/* Loop Vectorization
- Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+ Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
Contributed by Dorit Naishlos <dorit@il.ibm.com>
This file is part of GCC.
#include "ggc.h"
#include "tree.h"
#include "target.h"
-
#include "rtl.h"
#include "basic-block.h"
#include "diagnostic.h"
#include "cfglayout.h"
#include "expr.h"
#include "optabs.h"
+#include "toplev.h"
#include "tree-chrec.h"
#include "tree-data-ref.h"
#include "tree-scalar-evolution.h"
+#include "input.h"
#include "tree-vectorizer.h"
#include "tree-pass.h"
-/* Main analysis functions. */
-static loop_vec_info vect_analyze_loop (struct loop *);
-static loop_vec_info vect_analyze_loop_form (struct loop *);
-static bool vect_analyze_data_refs (loop_vec_info);
-static bool vect_mark_stmts_to_be_vectorized (loop_vec_info);
-static bool vect_analyze_scalar_cycles (loop_vec_info);
-static bool vect_analyze_data_ref_accesses (loop_vec_info);
-static bool vect_analyze_data_refs_alignment (loop_vec_info);
-static void vect_compute_data_refs_alignment (loop_vec_info);
-static bool vect_analyze_operations (loop_vec_info);
-
-/* Main code transformation functions. */
-static void vect_transform_loop (loop_vec_info, struct loops *);
-static void vect_transform_loop_bound (loop_vec_info);
-static bool vect_transform_stmt (tree, block_stmt_iterator *);
-static bool vectorizable_load (tree, block_stmt_iterator *, tree *);
-static bool vectorizable_store (tree, block_stmt_iterator *, tree *);
-static bool vectorizable_operation (tree, block_stmt_iterator *, tree *);
-static bool vectorizable_assignment (tree, block_stmt_iterator *, tree *);
-static void vect_align_data_ref (tree);
-static void vect_enhance_data_refs_alignment (loop_vec_info);
-
-/* Utility functions for the analyses. */
-static bool vect_is_simple_use (tree , struct loop *, tree *);
-static bool exist_non_indexing_operands_for_use_p (tree, tree);
-static bool vect_is_simple_iv_evolution (unsigned, tree, tree *, tree *, bool);
-static void vect_mark_relevant (varray_type, tree);
-static bool vect_stmt_relevant_p (tree, loop_vec_info);
-static tree vect_get_loop_niters (struct loop *, HOST_WIDE_INT *);
-static bool vect_compute_data_ref_alignment
- (struct data_reference *, loop_vec_info);
-static bool vect_analyze_data_ref_access (struct data_reference *);
-static bool vect_get_first_index (tree, tree *);
-static bool vect_can_force_dr_alignment_p (tree, unsigned int);
-static struct data_reference * vect_analyze_pointer_ref_access (tree, tree, bool);
-static tree vect_get_base_and_bit_offset
- (struct data_reference *, tree, tree, loop_vec_info, tree *, bool*);
-static struct data_reference * vect_analyze_pointer_ref_access
- (tree, tree, bool);
-static tree vect_compute_array_base_alignment (tree, tree, tree *, tree *);
-static tree vect_compute_array_ref_alignment
- (struct data_reference *, loop_vec_info, tree, tree *);
-static tree vect_get_ptr_offset (tree, tree, tree *);
-static tree vect_get_symbl_and_dr
- (tree, tree, bool, loop_vec_info, struct data_reference **);
-
-/* Utility functions for the code transformation. */
-static tree vect_create_destination_var (tree, tree);
-static tree vect_create_data_ref (tree, block_stmt_iterator *);
-static tree vect_create_index_for_vector_ref (struct loop *, block_stmt_iterator *);
-static tree vect_create_addr_base_for_vector_ref (tree, tree *);
-static tree get_vectype_for_scalar_type (tree);
-static tree vect_get_new_vect_var (tree, enum vect_var_kind, const char *);
-static tree vect_get_vec_def_for_operand (tree, tree);
-static tree vect_init_vector (tree, tree);
-static void vect_finish_stmt_generation
- (tree stmt, tree vec_stmt, block_stmt_iterator *bsi);
-
-/* Utilities for creation and deletion of vec_info structs. */
-loop_vec_info new_loop_vec_info (struct loop *loop);
-void destroy_loop_vec_info (loop_vec_info);
-stmt_vec_info new_stmt_vec_info (tree stmt, struct loop *loop);
-
-static bool vect_debug_stats (struct loop *loop);
-static bool vect_debug_details (struct loop *loop);
+/*************************************************************************
+ Simple Loop Peeling Utilities
+ *************************************************************************/
+static struct loop *slpeel_tree_duplicate_loop_to_edge_cfg
+ (struct loop *, struct loops *, edge);
+static void slpeel_update_phis_for_duplicate_loop
+ (struct loop *, struct loop *, bool after);
+static void slpeel_update_phi_nodes_for_guard (edge, struct loop *, bool, bool);
+static edge slpeel_add_loop_guard (basic_block, tree, basic_block, basic_block);
+static void allocate_new_names (bitmap);
+static void rename_use_op (use_operand_p);
+static void rename_def_op (def_operand_p, tree);
+static void rename_variables_in_bb (basic_block);
+static void free_new_names (bitmap);
+static void rename_variables_in_loop (struct loop *);
-/* Function new_stmt_vec_info.
+/*************************************************************************
+ General Vectorization Utilities
+ *************************************************************************/
+static void vect_set_dump_settings (void);
+static bool need_imm_uses_for (tree);
- Create and initialize a new stmt_vec_info struct for STMT. */
+/* vect_dump will be set to stderr or dump_file if exist. */
+FILE *vect_dump;
-stmt_vec_info
-new_stmt_vec_info (tree stmt, struct loop *loop)
-{
- stmt_vec_info res;
- res = (stmt_vec_info) xcalloc (1, sizeof (struct _stmt_vec_info));
+/* vect_verbosity_level set to an invalid value
+ to mark that it's uninitialized. */
+enum verbosity_levels vect_verbosity_level = MAX_VERBOSITY_LEVEL;
- STMT_VINFO_TYPE (res) = undef_vec_info_type;
- STMT_VINFO_STMT (res) = stmt;
- STMT_VINFO_LOOP (res) = loop;
- STMT_VINFO_RELEVANT_P (res) = 0;
- STMT_VINFO_VECTYPE (res) = NULL;
- STMT_VINFO_VEC_STMT (res) = NULL;
- STMT_VINFO_DATA_REF (res) = NULL;
- STMT_VINFO_MEMTAG (res) = NULL;
- STMT_VINFO_VECT_DR_BASE (res) = NULL;
- return res;
-}
+\f
+/*************************************************************************
+ Simple Loop Peeling Utilities
+ Utilities to support loop peeling for vectorization purposes.
+ *************************************************************************/
-/* Function new_loop_vec_info.
- Create and initialize a new loop_vec_info struct for LOOP, as well as
- stmt_vec_info structs for all the stmts in LOOP. */
+/* For each definition in DEFINITIONS this function allocates
+ new ssa name. */
-loop_vec_info
-new_loop_vec_info (struct loop *loop)
+static void
+allocate_new_names (bitmap definitions)
{
- loop_vec_info res;
- basic_block *bbs;
- block_stmt_iterator si;
- unsigned int i;
+ unsigned ver;
+ bitmap_iterator bi;
- res = (loop_vec_info) xcalloc (1, sizeof (struct _loop_vec_info));
+ EXECUTE_IF_SET_IN_BITMAP (definitions, 0, ver, bi)
+ {
+ tree def = ssa_name (ver);
+ tree *new_name_ptr = xmalloc (sizeof (tree));
- bbs = get_loop_body (loop);
+ bool abnormal = SSA_NAME_OCCURS_IN_ABNORMAL_PHI (def);
- /* Create stmt_info for all stmts in the loop. */
- for (i = 0; i < loop->num_nodes; i++)
- {
- basic_block bb = bbs[i];
- for (si = bsi_start (bb); !bsi_end_p (si); bsi_next (&si))
- {
- tree stmt = bsi_stmt (si);
- stmt_ann_t ann;
+ *new_name_ptr = duplicate_ssa_name (def, SSA_NAME_DEF_STMT (def));
+ SSA_NAME_OCCURS_IN_ABNORMAL_PHI (*new_name_ptr) = abnormal;
- get_stmt_operands (stmt);
- ann = stmt_ann (stmt);
- set_stmt_info (ann, new_stmt_vec_info (stmt, loop));
- }
+ SSA_NAME_AUX (def) = new_name_ptr;
}
-
- LOOP_VINFO_LOOP (res) = loop;
- LOOP_VINFO_BBS (res) = bbs;
- LOOP_VINFO_EXIT_COND (res) = NULL;
- LOOP_VINFO_NITERS (res) = -1;
- LOOP_VINFO_VECTORIZABLE_P (res) = 0;
- LOOP_VINFO_VECT_FACTOR (res) = 0;
- VARRAY_GENERIC_PTR_INIT (LOOP_VINFO_DATAREF_WRITES (res), 20,
- "loop_write_datarefs");
- VARRAY_GENERIC_PTR_INIT (LOOP_VINFO_DATAREF_READS (res), 20,
- "loop_read_datarefs");
- return res;
}
-/* Function destroy_loop_vec_info.
-
- Free LOOP_VINFO struct, as well as all the stmt_vec_info structs of all the
- stmts in the loop. */
+/* Renames the use *OP_P. */
-void
-destroy_loop_vec_info (loop_vec_info loop_vinfo)
+static void
+rename_use_op (use_operand_p op_p)
{
- struct loop *loop;
- basic_block *bbs;
- int nbbs;
- block_stmt_iterator si;
- int j;
+ tree *new_name_ptr;
- if (!loop_vinfo)
+ if (TREE_CODE (USE_FROM_PTR (op_p)) != SSA_NAME)
return;
- loop = LOOP_VINFO_LOOP (loop_vinfo);
-
- bbs = LOOP_VINFO_BBS (loop_vinfo);
- nbbs = loop->num_nodes;
+ new_name_ptr = SSA_NAME_AUX (USE_FROM_PTR (op_p));
- for (j = 0; j < nbbs; j++)
- {
- basic_block bb = bbs[j];
- for (si = bsi_start (bb); !bsi_end_p (si); bsi_next (&si))
- {
- tree stmt = bsi_stmt (si);
- stmt_ann_t ann = stmt_ann (stmt);
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- free (stmt_info);
- set_stmt_info (ann, NULL);
- }
- }
+ /* Something defined outside of the loop. */
+ if (!new_name_ptr)
+ return;
- free (LOOP_VINFO_BBS (loop_vinfo));
- varray_clear (LOOP_VINFO_DATAREF_WRITES (loop_vinfo));
- varray_clear (LOOP_VINFO_DATAREF_READS (loop_vinfo));
+ /* An ordinary ssa name defined in the loop. */
- free (loop_vinfo);
+ SET_USE (op_p, *new_name_ptr);
}
-/* Function debug_loop_stats.
-
- For vectorization statistics dumps. */
+/* Renames the def *OP_P in statement STMT. */
-static bool
-vect_debug_stats (struct loop *loop)
+static void
+rename_def_op (def_operand_p op_p, tree stmt)
{
- basic_block bb;
- block_stmt_iterator si;
- tree node = NULL_TREE;
-
- if (!dump_file || !(dump_flags & TDF_STATS))
- return false;
-
- if (!loop)
- {
- fprintf (dump_file, "\n");
- return true;
- }
+ tree *new_name_ptr;
- if (!loop->header)
- return false;
+ if (TREE_CODE (DEF_FROM_PTR (op_p)) != SSA_NAME)
+ return;
- bb = loop->header;
+ new_name_ptr = SSA_NAME_AUX (DEF_FROM_PTR (op_p));
- for (si = bsi_start (bb); !bsi_end_p (si); bsi_next (&si))
- {
- node = bsi_stmt (si);
- if (node && EXPR_P (node) && EXPR_LOCUS (node))
- break;
- }
+ /* Something defined outside of the loop. */
+ if (!new_name_ptr)
+ return;
- if (node && EXPR_P (node) && EXPR_LOCUS (node)
- && EXPR_FILENAME (node) && EXPR_LINENO (node))
- {
- fprintf (dump_file, "\nloop at %s:%d: ",
- EXPR_FILENAME (node), EXPR_LINENO (node));
- return true;
- }
+ /* An ordinary ssa name defined in the loop. */
- return false;
+ SET_DEF (op_p, *new_name_ptr);
+ SSA_NAME_DEF_STMT (DEF_FROM_PTR (op_p)) = stmt;
}
-/* Function debug_loop_details.
-
- For vectorization debug dumps. */
+/* Renames the variables in basic block BB. */
-static bool
-vect_debug_details (struct loop *loop)
+static void
+rename_variables_in_bb (basic_block bb)
{
- basic_block bb;
- block_stmt_iterator si;
- tree node = NULL_TREE;
-
- if (!dump_file || !(dump_flags & TDF_DETAILS))
- return false;
-
- if (!loop)
- {
- fprintf (dump_file, "\n");
- return true;
- }
-
- if (!loop->header)
- return false;
-
- bb = loop->header;
+ tree phi;
+ block_stmt_iterator bsi;
+ tree stmt;
+ stmt_ann_t ann;
+ use_optype uses;
+ vuse_optype vuses;
+ def_optype defs;
+ v_may_def_optype v_may_defs;
+ v_must_def_optype v_must_defs;
+ unsigned i;
+ edge e;
+ edge_iterator ei;
+ struct loop *loop = bb->loop_father;
- for (si = bsi_start (bb); !bsi_end_p (si); bsi_next (&si))
- {
- node = bsi_stmt (si);
- if (node && EXPR_P (node) && EXPR_LOCUS (node))
- break;
- }
+ for (phi = phi_nodes (bb); phi; phi = PHI_CHAIN (phi))
+ rename_def_op (PHI_RESULT_PTR (phi), phi);
- if (node && EXPR_P (node) && EXPR_LOCUS (node)
- && EXPR_FILENAME (node) && EXPR_LINENO (node))
+ for (bsi = bsi_start (bb); !bsi_end_p (bsi); bsi_next (&bsi))
{
- fprintf (dump_file, "\nloop at %s:%d: ",
- EXPR_FILENAME (node), EXPR_LINENO (node));
- return true;
- }
-
- return false;
-}
-
-
-/* Function vect_get_ptr_offset
-
- Compute the OFFSET modulo vector-type alignment of pointer REF in bits. */
-
-static tree
-vect_get_ptr_offset (tree ref ATTRIBUTE_UNUSED,
- tree vectype ATTRIBUTE_UNUSED,
- tree *offset ATTRIBUTE_UNUSED)
-{
- /* TODO: Use alignment information. */
- return NULL_TREE;
-}
-
-
-/* Function vect_get_base_and_bit_offset
+ stmt = bsi_stmt (bsi);
+ get_stmt_operands (stmt);
+ ann = stmt_ann (stmt);
- Return the BASE of the data reference EXPR.
- If VECTYPE is given, also compute the OFFSET from BASE in bits.
- E.g., for EXPR a.b[i] + 4B, BASE is a, and OFFSET is the overall offset in
- bits of 'a.b[i] + 4B' from a.
+ uses = USE_OPS (ann);
+ for (i = 0; i < NUM_USES (uses); i++)
+ rename_use_op (USE_OP_PTR (uses, i));
- Input:
- EXPR - the memory reference that is being analyzed
- DR - the data_reference struct of the _original_ memory reference
- (Note: DR_REF (DR) is not necessarily EXPR)
- VECTYPE - the type that defines the alignment (i.e, we compute
- alignment relative to TYPE_ALIGN(VECTYPE))
-
- Output:
- BASE (returned value) - the base of the data reference EXPR.
- E.g, if EXPR is a.b[k].c[i][j] the returned
- base is a.
- OFFSET - offset of EXPR from BASE in bits
- BASE_ALIGNED_P - indicates if BASE is aligned
-
- If something unexpected is encountered (an unsupported form of data-ref),
- or if VECTYPE is given but OFFSET cannot be determined:
- then NULL_TREE is returned. */
-
-static tree
-vect_get_base_and_bit_offset (struct data_reference *dr,
- tree expr,
- tree vectype,
- loop_vec_info loop_vinfo,
- tree *offset,
- bool *base_aligned_p)
-{
- tree this_offset = size_zero_node;
- tree base = NULL_TREE;
- tree next_ref;
- tree oprnd0, oprnd1;
- struct data_reference *array_dr;
- enum tree_code code = TREE_CODE (expr);
+ defs = DEF_OPS (ann);
+ for (i = 0; i < NUM_DEFS (defs); i++)
+ rename_def_op (DEF_OP_PTR (defs, i), stmt);
- *base_aligned_p = false;
+ vuses = VUSE_OPS (ann);
+ for (i = 0; i < NUM_VUSES (vuses); i++)
+ rename_use_op (VUSE_OP_PTR (vuses, i));
- switch (code)
- {
- /* These cases end the recursion: */
- case VAR_DECL:
- *offset = size_zero_node;
- if (vectype && DECL_ALIGN (expr) >= TYPE_ALIGN (vectype))
- *base_aligned_p = true;
- return expr;
-
- case SSA_NAME:
- if (!vectype)
- return expr;
-
- if (TREE_CODE (TREE_TYPE (expr)) != POINTER_TYPE)
- return NULL_TREE;
-
- if (TYPE_ALIGN (TREE_TYPE (TREE_TYPE (expr))) < TYPE_ALIGN (vectype))
+ v_may_defs = V_MAY_DEF_OPS (ann);
+ for (i = 0; i < NUM_V_MAY_DEFS (v_may_defs); i++)
{
- base = vect_get_ptr_offset (expr, vectype, offset);
- if (base)
- *base_aligned_p = true;
- }
- else
- {
- *base_aligned_p = true;
- *offset = size_zero_node;
- base = expr;
+ rename_use_op (V_MAY_DEF_OP_PTR (v_may_defs, i));
+ rename_def_op (V_MAY_DEF_RESULT_PTR (v_may_defs, i), stmt);
}
- return base;
-
- case INTEGER_CST:
- *offset = int_const_binop (MULT_EXPR, expr,
- build_int_cst (NULL_TREE, BITS_PER_UNIT), 1);
- return expr;
-
- /* These cases continue the recursion: */
- case COMPONENT_REF:
- oprnd0 = TREE_OPERAND (expr, 0);
- oprnd1 = TREE_OPERAND (expr, 1);
-
- this_offset = bit_position (oprnd1);
- if (vectype && !host_integerp (this_offset, 1))
- return NULL_TREE;
- next_ref = oprnd0;
- break;
-
- case ADDR_EXPR:
- oprnd0 = TREE_OPERAND (expr, 0);
- next_ref = oprnd0;
- break;
-
- case INDIRECT_REF:
- oprnd0 = TREE_OPERAND (expr, 0);
- next_ref = oprnd0;
- break;
-
- case ARRAY_REF:
- if (DR_REF (dr) != expr)
- /* Build array data_reference struct if the existing DR_REF
- doesn't match EXPR. This happens, for example, when the
- EXPR is *T and T is initialized to &arr[indx]. The DR struct
- contains information on the access of T, not of arr. In order
- to continue the analysis, we create a new DR struct that
- describes the access of arr.
- */
- array_dr = analyze_array (DR_STMT (dr), expr, DR_IS_READ (dr));
- else
- array_dr = dr;
-
- next_ref = vect_compute_array_ref_alignment (array_dr, loop_vinfo,
- vectype, &this_offset);
- if (!next_ref)
- return NULL_TREE;
- if (vectype &&
- TYPE_ALIGN (TREE_TYPE (TREE_TYPE (next_ref))) >= TYPE_ALIGN (vectype))
+ v_must_defs = V_MUST_DEF_OPS (ann);
+ for (i = 0; i < NUM_V_MUST_DEFS (v_must_defs); i++)
{
- *offset = this_offset;
- *base_aligned_p = true;
- return next_ref;
+ rename_use_op (V_MUST_DEF_KILL_PTR (v_must_defs, i));
+ rename_def_op (V_MUST_DEF_RESULT_PTR (v_must_defs, i), stmt);
}
- break;
-
- case PLUS_EXPR:
- case MINUS_EXPR:
- /* In case we have a PLUS_EXPR of the form
- (oprnd0 + oprnd1), we assume that only oprnd0 determines the base.
- This is verified in vect_get_symbl_and_dr. */
- oprnd0 = TREE_OPERAND (expr, 0);
- oprnd1 = TREE_OPERAND (expr, 1);
-
- base = vect_get_base_and_bit_offset
- (dr, oprnd1, vectype, loop_vinfo, &this_offset, base_aligned_p);
- if (vectype && !base)
- return NULL_TREE;
-
- next_ref = oprnd0;
- break;
-
- default:
- return NULL_TREE;
}
- base = vect_get_base_and_bit_offset (dr, next_ref, vectype,
- loop_vinfo, offset, base_aligned_p);
-
- if (vectype && base)
- {
- *offset = int_const_binop (PLUS_EXPR, *offset, this_offset, 1);
- if (!host_integerp (*offset, 1) || TREE_OVERFLOW (*offset))
- return NULL_TREE;
-
- if (vect_debug_details (NULL))
- {
- print_generic_expr (dump_file, expr, TDF_SLIM);
- fprintf (dump_file, " --> total offset for ref: ");
- print_generic_expr (dump_file, *offset, TDF_SLIM);
- }
- }
- return base;
-}
-
-
-
-/* Function vect_force_dr_alignment_p.
-
- Returns whether the alignment of a DECL can be forced to be aligned
- on ALIGNMENT bit boundary. */
-
-static bool
-vect_can_force_dr_alignment_p (tree decl, unsigned int alignment)
-{
- if (TREE_CODE (decl) != VAR_DECL)
- return false;
-
- if (DECL_EXTERNAL (decl))
- return false;
-
- if (TREE_STATIC (decl))
- return (alignment <= MAX_OFILE_ALIGNMENT);
- else
- /* This is not 100% correct. The absolute correct stack alignment
- is STACK_BOUNDARY. We're supposed to hope, but not assume, that
- PREFERRED_STACK_BOUNDARY is honored by all translation units.
- However, until someone implements forced stack alignment, SSE
- isn't really usable without this. */
- return (alignment <= PREFERRED_STACK_BOUNDARY);
-}
-
-
-/* Function vect_get_new_vect_var.
-
- Returns a name for a new variable. The current naming scheme appends the
- prefix "vect_" or "vect_p" (depending on the value of VAR_KIND) to
- the name of vectorizer generated variables, and appends that to NAME if
- provided. */
-
-static tree
-vect_get_new_vect_var (tree type, enum vect_var_kind var_kind, const char *name)
-{
- const char *prefix;
- int prefix_len;
- tree new_vect_var;
-
- if (var_kind == vect_simple_var)
- prefix = "vect_";
- else
- prefix = "vect_p";
-
- prefix_len = strlen (prefix);
-
- if (name)
- new_vect_var = create_tmp_var (type, concat (prefix, name, NULL));
- else
- new_vect_var = create_tmp_var (type, prefix);
-
- return new_vect_var;
-}
-
-
-/* Function vect_create_index_for_vector_ref.
-
- Create (and return) an index variable, along with it's update chain in the
- loop. This variable will be used to access a memory location in a vector
- operation.
-
- Input:
- LOOP: The loop being vectorized.
- BSI: The block_stmt_iterator where STMT is. Any new stmts created by this
- function can be added here, or in the loop pre-header.
-
- Output:
- Return an index that will be used to index a vector array. It is expected
- that a pointer to the first vector will be used as the base address for the
- indexed reference.
-
- FORNOW: we are not trying to be efficient, just creating a new index each
- time from scratch. At this time all vector references could use the same
- index.
-
- TODO: create only one index to be used by all vector references. Record
- the index in the LOOP_VINFO the first time this procedure is called and
- return it on subsequent calls. The increment of this index must be placed
- just before the conditional expression that ends the single block loop. */
-
-static tree
-vect_create_index_for_vector_ref (struct loop *loop, block_stmt_iterator *bsi)
-{
- tree init, step;
- tree indx_before_incr, indx_after_incr;
-
- /* It is assumed that the base pointer used for vectorized access contains
- the address of the first vector. Therefore the index used for vectorized
- access must be initialized to zero and incremented by 1. */
-
- init = integer_zero_node;
- step = integer_one_node;
-
- /* Assuming that bsi_insert is used with BSI_NEW_STMT */
- create_iv (init, step, NULL_TREE, loop, bsi, false,
- &indx_before_incr, &indx_after_incr);
-
- return indx_before_incr;
-}
-
-
-/* Function vect_create_addr_base_for_vector_ref.
-
- Create an expression that computes the address of the first memory location
- that will be accessed for a data reference.
-
- Input:
- STMT: The statement containing the data reference.
- NEW_STMT_LIST: Must be initialized to NULL_TREE or a
- statement list.
-
- Output:
- 1. Return an SSA_NAME whose value is the address of the memory location of the
- first vector of the data reference.
- 2. If new_stmt_list is not NULL_TREE after return then the caller must insert
- these statement(s) which define the returned SSA_NAME.
-
- FORNOW: We are only handling array accesses with step 1. */
-
-static tree
-vect_create_addr_base_for_vector_ref (tree stmt,
- tree *new_stmt_list)
-{
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- struct loop *loop = STMT_VINFO_LOOP (stmt_info);
- struct data_reference *dr = STMT_VINFO_DATA_REF (stmt_info);
- tree data_ref_base = unshare_expr (STMT_VINFO_VECT_DR_BASE (stmt_info));
- tree base_name = unshare_expr (DR_BASE_NAME (dr));
- tree ref = DR_REF (dr);
- tree data_ref_base_type = TREE_TYPE (data_ref_base);
- tree scalar_type = TREE_TYPE (ref);
- tree scalar_ptr_type = build_pointer_type (scalar_type);
- tree access_fn;
- tree init_val, step, init_oval;
- bool ok;
- bool is_ptr_ref, is_array_ref, is_addr_expr;
- tree array_base;
- tree vec_stmt;
- tree new_temp;
- tree array_ref;
- tree addr_base, addr_expr;
- tree dest, new_stmt;
-
- /* Only the access function of the last index is relevant (i_n in
- a[i_1][i_2]...[i_n]), the others correspond to loop invariants. */
- access_fn = DR_ACCESS_FN (dr, 0);
- ok = vect_is_simple_iv_evolution (loop->num, access_fn, &init_oval, &step, true);
- if (!ok)
- init_oval = integer_zero_node;
-
- is_ptr_ref = TREE_CODE (data_ref_base_type) == POINTER_TYPE
- && TREE_CODE (data_ref_base) == SSA_NAME;
- is_array_ref = TREE_CODE (data_ref_base_type) == ARRAY_TYPE
- && (TREE_CODE (data_ref_base) == VAR_DECL
- || TREE_CODE (data_ref_base) == COMPONENT_REF
- || TREE_CODE (data_ref_base) == ARRAY_REF);
- is_addr_expr = TREE_CODE (data_ref_base) == ADDR_EXPR
- || TREE_CODE (data_ref_base) == PLUS_EXPR
- || TREE_CODE (data_ref_base) == MINUS_EXPR;
- gcc_assert (is_ptr_ref || is_array_ref || is_addr_expr);
-
- /** Create: &(base[init_val])
-
- if data_ref_base is an ARRAY_TYPE:
- base = data_ref_base
-
- if data_ref_base is the SSA_NAME of a POINTER_TYPE:
- base = *((scalar_array *) data_ref_base)
- **/
-
- if (is_array_ref)
- array_base = data_ref_base;
- else /* is_ptr_ref or is_addr_expr */
+ FOR_EACH_EDGE (e, ei, bb->succs)
{
- /* array_ptr = (scalar_array_ptr_type *) data_ref_base; */
- tree scalar_array_type = build_array_type (scalar_type, 0);
- tree scalar_array_ptr_type = build_pointer_type (scalar_array_type);
- tree array_ptr = create_tmp_var (scalar_array_ptr_type, "array_ptr");
- add_referenced_tmp_var (array_ptr);
-
- dest = create_tmp_var (TREE_TYPE (data_ref_base), "dataref");
- add_referenced_tmp_var (dest);
- data_ref_base = force_gimple_operand (data_ref_base, &new_stmt, false, dest);
- append_to_statement_list_force (new_stmt, new_stmt_list);
-
- vec_stmt = fold_convert (scalar_array_ptr_type, data_ref_base);
- vec_stmt = build2 (MODIFY_EXPR, void_type_node, array_ptr, vec_stmt);
- new_temp = make_ssa_name (array_ptr, vec_stmt);
- TREE_OPERAND (vec_stmt, 0) = new_temp;
- append_to_statement_list_force (vec_stmt, new_stmt_list);
-
- /* (*array_ptr) */
- array_base = build_fold_indirect_ref (new_temp);
+ if (!flow_bb_inside_loop_p (loop, e->dest))
+ continue;
+ for (phi = phi_nodes (e->dest); phi; phi = PHI_CHAIN (phi))
+ rename_use_op (PHI_ARG_DEF_PTR_FROM_EDGE (phi, e));
}
+}
- dest = create_tmp_var (TREE_TYPE (init_oval), "newinit");
- add_referenced_tmp_var (dest);
- init_val = force_gimple_operand (init_oval, &new_stmt, false, dest);
- append_to_statement_list_force (new_stmt, new_stmt_list);
-
- array_ref = build4 (ARRAY_REF, scalar_type, array_base, init_val,
- NULL_TREE, NULL_TREE);
- addr_base = build_fold_addr_expr (array_ref);
-
- /* addr_expr = addr_base */
- addr_expr = vect_get_new_vect_var (scalar_ptr_type, vect_pointer_var,
- get_name (base_name));
- add_referenced_tmp_var (addr_expr);
- vec_stmt = build2 (MODIFY_EXPR, void_type_node, addr_expr, addr_base);
- new_temp = make_ssa_name (addr_expr, vec_stmt);
- TREE_OPERAND (vec_stmt, 0) = new_temp;
- append_to_statement_list_force (vec_stmt, new_stmt_list);
- return new_temp;
-}
-
-
-/* Function get_vectype_for_scalar_type.
-
- Returns the vector type corresponding to SCALAR_TYPE as supported
- by the target. */
-
-static tree
-get_vectype_for_scalar_type (tree scalar_type)
-{
- enum machine_mode inner_mode = TYPE_MODE (scalar_type);
- int nbytes = GET_MODE_SIZE (inner_mode);
- int nunits;
- tree vectype;
-
- if (nbytes == 0)
- return NULL_TREE;
-
- /* FORNOW: Only a single vector size per target (UNITS_PER_SIMD_WORD)
- is expected. */
- nunits = UNITS_PER_SIMD_WORD / nbytes;
-
- vectype = build_vector_type (scalar_type, nunits);
- if (TYPE_MODE (vectype) == BLKmode)
- return NULL_TREE;
- return vectype;
-}
-
-
-/* Function vect_align_data_ref.
-
- Handle mislignment of a memory accesses.
-
- FORNOW: Can't handle misaligned accesses.
- Make sure that the dataref is aligned. */
-
-static void
-vect_align_data_ref (tree stmt)
-{
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- struct data_reference *dr = STMT_VINFO_DATA_REF (stmt_info);
-
- /* FORNOW: can't handle misaligned accesses;
- all accesses expected to be aligned. */
- gcc_assert (aligned_access_p (dr));
-}
-
-
-/* Function vect_create_data_ref.
-
- Create a memory reference expression for vector access, to be used in a
- vector load/store stmt.
-
- Input:
- STMT: a stmt that references memory. expected to be of the form
- MODIFY_EXPR <name, data-ref> or MODIFY_EXPR <data-ref, name>.
- BSI: block_stmt_iterator where new stmts can be added.
-
- Output:
- 1. Declare a new ptr to vector_type, and have it point to the array base.
- For example, for vector of type V8HI:
- v8hi *p0;
- p0 = (v8hi *)&a;
- 2. Create a data-reference based on the new vector pointer p0, and using
- a new index variable 'idx'. Return the expression '(*p0)[idx]'.
-
- FORNOW: handle only aligned and consecutive accesses. */
-
-static tree
-vect_create_data_ref (tree stmt, block_stmt_iterator *bsi)
-{
- tree base_name, data_ref_base, data_ref_base_type;
- tree array_type;
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- struct data_reference *dr = STMT_VINFO_DATA_REF (stmt_info);
- struct loop *loop = STMT_VINFO_LOOP (stmt_info);
- tree vectype = STMT_VINFO_VECTYPE (stmt_info);
- tree vect_ptr_type;
- tree vect_ptr;
- tree tag;
- v_may_def_optype v_may_defs = STMT_V_MAY_DEF_OPS (stmt);
- v_must_def_optype v_must_defs = STMT_V_MUST_DEF_OPS (stmt);
- vuse_optype vuses = STMT_VUSE_OPS (stmt);
- int nvuses, nv_may_defs, nv_must_defs;
- int i;
- tree new_temp;
- tree vec_stmt;
- tree new_stmt_list = NULL_TREE;
- tree idx;
- tree new_base;
- tree data_ref;
- edge pe;
- basic_block new_bb;
-
- /* FORNOW: make sure the data reference is aligned. */
- vect_align_data_ref (stmt);
-
- base_name = unshare_expr (DR_BASE_NAME (dr));
- data_ref_base = STMT_VINFO_VECT_DR_BASE (stmt_info);
- data_ref_base_type = TREE_TYPE (data_ref_base);
-
- array_type = build_array_type (vectype, 0);
- TYPE_ALIGN (array_type) = TYPE_ALIGN (data_ref_base_type);
- vect_ptr_type = build_pointer_type (array_type);
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "create array_ref of type: ");
- print_generic_expr (dump_file, vectype, TDF_SLIM);
- }
-
- /* Create: vectype *p; */
- vect_ptr = vect_get_new_vect_var (vect_ptr_type, vect_pointer_var,
- get_name (base_name));
- add_referenced_tmp_var (vect_ptr);
-
- if (vect_debug_details (NULL))
- {
- if (TREE_CODE (data_ref_base) == VAR_DECL)
- fprintf (dump_file, "vectorizing a one dimensional array ref: ");
- else if (TREE_CODE (data_ref_base) == ARRAY_REF)
- fprintf (dump_file, "vectorizing a multidimensional array ref: ");
- else if (TREE_CODE (data_ref_base) == COMPONENT_REF)
- fprintf (dump_file, "vectorizing a record based array ref: ");
- else if (TREE_CODE (data_ref_base) == SSA_NAME)
- fprintf (dump_file, "vectorizing a pointer ref: ");
- else if (TREE_CODE (data_ref_base) == ADDR_EXPR
- || TREE_CODE (data_ref_base) == PLUS_EXPR
- || TREE_CODE (data_ref_base) == MINUS_EXPR)
- fprintf (dump_file, "vectorizing an address expr: ");
- print_generic_expr (dump_file, base_name, TDF_SLIM);
- }
-
- /* Handle aliasing: */
- tag = STMT_VINFO_MEMTAG (stmt_info);
- gcc_assert (tag);
- get_var_ann (vect_ptr)->type_mem_tag = tag;
-
- /* Mark for renaming all aliased variables
- (i.e, the may-aliases of the type-mem-tag). */
- nvuses = NUM_VUSES (vuses);
- nv_may_defs = NUM_V_MAY_DEFS (v_may_defs);
- nv_must_defs = NUM_V_MUST_DEFS (v_must_defs);
- for (i = 0; i < nvuses; i++)
- {
- tree use = VUSE_OP (vuses, i);
- if (TREE_CODE (use) == SSA_NAME)
- bitmap_set_bit (vars_to_rename, var_ann (SSA_NAME_VAR (use))->uid);
- }
- for (i = 0; i < nv_may_defs; i++)
- {
- tree def = V_MAY_DEF_RESULT (v_may_defs, i);
- if (TREE_CODE (def) == SSA_NAME)
- bitmap_set_bit (vars_to_rename, var_ann (SSA_NAME_VAR (def))->uid);
- }
- for (i = 0; i < nv_must_defs; i++)
- {
- tree def = V_MUST_DEF_OP (v_must_defs, i);
- if (TREE_CODE (def) == SSA_NAME)
- bitmap_set_bit (vars_to_rename, var_ann (SSA_NAME_VAR (def))->uid);
- }
-
- pe = loop_preheader_edge (loop);
-
- /* Create: (&(base[init_val]) */
- new_temp = vect_create_addr_base_for_vector_ref (stmt, &new_stmt_list);
-
- pe = loop_preheader_edge (loop);
- new_bb = bsi_insert_on_edge_immediate (pe, new_stmt_list);
- gcc_assert (!new_bb);
-
- /* p = (vectype_array *) addr_base */
- vec_stmt = fold_convert (vect_ptr_type, new_temp);
- vec_stmt = build2 (MODIFY_EXPR, void_type_node, vect_ptr, vec_stmt);
- new_temp = make_ssa_name (vect_ptr, vec_stmt);
- TREE_OPERAND (vec_stmt, 0) = new_temp;
- new_bb = bsi_insert_on_edge_immediate (pe, vec_stmt);
- gcc_assert (!new_bb);
-
- /*** create data ref: '(*p)[idx]' ***/
- idx = vect_create_index_for_vector_ref (loop, bsi);
- new_base = build_fold_indirect_ref (new_temp);
- data_ref = build4 (ARRAY_REF, vectype, new_base, idx, NULL_TREE, NULL_TREE);
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "created new data-ref: ");
- print_generic_expr (dump_file, data_ref, TDF_SLIM);
- }
-
- return data_ref;
-}
-
-
-/* Function vect_create_destination_var.
-
- Create a new temporary of type VECTYPE. */
-
-static tree
-vect_create_destination_var (tree scalar_dest, tree vectype)
-{
- tree vec_dest;
- const char *new_name;
-
- gcc_assert (TREE_CODE (scalar_dest) == SSA_NAME);
-
- new_name = get_name (scalar_dest);
- if (!new_name)
- new_name = "var_";
- vec_dest = vect_get_new_vect_var (vectype, vect_simple_var, new_name);
- add_referenced_tmp_var (vec_dest);
-
- return vec_dest;
-}
-
-
-/* Function vect_init_vector.
-
- Insert a new stmt (INIT_STMT) that initializes a new vector variable with
- the vector elements of VECTOR_VAR. Return the DEF of INIT_STMT. It will be
- used in the vectorization of STMT. */
-
-static tree
-vect_init_vector (tree stmt, tree vector_var)
-{
- stmt_vec_info stmt_vinfo = vinfo_for_stmt (stmt);
- struct loop *loop = STMT_VINFO_LOOP (stmt_vinfo);
- tree new_var;
- tree init_stmt;
- tree vectype = STMT_VINFO_VECTYPE (stmt_vinfo);
- tree vec_oprnd;
- edge pe;
- tree new_temp;
- basic_block new_bb;
-
- new_var = vect_get_new_vect_var (vectype, vect_simple_var, "cst_");
- add_referenced_tmp_var (new_var);
-
- init_stmt = build2 (MODIFY_EXPR, vectype, new_var, vector_var);
- new_temp = make_ssa_name (new_var, init_stmt);
- TREE_OPERAND (init_stmt, 0) = new_temp;
-
- pe = loop_preheader_edge (loop);
- new_bb = bsi_insert_on_edge_immediate (pe, init_stmt);
- gcc_assert (!new_bb);
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "created new init_stmt: ");
- print_generic_expr (dump_file, init_stmt, TDF_SLIM);
- }
-
- vec_oprnd = TREE_OPERAND (init_stmt, 0);
- return vec_oprnd;
-}
-
-
-/* Function vect_get_vec_def_for_operand.
-
- OP is an operand in STMT. This function returns a (vector) def that will be
- used in the vectorized stmt for STMT.
-
- In the case that OP is an SSA_NAME which is defined in the loop, then
- STMT_VINFO_VEC_STMT of the defining stmt holds the relevant def.
-
- In case OP is an invariant or constant, a new stmt that creates a vector def
- needs to be introduced. */
-
-static tree
-vect_get_vec_def_for_operand (tree op, tree stmt)
-{
- tree vec_oprnd;
- tree vec_stmt;
- tree def_stmt;
- stmt_vec_info def_stmt_info = NULL;
- stmt_vec_info stmt_vinfo = vinfo_for_stmt (stmt);
- tree vectype = STMT_VINFO_VECTYPE (stmt_vinfo);
- int nunits = GET_MODE_NUNITS (TYPE_MODE (vectype));
- struct loop *loop = STMT_VINFO_LOOP (stmt_vinfo);
- basic_block bb;
- tree vec_inv;
- tree t = NULL_TREE;
- tree def;
- int i;
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "vect_get_vec_def_for_operand: ");
- print_generic_expr (dump_file, op, TDF_SLIM);
- }
-
- /** ===> Case 1: operand is a constant. **/
-
- if (TREE_CODE (op) == INTEGER_CST || TREE_CODE (op) == REAL_CST)
- {
- /* Create 'vect_cst_ = {cst,cst,...,cst}' */
-
- tree vec_cst;
- stmt_vec_info stmt_vinfo = vinfo_for_stmt (stmt);
- tree vectype = STMT_VINFO_VECTYPE (stmt_vinfo);
- int nunits = GET_MODE_NUNITS (TYPE_MODE (vectype));
- tree t = NULL_TREE;
- int i;
-
- /* Build a tree with vector elements. */
- if (vect_debug_details (NULL))
- fprintf (dump_file, "Create vector_cst. nunits = %d", nunits);
-
- for (i = nunits - 1; i >= 0; --i)
- {
- t = tree_cons (NULL_TREE, op, t);
- }
- vec_cst = build_vector (vectype, t);
- return vect_init_vector (stmt, vec_cst);
- }
-
- gcc_assert (TREE_CODE (op) == SSA_NAME);
-
- /** ===> Case 2: operand is an SSA_NAME - find the stmt that defines it. **/
-
- def_stmt = SSA_NAME_DEF_STMT (op);
- def_stmt_info = vinfo_for_stmt (def_stmt);
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "vect_get_vec_def_for_operand: def_stmt: ");
- print_generic_expr (dump_file, def_stmt, TDF_SLIM);
- }
-
-
- /** ==> Case 2.1: operand is defined inside the loop. **/
-
- if (def_stmt_info)
- {
- /* Get the def from the vectorized stmt. */
-
- vec_stmt = STMT_VINFO_VEC_STMT (def_stmt_info);
- gcc_assert (vec_stmt);
- vec_oprnd = TREE_OPERAND (vec_stmt, 0);
- return vec_oprnd;
- }
-
-
- /** ==> Case 2.2: operand is defined by the loop-header phi-node -
- it is a reduction/induction. **/
-
- bb = bb_for_stmt (def_stmt);
- if (TREE_CODE (def_stmt) == PHI_NODE && flow_bb_inside_loop_p (loop, bb))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "reduction/induction - unsupported.");
- internal_error ("no support for reduction/induction"); /* FORNOW */
- }
-
-
- /** ==> Case 2.3: operand is defined outside the loop -
- it is a loop invariant. */
-
- switch (TREE_CODE (def_stmt))
- {
- case PHI_NODE:
- def = PHI_RESULT (def_stmt);
- break;
- case MODIFY_EXPR:
- def = TREE_OPERAND (def_stmt, 0);
- break;
- case NOP_EXPR:
- def = TREE_OPERAND (def_stmt, 0);
- gcc_assert (IS_EMPTY_STMT (def_stmt));
- def = op;
- break;
- default:
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "unsupported defining stmt: ");
- print_generic_expr (dump_file, def_stmt, TDF_SLIM);
- }
- internal_error ("unsupported defining stmt");
- }
-
- /* Build a tree with vector elements. Create 'vec_inv = {inv,inv,..,inv}' */
-
- if (vect_debug_details (NULL))
- fprintf (dump_file, "Create vector_inv.");
-
- for (i = nunits - 1; i >= 0; --i)
- {
- t = tree_cons (NULL_TREE, def, t);
- }
-
- vec_inv = build_constructor (vectype, t);
- return vect_init_vector (stmt, vec_inv);
-}
-
-
-/* Function vect_finish_stmt_generation.
-
- Insert a new stmt. */
-
-static void
-vect_finish_stmt_generation (tree stmt, tree vec_stmt, block_stmt_iterator *bsi)
-{
- bsi_insert_before (bsi, vec_stmt, BSI_SAME_STMT);
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "add new stmt: ");
- print_generic_expr (dump_file, vec_stmt, TDF_SLIM);
- }
-
- /* Make sure bsi points to the stmt that is being vectorized. */
-
- /* Assumption: any stmts created for the vectorization of smtmt S are
- inserted before S. BSI may point to S or some new stmt before it. */
-
- while (stmt != bsi_stmt (*bsi) && !bsi_end_p (*bsi))
- bsi_next (bsi);
- gcc_assert (stmt == bsi_stmt (*bsi));
-}
-
-
-/* Function vectorizable_assignment.
-
- Check if STMT performs an assignment (copy) that can be vectorized.
- If VEC_STMT is also passed, vectorize the STMT: create a vectorized
- stmt to replace it, put it in VEC_STMT, and insert it at BSI.
- Return FALSE if not a vectorizable STMT, TRUE otherwise. */
-
-static bool
-vectorizable_assignment (tree stmt, block_stmt_iterator *bsi, tree *vec_stmt)
-{
- tree vec_dest;
- tree scalar_dest;
- tree op;
- tree vec_oprnd;
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- tree vectype = STMT_VINFO_VECTYPE (stmt_info);
- struct loop *loop = STMT_VINFO_LOOP (stmt_info);
- tree new_temp;
-
- /* Is vectorizable assignment? */
-
- if (TREE_CODE (stmt) != MODIFY_EXPR)
- return false;
-
- scalar_dest = TREE_OPERAND (stmt, 0);
- if (TREE_CODE (scalar_dest) != SSA_NAME)
- return false;
-
- op = TREE_OPERAND (stmt, 1);
- if (!vect_is_simple_use (op, loop, NULL))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "use not simple.");
- return false;
- }
-
- if (!vec_stmt) /* transformation not required. */
- {
- STMT_VINFO_TYPE (stmt_info) = assignment_vec_info_type;
- return true;
- }
-
- /** Trasform. **/
- if (vect_debug_details (NULL))
- fprintf (dump_file, "transform assignment.");
-
- /* Handle def. */
- vec_dest = vect_create_destination_var (scalar_dest, vectype);
-
- /* Handle use. */
- op = TREE_OPERAND (stmt, 1);
- vec_oprnd = vect_get_vec_def_for_operand (op, stmt);
-
- /* Arguments are ready. create the new vector stmt. */
- *vec_stmt = build2 (MODIFY_EXPR, vectype, vec_dest, vec_oprnd);
- new_temp = make_ssa_name (vec_dest, *vec_stmt);
- TREE_OPERAND (*vec_stmt, 0) = new_temp;
- vect_finish_stmt_generation (stmt, *vec_stmt, bsi);
-
- return true;
-}
-
-
-/* Function vectorizable_operation.
-
- Check if STMT performs a binary or unary operation that can be vectorized.
- If VEC_STMT is also passed, vectorize the STMT: create a vectorized
- stmt to replace it, put it in VEC_STMT, and insert it at BSI.
- Return FALSE if not a vectorizable STMT, TRUE otherwise. */
-
-static bool
-vectorizable_operation (tree stmt, block_stmt_iterator *bsi, tree *vec_stmt)
-{
- tree vec_dest;
- tree scalar_dest;
- tree operation;
- tree op0, op1 = NULL;
- tree vec_oprnd0, vec_oprnd1=NULL;
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- tree vectype = STMT_VINFO_VECTYPE (stmt_info);
- struct loop *loop = STMT_VINFO_LOOP (stmt_info);
- int i;
- enum tree_code code;
- enum machine_mode vec_mode;
- tree new_temp;
- int op_type;
- tree op;
- optab optab;
-
- /* Is STMT a vectorizable binary/unary operation? */
- if (TREE_CODE (stmt) != MODIFY_EXPR)
- return false;
-
- if (TREE_CODE (TREE_OPERAND (stmt, 0)) != SSA_NAME)
- return false;
-
- operation = TREE_OPERAND (stmt, 1);
- code = TREE_CODE (operation);
- optab = optab_for_tree_code (code, vectype);
-
- /* Support only unary or binary operations. */
- op_type = TREE_CODE_LENGTH (code);
- if (op_type != unary_op && op_type != binary_op)
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "num. args = %d (not unary/binary op).", op_type);
- return false;
- }
-
- for (i = 0; i < op_type; i++)
- {
- op = TREE_OPERAND (operation, i);
- if (!vect_is_simple_use (op, loop, NULL))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "use not simple.");
- return false;
- }
- }
-
- /* Supportable by target? */
- if (!optab)
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "no optab.");
- return false;
- }
- vec_mode = TYPE_MODE (vectype);
- if (optab->handlers[(int) vec_mode].insn_code == CODE_FOR_nothing)
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "op not supported by target.");
- return false;
- }
-
- if (!vec_stmt) /* transformation not required. */
- {
- STMT_VINFO_TYPE (stmt_info) = op_vec_info_type;
- return true;
- }
-
- /** Trasform. **/
-
- if (vect_debug_details (NULL))
- fprintf (dump_file, "transform binary/unary operation.");
-
- /* Handle def. */
- scalar_dest = TREE_OPERAND (stmt, 0);
- vec_dest = vect_create_destination_var (scalar_dest, vectype);
-
- /* Handle uses. */
- op0 = TREE_OPERAND (operation, 0);
- vec_oprnd0 = vect_get_vec_def_for_operand (op0, stmt);
-
- if (op_type == binary_op)
- {
- op1 = TREE_OPERAND (operation, 1);
- vec_oprnd1 = vect_get_vec_def_for_operand (op1, stmt);
- }
-
- /* Arguments are ready. create the new vector stmt. */
-
- if (op_type == binary_op)
- *vec_stmt = build2 (MODIFY_EXPR, vectype, vec_dest,
- build2 (code, vectype, vec_oprnd0, vec_oprnd1));
- else
- *vec_stmt = build2 (MODIFY_EXPR, vectype, vec_dest,
- build1 (code, vectype, vec_oprnd0));
- new_temp = make_ssa_name (vec_dest, *vec_stmt);
- TREE_OPERAND (*vec_stmt, 0) = new_temp;
- vect_finish_stmt_generation (stmt, *vec_stmt, bsi);
-
- return true;
-}
-
-
-/* Function vectorizable_store.
-
- Check if STMT defines a non scalar data-ref (array/pointer/structure) that
- can be vectorized.
- If VEC_STMT is also passed, vectorize the STMT: create a vectorized
- stmt to replace it, put it in VEC_STMT, and insert it at BSI.
- Return FALSE if not a vectorizable STMT, TRUE otherwise. */
-
-static bool
-vectorizable_store (tree stmt, block_stmt_iterator *bsi, tree *vec_stmt)
-{
- tree scalar_dest;
- tree data_ref;
- tree op;
- tree vec_oprnd1;
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- tree vectype = STMT_VINFO_VECTYPE (stmt_info);
- struct loop *loop = STMT_VINFO_LOOP (stmt_info);
- enum machine_mode vec_mode;
-
- /* Is vectorizable store? */
-
- if (TREE_CODE (stmt) != MODIFY_EXPR)
- return false;
-
- scalar_dest = TREE_OPERAND (stmt, 0);
- if (TREE_CODE (scalar_dest) != ARRAY_REF
- && TREE_CODE (scalar_dest) != INDIRECT_REF)
- return false;
-
- op = TREE_OPERAND (stmt, 1);
- if (!vect_is_simple_use (op, loop, NULL))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "use not simple.");
- return false;
- }
-
- vec_mode = TYPE_MODE (vectype);
- /* FORNOW. In some cases can vectorize even if data-type not supported
- (e.g. - array initialization with 0). */
- if (mov_optab->handlers[(int)vec_mode].insn_code == CODE_FOR_nothing)
- return false;
-
- if (!STMT_VINFO_DATA_REF (stmt_info))
- return false;
-
- if (!vec_stmt) /* transformation not required. */
- {
- STMT_VINFO_TYPE (stmt_info) = store_vec_info_type;
- return true;
- }
-
- /** Trasform. **/
-
- if (vect_debug_details (NULL))
- fprintf (dump_file, "transform store");
-
- /* Handle use - get the vectorized def from the defining stmt. */
- vec_oprnd1 = vect_get_vec_def_for_operand (op, stmt);
-
- /* Handle def. */
- data_ref = vect_create_data_ref (stmt, bsi);
-
- /* Arguments are ready. create the new vector stmt. */
- *vec_stmt = build2 (MODIFY_EXPR, vectype, data_ref, vec_oprnd1);
- vect_finish_stmt_generation (stmt, *vec_stmt, bsi);
-
- return true;
-}
-
-
-/* vectorizable_load.
-
- Check if STMT reads a non scalar data-ref (array/pointer/structure) that
- can be vectorized.
- If VEC_STMT is also passed, vectorize the STMT: create a vectorized
- stmt to replace it, put it in VEC_STMT, and insert it at BSI.
- Return FALSE if not a vectorizable STMT, TRUE otherwise. */
-
-static bool
-vectorizable_load (tree stmt, block_stmt_iterator *bsi, tree *vec_stmt)
-{
- tree scalar_dest;
- tree vec_dest = NULL;
- tree data_ref = NULL;
- tree op;
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- tree vectype = STMT_VINFO_VECTYPE (stmt_info);
- tree new_temp;
- enum machine_mode vec_mode;
-
- /* Is vectorizable load? */
-
- if (TREE_CODE (stmt) != MODIFY_EXPR)
- return false;
-
- scalar_dest = TREE_OPERAND (stmt, 0);
- if (TREE_CODE (scalar_dest) != SSA_NAME)
- return false;
-
- op = TREE_OPERAND (stmt, 1);
- if (TREE_CODE (op) != ARRAY_REF && TREE_CODE (op) != INDIRECT_REF)
- return false;
-
- if (!STMT_VINFO_DATA_REF (stmt_info))
- return false;
-
- vec_mode = TYPE_MODE (vectype);
- /* FORNOW. In some cases can vectorize even if data-type not supported
- (e.g. - data copies). */
- if (mov_optab->handlers[(int)vec_mode].insn_code == CODE_FOR_nothing)
- return false;
-
- if (!vec_stmt) /* transformation not required. */
- {
- STMT_VINFO_TYPE (stmt_info) = load_vec_info_type;
- return true;
- }
-
- /** Trasform. **/
-
- if (vect_debug_details (NULL))
- fprintf (dump_file, "transform load.");
-
- /* Handle def. */
- vec_dest = vect_create_destination_var (scalar_dest, vectype);
-
- /* Handle use. */
- op = TREE_OPERAND (stmt, 1);
- data_ref = vect_create_data_ref (stmt, bsi);
-
- /* Arguments are ready. create the new vector stmt. */
- *vec_stmt = build2 (MODIFY_EXPR, vectype, vec_dest, data_ref);
- new_temp = make_ssa_name (vec_dest, *vec_stmt);
- TREE_OPERAND (*vec_stmt, 0) = new_temp;
- vect_finish_stmt_generation (stmt, *vec_stmt, bsi);
-
- return true;
-}
-
-
-/* Function vect_transform_stmt.
-
- Create a vectorized stmt to replace STMT, and insert it at BSI. */
-
-static bool
-vect_transform_stmt (tree stmt, block_stmt_iterator *bsi)
-{
- bool is_store = false;
- tree vec_stmt = NULL_TREE;
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- bool done;
-
- switch (STMT_VINFO_TYPE (stmt_info))
- {
- case op_vec_info_type:
- done = vectorizable_operation (stmt, bsi, &vec_stmt);
- gcc_assert (done);
- break;
-
- case assignment_vec_info_type:
- done = vectorizable_assignment (stmt, bsi, &vec_stmt);
- gcc_assert (done);
- break;
-
- case load_vec_info_type:
- done = vectorizable_load (stmt, bsi, &vec_stmt);
- gcc_assert (done);
- break;
-
- case store_vec_info_type:
- done = vectorizable_store (stmt, bsi, &vec_stmt);
- gcc_assert (done);
- is_store = true;
- break;
- default:
- if (vect_debug_details (NULL))
- fprintf (dump_file, "stmt not supported.");
- gcc_unreachable ();
- }
-
- STMT_VINFO_VEC_STMT (stmt_info) = vec_stmt;
-
- return is_store;
-}
-
-
-/* Function vect_transform_loop_bound.
-
- Create a new exit condition for the loop. */
-
-static void
-vect_transform_loop_bound (loop_vec_info loop_vinfo)
-{
- struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
- edge exit_edge = loop->single_exit;
- block_stmt_iterator loop_exit_bsi = bsi_last (exit_edge->src);
- tree indx_before_incr, indx_after_incr;
- tree orig_cond_expr;
- HOST_WIDE_INT old_N = 0;
- int vf;
- tree cond_stmt;
- tree new_loop_bound;
- tree cond;
- tree lb_type;
-
- gcc_assert (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo));
- old_N = LOOP_VINFO_NITERS (loop_vinfo);
- vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo);
-
- /* FORNOW:
- assuming number-of-iterations divides by the vectorization factor. */
- gcc_assert (!(old_N % vf));
-
- orig_cond_expr = LOOP_VINFO_EXIT_COND (loop_vinfo);
- gcc_assert (orig_cond_expr);
- gcc_assert (orig_cond_expr == bsi_stmt (loop_exit_bsi));
-
- create_iv (integer_zero_node, integer_one_node, NULL_TREE, loop,
- &loop_exit_bsi, false, &indx_before_incr, &indx_after_incr);
-
- /* bsi_insert is using BSI_NEW_STMT. We need to bump it back
- to point to the exit condition. */
- bsi_next (&loop_exit_bsi);
- gcc_assert (bsi_stmt (loop_exit_bsi) == orig_cond_expr);
-
- /* new loop exit test: */
- lb_type = TREE_TYPE (TREE_OPERAND (TREE_OPERAND (orig_cond_expr, 0), 1));
- new_loop_bound = build_int_cst (lb_type, old_N/vf);
-
- if (exit_edge->flags & EDGE_TRUE_VALUE) /* 'then' edge exits the loop. */
- cond = build2 (GE_EXPR, boolean_type_node, indx_after_incr, new_loop_bound);
- else /* 'then' edge loops back. */
- cond = build2 (LT_EXPR, boolean_type_node, indx_after_incr, new_loop_bound);
-
- cond_stmt = build3 (COND_EXPR, TREE_TYPE (orig_cond_expr), cond,
- TREE_OPERAND (orig_cond_expr, 1), TREE_OPERAND (orig_cond_expr, 2));
-
- bsi_insert_before (&loop_exit_bsi, cond_stmt, BSI_SAME_STMT);
-
- /* remove old loop exit test: */
- bsi_remove (&loop_exit_bsi);
-
- if (vect_debug_details (NULL))
- print_generic_expr (dump_file, cond_stmt, TDF_SLIM);
-}
-
-
-/* Function vect_transform_loop.
-
- The analysis phase has determined that the loop is vectorizable.
- Vectorize the loop - created vectorized stmts to replace the scalar
- stmts in the loop, and update the loop exit condition. */
-
-static void
-vect_transform_loop (loop_vec_info loop_vinfo,
- struct loops *loops ATTRIBUTE_UNUSED)
-{
- struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
- basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo);
- int nbbs = loop->num_nodes;
- block_stmt_iterator si;
- int i;
-#ifdef ENABLE_CHECKING
- int vectorization_factor = LOOP_VINFO_VECT_FACTOR (loop_vinfo);
-#endif
-
- if (vect_debug_details (NULL))
- fprintf (dump_file, "\n<<vec_transform_loop>>\n");
-
- /* 1) Make sure the loop header has exactly two entries
- 2) Make sure we have a preheader basic block. */
-
- gcc_assert (loop->header->pred->pred_next);
- gcc_assert (!loop->header->pred->pred_next->pred_next);
-
- loop_split_edge_with (loop_preheader_edge (loop), NULL);
-
-
- /* FORNOW: the vectorizer supports only loops which body consist
- of one basic block (header + empty latch). When the vectorizer will
- support more involved loop forms, the order by which the BBs are
- traversed need to be reconsidered. */
-
- for (i = 0; i < nbbs; i++)
- {
- basic_block bb = bbs[i];
-
- for (si = bsi_start (bb); !bsi_end_p (si);)
- {
- tree stmt = bsi_stmt (si);
- stmt_vec_info stmt_info;
- bool is_store;
-#ifdef ENABLE_CHECKING
- tree vectype;
-#endif
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "------>vectorizing statement: ");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
- stmt_info = vinfo_for_stmt (stmt);
- gcc_assert (stmt_info);
- if (!STMT_VINFO_RELEVANT_P (stmt_info))
- {
- bsi_next (&si);
- continue;
- }
-#ifdef ENABLE_CHECKING
- /* FORNOW: Verify that all stmts operate on the same number of
- units and no inner unrolling is necessary. */
- vectype = STMT_VINFO_VECTYPE (stmt_info);
- gcc_assert (GET_MODE_NUNITS (TYPE_MODE (vectype))
- == vectorization_factor);
-#endif
- /* -------- vectorize statement ------------ */
- if (vect_debug_details (NULL))
- fprintf (dump_file, "transform statement.");
-
- is_store = vect_transform_stmt (stmt, &si);
- if (is_store)
- {
- /* free the attached stmt_vec_info and remove the stmt. */
- stmt_ann_t ann = stmt_ann (stmt);
- free (stmt_info);
- set_stmt_info (ann, NULL);
- bsi_remove (&si);
- continue;
- }
-
- bsi_next (&si);
- } /* stmts in BB */
- } /* BBs in loop */
-
- vect_transform_loop_bound (loop_vinfo);
-
- if (vect_debug_details (loop))
- fprintf (dump_file,"Success! loop vectorized.");
- if (vect_debug_stats (loop))
- fprintf (dump_file, "LOOP VECTORIZED.");
-}
-
-
-/* Function vect_is_simple_use.
-
- Input:
- LOOP - the loop that is being vectorized.
- OPERAND - operand of a stmt in LOOP.
- DEF - the defining stmt in case OPERAND is an SSA_NAME.
-
- Returns whether a stmt with OPERAND can be vectorized.
- Supportable operands are constants, loop invariants, and operands that are
- defined by the current iteration of the loop. Unsupportable operands are
- those that are defined by a previous iteration of the loop (as is the case
- in reduction/induction computations). */
-
-static bool
-vect_is_simple_use (tree operand, struct loop *loop, tree *def)
-{
- tree def_stmt;
- basic_block bb;
-
- if (def)
- *def = NULL_TREE;
-
- if (TREE_CODE (operand) == INTEGER_CST || TREE_CODE (operand) == REAL_CST)
- return true;
-
- if (TREE_CODE (operand) != SSA_NAME)
- return false;
-
- def_stmt = SSA_NAME_DEF_STMT (operand);
- if (def_stmt == NULL_TREE )
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "no def_stmt.");
- return false;
- }
-
- /* empty stmt is expected only in case of a function argument.
- (Otherwise - we expect a phi_node or a modify_expr). */
- if (IS_EMPTY_STMT (def_stmt))
- {
- tree arg = TREE_OPERAND (def_stmt, 0);
- if (TREE_CODE (arg) == INTEGER_CST || TREE_CODE (arg) == REAL_CST)
- return true;
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "Unexpected empty stmt: ");
- print_generic_expr (dump_file, def_stmt, TDF_SLIM);
- }
- return false;
- }
-
- /* phi_node inside the loop indicates an induction/reduction pattern.
- This is not supported yet. */
- bb = bb_for_stmt (def_stmt);
- if (TREE_CODE (def_stmt) == PHI_NODE && flow_bb_inside_loop_p (loop, bb))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "reduction/induction - unsupported.");
- return false; /* FORNOW: not supported yet. */
- }
-
- /* Expecting a modify_expr or a phi_node. */
- if (TREE_CODE (def_stmt) == MODIFY_EXPR
- || TREE_CODE (def_stmt) == PHI_NODE)
- {
- if (def)
- *def = def_stmt;
- return true;
- }
-
- return false;
-}
-
-
-/* Function vect_analyze_operations.
-
- Scan the loop stmts and make sure they are all vectorizable. */
-
-static bool
-vect_analyze_operations (loop_vec_info loop_vinfo)
-{
- struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
- basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo);
- int nbbs = loop->num_nodes;
- block_stmt_iterator si;
- int vectorization_factor = 0;
- int i;
- bool ok;
- tree scalar_type;
-
- if (vect_debug_details (NULL))
- fprintf (dump_file, "\n<<vect_analyze_operations>>\n");
-
- for (i = 0; i < nbbs; i++)
- {
- basic_block bb = bbs[i];
-
- for (si = bsi_start (bb); !bsi_end_p (si); bsi_next (&si))
- {
- tree stmt = bsi_stmt (si);
- int nunits;
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- tree vectype;
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "==> examining statement: ");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
-
- gcc_assert (stmt_info);
-
- /* skip stmts which do not need to be vectorized.
- this is expected to include:
- - the COND_EXPR which is the loop exit condition
- - any LABEL_EXPRs in the loop
- - computations that are used only for array indexing or loop
- control */
-
- if (!STMT_VINFO_RELEVANT_P (stmt_info))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "irrelevant.");
- continue;
- }
-
- if (VECTOR_MODE_P (TYPE_MODE (TREE_TYPE (stmt))))
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- {
- fprintf (dump_file, "not vectorized: vector stmt in loop:");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
- return false;
- }
-
- if (STMT_VINFO_DATA_REF (stmt_info))
- scalar_type = TREE_TYPE (DR_REF (STMT_VINFO_DATA_REF (stmt_info)));
- else if (TREE_CODE (stmt) == MODIFY_EXPR)
- scalar_type = TREE_TYPE (TREE_OPERAND (stmt, 0));
- else
- scalar_type = TREE_TYPE (stmt);
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "get vectype for scalar type: ");
- print_generic_expr (dump_file, scalar_type, TDF_SLIM);
- }
-
- vectype = get_vectype_for_scalar_type (scalar_type);
- if (!vectype)
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- {
- fprintf (dump_file, "not vectorized: unsupported data-type ");
- print_generic_expr (dump_file, scalar_type, TDF_SLIM);
- }
- return false;
- }
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "vectype: ");
- print_generic_expr (dump_file, vectype, TDF_SLIM);
- }
- STMT_VINFO_VECTYPE (stmt_info) = vectype;
-
- ok = (vectorizable_operation (stmt, NULL, NULL)
- || vectorizable_assignment (stmt, NULL, NULL)
- || vectorizable_load (stmt, NULL, NULL)
- || vectorizable_store (stmt, NULL, NULL));
-
- if (!ok)
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- {
- fprintf (dump_file, "not vectorized: stmt not supported: ");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
- return false;
- }
-
- nunits = GET_MODE_NUNITS (TYPE_MODE (vectype));
- if (vect_debug_details (NULL))
- fprintf (dump_file, "nunits = %d", nunits);
-
- if (vectorization_factor)
- {
- /* FORNOW: don't allow mixed units.
- This restriction will be relaxed in the future. */
- if (nunits != vectorization_factor)
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: mixed data-types");
- return false;
- }
- }
- else
- vectorization_factor = nunits;
- }
- }
-
- /* TODO: Analyze cost. Decide if worth while to vectorize. */
- if (!vectorization_factor)
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: unsupported data-type");
- return false;
- }
- LOOP_VINFO_VECT_FACTOR (loop_vinfo) = vectorization_factor;
-
- /* FORNOW: handle only cases where the loop bound divides by the
- vectorization factor. */
-
- if (vect_debug_details (NULL))
- fprintf (dump_file,
- "vectorization_factor = %d, niters = " HOST_WIDE_INT_PRINT_DEC,
- vectorization_factor, LOOP_VINFO_NITERS (loop_vinfo));
-
- if (!LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo))
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: Unknown loop bound.");
- return false;
- }
-
- if (LOOP_VINFO_NITERS_KNOWN_P (loop_vinfo)
- && LOOP_VINFO_NITERS (loop_vinfo) % vectorization_factor != 0)
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: loop bound doesn't divided by %d.",
- vectorization_factor);
- return false;
- }
-
- return true;
-}
-
-
-/* Function exist_non_indexing_operands_for_use_p
-
- USE is one of the uses attached to STMT. Check if USE is
- used in STMT for anything other than indexing an array. */
-
-static bool
-exist_non_indexing_operands_for_use_p (tree use, tree stmt)
-{
- tree operand;
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
-
- /* USE corresponds to some operand in STMT. If there is no data
- reference in STMT, then any operand that corresponds to USE
- is not indexing an array. */
- if (!STMT_VINFO_DATA_REF (stmt_info))
- return true;
-
- /* STMT has a data_ref. FORNOW this means that its of one of
- the following forms:
- -1- ARRAY_REF = var
- -2- var = ARRAY_REF
- (This should have been verified in analyze_data_refs).
-
- 'var' in the second case corresponds to a def, not a use,
- so USE cannot correspond to any operands that are not used
- for array indexing.
-
- Therefore, all we need to check is if STMT falls into the
- first case, and whether var corresponds to USE. */
-
- if (TREE_CODE (TREE_OPERAND (stmt, 0)) == SSA_NAME)
- return false;
-
- operand = TREE_OPERAND (stmt, 1);
-
- if (TREE_CODE (operand) != SSA_NAME)
- return false;
-
- if (operand == use)
- return true;
-
- return false;
-}
-
-
-/* Function vect_is_simple_iv_evolution.
-
- FORNOW: A simple evolution of an induction variables in the loop is
- considered a polynomial evolution with constant step. */
-
-static bool
-vect_is_simple_iv_evolution (unsigned loop_nb, tree access_fn, tree * init,
- tree * step, bool strict)
-{
- tree init_expr;
- tree step_expr;
-
- tree evolution_part = evolution_part_in_loop_num (access_fn, loop_nb);
-
- /* When there is no evolution in this loop, the evolution function
- is not "simple". */
- if (evolution_part == NULL_TREE)
- return false;
-
- /* When the evolution is a polynomial of degree >= 2
- the evolution function is not "simple". */
- if (tree_is_chrec (evolution_part))
- return false;
-
- step_expr = evolution_part;
- init_expr = initial_condition (access_fn);
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "step: ");
- print_generic_expr (dump_file, step_expr, TDF_SLIM);
- fprintf (dump_file, ", init: ");
- print_generic_expr (dump_file, init_expr, TDF_SLIM);
- }
-
- *init = init_expr;
- *step = step_expr;
-
- if (TREE_CODE (step_expr) != INTEGER_CST)
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "step unknown.");
- return false;
- }
-
- if (strict)
- if (!integer_onep (step_expr))
- {
- if (vect_debug_details (NULL))
- print_generic_expr (dump_file, step_expr, TDF_SLIM);
- return false;
- }
-
- return true;
-}
-
-
-/* Function vect_analyze_scalar_cycles.
-
- Examine the cross iteration def-use cycles of scalar variables, by
- analyzing the loop (scalar) PHIs; verify that the cross iteration def-use
- cycles that they represent do not impede vectorization.
-
- FORNOW: Reduction as in the following loop, is not supported yet:
- loop1:
- for (i=0; i<N; i++)
- sum += a[i];
- The cross-iteration cycle corresponding to variable 'sum' will be
- considered too complicated and will impede vectorization.
-
- FORNOW: Induction as in the following loop, is not supported yet:
- loop2:
- for (i=0; i<N; i++)
- a[i] = i;
-
- However, the following loop *is* vectorizable:
- loop3:
- for (i=0; i<N; i++)
- a[i] = b[i];
-
- In both loops there exists a def-use cycle for the variable i:
- loop: i_2 = PHI (i_0, i_1)
- a[i_2] = ...;
- i_1 = i_2 + 1;
- GOTO loop;
-
- The evolution of the above cycle is considered simple enough,
- however, we also check that the cycle does not need to be
- vectorized, i.e - we check that the variable that this cycle
- defines is only used for array indexing or in stmts that do not
- need to be vectorized. This is not the case in loop2, but it
- *is* the case in loop3. */
-
-static bool
-vect_analyze_scalar_cycles (loop_vec_info loop_vinfo)
-{
- tree phi;
- struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
- basic_block bb = loop->header;
- tree dummy;
-
- if (vect_debug_details (NULL))
- fprintf (dump_file, "\n<<vect_analyze_scalar_cycles>>\n");
-
- for (phi = phi_nodes (bb); phi; phi = TREE_CHAIN (phi))
- {
- tree access_fn = NULL;
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "Analyze phi: ");
- print_generic_expr (dump_file, phi, TDF_SLIM);
- }
-
- /* Skip virtual phi's. The data dependences that are associated with
- virtual defs/uses (i.e., memory accesses) are analyzed elsewhere. */
-
- if (!is_gimple_reg (SSA_NAME_VAR (PHI_RESULT (phi))))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "virtual phi. skip.");
- continue;
- }
-
- /* Analyze the evolution function. */
-
- /* FORNOW: The only scalar cross-iteration cycles that we allow are
- those of loop induction variables; This property is verified here.
-
- Furthermore, if that induction variable is used in an operation
- that needs to be vectorized (i.e, is not solely used to index
- arrays and check the exit condition) - we do not support its
- vectorization yet. This property is verified in vect_is_simple_use,
- during vect_analyze_operations. */
-
- access_fn = /* instantiate_parameters
- (loop,*/
- analyze_scalar_evolution (loop, PHI_RESULT (phi));
-
- if (!access_fn)
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: unsupported scalar cycle.");
- return false;
- }
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "Access function of PHI: ");
- print_generic_expr (dump_file, access_fn, TDF_SLIM);
- }
-
- if (!vect_is_simple_iv_evolution (loop->num, access_fn, &dummy,
- &dummy, false))
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: unsupported scalar cycle.");
- return false;
- }
- }
-
- return true;
-}
-
-
-/* Function vect_analyze_data_ref_dependence.
-
- Return TRUE if there (might) exist a dependence between a memory-reference
- DRA and a memory-reference DRB. */
-
-static bool
-vect_analyze_data_ref_dependence (struct data_reference *dra,
- struct data_reference *drb,
- struct loop *loop)
-{
- bool differ_p;
- struct data_dependence_relation *ddr;
-
- if (!array_base_name_differ_p (dra, drb, &differ_p))
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- {
- fprintf (dump_file,
- "not vectorized: can't determine dependence between: ");
- print_generic_expr (dump_file, DR_REF (dra), TDF_SLIM);
- fprintf (dump_file, " and ");
- print_generic_expr (dump_file, DR_REF (drb), TDF_SLIM);
- }
- return true;
- }
-
- if (differ_p)
- return false;
-
- ddr = initialize_data_dependence_relation (dra, drb);
- compute_affine_dependence (ddr);
-
- if (DDR_ARE_DEPENDENT (ddr) == chrec_known)
- return false;
-
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- {
- fprintf (dump_file,
- "not vectorized: possible dependence between data-refs ");
- print_generic_expr (dump_file, DR_REF (dra), TDF_SLIM);
- fprintf (dump_file, " and ");
- print_generic_expr (dump_file, DR_REF (drb), TDF_SLIM);
- }
-
- return true;
-}
-
-
-/* Function vect_analyze_data_ref_dependences.
-
- Examine all the data references in the loop, and make sure there do not
- exist any data dependences between them.
-
- TODO: dependences which distance is greater than the vectorization factor
- can be ignored. */
-
-static bool
-vect_analyze_data_ref_dependences (loop_vec_info loop_vinfo)
-{
- unsigned int i, j;
- varray_type loop_write_refs = LOOP_VINFO_DATAREF_WRITES (loop_vinfo);
- varray_type loop_read_refs = LOOP_VINFO_DATAREF_READS (loop_vinfo);
- struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
-
- /* Examine store-store (output) dependences. */
-
- if (vect_debug_details (NULL))
- fprintf (dump_file, "\n<<vect_analyze_dependences>>\n");
-
- if (vect_debug_details (NULL))
- fprintf (dump_file, "compare all store-store pairs.");
-
- for (i = 0; i < VARRAY_ACTIVE_SIZE (loop_write_refs); i++)
- {
- for (j = i + 1; j < VARRAY_ACTIVE_SIZE (loop_write_refs); j++)
- {
- struct data_reference *dra =
- VARRAY_GENERIC_PTR (loop_write_refs, i);
- struct data_reference *drb =
- VARRAY_GENERIC_PTR (loop_write_refs, j);
- if (vect_analyze_data_ref_dependence (dra, drb, loop))
- return false;
- }
- }
-
- /* Examine load-store (true/anti) dependences. */
-
- if (vect_debug_details (NULL))
- fprintf (dump_file, "compare all load-store pairs.");
-
- for (i = 0; i < VARRAY_ACTIVE_SIZE (loop_read_refs); i++)
- {
- for (j = 0; j < VARRAY_ACTIVE_SIZE (loop_write_refs); j++)
- {
- struct data_reference *dra = VARRAY_GENERIC_PTR (loop_read_refs, i);
- struct data_reference *drb =
- VARRAY_GENERIC_PTR (loop_write_refs, j);
- if (vect_analyze_data_ref_dependence (dra, drb, loop))
- return false;
- }
- }
-
- return true;
-}
-
-
-/* Function vect_get_first_index.
-
- REF is a data reference.
- If it is an ARRAY_REF: if its lower bound is simple enough,
- put it in ARRAY_FIRST_INDEX and return TRUE; otherwise - return FALSE.
- If it is not an ARRAY_REF: REF has no "first index";
- ARRAY_FIRST_INDEX in zero, and the function returns TRUE. */
-
-static bool
-vect_get_first_index (tree ref, tree *array_first_index)
-{
- tree array_start;
-
- if (TREE_CODE (ref) != ARRAY_REF)
- *array_first_index = size_zero_node;
- else
- {
- array_start = array_ref_low_bound (ref);
- if (!host_integerp (array_start,0))
- {
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "array min val not simple integer cst.");
- print_generic_expr (dump_file, array_start, TDF_DETAILS);
- }
- return false;
- }
- *array_first_index = array_start;
- }
-
- return true;
-}
-
-
-/* Function vect_compute_array_base_alignment.
- A utility function of vect_compute_array_ref_alignment.
-
- Compute the misalignment of ARRAY in bits.
-
- Input:
- ARRAY - an array_ref (possibly multidimensional) of type ARRAY_TYPE.
- VECTYPE - we are interested in the misalignment modulu the size of vectype.
- if NULL: don't compute misalignment, just return the base of ARRAY.
- PREV_DIMENSIONS - initialized to one.
- MISALIGNMENT - the computed misalignment in bits.
-
- Output:
- If VECTYPE is not NULL:
- Return NULL_TREE if the misalignment cannot be computed. Otherwise, return
- the base of the array, and put the computed misalignment in MISALIGNMENT.
- If VECTYPE is NULL:
- Return the base of the array.
-
- For a[idx_N]...[idx_2][idx_1][idx_0], the address of
- a[idx_N]...[idx_2][idx_1] is
- {&a + idx_1 * dim_0 + idx_2 * dim_0 * dim_1 + ...
- ... + idx_N * dim_0 * ... * dim_N-1}.
- (The misalignment of &a is not checked here).
- Note, that every term contains dim_0, therefore, if dim_0 is a
- multiple of NUNITS, the whole sum is a multiple of NUNITS.
- Otherwise, if idx_1 is constant, and dim_1 is a multiple of
- NUINTS, we can say that the misalignment of the sum is equal to
- the misalignment of {idx_1 * dim_0}. If idx_1 is not constant,
- we can't determine this array misalignment, and we return
- false.
- We proceed recursively in this manner, accumulating total misalignment
- and the multiplication of previous dimensions for correct misalignment
- calculation. */
-
-static tree
-vect_compute_array_base_alignment (tree array,
- tree vectype,
- tree *prev_dimensions,
- tree *misalignment)
-{
- tree index;
- tree domain;
- tree dimension_size;
- tree mis;
- tree bits_per_vectype;
- tree bits_per_vectype_unit;
-
- /* The 'stop condition' of the recursion. */
- if (TREE_CODE (array) != ARRAY_REF)
- return array;
-
- if (!vectype)
- /* Just get the base decl. */
- return vect_compute_array_base_alignment
- (TREE_OPERAND (array, 0), NULL, NULL, NULL);
-
- if (!host_integerp (*misalignment, 1) || TREE_OVERFLOW (*misalignment) ||
- !host_integerp (*prev_dimensions, 1) || TREE_OVERFLOW (*prev_dimensions))
- return NULL_TREE;
-
- domain = TYPE_DOMAIN (TREE_TYPE (array));
- dimension_size =
- int_const_binop (PLUS_EXPR,
- int_const_binop (MINUS_EXPR, TYPE_MAX_VALUE (domain),
- TYPE_MIN_VALUE (domain), 1),
- size_one_node, 1);
-
- /* Check if the dimension size is a multiple of NUNITS, the remaining sum
- is a multiple of NUNITS:
-
- dimension_size % GET_MODE_NUNITS (TYPE_MODE (vectype)) == 0 ?
- */
- mis = int_const_binop (TRUNC_MOD_EXPR, dimension_size,
- build_int_cst (NULL_TREE, GET_MODE_NUNITS (TYPE_MODE (vectype))), 1);
- if (integer_zerop (mis))
- /* This array is aligned. Continue just in order to get the base decl. */
- return vect_compute_array_base_alignment
- (TREE_OPERAND (array, 0), NULL, NULL, NULL);
-
- index = TREE_OPERAND (array, 1);
- if (!host_integerp (index, 1))
- /* The current index is not constant. */
- return NULL_TREE;
-
- index = int_const_binop (MINUS_EXPR, index, TYPE_MIN_VALUE (domain), 0);
-
- bits_per_vectype = fold_convert (unsigned_type_node,
- build_int_cst (NULL_TREE, BITS_PER_UNIT *
- GET_MODE_SIZE (TYPE_MODE (vectype))));
- bits_per_vectype_unit = fold_convert (unsigned_type_node,
- build_int_cst (NULL_TREE, BITS_PER_UNIT *
- GET_MODE_SIZE (TYPE_MODE (TREE_TYPE (vectype)))));
-
- /* Add {idx_i * dim_i-1 * ... * dim_0 } to the misalignment computed
- earlier:
-
- *misalignment =
- (*misalignment + index_val * dimension_size * *prev_dimensions)
- % vectype_nunits;
- */
-
- mis = int_const_binop (MULT_EXPR, index, dimension_size, 1);
- mis = int_const_binop (MULT_EXPR, mis, *prev_dimensions, 1);
- mis = int_const_binop (MULT_EXPR, mis, bits_per_vectype_unit, 1);
- mis = int_const_binop (PLUS_EXPR, *misalignment, mis, 1);
- *misalignment = int_const_binop (TRUNC_MOD_EXPR, mis, bits_per_vectype, 1);
-
-
- *prev_dimensions = int_const_binop (MULT_EXPR,
- *prev_dimensions, dimension_size, 1);
-
- return vect_compute_array_base_alignment (TREE_OPERAND (array, 0), vectype,
- prev_dimensions,
- misalignment);
-}
-
-
-/* Function vect_compute_data_ref_alignment
-
- Compute the misalignment of the data reference DR.
-
- Output:
- 1. If during the misalignment computation it is found that the data reference
- cannot be vectorized then false is returned.
- 2. DR_MISALIGNMENT (DR) is defined.
-
- FOR NOW: No analysis is actually performed. Misalignment is calculated
- only for trivial cases. TODO. */
-
-static bool
-vect_compute_data_ref_alignment (struct data_reference *dr,
- loop_vec_info loop_vinfo)
-{
- tree stmt = DR_STMT (dr);
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- tree ref = DR_REF (dr);
- tree vectype;
- tree scalar_type;
- tree offset = size_zero_node;
- tree base, bit_offset, alignment;
- tree unit_bits = fold_convert (unsigned_type_node,
- build_int_cst (NULL_TREE, BITS_PER_UNIT));
- tree dr_base;
- bool base_aligned_p;
-
- if (vect_debug_details (NULL))
- fprintf (dump_file, "vect_compute_data_ref_alignment:");
-
- /* Initialize misalignment to unknown. */
- DR_MISALIGNMENT (dr) = -1;
-
- scalar_type = TREE_TYPE (ref);
- vectype = get_vectype_for_scalar_type (scalar_type);
- if (!vectype)
- {
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "no vectype for stmt: ");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- fprintf (dump_file, " scalar_type: ");
- print_generic_expr (dump_file, scalar_type, TDF_DETAILS);
- }
- /* It is not possible to vectorize this data reference. */
- return false;
- }
- gcc_assert (TREE_CODE (ref) == ARRAY_REF || TREE_CODE (ref) == INDIRECT_REF);
-
- if (TREE_CODE (ref) == ARRAY_REF)
- dr_base = ref;
- else
- dr_base = STMT_VINFO_VECT_DR_BASE (stmt_info);
-
- base = vect_get_base_and_bit_offset (dr, dr_base, vectype,
- loop_vinfo, &bit_offset, &base_aligned_p);
- if (!base)
- {
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "Unknown alignment for access: ");
- print_generic_expr (dump_file,
- STMT_VINFO_VECT_DR_BASE (stmt_info), TDF_SLIM);
- }
- return true;
- }
-
- if (!base_aligned_p)
- {
- if (!vect_can_force_dr_alignment_p (base, TYPE_ALIGN (vectype)))
- {
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "can't force alignment of ref: ");
- print_generic_expr (dump_file, ref, TDF_SLIM);
- }
- return true;
- }
-
- /* Force the alignment of the decl.
- NOTE: This is the only change to the code we make during
- the analysis phase, before deciding to vectorize the loop. */
- if (vect_debug_details (NULL))
- fprintf (dump_file, "force alignment");
- DECL_ALIGN (base) = TYPE_ALIGN (vectype);
- DECL_USER_ALIGN (base) = TYPE_ALIGN (vectype);
- }
-
- /* At this point we assume that the base is aligned, and the offset from it
- (including index, if relevant) has been computed and is in BIT_OFFSET. */
- gcc_assert (base_aligned_p
- || (TREE_CODE (base) == VAR_DECL
- && DECL_ALIGN (base) >= TYPE_ALIGN (vectype)));
-
- /* Convert into bytes. */
- offset = int_const_binop (TRUNC_DIV_EXPR, bit_offset, unit_bits, 1);
- /* Check that there is no remainder in bits. */
- bit_offset = int_const_binop (TRUNC_MOD_EXPR, bit_offset, unit_bits, 1);
- if (!integer_zerop (bit_offset))
- {
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "bit offset alignment: ");
- print_generic_expr (dump_file, bit_offset, TDF_SLIM);
- }
- return false;
- }
-
- /* Alignment required, in bytes: */
- alignment = fold_convert (unsigned_type_node,
- build_int_cst (NULL_TREE, TYPE_ALIGN (vectype)/BITS_PER_UNIT));
-
- /* Modulo alignment. */
- offset = int_const_binop (TRUNC_MOD_EXPR, offset, alignment, 0);
- if (!host_integerp (offset, 1) || TREE_OVERFLOW (offset))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "unexpected misalign value");
- return false;
- }
-
- DR_MISALIGNMENT (dr) = tree_low_cst (offset, 1);
-
- if (vect_debug_details (NULL))
- fprintf (dump_file, "misalign = %d", DR_MISALIGNMENT (dr));
-
- return true;
-}
-
-
-/* Function vect_compute_array_ref_alignment
-
- Compute the alignment of an array-ref.
- The alignment we compute here is relative to
- TYPE_ALIGN(VECTYPE) boundary.
-
- Output:
- OFFSET - the alignment in bits
- Return value - the base of the array-ref. E.g,
- if the array-ref is a.b[k].c[i][j] the returned
- base is a.b[k].c
-*/
-
-static tree
-vect_compute_array_ref_alignment (struct data_reference *dr,
- loop_vec_info loop_vinfo,
- tree vectype,
- tree *offset)
-{
- tree array_first_index = size_zero_node;
- tree init;
- tree ref = DR_REF (dr);
- tree scalar_type = TREE_TYPE (ref);
- tree oprnd0 = TREE_OPERAND (ref, 0);
- tree dims = size_one_node;
- tree misalign = size_zero_node;
- tree next_ref, this_offset = size_zero_node;
- tree nunits;
- tree nbits;
-
- if (TREE_CODE (TREE_TYPE (ref)) == ARRAY_TYPE)
- /* The reference is an array without its last index. */
- next_ref = vect_compute_array_base_alignment (ref, vectype, &dims, &misalign);
- else
- next_ref =
- vect_compute_array_base_alignment (oprnd0, vectype, &dims, &misalign);
- if (!vectype)
- /* Alignment is not requested. Just return the base. */
- return next_ref;
-
- /* Compute alignment. */
- if (!host_integerp (misalign, 1) || TREE_OVERFLOW (misalign) || !next_ref)
- return NULL_TREE;
- this_offset = misalign;
-
- /* Check the first index accessed. */
- if (!vect_get_first_index (ref, &array_first_index))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "no first_index for array.");
- return NULL_TREE;
- }
-
- /* Check the index of the array_ref. */
- init = initial_condition_in_loop_num (DR_ACCESS_FN (dr, 0),
- LOOP_VINFO_LOOP (loop_vinfo)->num);
-
- /* FORNOW: In order to simplify the handling of alignment, we make sure
- that the first location at which the array is accessed ('init') is on an
- 'NUNITS' boundary, since we are assuming here that 'array base' is aligned.
- This is too conservative, since we require that
- both {'array_base' is a multiple of NUNITS} && {'init' is a multiple of
- NUNITS}, instead of just {('array_base' + 'init') is a multiple of NUNITS}.
- This should be relaxed in the future. */
-
- if (!init || !host_integerp (init, 0))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "non constant init. ");
- return NULL_TREE;
- }
-
- /* bytes per scalar element: */
- nunits = fold_convert (unsigned_type_node,
- build_int_cst (NULL_TREE, GET_MODE_SIZE (TYPE_MODE (scalar_type))));
- nbits = int_const_binop (MULT_EXPR, nunits,
- build_int_cst (NULL_TREE, BITS_PER_UNIT), 1);
-
- /* misalign = offset + (init-array_first_index)*nunits*bits_in_byte */
- misalign = int_const_binop (MINUS_EXPR, init, array_first_index, 0);
- misalign = int_const_binop (MULT_EXPR, misalign, nbits, 0);
- misalign = int_const_binop (PLUS_EXPR, misalign, this_offset, 0);
-
- /* TODO: allow negative misalign values. */
- if (!host_integerp (misalign, 1) || TREE_OVERFLOW (misalign))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "unexpected misalign value");
- return NULL_TREE;
- }
- *offset = misalign;
- return next_ref;
-}
-
-
-/* Function vect_compute_data_refs_alignment
-
- Compute the misalignment of data references in the loop.
- This pass may take place at function granularity instead of at loop
- granularity.
- FOR NOW: No analysis is actually performed. Misalignment is calculated
- only for trivial cases. TODO. */
+/* Releases the structures holding the new ssa names. */
static void
-vect_compute_data_refs_alignment (loop_vec_info loop_vinfo)
+free_new_names (bitmap definitions)
{
- varray_type loop_write_datarefs = LOOP_VINFO_DATAREF_WRITES (loop_vinfo);
- varray_type loop_read_datarefs = LOOP_VINFO_DATAREF_READS (loop_vinfo);
- unsigned int i;
+ unsigned ver;
+ bitmap_iterator bi;
- for (i = 0; i < VARRAY_ACTIVE_SIZE (loop_write_datarefs); i++)
+ EXECUTE_IF_SET_IN_BITMAP (definitions, 0, ver, bi)
{
- struct data_reference *dr = VARRAY_GENERIC_PTR (loop_write_datarefs, i);
- vect_compute_data_ref_alignment (dr, loop_vinfo);
- }
+ tree def = ssa_name (ver);
- for (i = 0; i < VARRAY_ACTIVE_SIZE (loop_read_datarefs); i++)
- {
- struct data_reference *dr = VARRAY_GENERIC_PTR (loop_read_datarefs, i);
- vect_compute_data_ref_alignment (dr, loop_vinfo);
+ if (SSA_NAME_AUX (def))
+ {
+ free (SSA_NAME_AUX (def));
+ SSA_NAME_AUX (def) = NULL;
+ }
}
}
-/* Function vect_enhance_data_refs_alignment
+/* Renames variables in new generated LOOP. */
+
+static void
+rename_variables_in_loop (struct loop *loop)
+{
+ unsigned i;
+ basic_block *bbs;
+
+ bbs = get_loop_body (loop);
+
+ for (i = 0; i < loop->num_nodes; i++)
+ rename_variables_in_bb (bbs[i]);
+
+ free (bbs);
+}
- This pass will use loop versioning and loop peeling in order to enhance
- the alignment of data references in the loop.
- FOR NOW: we assume that whatever versioning/peeling takes place, only the
- original loop is to be vectorized; Any other loops that are created by
- the transformations performed in this pass - are not supposed to be
- vectorized. This restriction will be relaxed.
+/* Update the PHI nodes of NEW_LOOP.
- FOR NOW: No transformation is actually performed. TODO. */
+ NEW_LOOP is a duplicate of ORIG_LOOP.
+ AFTER indicates whether NEW_LOOP executes before or after ORIG_LOOP:
+ AFTER is true if NEW_LOOP executes after ORIG_LOOP, and false if it
+ executes before it. */
static void
-vect_enhance_data_refs_alignment (loop_vec_info loop_vinfo ATTRIBUTE_UNUSED)
+slpeel_update_phis_for_duplicate_loop (struct loop *orig_loop,
+ struct loop *new_loop, bool after)
{
+ tree *new_name_ptr, new_ssa_name;
+ tree phi_new, phi_orig;
+ tree def;
+ edge orig_loop_latch = loop_latch_edge (orig_loop);
+ edge orig_entry_e = loop_preheader_edge (orig_loop);
+ edge new_loop_exit_e = new_loop->single_exit;
+ edge new_loop_entry_e = loop_preheader_edge (new_loop);
+ edge entry_arg_e = (after ? orig_loop_latch : orig_entry_e);
+
/*
- This pass will require a cost model to guide it whether to apply peeling
- or versioning or a combination of the two. For example, the scheme that
- intel uses when given a loop with several memory accesses, is as follows:
- choose one memory access ('p') which alignment you want to force by doing
- peeling. Then, either (1) generate a loop in which 'p' is aligned and all
- other accesses are not necessarily aligned, or (2) use loop versioning to
- generate one loop in which all accesses are aligned, and another loop in
- which only 'p' is necessarily aligned.
-
- ("Automatic Intra-Register Vectorization for the Intel Architecture",
- Aart J.C. Bik, Milind Girkar, Paul M. Grey and Ximmin Tian, International
- Journal of Parallel Programming, Vol. 30, No. 2, April 2002.)
-
- Devising a cost model is the most critical aspect of this work. It will
- guide us on which access to peel for, whether to use loop versioning, how
- many versions to create, etc. The cost model will probably consist of
- generic considerations as well as target specific considerations (on
- powerpc for example, misaligned stores are more painful than misaligned
- loads).
-
- Here is the general steps involved in alignment enhancements:
-
- -- original loop, before alignment analysis:
- for (i=0; i<N; i++){
- x = q[i]; # DR_MISALIGNMENT(q) = unknown
- p[i] = y; # DR_MISALIGNMENT(p) = unknown
- }
+ step 1. For each loop-header-phi:
+ Add the first phi argument for the phi in NEW_LOOP
+ (the one associated with the entry of NEW_LOOP)
+
+ step 2. For each loop-header-phi:
+ Add the second phi argument for the phi in NEW_LOOP
+ (the one associated with the latch of NEW_LOOP)
+
+ step 3. Update the phis in the successor block of NEW_LOOP.
+
+ case 1: NEW_LOOP was placed before ORIG_LOOP:
+ The successor block of NEW_LOOP is the header of ORIG_LOOP.
+ Updating the phis in the successor block can therefore be done
+ along with the scanning of the loop header phis, because the
+ header blocks of ORIG_LOOP and NEW_LOOP have exactly the same
+ phi nodes, organized in the same order.
+
+ case 2: NEW_LOOP was placed after ORIG_LOOP:
+ The successor block of NEW_LOOP is the original exit block of
+ ORIG_LOOP - the phis to be updated are the loop-closed-ssa phis.
+ We postpone updating these phis to a later stage (when
+ loop guards are added).
+ */
- -- After vect_compute_data_refs_alignment:
- for (i=0; i<N; i++){
- x = q[i]; # DR_MISALIGNMENT(q) = 3
- p[i] = y; # DR_MISALIGNMENT(p) = unknown
- }
- -- Possibility 1: we do loop versioning:
- if (p is aligned) {
- for (i=0; i<N; i++){ # loop 1A
- x = q[i]; # DR_MISALIGNMENT(q) = 3
- p[i] = y; # DR_MISALIGNMENT(p) = 0
- }
- }
- else {
- for (i=0; i<N; i++){ # loop 1B
- x = q[i]; # DR_MISALIGNMENT(q) = 3
- p[i] = y; # DR_MISALIGNMENT(p) = unaligned
- }
- }
-
- -- Possibility 2: we do loop peeling:
- for (i = 0; i < 3; i++){ # (scalar loop, not to be vectorized).
- x = q[i];
- p[i] = y;
- }
- for (i = 3; i < N; i++){ # loop 2A
- x = q[i]; # DR_MISALIGNMENT(q) = 0
- p[i] = y; # DR_MISALIGNMENT(p) = unknown
- }
-
- -- Possibility 3: combination of loop peeling and versioning:
- for (i = 0; i < 3; i++){ # (scalar loop, not to be vectorized).
- x = q[i];
- p[i] = y;
- }
- if (p is aligned) {
- for (i = 3; i<N; i++){ # loop 3A
- x = q[i]; # DR_MISALIGNMENT(q) = 0
- p[i] = y; # DR_MISALIGNMENT(p) = 0
- }
- }
- else {
- for (i = 3; i<N; i++){ # loop 3B
- x = q[i]; # DR_MISALIGNMENT(q) = 0
- p[i] = y; # DR_MISALIGNMENT(p) = unaligned
- }
- }
+ /* Scan the phis in the headers of the old and new loops
+ (they are organized in exactly the same order). */
- These loops are later passed to loop_transform to be vectorized. The
- vectorizer will use the alignment information to guide the transformation
- (whether to generate regular loads/stores, or with special handling for
- misalignment).
- */
-}
+ for (phi_new = phi_nodes (new_loop->header),
+ phi_orig = phi_nodes (orig_loop->header);
+ phi_new && phi_orig;
+ phi_new = PHI_CHAIN (phi_new), phi_orig = PHI_CHAIN (phi_orig))
+ {
+ /* step 1. */
+ def = PHI_ARG_DEF_FROM_EDGE (phi_orig, entry_arg_e);
+ add_phi_arg (phi_new, def, new_loop_entry_e);
+
+ /* step 2. */
+ def = PHI_ARG_DEF_FROM_EDGE (phi_orig, orig_loop_latch);
+ if (TREE_CODE (def) != SSA_NAME)
+ continue;
+ new_name_ptr = SSA_NAME_AUX (def);
+ if (!new_name_ptr)
+ /* Something defined outside of the loop. */
+ continue;
-/* Function vect_analyze_data_refs_alignment
+ /* An ordinary ssa name defined in the loop. */
+ new_ssa_name = *new_name_ptr;
+ add_phi_arg (phi_new, new_ssa_name, loop_latch_edge (new_loop));
- Analyze the alignment of the data-references in the loop.
- FOR NOW: Until support for misliagned accesses is in place, only if all
- accesses are aligned can the loop be vectorized. This restriction will be
- relaxed. */
+ /* step 3 (case 1). */
+ if (!after)
+ {
+ gcc_assert (new_loop_exit_e == orig_entry_e);
+ SET_PHI_ARG_DEF (phi_orig,
+ new_loop_exit_e->dest_idx,
+ new_ssa_name);
+ }
+ }
+}
-static bool
-vect_analyze_data_refs_alignment (loop_vec_info loop_vinfo)
-{
- varray_type loop_write_datarefs = LOOP_VINFO_DATAREF_WRITES (loop_vinfo);
- varray_type loop_read_datarefs = LOOP_VINFO_DATAREF_READS (loop_vinfo);
- unsigned int i;
- if (vect_debug_details (NULL))
- fprintf (dump_file, "\n<<vect_analyze_data_refs_alignment>>\n");
+/* Update PHI nodes for a guard of the LOOP.
+
+ Input:
+ - LOOP, GUARD_EDGE: LOOP is a loop for which we added guard code that
+ controls whether LOOP is to be executed. GUARD_EDGE is the edge that
+ originates from the guard-bb, skips LOOP and reaches the (unique) exit
+ bb of LOOP. This loop-exit-bb is an empty bb with one successor.
+ We denote this bb NEW_MERGE_BB because it had a single predecessor (the
+ LOOP header) before the guard code was added, and now it became a merge
+ point of two paths - the path that ends with the LOOP exit-edge, and
+ the path that ends with GUARD_EDGE.
+
+ This function creates and updates the relevant phi nodes to account for
+ the new incoming edge (GUARD_EDGE) into NEW_MERGE_BB:
+ 1. Create phi nodes at NEW_MERGE_BB.
+ 2. Update the phi nodes at the successor of NEW_MERGE_BB (denoted
+ UPDATE_BB). UPDATE_BB was the exit-bb of LOOP before NEW_MERGE_BB
+ was added:
+
+ ===> The CFG before the guard-code was added:
+ LOOP_header_bb:
+ if (exit_loop) goto update_bb : LOOP_header_bb
+ update_bb:
+
+ ==> The CFG after the guard-code was added:
+ guard_bb:
+ if (LOOP_guard_condition) goto new_merge_bb : LOOP_header_bb
+ LOOP_header_bb:
+ if (exit_loop_condition) goto new_merge_bb : LOOP_header_bb
+ new_merge_bb:
+ goto update_bb
+ update_bb:
+
+ - ENTRY_PHIS: If ENTRY_PHIS is TRUE, this indicates that the phis in
+ UPDATE_BB are loop entry phis, like the phis in the LOOP header,
+ organized in the same order.
+ If ENTRY_PHIs is FALSE, this indicates that the phis in UPDATE_BB are
+ loop exit phis.
+
+ - IS_NEW_LOOP: TRUE if LOOP is a new loop (a duplicated copy of another
+ "original" loop). FALSE if LOOP is an original loop (not a newly
+ created copy). The SSA_NAME_AUX fields of the defs in the original
+ loop are the corresponding new ssa-names used in the new duplicated
+ loop copy. IS_NEW_LOOP indicates which of the two args of the phi
+ nodes in UPDATE_BB takes the original ssa-name, and which takes the
+ new name: If IS_NEW_LOOP is TRUE, the phi-arg that is associated with
+ the LOOP-exit-edge takes the new-name, and the phi-arg that is
+ associated with GUARD_EDGE takes the original name. If IS_NEW_LOOP is
+ FALSE, it's the other way around.
+ */
+static void
+slpeel_update_phi_nodes_for_guard (edge guard_edge,
+ struct loop *loop,
+ bool entry_phis,
+ bool is_new_loop)
+{
+ tree orig_phi, new_phi, update_phi;
+ tree guard_arg, loop_arg;
+ basic_block new_merge_bb = guard_edge->dest;
+ edge e = EDGE_SUCC (new_merge_bb, 0);
+ basic_block update_bb = e->dest;
+ basic_block orig_bb = (entry_phis ? loop->header : update_bb);
+
+ for (orig_phi = phi_nodes (orig_bb), update_phi = phi_nodes (update_bb);
+ orig_phi && update_phi;
+ orig_phi = PHI_CHAIN (orig_phi), update_phi = PHI_CHAIN (update_phi))
+ {
+ /* 1. Generate new phi node in NEW_MERGE_BB: */
+ new_phi = create_phi_node (SSA_NAME_VAR (PHI_RESULT (orig_phi)),
+ new_merge_bb);
+
+ /* 2. NEW_MERGE_BB has two incoming edges: GUARD_EDGE and the exit-edge
+ of LOOP. Set the two phi args in NEW_PHI for these edges: */
+ if (entry_phis)
+ {
+ loop_arg = PHI_ARG_DEF_FROM_EDGE (orig_phi,
+ loop_latch_edge (loop));
+ guard_arg = PHI_ARG_DEF_FROM_EDGE (orig_phi,
+ loop_preheader_edge (loop));
+ }
+ else /* exit phis */
+ {
+ tree orig_def = PHI_ARG_DEF_FROM_EDGE (orig_phi, e);
+ tree *new_name_ptr = SSA_NAME_AUX (orig_def);
+ tree new_name;
+
+ if (new_name_ptr)
+ new_name = *new_name_ptr;
+ else
+ /* Something defined outside of the loop */
+ new_name = orig_def;
+
+ if (is_new_loop)
+ {
+ guard_arg = orig_def;
+ loop_arg = new_name;
+ }
+ else
+ {
+ guard_arg = new_name;
+ loop_arg = orig_def;
+ }
+ }
+ add_phi_arg (new_phi, loop_arg, loop->single_exit);
+ add_phi_arg (new_phi, guard_arg, guard_edge);
- /* This pass may take place at function granularity instead of at loop
- granularity. */
+ /* 3. Update phi in successor block. */
+ gcc_assert (PHI_ARG_DEF_FROM_EDGE (update_phi, e) == loop_arg
+ || PHI_ARG_DEF_FROM_EDGE (update_phi, e) == guard_arg);
+ SET_PHI_ARG_DEF (update_phi, e->dest_idx, PHI_RESULT (new_phi));
+ }
- vect_compute_data_refs_alignment (loop_vinfo);
+ set_phi_nodes (new_merge_bb, phi_reverse (phi_nodes (new_merge_bb)));
+}
- /* This pass will use loop versioning and loop peeling in order to enhance
- the alignment of data references in the loop.
- FOR NOW: we assume that whatever versioning/peeling took place, the
- original loop is to be vectorized. Any other loops that were created by
- the transformations performed in this pass - are not supposed to be
- vectorized. This restriction will be relaxed. */
+/* Make the LOOP iterate NITERS times. This is done by adding a new IV
+ that starts at zero, increases by one and its limit is NITERS.
- vect_enhance_data_refs_alignment (loop_vinfo);
+ Assumption: the exit-condition of LOOP is the last stmt in the loop. */
+void
+slpeel_make_loop_iterate_ntimes (struct loop *loop, tree niters)
+{
+ tree indx_before_incr, indx_after_incr, cond_stmt, cond;
+ tree orig_cond;
+ edge exit_edge = loop->single_exit;
+ block_stmt_iterator loop_cond_bsi;
+ block_stmt_iterator incr_bsi;
+ bool insert_after;
+ tree begin_label = tree_block_label (loop->latch);
+ tree exit_label = tree_block_label (loop->single_exit->dest);
+ tree init = build_int_cst (TREE_TYPE (niters), 0);
+ tree step = build_int_cst (TREE_TYPE (niters), 1);
+ tree then_label;
+ tree else_label;
+ LOC loop_loc;
+
+ orig_cond = get_loop_exit_condition (loop);
+#ifdef ENABLE_CHECKING
+ gcc_assert (orig_cond);
+#endif
+ loop_cond_bsi = bsi_for_stmt (orig_cond);
- /* Finally, check that loop can be vectorized.
- FOR NOW: Until support for misaligned accesses is in place, only if all
- accesses are aligned can the loop be vectorized. This restriction will be
- relaxed. */
+ standard_iv_increment_position (loop, &incr_bsi, &insert_after);
+ create_iv (init, step, NULL_TREE, loop,
+ &incr_bsi, insert_after, &indx_before_incr, &indx_after_incr);
- for (i = 0; i < VARRAY_ACTIVE_SIZE (loop_write_datarefs); i++)
+ if (exit_edge->flags & EDGE_TRUE_VALUE) /* 'then' edge exits the loop. */
{
- struct data_reference *dr = VARRAY_GENERIC_PTR (loop_write_datarefs, i);
- if (!aligned_access_p (dr))
- {
- if (vect_debug_stats (LOOP_VINFO_LOOP (loop_vinfo))
- || vect_debug_details (LOOP_VINFO_LOOP (loop_vinfo)))
- fprintf (dump_file, "not vectorized: unaligned store.");
- return false;
- }
+ cond = build2 (GE_EXPR, boolean_type_node, indx_after_incr, niters);
+ then_label = build1 (GOTO_EXPR, void_type_node, exit_label);
+ else_label = build1 (GOTO_EXPR, void_type_node, begin_label);
+ }
+ else /* 'then' edge loops back. */
+ {
+ cond = build2 (LT_EXPR, boolean_type_node, indx_after_incr, niters);
+ then_label = build1 (GOTO_EXPR, void_type_node, begin_label);
+ else_label = build1 (GOTO_EXPR, void_type_node, exit_label);
}
- for (i = 0; i < VARRAY_ACTIVE_SIZE (loop_read_datarefs); i++)
+ cond_stmt = build3 (COND_EXPR, TREE_TYPE (orig_cond), cond,
+ then_label, else_label);
+ bsi_insert_before (&loop_cond_bsi, cond_stmt, BSI_SAME_STMT);
+
+ /* Remove old loop exit test: */
+ bsi_remove (&loop_cond_bsi);
+
+ loop_loc = find_loop_location (loop);
+ if (dump_file && (dump_flags & TDF_DETAILS))
{
- struct data_reference *dr = VARRAY_GENERIC_PTR (loop_read_datarefs, i);
- if (!aligned_access_p (dr))
- {
- if (vect_debug_stats (LOOP_VINFO_LOOP (loop_vinfo))
- || vect_debug_details (LOOP_VINFO_LOOP (loop_vinfo)))
- fprintf (dump_file, "not vectorized: unaligned load.");
- return false;
- }
+ if (loop_loc != UNKNOWN_LOC)
+ fprintf (dump_file, "\nloop at %s:%d: ",
+ LOC_FILE (loop_loc), LOC_LINE (loop_loc));
+ print_generic_expr (dump_file, cond_stmt, TDF_SLIM);
}
- return true;
+ loop->nb_iterations = niters;
}
-/* Function vect_analyze_data_ref_access.
+/* Given LOOP this function generates a new copy of it and puts it
+ on E which is either the entry or exit of LOOP. */
- Analyze the access pattern of the data-reference DR. For now, a data access
- has to consecutive and aligned to be considered vectorizable. */
-
-static bool
-vect_analyze_data_ref_access (struct data_reference *dr)
+static struct loop *
+slpeel_tree_duplicate_loop_to_edge_cfg (struct loop *loop, struct loops *loops,
+ edge e)
{
- varray_type access_fns = DR_ACCESS_FNS (dr);
- tree access_fn;
- tree init, step;
- unsigned int dimensions, i;
+ struct loop *new_loop;
+ basic_block *new_bbs, *bbs;
+ bool at_exit;
+ bool was_imm_dom;
+ basic_block exit_dest;
+ tree phi, phi_arg;
- /* Check that in case of multidimensional array ref A[i1][i2]..[iN],
- i1, i2, ..., iN-1 are loop invariant (to make sure that the memory
- access is contiguous). */
- dimensions = VARRAY_ACTIVE_SIZE (access_fns);
+ at_exit = (e == loop->single_exit);
+ if (!at_exit && e != loop_preheader_edge (loop))
+ return NULL;
- for (i = 1; i < dimensions; i++) /* Not including the last dimension. */
+ bbs = get_loop_body (loop);
+
+ /* Check whether duplication is possible. */
+ if (!can_copy_bbs_p (bbs, loop->num_nodes))
{
- access_fn = DR_ACCESS_FN (dr, i);
+ free (bbs);
+ return NULL;
+ }
- if (evolution_part_in_loop_num (access_fn,
- loop_containing_stmt (DR_STMT (dr))->num))
- {
- /* Evolution part is not NULL in this loop (it is neither constant nor
- invariant). */
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file,
- "not vectorized: complicated multidimensional array access.");
- print_generic_expr (dump_file, access_fn, TDF_SLIM);
- }
- return false;
- }
+ /* Generate new loop structure. */
+ new_loop = duplicate_loop (loops, loop, loop->outer);
+ if (!new_loop)
+ {
+ free (bbs);
+ return NULL;
}
-
- access_fn = DR_ACCESS_FN (dr, 0); /* The last dimension access function. */
- if (!evolution_function_is_constant_p (access_fn)
- && !vect_is_simple_iv_evolution (loop_containing_stmt (DR_STMT (dr))->num,
- access_fn, &init, &step, true))
+
+ exit_dest = loop->single_exit->dest;
+ was_imm_dom = (get_immediate_dominator (CDI_DOMINATORS,
+ exit_dest) == loop->header ?
+ true : false);
+
+ new_bbs = xmalloc (sizeof (basic_block) * loop->num_nodes);
+
+ copy_bbs (bbs, loop->num_nodes, new_bbs,
+ &loop->single_exit, 1, &new_loop->single_exit, NULL);
+
+ /* Duplicating phi args at exit bbs as coming
+ also from exit of duplicated loop. */
+ for (phi = phi_nodes (exit_dest); phi; phi = PHI_CHAIN (phi))
{
- if (vect_debug_details (NULL))
+ phi_arg = PHI_ARG_DEF_FROM_EDGE (phi, loop->single_exit);
+ if (phi_arg)
{
- fprintf (dump_file, "not vectorized: too complicated access function.");
- print_generic_expr (dump_file, access_fn, TDF_SLIM);
+ edge new_loop_exit_edge;
+
+ if (EDGE_SUCC (new_loop->header, 0)->dest == new_loop->latch)
+ new_loop_exit_edge = EDGE_SUCC (new_loop->header, 1);
+ else
+ new_loop_exit_edge = EDGE_SUCC (new_loop->header, 0);
+
+ add_phi_arg (phi, phi_arg, new_loop_exit_edge);
}
- return false;
+ }
+
+ if (at_exit) /* Add the loop copy at exit. */
+ {
+ redirect_edge_and_branch_force (e, new_loop->header);
+ set_immediate_dominator (CDI_DOMINATORS, new_loop->header, e->src);
+ if (was_imm_dom)
+ set_immediate_dominator (CDI_DOMINATORS, exit_dest, new_loop->header);
+ }
+ else /* Add the copy at entry. */
+ {
+ edge new_exit_e;
+ edge entry_e = loop_preheader_edge (loop);
+ basic_block preheader = entry_e->src;
+
+ if (!flow_bb_inside_loop_p (new_loop,
+ EDGE_SUCC (new_loop->header, 0)->dest))
+ new_exit_e = EDGE_SUCC (new_loop->header, 0);
+ else
+ new_exit_e = EDGE_SUCC (new_loop->header, 1);
+
+ redirect_edge_and_branch_force (new_exit_e, loop->header);
+ set_immediate_dominator (CDI_DOMINATORS, loop->header,
+ new_exit_e->src);
+
+ /* We have to add phi args to the loop->header here as coming
+ from new_exit_e edge. */
+ for (phi = phi_nodes (loop->header); phi; phi = PHI_CHAIN (phi))
+ {
+ phi_arg = PHI_ARG_DEF_FROM_EDGE (phi, entry_e);
+ if (phi_arg)
+ add_phi_arg (phi, phi_arg, new_exit_e);
+ }
+
+ redirect_edge_and_branch_force (entry_e, new_loop->header);
+ set_immediate_dominator (CDI_DOMINATORS, new_loop->header, preheader);
}
-
- return true;
+
+ free (new_bbs);
+ free (bbs);
+
+ return new_loop;
}
-/* Function vect_analyze_data_ref_accesses.
+/* Given the condition statement COND, put it as the last statement
+ of GUARD_BB; EXIT_BB is the basic block to skip the loop;
+ Assumes that this is the single exit of the guarded loop.
+ Returns the skip edge. */
- Analyze the access pattern of all the data references in the loop.
+static edge
+slpeel_add_loop_guard (basic_block guard_bb, tree cond, basic_block exit_bb,
+ basic_block dom_bb)
+{
+ block_stmt_iterator bsi;
+ edge new_e, enter_e;
+ tree cond_stmt, then_label, else_label;
+
+ enter_e = EDGE_SUCC (guard_bb, 0);
+ enter_e->flags &= ~EDGE_FALLTHRU;
+ enter_e->flags |= EDGE_FALSE_VALUE;
+ bsi = bsi_last (guard_bb);
+
+ then_label = build1 (GOTO_EXPR, void_type_node,
+ tree_block_label (exit_bb));
+ else_label = build1 (GOTO_EXPR, void_type_node,
+ tree_block_label (enter_e->dest));
+ cond_stmt = build3 (COND_EXPR, void_type_node, cond,
+ then_label, else_label);
+ bsi_insert_after (&bsi, cond_stmt, BSI_NEW_STMT);
+ /* Add new edge to connect entry block to the second loop. */
+ new_e = make_edge (guard_bb, exit_bb, EDGE_TRUE_VALUE);
+ set_immediate_dominator (CDI_DOMINATORS, exit_bb, dom_bb);
+ return new_e;
+}
- FORNOW: the only access pattern that is considered vectorizable is a
- simple step 1 (consecutive) access.
- FORNOW: handle only arrays and pointer accesses. */
+/* This function verifies that the following restrictions apply to LOOP:
+ (1) it is innermost
+ (2) it consists of exactly 2 basic blocks - header, and an empty latch.
+ (3) it is single entry, single exit
+ (4) its exit condition is the last stmt in the header
+ (5) E is the entry/exit edge of LOOP.
+ */
-static bool
-vect_analyze_data_ref_accesses (loop_vec_info loop_vinfo)
+bool
+slpeel_can_duplicate_loop_p (struct loop *loop, edge e)
{
- unsigned int i;
- varray_type loop_write_datarefs = LOOP_VINFO_DATAREF_WRITES (loop_vinfo);
- varray_type loop_read_datarefs = LOOP_VINFO_DATAREF_READS (loop_vinfo);
+ edge exit_e = loop->single_exit;
+ edge entry_e = loop_preheader_edge (loop);
+ tree orig_cond = get_loop_exit_condition (loop);
+ block_stmt_iterator loop_exit_bsi = bsi_last (exit_e->src);
- if (vect_debug_details (NULL))
- fprintf (dump_file, "\n<<vect_analyze_data_ref_accesses>>\n");
-
- for (i = 0; i < VARRAY_ACTIVE_SIZE (loop_write_datarefs); i++)
- {
- struct data_reference *dr = VARRAY_GENERIC_PTR (loop_write_datarefs, i);
- bool ok = vect_analyze_data_ref_access (dr);
- if (!ok)
- {
- if (vect_debug_stats (LOOP_VINFO_LOOP (loop_vinfo))
- || vect_debug_details (LOOP_VINFO_LOOP (loop_vinfo)))
- fprintf (dump_file, "not vectorized: complicated access pattern.");
- return false;
- }
- }
+ if (any_marked_for_rewrite_p ())
+ return false;
- for (i = 0; i < VARRAY_ACTIVE_SIZE (loop_read_datarefs); i++)
- {
- struct data_reference *dr = VARRAY_GENERIC_PTR (loop_read_datarefs, i);
- bool ok = vect_analyze_data_ref_access (dr);
- if (!ok)
- {
- if (vect_debug_stats (LOOP_VINFO_LOOP (loop_vinfo))
- || vect_debug_details (LOOP_VINFO_LOOP (loop_vinfo)))
- fprintf (dump_file, "not vectorized: complicated access pattern.");
- return false;
- }
- }
+ if (loop->inner
+ /* All loops have an outer scope; the only case loop->outer is NULL is for
+ the function itself. */
+ || !loop->outer
+ || loop->num_nodes != 2
+ || !empty_block_p (loop->latch)
+ || !loop->single_exit
+ /* Verify that new loop exit condition can be trivially modified. */
+ || (!orig_cond || orig_cond != bsi_stmt (loop_exit_bsi))
+ || (e != exit_e && e != entry_e))
+ return false;
return true;
}
+#ifdef ENABLE_CHECKING
+void
+slpeel_verify_cfg_after_peeling (struct loop *first_loop,
+ struct loop *second_loop)
+{
+ basic_block loop1_exit_bb = first_loop->single_exit->dest;
+ basic_block loop2_entry_bb = loop_preheader_edge (second_loop)->src;
+ basic_block loop1_entry_bb = loop_preheader_edge (first_loop)->src;
+
+ /* A guard that controls whether the second_loop is to be executed or skipped
+ is placed in first_loop->exit. first_loopt->exit therefore has two
+ successors - one is the preheader of second_loop, and the other is a bb
+ after second_loop.
+ */
+ gcc_assert (EDGE_COUNT (loop1_exit_bb->succs) == 2);
+
+ /* 1. Verify that one of the successors of first_loopt->exit is the preheader
+ of second_loop. */
+
+ /* The preheader of new_loop is expected to have two predessors:
+ first_loop->exit and the block that precedes first_loop. */
+
+ gcc_assert (EDGE_COUNT (loop2_entry_bb->preds) == 2
+ && ((EDGE_PRED (loop2_entry_bb, 0)->src == loop1_exit_bb
+ && EDGE_PRED (loop2_entry_bb, 1)->src == loop1_entry_bb)
+ || (EDGE_PRED (loop2_entry_bb, 1)->src == loop1_exit_bb
+ && EDGE_PRED (loop2_entry_bb, 0)->src == loop1_entry_bb)));
+
+ /* Verify that the other successor of first_loopt->exit is after the
+ second_loop. */
+ /* TODO */
+}
+#endif
+
+/* Function slpeel_tree_peel_loop_to_edge.
-/* Function vect_analyze_pointer_ref_access.
+ Peel the first (last) iterations of LOOP into a new prolog (epilog) loop
+ that is placed on the entry (exit) edge E of LOOP. After this transformation
+ we have two loops one after the other - first-loop iterates FIRST_NITERS
+ times, and second-loop iterates the remainder NITERS - FIRST_NITERS times.
Input:
- STMT - a stmt that contains a data-ref
- MEMREF - a data-ref in STMT, which is an INDIRECT_REF.
+ - LOOP: the loop to be peeled.
+ - E: the exit or entry edge of LOOP.
+ If it is the entry edge, we peel the first iterations of LOOP. In this
+ case first-loop is LOOP, and second-loop is the newly created loop.
+ If it is the exit edge, we peel the last iterations of LOOP. In this
+ case, first-loop is the newly created loop, and second-loop is LOOP.
+ - NITERS: the number of iterations that LOOP iterates.
+ - FIRST_NITERS: the number of iterations that the first-loop should iterate.
+ - UPDATE_FIRST_LOOP_COUNT: specified whether this function is responsible
+ for updating the loop bound of the first-loop to FIRST_NITERS. If it
+ is false, the caller of this function may want to take care of this
+ (this can be useful if we don't want new stmts added to first-loop).
- If the data-ref access is vectorizable, return a data_reference structure
- that represents it (DR). Otherwise - return NULL. */
+ Output:
+ The function returns a pointer to the new loop-copy, or NULL if it failed
+ to perform the transformation.
+
+ The function generates two if-then-else guards: one before the first loop,
+ and the other before the second loop:
+ The first guard is:
+ if (FIRST_NITERS == 0) then skip the first loop,
+ and go directly to the second loop.
+ The second guard is:
+ if (FIRST_NITERS == NITERS) then skip the second loop.
+
+ FORNOW only simple loops are supported (see slpeel_can_duplicate_loop_p).
+ FORNOW the resulting code will not be in loop-closed-ssa form.
+*/
-static struct data_reference *
-vect_analyze_pointer_ref_access (tree memref, tree stmt, bool is_read)
+struct loop*
+slpeel_tree_peel_loop_to_edge (struct loop *loop, struct loops *loops,
+ edge e, tree first_niters,
+ tree niters, bool update_first_loop_count)
{
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- struct loop *loop = STMT_VINFO_LOOP (stmt_info);
- tree access_fn = analyze_scalar_evolution (loop, TREE_OPERAND (memref, 0));
- tree init, step;
- int step_val;
- tree reftype, innertype;
- enum machine_mode innermode;
- tree indx_access_fn;
- int loopnum = loop->num;
- struct data_reference *dr;
-
- if (!access_fn)
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: complicated pointer access.");
- return NULL;
- }
+ struct loop *new_loop = NULL, *first_loop, *second_loop;
+ edge skip_e;
+ tree pre_condition;
+ bitmap definitions;
+ basic_block bb_before_second_loop, bb_after_second_loop;
+ basic_block bb_before_first_loop;
+ basic_block bb_between_loops;
+ edge exit_e = loop->single_exit;
+ LOC loop_loc;
+
+ if (!slpeel_can_duplicate_loop_p (loop, e))
+ return NULL;
+
+ /* We have to initialize cfg_hooks. Then, when calling
+ cfg_hooks->split_edge, the function tree_split_edge
+ is actually called and, when calling cfg_hooks->duplicate_block,
+ the function tree_duplicate_bb is called. */
+ tree_register_cfg_hooks ();
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "Access function of ptr: ");
- print_generic_expr (dump_file, access_fn, TDF_SLIM);
- }
- if (!vect_is_simple_iv_evolution (loopnum, access_fn, &init, &step, false))
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: pointer access is not simple.");
- return NULL;
- }
-
- STRIP_NOPS (init);
+ /* 1. Generate a copy of LOOP and put it on E (E is the entry/exit of LOOP).
+ Resulting CFG would be:
- if (!host_integerp (step,0))
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file,
- "not vectorized: non constant step for pointer access.");
- return NULL;
- }
+ first_loop:
+ do {
+ } while ...
- step_val = TREE_INT_CST_LOW (step);
+ second_loop:
+ do {
+ } while ...
- reftype = TREE_TYPE (TREE_OPERAND (memref, 0));
- if (TREE_CODE (reftype) != POINTER_TYPE)
+ orig_exit_bb:
+ */
+
+ if (!(new_loop = slpeel_tree_duplicate_loop_to_edge_cfg (loop, loops, e)))
{
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: unexpected pointer access form.");
+ loop_loc = find_loop_location (loop);
+ if (dump_file && (dump_flags & TDF_DETAILS))
+ {
+ if (loop_loc != UNKNOWN_LOC)
+ fprintf (dump_file, "\n%s:%d: note: ",
+ LOC_FILE (loop_loc), LOC_LINE (loop_loc));
+ fprintf (dump_file, "tree_duplicate_loop_to_edge_cfg failed.\n");
+ }
return NULL;
}
-
- reftype = TREE_TYPE (init);
- if (TREE_CODE (reftype) != POINTER_TYPE)
+
+ if (e == exit_e)
{
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: unexpected pointer access form.");
- return NULL;
+ /* NEW_LOOP was placed after LOOP. */
+ first_loop = loop;
+ second_loop = new_loop;
}
-
- innertype = TREE_TYPE (reftype);
- innermode = TYPE_MODE (innertype);
- if (GET_MODE_SIZE (innermode) != step_val)
+ else
{
- /* FORNOW: support only consecutive access */
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: non consecutive access.");
- return NULL;
+ /* NEW_LOOP was placed before LOOP. */
+ first_loop = new_loop;
+ second_loop = loop;
}
- indx_access_fn =
- build_polynomial_chrec (loopnum, integer_zero_node, integer_one_node);
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "Access function of ptr indx: ");
- print_generic_expr (dump_file, indx_access_fn, TDF_SLIM);
- }
- dr = init_data_ref (stmt, memref, init, indx_access_fn, is_read);
- return dr;
-}
+ definitions = marked_ssa_names ();
+ allocate_new_names (definitions);
+ slpeel_update_phis_for_duplicate_loop (loop, new_loop, e == exit_e);
+ rename_variables_in_loop (new_loop);
-/* Function vect_get_symbl_and_dr.
+ /* 2. Add the guard that controls whether the first loop is executed.
+ Resulting CFG would be:
- The function returns SYMBL - the relevant variable for
- memory tag (for aliasing purposes).
- Also data reference structure DR is created.
+ bb_before_first_loop:
+ if (FIRST_NITERS == 0) GOTO bb_before_second_loop
+ GOTO first-loop
- Input:
- MEMREF - data reference in STMT
- IS_READ - TRUE if STMT reads from MEMREF, FALSE if writes to MEMREF
-
- Output:
- DR - data_reference struct for MEMREF
- return value - the relevant variable for memory tag (for aliasing purposes).
+ first_loop:
+ do {
+ } while ...
-*/
+ bb_before_second_loop:
-static tree
-vect_get_symbl_and_dr (tree memref, tree stmt, bool is_read,
- loop_vec_info loop_vinfo, struct data_reference **dr)
-{
- tree symbl, oprnd0, oprnd1;
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- tree offset;
- tree array_base, base;
- struct data_reference *new_dr;
- bool base_aligned_p;
-
- *dr = NULL;
- switch (TREE_CODE (memref))
- {
- case INDIRECT_REF:
- new_dr = vect_analyze_pointer_ref_access (memref, stmt, is_read);
- if (! new_dr)
- return NULL_TREE;
- *dr = new_dr;
- symbl = DR_BASE_NAME (new_dr);
- STMT_VINFO_VECT_DR_BASE (stmt_info) = symbl;
-
- switch (TREE_CODE (symbl))
- {
- case PLUS_EXPR:
- case MINUS_EXPR:
- oprnd0 = TREE_OPERAND (symbl, 0);
- oprnd1 = TREE_OPERAND (symbl, 1);
-
- STRIP_NOPS(oprnd1);
- /* Only {address_base + offset} expressions are supported,
- where address_base can be POINTER_TYPE or ARRRAY_TYPE and
- offset can be anything but POINTER_TYPE or ARRAY_TYPE.
- TODO: swap operands if {offset + address_base}. */
- if ((TREE_CODE (TREE_TYPE (oprnd1)) == POINTER_TYPE
- && TREE_CODE (oprnd1) != INTEGER_CST)
- || TREE_CODE (TREE_TYPE (oprnd1)) == ARRAY_TYPE)
- return NULL_TREE;
-
- if (TREE_CODE (TREE_TYPE (oprnd0)) == POINTER_TYPE)
- symbl = oprnd0;
- else
- symbl = vect_get_symbl_and_dr (oprnd0, stmt, is_read,
- loop_vinfo, &new_dr);
-
- case SSA_NAME:
- case ADDR_EXPR:
- /* symbl remains unchanged. */
- break;
-
- default:
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "unhandled data ref: ");
- print_generic_expr (dump_file, memref, TDF_SLIM);
- fprintf (dump_file, " (symbl ");
- print_generic_expr (dump_file, symbl, TDF_SLIM);
- fprintf (dump_file, ") in stmt ");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
- return NULL_TREE;
- }
- break;
+ second_loop:
+ do {
+ } while ...
+
+ orig_exit_bb:
+ */
- case ARRAY_REF:
- offset = size_zero_node;
- array_base = TREE_OPERAND (memref, 0);
+ bb_before_first_loop = split_edge (loop_preheader_edge (first_loop));
+ add_bb_to_loop (bb_before_first_loop, first_loop->outer);
+ bb_before_second_loop = split_edge (first_loop->single_exit);
+ add_bb_to_loop (bb_before_second_loop, first_loop->outer);
- /* Store the array base in the stmt info.
- For one dimensional array ref a[i], the base is a,
- for multidimensional a[i1][i2]..[iN], the base is
- a[i1][i2]..[iN-1]. */
- array_base = TREE_OPERAND (memref, 0);
- STMT_VINFO_VECT_DR_BASE (stmt_info) = array_base;
+ pre_condition =
+ build2 (LE_EXPR, boolean_type_node, first_niters, integer_zero_node);
+ skip_e = slpeel_add_loop_guard (bb_before_first_loop, pre_condition,
+ bb_before_second_loop, bb_before_first_loop);
+ slpeel_update_phi_nodes_for_guard (skip_e, first_loop, true /* entry-phis */,
+ first_loop == new_loop);
- new_dr = analyze_array (stmt, memref, is_read);
- *dr = new_dr;
- /* Find the relevant symbol for aliasing purposes. */
- base = DR_BASE_NAME (new_dr);
- switch (TREE_CODE (base))
- {
- case VAR_DECL:
- symbl = base;
- break;
-
- case INDIRECT_REF:
- symbl = TREE_OPERAND (base, 0);
- break;
-
- case COMPONENT_REF:
- /* Could have recorded more accurate information -
- i.e, the actual FIELD_DECL that is being referenced -
- but later passes expect VAR_DECL as the nmt. */
- symbl = vect_get_base_and_bit_offset (new_dr, base, NULL_TREE,
- loop_vinfo, &offset, &base_aligned_p);
- if (symbl)
- break;
- /* fall through */
- default:
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "unhandled struct/class field access ");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
- return NULL_TREE;
- }
- break;
+ /* 3. Add the guard that controls whether the second loop is executed.
+ Resulting CFG would be:
- default:
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "unhandled data ref: ");
- print_generic_expr (dump_file, memref, TDF_SLIM);
- fprintf (dump_file, " in stmt ");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
- return NULL_TREE;
- }
- return symbl;
-}
+ bb_before_first_loop:
+ if (FIRST_NITERS == 0) GOTO bb_before_second_loop (skip first loop)
+ GOTO first-loop
+ first_loop:
+ do {
+ } while ...
-/* Function vect_analyze_data_refs.
+ bb_between_loops:
+ if (FIRST_NITERS == NITERS) GOTO bb_after_second_loop (skip second loop)
+ GOTO bb_before_second_loop
- Find all the data references in the loop.
+ bb_before_second_loop:
- FORNOW: Handle aligned INDIRECT_REFs and ARRAY_REFs
- which base is really an array (not a pointer) and which alignment
- can be forced. This restriction will be relaxed. */
+ second_loop:
+ do {
+ } while ...
-static bool
-vect_analyze_data_refs (loop_vec_info loop_vinfo)
+ bb_after_second_loop:
+
+ orig_exit_bb:
+ */
+
+ bb_between_loops = split_edge (first_loop->single_exit);
+ add_bb_to_loop (bb_between_loops, first_loop->outer);
+ bb_after_second_loop = split_edge (second_loop->single_exit);
+ add_bb_to_loop (bb_after_second_loop, second_loop->outer);
+
+ pre_condition = build2 (EQ_EXPR, boolean_type_node, first_niters, niters);
+ skip_e = slpeel_add_loop_guard (bb_between_loops, pre_condition,
+ bb_after_second_loop, bb_before_first_loop);
+ slpeel_update_phi_nodes_for_guard (skip_e, second_loop, false /* exit-phis */,
+ second_loop == new_loop);
+
+ /* Flow loop scan does not update loop->single_exit field. */
+ first_loop->single_exit = first_loop->single_exit;
+ second_loop->single_exit = second_loop->single_exit;
+
+ /* 4. Make first-loop iterate FIRST_NITERS times, if requested.
+ */
+ if (update_first_loop_count)
+ slpeel_make_loop_iterate_ntimes (first_loop, first_niters);
+
+ free_new_names (definitions);
+ BITMAP_FREE (definitions);
+ unmark_all_for_rewrite ();
+
+ return new_loop;
+}
+
+/* Function vect_get_loop_location.
+
+ Extract the location of the loop in the source code.
+ If the loop is not well formed for vectorization, an estimated
+ location is calculated.
+ Return the loop location if succeed and NULL if not. */
+
+LOC
+find_loop_location (struct loop *loop)
{
- struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
- basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo);
- int nbbs = loop->num_nodes;
+ tree node = NULL_TREE;
+ basic_block bb;
block_stmt_iterator si;
- int j;
- struct data_reference *dr;
- tree tag;
- tree address_base;
- if (vect_debug_details (NULL))
- fprintf (dump_file, "\n<<vect_analyze_data_refs>>\n");
+ if (!loop)
+ return UNKNOWN_LOC;
- for (j = 0; j < nbbs; j++)
+ node = get_loop_exit_condition (loop);
+
+ if (node && EXPR_P (node) && EXPR_HAS_LOCATION (node)
+ && EXPR_FILENAME (node) && EXPR_LINENO (node))
+ return EXPR_LOC (node);
+
+ /* If we got here the loop is probably not "well formed",
+ try to estimate the loop location */
+
+ if (!loop->header)
+ return UNKNOWN_LOC;
+
+ bb = loop->header;
+
+ for (si = bsi_start (bb); !bsi_end_p (si); bsi_next (&si))
{
- basic_block bb = bbs[j];
- for (si = bsi_start (bb); !bsi_end_p (si); bsi_next (&si))
- {
- bool is_read = false;
- tree stmt = bsi_stmt (si);
- stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- v_may_def_optype v_may_defs = STMT_V_MAY_DEF_OPS (stmt);
- v_must_def_optype v_must_defs = STMT_V_MUST_DEF_OPS (stmt);
- vuse_optype vuses = STMT_VUSE_OPS (stmt);
- varray_type *datarefs = NULL;
- int nvuses, nv_may_defs, nv_must_defs;
- tree memref = NULL;
- tree symbl;
-
- /* Assumption: there exists a data-ref in stmt, if and only if
- it has vuses/vdefs. */
-
- if (!vuses && !v_may_defs && !v_must_defs)
- continue;
-
- nvuses = NUM_VUSES (vuses);
- nv_may_defs = NUM_V_MAY_DEFS (v_may_defs);
- nv_must_defs = NUM_V_MUST_DEFS (v_must_defs);
-
- if (nvuses && (nv_may_defs || nv_must_defs))
- {
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "unexpected vdefs and vuses in stmt: ");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
- return false;
- }
-
- if (TREE_CODE (stmt) != MODIFY_EXPR)
- {
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "unexpected vops in stmt: ");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
- return false;
- }
-
- if (vuses)
- {
- memref = TREE_OPERAND (stmt, 1);
- datarefs = &(LOOP_VINFO_DATAREF_READS (loop_vinfo));
- is_read = true;
- }
- else /* vdefs */
- {
- memref = TREE_OPERAND (stmt, 0);
- datarefs = &(LOOP_VINFO_DATAREF_WRITES (loop_vinfo));
- is_read = false;
- }
-
- /* Analyze MEMREF. If it is of a supported form, build data_reference
- struct for it (DR) and find the relevant symbol for aliasing
- purposes. */
- symbl = vect_get_symbl_and_dr (memref, stmt, is_read, loop_vinfo, &dr);
- if (!symbl)
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- {
- fprintf (dump_file, "not vectorized: unhandled data ref: ");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
- return false;
- }
-
- /* Find and record the memtag assigned to this data-ref. */
- switch (TREE_CODE (symbl))
- {
- case VAR_DECL:
- STMT_VINFO_MEMTAG (stmt_info) = symbl;
- break;
-
- case SSA_NAME:
- symbl = SSA_NAME_VAR (symbl);
- tag = get_var_ann (symbl)->type_mem_tag;
- if (!tag)
- {
- tree ptr = TREE_OPERAND (memref, 0);
- if (TREE_CODE (ptr) == SSA_NAME)
- tag = get_var_ann (SSA_NAME_VAR (ptr))->type_mem_tag;
- }
- if (!tag)
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: no memtag for ref.");
- return false;
- }
- STMT_VINFO_MEMTAG (stmt_info) = tag;
- break;
-
- case ADDR_EXPR:
- address_base = TREE_OPERAND (symbl, 0);
-
- switch (TREE_CODE (address_base))
- {
- case ARRAY_REF:
- dr = analyze_array (stmt, TREE_OPERAND (symbl, 0), DR_IS_READ(dr));
- STMT_VINFO_MEMTAG (stmt_info) = DR_BASE_NAME (dr);
- break;
-
- case VAR_DECL:
- STMT_VINFO_MEMTAG (stmt_info) = address_base;
- break;
-
- default:
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- {
- fprintf (dump_file, "not vectorized: unhandled address expression: ");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
- return false;
- }
- break;
-
- default:
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- {
- fprintf (dump_file, "not vectorized: unsupported data-ref: ");
- print_generic_expr (dump_file, memref, TDF_SLIM);
- }
- return false;
- }
-
- VARRAY_PUSH_GENERIC_PTR (*datarefs, dr);
- STMT_VINFO_DATA_REF (stmt_info) = dr;
- }
+ node = bsi_stmt (si);
+ if (node && EXPR_P (node) && EXPR_HAS_LOCATION (node))
+ return EXPR_LOC (node);
}
- return true;
+ return UNKNOWN_LOC;
}
-/* Utility functions used by vect_mark_stmts_to_be_vectorized. */
+/*************************************************************************
+ Vectorization Debug Information.
+ *************************************************************************/
-/* Function vect_mark_relevant.
+/* Function vect_set_verbosity_level.
- Mark STMT as "relevant for vectorization" and add it to WORKLIST. */
+ Called from toplev.c upon detection of the
+ -ftree-vectorizer-verbose=N option. */
-static void
-vect_mark_relevant (varray_type worklist, tree stmt)
+void
+vect_set_verbosity_level (const char *val)
{
- stmt_vec_info stmt_info;
+ unsigned int vl;
+
+ vl = atoi (val);
+ if (vl < MAX_VERBOSITY_LEVEL)
+ vect_verbosity_level = vl;
+ else
+ vect_verbosity_level = MAX_VERBOSITY_LEVEL - 1;
+}
- if (vect_debug_details (NULL))
- fprintf (dump_file, "mark relevant.");
- if (TREE_CODE (stmt) == PHI_NODE)
- {
- VARRAY_PUSH_TREE (worklist, stmt);
- return;
- }
+/* Function vect_set_dump_settings.
- stmt_info = vinfo_for_stmt (stmt);
+ Fix the verbosity level of the vectorizer if the
+ requested level was not set explicitly using the flag
+ -ftree-vectorizer-verbose=N.
+ Decide where to print the debugging information (dump_file/stderr).
+ If the user defined the verbosity level, but there is no dump file,
+ print to stderr, otherwise print to the dump file. */
- if (!stmt_info)
- {
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "mark relevant: no stmt info!!.");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
- return;
- }
+static void
+vect_set_dump_settings (void)
+{
+ vect_dump = dump_file;
- if (STMT_VINFO_RELEVANT_P (stmt_info))
+ /* Check if the verbosity level was defined by the user: */
+ if (vect_verbosity_level != MAX_VERBOSITY_LEVEL)
{
- if (vect_debug_details (NULL))
- fprintf (dump_file, "already marked relevant.");
+ /* If there is no dump file, print to stderr. */
+ if (!dump_file)
+ vect_dump = stderr;
return;
}
- STMT_VINFO_RELEVANT_P (stmt_info) = 1;
- VARRAY_PUSH_TREE (worklist, stmt);
+ /* User didn't specify verbosity level: */
+ if (dump_file && (dump_flags & TDF_DETAILS))
+ vect_verbosity_level = REPORT_DETAILS;
+ else if (dump_file && (dump_flags & TDF_STATS))
+ vect_verbosity_level = REPORT_UNVECTORIZED_LOOPS;
+ else
+ vect_verbosity_level = REPORT_NONE;
+
+ gcc_assert (dump_file || vect_verbosity_level == REPORT_NONE);
}
-/* Function vect_stmt_relevant_p.
+/* Function debug_loop_details.
- Return true if STMT in loop that is represented by LOOP_VINFO is
- "relevant for vectorization".
+ For vectorization debug dumps. */
- A stmt is considered "relevant for vectorization" if:
- - it has uses outside the loop.
- - it has vdefs (it alters memory).
- - control stmts in the loop (except for the exit condition).
+bool
+vect_print_dump_info (enum verbosity_levels vl, LOC loc)
+{
+ if (vl > vect_verbosity_level)
+ return false;
- CHECKME: what other side effects would the vectorizer allow? */
+ if (loc == UNKNOWN_LOC)
+ fprintf (vect_dump, "\n%s:%d: note: ",
+ DECL_SOURCE_FILE (current_function_decl),
+ DECL_SOURCE_LINE (current_function_decl));
+ else
+ fprintf (vect_dump, "\n%s:%d: note: ", LOC_FILE (loc), LOC_LINE (loc));
-static bool
-vect_stmt_relevant_p (tree stmt, loop_vec_info loop_vinfo)
-{
- v_may_def_optype v_may_defs;
- v_must_def_optype v_must_defs;
- struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
- int i;
- dataflow_t df;
- int num_uses;
- /* cond stmt other than loop exit cond. */
- if (is_ctrl_stmt (stmt) && (stmt != LOOP_VINFO_EXIT_COND (loop_vinfo)))
- return true;
+ return true;
+}
- /* changing memory. */
- v_may_defs = STMT_V_MAY_DEF_OPS (stmt);
- v_must_defs = STMT_V_MUST_DEF_OPS (stmt);
- if (v_may_defs || v_must_defs)
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "vec_stmt_relevant_p: stmt has vdefs.");
- return true;
- }
- /* uses outside the loop. */
- df = get_immediate_uses (stmt);
- num_uses = num_immediate_uses (df);
- for (i = 0; i < num_uses; i++)
- {
- tree use = immediate_use (df, i);
- basic_block bb = bb_for_stmt (use);
- if (!flow_bb_inside_loop_p (loop, bb))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "vec_stmt_relevant_p: used out of loop.");
- return true;
- }
- }
+/*************************************************************************
+ Vectorization Utilities.
+ *************************************************************************/
- return false;
-}
+/* Function new_stmt_vec_info.
+ Create and initialize a new stmt_vec_info struct for STMT. */
-/* Function vect_mark_stmts_to_be_vectorized.
+stmt_vec_info
+new_stmt_vec_info (tree stmt, loop_vec_info loop_vinfo)
+{
+ stmt_vec_info res;
+ res = (stmt_vec_info) xcalloc (1, sizeof (struct _stmt_vec_info));
- Not all stmts in the loop need to be vectorized. For example:
+ STMT_VINFO_TYPE (res) = undef_vec_info_type;
+ STMT_VINFO_STMT (res) = stmt;
+ STMT_VINFO_LOOP_VINFO (res) = loop_vinfo;
+ STMT_VINFO_RELEVANT_P (res) = 0;
+ STMT_VINFO_VECTYPE (res) = NULL;
+ STMT_VINFO_VEC_STMT (res) = NULL;
+ STMT_VINFO_DATA_REF (res) = NULL;
+ STMT_VINFO_MEMTAG (res) = NULL;
+ STMT_VINFO_VECT_DR_BASE_ADDRESS (res) = NULL;
+ STMT_VINFO_VECT_INIT_OFFSET (res) = NULL_TREE;
+ STMT_VINFO_VECT_STEP (res) = NULL_TREE;
+ STMT_VINFO_VECT_BASE_ALIGNED_P (res) = false;
+ STMT_VINFO_VECT_MISALIGNMENT (res) = NULL_TREE;
- for i...
- for j...
- 1. T0 = i + j
- 2. T1 = a[T0]
+ return res;
+}
- 3. j = j + 1
- Stmt 1 and 3 do not need to be vectorized, because loop control and
- addressing of vectorized data-refs are handled differently.
+/* Function new_loop_vec_info.
- This pass detects such stmts. */
+ Create and initialize a new loop_vec_info struct for LOOP, as well as
+ stmt_vec_info structs for all the stmts in LOOP. */
-static bool
-vect_mark_stmts_to_be_vectorized (loop_vec_info loop_vinfo)
+loop_vec_info
+new_loop_vec_info (struct loop *loop)
{
- varray_type worklist;
- struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
- basic_block *bbs = LOOP_VINFO_BBS (loop_vinfo);
- unsigned int nbbs = loop->num_nodes;
+ loop_vec_info res;
+ basic_block *bbs;
block_stmt_iterator si;
- tree stmt;
- stmt_ann_t ann;
unsigned int i;
- int j;
- use_optype use_ops;
- stmt_vec_info stmt_info;
- if (vect_debug_details (NULL))
- fprintf (dump_file, "\n<<vect_mark_stmts_to_be_vectorized>>\n");
-
- VARRAY_TREE_INIT (worklist, 64, "work list");
+ res = (loop_vec_info) xcalloc (1, sizeof (struct _loop_vec_info));
- /* 1. Init worklist. */
+ bbs = get_loop_body (loop);
- for (i = 0; i < nbbs; i++)
+ /* Create stmt_info for all stmts in the loop. */
+ for (i = 0; i < loop->num_nodes; i++)
{
basic_block bb = bbs[i];
for (si = bsi_start (bb); !bsi_end_p (si); bsi_next (&si))
{
- stmt = bsi_stmt (si);
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "init: stmt relevant? ");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
-
- stmt_info = vinfo_for_stmt (stmt);
- STMT_VINFO_RELEVANT_P (stmt_info) = 0;
+ tree stmt = bsi_stmt (si);
+ stmt_ann_t ann;
- if (vect_stmt_relevant_p (stmt, loop_vinfo))
- vect_mark_relevant (worklist, stmt);
+ get_stmt_operands (stmt);
+ ann = stmt_ann (stmt);
+ set_stmt_info (ann, new_stmt_vec_info (stmt, res));
}
}
+ LOOP_VINFO_LOOP (res) = loop;
+ LOOP_VINFO_BBS (res) = bbs;
+ LOOP_VINFO_EXIT_COND (res) = NULL;
+ LOOP_VINFO_NITERS (res) = NULL;
+ LOOP_VINFO_VECTORIZABLE_P (res) = 0;
+ LOOP_DO_PEELING_FOR_ALIGNMENT (res) = false;
+ LOOP_VINFO_VECT_FACTOR (res) = 0;
+ VARRAY_GENERIC_PTR_INIT (LOOP_VINFO_DATAREF_WRITES (res), 20,
+ "loop_write_datarefs");
+ VARRAY_GENERIC_PTR_INIT (LOOP_VINFO_DATAREF_READS (res), 20,
+ "loop_read_datarefs");
+ LOOP_VINFO_UNALIGNED_DR (res) = NULL;
+ LOOP_VINFO_LOC (res) = UNKNOWN_LOC;
+
+ return res;
+}
- /* 2. Process_worklist */
- while (VARRAY_ACTIVE_SIZE (worklist) > 0)
- {
- stmt = VARRAY_TOP_TREE (worklist);
- VARRAY_POP (worklist);
+/* Function destroy_loop_vec_info.
+
+ Free LOOP_VINFO struct, as well as all the stmt_vec_info structs of all the
+ stmts in the loop. */
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "worklist: examine stmt: ");
- print_generic_expr (dump_file, stmt, TDF_SLIM);
- }
+void
+destroy_loop_vec_info (loop_vec_info loop_vinfo)
+{
+ struct loop *loop;
+ basic_block *bbs;
+ int nbbs;
+ block_stmt_iterator si;
+ int j;
- /* Examine the USES in this statement. Mark all the statements which
- feed this statement's uses as "relevant", unless the USE is used as
- an array index. */
+ if (!loop_vinfo)
+ return;
- if (TREE_CODE (stmt) == PHI_NODE)
- {
- /* follow the def-use chain inside the loop. */
- for (j = 0; j < PHI_NUM_ARGS (stmt); j++)
- {
- tree arg = PHI_ARG_DEF (stmt, j);
- tree def_stmt = NULL_TREE;
- basic_block bb;
- if (!vect_is_simple_use (arg, loop, &def_stmt))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "worklist: unsupported use.");
- varray_clear (worklist);
- return false;
- }
- if (!def_stmt)
- continue;
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "worklist: def_stmt: ");
- print_generic_expr (dump_file, def_stmt, TDF_SLIM);
- }
-
- bb = bb_for_stmt (def_stmt);
- if (flow_bb_inside_loop_p (loop, bb))
- vect_mark_relevant (worklist, def_stmt);
- }
- }
+ loop = LOOP_VINFO_LOOP (loop_vinfo);
- ann = stmt_ann (stmt);
- use_ops = USE_OPS (ann);
+ bbs = LOOP_VINFO_BBS (loop_vinfo);
+ nbbs = loop->num_nodes;
- for (i = 0; i < NUM_USES (use_ops); i++)
+ for (j = 0; j < nbbs; j++)
+ {
+ basic_block bb = bbs[j];
+ for (si = bsi_start (bb); !bsi_end_p (si); bsi_next (&si))
{
- tree use = USE_OP (use_ops, i);
-
- /* We are only interested in uses that need to be vectorized. Uses
- that are used for address computation are not considered relevant.
- */
- if (exist_non_indexing_operands_for_use_p (use, stmt))
- {
- tree def_stmt = NULL_TREE;
- basic_block bb;
- if (!vect_is_simple_use (use, loop, &def_stmt))
- {
- if (vect_debug_details (NULL))
- fprintf (dump_file, "worklist: unsupported use.");
- varray_clear (worklist);
- return false;
- }
-
- if (!def_stmt)
- continue;
-
- if (vect_debug_details (NULL))
- {
- fprintf (dump_file, "worklist: examine use %d: ", i);
- print_generic_expr (dump_file, use, TDF_SLIM);
- }
-
- bb = bb_for_stmt (def_stmt);
- if (flow_bb_inside_loop_p (loop, bb))
- vect_mark_relevant (worklist, def_stmt);
- }
+ tree stmt = bsi_stmt (si);
+ stmt_ann_t ann = stmt_ann (stmt);
+ stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
+ free (stmt_info);
+ set_stmt_info (ann, NULL);
}
- } /* while worklist */
+ }
- varray_clear (worklist);
- return true;
+ free (LOOP_VINFO_BBS (loop_vinfo));
+ varray_clear (LOOP_VINFO_DATAREF_WRITES (loop_vinfo));
+ varray_clear (LOOP_VINFO_DATAREF_READS (loop_vinfo));
+
+ free (loop_vinfo);
}
-/* Function vect_get_loop_niters.
+/* Function vect_strip_conversions
- Determine how many iterations the loop is executed. */
+ Strip conversions that don't narrow the mode. */
-static tree
-vect_get_loop_niters (struct loop *loop, HOST_WIDE_INT *number_of_iterations)
+tree
+vect_strip_conversion (tree expr)
{
- tree niters;
+ tree to, ti, oprnd0;
+
+ while (TREE_CODE (expr) == NOP_EXPR || TREE_CODE (expr) == CONVERT_EXPR)
+ {
+ to = TREE_TYPE (expr);
+ oprnd0 = TREE_OPERAND (expr, 0);
+ ti = TREE_TYPE (oprnd0);
+
+ if (!INTEGRAL_TYPE_P (to) || !INTEGRAL_TYPE_P (ti))
+ return NULL_TREE;
+ if (GET_MODE_SIZE (TYPE_MODE (to)) < GET_MODE_SIZE (TYPE_MODE (ti)))
+ return NULL_TREE;
+
+ expr = oprnd0;
+ }
+ return expr;
+}
- if (vect_debug_details (NULL))
- fprintf (dump_file, "\n<<get_loop_niters>>\n");
- niters = number_of_iterations_in_loop (loop);
+/* Function vect_force_dr_alignment_p.
- if (niters != NULL_TREE
- && niters != chrec_dont_know
- && host_integerp (niters,0))
- {
- *number_of_iterations = TREE_INT_CST_LOW (niters);
+ Returns whether the alignment of a DECL can be forced to be aligned
+ on ALIGNMENT bit boundary. */
- if (vect_debug_details (NULL))
- fprintf (dump_file, "==> get_loop_niters:" HOST_WIDE_INT_PRINT_DEC,
- *number_of_iterations);
- }
+bool
+vect_can_force_dr_alignment_p (tree decl, unsigned int alignment)
+{
+ if (TREE_CODE (decl) != VAR_DECL)
+ return false;
- return get_loop_exit_condition (loop);
-}
+ if (DECL_EXTERNAL (decl))
+ return false;
+ if (TREE_ASM_WRITTEN (decl))
+ return false;
-/* Function vect_analyze_loop_form.
+ if (TREE_STATIC (decl))
+ return (alignment <= MAX_OFILE_ALIGNMENT);
+ else
+ /* This is not 100% correct. The absolute correct stack alignment
+ is STACK_BOUNDARY. We're supposed to hope, but not assume, that
+ PREFERRED_STACK_BOUNDARY is honored by all translation units.
+ However, until someone implements forced stack alignment, SSE
+ isn't really usable without this. */
+ return (alignment <= PREFERRED_STACK_BOUNDARY);
+}
- Verify the following restrictions (some may be relaxed in the future):
- - it's an inner-most loop
- - number of BBs = 2 (which are the loop header and the latch)
- - the loop has a pre-header
- - the loop has a single entry and exit
- - the loop exit condition is simple enough, and the number of iterations
- can be analyzed (a countable loop). */
-static loop_vec_info
-vect_analyze_loop_form (struct loop *loop)
-{
- loop_vec_info loop_vinfo;
- tree loop_cond;
- HOST_WIDE_INT number_of_iterations = -1;
+/* Function get_vectype_for_scalar_type.
- if (vect_debug_details (loop))
- fprintf (dump_file, "\n<<vect_analyze_loop_form>>\n");
+ Returns the vector type corresponding to SCALAR_TYPE as supported
+ by the target. */
- if (loop->inner
- || !loop->single_exit
- || loop->num_nodes != 2)
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- {
- fprintf (dump_file, "not vectorized: bad loop form. ");
- if (loop->inner)
- fprintf (dump_file, "nested loop.");
- else if (!loop->single_exit)
- fprintf (dump_file, "multiple exits.");
- else if (loop->num_nodes != 2)
- fprintf (dump_file, "too many BBs in loop.");
- }
+tree
+get_vectype_for_scalar_type (tree scalar_type)
+{
+ enum machine_mode inner_mode = TYPE_MODE (scalar_type);
+ int nbytes = GET_MODE_SIZE (inner_mode);
+ int nunits;
+ tree vectype;
- return NULL;
- }
+ if (nbytes == 0)
+ return NULL_TREE;
- /* We assume that the loop exit condition is at the end of the loop. i.e,
- that the loop is represented as a do-while (with a proper if-guard
- before the loop if needed), where the loop header contains all the
- executable statements, and the latch is empty. */
- if (!empty_block_p (loop->latch))
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: unexpectd loop form.");
- return NULL;
- }
+ /* FORNOW: Only a single vector size per target (UNITS_PER_SIMD_WORD)
+ is expected. */
+ nunits = UNITS_PER_SIMD_WORD / nbytes;
- if (empty_block_p (loop->header))
+ vectype = build_vector_type (scalar_type, nunits);
+ if (vect_print_dump_info (REPORT_DETAILS, UNKNOWN_LOC))
{
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: empty loop.");
- return NULL;
+ fprintf (vect_dump, "get vectype with %d units of type ", nunits);
+ print_generic_expr (vect_dump, scalar_type, TDF_SLIM);
}
- loop_cond = vect_get_loop_niters (loop, &number_of_iterations);
- if (!loop_cond)
- {
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: complicated exit condition.");
- return NULL;
- }
+ if (!vectype)
+ return NULL_TREE;
- if (number_of_iterations < 0)
+ if (vect_print_dump_info (REPORT_DETAILS, UNKNOWN_LOC))
{
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: unknown loop bound.");
- return NULL;
+ fprintf (vect_dump, "vectype: ");
+ print_generic_expr (vect_dump, vectype, TDF_SLIM);
}
- if (number_of_iterations == 0) /* CHECKME: can this happen? */
+ if (!VECTOR_MODE_P (TYPE_MODE (vectype)))
{
- if (vect_debug_stats (loop) || vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: number of iterations = 0.");
- return NULL;
+ /* TODO: tree-complex.c sometimes can parallelize operations
+ on generic vectors. We can vectorize the loop in that case,
+ but then we should re-run the lowering pass. */
+ if (vect_print_dump_info (REPORT_DETAILS, UNKNOWN_LOC))
+ fprintf (vect_dump, "mode not supported by target.");
+ return NULL_TREE;
}
- loop_vinfo = new_loop_vec_info (loop);
- LOOP_VINFO_EXIT_COND (loop_vinfo) = loop_cond;
- LOOP_VINFO_NITERS (loop_vinfo) = number_of_iterations;
-
- return loop_vinfo;
+ return vectype;
}
-/* Function vect_analyze_loop.
+/* Function vect_supportable_dr_alignment
- Apply a set of analyses on LOOP, and create a loop_vec_info struct
- for it. The different analyses will record information in the
- loop_vec_info struct. */
+ Return whether the data reference DR is supported with respect to its
+ alignment. */
-static loop_vec_info
-vect_analyze_loop (struct loop *loop)
+enum dr_alignment_support
+vect_supportable_dr_alignment (struct data_reference *dr)
{
- bool ok;
- loop_vec_info loop_vinfo;
+ tree vectype = STMT_VINFO_VECTYPE (vinfo_for_stmt (DR_STMT (dr)));
+ enum machine_mode mode = (int) TYPE_MODE (vectype);
- if (vect_debug_details (NULL))
- fprintf (dump_file, "\n<<<<<<< analyze_loop_nest >>>>>>>\n");
+ if (aligned_access_p (dr))
+ return dr_aligned;
- /* Check the CFG characteristics of the loop (nesting, entry/exit, etc. */
-
- loop_vinfo = vect_analyze_loop_form (loop);
- if (!loop_vinfo)
+ /* Possibly unaligned access. */
+
+ if (DR_IS_READ (dr))
{
- if (vect_debug_details (loop))
- fprintf (dump_file, "bad loop form.");
- return NULL;
+ if (vec_realign_load_optab->handlers[mode].insn_code != CODE_FOR_nothing
+ && (!targetm.vectorize.builtin_mask_for_load
+ || targetm.vectorize.builtin_mask_for_load ()))
+ return dr_unaligned_software_pipeline;
+
+ if (movmisalign_optab->handlers[mode].insn_code != CODE_FOR_nothing)
+ /* Can't software pipeline the loads, but can at least do them. */
+ return dr_unaligned_supported;
}
- /* Find all data references in the loop (which correspond to vdefs/vuses)
- and analyze their evolution in the loop.
+ /* Unsupported. */
+ return dr_unaligned_unsupported;
+}
- FORNOW: Handle only simple, array references, which
- alignment can be forced, and aligned pointer-references. */
- ok = vect_analyze_data_refs (loop_vinfo);
- if (!ok)
- {
- if (vect_debug_details (loop))
- fprintf (dump_file, "bad data references.");
- destroy_loop_vec_info (loop_vinfo);
- return NULL;
- }
+/* Function vect_is_simple_use.
- /* Data-flow analysis to detect stmts that do not need to be vectorized. */
+ Input:
+ LOOP - the loop that is being vectorized.
+ OPERAND - operand of a stmt in LOOP.
+ DEF - the defining stmt in case OPERAND is an SSA_NAME.
- ok = vect_mark_stmts_to_be_vectorized (loop_vinfo);
- if (!ok)
- {
- if (vect_debug_details (loop))
- fprintf (dump_file, "unexpected pattern.");
- if (vect_debug_details (loop))
- fprintf (dump_file, "not vectorized: unexpected pattern.");
- destroy_loop_vec_info (loop_vinfo);
- return NULL;
- }
+ Returns whether a stmt with OPERAND can be vectorized.
+ Supportable operands are constants, loop invariants, and operands that are
+ defined by the current iteration of the loop. Unsupportable operands are
+ those that are defined by a previous iteration of the loop (as is the case
+ in reduction/induction computations). */
+
+bool
+vect_is_simple_use (tree operand, loop_vec_info loop_vinfo, tree *def)
+{
+ tree def_stmt;
+ basic_block bb;
+ struct loop *loop = LOOP_VINFO_LOOP (loop_vinfo);
+
+ if (def)
+ *def = NULL_TREE;
- /* Check that all cross-iteration scalar data-flow cycles are OK.
- Cross-iteration cycles caused by virtual phis are analyzed separately. */
+ if (TREE_CODE (operand) == INTEGER_CST || TREE_CODE (operand) == REAL_CST)
+ return true;
+
+ if (TREE_CODE (operand) != SSA_NAME)
+ return false;
- ok = vect_analyze_scalar_cycles (loop_vinfo);
- if (!ok)
+ def_stmt = SSA_NAME_DEF_STMT (operand);
+ if (def_stmt == NULL_TREE )
{
- if (vect_debug_details (loop))
- fprintf (dump_file, "bad scalar cycle.");
- destroy_loop_vec_info (loop_vinfo);
- return NULL;
+ if (vect_print_dump_info (REPORT_DETAILS, UNKNOWN_LOC))
+ fprintf (vect_dump, "no def_stmt.");
+ return false;
}
- /* Analyze data dependences between the data-refs in the loop.
- FORNOW: fail at the first data dependence that we encounter. */
-
- ok = vect_analyze_data_ref_dependences (loop_vinfo);
- if (!ok)
+ /* empty stmt is expected only in case of a function argument.
+ (Otherwise - we expect a phi_node or a modify_expr). */
+ if (IS_EMPTY_STMT (def_stmt))
{
- if (vect_debug_details (loop))
- fprintf (dump_file, "bad data dependence.");
- destroy_loop_vec_info (loop_vinfo);
- return NULL;
+ tree arg = TREE_OPERAND (def_stmt, 0);
+ if (TREE_CODE (arg) == INTEGER_CST || TREE_CODE (arg) == REAL_CST)
+ return true;
+ if (vect_print_dump_info (REPORT_DETAILS, UNKNOWN_LOC))
+ {
+ fprintf (vect_dump, "Unexpected empty stmt: ");
+ print_generic_expr (vect_dump, def_stmt, TDF_SLIM);
+ }
+ return false;
}
- /* Analyze the access patterns of the data-refs in the loop (consecutive,
- complex, etc.). FORNOW: Only handle consecutive access pattern. */
+ /* phi_node inside the loop indicates an induction/reduction pattern.
+ This is not supported yet. */
+ bb = bb_for_stmt (def_stmt);
+ if (TREE_CODE (def_stmt) == PHI_NODE && flow_bb_inside_loop_p (loop, bb))
+ {
+ if (vect_print_dump_info (REPORT_DETAILS, UNKNOWN_LOC))
+ fprintf (vect_dump, "reduction/induction - unsupported.");
+ return false; /* FORNOW: not supported yet. */
+ }
- ok = vect_analyze_data_ref_accesses (loop_vinfo);
- if (!ok)
+ /* Expecting a modify_expr or a phi_node. */
+ if (TREE_CODE (def_stmt) == MODIFY_EXPR
+ || TREE_CODE (def_stmt) == PHI_NODE)
{
- if (vect_debug_details (loop))
- fprintf (dump_file, "bad data access.");
- destroy_loop_vec_info (loop_vinfo);
- return NULL;
+ if (def)
+ *def = def_stmt;
+ return true;
}
- /* Analyze the alignment of the data-refs in the loop.
- FORNOW: Only aligned accesses are handled. */
+ return false;
+}
+
+
+/* Function vect_is_simple_iv_evolution.
+
+ FORNOW: A simple evolution of an induction variables in the loop is
+ considered a polynomial evolution with constant step. */
+
+bool
+vect_is_simple_iv_evolution (unsigned loop_nb, tree access_fn, tree * init,
+ tree * step)
+{
+ tree init_expr;
+ tree step_expr;
+
+ tree evolution_part = evolution_part_in_loop_num (access_fn, loop_nb);
+
+ /* When there is no evolution in this loop, the evolution function
+ is not "simple". */
+ if (evolution_part == NULL_TREE)
+ return false;
+
+ /* When the evolution is a polynomial of degree >= 2
+ the evolution function is not "simple". */
+ if (tree_is_chrec (evolution_part))
+ return false;
+
+ step_expr = evolution_part;
+ init_expr = unshare_expr (initial_condition_in_loop_num (access_fn,
+ loop_nb));
- ok = vect_analyze_data_refs_alignment (loop_vinfo);
- if (!ok)
+ if (vect_print_dump_info (REPORT_DETAILS, UNKNOWN_LOC))
{
- if (vect_debug_details (loop))
- fprintf (dump_file, "bad data alignment.");
- destroy_loop_vec_info (loop_vinfo);
- return NULL;
+ fprintf (vect_dump, "step: ");
+ print_generic_expr (vect_dump, step_expr, TDF_SLIM);
+ fprintf (vect_dump, ", init: ");
+ print_generic_expr (vect_dump, init_expr, TDF_SLIM);
}
- /* Scan all the operations in the loop and make sure they are
- vectorizable. */
+ *init = init_expr;
+ *step = step_expr;
- ok = vect_analyze_operations (loop_vinfo);
- if (!ok)
+ if (TREE_CODE (step_expr) != INTEGER_CST)
{
- if (vect_debug_details (loop))
- fprintf (dump_file, "bad operation or unsupported loop bound.");
- destroy_loop_vec_info (loop_vinfo);
- return NULL;
+ if (vect_print_dump_info (REPORT_DETAILS, UNKNOWN_LOC))
+ fprintf (vect_dump, "step unknown.");
+ return false;
}
- LOOP_VINFO_VECTORIZABLE_P (loop_vinfo) = 1;
-
- return loop_vinfo;
+ return true;
}
unsigned int i, loops_num;
unsigned int num_vectorized_loops = 0;
+ /* Fix the verbosity level if not defined explicitly by the user. */
+ vect_set_dump_settings ();
+
/* Does the target support SIMD? */
/* FORNOW: until more sophisticated machine modelling is in place. */
if (!UNITS_PER_SIMD_WORD)
{
- if (vect_debug_details (NULL))
- fprintf (dump_file, "vectorizer: target vector size is not defined.");
+ if (vect_print_dump_info (REPORT_DETAILS, UNKNOWN_LOC))
+ fprintf (vect_dump, "vectorizer: target vector size is not defined.");
return;
}
+#ifdef ENABLE_CHECKING
+ verify_loop_closed_ssa ();
+#endif
+
compute_immediate_uses (TDFA_USE_OPS, need_imm_uses_for);
/* ----------- Analyze loops. ----------- */
num_vectorized_loops++;
}
- if (vect_debug_stats (NULL) || vect_debug_details (NULL))
- fprintf (dump_file, "\nvectorized %u loops in function.\n",
+ if (vect_print_dump_info (REPORT_VECTORIZED_LOOPS, UNKNOWN_LOC))
+ fprintf (vect_dump, "vectorized %u loops in function.\n",
num_vectorized_loops);
/* ----------- Finalize. ----------- */
}
rewrite_into_ssa (false);
- if (bitmap_first_set_bit (vars_to_rename) >= 0)
- {
- /* The rewrite of ssa names may cause violation of loop closed ssa
- form invariants. TODO -- avoid these rewrites completely.
- Information in virtual phi nodes is sufficient for it. */
- rewrite_into_loop_closed_ssa ();
- }
+ rewrite_into_loop_closed_ssa (); /* FORNOW */
bitmap_clear (vars_to_rename);
}