/* Subroutines used by or related to instruction recognition.
Copyright (C) 1987, 1988, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
- 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
This file is part of GCC.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA. */
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
#include "config.h"
#include "basic-block.h"
#include "output.h"
#include "reload.h"
+#include "timevar.h"
+#include "tree-pass.h"
#ifndef STACK_PUSH_CODE
#ifdef STACK_GROWS_DOWNWARD
#endif
#endif
-static void validate_replace_rtx_1 PARAMS ((rtx *, rtx, rtx, rtx));
-static rtx *find_single_use_1 PARAMS ((rtx, rtx *));
-static void validate_replace_src_1 PARAMS ((rtx *, void *));
-static rtx split_insn PARAMS ((rtx));
+static void validate_replace_rtx_1 (rtx *, rtx, rtx, rtx);
+static rtx *find_single_use_1 (rtx, rtx *);
+static void validate_replace_src_1 (rtx *, void *);
+static rtx split_insn (rtx);
/* Nonzero means allow operands to be volatile.
This should be 0 if you are generating rtl, such as if you are calling
int reload_completed;
+/* Nonzero after thread_prologue_and_epilogue_insns has run. */
+int epilogue_completed;
+
/* Initialize data used by the function `recog'.
This must be called once in the compilation of a function
before any insn recognition may be done in the function. */
void
-init_recog_no_volatile ()
+init_recog_no_volatile (void)
{
volatile_ok = 0;
}
void
-init_recog ()
+init_recog (void)
{
volatile_ok = 1;
}
-/* Try recognizing the instruction INSN,
- and return the code number that results.
- Remember the code so that repeated calls do not
- need to spend the time for actual rerecognition.
-
- This function is the normal interface to instruction recognition.
- The automatically-generated function `recog' is normally called
- through this one. (The only exception is in combine.c.) */
-
-int
-recog_memoized_1 (insn)
- rtx insn;
-{
- if (INSN_CODE (insn) < 0)
- INSN_CODE (insn) = recog (PATTERN (insn), insn, 0);
- return INSN_CODE (insn);
-}
\f
/* Check that X is an insn-body for an `asm' with operands
and that the operands mentioned in it are legitimate. */
int
-check_asm_operands (x)
- rtx x;
+check_asm_operands (rtx x)
{
int noperands;
rtx *operands;
if (noperands == 0)
return 1;
- operands = (rtx *) alloca (noperands * sizeof (rtx));
- constraints = (const char **) alloca (noperands * sizeof (char *));
+ operands = alloca (noperands * sizeof (rtx));
+ constraints = alloca (noperands * sizeof (char *));
decode_asm_operands (x, operands, NULL, constraints, NULL);
Otherwise, perform the change and return 1. */
int
-validate_change (object, loc, new, in_group)
- rtx object;
- rtx *loc;
- rtx new;
- int in_group;
+validate_change (rtx object, rtx *loc, rtx new, int in_group)
{
rtx old = *loc;
if (old == new || rtx_equal_p (old, new))
return 1;
- if (in_group == 0 && num_changes != 0)
- abort ();
+ gcc_assert (in_group != 0 || num_changes == 0);
*loc = new;
else
changes_allocated *= 2;
- changes =
- (change_t*) xrealloc (changes,
- sizeof (change_t) * changes_allocated);
+ changes = xrealloc (changes, sizeof (change_t) * changes_allocated);
}
changes[num_changes].object = object;
changes[num_changes].loc = loc;
changes[num_changes].old = old;
- if (object && GET_CODE (object) != MEM)
+ if (object && !MEM_P (object))
{
/* Set INSN_CODE to force rerecognition of insn. Save old code in
case invalid. */
return apply_change_group ();
}
+
+/* Function to be passed to for_each_rtx to test whether a piece of
+ RTL contains any mem/v. */
+static int
+volatile_mem_p (rtx *x, void *data ATTRIBUTE_UNUSED)
+{
+ return (MEM_P (*x) && MEM_VOLATILE_P (*x));
+}
+
+/* Same as validate_change, but doesn't support groups, and it accepts
+ volatile mems if they're already present in the original insn. */
+
+int
+validate_change_maybe_volatile (rtx object, rtx *loc, rtx new)
+{
+ int result;
+
+ if (validate_change (object, loc, new, 0))
+ return 1;
+
+ if (volatile_ok
+ /* If there isn't a volatile MEM, there's nothing we can do. */
+ || !for_each_rtx (&PATTERN (object), volatile_mem_p, 0)
+ /* Make sure we're not adding or removing volatile MEMs. */
+ || for_each_rtx (loc, volatile_mem_p, 0)
+ || for_each_rtx (&new, volatile_mem_p, 0)
+ || !insn_invalid_p (object))
+ return 0;
+
+ volatile_ok = 1;
+
+ gcc_assert (!insn_invalid_p (object));
+
+ result = validate_change (object, loc, new, 0);
+
+ volatile_ok = 0;
+
+ return result;
+}
+
/* This subroutine of apply_change_group verifies whether the changes to INSN
were valid; i.e. whether INSN can still be recognized. */
int
-insn_invalid_p (insn)
- rtx insn;
+insn_invalid_p (rtx insn)
{
rtx pat = PATTERN (insn);
int num_clobbers = 0;
/* Return number of changes made and not validated yet. */
int
-num_changes_pending ()
+num_changes_pending (void)
{
return num_changes;
}
-/* Apply a group of changes previously issued with `validate_change'.
+/* Tentatively apply the changes numbered NUM and up.
Return 1 if all changes are valid, zero otherwise. */
int
-apply_change_group ()
+verify_changes (int num)
{
int i;
rtx last_validated = NULL_RTX;
we also require that the operands meet the constraints for
the insn. */
- for (i = 0; i < num_changes; i++)
+ for (i = num; i < num_changes; i++)
{
rtx object = changes[i].object;
- /* if there is no object to test or if it is the same as the one we
+ /* If there is no object to test or if it is the same as the one we
already tested, ignore it. */
if (object == 0 || object == last_validated)
continue;
- if (GET_CODE (object) == MEM)
+ if (MEM_P (object))
{
if (! memory_address_p (GET_MODE (object), XEXP (object, 0)))
break;
last_validated = object;
}
- if (i == num_changes)
- {
- basic_block bb;
+ return (i == num_changes);
+}
+
+/* A group of changes has previously been issued with validate_change and
+ verified with verify_changes. Update the BB_DIRTY flags of the affected
+ blocks, and clear num_changes. */
+
+void
+confirm_change_group (void)
+{
+ int i;
+ basic_block bb;
+
+ for (i = 0; i < num_changes; i++)
+ if (changes[i].object
+ && INSN_P (changes[i].object)
+ && (bb = BLOCK_FOR_INSN (changes[i].object)))
+ bb->flags |= BB_DIRTY;
- for (i = 0; i < num_changes; i++)
- if (changes[i].object
- && INSN_P (changes[i].object)
- && (bb = BLOCK_FOR_INSN (changes[i].object)))
- bb->flags |= BB_DIRTY;
+ num_changes = 0;
+}
- num_changes = 0;
+/* Apply a group of changes previously issued with `validate_change'.
+ If all changes are valid, call confirm_change_group and return 1,
+ otherwise, call cancel_changes and return 0. */
+
+int
+apply_change_group (void)
+{
+ if (verify_changes (0))
+ {
+ confirm_change_group ();
return 1;
}
else
}
}
+
/* Return the number of changes so far in the current group. */
int
-num_validated_changes ()
+num_validated_changes (void)
{
return num_changes;
}
/* Retract the changes numbered NUM and up. */
void
-cancel_changes (num)
- int num;
+cancel_changes (int num)
{
int i;
for (i = num_changes - 1; i >= num; i--)
{
*changes[i].loc = changes[i].old;
- if (changes[i].object && GET_CODE (changes[i].object) != MEM)
+ if (changes[i].object && !MEM_P (changes[i].object))
INSN_CODE (changes[i].object) = changes[i].old_code;
}
num_changes = num;
validate_change passing OBJECT. */
static void
-validate_replace_rtx_1 (loc, from, to, object)
- rtx *loc;
- rtx from, to, object;
+validate_replace_rtx_1 (rtx *loc, rtx from, rtx to, rtx object)
{
int i, j;
const char *fmt;
operands look similar. */
if (x == from
- || (GET_CODE (x) == REG && GET_CODE (from) == REG
+ || (REG_P (x) && REG_P (from)
&& GET_MODE (x) == GET_MODE (from)
&& REGNO (x) == REGNO (from))
|| (GET_CODE (x) == GET_CODE (from) && GET_MODE (x) == GET_MODE (from)
return;
}
- /* Call ourself recursively to perform the replacements. */
+ /* Call ourself recursively to perform the replacements.
+ We must not replace inside already replaced expression, otherwise we
+ get infinite recursion for replacements like (reg X)->(subreg (reg X))
+ done by regmove, so we must special case shared ASM_OPERANDS. */
- for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ if (GET_CODE (x) == PARALLEL)
{
- if (fmt[i] == 'e')
- validate_replace_rtx_1 (&XEXP (x, i), from, to, object);
- else if (fmt[i] == 'E')
- for (j = XVECLEN (x, i) - 1; j >= 0; j--)
- validate_replace_rtx_1 (&XVECEXP (x, i, j), from, to, object);
+ for (j = XVECLEN (x, 0) - 1; j >= 0; j--)
+ {
+ if (j && GET_CODE (XVECEXP (x, 0, j)) == SET
+ && GET_CODE (SET_SRC (XVECEXP (x, 0, j))) == ASM_OPERANDS)
+ {
+ /* Verify that operands are really shared. */
+ gcc_assert (ASM_OPERANDS_INPUT_VEC (SET_SRC (XVECEXP (x, 0, 0)))
+ == ASM_OPERANDS_INPUT_VEC (SET_SRC (XVECEXP
+ (x, 0, j))));
+ validate_replace_rtx_1 (&SET_DEST (XVECEXP (x, 0, j)),
+ from, to, object);
+ }
+ else
+ validate_replace_rtx_1 (&XVECEXP (x, 0, j), from, to, object);
+ }
}
+ else
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
+ {
+ if (fmt[i] == 'e')
+ validate_replace_rtx_1 (&XEXP (x, i), from, to, object);
+ else if (fmt[i] == 'E')
+ for (j = XVECLEN (x, i) - 1; j >= 0; j--)
+ validate_replace_rtx_1 (&XVECEXP (x, i, j), from, to, object);
+ }
/* If we didn't substitute, there is nothing more to do. */
if (num_changes == prev_changes)
/* Do changes needed to keep rtx consistent. Don't do any other
simplifications, as it is not our job. */
- if ((GET_RTX_CLASS (code) == '<' || GET_RTX_CLASS (code) == 'c')
+ if (SWAPPABLE_OPERANDS_P (x)
&& swap_commutative_operands_p (XEXP (x, 0), XEXP (x, 1)))
{
validate_change (object, loc,
- gen_rtx_fmt_ee (GET_RTX_CLASS (code) == 'c' ? code
+ gen_rtx_fmt_ee (COMMUTATIVE_ARITH_P (x) ? code
: swap_condition (code),
GET_MODE (x), XEXP (x, 1),
XEXP (x, 0)), 1);
likely to be an insertion operation; if it was, nothing bad will
happen, we might just fail in some cases). */
- if (GET_CODE (XEXP (x, 0)) == MEM
+ if (MEM_P (XEXP (x, 0))
&& GET_CODE (XEXP (x, 1)) == CONST_INT
&& GET_CODE (XEXP (x, 2)) == CONST_INT
&& !mode_dependent_address_p (XEXP (XEXP (x, 0), 0))
if INSN is still valid. */
int
-validate_replace_rtx_subexp (from, to, insn, loc)
- rtx from, to, insn, *loc;
+validate_replace_rtx_subexp (rtx from, rtx to, rtx insn, rtx *loc)
{
validate_replace_rtx_1 (loc, from, to, insn);
return apply_change_group ();
changes have been made, validate by seeing if INSN is still valid. */
int
-validate_replace_rtx (from, to, insn)
- rtx from, to, insn;
+validate_replace_rtx (rtx from, rtx to, rtx insn)
{
validate_replace_rtx_1 (&PATTERN (insn), from, to, insn);
return apply_change_group ();
/* Try replacing every occurrence of FROM in INSN with TO. */
void
-validate_replace_rtx_group (from, to, insn)
- rtx from, to, insn;
+validate_replace_rtx_group (rtx from, rtx to, rtx insn)
{
validate_replace_rtx_1 (&PATTERN (insn), from, to, insn);
}
};
static void
-validate_replace_src_1 (x, data)
- rtx *x;
- void *data;
+validate_replace_src_1 (rtx *x, void *data)
{
struct validate_replace_src_data *d
= (struct validate_replace_src_data *) data;
SET_DESTs. */
void
-validate_replace_src_group (from, to, insn)
- rtx from, to, insn;
+validate_replace_src_group (rtx from, rtx to, rtx insn)
{
struct validate_replace_src_data d;
d.insn = insn;
note_uses (&PATTERN (insn), validate_replace_src_1, &d);
}
-
-/* Same as validate_replace_src_group, but validate by seeing if
- INSN is still valid. */
-int
-validate_replace_src (from, to, insn)
- rtx from, to, insn;
-{
- validate_replace_src_group (from, to, insn);
- return apply_change_group ();
-}
\f
#ifdef HAVE_cc0
/* Return 1 if the insn using CC0 set by INSN does not contain
EQ and NE tests do not count. */
int
-next_insn_tests_no_inequality (insn)
- rtx insn;
+next_insn_tests_no_inequality (rtx insn)
{
rtx next = next_cc0_user (insn);
if (next == 0)
return 0;
- return ((GET_CODE (next) == JUMP_INSN
- || GET_CODE (next) == INSN
- || GET_CODE (next) == CALL_INSN)
+ return (INSN_P (next)
&& ! inequality_comparisons_p (PATTERN (next)));
}
-
-#if 0 /* This is useless since the insn that sets the cc's
- must be followed immediately by the use of them. */
-/* Return 1 if the CC value set up by INSN is not used. */
-
-int
-next_insns_test_no_inequality (insn)
- rtx insn;
-{
- rtx next = NEXT_INSN (insn);
-
- for (; next != 0; next = NEXT_INSN (next))
- {
- if (GET_CODE (next) == CODE_LABEL
- || GET_CODE (next) == BARRIER)
- return 1;
- if (GET_CODE (next) == NOTE)
- continue;
- if (inequality_comparisons_p (PATTERN (next)))
- return 0;
- if (sets_cc0_p (PATTERN (next)) == 1)
- return 1;
- if (! reg_mentioned_p (cc0_rtx, PATTERN (next)))
- return 1;
- }
- return 1;
-}
-#endif
#endif
\f
/* This is used by find_single_use to locate an rtx that contains exactly one
DEST that are being used to totally replace it are not counted. */
static rtx *
-find_single_use_1 (dest, loc)
- rtx dest;
- rtx *loc;
+find_single_use_1 (rtx dest, rtx *loc)
{
rtx x = *loc;
enum rtx_code code = GET_CODE (x);
need just check the source. */
if (GET_CODE (SET_DEST (x)) != CC0
&& GET_CODE (SET_DEST (x)) != PC
- && GET_CODE (SET_DEST (x)) != REG
+ && !REG_P (SET_DEST (x))
&& ! (GET_CODE (SET_DEST (x)) == SUBREG
- && GET_CODE (SUBREG_REG (SET_DEST (x))) == REG
+ && REG_P (SUBREG_REG (SET_DEST (x)))
&& (((GET_MODE_SIZE (GET_MODE (SUBREG_REG (SET_DEST (x))))
+ (UNITS_PER_WORD - 1)) / UNITS_PER_WORD)
== ((GET_MODE_SIZE (GET_MODE (SET_DEST (x)))
if (fmt[i] == 'e')
{
if (dest == XEXP (x, i)
- || (GET_CODE (dest) == REG && GET_CODE (XEXP (x, i)) == REG
+ || (REG_P (dest) && REG_P (XEXP (x, i))
&& REGNO (dest) == REGNO (XEXP (x, i))))
this_result = loc;
else
for (j = XVECLEN (x, i) - 1; j >= 0; j--)
{
if (XVECEXP (x, i, j) == dest
- || (GET_CODE (dest) == REG
- && GET_CODE (XVECEXP (x, i, j)) == REG
+ || (REG_P (dest)
+ && REG_P (XVECEXP (x, i, j))
&& REGNO (XVECEXP (x, i, j)) == REGNO (dest)))
this_result = loc;
else
and last insn referencing DEST. */
rtx *
-find_single_use (dest, insn, ploc)
- rtx dest;
- rtx insn;
- rtx *ploc;
+find_single_use (rtx dest, rtx insn, rtx *ploc)
{
rtx next;
rtx *result;
{
next = NEXT_INSN (insn);
if (next == 0
- || (GET_CODE (next) != INSN && GET_CODE (next) != JUMP_INSN))
+ || (!NONJUMP_INSN_P (next) && !JUMP_P (next)))
return 0;
result = find_single_use_1 (dest, &PATTERN (next));
}
#endif
- if (reload_completed || reload_in_progress || GET_CODE (dest) != REG)
+ if (reload_completed || reload_in_progress || !REG_P (dest))
return 0;
for (next = next_nonnote_insn (insn);
- next != 0 && GET_CODE (next) != CODE_LABEL;
+ next != 0 && !LABEL_P (next);
next = next_nonnote_insn (next))
if (INSN_P (next) && dead_or_set_p (next, dest))
{
class NO_REGS, see the comment for `register_operand'. */
int
-general_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+general_operand (rtx op, enum machine_mode mode)
{
enum rtx_code code = GET_CODE (op);
if (CONSTANT_P (op))
return ((GET_MODE (op) == VOIDmode || GET_MODE (op) == mode
|| mode == VOIDmode)
-#ifdef LEGITIMATE_PIC_OPERAND_P
&& (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))
-#endif
&& LEGITIMATE_CONSTANT_P (op));
/* Except for certain constants with VOIDmode, already checked for,
#ifdef INSN_SCHEDULING
/* On machines that have insn scheduling, we want all memory
- reference to be explicit, so outlaw paradoxical SUBREGs. */
- if (GET_CODE (sub) == MEM
+ reference to be explicit, so outlaw paradoxical SUBREGs.
+ However, we must allow them after reload so that they can
+ get cleaned up by cleanup_subreg_operands. */
+ if (!reload_completed && MEM_P (sub)
&& GET_MODE_SIZE (mode) > GET_MODE_SIZE (GET_MODE (sub)))
return 0;
#endif
??? This is a kludge. */
if (!reload_completed && SUBREG_BYTE (op) != 0
- && GET_CODE (sub) == MEM)
+ && MEM_P (sub))
return 0;
/* FLOAT_MODE subregs can't be paradoxical. Combine will occasionally
- create such rtl, and we must reject it. */
- if (GET_MODE_CLASS (GET_MODE (op)) == MODE_FLOAT
+ create such rtl, and we must reject it. */
+ if (SCALAR_FLOAT_MODE_P (GET_MODE (op))
&& GET_MODE_SIZE (GET_MODE (op)) > GET_MODE_SIZE (GET_MODE (sub)))
return 0;
if (! volatile_ok && MEM_VOLATILE_P (op))
return 0;
- if (GET_CODE (y) == ADDRESSOF)
- return 1;
-
/* Use the mem's mode, since it will be reloaded thus. */
- mode = GET_MODE (op);
- GO_IF_LEGITIMATE_ADDRESS (mode, y, win);
+ if (memory_address_p (GET_MODE (op), y))
+ return 1;
}
- /* Pretend this is an operand for now; we'll run force_operand
- on its replacement in fixup_var_refs_1. */
- if (code == ADDRESSOF)
- return 1;
-
return 0;
-
- win:
- return 1;
}
\f
/* Return 1 if OP is a valid memory address for a memory reference
expressions in the machine description. */
int
-address_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+address_operand (rtx op, enum machine_mode mode)
{
return memory_address_p (mode, op);
}
it is most consistent to keep this function from accepting them. */
int
-register_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+register_operand (rtx op, enum machine_mode mode)
{
if (GET_MODE (op) != mode && mode != VOIDmode)
return 0;
(Ideally, (SUBREG (MEM)...) should not exist after reload,
but currently it does result from (SUBREG (REG)...) where the
reg went on the stack.) */
- if (! reload_completed && GET_CODE (sub) == MEM)
+ if (! reload_completed && MEM_P (sub))
return general_operand (op, mode);
#ifdef CANNOT_CHANGE_MODE_CLASS
- if (GET_CODE (sub) == REG
+ if (REG_P (sub)
&& REGNO (sub) < FIRST_PSEUDO_REGISTER
&& REG_CANNOT_CHANGE_MODE_P (REGNO (sub), GET_MODE (sub), mode)
&& GET_MODE_CLASS (GET_MODE (sub)) != MODE_COMPLEX_INT
/* FLOAT_MODE subregs can't be paradoxical. Combine will occasionally
create such rtl, and we must reject it. */
- if (GET_MODE_CLASS (GET_MODE (op)) == MODE_FLOAT
+ if (SCALAR_FLOAT_MODE_P (GET_MODE (op))
&& GET_MODE_SIZE (GET_MODE (op)) > GET_MODE_SIZE (GET_MODE (sub)))
return 0;
op = sub;
}
- /* If we have an ADDRESSOF, consider it valid since it will be
- converted into something that will not be a MEM. */
- if (GET_CODE (op) == ADDRESSOF)
- return 1;
-
/* We don't consider registers whose class is NO_REGS
to be a register operand. */
- return (GET_CODE (op) == REG
+ return (REG_P (op)
&& (REGNO (op) >= FIRST_PSEUDO_REGISTER
|| REGNO_REG_CLASS (REGNO (op)) != NO_REGS));
}
/* Return 1 for a register in Pmode; ignore the tested mode. */
int
-pmode_register_operand (op, mode)
- rtx op;
- enum machine_mode mode ATTRIBUTE_UNUSED;
+pmode_register_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
{
return register_operand (op, Pmode);
}
or a hard register. */
int
-scratch_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+scratch_operand (rtx op, enum machine_mode mode)
{
if (GET_MODE (op) != mode && mode != VOIDmode)
return 0;
return (GET_CODE (op) == SCRATCH
- || (GET_CODE (op) == REG
+ || (REG_P (op)
&& REGNO (op) < FIRST_PSEUDO_REGISTER));
}
expressions in the machine description. */
int
-immediate_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+immediate_operand (rtx op, enum machine_mode mode)
{
/* Don't accept CONST_INT or anything similar
if the caller wants something floating. */
&& trunc_int_for_mode (INTVAL (op), mode) != INTVAL (op))
return 0;
- /* Accept CONSTANT_P_RTX, since it will be gone by CSE1 and
- result in 0/1. It seems a safe assumption that this is
- in range for everyone. */
- if (GET_CODE (op) == CONSTANT_P_RTX)
- return 1;
-
return (CONSTANT_P (op)
&& (GET_MODE (op) == mode || mode == VOIDmode
|| GET_MODE (op) == VOIDmode)
-#ifdef LEGITIMATE_PIC_OPERAND_P
&& (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))
-#endif
&& LEGITIMATE_CONSTANT_P (op));
}
/* Returns 1 if OP is an operand that is a CONST_INT. */
int
-const_int_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+const_int_operand (rtx op, enum machine_mode mode)
{
if (GET_CODE (op) != CONST_INT)
return 0;
floating-point number. */
int
-const_double_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+const_double_operand (rtx op, enum machine_mode mode)
{
/* Don't accept CONST_INT or anything similar
if the caller wants something floating. */
/* Return 1 if OP is a general operand that is not an immediate operand. */
int
-nonimmediate_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+nonimmediate_operand (rtx op, enum machine_mode mode)
{
return (general_operand (op, mode) && ! CONSTANT_P (op));
}
/* Return 1 if OP is a register reference or immediate value of mode MODE. */
int
-nonmemory_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+nonmemory_operand (rtx op, enum machine_mode mode)
{
if (CONSTANT_P (op))
{
return ((GET_MODE (op) == VOIDmode || GET_MODE (op) == mode
|| mode == VOIDmode)
-#ifdef LEGITIMATE_PIC_OPERAND_P
&& (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))
-#endif
&& LEGITIMATE_CONSTANT_P (op));
}
(Ideally, (SUBREG (MEM)...) should not exist after reload,
but currently it does result from (SUBREG (REG)...) where the
reg went on the stack.) */
- if (! reload_completed && GET_CODE (SUBREG_REG (op)) == MEM)
+ if (! reload_completed && MEM_P (SUBREG_REG (op)))
return general_operand (op, mode);
op = SUBREG_REG (op);
}
/* We don't consider registers whose class is NO_REGS
to be a register operand. */
- return (GET_CODE (op) == REG
+ return (REG_P (op)
&& (REGNO (op) >= FIRST_PSEUDO_REGISTER
|| REGNO_REG_CLASS (REGNO (op)) != NO_REGS));
}
expressions in the machine description. */
int
-push_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+push_operand (rtx op, enum machine_mode mode)
{
unsigned int rounded_size = GET_MODE_SIZE (mode);
rounded_size = PUSH_ROUNDING (rounded_size);
#endif
- if (GET_CODE (op) != MEM)
+ if (!MEM_P (op))
return 0;
if (mode != VOIDmode && GET_MODE (op) != mode)
expressions in the machine description. */
int
-pop_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+pop_operand (rtx op, enum machine_mode mode)
{
- if (GET_CODE (op) != MEM)
+ if (!MEM_P (op))
return 0;
if (mode != VOIDmode && GET_MODE (op) != mode)
/* Return 1 if ADDR is a valid memory address for mode MODE. */
int
-memory_address_p (mode, addr)
- enum machine_mode mode ATTRIBUTE_UNUSED;
- rtx addr;
+memory_address_p (enum machine_mode mode ATTRIBUTE_UNUSED, rtx addr)
{
- if (GET_CODE (addr) == ADDRESSOF)
- return 1;
-
GO_IF_LEGITIMATE_ADDRESS (mode, addr, win);
return 0;
expressions in the machine description. */
int
-memory_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+memory_operand (rtx op, enum machine_mode mode)
{
rtx inner;
if (! reload_completed)
/* Note that no SUBREG is a memory operand before end of reload pass,
because (SUBREG (MEM...)) forces reloading into a register. */
- return GET_CODE (op) == MEM && general_operand (op, mode);
+ return MEM_P (op) && general_operand (op, mode);
if (mode != VOIDmode && GET_MODE (op) != mode)
return 0;
if (GET_CODE (inner) == SUBREG)
inner = SUBREG_REG (inner);
- return (GET_CODE (inner) == MEM && general_operand (op, mode));
+ return (MEM_P (inner) && general_operand (op, mode));
}
/* Return 1 if OP is a valid indirect memory reference with mode MODE;
that is, a memory reference whose address is a general_operand. */
int
-indirect_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+indirect_operand (rtx op, enum machine_mode mode)
{
/* Before reload, a SUBREG isn't in memory (see memory_operand, above). */
if (! reload_completed
- && GET_CODE (op) == SUBREG && GET_CODE (SUBREG_REG (op)) == MEM)
+ && GET_CODE (op) == SUBREG && MEM_P (SUBREG_REG (op)))
{
int offset = SUBREG_BYTE (op);
rtx inner = SUBREG_REG (op);
&& general_operand (XEXP (XEXP (inner, 0), 0), Pmode)));
}
- return (GET_CODE (op) == MEM
+ return (MEM_P (op)
&& memory_operand (op, mode)
&& general_operand (XEXP (op, 0), Pmode));
}
MATCH_OPERATOR to recognize all the branch insns. */
int
-comparison_operator (op, mode)
- rtx op;
- enum machine_mode mode;
+comparison_operator (rtx op, enum machine_mode mode)
{
return ((mode == VOIDmode || GET_MODE (op) == mode)
- && GET_RTX_CLASS (GET_CODE (op)) == '<');
+ && COMPARISON_P (op));
}
\f
/* If BODY is an insn body that uses ASM_OPERANDS,
Otherwise return -1. */
int
-asm_noperands (body)
- rtx body;
+asm_noperands (rtx body)
{
switch (GET_CODE (body))
{
we don't store that info. */
const char *
-decode_asm_operands (body, operands, operand_locs, constraints, modes)
- rtx body;
- rtx *operands;
- rtx **operand_locs;
- const char **constraints;
- enum machine_mode *modes;
+decode_asm_operands (rtx body, rtx *operands, rtx **operand_locs,
+ const char **constraints, enum machine_mode *modes)
{
int i;
int noperands;
return template;
}
-/* Check if an asm_operand matches it's constraints.
+/* Check if an asm_operand matches its constraints.
Return > 0 if ok, = 0 if bad, < 0 if inconclusive. */
int
-asm_operand_ok (op, constraint)
- rtx op;
- const char *constraint;
+asm_operand_ok (rtx op, const char *constraint)
{
int result = 0;
/* Use constrain_operands after reload. */
- if (reload_completed)
- abort ();
+ gcc_assert (!reload_completed);
while (*constraint)
{
Match any memory and hope things are resolved after reload. */
- if (GET_CODE (op) == MEM
+ if (MEM_P (op)
&& (1
|| GET_CODE (XEXP (op, 0)) == PRE_DEC
|| GET_CODE (XEXP (op, 0)) == POST_DEC))
break;
case '>':
- if (GET_CODE (op) == MEM
+ if (MEM_P (op)
&& (1
|| GET_CODE (XEXP (op, 0)) == PRE_INC
|| GET_CODE (XEXP (op, 0)) == POST_INC))
|| (GET_CODE (op) == CONST_DOUBLE
&& GET_MODE (op) == VOIDmode))
break;
- /* FALLTHRU */
+ /* Fall through. */
case 'i':
- if (CONSTANT_P (op)
-#ifdef LEGITIMATE_PIC_OPERAND_P
- && (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))
-#endif
- )
+ if (CONSTANT_P (op) && (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op)))
result = 1;
break;
case 'X':
result = 1;
+ break;
case 'g':
if (general_operand (op, VOIDmode))
result = 1;
}
#ifdef EXTRA_CONSTRAINT_STR
- if (EXTRA_CONSTRAINT_STR (op, c, constraint))
+ else if (EXTRA_CONSTRAINT_STR (op, c, constraint))
+ result = 1;
+ else if (EXTRA_MEMORY_CONSTRAINT (c, constraint)
+ /* Every memory operand can be reloaded to fit. */
+ && memory_operand (op, VOIDmode))
+ result = 1;
+ else if (EXTRA_ADDRESS_CONSTRAINT (c, constraint)
+ /* Every address operand can be reloaded to fit. */
+ && address_operand (op, VOIDmode))
result = 1;
- if (EXTRA_MEMORY_CONSTRAINT (c, constraint))
- {
- /* Every memory operand can be reloaded to fit. */
- if (memory_operand (op, VOIDmode))
- result = 1;
- }
- if (EXTRA_ADDRESS_CONSTRAINT (c, constraint))
- {
- /* Every address operand can be reloaded to fit. */
- if (address_operand (op, VOIDmode))
- result = 1;
- }
#endif
break;
}
Otherwise, return a null pointer. */
rtx *
-find_constant_term_loc (p)
- rtx *p;
+find_constant_term_loc (rtx *p)
{
rtx *tem;
enum rtx_code code = GET_CODE (*p);
don't use it before reload. */
int
-offsettable_memref_p (op)
- rtx op;
+offsettable_memref_p (rtx op)
{
- return ((GET_CODE (op) == MEM)
+ return ((MEM_P (op))
&& offsettable_address_p (1, GET_MODE (op), XEXP (op, 0)));
}
consider pseudo-regs valid as index or base regs. */
int
-offsettable_nonstrict_memref_p (op)
- rtx op;
+offsettable_nonstrict_memref_p (rtx op)
{
- return ((GET_CODE (op) == MEM)
+ return ((MEM_P (op))
&& offsettable_address_p (0, GET_MODE (op), XEXP (op, 0)));
}
for the sake of use in reload.c. */
int
-offsettable_address_p (strictp, mode, y)
- int strictp;
- enum machine_mode mode;
- rtx y;
+offsettable_address_p (int strictp, enum machine_mode mode, rtx y)
{
enum rtx_code ycode = GET_CODE (y);
rtx z;
rtx y1 = y;
rtx *y2;
- int (*addressp) PARAMS ((enum machine_mode, rtx)) =
+ int (*addressp) (enum machine_mode, rtx) =
(strictp ? strict_memory_address_p : memory_address_p);
unsigned int mode_sz = GET_MODE_SIZE (mode);
return good;
}
- if (GET_RTX_CLASS (ycode) == 'a')
+ if (GET_RTX_CLASS (ycode) == RTX_AUTOINC)
return 0;
/* The offset added here is chosen as the maximum offset that
because the amount of the increment depends on the mode. */
int
-mode_dependent_address_p (addr)
- rtx addr ATTRIBUTE_UNUSED; /* Maybe used in GO_IF_MODE_DEPENDENT_ADDRESS. */
+mode_dependent_address_p (rtx addr ATTRIBUTE_UNUSED /* Maybe used in GO_IF_MODE_DEPENDENT_ADDRESS. */)
{
GO_IF_MODE_DEPENDENT_ADDRESS (addr, win);
return 0;
win: ATTRIBUTE_UNUSED_LABEL
return 1;
}
-
-/* Return 1 if OP is a general operand
- other than a memory ref with a mode dependent address. */
-
-int
-mode_independent_operand (op, mode)
- enum machine_mode mode;
- rtx op;
-{
- rtx addr;
-
- if (! general_operand (op, mode))
- return 0;
-
- if (GET_CODE (op) != MEM)
- return 1;
-
- addr = XEXP (op, 0);
- GO_IF_MODE_DEPENDENT_ADDRESS (addr, lose);
- return 1;
- /* Label `lose' might (not) be used via GO_IF_MODE_DEPENDENT_ADDRESS. */
- lose: ATTRIBUTE_UNUSED_LABEL
- return 0;
-}
\f
/* Like extract_insn, but save insn extracted and don't extract again, when
called again for the same insn expecting that recog_data still contain the
valid information. This is used primary by gen_attr infrastructure that
often does extract insn again and again. */
void
-extract_insn_cached (insn)
- rtx insn;
+extract_insn_cached (rtx insn)
{
if (recog_data.insn == insn && INSN_CODE (insn) >= 0)
return;
extract_insn (insn);
recog_data.insn = insn;
}
-/* Do cached extract_insn, constrain_operand and complain about failures.
+/* Do cached extract_insn, constrain_operands and complain about failures.
Used by insn_attrtab. */
void
-extract_constrain_insn_cached (insn)
- rtx insn;
+extract_constrain_insn_cached (rtx insn)
{
extract_insn_cached (insn);
if (which_alternative == -1
&& !constrain_operands (reload_completed))
fatal_insn_not_found (insn);
}
-/* Do cached constrain_operand and complain about failures. */
+/* Do cached constrain_operands and complain about failures. */
int
-constrain_operands_cached (strict)
- int strict;
+constrain_operands_cached (int strict)
{
if (which_alternative == -1)
return constrain_operands (strict);
/* Analyze INSN and fill in recog_data. */
void
-extract_insn (insn)
- rtx insn;
+extract_insn (rtx insn)
{
int i;
int icode;
/* This insn is an `asm' with operands. */
/* expand_asm_operands makes sure there aren't too many operands. */
- if (noperands > MAX_RECOG_OPERANDS)
- abort ();
+ gcc_assert (noperands <= MAX_RECOG_OPERANDS);
/* Now get the operand values and constraints out of the insn. */
decode_asm_operands (body, recog_data.operand,
: recog_data.constraints[i][0] == '+' ? OP_INOUT
: OP_IN);
- if (recog_data.n_alternatives > MAX_RECOG_ALTERNATIVES)
- abort ();
+ gcc_assert (recog_data.n_alternatives <= MAX_RECOG_ALTERNATIVES);
}
/* After calling extract_insn, you can use this function to extract some
information from the constraint strings into a more usable form.
The collected data is stored in recog_op_alt. */
void
-preprocess_constraints ()
+preprocess_constraints (void)
{
int i;
- memset (recog_op_alt, 0, sizeof recog_op_alt);
+ for (i = 0; i < recog_data.n_operands; i++)
+ memset (recog_op_alt[i], 0, (recog_data.n_alternatives
+ * sizeof (struct operand_alternative)));
+
for (i = 0; i < recog_data.n_operands; i++)
{
int j;
for (j = 0; j < recog_data.n_alternatives; j++)
{
- op_alt[j].class = NO_REGS;
+ op_alt[j].cl = NO_REGS;
op_alt[j].constraint = p;
op_alt[j].matches = -1;
op_alt[j].matched = -1;
case 'p':
op_alt[j].is_address = 1;
- op_alt[j].class = reg_class_subunion[(int) op_alt[j].class]
+ op_alt[j].cl = reg_class_subunion[(int) op_alt[j].cl]
[(int) MODE_BASE_REG_CLASS (VOIDmode)];
break;
- case 'g': case 'r':
- op_alt[j].class = reg_class_subunion[(int) op_alt[j].class][(int) GENERAL_REGS];
+ case 'g':
+ case 'r':
+ op_alt[j].cl =
+ reg_class_subunion[(int) op_alt[j].cl][(int) GENERAL_REGS];
break;
default:
if (EXTRA_ADDRESS_CONSTRAINT (c, p))
{
op_alt[j].is_address = 1;
- op_alt[j].class
+ op_alt[j].cl
= (reg_class_subunion
- [(int) op_alt[j].class]
+ [(int) op_alt[j].cl]
[(int) MODE_BASE_REG_CLASS (VOIDmode)]);
break;
}
- op_alt[j].class
+ op_alt[j].cl
= (reg_class_subunion
- [(int) op_alt[j].class]
+ [(int) op_alt[j].cl]
[(int) REG_CLASS_FROM_CONSTRAINT ((unsigned char) c, p)]);
break;
}
};
int
-constrain_operands (strict)
- int strict;
+constrain_operands (int strict)
{
const char *constraints[MAX_RECOG_OPERANDS];
int matching_operands[MAX_RECOG_OPERANDS];
do
{
+ int seen_earlyclobber_at = -1;
int opno;
int lose = 0;
funny_match_index = 0;
/* A unary operator may be accepted by the predicate, but it
is irrelevant for matching constraints. */
- if (GET_RTX_CLASS (GET_CODE (op)) == '1')
+ if (UNARY_P (op))
op = XEXP (op, 0);
if (GET_CODE (op) == SUBREG)
{
- if (GET_CODE (SUBREG_REG (op)) == REG
+ if (REG_P (SUBREG_REG (op))
&& REGNO (SUBREG_REG (op)) < FIRST_PSEUDO_REGISTER)
offset = subreg_regno_offset (REGNO (SUBREG_REG (op)),
GET_MODE (SUBREG_REG (op)),
case '&':
earlyclobber[opno] = 1;
+ if (seen_earlyclobber_at < 0)
+ seen_earlyclobber_at = opno;
break;
case '0': case '1': case '2': case '3': case '4':
/* A unary operator may be accepted by the predicate,
but it is irrelevant for matching constraints. */
- if (GET_RTX_CLASS (GET_CODE (op1)) == '1')
+ if (UNARY_P (op1))
op1 = XEXP (op1, 0);
- if (GET_RTX_CLASS (GET_CODE (op2)) == '1')
+ if (UNARY_P (op2))
op2 = XEXP (op2, 0);
val = operands_match_p (op1, op2);
break;
/* No need to check general_operand again;
- it was done in insn-recog.c. */
+ it was done in insn-recog.c. Well, except that reload
+ doesn't check the validity of its replacements, but
+ that should only matter when there's a bug. */
case 'g':
/* Anything goes unless it is a REG and really has a hard reg
but the hard reg is not in the class GENERAL_REGS. */
- if (strict < 0
- || GENERAL_REGS == ALL_REGS
- || GET_CODE (op) != REG
- || (reload_in_progress
- && REGNO (op) >= FIRST_PSEUDO_REGISTER)
- || reg_fits_class_p (op, GENERAL_REGS, offset, mode))
+ if (REG_P (op))
+ {
+ if (strict < 0
+ || GENERAL_REGS == ALL_REGS
+ || (reload_in_progress
+ && REGNO (op) >= FIRST_PSEUDO_REGISTER)
+ || reg_fits_class_p (op, GENERAL_REGS, offset, mode))
+ win = 1;
+ }
+ else if (strict < 0 || general_operand (op, mode))
win = 1;
break;
break;
case 'm':
- if (GET_CODE (op) == MEM
- /* Before reload, accept what reload can turn into mem. */
- || (strict < 0 && CONSTANT_P (op))
- /* During reload, accept a pseudo */
- || (reload_in_progress && GET_CODE (op) == REG
- && REGNO (op) >= FIRST_PSEUDO_REGISTER))
+ /* Memory operands must be valid, to the extent
+ required by STRICT. */
+ if (MEM_P (op))
+ {
+ if (strict > 0
+ && !strict_memory_address_p (GET_MODE (op),
+ XEXP (op, 0)))
+ break;
+ if (strict == 0
+ && !memory_address_p (GET_MODE (op), XEXP (op, 0)))
+ break;
+ win = 1;
+ }
+ /* Before reload, accept what reload can turn into mem. */
+ else if (strict < 0 && CONSTANT_P (op))
+ win = 1;
+ /* During reload, accept a pseudo */
+ else if (reload_in_progress && REG_P (op)
+ && REGNO (op) >= FIRST_PSEUDO_REGISTER)
win = 1;
break;
case '<':
- if (GET_CODE (op) == MEM
+ if (MEM_P (op)
&& (GET_CODE (XEXP (op, 0)) == PRE_DEC
|| GET_CODE (XEXP (op, 0)) == POST_DEC))
win = 1;
break;
case '>':
- if (GET_CODE (op) == MEM
+ if (MEM_P (op)
&& (GET_CODE (XEXP (op, 0)) == PRE_INC
|| GET_CODE (XEXP (op, 0)) == POST_INC))
win = 1;
break;
case 'V':
- if (GET_CODE (op) == MEM
+ if (MEM_P (op)
&& ((strict > 0 && ! offsettable_memref_p (op))
|| (strict < 0
- && !(CONSTANT_P (op) || GET_CODE (op) == MEM))
+ && !(CONSTANT_P (op) || MEM_P (op)))
|| (reload_in_progress
- && !(GET_CODE (op) == REG
+ && !(REG_P (op)
&& REGNO (op) >= FIRST_PSEUDO_REGISTER))))
win = 1;
break;
|| (strict == 0 && offsettable_nonstrict_memref_p (op))
/* Before reload, accept what reload can handle. */
|| (strict < 0
- && (CONSTANT_P (op) || GET_CODE (op) == MEM))
+ && (CONSTANT_P (op) || MEM_P (op)))
/* During reload, accept a pseudo */
- || (reload_in_progress && GET_CODE (op) == REG
+ || (reload_in_progress && REG_P (op)
&& REGNO (op) >= FIRST_PSEUDO_REGISTER))
win = 1;
break;
default:
{
- enum reg_class class;
+ enum reg_class cl;
- class = (c == 'r'
+ cl = (c == 'r'
? GENERAL_REGS : REG_CLASS_FROM_CONSTRAINT (c, p));
- if (class != NO_REGS)
+ if (cl != NO_REGS)
{
if (strict < 0
|| (strict == 0
- && GET_CODE (op) == REG
+ && REG_P (op)
&& REGNO (op) >= FIRST_PSEUDO_REGISTER)
|| (strict == 0 && GET_CODE (op) == SCRATCH)
- || (GET_CODE (op) == REG
- && reg_fits_class_p (op, class, offset, mode)))
+ || (REG_P (op)
+ && reg_fits_class_p (op, cl, offset, mode)))
win = 1;
}
#ifdef EXTRA_CONSTRAINT_STR
else if (EXTRA_CONSTRAINT_STR (op, c, p))
win = 1;
- if (EXTRA_MEMORY_CONSTRAINT (c, p))
- {
- /* Every memory operand can be reloaded to fit. */
- if (strict < 0 && GET_CODE (op) == MEM)
- win = 1;
-
- /* Before reload, accept what reload can turn into mem. */
- if (strict < 0 && CONSTANT_P (op))
- win = 1;
-
- /* During reload, accept a pseudo */
- if (reload_in_progress && GET_CODE (op) == REG
- && REGNO (op) >= FIRST_PSEUDO_REGISTER)
- win = 1;
- }
- if (EXTRA_ADDRESS_CONSTRAINT (c, p))
- {
- /* Every address operand can be reloaded to fit. */
- if (strict < 0)
- win = 1;
- }
+ else if (EXTRA_MEMORY_CONSTRAINT (c, p)
+ /* Every memory operand can be reloaded to fit. */
+ && ((strict < 0 && MEM_P (op))
+ /* Before reload, accept what reload can turn
+ into mem. */
+ || (strict < 0 && CONSTANT_P (op))
+ /* During reload, accept a pseudo */
+ || (reload_in_progress && REG_P (op)
+ && REGNO (op) >= FIRST_PSEUDO_REGISTER)))
+ win = 1;
+ else if (EXTRA_ADDRESS_CONSTRAINT (c, p)
+ /* Every address operand can be reloaded to fit. */
+ && strict < 0)
+ win = 1;
#endif
break;
}
/* See if any earlyclobber operand conflicts with some other
operand. */
- if (strict > 0)
- for (eopno = 0; eopno < recog_data.n_operands; eopno++)
+ if (strict > 0 && seen_earlyclobber_at >= 0)
+ for (eopno = seen_earlyclobber_at;
+ eopno < recog_data.n_operands;
+ eopno++)
/* Ignore earlyclobber operands now in memory,
because we would often report failure when we have
two memory operands, one of which was formerly a REG. */
if (earlyclobber[eopno]
- && GET_CODE (recog_data.operand[eopno]) == REG)
+ && REG_P (recog_data.operand[eopno]))
for (opno = 0; opno < recog_data.n_operands; opno++)
- if ((GET_CODE (recog_data.operand[opno]) == MEM
+ if ((MEM_P (recog_data.operand[opno])
|| recog_data.operand_type[opno] != OP_OUT)
&& opno != eopno
/* Ignore things like match_operator operands. */
If REG occupies multiple hard regs, all of them must be in CLASS. */
int
-reg_fits_class_p (operand, class, offset, mode)
- rtx operand;
- enum reg_class class;
- int offset;
- enum machine_mode mode;
+reg_fits_class_p (rtx operand, enum reg_class cl, int offset,
+ enum machine_mode mode)
{
int regno = REGNO (operand);
if (regno < FIRST_PSEUDO_REGISTER
- && TEST_HARD_REG_BIT (reg_class_contents[(int) class],
+ && TEST_HARD_REG_BIT (reg_class_contents[(int) cl],
regno + offset))
{
int sr;
regno += offset;
- for (sr = HARD_REGNO_NREGS (regno, mode) - 1;
+ for (sr = hard_regno_nregs[regno][mode] - 1;
sr > 0; sr--)
- if (! TEST_HARD_REG_BIT (reg_class_contents[(int) class],
+ if (! TEST_HARD_REG_BIT (reg_class_contents[(int) cl],
regno + sr))
break;
return sr == 0;
return 0;
}
\f
-/* Split single instruction. Helper function for split_all_insns.
- Return last insn in the sequence if successful, or NULL if unsuccessful. */
+/* Split single instruction. Helper function for split_all_insns and
+ split_all_insns_noflow. Return last insn in the sequence if successful,
+ or NULL if unsuccessful. */
+
static rtx
-split_insn (insn)
- rtx insn;
+split_insn (rtx insn)
{
- rtx set;
- if (!INSN_P (insn))
- ;
- /* Don't split no-op move insns. These should silently
- disappear later in final. Splitting such insns would
- break the code that handles REG_NO_CONFLICT blocks. */
+ /* Split insns here to get max fine-grain parallelism. */
+ rtx first = PREV_INSN (insn);
+ rtx last = try_split (PATTERN (insn), insn, 1);
- else if ((set = single_set (insn)) != NULL && set_noop_p (set))
- {
- /* Nops get in the way while scheduling, so delete them
- now if register allocation has already been done. It
- is too risky to try to do this before register
- allocation, and there are unlikely to be very many
- nops then anyways. */
- if (reload_completed)
- delete_insn_and_edges (insn);
- }
- else
- {
- /* Split insns here to get max fine-grain parallelism. */
- rtx first = PREV_INSN (insn);
- rtx last = try_split (PATTERN (insn), insn, 1);
+ if (last == insn)
+ return NULL_RTX;
+
+ /* try_split returns the NOTE that INSN became. */
+ SET_INSN_DELETED (insn);
- if (last != insn)
+ /* ??? Coddle to md files that generate subregs in post-reload
+ splitters instead of computing the proper hard register. */
+ if (reload_completed && first != last)
+ {
+ first = NEXT_INSN (first);
+ for (;;)
{
- /* try_split returns the NOTE that INSN became. */
- PUT_CODE (insn, NOTE);
- NOTE_SOURCE_FILE (insn) = 0;
- NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED;
-
- /* ??? Coddle to md files that generate subregs in post-
- reload splitters instead of computing the proper
- hard register. */
- if (reload_completed && first != last)
- {
- first = NEXT_INSN (first);
- while (1)
- {
- if (INSN_P (first))
- cleanup_subreg_operands (first);
- if (first == last)
- break;
- first = NEXT_INSN (first);
- }
- }
- return last;
+ if (INSN_P (first))
+ cleanup_subreg_operands (first);
+ if (first == last)
+ break;
+ first = NEXT_INSN (first);
}
}
- return NULL_RTX;
+ return last;
}
+
/* Split all insns in the function. If UPD_LIFE, update life info after. */
void
-split_all_insns (upd_life)
- int upd_life;
+split_all_insns (int upd_life)
{
sbitmap blocks;
bool changed;
rtx insn, next;
bool finish = false;
- for (insn = bb->head; !finish ; insn = next)
+ for (insn = BB_HEAD (bb); !finish ; insn = next)
{
- rtx last;
-
/* Can't use `next_real_insn' because that might go across
CODE_LABELS and short-out basic blocks. */
next = NEXT_INSN (insn);
- finish = (insn == bb->end);
- last = split_insn (insn);
- if (last)
+ finish = (insn == BB_END (bb));
+ if (INSN_P (insn))
{
- /* The split sequence may include barrier, but the
- BB boundary we are interested in will be set to previous
- one. */
-
- while (GET_CODE (last) == BARRIER)
- last = PREV_INSN (last);
- SET_BIT (blocks, bb->index);
- changed = true;
- insn = last;
+ rtx set = single_set (insn);
+
+ /* Don't split no-op move insns. These should silently
+ disappear later in final. Splitting such insns would
+ break the code that handles REG_NO_CONFLICT blocks. */
+ if (set && set_noop_p (set))
+ {
+ /* Nops get in the way while scheduling, so delete them
+ now if register allocation has already been done. It
+ is too risky to try to do this before register
+ allocation, and there are unlikely to be very many
+ nops then anyways. */
+ if (reload_completed)
+ {
+ /* If the no-op set has a REG_UNUSED note, we need
+ to update liveness information. */
+ if (find_reg_note (insn, REG_UNUSED, NULL_RTX))
+ {
+ SET_BIT (blocks, bb->index);
+ changed = true;
+ }
+ /* ??? Is life info affected by deleting edges? */
+ delete_insn_and_edges (insn);
+ }
+ }
+ else
+ {
+ rtx last = split_insn (insn);
+ if (last)
+ {
+ /* The split sequence may include barrier, but the
+ BB boundary we are interested in will be set to
+ previous one. */
+
+ while (BARRIER_P (last))
+ last = PREV_INSN (last);
+ SET_BIT (blocks, bb->index);
+ changed = true;
+ }
+ }
}
}
}
find_many_sub_basic_blocks (blocks);
if (old_last_basic_block != last_basic_block && upd_life)
- {
- sbitmap new_blocks = sbitmap_alloc (last_basic_block);
-
- sbitmap_copy (new_blocks, blocks);
- while (old_last_basic_block < last_basic_block)
- {
- SET_BIT (new_blocks, old_last_basic_block);
- old_last_basic_block++;
- }
- sbitmap_free (blocks);
- new_blocks = blocks;
- }
+ blocks = sbitmap_resize (blocks, last_basic_block, 1);
}
if (changed && upd_life)
update_life_info (blocks, UPDATE_LIFE_GLOBAL_RM_NOTES,
- PROP_DEATH_NOTES | PROP_REG_INFO);
+ PROP_DEATH_NOTES);
#ifdef ENABLE_CHECKING
verify_flow_info ();
Used by machine dependent reorg passes. */
void
-split_all_insns_noflow ()
+split_all_insns_noflow (void)
{
rtx next, insn;
for (insn = get_insns (); insn; insn = next)
{
next = NEXT_INSN (insn);
- split_insn (insn);
+ if (INSN_P (insn))
+ {
+ /* Don't split no-op move insns. These should silently
+ disappear later in final. Splitting such insns would
+ break the code that handles REG_NO_CONFLICT blocks. */
+ rtx set = single_set (insn);
+ if (set && set_noop_p (set))
+ {
+ /* Nops get in the way while scheduling, so delete them
+ now if register allocation has already been done. It
+ is too risky to try to do this before register
+ allocation, and there are unlikely to be very many
+ nops then anyways.
+
+ ??? Should we use delete_insn when the CFG isn't valid? */
+ if (reload_completed)
+ delete_insn_and_edges (insn);
+ }
+ else
+ split_insn (insn);
+ }
}
- return;
}
\f
#ifdef HAVE_peephole2
static struct peep2_insn_data peep2_insn_data[MAX_INSNS_PER_PEEP2 + 1];
static int peep2_current;
+/* The number of instructions available to match a peep2. */
+int peep2_current_count;
/* A non-insn marker indicating the last insn of the block.
The live_before regset for this element is correct, indicating
in a multi-insn pattern. */
rtx
-peep2_next_insn (n)
- int n;
+peep2_next_insn (int n)
{
- if (n >= MAX_INSNS_PER_PEEP2 + 1)
- abort ();
+ gcc_assert (n <= peep2_current_count);
n += peep2_current;
if (n >= MAX_INSNS_PER_PEEP2 + 1)
n -= MAX_INSNS_PER_PEEP2 + 1;
- if (peep2_insn_data[n].insn == PEEP2_EOB)
- return NULL_RTX;
return peep2_insn_data[n].insn;
}
after `current'. */
int
-peep2_regno_dead_p (ofs, regno)
- int ofs;
- int regno;
+peep2_regno_dead_p (int ofs, int regno)
{
- if (ofs >= MAX_INSNS_PER_PEEP2 + 1)
- abort ();
+ gcc_assert (ofs < MAX_INSNS_PER_PEEP2 + 1);
ofs += peep2_current;
if (ofs >= MAX_INSNS_PER_PEEP2 + 1)
ofs -= MAX_INSNS_PER_PEEP2 + 1;
- if (peep2_insn_data[ofs].insn == NULL_RTX)
- abort ();
+ gcc_assert (peep2_insn_data[ofs].insn != NULL_RTX);
return ! REGNO_REG_SET_P (peep2_insn_data[ofs].live_before, regno);
}
/* Similarly for a REG. */
int
-peep2_reg_dead_p (ofs, reg)
- int ofs;
- rtx reg;
+peep2_reg_dead_p (int ofs, rtx reg)
{
int regno, n;
- if (ofs >= MAX_INSNS_PER_PEEP2 + 1)
- abort ();
+ gcc_assert (ofs < MAX_INSNS_PER_PEEP2 + 1);
ofs += peep2_current;
if (ofs >= MAX_INSNS_PER_PEEP2 + 1)
ofs -= MAX_INSNS_PER_PEEP2 + 1;
- if (peep2_insn_data[ofs].insn == NULL_RTX)
- abort ();
+ gcc_assert (peep2_insn_data[ofs].insn != NULL_RTX);
regno = REGNO (reg);
- n = HARD_REGNO_NREGS (regno, GET_MODE (reg));
+ n = hard_regno_nregs[regno][GET_MODE (reg)];
while (--n >= 0)
if (REGNO_REG_SET_P (peep2_insn_data[ofs].live_before, regno + n))
return 0;
returned. */
rtx
-peep2_find_free_register (from, to, class_str, mode, reg_set)
- int from, to;
- const char *class_str;
- enum machine_mode mode;
- HARD_REG_SET *reg_set;
+peep2_find_free_register (int from, int to, const char *class_str,
+ enum machine_mode mode, HARD_REG_SET *reg_set)
{
static int search_ofs;
- enum reg_class class;
+ enum reg_class cl;
HARD_REG_SET live;
int i;
- if (from >= MAX_INSNS_PER_PEEP2 + 1 || to >= MAX_INSNS_PER_PEEP2 + 1)
- abort ();
+ gcc_assert (from < MAX_INSNS_PER_PEEP2 + 1);
+ gcc_assert (to < MAX_INSNS_PER_PEEP2 + 1);
from += peep2_current;
if (from >= MAX_INSNS_PER_PEEP2 + 1)
if (to >= MAX_INSNS_PER_PEEP2 + 1)
to -= MAX_INSNS_PER_PEEP2 + 1;
- if (peep2_insn_data[from].insn == NULL_RTX)
- abort ();
+ gcc_assert (peep2_insn_data[from].insn != NULL_RTX);
REG_SET_TO_HARD_REG_SET (live, peep2_insn_data[from].live_before);
while (from != to)
if (++from >= MAX_INSNS_PER_PEEP2 + 1)
from = 0;
- if (peep2_insn_data[from].insn == NULL_RTX)
- abort ();
+ gcc_assert (peep2_insn_data[from].insn != NULL_RTX);
REG_SET_TO_HARD_REG_SET (this_live, peep2_insn_data[from].live_before);
IOR_HARD_REG_SET (live, this_live);
}
- class = (class_str[0] == 'r' ? GENERAL_REGS
+ cl = (class_str[0] == 'r' ? GENERAL_REGS
: REG_CLASS_FROM_CONSTRAINT (class_str[0], class_str));
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
if (fixed_regs[regno])
continue;
/* Make sure the register is of the right class. */
- if (! TEST_HARD_REG_BIT (reg_class_contents[class], regno))
+ if (! TEST_HARD_REG_BIT (reg_class_contents[cl], regno))
continue;
/* And can support the mode we need. */
if (! HARD_REGNO_MODE_OK (regno, mode))
continue;
success = 1;
- for (j = HARD_REGNO_NREGS (regno, mode) - 1; j >= 0; j--)
+ for (j = hard_regno_nregs[regno][mode] - 1; j >= 0; j--)
{
if (TEST_HARD_REG_BIT (*reg_set, regno + j)
|| TEST_HARD_REG_BIT (live, regno + j))
}
if (success)
{
- for (j = HARD_REGNO_NREGS (regno, mode) - 1; j >= 0; j--)
+ for (j = hard_regno_nregs[regno][mode] - 1; j >= 0; j--)
SET_HARD_REG_BIT (*reg_set, regno + j);
/* Start the next search with the next register. */
/* Perform the peephole2 optimization pass. */
void
-peephole2_optimize (dump_file)
- FILE *dump_file ATTRIBUTE_UNUSED;
+peephole2_optimize (FILE *dump_file ATTRIBUTE_UNUSED)
{
- regset_head rs_heads[MAX_INSNS_PER_PEEP2 + 2];
rtx insn, prev;
regset live;
int i;
bool changed;
#endif
bool do_cleanup_cfg = false;
+ bool do_global_life_update = false;
bool do_rebuild_jump_labels = false;
/* Initialize the regsets we're going to use. */
for (i = 0; i < MAX_INSNS_PER_PEEP2 + 1; ++i)
- peep2_insn_data[i].live_before = INITIALIZE_REG_SET (rs_heads[i]);
- live = INITIALIZE_REG_SET (rs_heads[i]);
+ peep2_insn_data[i].live_before = ALLOC_REG_SET (®_obstack);
+ live = ALLOC_REG_SET (®_obstack);
#ifdef HAVE_conditional_execution
blocks = sbitmap_alloc (last_basic_block);
FOR_EACH_BB_REVERSE (bb)
{
struct propagate_block_info *pbi;
+ reg_set_iterator rsi;
+ unsigned int j;
/* Indicate that all slots except the last holds invalid data. */
for (i = 0; i < MAX_INSNS_PER_PEEP2; ++i)
peep2_insn_data[i].insn = NULL_RTX;
+ peep2_current_count = 0;
/* Indicate that the last slot contains live_after data. */
peep2_insn_data[MAX_INSNS_PER_PEEP2].insn = PEEP2_EOB;
peep2_current = MAX_INSNS_PER_PEEP2;
/* Start up propagation. */
- COPY_REG_SET (live, bb->global_live_at_end);
+ COPY_REG_SET (live, bb->il.rtl->global_live_at_end);
COPY_REG_SET (peep2_insn_data[MAX_INSNS_PER_PEEP2].live_before, live);
#ifdef HAVE_conditional_execution
pbi = init_propagate_block_info (bb, live, NULL, NULL, PROP_DEATH_NOTES);
#endif
- for (insn = bb->end; ; insn = prev)
+ for (insn = BB_END (bb); ; insn = prev)
{
prev = PREV_INSN (insn);
if (INSN_P (insn))
/* Record this insn. */
if (--peep2_current < 0)
peep2_current = MAX_INSNS_PER_PEEP2;
+ if (peep2_current_count < MAX_INSNS_PER_PEEP2
+ && peep2_insn_data[peep2_current].insn == NULL_RTX)
+ peep2_current_count++;
peep2_insn_data[peep2_current].insn = insn;
propagate_one_insn (pbi, insn);
COPY_REG_SET (peep2_insn_data[peep2_current].live_before, live);
- /* Match the peephole. */
- try = peephole2_insns (PATTERN (insn), insn, &match_len);
+ if (RTX_FRAME_RELATED_P (insn))
+ {
+ /* If an insn has RTX_FRAME_RELATED_P set, peephole
+ substitution would lose the
+ REG_FRAME_RELATED_EXPR that is attached. */
+ peep2_current_count = 0;
+ try = NULL;
+ }
+ else
+ /* Match the peephole. */
+ try = peephole2_insns (PATTERN (insn), insn, &match_len);
+
if (try != NULL)
{
/* If we are splitting a CALL_INSN, look for the CALL_INSN
if (j >= MAX_INSNS_PER_PEEP2 + 1)
j -= MAX_INSNS_PER_PEEP2 + 1;
old_insn = peep2_insn_data[j].insn;
- if (GET_CODE (old_insn) != CALL_INSN)
+ if (!CALL_P (old_insn))
continue;
was_call = true;
new_insn = try;
while (new_insn != NULL_RTX)
{
- if (GET_CODE (new_insn) == CALL_INSN)
+ if (CALL_P (new_insn))
break;
new_insn = NEXT_INSN (new_insn);
}
- if (new_insn == NULL_RTX)
- abort ();
+ gcc_assert (new_insn != NULL_RTX);
CALL_INSN_FUNCTION_USAGE (new_insn)
= CALL_INSN_FUNCTION_USAGE (old_insn);
{
case REG_NORETURN:
case REG_SETJMP:
- case REG_ALWAYS_RETURN:
REG_NOTES (new_insn)
= gen_rtx_EXPR_LIST (REG_NOTE_KIND (note),
XEXP (note, 0),
if (j >= MAX_INSNS_PER_PEEP2 + 1)
j -= MAX_INSNS_PER_PEEP2 + 1;
old_insn = peep2_insn_data[j].insn;
- if (GET_CODE (old_insn) == CALL_INSN)
- abort ();
+ gcc_assert (!CALL_P (old_insn));
}
break;
}
REG_EH_REGION, NULL_RTX);
/* Replace the old sequence with the new. */
- try = emit_insn_after_scope (try, peep2_insn_data[i].insn,
- INSN_SCOPE (peep2_insn_data[i].insn));
+ try = emit_insn_after_setloc (try, peep2_insn_data[i].insn,
+ INSN_LOCATOR (peep2_insn_data[i].insn));
before_try = PREV_INSN (insn);
delete_insn_chain (insn, peep2_insn_data[i].insn);
if (note || (was_call && nonlocal_goto_handler_labels))
{
edge eh_edge;
+ edge_iterator ei;
- for (eh_edge = bb->succ; eh_edge
- ; eh_edge = eh_edge->succ_next)
+ FOR_EACH_EDGE (eh_edge, ei, bb->succs)
if (eh_edge->flags & (EDGE_EH | EDGE_ABNORMAL_CALL))
break;
for (x = try ; x != before_try ; x = PREV_INSN (x))
- if (GET_CODE (x) == CALL_INSN
+ if (CALL_P (x)
|| (flag_non_call_exceptions
&& may_trap_p (PATTERN (x))
&& !find_reg_note (x, REG_EH_REGION, NULL)))
XEXP (note, 0),
REG_NOTES (x));
- if (x != bb->end && eh_edge)
+ if (x != BB_END (bb) && eh_edge)
{
edge nfte, nehe;
int flags;
nfte = split_block (bb, x);
flags = (eh_edge->flags
& (EDGE_EH | EDGE_ABNORMAL));
- if (GET_CODE (x) == CALL_INSN)
+ if (CALL_P (x))
flags |= EDGE_ABNORMAL_CALL;
nehe = make_edge (nfte->src, eh_edge->dest,
flags);
for (i = 0; i < MAX_INSNS_PER_PEEP2 + 1; ++i)
peep2_insn_data[i].insn = NULL_RTX;
peep2_insn_data[peep2_current].insn = PEEP2_EOB;
+ peep2_current_count = 0;
#else
/* Back up lifetime information past the end of the
newly created sequence. */
{
if (--i < 0)
i = MAX_INSNS_PER_PEEP2;
+ if (peep2_current_count < MAX_INSNS_PER_PEEP2
+ && peep2_insn_data[i].insn == NULL_RTX)
+ peep2_current_count++;
peep2_insn_data[i].insn = x;
propagate_one_insn (pbi, x);
COPY_REG_SET (peep2_insn_data[i].live_before, live);
/* If we generated a jump instruction, it won't have
JUMP_LABEL set. Recompute after we're done. */
for (x = try; x != before_try; x = PREV_INSN (x))
- if (GET_CODE (x) == JUMP_INSN)
+ if (JUMP_P (x))
{
do_rebuild_jump_labels = true;
break;
}
}
- if (insn == bb->head)
+ if (insn == BB_HEAD (bb))
break;
}
+ /* Some peepholes can decide the don't need one or more of their
+ inputs. If this happens, local life update is not enough. */
+ EXECUTE_IF_AND_COMPL_IN_BITMAP (bb->il.rtl->global_live_at_start, live,
+ 0, j, rsi)
+ {
+ do_global_life_update = true;
+ break;
+ }
+
free_propagate_block_info (pbi);
}
if (do_cleanup_cfg)
{
cleanup_cfg (0);
- update_life_info (0, UPDATE_LIFE_GLOBAL_RM_NOTES, PROP_DEATH_NOTES);
+ do_global_life_update = true;
}
+ if (do_global_life_update)
+ update_life_info (0, UPDATE_LIFE_GLOBAL_RM_NOTES, PROP_DEATH_NOTES);
#ifdef HAVE_conditional_execution
else
{
SETs inside. */
int
-store_data_bypass_p (out_insn, in_insn)
- rtx out_insn, in_insn;
+store_data_bypass_p (rtx out_insn, rtx in_insn)
{
rtx out_set, in_set;
in_set = single_set (in_insn);
- if (! in_set)
- abort ();
+ gcc_assert (in_set);
- if (GET_CODE (SET_DEST (in_set)) != MEM)
+ if (!MEM_P (SET_DEST (in_set)))
return false;
out_set = single_set (out_insn);
int i;
out_pat = PATTERN (out_insn);
- if (GET_CODE (out_pat) != PARALLEL)
- abort ();
+ gcc_assert (GET_CODE (out_pat) == PARALLEL);
for (i = 0; i < XVECLEN (out_pat, 0); i++)
{
if (GET_CODE (exp) == CLOBBER)
continue;
- if (GET_CODE (exp) != SET)
- abort ();
+ gcc_assert (GET_CODE (exp) == SET);
if (reg_mentioned_p (SET_DEST (exp), SET_DEST (in_set)))
return false;
of insn categorization may be any JUMP or CALL insn. */
int
-if_test_bypass_p (out_insn, in_insn)
- rtx out_insn, in_insn;
+if_test_bypass_p (rtx out_insn, rtx in_insn)
{
rtx out_set, in_set;
in_set = single_set (in_insn);
if (! in_set)
{
- if (GET_CODE (in_insn) == JUMP_INSN || GET_CODE (in_insn) == CALL_INSN)
- return false;
- abort ();
+ gcc_assert (JUMP_P (in_insn) || CALL_P (in_insn));
+ return false;
}
if (GET_CODE (SET_SRC (in_set)) != IF_THEN_ELSE)
int i;
out_pat = PATTERN (out_insn);
- if (GET_CODE (out_pat) != PARALLEL)
- abort ();
+ gcc_assert (GET_CODE (out_pat) == PARALLEL);
for (i = 0; i < XVECLEN (out_pat, 0); i++)
{
if (GET_CODE (exp) == CLOBBER)
continue;
- if (GET_CODE (exp) != SET)
- abort ();
+ gcc_assert (GET_CODE (exp) == SET);
if (reg_mentioned_p (SET_DEST (out_set), XEXP (in_set, 1))
|| reg_mentioned_p (SET_DEST (out_set), XEXP (in_set, 2)))
return true;
}
+\f
+static bool
+gate_handle_peephole2 (void)
+{
+ return (optimize > 0 && flag_peephole2);
+}
+
+static void
+rest_of_handle_peephole2 (void)
+{
+#ifdef HAVE_peephole2
+ peephole2_optimize (dump_file);
+#endif
+}
+
+struct tree_opt_pass pass_peephole2 =
+{
+ "peephole2", /* name */
+ gate_handle_peephole2, /* gate */
+ rest_of_handle_peephole2, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ TV_PEEPHOLE2, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ TODO_dump_func, /* todo_flags_finish */
+ 'z' /* letter */
+};
+
+static void
+rest_of_handle_split_all_insns (void)
+{
+ split_all_insns (1);
+}
+
+struct tree_opt_pass pass_split_all_insns =
+{
+ "split1", /* name */
+ NULL, /* gate */
+ rest_of_handle_split_all_insns, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ 0, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ TODO_dump_func, /* todo_flags_finish */
+ 0 /* letter */
+};
+
+/* The placement of the splitting that we do for shorten_branches
+ depends on whether regstack is used by the target or not. */
+static bool
+gate_do_final_split (void)
+{
+#if defined (HAVE_ATTR_length) && !defined (STACK_REGS)
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+struct tree_opt_pass pass_split_for_shorten_branches =
+{
+ "split3", /* name */
+ gate_do_final_split, /* gate */
+ split_all_insns_noflow, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ TV_SHORTEN_BRANCH, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ TODO_dump_func, /* todo_flags_finish */
+ 0 /* letter */
+};
+
+
+static bool
+gate_handle_split_before_regstack (void)
+{
+#if defined (HAVE_ATTR_length) && defined (STACK_REGS)
+ /* If flow2 creates new instructions which need splitting
+ and scheduling after reload is not done, they might not be
+ split until final which doesn't allow splitting
+ if HAVE_ATTR_length. */
+# ifdef INSN_SCHEDULING
+ return (optimize && !flag_schedule_insns_after_reload);
+# else
+ return (optimize);
+# endif
+#else
+ return 0;
+#endif
+}
+
+struct tree_opt_pass pass_split_before_regstack =
+{
+ "split2", /* name */
+ gate_handle_split_before_regstack, /* gate */
+ rest_of_handle_split_all_insns, /* execute */
+ NULL, /* sub */
+ NULL, /* next */
+ 0, /* static_pass_number */
+ TV_SHORTEN_BRANCH, /* tv_id */
+ 0, /* properties_required */
+ 0, /* properties_provided */
+ 0, /* properties_destroyed */
+ 0, /* todo_flags_start */
+ TODO_dump_func, /* todo_flags_finish */
+ 0 /* letter */
+};
OSDN Git Service
