{ ASYNC_YES, ASYNC_NO, ASYNC_UNSPECIFIED }
unit_async;
+typedef enum
+{ SIGN_S, SIGN_SS, SIGN_SP }
+unit_sign_s;
+
#define CHARACTER1(name) \
char * name; \
gfc_charlen_type name ## _len
#define IOPARM_DT_HAS_PAD (1 << 22)
#define IOPARM_DT_HAS_ROUND (1 << 23)
#define IOPARM_DT_HAS_SIGN (1 << 24)
+#define IOPARM_DT_HAS_F2003 (1 << 25)
/* Internal use bit. */
#define IOPARM_DT_IONML_SET (1 << 31)
-typedef struct st_parameter_dt
+
+typedef struct st_parameter_43
+{
+ void (*transfer) (struct st_parameter_dt *, bt, void *, int,
+ size_t, size_t);
+ struct gfc_unit *current_unit;
+ /* Item number in a formatted data transfer. Also used in namelist
+ read_logical as an index into line_buffer. */
+ int item_count;
+ unit_mode mode;
+ unit_blank blank_status;
+ unit_sign sign_status;
+ int scale_factor;
+ int max_pos; /* Maximum righthand column written to. */
+ /* Number of skips + spaces to be done for T and X-editing. */
+ int skips;
+ /* Number of spaces to be done for T and X-editing. */
+ int pending_spaces;
+ /* Whether an EOR condition was encountered. Value is:
+ 0 if no EOR was encountered
+ 1 if an EOR was encountered due to a 1-byte marker (LF)
+ 2 if an EOR was encountered due to a 2-bytes marker (CRLF) */
+ int sf_seen_eor;
+ unit_advance advance_status;
+ unsigned reversion_flag : 1; /* Format reversion has occurred. */
+ unsigned first_item : 1;
+ unsigned seen_dollar : 1;
+ unsigned eor_condition : 1;
+ unsigned no_leading_blank : 1;
+ unsigned char_flag : 1;
+ unsigned input_complete : 1;
+ unsigned at_eol : 1;
+ unsigned comma_flag : 1;
+ /* A namelist specific flag used in the list directed library
+ to flag that calls are being made from namelist read (eg. to
+ ignore comments or to treat '/' as a terminator) */
+ unsigned namelist_mode : 1;
+ /* A namelist specific flag used in the list directed library
+ to flag read errors and return, so that an attempt can be
+ made to read a new object name. */
+ unsigned nml_read_error : 1;
+ /* A sequential formatted read specific flag used to signal that a
+ character string is being read so don't use commas to shorten a
+ formatted field width. */
+ unsigned sf_read_comma : 1;
+ /* A namelist specific flag used to enable reading input from
+ line_buffer for logical reads. */
+ unsigned line_buffer_enabled : 1;
+ /* An internal unit specific flag used to identify that the associated
+ unit is internal. */
+ unsigned unit_is_internal : 1;
+ /* An internal unit specific flag to signify an EOF condition for list
+ directed read. */
+ unsigned at_eof : 1;
+ /* 16 unused bits. */
+
+ char last_char;
+ char nml_delim;
+
+ int repeat_count;
+ int saved_length;
+ int saved_used;
+ bt saved_type;
+ char *saved_string;
+ char *scratch;
+ char *line_buffer;
+ struct format_data *fmt;
+ jmp_buf *eof_jump;
+ namelist_info *ionml;
+ /* A flag used to identify when a non-standard expanded namelist read
+ has occurred. */
+ int expanded_read;
+ /* Storage area for values except for strings. Must be large
+ enough to hold a complex value (two reals) of the largest
+ kind. */
+ char value[32];
+ gfc_offset size_used;
+} st_parameter_43;
+
+
+typedef struct st_parameter_44
{
- st_parameter_common common;
- GFC_IO_INT rec;
- GFC_IO_INT *size, *iolength;
- gfc_array_char *internal_unit_desc;
- CHARACTER1 (format);
- CHARACTER2 (advance);
- CHARACTER1 (internal_unit);
- CHARACTER2 (namelist_name);
GFC_IO_INT *id;
GFC_IO_INT pos;
CHARACTER1 (asynchronous);
CHARACTER1 (pad);
CHARACTER2 (round);
CHARACTER1 (sign);
+ void (*transfer) (struct st_parameter_dt *, bt, void *, int,
+ size_t, size_t);
+ struct gfc_unit *current_unit;
+ /* Item number in a formatted data transfer. Also used in namelist
+ read_logical as an index into line_buffer. */
+ int item_count;
+ unit_mode mode;
+ unit_blank blank_status;
+ unit_sign sign_status;
+ int scale_factor;
+ int max_pos; /* Maximum righthand column written to. */
+ /* Number of skips + spaces to be done for T and X-editing. */
+ int skips;
+ /* Number of spaces to be done for T and X-editing. */
+ int pending_spaces;
+ /* Whether an EOR condition was encountered. Value is:
+ 0 if no EOR was encountered
+ 1 if an EOR was encountered due to a 1-byte marker (LF)
+ 2 if an EOR was encountered due to a 2-bytes marker (CRLF) */
+ int sf_seen_eor;
+ unit_advance advance_status;
+ unsigned reversion_flag : 1; /* Format reversion has occurred. */
+ unsigned first_item : 1;
+ unsigned seen_dollar : 1;
+ unsigned eor_condition : 1;
+ unsigned no_leading_blank : 1;
+ unsigned char_flag : 1;
+ unsigned input_complete : 1;
+ unsigned at_eol : 1;
+ unsigned comma_flag : 1;
+ /* A namelist specific flag used in the list directed library
+ to flag that calls are being made from namelist read (eg. to
+ ignore comments or to treat '/' as a terminator) */
+ unsigned namelist_mode : 1;
+ /* A namelist specific flag used in the list directed library
+ to flag read errors and return, so that an attempt can be
+ made to read a new object name. */
+ unsigned nml_read_error : 1;
+ /* A sequential formatted read specific flag used to signal that a
+ character string is being read so don't use commas to shorten a
+ formatted field width. */
+ unsigned sf_read_comma : 1;
+ /* A namelist specific flag used to enable reading input from
+ line_buffer for logical reads. */
+ unsigned line_buffer_enabled : 1;
+ /* An internal unit specific flag used to identify that the associated
+ unit is internal. */
+ unsigned unit_is_internal : 1;
+ /* An internal unit specific flag to signify an EOF condition for list
+ directed read. */
+ unsigned at_eof : 1;
+ /* 16 unused bits. */
+
+ char last_char;
+ char nml_delim;
+
+ int repeat_count;
+ int saved_length;
+ int saved_used;
+ bt saved_type;
+ char *saved_string;
+ char *scratch;
+ char *line_buffer;
+ struct format_data *fmt;
+ jmp_buf *eof_jump;
+ namelist_info *ionml;
+ /* A flag used to identify when a non-standard expanded namelist read
+ has occurred. */
+ int expanded_read;
+ /* Storage area for values except for strings. Must be large
+ enough to hold a complex value (two reals) of the largest
+ kind. */
+ char value[32];
+ gfc_offset size_used;
+ unit_pad pad_status;
+ unit_decimal decimal_status;
+ unit_delim delim_status;
+} st_parameter_44;
+
+typedef struct st_parameter_dt
+{
+ st_parameter_common common;
+ GFC_IO_INT rec;
+ GFC_IO_INT *size, *iolength;
+ gfc_array_char *internal_unit_desc;
+ CHARACTER1 (format);
+ CHARACTER2 (advance);
+ CHARACTER1 (internal_unit);
+ CHARACTER2 (namelist_name);
/* Private part of the structure. The compiler just needs
to reserve enough space. */
union
{
- struct
- {
- void (*transfer) (struct st_parameter_dt *, bt, void *, int,
- size_t, size_t);
- struct gfc_unit *current_unit;
- /* Item number in a formatted data transfer. Also used in namelist
- read_logical as an index into line_buffer. */
- int item_count;
- unit_mode mode;
- unit_blank blank_status;
- unit_pad pad_status;
- enum { SIGN_S, SIGN_SS, SIGN_SP } sign_status;
- int scale_factor;
- int max_pos; /* Maximum righthand column written to. */
- /* Number of skips + spaces to be done for T and X-editing. */
- int skips;
- /* Number of spaces to be done for T and X-editing. */
- int pending_spaces;
- /* Whether an EOR condition was encountered. Value is:
- 0 if no EOR was encountered
- 1 if an EOR was encountered due to a 1-byte marker (LF)
- 2 if an EOR was encountered due to a 2-bytes marker (CRLF) */
- int sf_seen_eor;
- unit_advance advance_status;
- unit_decimal decimal_status;
- unit_delim delim_status;
-
- unsigned reversion_flag : 1; /* Format reversion has occurred. */
- unsigned first_item : 1;
- unsigned seen_dollar : 1;
- unsigned eor_condition : 1;
- unsigned no_leading_blank : 1;
- unsigned char_flag : 1;
- unsigned input_complete : 1;
- unsigned at_eol : 1;
- unsigned comma_flag : 1;
- /* A namelist specific flag used in the list directed library
- to flag that calls are being made from namelist read (eg. to
- ignore comments or to treat '/' as a terminator) */
- unsigned namelist_mode : 1;
- /* A namelist specific flag used in the list directed library
- to flag read errors and return, so that an attempt can be
- made to read a new object name. */
- unsigned nml_read_error : 1;
- /* A sequential formatted read specific flag used to signal that a
- character string is being read so don't use commas to shorten a
- formatted field width. */
- unsigned sf_read_comma : 1;
- /* A namelist specific flag used to enable reading input from
- line_buffer for logical reads. */
- unsigned line_buffer_enabled : 1;
- /* An internal unit specific flag used to identify that the associated
- unit is internal. */
- unsigned unit_is_internal : 1;
- /* An internal unit specific flag to signify an EOF condition for list
- directed read. */
- unsigned at_eof : 1;
- /* 16 unused bits. */
-
- char last_char;
- char nml_delim;
-
- int repeat_count;
- int saved_length;
- int saved_used;
- bt saved_type;
- char *saved_string;
- char *scratch;
- char *line_buffer;
- struct format_data *fmt;
- jmp_buf *eof_jump;
- namelist_info *ionml;
- /* A flag used to identify when a non-standard expanded namelist read
- has occurred. */
- int expanded_read;
- /* Storage area for values except for strings. Must be large
- enough to hold a complex value (two reals) of the largest
- kind. */
- char value[32];
- gfc_offset size_used;
- } p;
+ st_parameter_43 q;
+ st_parameter_44 p;
/* This pad size must be equal to the pad_size declared in
trans-io.c (gfc_build_io_library_fndecls). The above structure
must be smaller or equal to this array. */
- char pad[16 * sizeof (char *) + 32 * sizeof (int)];
+ char pad[32 * sizeof (char *) + 32 * sizeof (int)];
} u;
}
st_parameter_dt;
unit_position position;
unit_status status;
unit_pad pad;
+ unit_convert convert;
+ int has_recl;
unit_decimal decimal;
unit_encoding encoding;
unit_round round;
unit_sign sign;
- unit_convert convert;
- int has_recl;
unit_async async;
}
unit_flags;
OSDN Git Service
