# Makefile for GNU F77 compiler runtime.
-# Copyright (C) 1995-1997 Free Software Foundation, Inc.
+# Copyright (C) 1995-1998, 2001, 2002, 2003 Free Software Foundation, Inc.
# Contributed by Dave Love (d.love@dl.ac.uk).
#
#This file is part of GNU Fortran.
#the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA
#02111-1307, USA.
-SHELL = /bin/sh
+SHELL = @SHELL@
+PWD_COMMAND = $${PWDCMD-pwd}
+MAKEOVERRIDES=
+.NOEXPORTS:
#### Start of system configuration section. ####
-srcdir = @srcdir@
+srcdir = @glibcpp_srcdir@
+VPATH = @glibcpp_srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
target_alias = @target_alias@
gcc_version = @gcc_version@
gcc_version_trigger = @gcc_version_trigger@
+top_srcdir = @top_srcdir@
+toplevel_srcdir = @toplevel_srcdir@
+toolexecdir = @glibcpp_toolexecdir@
+glibcpp_toolexecdir = @glibcpp_toolexecdir@
+glibcpp_toolexeclibdir = @glibcpp_toolexeclibdir@
-bindir = $(exec_prefix)/bin
-libdir = $(exec_prefix)/lib
-datadir = $(prefix)/lib
-mandir = $(prefix)/man
-infodir = $(prefix)/info
-includedir = $(prefix)/include
-docdir = $(datadir)/doc
-libsubdir = $(libdir)/gcc-lib/$(target_alias)/$(gcc_version)
-
-TO_TOPDIR = ..
-
-INSTALL = $(srcdir)/$(TO_TOPDIR)/install-sh -c
-INSTALL_PROGRAM = $(INSTALL)
-INSTALL_DATA = $(INSTALL)
-
-AR = `if test -f $(TO_TOPDIR)/binutils/ar; then \
- echo $(TO_TOPDIR)/binutils/ar; else echo ar; fi`
-AR_FLAGS = rc
-
-RANLIB = `if test -f $(TO_TOPDIR)/binutils/ranlib; then \
- echo $(TO_TOPDIR)/binutils/ranlib; else echo ranlib; fi`
-
-MAKEINFO = `if test -f $(TO_TOPDIR)/texinfo/C/makeinfo; then \
- echo $(TO_TOPDIR)/texinfo/C/makeinfo; else echo makeinfo; fi`
-
-CC = gcc
-CFLAGS = -g
-LIBCFLAGS = $(CFLAGS)
-
-# List of variables to pass to sub-makes. This should not be needed'
-# by GNU make or Sun make (both of which pass command-line variable'
-# overrides thouh $(MAKE)) but may be needed by older versions.'
+top_builddir = .
+libdir = $(exec_prefix)/lib
+libsubdir = $(libdir)/gcc/$(target_alias)/$(gcc_version)
+#
+# Versions should start at 0:0:0 - See libtool manual.
+VERSION_MAJOR=0
+VERSION_MINOR=0
+VERSION_SUB=0
+
+# Multilib support variables.
+MULTISRCTOP =
+MULTIBUILDTOP =
+MULTIDIRS =
+MULTISUBDIR =
+MULTIDO = true
+MULTICLEAN = true
+
+# Not configured per top-level version, since that doesn't get passed
+# Versions should start at 0:0:0 - See libtool manual.
+# down at configure time, but overrridden by the top-level install
+# target.
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+LIBTOOL = @LIBTOOL@
+CC = @CC@
+WARN_CFLAGS = -W -Wall
+CFLAGS = @CFLAGS@
+AR = @AR@
+RANLIB = @RANLIB@
+
+# List of variables to pass to sub-makes.
+# Quote this way so that it can be used to set shell variables too.
FLAGS_TO_PASS= \
- "CC=$(CC)" \
- "CFLAGS=$(CFLAGS)" \
- "F2C_H_DIR=$(s)/libf2c" \
- "G2C_H_DIR=$(r)/$(TARGET_SUBDIR)/libf2c" \
- "GCC_H_DIR=$(s)/include" \
- "LIBCFLAGS=$(LIBCFLAGS)" \
- "PICFLAG=$(PICFLAG)" \
- "RUNTESTFLAGS=$(RUNTESTFLAGS)"
-
-LIBG2C = libg2c.a
-
-MISC = libF77/F77_aloc.o libF77/VersionF.o libF77/main.o libF77/s_rnge.o \
- libF77/abort_.o libF77/getarg_.o libF77/iargc_.o libF77/getenv_.o \
- libF77/signal_.o libF77/s_stop.o libF77/s_paus.o libF77/system_.o \
- libF77/cabs.o libF77/derf_.o libF77/derfc_.o libF77/erf_.o \
- libF77/erfc_.o libF77/sig_die.o libF77/exit_.o \
- libF77/setarg.o libF77/setsig.o
-POW = libF77/pow_ci.o libF77/pow_dd.o libF77/pow_di.o libF77/pow_hh.o \
- libF77/pow_ii.o libF77/pow_ri.o libF77/pow_zi.o libF77/pow_zz.o \
- libF77/pow_qq.o
-CX = libF77/c_abs.o libF77/c_cos.o libF77/c_div.o libF77/c_exp.o \
- libF77/c_log.o libF77/c_sin.o libF77/c_sqrt.o
-DCX = libF77/z_abs.o libF77/z_cos.o libF77/z_div.o libF77/z_exp.o \
- libF77/z_log.o libF77/z_sin.o libF77/z_sqrt.o
-REAL = libF77/r_abs.o libF77/r_acos.o libF77/r_asin.o libF77/r_atan.o \
- libF77/r_atn2.o libF77/r_cnjg.o libF77/r_cos.o libF77/r_cosh.o \
- libF77/r_dim.o libF77/r_exp.o libF77/r_imag.o libF77/r_int.o \
- libF77/r_lg10.o libF77/r_log.o libF77/r_mod.o libF77/r_nint.o \
- libF77/r_sign.o libF77/r_sin.o libF77/r_sinh.o libF77/r_sqrt.o \
- libF77/r_tan.o libF77/r_tanh.o
-DBL = libF77/d_abs.o libF77/d_acos.o libF77/d_asin.o libF77/d_atan.o \
- libF77/d_atn2.o libF77/d_cnjg.o libF77/d_cos.o libF77/d_cosh.o \
- libF77/d_dim.o libF77/d_exp.o libF77/d_imag.o libF77/d_int.o \
- libF77/d_lg10.o libF77/d_log.o libF77/d_mod.o libF77/d_nint.o \
- libF77/d_prod.o libF77/d_sign.o libF77/d_sin.o libF77/d_sinh.o \
- libF77/d_sqrt.o libF77/d_tan.o libF77/d_tanh.o
-INT = libF77/i_abs.o libF77/i_dim.o libF77/i_dnnt.o libF77/i_indx.o \
- libF77/i_len.o libF77/i_mod.o libF77/i_nint.o libF77/i_sign.o
-HALF = libF77/h_abs.o libF77/h_dim.o libF77/h_dnnt.o libF77/h_indx.o \
- libF77/h_len.o libF77/h_mod.o libF77/h_nint.o libF77/h_sign.o
-CMP = libF77/l_ge.o libF77/l_gt.o libF77/l_le.o libF77/l_lt.o \
- libF77/hl_ge.o libF77/hl_gt.o libF77/hl_le.o libF77/hl_lt.o
-EFL = libF77/ef1asc_.o libF77/ef1cmc_.o
-CHAR = libF77/s_cat.o libF77/s_cmp.o libF77/s_copy.o
-F90BIT = libF77/lbitbits.o libF77/lbitshft.o libF77/qbitbits.o \
- libF77/qbitshft.o
-FOBJ = $(MISC) $(POW) $(CX) $(DCX) $(REAL) $(DBL) $(INT) $(HALF) $(CMP) \
- $(EFL) $(CHAR) $(F90BIT)
-
-IOBJ = libI77/VersionI.o libI77/backspace.o libI77/close.o libI77/dfe.o \
- libI77/dolio.o libI77/due.o libI77/endfile.o libI77/err.o \
- libI77/fmt.o libI77/fmtlib.o libI77/iio.o libI77/ilnw.o \
- libI77/inquire.o libI77/lread.o libI77/lwrite.o libI77/open.o \
- libI77/rdfmt.o libI77/rewind.o libI77/rsfe.o libI77/rsli.o \
- libI77/rsne.o libI77/sfe.o libI77/sue.o libI77/typesize.o \
- libI77/uio.o libI77/util.o libI77/wref.o libI77/wrtfmt.o \
- libI77/wsfe.o libI77/wsle.o libI77/wsne.o libI77/xwsne.o \
- libI77/ftell_.o
-
-UOBJ = libU77/VersionU.o libU77/gerror_.o libU77/perror_.o libU77/ierrno_.o \
- libU77/itime_.o libU77/time_.o libU77/unlink_.o libU77/fnum_.o \
- libU77/getpid_.o libU77/getuid_.o libU77/getgid_.o libU77/kill_.o \
- libU77/rand_.o libU77/srand_.o libU77/irand_.o libU77/sleep_.o \
- libU77/idate_.o libU77/ctime_.o libU77/etime_.o libU77/dtime_.o \
- libU77/isatty_.o libU77/ltime_.o libU77/fstat_.o libU77/stat_.o \
- libU77/lstat_.o libU77/access_.o libU77/link_.o libU77/getlog_.o \
- libU77/ttynam_.o libU77/getcwd_.o libU77/vxttime_.o \
- libU77/vxtidate_.o libU77/gmtime_.o libU77/fdate_.o libU77/secnds_.o \
- libU77/bes.o libU77/dbes.o libU77/chdir_.o libU77/chmod_.o \
- libU77/lnblnk_.o libU77/hostnm_.o libU77/rename_.o libU77/fgetc_.o \
- libU77/fputc_.o libU77/umask_.o libU77/sys_clock_.o libU77/date_.o \
- libU77/second_.o libU77/flush1_.o libU77/alarm_.o libU77/mclock_.o \
- libU77/symlnk_.o libU77/datetime_.o
+ CC='$(CC)' \
+ LD='$(LD)' \
+ LIBTOOL='$(LIBTOOL)' \
+ WARN_CFLAGS='$(WARN_CFLAGS)' \
+ CFLAGS='$(CFLAGS)' \
+ CPPFLAGS='$(CPPFLAGS)' \
+ DESTDIR='$(DESTDIR)' \
+ AR='$(AR)' \
+ RANLIB='$(RANLIB)' \
+ prefix='$(prefix)' \
+ exec_prefix='$(exec_prefix)' \
+ libdir='$(libdir)' \
+ libsubdir='$(libsubdir)' \
+ tooldir='$(tooldir)'
+
+LIBG2C_BASE = libg2c
+LIBG2C = $(LIBG2C_BASE).la
+
+SUBDIRS = libI77 libF77 libU77
F2CEXT = abort derf derfc ef1asc ef1cmc erf erfc exit getarg getenv iargc \
signal system flush ftell fseek access besj0 besj1 besjn besy0 besy1 \
- besyn chdir chmod ctime date dbesj0 dbesj1 dbesjn dbesy0 dbesy1 dbesyn \
+ besyn chdir chmod ctime dbesj0 dbesj1 dbesjn dbesy0 dbesy1 dbesyn \
dtime etime fdate fgetc fget flush1 fnum fputc fput fstat gerror \
getcwd getgid getlog getpid getuid gmtime hostnm idate ierrno irand \
isatty itime kill link lnblnk lstat ltime mclock perror rand rename \
secnds second sleep srand stat symlnk time ttynam umask unlink \
- vxtidt vxttim alarm
-
-all: g2c.h $(LIBG2C)
-
-$(LIBG2C): stamp-libf77 stamp-libi77 stamp-libu77 stamp-libe77
- rm -f $(LIBG2C)
- $(AR) $(AR_FLAGS) $(LIBG2C) $(FOBJ)
- $(AR) $(AR_FLAGS) $(LIBG2C) $(IOBJ)
- $(AR) $(AR_FLAGS) $(LIBG2C) $(UOBJ)
- objs=""; for i in $(F2CEXT); do objs="$$objs libE77/L$$i.o"; done; \
- $(AR) $(AR_FLAGS) $(LIBG2C) $$objs
- $(RANLIB) $(LIBG2C)
-
-stamp-libi77: libI77/Makefile
- rm -f stamp-libi77
+ vxttim alarm \
+ date_y2kbuggy date_y2kbug vxtidt_y2kbuggy vxtidt_y2kbug
+
+.SUFFIXES:
+
+# The logic here is partly dictated by the desire to keep the lib?77
+# subdirs for compatibility with the Netlib version and because libU77
+# has a different copyright; then the libe77 bit (EXTERNALly-callable
+# versions) is funny. Given that, as well as keeping things as simple
+# as possible we want (at least) the following:
+# * Allow make to be run at the top level (all-target-libf2c), at this
+# level, or the subdirs of this level. In the latter case we only
+# compile, rather than updating libg2c.a;
+# * A robust set of dependencies, so that we rebuild (as little as
+# possible) if a configuration file, g2c.h or any lib?77/*.c file
+# changes;
+# * Avoid unnecessary running of ar and ranlib;
+# * Expose parallelism where reasonable, but not as a priority.
+
+# The intended top-level target here does a non-multilib build (via
+# the dependency) and then (perhaps) builds multilibs.
+
+all: all-unilib
+ : $(MAKE) ; exec $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO="all-unilib"
+
+# `all-unilib' is the overall target in the absence of multilibs,
+# meant to be invoked via multi-do for multilibs.
+
+# Its dependencies can be satisfied in parallel. The [fiu]77 targets
+# update stamp files (object file lists, actually, see the subdir
+# makefiles) on which the $(LIBG2C) depends. The stamp files
+# s-lib[fiu]77 are intentionally not targets, since we're only meant
+# to come in at the level of this target. The [fiu]77 targets always
+# invoke sub makes to check dependencies in the subdirs, else we'd
+# have to maintain them at this level; we live with the overhead of
+# some recursive makes which may do nothing.
+
+all-unilib: i77 f77 u77 s-libe77
+ $(MAKE) $(FLAGS_TO_PASS) $(LIBG2C)
+
+i77 f77 u77: g2c.h
+
+# This target should normally only get invoked via `all-unilib' --
+# after all's well in the subdirs -- actually to assemble the library.
+# The stamp files contain the object lists of each component of the
+# library. The point of breaking them up is to avoid command-line
+# length limitations.
+
+$(LIBG2C): s-libi77 s-libf77 s-libu77 s-libe77
+ $(LIBTOOL) --mode=link $(CC) -o $@ \
+ -version-info $(VERSION_MAJOR):$(VERSION_MINOR):$(VERSION_SUB) \
+ -rpath $(glibcpp_toolexeclibdir) \
+ -objectlist s-libe77 \
+ -objectlist s-libf77 \
+ -objectlist s-libi77 \
+ -objectlist s-libu77 \
+ -lm
+
+i77:
cd libI77; $(MAKE) $(FLAGS_TO_PASS) all
- touch stamp-libi77
-stamp-libf77: libF77/Makefile
- rm -f stamp-libf77
+f77:
cd libF77; $(MAKE) $(FLAGS_TO_PASS) all
- touch stamp-libf77
-stamp-libu77: libU77/Makefile
- rm -f stamp-libu77
+u77:
cd libU77; $(MAKE) $(FLAGS_TO_PASS) all
- touch stamp-libu77
-stamp-libe77: $(srcdir)/f2cext.c
- rm -f stamp-libe77
- if [ -d libE77 ]; then rm -f libE77/*.o; else mkdir libE77; fi
+s-libe77: f2cext.c
+ if [ -d libE77 ]; then rm -f libE77/*.o libE77/*.lo; else mkdir libE77; fi
+ -rm -f $@.T $@
for name in $(F2CEXT); \
do \
echo $${name}; \
- $(CC) -c -I. -I$(srcdir) -I../../include $(CPPFLAGS) $(CFLAGS) \
- -DL$${name} $(srcdir)/f2cext.c \
- -o libE77/L$${name}.o; \
+ $(LIBTOOL) --mode=compile $(CC) -c -I. -I$(srcdir) -I../../include \
+ $(CPPFLAGS) $(WARN_CFLAGS) $(CFLAGS) -DL$${name} $(srcdir)/f2cext.c \
+ -o libE77/L$${name}.lo ; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
+ echo libE77/L$${name}.lo >> $@.T; \
done
- touch stamp-libe77
-
-${srcdir}/configure: ${srcdir}/configure.in
- rm -f config.cache Makefile g2c.h \
- && cd $(srcdir) && autoconf && rm -f config.cache
-${srcdir}/libU77/configure: ${srcdir}/libU77/configure.in
- rm -f libU77/config.cache libU77/Makefile && \
- cd $(srcdir)/libU77 && autoconf && rm -f config.cache
-g2c.h Makefile: $(srcdir)/g2c.h.in $(srcdir)/Makefile.in config.status
+ mv $@.T $@
+
+f2cext.c: g2c.h
+
+${srcdir}/configure: configure.in
+ rm -f config.cache
+ cd $(srcdir) && autoconf
+
+# Dependence on Makefile serializes for parallel make.
+g2c.h: g2c.hin config.status Makefile
+# Might try to avoid rebuilding everything if Makefile or configure
+# changes and g2c.h doesn't; see also the Makefile rule. Should
+# depend on another stamp file rather than using the commented-out
+# lines below, since g2c.h isn't necessarily brought up to date.
+# mv g2c.h g2c.x
$(SHELL) config.status
-config.status: $(srcdir)/configure $(gcc_version_trigger)
- $(SHELL) config.status --recheck
+# $(SHELL) $(srcdir)/../move-if-change g2c.h g2c.x && mv g2c.x g2c.h
-info install-info clean-info dvi:
+Makefile: Makefile.in config.status
+# Autoconf doc uses `./config.status'. Is there a good reason to use $(SHELL)?
+ $(SHELL) config.status
+
+config.status: configure $(gcc_version_trigger)
+# Make sure we don't pick up a site config file and that configure
+# gets run with correct values of variables such as CC.
+ CONFIG_SITE=no-such-file $(FLAGS_TO_PASS) \
+ $(SHELL) config.status --recheck
+
+info install-info clean-info dvi TAGS dist installcheck installdirs:
check:
cd libU77; $(MAKE) G77DIR=../../../gcc/ check
-install:
- $(INSTALL_DATA) $(LIBG2C) $(libsubdir)/$(LIBG2C).n
- ( cd $(libsubdir) ; $(RANLIB) $(LIBG2C).n )
- mv -f $(libsubdir)/$(LIBG2C).n $(libsubdir)/$(LIBG2C)
- $(INSTALL_DATA) g2c.h $(libsubdir)/include/g2c.h
- @if [ -f f2c-install-ok -o -f $(srcdir)/f2c-install-ok ]; then \
- echo ''; \
- echo 'Warning: g77 no longer installs libf2c.a or f2c.h.'; \
- echo ' You must do so yourself. For more information,'; \
- echo ' read "Distributing Binaries" in the g77 docs.'; \
- echo ' (To turn off this warning, delete the file'; \
- echo ' f2c-install-ok in the source or build directory.)'; \
- echo ''; \
- fi
+install: all
+ $(SHELL) $(toplevel_srcdir)/mkinstalldirs $(DESTDIR)$(glibcpp_toolexeclibdir)
+ $(LIBTOOL) --mode=install $(INSTALL) $(LIBG2C) $(DESTDIR)$(glibcpp_toolexeclibdir)
+ $(INSTALL_DATA) libfrtbegin.a $(DESTDIR)$(glibcpp_toolexeclibdir)
+ $(RANLIB) $(DESTDIR)$(glibcpp_toolexeclibdir)/libfrtbegin.a
+ $(INSTALL_DATA) g2c.h $(DESTDIR)$(libsubdir)/include/g2c.h
+ $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO="$@"
+ @-$(LIBTOOL) --mode=finish $(DESTDIR)$(glibcpp_toolexeclibdir)
-mostlyclean:
- rm -f stamp-* $(LIBG2C)
- rm -f libF77/*.o
- rm -f libI77/*.o
- rm -f libU77/*.o
- rm -fr libE77
+install-strip:
+ $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
-clean:
- rm -f config.log libU77/config.log libU77/a.out
+uninstall:
+ rm -f $(DESTDIR)$(libsubdir)/include/g2c.h
+ rm -f $(DESTDIR)$(glibcpp_toolexeclibdir)/libfrtbegin.a
+ $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(glibcpp_toolexeclibdir)$(LIBG2C_BASE).la
+ $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO="$@"
-distclean:
- rm -f Makefile config.cache config.status g2c.h
- rm -f lib?77/Makefile lib?77/config.status
- rm -f lib?77/config.cache lib?77/config.h
+mostlyclean:
+ rm -f $(LIBG2C) objlist
+ $(MAKE) DO=$@ DODIRS="$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do; \
+ $(MULTICLEAN) multi-clean DO=$@
+ rm -fr libE77 s-libe77
+
+clean: mostlyclean
+ rm -f config.log
+ $(MAKE) DO=$@ DODIRS="$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do; \
+ $(MULTICLEAN) multi-clean DO=$@
+ rm -rf .libs
+
+distclean: clean
+ rm -f g2c.h s-libe77
+ $(MAKE) DO=$@ DODIRS="$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do; \
+ $(MULTICLEAN) multi-clean DO=distclean
+ rm -f config.cache config.status Makefile
maintainer-clean:
- rm -f $(srcdir)/configure $(srcdir)/libU77/configure
-rebuilt: ${srcdir}/configure ${srcdir}/libU77/configure
+rebuilt: configure
+
+.PHONY: rebuilt mostlyclean clean distclean maintainer-clean all \
+ i77 f77 u77 check uninstall install-strip dist \
+ installcheck installdirs all-unilib
+
+subdir_do:
+ @rootpre=`${PWD_COMMAND}`/; export rootpre; \
+ srcrootpre=`cd $(srcdir); ${PWD_COMMAND}`/; export srcrootpre; \
+ for i in .. $(DODIRS); do \
+ if [ x$$i != x.. ]; then \
+ if [ -f ./$$i/Makefile ]; then \
+ if (cd ./$$i; $(MAKE) $(FLAGS_TO_PASS) $(DO)); then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else true; fi; \
+ else true; fi; \
+ done
-.PHONY: rebuilt mostlyclean clean distclean maintainer-clean all
+# multidoings may be added here by configure.
OSDN Git Service
