#include "tree.h"
#include "target.h"
#include "basic-block.h"
-#include "diagnostic.h"
+#include "tree-pretty-print.h"
+#include "gimple-pretty-print.h"
#include "tree-flow.h"
#include "tree-dump.h"
#include "cfgloop.h"
#include "expr.h"
#include "recog.h"
#include "optabs.h"
-#include "toplev.h"
+#include "diagnostic-core.h"
#include "tree-vectorizer.h"
#include "langhooks.h"
/* Function exist_non_indexing_operands_for_use_p
- USE is one of the uses attached to STMT. Check if USE is
+ USE is one of the uses attached to STMT. Check if USE is
used in STMT for anything other than indexing an array. */
static bool
tree operand;
stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
- /* USE corresponds to some operand in STMT. If there is no data
+ /* USE corresponds to some operand in STMT. If there is no data
reference in STMT, then any operand that corresponds to USE
is not indexing an array. */
if (!STMT_VINFO_DATA_REF (stmt_info))
Inputs:
- a USE in STMT in a loop represented by LOOP_VINFO
- LIVE_P, RELEVANT - enum values to be set in the STMT_VINFO of the stmt
- that defined USE. This is done by calling mark_relevant and passing it
+ that defined USE. This is done by calling mark_relevant and passing it
the WORKLIST (to add DEF_STMT to the WORKLIST in case it is relevant).
Outputs:
relevant = vect_used_by_reduction
This is because we distinguish between two kinds of relevant stmts -
those that are used by a reduction computation, and those that are
- (also) used by a regular computation. This allows us later on to
+ (also) used by a regular computation. This allows us later on to
identify stmts that are used solely by a reduction, and therefore the
order of the results that they produce does not have to be kept. */
}
+/* Get cost by calling cost target builtin. */
+
+static inline
+int vect_get_stmt_cost (enum vect_cost_for_stmt type_of_cost)
+{
+ tree dummy_type = NULL;
+ int dummy = 0;
+
+ return targetm.vectorize.builtin_vectorization_cost (type_of_cost,
+ dummy_type, dummy);
+}
+
+
+/* Get cost for STMT. */
+
int
cost_for_stmt (gimple stmt)
{
switch (STMT_VINFO_TYPE (stmt_info))
{
case load_vec_info_type:
- return TARG_SCALAR_LOAD_COST;
+ return vect_get_stmt_cost (scalar_load);
case store_vec_info_type:
- return TARG_SCALAR_STORE_COST;
+ return vect_get_stmt_cost (scalar_store);
case op_vec_info_type:
case condition_vec_info_type:
case assignment_vec_info_type:
case type_demotion_vec_info_type:
case type_conversion_vec_info_type:
case call_vec_info_type:
- return TARG_SCALAR_STMT_COST;
+ return vect_get_stmt_cost (scalar_stmt);
case undef_vec_info_type:
default:
gcc_unreachable ();
if (PURE_SLP_STMT (stmt_info))
return;
- inside_cost = ncopies * TARG_VEC_STMT_COST;
+ inside_cost = ncopies * vect_get_stmt_cost (vector_stmt);
/* FORNOW: Assuming maximum 2 args per stmts. */
for (i = 0; i < 2; i++)
{
if (dt[i] == vect_constant_def || dt[i] == vect_external_def)
- outside_cost += TARG_SCALAR_TO_VEC_COST;
+ outside_cost += vect_get_stmt_cost (vector_stmt);
}
if (vect_print_dump_info (REPORT_COST))
enum vect_def_type dt, slp_tree slp_node)
{
int group_size;
- int inside_cost = 0, outside_cost = 0;
+ unsigned int inside_cost = 0, outside_cost = 0;
+ struct data_reference *first_dr;
+ gimple first_stmt;
/* The SLP costs were already calculated during SLP tree build. */
if (PURE_SLP_STMT (stmt_info))
return;
if (dt == vect_constant_def || dt == vect_external_def)
- outside_cost = TARG_SCALAR_TO_VEC_COST;
+ outside_cost = vect_get_stmt_cost (scalar_to_vec);
/* Strided access? */
- if (DR_GROUP_FIRST_DR (stmt_info) && !slp_node)
- group_size = vect_cost_strided_group_size (stmt_info);
+ if (DR_GROUP_FIRST_DR (stmt_info))
+ {
+ if (slp_node)
+ {
+ first_stmt = VEC_index (gimple, SLP_TREE_SCALAR_STMTS (slp_node), 0);
+ group_size = 1;
+ }
+ else
+ {
+ first_stmt = DR_GROUP_FIRST_DR (stmt_info);
+ group_size = vect_cost_strided_group_size (stmt_info);
+ }
+
+ first_dr = STMT_VINFO_DATA_REF (vinfo_for_stmt (first_stmt));
+ }
/* Not a strided access. */
else
- group_size = 1;
+ {
+ group_size = 1;
+ first_dr = STMT_VINFO_DATA_REF (stmt_info);
+ }
/* Is this an access in a group of stores, which provide strided access?
If so, add in the cost of the permutes. */
{
/* Uses a high and low interleave operation for each needed permute. */
inside_cost = ncopies * exact_log2(group_size) * group_size
- * TARG_VEC_STMT_COST;
+ * vect_get_stmt_cost (vector_stmt);
if (vect_print_dump_info (REPORT_COST))
fprintf (vect_dump, "vect_model_store_cost: strided group_size = %d .",
}
/* Costs of the stores. */
- inside_cost += ncopies * TARG_VEC_STORE_COST;
+ vect_get_store_cost (first_dr, ncopies, &inside_cost);
if (vect_print_dump_info (REPORT_COST))
fprintf (vect_dump, "vect_model_store_cost: inside_cost = %d, "
}
+/* Calculate cost of DR's memory access. */
+void
+vect_get_store_cost (struct data_reference *dr, int ncopies,
+ unsigned int *inside_cost)
+{
+ int alignment_support_scheme = vect_supportable_dr_alignment (dr, false);
+
+ switch (alignment_support_scheme)
+ {
+ case dr_aligned:
+ {
+ *inside_cost += ncopies * vect_get_stmt_cost (vector_store);
+
+ if (vect_print_dump_info (REPORT_COST))
+ fprintf (vect_dump, "vect_model_store_cost: aligned.");
+
+ break;
+ }
+
+ case dr_unaligned_supported:
+ {
+ gimple stmt = DR_STMT (dr);
+ stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
+ tree vectype = STMT_VINFO_VECTYPE (stmt_info);
+
+ /* Here, we assign an additional cost for the unaligned store. */
+ *inside_cost += ncopies
+ * targetm.vectorize.builtin_vectorization_cost (unaligned_store,
+ vectype, DR_MISALIGNMENT (dr));
+
+ if (vect_print_dump_info (REPORT_COST))
+ fprintf (vect_dump, "vect_model_store_cost: unaligned supported by "
+ "hardware.");
+
+ break;
+ }
+
+ default:
+ gcc_unreachable ();
+ }
+}
+
+
/* Function vect_model_load_cost
Models cost for loads. In the case of strided accesses, the last access
{
int group_size;
- int alignment_support_cheme;
gimple first_stmt;
struct data_reference *dr = STMT_VINFO_DATA_REF (stmt_info), *first_dr;
- int inside_cost = 0, outside_cost = 0;
+ unsigned int inside_cost = 0, outside_cost = 0;
/* The SLP costs were already calculated during SLP tree build. */
if (PURE_SLP_STMT (stmt_info))
first_dr = dr;
}
- alignment_support_cheme = vect_supportable_dr_alignment (first_dr);
-
/* Is this an access in a group of loads providing strided access?
If so, add in the cost of the permutes. */
if (group_size > 1)
{
/* Uses an even and odd extract operations for each needed permute. */
inside_cost = ncopies * exact_log2(group_size) * group_size
- * TARG_VEC_STMT_COST;
+ * vect_get_stmt_cost (vector_stmt);
if (vect_print_dump_info (REPORT_COST))
fprintf (vect_dump, "vect_model_load_cost: strided group_size = %d .",
group_size);
-
}
/* The loads themselves. */
- switch (alignment_support_cheme)
+ vect_get_load_cost (first_dr, ncopies,
+ ((!DR_GROUP_FIRST_DR (stmt_info)) || group_size > 1 || slp_node),
+ &inside_cost, &outside_cost);
+
+ if (vect_print_dump_info (REPORT_COST))
+ fprintf (vect_dump, "vect_model_load_cost: inside_cost = %d, "
+ "outside_cost = %d .", inside_cost, outside_cost);
+
+ /* Set the costs either in STMT_INFO or SLP_NODE (if exists). */
+ stmt_vinfo_set_inside_of_loop_cost (stmt_info, slp_node, inside_cost);
+ stmt_vinfo_set_outside_of_loop_cost (stmt_info, slp_node, outside_cost);
+}
+
+
+/* Calculate cost of DR's memory access. */
+void
+vect_get_load_cost (struct data_reference *dr, int ncopies,
+ bool add_realign_cost, unsigned int *inside_cost,
+ unsigned int *outside_cost)
+{
+ int alignment_support_scheme = vect_supportable_dr_alignment (dr, false);
+
+ switch (alignment_support_scheme)
{
case dr_aligned:
{
- inside_cost += ncopies * TARG_VEC_LOAD_COST;
+ *inside_cost += ncopies * vect_get_stmt_cost (vector_load);
if (vect_print_dump_info (REPORT_COST))
fprintf (vect_dump, "vect_model_load_cost: aligned.");
}
case dr_unaligned_supported:
{
- /* Here, we assign an additional cost for the unaligned load. */
- inside_cost += ncopies * TARG_VEC_UNALIGNED_LOAD_COST;
+ gimple stmt = DR_STMT (dr);
+ stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
+ tree vectype = STMT_VINFO_VECTYPE (stmt_info);
+ /* Here, we assign an additional cost for the unaligned load. */
+ *inside_cost += ncopies
+ * targetm.vectorize.builtin_vectorization_cost (unaligned_load,
+ vectype, DR_MISALIGNMENT (dr));
if (vect_print_dump_info (REPORT_COST))
fprintf (vect_dump, "vect_model_load_cost: unaligned supported by "
"hardware.");
}
case dr_explicit_realign:
{
- inside_cost += ncopies * (2*TARG_VEC_LOAD_COST + TARG_VEC_STMT_COST);
+ *inside_cost += ncopies * (2 * vect_get_stmt_cost (vector_load)
+ + vect_get_stmt_cost (vector_stmt));
/* FIXME: If the misalignment remains fixed across the iterations of
the containing loop, the following cost should be added to the
outside costs. */
if (targetm.vectorize.builtin_mask_for_load)
- inside_cost += TARG_VEC_STMT_COST;
+ *inside_cost += vect_get_stmt_cost (vector_stmt);
break;
}
"pipelined.");
/* Unaligned software pipeline has a load of an address, an initial
- load, and possibly a mask operation to "prime" the loop. However,
+ load, and possibly a mask operation to "prime" the loop. However,
if this is an access in a group of loads, which provide strided
access, then the above cost should only be considered for one
- access in the group. Inside the loop, there is a load op
+ access in the group. Inside the loop, there is a load op
and a realignment op. */
- if ((!DR_GROUP_FIRST_DR (stmt_info)) || group_size > 1 || slp_node)
+ if (add_realign_cost)
{
- outside_cost = 2*TARG_VEC_STMT_COST;
+ *outside_cost = 2 * vect_get_stmt_cost (vector_stmt);
if (targetm.vectorize.builtin_mask_for_load)
- outside_cost += TARG_VEC_STMT_COST;
+ *outside_cost += vect_get_stmt_cost (vector_stmt);
}
- inside_cost += ncopies * (TARG_VEC_LOAD_COST + TARG_VEC_STMT_COST);
-
+ *inside_cost += ncopies * (vect_get_stmt_cost (vector_load)
+ + vect_get_stmt_cost (vector_stmt));
break;
}
default:
gcc_unreachable ();
}
-
- if (vect_print_dump_info (REPORT_COST))
- fprintf (vect_dump, "vect_model_load_cost: inside_cost = %d, "
- "outside_cost = %d .", inside_cost, outside_cost);
-
- /* Set the costs either in STMT_INFO or SLP_NODE (if exists). */
- stmt_vinfo_set_inside_of_loop_cost (stmt_info, slp_node, inside_cost);
- stmt_vinfo_set_outside_of_loop_cost (stmt_info, slp_node, outside_cost);
}
/* Function vect_init_vector.
Insert a new stmt (INIT_STMT) that initializes a new vector variable with
- the vector elements of VECTOR_VAR. Place the initialization at BSI if it
- is not NULL. Otherwise, place the initialization at the loop preheader.
+ the vector elements of VECTOR_VAR. Place the initialization at BSI if it
+ is not NULL. Otherwise, place the initialization at the loop preheader.
Return the DEF of INIT_STMT.
It will be used in the vectorization of STMT. */
/* Function vect_get_vec_def_for_operand.
- OP is an operand in STMT. This function returns a (vector) def that will be
+ OP is an operand in STMT. This function returns a (vector) def that will be
used in the vectorized stmt for STMT.
In the case that OP is an SSA_NAME which is defined in the loop, then
gimple def_stmt;
stmt_vec_info def_stmt_info = NULL;
stmt_vec_info stmt_vinfo = vinfo_for_stmt (stmt);
- tree vectype = STMT_VINFO_VECTYPE (stmt_vinfo);
- unsigned int nunits = TYPE_VECTOR_SUBPARTS (vectype);
+ unsigned int nunits;
loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_vinfo);
tree vec_inv;
tree vec_cst;
{
vector_type = get_vectype_for_scalar_type (TREE_TYPE (op));
gcc_assert (vector_type);
+ nunits = TYPE_VECTOR_SUBPARTS (vector_type);
if (scalar_def)
*scalar_def = op;
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "Create vector_cst. nunits = %d", nunits);
- for (i = nunits - 1; i >= 0; --i)
- {
- t = tree_cons (NULL_TREE, op, t);
- }
- vec_cst = build_vector (vector_type, t);
+ vec_cst = build_vector_from_val (vector_type, op);
return vect_init_vector (stmt, vec_cst, vector_type, NULL);
}
/* Get the def from the vectorized stmt. */
def_stmt_info = vinfo_for_stmt (def_stmt);
vec_stmt = STMT_VINFO_VEC_STMT (def_stmt_info);
- gcc_assert (vec_stmt && gimple_code (vec_stmt) == GIMPLE_PHI);
- vec_oprnd = PHI_RESULT (vec_stmt);
+ if (gimple_code (vec_stmt) == GIMPLE_PHI)
+ vec_oprnd = PHI_RESULT (vec_stmt);
+ else
+ vec_oprnd = gimple_get_lhs (vec_stmt);
return vec_oprnd;
}
/* Function vect_get_vec_def_for_stmt_copy
- Return a vector-def for an operand. This function is used when the
+ Return a vector-def for an operand. This function is used when the
vectorized stmt to be created (by the caller to this function) is a "copy"
created in case the vectorized result cannot fit in one vector, and several
- copies of the vector-stmt are required. In this case the vector-def is
+ copies of the vector-stmt are required. In this case the vector-def is
retrieved from the vector stmt recorded in the STMT_VINFO_RELATED_STMT field
of the stmt that defines VEC_OPRND.
DT is the type of the vector def VEC_OPRND.
Context:
In case the vectorization factor (VF) is bigger than the number
of elements that can fit in a vectype (nunits), we have to generate
- more than one vector stmt to vectorize the scalar stmt. This situation
+ more than one vector stmt to vectorize the scalar stmt. This situation
arises when there are multiple data-types operated upon in the loop; the
smallest data-type determines the VF, and as a result, when vectorizing
stmts operating on wider types we need to create 'VF/nunits' "copies" of the
The vectorization of S2:
To create the first vector-stmt out of the 4 copies - VSnew.0 -
the function 'vect_get_vec_def_for_operand' is called to
- get the relevant vector-def for each operand of S2. For operand x it
+ get the relevant vector-def for each operand of S2. For operand x it
returns the vector-def 'vx.0'.
To create the remaining copies of the vector-stmt (VSnew.j), this
/* Get vectorized definitions for the operands to create a copy of an original
- stmt. See vect_get_vec_def_for_stmt_copy() for details. */
+ stmt. See vect_get_vec_def_for_stmt_copy () for details. */
static void
vect_get_vec_defs_for_stmt_copy (enum vect_def_type *dt,
}
-/* Get vectorized definitions for OP0 and OP1, or SLP_NODE if it is not NULL. */
+/* Get vectorized definitions for OP0 and OP1, or SLP_NODE if it is not
+ NULL. */
static void
vect_get_vec_defs (tree op0, tree op1, gimple stmt,
slp_tree slp_node)
{
if (slp_node)
- vect_get_slp_defs (slp_node, vec_oprnds0, vec_oprnds1, -1);
+ vect_get_slp_defs (op0, op1, slp_node, vec_oprnds0, vec_oprnds1, -1);
else
{
tree vec_oprnd;
loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info);
tree fndecl, new_temp, def, rhs_type;
gimple def_stmt;
- enum vect_def_type dt[2] = {vect_unknown_def_type, vect_unknown_def_type};
+ enum vect_def_type dt[3]
+ = {vect_unknown_def_type, vect_unknown_def_type, vect_unknown_def_type};
gimple new_stmt = NULL;
int ncopies, j;
VEC(tree, heap) *vargs = NULL;
if (TREE_CODE (gimple_call_lhs (stmt)) != SSA_NAME)
return false;
+ if (stmt_can_throw_internal (stmt))
+ return false;
+
vectype_out = STMT_VINFO_VECTYPE (stmt_info);
/* Process function arguments. */
vectype_in = NULL_TREE;
nargs = gimple_call_num_args (stmt);
- /* Bail out if the function has more than two arguments, we
- do not have interesting builtin functions to vectorize with
- more than two arguments. No arguments is also not good. */
- if (nargs == 0 || nargs > 2)
+ /* Bail out if the function has more than three arguments, we do not have
+ interesting builtin functions to vectorize with more than two arguments
+ except for fma. No arguments is also not good. */
+ if (nargs == 0 || nargs > 3)
return false;
for (i = 0; i < nargs; i++)
}
else
{
- vec_oprnd1 = gimple_call_arg (new_stmt, 2*i);
+ vec_oprnd1 = gimple_call_arg (new_stmt, 2*i + 1);
vec_oprnd0
= vect_get_vec_def_for_stmt_copy (dt[i], vec_oprnd1);
vec_oprnd1
type = TREE_TYPE (scalar_dest);
new_stmt = gimple_build_assign (gimple_call_lhs (stmt),
- fold_convert (type, integer_zero_node));
+ build_zero_cst (type));
set_vinfo_for_stmt (new_stmt, stmt_info);
+ /* For pattern statements make the related statement to point to
+ NEW_STMT in order to be able to retrieve the original statement
+ information later. */
+ if (is_pattern_stmt_p (stmt_info))
+ {
+ gimple related = STMT_VINFO_RELATED_STMT (stmt_info);
+ STMT_VINFO_RELATED_STMT (vinfo_for_stmt (related)) = new_stmt;
+ }
set_vinfo_for_stmt (stmt, NULL);
STMT_VINFO_STMT (stmt_info) = new_stmt;
gsi_replace (gsi, new_stmt, false);
Create a vector stmt whose code, type, number of arguments, and result
variable are CODE, OP_TYPE, and VEC_DEST, and its arguments are
- VEC_OPRND0 and VEC_OPRND1. The new vector stmt is to be inserted at BSI.
+ VEC_OPRND0 and VEC_OPRND1. The new vector stmt is to be inserted at BSI.
In the case that CODE is a CALL_EXPR, this means that a call to DECL
needs to be created (DECL is a function-decl of a target-builtin).
STMT is the original scalar stmt that we are vectorizing. */
else
ncopies = LOOP_VINFO_VECT_FACTOR (loop_vinfo) / nunits_in;
- /* FORNOW: SLP with multiple types is not supported. The SLP analysis verifies
- this, so we can safely override NCOPIES with 1 here. */
+ /* Multiple types in SLP are handled by creating the appropriate number of
+ vectorized stmts for each SLP node. Hence, NCOPIES is always 1 in
+ case of SLP. */
if (slp_node)
ncopies = 1;
builtin_decl =
targetm.vectorize.builtin_conversion (code,
vectype_out, vectype_in);
- for (i = 0; VEC_iterate (tree, vec_oprnds0, i, vop0); i++)
+ FOR_EACH_VEC_ELT (tree, vec_oprnds0, i, vop0)
{
/* Arguments are ready. create the new vector stmt. */
new_stmt = gimple_build_call (builtin_decl, 1, vop0);
vec_oprnd1 = vect_get_vec_def_for_stmt_copy (dt[0], vec_oprnd0);
}
- /* Arguments are ready. Create the new vector stmt. */
+ /* Arguments are ready. Create the new vector stmt. */
new_stmt = gimple_build_assign_with_ops (code1, vec_dest, vec_oprnd0,
vec_oprnd1);
new_temp = make_ssa_name (vec_dest, new_stmt);
return true;
}
+
+
/* Function vectorizable_assignment.
Check if STMT performs an assignment (copy) that can be vectorized.
tree def;
gimple def_stmt;
enum vect_def_type dt[2] = {vect_unknown_def_type, vect_unknown_def_type};
- int nunits = TYPE_VECTOR_SUBPARTS (vectype);
+ unsigned int nunits = TYPE_VECTOR_SUBPARTS (vectype);
int ncopies;
int i, j;
VEC(tree,heap) *vec_oprnds = NULL;
bb_vec_info bb_vinfo = STMT_VINFO_BB_VINFO (stmt_info);
gimple new_stmt = NULL;
stmt_vec_info prev_stmt_info = NULL;
+ enum tree_code code;
+ tree vectype_in;
/* Multiple types in SLP are handled by creating the appropriate number of
vectorized stmts for each SLP node. Hence, NCOPIES is always 1 in
if (TREE_CODE (scalar_dest) != SSA_NAME)
return false;
+ code = gimple_assign_rhs_code (stmt);
if (gimple_assign_single_p (stmt)
- || gimple_assign_rhs_code (stmt) == PAREN_EXPR)
+ || code == PAREN_EXPR
+ || CONVERT_EXPR_CODE_P (code))
op = gimple_assign_rhs1 (stmt);
else
return false;
- if (!vect_is_simple_use (op, loop_vinfo, bb_vinfo, &def_stmt, &def, &dt[0]))
+ if (!vect_is_simple_use_1 (op, loop_vinfo, bb_vinfo,
+ &def_stmt, &def, &dt[0], &vectype_in))
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "use not simple.");
return false;
}
+ /* We can handle NOP_EXPR conversions that do not change the number
+ of elements or the vector size. */
+ if (CONVERT_EXPR_CODE_P (code)
+ && (!vectype_in
+ || TYPE_VECTOR_SUBPARTS (vectype_in) != nunits
+ || (GET_MODE_SIZE (TYPE_MODE (vectype))
+ != GET_MODE_SIZE (TYPE_MODE (vectype_in)))))
+ return false;
+
if (!vec_stmt) /* transformation not required. */
{
STMT_VINFO_TYPE (stmt_info) = assignment_vec_info_type;
vect_get_vec_defs_for_stmt_copy (dt, &vec_oprnds, NULL);
/* Arguments are ready. create the new vector stmt. */
- for (i = 0; VEC_iterate (tree, vec_oprnds, i, vop); i++)
+ FOR_EACH_VEC_ELT (tree, vec_oprnds, i, vop)
{
+ if (CONVERT_EXPR_CODE_P (code))
+ vop = build1 (VIEW_CONVERT_EXPR, vectype, vop);
new_stmt = gimple_build_assign (vec_dest, vop);
new_temp = make_ssa_name (vec_dest, new_stmt);
gimple_assign_set_lhs (new_stmt, new_temp);
return true;
}
-/* Function vectorizable_operation.
- Check if STMT performs a binary or unary operation that can be vectorized.
+/* Function vectorizable_shift.
+
+ Check if STMT performs a shift operation that can be vectorized.
If VEC_STMT is also passed, vectorize the STMT: create a vectorized
stmt to replace it, put it in VEC_STMT, and insert it at BSI.
Return FALSE if not a vectorizable STMT, TRUE otherwise. */
static bool
-vectorizable_operation (gimple stmt, gimple_stmt_iterator *gsi,
- gimple *vec_stmt, slp_tree slp_node)
+vectorizable_shift (gimple stmt, gimple_stmt_iterator *gsi,
+ gimple *vec_stmt, slp_tree slp_node)
{
tree vec_dest;
tree scalar_dest;
enum tree_code code;
enum machine_mode vec_mode;
tree new_temp;
- int op_type;
optab optab;
int icode;
enum machine_mode optab_op2_mode;
tree vectype_out;
int ncopies;
int j, i;
- VEC(tree,heap) *vec_oprnds0 = NULL, *vec_oprnds1 = NULL;
+ VEC (tree, heap) *vec_oprnds0 = NULL, *vec_oprnds1 = NULL;
tree vop0, vop1;
unsigned int k;
- bool scalar_shift_arg = false;
+ bool scalar_shift_arg = true;
+ bb_vec_info bb_vinfo = STMT_VINFO_BB_VINFO (stmt_info);
+ int vf;
+
+ if (!STMT_VINFO_RELEVANT_P (stmt_info) && !bb_vinfo)
+ return false;
+
+ if (STMT_VINFO_DEF_TYPE (stmt_info) != vect_internal_def)
+ return false;
+
+ /* Is STMT a vectorizable binary/unary operation? */
+ if (!is_gimple_assign (stmt))
+ return false;
+
+ if (TREE_CODE (gimple_assign_lhs (stmt)) != SSA_NAME)
+ return false;
+
+ code = gimple_assign_rhs_code (stmt);
+
+ if (!(code == LSHIFT_EXPR || code == RSHIFT_EXPR || code == LROTATE_EXPR
+ || code == RROTATE_EXPR))
+ return false;
+
+ scalar_dest = gimple_assign_lhs (stmt);
+ vectype_out = STMT_VINFO_VECTYPE (stmt_info);
+
+ op0 = gimple_assign_rhs1 (stmt);
+ if (!vect_is_simple_use_1 (op0, loop_vinfo, bb_vinfo,
+ &def_stmt, &def, &dt[0], &vectype))
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "use not simple.");
+ return false;
+ }
+ /* If op0 is an external or constant def use a vector type with
+ the same size as the output vector type. */
+ if (!vectype)
+ vectype = get_same_sized_vectype (TREE_TYPE (op0), vectype_out);
+ if (vec_stmt)
+ gcc_assert (vectype);
+ if (!vectype)
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ {
+ fprintf (vect_dump, "no vectype for scalar type ");
+ print_generic_expr (vect_dump, TREE_TYPE (op0), TDF_SLIM);
+ }
+
+ return false;
+ }
+
+ nunits_out = TYPE_VECTOR_SUBPARTS (vectype_out);
+ nunits_in = TYPE_VECTOR_SUBPARTS (vectype);
+ if (nunits_out != nunits_in)
+ return false;
+
+ op1 = gimple_assign_rhs2 (stmt);
+ if (!vect_is_simple_use (op1, loop_vinfo, bb_vinfo, &def_stmt, &def, &dt[1]))
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "use not simple.");
+ return false;
+ }
+
+ if (loop_vinfo)
+ vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo);
+ else
+ vf = 1;
+
+ /* Multiple types in SLP are handled by creating the appropriate number of
+ vectorized stmts for each SLP node. Hence, NCOPIES is always 1 in
+ case of SLP. */
+ if (slp_node)
+ ncopies = 1;
+ else
+ ncopies = LOOP_VINFO_VECT_FACTOR (loop_vinfo) / nunits_in;
+
+ gcc_assert (ncopies >= 1);
+
+ /* Determine whether the shift amount is a vector, or scalar. If the
+ shift/rotate amount is a vector, use the vector/vector shift optabs. */
+
+ if (dt[1] == vect_internal_def && !slp_node)
+ scalar_shift_arg = false;
+ else if (dt[1] == vect_constant_def
+ || dt[1] == vect_external_def
+ || dt[1] == vect_internal_def)
+ {
+ /* In SLP, need to check whether the shift count is the same,
+ in loops if it is a constant or invariant, it is always
+ a scalar shift. */
+ if (slp_node)
+ {
+ VEC (gimple, heap) *stmts = SLP_TREE_SCALAR_STMTS (slp_node);
+ gimple slpstmt;
+
+ FOR_EACH_VEC_ELT (gimple, stmts, k, slpstmt)
+ if (!operand_equal_p (gimple_assign_rhs2 (slpstmt), op1, 0))
+ scalar_shift_arg = false;
+ }
+ }
+ else
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "operand mode requires invariant argument.");
+ return false;
+ }
+
+ /* Vector shifted by vector. */
+ if (!scalar_shift_arg)
+ {
+ optab = optab_for_tree_code (code, vectype, optab_vector);
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "vector/vector shift/rotate found.");
+ }
+ /* See if the machine has a vector shifted by scalar insn and if not
+ then see if it has a vector shifted by vector insn. */
+ else
+ {
+ optab = optab_for_tree_code (code, vectype, optab_scalar);
+ if (optab
+ && optab_handler (optab, TYPE_MODE (vectype)) != CODE_FOR_nothing)
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "vector/scalar shift/rotate found.");
+ }
+ else
+ {
+ optab = optab_for_tree_code (code, vectype, optab_vector);
+ if (optab
+ && (optab_handler (optab, TYPE_MODE (vectype))
+ != CODE_FOR_nothing))
+ {
+ scalar_shift_arg = false;
+
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "vector/vector shift/rotate found.");
+
+ /* Unlike the other binary operators, shifts/rotates have
+ the rhs being int, instead of the same type as the lhs,
+ so make sure the scalar is the right type if we are
+ dealing with vectors of short/char. */
+ if (dt[1] == vect_constant_def)
+ op1 = fold_convert (TREE_TYPE (vectype), op1);
+ }
+ }
+ }
+
+ /* Supportable by target? */
+ if (!optab)
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "no optab.");
+ return false;
+ }
+ vec_mode = TYPE_MODE (vectype);
+ icode = (int) optab_handler (optab, vec_mode);
+ if (icode == CODE_FOR_nothing)
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "op not supported by target.");
+ /* Check only during analysis. */
+ if (GET_MODE_SIZE (vec_mode) != UNITS_PER_WORD
+ || (vf < vect_min_worthwhile_factor (code)
+ && !vec_stmt))
+ return false;
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "proceeding using word mode.");
+ }
+
+ /* Worthwhile without SIMD support? Check only during analysis. */
+ if (!VECTOR_MODE_P (TYPE_MODE (vectype))
+ && vf < vect_min_worthwhile_factor (code)
+ && !vec_stmt)
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "not worthwhile without SIMD support.");
+ return false;
+ }
+
+ if (!vec_stmt) /* transformation not required. */
+ {
+ STMT_VINFO_TYPE (stmt_info) = shift_vec_info_type;
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "=== vectorizable_shift ===");
+ vect_model_simple_cost (stmt_info, ncopies, dt, NULL);
+ return true;
+ }
+
+ /** Transform. **/
+
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "transform binary/unary operation.");
+
+ /* Handle def. */
+ vec_dest = vect_create_destination_var (scalar_dest, vectype);
+
+ /* Allocate VECs for vector operands. In case of SLP, vector operands are
+ created in the previous stages of the recursion, so no allocation is
+ needed, except for the case of shift with scalar shift argument. In that
+ case we store the scalar operand in VEC_OPRNDS1 for every vector stmt to
+ be created to vectorize the SLP group, i.e., SLP_NODE->VEC_STMTS_SIZE.
+ In case of loop-based vectorization we allocate VECs of size 1. We
+ allocate VEC_OPRNDS1 only in case of binary operation. */
+ if (!slp_node)
+ {
+ vec_oprnds0 = VEC_alloc (tree, heap, 1);
+ vec_oprnds1 = VEC_alloc (tree, heap, 1);
+ }
+ else if (scalar_shift_arg)
+ vec_oprnds1 = VEC_alloc (tree, heap, slp_node->vec_stmts_size);
+
+ prev_stmt_info = NULL;
+ for (j = 0; j < ncopies; j++)
+ {
+ /* Handle uses. */
+ if (j == 0)
+ {
+ if (scalar_shift_arg)
+ {
+ /* Vector shl and shr insn patterns can be defined with scalar
+ operand 2 (shift operand). In this case, use constant or loop
+ invariant op1 directly, without extending it to vector mode
+ first. */
+ optab_op2_mode = insn_data[icode].operand[2].mode;
+ if (!VECTOR_MODE_P (optab_op2_mode))
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "operand 1 using scalar mode.");
+ vec_oprnd1 = op1;
+ VEC_quick_push (tree, vec_oprnds1, vec_oprnd1);
+ if (slp_node)
+ {
+ /* Store vec_oprnd1 for every vector stmt to be created
+ for SLP_NODE. We check during the analysis that all
+ the shift arguments are the same.
+ TODO: Allow different constants for different vector
+ stmts generated for an SLP instance. */
+ for (k = 0; k < slp_node->vec_stmts_size - 1; k++)
+ VEC_quick_push (tree, vec_oprnds1, vec_oprnd1);
+ }
+ }
+ }
+
+ /* vec_oprnd1 is available if operand 1 should be of a scalar-type
+ (a special case for certain kind of vector shifts); otherwise,
+ operand 1 should be of a vector type (the usual case). */
+ if (vec_oprnd1)
+ vect_get_vec_defs (op0, NULL_TREE, stmt, &vec_oprnds0, NULL,
+ slp_node);
+ else
+ vect_get_vec_defs (op0, op1, stmt, &vec_oprnds0, &vec_oprnds1,
+ slp_node);
+ }
+ else
+ vect_get_vec_defs_for_stmt_copy (dt, &vec_oprnds0, &vec_oprnds1);
+
+ /* Arguments are ready. Create the new vector stmt. */
+ FOR_EACH_VEC_ELT (tree, vec_oprnds0, i, vop0)
+ {
+ vop1 = VEC_index (tree, vec_oprnds1, i);
+ new_stmt = gimple_build_assign_with_ops (code, vec_dest, vop0, vop1);
+ new_temp = make_ssa_name (vec_dest, new_stmt);
+ gimple_assign_set_lhs (new_stmt, new_temp);
+ vect_finish_stmt_generation (stmt, new_stmt, gsi);
+ if (slp_node)
+ VEC_quick_push (gimple, SLP_TREE_VEC_STMTS (slp_node), new_stmt);
+ }
+
+ if (slp_node)
+ continue;
+
+ if (j == 0)
+ STMT_VINFO_VEC_STMT (stmt_info) = *vec_stmt = new_stmt;
+ else
+ STMT_VINFO_RELATED_STMT (prev_stmt_info) = new_stmt;
+ prev_stmt_info = vinfo_for_stmt (new_stmt);
+ }
+
+ VEC_free (tree, heap, vec_oprnds0);
+ VEC_free (tree, heap, vec_oprnds1);
+
+ return true;
+}
+
+
+/* Function vectorizable_operation.
+
+ Check if STMT performs a binary, unary or ternary operation that can
+ be vectorized.
+ If VEC_STMT is also passed, vectorize the STMT: create a vectorized
+ stmt to replace it, put it in VEC_STMT, and insert it at BSI.
+ Return FALSE if not a vectorizable STMT, TRUE otherwise. */
+
+static bool
+vectorizable_operation (gimple stmt, gimple_stmt_iterator *gsi,
+ gimple *vec_stmt, slp_tree slp_node)
+{
+ tree vec_dest;
+ tree scalar_dest;
+ tree op0, op1 = NULL_TREE, op2 = NULL_TREE;
+ stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
+ tree vectype;
+ loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info);
+ enum tree_code code;
+ enum machine_mode vec_mode;
+ tree new_temp;
+ int op_type;
+ optab optab;
+ int icode;
+ tree def;
+ gimple def_stmt;
+ enum vect_def_type dt[3]
+ = {vect_unknown_def_type, vect_unknown_def_type, vect_unknown_def_type};
+ gimple new_stmt = NULL;
+ stmt_vec_info prev_stmt_info;
+ int nunits_in;
+ int nunits_out;
+ tree vectype_out;
+ int ncopies;
+ int j, i;
+ VEC(tree,heap) *vec_oprnds0 = NULL, *vec_oprnds1 = NULL, *vec_oprnds2 = NULL;
+ tree vop0, vop1, vop2;
bb_vec_info bb_vinfo = STMT_VINFO_BB_VINFO (stmt_info);
int vf;
/* Support only unary or binary operations. */
op_type = TREE_CODE_LENGTH (code);
- if (op_type != unary_op && op_type != binary_op)
+ if (op_type != unary_op && op_type != binary_op && op_type != ternary_op)
{
if (vect_print_dump_info (REPORT_DETAILS))
- fprintf (vect_dump, "num. args = %d (not unary/binary op).", op_type);
+ fprintf (vect_dump, "num. args = %d (not unary/binary/ternary op).",
+ op_type);
return false;
}
if (nunits_out != nunits_in)
return false;
- if (op_type == binary_op)
+ if (op_type == binary_op || op_type == ternary_op)
{
op1 = gimple_assign_rhs2 (stmt);
if (!vect_is_simple_use (op1, loop_vinfo, bb_vinfo, &def_stmt, &def,
return false;
}
}
+ if (op_type == ternary_op)
+ {
+ op2 = gimple_assign_rhs3 (stmt);
+ if (!vect_is_simple_use (op2, loop_vinfo, bb_vinfo, &def_stmt, &def,
+ &dt[2]))
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "use not simple.");
+ return false;
+ }
+ }
if (loop_vinfo)
vf = LOOP_VINFO_VECT_FACTOR (loop_vinfo);
vf = 1;
/* Multiple types in SLP are handled by creating the appropriate number of
- vectorized stmts for each SLP node. Hence, NCOPIES is always 1 in
+ vectorized stmts for each SLP node. Hence, NCOPIES is always 1 in
case of SLP. */
if (slp_node)
ncopies = 1;
gcc_assert (ncopies >= 1);
- /* If this is a shift/rotate, determine whether the shift amount is a vector,
- or scalar. If the shift/rotate amount is a vector, use the vector/vector
- shift optabs. */
+ /* Shifts are handled in vectorizable_shift (). */
if (code == LSHIFT_EXPR || code == RSHIFT_EXPR || code == LROTATE_EXPR
|| code == RROTATE_EXPR)
- {
- /* vector shifted by vector */
- if (dt[1] == vect_internal_def)
- {
- optab = optab_for_tree_code (code, vectype, optab_vector);
- if (vect_print_dump_info (REPORT_DETAILS))
- fprintf (vect_dump, "vector/vector shift/rotate found.");
- }
+ return false;
- /* See if the machine has a vector shifted by scalar insn and if not
- then see if it has a vector shifted by vector insn */
- else if (dt[1] == vect_constant_def || dt[1] == vect_external_def)
- {
- optab = optab_for_tree_code (code, vectype, optab_scalar);
- if (optab
- && (optab_handler (optab, TYPE_MODE (vectype))->insn_code
- != CODE_FOR_nothing))
- {
- scalar_shift_arg = true;
- if (vect_print_dump_info (REPORT_DETAILS))
- fprintf (vect_dump, "vector/scalar shift/rotate found.");
- }
- else
- {
- optab = optab_for_tree_code (code, vectype, optab_vector);
- if (optab
- && (optab_handler (optab, TYPE_MODE (vectype))->insn_code
- != CODE_FOR_nothing))
- {
- if (vect_print_dump_info (REPORT_DETAILS))
- fprintf (vect_dump, "vector/vector shift/rotate found.");
-
- /* Unlike the other binary operators, shifts/rotates have
- the rhs being int, instead of the same type as the lhs,
- so make sure the scalar is the right type if we are
- dealing with vectors of short/char. */
- if (dt[1] == vect_constant_def)
- op1 = fold_convert (TREE_TYPE (vectype), op1);
- }
- }
- }
-
- else
- {
- if (vect_print_dump_info (REPORT_DETAILS))
- fprintf (vect_dump, "operand mode requires invariant argument.");
- return false;
- }
- }
- else
- optab = optab_for_tree_code (code, vectype, optab_default);
+ optab = optab_for_tree_code (code, vectype, optab_default);
/* Supportable by target? */
if (!optab)
return false;
}
vec_mode = TYPE_MODE (vectype);
- icode = (int) optab_handler (optab, vec_mode)->insn_code;
+ icode = (int) optab_handler (optab, vec_mode);
if (icode == CODE_FOR_nothing)
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "proceeding using word mode.");
}
- /* Worthwhile without SIMD support? Check only during analysis. */
+ /* Worthwhile without SIMD support? Check only during analysis. */
if (!VECTOR_MODE_P (TYPE_MODE (vectype))
&& vf < vect_min_worthwhile_factor (code)
&& !vec_stmt)
/* Handle def. */
vec_dest = vect_create_destination_var (scalar_dest, vectype);
- /* Allocate VECs for vector operands. In case of SLP, vector operands are
+ /* Allocate VECs for vector operands. In case of SLP, vector operands are
created in the previous stages of the recursion, so no allocation is
- needed, except for the case of shift with scalar shift argument. In that
+ needed, except for the case of shift with scalar shift argument. In that
case we store the scalar operand in VEC_OPRNDS1 for every vector stmt to
be created to vectorize the SLP group, i.e., SLP_NODE->VEC_STMTS_SIZE.
- In case of loop-based vectorization we allocate VECs of size 1. We
+ In case of loop-based vectorization we allocate VECs of size 1. We
allocate VEC_OPRNDS1 only in case of binary operation. */
if (!slp_node)
{
vec_oprnds0 = VEC_alloc (tree, heap, 1);
- if (op_type == binary_op)
+ if (op_type == binary_op || op_type == ternary_op)
vec_oprnds1 = VEC_alloc (tree, heap, 1);
+ if (op_type == ternary_op)
+ vec_oprnds2 = VEC_alloc (tree, heap, 1);
}
- else if (scalar_shift_arg)
- vec_oprnds1 = VEC_alloc (tree, heap, slp_node->vec_stmts_size);
/* In case the vectorization factor (VF) is bigger than the number
of elements that we can fit in a vectype (nunits), we have to generate
more than one vector stmt - i.e - we need to "unroll" the
- vector stmt by a factor VF/nunits. In doing so, we record a pointer
+ vector stmt by a factor VF/nunits. In doing so, we record a pointer
from one copy of the vector stmt to the next, in the field
- STMT_VINFO_RELATED_STMT. This is necessary in order to allow following
+ STMT_VINFO_RELATED_STMT. This is necessary in order to allow following
stages to find the correct vector defs to be used when vectorizing
- stmts that use the defs of the current stmt. The example below illustrates
- the vectorization process when VF=16 and nunits=4 (i.e - we need to create
- 4 vectorized stmts):
+ stmts that use the defs of the current stmt. The example below
+ illustrates the vectorization process when VF=16 and nunits=4 (i.e.,
+ we need to create 4 vectorized stmts):
before vectorization:
RELATED_STMT VEC_STMT
step2: vectorize stmt S2 (done here):
To vectorize stmt S2 we first need to find the relevant vector
- def for the first operand 'x'. This is, as usual, obtained from
+ def for the first operand 'x'. This is, as usual, obtained from
the vector stmt recorded in the STMT_VINFO_VEC_STMT of the stmt
- that defines 'x' (S1). This way we find the stmt VS1_0, and the
- relevant vector def 'vx0'. Having found 'vx0' we can generate
+ that defines 'x' (S1). This way we find the stmt VS1_0, and the
+ relevant vector def 'vx0'. Having found 'vx0' we can generate
the vector stmt VS2_0, and as usual, record it in the
STMT_VINFO_VEC_STMT of stmt S2.
When creating the second copy (VS2_1), we obtain the relevant vector
def from the vector stmt recorded in the STMT_VINFO_RELATED_STMT of
- stmt VS1_0. This way we find the stmt VS1_1 and the relevant
- vector def 'vx1'. Using 'vx1' we create stmt VS2_1 and record a
+ stmt VS1_0. This way we find the stmt VS1_1 and the relevant
+ vector def 'vx1'. Using 'vx1' we create stmt VS2_1 and record a
pointer to it in the STMT_VINFO_RELATED_STMT of the vector stmt VS2_0.
- Similarly when creating stmts VS2_2 and VS2_3. This is the resulting
+ Similarly when creating stmts VS2_2 and VS2_3. This is the resulting
chain of stmts and pointers:
RELATED_STMT VEC_STMT
VS1_0: vx0 = memref0 VS1_1 -
/* Handle uses. */
if (j == 0)
{
- if (op_type == binary_op && scalar_shift_arg)
- {
- /* Vector shl and shr insn patterns can be defined with scalar
- operand 2 (shift operand). In this case, use constant or loop
- invariant op1 directly, without extending it to vector mode
- first. */
- optab_op2_mode = insn_data[icode].operand[2].mode;
- if (!VECTOR_MODE_P (optab_op2_mode))
- {
- if (vect_print_dump_info (REPORT_DETAILS))
- fprintf (vect_dump, "operand 1 using scalar mode.");
- vec_oprnd1 = op1;
- VEC_quick_push (tree, vec_oprnds1, vec_oprnd1);
- if (slp_node)
- {
- /* Store vec_oprnd1 for every vector stmt to be created
- for SLP_NODE. We check during the analysis that all the
- shift arguments are the same.
- TODO: Allow different constants for different vector
- stmts generated for an SLP instance. */
- for (k = 0; k < slp_node->vec_stmts_size - 1; k++)
- VEC_quick_push (tree, vec_oprnds1, vec_oprnd1);
- }
- }
- }
-
- /* vec_oprnd1 is available if operand 1 should be of a scalar-type
- (a special case for certain kind of vector shifts); otherwise,
- operand 1 should be of a vector type (the usual case). */
- if (op_type == binary_op && !vec_oprnd1)
+ if (op_type == binary_op || op_type == ternary_op)
vect_get_vec_defs (op0, op1, stmt, &vec_oprnds0, &vec_oprnds1,
slp_node);
else
vect_get_vec_defs (op0, NULL_TREE, stmt, &vec_oprnds0, NULL,
slp_node);
+ if (op_type == ternary_op)
+ {
+ vec_oprnds2 = VEC_alloc (tree, heap, 1);
+ VEC_quick_push (tree, vec_oprnds2,
+ vect_get_vec_def_for_operand (op2, stmt, NULL));
+ }
}
else
- vect_get_vec_defs_for_stmt_copy (dt, &vec_oprnds0, &vec_oprnds1);
+ {
+ vect_get_vec_defs_for_stmt_copy (dt, &vec_oprnds0, &vec_oprnds1);
+ if (op_type == ternary_op)
+ {
+ tree vec_oprnd = VEC_pop (tree, vec_oprnds2);
+ VEC_quick_push (tree, vec_oprnds2,
+ vect_get_vec_def_for_stmt_copy (dt[2],
+ vec_oprnd));
+ }
+ }
- /* Arguments are ready. Create the new vector stmt. */
- for (i = 0; VEC_iterate (tree, vec_oprnds0, i, vop0); i++)
+ /* Arguments are ready. Create the new vector stmt. */
+ FOR_EACH_VEC_ELT (tree, vec_oprnds0, i, vop0)
{
- vop1 = ((op_type == binary_op)
- ? VEC_index (tree, vec_oprnds1, i) : NULL);
- new_stmt = gimple_build_assign_with_ops (code, vec_dest, vop0, vop1);
+ vop1 = ((op_type == binary_op || op_type == ternary_op)
+ ? VEC_index (tree, vec_oprnds1, i) : NULL_TREE);
+ vop2 = ((op_type == ternary_op)
+ ? VEC_index (tree, vec_oprnds2, i) : NULL_TREE);
+ new_stmt = gimple_build_assign_with_ops3 (code, vec_dest,
+ vop0, vop1, vop2);
new_temp = make_ssa_name (vec_dest, new_stmt);
gimple_assign_set_lhs (new_stmt, new_temp);
vect_finish_stmt_generation (stmt, new_stmt, gsi);
VEC_free (tree, heap, vec_oprnds0);
if (vec_oprnds1)
VEC_free (tree, heap, vec_oprnds1);
+ if (vec_oprnds2)
+ VEC_free (tree, heap, vec_oprnds2);
return true;
}
-/* Get vectorized definitions for loop-based vectorization. For the first
+/* Get vectorized definitions for loop-based vectorization. For the first
operand we call vect_get_vec_def_for_operand() (with OPRND containing
scalar operand), and for the rest we get a copy with
vect_get_vec_def_for_stmt_copy() using the previous vector definition
return false;
/* Multiple types in SLP are handled by creating the appropriate number of
- vectorized stmts for each SLP node. Hence, NCOPIES is always 1 in
+ vectorized stmts for each SLP node. Hence, NCOPIES is always 1 in
case of SLP. */
if (slp_node)
ncopies = 1;
{
/* Handle uses. */
if (slp_node)
- vect_get_slp_defs (slp_node, &vec_oprnds0, NULL, -1);
+ vect_get_slp_defs (op0, NULL_TREE, slp_node, &vec_oprnds0, NULL, -1);
else
{
VEC_free (tree, heap, vec_oprnds0);
vect_pow2 (multi_step_cvt) - 1);
}
- /* Arguments are ready. Create the new vector stmts. */
+ /* Arguments are ready. Create the new vector stmts. */
tmp_vec_dsts = VEC_copy (tree, heap, vec_dsts);
vect_create_vectorized_demotion_stmts (&vec_oprnds0,
multi_step_cvt, stmt, tmp_vec_dsts,
/* Create vectorized promotion statements for vector operands from VEC_OPRNDS0
- and VEC_OPRNDS1 (for binary operations). For multi-step conversions store
+ and VEC_OPRNDS1 (for binary operations). For multi-step conversions store
the resulting vectors and call the function recursively. */
static void
vec_dest = VEC_pop (tree, vec_dsts);
vec_tmp = VEC_alloc (tree, heap, VEC_length (tree, *vec_oprnds0) * 2);
- for (i = 0; VEC_iterate (tree, *vec_oprnds0, i, vop0); i++)
+ FOR_EACH_VEC_ELT (tree, *vec_oprnds0, i, vop0)
{
if (op_type == binary_op)
vop1 = VEC_index (tree, *vec_oprnds1, i);
if (multi_step_cvt)
{
/* For multi-step promotion operation we first generate we call the
- function recurcively for every stage. We start from the input type,
+ function recurcively for every stage. We start from the input type,
create promotion operations to the intermediate types, and then
create promotions to the output type. */
*vec_oprnds0 = VEC_copy (tree, heap, vec_tmp);
- VEC_free (tree, heap, vec_tmp);
vect_create_vectorized_promotion_stmts (vec_oprnds0, vec_oprnds1,
multi_step_cvt - 1, stmt,
vec_dsts, gsi, slp_node, code1,
code2, decl2, decl2, op_type,
prev_stmt_info);
}
+
+ VEC_free (tree, heap, vec_tmp);
}
return false;
/* Multiple types in SLP are handled by creating the appropriate number of
- vectorized stmts for each SLP node. Hence, NCOPIES is always 1 in
+ vectorized stmts for each SLP node. Hence, NCOPIES is always 1 in
case of SLP. */
if (slp_node)
ncopies = 1;
if (j == 0)
{
if (slp_node)
- vect_get_slp_defs (slp_node, &vec_oprnds0, &vec_oprnds1, -1);
+ vect_get_slp_defs (op0, op1, slp_node, &vec_oprnds0,
+ &vec_oprnds1, -1);
else
{
vec_oprnd0 = vect_get_vec_def_for_operand (op0, stmt, NULL);
}
}
- /* Arguments are ready. Create the new vector stmts. */
+ /* Arguments are ready. Create the new vector stmts. */
tmp_vec_dsts = VEC_copy (tree, heap, vec_dsts);
vect_create_vectorized_promotion_stmts (&vec_oprnds0, &vec_oprnds1,
multi_step_cvt, stmt,
&& TREE_CODE (scalar_dest) != INDIRECT_REF
&& TREE_CODE (scalar_dest) != COMPONENT_REF
&& TREE_CODE (scalar_dest) != IMAGPART_EXPR
- && TREE_CODE (scalar_dest) != REALPART_EXPR)
+ && TREE_CODE (scalar_dest) != REALPART_EXPR
+ && TREE_CODE (scalar_dest) != MEM_REF)
return false;
gcc_assert (gimple_assign_single_p (stmt));
vec_mode = TYPE_MODE (vectype);
/* FORNOW. In some cases can vectorize even if data-type not supported
(e.g. - array initialization with 0). */
- if (optab_handler (mov_optab, (int)vec_mode)->insn_code == CODE_FOR_nothing)
+ if (optab_handler (mov_optab, vec_mode) == CODE_FOR_nothing)
return false;
if (!STMT_VINFO_DATA_REF (stmt_info))
return false;
+ if (tree_int_cst_compare (DR_STEP (dr), size_zero_node) < 0)
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "negative step for store.");
+ return false;
+ }
+
if (STMT_VINFO_STRIDED_ACCESS (stmt_info))
{
strided_store = true;
dr_chain = VEC_alloc (tree, heap, group_size);
oprnds = VEC_alloc (tree, heap, group_size);
- alignment_support_scheme = vect_supportable_dr_alignment (first_dr);
+ alignment_support_scheme = vect_supportable_dr_alignment (first_dr, false);
gcc_assert (alignment_support_scheme);
/* In case the vectorization factor (VF) is bigger than the number
the documentation of vect_permute_store_chain()).
In case of both multiple types and interleaving, above vector stores and
- permutation stmts are created for every copy. The result vector stmts are
+ permutation stmts are created for every copy. The result vector stmts are
put in STMT_VINFO_VEC_STMT for the first copy and in the corresponding
STMT_VINFO_RELATED_STMT for the next copies.
*/
if (slp)
{
/* Get vectorized arguments for SLP_NODE. */
- vect_get_slp_defs (slp_node, &vec_oprnds, NULL, -1);
+ vect_get_slp_defs (NULL_TREE, NULL_TREE, slp_node, &vec_oprnds,
+ NULL, -1);
vec_oprnd = VEC_index (tree, vec_oprnds, 0);
}
next_stmt = first_stmt;
for (i = 0; i < vec_num; i++)
{
+ struct ptr_info_def *pi;
+
if (i > 0)
/* Bump the vector pointer. */
dataref_ptr = bump_vector_ptr (dataref_ptr, ptr_incr, gsi, stmt,
vect_permute_store_chain(). */
vec_oprnd = VEC_index (tree, result_chain, i);
+ data_ref = build2 (MEM_REF, TREE_TYPE (vec_oprnd), dataref_ptr,
+ build_int_cst (reference_alias_ptr_type
+ (DR_REF (first_dr)), 0));
+ pi = get_ptr_info (dataref_ptr);
+ pi->align = TYPE_ALIGN_UNIT (vectype);
if (aligned_access_p (first_dr))
- data_ref = build_fold_indirect_ref (dataref_ptr);
- else
- {
- int mis = DR_MISALIGNMENT (first_dr);
- tree tmis = (mis == -1 ? size_zero_node : size_int (mis));
- tmis = size_binop (MULT_EXPR, tmis, size_int (BITS_PER_UNIT));
- data_ref = build2 (MISALIGNED_INDIRECT_REF, vectype, dataref_ptr, tmis);
- }
-
- /* If accesses through a pointer to vectype do not alias the original
- memory reference we have a problem. This should never happen. */
- gcc_assert (alias_sets_conflict_p (get_alias_set (data_ref),
- get_alias_set (gimple_assign_lhs (stmt))));
+ pi->misalign = 0;
+ else if (DR_MISALIGNMENT (first_dr) == -1)
+ {
+ TREE_TYPE (data_ref)
+ = build_aligned_type (TREE_TYPE (data_ref),
+ TYPE_ALIGN (TREE_TYPE (vectype)));
+ pi->align = TYPE_ALIGN_UNIT (TREE_TYPE (vectype));
+ pi->misalign = 0;
+ }
+ else
+ {
+ TREE_TYPE (data_ref)
+ = build_aligned_type (TREE_TYPE (data_ref),
+ TYPE_ALIGN (TREE_TYPE (vectype)));
+ pi->misalign = DR_MISALIGNMENT (first_dr);
+ }
- /* Arguments are ready. Create the new vector stmt. */
+ /* Arguments are ready. Create the new vector stmt. */
new_stmt = gimple_build_assign (data_ref, vec_oprnd);
vect_finish_stmt_generation (stmt, new_stmt, gsi);
mark_symbols_for_renaming (new_stmt);
VEC_free (tree, heap, oprnds);
if (result_chain)
VEC_free (tree, heap, result_chain);
+ if (vec_oprnds)
+ VEC_free (tree, heap, vec_oprnds);
return true;
}
+/* Given a vector type VECTYPE returns a builtin DECL to be used
+ for vector permutation and stores a mask into *MASK that implements
+ reversal of the vector elements. If that is impossible to do
+ returns NULL (and *MASK is unchanged). */
+
+static tree
+perm_mask_for_reverse (tree vectype, tree *mask)
+{
+ tree builtin_decl;
+ tree mask_element_type, mask_type;
+ tree mask_vec = NULL;
+ int i;
+ int nunits;
+ if (!targetm.vectorize.builtin_vec_perm)
+ return NULL;
+
+ builtin_decl = targetm.vectorize.builtin_vec_perm (vectype,
+ &mask_element_type);
+ if (!builtin_decl || !mask_element_type)
+ return NULL;
+
+ mask_type = get_vectype_for_scalar_type (mask_element_type);
+ nunits = TYPE_VECTOR_SUBPARTS (vectype);
+ if (!mask_type
+ || TYPE_VECTOR_SUBPARTS (vectype) != TYPE_VECTOR_SUBPARTS (mask_type))
+ return NULL;
+
+ for (i = 0; i < nunits; i++)
+ mask_vec = tree_cons (NULL, build_int_cst (mask_element_type, i), mask_vec);
+ mask_vec = build_vector (mask_type, mask_vec);
+
+ if (!targetm.vectorize.builtin_vec_perm_ok (vectype, mask_vec))
+ return NULL;
+ if (mask)
+ *mask = mask_vec;
+ return builtin_decl;
+}
+
+/* Given a vector variable X, that was generated for the scalar LHS of
+ STMT, generate instructions to reverse the vector elements of X,
+ insert them a *GSI and return the permuted vector variable. */
+
+static tree
+reverse_vec_elements (tree x, gimple stmt, gimple_stmt_iterator *gsi)
+{
+ tree vectype = TREE_TYPE (x);
+ tree mask_vec, builtin_decl;
+ tree perm_dest, data_ref;
+ gimple perm_stmt;
+
+ builtin_decl = perm_mask_for_reverse (vectype, &mask_vec);
+
+ perm_dest = vect_create_destination_var (gimple_assign_lhs (stmt), vectype);
+
+ /* Generate the permute statement. */
+ perm_stmt = gimple_build_call (builtin_decl, 3, x, x, mask_vec);
+ if (!useless_type_conversion_p (vectype,
+ TREE_TYPE (TREE_TYPE (builtin_decl))))
+ {
+ tree tem = create_tmp_reg (TREE_TYPE (TREE_TYPE (builtin_decl)), NULL);
+ tem = make_ssa_name (tem, perm_stmt);
+ gimple_call_set_lhs (perm_stmt, tem);
+ vect_finish_stmt_generation (stmt, perm_stmt, gsi);
+ perm_stmt = gimple_build_assign (NULL_TREE,
+ build1 (VIEW_CONVERT_EXPR,
+ vectype, tem));
+ }
+ data_ref = make_ssa_name (perm_dest, perm_stmt);
+ gimple_set_lhs (perm_stmt, data_ref);
+ vect_finish_stmt_generation (stmt, perm_stmt, gsi);
+
+ return data_ref;
+}
+
/* vectorizable_load.
Check if STMT reads a non scalar data-ref (array/pointer/structure) that
struct data_reference *dr = STMT_VINFO_DATA_REF (stmt_info), *first_dr;
tree vectype = STMT_VINFO_VECTYPE (stmt_info);
tree new_temp;
- int mode;
+ enum machine_mode mode;
gimple new_stmt = NULL;
tree dummy;
enum dr_alignment_support alignment_support_scheme;
gimple first_stmt;
tree scalar_type;
bool inv_p;
+ bool negative;
bool compute_in_loop = false;
struct loop *at_loop;
int vec_num;
vf = 1;
/* Multiple types in SLP are handled by creating the appropriate number of
- vectorized stmts for each SLP node. Hence, NCOPIES is always 1 in
+ vectorized stmts for each SLP node. Hence, NCOPIES is always 1 in
case of SLP. */
if (slp)
ncopies = 1;
&& code != INDIRECT_REF
&& code != COMPONENT_REF
&& code != IMAGPART_EXPR
- && code != REALPART_EXPR)
+ && code != REALPART_EXPR
+ && code != MEM_REF)
return false;
if (!STMT_VINFO_DATA_REF (stmt_info))
return false;
+ negative = tree_int_cst_compare (DR_STEP (dr), size_zero_node) < 0;
+ if (negative && ncopies > 1)
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "multiple types with negative step.");
+ return false;
+ }
+
scalar_type = TREE_TYPE (DR_REF (dr));
- mode = (int) TYPE_MODE (vectype);
+ mode = TYPE_MODE (vectype);
/* FORNOW. In some cases can vectorize even if data-type not supported
(e.g. - data copies). */
- if (optab_handler (mov_optab, mode)->insn_code == CODE_FOR_nothing)
+ if (optab_handler (mov_optab, mode) == CODE_FOR_nothing)
{
if (vect_print_dump_info (REPORT_DETAILS))
fprintf (vect_dump, "Aligned load, but unsupported type.");
return false;
}
+ if (negative)
+ {
+ gcc_assert (!strided_load);
+ alignment_support_scheme = vect_supportable_dr_alignment (dr, false);
+ if (alignment_support_scheme != dr_aligned
+ && alignment_support_scheme != dr_unaligned_supported)
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "negative step but alignment required.");
+ return false;
+ }
+ if (!perm_mask_for_reverse (vectype, NULL))
+ {
+ if (vect_print_dump_info (REPORT_DETAILS))
+ fprintf (vect_dump, "negative step and reversing not supported.");
+ return false;
+ }
+ }
+
if (!vec_stmt) /* transformation not required. */
{
STMT_VINFO_TYPE (stmt_info) = load_vec_info_type;
group_size = vec_num = 1;
}
- alignment_support_scheme = vect_supportable_dr_alignment (first_dr);
+ alignment_support_scheme = vect_supportable_dr_alignment (first_dr, false);
gcc_assert (alignment_support_scheme);
/* In case the vectorization factor (VF) is bigger than the number
of elements that we can fit in a vectype (nunits), we have to generate
more than one vector stmt - i.e - we need to "unroll" the
- vector stmt by a factor VF/nunits. In doing so, we record a pointer
+ vector stmt by a factor VF/nunits. In doing so, we record a pointer
from one copy of the vector stmt to the next, in the field
- STMT_VINFO_RELATED_STMT. This is necessary in order to allow following
+ STMT_VINFO_RELATED_STMT. This is necessary in order to allow following
stages to find the correct vector defs to be used when vectorizing
- stmts that use the defs of the current stmt. The example below illustrates
- the vectorization process when VF=16 and nunits=4 (i.e - we need to create
- 4 vectorized stmts):
+ stmts that use the defs of the current stmt. The example below
+ illustrates the vectorization process when VF=16 and nunits=4 (i.e., we
+ need to create 4 vectorized stmts):
before vectorization:
RELATED_STMT VEC_STMT
pointer to it in the STMT_VINFO_VEC_STMT of the scalar stmt S1.
Next, we create the vector stmt VS1_1, and record a pointer to
it in the STMT_VINFO_RELATED_STMT of the vector stmt VS1_0.
- Similarly, for VS1_2 and VS1_3. This is the resulting chain of
+ Similarly, for VS1_2 and VS1_3. This is the resulting chain of
stmts and pointers:
RELATED_STMT VEC_STMT
VS1_0: vx0 = memref0 VS1_1 -
STMT_VINFO_VEC_STMT is done in vect_transform_strided_load().
In case of both multiple types and interleaving, the vector loads and
- permutation stmts above are created for every copy. The result vector stmts
- are put in STMT_VINFO_VEC_STMT for the first copy and in the corresponding
- STMT_VINFO_RELATED_STMT for the next copies. */
+ permutation stmts above are created for every copy. The result vector
+ stmts are put in STMT_VINFO_VEC_STMT for the first copy and in the
+ corresponding STMT_VINFO_RELATED_STMT for the next copies. */
/* If the data reference is aligned (dr_aligned) or potentially unaligned
on a target that supports unaligned accesses (dr_unaligned_supported)
/* If the misalignment remains the same throughout the execution of the
loop, we can create the init_addr and permutation mask at the loop
- preheader. Otherwise, it needs to be created inside the loop.
+ preheader. Otherwise, it needs to be created inside the loop.
This can only occur when vectorizing memory accesses in the inner-loop
nested within an outer-loop that is being vectorized. */
else
at_loop = loop;
+ if (negative)
+ offset = size_int (-TYPE_VECTOR_SUBPARTS (vectype) + 1);
+
prev_stmt_info = NULL;
for (j = 0; j < ncopies; j++)
{
switch (alignment_support_scheme)
{
case dr_aligned:
- gcc_assert (aligned_access_p (first_dr));
- data_ref = build_fold_indirect_ref (dataref_ptr);
- break;
case dr_unaligned_supported:
{
- int mis = DR_MISALIGNMENT (first_dr);
- tree tmis = (mis == -1 ? size_zero_node : size_int (mis));
-
- tmis = size_binop (MULT_EXPR, tmis, size_int(BITS_PER_UNIT));
- data_ref =
- build2 (MISALIGNED_INDIRECT_REF, vectype, dataref_ptr, tmis);
+ struct ptr_info_def *pi;
+ data_ref
+ = build2 (MEM_REF, vectype, dataref_ptr,
+ build_int_cst (reference_alias_ptr_type
+ (DR_REF (first_dr)), 0));
+ pi = get_ptr_info (dataref_ptr);
+ pi->align = TYPE_ALIGN_UNIT (vectype);
+ if (alignment_support_scheme == dr_aligned)
+ {
+ gcc_assert (aligned_access_p (first_dr));
+ pi->misalign = 0;
+ }
+ else if (DR_MISALIGNMENT (first_dr) == -1)
+ {
+ TREE_TYPE (data_ref)
+ = build_aligned_type (TREE_TYPE (data_ref),
+ TYPE_ALIGN (TREE_TYPE (vectype)));
+ pi->align = TYPE_ALIGN_UNIT (TREE_TYPE (vectype));
+ pi->misalign = 0;
+ }
+ else
+ {
+ TREE_TYPE (data_ref)
+ = build_aligned_type (TREE_TYPE (data_ref),
+ TYPE_ALIGN (TREE_TYPE (vectype)));
+ pi->misalign = DR_MISALIGNMENT (first_dr);
+ }
break;
}
case dr_explicit_realign:
dr_explicit_realign,
dataref_ptr, NULL);
- data_ref = build1 (ALIGN_INDIRECT_REF, vectype, dataref_ptr);
+ new_stmt = gimple_build_assign_with_ops
+ (BIT_AND_EXPR, NULL_TREE, dataref_ptr,
+ build_int_cst
+ (TREE_TYPE (dataref_ptr),
+ -(HOST_WIDE_INT)TYPE_ALIGN_UNIT (vectype)));
+ ptr = make_ssa_name (SSA_NAME_VAR (dataref_ptr), new_stmt);
+ gimple_assign_set_lhs (new_stmt, ptr);
+ vect_finish_stmt_generation (stmt, new_stmt, gsi);
+ data_ref
+ = build2 (MEM_REF, vectype, ptr,
+ build_int_cst (reference_alias_ptr_type
+ (DR_REF (first_dr)), 0));
vec_dest = vect_create_destination_var (scalar_dest, vectype);
new_stmt = gimple_build_assign (vec_dest, data_ref);
new_temp = make_ssa_name (vec_dest, new_stmt);
bump = size_binop (MULT_EXPR, vs_minus_1,
TYPE_SIZE_UNIT (scalar_type));
ptr = bump_vector_ptr (dataref_ptr, NULL, gsi, stmt, bump);
- data_ref = build1 (ALIGN_INDIRECT_REF, vectype, ptr);
+ new_stmt = gimple_build_assign_with_ops
+ (BIT_AND_EXPR, NULL_TREE, ptr,
+ build_int_cst
+ (TREE_TYPE (ptr),
+ -(HOST_WIDE_INT)TYPE_ALIGN_UNIT (vectype)));
+ ptr = make_ssa_name (SSA_NAME_VAR (dataref_ptr), new_stmt);
+ gimple_assign_set_lhs (new_stmt, ptr);
+ vect_finish_stmt_generation (stmt, new_stmt, gsi);
+ data_ref
+ = build2 (MEM_REF, vectype, ptr,
+ build_int_cst (reference_alias_ptr_type
+ (DR_REF (first_dr)), 0));
break;
}
case dr_explicit_realign_optimized:
- data_ref = build1 (ALIGN_INDIRECT_REF, vectype, dataref_ptr);
+ new_stmt = gimple_build_assign_with_ops
+ (BIT_AND_EXPR, NULL_TREE, dataref_ptr,
+ build_int_cst
+ (TREE_TYPE (dataref_ptr),
+ -(HOST_WIDE_INT)TYPE_ALIGN_UNIT (vectype)));
+ new_temp = make_ssa_name (SSA_NAME_VAR (dataref_ptr), new_stmt);
+ gimple_assign_set_lhs (new_stmt, new_temp);
+ vect_finish_stmt_generation (stmt, new_stmt, gsi);
+ data_ref
+ = build2 (MEM_REF, vectype, new_temp,
+ build_int_cst (reference_alias_ptr_type
+ (DR_REF (first_dr)), 0));
break;
default:
gcc_unreachable ();
}
- /* If accesses through a pointer to vectype do not alias the original
- memory reference we have a problem. This should never happen. */
- gcc_assert (alias_sets_conflict_p (get_alias_set (data_ref),
- get_alias_set (gimple_assign_rhs1 (stmt))));
vec_dest = vect_create_destination_var (scalar_dest, vectype);
new_stmt = gimple_build_assign (vec_dest, data_ref);
new_temp = make_ssa_name (vec_dest, new_stmt);
vect_finish_stmt_generation (stmt, new_stmt, gsi);
mark_symbols_for_renaming (new_stmt);
- /* 3. Handle explicit realignment if necessary/supported. Create in
+ /* 3. Handle explicit realignment if necessary/supported. Create in
loop: vec_dest = realign_load (msq, lsq, realignment_token) */
if (alignment_support_scheme == dr_explicit_realign_optimized
|| alignment_support_scheme == dr_explicit_realign)
gcc_unreachable (); /* FORNOW. */
}
+ if (negative)
+ {
+ new_temp = reverse_vec_elements (new_temp, stmt, gsi);
+ new_stmt = SSA_NAME_DEF_STMT (new_temp);
+ }
+
/* Collect vector loads and later create their permutation in
vect_transform_strided_load (). */
if (strided_load || slp_perm)
tree cond_expr, then_clause, else_clause;
stmt_vec_info stmt_info = vinfo_for_stmt (stmt);
tree vectype = STMT_VINFO_VECTYPE (stmt_info);
- tree vec_cond_lhs, vec_cond_rhs, vec_then_clause, vec_else_clause;
+ tree vec_cond_lhs = NULL_TREE, vec_cond_rhs = NULL_TREE;
+ tree vec_then_clause = NULL_TREE, vec_else_clause = NULL_TREE;
tree vec_compare, vec_cond_expr;
tree new_temp;
loop_vec_info loop_vinfo = STMT_VINFO_LOOP_VINFO (stmt_info);
enum machine_mode vec_mode;
tree def;
- enum vect_def_type dt;
+ enum vect_def_type dt, dts[4];
int nunits = TYPE_VECTOR_SUBPARTS (vectype);
int ncopies = LOOP_VINFO_VECT_FACTOR (loop_vinfo) / nunits;
enum tree_code code;
+ stmt_vec_info prev_stmt_info = NULL;
+ int j;
/* FORNOW: unsupported in basic block SLP. */
gcc_assert (loop_vinfo);
gcc_assert (ncopies >= 1);
- if (ncopies > 1)
+ if (reduc_index && ncopies > 1)
return false; /* FORNOW */
if (!STMT_VINFO_RELEVANT_P (stmt_info))
vec_dest = vect_create_destination_var (scalar_dest, vectype);
/* Handle cond expr. */
- vec_cond_lhs =
- vect_get_vec_def_for_operand (TREE_OPERAND (cond_expr, 0), stmt, NULL);
- vec_cond_rhs =
- vect_get_vec_def_for_operand (TREE_OPERAND (cond_expr, 1), stmt, NULL);
- if (reduc_index == 1)
- vec_then_clause = reduc_def;
- else
- vec_then_clause = vect_get_vec_def_for_operand (then_clause, stmt, NULL);
- if (reduc_index == 2)
- vec_else_clause = reduc_def;
- else
- vec_else_clause = vect_get_vec_def_for_operand (else_clause, stmt, NULL);
+ for (j = 0; j < ncopies; j++)
+ {
+ gimple new_stmt;
+ if (j == 0)
+ {
+ gimple gtemp;
+ vec_cond_lhs =
+ vect_get_vec_def_for_operand (TREE_OPERAND (cond_expr, 0),
+ stmt, NULL);
+ vect_is_simple_use (TREE_OPERAND (cond_expr, 0), loop_vinfo,
+ NULL, >emp, &def, &dts[0]);
+ vec_cond_rhs =
+ vect_get_vec_def_for_operand (TREE_OPERAND (cond_expr, 1),
+ stmt, NULL);
+ vect_is_simple_use (TREE_OPERAND (cond_expr, 1), loop_vinfo,
+ NULL, >emp, &def, &dts[1]);
+ if (reduc_index == 1)
+ vec_then_clause = reduc_def;
+ else
+ {
+ vec_then_clause = vect_get_vec_def_for_operand (then_clause,
+ stmt, NULL);
+ vect_is_simple_use (then_clause, loop_vinfo,
+ NULL, >emp, &def, &dts[2]);
+ }
+ if (reduc_index == 2)
+ vec_else_clause = reduc_def;
+ else
+ {
+ vec_else_clause = vect_get_vec_def_for_operand (else_clause,
+ stmt, NULL);
+ vect_is_simple_use (else_clause, loop_vinfo,
+ NULL, >emp, &def, &dts[3]);
+ }
+ }
+ else
+ {
+ vec_cond_lhs = vect_get_vec_def_for_stmt_copy (dts[0], vec_cond_lhs);
+ vec_cond_rhs = vect_get_vec_def_for_stmt_copy (dts[1], vec_cond_rhs);
+ vec_then_clause = vect_get_vec_def_for_stmt_copy (dts[2],
+ vec_then_clause);
+ vec_else_clause = vect_get_vec_def_for_stmt_copy (dts[3],
+ vec_else_clause);
+ }
- /* Arguments are ready. Create the new vector stmt. */
- vec_compare = build2 (TREE_CODE (cond_expr), vectype,
- vec_cond_lhs, vec_cond_rhs);
- vec_cond_expr = build3 (VEC_COND_EXPR, vectype,
- vec_compare, vec_then_clause, vec_else_clause);
+ /* Arguments are ready. Create the new vector stmt. */
+ vec_compare = build2 (TREE_CODE (cond_expr), vectype,
+ vec_cond_lhs, vec_cond_rhs);
+ vec_cond_expr = build3 (VEC_COND_EXPR, vectype,
+ vec_compare, vec_then_clause, vec_else_clause);
+
+ new_stmt = gimple_build_assign (vec_dest, vec_cond_expr);
+ new_temp = make_ssa_name (vec_dest, new_stmt);
+ gimple_assign_set_lhs (new_stmt, new_temp);
+ vect_finish_stmt_generation (stmt, new_stmt, gsi);
+ if (j == 0)
+ STMT_VINFO_VEC_STMT (stmt_info) = *vec_stmt = new_stmt;
+ else
+ STMT_VINFO_RELATED_STMT (prev_stmt_info) = new_stmt;
- *vec_stmt = gimple_build_assign (vec_dest, vec_cond_expr);
- new_temp = make_ssa_name (vec_dest, *vec_stmt);
- gimple_assign_set_lhs (*vec_stmt, new_temp);
- vect_finish_stmt_generation (stmt, *vec_stmt, gsi);
+ prev_stmt_info = vinfo_for_stmt (new_stmt);
+ }
return true;
}
ok = (vectorizable_type_promotion (stmt, NULL, NULL, NULL)
|| vectorizable_type_demotion (stmt, NULL, NULL, NULL)
|| vectorizable_conversion (stmt, NULL, NULL, NULL)
+ || vectorizable_shift (stmt, NULL, NULL, NULL)
|| vectorizable_operation (stmt, NULL, NULL, NULL)
|| vectorizable_assignment (stmt, NULL, NULL, NULL)
|| vectorizable_load (stmt, NULL, NULL, NULL, NULL)
else
{
if (bb_vinfo)
- ok = (vectorizable_operation (stmt, NULL, NULL, node)
+ ok = (vectorizable_shift (stmt, NULL, NULL, node)
+ || vectorizable_operation (stmt, NULL, NULL, node)
|| vectorizable_assignment (stmt, NULL, NULL, node)
|| vectorizable_load (stmt, NULL, NULL, node, NULL)
|| vectorizable_store (stmt, NULL, NULL, node));
if (!PURE_SLP_STMT (stmt_info))
{
/* Groups of strided accesses whose size is not a power of 2 are not
- vectorizable yet using loop-vectorization. Therefore, if this stmt
+ vectorizable yet using loop-vectorization. Therefore, if this stmt
feeds non-SLP-able stmts (i.e., this stmt has to be both SLPed and
loop-based vectorized), the loop cannot be vectorized. */
if (STMT_VINFO_STRIDED_ACCESS (stmt_info)
gcc_assert (done);
break;
+ case shift_vec_info_type:
+ done = vectorizable_shift (stmt, gsi, &vec_stmt, slp_node);
+ gcc_assert (done);
+ break;
+
case op_vec_info_type:
done = vectorizable_operation (stmt, gsi, &vec_stmt, slp_node);
gcc_assert (done);
if (STMT_VINFO_STRIDED_ACCESS (stmt_info) && !slp_node)
{
/* In case of interleaving, the whole chain is vectorized when the
- last store in the chain is reached. Store stmts before the last
+ last store in the chain is reached. Store stmts before the last
one are skipped, and there vec_stmt_info shouldn't be freed
meanwhile. */
*strided_store = true;
case call_vec_info_type:
gcc_assert (!slp_node);
done = vectorizable_call (stmt, gsi, &vec_stmt);
+ stmt = gsi_stmt (*gsi);
break;
case reduc_vec_info_type:
the stmt_info of ORIG_STMT_IN_PATTERN. See more details in the
documentation of vect_pattern_recog. */
if (STMT_VINFO_IN_PATTERN_P (stmt_vinfo))
- {
- gcc_assert (STMT_VINFO_RELATED_STMT (stmt_vinfo) == stmt);
- STMT_VINFO_VEC_STMT (stmt_vinfo) = vec_stmt;
- }
+ STMT_VINFO_VEC_STMT (stmt_vinfo) = vec_stmt;
}
}
}
-/* Function get_vectype_for_scalar_type.
+/* Function get_vectype_for_scalar_type_and_size.
- Returns the vector type corresponding to SCALAR_TYPE as supported
+ Returns the vector type corresponding to SCALAR_TYPE and SIZE as supported
by the target. */
-tree
-get_vectype_for_scalar_type (tree scalar_type)
+static tree
+get_vectype_for_scalar_type_and_size (tree scalar_type, unsigned size)
{
enum machine_mode inner_mode = TYPE_MODE (scalar_type);
+ enum machine_mode simd_mode;
unsigned int nbytes = GET_MODE_SIZE (inner_mode);
int nunits;
tree vectype;
- if (nbytes == 0 || nbytes >= UNITS_PER_SIMD_WORD (inner_mode))
+ if (nbytes == 0)
return NULL_TREE;
/* We can't build a vector type of elements with alignment bigger than
&& GET_MODE_BITSIZE (inner_mode) != TYPE_PRECISION (scalar_type))
return NULL_TREE;
- /* FORNOW: Only a single vector size per mode (UNITS_PER_SIMD_WORD)
- is expected. */
- nunits = UNITS_PER_SIMD_WORD (inner_mode) / nbytes;
+ if (GET_MODE_CLASS (inner_mode) != MODE_INT
+ && GET_MODE_CLASS (inner_mode) != MODE_FLOAT)
+ return NULL_TREE;
+
+ /* We shouldn't end up building VECTOR_TYPEs of non-scalar components.
+ When the component mode passes the above test simply use a type
+ corresponding to that mode. The theory is that any use that
+ would cause problems with this will disable vectorization anyway. */
+ if (!SCALAR_FLOAT_TYPE_P (scalar_type)
+ && !INTEGRAL_TYPE_P (scalar_type)
+ && !POINTER_TYPE_P (scalar_type))
+ scalar_type = lang_hooks.types.type_for_mode (inner_mode, 1);
+
+ /* If no size was supplied use the mode the target prefers. Otherwise
+ lookup a vector mode of the specified size. */
+ if (size == 0)
+ simd_mode = targetm.vectorize.preferred_simd_mode (inner_mode);
+ else
+ simd_mode = mode_for_vector (inner_mode, size / nbytes);
+ nunits = GET_MODE_SIZE (simd_mode) / nbytes;
+ if (nunits <= 1)
+ return NULL_TREE;
vectype = build_vector_type (scalar_type, nunits);
if (vect_print_dump_info (REPORT_DETAILS))
return vectype;
}
+unsigned int current_vector_size;
+
+/* Function get_vectype_for_scalar_type.
+
+ Returns the vector type corresponding to SCALAR_TYPE as supported
+ by the target. */
+
+tree
+get_vectype_for_scalar_type (tree scalar_type)
+{
+ tree vectype;
+ vectype = get_vectype_for_scalar_type_and_size (scalar_type,
+ current_vector_size);
+ if (vectype
+ && current_vector_size == 0)
+ current_vector_size = GET_MODE_SIZE (TYPE_MODE (vectype));
+ return vectype;
+}
+
/* Function get_same_sized_vectype
Returns a vector type corresponding to SCALAR_TYPE of size
VECTOR_TYPE if supported by the target. */
tree
-get_same_sized_vectype (tree scalar_type, tree vector_type ATTRIBUTE_UNUSED)
+get_same_sized_vectype (tree scalar_type, tree vector_type)
{
- return get_vectype_for_scalar_type (scalar_type);
+ return get_vectype_for_scalar_type_and_size
+ (scalar_type, GET_MODE_SIZE (TYPE_MODE (vector_type)));
}
/* Function vect_is_simple_use.
Returns whether a stmt with OPERAND can be vectorized.
For loops, supportable operands are constants, loop invariants, and operands
- that are defined by the current iteration of the loop. Unsupportable
+ that are defined by the current iteration of the loop. Unsupportable
operands are those that are defined by a previous iteration of the loop (as
is the case in reduction/induction computations).
For basic blocks, supportable operands are constants and bb invariants.
- CODE1 and CODE2 are codes of vector operations to be used when
vectorizing the operation, if available.
- DECL1 and DECL2 are decls of target builtin functions to be used
- when vectorizing the operation, if available. In this case,
+ when vectorizing the operation, if available. In this case,
CODE1 and CODE2 are CALL_EXPR.
- MULTI_STEP_CVT determines the number of required intermediate steps in
case of multi-step conversion (like char->short->int - in that case
When vectorizing outer-loops, we execute the inner-loop sequentially
(each vectorized inner-loop iteration contributes to VF outer-loop
- iterations in parallel). We therefore don't allow to change the order
+ iterations in parallel). We therefore don't allow to change the order
of the computation in the inner-loop during outer-loop vectorization. */
if (STMT_VINFO_RELEVANT (stmt_info) == vect_used_by_reduction
return false;
vec_mode = TYPE_MODE (vectype);
- if ((icode1 = optab_handler (optab1, vec_mode)->insn_code) == CODE_FOR_nothing
- || (icode2 = optab_handler (optab2, vec_mode)->insn_code)
- == CODE_FOR_nothing)
+ if ((icode1 = optab_handler (optab1, vec_mode)) == CODE_FOR_nothing
+ || (icode2 = optab_handler (optab2, vec_mode)) == CODE_FOR_nothing)
return false;
/* Check if it's a multi-step conversion that can be done using intermediate
*code2 = c2;
/* We assume here that there will not be more than MAX_INTERM_CVT_STEPS
- intermediate steps in promotion sequence. We try MAX_INTERM_CVT_STEPS
- to get to NARROW_VECTYPE, and fail if we do not. */
+ intermediate steps in promotion sequence. We try
+ MAX_INTERM_CVT_STEPS to get to NARROW_VECTYPE, and fail if we do
+ not. */
*interm_types = VEC_alloc (tree, heap, MAX_INTERM_CVT_STEPS);
for (i = 0; i < 3; i++)
{
optab4 = optab_for_tree_code (c2, intermediate_type, optab_default);
if (!optab3 || !optab4
- || (icode1 = optab1->handlers[(int) prev_mode].insn_code)
- == CODE_FOR_nothing
+ || ((icode1 = optab_handler (optab1, prev_mode))
+ == CODE_FOR_nothing)
|| insn_data[icode1].operand[0].mode != intermediate_mode
- || (icode2 = optab2->handlers[(int) prev_mode].insn_code)
- == CODE_FOR_nothing
+ || ((icode2 = optab_handler (optab2, prev_mode))
+ == CODE_FOR_nothing)
|| insn_data[icode2].operand[0].mode != intermediate_mode
- || (icode1 = optab3->handlers[(int) intermediate_mode].insn_code)
- == CODE_FOR_nothing
- || (icode2 = optab4->handlers[(int) intermediate_mode].insn_code)
- == CODE_FOR_nothing)
+ || ((icode1 = optab_handler (optab3, intermediate_mode))
+ == CODE_FOR_nothing)
+ || ((icode2 = optab_handler (optab4, intermediate_mode))
+ == CODE_FOR_nothing))
return false;
VEC_quick_push (tree, *interm_types, intermediate_type);
and producing a result of type VECTYPE_OUT).
Narrowing operations we currently support are NOP (CONVERT) and
- FIX_TRUNC. This function checks if these operations are supported by
+ FIX_TRUNC. This function checks if these operations are supported by
the target platform directly via vector tree-codes.
Output:
return false;
vec_mode = TYPE_MODE (vectype);
- if ((icode1 = optab_handler (optab1, vec_mode)->insn_code)
- == CODE_FOR_nothing)
+ if ((icode1 = optab_handler (optab1, vec_mode)) == CODE_FOR_nothing)
return false;
/* Check if it's a multi-step conversion that can be done using intermediate
*code1 = c1;
prev_type = vectype;
/* We assume here that there will not be more than MAX_INTERM_CVT_STEPS
- intermediate steps in promotion sequence. We try MAX_INTERM_CVT_STEPS
- to get to NARROW_VECTYPE, and fail if we do not. */
+ intermediate steps in promotion sequence. We try
+ MAX_INTERM_CVT_STEPS to get to NARROW_VECTYPE, and fail if we do
+ not. */
*interm_types = VEC_alloc (tree, heap, MAX_INTERM_CVT_STEPS);
for (i = 0; i < 3; i++)
{
interm_optab = optab_for_tree_code (c1, intermediate_type,
optab_default);
if (!interm_optab
- || (icode1 = optab1->handlers[(int) prev_mode].insn_code)
- == CODE_FOR_nothing
+ || ((icode1 = optab_handler (optab1, prev_mode))
+ == CODE_FOR_nothing)
|| insn_data[icode1].operand[0].mode != intermediate_mode
- || (icode1
- = interm_optab->handlers[(int) intermediate_mode].insn_code)
- == CODE_FOR_nothing)
+ || ((icode1 = optab_handler (interm_optab, intermediate_mode))
+ == CODE_FOR_nothing))
return false;
VEC_quick_push (tree, *interm_types, intermediate_type);
OSDN Git Service
