#
# Makefile
-# Copyright (C) 1990, 91, 92, 93, 94, 95, 96, 97, 1998
+# Copyright (C) 1990, 91-99, 2000, 2001
# Free Software Foundation
#
# This file is part of the libiberty library.
CFLAGS = @CFLAGS@
LIBCFLAGS = $(CFLAGS)
RANLIB = @RANLIB@
+MAKEINFO = @MAKEINFO@
+PERL = @PERL@
PICFLAG =
TARGETLIB = libiberty.a
LIBOBJS = @LIBOBJS@
-ALLOCA = @ALLOCA@
# A configuration can specify extra .o files that should be included,
# even if they are in libc. (Perhaps the libc version is buggy.)
"LDFLAGS=$(LDFLAGS)" \
"LOADLIBES=$(LOADLIBES)" \
"RANLIB=$(RANLIB)" \
- "SHELL=$(SHELL)"
-
-all: stamp-picdir $(TARGETLIB) needed-list required-list
+ "SHELL=$(SHELL)" \
+ "prefix=$(prefix)" \
+ "exec_prefix=$(exec_prefix)" \
+ "libdir=$(libdir)" \
+ "libsubdir=$(libsubdir)" \
+ "tooldir=$(tooldir)"
+
+# Subdirectories to recurse into. We need to override this during cleaning
+SUBDIRS = testsuite
+
+# FIXME: add @BUILD_INFO@ once we're sure it works for everyone.
+all: stamp-picdir $(TARGETLIB) needed-list required-list all-subdir
@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=all
.PHONY: check installcheck
-check installcheck:
+check: check-subdir
+installcheck: installcheck-subdir
@host_makefile_frag@
INCDIR=$(srcdir)/$(MULTISRCTOP)../include
-COMPILE.c = $(CC) -c @DEFS@ $(LIBCFLAGS) -I. -I$(INCDIR) $(HDEFINES)
+COMPILE.c = $(CC) -c @DEFS@ $(LIBCFLAGS) -I. -I$(INCDIR) $(HDEFINES) @ac_libiberty_warn_cflags@
.c.o:
- test x"$(enable_shared)" != xyes || \
- $(COMPILE.c) $(PICFLAG) $< -o pic/$@
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $< -o pic/$@; \
+ else true; fi
$(COMPILE.c) $<
-info install-info clean-info dvi:
-
-# Include files that are in this directory.
-HFILES = alloca-conf.h
-
# NOTE: If you add new files to the library, add them to this list
# (alphabetical), and add them to REQUIRED_OFILES or funcs in
# configure.in.
-CFILES = asprintf.c alloca.c argv.c atexit.c basename.c bcmp.c bcopy.c \
- bzero.c choose-temp.c clock.c concat.c cplus-dem.c fdmatch.c \
- fnmatch.c getcwd.c getopt.c getopt1.c getpagesize.c \
- getruntime.c floatformat.c hex.c index.c insque.c memchr.c \
- memcmp.c memcpy.c memmove.c memset.c mkstemp.c objalloc.c obstack.c \
- pexecute.c random.c rename.c rindex.c sigsetmask.c spaces.c \
- splay-tree.o strcasecmp.c strncasecmp.c strchr.c strdup.c strerror.c \
- strrchr.c strsignal.c strstr.c strtod.c strtol.c strtoul.c \
- tmpnam.c vasprintf.c vfork.c vfprintf.c vprintf.c vsprintf.c \
- waitpid.c xatexit.c xexit.c xmalloc.c xstrdup.c xstrerror.c
+CFILES = asprintf.c alloca.c argv.c atexit.c basename.c bcmp.c bcopy.c \
+ bsearch.c bzero.c calloc.c choose-temp.c clock.c concat.c cplus-dem.c \
+ cp-demangle.c dyn-string.c fdmatch.c fnmatch.c ffs.c getcwd.c \
+ getpwd.c getopt.c getopt1.c getpagesize.c getruntime.c \
+ floatformat.c hashtab.c hex.c index.c insque.c lbasename.c \
+ md5.c make-temp-file.c memchr.c \
+ memcmp.c memcpy.c memmove.c memset.c mkstemps.c objalloc.c obstack.c \
+ partition.c pexecute.c putenv.c random.c \
+ regex.c rename.c rindex.c setenv.c \
+ sigsetmask.c safe-ctype.c sort.c spaces.c splay-tree.c strcasecmp.c \
+ strncasecmp.c strchr.c strdup.c strerror.c strncmp.c strrchr.c \
+ strsignal.c strstr.c strtod.c strtol.c strtoul.c tmpnam.c vasprintf.c \
+ vfork.c vfprintf.c vprintf.c vsprintf.c waitpid.c xatexit.c xexit.c \
+ xmalloc.c xmemdup.c xstrdup.c xstrerror.c ternary.c fibheap.c
# These are always included in the library.
-REQUIRED_OFILES = argv.o choose-temp.o concat.o cplus-dem.o \
- fdmatch.o fnmatch.o getopt.o getopt1.o getruntime.o hex.o \
- floatformat.o mkstemp.o objalloc.o obstack.o pexecute.o spaces.o \
- splay-tree.o strerror.o strsignal.o xatexit.o xexit.o xmalloc.o \
- xstrdup.o xstrerror.o
-
-$(TARGETLIB): $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS) $(ALLOCA)
- rm -f $(TARGETLIB)
+REQUIRED_OFILES = argv.o alloca.o choose-temp.o concat.o cplus-dem.o \
+ cp-demangle.o dyn-string.o fdmatch.o fnmatch.o getopt.o getopt1.o \
+ getpwd.o getruntime.o hashtab.o hex.o floatformat.o lbasename.o \
+ md5.o make-temp-file.o objalloc.o \
+ obstack.o partition.o pexecute.o regex.o safe-ctype.o sort.o spaces.o \
+ splay-tree.o strerror.o strsignal.o xatexit.o xexit.o xmalloc.o \
+ xmemdup.o xstrdup.o xstrerror.o ternary.o fibheap.o
+
+# These are all the objects that configure may add to the library via
+# $funcs. This list exists here only for "make maint-missing".
+CONFIGURED_OFILES = asprintf.o atexit.o basename.o bcmp.o bcopy.o \
+ bsearch.o bzero.o calloc.o clock.o ffs.o getcwd.o \
+ getpagesize.o index.o insque.o memchr.o memcmp.o memcpy.o \
+ memmove.o memset.o mkstemps.o putenv.o random.o rename.o \
+ rindex.o setenv.o sigsetmask.o strcasecmp.o strchr.o strdup.o \
+ strncasecmp.o strncmp.o strrchr.o strstr.o strtod.o strtol.o \
+ strtoul.o tmpnam.o vasprintf.o vfork.o vfprintf.o vprintf.o \
+ vsprintf.o waitpid.o
+
+$(TARGETLIB): $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS)
+ -rm -f $(TARGETLIB) pic/$(TARGETLIB)
$(AR) $(AR_FLAGS) $(TARGETLIB) \
- $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS) $(ALLOCA)
+ $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS)
$(RANLIB) $(TARGETLIB)
+ if [ x"$(PICFLAG)" != x ]; then \
+ cd pic; \
+ $(AR) $(AR_FLAGS) $(TARGETLIB) \
+ $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS); \
+ $(RANLIB) $(TARGETLIB); \
+ cd ..; \
+ else true; fi
+
+info: libiberty.info info-subdir
+install-info: install-info-subdir
+clean-info: clean-info-subdir
+dvi: libiberty.dvi dvi-subdir
+html: libiberty.html
+
+TEXISRC = \
+ $(srcdir)/libiberty.texi \
+ $(srcdir)/copying-lib.texi \
+ $(srcdir)/obstacks.texi \
+ $(srcdir)/functions.texi
+
+# Additional files that have texi snippets that need to be collected
+# and sorted. Some are here because the sources are imported from
+# elsewhere. Others represent headers in ../include.
+TEXIFILES = fnmatch.txh
+
+libiberty.info : $(srcdir)/libiberty.texi $(TEXISRC)
+ $(MAKEINFO) -I$(srcdir) $(srcdir)/libiberty.texi
+
+libiberty.dvi : $(srcdir)/libiberty.texi $(TEXISRC)
+ texi2dvi $(srcdir)/libiberty.texi
+
+libiberty.html : $(srcdir)/libiberty.texi $(TEXISRC)
+ $(MAKEINFO) --html -I$(srcdir) $(srcdir)/libiberty.texi
+
+@MAINT@$(srcdir)/functions.texi : stamp-functions
+@MAINT@ @true
+
+@MAINT@stamp-functions : $(CFILES) $(TEXIFILES) $(srcdir)/gather-docs Makefile
+@MAINT@@HAVE_PERL@ $(PERL) $(srcdir)/gather-docs $(srcdir) $(srcdir)/functions.texi $(CFILES) $(TEXIFILES)
+@MAINT@ echo stamp > stamp-functions
INSTALL_DEST = @INSTALL_DEST@
-install: install_to_$(INSTALL_DEST)
+install: install_to_$(INSTALL_DEST) install-subdir
install_to_libdir: all
- $(INSTALL_DATA) $(TARGETLIB) $(libdir)$(MULTISUBDIR)/$(TARGETLIB).n
- ( cd $(libdir)$(MULTISUBDIR) ; $(RANLIB) $(TARGETLIB).n )
- mv -f $(libdir)$(MULTISUBDIR)/$(TARGETLIB).n $(libdir)$(MULTISUBDIR)/$(TARGETLIB)
+ $(INSTALL_DATA) $(TARGETLIB) $(libdir)$(MULTISUBDIR)/$(TARGETLIB)n
+ ( cd $(libdir)$(MULTISUBDIR) ; $(RANLIB) $(TARGETLIB)n )
+ mv -f $(libdir)$(MULTISUBDIR)/$(TARGETLIB)n $(libdir)$(MULTISUBDIR)/$(TARGETLIB)
@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install
install_to_tooldir: all
- $(INSTALL_DATA) $(TARGETLIB) $(tooldir)/lib$(MULTISUBDIR)/$(TARGETLIB).n
- ( cd $(tooldir)/lib$(MULTISUBDIR) ; $(RANLIB) $(TARGETLIB).n )
- mv -f $(tooldir)/lib$(MULTISUBDIR)/$(TARGETLIB).n $(tooldir)/lib$(MULTISUBDIR)/$(TARGETLIB)
+ $(INSTALL_DATA) $(TARGETLIB) $(tooldir)/lib$(MULTISUBDIR)/$(TARGETLIB)n
+ ( cd $(tooldir)/lib$(MULTISUBDIR) ; $(RANLIB) $(TARGETLIB)n )
+ mv -f $(tooldir)/lib$(MULTISUBDIR)/$(TARGETLIB)n $(tooldir)/lib$(MULTISUBDIR)/$(TARGETLIB)
@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install
-# needed-list is used by libstdc++.
+# needed-list is used by libstdc++. NEEDED is the list of functions
+# to include there. Do not add anything LGPL to this list; libstdc++
+# can't use anything encumbering.
+NEEDED = atexit calloc memchr memcmp memcpy memmove memset rename strchr \
+ strerror strncmp strrchr strstr strtol strtoul tmpnam vfprintf vprintf \
+ vfork waitpid bcmp bcopy bzero
needed-list: Makefile
- f="$(LIBOBJS) $(ALLOCA) $(EXTRA_OFILES)"; \
- case $$f in \
- *alloca.o*) f="$$f xmalloc.o xexit.o" ;; \
- esac; \
- echo $$f > needed-list
+ rm -f needed-list; touch needed-list; \
+ for f in $(NEEDED); do \
+ for g in $(LIBOBJS) $(EXTRA_OFILES); do \
+ case "$$g" in \
+ *$$f*) echo $$g >> needed-list ;; \
+ esac; \
+ done; \
+ done
# required-list was used when building a shared bfd/opcodes/libiberty
# library. I don't know if it used by anything currently.
echo $(REQUIRED_OFILES) > required-list
stamp-picdir:
- if [ x"$(enable_shared)" = xyes ] && [ ! -d pic ]; then \
+ if [ x"$(PICFLAG)" != x ] && [ ! -d pic ]; then \
mkdir pic; \
else true; fi
touch stamp-picdir
.PHONY: all etags tags ls clean stage1 stage2
-etags tags: TAGS
+etags tags: TAGS etags-subdir
-TAGS: $(CFILES) $(HFILES)
- etags `for i in $(HFILES) $(CFILES); do echo $(srcdir)/$$i ; done`
+TAGS: $(CFILES)
+ etags `for i in $(CFILES); do echo $(srcdir)/$$i ; done`
# The standalone demangler (c++filt) has been moved to binutils.
demangle:
@false
ls:
- @echo Makefile $(HFILES) $(CFILES)
+ @echo Makefile $(CFILES)
+
+# Various targets for maintainers.
+
+maint-missing :
+ @$(PERL) $(srcdir)/maint-tool -s $(srcdir) missing $(CFILES) $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
+
+maint-buildall : $(REQUIRED_OFILES) $(CONFIGURED_OFILES)
+ @true
+
+maint-undoc : $(srcdir)/functions.texi
+ @$(PERL) $(srcdir)/maint-tool -s $(srcdir) undoc
# Need to deal with profiled libraries, too.
-mostlyclean:
- rm -rf *.o pic core errs \#* *.E a.out
- rm -f needed.awk needed2.awk errors dummy needed-list config.h stamp-*
- rm -f $(CONFIG_H) $(NEEDED_LIST) stamp-picdir
+# Cleaning has to be done carefully to ensure that we don't clean our SUBDIRS
+# multiple times, hence our explicit recursion with an empty SUBDIRS.
+mostlyclean: mostlyclean-subdir
+ -rm -rf *.o pic core errs \#* *.E a.out
+ -rm -f needed.awk needed2.awk errors dummy needed-list config.h stamp-*
+ -rm -f $(CONFIG_H) $(NEEDED_LIST) stamp-picdir
+ -rm -f libiberty.aux libiberty.cp libiberty.cps libiberty.fn libiberty.ky
+ -rm -f libiberty.log libiberty.tmp libiberty.tps libiberty.pg
+ -rm -f libiberty.pgs libiberty.toc libiberty.tp libiberty.tpl libiberty.vr
+ -rm -f libtexi.stamp
@$(MULTICLEAN) multi-clean DO=mostlyclean
-clean: mostlyclean
- rm -f *.a required-list tmpmulti.out
+clean: clean-subdir
+ $(MAKE) SUBDIRS="" mostlyclean
+ -rm -f *.a required-list tmpmulti.out
+ -rm -f libiberty.dvi libiberty.info* libiberty.html
@$(MULTICLEAN) multi-clean DO=clean
-distclean: clean
+distclean: distclean-subdir
+ $(MAKE) SUBDIRS="" clean
@$(MULTICLEAN) multi-clean DO=distclean
- rm -f *~ Makefile config.status xhost-mkfrag TAGS multilib.out
- rm -f config.log
-maintainer-clean realclean: distclean
+ -rm -f *~ Makefile config.status xhost-mkfrag TAGS multilib.out
+ -rm -f config.log
+ -rmdir testsuite 2>/dev/null
+maintainer-clean realclean: maintainer-clean-subdir
+ $(MAKE) SUBDIRS="" distclean
force:
config.status: $(srcdir)/configure $(srcdir)/config.table
$(SHELL) ./config.status --recheck
-$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS) $(ALLOCA): stamp-picdir
+all-subdir check-subdir installcheck-subdir info-subdir \
+install-info-subdir clean-info-subdir dvi-subdir install-subdir \
+etags-subdir mostlyclean-subdir clean-subdir distclean-subdir \
+maintainer-clean-subdir:
+ @subdirs='$(SUBDIRS)'; \
+ target=`echo $@ | sed -e 's/-subdir//'`; \
+ for dir in $$subdirs ; do \
+ cd $$dir && $(MAKE) $$target; \
+ done
+
+$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS): stamp-picdir
-alloca.o: config.h
+alloca.o: config.h $(INCDIR)/libiberty.h
atexit.o: config.h
-argv.o: config.h alloca-conf.h $(INCDIR)/libiberty.h
+argv.o: config.h $(INCDIR)/libiberty.h
basename.o: $(INCDIR)/libiberty.h
choose-temp.o: config.h
clock.o: config.h
-concat.o: $(INCDIR)/libiberty.h
+concat.o: config.h $(INCDIR)/libiberty.h
cplus-dem.o: config.h $(INCDIR)/demangle.h
+cp-demangle.o: config.h $(INCDIR)/dyn-string.h $(INCDIR)/demangle.h
+dyn-string.o: config.h $(INCDIR)/dyn-string.h
fdmatch.o: $(INCDIR)/libiberty.h
+fibheap.o: config.h $(INCDIR)/libiberty.h $(INCDIR)/fibheap.h
fnmatch.o: config.h $(INCDIR)/fnmatch.h
getcwd.o: config.h
getopt.o: config.h $(INCDIR)/getopt.h
getopt1.o: config.h $(INCDIR)/getopt.h
getpagesize.o: config.h
+getpwd.o: config.h $(INCDIR)/libiberty.h
getruntime.o: config.h $(INCDIR)/libiberty.h
hex.o: $(INCDIR)/libiberty.h
floatformat.o: $(INCDIR)/floatformat.h
-mkstemp.o: config.h
-objalloc.o: $(INCDIR)/objalloc.h
+lbasename.o: $(INCDIR)/libiberty.h
+make-temp-file.o: config.h
+mkstemps.o: config.h
+md5.o: config.h
+objalloc.o: config.h $(INCDIR)/objalloc.h
obstack.o: config.h $(INCDIR)/obstack.h
+partition.o: config.h $(INCDIR)/partition.h
pexecute.o: config.h $(INCDIR)/libiberty.h
+regex.o: config.h $(INCDIR)/xregex.h $(INCDIR)/xregex2.h
+rename.o: config.h
+setenv.o: config.h
+sort.o: config.h $(INCDIR)/sort.h $(INCDIR)/ansidecl.h
spaces.o: $(INCDIR)/libiberty.h
splay-tree.o: config.h $(INCDIR)/libiberty.h $(INCDIR)/splay-tree.h $(INCDIR)/ansidecl.h
strerror.o: config.h $(INCDIR)/libiberty.h
strsignal.o: config.h $(INCDIR)/libiberty.h
+strtol.o: config.h
+strtoul.o: config.h
+ternary.o: config.h $(INCDIR)/ternary.h $(INCDIR)/libiberty.h
+vasprintf.o: config.h
xatexit.o: $(INCDIR)/libiberty.h
-xexit.o: $(INCDIR)/libiberty.h
-xmalloc.o: $(INCDIR)/libiberty.h
-xstrdup.o: $(INCDIR)/libiberty.h
+xexit.o: config.h $(INCDIR)/libiberty.h
+xmalloc.o: config.h $(INCDIR)/libiberty.h
+xmemdup.o: config.h $(INCDIR)/libiberty.h
+xstrdup.o: config.h $(INCDIR)/libiberty.h
xstrerror.o: config.h $(INCDIR)/libiberty.h
+waitpid.o: config.h
+hashtab.o: config.h $(INCDIR)/libiberty.h $(INCDIR)/hashtab.h $(INCDIR)/ansidecl.h
OSDN Git Service
