OSDN Git Service

* regmove.c: Move all of pass_stack_adjustments from here...
[pf3gnuchains/gcc-fork.git] / gcc / regmove.c
index 06272e5..d874695 100644 (file)
@@ -623,12 +623,11 @@ optimize_reg_copy_2 (rtx insn, rtx dest, rtx src)
                if (reg_mentioned_p (dest, PATTERN (q)))
                  PATTERN (q) = replace_rtx (PATTERN (q), dest, src);
 
-
-             if (CALL_P (q))
-               {
-                 REG_N_CALLS_CROSSED (dregno)--;
-                 REG_N_CALLS_CROSSED (sregno)++;
-               }
+               if (CALL_P (q))
+                 {
+                   REG_N_CALLS_CROSSED (dregno)--;
+                   REG_N_CALLS_CROSSED (sregno)++;
+                 }
              }
 
          remove_note (p, find_reg_note (p, REG_DEAD, dest));
@@ -644,6 +643,7 @@ optimize_reg_copy_2 (rtx insn, rtx dest, rtx src)
        break;
     }
 }
+
 /* INSN is a ZERO_EXTEND or SIGN_EXTEND of SRC to DEST.
    Look if SRC dies there, and if it is only set once, by loading
    it from memory.  If so, try to incorporate the zero/sign extension
@@ -2083,408 +2083,13 @@ stable_and_no_regs_but_for_p (rtx x, rtx src, rtx dst)
     }
 }
 \f
-/* Track stack adjustments and stack memory references.  Attempt to
-   reduce the number of stack adjustments by back-propagating across
-   the memory references.
-
-   This is intended primarily for use with targets that do not define
-   ACCUMULATE_OUTGOING_ARGS.  It is of significantly more value to
-   targets that define PREFERRED_STACK_BOUNDARY more aligned than
-   STACK_BOUNDARY (e.g. x86), or if not all registers can be pushed
-   (e.g. x86 fp regs) which would ordinarily have to be implemented
-   as a sub/mov pair due to restrictions in calls.c.
-
-   Propagation stops when any of the insns that need adjusting are
-   (a) no longer valid because we've exceeded their range, (b) a
-   non-trivial push instruction, or (c) a call instruction.
-
-   Restriction B is based on the assumption that push instructions
-   are smaller or faster.  If a port really wants to remove all
-   pushes, it should have defined ACCUMULATE_OUTGOING_ARGS.  The
-   one exception that is made is for an add immediately followed
-   by a push.  */
-
-/* This structure records stack memory references between stack adjusting
-   instructions.  */
-
-struct csa_memlist
-{
-  HOST_WIDE_INT sp_offset;
-  rtx insn, *mem;
-  struct csa_memlist *next;
-};
-
-static int stack_memref_p (rtx);
-static rtx single_set_for_csa (rtx);
-static void free_csa_memlist (struct csa_memlist *);
-static struct csa_memlist *record_one_stack_memref (rtx, rtx *,
-                                                   struct csa_memlist *);
-static int try_apply_stack_adjustment (rtx, struct csa_memlist *,
-                                      HOST_WIDE_INT, HOST_WIDE_INT);
-static void combine_stack_adjustments_for_block (basic_block);
-static int record_stack_memrefs (rtx *, void *);
-
-
-/* Main entry point for stack adjustment combination.  */
-
-static void
-combine_stack_adjustments (void)
-{
-  basic_block bb;
-
-  FOR_EACH_BB (bb)
-    combine_stack_adjustments_for_block (bb);
-}
-
-/* Recognize a MEM of the form (sp) or (plus sp const).  */
-
-static int
-stack_memref_p (rtx x)
-{
-  if (!MEM_P (x))
-    return 0;
-  x = XEXP (x, 0);
-
-  if (x == stack_pointer_rtx)
-    return 1;
-  if (GET_CODE (x) == PLUS
-      && XEXP (x, 0) == stack_pointer_rtx
-      && GET_CODE (XEXP (x, 1)) == CONST_INT)
-    return 1;
-
-  return 0;
-}
-
-/* Recognize either normal single_set or the hack in i386.md for
-   tying fp and sp adjustments.  */
-
-static rtx
-single_set_for_csa (rtx insn)
-{
-  int i;
-  rtx tmp = single_set (insn);
-  if (tmp)
-    return tmp;
-
-  if (!NONJUMP_INSN_P (insn)
-      || GET_CODE (PATTERN (insn)) != PARALLEL)
-    return NULL_RTX;
-
-  tmp = PATTERN (insn);
-  if (GET_CODE (XVECEXP (tmp, 0, 0)) != SET)
-    return NULL_RTX;
-
-  for (i = 1; i < XVECLEN (tmp, 0); ++i)
-    {
-      rtx this = XVECEXP (tmp, 0, i);
-
-      /* The special case is allowing a no-op set.  */
-      if (GET_CODE (this) == SET
-         && SET_SRC (this) == SET_DEST (this))
-       ;
-      else if (GET_CODE (this) != CLOBBER
-              && GET_CODE (this) != USE)
-       return NULL_RTX;
-    }
 
-  return XVECEXP (tmp, 0, 0);
-}
-
-/* Free the list of csa_memlist nodes.  */
-
-static void
-free_csa_memlist (struct csa_memlist *memlist)
-{
-  struct csa_memlist *next;
-  for (; memlist ; memlist = next)
-    {
-      next = memlist->next;
-      free (memlist);
-    }
-}
-
-/* Create a new csa_memlist node from the given memory reference.
-   It is already known that the memory is stack_memref_p.  */
-
-static struct csa_memlist *
-record_one_stack_memref (rtx insn, rtx *mem, struct csa_memlist *next_memlist)
-{
-  struct csa_memlist *ml;
-
-  ml = XNEW (struct csa_memlist);
-
-  if (XEXP (*mem, 0) == stack_pointer_rtx)
-    ml->sp_offset = 0;
-  else
-    ml->sp_offset = INTVAL (XEXP (XEXP (*mem, 0), 1));
-
-  ml->insn = insn;
-  ml->mem = mem;
-  ml->next = next_memlist;
-
-  return ml;
-}
-
-/* Attempt to apply ADJUST to the stack adjusting insn INSN, as well
-   as each of the memories in MEMLIST.  Return true on success.  */
-
-static int
-try_apply_stack_adjustment (rtx insn, struct csa_memlist *memlist, HOST_WIDE_INT new_adjust,
-                           HOST_WIDE_INT delta)
-{
-  struct csa_memlist *ml;
-  rtx set;
-
-  set = single_set_for_csa (insn);
-  validate_change (insn, &XEXP (SET_SRC (set), 1), GEN_INT (new_adjust), 1);
-
-  for (ml = memlist; ml ; ml = ml->next)
-    validate_change
-      (ml->insn, ml->mem,
-       replace_equiv_address_nv (*ml->mem,
-                                plus_constant (stack_pointer_rtx,
-                                               ml->sp_offset - delta)), 1);
-
-  if (apply_change_group ())
-    {
-      /* Succeeded.  Update our knowledge of the memory references.  */
-      for (ml = memlist; ml ; ml = ml->next)
-       ml->sp_offset -= delta;
-
-      return 1;
-    }
-  else
-    return 0;
-}
-
-/* Called via for_each_rtx and used to record all stack memory references in
-   the insn and discard all other stack pointer references.  */
-struct record_stack_memrefs_data
-{
-  rtx insn;
-  struct csa_memlist *memlist;
-};
-
-static int
-record_stack_memrefs (rtx *xp, void *data)
-{
-  rtx x = *xp;
-  struct record_stack_memrefs_data *d =
-    (struct record_stack_memrefs_data *) data;
-  if (!x)
-    return 0;
-  switch (GET_CODE (x))
-    {
-    case MEM:
-      if (!reg_mentioned_p (stack_pointer_rtx, x))
-       return -1;
-      /* We are not able to handle correctly all possible memrefs containing
-         stack pointer, so this check is necessary.  */
-      if (stack_memref_p (x))
-       {
-         d->memlist = record_one_stack_memref (d->insn, xp, d->memlist);
-         return -1;
-       }
-      return 1;
-    case REG:
-      /* ??? We want be able to handle non-memory stack pointer
-        references later.  For now just discard all insns referring to
-        stack pointer outside mem expressions.  We would probably
-        want to teach validate_replace to simplify expressions first.
-
-        We can't just compare with STACK_POINTER_RTX because the
-        reference to the stack pointer might be in some other mode.
-        In particular, an explicit clobber in an asm statement will
-        result in a QImode clobber.  */
-      if (REGNO (x) == STACK_POINTER_REGNUM)
-       return 1;
-      break;
-    default:
-      break;
-    }
-  return 0;
-}
-
-/* Subroutine of combine_stack_adjustments, called for each basic block.  */
-
-static void
-combine_stack_adjustments_for_block (basic_block bb)
-{
-  HOST_WIDE_INT last_sp_adjust = 0;
-  rtx last_sp_set = NULL_RTX;
-  struct csa_memlist *memlist = NULL;
-  rtx insn, next, set;
-  struct record_stack_memrefs_data data;
-  bool end_of_block = false;
-
-  for (insn = BB_HEAD (bb); !end_of_block ; insn = next)
-    {
-      end_of_block = insn == BB_END (bb);
-      next = NEXT_INSN (insn);
-
-      if (! INSN_P (insn))
-       continue;
-
-      set = single_set_for_csa (insn);
-      if (set)
-       {
-         rtx dest = SET_DEST (set);
-         rtx src = SET_SRC (set);
-
-         /* Find constant additions to the stack pointer.  */
-         if (dest == stack_pointer_rtx
-             && GET_CODE (src) == PLUS
-             && XEXP (src, 0) == stack_pointer_rtx
-             && GET_CODE (XEXP (src, 1)) == CONST_INT)
-           {
-             HOST_WIDE_INT this_adjust = INTVAL (XEXP (src, 1));
-
-             /* If we've not seen an adjustment previously, record
-                it now and continue.  */
-             if (! last_sp_set)
-               {
-                 last_sp_set = insn;
-                 last_sp_adjust = this_adjust;
-                 continue;
-               }
-
-             /* If not all recorded memrefs can be adjusted, or the
-                adjustment is now too large for a constant addition,
-                we cannot merge the two stack adjustments.
-
-                Also we need to be careful to not move stack pointer
-                such that we create stack accesses outside the allocated
-                area.  We can combine an allocation into the first insn,
-                or a deallocation into the second insn.  We can not
-                combine an allocation followed by a deallocation.
-
-                The only somewhat frequent occurrence of the later is when
-                a function allocates a stack frame but does not use it.
-                For this case, we would need to analyze rtl stream to be
-                sure that allocated area is really unused.  This means not
-                only checking the memory references, but also all registers
-                or global memory references possibly containing a stack
-                frame address.
-
-                Perhaps the best way to address this problem is to teach
-                gcc not to allocate stack for objects never used.  */
-
-             /* Combine an allocation into the first instruction.  */
-             if (STACK_GROWS_DOWNWARD ? this_adjust <= 0 : this_adjust >= 0)
-               {
-                 if (try_apply_stack_adjustment (last_sp_set, memlist,
-                                                 last_sp_adjust + this_adjust,
-                                                 this_adjust))
-                   {
-                     /* It worked!  */
-                     delete_insn (insn);
-                     last_sp_adjust += this_adjust;
-                     continue;
-                   }
-               }
-
-             /* Otherwise we have a deallocation.  Do not combine with
-                a previous allocation.  Combine into the second insn.  */
-             else if (STACK_GROWS_DOWNWARD
-                      ? last_sp_adjust >= 0 : last_sp_adjust <= 0)
-               {
-                 if (try_apply_stack_adjustment (insn, memlist,
-                                                 last_sp_adjust + this_adjust,
-                                                 -last_sp_adjust))
-                   {
-                     /* It worked!  */
-                     delete_insn (last_sp_set);
-                     last_sp_set = insn;
-                     last_sp_adjust += this_adjust;
-                     free_csa_memlist (memlist);
-                     memlist = NULL;
-                     continue;
-                   }
-               }
-
-             /* Combination failed.  Restart processing from here.  If
-                deallocation+allocation conspired to cancel, we can
-                delete the old deallocation insn.  */
-             if (last_sp_set && last_sp_adjust == 0)
-               delete_insn (insn);
-             free_csa_memlist (memlist);
-             memlist = NULL;
-             last_sp_set = insn;
-             last_sp_adjust = this_adjust;
-             continue;
-           }
-
-         /* Find a predecrement of exactly the previous adjustment and
-            turn it into a direct store.  Obviously we can't do this if
-            there were any intervening uses of the stack pointer.  */
-         if (memlist == NULL
-             && MEM_P (dest)
-             && ((GET_CODE (XEXP (dest, 0)) == PRE_DEC
-                  && (last_sp_adjust
-                      == (HOST_WIDE_INT) GET_MODE_SIZE (GET_MODE (dest))))
-                 || (GET_CODE (XEXP (dest, 0)) == PRE_MODIFY
-                     && GET_CODE (XEXP (XEXP (dest, 0), 1)) == PLUS
-                     && XEXP (XEXP (XEXP (dest, 0), 1), 0) == stack_pointer_rtx
-                     && (GET_CODE (XEXP (XEXP (XEXP (dest, 0), 1), 1))
-                         == CONST_INT)
-                     && (INTVAL (XEXP (XEXP (XEXP (dest, 0), 1), 1))
-                         == -last_sp_adjust)))
-             && XEXP (XEXP (dest, 0), 0) == stack_pointer_rtx
-             && ! reg_mentioned_p (stack_pointer_rtx, src)
-             && memory_address_p (GET_MODE (dest), stack_pointer_rtx)
-             && validate_change (insn, &SET_DEST (set),
-                                 replace_equiv_address (dest,
-                                                        stack_pointer_rtx),
-                                 0))
-           {
-             delete_insn (last_sp_set);
-             free_csa_memlist (memlist);
-             memlist = NULL;
-             last_sp_set = NULL_RTX;
-             last_sp_adjust = 0;
-             continue;
-           }
-       }
-
-      data.insn = insn;
-      data.memlist = memlist;
-      if (!CALL_P (insn) && last_sp_set
-         && !for_each_rtx (&PATTERN (insn), record_stack_memrefs, &data))
-       {
-          memlist = data.memlist;
-          continue;
-       }
-      memlist = data.memlist;
-
-      /* Otherwise, we were not able to process the instruction.
-        Do not continue collecting data across such a one.  */
-      if (last_sp_set
-         && (CALL_P (insn)
-             || reg_mentioned_p (stack_pointer_rtx, PATTERN (insn))))
-       {
-         if (last_sp_set && last_sp_adjust == 0)
-           delete_insn (last_sp_set);
-         free_csa_memlist (memlist);
-         memlist = NULL;
-         last_sp_set = NULL_RTX;
-         last_sp_adjust = 0;
-       }
-    }
-
-  if (last_sp_set && last_sp_adjust == 0)
-    delete_insn (last_sp_set);
-
-  if (memlist)
-    free_csa_memlist (memlist);
-}
-\f
 static bool
 gate_handle_regmove (void)
 {
   return (optimize > 0 && flag_regmove);
 }
 
-
 /* Register allocation pre-pass, to reduce number of moves necessary
    for two-address machines.  */
 static unsigned int
@@ -2513,46 +2118,3 @@ struct tree_opt_pass pass_regmove =
   'N'                                   /* letter */
 };
 
-
-static bool
-gate_handle_stack_adjustments (void)
-{
-  return (optimize > 0);
-}
-
-static unsigned int
-rest_of_handle_stack_adjustments (void)
-{
-  life_analysis (PROP_POSTRELOAD);
-  cleanup_cfg (CLEANUP_EXPENSIVE | CLEANUP_UPDATE_LIFE
-               | (flag_crossjumping ? CLEANUP_CROSSJUMP : 0));
-
-  /* This is kind of a heuristic.  We need to run combine_stack_adjustments
-     even for machines with possibly nonzero RETURN_POPS_ARGS
-     and ACCUMULATE_OUTGOING_ARGS.  We expect that only ports having
-     push instructions will have popping returns.  */
-#ifndef PUSH_ROUNDING
-  if (!ACCUMULATE_OUTGOING_ARGS)
-#endif
-    combine_stack_adjustments ();
-  return 0;
-}
-
-struct tree_opt_pass pass_stack_adjustments =
-{
-  "csa",                                /* name */
-  gate_handle_stack_adjustments,        /* gate */
-  rest_of_handle_stack_adjustments,     /* execute */
-  NULL,                                 /* sub */
-  NULL,                                 /* next */
-  0,                                    /* static_pass_number */
-  0,                                    /* tv_id */
-  0,                                    /* properties_required */
-  0,                                    /* properties_provided */
-  0,                                    /* properties_destroyed */
-  0,                                    /* todo_flags_start */
-  TODO_dump_func |
-  TODO_ggc_collect,                     /* todo_flags_finish */
-  0                                     /* letter */
-};
-