host_triplet = @host@
target_triplet = @target@
subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/../config.guess \
- $(srcdir)/../config.sub $(srcdir)/../depcomp \
- $(srcdir)/../install-sh $(srcdir)/../ltmain.sh \
- $(srcdir)/../missing $(srcdir)/../mkinstalldirs \
- $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/config.h.in $(top_srcdir)/configure
+DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/configure $(am__configure_deps) \
+ $(srcdir)/config.h.in $(srcdir)/../mkinstalldirs \
+ $(srcdir)/../depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
libgo_la_DEPENDENCIES = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1) \
$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
$(am__DEPENDENCIES_1)
-am__libgo_la_SOURCES_DIST = runtime/go-append.c runtime/go-assert.c \
- runtime/go-assert-interface.c \
- runtime/go-byte-array-to-string.c runtime/go-breakpoint.c \
- runtime/go-caller.c runtime/go-callers.c \
- runtime/go-can-convert-interface.c runtime/go-cgo.c \
- runtime/go-check-interface.c runtime/go-construct-map.c \
- runtime/go-convert-interface.c runtime/go-copy.c \
- runtime/go-defer.c runtime/go-deferred-recover.c \
- runtime/go-eface-compare.c runtime/go-eface-val-compare.c \
- runtime/go-getgoroot.c runtime/go-int-array-to-string.c \
- runtime/go-int-to-string.c runtime/go-interface-compare.c \
- runtime/go-interface-eface-compare.c \
- runtime/go-interface-val-compare.c runtime/go-make-slice.c \
- runtime/go-map-delete.c runtime/go-map-index.c \
- runtime/go-map-len.c runtime/go-map-range.c \
- runtime/go-matherr.c runtime/go-nanotime.c runtime/go-now.c \
- runtime/go-new-map.c runtime/go-new.c runtime/go-nosys.c \
- runtime/go-panic.c runtime/go-print.c runtime/go-recover.c \
- runtime/go-reflect-call.c runtime/go-reflect-map.c \
- runtime/go-rune.c runtime/go-runtime-error.c \
- runtime/go-setenv.c runtime/go-signal.c runtime/go-strcmp.c \
- runtime/go-string-to-byte-array.c \
- runtime/go-string-to-int-array.c runtime/go-strplus.c \
- runtime/go-strslice.c runtime/go-traceback.c \
- runtime/go-trampoline.c runtime/go-type-complex.c \
- runtime/go-type-eface.c runtime/go-type-error.c \
- runtime/go-type-float.c runtime/go-type-identity.c \
- runtime/go-type-interface.c runtime/go-type-string.c \
- runtime/go-typedesc-equal.c runtime/go-typestring.c \
- runtime/go-unsafe-new.c runtime/go-unsafe-newarray.c \
- runtime/go-unsafe-pointer.c runtime/go-unwind.c runtime/chan.c \
- runtime/cpuprof.c runtime/lock_sema.c runtime/thread-sema.c \
- runtime/lock_futex.c runtime/thread-linux.c runtime/mcache.c \
- runtime/mcentral.c runtime/mem_posix_memalign.c runtime/mem.c \
- runtime/mfinal.c runtime/mfixalloc.c runtime/mgc0.c \
- runtime/mheap.c runtime/msize.c runtime/print.c runtime/proc.c \
- runtime/runtime.c runtime/signal_unix.c runtime/thread.c \
- runtime/yield.c runtime/rtems-task-variable-add.c iface.c \
- malloc.c map.c mprof.c reflect.c runtime1.c sema.c sigqueue.c \
- string.c time.c
@LIBGO_IS_LINUX_FALSE@am__objects_1 = lock_sema.lo thread-sema.lo
@LIBGO_IS_LINUX_TRUE@am__objects_1 = lock_futex.lo thread-linux.lo
@HAVE_SYS_MMAN_H_FALSE@am__objects_2 = mem_posix_memalign.lo
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
SOURCES = $(libgobegin_a_SOURCES) $(libgo_la_SOURCES)
-DIST_SOURCES = $(libgobegin_a_SOURCES) $(am__libgo_la_SOURCES_DIST)
MULTISRCTOP =
MULTIBUILDTOP =
MULTIDIRS =
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
- distdir dist dist-all distcheck
+ $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = testsuite
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- { test ! -d "$(distdir)" \
- || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr "$(distdir)"; }; }
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
go/net/lookup_unix.go \
go/net/mac.go \
go/net/net.go \
+ go/net/net_posix.go \
go/net/parse.go \
go/net/pipe.go \
go/net/port.go \
unicode/utf8.lo
libgo_la_SOURCES = $(runtime_files)
-libgo_la_LDFLAGS = $(PTHREAD_CFLAGS) $(AM_LDFLAGS)
+libgo_la_LDFLAGS = \
+ -version-info $(libtool_VERSION) $(PTHREAD_CFLAGS) $(AM_LDFLAGS)
+
libgo_la_LIBADD = \
$(libgo_go_objs) $(LIBFFI) $(PTHREAD_LIBS) $(MATH_LIBS) $(NET_LIBS)
# Check a package.
CHECK = \
- GC="$(GOC) $(GOCFLAGS) -L `${PWD_COMMAND}` -L `${PWD_COMMAND}`/.libs"; \
+ GC="$(GOC) $(GOCFLAGS) $($(subst /,_,$@)_GOCFLAGS) -L `${PWD_COMMAND}` -L `${PWD_COMMAND}`/.libs"; \
export GC; \
GOLIBS="$(MATH_LIBS) $(NET_LIBS)"; \
export GOLIBS; \
$(toolexeclibgotexttemplate_DATA) \
$(toolexeclibgounicode_DATA)
+# At least for now, we need -static-libgo for this test, because
+# otherwise we can't get the line numbers.
+runtime_pprof_check_GOCFLAGS = -static-libgo
# How to build a .gox file from a .lo file.
BUILDGOX = \
os/user/check \
path/filepath/check \
regexp/syntax/check \
+ runtime/pprof/check \
sync/atomic/check \
text/scanner/check \
text/tabwriter/check \
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- test -d "$(distdir)" || mkdir "$(distdir)"
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
- -test -n "$(am__skip_mode_fix)" \
- || find "$(distdir)" -type d ! -perm -755 \
- -exec chmod u+rwx,go+rx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r "$(distdir)"
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-lzma: distdir
- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
- $(am__remove_distdir)
-
-dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lzma*) \
- lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
- *.tar.xz*) \
- xz -dc $(distdir).tar.xz | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- test -d $(distdir)/_build || exit 0; \
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
- && cd "$$am__cwd" \
- || exit 1
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
- @$(am__cd) '$(distuninstallcheck_dir)' \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) all-multi $(DATA) \
all all-am all-multi am--refresh check check-am clean \
clean-generic clean-libtool clean-local clean-multi \
clean-toolexeclibLIBRARIES clean-toolexeclibLTLIBRARIES ctags \
- ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-lzma \
- dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
- distclean-compile distclean-generic distclean-hdr \
- distclean-libtool distclean-multi distclean-tags \
- distcleancheck distdir distuninstallcheck dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-multi install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- install-toolexeclibLIBRARIES install-toolexeclibLTLIBRARIES \
- install-toolexeclibgoDATA install-toolexeclibgoarchiveDATA \
+ ctags-recursive distclean distclean-compile distclean-generic \
+ distclean-hdr distclean-libtool distclean-multi distclean-tags \
+ dvi dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-multi \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip install-toolexeclibLIBRARIES \
+ install-toolexeclibLTLIBRARIES install-toolexeclibgoDATA \
+ install-toolexeclibgoarchiveDATA \
install-toolexeclibgocompressDATA \
install-toolexeclibgocontainerDATA \
install-toolexeclibgocryptoDATA \
OSDN Git Service
