if test "${srcdir}" = "."; then
if test "${with_target_subdir}" != "."; then
- libffi_basedir="${srcdir}/${with_multisrctop}.."
+ libffi_basedir="${with_multisrctop}../"
else
- libffi_basedir="${srcdir}/${with_multisrctop}"
+ libffi_basedir="${with_multisrctop}"
fi
else
- libffi_basedir="${srcdir}"
+ libffi_basedir=
fi
ac_aux_dir=
-for ac_dir in ${libffi_basedir}/.. $srcdir/${libffi_basedir}/..; do
+for ac_dir in ${libffi_basedir}.. $srcdir/${libffi_basedir}..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
fi
done
if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in ${libffi_basedir}/.. $srcdir/${libffi_basedir}/.." 1>&2; exit 1; }
+ { echo "configure: error: can not find install-sh or install.sh in ${libffi_basedir}.. $srcdir/${libffi_basedir}.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+# configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+# same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+# as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:672: checking host system type" >&5
+echo "configure:693: checking host system type" >&5
host_alias=$host
case "$host_alias" in
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:714: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:732: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+target_alias=${target_alias-$host_alias}
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
enable_fast_install=yes
fi
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:763: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
- case $nonopt in
- NONE) build_alias=$host_alias ;;
- *) build_alias=$nonopt ;;
- esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:783: checking for $ac_word" >&5
+echo "configure:828: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:813: checking for $ac_word" >&5
+echo "configure:858: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:864: checking for $ac_word" >&5
+echo "configure:909: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:896: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:941: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 907 "configure"
+#line 952 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:912: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:938: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:983: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:943: checking whether we are using GNU C" >&5
+echo "configure:988: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:952: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:997: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:971: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1016: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1014: checking for ld used by GCC" >&5
+echo "configure:1059: checking for ld used by GCC" >&5
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1044: checking for GNU ld" >&5
+echo "configure:1089: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1047: checking for non-GNU ld" >&5
+echo "configure:1092: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1082: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1127: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1099: checking for $LD option to reload object files" >&5
+echo "configure:1144: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1111: checking for BSD-compatible nm" >&5
+echo "configure:1156: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1149: checking whether ln -s works" >&5
+echo "configure:1194: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1170: checking how to recognise dependant libraries" >&5
+echo "configure:1215: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
;;
darwin* | rhapsody*)
+ # this will be overwritten by pass_all, but leave it in just in case
lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
lt_cv_file_magic_cmd='/usr/bin/file -L'
case "$host_os" in
lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
;;
esac
+ lt_cv_deplibs_check_method=pass_all
;;
freebsd* )
# This must be Linux ELF.
linux-gnu*)
case $host_cpu in
- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
lt_cv_deplibs_check_method=pass_all ;;
*)
# glibc up to 2.1.1 does not perform some relocations on ARM
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1343: checking for object suffix" >&5
+echo "configure:1390: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:1349: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1396: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1369: checking for executable suffix" >&5
+echo "configure:1416: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:1412: checking for ${ac_tool_prefix}file" >&5
+echo "configure:1459: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:1474: checking for file" >&5
+echo "configure:1521: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1545: checking for $ac_word" >&5
+echo "configure:1592: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1577: checking for $ac_word" >&5
+echo "configure:1624: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1612: checking for $ac_word" >&5
+echo "configure:1659: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1644: checking for $ac_word" >&5
+echo "configure:1691: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1711 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1712: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1758 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
LD="${LD-ld} -64"
;;
esac
+ fi
fi
rm -rf conftest*
;;
ia64-*-hpux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
- if { (eval echo configure:1731: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if { (eval echo configure:1792: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*ELF-32*)
HPUX_IA64_MODE="32"
rm -rf conftest*
;;
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:1808: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1749: checking whether the C compiler needs -belf" >&5
+echo "configure:1852: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 1762 "configure"
+#line 1865 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1769: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1872: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1897: checking for a BSD compatible install" >&5
+echo "configure:2000: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:1950: checking whether build environment is sane" >&5
+echo "configure:2053: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:2007: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:2110: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:2046: checking for working aclocal" >&5
+echo "configure:2149: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:2059: checking for working autoconf" >&5
+echo "configure:2162: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:2072: checking for working automake" >&5
+echo "configure:2175: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:2085: checking for working autoheader" >&5
+echo "configure:2188: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:2098: checking for working makeinfo" >&5
+echo "configure:2201: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2115: checking for executable suffix" >&5
+echo "configure:2218: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:2125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:2228: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
ac_exeext=$EXEEXT
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2146: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:2249: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2172: checking for $ac_word" >&5
+echo "configure:2275: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2202: checking for $ac_word" >&5
+echo "configure:2305: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2253: checking for $ac_word" >&5
+echo "configure:2356: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2285: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2388: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2296 "configure"
+#line 2399 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2301: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2327: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2430: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2332: checking whether we are using GNU C" >&5
+echo "configure:2435: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2341: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2444: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2360: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2463: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
fi
+
+if test $ac_cv_header_sys_mman_h != yes \
+ || test $ac_cv_func_mmap != yes; then
+ ac_cv_func_mmap_file=no
+ ac_cv_func_mmap_dev_zero=no
+ ac_cv_func_mmap_anon=no
+else
+ echo $ac_n "checking whether read-only mmap of a plain file works""... $ac_c" 1>&6
+echo "configure:2508: checking whether read-only mmap of a plain file works" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # Add a system to this blacklist if
+ # mmap(0, stat_size, PROT_READ, MAP_PRIVATE, fd, 0) doesn't return a
+ # memory area containing the same data that you'd get if you applied
+ # read() to the same fd. The only system known to have a problem here
+ # is VMS, where text files have record structure.
+ case "$host_os" in
+ vms* | ultrix*)
+ ac_cv_func_mmap_file=no ;;
+ *)
+ ac_cv_func_mmap_file=yes;;
+ esac
+fi
+
+echo "$ac_t""$ac_cv_func_mmap_file" 1>&6
+ echo $ac_n "checking whether mmap from /dev/zero works""... $ac_c" 1>&6
+echo "configure:2527: checking whether mmap from /dev/zero works" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_dev_zero'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # Add a system to this blacklist if it has mmap() but /dev/zero
+ # does not exist, or if mmapping /dev/zero does not give anonymous
+ # zeroed pages with both the following properties:
+ # 1. If you map N consecutive pages in with one call, and then
+ # unmap any subset of those pages, the pages that were not
+ # explicitly unmapped remain accessible.
+ # 2. If you map two adjacent blocks of memory and then unmap them
+ # both at once, they must both go away.
+ # Systems known to be in this category are Windows (all variants),
+ # VMS, and Darwin.
+ case "$host_os" in
+ vms* | cygwin* | pe | mingw* | darwin* | ultrix* | hpux10* | hpux11.00)
+ ac_cv_func_mmap_dev_zero=no ;;
+ *)
+ ac_cv_func_mmap_dev_zero=yes;;
+ esac
+fi
+
+echo "$ac_t""$ac_cv_func_mmap_dev_zero" 1>&6
+
+ # Unlike /dev/zero, the MAP_ANON(YMOUS) defines can be probed for.
+ echo $ac_n "checking for MAP_ANON(YMOUS)""... $ac_c" 1>&6
+echo "configure:2553: checking for MAP_ANON(YMOUS)" >&5
+if eval "test \"`echo '$''{'ac_cv_decl_map_anon'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2558 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/mman.h>
+#include <unistd.h>
+
+#ifndef MAP_ANONYMOUS
+#define MAP_ANONYMOUS MAP_ANON
+#endif
+
+int main() {
+int n = MAP_ANONYMOUS;
+; return 0; }
+EOF
+if { (eval echo configure:2572: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_decl_map_anon=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_decl_map_anon=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_decl_map_anon" 1>&6
+
+ if test $ac_cv_decl_map_anon = no; then
+ ac_cv_func_mmap_anon=no
+ else
+ echo $ac_n "checking whether mmap with MAP_ANON(YMOUS) works""... $ac_c" 1>&6
+echo "configure:2590: checking whether mmap with MAP_ANON(YMOUS) works" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_anon'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # Add a system to this blacklist if it has mmap() and MAP_ANON or
+ # MAP_ANONYMOUS, but using mmap(..., MAP_PRIVATE|MAP_ANONYMOUS, -1, 0)
+ # doesn't give anonymous zeroed pages with the same properties listed
+ # above for use of /dev/zero.
+ # Systems known to be in this category are Windows, VMS, and SCO Unix.
+ case "$host_os" in
+ vms* | cygwin* | pe | mingw* | sco* | udk* )
+ ac_cv_func_mmap_anon=no ;;
+ *)
+ ac_cv_func_mmap_anon=yes;;
+ esac
+fi
+
+echo "$ac_t""$ac_cv_func_mmap_anon" 1>&6
+ fi
+fi
+
+if test $ac_cv_func_mmap_file = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_MMAP_FILE 1
+EOF
+
+fi
+if test $ac_cv_func_mmap_dev_zero = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_MMAP_DEV_ZERO 1
+EOF
+
+fi
+if test $ac_cv_func_mmap_anon = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_MMAP_ANON 1
+EOF
+
+fi
+
+
+
+
+if test -d $srcdir/testsuite; then
+ TESTSUBDIR_TRUE=
+ TESTSUBDIR_FALSE='#'
+else
+ TESTSUBDIR_TRUE='#'
+ TESTSUBDIR_FALSE=
+fi
+
+
TARGETDIR="unknown"
case "$host" in
-mips-sgi-irix5.* | mips-sgi-irix6.*) TARGET=MIPS; TARGETDIR=mips;;
i*86-*-linux*) TARGET=X86; TARGETDIR=x86;;
i*86-*-solaris*) TARGET=X86; TARGETDIR=x86;;
i*86-*-beos*) TARGET=X86; TARGETDIR=x86;;
ia64*-*-*) TARGET=IA64; TARGETDIR=ia64;;
m68k-*-linux*) TARGET=M68K; TARGETDIR=m68k;;
mips64*-*);;
+mips-sgi-irix5.* | mips-sgi-irix6.*) TARGET=MIPS_IRIX; TARGETDIR=mips;;
mips*-*-linux*) TARGET=MIPS_LINUX; TARGETDIR=mips;;
-powerpc-*-linux* | powerpc-*-sysv*) TARGET=POWERPC; TARGETDIR=powerpc;;
+powerpc*-*-linux* | powerpc-*-sysv*) TARGET=POWERPC; TARGETDIR=powerpc;;
powerpc-*-beos*) TARGET=POWERPC; TARGETDIR=powerpc;;
powerpc-*-darwin*) TARGET=POWERPC_DARWIN; TARGETDIR=powerpc;;
powerpc-*-aix*) TARGET=POWERPC_AIX; TARGETDIR=powerpc;;
rs6000-*-aix*) TARGET=POWERPC_AIX; TARGETDIR=powerpc;;
arm*-*-linux-*) TARGET=ARM; TARGETDIR=arm;;
+arm*-*-netbsdelf*) TARGET=ARM; TARGETDIR=arm;;
s390-*-linux-*) TARGET=S390; TARGETDIR=s390;;
s390x-*-linux-*) TARGET=S390; TARGETDIR=s390;;
x86_64-*-linux*) TARGET=X86_64; TARGETDIR=x86;;
sh-*-linux* | sh[34]*-*-linux*) TARGET=SH; TARGETDIR=sh;;
+sh64-*-linux* | sh5*-*-linux*) TARGET=SH64; TARGETDIR=sh64;;
esac
+
+
if test $TARGETDIR = unknown; then
{ echo "configure: error: "libffi has not been ported to $host."" 1>&2; exit 1; }
fi
-if test ${TARGET}${ac_cv_prog_gcc} = MIPSyes; then
- MIPS_GCC_TRUE=
- MIPS_GCC_FALSE='#'
-else
- MIPS_GCC_TRUE='#'
- MIPS_GCC_FALSE=
-fi
-
-
-if test ${TARGET}${ac_cv_prog_gcc} = MIPSno; then
- MIPS_SGI_TRUE=
- MIPS_SGI_FALSE='#'
+if test x$TARGET = xMIPS_IRIX; then
+ MIPS_IRIX_TRUE=
+ MIPS_IRIX_FALSE='#'
else
- MIPS_SGI_TRUE='#'
- MIPS_SGI_FALSE=
+ MIPS_IRIX_TRUE='#'
+ MIPS_IRIX_FALSE=
fi
SH_FALSE=
fi
-if test x$TARGET = xMIPS_LINUX; then
- TARGET=MIPS
+
+if test x$TARGET = xSH64; then
+ SH64_TRUE=
+ SH64_FALSE='#'
+else
+ SH64_TRUE='#'
+ SH64_FALSE=
fi
+case x$TARGET in
+ xMIPS*) TARGET=MIPS ;;
+ *) ;;
+esac
+
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2583: checking how to run the C preprocessor" >&5
+echo "configure:2833: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2598 "configure"
+#line 2848 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2604: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2854: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2615 "configure"
+#line 2865 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2621: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2871: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2632 "configure"
+#line 2882 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2638: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2888: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2663: checking for ANSI C header files" >&5
+echo "configure:2913: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2668 "configure"
+#line 2918 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2676: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2926: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2693 "configure"
+#line 2943 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2711 "configure"
+#line 2961 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2732 "configure"
+#line 2982 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2993: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
for ac_func in memcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2769: checking for $ac_func" >&5
+echo "configure:3019: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2774 "configure"
+#line 3024 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2797: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3047: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2824: checking for working alloca.h" >&5
+echo "configure:3074: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2829 "configure"
+#line 3079 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3086: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2857: checking for alloca" >&5
+echo "configure:3107: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2862 "configure"
+#line 3112 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2890: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3140: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2922: checking whether alloca needs Cray hooks" >&5
+echo "configure:3172: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2927 "configure"
+#line 3177 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2952: checking for $ac_func" >&5
+echo "configure:3202: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2957 "configure"
+#line 3207 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2980: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3230: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3007: checking stack direction for C alloca" >&5
+echo "configure:3257: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 3015 "configure"
+#line 3265 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:3034: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3284: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
fi
-echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:3057: checking size of short" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
- cat > conftest.$ac_ext <<EOF
-#line 3063 "configure"
-#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
-
-
-int main() {
-switch (0) case 0: case (sizeof (short) == $ac_size):;
-; return 0; }
-EOF
-if { (eval echo configure:3073: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_sizeof_short=$ac_size
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
- if test x$ac_cv_sizeof_short != x ; then break; fi
-done
-
-fi
-
-if test x$ac_cv_sizeof_short = x ; then
- { echo "configure: error: cannot determine a size for short" 1>&2; exit 1; }
-fi
-echo "$ac_t""$ac_cv_sizeof_short" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_SHORT $ac_cv_sizeof_short
-EOF
-
-
-echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:3096: checking size of int" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
- cat > conftest.$ac_ext <<EOF
-#line 3102 "configure"
-#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
-
-
-int main() {
-switch (0) case 0: case (sizeof (int) == $ac_size):;
-; return 0; }
-EOF
-if { (eval echo configure:3112: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_sizeof_int=$ac_size
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
- if test x$ac_cv_sizeof_int != x ; then break; fi
-done
-
-fi
-
-if test x$ac_cv_sizeof_int = x ; then
- { echo "configure: error: cannot determine a size for int" 1>&2; exit 1; }
-fi
-echo "$ac_t""$ac_cv_sizeof_int" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_INT $ac_cv_sizeof_int
-EOF
-
-
-echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:3135: checking size of long" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
- cat > conftest.$ac_ext <<EOF
-#line 3141 "configure"
-#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
-
-
-int main() {
-switch (0) case 0: case (sizeof (long) == $ac_size):;
-; return 0; }
-EOF
-if { (eval echo configure:3151: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_sizeof_long=$ac_size
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
- if test x$ac_cv_sizeof_long != x ; then break; fi
-done
-
-fi
-
-if test x$ac_cv_sizeof_long = x ; then
- { echo "configure: error: cannot determine a size for long" 1>&2; exit 1; }
-fi
-echo "$ac_t""$ac_cv_sizeof_long" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_LONG $ac_cv_sizeof_long
-EOF
-
-
-echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:3174: checking size of long long" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
- cat > conftest.$ac_ext <<EOF
-#line 3180 "configure"
-#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
-
-
-int main() {
-switch (0) case 0: case (sizeof (long long) == $ac_size):;
-; return 0; }
-EOF
-if { (eval echo configure:3190: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_sizeof_long_long=$ac_size
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
- if test x$ac_cv_sizeof_long_long != x ; then break; fi
-done
-
-fi
-
-if test x$ac_cv_sizeof_long_long = x ; then
- { echo "configure: error: cannot determine a size for long long" 1>&2; exit 1; }
-fi
-echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
-EOF
-
-
-echo $ac_n "checking size of float""... $ac_c" 1>&6
-echo "configure:3213: checking size of float" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_float'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
- cat > conftest.$ac_ext <<EOF
-#line 3219 "configure"
-#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
-
-
-int main() {
-switch (0) case 0: case (sizeof (float) == $ac_size):;
-; return 0; }
-EOF
-if { (eval echo configure:3229: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_sizeof_float=$ac_size
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
- if test x$ac_cv_sizeof_float != x ; then break; fi
-done
-
-fi
-
-if test x$ac_cv_sizeof_float = x ; then
- { echo "configure: error: cannot determine a size for float" 1>&2; exit 1; }
-fi
-echo "$ac_t""$ac_cv_sizeof_float" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_FLOAT $ac_cv_sizeof_float
-EOF
-
-
echo $ac_n "checking size of double""... $ac_c" 1>&6
-echo "configure:3252: checking size of double" >&5
+echo "configure:3307: checking size of double" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 3258 "configure"
+#line 3313 "configure"
#include "confdefs.h"
#include "confdefs.h"
#include <sys/types.h>
switch (0) case 0: case (sizeof (double) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:3268: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3323: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_sizeof_double=$ac_size
else
echo $ac_n "checking size of long double""... $ac_c" 1>&6
-echo "configure:3291: checking size of long double" >&5
+echo "configure:3346: checking size of long double" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 3297 "configure"
+#line 3352 "configure"
#include "confdefs.h"
#include "confdefs.h"
#include <sys/types.h>
switch (0) case 0: case (sizeof (long double) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:3307: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3362: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_sizeof_long_double=$ac_size
else
-echo $ac_n "checking size of void *""... $ac_c" 1>&6
-echo "configure:3331: checking size of void *" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
- cat > conftest.$ac_ext <<EOF
-#line 3337 "configure"
-#include "confdefs.h"
-#include "confdefs.h"
-#include <sys/types.h>
-
-
-int main() {
-switch (0) case 0: case (sizeof (void *) == $ac_size):;
-; return 0; }
+# Also AC_SUBST this variable for ffi.h.
+HAVE_LONG_DOUBLE=0
+if test $ac_cv_sizeof_double != $ac_cv_sizeof_long_double; then
+ if test $ac_cv_sizeof_long_double != 0; then
+ HAVE_LONG_DOUBLE=1
+ cat >> confdefs.h <<\EOF
+#define HAVE_LONG_DOUBLE 1
EOF
-if { (eval echo configure:3347: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_sizeof_void_p=$ac_size
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
- if test x$ac_cv_sizeof_void_p != x ; then break; fi
-done
+ fi
fi
-if test x$ac_cv_sizeof_void_p = x ; then
- { echo "configure: error: cannot determine a size for void *" 1>&2; exit 1; }
-fi
-echo "$ac_t""$ac_cv_sizeof_void_p" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
-EOF
-
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:3370: checking whether byte ordering is bigendian" >&5
+echo "configure:3399: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 3377 "configure"
+#line 3406 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:3388: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3417: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 3392 "configure"
+#line 3421 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:3403: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3432: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
echo $ac_n "cross-compiling... " 2>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3423 "configure"
+#line 3452 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:3436: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
echo "$ac_t""$ac_cv_c_bigendian" 1>&6
if test $ac_cv_c_bigendian = unknown; then
echo $ac_n "checking to probe for byte ordering""... $ac_c" 1>&6
-echo "configure:3454: checking to probe for byte ordering" >&5
+echo "configure:3483: checking to probe for byte ordering" >&5
cat >conftest.c <<EOF
short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
if test x$TARGET = xSPARC; then
echo $ac_n "checking assembler and linker support unaligned pc related relocs""... $ac_c" 1>&6
-echo "configure:3508: checking assembler and linker support unaligned pc related relocs" >&5
+echo "configure:3537: checking assembler and linker support unaligned pc related relocs" >&5
if eval "test \"`echo '$''{'libffi_cv_as_sparc_ua_pcrel'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CFLAGS="$CFLAGS -fpic"
LDFLAGS="$LDFLAGS -shared"
cat > conftest.$ac_ext <<EOF
-#line 3518 "configure"
+#line 3547 "configure"
#include "confdefs.h"
asm (".text; foo: nop; .data; .align 4; .byte 0; .uaword %r_disp32(foo); .text");
int main() {
; return 0; }
EOF
-if { (eval echo configure:3525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3554: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
libffi_cv_as_sparc_ua_pcrel=yes
else
EOF
fi
+
+ echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
+echo "configure:3577: checking assembler .register pseudo-op support" >&5
+if eval "test \"`echo '$''{'libffi_cv_as_register_pseudo_op'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ libffi_cv_as_register_pseudo_op=unknown
+ # Check if we have .register
+ cat > conftest.$ac_ext <<EOF
+#line 3585 "configure"
+#include "confdefs.h"
+asm (".register %g2, #scratch");
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:3592: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ libffi_cv_as_register_pseudo_op=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ libffi_cv_as_register_pseudo_op=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$libffi_cv_as_register_pseudo_op" 1>&6
+ if test "x$libffi_cv_as_register_pseudo_op" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_AS_REGISTER_PSEUDO_OP 1
+EOF
+
+ fi
+fi
+
+echo $ac_n "checking whether .eh_frame section should be read-only""... $ac_c" 1>&6
+echo "configure:3615: checking whether .eh_frame section should be read-only" >&5
+if eval "test \"`echo '$''{'libffi_cv_ro_eh_frame'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ libffi_cv_ro_eh_frame=no
+ echo 'extern void foo (void); void bar (void) { foo (); foo (); }' > conftest.c
+ if $CC $CFLAGS -S -fpic -fexceptions -o conftest.s conftest.c > /dev/null 2>&1; then
+ if grep '.section.*eh_frame.*"a"' conftest.s > /dev/null; then
+ libffi_cv_ro_eh_frame=yes
+ elif grep '.section.*eh_frame.*#alloc' conftest.c \
+ | grep -v '#write' > /dev/null; then
+ libffi_cv_ro_eh_frame=yes
+ fi
+ fi
+ rm -f conftest.*
+
+fi
+
+echo "$ac_t""$libffi_cv_ro_eh_frame" 1>&6
+if test "x$libffi_cv_ro_eh_frame" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_RO_EH_FRAME 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define EH_FRAME_FLAGS "a"
+EOF
+
+else
+ cat >> confdefs.h <<\EOF
+#define EH_FRAME_FLAGS "aw"
+EOF
+
fi
fi
-
-
-if test -z "$with_cross_host"; then
- USE_LIBDIR_TRUE=
- USE_LIBDIR_FALSE='#'
+if test -n "$with_cross_host" &&
+ test x"$with_cross_host" != x"no"; then
+ toolexecdir='$(exec_prefix)/$(target_alias)'
+ toolexeclibdir='$(toolexecdir)/lib'
else
- USE_LIBDIR_TRUE='#'
- USE_LIBDIR_FALSE=
+ toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+ toolexeclibdir='$(libdir)'
fi
+multi_os_directory=`$CC -print-multi-os-directory`
+case $multi_os_directory in
+ .) ;; # Avoid trailing /.
+ *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
+esac
+
+
+
+#Figure out where generated headers like ffitarget.h get installed.
+gcc_version_trigger=${srcdir}/../gcc/version.c
+gcc_version_full=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^\"]*\)\".*/\1/'`
+gcc_version=`echo ${gcc_version_full} | sed -e 's/\([^ ]*\) .*/\1/'`
+tool_include_dir='$(libdir)/gcc/$(target_alias)/'${gcc_version}/include
+
+
+
if test "${multilib}" = "yes"; then
multilib_arg="--enable-multilib"
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "include/Makefile include/ffi.h Makefile fficonfig.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "include/Makefile testsuite/Makefile include/ffi.h Makefile fficonfig.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
-s%@MIPS_GCC_TRUE@%$MIPS_GCC_TRUE%g
-s%@MIPS_GCC_FALSE@%$MIPS_GCC_FALSE%g
-s%@MIPS_SGI_TRUE@%$MIPS_SGI_TRUE%g
-s%@MIPS_SGI_FALSE@%$MIPS_SGI_FALSE%g
+s%@TESTSUBDIR_TRUE@%$TESTSUBDIR_TRUE%g
+s%@TESTSUBDIR_FALSE@%$TESTSUBDIR_FALSE%g
+s%@AM_RUNTESTFLAGS@%$AM_RUNTESTFLAGS%g
+s%@MIPS_IRIX_TRUE@%$MIPS_IRIX_TRUE%g
+s%@MIPS_IRIX_FALSE@%$MIPS_IRIX_FALSE%g
s%@MIPS_LINUX_TRUE@%$MIPS_LINUX_TRUE%g
s%@MIPS_LINUX_FALSE@%$MIPS_LINUX_FALSE%g
s%@SPARC_TRUE@%$SPARC_TRUE%g
s%@X86_64_FALSE@%$X86_64_FALSE%g
s%@SH_TRUE@%$SH_TRUE%g
s%@SH_FALSE@%$SH_FALSE%g
+s%@SH64_TRUE@%$SH64_TRUE%g
+s%@SH64_FALSE@%$SH64_FALSE%g
s%@CPP@%$CPP%g
s%@ALLOCA@%$ALLOCA%g
+s%@HAVE_LONG_DOUBLE@%$HAVE_LONG_DOUBLE%g
s%@TARGET@%$TARGET%g
s%@TARGETDIR@%$TARGETDIR%g
-s%@USE_LIBDIR_TRUE@%$USE_LIBDIR_TRUE%g
-s%@USE_LIBDIR_FALSE@%$USE_LIBDIR_FALSE%g
+s%@toolexecdir@%$toolexecdir%g
+s%@toolexeclibdir@%$toolexeclibdir%g
+s%@tool_include_dir@%$tool_include_dir%g
+s%@gcc_version@%$gcc_version%g
CEOF
EOF
cat >> $CONFIG_STATUS <<EOF
-CONFIG_FILES=\${CONFIG_FILES-"include/Makefile include/ffi.h Makefile"}
+CONFIG_FILES=\${CONFIG_FILES-"include/Makefile testsuite/Makefile include/ffi.h Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
fi; done
EOF
+
+cat >> $CONFIG_STATUS <<EOF
+ac_sources="src/$TARGETDIR/ffitarget.h"
+ac_dests="include/ffitarget.h"
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+srcdir=$ac_given_srcdir
+while test -n "$ac_sources"; do
+ set $ac_dests; ac_dest=$1; shift; ac_dests=$*
+ set $ac_sources; ac_source=$1; shift; ac_sources=$*
+
+ echo "linking $srcdir/$ac_source to $ac_dest"
+
+ if test ! -r $srcdir/$ac_source; then
+ { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
+ fi
+ rm -f $ac_dest
+
+ # Make relative symlinks.
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
+ # The dest file is in a subdirectory.
+ test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
+ ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
+ # A "../" for each directory in $ac_dest_dir_suffix.
+ ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
+ else
+ ac_dest_dir_suffix= ac_dots=
+ fi
+
+ case "$srcdir" in
+ [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
+ *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
+ esac
+
+ # Make a symlink if possible; otherwise try a hard link.
+ if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
+ ln $srcdir/$ac_source $ac_dest; then :
+ else
+ { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
+ fi
+done
+EOF
cat >> $CONFIG_STATUS <<EOF
srcdir=${srcdir}
libffi_basedir=${libffi_basedir}
CC="${CC}"
DEFS="$DEFS"
-test ! -d include && mkdir include
-test ! -f include/fficonfig.h && cp fficonfig.h include/fficonfig.h
-if cmp -s fficonfig.h include/fficonfig.h 2>/dev/null; then
- echo fficonfig.h unchanged
-else
- echo Moving fficonfig.h to include/fficonfig.h
- cp fficonfig.h include/fficonfig.h
-fi
+ORIGINAL_LD_FOR_MULTILIBS="${ORIGINAL_LD_FOR_MULTILIBS}"
+
+# Make target subdirectories if required.
+test -d src || mkdir src
+test -d src/${TARGETDIR} || mkdir src/${TARGETDIR}
+test -d include || mkdir include
+
+
EOF
cat >> $CONFIG_STATUS <<\EOF
if test -n "$CONFIG_FILES"; then
LD="${ORIGINAL_LD_FOR_MULTILIBS}"
- ac_file=Makefile . ${libffi_basedir}/../config-ml.in
+ ac_file=Makefile . ${srcdir}/${libffi_basedir}../config-ml.in
fi
exit 0
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-# Make target subdirectories if required.
-test -d src || mkdir src
-test -d src/${TARGETDIR} || mkdir src/${TARGETDIR}