+# This works around the fact that libtool configuration may change LD
+# for this particular configuration, but some shells, instead of
+# keeping the changes in LD private, export them just because LD is
+# exported.
+ORIGINAL_LD_FOR_MULTILIBS=$LD
+
# Check whether --enable-multilib or --disable-multilib was given.
if test "${enable_multilib+set}" = set; then
enableval="$enable_multilib"
if test "${srcdir}" = "."; then
if test "${with_target_subdir}" != "."; then
- libffi_basedir="${srcdir}/${with_multisrctop}.."
+ libffi_basedir="${with_multisrctop}../"
else
- libffi_basedir="${srcdir}/${with_multisrctop}"
+ libffi_basedir="${with_multisrctop}"
fi
else
- libffi_basedir="${srcdir}"
+ libffi_basedir=
fi
-
ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+for ac_dir in ${libffi_basedir}.. $srcdir/${libffi_basedir}..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
fi
done
if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+ { echo "configure: error: can not find install-sh or install.sh in ${libffi_basedir}.. $srcdir/${libffi_basedir}.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+# configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+# same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+# as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:666: checking host system type" >&5
+echo "configure:693: checking host system type" >&5
host_alias=$host
case "$host_alias" in
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:714: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:732: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+target_alias=${target_alias-$host_alias}
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
enable_fast_install=yes
fi
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:757: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
- case $nonopt in
- NONE) build_alias=$host_alias ;;
- *) build_alias=$nonopt ;;
- esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:777: checking for $ac_word" >&5
+echo "configure:828: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:807: checking for $ac_word" >&5
+echo "configure:858: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:858: checking for $ac_word" >&5
+echo "configure:909: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:890: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:941: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 901 "configure"
+#line 952 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:906: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:932: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:983: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:937: checking whether we are using GNU C" >&5
+echo "configure:988: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:946: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:997: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:965: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1016: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1008: checking for ld used by GCC" >&5
+echo "configure:1059: checking for ld used by GCC" >&5
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1038: checking for GNU ld" >&5
+echo "configure:1089: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1041: checking for non-GNU ld" >&5
+echo "configure:1092: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1076: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1127: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1093: checking for $LD option to reload object files" >&5
+echo "configure:1144: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1105: checking for BSD-compatible nm" >&5
+echo "configure:1156: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1143: checking whether ln -s works" >&5
+echo "configure:1194: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1164: checking how to recognise dependant libraries" >&5
+echo "configure:1215: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
;;
hpux10.20*|hpux11*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ case $host_cpu in
+ hppa*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ esac
;;
irix5* | irix6*)
# This must be Linux ELF.
linux-gnu*)
case $host_cpu in
- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
lt_cv_deplibs_check_method=pass_all ;;
*)
# glibc up to 2.1.1 does not perform some relocations on ARM
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1328: checking for object suffix" >&5
+echo "configure:1388: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:1334: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1394: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1354: checking for executable suffix" >&5
+echo "configure:1414: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1424: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:1397: checking for ${ac_tool_prefix}file" >&5
+echo "configure:1457: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:1459: checking for file" >&5
+echo "configure:1519: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1530: checking for $ac_word" >&5
+echo "configure:1590: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1562: checking for $ac_word" >&5
+echo "configure:1622: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1597: checking for $ac_word" >&5
+echo "configure:1657: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1629: checking for $ac_word" >&5
+echo "configure:1689: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1696 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 1756 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1757: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
LD="${LD-ld} -64"
;;
esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:1790: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:1806: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
fi
rm -rf conftest*
;;
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1718: checking whether the C compiler needs -belf" >&5
+echo "configure:1850: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 1731 "configure"
+#line 1863 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1738: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1870: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1866: checking for a BSD compatible install" >&5
+echo "configure:1998: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:1919: checking whether build environment is sane" >&5
+echo "configure:2051: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1976: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:2108: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:2015: checking for working aclocal" >&5
+echo "configure:2147: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:2028: checking for working autoconf" >&5
+echo "configure:2160: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:2041: checking for working automake" >&5
+echo "configure:2173: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:2054: checking for working autoheader" >&5
+echo "configure:2186: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:2067: checking for working makeinfo" >&5
+echo "configure:2199: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2084: checking for executable suffix" >&5
+echo "configure:2216: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:2094: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:2226: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
ac_exeext=$EXEEXT
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2115: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:2247: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2141: checking for $ac_word" >&5
+echo "configure:2273: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2171: checking for $ac_word" >&5
+echo "configure:2303: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2222: checking for $ac_word" >&5
+echo "configure:2354: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2254: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2386: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2265 "configure"
+#line 2397 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:2270: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2402: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2296: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2428: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2301: checking whether we are using GNU C" >&5
+echo "configure:2433: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2310: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2442: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2329: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:2461: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
fi
+
+
+
+if test -d $srcdir/testsuite; then
+ TESTSUBDIR_TRUE=
+ TESTSUBDIR_FALSE='#'
+else
+ TESTSUBDIR_TRUE='#'
+ TESTSUBDIR_FALSE=
+fi
+
+
TARGETDIR="unknown"
case "$host" in
mips-sgi-irix5.* | mips-sgi-irix6.*) TARGET=MIPS; TARGETDIR=mips;;
i*86-*-solaris*) TARGET=X86; TARGETDIR=x86;;
i*86-*-beos*) TARGET=X86; TARGETDIR=x86;;
i*86-*-freebsd*) TARGET=X86; TARGETDIR=x86;;
+i*86-*-netbsdelf*) TARGET=X86; TARGETDIR=x86;;
i*86-*-win32*) TARGET=X86_WIN32; TARGETDIR=x86;;
i*86-*-cygwin*) TARGET=X86_WIN32; TARGETDIR=x86;;
i*86-*-mingw*) TARGET=X86_WIN32; TARGETDIR=x86;;
sparc-sun-4*) TARGET=SPARC; TARGETDIR=sparc;;
-sparc-sun-*) TARGET=SPARC; TARGETDIR=sparc;;
-sparc-*-linux*) TARGET=SPARC; TARGETDIR=sparc;;
-sparc64-*-linux*) TARGET=SPARC; TARGETDIR=sparc;;
-alpha*-*-linux* | alpha*-*-osf*) TARGET=ALPHA; TARGETDIR=alpha;;
+sparc*-sun-*) TARGET=SPARC; TARGETDIR=sparc;;
+sparc-*-linux* | sparc-*-netbsdelf*) TARGET=SPARC; TARGETDIR=sparc;;
+sparc64-*-linux* | sparc64-*-netbsd*) TARGET=SPARC; TARGETDIR=sparc;;
+alpha*-*-linux* | alpha*-*-osf* | alpha*-*-freebsd* | alpha*-*-netbsd*) TARGET=ALPHA; TARGETDIR=alpha;;
ia64*-*-*) TARGET=IA64; TARGETDIR=ia64;;
m68k-*-linux*) TARGET=M68K; TARGETDIR=m68k;;
-powerpc-*-linux* | powerpc-*-sysv*) TARGET=POWERPC; TARGETDIR=powerpc;;
+mips64*-*);;
+mips*-*-linux*) TARGET=MIPS_LINUX; TARGETDIR=mips;;
+powerpc*-*-linux* | powerpc-*-sysv*) TARGET=POWERPC; TARGETDIR=powerpc;;
powerpc-*-beos*) TARGET=POWERPC; TARGETDIR=powerpc;;
+powerpc-*-darwin*) TARGET=POWERPC_DARWIN; TARGETDIR=powerpc;;
+powerpc-*-aix*) TARGET=POWERPC_AIX; TARGETDIR=powerpc;;
+rs6000-*-aix*) TARGET=POWERPC_AIX; TARGETDIR=powerpc;;
arm*-*-linux-*) TARGET=ARM; TARGETDIR=arm;;
+arm*-*-netbsdelf*) TARGET=ARM; TARGETDIR=arm;;
+s390-*-linux-*) TARGET=S390; TARGETDIR=s390;;
+s390x-*-linux-*) TARGET=S390; TARGETDIR=s390;;
+x86_64-*-linux*) TARGET=X86_64; TARGETDIR=x86;;
+sh-*-linux* | sh[34]*-*-linux*) TARGET=SH; TARGETDIR=sh;;
+sh64-*-linux* | sh5*-*-linux*) TARGET=SH64; TARGETDIR=sh64;;
esac
+
+
if test $TARGETDIR = unknown; then
{ echo "configure: error: "libffi has not been ported to $host."" 1>&2; exit 1; }
fi
fi
+if test x$TARGET = xMIPS_LINUX; then
+ MIPS_LINUX_TRUE=
+ MIPS_LINUX_FALSE='#'
+else
+ MIPS_LINUX_TRUE='#'
+ MIPS_LINUX_FALSE=
+fi
+
+
if test x$TARGET = xSPARC; then
SPARC_TRUE=
SPARC_FALSE='#'
fi
+if test x$TARGET = xPOWERPC_AIX; then
+ POWERPC_AIX_TRUE=
+ POWERPC_AIX_FALSE='#'
+else
+ POWERPC_AIX_TRUE='#'
+ POWERPC_AIX_FALSE=
+fi
+
+
+if test x$TARGET = xPOWERPC_DARWIN; then
+ POWERPC_DARWIN_TRUE=
+ POWERPC_DARWIN_FALSE='#'
+else
+ POWERPC_DARWIN_TRUE='#'
+ POWERPC_DARWIN_FALSE=
+fi
+
+
if test x$TARGET = xARM; then
ARM_TRUE=
ARM_FALSE='#'
ARM_FALSE=
fi
+
+if test x$TARGET = xS390; then
+ S390_TRUE=
+ S390_FALSE='#'
+else
+ S390_TRUE='#'
+ S390_FALSE=
+fi
+
+
+if test x$TARGET = xX86_64; then
+ X86_64_TRUE=
+ X86_64_FALSE='#'
+else
+ X86_64_TRUE='#'
+ X86_64_FALSE=
+fi
+
+
+if test x$TARGET = xSH; then
+ SH_TRUE=
+ SH_FALSE='#'
+else
+ SH_TRUE='#'
+ SH_FALSE=
+fi
+
+
+if test x$TARGET = xSH64; then
+ SH64_TRUE=
+ SH64_FALSE='#'
+else
+ SH64_TRUE='#'
+ SH64_FALSE=
+fi
+
+if test x$TARGET = xMIPS_LINUX; then
+ TARGET=MIPS
+fi
+
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2484: checking how to run the C preprocessor" >&5
+echo "configure:2709: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2499 "configure"
+#line 2724 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2505: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2730: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2516 "configure"
+#line 2741 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2522: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2747: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2533 "configure"
+#line 2758 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2539: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2764: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2564: checking for ANSI C header files" >&5
+echo "configure:2789: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2569 "configure"
+#line 2794 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2577: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2802: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2594 "configure"
+#line 2819 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 2612 "configure"
+#line 2837 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 2633 "configure"
+#line 2858 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:2644: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2869: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
for ac_func in memcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2670: checking for $ac_func" >&5
+echo "configure:2895: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2675 "configure"
+#line 2900 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2698: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2923: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:2725: checking for working alloca.h" >&5
+echo "configure:2950: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2730 "configure"
+#line 2955 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:2737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2962: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:2758: checking for alloca" >&5
+echo "configure:2983: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2763 "configure"
+#line 2988 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:2791: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3016: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2823: checking whether alloca needs Cray hooks" >&5
+echo "configure:3048: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2828 "configure"
+#line 3053 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2853: checking for $ac_func" >&5
+echo "configure:3078: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2858 "configure"
+#line 3083 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2881: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2908: checking stack direction for C alloca" >&5
+echo "configure:3133: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2916 "configure"
+#line 3141 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2935: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:2958: checking size of short" >&5
+echo "configure:3183: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 2966 "configure"
+#line 3189 "configure"
#include "confdefs.h"
-#include <stdio.h>
-main()
-{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(short));
- exit(0);
-}
+#include "confdefs.h"
+#include <sys/types.h>
+
+
+int main() {
+switch (0) case 0: case (sizeof (short) == $ac_size):;
+; return 0; }
EOF
-if { (eval echo configure:2977: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_short=`cat conftestval`
+if { (eval echo configure:3199: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sizeof_short=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_short=0
fi
-rm -fr conftest*
+rm -f conftest*
+ if test x$ac_cv_sizeof_short != x ; then break; fi
+done
+
fi
+if test x$ac_cv_sizeof_short = x ; then
+ { echo "configure: error: cannot determine a size for short" 1>&2; exit 1; }
fi
echo "$ac_t""$ac_cv_sizeof_short" 1>&6
cat >> confdefs.h <<EOF
echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:2997: checking size of int" >&5
+echo "configure:3222: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 3005 "configure"
+#line 3228 "configure"
#include "confdefs.h"
-#include <stdio.h>
-main()
-{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(int));
- exit(0);
-}
+#include "confdefs.h"
+#include <sys/types.h>
+
+
+int main() {
+switch (0) case 0: case (sizeof (int) == $ac_size):;
+; return 0; }
EOF
-if { (eval echo configure:3016: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_int=`cat conftestval`
+if { (eval echo configure:3238: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sizeof_int=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_int=0
fi
-rm -fr conftest*
+rm -f conftest*
+ if test x$ac_cv_sizeof_int != x ; then break; fi
+done
+
fi
+if test x$ac_cv_sizeof_int = x ; then
+ { echo "configure: error: cannot determine a size for int" 1>&2; exit 1; }
fi
echo "$ac_t""$ac_cv_sizeof_int" 1>&6
cat >> confdefs.h <<EOF
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:3036: checking size of long" >&5
+echo "configure:3261: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 3044 "configure"
+#line 3267 "configure"
#include "confdefs.h"
-#include <stdio.h>
-main()
-{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(long));
- exit(0);
-}
+#include "confdefs.h"
+#include <sys/types.h>
+
+
+int main() {
+switch (0) case 0: case (sizeof (long) == $ac_size):;
+; return 0; }
EOF
-if { (eval echo configure:3055: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_long=`cat conftestval`
+if { (eval echo configure:3277: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sizeof_long=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_long=0
fi
-rm -fr conftest*
+rm -f conftest*
+ if test x$ac_cv_sizeof_long != x ; then break; fi
+done
+
fi
+if test x$ac_cv_sizeof_long = x ; then
+ { echo "configure: error: cannot determine a size for long" 1>&2; exit 1; }
fi
echo "$ac_t""$ac_cv_sizeof_long" 1>&6
cat >> confdefs.h <<EOF
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:3075: checking size of long long" >&5
+echo "configure:3300: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 3083 "configure"
+#line 3306 "configure"
#include "confdefs.h"
-#include <stdio.h>
-main()
-{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(long long));
- exit(0);
-}
+#include "confdefs.h"
+#include <sys/types.h>
+
+
+int main() {
+switch (0) case 0: case (sizeof (long long) == $ac_size):;
+; return 0; }
EOF
-if { (eval echo configure:3094: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_long_long=`cat conftestval`
+if { (eval echo configure:3316: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sizeof_long_long=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_long_long=0
fi
-rm -fr conftest*
+rm -f conftest*
+ if test x$ac_cv_sizeof_long_long != x ; then break; fi
+done
+
fi
+if test x$ac_cv_sizeof_long_long = x ; then
+ { echo "configure: error: cannot determine a size for long long" 1>&2; exit 1; }
fi
echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
cat >> confdefs.h <<EOF
echo $ac_n "checking size of float""... $ac_c" 1>&6
-echo "configure:3114: checking size of float" >&5
+echo "configure:3339: checking size of float" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_float'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 3122 "configure"
+#line 3345 "configure"
#include "confdefs.h"
-#include <stdio.h>
-main()
-{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(float));
- exit(0);
-}
+#include "confdefs.h"
+#include <sys/types.h>
+
+
+int main() {
+switch (0) case 0: case (sizeof (float) == $ac_size):;
+; return 0; }
EOF
-if { (eval echo configure:3133: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_float=`cat conftestval`
+if { (eval echo configure:3355: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sizeof_float=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_float=0
fi
-rm -fr conftest*
+rm -f conftest*
+ if test x$ac_cv_sizeof_float != x ; then break; fi
+done
+
fi
+if test x$ac_cv_sizeof_float = x ; then
+ { echo "configure: error: cannot determine a size for float" 1>&2; exit 1; }
fi
echo "$ac_t""$ac_cv_sizeof_float" 1>&6
cat >> confdefs.h <<EOF
echo $ac_n "checking size of double""... $ac_c" 1>&6
-echo "configure:3153: checking size of double" >&5
+echo "configure:3378: checking size of double" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 3161 "configure"
+#line 3384 "configure"
#include "confdefs.h"
-#include <stdio.h>
-main()
-{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(double));
- exit(0);
-}
+#include "confdefs.h"
+#include <sys/types.h>
+
+
+int main() {
+switch (0) case 0: case (sizeof (double) == $ac_size):;
+; return 0; }
EOF
-if { (eval echo configure:3172: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_double=`cat conftestval`
+if { (eval echo configure:3394: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sizeof_double=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_double=0
fi
-rm -fr conftest*
+rm -f conftest*
+ if test x$ac_cv_sizeof_double != x ; then break; fi
+done
+
fi
+if test x$ac_cv_sizeof_double = x ; then
+ { echo "configure: error: cannot determine a size for double" 1>&2; exit 1; }
fi
echo "$ac_t""$ac_cv_sizeof_double" 1>&6
cat >> confdefs.h <<EOF
echo $ac_n "checking size of long double""... $ac_c" 1>&6
-echo "configure:3192: checking size of long double" >&5
+echo "configure:3417: checking size of long double" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 3200 "configure"
+#line 3423 "configure"
#include "confdefs.h"
-#include <stdio.h>
-main()
-{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(long double));
- exit(0);
-}
+#include "confdefs.h"
+#include <sys/types.h>
+
+
+int main() {
+switch (0) case 0: case (sizeof (long double) == $ac_size):;
+; return 0; }
EOF
-if { (eval echo configure:3211: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_long_double=`cat conftestval`
+if { (eval echo configure:3433: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sizeof_long_double=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_long_double=0
fi
-rm -fr conftest*
+rm -f conftest*
+ if test x$ac_cv_sizeof_long_double != x ; then break; fi
+done
+
fi
+if test x$ac_cv_sizeof_long_double = x ; then
+ { echo "configure: error: cannot determine a size for long double" 1>&2; exit 1; }
fi
echo "$ac_t""$ac_cv_sizeof_long_double" 1>&6
cat >> confdefs.h <<EOF
echo $ac_n "checking size of void *""... $ac_c" 1>&6
-echo "configure:3232: checking size of void *" >&5
+echo "configure:3457: checking size of void *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
+ for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 3240 "configure"
+#line 3463 "configure"
#include "confdefs.h"
-#include <stdio.h>
-main()
-{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(void *));
- exit(0);
-}
+#include "confdefs.h"
+#include <sys/types.h>
+
+
+int main() {
+switch (0) case 0: case (sizeof (void *) == $ac_size):;
+; return 0; }
EOF
-if { (eval echo configure:3251: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_void_p=`cat conftestval`
+if { (eval echo configure:3473: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_sizeof_void_p=$ac_size
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_void_p=0
fi
-rm -fr conftest*
+rm -f conftest*
+ if test x$ac_cv_sizeof_void_p != x ; then break; fi
+done
+
fi
+if test x$ac_cv_sizeof_void_p = x ; then
+ { echo "configure: error: cannot determine a size for void *" 1>&2; exit 1; }
fi
echo "$ac_t""$ac_cv_sizeof_void_p" 1>&6
cat >> confdefs.h <<EOF
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:3271: checking whether byte ordering is bigendian" >&5
+echo "configure:3496: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 3278 "configure"
+#line 3503 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:3289: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3514: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 3293 "configure"
+#line 3518 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:3304: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3529: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
rm -f conftest*
if test $ac_cv_c_bigendian = unknown; then
if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
+ echo $ac_n "cross-compiling... " 2>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3324 "configure"
+#line 3549 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:3337: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3562: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
fi
echo "$ac_t""$ac_cv_c_bigendian" 1>&6
+if test $ac_cv_c_bigendian = unknown; then
+echo $ac_n "checking to probe for byte ordering""... $ac_c" 1>&6
+echo "configure:3580: checking to probe for byte ordering" >&5
+
+cat >conftest.c <<EOF
+short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+void _ascii() { char* s = (char*) ascii_mm; s = (char*) ascii_ii; }
+short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+void _ebcdic() { char* s = (char*) ebcdic_mm; s = (char*) ebcdic_ii; }
+int main() { _ascii (); _ebcdic (); return 0; }
+EOF
+ if test -f conftest.c ; then
+ if ${CC-cc} ${CFLAGS} conftest.c -o conftest.o && test -f conftest.o ; then
+ if test `grep -l BIGenDianSyS conftest.o` ; then
+ echo $ac_n ' big endian probe OK, ' 1>&6
+ ac_cv_c_bigendian=yes
+ fi
+ if test `grep -l LiTTleEnDian conftest.o` ; then
+ echo $ac_n ' little endian probe OK, ' 1>&6
+ if test $ac_cv_c_bigendian = yes ; then
+ ac_cv_c_bigendian=unknown;
+ else
+ ac_cv_c_bigendian=no
+ fi
+ fi
+ echo $ac_n 'guessing bigendian ... ' >&6
+ fi
+ fi
+echo "$ac_t""$ac_cv_c_bigendian" 1>&6
+fi
if test $ac_cv_c_bigendian = yes; then
cat >> confdefs.h <<\EOF
#define WORDS_BIGENDIAN 1
EOF
+ cat >> confdefs.h <<\EOF
+#define HOST_WORDS_BIG_ENDIAN 1
+EOF
+
+ BYTEORDER=4321
+else
+ BYTEORDER=1234
+fi
+cat >> confdefs.h <<EOF
+#define BYTEORDER $BYTEORDER
+EOF
+
+if test $ac_cv_c_bigendian = unknown; then
+ { echo "configure: error: unknown endianess - sorry" 1>&2; exit 1; }
+fi
+
+
+if test x$TARGET = xSPARC; then
+ echo $ac_n "checking assembler and linker support unaligned pc related relocs""... $ac_c" 1>&6
+echo "configure:3634: checking assembler and linker support unaligned pc related relocs" >&5
+if eval "test \"`echo '$''{'libffi_cv_as_sparc_ua_pcrel'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ save_CFLAGS="$CFLAGS"
+ save_LDFLAGS="$LDFLAGS"
+ CFLAGS="$CFLAGS -fpic"
+ LDFLAGS="$LDFLAGS -shared"
+ cat > conftest.$ac_ext <<EOF
+#line 3644 "configure"
+#include "confdefs.h"
+asm (".text; foo: nop; .data; .align 4; .byte 0; .uaword %r_disp32(foo); .text");
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:3651: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ libffi_cv_as_sparc_ua_pcrel=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ libffi_cv_as_sparc_ua_pcrel=no
+fi
+rm -f conftest*
+ CFLAGS="$save_CFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+fi
+
+echo "$ac_t""$libffi_cv_as_sparc_ua_pcrel" 1>&6
+ if test "x$libffi_cv_as_sparc_ua_pcrel" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_AS_SPARC_UA_PCREL 1
+EOF
+
+ fi
+
+ echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
+echo "configure:3674: checking assembler .register pseudo-op support" >&5
+if eval "test \"`echo '$''{'libffi_cv_as_register_pseudo_op'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ libffi_cv_as_register_pseudo_op=unknown
+ # Check if we have .register
+ cat > conftest.$ac_ext <<EOF
+#line 3682 "configure"
+#include "confdefs.h"
+asm (".register %g2, #scratch");
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:3689: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ libffi_cv_as_register_pseudo_op=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ libffi_cv_as_register_pseudo_op=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$libffi_cv_as_register_pseudo_op" 1>&6
+ if test "x$libffi_cv_as_register_pseudo_op" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_AS_REGISTER_PSEUDO_OP 1
+EOF
+
+ fi
fi
+echo $ac_n "checking whether .eh_frame section should be read-only""... $ac_c" 1>&6
+echo "configure:3712: checking whether .eh_frame section should be read-only" >&5
+if eval "test \"`echo '$''{'libffi_cv_ro_eh_frame'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ libffi_cv_ro_eh_frame=no
+ echo 'extern void foo (void); void bar (void) { foo (); foo (); }' > conftest.c
+ if $CC $CFLAGS -S -fpic -fexceptions -o conftest.s conftest.c > /dev/null 2>&1; then
+ if grep '.section.*eh_frame.*"a"' conftest.s > /dev/null; then
+ libffi_cv_ro_eh_frame=yes
+ elif grep '.section.*eh_frame.*#alloc' conftest.c \
+ | grep -v '#write' > /dev/null; then
+ libffi_cv_ro_eh_frame=yes
+ fi
+ fi
+ rm -f conftest.*
+
+fi
+
+echo "$ac_t""$libffi_cv_ro_eh_frame" 1>&6
+if test "x$libffi_cv_ro_eh_frame" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_RO_EH_FRAME 1
+EOF
+
+fi
fi
-
-
-if test -z "$with_cross_host"; then
- USE_LIBDIR_TRUE=
- USE_LIBDIR_FALSE='#'
+if test -n "$with_cross_host" &&
+ test x"$with_cross_host" != x"no"; then
+ toolexecdir='$(exec_prefix)/$(target_alias)'
+ toolexeclibdir='$(toolexecdir)/lib'
else
- USE_LIBDIR_TRUE='#'
- USE_LIBDIR_FALSE=
+ toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+ toolexeclibdir='$(libdir)'
fi
+multi_os_directory=`$CC -print-multi-os-directory`
+case $multi_os_directory in
+ .) ;; # Avoid trailing /.
+ *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
+esac
+
+
if test "${multilib}" = "yes"; then
multilib_arg="--enable-multilib"
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "include/Makefile include/ffi.h Makefile fficonfig.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "include/Makefile testsuite/Makefile include/ffi.h Makefile fficonfig.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
s%@MAINT@%$MAINT%g
+s%@TESTSUBDIR_TRUE@%$TESTSUBDIR_TRUE%g
+s%@TESTSUBDIR_FALSE@%$TESTSUBDIR_FALSE%g
+s%@AM_RUNTESTFLAGS@%$AM_RUNTESTFLAGS%g
s%@MIPS_GCC_TRUE@%$MIPS_GCC_TRUE%g
s%@MIPS_GCC_FALSE@%$MIPS_GCC_FALSE%g
s%@MIPS_SGI_TRUE@%$MIPS_SGI_TRUE%g
s%@MIPS_SGI_FALSE@%$MIPS_SGI_FALSE%g
+s%@MIPS_LINUX_TRUE@%$MIPS_LINUX_TRUE%g
+s%@MIPS_LINUX_FALSE@%$MIPS_LINUX_FALSE%g
s%@SPARC_TRUE@%$SPARC_TRUE%g
s%@SPARC_FALSE@%$SPARC_FALSE%g
s%@X86_TRUE@%$X86_TRUE%g
s%@M68K_FALSE@%$M68K_FALSE%g
s%@POWERPC_TRUE@%$POWERPC_TRUE%g
s%@POWERPC_FALSE@%$POWERPC_FALSE%g
+s%@POWERPC_AIX_TRUE@%$POWERPC_AIX_TRUE%g
+s%@POWERPC_AIX_FALSE@%$POWERPC_AIX_FALSE%g
+s%@POWERPC_DARWIN_TRUE@%$POWERPC_DARWIN_TRUE%g
+s%@POWERPC_DARWIN_FALSE@%$POWERPC_DARWIN_FALSE%g
s%@ARM_TRUE@%$ARM_TRUE%g
s%@ARM_FALSE@%$ARM_FALSE%g
+s%@S390_TRUE@%$S390_TRUE%g
+s%@S390_FALSE@%$S390_FALSE%g
+s%@X86_64_TRUE@%$X86_64_TRUE%g
+s%@X86_64_FALSE@%$X86_64_FALSE%g
+s%@SH_TRUE@%$SH_TRUE%g
+s%@SH_FALSE@%$SH_FALSE%g
+s%@SH64_TRUE@%$SH64_TRUE%g
+s%@SH64_FALSE@%$SH64_FALSE%g
s%@CPP@%$CPP%g
s%@ALLOCA@%$ALLOCA%g
s%@TARGET@%$TARGET%g
s%@TARGETDIR@%$TARGETDIR%g
-s%@USE_LIBDIR_TRUE@%$USE_LIBDIR_TRUE%g
-s%@USE_LIBDIR_FALSE@%$USE_LIBDIR_FALSE%g
+s%@toolexecdir@%$toolexecdir%g
+s%@toolexeclibdir@%$toolexeclibdir%g
CEOF
EOF
cat >> $CONFIG_STATUS <<EOF
-CONFIG_FILES=\${CONFIG_FILES-"include/Makefile include/ffi.h Makefile"}
+CONFIG_FILES=\${CONFIG_FILES-"include/Makefile testsuite/Makefile include/ffi.h Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
libffi_basedir=${libffi_basedir}
CC="${CC}"
DEFS="$DEFS"
+ORIGINAL_LD_FOR_MULTILIBS="${ORIGINAL_LD_FOR_MULTILIBS}"
test ! -d include && mkdir include
test ! -f include/fficonfig.h && cp fficonfig.h include/fficonfig.h
if cmp -s fficonfig.h include/fficonfig.h 2>/dev/null; then
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
if test -n "$CONFIG_FILES"; then
- ac_file=Makefile . ${libffi_basedir}/../config-ml.in
+ LD="${ORIGINAL_LD_FOR_MULTILIBS}"
+ ac_file=Makefile . ${srcdir}/${libffi_basedir}../config-ml.in
fi
exit 0