdir)/config.in config.status Makefile
CONFIG_FILES= CONFIG_HEADERS=config.h:$(srcdir)/config.in $(SHELL) ./config.status
-config.status: $(srcdir)/configure $(srcdir)/config.table
+config.status: $(srcdir)/configure
$(SHELL) ./config.status --recheck
# Depending on config.h makes sure that config.status has been re-run
# if needed. This prevents problems with parallel builds, in case
# subdirectories need to run config.status also.
all-subdir check-subdir installcheck-subdir info-subdir \
-install-info-subdir clean-info-subdir dvi-subdir install-subdir \
+install-info-subdir clean-info-subdir dvi-subdir pdf-subdir install-subdir \
etags-subdir mostlyclean-subdir clean-subdir distclean-subdir \
maintainer-clean-subdir: config.h
@subdirs='$(SUBDIRS)'; \
else true; fi
$(COMPILE.c) $(srcdir)/alloca.c $(OUTPUT_OPTION)
-./argv.o: $(srcdir)/argv.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+./argv.o: $(srcdir)/argv.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+ $(INCDIR)/safe-ctype.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/argv.c -o pic/$@; \
else true; fi
$(COMPILE.c) $(srcdir)/argv.c $(OUTPUT_OPTION)
-./asprintf.o: $(srcdir)/asprintf.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+./asprintf.o: $(srcdir)/asprintf.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/asprintf.c -o pic/$@; \
else true; fi
else true; fi
$(COMPILE.c) $(srcdir)/atexit.c $(OUTPUT_OPTION)
-./basename.o: $(srcdir)/basename.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
- $(INCDIR)/safe-ctype.h
+./basename.o: $(srcdir)/basename.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h $(INCDIR)/safe-ctype.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/basename.c -o pic/$@; \
else true; fi
else true; fi
$(COMPILE.c) $(srcdir)/dyn-string.c $(OUTPUT_OPTION)
-./fdmatch.o: $(srcdir)/fdmatch.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+./fdmatch.o: $(srcdir)/fdmatch.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/fdmatch.c -o pic/$@; \
else true; fi
else true; fi
$(COMPILE.c) $(srcdir)/fnmatch.c $(OUTPUT_OPTION)
+./fopen_unlocked.o: $(srcdir)/fopen_unlocked.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/fopen_unlocked.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/fopen_unlocked.c $(OUTPUT_OPTION)
+
./getcwd.o: $(srcdir)/getcwd.c config.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/getcwd.c -o pic/$@; \
else true; fi
$(COMPILE.c) $(srcdir)/getcwd.c $(OUTPUT_OPTION)
-./getopt.o: $(srcdir)/getopt.c config.h $(INCDIR)/getopt.h
+./getopt.o: $(srcdir)/getopt.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/getopt.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/getopt.c -o pic/$@; \
else true; fi
else true; fi
$(COMPILE.c) $(srcdir)/hashtab.c $(OUTPUT_OPTION)
-./hex.o: $(srcdir)/hex.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./hex.o: $(srcdir)/hex.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
$(INCDIR)/safe-ctype.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/hex.c -o pic/$@; \
else true; fi
$(COMPILE.c) $(srcdir)/insque.c $(OUTPUT_OPTION)
-./lbasename.o: $(srcdir)/lbasename.c $(INCDIR)/ansidecl.h $(INCDIR)/filenames.h \
- $(INCDIR)/libiberty.h $(INCDIR)/safe-ctype.h
+./lbasename.o: $(srcdir)/lbasename.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/filenames.h $(INCDIR)/libiberty.h \
+ $(INCDIR)/safe-ctype.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/lbasename.c -o pic/$@; \
else true; fi
else true; fi
$(COMPILE.c) $(srcdir)/partition.c $(OUTPUT_OPTION)
+./pex-common.o: $(srcdir)/pex-common.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h $(srcdir)/pex-common.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-common.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/pex-common.c $(OUTPUT_OPTION)
+
./pex-djgpp.o: $(srcdir)/pex-djgpp.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
if [ x"$(PICFLAG)" != x ]; then \
else true; fi
$(COMPILE.c) $(srcdir)/pex-msdos.c $(OUTPUT_OPTION)
+./pex-one.o: $(srcdir)/pex-one.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-one.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/pex-one.c $(OUTPUT_OPTION)
+
./pex-unix.o: $(srcdir)/pex-unix.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
if [ x"$(PICFLAG)" != x ]; then \
else true; fi
$(COMPILE.c) $(srcdir)/pex-win32.c $(OUTPUT_OPTION)
+./pexecute.o: $(srcdir)/pexecute.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/pexecute.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/pexecute.c $(OUTPUT_OPTION)
+
./physmem.o: $(srcdir)/physmem.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
else true; fi
$(COMPILE.c) $(srcdir)/sort.c $(OUTPUT_OPTION)
-./spaces.o: $(srcdir)/spaces.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+./spaces.o: $(srcdir)/spaces.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/spaces.c -o pic/$@; \
else true; fi
else true; fi
$(COMPILE.c) $(srcdir)/strtoul.c $(OUTPUT_OPTION)
+./strverscmp.o: $(srcdir)/strverscmp.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+ $(INCDIR)/safe-ctype.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strverscmp.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strverscmp.c $(OUTPUT_OPTION)
+
./ternary.o: $(srcdir)/ternary.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(INCDIR)/ternary.h
if [ x"$(PICFLAG)" != x ]; then \
else true; fi
$(COMPILE.c) $(srcdir)/vsprintf.c $(OUTPUT_OPTION)
-./waitpid.o: $(srcdir)/waitpid.c config.h
+./waitpid.o: $(srcdir)/waitpid.c config.h $(INCDIR)/ansidecl.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/waitpid.c -o pic/$@; \
else true; fi
$(COMPILE.c) $(srcdir)/waitpid.c $(OUTPUT_OPTION)
-./xatexit.o: $(srcdir)/xatexit.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+./xatexit.o: $(srcdir)/xatexit.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/xatexit.c -o pic/$@; \
else true; fi
OSDN Git Service
