02111-1307, USA. */
/* This program handles insn attributes and the DEFINE_DELAY and
- DEFINE_FUNCTION_UNIT definitions.
+ DEFINE_INSN_RESERVATION definitions.
It produces a series of functions named `get_attr_...', one for each insn
attribute. Each of these is given the rtx for an insn and returns a member
used.
Internal attributes are defined to handle DEFINE_DELAY and
- DEFINE_FUNCTION_UNIT. Special routines are output for these cases.
+ DEFINE_INSN_RESERVATION. Special routines are output for these cases.
This program works by keeping a list of possible values for each attribute.
These include the basic attribute choices, default values for attribute, and
indicates when the attribute has the specified value for the insn. This
avoids recursive calls during compilation.
- The strategy used when processing DEFINE_DELAY and DEFINE_FUNCTION_UNIT
- definitions is to create arbitrarily complex expressions and have the
- optimization simplify them.
+ The strategy used when processing DEFINE_DELAY definitions is to create
+ arbitrarily complex expressions and have the optimization simplify them.
Once optimization is complete, any required routines and definitions
will be written.
#if 0
#define strcmp_check(S1, S2) ((S1) == (S2) \
? 0 \
- : (strcmp ((S1), (S2)) \
- ? 1 \
- : (abort (), 0)))
+ : (gcc_assert (strcmp ((S1), (S2))), 1))
#else
#define strcmp_check(S1, S2) ((S1) != (S2))
#endif
struct insn_ent
{
struct insn_ent *next; /* Next in chain. */
- int insn_code; /* Instruction number. */
- int insn_index; /* Index of definition in file */
- int lineno; /* Line number. */
+ struct insn_def *def; /* Instruction definition. */
};
/* Each value of an attribute (either constant or computed) is assigned a
unsigned unsigned_p : 1; /* Make the output function unsigned int. */
unsigned is_const : 1; /* Attribute value constant for each run. */
unsigned is_special : 1; /* Don't call `write_attr_set'. */
- unsigned func_units_p : 1; /* This is the function_units attribute. */
- unsigned blockage_p : 1; /* This is the blockage range function. */
unsigned static_p : 1; /* Make the output function static. */
};
#define NULL_ATTR (struct attr_desc *) NULL
-/* A range of values. */
-
-struct range
-{
- int min;
- int max;
-};
-
/* Structure for each DEFINE_DELAY. */
struct delay_desc
int lineno; /* Line number. */
};
-/* Record information about each DEFINE_FUNCTION_UNIT. */
-
-struct function_unit_op
-{
- rtx condexp; /* Expression TRUE for applicable insn. */
- struct function_unit_op *next; /* Next operation for this function unit. */
- int num; /* Ordinal for this operation type in unit. */
- int ready; /* Cost until data is ready. */
- int issue_delay; /* Cost until unit can accept another insn. */
- rtx conflict_exp; /* Expression TRUE for insns incurring issue delay. */
- rtx issue_exp; /* Expression computing issue delay. */
- int lineno; /* Line number. */
-};
-
-/* Record information about each function unit mentioned in a
- DEFINE_FUNCTION_UNIT. */
-
-struct function_unit
-{
- const char *name; /* Function unit name. */
- struct function_unit *next; /* Next function unit. */
- int num; /* Ordinal of this unit type. */
- int multiplicity; /* Number of units of this type. */
- int simultaneity; /* Maximum number of simultaneous insns
- on this function unit or 0 if unlimited. */
- rtx condexp; /* Expression TRUE for insn needing unit. */
- int num_opclasses; /* Number of different operation types. */
- struct function_unit_op *ops; /* Pointer to first operation type. */
- int needs_conflict_function; /* Nonzero if a conflict function required. */
- int needs_blockage_function; /* Nonzero if a blockage function required. */
- int needs_range_function; /* Nonzero if blockage range function needed. */
- rtx default_cost; /* Conflict cost, if constant. */
- struct range issue_delay; /* Range of issue delay values. */
- int max_blockage; /* Maximum time an insn blocks the unit. */
- int first_lineno; /* First seen line number. */
-};
-
/* Listheads of above structures. */
/* This one is indexed by the first character of the attribute name. */
static struct attr_desc *attrs[MAX_ATTRS_INDEX];
static struct insn_def *defs;
static struct delay_desc *delays;
-static struct function_unit *units;
-
-/* An expression where all the unknown terms are EQ_ATTR tests can be
- rearranged into a COND provided we can enumerate all possible
- combinations of the unknown values. The set of combinations become the
- tests of the COND; the value of the expression given that combination is
- computed and becomes the corresponding value. To do this, we must be
- able to enumerate all values for each attribute used in the expression
- (currently, we give up if we find a numeric attribute).
-
- If the set of EQ_ATTR tests used in an expression tests the value of N
- different attributes, the list of all possible combinations can be made
- by walking the N-dimensional attribute space defined by those
- attributes. We record each of these as a struct dimension.
-
- The algorithm relies on sharing EQ_ATTR nodes: if two nodes in an
- expression are the same, the will also have the same address. We find
- all the EQ_ATTR nodes by marking them ATTR_EQ_ATTR_P. This bit later
- represents the value of an EQ_ATTR node, so once all nodes are marked,
- they are also given an initial value of FALSE.
-
- We then separate the set of EQ_ATTR nodes into dimensions for each
- attribute and put them on the VALUES list. Terms are added as needed by
- `add_values_to_cover' so that all possible values of the attribute are
- tested.
-
- Each dimension also has a current value. This is the node that is
- currently considered to be TRUE. If this is one of the nodes added by
- `add_values_to_cover', all the EQ_ATTR tests in the original expression
- will be FALSE. Otherwise, only the CURRENT_VALUE will be true.
-
- NUM_VALUES is simply the length of the VALUES list and is there for
- convenience.
-
- Once the dimensions are created, the algorithm enumerates all possible
- values and computes the current value of the given expression. */
-
-struct dimension
-{
- struct attr_desc *attr; /* Attribute for this dimension. */
- rtx values; /* List of attribute values used. */
- rtx current_value; /* Position in the list for the TRUE value. */
- int num_values; /* Length of the values list. */
-};
/* Other variables. */
static int length_used;
static int num_delays;
static int have_annul_true, have_annul_false;
-static int num_units, num_unit_opclasses;
static int num_insn_ents;
int num_dfa_decls;
-/* Used as operand to `operate_exp': */
-
-enum operator {PLUS_OP, MINUS_OP, POS_MINUS_OP, EQ_OP, OR_OP, ORX_OP, MAX_OP, MIN_OP, RANGE_OP};
-
/* Stores, for each insn code, the number of constraint alternatives. */
static int *insn_n_alternatives;
static rtx copy_rtx_unchanging (rtx);
static rtx copy_boolean (rtx);
static void expand_delays (void);
-static rtx operate_exp (enum operator, rtx, rtx);
-static void expand_units (void);
-static rtx simplify_knowing (rtx, rtx);
-static rtx encode_units_mask (rtx);
static void fill_attr (struct attr_desc *);
static rtx substitute_address (rtx, rtx (*) (rtx), rtx (*) (rtx));
static void make_length_attrs (void);
static rtx max_fn (rtx);
static void write_length_unit_log (void);
static rtx simplify_cond (rtx, int, int);
-static rtx simplify_by_exploding (rtx);
-static int find_and_mark_used_attributes (rtx, rtx *, int *);
-static void unmark_used_attributes (rtx, struct dimension *, int);
-static int add_values_to_cover (struct dimension *);
-static int increment_current_value (struct dimension *, int);
-static rtx test_for_current_value (struct dimension *, int);
-static rtx simplify_with_current_value (rtx, struct dimension *, int);
-static rtx simplify_with_current_value_aux (rtx);
static void clear_struct_flag (rtx);
static void remove_insn_ent (struct attr_value *, struct insn_ent *);
static void insert_insn_ent (struct attr_value *, struct insn_ent *);
static int contained_in_p (rtx, rtx);
static void gen_insn (rtx, int);
static void gen_delay (rtx, int);
-static void gen_unit (rtx, int);
static void write_test_expr (rtx, int);
static int max_attr_value (rtx, int*);
static int or_attr_value (rtx, int*);
static void write_attr_set (struct attr_desc *, int, rtx,
const char *, const char *, rtx,
int, int);
+static void write_insn_cases (struct insn_ent *, int);
static void write_attr_case (struct attr_desc *, struct attr_value *,
int, const char *, const char *, int, rtx);
-static void write_unit_name (const char *, int, const char *);
static void write_attr_valueq (struct attr_desc *, const char *);
static void write_attr_value (struct attr_desc *, rtx);
static void write_upcase (const char *);
static void write_indent (int);
static void write_eligible_delay (const char *);
-static void write_function_unit_info (void);
-static void write_complex_function (struct function_unit *, const char *,
- const char *);
static int write_expr_attr_cache (rtx, struct attr_desc *);
-static void write_toplevel_expr (rtx);
static void write_const_num_delay_slots (void);
static char *next_comma_elt (const char **);
static struct attr_desc *find_attr (const char **, int);
static struct attr_value *find_most_used (struct attr_desc *);
-static rtx find_single_value (struct attr_desc *);
-static void extend_range (struct range *, int, int);
static rtx attr_eq (const char *, const char *);
static const char *attr_numeral (int);
static int attr_equal_p (rtx, rtx);
break;
default:
- abort ();
+ gcc_unreachable ();
}
}
return rt_val;
va_start (p, fmt);
- if (len > sizeof str - 1) /* Leave room for \0. */
- abort ();
+ gcc_assert (len < sizeof str); /* Leave room for \0. */
vsprintf (str, fmt, p);
va_end (p);
switch (code)
{
case REG:
- case QUEUED:
case CONST_INT:
case CONST_DOUBLE:
case CONST_VECTOR:
break;
default:
- abort ();
+ gcc_unreachable ();
}
}
return copy;
for (av = attr->first_value; av; av = av->next)
if (rtx_equal_p (value, av->value)
&& (num_alt == 0 || av->first_insn == NULL
- || insn_alternatives[av->first_insn->insn_code]))
+ || insn_alternatives[av->first_insn->def->insn_code]))
return av;
av = oballoc (sizeof (struct attr_value));
}
}
-/* This function is given a left and right side expression and an operator.
- Each side is a conditional expression, each alternative of which has a
- numerical value. The function returns another conditional expression
- which, for every possible set of condition values, returns a value that is
- the operator applied to the values of the two sides.
-
- Since this is called early, it must also support IF_THEN_ELSE. */
-
-static rtx
-operate_exp (enum operator op, rtx left, rtx right)
-{
- int left_value, right_value;
- rtx newexp;
- int i;
-
- /* If left is a string, apply operator to it and the right side. */
- if (GET_CODE (left) == CONST_STRING)
- {
- /* If right is also a string, just perform the operation. */
- if (GET_CODE (right) == CONST_STRING)
- {
- left_value = atoi (XSTR (left, 0));
- right_value = atoi (XSTR (right, 0));
- switch (op)
- {
- case PLUS_OP:
- i = left_value + right_value;
- break;
-
- case MINUS_OP:
- i = left_value - right_value;
- break;
-
- case POS_MINUS_OP: /* The positive part of LEFT - RIGHT. */
- if (left_value > right_value)
- i = left_value - right_value;
- else
- i = 0;
- break;
-
- case OR_OP:
- case ORX_OP:
- i = left_value | right_value;
- break;
-
- case EQ_OP:
- i = left_value == right_value;
- break;
-
- case RANGE_OP:
- i = (left_value << (HOST_BITS_PER_INT / 2)) | right_value;
- break;
-
- case MAX_OP:
- if (left_value > right_value)
- i = left_value;
- else
- i = right_value;
- break;
-
- case MIN_OP:
- if (left_value < right_value)
- i = left_value;
- else
- i = right_value;
- break;
-
- default:
- abort ();
- }
-
- if (i == left_value)
- return left;
- if (i == right_value)
- return right;
- return make_numeric_value (i);
- }
- else if (GET_CODE (right) == IF_THEN_ELSE)
- {
- /* Apply recursively to all values within. */
- rtx newleft = operate_exp (op, left, XEXP (right, 1));
- rtx newright = operate_exp (op, left, XEXP (right, 2));
- if (rtx_equal_p (newleft, newright))
- return newleft;
- return attr_rtx (IF_THEN_ELSE, XEXP (right, 0), newleft, newright);
- }
- else if (GET_CODE (right) == COND)
- {
- int allsame = 1;
- rtx defval;
-
- newexp = rtx_alloc (COND);
- XVEC (newexp, 0) = rtvec_alloc (XVECLEN (right, 0));
- defval = XEXP (newexp, 1) = operate_exp (op, left, XEXP (right, 1));
-
- for (i = 0; i < XVECLEN (right, 0); i += 2)
- {
- XVECEXP (newexp, 0, i) = XVECEXP (right, 0, i);
- XVECEXP (newexp, 0, i + 1)
- = operate_exp (op, left, XVECEXP (right, 0, i + 1));
- if (! rtx_equal_p (XVECEXP (newexp, 0, i + 1),
- defval))
- allsame = 0;
- }
-
- /* If the resulting cond is trivial (all alternatives
- give the same value), optimize it away. */
- if (allsame)
- return operate_exp (op, left, XEXP (right, 1));
-
- return newexp;
- }
- else
- fatal ("badly formed attribute value");
- }
-
- /* A hack to prevent expand_units from completely blowing up: ORX_OP does
- not associate through IF_THEN_ELSE. */
- else if (op == ORX_OP && GET_CODE (right) == IF_THEN_ELSE)
- {
- return attr_rtx (IOR, left, right);
- }
-
- /* Otherwise, do recursion the other way. */
- else if (GET_CODE (left) == IF_THEN_ELSE)
- {
- rtx newleft = operate_exp (op, XEXP (left, 1), right);
- rtx newright = operate_exp (op, XEXP (left, 2), right);
- if (rtx_equal_p (newleft, newright))
- return newleft;
- return attr_rtx (IF_THEN_ELSE, XEXP (left, 0), newleft, newright);
- }
- else if (GET_CODE (left) == COND)
- {
- int allsame = 1;
- rtx defval;
-
- newexp = rtx_alloc (COND);
- XVEC (newexp, 0) = rtvec_alloc (XVECLEN (left, 0));
- defval = XEXP (newexp, 1) = operate_exp (op, XEXP (left, 1), right);
-
- for (i = 0; i < XVECLEN (left, 0); i += 2)
- {
- XVECEXP (newexp, 0, i) = XVECEXP (left, 0, i);
- XVECEXP (newexp, 0, i + 1)
- = operate_exp (op, XVECEXP (left, 0, i + 1), right);
- if (! rtx_equal_p (XVECEXP (newexp, 0, i + 1),
- defval))
- allsame = 0;
- }
-
- /* If the cond is trivial (all alternatives give the same value),
- optimize it away. */
- if (allsame)
- return operate_exp (op, XEXP (left, 1), right);
-
- /* If the result is the same as the LEFT operand,
- just use that. */
- if (rtx_equal_p (newexp, left))
- return left;
-
- return newexp;
- }
-
- else
- fatal ("badly formed attribute value");
- /* NOTREACHED */
- return NULL;
-}
-
-/* Once all attributes and DEFINE_FUNCTION_UNITs have been read, we
- construct a number of attributes.
-
- The first produces a function `function_units_used' which is given an
- insn and produces an encoding showing which function units are required
- for the execution of that insn. If the value is non-negative, the insn
- uses that unit; otherwise, the value is a one's complement mask of units
- used.
-
- The second produces a function `result_ready_cost' which is used to
- determine the time that the result of an insn will be ready and hence
- a worst-case schedule.
-
- Both of these produce quite complex expressions which are then set as the
- default value of internal attributes. Normal attribute simplification
- should produce reasonable expressions.
-
- For each unit, a `<name>_unit_ready_cost' function will take an
- insn and give the delay until that unit will be ready with the result
- and a `<name>_unit_conflict_cost' function is given an insn already
- executing on the unit and a candidate to execute and will give the
- cost from the time the executing insn started until the candidate
- can start (ignore limitations on the number of simultaneous insns).
-
- For each unit, a `<name>_unit_blockage' function is given an insn
- already executing on the unit and a candidate to execute and will
- give the delay incurred due to function unit conflicts. The range of
- blockage cost values for a given executing insn is given by the
- `<name>_unit_blockage_range' function. These values are encoded in
- an int where the upper half gives the minimum value and the lower
- half gives the maximum value. */
-
-static void
-expand_units (void)
-{
- struct function_unit *unit, **unit_num;
- struct function_unit_op *op, **op_array, ***unit_ops;
- rtx unitsmask;
- rtx readycost;
- rtx newexp;
- const char *str;
- int i, j, u, num, nvalues;
-
- /* Rebuild the condition for the unit to share the RTL expressions.
- Sharing is required by simplify_by_exploding. Build the issue delay
- expressions. Validate the expressions we were given for the conditions
- and conflict vector. Then make attributes for use in the conflict
- function. */
-
- for (unit = units; unit; unit = unit->next)
- {
- unit->condexp = check_attr_test (unit->condexp, 0, unit->first_lineno);
-
- for (op = unit->ops; op; op = op->next)
- {
- rtx issue_delay = make_numeric_value (op->issue_delay);
- rtx issue_exp = issue_delay;
-
- /* Build, validate, and simplify the issue delay expression. */
- if (op->conflict_exp != true_rtx)
- issue_exp = attr_rtx (IF_THEN_ELSE, op->conflict_exp,
- issue_exp, make_numeric_value (0));
- issue_exp = check_attr_value (make_canonical (NULL_ATTR,
- issue_exp),
- NULL_ATTR);
- issue_exp = simplify_knowing (issue_exp, unit->condexp);
- op->issue_exp = issue_exp;
-
- /* Make an attribute for use in the conflict function if needed. */
- unit->needs_conflict_function = (unit->issue_delay.min
- != unit->issue_delay.max);
- if (unit->needs_conflict_function)
- {
- str = attr_printf ((strlen (unit->name) + sizeof "*_cost_"
- + MAX_DIGITS),
- "*%s_cost_%d", unit->name, op->num);
- make_internal_attr (str, issue_exp, ATTR_SPECIAL);
- }
-
- /* Validate the condition. */
- op->condexp = check_attr_test (op->condexp, 0, op->lineno);
- }
- }
-
- /* Compute the mask of function units used. Initially, the unitsmask is
- zero. Set up a conditional to compute each unit's contribution. */
- unitsmask = make_numeric_value (0);
- newexp = rtx_alloc (IF_THEN_ELSE);
- XEXP (newexp, 2) = make_numeric_value (0);
-
- /* If we have just a few units, we may be all right expanding the whole
- thing. But the expansion is 2**N in space on the number of opclasses,
- so we can't do this for very long -- Alpha and MIPS in particular have
- problems with this. So in that situation, we fall back on an alternate
- implementation method. */
-#define NUM_UNITOP_CUTOFF 20
-
- if (num_unit_opclasses < NUM_UNITOP_CUTOFF)
- {
- /* Merge each function unit into the unit mask attributes. */
- for (unit = units; unit; unit = unit->next)
- {
- XEXP (newexp, 0) = unit->condexp;
- XEXP (newexp, 1) = make_numeric_value (1 << unit->num);
- unitsmask = operate_exp (OR_OP, unitsmask, newexp);
- }
- }
- else
- {
- /* Merge each function unit into the unit mask attributes. */
- for (unit = units; unit; unit = unit->next)
- {
- XEXP (newexp, 0) = unit->condexp;
- XEXP (newexp, 1) = make_numeric_value (1 << unit->num);
- unitsmask = operate_exp (ORX_OP, unitsmask, attr_copy_rtx (newexp));
- }
- }
-
- /* Simplify the unit mask expression, encode it, and make an attribute
- for the function_units_used function. */
- unitsmask = simplify_by_exploding (unitsmask);
-
- if (num_unit_opclasses < NUM_UNITOP_CUTOFF)
- unitsmask = encode_units_mask (unitsmask);
- else
- {
- /* We can no longer encode unitsmask at compile time, so emit code to
- calculate it at runtime. Rather, put a marker for where we'd do
- the code, and actually output it in write_attr_get(). */
- unitsmask = attr_rtx (FFS, unitsmask);
- }
-
- make_internal_attr ("*function_units_used", unitsmask,
- (ATTR_NEGATIVE_OK | ATTR_FUNC_UNITS));
-
- /* Create an array of ops for each unit. Add an extra unit for the
- result_ready_cost function that has the ops of all other units. */
- unit_ops = xmalloc ((num_units + 1) * sizeof (struct function_unit_op **));
- unit_num = xmalloc ((num_units + 1) * sizeof (struct function_unit *));
-
- unit_num[num_units] = unit = xmalloc (sizeof (struct function_unit));
- unit->num = num_units;
- unit->num_opclasses = 0;
-
- for (unit = units; unit; unit = unit->next)
- {
- unit_num[num_units]->num_opclasses += unit->num_opclasses;
- unit_num[unit->num] = unit;
- unit_ops[unit->num] = op_array =
- xmalloc (unit->num_opclasses * sizeof (struct function_unit_op *));
-
- for (op = unit->ops; op; op = op->next)
- op_array[op->num] = op;
- }
-
- /* Compose the array of ops for the extra unit. */
- unit_ops[num_units] = op_array =
- xmalloc (unit_num[num_units]->num_opclasses
- * sizeof (struct function_unit_op *));
-
- for (unit = units, i = 0; unit; i += unit->num_opclasses, unit = unit->next)
- memcpy (&op_array[i], unit_ops[unit->num],
- unit->num_opclasses * sizeof (struct function_unit_op *));
-
- /* Compute the ready cost function for each unit by computing the
- condition for each non-default value. */
- for (u = 0; u <= num_units; u++)
- {
- rtx orexp;
- int value;
-
- unit = unit_num[u];
- op_array = unit_ops[unit->num];
- num = unit->num_opclasses;
-
- /* Sort the array of ops into increasing ready cost order. */
- for (i = 0; i < num; i++)
- for (j = num - 1; j > i; j--)
- if (op_array[j - 1]->ready < op_array[j]->ready)
- {
- op = op_array[j];
- op_array[j] = op_array[j - 1];
- op_array[j - 1] = op;
- }
-
- /* Determine how many distinct non-default ready cost values there
- are. We use a default ready cost value of 1. */
- nvalues = 0; value = 1;
- for (i = num - 1; i >= 0; i--)
- if (op_array[i]->ready > value)
- {
- value = op_array[i]->ready;
- nvalues++;
- }
-
- if (nvalues == 0)
- readycost = make_numeric_value (1);
- else
- {
- /* Construct the ready cost expression as a COND of each value from
- the largest to the smallest. */
- readycost = rtx_alloc (COND);
- XVEC (readycost, 0) = rtvec_alloc (nvalues * 2);
- XEXP (readycost, 1) = make_numeric_value (1);
-
- nvalues = 0;
- orexp = false_rtx;
- value = op_array[0]->ready;
- for (i = 0; i < num; i++)
- {
- op = op_array[i];
- if (op->ready <= 1)
- break;
- else if (op->ready == value)
- orexp = insert_right_side (IOR, orexp, op->condexp, -2, -2);
- else
- {
- XVECEXP (readycost, 0, nvalues * 2) = orexp;
- XVECEXP (readycost, 0, nvalues * 2 + 1)
- = make_numeric_value (value);
- nvalues++;
- value = op->ready;
- orexp = op->condexp;
- }
- }
- XVECEXP (readycost, 0, nvalues * 2) = orexp;
- XVECEXP (readycost, 0, nvalues * 2 + 1) = make_numeric_value (value);
- }
-
- if (u < num_units)
- {
- rtx max_blockage = 0, min_blockage = 0;
-
- /* Simplify the readycost expression by only considering insns
- that use the unit. */
- readycost = simplify_knowing (readycost, unit->condexp);
-
- /* Determine the blockage cost the executing insn (E) given
- the candidate insn (C). This is the maximum of the issue
- delay, the pipeline delay, and the simultaneity constraint.
- Each function_unit_op represents the characteristics of the
- candidate insn, so in the expressions below, C is a known
- term and E is an unknown term.
-
- We compute the blockage cost for each E for every possible C.
- Thus OP represents E, and READYCOST is a list of values for
- every possible C.
-
- The issue delay function for C is op->issue_exp and is used to
- write the `<name>_unit_conflict_cost' function. Symbolically
- this is "ISSUE-DELAY (E,C)".
-
- The pipeline delay results form the FIFO constraint on the
- function unit and is "READY-COST (E) + 1 - READY-COST (C)".
-
- The simultaneity constraint is based on how long it takes to
- fill the unit given the minimum issue delay. FILL-TIME is the
- constant "MIN (ISSUE-DELAY (*,*)) * (SIMULTANEITY - 1)", and
- the simultaneity constraint is "READY-COST (E) - FILL-TIME"
- if SIMULTANEITY is nonzero and zero otherwise.
-
- Thus, BLOCKAGE (E,C) when SIMULTANEITY is zero is
-
- MAX (ISSUE-DELAY (E,C),
- READY-COST (E) - (READY-COST (C) - 1))
-
- and otherwise
-
- MAX (ISSUE-DELAY (E,C),
- READY-COST (E) - (READY-COST (C) - 1),
- READY-COST (E) - FILL-TIME)
-
- The `<name>_unit_blockage' function is computed by determining
- this value for each candidate insn. As these values are
- computed, we also compute the upper and lower bounds for
- BLOCKAGE (E,*). These are combined to form the function
- `<name>_unit_blockage_range'. Finally, the maximum blockage
- cost, MAX (BLOCKAGE (*,*)), is computed. */
-
- for (op = unit->ops; op; op = op->next)
- {
- rtx blockage = op->issue_exp;
- blockage = simplify_knowing (blockage, unit->condexp);
-
- /* Add this op's contribution to MAX (BLOCKAGE (E,*)) and
- MIN (BLOCKAGE (E,*)). */
- if (max_blockage == 0)
- max_blockage = min_blockage = blockage;
- else
- {
- max_blockage
- = simplify_knowing (operate_exp (MAX_OP, max_blockage,
- blockage),
- unit->condexp);
- min_blockage
- = simplify_knowing (operate_exp (MIN_OP, min_blockage,
- blockage),
- unit->condexp);
- }
-
- /* Make an attribute for use in the blockage function. */
- str = attr_printf ((strlen (unit->name) + sizeof "*_block_"
- + MAX_DIGITS),
- "*%s_block_%d", unit->name, op->num);
- make_internal_attr (str, blockage, ATTR_SPECIAL);
- }
-
- /* Record MAX (BLOCKAGE (*,*)). */
- {
- int unknown;
- unit->max_blockage = max_attr_value (max_blockage, &unknown);
- }
-
- /* See if the upper and lower bounds of BLOCKAGE (E,*) are the
- same. If so, the blockage function carries no additional
- information and is not written. */
- newexp = operate_exp (EQ_OP, max_blockage, min_blockage);
- newexp = simplify_knowing (newexp, unit->condexp);
- unit->needs_blockage_function
- = (GET_CODE (newexp) != CONST_STRING
- || atoi (XSTR (newexp, 0)) != 1);
-
- /* If the all values of BLOCKAGE (E,C) have the same value,
- neither blockage function is written. */
- unit->needs_range_function
- = (unit->needs_blockage_function
- || GET_CODE (max_blockage) != CONST_STRING);
-
- if (unit->needs_range_function)
- {
- /* Compute the blockage range function and make an attribute
- for writing its value. */
- newexp = operate_exp (RANGE_OP, min_blockage, max_blockage);
- newexp = simplify_knowing (newexp, unit->condexp);
-
- str = attr_printf ((strlen (unit->name)
- + sizeof "*_unit_blockage_range"),
- "*%s_unit_blockage_range", unit->name);
- make_internal_attr (str, newexp, (ATTR_STATIC|ATTR_BLOCKAGE|ATTR_UNSIGNED));
- }
-
- str = attr_printf (strlen (unit->name) + sizeof "*_unit_ready_cost",
- "*%s_unit_ready_cost", unit->name);
- make_internal_attr (str, readycost, ATTR_STATIC);
- }
- else
- {
- /* Make an attribute for the ready_cost function. Simplifying
- further with simplify_by_exploding doesn't win. */
- str = "*result_ready_cost";
- make_internal_attr (str, readycost, ATTR_NONE);
- }
- }
-
- /* For each unit that requires a conflict cost function, make an attribute
- that maps insns to the operation number. */
- for (unit = units; unit; unit = unit->next)
- {
- rtx caseexp;
-
- if (! unit->needs_conflict_function
- && ! unit->needs_blockage_function)
- continue;
-
- caseexp = rtx_alloc (COND);
- XVEC (caseexp, 0) = rtvec_alloc ((unit->num_opclasses - 1) * 2);
-
- for (op = unit->ops; op; op = op->next)
- {
- /* Make our adjustment to the COND being computed. If we are the
- last operation class, place our values into the default of the
- COND. */
- if (op->num == unit->num_opclasses - 1)
- {
- XEXP (caseexp, 1) = make_numeric_value (op->num);
- }
- else
- {
- XVECEXP (caseexp, 0, op->num * 2) = op->condexp;
- XVECEXP (caseexp, 0, op->num * 2 + 1)
- = make_numeric_value (op->num);
- }
- }
-
- /* Simplifying caseexp with simplify_by_exploding doesn't win. */
- str = attr_printf (strlen (unit->name) + sizeof "*_cases",
- "*%s_cases", unit->name);
- make_internal_attr (str, caseexp, ATTR_SPECIAL);
- }
-}
-
-/* Simplify EXP given KNOWN_TRUE. */
-
-static rtx
-simplify_knowing (rtx exp, rtx known_true)
-{
- if (GET_CODE (exp) != CONST_STRING)
- {
- int unknown = 0, max;
- max = max_attr_value (exp, &unknown);
- if (! unknown)
- {
- exp = attr_rtx (IF_THEN_ELSE, known_true, exp,
- make_numeric_value (max));
- exp = simplify_by_exploding (exp);
- }
- }
- return exp;
-}
-
-/* Translate the CONST_STRING expressions in X to change the encoding of
- value. On input, the value is a bitmask with a one bit for each unit
- used; on output, the value is the unit number (zero based) if one
- and only one unit is used or the one's complement of the bitmask. */
-
-static rtx
-encode_units_mask (rtx x)
-{
- int i;
- int j;
- enum rtx_code code;
- const char *fmt;
-
- code = GET_CODE (x);
-
- switch (code)
- {
- case CONST_STRING:
- i = atoi (XSTR (x, 0));
- if (i < 0)
- /* The sign bit encodes a one's complement mask. */
- abort ();
- else if (i != 0 && i == (i & -i))
- /* Only one bit is set, so yield that unit number. */
- for (j = 0; (i >>= 1) != 0; j++)
- ;
- else
- j = ~i;
- return attr_rtx (CONST_STRING, attr_printf (MAX_DIGITS, "%d", j));
-
- case REG:
- case QUEUED:
- case CONST_INT:
- case CONST_DOUBLE:
- case CONST_VECTOR:
- case SYMBOL_REF:
- case CODE_LABEL:
- case PC:
- case CC0:
- case EQ_ATTR:
- case EQ_ATTR_ALT:
- return x;
-
- default:
- break;
- }
-
- /* Compare the elements. If any pair of corresponding elements
- fail to match, return 0 for the whole things. */
-
- fmt = GET_RTX_FORMAT (code);
- for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
- {
- switch (fmt[i])
- {
- case 'V':
- case 'E':
- for (j = 0; j < XVECLEN (x, i); j++)
- XVECEXP (x, i, j) = encode_units_mask (XVECEXP (x, i, j));
- break;
-
- case 'e':
- XEXP (x, i) = encode_units_mask (XEXP (x, i));
- break;
- }
- }
- return x;
-}
-
/* Once all attributes and insns have been read and checked, we construct for
each attribute value a list of all the insns that have that value for
the attribute. */
av = get_attr_value (value, attr, id->insn_code);
ie = oballoc (sizeof (struct insn_ent));
- ie->insn_code = id->insn_code;
- ie->insn_index = id->insn_code;
+ ie->def = id;
insert_insn_ent (av, ie);
}
}
new_av = get_attr_value (substitute_address (av->value,
no_address_fn[i],
address_fn[i]),
- new_attr, ie->insn_code);
+ new_attr, ie->def->insn_code);
new_ie = oballoc (sizeof (struct insn_ent));
- new_ie->insn_code = ie->insn_code;
- new_ie->insn_index = ie->insn_index;
+ new_ie->def = ie->def;
insert_insn_ent (new_av, new_ie);
}
}
}
av->num_insns--;
- if (ie->insn_code == -1)
+ if (ie->def->insn_code == -1)
av->has_asm_insn = 0;
num_insn_ents--;
ie->next = av->first_insn;
av->first_insn = ie;
av->num_insns++;
- if (ie->insn_code == -1)
+ if (ie->def->insn_code == -1)
av->has_asm_insn = 1;
num_insn_ents++;
rtx newexp;
int i;
- if (GET_CODE (value) == CONST_STRING)
+ switch (GET_CODE (value))
{
+ case CONST_STRING:
if (! strcmp_check (XSTR (value, 0), XSTR (exp, 1)))
newexp = true_rtx;
else
newexp = false_rtx;
- }
- else if (GET_CODE (value) == SYMBOL_REF)
- {
- char *p;
- char string[256];
-
- if (GET_CODE (exp) != EQ_ATTR)
- abort ();
-
- if (strlen (XSTR (exp, 0)) + strlen (XSTR (exp, 1)) + 2 > 256)
- abort ();
-
- strcpy (string, XSTR (exp, 0));
- strcat (string, "_");
- strcat (string, XSTR (exp, 1));
- for (p = string; *p; p++)
- *p = TOUPPER (*p);
-
- newexp = attr_rtx (EQ, value,
- attr_rtx (SYMBOL_REF,
- DEF_ATTR_STRING (string)));
- }
- else if (GET_CODE (value) == COND)
- {
- /* We construct an IOR of all the cases for which the requested attribute
- value is present. Since we start with FALSE, if it is not present,
- FALSE will be returned.
+ break;
+
+ case SYMBOL_REF:
+ {
+ char *p;
+ char string[256];
+
+ gcc_assert (GET_CODE (exp) == EQ_ATTR);
+ gcc_assert (strlen (XSTR (exp, 0)) + strlen (XSTR (exp, 1)) + 2
+ <= 256);
+
+ strcpy (string, XSTR (exp, 0));
+ strcat (string, "_");
+ strcat (string, XSTR (exp, 1));
+ for (p = string; *p; p++)
+ *p = TOUPPER (*p);
+
+ newexp = attr_rtx (EQ, value,
+ attr_rtx (SYMBOL_REF,
+ DEF_ATTR_STRING (string)));
+ break;
+ }
+ case COND:
+ /* We construct an IOR of all the cases for which the
+ requested attribute value is present. Since we start with
+ FALSE, if it is not present, FALSE will be returned.
+
Each case is the AND of the NOT's of the previous conditions with the
current condition; in the default case the current condition is TRUE.
-
+
For each possible COND value, call ourselves recursively.
-
+
The extra TRUE and FALSE expressions will be eliminated by another
call to the simplification routine. */
insn_code, insn_index),
insn_code, insn_index);
newexp = insert_right_side (IOR, orexp, right, insn_code, insn_index);
+ break;
+
+ default:
+ gcc_unreachable ();
}
- else
- abort ();
/* If uses an address, must return original expression. But set the
ATTR_IND_SIMPLIFIED_P bit so we don't try to simplify it again. */
return !(XINT (s2, 0) &~ XINT (s1, 0));
default:
- abort ();
+ gcc_unreachable ();
}
}
/* Returns true if S1 is a subset of complement of S2. */
-static bool attr_alt_subset_of_compl_p (rtx s1, rtx s2)
+static bool
+attr_alt_subset_of_compl_p (rtx s1, rtx s2)
{
switch ((XINT (s1, 1) << 1) | XINT (s2, 1))
{
return false;
default:
- abort ();
+ gcc_unreachable ();
}
}
XINT (result, 0) = XINT (s1, 0) | XINT (s2, 0);
break;
default:
- abort ();
+ gcc_unreachable ();
}
XINT (result, 1) = XINT (s1, 1) & XINT (s2, 1);
XINT (result, 0) = XINT (s1, 0) & XINT (s2, 0);
break;
default:
- abort ();
+ gcc_unreachable ();
}
XINT (result, 1) = XINT (s1, 1) | XINT (s2, 1);
&& (attr = find_attr (&XSTR (exp, 0), 0)) != NULL)
for (av = attr->first_value; av; av = av->next)
for (ie = av->first_insn; ie; ie = ie->next)
- if (ie->insn_code == insn_code)
+ if (ie->def->insn_code == insn_code)
{
rtx x;
x = evaluate_eq_attr (exp, av->value, insn_code, insn_index);
insn_code_values = xcalloc ((insn_code_number + 2),
sizeof (struct attr_value_list *));
- /* Offset the table address so we can index by -2 or -1. */
- insn_code_values += 2;
-
- iv = ivbuf = xmalloc (num_insn_ents * sizeof (struct attr_value_list));
-
- for (i = 0; i < MAX_ATTRS_INDEX; i++)
- for (attr = attrs[i]; attr; attr = attr->next)
- for (av = attr->first_value; av; av = av->next)
- for (ie = av->first_insn; ie; ie = ie->next)
- {
- iv->attr = attr;
- iv->av = av;
- iv->ie = ie;
- iv->next = insn_code_values[ie->insn_code];
- insn_code_values[ie->insn_code] = iv;
- iv++;
- }
-
- /* Sanity check on num_insn_ents. */
- if (iv != ivbuf + num_insn_ents)
- abort ();
-
- /* Process one insn code at a time. */
- for (i = -2; i < insn_code_number; i++)
- {
- /* Clear the ATTR_CURR_SIMPLIFIED_P flag everywhere relevant.
- We use it to mean "already simplified for this insn". */
- for (iv = insn_code_values[i]; iv; iv = iv->next)
- clear_struct_flag (iv->av->value);
-
- for (iv = insn_code_values[i]; iv; iv = iv->next)
- {
- struct obstack *old = rtl_obstack;
-
- attr = iv->attr;
- av = iv->av;
- ie = iv->ie;
- if (GET_CODE (av->value) != COND)
- continue;
-
- rtl_obstack = temp_obstack;
- newexp = av->value;
- while (GET_CODE (newexp) == COND)
- {
- rtx newexp2 = simplify_cond (newexp, ie->insn_code,
- ie->insn_index);
- if (newexp2 == newexp)
- break;
- newexp = newexp2;
- }
-
- rtl_obstack = old;
- if (newexp != av->value)
- {
- newexp = attr_copy_rtx (newexp);
- remove_insn_ent (av, ie);
- av = get_attr_value (newexp, attr, ie->insn_code);
- iv->av = av;
- insert_insn_ent (av, ie);
- }
- }
- }
-
- free (ivbuf);
- free (insn_code_values - 2);
-}
-
-/* If EXP is a suitable expression, reorganize it by constructing an
- equivalent expression that is a COND with the tests being all combinations
- of attribute values and the values being simple constants. */
-
-static rtx
-simplify_by_exploding (rtx exp)
-{
- rtx list = 0, link, condexp, defval = NULL_RTX;
- struct dimension *space;
- rtx *condtest, *condval;
- int i, j, total, ndim = 0;
- int most_tests, num_marks, new_marks;
- rtx ret;
-
- /* Locate all the EQ_ATTR expressions. */
- if (! find_and_mark_used_attributes (exp, &list, &ndim) || ndim == 0)
- {
- unmark_used_attributes (list, 0, 0);
- return exp;
- }
-
- /* Create an attribute space from the list of used attributes. For each
- dimension in the attribute space, record the attribute, list of values
- used, and number of values used. Add members to the list of values to
- cover the domain of the attribute. This makes the expanded COND form
- order independent. */
-
- space = xmalloc (ndim * sizeof (struct dimension));
-
- total = 1;
- for (ndim = 0; list; ndim++)
- {
- /* Pull the first attribute value from the list and record that
- attribute as another dimension in the attribute space. */
- const char *name = XSTR (XEXP (list, 0), 0);
- rtx *prev;
-
- space[ndim].attr = find_attr (&name, 0);
- XSTR (XEXP (list, 0), 0) = name;
-
- if (space[ndim].attr == 0
- || space[ndim].attr->is_numeric)
- {
- unmark_used_attributes (list, space, ndim);
- return exp;
- }
-
- /* Add all remaining attribute values that refer to this attribute. */
- space[ndim].num_values = 0;
- space[ndim].values = 0;
- prev = &list;
- for (link = list; link; link = *prev)
- if (! strcmp_check (XSTR (XEXP (link, 0), 0), name))
- {
- space[ndim].num_values++;
- *prev = XEXP (link, 1);
- XEXP (link, 1) = space[ndim].values;
- space[ndim].values = link;
- }
- else
- prev = &XEXP (link, 1);
-
- /* Add sufficient members to the list of values to make the list
- mutually exclusive and record the total size of the attribute
- space. */
- total *= add_values_to_cover (&space[ndim]);
- }
-
- /* Sort the attribute space so that the attributes go from non-constant
- to constant and from most values to least values. */
- for (i = 0; i < ndim; i++)
- for (j = ndim - 1; j > i; j--)
- if ((space[j-1].attr->is_const && !space[j].attr->is_const)
- || space[j-1].num_values < space[j].num_values)
- {
- struct dimension tmp;
- tmp = space[j];
- space[j] = space[j - 1];
- space[j - 1] = tmp;
- }
-
- /* Establish the initial current value. */
- for (i = 0; i < ndim; i++)
- space[i].current_value = space[i].values;
-
- condtest = xmalloc (total * sizeof (rtx));
- condval = xmalloc (total * sizeof (rtx));
-
- /* Expand the tests and values by iterating over all values in the
- attribute space. */
- for (i = 0;; i++)
- {
- condtest[i] = test_for_current_value (space, ndim);
- condval[i] = simplify_with_current_value (exp, space, ndim);
- if (! increment_current_value (space, ndim))
- break;
- }
- if (i != total - 1)
- abort ();
-
- /* We are now finished with the original expression. */
- unmark_used_attributes (0, space, ndim);
- free (space);
-
- /* Find the most used constant value and make that the default. */
- most_tests = -1;
- for (i = num_marks = 0; i < total; i++)
- if (GET_CODE (condval[i]) == CONST_STRING
- && ! ATTR_EQ_ATTR_P (condval[i]))
- {
- /* Mark the unmarked constant value and count how many are marked. */
- ATTR_EQ_ATTR_P (condval[i]) = 1;
- for (j = new_marks = 0; j < total; j++)
- if (GET_CODE (condval[j]) == CONST_STRING
- && ATTR_EQ_ATTR_P (condval[j]))
- new_marks++;
- if (new_marks - num_marks > most_tests)
- {
- most_tests = new_marks - num_marks;
- defval = condval[i];
- }
- num_marks = new_marks;
- }
- /* Clear all the marks. */
- for (i = 0; i < total; i++)
- ATTR_EQ_ATTR_P (condval[i]) = 0;
-
- /* Give up if nothing is constant. */
- if (num_marks == 0)
- ret = exp;
-
- /* If all values are the default, use that. */
- else if (total == most_tests)
- ret = defval;
-
- /* Make a COND with the most common constant value the default. (A more
- complex method where tests with the same value were combined didn't
- seem to improve things.) */
- else
- {
- condexp = rtx_alloc (COND);
- XVEC (condexp, 0) = rtvec_alloc ((total - most_tests) * 2);
- XEXP (condexp, 1) = defval;
- for (i = j = 0; i < total; i++)
- if (condval[i] != defval)
- {
- XVECEXP (condexp, 0, 2 * j) = condtest[i];
- XVECEXP (condexp, 0, 2 * j + 1) = condval[i];
- j++;
- }
- ret = condexp;
- }
- free (condtest);
- free (condval);
- return ret;
-}
-
-/* Set the ATTR_EQ_ATTR_P flag for all EQ_ATTR expressions in EXP and
- verify that EXP can be simplified to a constant term if all the EQ_ATTR
- tests have known value. */
-
-static int
-find_and_mark_used_attributes (rtx exp, rtx *terms, int *nterms)
-{
- int i;
-
- switch (GET_CODE (exp))
- {
- case EQ_ATTR:
- if (! ATTR_EQ_ATTR_P (exp))
- {
- rtx link = rtx_alloc (EXPR_LIST);
- XEXP (link, 0) = exp;
- XEXP (link, 1) = *terms;
- *terms = link;
- *nterms += 1;
- ATTR_EQ_ATTR_P (exp) = 1;
- }
- return 1;
-
- case CONST_STRING:
- case CONST_INT:
- return 1;
-
- case IF_THEN_ELSE:
- if (! find_and_mark_used_attributes (XEXP (exp, 2), terms, nterms))
- return 0;
- case IOR:
- case AND:
- if (! find_and_mark_used_attributes (XEXP (exp, 1), terms, nterms))
- return 0;
- case NOT:
- if (! find_and_mark_used_attributes (XEXP (exp, 0), terms, nterms))
- return 0;
- return 1;
-
- case COND:
- for (i = 0; i < XVECLEN (exp, 0); i++)
- if (! find_and_mark_used_attributes (XVECEXP (exp, 0, i), terms, nterms))
- return 0;
- if (! find_and_mark_used_attributes (XEXP (exp, 1), terms, nterms))
- return 0;
- return 1;
-
- default:
- return 0;
- }
-}
-
-/* Clear the ATTR_EQ_ATTR_P flag in all EQ_ATTR expressions on LIST and
- in the values of the NDIM-dimensional attribute space SPACE. */
-
-static void
-unmark_used_attributes (rtx list, struct dimension *space, int ndim)
-{
- rtx link, exp;
- int i;
-
- for (i = 0; i < ndim; i++)
- unmark_used_attributes (space[i].values, 0, 0);
-
- for (link = list; link; link = XEXP (link, 1))
- {
- exp = XEXP (link, 0);
- if (GET_CODE (exp) == EQ_ATTR)
- ATTR_EQ_ATTR_P (exp) = 0;
- }
-}
-
-/* Update the attribute dimension DIM so that all values of the attribute
- are tested. Return the updated number of values. */
-
-static int
-add_values_to_cover (struct dimension *dim)
-{
- struct attr_value *av;
- rtx exp, link, *prev;
- int nalt = 0;
-
- for (av = dim->attr->first_value; av; av = av->next)
- if (GET_CODE (av->value) == CONST_STRING)
- nalt++;
-
- if (nalt < dim->num_values)
- abort ();
- else if (nalt == dim->num_values)
- /* OK. */
- ;
- else if (nalt * 2 < dim->num_values * 3)
- {
- /* Most all the values of the attribute are used, so add all the unused
- values. */
- prev = &dim->values;
- for (link = dim->values; link; link = *prev)
- prev = &XEXP (link, 1);
-
- for (av = dim->attr->first_value; av; av = av->next)
- if (GET_CODE (av->value) == CONST_STRING)
- {
- exp = attr_eq (dim->attr->name, XSTR (av->value, 0));
- if (ATTR_EQ_ATTR_P (exp))
- continue;
-
- link = rtx_alloc (EXPR_LIST);
- XEXP (link, 0) = exp;
- XEXP (link, 1) = 0;
- *prev = link;
- prev = &XEXP (link, 1);
- }
- dim->num_values = nalt;
- }
- else
- {
- rtx orexp = false_rtx;
-
- /* Very few values are used, so compute a mutually exclusive
- expression. (We could do this for numeric values if that becomes
- important.) */
- prev = &dim->values;
- for (link = dim->values; link; link = *prev)
- {
- orexp = insert_right_side (IOR, orexp, XEXP (link, 0), -2, -2);
- prev = &XEXP (link, 1);
- }
- link = rtx_alloc (EXPR_LIST);
- XEXP (link, 0) = attr_rtx (NOT, orexp);
- XEXP (link, 1) = 0;
- *prev = link;
- dim->num_values++;
- }
- return dim->num_values;
-}
-
-/* Increment the current value for the NDIM-dimensional attribute space SPACE
- and return FALSE if the increment overflowed. */
-
-static int
-increment_current_value (struct dimension *space, int ndim)
-{
- int i;
-
- for (i = ndim - 1; i >= 0; i--)
- {
- if ((space[i].current_value = XEXP (space[i].current_value, 1)) == 0)
- space[i].current_value = space[i].values;
- else
- return 1;
- }
- return 0;
-}
-
-/* Construct an expression corresponding to the current value for the
- NDIM-dimensional attribute space SPACE. */
-
-static rtx
-test_for_current_value (struct dimension *space, int ndim)
-{
- int i;
- rtx exp = true_rtx;
-
- for (i = 0; i < ndim; i++)
- exp = insert_right_side (AND, exp, XEXP (space[i].current_value, 0),
- -2, -2);
-
- return exp;
-}
-
-/* Given the current value of the NDIM-dimensional attribute space SPACE,
- set the corresponding EQ_ATTR expressions to that value and reduce
- the expression EXP as much as possible. On input [and output], all
- known EQ_ATTR expressions are set to FALSE. */
-
-static rtx
-simplify_with_current_value (rtx exp, struct dimension *space, int ndim)
-{
- int i;
- rtx x;
-
- /* Mark each current value as TRUE. */
- for (i = 0; i < ndim; i++)
- {
- x = XEXP (space[i].current_value, 0);
- if (GET_CODE (x) == EQ_ATTR)
- ATTR_EQ_ATTR_P (x) = 0;
- }
-
- exp = simplify_with_current_value_aux (exp);
-
- /* Change each current value back to FALSE. */
- for (i = 0; i < ndim; i++)
- {
- x = XEXP (space[i].current_value, 0);
- if (GET_CODE (x) == EQ_ATTR)
- ATTR_EQ_ATTR_P (x) = 1;
- }
+ /* Offset the table address so we can index by -2 or -1. */
+ insn_code_values += 2;
- return exp;
-}
+ iv = ivbuf = xmalloc (num_insn_ents * sizeof (struct attr_value_list));
-/* Reduce the expression EXP based on the ATTR_EQ_ATTR_P settings of
- all EQ_ATTR expressions. */
+ for (i = 0; i < MAX_ATTRS_INDEX; i++)
+ for (attr = attrs[i]; attr; attr = attr->next)
+ for (av = attr->first_value; av; av = av->next)
+ for (ie = av->first_insn; ie; ie = ie->next)
+ {
+ iv->attr = attr;
+ iv->av = av;
+ iv->ie = ie;
+ iv->next = insn_code_values[ie->def->insn_code];
+ insn_code_values[ie->def->insn_code] = iv;
+ iv++;
+ }
-static rtx
-simplify_with_current_value_aux (rtx exp)
-{
- int i;
- rtx cond;
+ /* Sanity check on num_insn_ents. */
+ gcc_assert (iv == ivbuf + num_insn_ents);
- switch (GET_CODE (exp))
+ /* Process one insn code at a time. */
+ for (i = -2; i < insn_code_number; i++)
{
- case EQ_ATTR:
- if (ATTR_EQ_ATTR_P (exp))
- return false_rtx;
- else
- return true_rtx;
- case CONST_STRING:
- case CONST_INT:
- return exp;
-
- case IF_THEN_ELSE:
- cond = simplify_with_current_value_aux (XEXP (exp, 0));
- if (cond == true_rtx)
- return simplify_with_current_value_aux (XEXP (exp, 1));
- else if (cond == false_rtx)
- return simplify_with_current_value_aux (XEXP (exp, 2));
- else
- return attr_rtx (IF_THEN_ELSE, cond,
- simplify_with_current_value_aux (XEXP (exp, 1)),
- simplify_with_current_value_aux (XEXP (exp, 2)));
+ /* Clear the ATTR_CURR_SIMPLIFIED_P flag everywhere relevant.
+ We use it to mean "already simplified for this insn". */
+ for (iv = insn_code_values[i]; iv; iv = iv->next)
+ clear_struct_flag (iv->av->value);
- case IOR:
- cond = simplify_with_current_value_aux (XEXP (exp, 1));
- if (cond == true_rtx)
- return cond;
- else if (cond == false_rtx)
- return simplify_with_current_value_aux (XEXP (exp, 0));
- else
- return attr_rtx (IOR, cond,
- simplify_with_current_value_aux (XEXP (exp, 0)));
+ for (iv = insn_code_values[i]; iv; iv = iv->next)
+ {
+ struct obstack *old = rtl_obstack;
- case AND:
- cond = simplify_with_current_value_aux (XEXP (exp, 1));
- if (cond == true_rtx)
- return simplify_with_current_value_aux (XEXP (exp, 0));
- else if (cond == false_rtx)
- return cond;
- else
- return attr_rtx (AND, cond,
- simplify_with_current_value_aux (XEXP (exp, 0)));
+ attr = iv->attr;
+ av = iv->av;
+ ie = iv->ie;
+ if (GET_CODE (av->value) != COND)
+ continue;
- case NOT:
- cond = simplify_with_current_value_aux (XEXP (exp, 0));
- if (cond == true_rtx)
- return false_rtx;
- else if (cond == false_rtx)
- return true_rtx;
- else
- return attr_rtx (NOT, cond);
+ rtl_obstack = temp_obstack;
+ newexp = av->value;
+ while (GET_CODE (newexp) == COND)
+ {
+ rtx newexp2 = simplify_cond (newexp, ie->def->insn_code,
+ ie->def->insn_index);
+ if (newexp2 == newexp)
+ break;
+ newexp = newexp2;
+ }
- case COND:
- for (i = 0; i < XVECLEN (exp, 0); i += 2)
- {
- cond = simplify_with_current_value_aux (XVECEXP (exp, 0, i));
- if (cond == true_rtx)
- return simplify_with_current_value_aux (XVECEXP (exp, 0, i + 1));
- else if (cond == false_rtx)
- continue;
- else
- abort (); /* With all EQ_ATTR's of known value, a case should
- have been selected. */
+ rtl_obstack = old;
+ if (newexp != av->value)
+ {
+ newexp = attr_copy_rtx (newexp);
+ remove_insn_ent (av, ie);
+ av = get_attr_value (newexp, attr, ie->def->insn_code);
+ iv->av = av;
+ insert_insn_ent (av, ie);
+ }
}
- return simplify_with_current_value_aux (XEXP (exp, 1));
-
- default:
- abort ();
}
+
+ free (ivbuf);
+ free (insn_code_values - 2);
}
/* Clear the ATTR_CURR_SIMPLIFIED_P flag in EXP and its subexpressions. */
switch (code)
{
case REG:
- case QUEUED:
case CONST_INT:
case CONST_DOUBLE:
case CONST_VECTOR:
break;
default:
- abort ();
+ gcc_unreachable ();
}
}
delays = delay;
}
-/* Process a DEFINE_FUNCTION_UNIT.
-
- This gives information about a function unit contained in the CPU.
- We fill in a `struct function_unit_op' and a `struct function_unit'
- with information used later by `expand_unit'. */
-
-static void
-gen_unit (rtx def, int lineno)
-{
- struct function_unit *unit;
- struct function_unit_op *op;
- const char *name = XSTR (def, 0);
- int multiplicity = XINT (def, 1);
- int simultaneity = XINT (def, 2);
- rtx condexp = XEXP (def, 3);
- int ready_cost = MAX (XINT (def, 4), 1);
- int issue_delay = MAX (XINT (def, 5), 1);
-
- /* See if we have already seen this function unit. If so, check that
- the multiplicity and simultaneity values are the same. If not, make
- a structure for this function unit. */
- for (unit = units; unit; unit = unit->next)
- if (! strcmp (unit->name, name))
- {
- if (unit->multiplicity != multiplicity
- || unit->simultaneity != simultaneity)
- {
- message_with_line (lineno,
- "differing specifications given for function unit %s",
- unit->name);
- message_with_line (unit->first_lineno, "previous definition");
- have_error = 1;
- return;
- }
- break;
- }
-
- if (unit == 0)
- {
- unit = oballoc (sizeof (struct function_unit));
- unit->name = name;
- unit->multiplicity = multiplicity;
- unit->simultaneity = simultaneity;
- unit->issue_delay.min = unit->issue_delay.max = issue_delay;
- unit->num = num_units++;
- unit->num_opclasses = 0;
- unit->condexp = false_rtx;
- unit->ops = 0;
- unit->next = units;
- unit->first_lineno = lineno;
- units = unit;
- }
- else
- XSTR (def, 0) = unit->name;
-
- /* Make a new operation class structure entry and initialize it. */
- op = oballoc (sizeof (struct function_unit_op));
- op->condexp = condexp;
- op->num = unit->num_opclasses++;
- op->ready = ready_cost;
- op->issue_delay = issue_delay;
- op->next = unit->ops;
- op->lineno = lineno;
- unit->ops = op;
- num_unit_opclasses++;
-
- /* Set our issue expression based on whether or not an optional conflict
- vector was specified. */
- if (XVEC (def, 6))
- {
- /* Compute the IOR of all the specified expressions. */
- rtx orexp = false_rtx;
- int i;
-
- for (i = 0; i < XVECLEN (def, 6); i++)
- orexp = insert_right_side (IOR, orexp, XVECEXP (def, 6, i), -2, -2);
-
- op->conflict_exp = orexp;
- extend_range (&unit->issue_delay, 1, issue_delay);
- }
- else
- {
- op->conflict_exp = true_rtx;
- extend_range (&unit->issue_delay, issue_delay, issue_delay);
- }
-
- /* Merge our conditional into that of the function unit so we can determine
- which insns are used by the function unit. */
- unit->condexp = insert_right_side (IOR, unit->condexp, op->condexp, -2, -2);
-}
-
/* Given a piece of RTX, print a C expression to test its truth value.
We use AND and IOR both for logical and bit-wise operations, so
interpret them as logical unless they are inside a comparison expression.
printf (" >> ");
break;
default:
- abort ();
+ gcc_unreachable ();
}
write_test_expr (XEXP (exp, 1), flags | comparison_operator);
printf ("-");
break;
default:
- abort ();
+ gcc_unreachable ();
}
write_test_expr (XEXP (exp, 0), flags);
}
attr = find_attr (&XSTR (exp, 0), 0);
- if (! attr)
- abort ();
+ gcc_assert (attr);
/* Now is the time to expand the value of a constant attribute. */
if (attr->is_const)
/* A random C expression. */
case SYMBOL_REF:
- printf ("%s", XSTR (exp, 0));
+ print_c_condition (XSTR (exp, 0));
break;
/* The address of the branch target. */
for (av = attr->first_value; av; av = av->next)
if (av->num_insns != 0)
write_attr_set (attr, 2, av->value, "return", ";",
- true_rtx, av->first_insn->insn_code,
- av->first_insn->insn_index);
+ true_rtx, av->first_insn->def->insn_code,
+ av->first_insn->def->insn_index);
printf ("}\n\n");
return;
}
printf ("{\n");
+ printf (" switch (recog_memoized (insn))\n");
+ printf (" {\n");
- if (GET_CODE (common_av->value) == FFS)
- {
- rtx p = XEXP (common_av->value, 0);
-
- /* No need to emit code to abort if the insn is unrecognized; the
- other get_attr_foo functions will do that when we call them. */
-
- write_toplevel_expr (p);
-
- printf ("\n if (accum && accum == (accum & -accum))\n");
- printf (" {\n");
- printf (" int i;\n");
- printf (" for (i = 0; accum >>= 1; ++i) continue;\n");
- printf (" accum = i;\n");
- printf (" }\n else\n");
- printf (" accum = ~accum;\n");
- printf (" return accum;\n}\n\n");
- }
- else
- {
- printf (" switch (recog_memoized (insn))\n");
- printf (" {\n");
-
- for (av = attr->first_value; av; av = av->next)
- if (av != common_av)
- write_attr_case (attr, av, 1, "return", ";", 4, true_rtx);
+ for (av = attr->first_value; av; av = av->next)
+ if (av != common_av)
+ write_attr_case (attr, av, 1, "return", ";", 4, true_rtx);
- write_attr_case (attr, common_av, 0, "return", ";", 4, true_rtx);
- printf (" }\n}\n\n");
- }
+ write_attr_case (attr, common_av, 0, "return", ";", 4, true_rtx);
+ printf (" }\n}\n\n");
}
/* Given an AND tree of known true terms (because we are inside an `if' with
}
}
+/* Write a series of case statements for every instruction in list IE.
+ INDENT is the amount of indentation to write before each case. */
+
+static void
+write_insn_cases (struct insn_ent *ie, int indent)
+{
+ for (; ie != 0; ie = ie->next)
+ if (ie->def->insn_code != -1)
+ {
+ write_indent (indent);
+ if (GET_CODE (ie->def->def) == DEFINE_PEEPHOLE)
+ printf ("case %d: /* define_peephole, line %d */\n",
+ ie->def->insn_code, ie->def->lineno);
+ else
+ printf ("case %d: /* %s */\n",
+ ie->def->insn_code, XSTR (ie->def->def, 0));
+ }
+}
+
/* Write out the computation for one attribute value. */
static void
int write_case_lines, const char *prefix, const char *suffix,
int indent, rtx known_true)
{
- struct insn_ent *ie;
-
if (av->num_insns == 0)
return;
}
if (write_case_lines)
- {
- for (ie = av->first_insn; ie; ie = ie->next)
- if (ie->insn_code != -1)
- {
- write_indent (indent);
- printf ("case %d:\n", ie->insn_code);
- }
- }
+ write_insn_cases (av->first_insn, indent);
else
{
write_indent (indent);
}
write_attr_set (attr, indent + 2, av->value, prefix, suffix,
- known_true, av->first_insn->insn_code,
- av->first_insn->insn_index);
+ known_true, av->first_insn->def->insn_code,
+ av->first_insn->def->insn_index);
if (strncmp (prefix, "return", 6))
{
return 0;
}
-/* Evaluate an expression at top level. A front end to write_test_expr,
- in which we cache attribute values and break up excessively large
- expressions to cater to older compilers. */
-
-static void
-write_toplevel_expr (rtx p)
-{
- struct attr_desc *attr;
- int i;
-
- for (i = 0; i < MAX_ATTRS_INDEX; ++i)
- for (attr = attrs[i]; attr; attr = attr->next)
- if (!attr->is_const)
- write_expr_attr_cache (p, attr);
-
- printf (" unsigned long accum = 0;\n\n");
-
- while (GET_CODE (p) == IOR)
- {
- rtx e;
- if (GET_CODE (XEXP (p, 0)) == IOR)
- e = XEXP (p, 1), p = XEXP (p, 0);
- else
- e = XEXP (p, 0), p = XEXP (p, 1);
-
- printf (" accum |= ");
- write_test_expr (e, 3);
- printf (";\n");
- }
- printf (" accum |= ");
- write_test_expr (p, 3);
- printf (";\n");
-}
-
-/* Utilities to write names in various forms. */
-
-static void
-write_unit_name (const char *prefix, int num, const char *suffix)
-{
- struct function_unit *unit;
-
- for (unit = units; unit; unit = unit->next)
- if (unit->num == num)
- {
- printf ("%s%s%s", prefix, unit->name, suffix);
- return;
- }
-
- printf ("%s<unknown>%s", prefix, suffix);
-}
+/* Utilities to write in various forms. */
static void
write_attr_valueq (struct attr_desc *attr, const char *s)
printf ("%d", num);
- /* Make the blockage range values and function units used values easier
- to read. */
- if (attr->func_units_p)
- {
- if (num == -1)
- printf (" /* units: none */");
- else if (num >= 0)
- write_unit_name (" /* units: ", num, " */");
- else
- {
- int i;
- const char *sep = " /* units: ";
- for (i = 0, num = ~num; num; i++, num >>= 1)
- if (num & 1)
- {
- write_unit_name (sep, i, (num == 1) ? " */" : "");
- sep = ", ";
- }
- }
- }
-
- else if (attr->blockage_p)
- printf (" /* min %d, max %d */", num >> (HOST_BITS_PER_INT / 2),
- num & ((1 << (HOST_BITS_PER_INT / 2)) - 1));
-
- else if (num > 9 || num < 0)
+ if (num > 9 || num < 0)
printf (" /* 0x%x */", num);
}
else
break;
case SYMBOL_REF:
- fputs (XSTR (value, 0), stdout);
+ print_c_condition (XSTR (value, 0));
break;
case ATTR:
break;
default:
- abort ();
+ gcc_unreachable ();
}
}
printf ("{\n");
printf (" rtx insn;\n");
printf ("\n");
- printf (" if (slot >= %d)\n", max_slots);
- printf (" abort ();\n");
+ printf (" gcc_assert (slot < %d);\n", max_slots);
printf ("\n");
/* Allow dbr_schedule to pass labels, etc. This can happen if try_split
converts a compound instruction into a loop. */
if (num_delays > 1)
{
attr = find_attr (&delay_type_str, 0);
- if (! attr)
- abort ();
+ gcc_assert (attr);
common_av = find_most_used (attr);
printf (" insn = delay_insn;\n");
printf (" }\n\n");
/* Ensure matched. Otherwise, shouldn't have been called. */
- printf (" if (slot < %d)\n", max_slots);
- printf (" abort ();\n\n");
+ printf (" gcc_assert (slot >= %d);\n\n", max_slots);
}
/* If just one type of delay slot, write simple switch. */
printf (" {\n");
attr = find_attr (&delay_1_0_str, 0);
- if (! attr)
- abort ();
+ gcc_assert (attr);
common_av = find_most_used (attr);
for (av = attr->first_value; av; av = av->next)
sprintf (str, "*%s_%d_%d", kind, delay->num, i / 3);
pstr = str;
attr = find_attr (&pstr, 0);
- if (! attr)
- abort ();
+ gcc_assert (attr);
common_av = find_most_used (attr);
for (av = attr->first_value; av; av = av->next)
}
printf (" default:\n");
- printf (" abort ();\n");
+ printf (" gcc_unreachable ();\n");
printf (" }\n");
}
printf ("}\n\n");
}
-/* Write routines to compute conflict cost for function units. Then write a
- table describing the available function units. */
-
-static void
-write_function_unit_info (void)
-{
- struct function_unit *unit;
- int i;
-
- /* Write out conflict routines for function units. Don't bother writing
- one if there is only one issue delay value. */
-
- for (unit = units; unit; unit = unit->next)
- {
- if (unit->needs_blockage_function)
- write_complex_function (unit, "blockage", "block");
-
- /* If the minimum and maximum conflict costs are the same, there
- is only one value, so we don't need a function. */
- if (! unit->needs_conflict_function)
- {
- unit->default_cost = make_numeric_value (unit->issue_delay.max);
- continue;
- }
-
- /* The function first computes the case from the candidate insn. */
- unit->default_cost = make_numeric_value (0);
- write_complex_function (unit, "conflict_cost", "cost");
- }
-
- /* Now that all functions have been written, write the table describing
- the function units. The name is included for documentation purposes
- only. */
-
- printf ("const struct function_unit_desc function_units[] = {\n");
-
- /* Write out the descriptions in numeric order, but don't force that order
- on the list. Doing so increases the runtime of genattrtab.c. */
- for (i = 0; i < num_units; i++)
- {
- for (unit = units; unit; unit = unit->next)
- if (unit->num == i)
- break;
-
- printf (" {\"%s\", %d, %d, %d, %s, %d, %s_unit_ready_cost, ",
- unit->name, 1 << unit->num, unit->multiplicity,
- unit->simultaneity, XSTR (unit->default_cost, 0),
- unit->issue_delay.max, unit->name);
-
- if (unit->needs_conflict_function)
- printf ("%s_unit_conflict_cost, ", unit->name);
- else
- printf ("0, ");
-
- printf ("%d, ", unit->max_blockage);
-
- if (unit->needs_range_function)
- printf ("%s_unit_blockage_range, ", unit->name);
- else
- printf ("0, ");
-
- if (unit->needs_blockage_function)
- printf ("%s_unit_blockage", unit->name);
- else
- printf ("0");
-
- printf ("}, \n");
- }
-
- if (num_units == 0)
- printf ("{\"dummy\", 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} /* a dummy element */");
- printf ("};\n\n");
-}
-
-static void
-write_complex_function (struct function_unit *unit,
- const char *name,
- const char *connection)
-{
- struct attr_desc *case_attr, *attr;
- struct attr_value *av, *common_av;
- rtx value;
- char str[256];
- const char *pstr;
- int using_case;
- int i;
-
- printf ("static int\n");
- printf ("%s_unit_%s (rtx executing_insn, rtx candidate_insn)\n",
- unit->name, name);
- printf ("{\n");
- printf (" rtx insn;\n");
- printf (" int casenum;\n\n");
- printf (" insn = executing_insn;\n");
- printf (" switch (recog_memoized (insn))\n");
- printf (" {\n");
-
- /* Write the `switch' statement to get the case value. */
- if (strlen (unit->name) + sizeof "*_cases" > 256)
- abort ();
- sprintf (str, "*%s_cases", unit->name);
- pstr = str;
- case_attr = find_attr (&pstr, 0);
- if (! case_attr)
- abort ();
- common_av = find_most_used (case_attr);
-
- for (av = case_attr->first_value; av; av = av->next)
- if (av != common_av)
- write_attr_case (case_attr, av, 1,
- "casenum =", ";", 4, unit->condexp);
-
- write_attr_case (case_attr, common_av, 0,
- "casenum =", ";", 4, unit->condexp);
- printf (" }\n\n");
-
- /* Now write an outer switch statement on each case. Then write
- the tests on the executing function within each. */
- printf (" insn = candidate_insn;\n");
- printf (" switch (casenum)\n");
- printf (" {\n");
-
- for (i = 0; i < unit->num_opclasses; i++)
- {
- /* Ensure using this case. */
- using_case = 0;
- for (av = case_attr->first_value; av; av = av->next)
- if (av->num_insns
- && contained_in_p (make_numeric_value (i), av->value))
- using_case = 1;
-
- if (! using_case)
- continue;
-
- printf (" case %d:\n", i);
- sprintf (str, "*%s_%s_%d", unit->name, connection, i);
- pstr = str;
- attr = find_attr (&pstr, 0);
- if (! attr)
- abort ();
-
- /* If single value, just write it. */
- value = find_single_value (attr);
- if (value)
- write_attr_set (attr, 6, value, "return", ";\n", true_rtx, -2, -2);
- else
- {
- common_av = find_most_used (attr);
- printf (" switch (recog_memoized (insn))\n");
- printf ("\t{\n");
-
- for (av = attr->first_value; av; av = av->next)
- if (av != common_av)
- write_attr_case (attr, av, 1,
- "return", ";", 8, unit->condexp);
-
- write_attr_case (attr, common_av, 0,
- "return", ";", 8, unit->condexp);
- printf (" }\n\n");
- }
- }
-
- /* This default case should not be needed, but gcc's analysis is not
- good enough to realize that the default case is not needed for the
- second switch statement. */
- printf (" default:\n abort ();\n");
- printf (" }\n}\n\n");
-}
-
/* This page contains miscellaneous utility routines. */
/* Given a pointer to a (char *), return a malloc'ed string containing the
attr->name = DEF_ATTR_STRING (name);
attr->first_value = attr->default_val = NULL;
attr->is_numeric = attr->negative_ok = attr->is_const = attr->is_special = 0;
- attr->unsigned_p = attr->func_units_p = attr->blockage_p = attr->static_p = 0;
+ attr->unsigned_p = attr->static_p = 0;
attr->next = attrs[index];
attrs[index] = attr;
struct attr_desc *attr;
attr = find_attr (&name, 1);
- if (attr->default_val)
- abort ();
+ gcc_assert (!attr->default_val);
attr->is_numeric = 1;
attr->is_const = 0;
attr->is_special = (special & ATTR_SPECIAL) != 0;
attr->negative_ok = (special & ATTR_NEGATIVE_OK) != 0;
attr->unsigned_p = (special & ATTR_UNSIGNED) != 0;
- attr->func_units_p = (special & ATTR_FUNC_UNITS) != 0;
- attr->blockage_p = (special & ATTR_BLOCKAGE) != 0;
attr->static_p = (special & ATTR_STATIC) != 0;
attr->default_val = get_attr_value (value, attr, -2);
}
return most_used;
}
-/* If an attribute only has a single value used, return it. Otherwise
- return NULL. */
-
-static rtx
-find_single_value (struct attr_desc *attr)
-{
- struct attr_value *av;
- rtx unique_value;
-
- unique_value = NULL;
- for (av = attr->first_value; av; av = av->next)
- if (av->num_insns)
- {
- if (unique_value)
- return NULL;
- else
- unique_value = av->value;
- }
-
- return unique_value;
-}
-
/* Return (attr_value "n") */
rtx
rtx exp;
char *p;
- if (n < 0)
- abort ();
+ gcc_assert (n >= 0);
if (n < 20 && int_values[n])
return int_values[n];
return exp;
}
-static void
-extend_range (struct range *range, int min, int max)
-{
- if (range->min > min)
- range->min = min;
- if (range->max < max)
- range->max = max;
-}
-
static rtx
copy_rtx_unchanging (rtx orig)
{
{
struct attr_desc *attr = find_attr (&num_delay_slots_str, 0);
struct attr_value *av;
- struct insn_ent *ie;
if (attr)
{
length_used = 0;
walk_attr_value (av->value);
if (length_used)
- {
- for (ie = av->first_insn; ie; ie = ie->next)
- if (ie->insn_code != -1)
- printf (" case %d:\n", ie->insn_code);
- printf (" return 0;\n");
- }
+ write_insn_cases (av->first_insn, 4);
}
printf (" default:\n");
progname = "genattrtab";
- if (argc <= 1)
- fatal ("no input file name");
-
if (init_md_reader_args (argc, argv) != SUCCESS_EXIT_CODE)
return (FATAL_EXIT_CODE);
gen_delay (desc, lineno);
break;
- case DEFINE_FUNCTION_UNIT:
- gen_unit (desc, lineno);
- break;
-
case DEFINE_CPU_UNIT:
gen_cpu_unit (desc);
break;
if (num_delays)
expand_delays ();
- if (num_units || num_dfa_decls)
- {
- /* Expand DEFINE_FUNCTION_UNIT information into new attributes. */
- expand_units ();
- /* Build DFA, output some functions and expand DFA information
- into new attributes. */
- expand_automata ();
- }
+ /* Build DFA, output some functions and expand DFA information
+ to new attributes. */
+ if (num_dfa_decls)
+ expand_automata ();
printf ("#include \"config.h\"\n");
printf ("#include \"system.h\"\n");
optimize_attrs ();
/* Now write out all the `gen_attr_...' routines. Do these before the
- special routines (specifically before write_function_unit_info), so
- that they get defined before they are used. */
+ special routines so that they get defined before they are used. */
for (i = 0; i < MAX_ATTRS_INDEX; i++)
for (attr = attrs[i]; attr; attr = attr->next)
write_eligible_delay ("annul_false");
}
- if (num_units || num_dfa_decls)
- {
- /* Write out information about function units. */
- write_function_unit_info ();
- /* Output code for pipeline hazards recognition based on DFA
- (deterministic finite state automata. */
- write_automata ();
- }
+ /* Output code for pipeline hazards recognition based on DFA
+ (deterministic finite-state automata). */
+ if (num_dfa_decls)
+ write_automata ();
/* Write out constant delay slot info. */
write_const_num_delay_slots ();
OSDN Git Service
