OSDN Git Service

PR 43839
[pf3gnuchains/gcc-fork.git] / libgfortran / io / io.h
index ec37be3..acbec77 100644 (file)
@@ -1,4 +1,4 @@
-/* Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007, 2008
+/* Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
    Free Software Foundation, Inc.
    Contributed by Andy Vaught
    F2003 I/O support contributed by Jerry DeLisle
@@ -7,7 +7,7 @@ This file is part of the GNU Fortran 95 runtime library (libgfortran).
 
 Libgfortran is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
+the Free Software Foundation; either version 3, or (at your option)
 any later version.
 
 Libgfortran is distributed in the hope that it will be useful,
@@ -15,17 +15,14 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
 
-You should have received a copy of the GNU General Public License
-along with Libgfortran; see the file COPYING.  If not, write to
-the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-Boston, MA 02110-1301, USA.  */
+Under Section 7 of GPL version 3, you are granted additional
+permissions described in the GCC Runtime Library Exception, version
+3.1, as published by the Free Software Foundation.
 
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.  */
+You should have received a copy of the GNU General Public License and
+a copy of the GCC Runtime Library Exception along with this program;
+see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+<http://www.gnu.org/licenses/>.  */
 
 #ifndef GFOR_IO_H
 #define GFOR_IO_H
@@ -45,38 +42,14 @@ typedef enum
 }
 bt;
 
+/* Forward declarations.  */
 struct st_parameter_dt;
+typedef struct stream stream;
+struct fbuf;
+struct format_data;
+typedef struct fnode fnode;
+struct gfc_unit;
 
-typedef struct stream
-{
-  char *(*alloc_w_at) (struct stream *, int *);
-  try (*sfree) (struct stream *);
-  try (*close) (struct stream *);
-  try (*seek) (struct stream *, gfc_offset);
-  try (*trunc) (struct stream *);
-  int (*read) (struct stream *, void *, size_t *);
-  int (*write) (struct stream *, const void *, size_t *);
-  try (*set) (struct stream *, int, size_t);
-}
-stream;
-
-typedef enum
-{ SYNC_BUFFERED, SYNC_UNBUFFERED, ASYNC }
-io_mode;
-
-/* Macros for doing file I/O given a stream.  */
-
-#define sfree(s) ((s)->sfree)(s)
-#define sclose(s) ((s)->close)(s)
-
-#define salloc_w(s, len) ((s)->alloc_w_at)(s, len)
-
-#define sseek(s, pos) ((s)->seek)(s, pos)
-#define struncate(s) ((s)->trunc)(s)
-#define sread(s, buf, nbytes) ((s)->read)(s, buf, nbytes)
-#define swrite(s, buf, nbytes) ((s)->write)(s, buf, nbytes)
-
-#define sset(s, c, n) ((s)->set)(s, c, n)
 
 /* Macros for testing what kinds of I/O we are doing.  */
 
@@ -106,6 +79,18 @@ typedef struct array_loop_spec
 }
 array_loop_spec;
 
+/* A stucture to build a hash table for format data.  */
+
+#define FORMAT_HASH_SIZE 16
+
+typedef struct format_hash_entry
+{
+  char *key;
+  gfc_charlen_type key_len;
+  struct format_data *hashed_fmt;
+}
+format_hash_entry;
+
 /* Representation of a namelist object in libgfortran
 
    Namelist Records
@@ -127,9 +112,8 @@ array_loop_spec;
 
 typedef struct namelist_type
 {
-
   /* Object type, stored as GFC_DTYPE_xxxx.  */
-  bt type;
+  dtype type;
 
   /* Object name.  */
   char * var_name;
@@ -263,6 +247,7 @@ typedef struct
   CHARACTER2 (round);
   CHARACTER1 (sign);
   CHARACTER2 (asynchronous);
+  GFC_INTEGER_4 *newunit;
 }
 st_parameter_open;
 
@@ -310,9 +295,9 @@ st_parameter_filepos;
 #define IOPARM_INQUIRE_HAS_ASYNCHRONOUS        (1 << 0)
 #define IOPARM_INQUIRE_HAS_DECIMAL     (1 << 1)
 #define IOPARM_INQUIRE_HAS_ENCODING    (1 << 2)
-#define IOPARM_INQUIRE_HAS_PENDING     (1 << 3)
-#define IOPARM_INQUIRE_HAS_ROUND       (1 << 4)
-#define IOPARM_INQUIRE_HAS_SIGN                (1 << 5)
+#define IOPARM_INQUIRE_HAS_ROUND       (1 << 3)
+#define IOPARM_INQUIRE_HAS_SIGN                (1 << 4)
+#define IOPARM_INQUIRE_HAS_PENDING     (1 << 5)
 #define IOPARM_INQUIRE_HAS_SIZE                (1 << 6)
 #define IOPARM_INQUIRE_HAS_ID          (1 << 7)
 
@@ -343,16 +328,14 @@ typedef struct
   CHARACTER1 (asynchronous);
   CHARACTER2 (decimal);
   CHARACTER1 (encoding);
-  CHARACTER2 (pending);
-  CHARACTER1 (round);
-  CHARACTER2 (sign);
-  GFC_INTEGER_4 *size;
+  CHARACTER2 (round);
+  CHARACTER1 (sign);
+  GFC_INTEGER_4 *pending;
+  GFC_IO_INT *size;
   GFC_INTEGER_4 *id;
 }
 st_parameter_inquire;
 
-struct gfc_unit;
-struct format_data;
 
 #define IOPARM_DT_LIST_FORMAT                  (1 << 7)
 #define IOPARM_DT_NAMELIST_READ_MODE           (1 << 8)
@@ -377,172 +360,6 @@ struct format_data;
 #define IOPARM_DT_IONML_SET                    (1 << 31)
 
 
-typedef struct st_parameter_43
-{
-  void (*transfer) (struct st_parameter_dt *, bt, void *, int,
-                   size_t, size_t);
-  struct gfc_unit *current_unit;
-  /* Item number in a formatted data transfer.  Also used in namelist
-     read_logical as an index into line_buffer.  */
-  int item_count;
-  unit_mode mode;
-  unit_blank blank_status;
-  unit_sign sign_status;
-  int scale_factor;
-  int max_pos; /* Maximum righthand column written to.  */
-  /* Number of skips + spaces to be done for T and X-editing.  */
-  int skips;
-  /* Number of spaces to be done for T and X-editing.  */
-  int pending_spaces;
-  /* Whether an EOR condition was encountered. Value is:
-       0 if no EOR was encountered
-       1 if an EOR was encountered due to a 1-byte marker (LF)
-       2 if an EOR was encountered due to a 2-bytes marker (CRLF) */
-  int sf_seen_eor;
-  unit_advance advance_status;
-  unsigned reversion_flag : 1; /* Format reversion has occurred.  */
-  unsigned first_item : 1;
-  unsigned seen_dollar : 1;
-  unsigned eor_condition : 1;
-  unsigned no_leading_blank : 1;
-  unsigned char_flag : 1;
-  unsigned input_complete : 1;
-  unsigned at_eol : 1;
-  unsigned comma_flag : 1;
-  /* A namelist specific flag used in the list directed library
-     to flag that calls are being made from namelist read (eg. to
-     ignore comments or to treat '/' as a terminator)  */
-  unsigned namelist_mode : 1;
-  /* A namelist specific flag used in the list directed library
-     to flag read errors and return, so that an attempt can be
-     made to read a new object name.  */
-  unsigned nml_read_error : 1;
-  /* A sequential formatted read specific flag used to signal that a
-     character string is being read so don't use commas to shorten a
-     formatted field width.  */
-  unsigned sf_read_comma : 1;
-  /* A namelist specific flag used to enable reading input from 
-     line_buffer for logical reads.  */
-  unsigned line_buffer_enabled : 1;
-  /* An internal unit specific flag used to identify that the associated
-     unit is internal.  */
-  unsigned unit_is_internal : 1;
-  /* An internal unit specific flag to signify an EOF condition for list
-     directed read.  */
-  unsigned at_eof : 1;
-  /* 16 unused bits.  */
-
-  char last_char;
-  char nml_delim;
-
-  int repeat_count;
-  int saved_length;
-  int saved_used;
-  bt saved_type;
-  char *saved_string;
-  char *scratch;
-  char *line_buffer;
-  struct format_data *fmt;
-  jmp_buf *eof_jump;
-  namelist_info *ionml;
-  /* A flag used to identify when a non-standard expanded namelist read
-     has occurred.  */
-  int expanded_read;
-  /* Storage area for values except for strings.  Must be large
-     enough to hold a complex value (two reals) of the largest
-     kind.  */
-  char value[32];
-  gfc_offset size_used;
-} st_parameter_43;
-
-
-typedef struct st_parameter_44
-{
-  GFC_INTEGER_4 *id;
-  GFC_IO_INT pos;
-  CHARACTER1 (asynchronous);
-  CHARACTER2 (blank);
-  CHARACTER1 (decimal);
-  CHARACTER2 (delim);
-  CHARACTER1 (pad);
-  CHARACTER2 (round);
-  CHARACTER1 (sign);
-  void (*transfer) (struct st_parameter_dt *, bt, void *, int,
-                   size_t, size_t);
-  struct gfc_unit *current_unit;
-  /* Item number in a formatted data transfer.  Also used in namelist
-     read_logical as an index into line_buffer.  */
-  int item_count;
-  unit_mode mode;
-  unit_blank blank_status;
-  unit_sign sign_status;
-  int scale_factor;
-  int max_pos; /* Maximum righthand column written to.  */
-  /* Number of skips + spaces to be done for T and X-editing.  */
-  int skips;
-  /* Number of spaces to be done for T and X-editing.  */
-  int pending_spaces;
-  /* Whether an EOR condition was encountered. Value is:
-       0 if no EOR was encountered
-       1 if an EOR was encountered due to a 1-byte marker (LF)
-       2 if an EOR was encountered due to a 2-bytes marker (CRLF) */
-  int sf_seen_eor;
-  unit_advance advance_status;
-  unsigned reversion_flag : 1; /* Format reversion has occurred.  */
-  unsigned first_item : 1;
-  unsigned seen_dollar : 1;
-  unsigned eor_condition : 1;
-  unsigned no_leading_blank : 1;
-  unsigned char_flag : 1;
-  unsigned input_complete : 1;
-  unsigned at_eol : 1;
-  unsigned comma_flag : 1;
-  /* A namelist specific flag used in the list directed library
-     to flag that calls are being made from namelist read (eg. to
-     ignore comments or to treat '/' as a terminator)  */
-  unsigned namelist_mode : 1;
-  /* A namelist specific flag used in the list directed library
-     to flag read errors and return, so that an attempt can be
-     made to read a new object name.  */
-  unsigned nml_read_error : 1;
-  /* A sequential formatted read specific flag used to signal that a
-     character string is being read so don't use commas to shorten a
-     formatted field width.  */
-  unsigned sf_read_comma : 1;
-  /* A namelist specific flag used to enable reading input from 
-     line_buffer for logical reads.  */
-  unsigned line_buffer_enabled : 1;
-  /* An internal unit specific flag used to identify that the associated
-     unit is internal.  */
-  unsigned unit_is_internal : 1;
-  /* An internal unit specific flag to signify an EOF condition for list
-     directed read.  */
-  unsigned at_eof : 1;
-  /* 16 unused bits.  */
-
-  char last_char;
-  char nml_delim;
-
-  int repeat_count;
-  int saved_length;
-  int saved_used;
-  bt saved_type;
-  char *saved_string;
-  char *scratch;
-  char *line_buffer;
-  struct format_data *fmt;
-  jmp_buf *eof_jump;
-  namelist_info *ionml;
-  /* A flag used to identify when a non-standard expanded namelist read
-     has occurred.  */
-  int expanded_read;
-  /* Storage area for values except for strings.  Must be large
-     enough to hold a complex value (two reals) of the largest
-     kind.  */
-  char value[32];
-  gfc_offset size_used;
-} st_parameter_44;
-
 typedef struct st_parameter_dt
 {
   st_parameter_common common;
@@ -557,13 +374,101 @@ typedef struct st_parameter_dt
      to reserve enough space.  */
   union
     {
-      st_parameter_43 q;
-      st_parameter_44 p;
+      struct
+       {
+         void (*transfer) (struct st_parameter_dt *, bt, void *, int,
+                           size_t, size_t);
+         struct gfc_unit *current_unit;
+         /* Item number in a formatted data transfer.  Also used in namelist
+            read_logical as an index into line_buffer.  */
+         int item_count;
+         unit_mode mode;
+         unit_blank blank_status;
+         unit_sign sign_status;
+         int scale_factor;
+         int max_pos; /* Maximum righthand column written to.  */
+         /* Number of skips + spaces to be done for T and X-editing.  */
+         int skips;
+         /* Number of spaces to be done for T and X-editing.  */
+         int pending_spaces;
+         /* Whether an EOR condition was encountered. Value is:
+              0 if no EOR was encountered
+              1 if an EOR was encountered due to a 1-byte marker (LF)
+              2 if an EOR was encountered due to a 2-bytes marker (CRLF) */
+         int sf_seen_eor;
+         unit_advance advance_status;
+         unsigned reversion_flag : 1; /* Format reversion has occurred.  */
+         unsigned first_item : 1;
+         unsigned seen_dollar : 1;
+         unsigned eor_condition : 1;
+         unsigned no_leading_blank : 1;
+         unsigned char_flag : 1;
+         unsigned input_complete : 1;
+         unsigned at_eol : 1;
+         unsigned comma_flag : 1;
+         /* A namelist specific flag used in the list directed library
+            to flag that calls are being made from namelist read (eg. to
+            ignore comments or to treat '/' as a terminator)  */
+         unsigned namelist_mode : 1;
+         /* A namelist specific flag used in the list directed library
+            to flag read errors and return, so that an attempt can be
+            made to read a new object name.  */
+         unsigned nml_read_error : 1;
+         /* A sequential formatted read specific flag used to signal that a
+            character string is being read so don't use commas to shorten a
+            formatted field width.  */
+         unsigned sf_read_comma : 1;
+         /* A namelist specific flag used to enable reading input from 
+            line_buffer for logical reads.  */
+         unsigned line_buffer_enabled : 1;
+         /* An internal unit specific flag used to identify that the associated
+            unit is internal.  */
+         unsigned unit_is_internal : 1;
+         /* An internal unit specific flag to signify an EOF condition for list
+            directed read.  */
+         unsigned at_eof : 1;
+         /* Used for g0 floating point output.  */
+         unsigned g0_no_blanks : 1;
+         /* Used to signal use of free_format_data.  */
+         unsigned format_not_saved : 1;
+         /* 14 unused bits.  */
+
+         char last_char;
+         char nml_delim;
+
+         int repeat_count;
+         int saved_length;
+         int saved_used;
+         bt saved_type;
+         char *saved_string;
+         char *scratch;
+         char *line_buffer;
+         struct format_data *fmt;
+         jmp_buf *eof_jump;
+         namelist_info *ionml;
+         /* A flag used to identify when a non-standard expanded namelist read
+            has occurred.  */
+         int expanded_read;
+         /* Storage area for values except for strings.  Must be
+            large enough to hold a complex value (two reals) of the
+            largest kind.  */
+         char value[32];
+         GFC_IO_INT size_used;
+       } p;
       /* This pad size must be equal to the pad_size declared in
         trans-io.c (gfc_build_io_library_fndecls).  The above structure
         must be smaller or equal to this array.  */
-      char pad[32 * sizeof (char *) + 32 * sizeof (int)];
+      char pad[16 * sizeof (char *) + 32 * sizeof (int)];
     } u;
+  GFC_INTEGER_4 *id;
+  GFC_IO_INT pos;
+  CHARACTER1 (asynchronous);
+  CHARACTER2 (blank);
+  CHARACTER1 (decimal);
+  CHARACTER2 (delim);
+  CHARACTER1 (pad);
+  CHARACTER2 (round);
+  CHARACTER1 (sign);
 }
 st_parameter_dt;
 
@@ -607,25 +512,6 @@ typedef struct
 unit_flags;
 
 
-/* Formatting buffer. This is a temporary scratch buffer. Currently used only
-   by formatted writes. After every
-   formatted write statement, this buffer is flushed. This buffer is needed since
-   not all devices are seekable, and T or TL edit descriptors require 
-   moving backwards in the record.  However, advance='no' complicates the
-   situation, so the buffer must only be partially flushed from the end of the
-   last flush until the current position in the record. */
-
-typedef struct fbuf
-{
-  char *buf;                   /* Start of buffer.  */
-  size_t len;                  /* Length of buffer.  */
-  size_t act;                  /* Active bytes in buffer.  */
-  size_t flushed;              /* Flushed bytes from beginning of buffer.  */
-  size_t pos;                  /* Current position in buffer.  */
-}
-fbuf;
-
-
 typedef struct gfc_unit
 {
   int unit_number;
@@ -646,6 +532,7 @@ typedef struct gfc_unit
   unit_pad pad_status;
   unit_decimal decimal_status;
   unit_delim delim_status;
+  unit_round round_status;
 
   /* recl                 -- Record length of the file.
      last_record          -- Last record number read or written
@@ -679,173 +566,15 @@ typedef struct gfc_unit
 
   int file_len;
   char *file;
+
+  /* The format hash table.  */
+  struct format_hash_entry format_hash_table[FORMAT_HASH_SIZE];
   
   /* Formatting buffer.  */
   struct fbuf *fbuf;
 }
 gfc_unit;
 
-/* Format tokens.  Only about half of these can be stored in the
-   format nodes.  */
-
-typedef enum
-{
-  FMT_NONE = 0, FMT_UNKNOWN, FMT_SIGNED_INT, FMT_ZERO, FMT_POSINT, FMT_PERIOD,
-  FMT_COMMA, FMT_COLON, FMT_SLASH, FMT_DOLLAR, FMT_T, FMT_TR, FMT_TL,
-  FMT_LPAREN, FMT_RPAREN, FMT_X, FMT_S, FMT_SS, FMT_SP, FMT_STRING,
-  FMT_BADSTRING, FMT_P, FMT_I, FMT_B, FMT_BN, FMT_BZ, FMT_O, FMT_Z, FMT_F,
-  FMT_E, FMT_EN, FMT_ES, FMT_G, FMT_L, FMT_A, FMT_D, FMT_H, FMT_END, FMT_DC,
-  FMT_DP
-}
-format_token;
-
-
-/* Format nodes.  A format string is converted into a tree of these
-   structures, which is traversed as part of a data transfer statement.  */
-
-typedef struct fnode
-{
-  format_token format;
-  int repeat;
-  struct fnode *next;
-  char *source;
-
-  union
-  {
-    struct
-    {
-      int w, d, e;
-    }
-    real;
-
-    struct
-    {
-      int length;
-      char *p;
-    }
-    string;
-
-    struct
-    {
-      int w, m;
-    }
-    integer;
-
-    int w;
-    int k;
-    int r;
-    int n;
-
-    struct fnode *child;
-  }
-  u;
-
-  /* Members for traversing the tree during data transfer.  */
-
-  int count;
-  struct fnode *current;
-
-}
-fnode;
-
-
-/* unix.c */
-
-extern int move_pos_offset (stream *, int);
-internal_proto(move_pos_offset);
-
-extern int compare_files (stream *, stream *);
-internal_proto(compare_files);
-
-extern stream *open_external (st_parameter_open *, unit_flags *);
-internal_proto(open_external);
-
-extern stream *open_internal (char *, int, gfc_offset);
-internal_proto(open_internal);
-
-extern stream *input_stream (void);
-internal_proto(input_stream);
-
-extern stream *output_stream (void);
-internal_proto(output_stream);
-
-extern stream *error_stream (void);
-internal_proto(error_stream);
-
-extern int compare_file_filename (gfc_unit *, const char *, int);
-internal_proto(compare_file_filename);
-
-extern gfc_unit *find_file (const char *file, gfc_charlen_type file_len);
-internal_proto(find_file);
-
-extern int stream_at_bof (stream *);
-internal_proto(stream_at_bof);
-
-extern int stream_at_eof (stream *);
-internal_proto(stream_at_eof);
-
-extern int delete_file (gfc_unit *);
-internal_proto(delete_file);
-
-extern int file_exists (const char *file, gfc_charlen_type file_len);
-internal_proto(file_exists);
-
-extern const char *inquire_sequential (const char *, int);
-internal_proto(inquire_sequential);
-
-extern const char *inquire_direct (const char *, int);
-internal_proto(inquire_direct);
-
-extern const char *inquire_formatted (const char *, int);
-internal_proto(inquire_formatted);
-
-extern const char *inquire_unformatted (const char *, int);
-internal_proto(inquire_unformatted);
-
-extern const char *inquire_read (const char *, int);
-internal_proto(inquire_read);
-
-extern const char *inquire_write (const char *, int);
-internal_proto(inquire_write);
-
-extern const char *inquire_readwrite (const char *, int);
-internal_proto(inquire_readwrite);
-
-extern gfc_offset file_length (stream *);
-internal_proto(file_length);
-
-extern gfc_offset file_position (stream *);
-internal_proto(file_position);
-
-extern int is_seekable (stream *);
-internal_proto(is_seekable);
-
-extern int is_special (stream *);
-internal_proto(is_special);
-
-extern int is_preconnected (stream *);
-internal_proto(is_preconnected);
-
-extern void flush_if_preconnected (stream *);
-internal_proto(flush_if_preconnected);
-
-extern void empty_internal_buffer(stream *);
-internal_proto(empty_internal_buffer);
-
-extern try flush (stream *);
-internal_proto(flush);
-
-extern int stream_isatty (stream *);
-internal_proto(stream_isatty);
-
-extern char * stream_ttyname (stream *);
-internal_proto(stream_ttyname);
-
-extern gfc_offset stream_offset (stream *s);
-internal_proto(stream_offset);
-
-extern int unpack_filename (char *, const char *, int);
-internal_proto(unpack_filename);
 
 /* unit.c */
 
@@ -853,6 +582,10 @@ internal_proto(unpack_filename);
 extern gfc_offset max_offset;
 internal_proto(max_offset);
 
+/* Unit number to be assigned when NEWUNIT is used in an OPEN statement.  */
+extern GFC_INTEGER_4 next_available_newunit;
+internal_proto(next_available_newunit);
+
 /* Unit tree root.  */
 extern gfc_unit *unit_root;
 internal_proto(unit_root);
@@ -887,27 +620,17 @@ internal_proto(update_position);
 extern void finish_last_advance_record (gfc_unit *u);
 internal_proto (finish_last_advance_record);
 
+extern int unit_truncate (gfc_unit *, gfc_offset, st_parameter_common *);
+internal_proto (unit_truncate);
+
+extern GFC_INTEGER_4 get_unique_unit_number (st_parameter_open *);
+internal_proto(get_unique_unit_number);
+
 /* open.c */
 
 extern gfc_unit *new_unit (st_parameter_open *, gfc_unit *, unit_flags *);
 internal_proto(new_unit);
 
-/* format.c */
-
-extern void parse_format (st_parameter_dt *);
-internal_proto(parse_format);
-
-extern const fnode *next_format (st_parameter_dt *);
-internal_proto(next_format);
-
-extern void unget_format (st_parameter_dt *, const fnode *);
-internal_proto(unget_format);
-
-extern void format_error (st_parameter_dt *, const fnode *, const char *);
-internal_proto(format_error);
-
-extern void free_format_data (st_parameter_dt *);
-internal_proto(free_format_data);
 
 /* transfer.c */
 
@@ -916,12 +639,9 @@ internal_proto(free_format_data);
 extern const char *type_name (bt);
 internal_proto(type_name);
 
-extern try read_block_form (st_parameter_dt *, void *, size_t *);
+extern void * read_block_form (st_parameter_dt *, int *);
 internal_proto(read_block_form);
 
-extern char *read_sf (st_parameter_dt *, int *, int);
-internal_proto(read_sf);
-
 extern void *write_block (st_parameter_dt *, int);
 internal_proto(write_block);
 
@@ -942,6 +662,9 @@ internal_proto (reverse_memcpy);
 extern void st_wait (st_parameter_wait *);
 export_proto(st_wait);
 
+extern void hit_eof (st_parameter_dt *);
+internal_proto(hit_eof);
+
 /* read.c */
 
 extern void set_integer (void *, GFC_INTEGER_LARGEST, int);
@@ -1047,24 +770,6 @@ internal_proto(size_from_real_kind);
 extern size_t size_from_complex_kind (int);
 internal_proto(size_from_complex_kind);
 
-/* fbuf.c */
-extern void fbuf_init (gfc_unit *, size_t);
-internal_proto(fbuf_init);
-
-extern void fbuf_destroy (gfc_unit *);
-internal_proto(fbuf_destroy);
-
-extern void fbuf_reset (gfc_unit *);
-internal_proto(fbuf_reset);
-
-extern char * fbuf_alloc (gfc_unit *, size_t);
-internal_proto(fbuf_alloc);
-
-extern int fbuf_flush (gfc_unit *, int);
-internal_proto(fbuf_flush);
-
-extern int fbuf_seek (gfc_unit *, gfc_offset);
-internal_proto(fbuf_seek);
 
 /* lock.c */
 extern void free_ionml (st_parameter_dt *);