/* Compiler driver program that can handle many languages.
Copyright (C) 1987, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
+ 2010
Free Software Foundation, Inc.
This file is part of GCC.
Once it knows which kind of compilation to perform, the procedure for
compilation is specified by a string called a "spec". */
-/* A Short Introduction to Adding a Command-Line Option.
-
- Before adding a command-line option, consider if it is really
- necessary. Each additional command-line option adds complexity and
- is difficult to remove in subsequent versions.
-
- In the following, consider adding the command-line argument
- `--bar'.
-
- 1. Each command-line option is specified in the specs file. The
- notation is described below in the comment entitled "The Specs
- Language". Read it.
-
- 2. In this file, add an entry to "option_map" equating the long
- `--' argument version and any shorter, single letter version. Read
- the comments in the declaration of "struct option_map" for an
- explanation. Do not omit the first `-'.
-
- 3. Look in the "specs" file to determine which program or option
- list should be given the argument, e.g., "cc1_options". Add the
- appropriate syntax for the shorter option version to the
- corresponding "const char *" entry in this file. Omit the first
- `-' from the option. For example, use `-bar', rather than `--bar'.
-
- 4. If the argument takes an argument, e.g., `--baz argument1',
- modify either DEFAULT_SWITCH_TAKES_ARG or
- DEFAULT_WORD_SWITCH_TAKES_ARG in gcc.h. Omit the first `-'
- from `--baz'.
-
- 5. Document the option in this file's display_help(). If the
- option is passed to a subprogram, modify its corresponding
- function, e.g., cppinit.c:print_help() or toplev.c:display_help(),
- instead.
-
- 6. Compile and test. Make sure that your new specs file is being
- read. For example, use a debugger to investigate the value of
- "specs_file" in main(). */
-
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "intl.h"
#include "prefix.h"
#include "gcc.h"
+#include "diagnostic.h"
#include "flags.h"
#include "opts.h"
+#include "vec.h"
+
+#ifdef HAVE_MMAP_FILE
+# include <sys/mman.h>
+# ifdef HAVE_MINCORE
+/* This is on Solaris. */
+# include <sys/types.h>
+# endif
+#endif
+
+#ifndef MAP_FAILED
+# define MAP_FAILED ((void *)-1)
+#endif
/* By default there is no special suffix for target executables. */
/* FIXME: when autoconf is fixed, remove the host check - dj */
/* Flag set to nonzero if an @file argument has been supplied to gcc. */
static bool at_file_supplied;
-/* Flag saying to pass the greatest exit code returned by a sub-process
- to the calling program. */
-static int pass_exit_codes;
-
/* Definition of string containing the arguments given to configure. */
#include "configargs.h"
-/* Flag saying to print the directories gcc will search through looking for
- programs, libraries, etc. */
-
-static int print_search_dirs;
-
-/* Flag saying to print the full filename of this file
- as found through our usual search mechanism. */
-
-static const char *print_file_name = NULL;
-
-/* As print_file_name, but search for executable file. */
-
-static const char *print_prog_name = NULL;
-
-/* Flag saying to print the relative path we'd use to
- find libgcc.a given the current compiler flags. */
-
-static int print_multi_directory;
-
-static int print_sysroot;
-
-/* Flag saying to print the relative path we'd use to
- find OS libraries given the current compiler flags. */
-
-static int print_multi_os_directory;
-
-/* Flag saying to print the list of subdirectories and
- compiler flags used to select them in a standard form. */
-
-static int print_multi_lib;
-
/* Flag saying to print the command line options understood by gcc and its
sub-processes. */
static int print_help_list;
-/* Flag saying to print the sysroot suffix used for searching for
- headers. */
+/* Flag saying to print the version of gcc and its sub-processes. */
-static int print_sysroot_headers_suffix;
-
-/* Flag indicating whether we should print the command and arguments */
-
-static int verbose_flag;
+static int print_version;
/* Flag indicating whether we should ONLY print the command and
arguments (like verbose_flag) without executing the command.
static int print_subprocess_help;
-/* Flag indicating whether we should report subprocess execution times
- (if this is supported by the system - see pexecute.c). */
+/* Whether we should report subprocess execution times to a file. */
-static int report_times;
+FILE *report_times_to_file = NULL;
/* Nonzero means place this string before uses of /, so that include
and library files can be found in an alternate location. */
static char *save_temps_prefix = 0;
static size_t save_temps_length = 0;
-/* Nonzero means pass multiple source files to the compiler at one time. */
-
-static int combine_flag = 0;
-
-/* Nonzero means use pipes to communicate between subprocesses.
- Overridden by either of the above two flags. */
-
-static int use_pipes;
-
/* The compiler version. */
static const char *compiler_version;
-/* The target version specified with -V */
+/* The target version. */
static const char *const spec_version = DEFAULT_TARGET_VERSION;
-/* The target machine specified with -b. */
+/* The target machine. */
static const char *spec_machine = DEFAULT_TARGET_MACHINE;
static const char *cross_compile = "0";
#endif
-#ifdef MODIFY_TARGET_NAME
-
-/* Information on how to alter the target name based on a command-line
- switch. The only case we support now is simply appending or deleting a
- string to or from the end of the first part of the configuration name. */
-
-static const struct modify_target
-{
- const char *const sw;
- const enum add_del {ADD, DELETE} add_del;
- const char *const str;
-}
-modify_target[] = MODIFY_TARGET_NAME;
-#endif
-
-/* The number of errors that have occurred; the link phase will not be
- run if this is nonzero. */
-static int error_count = 0;
-
/* Greatest exit code of sub-processes that has been encountered up to
now. */
static int greatest_status = 1;
static struct obstack collect_obstack;
-/* This is a list of a wrapper program and its arguments.
- e.g. wrapper_string of "strace,-c"
- will cause all programs to run as
- strace -c program arguments
- instead of just
- program arguments */
-static const char *wrapper_string;
-
/* Forward declaration for prototypes. */
struct path_prefix;
struct prefix_list;
int, int, int);
static void add_sysrooted_prefix (struct path_prefix *, const char *,
const char *, int, int, int);
-static void translate_options (int *, const char *const **);
static char *skip_whitespace (char *);
static void delete_if_ordinary (const char *);
static void delete_temp_files (void);
static void set_multilib_dir (void);
static void print_multilib_info (void);
static void perror_with_name (const char *);
-static void fatal_ice (const char *, ...) ATTRIBUTE_PRINTF_1 ATTRIBUTE_NORETURN;
-static void notice (const char *, ...) ATTRIBUTE_PRINTF_1;
static void display_help (void);
static void add_preprocessor_option (const char *, int);
static void add_assembler_option (const char *, int);
static void add_linker_option (const char *, int);
-static void process_command (int, const char **);
+static void process_command (unsigned int, struct cl_decoded_option *);
static int execute (void);
static void alloc_args (void);
static void clear_args (void);
-static void fatal_error (int);
+static void fatal_signal (int);
#if defined(ENABLE_SHARED_LIBGCC) && !defined(REAL_LIBGCC_SPEC)
static void init_gcc_specs (struct obstack *, const char *, const char *,
const char *);
static const char *if_exists_spec_function (int, const char **);
static const char *if_exists_else_spec_function (int, const char **);
static const char *replace_outfile_spec_function (int, const char **);
+static const char *remove_outfile_spec_function (int, const char **);
static const char *version_compare_spec_function (int, const char **);
static const char *include_spec_function (int, const char **);
+static const char *find_file_spec_function (int, const char **);
+static const char *find_plugindir_spec_function (int, const char **);
static const char *print_asm_header_spec_function (int, const char **);
+static const char *compare_debug_dump_opt_spec_function (int, const char **);
+static const char *compare_debug_self_opt_spec_function (int, const char **);
+static const char *compare_debug_auxbase_opt_spec_function (int, const char **);
+static const char *pass_through_libs_spec_func (int, const char **);
\f
/* The Specs Language
%b substitute the basename of the input file being processed.
This is the substring up to (and not including) the last period
and not including the directory unless -save-temps was specified
- to put temporaries in a different location.
+ to put temporaries in a different location.
%B same as %b, but include the file suffix (text after the last period).
%gSUFFIX
substitute a file name that has suffix SUFFIX and is chosen
it is subsequently output with %*. SUFFIX is terminated by the next
space or %.
%d marks the argument containing or following the %d as a
- temporary file name, so that that file will be deleted if CC exits
+ temporary file name, so that that file will be deleted if GCC exits
successfully. Unlike %g, this contributes no text to the argument.
%w marks the argument containing or following the %w as the
"output file" of this compilation. This puts the argument
argument vector in the usual fashion. The function returns
a string which is processed as if it had appeared literally
as part of the current spec.
- %{S} substitutes the -S switch, if that switch was given to CC.
+ %{S} substitutes the -S switch, if that switch was given to GCC.
If that switch was not specified, this substitutes nothing.
Here S is a metasyntactic variable.
- %{S*} substitutes all the switches specified to CC whose names start
+ %{S*} substitutes all the switches specified to GCC whose names start
with -S. This is used for -o, -I, etc; switches that take
- arguments. CC considers `-o foo' as being one switch whose
+ arguments. GCC considers `-o foo' as being one switch whose
name starts with `o'. %{o*} would substitute this text,
including the space; thus, two arguments would be generated.
%{S*&T*} likewise, but preserve order of S and T options (the order
of ampersand-separated variables; for each the wild card is
optional. Useful for CPP as %{D*&U*&A*}.
- %{S:X} substitutes X, if the -S switch was given to CC.
- %{!S:X} substitutes X, if the -S switch was NOT given to CC.
+ %{S:X} substitutes X, if the -S switch was given to GCC.
+ %{!S:X} substitutes X, if the -S switch was NOT given to GCC.
%{S*:X} substitutes X if one or more switches whose names start
- with -S was given to CC. Normally X is substituted only
+ with -S was given to GCC. Normally X is substituted only
once, no matter how many such switches appeared. However,
if %* appears somewhere in X, then X will be substituted
once for each matching switch, with the %* replaced by the
%{!.S:X} substitutes X, if NOT processing a file with suffix S.
%{,S:X} substitutes X, if processing a file which will use spec S.
%{!,S:X} substitutes X, if NOT processing a file which will use spec S.
-
- %{S|T:X} substitutes X if either -S or -T was given to CC. This may be
+
+ %{S|T:X} substitutes X if either -S or -T was given to GCC. This may be
combined with '!', '.', ',', and '*' as above binding stronger
than the OR.
If %* appears in X, all of the alternatives must be starred, and
only the first matching alternative is substituted.
- %{S:X; if S was given to CC, substitutes X;
- T:Y; else if T was given to CC, substitutes Y;
+ %{S:X; if S was given to GCC, substitutes X;
+ T:Y; else if T was given to GCC, substitutes Y;
:D} else substitutes D. There can be as many clauses as you need.
This may be combined with '.', '!', ',', '|', and '*' as above.
that a command should be piped to the following command, but only if -pipe
is specified.
-Note that it is built into CC which switches take arguments and which
+Note that it is built into GCC which switches take arguments and which
do not. You might think it would be useful to generalize this to
allow each compiler's spec to say which switches take arguments. But
-this cannot be done in a consistent fashion. CC cannot even decide
+this cannot be done in a consistent fashion. GCC cannot even decide
which input files have been specified without knowing which switches
take arguments, and it must know which input files to compile in order
to tell which compilers to run.
-CC also knows implicitly that arguments starting in `-l' are to be
+GCC also knows implicitly that arguments starting in `-l' are to be
treated as compiler output files, and passed to the linker in their
proper position among the other output files. */
\f
#define MFLIB_SPEC "%{fmudflap|fmudflapth: -export-dynamic}"
#endif
+/* When using -fsplit-stack we need to wrap pthread_create, in order
+ to initialize the stack guard. We always use wrapping, rather than
+ shared library ordering, and we keep the wrapper function in
+ libgcc. This is not yet a real spec, though it could become one;
+ it is currently just stuffed into LINK_SPEC. FIXME: This wrapping
+ only works with GNU ld and gold. FIXME: This is incompatible with
+ -fmudflap when linking statically, which wants to do its own
+ wrapping. */
+#define STACK_SPLIT_SPEC " %{fsplit-stack: --wrap=pthread_create}"
+
/* config.h can define LIBGCC_SPEC to override how and when libgcc.a is
included. */
#ifndef LIBGCC_SPEC
"%{!shared:%{pg:gcrt0%O%s}%{!pg:%{p:mcrt0%O%s}%{!p:crt0%O%s}}}"
#endif
-/* config.h can define SWITCHES_NEED_SPACES to control which options
- require spaces between the option and the argument. */
-#ifndef SWITCHES_NEED_SPACES
-#define SWITCHES_NEED_SPACES ""
-#endif
-
/* config.h can define ENDFILE_SPEC to override the default crtn files. */
#ifndef ENDFILE_SPEC
#define ENDFILE_SPEC ""
#endif
#endif
+#ifndef LINK_BUILDID_SPEC
+# if defined(HAVE_LD_BUILDID) && defined(ENABLE_LD_BUILDID)
+# define LINK_BUILDID_SPEC "%{!r:--build-id} "
+# endif
+#endif
+
+
/* -u* was put back because both BSD and SysV seem to support it. */
/* %{static:} simply prevents an error message if the target machine
doesn't handle -static. */
/* We want %{T*} after %{L*} and %D so that it can be used to specify linker
scripts which exist in user specified directories, or in standard
directories. */
+/* We pass any -flto flags on to the linker, which is expected
+ to understand them. In practice, this means it had better be collect2. */
#ifndef LINK_COMMAND_SPEC
#define LINK_COMMAND_SPEC "\
%{!fsyntax-only:%{!c:%{!M:%{!MM:%{!E:%{!S:\
- %(linker) %l " LINK_PIE_SPEC "%X %{o*} %{A} %{d} %{e*} %{m} %{N} %{n} %{r}\
- %{s} %{t} %{u*} %{x} %{z} %{Z} %{!A:%{!nostdlib:%{!nostartfiles:%S}}}\
+ %(linker) \
+ %{fuse-linker-plugin: \
+ -plugin %(linker_plugin_file) \
+ -plugin-opt=%(lto_wrapper) \
+ -plugin-opt=-fresolution=%u.res \
+ %{!nostdlib:%{!nodefaultlibs:%:pass-through-libs(%(link_gcc_c_sequence))}} \
+ } \
+ %{flto*:%<fcompare-debug*} \
+ %{flto*} %l " LINK_PIE_SPEC \
+ "%X %{o*} %{A} %{d} %{e*} %{m} %{N} %{n} %{r}\
+ %{s} %{t} %{u*} %{z} %{Z} %{!A:%{!nostdlib:%{!nostartfiles:%S}}}\
%{static:} %{L*} %(mfwrap) %(link_libgcc) %o\
- %{fopenmp|ftree-parallelize-loops=*:%:include(libgomp.spec)%(link_gomp)} %(mflib)\
- %{fprofile-arcs|fprofile-generate|coverage:-lgcov}\
+ %{fopenmp|ftree-parallelize-loops=*:%:include(libgomp.spec)%(link_gomp)}\
+ %(mflib) " STACK_SPLIT_SPEC "\
+ %{fprofile-arcs|fprofile-generate*|coverage:-lgcov}\
%{!nostdlib:%{!nodefaultlibs:%(link_ssp) %(link_gcc_c_sequence)}}\
%{!A:%{!nostdlib:%{!nostartfiles:%E}}} %{T*} }}}}}}"
#endif
static const char *libgcc_spec = LIBGCC_SPEC;
static const char *endfile_spec = ENDFILE_SPEC;
static const char *startfile_spec = STARTFILE_SPEC;
-static const char *switches_need_spaces = SWITCHES_NEED_SPACES;
static const char *linker_name_spec = LINKER_NAME;
+static const char *linker_plugin_file_spec = "";
+static const char *lto_wrapper_spec = "";
+static const char *lto_gcc_spec = "";
static const char *link_command_spec = LINK_COMMAND_SPEC;
static const char *link_libgcc_spec = LINK_LIBGCC_SPEC;
static const char *startfile_prefix_spec = STARTFILE_PREFIX_SPEC;
therefore no dependency entry, confuses make into thinking a .o
file that happens to exist is up-to-date. */
static const char *cpp_unique_options =
-"%{C|CC:%{!E:%eGCC does not support -C or -CC without -E}}\
- %{!Q:-quiet} %{nostdinc*} %{C} %{CC} %{v} %{I*&F*} %{P} %I\
+"%{!Q:-quiet} %{nostdinc*} %{C} %{CC} %{v} %{I*&F*} %{P} %I\
%{MD:-MD %{!o:%b.d}%{o*:%.d%*}}\
%{MMD:-MMD %{!o:%b.d}%{o*:%.d%*}}\
%{M} %{MM} %{MF*} %{MG} %{MP} %{MQ*} %{MT*}\
%{!E:%{!M:%{!MM:%{!MT:%{!MQ:%{MD|MMD:%{o*:-MQ %*}}}}}}}\
%{remap} %{g3|ggdb3|gstabs3|gcoff3|gxcoff3|gvms3:-dD}\
+ %{!iplugindir*:%{fplugin*:%:find-plugindir()}}\
%{H} %C %{D*&U*&A*} %{i*} %Z %i\
%{fmudflap:-D_MUDFLAP -include mf-runtime.h}\
%{fmudflapth:-D_MUDFLAP -D_MUDFLAPTH -include mf-runtime.h}\
/* NB: This is shared amongst all front-ends, except for Ada. */
static const char *cc1_options =
"%{pg:%{fomit-frame-pointer:%e-pg and -fomit-frame-pointer are incompatible}}\
- %1 %{!Q:-quiet} -dumpbase %B %{d*} %{m*} %{a*}\
- %{c|S:%{o*:-auxbase-strip %*}%{!o*:-auxbase %b}}%{!c:%{!S:-auxbase %b}}\
+ %{!iplugindir*:%{fplugin*:%:find-plugindir()}}\
+ %1 %{!Q:-quiet} %{!dumpbase:-dumpbase %B} %{d*} %{m*} %{aux-info*}\
+ %{fcompare-debug-second:%:compare-debug-auxbase-opt(%b)} \
+ %{!fcompare-debug-second:%{c|S:%{o*:-auxbase-strip %*}%{!o*:-auxbase %b}}}%{!c:%{!S:-auxbase %b}} \
%{g*} %{O*} %{W*&pedantic*} %{w} %{std*&ansi&trigraphs}\
%{v:-version} %{pg:-p} %{p} %{f*} %{undef}\
- %{Qn:-fno-ident} %{--help:--help}\
- %{--target-help:--target-help}\
- %{--help=*:--help=%(VALUE)}\
+ %{Qn:-fno-ident} %{-help:--help}\
+ %{-target-help:--target-help}\
+ %{-version:--version}\
+ %{-help=*:--help=%*}\
%{!fsyntax-only:%{S:%W{o*}%{!o*:-o %b.s}}}\
%{fsyntax-only:-o %j} %{-param*}\
%{fmudflap|fmudflapth:-fno-builtin -fno-merge-constants}\
static const char *invoke_as =
#ifdef AS_NEEDS_DASH_FOR_PIPED_INPUT
-"%{!S:-o %|.s |\n as %(asm_options) %|.s %A }";
+"%{!fwpa:\
+ %{fcompare-debug=*|fdump-final-insns=*:%:compare-debug-dump-opt()}\
+ %{!S:-o %|.s |\n as %(asm_options) %|.s %A }\
+ }";
#else
-"%{!S:-o %|.s |\n as %(asm_options) %m.s %A }";
+"%{!fwpa:\
+ %{fcompare-debug=*|fdump-final-insns=*:%:compare-debug-dump-opt()}\
+ %{!S:-o %|.s |\n as %(asm_options) %m.s %A }\
+ }";
#endif
/* Some compilers have limits on line lengths, and the multilib_select
#endif
static const char *const driver_self_specs[] = {
- DRIVER_SELF_SPECS, GOMP_SELF_SPECS
+ "%{fdump-final-insns:-fdump-final-insns=.} %<fdump-final-insns",
+ DRIVER_SELF_SPECS, CONFIGURE_SPECS, GOMP_SELF_SPECS
};
#ifndef OPTION_DEFAULT_SPECS
static struct user_specs *user_specs_head, *user_specs_tail;
-#ifndef SWITCH_TAKES_ARG
-#define SWITCH_TAKES_ARG(CHAR) DEFAULT_SWITCH_TAKES_ARG(CHAR)
-#endif
-
-#ifndef WORD_SWITCH_TAKES_ARG
-#define WORD_SWITCH_TAKES_ARG(STR) DEFAULT_WORD_SWITCH_TAKES_ARG (STR)
-#endif
\f
-#ifdef HAVE_TARGET_EXECUTABLE_SUFFIX
-/* This defines which switches stop a full compilation. */
-#define DEFAULT_SWITCH_CURTAILS_COMPILATION(CHAR) \
- ((CHAR) == 'c' || (CHAR) == 'S')
-
-#ifndef SWITCH_CURTAILS_COMPILATION
-#define SWITCH_CURTAILS_COMPILATION(CHAR) \
- DEFAULT_SWITCH_CURTAILS_COMPILATION(CHAR)
-#endif
-#endif
-
/* Record the mapping from file suffixes for compilation specs. */
struct compiler
{".java", "#Java", 0, 0, 0}, {".class", "#Java", 0, 0, 0},
{".zip", "#Java", 0, 0, 0}, {".jar", "#Java", 0, 0, 0},
/* Next come the entries for C. */
- {".c", "@c", 0, 1, 1},
+ {".c", "@c", 0, 0, 1},
{"@c",
/* cc1 has an integrated ISO C preprocessor. We should invoke the
external preprocessor if -save-temps is given. */
%{!E:%{!M:%{!MM:\
%{traditional|ftraditional:\
%eGNU C no longer supports -traditional without -E}\
- %{!combine:\
- %{save-temps*|traditional-cpp|no-integrated-cpp:%(trad_capable_cpp) \
- %(cpp_options) -o %{save-temps*:%b.i} %{!save-temps*:%g.i} \n\
- cc1 -fpreprocessed %{save-temps*:%b.i} %{!save-temps*:%g.i} \
- %(cc1_options)}\
- %{!save-temps*:%{!traditional-cpp:%{!no-integrated-cpp:\
- cc1 %(cpp_unique_options) %(cc1_options)}}}\
- %{!fsyntax-only:%(invoke_as)}} \
- %{combine:\
- %{save-temps*|traditional-cpp|no-integrated-cpp:%(trad_capable_cpp) \
- %(cpp_options) -o %{save-temps*:%b.i} %{!save-temps*:%g.i}}\
- %{!save-temps*:%{!traditional-cpp:%{!no-integrated-cpp:\
- cc1 %(cpp_unique_options) %(cc1_options)}}\
- %{!fsyntax-only:%(invoke_as)}}}}}}", 0, 1, 1},
+ %{save-temps*|traditional-cpp|no-integrated-cpp:%(trad_capable_cpp) \
+ %(cpp_options) -o %{save-temps*:%b.i} %{!save-temps*:%g.i} \n\
+ cc1 -fpreprocessed %{save-temps*:%b.i} %{!save-temps*:%g.i} \
+ %(cc1_options)}\
+ %{!save-temps*:%{!traditional-cpp:%{!no-integrated-cpp:\
+ cc1 %(cpp_unique_options) %(cc1_options)}}}\
+ %{!fsyntax-only:%(invoke_as)}}}}", 0, 0, 1},
{"-",
"%{!E:%e-E or -x required when input is from standard input}\
%(trad_capable_cpp) %(cpp_options) %(cpp_debug_options)", 0, 0, 0},
%(cpp_options) -o %{save-temps*:%b.i} %{!save-temps*:%g.i} \n\
cc1 -fpreprocessed %{save-temps*:%b.i} %{!save-temps*:%g.i} \
%(cc1_options)\
- -o %g.s %{!o*:--output-pch=%i.gch}\
- %W{o*:--output-pch=%*}%V}\
+ %{!fdump-ada-spec*:-o %g.s %{!o*:--output-pch=%i.gch}\
+ %W{o*:--output-pch=%*}}%V}\
%{!save-temps*:%{!traditional-cpp:%{!no-integrated-cpp:\
cc1 %(cpp_unique_options) %(cc1_options)\
- -o %g.s %{!o*:--output-pch=%i.gch}\
- %W{o*:--output-pch=%*}%V}}}}}}", 0, 0, 0},
- {".i", "@cpp-output", 0, 1, 0},
+ %{!fdump-ada-spec*:-o %g.s %{!o*:--output-pch=%i.gch}\
+ %W{o*:--output-pch=%*}}%V}}}}}}", 0, 0, 0},
+ {".i", "@cpp-output", 0, 0, 0},
{"@cpp-output",
"%{!M:%{!MM:%{!E:cc1 -fpreprocessed %i %(cc1_options) %{!fsyntax-only:%(invoke_as)}}}}", 0, 1, 0},
{".s", "@assembler", 0, 1, 0},
static const int n_default_compilers = ARRAY_SIZE (default_compilers) - 1;
+typedef char *char_p; /* For DEF_VEC_P. */
+DEF_VEC_P(char_p);
+DEF_VEC_ALLOC_P(char_p,heap);
+
/* A vector of options to give to the linker.
These options are accumulated by %x,
and substituted into the linker command with %X. */
-static int n_linker_options;
-static char **linker_options;
+static VEC(char_p,heap) *linker_options;
/* A vector of options to give to the assembler.
These options are accumulated by -Wa,
and substituted into the assembler command with %Y. */
-static int n_assembler_options;
-static char **assembler_options;
+static VEC(char_p,heap) *assembler_options;
/* A vector of options to give to the preprocessor.
These options are accumulated by -Wp,
and substituted into the preprocessor command with %Z. */
-static int n_preprocessor_options;
-static char **preprocessor_options;
-\f
-/* Define how to map long options into short ones. */
-
-/* This structure describes one mapping. */
-struct option_map
-{
- /* The long option's name. */
- const char *const name;
- /* The equivalent short option. */
- const char *const equivalent;
- /* Argument info. A string of flag chars; NULL equals no options.
- a => argument required.
- o => argument optional.
- j => join argument to equivalent, making one word.
- * => require other text after NAME as an argument. */
- const char *const arg_info;
-};
-
-/* This is the table of mappings. Mappings are tried sequentially
- for each option encountered; the first one that matches, wins. */
-
-static const struct option_map option_map[] =
- {
- {"--all-warnings", "-Wall", 0},
- {"--ansi", "-ansi", 0},
- {"--assemble", "-S", 0},
- {"--assert", "-A", "a"},
- {"--classpath", "-fclasspath=", "aj"},
- {"--bootclasspath", "-fbootclasspath=", "aj"},
- {"--CLASSPATH", "-fclasspath=", "aj"},
- {"--combine", "-combine", 0},
- {"--comments", "-C", 0},
- {"--comments-in-macros", "-CC", 0},
- {"--compile", "-c", 0},
- {"--debug", "-g", "oj"},
- {"--define-macro", "-D", "aj"},
- {"--dependencies", "-M", 0},
- {"--dump", "-d", "a"},
- {"--dumpbase", "-dumpbase", "a"},
- {"--encoding", "-fencoding=", "aj"},
- {"--entry", "-e", 0},
- {"--extra-warnings", "-W", 0},
- {"--extdirs", "-fextdirs=", "aj"},
- {"--for-assembler", "-Wa", "a"},
- {"--for-linker", "-Xlinker", "a"},
- {"--force-link", "-u", "a"},
- {"--coverage", "-coverage", 0},
- {"--imacros", "-imacros", "a"},
- {"--include", "-include", "a"},
- {"--include-barrier", "-I-", 0},
- {"--include-directory", "-I", "aj"},
- {"--include-directory-after", "-idirafter", "a"},
- {"--include-prefix", "-iprefix", "a"},
- {"--include-with-prefix", "-iwithprefix", "a"},
- {"--include-with-prefix-before", "-iwithprefixbefore", "a"},
- {"--include-with-prefix-after", "-iwithprefix", "a"},
- {"--language", "-x", "a"},
- {"--library-directory", "-L", "a"},
- {"--machine", "-m", "aj"},
- {"--machine-", "-m", "*j"},
- {"--no-integrated-cpp", "-no-integrated-cpp", 0},
- {"--no-line-commands", "-P", 0},
- {"--no-precompiled-includes", "-noprecomp", 0},
- {"--no-standard-includes", "-nostdinc", 0},
- {"--no-standard-libraries", "-nostdlib", 0},
- {"--no-warnings", "-w", 0},
- {"--optimize", "-O", "oj"},
- {"--output", "-o", "a"},
- {"--output-class-directory", "-foutput-class-dir=", "ja"},
- {"--param", "--param", "a"},
- {"--pass-exit-codes", "-pass-exit-codes", 0},
- {"--pedantic", "-pedantic", 0},
- {"--pedantic-errors", "-pedantic-errors", 0},
- {"--pie", "-pie", 0},
- {"--pipe", "-pipe", 0},
- {"--prefix", "-B", "a"},
- {"--preprocess", "-E", 0},
- {"--print-search-dirs", "-print-search-dirs", 0},
- {"--print-file-name", "-print-file-name=", "aj"},
- {"--print-libgcc-file-name", "-print-libgcc-file-name", 0},
- {"--print-missing-file-dependencies", "-MG", 0},
- {"--print-multi-lib", "-print-multi-lib", 0},
- {"--print-multi-directory", "-print-multi-directory", 0},
- {"--print-multi-os-directory", "-print-multi-os-directory", 0},
- {"--print-prog-name", "-print-prog-name=", "aj"},
- {"--print-sysroot", "-print-sysroot", 0},
- {"--print-sysroot-headers-suffix", "-print-sysroot-headers-suffix", 0},
- {"--profile", "-p", 0},
- {"--profile-blocks", "-a", 0},
- {"--quiet", "-q", 0},
- {"--resource", "-fcompile-resource=", "aj"},
- {"--save-temps", "-save-temps", 0},
- {"--shared", "-shared", 0},
- {"--silent", "-q", 0},
- {"--specs", "-specs=", "aj"},
- {"--static", "-static", 0},
- {"--std", "-std=", "aj"},
- {"--symbolic", "-symbolic", 0},
- {"--sysroot", "--sysroot=", "aj"},
- {"--time", "-time", 0},
- {"--trace-includes", "-H", 0},
- {"--traditional", "-traditional", 0},
- {"--traditional-cpp", "-traditional-cpp", 0},
- {"--trigraphs", "-trigraphs", 0},
- {"--undefine-macro", "-U", "aj"},
- {"--user-dependencies", "-MM", 0},
- {"--verbose", "-v", 0},
- {"--warn-", "-W", "*j"},
- {"--write-dependencies", "-MD", 0},
- {"--write-user-dependencies", "-MMD", 0},
- {"--", "-f", "*j"}
- };
-\f
-
-#ifdef TARGET_OPTION_TRANSLATE_TABLE
-static const struct {
- const char *const option_found;
- const char *const replacements;
-} target_option_translations[] =
-{
- TARGET_OPTION_TRANSLATE_TABLE,
- { 0, 0 }
-};
-#endif
-
-/* Translate the options described by *ARGCP and *ARGVP.
- Make a new vector and store it back in *ARGVP,
- and store its length in *ARGCP. */
-
-static void
-translate_options (int *argcp, const char *const **argvp)
-{
- int i;
- int argc = *argcp;
- const char *const *argv = *argvp;
- int newvsize = (argc + 2) * 2 * sizeof (const char *);
- const char **newv = XNEWVAR (const char *, newvsize);
- int newindex = 0;
-
- i = 0;
- newv[newindex++] = argv[i++];
-
- while (i < argc)
- {
-#ifdef TARGET_OPTION_TRANSLATE_TABLE
- int tott_idx;
-
- for (tott_idx = 0;
- target_option_translations[tott_idx].option_found;
- tott_idx++)
- {
- if (strcmp (target_option_translations[tott_idx].option_found,
- argv[i]) == 0)
- {
- int spaces = 1;
- const char *sp;
- char *np;
-
- for (sp = target_option_translations[tott_idx].replacements;
- *sp; sp++)
- {
- if (*sp == ' ')
- spaces ++;
- }
-
- newvsize += spaces * sizeof (const char *);
- newv = XRESIZEVAR (const char *, newv, newvsize);
-
- sp = target_option_translations[tott_idx].replacements;
- np = xstrdup (sp);
-
- while (1)
- {
- while (*np == ' ')
- np++;
- if (*np == 0)
- break;
- newv[newindex++] = np;
- while (*np != ' ' && *np)
- np++;
- if (*np == 0)
- break;
- *np++ = 0;
- }
-
- i ++;
- break;
- }
- }
- if (target_option_translations[tott_idx].option_found)
- continue;
-#endif
-
- /* Translate -- options. */
- if (argv[i][0] == '-' && argv[i][1] == '-')
- {
- size_t j;
- /* Find a mapping that applies to this option. */
- for (j = 0; j < ARRAY_SIZE (option_map); j++)
- {
- size_t optlen = strlen (option_map[j].name);
- size_t arglen = strlen (argv[i]);
- size_t complen = arglen > optlen ? optlen : arglen;
- const char *arginfo = option_map[j].arg_info;
-
- if (arginfo == 0)
- arginfo = "";
-
- if (!strncmp (argv[i], option_map[j].name, complen))
- {
- const char *arg = 0;
-
- if (arglen < optlen)
- {
- size_t k;
- for (k = j + 1; k < ARRAY_SIZE (option_map); k++)
- if (strlen (option_map[k].name) >= arglen
- && !strncmp (argv[i], option_map[k].name, arglen))
- {
- error ("ambiguous abbreviation %s", argv[i]);
- break;
- }
-
- if (k != ARRAY_SIZE (option_map))
- break;
- }
-
- if (arglen > optlen)
- {
- /* If the option has an argument, accept that. */
- if (argv[i][optlen] == '=')
- arg = argv[i] + optlen + 1;
-
- /* If this mapping requires extra text at end of name,
- accept that as "argument". */
- else if (strchr (arginfo, '*') != 0)
- arg = argv[i] + optlen;
-
- /* Otherwise, extra text at end means mismatch.
- Try other mappings. */
- else
- continue;
- }
-
- else if (strchr (arginfo, '*') != 0)
- {
- error ("incomplete '%s' option", option_map[j].name);
- break;
- }
-
- /* Handle arguments. */
- if (strchr (arginfo, 'a') != 0)
- {
- if (arg == 0)
- {
- if (i + 1 == argc)
- {
- error ("missing argument to '%s' option",
- option_map[j].name);
- break;
- }
-
- arg = argv[++i];
- }
- }
- else if (strchr (arginfo, '*') != 0)
- ;
- else if (strchr (arginfo, 'o') == 0)
- {
- if (arg != 0)
- error ("extraneous argument to '%s' option",
- option_map[j].name);
- arg = 0;
- }
-
- /* Store the translation as one argv elt or as two. */
- if (arg != 0 && strchr (arginfo, 'j') != 0)
- newv[newindex++] = concat (option_map[j].equivalent, arg,
- NULL);
- else if (arg != 0)
- {
- newv[newindex++] = option_map[j].equivalent;
- newv[newindex++] = arg;
- }
- else
- newv[newindex++] = option_map[j].equivalent;
-
- break;
- }
- }
- i++;
- }
-
- /* Handle old-fashioned options--just copy them through,
- with their arguments. */
- else if (argv[i][0] == '-')
- {
- const char *p = argv[i] + 1;
- int c = *p;
- int nskip = 1;
-
- if (SWITCH_TAKES_ARG (c) > (p[1] != 0))
- nskip += SWITCH_TAKES_ARG (c) - (p[1] != 0);
- else if (WORD_SWITCH_TAKES_ARG (p))
- nskip += WORD_SWITCH_TAKES_ARG (p);
- else if ((c == 'B' || c == 'b' || c == 'x')
- && p[1] == 0)
- nskip += 1;
- else if (! strcmp (p, "Xlinker"))
- nskip += 1;
- else if (! strcmp (p, "Xpreprocessor"))
- nskip += 1;
- else if (! strcmp (p, "Xassembler"))
- nskip += 1;
-
- /* Watch out for an option at the end of the command line that
- is missing arguments, and avoid skipping past the end of the
- command line. */
- if (nskip + i > argc)
- nskip = argc - i;
-
- while (nskip > 0)
- {
- newv[newindex++] = argv[i++];
- nskip--;
- }
- }
- else
- /* Ordinary operands, or +e options. */
- newv[newindex++] = argv[i++];
- }
-
- newv[newindex] = 0;
-
- *argvp = newv;
- *argcp = newindex;
-}
+static VEC(char_p,heap) *preprocessor_options;
\f
static char *
skip_whitespace (char *p)
/* For native compilers, these are well-known paths containing
components that may be provided by the system. For cross
compilers, these paths are not used. */
-static const char *const standard_exec_prefix_1 = "/usr/libexec/gcc/";
-static const char *const standard_exec_prefix_2 = "/usr/lib/gcc/";
static const char *md_exec_prefix = MD_EXEC_PREFIX;
static const char *md_startfile_prefix = MD_STARTFILE_PREFIX;
static const char *md_startfile_prefix_1 = MD_STARTFILE_PREFIX_1;
INIT_STATIC_SPEC ("link_gomp", &link_gomp_spec),
INIT_STATIC_SPEC ("libgcc", &libgcc_spec),
INIT_STATIC_SPEC ("startfile", &startfile_spec),
- INIT_STATIC_SPEC ("switches_need_spaces", &switches_need_spaces),
INIT_STATIC_SPEC ("cross_compile", &cross_compile),
INIT_STATIC_SPEC ("version", &compiler_version),
INIT_STATIC_SPEC ("multilib", &multilib_select),
INIT_STATIC_SPEC ("multilib_exclusions", &multilib_exclusions),
INIT_STATIC_SPEC ("multilib_options", &multilib_options),
INIT_STATIC_SPEC ("linker", &linker_name_spec),
+ INIT_STATIC_SPEC ("linker_plugin_file", &linker_plugin_file_spec),
+ INIT_STATIC_SPEC ("lto_wrapper", <o_wrapper_spec),
+ INIT_STATIC_SPEC ("lto_gcc", <o_gcc_spec),
INIT_STATIC_SPEC ("link_libgcc", &link_libgcc_spec),
INIT_STATIC_SPEC ("md_exec_prefix", &md_exec_prefix),
INIT_STATIC_SPEC ("md_startfile_prefix", &md_startfile_prefix),
{ "if-exists", if_exists_spec_function },
{ "if-exists-else", if_exists_else_spec_function },
{ "replace-outfile", replace_outfile_spec_function },
+ { "remove-outfile", remove_outfile_spec_function },
{ "version-compare", version_compare_spec_function },
{ "include", include_spec_function },
+ { "find-file", find_file_spec_function },
+ { "find-plugindir", find_plugindir_spec_function },
{ "print-asm-header", print_asm_header_spec_function },
+ { "compare-debug-dump-opt", compare_debug_dump_opt_spec_function },
+ { "compare-debug-self-opt", compare_debug_self_opt_spec_function },
+ { "compare-debug-auxbase-opt", compare_debug_auxbase_opt_spec_function },
+ { "pass-through-libs", pass_through_libs_spec_func },
#ifdef EXTRA_SPEC_FUNCTIONS
EXTRA_SPEC_FUNCTIONS
#endif
return; /* Already initialized. */
if (verbose_flag)
- notice ("Using built-in specs.\n");
+ fnotice (stderr, "Using built-in specs.\n");
#ifdef EXTRA_SPECS
extra_specs = XCNEWVEC (struct spec_list, ARRAY_SIZE (extra_specs_1));
asm_spec = XOBFINISH (&obstack, const char *);
}
#endif
-#ifdef LINK_EH_SPEC
+
+#if defined LINK_EH_SPEC || defined LINK_BUILDID_SPEC
+# ifdef LINK_BUILDID_SPEC
+ /* Prepend LINK_BUILDID_SPEC to whatever link_spec we had before. */
+ obstack_grow (&obstack, LINK_BUILDID_SPEC, sizeof(LINK_BUILDID_SPEC) - 1);
+# endif
+# ifdef LINK_EH_SPEC
/* Prepend LINK_EH_SPEC to whatever link_spec we had before. */
obstack_grow (&obstack, LINK_EH_SPEC, sizeof(LINK_EH_SPEC) - 1);
+# endif
obstack_grow0 (&obstack, link_spec, strlen (link_spec));
link_spec = XOBFINISH (&obstack, const char *);
#endif
#ifdef DEBUG_SPECS
if (verbose_flag)
- notice ("Setting spec %s to '%s'\n\n", name, *(sl->ptr_spec));
+ fnotice (stderr, "Setting spec %s to '%s'\n\n", name, *(sl->ptr_spec));
#endif
/* Free the old spec. */
\f
/* Accumulate a command (program name and args), and run it. */
-/* Vector of pointers to arguments in the current line of specifications. */
-
-static const char **argbuf;
+typedef const char *const_char_p; /* For DEF_VEC_P. */
+DEF_VEC_P(const_char_p);
+DEF_VEC_ALLOC_P(const_char_p,heap);
-/* Number of elements allocated in argbuf. */
-
-static int argbuf_length;
-
-/* Number of elements in argbuf currently in use (containing args). */
+/* Vector of pointers to arguments in the current line of specifications. */
-static int argbuf_index;
+static VEC(const_char_p,heap) *argbuf;
-/* Position in the argbuf array containing the name of the output file
+/* Position in the argbuf vector containing the name of the output file
(the value associated with the "-o" flag). */
static int have_o_argbuf_index = 0;
-/* Were the options -c or -S passed. */
+/* Were the options -c, -S or -E passed. */
static int have_c = 0;
/* Was the option -o passed. */
/* Number of commands that exited with a signal. */
static int signal_count;
-
-/* Name with which this program was invoked. */
-
-static const char *programname;
\f
/* Allocate the argument vector. */
static void
alloc_args (void)
{
- argbuf_length = 10;
- argbuf = XNEWVEC (const char *, argbuf_length);
+ argbuf = VEC_alloc (const_char_p, heap, 10);
}
/* Clear out the vector of arguments (after a command is executed). */
static void
clear_args (void)
{
- argbuf_index = 0;
+ VEC_truncate (const_char_p, argbuf, 0);
}
/* Add one argument to the vector at the end.
static void
store_arg (const char *arg, int delete_always, int delete_failure)
{
- if (argbuf_index + 1 == argbuf_length)
- argbuf = XRESIZEVEC (const char *, argbuf, (argbuf_length *= 2));
-
- argbuf[argbuf_index++] = arg;
- argbuf[argbuf_index] = 0;
+ VEC_safe_push (const_char_p, heap, argbuf, arg);
if (strcmp (arg, "-o") == 0)
- have_o_argbuf_index = argbuf_index;
+ have_o_argbuf_index = VEC_length (const_char_p, argbuf);
if (delete_always || delete_failure)
- record_temp_file (arg, delete_always, delete_failure);
+ {
+ const char *p;
+ /* If the temporary file we should delete is specified as
+ part of a joined argument extract the filename. */
+ if (arg[0] == '-'
+ && (p = strrchr (arg, '=')))
+ arg = p + 1;
+ record_temp_file (arg, delete_always, delete_failure);
+ }
}
\f
/* Load specs from a file name named FILENAME, replacing occurrences of
char *specs_p;
if (verbose_flag)
- notice ("Reading specs from %s\n", filename);
+ fnotice (stderr, "Reading specs from %s\n", filename);
/* Open and stat the file. */
desc = open (filename, O_RDONLY, 0);
p1++;
if (*p1++ != '<' || p[-2] != '>')
- fatal ("specs %%include syntax malformed after %ld characters",
- (long) (p1 - buffer + 1));
+ fatal_error ("specs %%include syntax malformed after "
+ "%ld characters",
+ (long) (p1 - buffer + 1));
p[-2] = '\0';
new_filename = find_a_file (&startfile_prefixes, p1, R_OK, true);
p1++;
if (*p1++ != '<' || p[-2] != '>')
- fatal ("specs %%include syntax malformed after %ld characters",
- (long) (p1 - buffer + 1));
+ fatal_error ("specs %%include syntax malformed after "
+ "%ld characters",
+ (long) (p1 - buffer + 1));
p[-2] = '\0';
new_filename = find_a_file (&startfile_prefixes, p1, R_OK, true);
if (new_filename)
read_specs (new_filename, FALSE);
else if (verbose_flag)
- notice ("could not find specs file %s\n", p1);
+ fnotice (stderr, "could not find specs file %s\n", p1);
continue;
}
else if (!strncmp (p1, "%rename", sizeof "%rename" - 1)
p1++;
if (! ISALPHA ((unsigned char) *p1))
- fatal ("specs %%rename syntax malformed after %ld characters",
- (long) (p1 - buffer));
+ fatal_error ("specs %%rename syntax malformed after "
+ "%ld characters",
+ (long) (p1 - buffer));
p2 = p1;
while (*p2 && !ISSPACE ((unsigned char) *p2))
p2++;
if (*p2 != ' ' && *p2 != '\t')
- fatal ("specs %%rename syntax malformed after %ld characters",
- (long) (p2 - buffer));
+ fatal_error ("specs %%rename syntax malformed after "
+ "%ld characters",
+ (long) (p2 - buffer));
name_len = p2 - p1;
*p2++ = '\0';
p2++;
if (! ISALPHA ((unsigned char) *p2))
- fatal ("specs %%rename syntax malformed after %ld characters",
- (long) (p2 - buffer));
+ fatal_error ("specs %%rename syntax malformed after "
+ "%ld characters",
+ (long) (p2 - buffer));
/* Get new spec name. */
p3 = p2;
p3++;
if (p3 != p - 1)
- fatal ("specs %%rename syntax malformed after %ld characters",
- (long) (p3 - buffer));
+ fatal_error ("specs %%rename syntax malformed after "
+ "%ld characters",
+ (long) (p3 - buffer));
*p3 = '\0';
for (sl = specs; sl; sl = sl->next)
break;
if (!sl)
- fatal ("specs %s spec was not found to be renamed", p1);
+ fatal_error ("specs %s spec was not found to be renamed", p1);
if (strcmp (p1, p2) == 0)
continue;
for (newsl = specs; newsl; newsl = newsl->next)
if (strcmp (newsl->name, p2) == 0)
- fatal ("%s: attempt to rename spec '%s' to already defined spec '%s'",
+ fatal_error ("%s: attempt to rename spec %qs to "
+ "already defined spec %qs",
filename, p1, p2);
if (verbose_flag)
{
- notice ("rename spec %s to %s\n", p1, p2);
+ fnotice (stderr, "rename spec %s to %s\n", p1, p2);
#ifdef DEBUG_SPECS
- notice ("spec is '%s'\n\n", *(sl->ptr_spec));
+ fnotice (stderr, "spec is '%s'\n\n", *(sl->ptr_spec));
#endif
}
continue;
}
else
- fatal ("specs unknown %% command after %ld characters",
- (long) (p1 - buffer));
+ fatal_error ("specs unknown %% command after %ld characters",
+ (long) (p1 - buffer));
}
/* Find the colon that should end the suffix. */
/* The colon shouldn't be missing. */
if (*p1 != ':')
- fatal ("specs file malformed after %ld characters",
- (long) (p1 - buffer));
+ fatal_error ("specs file malformed after %ld characters",
+ (long) (p1 - buffer));
/* Skip back over trailing whitespace. */
p2 = p1;
/* Find the next line. */
p = skip_whitespace (p1 + 1);
if (p[1] == 0)
- fatal ("specs file malformed after %ld characters",
- (long) (p - buffer));
+ fatal_error ("specs file malformed after %ld characters",
+ (long) (p - buffer));
p1 = p;
/* Find next blank line or end of string. */
}
if (link_command_spec == 0)
- fatal ("spec file has no spec for linking");
+ fatal_error ("spec file has no spec for linking");
}
\f
/* Record the names of temporary files we tell compilers to write,
xputenv (const char *string)
{
if (verbose_flag)
- notice ("%s\n", string);
+ fnotice (stderr, "%s\n", string);
putenv (CONST_CAST (char *, string));
}
int require_machine_suffix, int os_multilib)
{
if (!IS_ABSOLUTE_PATH (prefix))
- fatal ("system path '%s' is not absolute", prefix);
+ fatal_error ("system path %qs is not absolute", prefix);
if (target_system_root)
{
const char *prog; /* program name. */
const char **argv; /* vector of args. */
};
+ const char *arg;
struct command *commands; /* each command buffer with above info. */
if (wrapper_string)
{
- string = find_a_file (&exec_prefixes, argbuf[0], X_OK, false);
- argbuf[0] = (string) ? string : argbuf[0];
+ string = find_a_file (&exec_prefixes,
+ VEC_index (const_char_p, argbuf, 0), X_OK, false);
+ if (string)
+ VEC_replace (const_char_p, argbuf, 0, string);
insert_wrapper (wrapper_string);
}
/* Count # of piped commands. */
- for (n_commands = 1, i = 0; i < argbuf_index; i++)
- if (strcmp (argbuf[i], "|") == 0)
+ for (n_commands = 1, i = 0; VEC_iterate (const_char_p, argbuf, i, arg); i++)
+ if (strcmp (arg, "|") == 0)
n_commands++;
/* Get storage for each command. */
and record info about each one.
Also search for the programs that are to be run. */
- commands[0].prog = argbuf[0]; /* first command. */
- commands[0].argv = &argbuf[0];
-
+ VEC_safe_push (const_char_p, heap, argbuf, 0);
+
+ commands[0].prog = VEC_index (const_char_p, argbuf, 0); /* first command. */
+ commands[0].argv = VEC_address (const_char_p, argbuf);
+
if (!wrapper_string)
{
string = find_a_file (&exec_prefixes, commands[0].prog, X_OK, false);
commands[0].argv[0] = (string) ? string : commands[0].argv[0];
}
- for (n_commands = 1, i = 0; i < argbuf_index; i++)
- if (strcmp (argbuf[i], "|") == 0)
+ for (n_commands = 1, i = 0; VEC_iterate (const_char_p, argbuf, i, arg); i++)
+ if (arg && strcmp (arg, "|") == 0)
{ /* each command. */
#if defined (__MSDOS__) || defined (OS2) || defined (VMS)
- fatal ("-pipe not supported");
+ fatal_error ("-pipe not supported");
#endif
- argbuf[i] = 0; /* termination of command args. */
- commands[n_commands].prog = argbuf[i + 1];
- commands[n_commands].argv = &argbuf[i + 1];
+ VEC_replace (const_char_p, argbuf, i, 0); /* Termination of
+ command args. */
+ commands[n_commands].prog = VEC_index (const_char_p, argbuf, i + 1);
+ commands[n_commands].argv
+ = &(VEC_address (const_char_p, argbuf))[i + 1];
string = find_a_file (&exec_prefixes, commands[n_commands].prog,
X_OK, false);
if (string)
n_commands++;
}
- argbuf[argbuf_index] = 0;
-
/* If -v, print what we are about to do, and maybe query. */
if (verbose_flag)
for (j = commands[i].argv; *j; j++)
{
const char *p;
- fprintf (stderr, " \"");
for (p = *j; *p; ++p)
+ if (!ISALNUM ((unsigned char) *p)
+ && *p != '_' && *p != '/' && *p != '-' && *p != '.')
+ break;
+ if (*p || !*j)
{
- if (*p == '"' || *p == '\\' || *p == '$')
- fputc ('\\', stderr);
- fputc (*p, stderr);
+ fprintf (stderr, " \"");
+ for (p = *j; *p; ++p)
+ {
+ if (*p == '"' || *p == '\\' || *p == '$')
+ fputc ('\\', stderr);
+ fputc (*p, stderr);
+ }
+ fputc ('"', stderr);
}
- fputc ('"', stderr);
+ else
+ fprintf (stderr, " %s", *j);
}
}
else
return 0;
}
#ifdef DEBUG
- notice ("\nGo ahead? (y or n) ");
+ fnotice (stderr, "\nGo ahead? (y or n) ");
fflush (stderr);
i = getchar ();
if (i != '\n')
/* Run each piped subprocess. */
- pex = pex_init (PEX_USE_PIPES | (report_times ? PEX_RECORD_TIMES : 0),
- programname, temp_filename);
+ pex = pex_init (PEX_USE_PIPES | ((report_times || report_times_to_file)
+ ? PEX_RECORD_TIMES : 0),
+ progname, temp_filename);
if (pex == NULL)
- pfatal_with_name (_("pex_init failed"));
+ fatal_error ("pex_init failed: %m");
for (i = 0; i < n_commands; i++)
{
if (errmsg != NULL)
{
if (err == 0)
- fatal (errmsg);
+ fatal_error (errmsg);
else
{
errno = err;
statuses = (int *) alloca (n_commands * sizeof (int));
if (!pex_get_status (pex, n_commands, statuses))
- pfatal_with_name (_("failed to get exit status"));
+ fatal_error ("failed to get exit status: %m");
- if (report_times)
+ if (report_times || report_times_to_file)
{
times = (struct pex_time *) alloca (n_commands * sizeof (struct pex_time));
if (!pex_get_times (pex, n_commands, times))
- pfatal_with_name (_("failed to get process times"));
+ fatal_error ("failed to get process times: %m");
}
pex_free (pex);
}
else
#endif
- fatal_ice ("\
-Internal error: %s (program %s)\n\
-Please submit a full bug report.\n\
-See %s for instructions.",
- strsignal (WTERMSIG (status)), commands[i].prog,
- bug_report_url);
+ internal_error ("%s (program %s)",
+ strsignal (WTERMSIG (status)), commands[i].prog);
}
else if (WIFEXITED (status)
&& WEXITSTATUS (status) >= MIN_FATAL_STATUS)
ret_code = -1;
}
- if (report_times)
+ if (report_times || report_times_to_file)
{
struct pex_time *pt = ×[i];
double ut, st;
+ (double) pt->system_microseconds / 1.0e6);
if (ut + st != 0)
- notice ("# %s %.2f %.2f\n", commands[i].prog, ut, st);
+ {
+ if (report_times)
+ fnotice (stderr, "# %s %.2f %.2f\n",
+ commands[i].prog, ut, st);
+
+ if (report_times_to_file)
+ {
+ int c = 0;
+ const char *const *j;
+
+ fprintf (report_times_to_file, "%g %g", ut, st);
+
+ for (j = &commands[i].prog; *j; j = &commands[i].argv[++c])
+ {
+ const char *p;
+ for (p = *j; *p; ++p)
+ if (*p == '"' || *p == '\\' || *p == '$'
+ || ISSPACE (*p))
+ break;
+
+ if (*p)
+ {
+ fprintf (report_times_to_file, " \"");
+ for (p = *j; *p; ++p)
+ {
+ if (*p == '"' || *p == '\\' || *p == '$')
+ fputc ('\\', report_times_to_file);
+ fputc (*p, report_times_to_file);
+ }
+ fputc ('"', report_times_to_file);
+ }
+ else
+ fprintf (report_times_to_file, " %s", *j);
+ }
+
+ fputc ('\n', report_times_to_file);
+ }
+ }
}
}
SWITCH_LIVE to indicate this switch is true in a conditional spec.
SWITCH_FALSE to indicate this switch is overridden by a later switch.
SWITCH_IGNORE to indicate this switch should be ignored (used in %<S).
+ SWITCH_IGNORE_PERMANENTLY to indicate this switch should be ignored
+ in all do_spec calls afterwards. Used for %<S from self specs.
The `validated' field is nonzero if any spec has looked at this switch;
if it remains zero at the end of the run, it must be meaningless. */
-#define SWITCH_LIVE 0x1
-#define SWITCH_FALSE 0x2
-#define SWITCH_IGNORE 0x4
+#define SWITCH_LIVE 0x1
+#define SWITCH_FALSE 0x2
+#define SWITCH_IGNORE 0x4
+#define SWITCH_IGNORE_PERMANENTLY 0x8
struct switchstr
{
static int n_switches;
+static int n_switches_alloc;
+
+/* Set to zero if -fcompare-debug is disabled, positive if it's
+ enabled and we're running the first compilation, negative if it's
+ enabled and we're running the second compilation. For most of the
+ time, it's in the range -1..1, but it can be temporarily set to 2
+ or 3 to indicate that the -fcompare-debug flags didn't come from
+ the command-line, but rather from the GCC_COMPARE_DEBUG environment
+ variable, until a synthesized -fcompare-debug flag is added to the
+ command line. */
+int compare_debug;
+
+/* Set to nonzero if we've seen the -fcompare-debug-second flag. */
+int compare_debug_second;
+
+/* Set to the flags that should be passed to the second compilation in
+ a -fcompare-debug compilation. */
+const char *compare_debug_opt;
+
+static struct switchstr *switches_debug_check[2];
+
+static int n_switches_debug_check[2];
+
+static int n_switches_alloc_debug_check[2];
+
+static char *debug_check_temp_file[2];
+
/* Language is one of three things:
1) The name of a real programming language.
int n_infiles;
+static int n_infiles_alloc;
+
/* True if multiple input files are being compiled to a single
assembly file. */
static void
display_help (void)
{
- printf (_("Usage: %s [options] file...\n"), programname);
+ printf (_("Usage: %s [options] file...\n"), progname);
fputs (_("Options:\n"), stdout);
fputs (_(" -pass-exit-codes Exit with highest error code from a phase\n"), stdout);
fputs (_(" -Xassembler <arg> Pass <arg> on to the assembler\n"), stdout);
fputs (_(" -Xpreprocessor <arg> Pass <arg> on to the preprocessor\n"), stdout);
fputs (_(" -Xlinker <arg> Pass <arg> on to the linker\n"), stdout);
- fputs (_(" -combine Pass multiple source files to compiler at once\n"), stdout);
fputs (_(" -save-temps Do not delete intermediate files\n"), stdout);
fputs (_(" -save-temps=<arg> Do not delete intermediate files\n"), stdout);
+ fputs (_("\
+ -no-canonical-prefixes Do not canonicalize paths when building relative\n\
+ prefixes to other gcc components\n"), stdout);
fputs (_(" -pipe Use pipes rather than intermediate files\n"), stdout);
fputs (_(" -time Time the execution of each subprocess\n"), stdout);
fputs (_(" -specs=<file> Override built-in specs with the contents of <file>\n"), stdout);
--sysroot=<directory> Use <directory> as the root directory for headers\n\
and libraries\n"), stdout);
fputs (_(" -B <directory> Add <directory> to the compiler's search paths\n"), stdout);
- fputs (_(" -b <machine> Run gcc for target <machine>, if installed\n"), stdout);
- fputs (_(" -V <version> Run gcc version number <version>, if installed\n"), stdout);
fputs (_(" -v Display the programs invoked by the compiler\n"), stdout);
fputs (_(" -### Like -v but options quoted and commands not executed\n"), stdout);
fputs (_(" -E Preprocess only; do not compile, assemble or link\n"), stdout);
\nOptions starting with -g, -f, -m, -O, -W, or --param are automatically\n\
passed on to the various sub-processes invoked by %s. In order to pass\n\
other options on to these processes the -W<letter> options must be used.\n\
-"), programname);
+"), progname);
/* The rest of the options are displayed by invocations of the various
sub-processes. */
static void
add_preprocessor_option (const char *option, int len)
{
- n_preprocessor_options++;
-
- if (! preprocessor_options)
- preprocessor_options = XNEWVEC (char *, n_preprocessor_options);
- else
- preprocessor_options = XRESIZEVEC (char *, preprocessor_options,
- n_preprocessor_options);
-
- preprocessor_options [n_preprocessor_options - 1] =
- save_string (option, len);
+ VEC_safe_push (char_p, heap, preprocessor_options,
+ save_string (option, len));
}
static void
add_assembler_option (const char *option, int len)
{
- n_assembler_options++;
-
- if (! assembler_options)
- assembler_options = XNEWVEC (char *, n_assembler_options);
- else
- assembler_options = XRESIZEVEC (char *, assembler_options,
- n_assembler_options);
-
- assembler_options [n_assembler_options - 1] = save_string (option, len);
+ VEC_safe_push (char_p, heap, assembler_options, save_string (option, len));
}
static void
add_linker_option (const char *option, int len)
{
- n_linker_options++;
-
- if (! linker_options)
- linker_options = XNEWVEC (char *, n_linker_options);
- else
- linker_options = XRESIZEVEC (char *, linker_options, n_linker_options);
-
- linker_options [n_linker_options - 1] = save_string (option, len);
+ VEC_safe_push (char_p, heap, linker_options, save_string (option, len));
}
\f
-/* Create the vector `switches' and its contents.
- Store its length in `n_switches'. */
+/* Allocate space for an input file in infiles. */
static void
-process_command (int argc, const char **argv)
+alloc_infile (void)
{
- int i;
- const char *temp;
- char *temp1;
- const char *spec_lang = 0;
- int last_language_n_infiles;
- int lang_n_infiles = 0;
-#ifdef MODIFY_TARGET_NAME
- int is_modify_target_name;
- unsigned int j;
-#endif
- const char *tooldir_prefix;
-
- GET_ENVIRONMENT (gcc_exec_prefix, "GCC_EXEC_PREFIX");
+ if (n_infiles_alloc == 0)
+ {
+ n_infiles_alloc = 16;
+ infiles = XNEWVEC (struct infile, n_infiles_alloc);
+ }
+ else if (n_infiles_alloc == n_infiles)
+ {
+ n_infiles_alloc *= 2;
+ infiles = XRESIZEVEC (struct infile, infiles, n_infiles_alloc);
+ }
+}
- n_switches = 0;
- n_infiles = 0;
- added_libraries = 0;
+/* Store an input file with the given NAME and LANGUAGE in
+ infiles. */
- /* Figure compiler version from version string. */
+static void
+add_infile (const char *name, const char *language)
+{
+ alloc_infile ();
+ infiles[n_infiles].name = name;
+ infiles[n_infiles++].language = language;
+}
- compiler_version = temp1 = xstrdup (version_string);
+/* Allocate space for a switch in switches. */
- for (; *temp1; ++temp1)
+static void
+alloc_switch (void)
+{
+ if (n_switches_alloc == 0)
{
- if (*temp1 == ' ')
- {
- *temp1 = '\0';
- break;
- }
+ n_switches_alloc = 16;
+ switches = XNEWVEC (struct switchstr, n_switches_alloc);
}
-
- /* If there is a -V or -b option (or both), process it now, before
- trying to interpret the rest of the command line.
- Use heuristic that all configuration names must have at least
- one dash '-'. This allows us to pass options starting with -b. */
- if (argc > 1 && argv[1][0] == '-'
- && (argv[1][1] == 'V'
- || (argv[1][1] == 'b'
- && (argv[1][2] == '\0'
- || NULL != strchr (argv[1] + 2, '-')))))
+ else if (n_switches_alloc == n_switches)
{
- const char *new_version = DEFAULT_TARGET_VERSION;
- const char *new_machine = DEFAULT_TARGET_MACHINE;
- const char *progname = argv[0];
- char **new_argv;
- char *new_argv0;
- int baselen;
- int status = 0;
- int err = 0;
- const char *errmsg;
-
- while (argc > 1 && argv[1][0] == '-'
- && (argv[1][1] == 'V'
- || (argv[1][1] == 'b'
- && (argv[1][2] == '\0'
- || NULL != strchr (argv[1] + 2, '-')))))
- {
- char opt = argv[1][1];
- const char *arg;
- if (argv[1][2] != '\0')
- {
- arg = argv[1] + 2;
- argc -= 1;
- argv += 1;
- }
- else if (argc > 2)
- {
- arg = argv[2];
- argc -= 2;
- argv += 2;
- }
- else
- fatal ("'-%c' option must have argument", opt);
- if (opt == 'V')
- new_version = arg;
- else
- new_machine = arg;
- }
+ n_switches_alloc *= 2;
+ switches = XRESIZEVEC (struct switchstr, switches, n_switches_alloc);
+ }
+}
- for (baselen = strlen (progname); baselen > 0; baselen--)
- if (IS_DIR_SEPARATOR (progname[baselen-1]))
- break;
- new_argv0 = XDUPVAR (char, progname, baselen,
- baselen + concat_length (new_version, new_machine,
- "-gcc-", NULL) + 1);
- strcpy (new_argv0 + baselen, new_machine);
- strcat (new_argv0, "-gcc-");
- strcat (new_argv0, new_version);
+/* Save an option OPT with N_ARGS arguments in array ARGS, marking it
+ as validated if VALIDATED. */
- new_argv = XDUPVEC (char *, argv, argc + 1);
- new_argv[0] = new_argv0;
+static void
+save_switch (const char *opt, size_t n_args, const char *const *args,
+ bool validated)
+{
+ alloc_switch ();
+ switches[n_switches].part1 = opt + 1;
+ if (n_args == 0)
+ switches[n_switches].args = 0;
+ else
+ {
+ switches[n_switches].args = XNEWVEC (const char *, n_args + 1);
+ memcpy (switches[n_switches].args, args, n_args * sizeof (const char *));
+ switches[n_switches].args[n_args] = NULL;
+ }
+
+ switches[n_switches].live_cond = 0;
+ switches[n_switches].validated = validated;
+ switches[n_switches].ordering = 0;
+ n_switches++;
+}
+
+/* Handle an option DECODED that is unknown to the option-processing
+ machinery, but may be known to specs. */
+
+static bool
+driver_unknown_option_callback (const struct cl_decoded_option *decoded)
+{
+ save_switch (decoded->canonical_option[0],
+ decoded->canonical_option_num_elements - 1,
+ &decoded->canonical_option[1], false);
+
+ return false;
+}
+
+/* Handle an option DECODED that is not marked as CL_DRIVER.
+ LANG_MASK will always be CL_DRIVER. */
+
+static void
+driver_wrong_lang_callback (const struct cl_decoded_option *decoded,
+ unsigned int lang_mask ATTRIBUTE_UNUSED)
+{
+ /* At this point, non-driver options are accepted (and expected to
+ be passed down by specs) unless marked to be rejected by the
+ driver. Options to be rejected by the driver but accepted by the
+ compilers proper are treated just like completely unknown
+ options. */
+ const struct cl_option *option = &cl_options[decoded->opt_index];
+
+ if (option->flags & CL_REJECT_DRIVER)
+ error ("unrecognized command line option %qs",
+ decoded->orig_option_with_args_text);
+ else
+ driver_unknown_option_callback (decoded);
+}
+
+/* Note that an option (index OPT_INDEX, argument ARG, value VALUE)
+ has been successfully handled with a handler for mask MASK. */
+
+static void
+driver_post_handling_callback (const struct cl_decoded_option *decoded ATTRIBUTE_UNUSED,
+ unsigned int mask ATTRIBUTE_UNUSED)
+{
+ /* Nothing to do here. */
+}
+
+static const char *spec_lang = 0;
+static int last_language_n_infiles;
+
+/* Handle a driver option; arguments and return value as for
+ handle_option. */
+
+static bool
+driver_handle_option (struct gcc_options *opts,
+ struct gcc_options *opts_set,
+ const struct cl_decoded_option *decoded,
+ unsigned int lang_mask ATTRIBUTE_UNUSED, int kind,
+ location_t loc,
+ const struct cl_option_handlers *handlers ATTRIBUTE_UNUSED,
+ diagnostic_context *dc)
+{
+ size_t opt_index = decoded->opt_index;
+ const char *arg = decoded->arg;
+ const char *compare_debug_replacement_opt;
+ int value = decoded->value;
+ bool validated = false;
+ bool do_save = true;
+
+ gcc_assert (opts == &global_options);
+ gcc_assert (opts_set == &global_options_set);
+ gcc_assert (kind == DK_UNSPECIFIED);
+ gcc_assert (loc == UNKNOWN_LOCATION);
+ gcc_assert (dc == global_dc);
+
+ switch (opt_index)
+ {
+ case OPT_dumpspecs:
+ {
+ struct spec_list *sl;
+ init_spec ();
+ for (sl = specs; sl; sl = sl->next)
+ printf ("*%s:\n%s\n\n", sl->name, *(sl->ptr_spec));
+ if (link_command_spec)
+ printf ("*link_command:\n%s\n\n", link_command_spec);
+ exit (0);
+ }
+
+ case OPT_dumpversion:
+ printf ("%s\n", spec_version);
+ exit (0);
+
+ case OPT_dumpmachine:
+ printf ("%s\n", spec_machine);
+ exit (0);
+
+ case OPT__version:
+ print_version = 1;
+
+ /* CPP driver cannot obtain switch from cc1_options. */
+ if (is_cpp_driver)
+ add_preprocessor_option ("--version", strlen ("--version"));
+ add_assembler_option ("--version", strlen ("--version"));
+ add_linker_option ("--version", strlen ("--version"));
+ break;
- errmsg = pex_one (PEX_SEARCH, new_argv0, new_argv, progname, NULL,
- NULL, &status, &err);
+ case OPT__help:
+ print_help_list = 1;
- if (errmsg)
+ /* CPP driver cannot obtain switch from cc1_options. */
+ if (is_cpp_driver)
+ add_preprocessor_option ("--help", 6);
+ add_assembler_option ("--help", 6);
+ add_linker_option ("--help", 6);
+ break;
+
+ case OPT__help_:
+ print_subprocess_help = 2;
+ break;
+
+ case OPT__target_help:
+ print_subprocess_help = 1;
+
+ /* CPP driver cannot obtain switch from cc1_options. */
+ if (is_cpp_driver)
+ add_preprocessor_option ("--target-help", 13);
+ add_assembler_option ("--target-help", 13);
+ add_linker_option ("--target-help", 13);
+ break;
+
+ case OPT_pass_exit_codes:
+ case OPT_print_search_dirs:
+ case OPT_print_file_name_:
+ case OPT_print_prog_name_:
+ case OPT_print_multi_lib:
+ case OPT_print_multi_directory:
+ case OPT_print_sysroot:
+ case OPT_print_multi_os_directory:
+ case OPT_print_sysroot_headers_suffix:
+ case OPT_time:
+ case OPT_wrapper:
+ /* These options set the variables specified in common.opt
+ automatically, and do not need to be saved for spec
+ processing. */
+ do_save = false;
+ break;
+
+ case OPT_print_libgcc_file_name:
+ print_file_name = "libgcc.a";
+ do_save = false;
+ break;
+
+ case OPT_fcompare_debug_second:
+ compare_debug_second = 1;
+ break;
+
+ case OPT_fcompare_debug:
+ switch (value)
{
- if (err == 0)
- fatal ("couldn't run '%s': %s", new_argv0, errmsg);
- else
- fatal ("couldn't run '%s': %s: %s", new_argv0, errmsg,
- xstrerror (err));
- }
- exit (status);
+ case 0:
+ compare_debug_replacement_opt = "-fcompare-debug=";
+ arg = "";
+ goto compare_debug_with_arg;
+
+ case 1:
+ compare_debug_replacement_opt = "-fcompare-debug=-gtoggle";
+ arg = "-gtoggle";
+ goto compare_debug_with_arg;
+
+ default:
+ gcc_unreachable ();
+ }
+ break;
+
+ case OPT_fcompare_debug_:
+ compare_debug_replacement_opt = decoded->canonical_option[0];
+ compare_debug_with_arg:
+ gcc_assert (decoded->canonical_option_num_elements == 1);
+ gcc_assert (arg != NULL);
+ if (arg)
+ compare_debug = 1;
+ else
+ compare_debug = -1;
+ if (compare_debug < 0)
+ compare_debug_opt = NULL;
+ else
+ compare_debug_opt = arg;
+ save_switch (compare_debug_replacement_opt, 0, NULL, validated);
+ return true;
+
+ case OPT_Wa_:
+ {
+ int prev, j;
+ /* Pass the rest of this option to the assembler. */
+
+ /* Split the argument at commas. */
+ prev = 0;
+ for (j = 0; arg[j]; j++)
+ if (arg[j] == ',')
+ {
+ add_assembler_option (arg + prev, j - prev);
+ prev = j + 1;
+ }
+
+ /* Record the part after the last comma. */
+ add_assembler_option (arg + prev, j - prev);
+ }
+ do_save = false;
+ break;
+
+ case OPT_Wp_:
+ {
+ int prev, j;
+ /* Pass the rest of this option to the preprocessor. */
+
+ /* Split the argument at commas. */
+ prev = 0;
+ for (j = 0; arg[j]; j++)
+ if (arg[j] == ',')
+ {
+ add_preprocessor_option (arg + prev, j - prev);
+ prev = j + 1;
+ }
+
+ /* Record the part after the last comma. */
+ add_preprocessor_option (arg + prev, j - prev);
+ }
+ do_save = false;
+ break;
+
+ case OPT_Wl_:
+ {
+ int prev, j;
+ /* Split the argument at commas. */
+ prev = 0;
+ for (j = 0; arg[j]; j++)
+ if (arg[j] == ',')
+ {
+ add_infile (save_string (arg + prev, j - prev), "*");
+ prev = j + 1;
+ }
+ /* Record the part after the last comma. */
+ add_infile (arg + prev, "*");
+ }
+ do_save = false;
+ break;
+
+ case OPT_Xlinker:
+ add_infile (arg, "*");
+ do_save = false;
+ break;
+
+ case OPT_Xpreprocessor:
+ add_preprocessor_option (arg, strlen (arg));
+ do_save = false;
+ break;
+
+ case OPT_Xassembler:
+ add_assembler_option (arg, strlen (arg));
+ do_save = false;
+ break;
+
+ case OPT_l:
+ /* POSIX allows separation of -l and the lib arg; canonicalize
+ by concatenating -l with its arg */
+ add_infile (concat ("-l", arg, NULL), "*");
+ do_save = false;
+ break;
+
+ case OPT_L:
+ /* Similarly, canonicalize -L for linkers that may not accept
+ separate arguments. */
+ save_switch (concat ("-L", arg, NULL), 0, NULL, validated);
+ return true;
+
+ case OPT_save_temps:
+ save_temps_flag = SAVE_TEMPS_CWD;
+ validated = true;
+ break;
+
+ case OPT_save_temps_:
+ if (strcmp (arg, "cwd") == 0)
+ save_temps_flag = SAVE_TEMPS_CWD;
+ else if (strcmp (arg, "obj") == 0
+ || strcmp (arg, "object") == 0)
+ save_temps_flag = SAVE_TEMPS_OBJ;
+ else
+ fatal_error ("%qs is an unknown -save-temps option",
+ decoded->orig_option_with_args_text);
+ break;
+
+ case OPT_no_canonical_prefixes:
+ /* Already handled as a special case, so ignored here. */
+ do_save = false;
+ break;
+
+ case OPT_pipe:
+ validated = true;
+ /* These options set the variables specified in common.opt
+ automatically, but do need to be saved for spec
+ processing. */
+ break;
+
+ case OPT_specs_:
+ {
+ struct user_specs *user = XNEW (struct user_specs);
+
+ user->next = (struct user_specs *) 0;
+ user->filename = arg;
+ if (user_specs_tail)
+ user_specs_tail->next = user;
+ else
+ user_specs_head = user;
+ user_specs_tail = user;
+ }
+ do_save = false;
+ break;
+
+ case OPT__sysroot_:
+ target_system_root = arg;
+ target_system_root_changed = 1;
+ do_save = false;
+ break;
+
+ case OPT_time_:
+ if (report_times_to_file)
+ fclose (report_times_to_file);
+ report_times_to_file = fopen (arg, "a");
+ do_save = false;
+ break;
+
+ case OPT____:
+ /* "-###"
+ This is similar to -v except that there is no execution
+ of the commands and the echoed arguments are quoted. It
+ is intended for use in shell scripts to capture the
+ driver-generated command line. */
+ verbose_only_flag++;
+ verbose_flag = 1;
+ do_save = false;
+ break;
+
+ case OPT_B:
+ {
+ size_t len = strlen (arg);
+
+ /* Catch the case where the user has forgotten to append a
+ directory separator to the path. Note, they may be using
+ -B to add an executable name prefix, eg "i386-elf-", in
+ order to distinguish between multiple installations of
+ GCC in the same directory. Hence we must check to see
+ if appending a directory separator actually makes a
+ valid directory name. */
+ if (!IS_DIR_SEPARATOR (arg[len - 1])
+ && is_directory (arg, false))
+ {
+ char *tmp = XNEWVEC (char, len + 2);
+ strcpy (tmp, arg);
+ tmp[len] = DIR_SEPARATOR;
+ tmp[++len] = 0;
+ arg = tmp;
+ }
+
+ add_prefix (&exec_prefixes, arg, NULL,
+ PREFIX_PRIORITY_B_OPT, 0, 0);
+ add_prefix (&startfile_prefixes, arg, NULL,
+ PREFIX_PRIORITY_B_OPT, 0, 0);
+ add_prefix (&include_prefixes, arg, NULL,
+ PREFIX_PRIORITY_B_OPT, 0, 0);
+ }
+ validated = true;
+ break;
+
+ case OPT_x:
+ spec_lang = arg;
+ if (!strcmp (spec_lang, "none"))
+ /* Suppress the warning if -xnone comes after the last input
+ file, because alternate command interfaces like g++ might
+ find it useful to place -xnone after each input file. */
+ spec_lang = 0;
+ else
+ last_language_n_infiles = n_infiles;
+ do_save = false;
+ break;
+
+ case OPT_o:
+ have_o = 1;
+#if defined(HAVE_TARGET_EXECUTABLE_SUFFIX) || defined(HAVE_TARGET_OBJECT_SUFFIX)
+ arg = convert_filename (arg, ! have_c, 0);
+#endif
+ /* Save the output name in case -save-temps=obj was used. */
+ save_temps_prefix = xstrdup (arg);
+ /* On some systems, ld cannot handle "-o" without a space. So
+ split the option from its argument. */
+ save_switch ("-o", 1, &arg, validated);
+ return true;
+
+ case OPT_static_libgcc:
+ case OPT_shared_libgcc:
+ case OPT_static_libgfortran:
+ case OPT_static_libstdc__:
+ /* These are always valid, since gcc.c itself understands the
+ first two, gfortranspec.c understands -static-libgfortran and
+ g++spec.c understands -static-libstdc++ */
+ validated = true;
+ break;
+
+ default:
+ /* Various driver options need no special processing at this
+ point, having been handled in a prescan above or being
+ handled by specs. */
+ break;
+ }
+
+ if (do_save)
+ save_switch (decoded->canonical_option[0],
+ decoded->canonical_option_num_elements - 1,
+ &decoded->canonical_option[1], validated);
+ return true;
+}
+
+/* Put the driver's standard set of option handlers in *HANDLERS. */
+
+static void
+set_option_handlers (struct cl_option_handlers *handlers)
+{
+ handlers->unknown_option_callback = driver_unknown_option_callback;
+ handlers->wrong_lang_callback = driver_wrong_lang_callback;
+ handlers->post_handling_callback = driver_post_handling_callback;
+ handlers->num_handlers = 1;
+ handlers->handlers[0].handler = driver_handle_option;
+ handlers->handlers[0].mask = CL_DRIVER;
+}
+
+/* Create the vector `switches' and its contents.
+ Store its length in `n_switches'. */
+
+static void
+process_command (unsigned int decoded_options_count,
+ struct cl_decoded_option *decoded_options)
+{
+ const char *temp;
+ char *temp1;
+ const char *tooldir_prefix;
+ char *(*get_relative_prefix) (const char *, const char *,
+ const char *) = NULL;
+ struct cl_option_handlers handlers;
+ unsigned int j;
+
+ GET_ENVIRONMENT (gcc_exec_prefix, "GCC_EXEC_PREFIX");
+
+ n_switches = 0;
+ n_infiles = 0;
+ added_libraries = 0;
+
+ /* Figure compiler version from version string. */
+
+ compiler_version = temp1 = xstrdup (version_string);
+
+ for (; *temp1; ++temp1)
+ {
+ if (*temp1 == ' ')
+ {
+ *temp1 = '\0';
+ break;
+ }
+ }
+
+ /* Handle any -no-canonical-prefixes flag early, to assign the function
+ that builds relative prefixes. This function creates default search
+ paths that are needed later in normal option handling. */
+
+ for (j = 1; j < decoded_options_count; j++)
+ {
+ if (decoded_options[j].opt_index == OPT_no_canonical_prefixes)
+ {
+ get_relative_prefix = make_relative_prefix_ignore_links;
+ break;
+ }
}
+ if (! get_relative_prefix)
+ get_relative_prefix = make_relative_prefix;
/* Set up the default search paths. If there is no GCC_EXEC_PREFIX,
- see if we can create it from the pathname specified in argv[0]. */
+ see if we can create it from the pathname specified in
+ decoded_options[0].arg. */
gcc_libexec_prefix = standard_libexec_prefix;
#ifndef VMS
/* FIXME: make_relative_prefix doesn't yet work for VMS. */
if (!gcc_exec_prefix)
{
- gcc_exec_prefix = make_relative_prefix (argv[0], standard_bindir_prefix,
- standard_exec_prefix);
- gcc_libexec_prefix = make_relative_prefix (argv[0],
- standard_bindir_prefix,
- standard_libexec_prefix);
+ gcc_exec_prefix = get_relative_prefix (decoded_options[0].arg,
+ standard_bindir_prefix,
+ standard_exec_prefix);
+ gcc_libexec_prefix = get_relative_prefix (decoded_options[0].arg,
+ standard_bindir_prefix,
+ standard_libexec_prefix);
if (gcc_exec_prefix)
xputenv (concat ("GCC_EXEC_PREFIX=", gcc_exec_prefix, NULL));
}
/ (which is ignored by make_relative_prefix), so append a
program name. */
char *tmp_prefix = concat (gcc_exec_prefix, "gcc", NULL);
- gcc_libexec_prefix = make_relative_prefix (tmp_prefix,
- standard_exec_prefix,
- standard_libexec_prefix);
+ gcc_libexec_prefix = get_relative_prefix (tmp_prefix,
+ standard_exec_prefix,
+ standard_libexec_prefix);
/* The path is unrelocated, so fallback to the original setting. */
if (!gcc_libexec_prefix)
#endif
/* From this point onward, gcc_exec_prefix is non-null if the toolchain
is relocated. The toolchain was either relocated using GCC_EXEC_PREFIX
- or an automatically created GCC_EXEC_PREFIX from argv[0]. */
+ or an automatically created GCC_EXEC_PREFIX from
+ decoded_options[0].arg. */
+
+ /* Do language-specific adjustment/addition of flags. */
+ lang_specific_driver (&decoded_options, &decoded_options_count,
+ &added_libraries);
if (gcc_exec_prefix)
{
}
}
- /* Convert new-style -- options to old-style. */
- translate_options (&argc, (const char *const **) &argv);
-
- /* Do language-specific adjustment/addition of flags. */
- lang_specific_driver (&argc, (const char *const **) &argv, &added_libraries);
-
- /* Scan argv twice. Here, the first time, just count how many switches
- there will be in their vector, and how many input files in theirs.
- Here we also parse the switches that cc itself uses (e.g. -v). */
-
- for (i = 1; i < argc; i++)
- {
- if (! strcmp (argv[i], "-dumpspecs"))
- {
- struct spec_list *sl;
- init_spec ();
- for (sl = specs; sl; sl = sl->next)
- printf ("*%s:\n%s\n\n", sl->name, *(sl->ptr_spec));
- if (link_command_spec)
- printf ("*link_command:\n%s\n\n", link_command_spec);
- exit (0);
- }
- else if (! strcmp (argv[i], "-dumpversion"))
- {
- printf ("%s\n", spec_version);
- exit (0);
- }
- else if (! strcmp (argv[i], "-dumpmachine"))
- {
- printf ("%s\n", spec_machine);
- exit (0);
- }
- else if (strcmp (argv[i], "-fversion") == 0)
- {
- /* translate_options () has turned --version into -fversion. */
- printf (_("%s %s%s\n"), programname, pkgversion_string,
- version_string);
- printf ("Copyright %s 2009 Free Software Foundation, Inc.\n",
- _("(C)"));
- fputs (_("This is free software; see the source for copying conditions. There is NO\n\
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n\n"),
- stdout);
- exit (0);
- }
- else if (strcmp (argv[i], "-fhelp") == 0)
- {
- /* translate_options () has turned --help into -fhelp. */
- print_help_list = 1;
-
- /* We will be passing a dummy file on to the sub-processes. */
- n_infiles++;
- n_switches++;
-
- /* CPP driver cannot obtain switch from cc1_options. */
- if (is_cpp_driver)
- add_preprocessor_option ("--help", 6);
- add_assembler_option ("--help", 6);
- add_linker_option ("--help", 6);
- }
- else if (strncmp (argv[i], "-fhelp=", 7) == 0)
- {
- /* translate_options () has turned --help into -fhelp. */
- print_subprocess_help = 2;
-
- /* We will be passing a dummy file on to the sub-processes. */
- n_infiles++;
- n_switches++;
- }
- else if (strcmp (argv[i], "-ftarget-help") == 0)
- {
- /* translate_options() has turned --target-help into -ftarget-help. */
- print_subprocess_help = 1;
-
- /* We will be passing a dummy file on to the sub-processes. */
- n_infiles++;
- n_switches++;
-
- /* CPP driver cannot obtain switch from cc1_options. */
- if (is_cpp_driver)
- add_preprocessor_option ("--target-help", 13);
- add_assembler_option ("--target-help", 13);
- add_linker_option ("--target-help", 13);
- }
- else if (! strcmp (argv[i], "-pass-exit-codes"))
- {
- pass_exit_codes = 1;
- n_switches++;
- }
- else if (! strcmp (argv[i], "-print-search-dirs"))
- print_search_dirs = 1;
- else if (! strcmp (argv[i], "-print-libgcc-file-name"))
- print_file_name = "libgcc.a";
- else if (! strncmp (argv[i], "-print-file-name=", 17))
- print_file_name = argv[i] + 17;
- else if (! strncmp (argv[i], "-print-prog-name=", 17))
- print_prog_name = argv[i] + 17;
- else if (! strcmp (argv[i], "-print-multi-lib"))
- print_multi_lib = 1;
- else if (! strcmp (argv[i], "-print-multi-directory"))
- print_multi_directory = 1;
- else if (! strcmp (argv[i], "-print-sysroot"))
- print_sysroot = 1;
- else if (! strcmp (argv[i], "-print-multi-os-directory"))
- print_multi_os_directory = 1;
- else if (! strcmp (argv[i], "-print-sysroot-headers-suffix"))
- print_sysroot_headers_suffix = 1;
- else if (! strncmp (argv[i], "-Wa,", 4))
- {
- int prev, j;
- /* Pass the rest of this option to the assembler. */
-
- /* Split the argument at commas. */
- prev = 4;
- for (j = 4; argv[i][j]; j++)
- if (argv[i][j] == ',')
- {
- add_assembler_option (argv[i] + prev, j - prev);
- prev = j + 1;
- }
-
- /* Record the part after the last comma. */
- add_assembler_option (argv[i] + prev, j - prev);
- }
- else if (! strncmp (argv[i], "-Wp,", 4))
- {
- int prev, j;
- /* Pass the rest of this option to the preprocessor. */
-
- /* Split the argument at commas. */
- prev = 4;
- for (j = 4; argv[i][j]; j++)
- if (argv[i][j] == ',')
- {
- add_preprocessor_option (argv[i] + prev, j - prev);
- prev = j + 1;
- }
-
- /* Record the part after the last comma. */
- add_preprocessor_option (argv[i] + prev, j - prev);
- }
- else if (argv[i][0] == '+' && argv[i][1] == 'e')
- /* The +e options to the C++ front-end. */
- n_switches++;
- else if (strncmp (argv[i], "-Wl,", 4) == 0)
- {
- int j;
- /* Split the argument at commas. */
- for (j = 3; argv[i][j]; j++)
- n_infiles += (argv[i][j] == ',');
- }
- else if (strcmp (argv[i], "-Xlinker") == 0)
- {
- if (i + 1 == argc)
- fatal ("argument to '-Xlinker' is missing");
-
- n_infiles++;
- i++;
- }
- else if (strcmp (argv[i], "-Xpreprocessor") == 0)
- {
- if (i + 1 == argc)
- fatal ("argument to '-Xpreprocessor' is missing");
-
- add_preprocessor_option (argv[i+1], strlen (argv[i+1]));
- }
- else if (strcmp (argv[i], "-Xassembler") == 0)
- {
- if (i + 1 == argc)
- fatal ("argument to '-Xassembler' is missing");
-
- add_assembler_option (argv[i+1], strlen (argv[i+1]));
- }
- else if (strcmp (argv[i], "-l") == 0)
- {
- if (i + 1 == argc)
- fatal ("argument to '-l' is missing");
-
- n_infiles++;
- i++;
- }
- else if (strncmp (argv[i], "-l", 2) == 0)
- n_infiles++;
- else if (strcmp (argv[i], "-save-temps") == 0)
- {
- save_temps_flag = SAVE_TEMPS_CWD;
- n_switches++;
- }
- else if (strncmp (argv[i], "-save-temps=", 12) == 0)
- {
- n_switches++;
- if (strcmp (argv[i]+12, "cwd") == 0)
- save_temps_flag = SAVE_TEMPS_CWD;
- else if (strcmp (argv[i]+12, "obj") == 0
- || strcmp (argv[i]+12, "object") == 0)
- save_temps_flag = SAVE_TEMPS_OBJ;
- else
- fatal ("'%s' is an unknown -save-temps option", argv[i]);
- }
- else if (strcmp (argv[i], "-combine") == 0)
- {
- combine_flag = 1;
- n_switches++;
- }
- else if (strcmp (argv[i], "-specs") == 0)
- {
- struct user_specs *user = XNEW (struct user_specs);
- if (++i >= argc)
- fatal ("argument to '-specs' is missing");
-
- user->next = (struct user_specs *) 0;
- user->filename = argv[i];
- if (user_specs_tail)
- user_specs_tail->next = user;
- else
- user_specs_head = user;
- user_specs_tail = user;
- }
- else if (strncmp (argv[i], "-specs=", 7) == 0)
- {
- struct user_specs *user = XNEW (struct user_specs);
- if (strlen (argv[i]) == 7)
- fatal ("argument to '-specs=' is missing");
-
- user->next = (struct user_specs *) 0;
- user->filename = argv[i] + 7;
- if (user_specs_tail)
- user_specs_tail->next = user;
- else
- user_specs_head = user;
- user_specs_tail = user;
- }
- else if (strcmp (argv[i], "-time") == 0)
- report_times = 1;
- else if (strcmp (argv[i], "-pipe") == 0)
- {
- /* -pipe has to go into the switches array as well as
- setting a flag. */
- use_pipes = 1;
- n_switches++;
- }
- else if (strcmp (argv[i], "-wrapper") == 0)
- {
- if (++i >= argc)
- fatal ("argument to '-wrapper' is missing");
-
- wrapper_string = argv[i];
- n_switches++;
- n_switches++;
- }
- else if (strcmp (argv[i], "-###") == 0)
- {
- /* This is similar to -v except that there is no execution
- of the commands and the echoed arguments are quoted. It
- is intended for use in shell scripts to capture the
- driver-generated command line. */
- verbose_only_flag++;
- verbose_flag++;
- }
- else if (argv[i][0] == '-' && argv[i][1] != 0)
- {
- const char *p = &argv[i][1];
- int c = *p;
-
- switch (c)
- {
- case 'b':
- if (p[1] && NULL == strchr (argv[i] + 2, '-'))
- goto normal_switch;
+ /* Process the options and store input files and switches in their
+ vectors. */
- /* Fall through. */
- case 'V':
- fatal ("'-%c' must come at the start of the command line", c);
- break;
-
- case 'B':
- {
- const char *value;
- int len;
-
- if (p[1] == 0 && i + 1 == argc)
- fatal ("argument to '-B' is missing");
- if (p[1] == 0)
- value = argv[++i];
- else
- value = p + 1;
-
- len = strlen (value);
-
- /* Catch the case where the user has forgotten to append a
- directory separator to the path. Note, they may be using
- -B to add an executable name prefix, eg "i386-elf-", in
- order to distinguish between multiple installations of
- GCC in the same directory. Hence we must check to see
- if appending a directory separator actually makes a
- valid directory name. */
- if (! IS_DIR_SEPARATOR (value [len - 1])
- && is_directory (value, false))
- {
- char *tmp = XNEWVEC (char, len + 2);
- strcpy (tmp, value);
- tmp[len] = DIR_SEPARATOR;
- tmp[++ len] = 0;
- value = tmp;
- }
-
- add_prefix (&exec_prefixes, value, NULL,
- PREFIX_PRIORITY_B_OPT, 0, 0);
- add_prefix (&startfile_prefixes, value, NULL,
- PREFIX_PRIORITY_B_OPT, 0, 0);
- add_prefix (&include_prefixes, value, NULL,
- PREFIX_PRIORITY_B_OPT, 0, 0);
- n_switches++;
- }
- break;
-
- case 'v': /* Print our subcommands and print versions. */
- n_switches++;
- /* If they do anything other than exactly `-v', don't set
- verbose_flag; rather, continue on to give the error. */
- if (p[1] != 0)
- break;
- verbose_flag++;
- break;
-
- case 'S':
- case 'c':
- if (p[1] == 0)
- {
- have_c = 1;
- n_switches++;
- break;
- }
- goto normal_switch;
-
- case 'o':
- have_o = 1;
-#if defined(HAVE_TARGET_EXECUTABLE_SUFFIX)
- if (! have_c)
- {
- int skip;
-
- /* Forward scan, just in case -S or -c is specified
- after -o. */
- int j = i + 1;
- if (p[1] == 0)
- ++j;
- while (j < argc)
- {
- if (argv[j][0] == '-')
- {
- if (SWITCH_CURTAILS_COMPILATION (argv[j][1])
- && argv[j][2] == 0)
- {
- have_c = 1;
- break;
- }
- else if ((skip = SWITCH_TAKES_ARG (argv[j][1])))
- j += skip - (argv[j][2] != 0);
- else if ((skip = WORD_SWITCH_TAKES_ARG (argv[j] + 1)))
- j += skip;
- }
- j++;
- }
- }
-#endif
-#if defined(HAVE_TARGET_EXECUTABLE_SUFFIX) || defined(HAVE_TARGET_OBJECT_SUFFIX)
- if (p[1] == 0)
- argv[i + 1] = convert_filename (argv[i + 1], ! have_c, 0);
- else
- argv[i] = convert_filename (argv[i], ! have_c, 0);
-#endif
- /* Save the output name in case -save-temps=obj was used. */
- save_temps_prefix = xstrdup ((p[1] == 0) ? argv[i + 1] : argv[i] + 1);
- goto normal_switch;
-
- default:
- normal_switch:
-
-#ifdef MODIFY_TARGET_NAME
- is_modify_target_name = 0;
-
- for (j = 0; j < ARRAY_SIZE (modify_target); j++)
- if (! strcmp (argv[i], modify_target[j].sw))
- {
- char *new_name = XNEWVEC (char, strlen (modify_target[j].str)
- + strlen (spec_machine));
- const char *p, *r;
- char *q;
- int made_addition = 0;
-
- is_modify_target_name = 1;
- for (p = spec_machine, q = new_name; *p != 0; )
- {
- if (modify_target[j].add_del == DELETE
- && (! strncmp (q, modify_target[j].str,
- strlen (modify_target[j].str))))
- p += strlen (modify_target[j].str);
- else if (modify_target[j].add_del == ADD
- && ! made_addition && *p == '-')
- {
- for (r = modify_target[j].str; *r != 0; )
- *q++ = *r++;
- made_addition = 1;
- }
-
- *q++ = *p++;
- }
-
- spec_machine = new_name;
- }
-
- if (is_modify_target_name)
- break;
-#endif
+ last_language_n_infiles = -1;
- n_switches++;
+ set_option_handlers (&handlers);
- if (SWITCH_TAKES_ARG (c) > (p[1] != 0))
- i += SWITCH_TAKES_ARG (c) - (p[1] != 0);
- else if (WORD_SWITCH_TAKES_ARG (p))
- i += WORD_SWITCH_TAKES_ARG (p);
- }
+ for (j = 1; j < decoded_options_count; j++)
+ {
+ switch (decoded_options[j].opt_index)
+ {
+ case OPT_S:
+ case OPT_c:
+ case OPT_E:
+ have_c = 1;
+ break;
}
- else
+ if (have_c)
+ break;
+ }
+
+ for (j = 1; j < decoded_options_count; j++)
+ {
+ if (decoded_options[j].opt_index == OPT_SPECIAL_input_file)
{
- n_infiles++;
- lang_n_infiles++;
+ const char *arg = decoded_options[j].arg;
+ const char *p = strrchr (arg, '@');
+ char *fname;
+ long offset;
+ int consumed;
+#ifdef HAVE_TARGET_OBJECT_SUFFIX
+ arg = convert_filename (arg, 0, access (arg, F_OK));
+#endif
+ /* For LTO static archive support we handle input file
+ specifications that are composed of a filename and
+ an offset like FNAME@OFFSET. */
+ if (p
+ && p != arg
+ && sscanf (p, "@%li%n", &offset, &consumed) >= 1
+ && strlen (p) == (unsigned int)consumed)
+ {
+ fname = (char *)xmalloc (p - arg + 1);
+ memcpy (fname, arg, p - arg);
+ fname[p - arg] = '\0';
+ /* Only accept non-stdin and existing FNAME parts, otherwise
+ try with the full name. */
+ if (strcmp (fname, "-") == 0 || access (fname, F_OK) < 0)
+ {
+ free (fname);
+ fname = xstrdup (arg);
+ }
+ }
+ else
+ fname = xstrdup (arg);
+
+ if (strcmp (fname, "-") != 0 && access (fname, F_OK) < 0)
+ perror_with_name (fname);
+ else
+ add_infile (arg, spec_lang);
+
+ free (fname);
+ continue;
}
+
+ read_cmdline_option (&global_options, &global_options_set,
+ decoded_options + j, UNKNOWN_LOCATION,
+ CL_DRIVER, &handlers, global_dc);
}
/* If -save-temps=obj and -o name, create the prefix to use for %b.
{
/* -save-temps overrides -pipe, so that temp files are produced */
if (save_temps_flag)
- error ("warning: -pipe ignored because -save-temps specified");
+ warning (0, "-pipe ignored because -save-temps specified");
use_pipes = 0;
}
+ if (!compare_debug)
+ {
+ const char *gcd = getenv ("GCC_COMPARE_DEBUG");
+
+ if (gcd && gcd[0] == '-')
+ {
+ compare_debug = 2;
+ compare_debug_opt = gcd;
+ }
+ else if (gcd && *gcd && strcmp (gcd, "0"))
+ {
+ compare_debug = 3;
+ compare_debug_opt = "-gtoggle";
+ }
+ }
+ else if (compare_debug < 0)
+ {
+ compare_debug = 0;
+ gcc_assert (!compare_debug_opt);
+ }
+
/* Set up the search paths. We add directories that we expect to
contain GNU Toolchain components before directories specified by
the machine description so that we will find GNU components (like
- the GNU assembler) before those of the host system. */
+ the GNU assembler) before those of the host system. */
/* If we don't know where the toolchain has been installed, use the
configured-in locations. */
PREFIX_PRIORITY_LAST, 1, 0);
}
- /* If not cross-compiling, search well-known system locations. */
- if (*cross_compile == '0')
- {
-#ifndef OS2
- add_prefix (&exec_prefixes, standard_exec_prefix_1, "BINUTILS",
- PREFIX_PRIORITY_LAST, 2, 0);
- add_prefix (&exec_prefixes, standard_exec_prefix_2, "BINUTILS",
- PREFIX_PRIORITY_LAST, 2, 0);
-#endif
- add_prefix (&startfile_prefixes, standard_exec_prefix_2, "BINUTILS",
- PREFIX_PRIORITY_LAST, 1, 0);
- }
-
gcc_assert (!IS_ABSOLUTE_PATH (tooldir_base_prefix));
tooldir_prefix = concat (tooldir_base_prefix, spec_machine,
dir_separator_str, NULL);
then consider it to relocate with the rest of the GCC installation
if GCC_EXEC_PREFIX is set.
``make_relative_prefix'' is not compiled for VMS, so don't call it. */
- if (target_system_root && gcc_exec_prefix)
+ if (target_system_root && !target_system_root_changed && gcc_exec_prefix)
{
- char *tmp_prefix = make_relative_prefix (argv[0],
- standard_bindir_prefix,
- target_system_root);
+ char *tmp_prefix = get_relative_prefix (decoded_options[0].arg,
+ standard_bindir_prefix,
+ target_system_root);
if (tmp_prefix && access_check (tmp_prefix, F_OK) == 0)
{
target_system_root = tmp_prefix;
/* More prefixes are enabled in main, after we read the specs file
and determine whether this is cross-compilation or not. */
- /* Then create the space for the vectors and scan again. */
-
- switches = XNEWVEC (struct switchstr, n_switches + 1);
- infiles = XNEWVEC (struct infile, n_infiles + 1);
- n_switches = 0;
- n_infiles = 0;
- last_language_n_infiles = -1;
-
- /* This, time, copy the text of each switch and store a pointer
- to the copy in the vector of switches.
- Store all the infiles in their vector. */
+ if (n_infiles == last_language_n_infiles && spec_lang != 0)
+ warning (0, "%<-x %s%> after last input file has no effect", spec_lang);
- for (i = 1; i < argc; i++)
+ if (compare_debug == 2 || compare_debug == 3)
{
- /* Just skip the switches that were handled by the preceding loop. */
-#ifdef MODIFY_TARGET_NAME
- is_modify_target_name = 0;
-
- for (j = 0; j < ARRAY_SIZE (modify_target); j++)
- if (! strcmp (argv[i], modify_target[j].sw))
- is_modify_target_name = 1;
-
- if (is_modify_target_name)
- ;
- else
-#endif
- if (! strncmp (argv[i], "-Wa,", 4))
- ;
- else if (! strncmp (argv[i], "-Wp,", 4))
- ;
- else if (! strcmp (argv[i], "-pass-exit-codes"))
- ;
- else if (! strcmp (argv[i], "-print-search-dirs"))
- ;
- else if (! strcmp (argv[i], "-print-libgcc-file-name"))
- ;
- else if (! strncmp (argv[i], "-print-file-name=", 17))
- ;
- else if (! strncmp (argv[i], "-print-prog-name=", 17))
- ;
- else if (! strcmp (argv[i], "-print-multi-lib"))
- ;
- else if (! strcmp (argv[i], "-print-multi-directory"))
- ;
- else if (! strcmp (argv[i], "-print-sysroot"))
- ;
- else if (! strcmp (argv[i], "-print-multi-os-directory"))
- ;
- else if (! strcmp (argv[i], "-print-sysroot-headers-suffix"))
- ;
- else if (! strncmp (argv[i], "--sysroot=", strlen ("--sysroot=")))
- {
- target_system_root = argv[i] + strlen ("--sysroot=");
- target_system_root_changed = 1;
- }
- else if (argv[i][0] == '+' && argv[i][1] == 'e')
- {
- /* Compensate for the +e options to the C++ front-end;
- they're there simply for cfront call-compatibility. We do
- some magic in default_compilers to pass them down properly.
- Note we deliberately start at the `+' here, to avoid passing
- -e0 or -e1 down into the linker. */
- switches[n_switches].part1 = &argv[i][0];
- switches[n_switches].args = 0;
- switches[n_switches].live_cond = 0;
- switches[n_switches].validated = 0;
- n_switches++;
- }
- else if (strncmp (argv[i], "-Wl,", 4) == 0)
- {
- int prev, j;
- /* Split the argument at commas. */
- prev = 4;
- for (j = 4; argv[i][j]; j++)
- if (argv[i][j] == ',')
- {
- infiles[n_infiles].language = "*";
- infiles[n_infiles++].name
- = save_string (argv[i] + prev, j - prev);
- prev = j + 1;
- }
- /* Record the part after the last comma. */
- infiles[n_infiles].language = "*";
- infiles[n_infiles++].name = argv[i] + prev;
- }
- else if (strcmp (argv[i], "-Xlinker") == 0)
- {
- infiles[n_infiles].language = "*";
- infiles[n_infiles++].name = argv[++i];
- }
- /* Xassembler and Xpreprocessor were already handled in the first argv
- scan, so all we need to do here is ignore them and their argument. */
- else if (strcmp (argv[i], "-Xassembler") == 0)
- i++;
- else if (strcmp (argv[i], "-Xpreprocessor") == 0)
- i++;
- else if (strcmp (argv[i], "-l") == 0)
- { /* POSIX allows separation of -l and the lib arg;
- canonicalize by concatenating -l with its arg */
- infiles[n_infiles].language = "*";
- infiles[n_infiles++].name = concat ("-l", argv[++i], NULL);
- }
- else if (strncmp (argv[i], "-l", 2) == 0)
- {
- infiles[n_infiles].language = "*";
- infiles[n_infiles++].name = argv[i];
- }
- else if (strcmp (argv[i], "-wrapper") == 0)
- i++;
- else if (strcmp (argv[i], "-specs") == 0)
- i++;
- else if (strncmp (argv[i], "-specs=", 7) == 0)
- ;
- else if (strcmp (argv[i], "-time") == 0)
- ;
- else if (strcmp (argv[i], "-###") == 0)
- ;
- else if (argv[i][0] == '-' && argv[i][1] != 0)
- {
- const char *p = &argv[i][1];
- int c = *p;
-
- if (c == 'x')
- {
- if (p[1] == 0 && i + 1 == argc)
- fatal ("argument to '-x' is missing");
- if (p[1] == 0)
- spec_lang = argv[++i];
- else
- spec_lang = p + 1;
- if (! strcmp (spec_lang, "none"))
- /* Suppress the warning if -xnone comes after the last input
- file, because alternate command interfaces like g++ might
- find it useful to place -xnone after each input file. */
- spec_lang = 0;
- else
- last_language_n_infiles = n_infiles;
- continue;
- }
- switches[n_switches].part1 = p;
- /* Deal with option arguments in separate argv elements. */
- if ((SWITCH_TAKES_ARG (c) > (p[1] != 0))
- || WORD_SWITCH_TAKES_ARG (p))
- {
- int j = 0;
- int n_args = WORD_SWITCH_TAKES_ARG (p);
-
- if (n_args == 0)
- {
- /* Count only the option arguments in separate argv elements. */
- n_args = SWITCH_TAKES_ARG (c) - (p[1] != 0);
- }
- if (i + n_args >= argc)
- fatal ("argument to '-%s' is missing", p);
- switches[n_switches].args
- = XNEWVEC (const char *, n_args + 1);
- while (j < n_args)
- switches[n_switches].args[j++] = argv[++i];
- /* Null-terminate the vector. */
- switches[n_switches].args[j] = 0;
- }
- else if (strchr (switches_need_spaces, c))
- {
- /* On some systems, ld cannot handle some options without
- a space. So split the option from its argument. */
- char *part1 = XNEWVEC (char, 2);
- part1[0] = c;
- part1[1] = '\0';
-
- switches[n_switches].part1 = part1;
- switches[n_switches].args = XNEWVEC (const char *, 2);
- switches[n_switches].args[0] = xstrdup (p+1);
- switches[n_switches].args[1] = 0;
- }
- else
- switches[n_switches].args = 0;
-
- switches[n_switches].live_cond = 0;
- switches[n_switches].validated = 0;
- switches[n_switches].ordering = 0;
- /* These are always valid, since gcc.c itself understands the
- first four and gfortranspec.c understands -static-libgfortran. */
- if (!strcmp (p, "save-temps")
- || !strcmp (p, "static-libgcc")
- || !strcmp (p, "shared-libgcc")
- || !strcmp (p, "pipe")
- || !strcmp (p, "static-libgfortran"))
- switches[n_switches].validated = 1;
- else
- {
- char ch = switches[n_switches].part1[0];
- if (ch == 'B')
- switches[n_switches].validated = 1;
- }
- n_switches++;
- }
- else
- {
-#ifdef HAVE_TARGET_OBJECT_SUFFIX
- argv[i] = convert_filename (argv[i], 0, access (argv[i], F_OK));
-#endif
-
- if (strcmp (argv[i], "-") != 0 && access (argv[i], F_OK) < 0)
- {
- perror_with_name (argv[i]);
- error_count++;
- }
- else
- {
- infiles[n_infiles].language = spec_lang;
- infiles[n_infiles++].name = argv[i];
- }
- }
+ alloc_switch ();
+ switches[n_switches].part1 = concat ("fcompare-debug=",
+ compare_debug_opt,
+ NULL);
+ switches[n_switches].args = 0;
+ switches[n_switches].live_cond = 0;
+ switches[n_switches].validated = 0;
+ switches[n_switches].ordering = 0;
+ n_switches++;
+ compare_debug = 1;
}
- if (n_infiles == last_language_n_infiles && spec_lang != 0)
- error ("warning: '-x %s' after last input file has no effect", spec_lang);
-
/* Ensure we only invoke each subprocess once. */
- if (print_subprocess_help || print_help_list)
+ if (print_subprocess_help || print_help_list || print_version)
{
- n_infiles = 1;
+ n_infiles = 0;
/* Create a dummy input file, so that we can pass
the help option on to the various sub-processes. */
- infiles[0].language = "c";
- infiles[0].name = "help-dummy";
+ add_infile ("help-dummy", "c");
}
+ alloc_switch ();
switches[n_switches].part1 = 0;
+ alloc_infile ();
infiles[n_infiles].name = 0;
}
sans all directory names, and basename_length is the number
of characters starting there excluding the suffix .c or whatever. */
-static const char *input_filename;
+static const char *gcc_input_filename;
static int input_file_number;
size_t input_filename_length;
static int basename_length;
search dirs for it. */
static int this_is_library_file;
+/* Nonzero means %T has been seen; the next arg to be terminated
+ is the name of a linker script and we should try all of the
+ standard search dirs for it. If it is found insert a --script
+ command line switch and then substitute the full path in place,
+ otherwise generate an error message. */
+static int this_is_linker_script;
+
/* Nonzero means that the input of this command is coming from a pipe. */
static int input_from_pipe;
string = XOBFINISH (&obstack, const char *);
if (this_is_library_file)
string = find_file (string);
+ if (this_is_linker_script)
+ {
+ char * full_script_path = find_a_file (&startfile_prefixes, string, R_OK, true);
+
+ if (full_script_path == NULL)
+ {
+ error ("unable to locate default linker script %qs in the library search paths", string);
+ /* Script was not found on search path. */
+ return;
+ }
+ store_arg ("--script", false, false);
+ string = full_script_path;
+ }
store_arg (string, delete_this_arg, this_is_output_file);
if (this_is_output_file)
outfiles[input_file_number] = string;
int i;
char *buf = xstrdup (wrapper);
char *p = buf;
+ unsigned int old_length = VEC_length (const_char_p, argbuf);
do
{
}
while ((p = strchr (p, ',')) != NULL);
- if (argbuf_index + n >= argbuf_length)
- {
- argbuf_length = argbuf_length * 2;
- while (argbuf_length < argbuf_index + n)
- argbuf_length *= 2;
- argbuf = XRESIZEVEC (const char *, argbuf, argbuf_length);
- }
- for (i = argbuf_index - 1; i >= 0; i--)
- argbuf[i + n] = argbuf[i];
+ VEC_safe_grow (const_char_p, heap, argbuf, old_length + n);
+ memmove (VEC_address (const_char_p, argbuf) + n,
+ VEC_address (const_char_p, argbuf),
+ old_length * sizeof (const_char_p));
i = 0;
p = buf;
*p = 0;
p++;
}
- argbuf[i++] = p;
+ VEC_replace (const_char_p, argbuf, i, p);
+ i++;
}
while ((p = strchr (p, ',')) != NULL);
gcc_assert (i == n);
- argbuf_index += n;
}
/* Process the spec SPEC and run the commands specified therein.
If -pipe, this forces out the last command if it ended in `|'. */
if (value == 0)
{
- if (argbuf_index > 0 && !strcmp (argbuf[argbuf_index - 1], "|"))
- argbuf_index--;
+ if (VEC_length (const_char_p, argbuf) > 0
+ && !strcmp (VEC_last (const_char_p, argbuf), "|"))
+ VEC_pop (const_char_p, argbuf);
set_collect_gcc_options ();
- if (argbuf_index > 0)
+ if (VEC_length (const_char_p, argbuf) > 0)
value = execute ();
}
delete_this_arg = 0;
this_is_output_file = 0;
this_is_library_file = 0;
+ this_is_linker_script = 0;
input_from_pipe = 0;
suffix_subst = NULL;
static void
do_self_spec (const char *spec)
{
+ int i;
+
do_spec_2 (spec);
do_spec_1 (" ", 0, NULL);
- if (argbuf_index > 0)
+ /* Mark %<S switches processed by do_self_spec to be ignored permanently.
+ do_self_specs adds the replacements to switches array, so it shouldn't
+ be processed afterwards. */
+ for (i = 0; i < n_switches; i++)
+ if ((switches[i].live_cond & SWITCH_IGNORE))
+ switches[i].live_cond |= SWITCH_IGNORE_PERMANENTLY;
+
+ if (VEC_length (const_char_p, argbuf) > 0)
{
- int i, first;
+ const char **argbuf_copy;
+ struct cl_decoded_option *decoded_options;
+ struct cl_option_handlers handlers;
+ unsigned int decoded_options_count;
+ unsigned int j;
+
+ /* Create a copy of argbuf with a dummy argv[0] entry for
+ decode_cmdline_options_to_array. */
+ argbuf_copy = XNEWVEC (const char *,
+ VEC_length (const_char_p, argbuf) + 1);
+ argbuf_copy[0] = "";
+ memcpy (argbuf_copy + 1, VEC_address (const_char_p, argbuf),
+ VEC_length (const_char_p, argbuf) * sizeof (const char *));
+
+ decode_cmdline_options_to_array (VEC_length (const_char_p, argbuf) + 1,
+ argbuf_copy,
+ CL_DRIVER, &decoded_options,
+ &decoded_options_count);
+
+ set_option_handlers (&handlers);
+
+ for (j = 1; j < decoded_options_count; j++)
+ {
+ switch (decoded_options[j].opt_index)
+ {
+ case OPT_SPECIAL_input_file:
+ /* Specs should only generate options, not input
+ files. */
+ if (strcmp (decoded_options[j].arg, "-") != 0)
+ fatal_error ("switch %qs does not start with %<-%>",
+ decoded_options[j].arg);
+ else
+ fatal_error ("spec-generated switch is just %<-%>");
+ break;
- first = n_switches;
- n_switches += argbuf_index;
- switches = XRESIZEVEC (struct switchstr, switches, n_switches + 1);
+ case OPT_fcompare_debug_second:
+ case OPT_fcompare_debug:
+ case OPT_fcompare_debug_:
+ case OPT_o:
+ /* Avoid duplicate processing of some options from
+ compare-debug specs; just save them here. */
+ save_switch (decoded_options[j].canonical_option[0],
+ (decoded_options[j].canonical_option_num_elements
+ - 1),
+ &decoded_options[j].canonical_option[1], false);
+ break;
- switches[n_switches] = switches[first];
- for (i = 0; i < argbuf_index; i++)
- {
- struct switchstr *sw;
-
- /* Each switch should start with '-'. */
- if (argbuf[i][0] != '-')
- fatal ("switch '%s' does not start with '-'", argbuf[i]);
-
- sw = &switches[i + first];
- sw->part1 = &argbuf[i][1];
- sw->args = 0;
- sw->live_cond = 0;
- sw->validated = 0;
- sw->ordering = 0;
+ default:
+ read_cmdline_option (&global_options, &global_options_set,
+ decoded_options + j, UNKNOWN_LOCATION,
+ CL_DRIVER, &handlers, global_dc);
+ break;
+ }
}
+
+ alloc_switch ();
+ switches[n_switches].part1 = 0;
}
}
return NULL;
}
+/* Create a temporary FILE with the contents of ARGV. Add @FILE to the
+ argument list. */
+
+static void
+create_at_file (char **argv)
+{
+ char *temp_file = make_temp_file ("");
+ char *at_argument = concat ("@", temp_file, NULL);
+ FILE *f = fopen (temp_file, "w");
+ int status;
+
+ if (f == NULL)
+ fatal_error ("could not open temporary response file %s",
+ temp_file);
+
+ status = writeargv (argv, f);
+
+ if (status)
+ fatal_error ("could not write to temporary response file %s",
+ temp_file);
+
+ status = fclose (f);
+
+ if (EOF == status)
+ fatal_error ("could not close temporary response file %s",
+ temp_file);
+
+ store_arg (at_argument, 0, 0);
+
+ record_temp_file (temp_file, !save_temps_flag, !save_temps_flag);
+}
+
+/* True if we should compile INFILE. */
+
+static bool
+compile_input_file_p (struct infile *infile)
+{
+ if ((!infile->language) || (infile->language[0] != '*'))
+ if (infile->incompiler == input_file_compiler)
+ return true;
+ return false;
+}
+
+/* Process each member of VEC as a spec. */
+
+static void
+do_specs_vec (VEC(char_p,heap) *vec)
+{
+ unsigned ix;
+ char *opt;
+
+ FOR_EACH_VEC_ELT (char_p, vec, ix, opt)
+ {
+ do_spec_1 (opt, 1, NULL);
+ /* Make each accumulated option a separate argument. */
+ do_spec_1 (" ", 0, NULL);
+ }
+}
+
/* Process the sub-spec SPEC as a portion of a larger spec.
This is like processing a whole spec except that we do
not initialize at the beginning and we do not supply a
case '\n':
end_going_arg ();
- if (argbuf_index > 0 && !strcmp (argbuf[argbuf_index - 1], "|"))
+ if (VEC_length (const_char_p, argbuf) > 0
+ && !strcmp (VEC_last (const_char_p, argbuf), "|"))
{
/* A `|' before the newline means use a pipe here,
but only if -pipe was specified.
break;
}
else
- argbuf_index--;
+ VEC_pop (const_char_p, argbuf);
}
set_collect_gcc_options ();
- if (argbuf_index > 0)
+ if (VEC_length (const_char_p, argbuf) > 0)
{
value = execute ();
if (value)
delete_this_arg = 0;
this_is_output_file = 0;
this_is_library_file = 0;
+ this_is_linker_script = 0;
input_from_pipe = 0;
break;
delete_this_arg = 0;
this_is_output_file = 0;
this_is_library_file = 0;
+ this_is_linker_script = 0;
break;
case '%':
switch (c = *p++)
{
case 0:
- fatal ("spec '%s' invalid", spec);
+ fatal_error ("spec %qs invalid", spec);
case 'b':
if (save_temps_length)
obstack_grow (&obstack, save_temps_prefix, save_temps_length);
else
obstack_grow (&obstack, input_basename, basename_length);
+ if (compare_debug < 0)
+ obstack_grow (&obstack, ".gk", 3);
arg_going = 1;
break;
obstack_grow (&obstack, save_temps_prefix, save_temps_length);
else
obstack_grow (&obstack, input_basename, suffixed_basename_length);
+ if (compare_debug < 0)
+ obstack_grow (&obstack, ".gk", 3);
arg_going = 1;
break;
buf = (char *) alloca (p - q + 1);
strncpy (buf, q, p - q);
buf[p - q] = 0;
- error ("%s", buf);
+ error ("%s", _(buf));
return -1;
}
break;
buf = (char *) alloca (p - q + 1);
strncpy (buf, q, p - q);
buf[p - q] = 0;
- notice ("%s\n", buf);
+ inform (0, "%s", _(buf));
if (*p)
p++;
}
p += 2;
/* We don't support extra suffix characters after %O. */
if (*p == '.' || ISALNUM ((unsigned char) *p))
- fatal ("spec '%s' has invalid '%%0%c'", spec, *p);
+ fatal_error ("spec %qs has invalid %<%%0%c%>", spec, *p);
if (suffix_length == 0)
suffix = TARGET_OBJECT_SUFFIX;
else
suffix_length += strlen (TARGET_OBJECT_SUFFIX);
}
+ if (compare_debug < 0)
+ {
+ suffix = concat (".gk", suffix, NULL);
+ suffix_length += 3;
+ }
+
/* If -save-temps=obj and -o were specified, use that for the
temp file. */
if (save_temps_length)
break;
}
- /* If the input_filename has the same suffix specified
+ /* If the gcc_input_filename has the same suffix specified
for the %g, %u, or %U, and -save-temps is specified,
we could end up using that file as an intermediate
thus clobbering the user's source file (.e.g.,
tmp[basename_length + suffix_length] = '\0';
temp_filename = tmp;
- if (strcmp (temp_filename, input_filename) != 0)
+ if (strcmp (temp_filename, gcc_input_filename) != 0)
{
#ifndef HOST_LACKS_INODE_NUMBERS
struct stat st_temp;
/* Note, set_input() resets input_stat_set to 0. */
if (input_stat_set == 0)
{
- input_stat_set = stat (input_filename, &input_stat);
+ input_stat_set = stat (gcc_input_filename,
+ &input_stat);
if (input_stat_set >= 0)
input_stat_set = 1;
}
- /* If we have the stat for the input_filename
+ /* If we have the stat for the gcc_input_filename
and we can do the stat for the temp_filename
then the they could still refer to the same
file if st_dev/st_ino's are the same. */
|| input_stat.st_ino != st_temp.st_ino)
#else
/* Just compare canonical pathnames. */
- char* input_realname = lrealpath (input_filename);
+ char* input_realname = lrealpath (gcc_input_filename);
char* temp_realname = lrealpath (temp_filename);
bool files_differ = strcmp (input_realname, temp_realname);
free (input_realname);
case 'i':
if (combine_inputs)
{
- for (i = 0; (int) i < n_infiles; i++)
- if ((!infiles[i].language) || (infiles[i].language[0] != '*'))
- if (infiles[i].incompiler == input_file_compiler)
+ if (at_file_supplied)
+ {
+ /* We are going to expand `%i' to `@FILE', where FILE
+ is a newly-created temporary filename. The filenames
+ that would usually be expanded in place of %o will be
+ written to the temporary file. */
+ char **argv;
+ int n_files = 0;
+ int j;
+
+ for (i = 0; i < n_infiles; i++)
+ if (compile_input_file_p (&infiles[i]))
+ n_files++;
+
+ argv = (char **) alloca (sizeof (char *) * (n_files + 1));
+
+ /* Copy the strings over. */
+ for (i = 0, j = 0; i < n_infiles; i++)
+ if (compile_input_file_p (&infiles[i]))
+ {
+ argv[j] = CONST_CAST (char *, infiles[i].name);
+ infiles[i].compiled = true;
+ j++;
+ }
+ argv[j] = NULL;
+
+ create_at_file (argv);
+ }
+ else
+ for (i = 0; (int) i < n_infiles; i++)
+ if (compile_input_file_p (&infiles[i]))
{
store_arg (infiles[i].name, 0, 0);
infiles[i].compiled = true;
}
else
{
- obstack_grow (&obstack, input_filename, input_filename_length);
+ obstack_grow (&obstack, gcc_input_filename,
+ input_filename_length);
arg_going = 1;
}
break;
that would usually be expanded in place of %o will be
written to the temporary file. */
- char *temp_file = make_temp_file ("");
- char *at_argument;
char **argv;
- int n_files, j, status;
- FILE *f;
-
- at_argument = concat ("@", temp_file, NULL);
- store_arg (at_argument, 0, 0);
+ int n_files, j;
/* Convert OUTFILES into a form suitable for writeargv. */
}
argv[j] = NULL;
- f = fopen (temp_file, "w");
-
- if (f == NULL)
- fatal ("could not open temporary response file %s",
- temp_file);
-
- status = writeargv (argv, f);
-
- if (status)
- fatal ("could not write to temporary response file %s",
- temp_file);
-
- status = fclose (f);
-
- if (EOF == status)
- fatal ("could not close temporary response file %s",
- temp_file);
-
- record_temp_file (temp_file, !save_temps_flag, !save_temps_flag);
+ create_at_file (argv);
}
else
for (i = 0; i < max; i++)
this_is_library_file = 1;
break;
+ case 'T':
+ this_is_linker_script = 1;
+ break;
+
case 'V':
outfiles[input_file_number] = NULL;
break;
case 'W':
{
- int cur_index = argbuf_index;
+ unsigned int cur_index = VEC_length (const_char_p, argbuf);
/* Handle the {...} following the %W. */
if (*p != '{')
- fatal ("spec '%s' has invalid '%%W%c", spec, *p);
+ fatal_error ("spec %qs has invalid %<%%W%c%>", spec, *p);
p = handle_braces (p + 1);
if (p == 0)
return -1;
end_going_arg ();
/* If any args were output, mark the last one for deletion
on failure. */
- if (argbuf_index != cur_index)
- record_temp_file (argbuf[argbuf_index - 1], 0, 1);
+ if (VEC_length (const_char_p, argbuf) != cur_index)
+ record_temp_file (VEC_last (const_char_p, argbuf), 0, 1);
break;
}
{
const char *p1 = p;
char *string;
+ char *opt;
+ unsigned ix;
/* Skip past the option value and make a copy. */
if (*p != '{')
- fatal ("spec '%s' has invalid '%%x%c'", spec, *p);
+ fatal_error ("spec %qs has invalid %<%%x%c%>", spec, *p);
while (*p++ != '}')
;
string = save_string (p1 + 1, p - p1 - 2);
/* See if we already recorded this option. */
- for (i = 0; i < n_linker_options; i++)
- if (! strcmp (string, linker_options[i]))
+ FOR_EACH_VEC_ELT (char_p, linker_options, ix, opt)
+ if (! strcmp (string, opt))
{
free (string);
return 0;
/* Dump out the options accumulated previously using %x. */
case 'X':
- for (i = 0; i < n_linker_options; i++)
- {
- do_spec_1 (linker_options[i], 1, NULL);
- /* Make each accumulated option a separate argument. */
- do_spec_1 (" ", 0, NULL);
- }
+ do_specs_vec (linker_options);
break;
/* Dump out the options accumulated previously using -Wa,. */
case 'Y':
- for (i = 0; i < n_assembler_options; i++)
- {
- do_spec_1 (assembler_options[i], 1, NULL);
- /* Make each accumulated option a separate argument. */
- do_spec_1 (" ", 0, NULL);
- }
+ do_specs_vec (assembler_options);
break;
/* Dump out the options accumulated previously using -Wp,. */
case 'Z':
- for (i = 0; i < n_preprocessor_options; i++)
- {
- do_spec_1 (preprocessor_options[i], 1, NULL);
- /* Make each accumulated option a separate argument. */
- do_spec_1 (" ", 0, NULL);
- }
+ do_specs_vec (preprocessor_options);
break;
/* Here are digits and numbers that just process
/* Catch the case where a spec string contains something like
'%{foo:%*}'. i.e. there is no * in the pattern on the left
hand side of the :. */
- error ("spec failure: '%%*' has not been initialized by pattern match");
+ error ("spec failure: %<%%*%> has not been initialized by pattern match");
break;
/* Process a string found as the value of a spec given by name.
%[...] modifies -D options the way %P does;
%(...) uses the spec unmodified. */
case '[':
- error ("warning: use of obsolete %%[ operator in specs");
+ warning (0, "use of obsolete %%[ operator in specs");
case '(':
{
const char *name = p;
{
name = *(sl->ptr_spec);
#ifdef DEBUG_SPECS
- notice ("Processing spec %c%s%c, which is '%s'\n",
+ fnotice (stderr, "Processing spec %c%s%c, which is '%s'\n",
c, sl->name, (c == '(') ? ')' : ']', name);
#endif
break;
break;
default:
- error ("spec failure: unrecognized spec option '%c'", c);
+ error ("spec failure: unrecognized spec option %qc", c);
break;
}
break;
const char *funcval;
/* Saved spec processing context. */
- int save_argbuf_index;
- int save_argbuf_length;
- const char **save_argbuf;
+ VEC(const_char_p,heap) *save_argbuf;
int save_arg_going;
int save_delete_this_arg;
int save_this_is_output_file;
int save_this_is_library_file;
int save_input_from_pipe;
+ int save_this_is_linker_script;
const char *save_suffix_subst;
sf = lookup_spec_function (func);
if (sf == NULL)
- fatal ("unknown spec function '%s'", func);
+ fatal_error ("unknown spec function %qs", func);
/* Push the spec processing context. */
- save_argbuf_index = argbuf_index;
- save_argbuf_length = argbuf_length;
save_argbuf = argbuf;
save_arg_going = arg_going;
save_delete_this_arg = delete_this_arg;
save_this_is_output_file = this_is_output_file;
save_this_is_library_file = this_is_library_file;
+ save_this_is_linker_script = this_is_linker_script;
save_input_from_pipe = input_from_pipe;
save_suffix_subst = suffix_subst;
alloc_args ();
if (do_spec_2 (args) < 0)
- fatal ("error in args to spec function '%s'", func);
+ fatal_error ("error in args to spec function %qs", func);
/* argbuf_index is an index for the next argument to be inserted, and
so contains the count of the args already inserted. */
- funcval = (*sf->func) (argbuf_index, argbuf);
+ funcval = (*sf->func) (VEC_length (const_char_p, argbuf),
+ VEC_address (const_char_p, argbuf));
/* Pop the spec processing context. */
- argbuf_index = save_argbuf_index;
- argbuf_length = save_argbuf_length;
- free (argbuf);
+ VEC_free (const_char_p, heap, argbuf);
argbuf = save_argbuf;
arg_going = save_arg_going;
delete_this_arg = save_delete_this_arg;
this_is_output_file = save_this_is_output_file;
this_is_library_file = save_this_is_library_file;
+ this_is_linker_script = save_this_is_linker_script;
input_from_pipe = save_input_from_pipe;
suffix_subst = save_suffix_subst;
break;
/* Only allow [A-Za-z0-9], -, and _ in function names. */
if (!ISALNUM (*endp) && !(*endp == '-' || *endp == '_'))
- fatal ("malformed spec function name");
+ fatal_error ("malformed spec function name");
}
if (*endp != '(') /* ) */
- fatal ("no arguments for spec function");
+ fatal_error ("no arguments for spec function");
func = save_string (p, endp - p);
p = ++endp;
}
/* ( */
if (*endp != ')')
- fatal ("malformed spec function arguments");
+ fatal_error ("malformed spec function arguments");
args = save_string (p, endp - p);
p = ++endp;
if (atom == end_atom)
{
if (!n_way_choice || disj_matched || *p == '|'
- || a_is_negated || a_is_suffix || a_is_spectype
+ || a_is_negated || a_is_suffix || a_is_spectype
|| a_is_starred)
goto invalid;
{
if ((a_is_suffix || a_is_spectype) && a_is_starred)
goto invalid;
-
+
if (!a_is_starred)
disj_starred = false;
a_matched = input_spec_matches (atom, end_atom);
else
a_matched = switch_matches (atom, end_atom, a_is_starred);
-
+
if (a_matched != a_is_negated)
{
disj_matched = true;
return p;
invalid:
- fatal ("braced spec '%s' is invalid at '%c'", orig, *p);
+ fatal_error ("braced spec %qs is invalid at %qc", orig, *p);
#undef SKIP_WHITE
}
return p;
invalid:
- fatal ("braced spec body '%s' is invalid", body);
+ fatal_error ("braced spec body %qs is invalid", body);
}
\f
/* Return 0 iff switch number SWITCHNUM is obsoleted by a later switch
const char *name = switches[switchnum].part1;
int i;
+ /* If we already processed this switch and determined if it was
+ live or not, return our past determination. */
+ if (switches[switchnum].live_cond != 0)
+ return ((switches[switchnum].live_cond & SWITCH_LIVE) != 0
+ && (switches[switchnum].live_cond & SWITCH_FALSE) == 0
+ && (switches[switchnum].live_cond & SWITCH_IGNORE_PERMANENTLY)
+ == 0);
+
/* In the common case of {<at-most-one-letter>*}, a negating
switch would always match, so ignore that case. We will just
send the conflicting switches to the compiler phase. */
if (prefix_length >= 0 && prefix_length <= 1)
return 1;
- /* If we already processed this switch and determined if it was
- live or not, return our past determination. */
- if (switches[switchnum].live_cond != 0)
- return ((switches[switchnum].live_cond & SWITCH_LIVE) != 0
- && (switches[switchnum].live_cond & SWITCH_FALSE) == 0);
-
/* Now search for duplicate in a manner that depends on the name. */
switch (*name)
{
{
const char *p;
- input_filename = filename;
- input_filename_length = strlen (input_filename);
- input_basename = lbasename (input_filename);
+ gcc_input_filename = filename;
+ input_filename_length = strlen (gcc_input_filename);
+ input_basename = lbasename (gcc_input_filename);
/* Find a suffix starting with the last period,
and set basename_length to exclude that suffix. */
input_suffix = "";
/* If a spec for 'g', 'u', or 'U' is seen with -save-temps then
- we will need to do a stat on the input_filename. The
+ we will need to do a stat on the gcc_input_filename. The
INPUT_STAT_SET signals that the stat is needed. */
input_stat_set = 0;
}
/* On fatal signals, delete all the temporary files. */
static void
-fatal_error (int signum)
+fatal_signal (int signum)
{
signal (signum, SIG_DFL);
delete_failure_queue ();
kill (getpid (), signum);
}
+/* Compare the contents of the two files named CMPFILE[0] and
+ CMPFILE[1]. Return zero if they're identical, nonzero
+ otherwise. */
+
+static int
+compare_files (char *cmpfile[])
+{
+ int ret = 0;
+ FILE *temp[2] = { NULL, NULL };
+ int i;
+
+#if HAVE_MMAP_FILE
+ {
+ size_t length[2];
+ void *map[2] = { NULL, NULL };
+
+ for (i = 0; i < 2; i++)
+ {
+ struct stat st;
+
+ if (stat (cmpfile[i], &st) < 0 || !S_ISREG (st.st_mode))
+ {
+ error ("%s: could not determine length of compare-debug file %s",
+ gcc_input_filename, cmpfile[i]);
+ ret = 1;
+ break;
+ }
+
+ length[i] = st.st_size;
+ }
+
+ if (!ret && length[0] != length[1])
+ {
+ error ("%s: -fcompare-debug failure (length)", gcc_input_filename);
+ ret = 1;
+ }
+
+ if (!ret)
+ for (i = 0; i < 2; i++)
+ {
+ int fd = open (cmpfile[i], O_RDONLY);
+ if (fd < 0)
+ {
+ error ("%s: could not open compare-debug file %s",
+ gcc_input_filename, cmpfile[i]);
+ ret = 1;
+ break;
+ }
+
+ map[i] = mmap (NULL, length[i], PROT_READ, MAP_PRIVATE, fd, 0);
+ close (fd);
+
+ if (map[i] == (void *) MAP_FAILED)
+ {
+ ret = -1;
+ break;
+ }
+ }
+
+ if (!ret)
+ {
+ if (memcmp (map[0], map[1], length[0]) != 0)
+ {
+ error ("%s: -fcompare-debug failure", gcc_input_filename);
+ ret = 1;
+ }
+ }
+
+ for (i = 0; i < 2; i++)
+ if (map[i])
+ munmap ((caddr_t) map[i], length[i]);
+
+ if (ret >= 0)
+ return ret;
+
+ ret = 0;
+ }
+#endif
+
+ for (i = 0; i < 2; i++)
+ {
+ temp[i] = fopen (cmpfile[i], "r");
+ if (!temp[i])
+ {
+ error ("%s: could not open compare-debug file %s",
+ gcc_input_filename, cmpfile[i]);
+ ret = 1;
+ break;
+ }
+ }
+
+ if (!ret && temp[0] && temp[1])
+ for (;;)
+ {
+ int c0, c1;
+ c0 = fgetc (temp[0]);
+ c1 = fgetc (temp[1]);
+
+ if (c0 != c1)
+ {
+ error ("%s: -fcompare-debug failure",
+ gcc_input_filename);
+ ret = 1;
+ break;
+ }
+
+ if (c0 == EOF)
+ break;
+ }
+
+ for (i = 1; i >= 0; i--)
+ {
+ if (temp[i])
+ fclose (temp[i]);
+ }
+
+ return ret;
+}
+
extern int main (int, char **);
int
int num_linker_inputs = 0;
char *explicit_link_files;
char *specs_file;
+ char *lto_wrapper_file;
const char *p;
struct user_specs *uptr;
char **old_argv = argv;
+ struct cl_decoded_option *decoded_options;
+ unsigned int decoded_options_count;
/* Initialize here, not in definition. The IRIX 6 O32 cc sometimes chokes
on ?: in file-scope variable initializations. */
p = argv[0] + strlen (argv[0]);
while (p != argv[0] && !IS_DIR_SEPARATOR (p[-1]))
--p;
- programname = p;
+ progname = p;
- xmalloc_set_program_name (programname);
+ xmalloc_set_program_name (progname);
expandargv (&argc, &argv);
if (argv != old_argv)
at_file_supplied = true;
- prune_options (&argc, &argv);
+ global_options = global_options_init;
+
+ decode_cmdline_options_to_array (argc, CONST_CAST2 (const char **, char **,
+ argv),
+ CL_DRIVER,
+ &decoded_options, &decoded_options_count);
#ifdef GCC_DRIVER_HOST_INITIALIZATION
/* Perform host dependent initialization when needed. */
gcc_init_libintl ();
+ diagnostic_initialize (global_dc, 0);
+ if (atexit (delete_temp_files) != 0)
+ fatal_error ("atexit failed");
+
if (signal (SIGINT, SIG_IGN) != SIG_IGN)
- signal (SIGINT, fatal_error);
+ signal (SIGINT, fatal_signal);
#ifdef SIGHUP
if (signal (SIGHUP, SIG_IGN) != SIG_IGN)
- signal (SIGHUP, fatal_error);
+ signal (SIGHUP, fatal_signal);
#endif
if (signal (SIGTERM, SIG_IGN) != SIG_IGN)
- signal (SIGTERM, fatal_error);
+ signal (SIGTERM, fatal_signal);
#ifdef SIGPIPE
if (signal (SIGPIPE, SIG_IGN) != SIG_IGN)
- signal (SIGPIPE, fatal_error);
+ signal (SIGPIPE, fatal_signal);
#endif
#ifdef SIGCHLD
/* We *MUST* set SIGCHLD to SIG_DFL so that the wait4() call will
multilib_defaults = XOBFINISH (&multilib_obstack, const char *);
}
- /* Set up to remember the pathname of gcc and any options
- needed for collect. We use argv[0] instead of programname because
- we need the complete pathname. */
- obstack_init (&collect_obstack);
- obstack_grow (&collect_obstack, "COLLECT_GCC=", sizeof ("COLLECT_GCC=") - 1);
- obstack_grow (&collect_obstack, argv[0], strlen (argv[0]) + 1);
- xputenv (XOBFINISH (&collect_obstack, char *));
-
#ifdef INIT_ENVIRONMENT
/* Set up any other necessary machine specific environment variables. */
xputenv (INIT_ENVIRONMENT);
Make a table of specified input files (infiles, n_infiles).
Decode switches that are handled locally. */
- process_command (argc, (const char **) argv);
+ process_command (decoded_options_count, decoded_options);
/* Initialize the vector of specs to just the default.
This means one element containing 0s, as a terminator. */
for (i = 0; i < ARRAY_SIZE (driver_self_specs); i++)
do_self_spec (driver_self_specs[i]);
+ if (compare_debug)
+ {
+ enum save_temps save;
+
+ if (!compare_debug_second)
+ {
+ n_switches_debug_check[1] = n_switches;
+ n_switches_alloc_debug_check[1] = n_switches_alloc;
+ switches_debug_check[1] = XDUPVEC (struct switchstr, switches,
+ n_switches_alloc);
+
+ do_self_spec ("%:compare-debug-self-opt()");
+ n_switches_debug_check[0] = n_switches;
+ n_switches_alloc_debug_check[0] = n_switches_alloc;
+ switches_debug_check[0] = switches;
+
+ n_switches = n_switches_debug_check[1];
+ n_switches_alloc = n_switches_alloc_debug_check[1];
+ switches = switches_debug_check[1];
+ }
+
+ /* Avoid crash when computing %j in this early. */
+ save = save_temps_flag;
+ save_temps_flag = SAVE_TEMPS_NONE;
+
+ compare_debug = -compare_debug;
+ do_self_spec ("%:compare-debug-self-opt()");
+
+ save_temps_flag = save;
+
+ if (!compare_debug_second)
+ {
+ n_switches_debug_check[1] = n_switches;
+ n_switches_alloc_debug_check[1] = n_switches_alloc;
+ switches_debug_check[1] = switches;
+ compare_debug = -compare_debug;
+ n_switches = n_switches_debug_check[0];
+ n_switches_alloc = n_switches_debug_check[0];
+ switches = switches_debug_check[0];
+ }
+ }
+
/* If not cross-compiling, look for executables in the standard
places. */
if (*cross_compile == '0')
if (*sysroot_suffix_spec != 0
&& do_spec_2 (sysroot_suffix_spec) == 0)
{
- if (argbuf_index > 1)
+ if (VEC_length (const_char_p, argbuf) > 1)
error ("spec failure: more than one arg to SYSROOT_SUFFIX_SPEC");
- else if (argbuf_index == 1)
- target_sysroot_suffix = xstrdup (argbuf[argbuf_index -1]);
+ else if (VEC_length (const_char_p, argbuf) == 1)
+ target_sysroot_suffix = xstrdup (VEC_last (const_char_p, argbuf));
}
#ifdef HAVE_LD_SYSROOT
if (*sysroot_hdrs_suffix_spec != 0
&& do_spec_2 (sysroot_hdrs_suffix_spec) == 0)
{
- if (argbuf_index > 1)
+ if (VEC_length (const_char_p, argbuf) > 1)
error ("spec failure: more than one arg to SYSROOT_HEADERS_SUFFIX_SPEC");
- else if (argbuf_index == 1)
- target_sysroot_hdrs_suffix = xstrdup (argbuf[argbuf_index -1]);
+ else if (VEC_length (const_char_p, argbuf) == 1)
+ target_sysroot_hdrs_suffix = xstrdup (VEC_last (const_char_p, argbuf));
}
/* Look for startfiles in the standard places. */
&& do_spec_2 (startfile_prefix_spec) == 0
&& do_spec_1 (" ", 0, NULL) == 0)
{
+ const char *arg;
int ndx;
- for (ndx = 0; ndx < argbuf_index; ndx++)
- add_sysrooted_prefix (&startfile_prefixes, argbuf[ndx], "BINUTILS",
+ FOR_EACH_VEC_ELT (const_char_p, argbuf, ndx, arg)
+ add_sysrooted_prefix (&startfile_prefixes, arg, "BINUTILS",
PREFIX_PRIORITY_LAST, 0, 1);
}
/* We should eventually get rid of all these and stick to
else if (*cross_compile == '0')
{
add_prefix (&startfile_prefixes,
- concat (gcc_exec_prefix
- ? gcc_exec_prefix : standard_exec_prefix,
- machine_suffix,
+ concat (gcc_exec_prefix
+ ? gcc_exec_prefix : standard_exec_prefix,
+ machine_suffix,
standard_startfile_prefix, NULL),
NULL, PREFIX_PRIORITY_LAST, 0, 1);
}
the subdirectory based on the options. */
set_multilib_dir ();
+ /* Set up to remember the pathname of gcc and any options
+ needed for collect. We use argv[0] instead of progname because
+ we need the complete pathname. */
+ obstack_init (&collect_obstack);
+ obstack_grow (&collect_obstack, "COLLECT_GCC=", sizeof ("COLLECT_GCC=") - 1);
+ obstack_grow (&collect_obstack, argv[0], strlen (argv[0]) + 1);
+ xputenv (XOBFINISH (&collect_obstack, char *));
+
+ /* Set up to remember the pathname of the lto wrapper. */
+
+ lto_wrapper_file = find_a_file (&exec_prefixes, "lto-wrapper", X_OK, false);
+ if (lto_wrapper_file)
+ {
+ lto_wrapper_spec = lto_wrapper_file;
+ obstack_init (&collect_obstack);
+ obstack_grow (&collect_obstack, "COLLECT_LTO_WRAPPER=",
+ sizeof ("COLLECT_LTO_WRAPPER=") - 1);
+ obstack_grow (&collect_obstack, lto_wrapper_spec,
+ strlen (lto_wrapper_spec) + 1);
+ xputenv (XOBFINISH (&collect_obstack, char *));
+ }
+
/* Warn about any switches that no pass was interested in. */
for (i = 0; (int) i < n_switches; i++)
if (! switches[i].validated)
- error ("unrecognized option '-%s'", switches[i].part1);
+ error ("unrecognized option %<-%s%>", switches[i].part1);
/* Obey some of the options. */
else
/* The error status indicates that only one set of fixed
headers should be built. */
- fatal ("not configured with sysroot headers suffix");
+ fatal_error ("not configured with sysroot headers suffix");
}
if (print_help_list)
fflush (stdout);
}
+ if (print_version)
+ {
+ printf (_("%s %s%s\n"), progname, pkgversion_string,
+ version_string);
+ printf ("Copyright %s 2010 Free Software Foundation, Inc.\n",
+ _("(C)"));
+ fputs (_("This is free software; see the source for copying conditions. There is NO\n\
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n\n"),
+ stdout);
+ if (! verbose_flag)
+ return 0;
+
+ /* We do not exit here. We use the same mechanism of --help to print
+ the version of the sub-processes. */
+ fputc ('\n', stdout);
+ fflush (stdout);
+ }
+
if (verbose_flag)
{
int n;
const char *thrmod;
- notice ("Target: %s\n", spec_machine);
- notice ("Configured with: %s\n", configuration_arguments);
+ fnotice (stderr, "Target: %s\n", spec_machine);
+ fnotice (stderr, "Configured with: %s\n", configuration_arguments);
#ifdef THREAD_MODEL_SPEC
/* We could have defined THREAD_MODEL_SPEC to "%*" by default,
thrmod = thread_model;
#endif
- notice ("Thread model: %s\n", thrmod);
+ fnotice (stderr, "Thread model: %s\n", thrmod);
/* compiler_version is truncated at the first space when initialized
from version string, so truncate version_string at the first space
if (! strncmp (version_string, compiler_version, n)
&& compiler_version[n] == 0)
- notice ("gcc version %s %s\n", version_string, pkgversion_string);
+ fnotice (stderr, "gcc version %s %s\n", version_string,
+ pkgversion_string);
else
- notice ("gcc driver version %s %sexecuting gcc version %s\n",
- version_string, pkgversion_string, compiler_version);
+ fnotice (stderr, "gcc driver version %s %sexecuting gcc version %s\n",
+ version_string, pkgversion_string, compiler_version);
if (n_infiles == 0)
return (0);
}
if (n_infiles == added_libraries)
- fatal ("no input files");
+ fatal_error ("no input files");
/* Make a place to record the compiler output file names
that correspond to the input files. */
explicit_link_files = XCNEWVEC (char, n_infiles);
- if (combine_flag)
- combine_inputs = true;
- else
- combine_inputs = false;
+ combine_inputs = have_o || flag_wpa;
for (i = 0; (int) i < n_infiles; i++)
{
}
if (!combine_inputs && have_c && have_o && lang_n_infiles > 1)
- fatal ("cannot specify -o with -c or -S with multiple files");
-
- if (combine_flag && save_temps_flag)
- {
- bool save_combine_inputs = combine_inputs;
- /* Must do a separate pre-processing pass for C & Objective-C files, to
- obtain individual .i files. */
-
- combine_inputs = false;
- for (i = 0; (int) i < n_infiles; i++)
- {
- int this_file_error = 0;
-
- input_file_number = i;
- set_input (infiles[i].name);
- if (infiles[i].incompiler
- && (infiles[i].incompiler)->needs_preprocessing)
- input_file_compiler = infiles[i].incompiler;
- else
- continue;
-
- if (input_file_compiler)
- {
- if (input_file_compiler->spec[0] == '#')
- {
- error ("%s: %s compiler not installed on this system",
- input_filename, &input_file_compiler->spec[1]);
- this_file_error = 1;
- }
- else
- {
- value = do_spec (input_file_compiler->spec);
- infiles[i].preprocessed = true;
- if (!have_o_argbuf_index)
- fatal ("spec '%s' is invalid", input_file_compiler->spec);
- infiles[i].name = argbuf[have_o_argbuf_index];
- infiles[i].incompiler
- = lookup_compiler (infiles[i].name,
- strlen (infiles[i].name),
- infiles[i].language);
-
- if (value < 0)
- this_file_error = 1;
- }
- }
-
- if (this_file_error)
- {
- delete_failure_queue ();
- error_count++;
- break;
- }
- clear_failure_queue ();
- }
- combine_inputs = save_combine_inputs;
- }
+ fatal_error ("cannot specify -o with -c, -S or -E with multiple files");
for (i = 0; (int) i < n_infiles; i++)
{
/* Use the same thing in %o, unless cp->spec says otherwise. */
- outfiles[i] = input_filename;
+ outfiles[i] = gcc_input_filename;
/* Figure out which compiler from the file's suffix. */
- if (! combine_inputs)
- input_file_compiler
- = lookup_compiler (infiles[i].name, input_filename_length,
- infiles[i].language);
- else
- input_file_compiler = infiles[i].incompiler;
+ input_file_compiler
+ = lookup_compiler (infiles[i].name, input_filename_length,
+ infiles[i].language);
if (input_file_compiler)
{
if (input_file_compiler->spec[0] == '#')
{
error ("%s: %s compiler not installed on this system",
- input_filename, &input_file_compiler->spec[1]);
+ gcc_input_filename, &input_file_compiler->spec[1]);
this_file_error = 1;
}
else
{
+ if (compare_debug)
+ {
+ if (debug_check_temp_file[0])
+ free (debug_check_temp_file[0]);
+ debug_check_temp_file[0] = NULL;
+
+ if (debug_check_temp_file[1])
+ free (debug_check_temp_file[1]);
+ debug_check_temp_file[1] = NULL;
+ }
+
value = do_spec (input_file_compiler->spec);
infiles[i].compiled = true;
if (value < 0)
this_file_error = 1;
+ else if (compare_debug && debug_check_temp_file[0])
+ {
+ if (verbose_flag)
+ inform (0, "recompiling with -fcompare-debug");
+
+ compare_debug = -compare_debug;
+ n_switches = n_switches_debug_check[1];
+ n_switches_alloc = n_switches_alloc_debug_check[1];
+ switches = switches_debug_check[1];
+
+ value = do_spec (input_file_compiler->spec);
+
+ compare_debug = -compare_debug;
+ n_switches = n_switches_debug_check[0];
+ n_switches_alloc = n_switches_alloc_debug_check[0];
+ switches = switches_debug_check[0];
+
+ if (value < 0)
+ {
+ error ("during -fcompare-debug recompilation");
+ this_file_error = 1;
+ }
+
+ gcc_assert (debug_check_temp_file[1]
+ && strcmp (debug_check_temp_file[0],
+ debug_check_temp_file[1]));
+
+ if (verbose_flag)
+ inform (0, "comparing final insns dumps");
+
+ if (compare_files (debug_check_temp_file))
+ this_file_error = 1;
+ }
+
+ if (compare_debug)
+ {
+ if (debug_check_temp_file[0])
+ free (debug_check_temp_file[0]);
+ debug_check_temp_file[0] = NULL;
+
+ if (debug_check_temp_file[1])
+ free (debug_check_temp_file[1]);
+ debug_check_temp_file[1] = NULL;
+ }
}
}
if (this_file_error)
{
delete_failure_queue ();
- error_count++;
+ errorcount++;
}
/* If this compilation succeeded, don't delete those files later. */
clear_failure_queue ();
}
}
- if (error_count == 0)
+ if (!seen_error ())
{
/* Make sure INPUT_FILE_NUMBER points to first available open
slot. */
input_file_number = n_infiles;
if (lang_specific_pre_link ())
- error_count++;
+ errorcount++;
}
/* Determine if there are any linker input files. */
/* Run ld to link all the compiler output files. */
- if (num_linker_inputs > 0 && error_count == 0 && print_subprocess_help < 2)
+ if (num_linker_inputs > 0 && !seen_error () && print_subprocess_help < 2)
{
int tmp = execution_count;
+ const char *fuse_linker_plugin = "fuse-linker-plugin";
/* We'll use ld if we can't find collect2. */
if (! strcmp (linker_name_spec, "collect2"))
if (s == NULL)
linker_name_spec = "ld";
}
+
+ if (switch_matches (fuse_linker_plugin,
+ fuse_linker_plugin + strlen (fuse_linker_plugin), 0))
+ {
+ linker_plugin_file_spec = find_a_file (&exec_prefixes,
+ LTOPLUGINSONAME, R_OK,
+ false);
+ if (!linker_plugin_file_spec)
+ fatal_error ("-fuse-linker-plugin, but " LTOPLUGINSONAME " not found");
+ }
+ lto_gcc_spec = argv[0];
+
/* Rebuild the COMPILER_PATH and LIBRARY_PATH environment variables
for collect. */
putenv_from_prefixes (&exec_prefixes, "COMPILER_PATH", false);
}
value = do_spec (link_command_spec);
if (value < 0)
- error_count = 1;
+ errorcount = 1;
linker_was_run = (tmp != execution_count);
}
/* If options said don't run linker,
complain about input files to be given to the linker. */
- if (! linker_was_run && error_count == 0)
+ if (! linker_was_run && !seen_error ())
for (i = 0; (int) i < n_infiles; i++)
if (explicit_link_files[i]
&& !(infiles[i].language && infiles[i].language[0] == '*'))
- error ("%s: linker input file unused because linking not done",
- outfiles[i]);
+ warning (0, "%s: linker input file unused because linking not done",
+ outfiles[i]);
/* Delete some or all of the temporary files we made. */
- if (error_count)
+ if (seen_error ())
delete_failure_queue ();
delete_temp_files ();
}
return (signal_count != 0 ? 2
- : error_count > 0 ? (pass_exit_codes ? greatest_status : 1)
+ : seen_error () ? (pass_exit_codes ? greatest_status : 1)
: 0);
}
static void
perror_with_name (const char *name)
{
- error ("%s: %s", name, xstrerror (errno));
-}
-
-/* Output an error message and exit. */
-
-void
-fancy_abort (const char *file, int line, const char *func)
-{
- fatal_ice ("internal gcc abort in %s, at %s:%d", func, file, line);
-}
-\f
-/* Output an error message and exit. */
-
-void
-fatal_ice (const char *cmsgid, ...)
-{
- va_list ap;
-
- va_start (ap, cmsgid);
-
- fprintf (stderr, "%s: ", programname);
- vfprintf (stderr, _(cmsgid), ap);
- va_end (ap);
- fprintf (stderr, "\n");
- delete_temp_files ();
- exit (pass_exit_codes ? ICE_EXIT_CODE : 1);
-}
-
-void
-fatal (const char *cmsgid, ...)
-{
- va_list ap;
-
- va_start (ap, cmsgid);
-
- fprintf (stderr, "%s: ", programname);
- vfprintf (stderr, _(cmsgid), ap);
- va_end (ap);
- fprintf (stderr, "\n");
- delete_temp_files ();
- exit (1);
-}
-
-/* The argument is actually c-format, not gcc-internal-format,
- but because functions with identical names are used through
- the rest of the compiler with gcc-internal-format, we just
- need to hope all users of these functions use the common
- subset between c-format and gcc-internal-format. */
-
-void
-error (const char *gmsgid, ...)
-{
- va_list ap;
-
- va_start (ap, gmsgid);
- fprintf (stderr, "%s: ", programname);
- vfprintf (stderr, _(gmsgid), ap);
- va_end (ap);
-
- fprintf (stderr, "\n");
-}
-
-static void
-notice (const char *cmsgid, ...)
-{
- va_list ap;
-
- va_start (ap, cmsgid);
- vfprintf (stderr, _(cmsgid), ap);
- va_end (ap);
+ error ("%s: %m", name);
}
\f
static inline void
if (*q == '\0')
{
invalid_matches:
- fatal ("multilib spec '%s' is invalid", multilib_matches);
+ fatal_error ("multilib spec %qs is invalid",
+ multilib_matches);
}
q++;
}
if (*p == '\0')
{
invalid_exclusions:
- fatal ("multilib exclusions '%s' is invalid",
- multilib_exclusions);
+ fatal_error ("multilib exclusions %qs is invalid",
+ multilib_exclusions);
}
if (! ok)
if (*p == '\0')
{
invalid_select:
- fatal ("multilib select '%s' is invalid",
- multilib_select);
+ fatal_error ("multilib select %qs is invalid",
+ multilib_select);
}
++p;
}
if (*p == '\0')
{
invalid_select:
- fatal ("multilib select '%s' is invalid", multilib_select);
+ fatal_error ("multilib select %qs is invalid", multilib_select);
}
++p;
if (*e == '\0')
{
invalid_exclusion:
- fatal ("multilib exclusion '%s' is invalid",
- multilib_exclusions);
+ fatal_error ("multilib exclusion %qs is invalid",
+ multilib_exclusions);
}
if (! m)
value = getenv (argv[0]);
if (!value)
- fatal ("environment variable \"%s\" not defined", argv[0]);
+ fatal_error ("environment variable %qs not defined", argv[0]);
/* We have to escape every character of the environment variable so
they are not interpreted as active spec characters. A
ptr[0] = '\\';
ptr[1] = *value++;
}
-
+
strcpy (ptr, argv[1]);
-
+
return result;
}
return NULL;
}
+/* remove-outfile built-in spec function.
+ *
+ * This looks for the first argument in the outfiles array's name and
+ * removes it. */
+
+static const char *
+remove_outfile_spec_function (int argc, const char **argv)
+{
+ int i;
+ /* Must have exactly one argument. */
+ if (argc != 1)
+ abort ();
+
+ for (i = 0; i < n_infiles; i++)
+ {
+ if (outfiles[i] && !strcmp (outfiles[i], argv[0]))
+ outfiles[i] = NULL;
+ }
+ return NULL;
+}
+
/* Given two version numbers, compares the two numbers.
A version number must match the regular expression
([1-9][0-9]*|0)(\.([1-9][0-9]*|0))*
abort ();
rresult = regexec (&r, v1, 0, NULL, 0);
if (rresult == REG_NOMATCH)
- fatal ("invalid version number `%s'", v1);
+ fatal_error ("invalid version number %qs", v1);
else if (rresult != 0)
abort ();
rresult = regexec (&r, v2, 0, NULL, 0);
if (rresult == REG_NOMATCH)
- fatal ("invalid version number `%s'", v2);
+ fatal_error ("invalid version number %qs", v2);
else if (rresult != 0)
abort ();
bool result;
if (argc < 3)
- fatal ("too few arguments to %%:version-compare");
+ fatal_error ("too few arguments to %%:version-compare");
if (argv[0][0] == '\0')
abort ();
if ((argv[0][1] == '<' || argv[0][1] == '>') && argv[0][0] != '!')
nargs = 2;
if (argc != nargs + 3)
- fatal ("too many arguments to %%:version-compare");
+ fatal_error ("too many arguments to %%:version-compare");
switch_len = strlen (argv[nargs + 1]);
for (i = 0; i < n_switches; i++)
break;
default:
- fatal ("unknown operator '%s' in %%:version-compare", argv[0]);
+ fatal_error ("unknown operator %qs in %%:version-compare", argv[0]);
}
if (! result)
return NULL;
return NULL;
}
+/* %:find-file spec function. This function replaces its argument by
+ the file found thru find_file, that is the -print-file-name gcc
+ program option. */
+static const char *
+find_file_spec_function (int argc, const char **argv)
+{
+ const char *file;
+
+ if (argc != 1)
+ abort ();
+
+ file = find_file (argv[0]);
+ return file;
+}
+
+
+/* %:find-plugindir spec function. This function replaces its argument
+ by the -iplugindir=<dir> option. `dir' is found thru find_file, that
+ is the -print-file-name gcc program option. */
+static const char *
+find_plugindir_spec_function (int argc, const char **argv ATTRIBUTE_UNUSED)
+{
+ const char *option;
+
+ if (argc != 0)
+ abort ();
+
+ option = concat ("-iplugindir=", find_file ("plugin"), NULL);
+ return option;
+}
+
+
/* %:print-asm-header spec function. Print a banner to say that the
following output is from the assembler. */
fflush (stdout);
return NULL;
}
+
+/* Compute a timestamp to initialize flag_random_seed. */
+
+static unsigned
+get_local_tick (void)
+{
+ unsigned ret = 0;
+
+ /* Get some more or less random data. */
+#ifdef HAVE_GETTIMEOFDAY
+ {
+ struct timeval tv;
+
+ gettimeofday (&tv, NULL);
+ ret = tv.tv_sec * 1000 + tv.tv_usec / 1000;
+ }
+#else
+ {
+ time_t now = time (NULL);
+
+ if (now != (time_t)-1)
+ ret = (unsigned) now;
+ }
+#endif
+
+ return ret;
+}
+
+/* %:compare-debug-dump-opt spec function. Save the last argument,
+ expected to be the last -fdump-final-insns option, or generate a
+ temporary. */
+
+static const char *
+compare_debug_dump_opt_spec_function (int arg,
+ const char **argv ATTRIBUTE_UNUSED)
+{
+ const char *ret;
+ char *name;
+ int which;
+ static char random_seed[HOST_BITS_PER_WIDE_INT / 4 + 3];
+
+ if (arg != 0)
+ fatal_error ("too many arguments to %%:compare-debug-dump-opt");
+
+ do_spec_2 ("%{fdump-final-insns=*:%*}");
+ do_spec_1 (" ", 0, NULL);
+
+ if (VEC_length (const_char_p, argbuf) > 0
+ && strcmp (argv[VEC_length (const_char_p, argbuf) - 1], "."))
+ {
+ if (!compare_debug)
+ return NULL;
+
+ name = xstrdup (argv[VEC_length (const_char_p, argbuf) - 1]);
+ ret = NULL;
+ }
+ else
+ {
+ const char *ext = NULL;
+
+ if (VEC_length (const_char_p, argbuf) > 0)
+ {
+ do_spec_2 ("%{o*:%*}%{!o:%{!S:%b%O}%{S:%b.s}}");
+ ext = ".gkd";
+ }
+ else if (!compare_debug)
+ return NULL;
+ else
+ do_spec_2 ("%g.gkd");
+
+ do_spec_1 (" ", 0, NULL);
+
+ gcc_assert (VEC_length (const_char_p, argbuf) > 0);
+
+ name = concat (VEC_last (const_char_p, argbuf), ext, NULL);
+
+ ret = concat ("-fdump-final-insns=", name, NULL);
+ }
+
+ which = compare_debug < 0;
+ debug_check_temp_file[which] = name;
+
+ if (!which)
+ {
+ unsigned HOST_WIDE_INT value = get_local_tick () ^ getpid ();
+
+ sprintf (random_seed, HOST_WIDE_INT_PRINT_HEX, value);
+ }
+
+ if (*random_seed)
+ ret = concat ("%{!frandom-seed=*:-frandom-seed=", random_seed, "} ",
+ ret, NULL);
+
+ if (which)
+ *random_seed = 0;
+
+ return ret;
+}
+
+static const char *debug_auxbase_opt;
+
+/* %:compare-debug-self-opt spec function. Expands to the options
+ that are to be passed in the second compilation of
+ compare-debug. */
+
+static const char *
+compare_debug_self_opt_spec_function (int arg,
+ const char **argv ATTRIBUTE_UNUSED)
+{
+ if (arg != 0)
+ fatal_error ("too many arguments to %%:compare-debug-self-opt");
+
+ if (compare_debug >= 0)
+ return NULL;
+
+ do_spec_2 ("%{c|S:%{o*:%*}}");
+ do_spec_1 (" ", 0, NULL);
+
+ if (VEC_length (const_char_p, argbuf) > 0)
+ debug_auxbase_opt = concat ("-auxbase-strip ",
+ VEC_last (const_char_p, argbuf),
+ NULL);
+ else
+ debug_auxbase_opt = NULL;
+
+ return concat ("\
+%<o %<MD %<MMD %<MF* %<MG %<MP %<MQ* %<MT* \
+%<fdump-final-insns=* -w -S -o %j \
+%{!fcompare-debug-second:-fcompare-debug-second} \
+", compare_debug_opt, NULL);
+}
+
+/* %:compare-debug-auxbase-opt spec function. Expands to the auxbase
+ options that are to be passed in the second compilation of
+ compare-debug. It expects, as an argument, the basename of the
+ current input file name, with the .gk suffix appended to it. */
+
+static const char *
+compare_debug_auxbase_opt_spec_function (int arg,
+ const char **argv)
+{
+ char *name;
+ int len;
+
+ if (arg == 0)
+ fatal_error ("too few arguments to %%:compare-debug-auxbase-opt");
+
+ if (arg != 1)
+ fatal_error ("too many arguments to %%:compare-debug-auxbase-opt");
+
+ if (compare_debug >= 0)
+ return NULL;
+
+ len = strlen (argv[0]);
+ if (len < 3 || strcmp (argv[0] + len - 3, ".gk") != 0)
+ fatal_error ("argument to %%:compare-debug-auxbase-opt "
+ "does not end in .gk");
+
+ if (debug_auxbase_opt)
+ return debug_auxbase_opt;
+
+#define OPT "-auxbase "
+
+ len -= 3;
+ name = (char*) xmalloc (sizeof (OPT) + len);
+ memcpy (name, OPT, sizeof (OPT) - 1);
+ memcpy (name + sizeof (OPT) - 1, argv[0], len);
+ name[sizeof (OPT) - 1 + len] = '\0';
+
+#undef OPT
+
+ return name;
+}
+
+/* %:pass-through-libs spec function. Finds all -l options and input
+ file names in the lib spec passed to it, and makes a list of them
+ prepended with the plugin option to cause them to be passed through
+ to the final link after all the new object files have been added. */
+
+const char *
+pass_through_libs_spec_func (int argc, const char **argv)
+{
+ char *prepended = xstrdup (" ");
+ int n;
+ /* Shlemiel the painter's algorithm. Innately horrible, but at least
+ we know that there will never be more than a handful of strings to
+ concat, and it's only once per run, so it's not worth optimising. */
+ for (n = 0; n < argc; n++)
+ {
+ char *old = prepended;
+ /* Anything that isn't an option is a full path to an output
+ file; pass it through if it ends in '.a'. Among options,
+ pass only -l. */
+ if (argv[n][0] == '-' && argv[n][1] == 'l')
+ {
+ const char *lopt = argv[n] + 2;
+ /* Handle both joined and non-joined -l options. If for any
+ reason there's a trailing -l with no joined or following
+ arg just discard it. */
+ if (!*lopt && ++n >= argc)
+ break;
+ else if (!*lopt)
+ lopt = argv[n];
+ prepended = concat (prepended, "-plugin-opt=-pass-through=-l",
+ lopt, " ", NULL);
+ }
+ else if (!strcmp (".a", argv[n] + strlen (argv[n]) - 2))
+ {
+ prepended = concat (prepended, "-plugin-opt=-pass-through=",
+ argv[n], " ", NULL);
+ }
+ if (prepended != old)
+ free (old);
+ }
+ return prepended;
+}
OSDN Git Service
