/* Compiler driver program that can handle many languages.
- Copyright (C) 1987, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000 Free Software Foundation, Inc.
+ Copyright (C) 1987, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+ 1999, 2000, 2001 Free Software Foundation, Inc.
This file is part of GNU CC.
Once it knows which kind of compilation to perform, the procedure for
compilation is specified by a string called a "spec". */
+/* A Short Introduction to Adding a Command-Line Option.
+
+ Before adding a command-line option, consider if it is really
+ necessary. Each additional command-line option adds complexity and
+ is difficult to remove in subsequent versions.
+
+ In the following, consider adding the command-line argument
+ `--bar'.
+
+ 1. Each command-line option is specified in the specs file. The
+ notation is described below in the comment entitled "The Specs
+ Language". Read it.
+
+ 2. In this file, add an entry to "option_map" equating the long
+ `--' argument version and any shorter, single letter version. Read
+ the comments in the declaration of "struct option_map" for an
+ explanation. Do not omit the first `-'.
+
+ 3. Look in the "specs" file to determine which program or option
+ list should be given the argument, e.g., "cc1_options". Add the
+ appropriate syntax for the shorter option version to the
+ corresponding "const char *" entry in this file. Omit the first
+ `-' from the option. For example, use `-bar', rather than `--bar'.
+
+ 4. If the argument takes an argument, e.g., `--baz argument1',
+ modify either DEFAULT_SWITCH_TAKES_ARG or
+ DEFAULT_WORD_SWITCH_TAKES_ARG in this file. Omit the first `-'
+ from `--baz'.
+
+ 5. Document the option in this file's display_help(). If the
+ option is passed to a subprogram, modify its corresponding
+ function, e.g., cppinit.c:print_help() or toplev.c:display_help(),
+ instead.
+
+ 6. Compile and test. Make sure that your new specs file is being
+ read. For example, use a debugger to investigate the value of
+ "specs_file" in main(). */
#include "config.h"
#include "system.h"
#include <signal.h>
+#if ! defined( SIGCHLD ) && defined( SIGCLD )
+# define SIGCHLD SIGCLD
+#endif
#include "obstack.h"
#include "intl.h"
#include "prefix.h"
#endif /* DIR_UP */
#endif /* VMS */
-static char dir_separator_str[] = {DIR_SEPARATOR, 0};
+static char dir_separator_str[] = { DIR_SEPARATOR, 0 };
#define obstack_chunk_alloc xmalloc
#define obstack_chunk_free free
to the calling program. */
static int pass_exit_codes;
+/* Definition of string containing the arguments given to configure. */
+#include "configargs.h"
+
/* Flag saying to print the directories gcc will search through looking for
programs, libraries, etc. */
static int verbose_flag;
+/* Flag indicating to print target specific command line options. */
+
+static int target_help_flag;
+
/* Flag indicating whether we should report subprocess execution times
(if this is supported by the system - see pexecute.c). */
static const char *cross_compile = "0";
#endif
+#ifdef MODIFY_TARGET_NAME
+
+/* Information on how to alter the target name based on a command-line
+ switch. The only case we support now is simply appending or deleting a
+ string to or from the end of the first part of the configuration name. */
+
+struct modify_target
+{
+ const char *sw;
+ enum add_del {ADD, DELETE} add_del;
+ const char *str;
+}
+modify_target[] = MODIFY_TARGET_NAME;
+#endif
+
/* The number of errors that have occurred; the link phase will not be
run if this is non-zero. */
static int error_count = 0;
static char *find_a_file PARAMS ((struct path_prefix *, const char *, int));
static void add_prefix PARAMS ((struct path_prefix *, const char *,
const char *, int, int, int *));
-static void translate_options PARAMS ((int *, const char ***));
+static void translate_options PARAMS ((int *, const char *const **));
static char *skip_whitespace PARAMS ((char *));
-static void record_temp_file PARAMS ((const char *, int, int));
static void delete_if_ordinary PARAMS ((const char *));
static void delete_temp_files PARAMS ((void));
static void delete_failure_queue PARAMS ((void));
static int default_arg PARAMS ((const char *, int));
static void set_multilib_dir PARAMS ((void));
static void print_multilib_info PARAMS ((void));
-static void pfatal_with_name PARAMS ((const char *)) ATTRIBUTE_NORETURN;
static void perror_with_name PARAMS ((const char *));
static void pfatal_pexecute PARAMS ((const char *, const char *))
ATTRIBUTE_NORETURN;
-static void error PARAMS ((const char *, ...))
- ATTRIBUTE_PRINTF_1;
static void notice PARAMS ((const char *, ...))
ATTRIBUTE_PRINTF_1;
static void display_help PARAMS ((void));
static void add_preprocessor_option PARAMS ((const char *, int));
static void add_assembler_option PARAMS ((const char *, int));
static void add_linker_option PARAMS ((const char *, int));
-static void process_command PARAMS ((int, const char **));
+static void process_command PARAMS ((int, const char *const *));
static int execute PARAMS ((void));
-static void unused_prefix_warnings PARAMS ((struct path_prefix *));
static void clear_args PARAMS ((void));
static void fatal_error PARAMS ((int));
static void set_input PARAMS ((const char *));
+static void init_gcc_specs PARAMS ((struct obstack *,
+ const char *,
+ const char *));
\f
-/* Specs are strings containing lines, each of which (if not blank)
+/* The Specs Language
+
+Specs are strings containing lines, each of which (if not blank)
is made up of a program name, and arguments separated by spaces.
The program name must be exact and start from root, since no path
is searched and it is unreliable to depend on the current working directory.
%b substitute the basename of the input file being processed.
This is the substring up to (and not including) the last period
and not including the directory.
+ %B same as %b, but include the file suffix (text after the last period).
%gSUFFIX
substitute a file name that has suffix SUFFIX and is chosen
once per compilation, and mark the argument a la %d. To reduce
for each `%g.s' and another for each `%U.s'. Previously, %U was
simply substituted with a file name chosen for the previous %u,
without regard to any appended suffix.
+ %jSUFFIX
+ substitutes the name of the HOST_BIT_BUCKET, if any, and if it is
+ writable, and if save-temps is off; otherwise, substitute the name
+ of a temporary file, just like %u. This temporary file is not
+ meant for communication between processes, but rather as a junk
+ disposal mechanism.
+ %.SUFFIX
+ substitutes .SUFFIX for the suffixes of a matched switch's args when
+ it is subsequently output with %*. SUFFIX is terminated by the next
+ space or %.
%d marks the argument containing or following the %d as a
temporary file name, so that that file will be deleted if CC exits
successfully. Unlike %g, this contributes no text to the argument.
and substitute the full name found.
%eSTR Print STR as an error message. STR is terminated by a newline.
Use this when inconsistent options are detected.
+ %nSTR Print STR as an notice. STR is terminated by a newline.
%x{OPTION} Accumulate an option for %X.
%X Output the accumulated linker options specified by compilations.
%Y Output the accumulated assembler options specified by compilations.
%l process LINK_SPEC as a spec.
%L process LIB_SPEC as a spec.
%G process LIBGCC_SPEC as a spec.
+ %M output multilib_dir with directory separators replaced with "_";
+ if multilib_dir is not set or is ".", output "".
%S process STARTFILE_SPEC as a spec. A capital S is actually used here.
%E process ENDFILE_SPEC as a spec. A capital E is actually used here.
%c process SIGNED_CHAR_SPEC as a spec.
- %C process CPP_SPEC as a spec. A capital C is actually used here.
+ %C process CPP_SPEC as a spec.
%1 process CC1_SPEC as a spec.
%2 process CC1PLUS_SPEC as a spec.
%| output "-" if the input for the current command is coming from a pipe.
If that switch was not specified, this substitutes nothing.
Here S is a metasyntactic variable.
%{S*} substitutes all the switches specified to CC whose names start
- with -S. This is used for -o, -D, -I, etc; switches that take
+ with -S. This is used for -o, -I, etc; switches that take
arguments. CC considers `-o foo' as being one switch whose
name starts with `o'. %{o*} would substitute this text,
including the space; thus, two arguments would be generated.
%{^S*} likewise, but don't put a blank between a switch and any args.
+ %{S*&T*} likewise, but preserve order of S and T options (the order
+ of S and T in the spec is not significant). Can be any number
+ of ampersand-separated variables; for each the wild card is
+ optional. Useful for CPP as %{D*&U*&A*}.
%{S*:X} substitutes X if one or more switches whose names start with -S are
specified to CC. Note that the tail part of the -S option
(i.e. the part matched by the `*') will be substituted for each
occurrence of %* within X.
- %{<S} remove all occurences of S from the command line.
+ %{<S} remove all occurences of -S from the command line.
Note - this option is position dependent. % commands in the
- spec string before this option will see S, % commands in the
+ spec string before this option will see -S, % commands in the
spec string after this option will not.
%{S:X} substitutes X, but only if the -S switch was given to CC.
%{!S:X} substitutes X, but only if the -S switch was NOT given to CC.
#define LINKER_NAME "collect2"
#endif
+/* Here is the spec for running the linker, after compiling all files. */
+
+/* -u* was put back because both BSD and SysV seem to support it. */
+/* %{static:} simply prevents an error message if the target machine
+ doesn't handle -static. */
+/* We want %{T*} after %{L*} and %D so that it can be used to specify linker
+ scripts which exist in user specified directories, or in standard
+ directories. */
+#ifndef LINK_COMMAND_SPEC
+#define LINK_COMMAND_SPEC "\
+%{!fsyntax-only:%{!c:%{!M:%{!MM:%{!E:%{!S:\
+ %(linker) %l %X %{o*} %{A} %{d} %{e*} %{m} %{N} %{n} %{r} %{s} %{t}\
+ %{u*} %{x} %{z} %{Z} %{!A:%{!nostdlib:%{!nostartfiles:%S}}}\
+ %{static:} %{L*} %(link_libgcc) %o %{!nostdlib:%{!nodefaultlibs:%G %L %G}}\
+ %{!A:%{!nostdlib:%{!nostartfiles:%E}}} %{T*} }}}}}}"
+#endif
+
+#ifndef LINK_LIBGCC_SPEC
+# ifdef LINK_LIBGCC_SPECIAL
+/* Don't generate -L options for startfile prefix list. */
+# define LINK_LIBGCC_SPEC ""
+# else
+/* Do generate them. */
+# define LINK_LIBGCC_SPEC "%D"
+# endif
+#endif
+
static const char *cpp_spec = CPP_SPEC;
static const char *cpp_predefines = CPP_PREDEFINES;
static const char *cc1_spec = CC1_SPEC;
static const char *startfile_spec = STARTFILE_SPEC;
static const char *switches_need_spaces = SWITCHES_NEED_SPACES;
static const char *linker_name_spec = LINKER_NAME;
+static const char *link_command_spec = LINK_COMMAND_SPEC;
+static const char *link_libgcc_spec = LINK_LIBGCC_SPEC;
+
+/* Standard options to cpp, cc1, and as, to reduce duplication in specs.
+ There should be no need to override these in target dependent files,
+ but we need to copy them to the specs file so that newer versions
+ of the GCC driver can correctly drive older tool chains with the
+ appropriate -B options. */
+
+static const char *trad_capable_cpp =
+"%{traditional|ftraditional|traditional-cpp:trad}cpp0";
+
+static const char *cpp_options =
+"%{C:%{!E:%eGNU C does not support -C without using -E}}\
+ %{std*} %{nostdinc*}\
+ %{C} %{v} %{I*} %{P} %{$} %I\
+ %{MD:-M -MF %W{!o: %b.d}%W{o*:%.d%*}}\
+ %{MMD:-MM -MF %W{!o: %b.d}%W{o*:%.d%*}}\
+ %{M} %{MM} %W{MF*} %{MG} %{MP} %{MQ*} %{MT*} %{M|MD|MM|MMD:%{o*:-MQ %*}}\
+ %{!no-gcc:-D__GNUC__=%v1 -D__GNUC_MINOR__=%v2 -D__GNUC_PATCHLEVEL__=%v3}\
+ %{!undef:%{!ansi:%{!std=*:%p}%{std=gnu*:%p}} %P} %{trigraphs}\
+ %c %{Os:-D__OPTIMIZE_SIZE__} %{O*:%{!O0:-D__OPTIMIZE__}}\
+ %{ffast-math:-D__FAST_MATH__}\
+ %{fshort-wchar:-U__WCHAR_TYPE__ -D__WCHAR_TYPE__=short\\ unsigned\\ int}\
+ %{ffreestanding:-D__STDC_HOSTED__=0} %{fno-hosted:-D__STDC_HOSTED__=0}\
+ %{!ffreestanding:%{!fno-hosted:-D__STDC_HOSTED__=1}}\
+ %{fshow-column} %{fno-show-column}\
+ %{fleading-underscore} %{fno-leading-underscore}\
+ %{fno-operator-names} %{ftabstop=*} %{remap}\
+ %{g3:-dD} %{W*} %{w} %{pedantic*} %{H} %{d*} %C %{D*&U*&A*} %{i*} %Z %i\
+ %{E:%{!M*:%W{o*}}}";
+
+/* NB: This is shared amongst all front-ends. */
+static const char *cc1_options =
+"%{pg:%{fomit-frame-pointer:%e-pg and -fomit-frame-pointer are incompatible}}\
+ %1 %{!Q:-quiet} -dumpbase %B %{d*} %{m*} %{a*}\
+ %{g*} %{O*} %{W*} %{w} %{pedantic*} %{std*} %{ansi}\
+ %{traditional} %{v:-version} %{pg:-p} %{p} %{f*}\
+ %{aux-info*} %{Qn:-fno-ident} %{--help:--help}\
+ %{--target-help:--target-help}\
+ %{!fsyntax-only:%{S:%W{o*}%{!o*:-o %b.s}}}\
+ %{fsyntax-only:-o %j} %{-param*}";
+
+static const char *asm_options =
+"%a %Y %{c:%W{o*}%{!o*:-o %w%b%O}}%{!c:-o %d%w%u%O}";
+
+static const char *invoke_as =
+"%{!S:-o %{|!pipe:%g.s} |\n as %(asm_options) %{!pipe:%g.s} %A }";
/* Some compilers have limits on line lengths, and the multilib_select
and/or multilib_matches strings can be very long, so we build them at
#define MULTILIB_DEFAULTS { "" }
#endif
-static const char *const multilib_defaults_raw[] = MULTILIB_DEFAULTS;
+static const char *const multilib_defaults_raw[] = MULTILIB_DEFAULTS;
struct user_specs
{
|| !strcmp (STR, "imacros") || !strcmp (STR, "aux-info") \
|| !strcmp (STR, "idirafter") || !strcmp (STR, "iprefix") \
|| !strcmp (STR, "iwithprefix") || !strcmp (STR, "iwithprefixbefore") \
- || !strcmp (STR, "isystem") || !strcmp (STR, "specs"))
+ || !strcmp (STR, "isystem") || !strcmp (STR, "-param") \
+ || !strcmp (STR, "specs") \
+ || !strcmp (STR, "MF") || !strcmp (STR, "MT") || !strcmp (STR, "MQ"))
#ifndef WORD_SWITCH_TAKES_ARG
#define WORD_SWITCH_TAKES_ARG(STR) DEFAULT_WORD_SWITCH_TAKES_ARG (STR)
#endif
\f
-
#ifdef HAVE_EXECUTABLE_SUFFIX
/* This defines which switches stop a full compilation. */
#define DEFAULT_SWITCH_CURTAILS_COMPILATION(CHAR) \
const char *suffix; /* Use this compiler for input files
whose names end in this suffix. */
- const char *spec[4]; /* To use this compiler, concatenate these
- specs and pass to do_spec. */
+ const char *spec; /* To use this compiler, run this spec. */
+
+ const char *cpp_spec; /* If non-NULL, substitute this spec
+ for `%C', rather than the usual
+ cpp_spec. */
};
/* Pointer to a vector of `struct compiler' that gives the spec for
were not present when we built the driver, we will hit these copies
and be given a more meaningful error than "file not used since
linking is not done". */
- {".m", {"#Objective-C"}},
- {".cc", {"#C++"}}, {".cxx", {"#C++"}}, {".cpp", {"#C++"}},
- {".c++", {"#C++"}}, {".C", {"#C++"}},
- {".ads", {"#Ada"}}, {".adb", {"#Ada"}}, {".ada", {"#Ada"}},
- {".f", {"#Fortran"}}, {".for", {"#Fortran"}}, {".F", {"#Fortran"}},
- {".fpp", {"#Fortran"}},
- {".p", {"#Pascal"}}, {".pas", {"#Pascal"}},
+ {".m", "#Objective-C", 0}, {".mi", "#Objective-C", 0},
+ {".cc", "#C++", 0}, {".cxx", "#C++", 0}, {".cpp", "#C++", 0},
+ {".cp", "#C++", 0}, {".c++", "#C++", 0}, {".C", "#C++", 0},
+ {".ii", "#C++", 0},
+ {".ads", "#Ada", 0}, {".adb", "#Ada", 0}, {".ada", "#Ada", 0},
+ {".f", "#Fortran", 0}, {".for", "#Fortran", 0}, {".fpp", "#Fortran", 0},
+ {".F", "#Fortran", 0}, {".FOR", "#Fortran", 0}, {".FPP", "#Fortran", 0},
+ {".r", "#Ratfor", 0},
+ {".p", "#Pascal", 0}, {".pas", "#Pascal", 0},
+ {".ch", "#Chill", 0}, {".chi", "#Chill", 0},
+ {".java", "#Java", 0}, {".class", "#Java", 0},
+ {".zip", "#Java", 0}, {".jar", "#Java", 0},
/* Next come the entries for C. */
- {".c", {"@c"}},
+ {".c", "@c", 0},
{"@c",
- {
-#if USE_CPPLIB
- "%{E|M|MM:cpp -lang-c %{ansi:-std=c89} %{std*} %{nostdinc*}\
- %{C} %{v} %{A*} %{I*} %{P} %{$} %I\
- %{C:%{!E:%eGNU C does not support -C without using -E}}\
- %{M} %{MM} %{MD:-MD %b.d} %{MMD:-MMD %b.d} %{MG}\
- %{!no-gcc:-D__GNUC__=%v1 -D__GNUC_MINOR__=%v2 -D__GNUC_PATCHLEVEL__=%v3}\
- %{!undef:%{!ansi:%{!std=*:%p}%{std=gnu*:%p}} %P} %{trigraphs}\
- %c %{Os:-D__OPTIMIZE_SIZE__} %{O*:%{!O0:-D__OPTIMIZE__}}\
- %{ffast-math:-D__FAST_MATH__}\
- %{fshort-wchar:-D__WCHAR_TYPE__=short\\ unsigned\\ int}\
- %{traditional} %{ftraditional:-traditional}\
- %{traditional-cpp:-traditional}\
- %{fleading-underscore} %{fno-leading-underscore}\
- %{fshow-column} %{fno-show-column}\
- %{g*} %{W*} %{w} %{pedantic*} %{H} %{d*} %C %{D*} %{U*} %{i*} %Z\
- %i %{E:%W{o*}}%{M:%W{o*}}%{MM:%W{o*}}\n}\
- %{!E:%{!M:%{!MM:cc1 %i %1 \
- %{std*} %{nostdinc*} %{A*} %{I*} %I\
- %{!Q:-quiet} -dumpbase %b.c %{d*} %{m*} %{a*}\
- %{MD:-MD %b.d} %{MMD:-MMD %b.d} %{MG}\
- %{!no-gcc:-D__GNUC__=%v1 -D__GNUC_MINOR__=%v2 -D__GNUC_PATCHLEVEL__=%v3}\
- %{!undef:%{!ansi:%{!std=*:%p}%{std=gnu*:%p}} %P} %{trigraphs}\
- %c %{Os:-D__OPTIMIZE_SIZE__} %{O*:%{!O0:-D__OPTIMIZE__}}\
- %{ffast-math:-D__FAST_MATH__}\
- %{fshort-wchar:-D__WCHAR_TYPE__=short\\ unsigned\\ int}\
- %{fshort-wchar:-D__WCHAR_TYPE__=short\\ unsigned\\ int}\
- %{H} %C %{D*} %{U*} %{i*} %Z\
- %{ftraditional:-traditional}\
- %{traditional-cpp:-traditional}\
- %{traditional} %{v:-version} %{pg:-p} %{p} %{f*}\
- %{aux-info*} %{Qn:-fno-ident}\
- %{--help:--help}\
- %{g*} %{O*} %{W*} %{w} %{pedantic*}\
- %{pg:%{fomit-frame-pointer:%e-pg and -fomit-frame-pointer are incompatible}}\
- %{S:%W{o*}%{!o*:-o %b.s}}%{!S:-o %{|!pipe:%g.s}} |\n\
- %{!S:as %a %Y\
- %{c:%W{o*}%{!o*:-o %w%b%O}}%{!c:-o %d%w%u%O}\
- %{!pipe:%g.s} %A\n }}}}"
-#else /* ! USE_CPPLIB */
- "cpp -lang-c %{ansi:-std=c89} %{std*} %{nostdinc*}\
- %{C} %{v} %{A*} %{I*} %{P} %{$} %I\
- %{C:%{!E:%eGNU C does not support -C without using -E}}\
- %{M} %{MM} %{MD:-MD %b.d} %{MMD:-MMD %b.d} %{MG}\
- %{!no-gcc:-D__GNUC__=%v1 -D__GNUC_MINOR__=%v2 -D__GNUC_PATCHLEVEL__=%v3}\
- %{!undef:%{!ansi:%{!std=*:%p}%{std=gnu*:%p}} %P} %{trigraphs}\
- %c %{Os:-D__OPTIMIZE_SIZE__} %{O*:%{!O0:-D__OPTIMIZE__}}\
- %{ffast-math:-D__FAST_MATH__}\
- %{fshort-wchar:-D__WCHAR_TYPE__=short\\ unsigned\\ int}\
- %{traditional} %{ftraditional:-traditional}\
- %{traditional-cpp:-traditional}\
- %{fshow-column} %{fno-show-column}\
- %{fleading-underscore} %{fno-leading-underscore}\
- %{g*} %{W*} %{w} %{pedantic*} %{H} %{d*} %C %{D*} %{U*} %{i*} %Z\
- %i %{!M:%{!MM:%{!E:%{!pipe:%g.i}}}}%{E:%W{o*}}%{M:%W{o*}}%{MM:%W{o*}} |\n",
- "%{!M:%{!MM:%{!E:cc1 %{!pipe:%g.i} %1 \
- %{!Q:-quiet} -dumpbase %b.c %{d*} %{m*} %{a*}\
- %{g*} %{O*} %{W*} %{w} %{pedantic*} %{std*}\
- %{traditional} %{v:-version} %{pg:-p} %{p} %{f*}\
- %{aux-info*} %{Qn:-fno-ident}\
- %{--help:--help} \
- %{pg:%{fomit-frame-pointer:%e-pg and -fomit-frame-pointer are incompatible}}\
- %{S:%W{o*}%{!o*:-o %b.s}}%{!S:-o %{|!pipe:%g.s}} |\n\
- %{!S:as %a %Y\
- %{c:%W{o*}%{!o*:-o %w%b%O}}%{!c:-o %d%w%u%O}\
- %{!pipe:%g.s} %A\n }}}}"
-#endif /* ! USE_CPPLIB */
- }},
+ /* cc1 has an integrated ISO C preprocessor. We should invoke the
+ external preprocessor if -save-temps or -traditional is given. */
+ "%{E|M|MM:%(trad_capable_cpp) -lang-c %{ansi:-std=c89} %(cpp_options)}\
+ %{!E:%{!M:%{!MM:\
+ %{save-temps:%(trad_capable_cpp) -lang-c %{ansi:-std=c89}\
+ %(cpp_options) %b.i \n\
+ cc1 -fpreprocessed %b.i %(cc1_options)}\
+ %{!save-temps:\
+ %{traditional|ftraditional|traditional-cpp:\
+ tradcpp0 -lang-c %{ansi:-std=c89} %(cpp_options) %{!pipe:%g.i} |\n\
+ cc1 -fpreprocessed %{!pipe:%g.i} %(cc1_options)}\
+ %{!traditional:%{!ftraditional:%{!traditional-cpp:\
+ cc1 -lang-c %{ansi:-std=c89} %(cpp_options) %(cc1_options)}}}}\
+ %{!fsyntax-only:%(invoke_as)}}}}", 0},
{"-",
- {"%{E:cpp -lang-c %{ansi:-std=c89} %{std*} %{nostdinc*}\
- %{C} %{v} %{A*} %{I*} %{P} %{$} %I\
- %{C:%{!E:%eGNU C does not support -C without using -E}}\
- %{M} %{MM} %{MD:-MD %b.d} %{MMD:-MMD %b.d} %{MG}\
- %{!no-gcc:-D__GNUC__=%v1 -D__GNUC_MINOR__=%v2 -D__GNUC_PATCHLEVEL__=%v3}\
- %{!undef:%{!ansi:%{!std=*:%p}%{std=gnu*:%p}} %P} %{trigraphs}\
- %c %{Os:-D__OPTIMIZE_SIZE__} %{O*:%{!O0:-D__OPTIMIZE__}}\
- %{ffast-math:-D__FAST_MATH__}\
- %{fshort-wchar:-D__WCHAR_TYPE__=short\\ unsigned\\ int}\
- %{traditional} %{ftraditional:-traditional}\
- %{traditional-cpp:-traditional}\
- %{fshow-column} %{fno-show-column}\
- %{fleading-underscore} %{fno-leading-underscore}\
- %{g*} %{W*} %{w} %{pedantic*} %{H} %{d*} %C %{D*} %{U*} %{i*} %Z\
- %i %W{o*}}\
- %{!E:%e-E required when input is from standard input}"}},
- {".h", {"@c-header"}},
+ "%{!E:%e-E required when input is from standard input}\
+ %(trad_capable_cpp) -lang-c %{ansi:-std=c89} %(cpp_options)", 0},
+ {".h", "@c-header", 0},
{"@c-header",
- {"%{!E:%eCompilation of header file requested} \
- cpp %{nostdinc*} %{C} %{v} %{A*} %{I*} %{P} %{$} %I\
- %{C:%{!E:%eGNU C does not support -C without using -E}}\
- %{M} %{MM} %{MD:-MD %b.d} %{MMD:-MMD %b.d} %{MG}\
- %{!no-gcc:-D__GNUC__=%v1 -D__GNUC_MINOR__=%v2 -D__GNUC_PATCHLEVEL__=%v3}\
- %{!undef:%{!std=*:%p}%{std=gnu*:%p} %P} %{trigraphs}\
- %c %{Os:-D__OPTIMIZE_SIZE__} %{O*:%{!O0:-D__OPTIMIZE__}}\
- %{ffast-math:-D__FAST_MATH__}\
- %{fshort-wchar:-D__WCHAR_TYPE__=short\\ unsigned\\ int}\
- %{fshort-wchar:-D__WCHAR_TYPE__=short\\ unsigned\\ int}\
- %{traditional} %{ftraditional:-traditional}\
- %{traditional-cpp:-traditional}\
- %{fshow-column} %{fno-show-column}\
- %{fleading-underscore} %{fno-leading-underscore}\
- %{g*} %{W*} %{w} %{pedantic*} %{H} %{d*} %C %{D*} %{U*} %{i*} %Z\
- %i %W{o*}"}},
- {".i", {"@cpp-output"}},
+ "%{!E:%eCompilation of header file requested} \
+ %(trad_capable_cpp) -lang-c %{ansi:-std=c89} %(cpp_options)", 0},
+ {".i", "@cpp-output", 0},
{"@cpp-output",
- {"%{!M:%{!MM:%{!E:cc1 %i %1 %{!Q:-quiet} %{d*} %{m*} %{a*}\
- %{g*} %{O*} %{W*} %{w} %{pedantic*} %{std*}\
- %{traditional} %{v:-version} %{pg:-p} %{p} %{f*}\
- %{aux-info*} %{Qn:-fno-ident} -fpreprocessed\
- %{pg:%{fomit-frame-pointer:%e-pg and -fomit-frame-pointer are incompatible}}\
- %{S:%W{o*}%{!o*:-o %b.s}}%{!S:-o %{|!pipe:%g.s}} |\n\
- %{!S:as %a %Y\
- %{c:%W{o*}%{!o*:-o %w%b%O}}%{!c:-o %d%w%u%O}\
- %{!pipe:%g.s} %A\n }}}}"}},
- {".s", {"@assembler"}},
+ "%{!M:%{!MM:%{!E:cc1 -fpreprocessed %i %(cc1_options) %{!fsyntax-only:%(invoke_as)}}}}", 0},
+ {".s", "@assembler", 0},
{"@assembler",
- {"%{!M:%{!MM:%{!E:%{!S:as %a %Y\
- %{c:%W{o*}%{!o*:-o %w%b%O}}%{!c:-o %d%w%u%O}\
- %i %A\n }}}}"}},
- {".S", {"@assembler-with-cpp"}},
+ "%{!M:%{!MM:%{!E:%{!S:as %(asm_options) %i %A }}}}", 0},
+ {".S", "@assembler-with-cpp", 0},
{"@assembler-with-cpp",
- {"cpp -lang-asm %{nostdinc*} %{C} %{v} %{A*} %{I*} %{P} %{$} %I\
- %{C:%{!E:%eGNU C does not support -C without using -E}}\
- %{M} %{MM} %{MD:-MD %b.d} %{MMD:-MMD %b.d} %{MG} %{trigraphs}\
- -$ %{!undef:%p %P} -D__ASSEMBLER__ \
- %c %{Os:-D__OPTIMIZE_SIZE__} %{O*:%{!O0:-D__OPTIMIZE__}}\
- %{ffast-math:-D__FAST_MATH__}\
- %{fshort-wchar:-D__WCHAR_TYPE__=short\\ unsigned\\ int}\
- %{traditional} %{ftraditional:-traditional}\
- %{traditional-cpp:-traditional}\
- %{fshow-column} %{fno-show-column}\
- %{fleading-underscore} %{fno-leading-underscore}\
- %{g*} %{W*} %{w} %{pedantic*} %{H} %{d*} %C %{D*} %{U*} %{i*} %Z\
- %i %{!M:%{!MM:%{!E:%{!pipe:%g.s}}}}%{E:%W{o*}}%{M:%W{o*}}%{MM:%W{o*}} |\n",
- "%{!M:%{!MM:%{!E:%{!S:as %a %Y\
- %{c:%W{o*}%{!o*:-o %w%b%O}}%{!c:-o %d%w%u%O}\
- %{!pipe:%g.s} %A\n }}}}"}},
+ "%(trad_capable_cpp) -lang-asm %(cpp_options)\
+ %{!M:%{!MM:%{!E:%(invoke_as)}}}", 0},
#include "specs.h"
/* Mark end of table */
- {0, {0}}
+ {0, 0, 0}
};
/* Number of elements in default_compilers, not counting the terminator. */
static int n_default_compilers
= (sizeof default_compilers / sizeof (struct compiler)) - 1;
-/* Here is the spec for running the linker, after compiling all files. */
-
-/* -u* was put back because both BSD and SysV seem to support it. */
-/* %{static:} simply prevents an error message if the target machine
- doesn't handle -static. */
-/* We want %{T*} after %{L*} and %D so that it can be used to specify linker
- scripts which exist in user specified directories, or in standard
- directories. */
-#ifdef LINK_COMMAND_SPEC
-/* Provide option to override link_command_spec from machine specific
- configuration files. */
-static const char *link_command_spec =
- LINK_COMMAND_SPEC;
-#else
-#ifdef LINK_LIBGCC_SPECIAL
-/* Don't generate -L options. */
-static const char *link_command_spec = "\
-%{!fsyntax-only: \
- %{!c:%{!M:%{!MM:%{!E:%{!S:%(linker) %l %X %{o*} %{A} %{d} %{e*} %{m} %{N} %{n} \
- %{r} %{s} %{t} %{u*} %{x} %{z} %{Z}\
- %{!A:%{!nostdlib:%{!nostartfiles:%S}}}\
- %{static:} %{L*} %o\
- %{!nostdlib:%{!nodefaultlibs:%G %L %G}}\
- %{!A:%{!nostdlib:%{!nostartfiles:%E}}}\
- %{T*}\
- \n }}}}}}";
-#else
-/* Use -L. */
-static const char *link_command_spec = "\
-%{!fsyntax-only: \
- %{!c:%{!M:%{!MM:%{!E:%{!S:%(linker) %l %X %{o*} %{A} %{d} %{e*} %{m} %{N} %{n} \
- %{r} %{s} %{t} %{u*} %{x} %{z} %{Z}\
- %{!A:%{!nostdlib:%{!nostartfiles:%S}}}\
- %{static:} %{L*} %D %o\
- %{!nostdlib:%{!nodefaultlibs:%G %L %G}}\
- %{!A:%{!nostdlib:%{!nostartfiles:%E}}}\
- %{T*}\
- \n }}}}}}";
-#endif
-#endif
-
/* A vector of options to give to the linker.
These options are accumulated by %x,
and substituted into the linker command with %X. */
{"--optimize", "-O", "oj"},
{"--output", "-o", "a"},
{"--output-class-directory", "-foutput-class-dir=", "ja"},
+ {"--param", "--param", "a"},
{"--pedantic", "-pedantic", 0},
{"--pedantic-errors", "-pedantic-errors", 0},
{"--pipe", "-pipe", 0},
static void
translate_options (argcp, argvp)
int *argcp;
- const char ***argvp;
+ const char *const **argvp;
{
int i;
int argc = *argcp;
- const char **argv = *argvp;
+ const char *const *argv = *argvp;
const char **newv =
(const char **) xmalloc ((argc + 2) * 2 * sizeof (const char *));
int newindex = 0;
{
size_t j;
/* Find a mapping that applies to this option. */
- for (j = 0; j < sizeof (option_map) / sizeof (option_map[0]); j++)
+ for (j = 0; j < ARRAY_SIZE (option_map); j++)
{
size_t optlen = strlen (option_map[j].name);
size_t arglen = strlen (argv[i]);
if (arglen < optlen)
{
size_t k;
- for (k = j + 1;
- k < sizeof (option_map) / sizeof (option_map[0]);
- k++)
+ for (k = j + 1; k < ARRAY_SIZE (option_map); k++)
if (strlen (option_map[k].name) >= arglen
&& !strncmp (argv[i], option_map[k].name, arglen))
{
break;
}
- if (k != sizeof (option_map) / sizeof (option_map[0]))
+ if (k != ARRAY_SIZE (option_map))
break;
}
/* If this mapping requires extra text at end of name,
accept that as "argument". */
- else if (index (arginfo, '*') != 0)
+ else if (strchr (arginfo, '*') != 0)
arg = argv[i] + optlen;
/* Otherwise, extra text at end means mismatch.
continue;
}
- else if (index (arginfo, '*') != 0)
+ else if (strchr (arginfo, '*') != 0)
{
error ("Incomplete `%s' option", option_map[j].name);
break;
}
/* Handle arguments. */
- if (index (arginfo, 'a') != 0)
+ if (strchr (arginfo, 'a') != 0)
{
if (arg == 0)
{
arg = argv[++i];
}
}
- else if (index (arginfo, '*') != 0)
+ else if (strchr (arginfo, '*') != 0)
;
- else if (index (arginfo, 'o') == 0)
+ else if (strchr (arginfo, 'o') == 0)
{
if (arg != 0)
error ("Extraneous argument to `%s' option",
}
/* Store the translation as one argv elt or as two. */
- if (arg != 0 && index (arginfo, 'j') != 0)
+ if (arg != 0 && strchr (arginfo, 'j') != 0)
newv[newindex++] = concat (option_map[j].equivalent, arg,
NULL_PTR);
else if (arg != 0)
p++;
else if (*p == '#')
{
- while (*p != '\n') p++;
+ while (*p != '\n')
+ p++;
p++;
}
else
return p;
}
+/* Structures to keep track of prefixes to try when looking for files. */
+
+struct prefix_list
+{
+ char *prefix; /* String to prepend to the path. */
+ struct prefix_list *next; /* Next in linked list. */
+ int require_machine_suffix; /* Don't use without machine_suffix. */
+ /* 2 means try both machine_suffix and just_machine_suffix. */
+ int *used_flag_ptr; /* 1 if a file was found with this prefix. */
+ int priority; /* Sort key - priority within list */
+};
+
+struct path_prefix
+{
+ struct prefix_list *plist; /* List of prefixes to try */
+ int max_len; /* Max length of a prefix in PLIST */
+ const char *name; /* Name of this list (used in config stuff) */
+};
+
+/* List of prefixes to try when looking for executables. */
+
+static struct path_prefix exec_prefixes = { 0, 0, "exec" };
+
+/* List of prefixes to try when looking for startup (crt0) files. */
+
+static struct path_prefix startfile_prefixes = { 0, 0, "startfile" };
+
+/* List of prefixes to try when looking for include files. */
+
+static struct path_prefix include_prefixes = { 0, 0, "include" };
+
+/* Suffix to attach to directories searched for commands.
+ This looks like `MACHINE/VERSION/'. */
+
+static const char *machine_suffix = 0;
+
+/* Suffix to attach to directories searched for commands.
+ This is just `MACHINE/'. */
+
+static const char *just_machine_suffix = 0;
+
+/* Adjusted value of GCC_EXEC_PREFIX envvar. */
+
+static const char *gcc_exec_prefix;
+
+/* Default prefixes to attach to command names. */
+
+#ifdef CROSS_COMPILE /* Don't use these prefixes for a cross compiler. */
+#undef MD_EXEC_PREFIX
+#undef MD_STARTFILE_PREFIX
+#undef MD_STARTFILE_PREFIX_1
+#endif
+
+/* If no prefixes defined, use the null string, which will disable them. */
+#ifndef MD_EXEC_PREFIX
+#define MD_EXEC_PREFIX ""
+#endif
+#ifndef MD_STARTFILE_PREFIX
+#define MD_STARTFILE_PREFIX ""
+#endif
+#ifndef MD_STARTFILE_PREFIX_1
+#define MD_STARTFILE_PREFIX_1 ""
+#endif
+
+/* Supply defaults for the standard prefixes. */
+
+#ifndef STANDARD_EXEC_PREFIX
+#define STANDARD_EXEC_PREFIX "/usr/local/lib/gcc-lib/"
+#endif
+#ifndef STANDARD_STARTFILE_PREFIX
+#define STANDARD_STARTFILE_PREFIX "/usr/local/lib/"
+#endif
+#ifndef TOOLDIR_BASE_PREFIX
+#define TOOLDIR_BASE_PREFIX "/usr/local/"
+#endif
+#ifndef STANDARD_BINDIR_PREFIX
+#define STANDARD_BINDIR_PREFIX "/usr/local/bin"
+#endif
+
+static const char *standard_exec_prefix = STANDARD_EXEC_PREFIX;
+static const char *standard_exec_prefix_1 = "/usr/lib/gcc/";
+static const char *md_exec_prefix = MD_EXEC_PREFIX;
+
+static const char *md_startfile_prefix = MD_STARTFILE_PREFIX;
+static const char *md_startfile_prefix_1 = MD_STARTFILE_PREFIX_1;
+static const char *standard_startfile_prefix = STANDARD_STARTFILE_PREFIX;
+static const char *standard_startfile_prefix_1 = "/lib/";
+static const char *standard_startfile_prefix_2 = "/usr/lib/";
+
+static const char *tooldir_base_prefix = TOOLDIR_BASE_PREFIX;
+static const char *tooldir_prefix;
+
+static const char *standard_bindir_prefix = STANDARD_BINDIR_PREFIX;
+
+/* Subdirectory to use for locating libraries. Set by
+ set_multilib_dir based on the compilation options. */
+
+static const char *multilib_dir;
\f
/* Structure to keep track of the specs that have been defined so far.
These are accessed using %(specname) or %[specname] in a compiler
};
#define INIT_STATIC_SPEC(NAME,PTR) \
-{ NAME, NULL_PTR, PTR, (struct spec_list *)0, sizeof (NAME)-1, 0 }
+{ NAME, NULL_PTR, PTR, (struct spec_list *) 0, sizeof (NAME) - 1, 0 }
/* List of statically defined specs. */
static struct spec_list static_specs[] =
{
INIT_STATIC_SPEC ("asm", &asm_spec),
INIT_STATIC_SPEC ("asm_final", &asm_final_spec),
+ INIT_STATIC_SPEC ("asm_options", &asm_options),
+ INIT_STATIC_SPEC ("invoke_as", &invoke_as),
INIT_STATIC_SPEC ("cpp", &cpp_spec),
+ INIT_STATIC_SPEC ("cpp_options", &cpp_options),
+ INIT_STATIC_SPEC ("trad_capable_cpp", &trad_capable_cpp),
INIT_STATIC_SPEC ("cc1", &cc1_spec),
+ INIT_STATIC_SPEC ("cc1_options", &cc1_options),
INIT_STATIC_SPEC ("cc1plus", &cc1plus_spec),
INIT_STATIC_SPEC ("endfile", &endfile_spec),
INIT_STATIC_SPEC ("link", &link_spec),
INIT_STATIC_SPEC ("multilib_matches", &multilib_matches),
INIT_STATIC_SPEC ("multilib_exclusions", &multilib_exclusions),
INIT_STATIC_SPEC ("linker", &linker_name_spec),
+ INIT_STATIC_SPEC ("link_libgcc", &link_libgcc_spec),
+ INIT_STATIC_SPEC ("md_exec_prefix", &md_exec_prefix),
+ INIT_STATIC_SPEC ("md_startfile_prefix", &md_startfile_prefix),
+ INIT_STATIC_SPEC ("md_startfile_prefix_1", &md_startfile_prefix_1),
};
#ifdef EXTRA_SPECS /* additional specs needed */
};
static struct spec_list_1 extra_specs_1[] = { EXTRA_SPECS };
-static struct spec_list * extra_specs = (struct spec_list *)0;
+static struct spec_list *extra_specs = (struct spec_list *) 0;
#endif
/* List of dynamically allocates specs that have been defined so far. */
-static struct spec_list *specs = (struct spec_list *)0;
-
+static struct spec_list *specs = (struct spec_list *) 0;
\f
+/* Add appropriate libgcc specs to OBSTACK, taking into account
+ various permutations of -shared-libgcc, -shared, and such. */
+
+static void
+init_gcc_specs (obstack, shared_name, static_name)
+ struct obstack *obstack;
+ const char *shared_name;
+ const char *static_name;
+{
+ char buffer[128];
+
+ /* If we see -shared-libgcc, then use the shared version. */
+ sprintf (buffer, "%%{shared-libgcc:%s}", shared_name);
+ obstack_grow (obstack, buffer, strlen (buffer));
+ /* If we see -static-libgcc, then use the shared version. */
+ sprintf (buffer, "%%{static-libgcc:%s}", static_name);
+ obstack_grow (obstack, buffer, strlen (buffer));
+ /* Otherwise, if we see -shared, then use the shared version. */
+ sprintf (buffer,
+ "%%{!shared-libgcc:%%{!static-libgcc:%%{shared:%s}}}",
+ shared_name);
+ obstack_grow (obstack, buffer, strlen (buffer));
+ /* Otherwise, use the static version. */
+ sprintf (buffer,
+ "%%{!shared-libgcc:%%{!static-libgcc:%%{!shared:%s}}}",
+ static_name);
+ obstack_grow (obstack, buffer, strlen (buffer));
+}
+
/* Initialize the specs lookup routines. */
static void
init_spec ()
{
- struct spec_list *next = (struct spec_list *)0;
- struct spec_list *sl = (struct spec_list *)0;
+ struct spec_list *next = (struct spec_list *) 0;
+ struct spec_list *sl = (struct spec_list *) 0;
int i;
if (specs)
#ifdef EXTRA_SPECS
extra_specs = (struct spec_list *)
- xcalloc (sizeof(struct spec_list),
- (sizeof(extra_specs_1)/sizeof(extra_specs_1[0])));
-
- for (i = (sizeof(extra_specs_1) / sizeof(extra_specs_1[0])) - 1; i >= 0; i--)
+ xcalloc (sizeof (struct spec_list), ARRAY_SIZE (extra_specs_1));
+
+ for (i = ARRAY_SIZE (extra_specs_1) - 1; i >= 0; i--)
{
sl = &extra_specs[i];
sl->name = extra_specs_1[i].name;
}
#endif
- for (i = (sizeof (static_specs) / sizeof (static_specs[0])) - 1; i >= 0; i--)
+ for (i = ARRAY_SIZE (static_specs) - 1; i >= 0; i--)
{
sl = &static_specs[i];
sl->next = next;
next = sl;
}
+#ifdef ENABLE_SHARED_LIBGCC
+ /* ??? If neither -shared-libgcc nor --static-libgcc was
+ seen, then we should be making an educated guess. Some proposed
+ heuristics for ELF include:
+
+ (1) If "-Wl,--export-dynamic", then it's a fair bet that the
+ program will be doing dynamic loading, which will likely
+ need the shared libgcc.
+
+ (2) If "-ldl", then it's also a fair bet that we're doing
+ dynamic loading.
+
+ (3) For each ET_DYN we're linking against (either through -lfoo
+ or /some/path/foo.so), check to see whether it or one of
+ its dependancies depends on a shared libgcc.
+
+ (4) If "-shared"
+
+ If the runtime is fixed to look for program headers instead
+ of calling __register_frame_info at all, for each object,
+ use the shared libgcc if any EH symbol referenced.
+
+ If crtstuff is fixed to not invoke __register_frame_info
+ automatically, for each object, use the shared libgcc if
+ any non-empty unwind section found.
+
+ Doing any of this probably requires invoking an external program to
+ do the actual object file scanning. */
+ {
+ const char *p = libgcc_spec;
+ int in_sep = 1;
+
+ /* Transform the extant libgcc_spec into one that uses the shared libgcc
+ when given the proper command line arguments. */
+ while (*p)
+ {
+ if (in_sep && *p == '-' && strncmp (p, "-lgcc", 5) == 0)
+ {
+ init_gcc_specs (&obstack,
+#ifdef NO_SHARED_LIBGCC_MULTILIB
+ "-lgcc_s"
+#else
+ "-lgcc_s%M"
+#endif
+ ,
+ "-lgcc");
+ p += 5;
+ in_sep = 0;
+ }
+ else if (in_sep && *p == 'l' && strncmp (p, "libgcc.a%s", 10) == 0)
+ {
+ /* Ug. We don't know shared library extensions. Hope that
+ systems that use this form don't do shared libraries. */
+ init_gcc_specs (&obstack,
+#ifdef NO_SHARED_LIBGCC_MULTILIB
+ "-lgcc_s"
+#else
+ "-lgcc_s%M"
+#endif
+ ,
+ "libgcc.a%s");
+ p += 10;
+ in_sep = 0;
+ }
+ else
+ {
+ obstack_1grow (&obstack, *p);
+ in_sep = (*p == ' ');
+ p += 1;
+ }
+ }
+
+ obstack_1grow (&obstack, '\0');
+ libgcc_spec = obstack_finish (&obstack);
+ }
+#endif
+
specs = sl;
}
-
\f
/* Change the value of spec NAME to SPEC. If SPEC is empty, then the spec is
removed; If the spec starts with a + then SPEC is added to the end of the
/* If this is the first call, initialize the statically allocated specs. */
if (!specs)
{
- struct spec_list *next = (struct spec_list *)0;
- for (i = (sizeof (static_specs) / sizeof (static_specs[0])) - 1;
- i >= 0; i--)
+ struct spec_list *next = (struct spec_list *) 0;
+ for (i = ARRAY_SIZE (static_specs) - 1; i >= 0; i--)
{
sl = &static_specs[i];
sl->next = next;
static int argbuf_index;
-/* We want this on by default all the time now. */
-#define MKTEMP_EACH_FILE
-
-#ifdef MKTEMP_EACH_FILE
-
-/* This is the list of suffixes and codes (%g/%u/%U) and the associated
- temp file. */
+/* This is the list of suffixes and codes (%g/%u/%U/%j) and the associated
+ temp file. If the HOST_BIT_BUCKET is used for %j, no entry is made for
+ it here. */
static struct temp_name {
const char *suffix; /* suffix associated with the code. */
int filename_length; /* strlen (filename). */
struct temp_name *next;
} *temp_names;
-#endif
-
/* Number of commands executed so far. */
static const char *programname;
\f
-/* Structures to keep track of prefixes to try when looking for files. */
-
-struct prefix_list
-{
- char *prefix; /* String to prepend to the path. */
- struct prefix_list *next; /* Next in linked list. */
- int require_machine_suffix; /* Don't use without machine_suffix. */
- /* 2 means try both machine_suffix and just_machine_suffix. */
- int *used_flag_ptr; /* 1 if a file was found with this prefix. */
-};
-
-struct path_prefix
-{
- struct prefix_list *plist; /* List of prefixes to try */
- int max_len; /* Max length of a prefix in PLIST */
- const char *name; /* Name of this list (used in config stuff) */
-};
-
-/* List of prefixes to try when looking for executables. */
-
-static struct path_prefix exec_prefixes = { 0, 0, "exec" };
-
-/* List of prefixes to try when looking for startup (crt0) files. */
-
-static struct path_prefix startfile_prefixes = { 0, 0, "startfile" };
-
-/* List of prefixes to try when looking for include files. */
-
-static struct path_prefix include_prefixes = { 0, 0, "include" };
-
-/* Suffix to attach to directories searched for commands.
- This looks like `MACHINE/VERSION/'. */
-
-static const char *machine_suffix = 0;
-
-/* Suffix to attach to directories searched for commands.
- This is just `MACHINE/'. */
-
-static const char *just_machine_suffix = 0;
-
-/* Adjusted value of GCC_EXEC_PREFIX envvar. */
-
-static const char *gcc_exec_prefix;
-
-/* Default prefixes to attach to command names. */
-
-#ifdef CROSS_COMPILE /* Don't use these prefixes for a cross compiler. */
-#undef MD_EXEC_PREFIX
-#undef MD_STARTFILE_PREFIX
-#undef MD_STARTFILE_PREFIX_1
-#endif
-
-#ifndef STANDARD_EXEC_PREFIX
-#define STANDARD_EXEC_PREFIX "/usr/local/lib/gcc-lib/"
-#endif /* !defined STANDARD_EXEC_PREFIX */
-
-static const char *standard_exec_prefix = STANDARD_EXEC_PREFIX;
-static const char *standard_exec_prefix_1 = "/usr/lib/gcc/";
-#ifdef MD_EXEC_PREFIX
-static const char *md_exec_prefix = MD_EXEC_PREFIX;
-#endif
-
-#ifndef STANDARD_STARTFILE_PREFIX
-#define STANDARD_STARTFILE_PREFIX "/usr/local/lib/"
-#endif /* !defined STANDARD_STARTFILE_PREFIX */
-
-#ifdef MD_STARTFILE_PREFIX
-static const char *md_startfile_prefix = MD_STARTFILE_PREFIX;
-#endif
-#ifdef MD_STARTFILE_PREFIX_1
-static const char *md_startfile_prefix_1 = MD_STARTFILE_PREFIX_1;
-#endif
-static const char *standard_startfile_prefix = STANDARD_STARTFILE_PREFIX;
-static const char *standard_startfile_prefix_1 = "/lib/";
-static const char *standard_startfile_prefix_2 = "/usr/lib/";
-
-#ifndef TOOLDIR_BASE_PREFIX
-#define TOOLDIR_BASE_PREFIX "/usr/local/"
-#endif
-static const char *tooldir_base_prefix = TOOLDIR_BASE_PREFIX;
-static const char *tooldir_prefix;
-
-#ifndef STANDARD_BINDIR_PREFIX
-#define STANDARD_BINDIR_PREFIX "/usr/local/bin"
-#endif
-static const char *standard_bindir_prefix = STANDARD_BINDIR_PREFIX;
-
-/* Subdirectory to use for locating libraries. Set by
- set_multilib_dir based on the compilation options. */
-
-static const char *multilib_dir;
-
/* Clear out the vector of arguments (after a command is executed). */
static void
}
\f
/* Load specs from a file name named FILENAME, replacing occurances of
- various different types of line-endings, \r\n, \n\r and just \r, with
+ various different types of line-endings, \r\n, \n\r and just \r, with
a single \n. */
-static char*
+static char *
load_specs (filename)
const char *filename;
{
int skip = 0;
char c = *buffer_p;
if (c == '\r')
- {
- if (buffer_p > buffer && *(buffer_p-1) == '\n') /* \n\r */
+ {
+ if (buffer_p > buffer && *(buffer_p - 1) == '\n') /* \n\r */
skip = 1;
- else if (*(buffer_p+1) == '\n') /* \r\n */
+ else if (*(buffer_p + 1) == '\n') /* \r\n */
skip = 1;
else /* \r */
c = '\n';
while (*p && *p != '\n')
p++;
- p++; /* Skip '\n' */
+ /* Skip '\n'. */
+ p++;
- if (!strncmp (p1, "%include", sizeof ("%include")-1)
+ if (!strncmp (p1, "%include", sizeof ("%include") - 1)
&& (p1[sizeof "%include" - 1] == ' '
|| p1[sizeof "%include" - 1] == '\t'))
{
char *new_filename;
p1 += sizeof "%include_noerr";
- while (*p1 == ' ' || *p1 == '\t') p1++;
+ while (*p1 == ' ' || *p1 == '\t')
+ p1++;
if (*p1++ != '<' || p[-2] != '>')
fatal ("specs %%include syntax malformed after %ld characters",
while (*p1 == ' ' || *p1 == '\t')
p1++;
- if (! ISALPHA ((unsigned char)*p1))
+ if (! ISALPHA ((unsigned char) *p1))
fatal ("specs %%rename syntax malformed after %ld characters",
(long) (p1 - buffer));
p2 = p1;
- while (*p2 && !ISSPACE ((unsigned char)*p2))
+ while (*p2 && !ISSPACE ((unsigned char) *p2))
p2++;
if (*p2 != ' ' && *p2 != '\t')
while (*p2 == ' ' || *p2 == '\t')
p2++;
- if (! ISALPHA ((unsigned char)*p2))
+ if (! ISALPHA ((unsigned char) *p2))
fatal ("specs %%rename syntax malformed after %ld characters",
(long) (p2 - buffer));
- /* Get new spec name */
+ /* Get new spec name. */
p3 = p2;
- while (*p3 && !ISSPACE ((unsigned char)*p3))
+ while (*p3 && !ISSPACE ((unsigned char) *p3))
p3++;
- if (p3 != p-1)
+ if (p3 != p - 1)
fatal ("specs %%rename syntax malformed after %ld characters",
(long) (p3 - buffer));
*p3 = '\0';
(n_compilers + 2) * sizeof (struct compiler)));
compilers[n_compilers].suffix = suffix;
- memset (compilers[n_compilers].spec, 0,
- sizeof compilers[n_compilers].spec);
- compilers[n_compilers].spec[0] = spec;
+ compilers[n_compilers].spec = spec;
n_compilers++;
memset (&compilers[n_compilers], 0, sizeof compilers[n_compilers]);
}
/* This is the common prefix we use to make temp file names.
It is chosen once for each run of this program.
- It is substituted into a spec by %g.
+ It is substituted into a spec by %g or %j.
Thus, all temp file names contain this prefix.
In practice, all temp file names start with this prefix.
FAIL_DELETE nonzero means delete it if a compilation step fails;
otherwise delete it in any case. */
-static void
+void
record_temp_file (filename, always_delete, fail_delete)
const char *filename;
int always_delete;
int fail_delete;
{
- register char * const name = xstrdup (filename);
+ register char *const name = xstrdup (filename);
if (always_delete)
{
}
/* Add a new environment variable */
- environ = (char **) xmalloc (sizeof (char *) * (num_envs+2));
+ environ = (char **) xmalloc (sizeof (char *) * (num_envs + 2));
*environ = str;
memcpy ((char *) (environ + 1), (char *) old_environ,
- sizeof (char *) * (num_envs+1));
+ sizeof (char *) * (num_envs + 1));
#endif /* VMS */
}
-#endif /* HAVE_PUTENV */
-
+#endif /* HAVE_PUTENV */
\f
/* Build a list of search directories from PATHS.
PREFIX is a string to prepend to the list.
{
if (!first_time)
obstack_1grow (&collect_obstack, PATH_SEPARATOR);
-
+
first_time = FALSE;
obstack_grow (&collect_obstack, pprefix->prefix, len);
obstack_grow (&collect_obstack, machine_suffix, suffix_len);
{
if (! first_time)
obstack_1grow (&collect_obstack, PATH_SEPARATOR);
-
+
first_time = FALSE;
obstack_grow (&collect_obstack, pprefix->prefix, len);
obstack_grow (&collect_obstack, just_machine_suffix,
while (dirs[i] != NULL_PTR)
free (dirs[i++]);
- free ((char *)dirs);
+ free ((char *) dirs);
}
/* Given three strings PROGNAME, BIN_PREFIX, PREFIX, return a string that gets
}
else
{
- strncpy (nstore, startp, endp-startp);
+ strncpy (nstore, startp, endp - startp);
if (! IS_DIR_SEPARATOR (endp[-1]))
{
- nstore[endp-startp] = DIR_SEPARATOR;
- nstore[endp-startp+1] = 0;
+ nstore[endp - startp] = DIR_SEPARATOR;
+ nstore[endp - startp + 1] = 0;
}
else
- nstore[endp-startp] = 0;
+ nstore[endp - startp] = 0;
}
strcat (nstore, progname);
if (! access (nstore, X_OK)
std_loc_p = 1;
free_split_directories (prog_dirs);
free_split_directories (bin_dirs);
- prog_dirs = bin_dirs = (char **)0;
+ prog_dirs = bin_dirs = (char **) 0;
return NULL_PTR;
}
}
/* Now build up the ..'s. */
for (i = common; i < n; i++)
{
- obstack_grow (&obstack, DIR_UP, sizeof (DIR_UP)-1);
+ obstack_grow (&obstack, DIR_UP, sizeof (DIR_UP) - 1);
obstack_1grow (&obstack, DIR_SEPARATOR);
}
int len = pprefix->max_len + strlen (name) + strlen (file_suffix) + 1;
#ifdef DEFAULT_ASSEMBLER
- if (! strcmp(name, "as") && access (DEFAULT_ASSEMBLER, mode) == 0)
+ if (! strcmp (name, "as") && access (DEFAULT_ASSEMBLER, mode) == 0)
return xstrdup (DEFAULT_ASSEMBLER);
#endif
/* Determine the filename to execute (special case for absolute paths). */
- if (IS_DIR_SEPARATOR (*name)
-#ifdef HAVE_DOS_BASED_FILE_SYSTEM
- /* Check for disk name on MS-DOS-based systems. */
- || (name[0] && name[1] == ':' && IS_DIR_SEPARATOR (name[2]))
-#endif
- )
+ if (IS_ABSOLUTE_PATHNAME (name))
{
if (access (name, mode) == 0)
{
return 0;
}
-/* Add an entry for PREFIX in PLIST. If FIRST is set, it goes
- at the start of the list, otherwise it goes at the end.
+/* Ranking of prefixes in the sort list. -B prefixes are put before
+ all others. */
+
+enum path_prefix_priority
+{
+ PREFIX_PRIORITY_B_OPT,
+ PREFIX_PRIORITY_LAST
+};
+
+/* Add an entry for PREFIX in PLIST. The PLIST is kept in assending
+ order according to PRIORITY. Within each PRIORITY, new entries are
+ appended.
If WARN is nonzero, we will warn if no file is found
through this prefix. WARN should point to an int
2 means try both machine_suffix and just_machine_suffix. */
static void
-add_prefix (pprefix, prefix, component, first, require_machine_suffix, warn)
+add_prefix (pprefix, prefix, component, priority, require_machine_suffix, warn)
struct path_prefix *pprefix;
const char *prefix;
const char *component;
- int first;
+ /* enum prefix_priority */ int priority;
int require_machine_suffix;
int *warn;
{
struct prefix_list *pl, **prev;
int len;
- if (! first && pprefix->plist)
- {
- for (pl = pprefix->plist; pl->next; pl = pl->next)
- ;
- prev = &pl->next;
- }
- else
- prev = &pprefix->plist;
+ for (prev = &pprefix->plist;
+ (*prev) != NULL && (*prev)->priority <= priority;
+ prev = &(*prev)->next)
+ ;
/* Keep track of the longest prefix */
pl->prefix = save_string (prefix, len);
pl->require_machine_suffix = require_machine_suffix;
pl->used_flag_ptr = warn;
+ pl->priority = priority;
if (warn)
*warn = 0;
- if (*prev)
- pl->next = *prev;
- else
- pl->next = (struct prefix_list *) 0;
- *prev = pl;
+ /* Insert after PREV */
+ pl->next = (*prev);
+ (*prev) = pl;
}
-
-/* Print warnings for any prefixes in the list PPREFIX that were not used. */
-
-static void
-unused_prefix_warnings (pprefix)
- struct path_prefix *pprefix;
-{
- struct prefix_list *pl = pprefix->plist;
-
- while (pl)
- {
- if (pl->used_flag_ptr != 0 && !*pl->used_flag_ptr)
- {
- if (pl->require_machine_suffix && machine_suffix)
- error ("file path prefix `%s%s' never used", pl->prefix,
- machine_suffix);
- else
- error ("file path prefix `%s' never used", pl->prefix);
-
- /* Prevent duplicate warnings. */
- *pl->used_flag_ptr = 1;
- }
-
- pl = pl->next;
- }
-}
-
\f
/* Execute the command specified by the arguments on the current line of spec.
When using pipes, this includes several piped-together commands
int n_commands; /* # of command. */
char *string;
struct command
- {
- const char *prog; /* program name. */
- const char **argv; /* vector of args. */
- int pid; /* pid of process for this command. */
- };
+ {
+ const char *prog; /* program name. */
+ const char **argv; /* vector of args. */
+ int pid; /* pid of process for this command. */
+ };
struct command *commands; /* each command buffer with above info. */
n_commands++;
/* Get storage for each command. */
- commands
- = (struct command *) alloca (n_commands * sizeof (struct command));
+ commands = (struct command *) alloca (n_commands * sizeof (struct command));
/* Split argbuf into its separate piped processes,
and record info about each one.
if (strcmp (argbuf[i], "|") == 0)
{ /* each command. */
#if defined (__MSDOS__) || defined (OS2) || defined (VMS)
- fatal ("-pipe not supported");
+ fatal ("-pipe not supported");
#endif
argbuf[i] = 0; /* termination of command args. */
commands[n_commands].prog = argbuf[i + 1];
/* For help listings, put a blank line between sub-processes. */
if (print_help_list)
fputc ('\n', stderr);
-
+
/* Print each piped command as a separate line. */
- for (i = 0; i < n_commands ; i++)
+ for (i = 0; i < n_commands; i++)
{
- const char **j;
+ const char *const *j;
for (j = commands[i].argv; *j; j++)
fprintf (stderr, " %s", *j);
char *errmsg_fmt, *errmsg_arg;
const char *string = commands[i].argv[0];
- commands[i].pid = pexecute (string, commands[i].argv,
+ /* For some bizarre reason, the second argument of execvp() is
+ char *const *, not const char *const *. */
+ commands[i].pid = pexecute (string, (char *const *) commands[i].argv,
programname, temp_filename,
&errmsg_fmt, &errmsg_arg,
((i == 0 ? PEXECUTE_FIRST : 0)
double ut = 0.0, st = 0.0;
#endif
- for (i = 0; i < n_commands; )
+ for (i = 0; i < n_commands;)
{
int j;
int status;
getrusage (RUSAGE_CHILDREN, &rus);
d.tv_sec = rus.ru_utime.tv_sec - prus.ru_utime.tv_sec;
d.tv_usec = rus.ru_utime.tv_usec - prus.ru_utime.tv_usec;
- ut = (double)d.tv_sec + (double)d.tv_usec / 1.0e6;
-
+ ut = (double) d.tv_sec + (double) d.tv_usec / 1.0e6;
+
d.tv_sec = rus.ru_stime.tv_sec - prus.ru_stime.tv_sec;
d.tv_usec = rus.ru_stime.tv_usec - prus.ru_stime.tv_usec;
- st = (double)d.tv_sec + (double)d.tv_usec / 1.0e6;
+ st = (double) d.tv_sec + (double) d.tv_usec / 1.0e6;
}
#endif
if (commands[j].pid == pid)
{
i++;
- if (status != 0)
+ if (WIFSIGNALED (status))
{
- if (WIFSIGNALED (status))
- {
- fatal ("Internal compiler error: program %s got fatal signal %d",
- commands[j].prog, WTERMSIG (status));
- signal_count++;
- ret_code = -1;
- }
- else if (WIFEXITED (status)
- && WEXITSTATUS (status) >= MIN_FATAL_STATUS)
- {
- if (WEXITSTATUS (status) > greatest_status)
- greatest_status = WEXITSTATUS (status);
- ret_code = -1;
- }
+#ifdef SIGPIPE
+ /* SIGPIPE is a special case. It happens in -pipe mode
+ when the compiler dies before the preprocessor is
+ done, or the assembler dies before the compiler is
+ done. There's generally been an error already, and
+ this is just fallout. So don't generate another error
+ unless we would otherwise have succeeded. */
+ if (WTERMSIG (status) == SIGPIPE
+ && (signal_count || greatest_status >= MIN_FATAL_STATUS))
+ ;
+ else
+#endif
+ fatal ("\
+Internal error: %s (program %s)\n\
+Please submit a full bug report.\n\
+See %s for instructions.",
+ strsignal (WTERMSIG (status)), commands[j].prog,
+ GCCBUGURL);
+ signal_count++;
+ ret_code = -1;
+ }
+ else if (WIFEXITED (status)
+ && WEXITSTATUS (status) >= MIN_FATAL_STATUS)
+ {
+ if (WEXITSTATUS (status) > greatest_status)
+ greatest_status = WEXITSTATUS (status);
+ ret_code = -1;
}
#ifdef HAVE_GETRUSAGE
if (report_times && ut + st != 0)
const char *part1;
const char **args;
int live_cond;
- int validated;
+ unsigned char validated;
+ unsigned char ordering;
};
static struct switchstr *switches;
/* Gives value to pass as "warn" to add_prefix for standard prefixes. */
static int *warn_std_ptr = 0;
-
\f
#if defined(HAVE_OBJECT_SUFFIX) || defined(HAVE_EXECUTABLE_SUFFIX)
if (name == NULL)
return NULL;
-
+
len = strlen (name);
#ifdef HAVE_OBJECT_SUFFIX
}
#endif
-#ifdef HAVE_EXECUTABLE_SUFFIX
+#if defined(HAVE_EXECUTABLE_SUFFIX) && !defined(NO_AUTO_EXE_SUFFIX)
/* If there is no filetype, make it the executable suffix (which includes
the "."). But don't get confused if we have just "-o". */
if (! do_exe || EXECUTABLE_SUFFIX[0] == 0 || (len == 2 && name[0] == '-'))
static void
display_help ()
{
- printf ("Usage: %s [options] file...\n", programname);
- printf ("Options:\n");
+ printf (_("Usage: %s [options] file...\n"), programname);
+ fputs (_("Options:\n"), stdout);
- printf (" -pass-exit-codes Exit with highest error code from a phase\n");
- printf (" --help Display this information\n");
+ fputs (_(" -pass-exit-codes Exit with highest error code from a phase\n"), stdout);
+ fputs (_(" --help Display this information\n"), stdout);
+ fputs (_(" --target-help Display target specific command line options\n"), stdout);
if (! verbose_flag)
- printf (" (Use '-v --help' to display command line options of sub-processes)\n");
- printf (" -dumpspecs Display all of the built in spec strings\n");
- printf (" -dumpversion Display the version of the compiler\n");
- printf (" -dumpmachine Display the compiler's target processor\n");
- printf (" -print-search-dirs Display the directories in the compiler's search path\n");
- printf (" -print-libgcc-file-name Display the name of the compiler's companion library\n");
- printf (" -print-file-name=<lib> Display the full path to library <lib>\n");
- printf (" -print-prog-name=<prog> Display the full path to compiler component <prog>\n");
- printf (" -print-multi-directory Display the root directory for versions of libgcc\n");
- printf (" -print-multi-lib Display the mapping between command line options and\n");
- printf (" multiple library search directories\n");
- printf (" -Wa,<options> Pass comma-separated <options> on to the assembler\n");
- printf (" -Wp,<options> Pass comma-separated <options> on to the preprocessor\n");
- printf (" -Wl,<options> Pass comma-separated <options> on to the linker\n");
- printf (" -Xlinker <arg> Pass <arg> on to the linker\n");
- printf (" -save-temps Do not delete intermediate files\n");
- printf (" -pipe Use pipes rather than intermediate files\n");
- printf (" -time Time the execution of each subprocess\n");
- printf (" -specs=<file> Override builtin specs with the contents of <file>\n");
- printf (" -std=<standard> Assume that the input sources are for <standard>\n");
- printf (" -B <directory> Add <directory> to the compiler's search paths\n");
- printf (" -b <machine> Run gcc for target <machine>, if installed\n");
- printf (" -V <version> Run gcc version number <version>, if installed\n");
- printf (" -v Display the programs invoked by the compiler\n");
- printf (" -E Preprocess only; do not compile, assemble or link\n");
- printf (" -S Compile only; do not assemble or link\n");
- printf (" -c Compile and assemble, but do not link\n");
- printf (" -o <file> Place the output into <file>\n");
- printf (" -x <language> Specify the language of the following input files\n");
- printf (" Permissable languages include: c c++ assembler none\n");
- printf (" 'none' means revert to the default behaviour of\n");
- printf (" guessing the language based on the file's extension\n");
-
- printf ("\nOptions starting with -g, -f, -m, -O or -W are automatically passed on to\n");
- printf ("the various sub-processes invoked by %s. In order to pass other options\n",
- programname);
- printf ("on to these processes the -W<letter> options must be used.\n");
+ fputs (_(" (Use '-v --help' to display command line options of sub-processes)\n"), stdout);
+ fputs (_(" -dumpspecs Display all of the built in spec strings\n"), stdout);
+ fputs (_(" -dumpversion Display the version of the compiler\n"), stdout);
+ fputs (_(" -dumpmachine Display the compiler's target processor\n"), stdout);
+ fputs (_(" -print-search-dirs Display the directories in the compiler's search path\n"), stdout);
+ fputs (_(" -print-libgcc-file-name Display the name of the compiler's companion library\n"), stdout);
+ fputs (_(" -print-file-name=<lib> Display the full path to library <lib>\n"), stdout);
+ fputs (_(" -print-prog-name=<prog> Display the full path to compiler component <prog>\n"), stdout);
+ fputs (_(" -print-multi-directory Display the root directory for versions of libgcc\n"), stdout);
+ fputs (_("\
+ -print-multi-lib Display the mapping between command line options and\n\
+ multiple library search directories\n"), stdout);
+ fputs (_(" -Wa,<options> Pass comma-separated <options> on to the assembler\n"), stdout);
+ fputs (_(" -Wp,<options> Pass comma-separated <options> on to the preprocessor\n"), stdout);
+ fputs (_(" -Wl,<options> Pass comma-separated <options> on to the linker\n"), stdout);
+ fputs (_(" -Xlinker <arg> Pass <arg> on to the linker\n"), stdout);
+ fputs (_(" -save-temps Do not delete intermediate files\n"), stdout);
+ fputs (_(" -pipe Use pipes rather than intermediate files\n"), stdout);
+ fputs (_(" -time Time the execution of each subprocess\n"), stdout);
+ fputs (_(" -specs=<file> Override builtin specs with the contents of <file>\n"), stdout);
+ fputs (_(" -std=<standard> Assume that the input sources are for <standard>\n"), stdout);
+ fputs (_(" -B <directory> Add <directory> to the compiler's search paths\n"), stdout);
+ fputs (_(" -b <machine> Run gcc for target <machine>, if installed\n"), stdout);
+ fputs (_(" -V <version> Run gcc version number <version>, if installed\n"), stdout);
+ fputs (_(" -v Display the programs invoked by the compiler\n"), stdout);
+ fputs (_(" -E Preprocess only; do not compile, assemble or link\n"), stdout);
+ fputs (_(" -S Compile only; do not assemble or link\n"), stdout);
+ fputs (_(" -c Compile and assemble, but do not link\n"), stdout);
+ fputs (_(" -o <file> Place the output into <file>\n"), stdout);
+ fputs (_("\
+ -x <language> Specify the language of the following input files\n\
+ Permissable languages include: c c++ assembler none\n\
+ 'none' means revert to the default behaviour of\n\
+ guessing the language based on the file's extension\n\
+"), stdout);
+
+ printf (_("\
+\nOptions starting with -g, -f, -m, -O, -W, or --param are automatically\n\
+ passed on to the various sub-processes invoked by %s. In order to pass\n\
+ other options on to these processes the -W<letter> options must be used.\n\
+"), programname);
/* The rest of the options are displayed by invocations of the various
sub-processes. */
}
-static void
-add_preprocessor_option (option, len)
- const char * option;
+static void
+add_preprocessor_option (option, len)
+ const char *option;
int len;
-{
+{
n_preprocessor_options++;
-
+
if (! preprocessor_options)
preprocessor_options
= (char **) xmalloc (n_preprocessor_options * sizeof (char *));
preprocessor_options
= (char **) xrealloc (preprocessor_options,
n_preprocessor_options * sizeof (char *));
-
+
preprocessor_options [n_preprocessor_options - 1] =
save_string (option, len);
}
-
-static void
-add_assembler_option (option, len)
- const char * option;
+
+static void
+add_assembler_option (option, len)
+ const char *option;
int len;
{
n_assembler_options++;
assembler_options [n_assembler_options - 1] = save_string (option, len);
}
-
-static void
-add_linker_option (option, len)
- const char * option;
- int len;
+
+static void
+add_linker_option (option, len)
+ const char *option;
+ int len;
{
n_linker_options++;
static void
process_command (argc, argv)
int argc;
- const char **argv;
+ const char *const *argv;
{
register int i;
const char *temp;
int have_c = 0;
int have_o = 0;
int lang_n_infiles = 0;
+#ifdef MODIFY_TARGET_NAME
+ int is_modify_target_name;
+ int j;
+#endif
GET_ENV_PATH_LIST (gcc_exec_prefix, "GCC_EXEC_PREFIX");
/* Figure compiler version from version string. */
- compiler_version = temp1 = xstrdup (version_string);
+ compiler_version = temp1 = xstrdup (version_string);
for (; *temp1; ++temp1)
{
if (gcc_exec_prefix)
{
int len = strlen (gcc_exec_prefix);
- if (len > (int) sizeof ("/lib/gcc-lib/")-1
+
+ if (len > (int) sizeof ("/lib/gcc-lib/") - 1
&& (IS_DIR_SEPARATOR (gcc_exec_prefix[len-1])))
{
temp = gcc_exec_prefix + len - sizeof ("/lib/gcc-lib/") + 1;
if (IS_DIR_SEPARATOR (*temp)
- && strncmp (temp+1, "lib", 3) == 0
+ && strncmp (temp + 1, "lib", 3) == 0
&& IS_DIR_SEPARATOR (temp[4])
- && strncmp (temp+5, "gcc-lib", 7) == 0)
+ && strncmp (temp + 5, "gcc-lib", 7) == 0)
len -= sizeof ("/lib/gcc-lib/") - 1;
}
set_std_prefix (gcc_exec_prefix, len);
- add_prefix (&exec_prefixes, gcc_exec_prefix, "GCC", 0, 0, NULL_PTR);
- add_prefix (&startfile_prefixes, gcc_exec_prefix, "GCC", 0, 0, NULL_PTR);
+ add_prefix (&exec_prefixes, gcc_exec_prefix, "GCC",
+ PREFIX_PRIORITY_LAST, 0, NULL_PTR);
+ add_prefix (&startfile_prefixes, gcc_exec_prefix, "GCC",
+ PREFIX_PRIORITY_LAST, 0, NULL_PTR);
}
/* COMPILER_PATH and LIBRARY_PATH have values
{
if (*endp == PATH_SEPARATOR || *endp == 0)
{
- strncpy (nstore, startp, endp-startp);
+ strncpy (nstore, startp, endp - startp);
if (endp == startp)
strcpy (nstore, concat (".", dir_separator_str, NULL_PTR));
else if (!IS_DIR_SEPARATOR (endp[-1]))
{
- nstore[endp-startp] = DIR_SEPARATOR;
- nstore[endp-startp+1] = 0;
+ nstore[endp - startp] = DIR_SEPARATOR;
+ nstore[endp - startp + 1] = 0;
}
else
- nstore[endp-startp] = 0;
- add_prefix (&exec_prefixes, nstore, 0, 0, 0, NULL_PTR);
+ nstore[endp - startp] = 0;
+ add_prefix (&exec_prefixes, nstore, 0,
+ PREFIX_PRIORITY_LAST, 0, NULL_PTR);
add_prefix (&include_prefixes,
concat (nstore, "include", NULL_PTR),
- 0, 0, 0, NULL_PTR);
+ 0, PREFIX_PRIORITY_LAST, 0, NULL_PTR);
if (*endp == 0)
break;
endp = startp = endp + 1;
{
if (*endp == PATH_SEPARATOR || *endp == 0)
{
- strncpy (nstore, startp, endp-startp);
+ strncpy (nstore, startp, endp - startp);
if (endp == startp)
strcpy (nstore, concat (".", dir_separator_str, NULL_PTR));
else if (!IS_DIR_SEPARATOR (endp[-1]))
{
- nstore[endp-startp] = DIR_SEPARATOR;
- nstore[endp-startp+1] = 0;
+ nstore[endp - startp] = DIR_SEPARATOR;
+ nstore[endp - startp + 1] = 0;
}
else
- nstore[endp-startp] = 0;
+ nstore[endp - startp] = 0;
add_prefix (&startfile_prefixes, nstore, NULL_PTR,
- 0, 0, NULL_PTR);
+ PREFIX_PRIORITY_LAST, 0, NULL_PTR);
if (*endp == 0)
break;
endp = startp = endp + 1;
{
if (*endp == PATH_SEPARATOR || *endp == 0)
{
- strncpy (nstore, startp, endp-startp);
+ strncpy (nstore, startp, endp - startp);
if (endp == startp)
strcpy (nstore, concat (".", dir_separator_str, NULL_PTR));
else if (!IS_DIR_SEPARATOR (endp[-1]))
{
- nstore[endp-startp] = DIR_SEPARATOR;
- nstore[endp-startp+1] = 0;
+ nstore[endp - startp] = DIR_SEPARATOR;
+ nstore[endp - startp + 1] = 0;
}
else
- nstore[endp-startp] = 0;
+ nstore[endp - startp] = 0;
add_prefix (&startfile_prefixes, nstore, NULL_PTR,
- 0, 0, NULL_PTR);
+ PREFIX_PRIORITY_LAST, 0, NULL_PTR);
if (*endp == 0)
break;
endp = startp = endp + 1;
/* Scan argv twice. Here, the first time, just count how many switches
there will be in their vector, and how many input files in theirs.
+ Also parse any switches that determine the configuration name, such as -b.
Here we also parse the switches that cc itself uses (e.g. -v). */
for (i = 1; i < argc; i++)
init_spec ();
for (sl = specs; sl; sl = sl->next)
printf ("*%s:\n%s\n\n", sl->name, *(sl->ptr_spec));
- if (link_command_spec)
- printf ("*link_command:\n%s\n\n", link_command_spec);
+ if (link_command_spec)
+ printf ("*link_command:\n%s\n\n", link_command_spec);
exit (0);
}
else if (! strcmp (argv[i], "-dumpversion"))
else if (! strcmp (argv[i], "-dumpmachine"))
{
printf ("%s\n", spec_machine);
- exit (0);
+ exit (0);
}
else if (strcmp (argv[i], "-fhelp") == 0)
{
/* We will be passing a dummy file on to the sub-processes. */
n_infiles++;
n_switches++;
-
+
add_preprocessor_option ("--help", 6);
add_assembler_option ("--help", 6);
add_linker_option ("--help", 6);
}
+ else if (strcmp (argv[i], "-ftarget-help") == 0)
+ {
+ /* translate_options() has turned --target-help into -ftarget-help. */
+ target_help_flag = 1;
+
+ /* We will be passing a dummy file on to the sub-processes. */
+ n_infiles++;
+ n_switches++;
+
+ add_preprocessor_option ("--target-help", 13);
+ add_assembler_option ("--target-help", 13);
+ add_linker_option ("--target-help", 13);
+ }
else if (! strcmp (argv[i], "-pass-exit-codes"))
{
pass_exit_codes = 1;
add_assembler_option (argv[i] + prev, j - prev);
prev = j + 1;
}
-
+
/* Record the part after the last comma. */
add_assembler_option (argv[i] + prev, j - prev);
}
add_preprocessor_option (argv[i] + prev, j - prev);
prev = j + 1;
}
-
+
/* Record the part after the last comma. */
add_preprocessor_option (argv[i] + prev, j - prev);
}
if (++i >= argc)
fatal ("argument to `-specs' is missing");
- user->next = (struct user_specs *)0;
+ user->next = (struct user_specs *) 0;
user->filename = argv[i];
if (user_specs_tail)
user_specs_tail->next = user;
if (strlen (argv[i]) == 7)
fatal ("argument to `-specs=' is missing");
- user->next = (struct user_specs *)0;
- user->filename = argv[i]+7;
+ user->next = (struct user_specs *) 0;
+ user->filename = argv[i] + 7;
if (user_specs_tail)
user_specs_tail->next = user;
else
switch (c)
{
case 'b':
- n_switches++;
+ n_switches++;
if (p[1] == 0 && i + 1 == argc)
fatal ("argument to `-b' is missing");
if (p[1] == 0)
value = argv[++i];
else
value = p + 1;
- add_prefix (&exec_prefixes, value, NULL_PTR, 1, 0, &warn_B);
- add_prefix (&startfile_prefixes, value, NULL_PTR,
- 1, 0, &warn_B);
- add_prefix (&include_prefixes, concat (value, "include",
- NULL_PTR),
- NULL_PTR, 1, 0, NULL_PTR);
-
- /* As a kludge, if the arg is "[foo/]stageN/", just add
- "[foo/]include" to the include prefix. */
{
+ /* As a kludge, if the arg is "[foo/]stageN/", just
+ add "[foo/]include" to the include prefix. */
int len = strlen (value);
if ((len == 7
|| (len > 7
{
if (len == 7)
add_prefix (&include_prefixes, "include", NULL_PTR,
- 1, 0, NULL_PTR);
+ PREFIX_PRIORITY_B_OPT, 0, NULL_PTR);
else
{
char *string = xmalloc (len + 1);
strncpy (string, value, len-7);
strcpy (string+len-7, "include");
add_prefix (&include_prefixes, string, NULL_PTR,
- 1, 0, NULL_PTR);
+ PREFIX_PRIORITY_B_OPT, 0, NULL_PTR);
}
}
}
- n_switches++;
+ add_prefix (&exec_prefixes, value, NULL_PTR,
+ PREFIX_PRIORITY_B_OPT, 0, &warn_B);
+ add_prefix (&startfile_prefixes, value, NULL_PTR,
+ PREFIX_PRIORITY_B_OPT, 0, &warn_B);
+ add_prefix (&include_prefixes, concat (value, "include",
+ NULL_PTR),
+ NULL_PTR,
+ PREFIX_PRIORITY_B_OPT, 0, NULL_PTR);
+ n_switches++;
}
break;
if (! have_c)
{
int skip;
-
+
/* Forward scan, just in case -S or -c is specified
after -o. */
int j = i + 1;
#endif
#if defined(HAVE_EXECUTABLE_SUFFIX) || defined(HAVE_OBJECT_SUFFIX)
if (p[1] == 0)
- argv[i+1] = convert_filename (argv[i+1], ! have_c);
+ argv[i + 1] = convert_filename (argv[i + 1], ! have_c);
else
argv[i] = convert_filename (argv[i], ! have_c);
#endif
default:
normal_switch:
+
+#ifdef MODIFY_TARGET_NAME
+ is_modify_target_name = 0;
+
+ for (j = 0;
+ j < sizeof modify_target / sizeof modify_target[0]; j++)
+ if (! strcmp (argv[i], modify_target[j].sw))
+ {
+ char *new_name
+ = (char *) xmalloc (strlen (modify_target[j].str)
+ + strlen (spec_machine));
+ const char *p, *r;
+ char *q;
+ int made_addition = 0;
+
+ is_modify_target_name = 1;
+ for (p = spec_machine, q = new_name; *p != 0; )
+ {
+ if (modify_target[j].add_del == DELETE
+ && (! strncmp (q, modify_target[j].str,
+ strlen (modify_target[j].str))))
+ p += strlen (modify_target[j].str);
+ else if (modify_target[j].add_del == ADD
+ && ! made_addition && *p == '-')
+ {
+ for (r = modify_target[j].str; *r != 0; )
+ *q++ = *r++;
+ made_addition = 1;
+ }
+
+ *q++ = *p++;
+ }
+
+ spec_machine = new_name;
+ }
+
+ if (is_modify_target_name)
+ break;
+#endif
+
n_switches++;
if (SWITCH_TAKES_ARG (c) > (p[1] != 0))
as well as trying the machine and the version. */
#ifndef OS2
add_prefix (&exec_prefixes, standard_exec_prefix, "GCC",
- 0, 1, warn_std_ptr);
+ PREFIX_PRIORITY_LAST, 1, warn_std_ptr);
add_prefix (&exec_prefixes, standard_exec_prefix, "BINUTILS",
- 0, 2, warn_std_ptr);
+ PREFIX_PRIORITY_LAST, 2, warn_std_ptr);
add_prefix (&exec_prefixes, standard_exec_prefix_1, "BINUTILS",
- 0, 2, warn_std_ptr);
+ PREFIX_PRIORITY_LAST, 2, warn_std_ptr);
#endif
add_prefix (&startfile_prefixes, standard_exec_prefix, "BINUTILS",
- 0, 1, warn_std_ptr);
+ PREFIX_PRIORITY_LAST, 1, warn_std_ptr);
add_prefix (&startfile_prefixes, standard_exec_prefix_1, "BINUTILS",
- 0, 1, warn_std_ptr);
+ PREFIX_PRIORITY_LAST, 1, warn_std_ptr);
- tooldir_prefix = concat (tooldir_base_prefix, spec_machine,
+ tooldir_prefix = concat (tooldir_base_prefix, spec_machine,
dir_separator_str, NULL_PTR);
/* If tooldir is relative, base it on exec_prefixes. A relative
directories, so that we can search both the user specified directory
and the standard place. */
- if (!IS_DIR_SEPARATOR (*tooldir_prefix))
+ if (!IS_ABSOLUTE_PATHNAME (tooldir_prefix))
{
if (gcc_exec_prefix)
{
spec_version, dir_separator_str, tooldir_prefix, NULL_PTR);
add_prefix (&exec_prefixes,
- concat (gcc_exec_tooldir_prefix, "bin",
+ concat (gcc_exec_tooldir_prefix, "bin",
dir_separator_str, NULL_PTR),
- NULL_PTR, 0, 0, NULL_PTR);
+ NULL_PTR, PREFIX_PRIORITY_LAST, 0, NULL_PTR);
add_prefix (&startfile_prefixes,
- concat (gcc_exec_tooldir_prefix, "lib",
+ concat (gcc_exec_tooldir_prefix, "lib",
dir_separator_str, NULL_PTR),
- NULL_PTR, 0, 0, NULL_PTR);
+ NULL_PTR, PREFIX_PRIORITY_LAST, 0, NULL_PTR);
}
tooldir_prefix = concat (standard_exec_prefix, spec_machine,
- dir_separator_str, spec_version,
+ dir_separator_str, spec_version,
dir_separator_str, tooldir_prefix, NULL_PTR);
}
- add_prefix (&exec_prefixes,
- concat (tooldir_prefix, "bin", dir_separator_str, NULL_PTR),
- "BINUTILS", 0, 0, NULL_PTR);
+ add_prefix (&exec_prefixes,
+ concat (tooldir_prefix, "bin", dir_separator_str, NULL_PTR),
+ "BINUTILS", PREFIX_PRIORITY_LAST, 0, NULL_PTR);
add_prefix (&startfile_prefixes,
concat (tooldir_prefix, "lib", dir_separator_str, NULL_PTR),
- "BINUTILS", 0, 0, NULL_PTR);
+ "BINUTILS", PREFIX_PRIORITY_LAST, 0, NULL_PTR);
/* More prefixes are enabled in main, after we read the specs file
and determine whether this is cross-compilation or not. */
-
/* Then create the space for the vectors and scan again. */
switches = ((struct switchstr *)
for (i = 1; i < argc; i++)
{
/* Just skip the switches that were handled by the preceding loop. */
+#ifdef MODIFY_TARGET_NAME
+ is_modify_target_name = 0;
+
+ for (j = 0; j < sizeof modify_target / sizeof modify_target[0]; j++)
+ if (! strcmp (argv[i], modify_target[j].sw))
+ is_modify_target_name = 1;
+
+ if (is_modify_target_name)
+ ;
+ else
+#endif
if (! strncmp (argv[i], "-Wa,", 4))
;
else if (! strncmp (argv[i], "-Wp,", 4))
;
else if (! strcmp (argv[i], "-print-multi-directory"))
;
+ else if (strcmp (argv[i], "-ftarget-help") == 0)
+ {
+ /* Create a dummy input file, so that we can pass --target-help on to
+ the various sub-processes. */
+ infiles[n_infiles].language = "c";
+ infiles[n_infiles++].name = "target-dummy";
+
+ /* Preserve the --target-help switch so that it can be caught by
+ the cc1 spec string. */
+ switches[n_switches].part1 = "--target-help";
+ switches[n_switches].args = 0;
+ switches[n_switches].live_cond = SWITCH_OK;
+ switches[n_switches].validated = 0;
+
+ n_switches++;
+ }
else if (strcmp (argv[i], "-fhelp") == 0)
{
if (verbose_flag)
the various sub-processes. */
infiles[n_infiles].language = "c";
infiles[n_infiles++].name = "help-dummy";
-
+
/* Preserve the --help switch so that it can be caught by the
cc1 spec string. */
switches[n_switches].part1 = "--help";
switches[n_switches].args = 0;
switches[n_switches].live_cond = SWITCH_OK;
- switches[n_switches].validated = 0;
-
+ switches[n_switches].validated = 0;
+
n_switches++;
}
}
{
/* -save-temps overrides -pipe, so that temp files are produced */
if (save_temps_flag)
- error ("Warning: -pipe ignored since -save-temps specified");
+ error ("Warning: -pipe ignored because -save-temps specified");
/* -time overrides -pipe because we can't get correct stats when
multiple children are running at once. */
else if (report_times)
- error ("Warning: -pipe ignored since -time specified");
+ error ("Warning: -pipe ignored because -time specified");
}
else if (argv[i][0] == '-' && argv[i][1] != 0)
{
/* Null-terminate the vector. */
switches[n_switches].args[j] = 0;
}
- else if (index (switches_need_spaces, c))
+ else if (strchr (switches_need_spaces, c))
{
/* On some systems, ld cannot handle some options without
a space. So split the option from its argument. */
char *tmp;
part1[0] = c;
part1[1] = '\0';
-
+
switches[n_switches].part1 = part1;
switches[n_switches].args
= (const char **) xmalloc (2 * sizeof (const char *));
switches[n_switches].live_cond = SWITCH_OK;
switches[n_switches].validated = 0;
- /* This is always valid, since gcc.c itself understands it. */
- if (!strcmp (p, "save-temps"))
+ switches[n_switches].ordering = 0;
+ /* These are always valid, since gcc.c itself understands it. */
+ if (!strcmp (p, "save-temps")
+ || !strcmp (p, "static-libgcc")
+ || !strcmp (p, "shared-libgcc"))
switches[n_switches].validated = 1;
- else
- {
- char ch = switches[n_switches].part1[0];
- if (ch == 'V' || ch == 'b' || ch == 'B')
- switches[n_switches].validated = 1;
- }
+ else
+ {
+ char ch = switches[n_switches].part1[0];
+ if (ch == 'V' || ch == 'b' || ch == 'B')
+ switches[n_switches].validated = 1;
+ }
n_switches++;
}
else
argv[i] = convert_filename (argv[i], 0);
#endif
- if (strcmp (argv[i], "-") != 0 && access (argv[i], R_OK) < 0)
+ if (strcmp (argv[i], "-") != 0 && access (argv[i], F_OK) < 0)
{
perror_with_name (argv[i]);
error_count++;
static int input_file_number;
size_t input_filename_length;
static int basename_length;
+static int suffixed_basename_length;
static const char *input_basename;
static const char *input_suffix;
+/* The compiler used to process the current input file. */
+static struct compiler *input_file_compiler;
+
/* These are variables used within do_spec and do_spec_1. */
/* Nonzero if an arg has been started and not yet terminated
/* Nonzero means that the input of this command is coming from a pipe. */
static int input_from_pipe;
+/* Nonnull means substitute this for any suffix when outputting a switches
+ arguments. */
+static const char *suffix_subst;
+
/* Process the spec SPEC and run the commands specified therein.
Returns 0 if the spec is successfully processed; -1 if failed. */
this_is_output_file = 0;
this_is_library_file = 0;
input_from_pipe = 0;
+ suffix_subst = NULL;
value = do_spec_1 (spec, 0, NULL_PTR);
arg_going = 1;
break;
+ case 'B':
+ obstack_grow (&obstack, input_basename, suffixed_basename_length);
+ arg_going = 1;
+ break;
+
case 'd':
delete_this_arg = 2;
break;
/* Relative directories always come from -B,
and it is better not to use them for searching
at run time. In particular, stage1 loses. */
- if (!IS_DIR_SEPARATOR (pl->prefix[0]))
+ if (!IS_ABSOLUTE_PATHNAME (pl->prefix))
continue;
#endif
/* Try subdirectory if there is one. */
{
const char *q = p;
char *buf;
- while (*p != 0 && *p != '\n') p++;
+ while (*p != 0 && *p != '\n')
+ p++;
buf = (char *) alloca (p - q + 1);
strncpy (buf, q, p - q);
buf[p - q] = 0;
return -1;
}
break;
+ case 'n':
+ /* %nfoo means report an notice with `foo' on stderr. */
+ {
+ const char *q = p;
+ char *buf;
+ while (*p != 0 && *p != '\n')
+ p++;
+ buf = (char *) alloca (p - q + 1);
+ strncpy (buf, q, p - q);
+ buf[p - q] = 0;
+ notice ("%s\n", buf);
+ if (*p)
+ p++;
+ }
+ break;
+ case 'j':
+ {
+ struct stat st;
+
+ /* If save_temps_flag is off, and the HOST_BIT_BUCKET is defined,
+ and it is not a directory, and it is writable, use it.
+ Otherwise, fall through and treat this like any other
+ temporary file. */
+
+ if ((!save_temps_flag)
+ && (stat (HOST_BIT_BUCKET, &st) == 0) && (!S_ISDIR (st.st_mode))
+ && (access (HOST_BIT_BUCKET, W_OK) == 0))
+ {
+ obstack_grow (&obstack, HOST_BIT_BUCKET,
+ strlen (HOST_BIT_BUCKET));
+ delete_this_arg = 0;
+ arg_going = 1;
+ break;
+ }
+ }
case 'g':
case 'u':
case 'U':
}
else
{
-#ifdef MKTEMP_EACH_FILE
- /* ??? This has a problem: the total number of
- values mktemp can return is limited.
- That matters for the names of object files.
- In 2.4, do something about that. */
struct temp_name *t;
int suffix_length;
const char *suffix = p;
char *saved_suffix = NULL;
- while (*p == '.' || ISALPHA ((unsigned char)*p))
+ while (*p == '.' || ISALPHA ((unsigned char) *p))
p++;
suffix_length = p - suffix;
if (p[0] == '%' && p[1] == 'O')
{
p += 2;
/* We don't support extra suffix characters after %O. */
- if (*p == '.' || ISALPHA ((unsigned char)*p))
+ if (*p == '.' || ISALPHA ((unsigned char) *p))
abort ();
if (suffix_length == 0)
suffix = OBJECT_SUFFIX;
&& t->unique == (c != 'g'))
break;
- /* Make a new association if needed. %u requires one. */
- if (t == 0 || c == 'u')
+ /* Make a new association if needed. %u and %j require one. */
+ if (t == 0 || c == 'u' || c == 'j')
{
if (t == 0)
{
obstack_grow (&obstack, t->filename, t->filename_length);
delete_this_arg = 1;
-#else
- obstack_grow (&obstack, temp_filename, temp_filename_length);
- if (c == 'u' || c == 'U')
- {
- static int unique;
- char buff[9];
- if (c == 'u')
- unique++;
- sprintf (buff, "%d", unique);
- obstack_grow (&obstack, buff, strlen (buff));
- }
-#endif
- delete_this_arg = 1;
}
arg_going = 1;
break;
break;
case 'C':
- value = do_spec_1 (cpp_spec, 0, NULL_PTR);
- if (value != 0)
- return value;
+ {
+ const char* spec
+ = (input_file_compiler->cpp_spec
+ ? input_file_compiler->cpp_spec
+ : cpp_spec);
+ value = do_spec_1 (spec, 0, NULL_PTR);
+ if (value != 0)
+ return value;
+ }
break;
case 'E':
return value;
break;
+ case 'M':
+ if (multilib_dir && strcmp (multilib_dir, ".") != 0)
+ {
+ char *p;
+ const char *q;
+ size_t len;
+
+ len = strlen (multilib_dir);
+ obstack_blank (&obstack, len + 1);
+ p = obstack_next_free (&obstack) - (len + 1);
+
+ *p++ = '_';
+ for (q = multilib_dir; *q ; ++q, ++p)
+ *p = (IS_DIR_SEPARATOR (*q) ? '_' : *q);
+ }
+ break;
+
case 'p':
{
char *x = (char *) alloca (strlen (cpp_predefines) + 1);
*x++ = *y++;
if (*y != '_'
- || (*(y+1) != '_'
- && ! ISUPPER ((unsigned char)*(y+1))))
- {
+ || (*(y + 1) != '_'
+ && ! ISUPPER ((unsigned char) *(y + 1))))
+ {
/* Stick __ at front of macro name. */
if (*y != '_')
*x++ = '_';
*x++ = *y++;
if (flag)
- {
+ {
if (x[-1] != '_')
{
if (x[-2] != '_')
y += 2;
if (*y != '_'
- || (*(y+1) != '_'
- && ! ISUPPER ((unsigned char)*(y+1))))
- {
+ || (*(y + 1) != '_'
+ && ! ISUPPER ((unsigned char) *(y + 1))))
+ {
/* Stick -D__ at front of macro name. */
*x++ = '-';
*x++ = 'D';
obstack_1grow (&obstack, '%');
break;
+ case '.':
+ {
+ unsigned len = 0;
+
+ while (p[len] && p[len] != ' ' && p[len] != '%')
+ len++;
+ suffix_subst = save_string (p - 1, len + 1);
+ p += len;
+ }
+ break;
+
case '*':
if (soft_matched_part)
{
flag = 1;
continue;
}
- else if (flag && (*y == ' ' || *y == '\t' || *y == '='
- || *y == '}' || *y == 0))
+ else if (flag
+ && (*y == ' ' || *y == '\t' || *y == '='
+ || *y == '}' || *y == 0))
{
*x++ = '_';
*x++ = '_';
flag = 0;
}
- if (*y == 0)
+ if (*y == 0)
break;
else
*x++ = *y++;
v++;
if ((*v != 0) && (*v != ' ') && (*v != '.') && (*v != '-'))
abort ();
- if (*v != 0)
- v++;
+ if (*v != 0)
+ v++;
}
/* Set Q at the next period or at the end. */
q = v;
while (ISDIGIT (*q))
q++;
- if (*q != 0 && *q != ' ' && *q != '.' && *q != '-')
+ if (*q != 0 && q > v && *q != ' ' && *q != '.' && *q != '-')
abort ();
- if (q > v)
- /* Put that part into the command. */
- obstack_grow (&obstack, v, q - v);
- else
- /* Default to "0" */
- obstack_grow (&obstack, &zeroc, 1);
+ if (q > v)
+ /* Put that part into the command. */
+ obstack_grow (&obstack, v, q - v);
+ else
+ /* Default to "0" */
+ obstack_grow (&obstack, &zeroc, 1);
arg_going = 1;
}
break;
arg_going = 1;
}
- return 0; /* End of string */
+ /* End of string. */
+ return 0;
}
/* Return 0 if we call do_spec_1 and that returns -1. */
{
const char *filter, *body = NULL, *endbody = NULL;
int pipe_p = 0;
+ int true_once = 0; /* If, in %{a|b:d}, at least one of a,b was seen. */
int negate;
int suffix;
int include_blanks = 1;
int elide_switch = 0;
+ int ordered = 0;
if (*p == '^')
{
abort ();
}
+ next_ampersand:
filter = p;
- while (*p != ':' && *p != '}' && *p != '|') p++;
+ while (*p != ':' && *p != '}' && *p != '|' && *p != '&')
+ p++;
- if (*p == '|' && pipe_p)
+ if (*p == '|' && (pipe_p || ordered))
abort ();
if (!body)
{
- if (*p != '}')
- {
+ if (*p != '}' && *p != '&')
+ {
register int count = 1;
register const char *q = p;
- while (*q++ != ':') continue;
+ while (*q++ != ':')
+ continue;
body = q;
-
+
while (count > 0)
{
if (*q == '{')
- count++;
+ count++;
else if (*q == '}')
- count--;
+ count--;
else if (*q == 0)
- abort ();
+ abort ();
q++;
}
endbody = q;
}
else
- body = p, endbody = p+1;
+ body = p, endbody = p + 1;
}
if (suffix)
{
int found = (input_suffix != 0
- && (long) strlen (input_suffix) == (long)(p - filter)
+ && (long) strlen (input_suffix) == (long) (p - filter)
&& strncmp (input_suffix, filter, p - filter) == 0);
if (body[0] == '}')
&& do_spec_1 (save_string (body, endbody-body-1), 0, NULL_PTR) < 0)
return 0;
}
- else if (p[-1] == '*' && p[0] == '}')
+ else if (p[-1] == '*' && (p[0] == '}' || p[0] == '&'))
{
/* Substitute all matching switches as separate args. */
register int i;
- --p;
+
for (i = 0; i < n_switches; i++)
- if (!strncmp (switches[i].part1, filter, p - filter)
- && check_live_switch (i, p - filter))
- give_switch (i, 0, include_blanks);
+ if (!strncmp (switches[i].part1, filter, p - 1 - filter)
+ && check_live_switch (i, p - 1 - filter))
+ {
+ if (elide_switch)
+ {
+ switches[i].live_cond = SWITCH_IGNORE;
+ switches[i].validated = 1;
+ }
+ else
+ ordered = 1, switches[i].ordering = 1;
+ }
}
else
{
do_spec_1 (string, 0, &switches[i].part1[hard_match_len]);
/* Pass any arguments this switch has. */
give_switch (i, 1, 1);
+ suffix_subst = NULL;
}
/* We didn't match. Try again. */
switches[i].live_cond = SWITCH_IGNORE;
switches[i].validated = 1;
}
+ else if (ordered || *p == '&')
+ ordered = 1, switches[i].ordering = 1;
else if (*p == '}')
- {
- give_switch (i, 0, include_blanks);
- }
+ give_switch (i, 0, include_blanks);
else
- {
- if (do_spec_1 (save_string (body, endbody - body - 1),
- 0, NULL_PTR) < 0)
- return 0;
- }
+ /* Even if many alternatives are matched, only output once. */
+ true_once = 1;
}
else if (pipe_p)
{
if (*p++ == '|')
goto next_member;
+ if (p[-1] == '&')
+ {
+ body = 0;
+ goto next_ampersand;
+ }
+
+ if (ordered)
+ {
+ int i;
+ /* Doing this set of switches later preserves their command-line
+ ordering. This is needed for e.g. -U, -D and -A. */
+ for (i = 0; i < n_switches; i++)
+ if (switches[i].ordering == 1)
+ {
+ switches[i].ordering = 0;
+ give_switch (i, 0, include_blanks);
+ }
+ }
+ /* Process the spec just once, regardless of match count. */
+ else if (true_once)
+ {
+ if (do_spec_1 (save_string (body, endbody - body - 1),
+ 0, NULL_PTR) < 0)
+ return 0;
+ }
+
return endbody;
}
\f
switch (*name)
{
case 'O':
- for (i = switchnum + 1; i < n_switches; i++)
- if (switches[i].part1[0] == 'O')
- {
- switches[switchnum].validated = 1;
- switches[switchnum].live_cond = SWITCH_FALSE;
- return 0;
- }
+ for (i = switchnum + 1; i < n_switches; i++)
+ if (switches[i].part1[0] == 'O')
+ {
+ switches[switchnum].validated = 1;
+ switches[switchnum].live_cond = SWITCH_FALSE;
+ return 0;
+ }
break;
case 'W': case 'f': case 'm':
for (i = switchnum + 1; i < n_switches; i++)
if (switches[i].part1[0] == name[0]
&& ! strcmp (&switches[i].part1[1], &name[4]))
- {
- switches[switchnum].validated = 1;
- switches[switchnum].live_cond = SWITCH_FALSE;
- return 0;
- }
+ {
+ switches[switchnum].validated = 1;
+ switches[switchnum].live_cond = SWITCH_FALSE;
+ return 0;
+ }
}
else
{
&& switches[i].part1[2] == 'o'
&& switches[i].part1[3] == '-'
&& !strcmp (&switches[i].part1[4], &name[1]))
- {
- switches[switchnum].validated = 1;
- switches[switchnum].live_cond = SWITCH_FALSE;
- return 0;
- }
+ {
+ switches[switchnum].validated = 1;
+ switches[switchnum].live_cond = SWITCH_FALSE;
+ return 0;
+ }
}
break;
}
const char **p;
for (p = switches[switchnum].args; *p; p++)
{
+ const char *arg = *p;
+
if (include_blanks)
do_spec_1 (" ", 0, NULL_PTR);
- do_spec_1 (*p, 1, NULL_PTR);
+ if (suffix_subst)
+ {
+ unsigned length = strlen (arg);
+
+ while (length-- && !IS_DIR_SEPARATOR (arg[length]))
+ if (arg[length] == '.')
+ {
+ ((char *)arg)[length] = 0;
+ break;
+ }
+ do_spec_1 (arg, 1, NULL_PTR);
+ if (!arg[length])
+ {
+ ((char *)arg)[length] = '.';
+ do_spec_1 (suffix_subst, 1, NULL_PTR);
+ }
+ }
+ else
+ do_spec_1 (arg, 1, NULL_PTR);
}
}
/* Exclude directories that the linker is known to search. */
if (linker
&& ((cp - path == 6
- && strcmp (path, concat (dir_separator_str, "lib",
+ && strcmp (path, concat (dir_separator_str, "lib",
dir_separator_str, ".", NULL_PTR)) == 0)
|| (cp - path == 10
- && strcmp (path, concat (dir_separator_str, "usr",
- dir_separator_str, "lib",
+ && strcmp (path, concat (dir_separator_str, "usr",
+ dir_separator_str, "lib",
dir_separator_str, ".", NULL_PTR)) == 0)))
return 0;
input_filename = filename;
input_filename_length = strlen (input_filename);
-
+
input_basename = input_filename;
#ifdef HAVE_DOS_BASED_FILE_SYSTEM
/* Skip drive name so 'x:foo' is handled properly. */
/* Find a suffix starting with the last period,
and set basename_length to exclude that suffix. */
basename_length = strlen (input_basename);
+ suffixed_basename_length = basename_length;
p = input_basename + basename_length;
- while (p != input_basename && *p != '.') --p;
+ while (p != input_basename && *p != '.')
+ --p;
if (*p == '.' && p != input_basename)
{
basename_length = p - input_basename;
kill (getpid (), signum);
}
-extern int main PARAMS ((int, const char **));
+extern int main PARAMS ((int, const char *const *));
int
main (argc, argv)
int argc;
- char **argv;
+ const char *const *argv;
{
- register size_t i;
- size_t j;
+ size_t i;
int value;
int linker_was_run = 0;
char *explicit_link_files;
--p;
programname = p;
+ xmalloc_set_program_name (programname);
+
+#ifdef GCC_DRIVER_HOST_INITIALIZATION
+ /* Perform host dependant initialization when needed. */
+ GCC_DRIVER_HOST_INITIALIZATION;
+#endif
+
+/* LC_CTYPE determines the character set used by the terminal so it has be set
+ to output messages correctly. */
+
#ifdef HAVE_LC_MESSAGES
+ setlocale (LC_CTYPE, "");
setlocale (LC_MESSAGES, "");
+#else
+ setlocale (LC_ALL, "");
#endif
+
(void) bindtextdomain (PACKAGE, localedir);
(void) textdomain (PACKAGE);
if (signal (SIGPIPE, SIG_IGN) != SIG_IGN)
signal (SIGPIPE, fatal_error);
#endif
+#ifdef SIGCHLD
+ /* We *MUST* set SIGCHLD to SIG_DFL so that the wait4() call will
+ receive the signal. A different setting is inheritable */
+ signal (SIGCHLD, SIG_DFL);
+#endif
argbuf_length = 10;
argbuf = (const char **) xmalloc (argbuf_length * sizeof (const char *));
q = multilib_exclusions_raw;
while ((p = *q++) != (char *) 0)
- obstack_grow (&multilib_obstack, p, strlen (p));
+ obstack_grow (&multilib_obstack, p, strlen (p));
obstack_1grow (&multilib_obstack, 0);
multilib_exclusions = obstack_finish (&multilib_obstack);
-
+
need_space = FALSE;
- for (i = 0;
- i < sizeof (multilib_defaults_raw) / sizeof (multilib_defaults_raw[0]);
- i++)
+ for (i = 0; i < ARRAY_SIZE (multilib_defaults_raw); i++)
{
if (need_space)
obstack_1grow (&multilib_obstack, ' ');
needed for collect. We use argv[0] instead of programname because
we need the complete pathname. */
obstack_init (&collect_obstack);
- obstack_grow (&collect_obstack, "COLLECT_GCC=", sizeof ("COLLECT_GCC=")-1);
- obstack_grow (&collect_obstack, argv[0], strlen (argv[0])+1);
+ obstack_grow (&collect_obstack, "COLLECT_GCC=", sizeof ("COLLECT_GCC=") - 1);
+ obstack_grow (&collect_obstack, argv[0], strlen (argv[0]) + 1);
putenv (obstack_finish (&collect_obstack));
#ifdef INIT_ENVIRONMENT
putenv (INIT_ENVIRONMENT);
#endif
- /* Choose directory for temp files. */
-
-#ifndef MKTEMP_EACH_FILE
- temp_filename = choose_temp_base ();
- temp_filename_length = strlen (temp_filename);
-#endif
-
/* Make a table of what switches there are (switches, n_switches).
Make a table of specified input files (infiles, n_infiles).
Decode switches that are handled locally. */
/* Build COLLECT_GCC_OPTIONS to have all of the options specified to
the compiler. */
obstack_grow (&collect_obstack, "COLLECT_GCC_OPTIONS=",
- sizeof ("COLLECT_GCC_OPTIONS=")-1);
+ sizeof ("COLLECT_GCC_OPTIONS=") - 1);
first_time = TRUE;
- for (i = 0; (int)i < n_switches; i++)
+ for (i = 0; (int) i < n_switches; i++)
{
- const char **args;
+ const char *const *args;
const char *p, *q;
if (!first_time)
obstack_grow (&collect_obstack, " ", 1);
first_time = FALSE;
obstack_grow (&collect_obstack, "'-", 2);
- q = switches[i].part1;
- while ((p = index (q,'\'')))
- {
- obstack_grow (&collect_obstack, q, p-q);
- obstack_grow (&collect_obstack, "'\\''", 4);
- q = ++p;
- }
- obstack_grow (&collect_obstack, q, strlen (q));
+ q = switches[i].part1;
+ while ((p = strchr (q, '\'')))
+ {
+ obstack_grow (&collect_obstack, q, p - q);
+ obstack_grow (&collect_obstack, "'\\''", 4);
+ q = ++p;
+ }
+ obstack_grow (&collect_obstack, q, strlen (q));
obstack_grow (&collect_obstack, "'", 1);
for (args = switches[i].args; args && *args; args++)
{
obstack_grow (&collect_obstack, " '", 2);
q = *args;
- while ((p = index (q,'\'')))
+ while ((p = strchr (q, '\'')))
{
- obstack_grow (&collect_obstack, q, p-q);
+ obstack_grow (&collect_obstack, q, p - q);
obstack_grow (&collect_obstack, "'\\''", 4);
q = ++p;
}
This means one element containing 0s, as a terminator. */
compilers = (struct compiler *) xmalloc (sizeof default_compilers);
- bcopy ((char *) default_compilers, (char *) compilers,
- sizeof default_compilers);
+ memcpy ((char *) compilers, (char *) default_compilers,
+ sizeof default_compilers);
n_compilers = n_default_compilers;
/* Read specs from a file if there is one. */
strcat (specs_file, "specs");
if (access (specs_file, R_OK) == 0)
read_specs (specs_file, TRUE);
-
+
/* If not cross-compiling, look for startfiles in the standard places. */
if (*cross_compile == '0')
{
-#ifdef MD_EXEC_PREFIX
- add_prefix (&exec_prefixes, md_exec_prefix, "GCC", 0, 0, NULL_PTR);
- add_prefix (&startfile_prefixes, md_exec_prefix, "GCC", 0, 0, NULL_PTR);
-#endif
+ if (*md_exec_prefix)
+ {
+ add_prefix (&exec_prefixes, md_exec_prefix, "GCC",
+ PREFIX_PRIORITY_LAST, 0, NULL_PTR);
+ add_prefix (&startfile_prefixes, md_exec_prefix, "GCC",
+ PREFIX_PRIORITY_LAST, 0, NULL_PTR);
+ }
-#ifdef MD_STARTFILE_PREFIX
- add_prefix (&startfile_prefixes, md_startfile_prefix, "GCC",
- 0, 0, NULL_PTR);
-#endif
+ if (*md_startfile_prefix)
+ add_prefix (&startfile_prefixes, md_startfile_prefix, "GCC",
+ PREFIX_PRIORITY_LAST, 0, NULL_PTR);
-#ifdef MD_STARTFILE_PREFIX_1
- add_prefix (&startfile_prefixes, md_startfile_prefix_1, "GCC",
- 0, 0, NULL_PTR);
-#endif
+ if (*md_startfile_prefix_1)
+ add_prefix (&startfile_prefixes, md_startfile_prefix_1, "GCC",
+ PREFIX_PRIORITY_LAST, 0, NULL_PTR);
/* If standard_startfile_prefix is relative, base it on
standard_exec_prefix. This lets us move the installed tree
as a unit. If GCC_EXEC_PREFIX is defined, base
standard_startfile_prefix on that as well. */
- if (IS_DIR_SEPARATOR (*standard_startfile_prefix)
- || *standard_startfile_prefix == '$'
-#ifdef HAVE_DOS_BASED_FILE_SYSTEM
- /* Check for disk name on MS-DOS-based systems. */
- || (standard_startfile_prefix[1] == ':'
- && (IS_DIR_SEPARATOR (standard_startfile_prefix[2])))
-#endif
- )
+ if (IS_ABSOLUTE_PATHNAME (standard_startfile_prefix))
add_prefix (&startfile_prefixes, standard_startfile_prefix, "BINUTILS",
- 0, 0, NULL_PTR);
+ PREFIX_PRIORITY_LAST, 0, NULL_PTR);
else
{
if (gcc_exec_prefix)
add_prefix (&startfile_prefixes,
concat (gcc_exec_prefix, machine_suffix,
standard_startfile_prefix, NULL_PTR),
- NULL_PTR, 0, 0, NULL_PTR);
+ NULL_PTR, PREFIX_PRIORITY_LAST, 0, NULL_PTR);
add_prefix (&startfile_prefixes,
concat (standard_exec_prefix,
machine_suffix,
standard_startfile_prefix, NULL_PTR),
- NULL_PTR, 0, 0, NULL_PTR);
- }
+ NULL_PTR, PREFIX_PRIORITY_LAST, 0, NULL_PTR);
+ }
add_prefix (&startfile_prefixes, standard_startfile_prefix_1,
- "BINUTILS", 0, 0, NULL_PTR);
+ "BINUTILS", PREFIX_PRIORITY_LAST, 0, NULL_PTR);
add_prefix (&startfile_prefixes, standard_startfile_prefix_2,
- "BINUTILS", 0, 0, NULL_PTR);
+ "BINUTILS", PREFIX_PRIORITY_LAST, 0, NULL_PTR);
#if 0 /* Can cause surprises, and one can use -B./ instead. */
- add_prefix (&startfile_prefixes, "./", NULL_PTR, 0, 1, NULL_PTR);
+ add_prefix (&startfile_prefixes, "./", NULL_PTR,
+ PREFIX_PRIORITY_LAST, 1, NULL_PTR);
#endif
}
else
{
- if (!IS_DIR_SEPARATOR (*standard_startfile_prefix) && gcc_exec_prefix)
+ if (!IS_ABSOLUTE_PATHNAME (standard_startfile_prefix)
+ && gcc_exec_prefix)
add_prefix (&startfile_prefixes,
concat (gcc_exec_prefix, machine_suffix,
standard_startfile_prefix, NULL_PTR),
- "BINUTILS", 0, 0, NULL_PTR);
+ "BINUTILS", PREFIX_PRIORITY_LAST, 0, NULL_PTR);
}
/* Process any user specified specs in the order given on the command
/* If we have a GCC_EXEC_PREFIX envvar, modify it for cpp's sake. */
if (gcc_exec_prefix)
{
- char * temp = (char *) xmalloc (strlen (gcc_exec_prefix)
- + strlen (spec_version)
- + strlen (spec_machine) + 3);
+ char *temp = (char *) xmalloc (strlen (gcc_exec_prefix)
+ + strlen (spec_version)
+ + strlen (spec_machine) + 3);
strcpy (temp, gcc_exec_prefix);
strcat (temp, spec_machine);
strcat (temp, dir_separator_str);
/* Warn about any switches that no pass was interested in. */
- for (i = 0; (int)i < n_switches; i++)
+ for (i = 0; (int) i < n_switches; i++)
if (! switches[i].validated)
error ("unrecognized option `-%s'", switches[i].part1);
if (print_search_dirs)
{
- printf ("install: %s%s\n", standard_exec_prefix, machine_suffix);
- printf ("programs: %s\n", build_search_list (&exec_prefixes, "", 0));
- printf ("libraries: %s\n", build_search_list (&startfile_prefixes, "", 0));
+ printf (_("install: %s%s\n"), standard_exec_prefix, machine_suffix);
+ printf (_("programs: %s\n"), build_search_list (&exec_prefixes, "", 0));
+ printf (_("libraries: %s\n"), build_search_list (&startfile_prefixes, "", 0));
return (0);
}
return (0);
}
+ if (target_help_flag)
+ {
+ /* Print if any target specific options.*/
+
+ /* We do not exit here. Instead we have created a fake input file
+ called 'target-dummy' which needs to be compiled, and we pass this
+ on to the various sub-processes, along with the --target-help
+ switch. */
+ }
+
if (print_help_list)
{
display_help ();
if (! verbose_flag)
{
- printf ("\nFor bug reporting instructions, please see:\n");
+ printf (_("\nFor bug reporting instructions, please see:\n"));
printf ("%s.\n", GCCBUGURL);
-
+
return (0);
}
called 'help-dummy' which needs to be compiled, and we pass this
on the the various sub-processes, along with the --help switch. */
}
-
+
if (verbose_flag)
{
int n;
+ notice ("Configured with: %s\n", configuration_arguments);
+
/* compiler_version is truncated at the first space when initialized
from version string, so truncate version_string at the first space
before comparing. */
explicit_link_files = xcalloc (1, n_infiles);
- for (i = 0; (int)i < n_infiles; i++)
+ for (i = 0; (int) i < n_infiles; i++)
{
- register struct compiler *cp = 0;
int this_file_error = 0;
/* Tell do_spec what to substitute for %i. */
/* Figure out which compiler from the file's suffix. */
- cp = lookup_compiler (infiles[i].name, input_filename_length,
- infiles[i].language);
-
- if (cp)
+ input_file_compiler
+ = lookup_compiler (infiles[i].name, input_filename_length,
+ infiles[i].language);
+
+ if (input_file_compiler)
{
/* Ok, we found an applicable compiler. Run its spec. */
- /* First say how much of input_filename to substitute for %b */
- int len;
- if (cp->spec[0][0] == '#')
+ if (input_file_compiler->spec[0] == '#')
error ("%s: %s compiler not installed on this system",
- input_filename, &cp->spec[0][1]);
-
- len = 0;
- for (j = 0; j < sizeof cp->spec / sizeof cp->spec[0]; j++)
- if (cp->spec[j])
- len += strlen (cp->spec[j]);
-
- {
- char *p1 = (char *) xmalloc (len + 1);
-
- len = 0;
- for (j = 0; j < sizeof cp->spec / sizeof cp->spec[0]; j++)
- if (cp->spec[j])
- {
- strcpy (p1 + len, cp->spec[j]);
- len += strlen (cp->spec[j]);
- }
-
- value = do_spec (p1);
- free (p1);
- }
+ input_filename, &input_file_compiler->spec[1]);
+ value = do_spec (input_file_compiler->spec);
if (value < 0)
this_file_error = 1;
}
{
int tmp = execution_count;
- /* We'll use ld if we can't find collect2. */
+ /* We'll use ld if we can't find collect2. */
if (! strcmp (linker_name_spec, "collect2"))
{
char *s = find_a_file (&exec_prefixes, "collect2", X_OK);
linker_was_run = (tmp != execution_count);
}
- /* Warn if a -B option was specified but the prefix was never used. */
- unused_prefix_warnings (&exec_prefixes);
- unused_prefix_warnings (&startfile_prefixes);
-
/* If options said don't run linker,
complain about input files to be given to the linker. */
if (! linker_was_run && error_count == 0)
- for (i = 0; (int)i < n_infiles; i++)
+ for (i = 0; (int) i < n_infiles; i++)
if (explicit_link_files[i])
- error ("%s: linker input file unused since linking not done",
+ error ("%s: linker input file unused because linking not done",
outfiles[i]);
/* Delete some or all of the temporary files we made. */
if (print_help_list)
{
- printf ("\nFor bug reporting instructions, please see:\n");
+ printf (("\nFor bug reporting instructions, please see:\n"));
printf ("%s\n", GCCBUGURL);
}
-
+
return (signal_count != 0 ? 2
: error_count > 0 ? (pass_exit_codes ? greatest_status : 1)
: 0);
}
#endif
-
if (cp >= compilers)
{
- if (cp->spec[0][0] == '@')
- {
- struct compiler *new;
-
- /* An alias entry maps a suffix to a language.
- Search for the language; pass 0 for NAME and LENGTH
- to avoid infinite recursion if language not found.
- Construct the new compiler spec. */
- language = cp->spec[0] + 1;
- new = (struct compiler *) xmalloc (sizeof (struct compiler));
- new->suffix = cp->suffix;
- memcpy (new->spec,
- lookup_compiler (NULL_PTR, 0, language)->spec,
- sizeof new->spec);
- return new;
- }
-
- /* A non-alias entry: return it. */
- return cp;
+ if (cp->spec[0] != '@')
+ /* A non-alias entry: return it. */
+ return cp;
+
+ /* An alias entry maps a suffix to a language.
+ Search for the language; pass 0 for NAME and LENGTH
+ to avoid infinite recursion if language not found. */
+ return lookup_compiler (NULL_PTR, 0, cp->spec + 1);
}
-
return 0;
}
\f
static char *
save_string (s, len)
- const char *s;
- int len;
+ const char *s;
+ int len;
{
register char *result = xmalloc (len + 1);
- bcopy (s, result, len);
+ memcpy (result, s, len);
result[len] = 0;
return result;
}
-static void
+void
pfatal_with_name (name)
const char *name;
{
exit (1);
}
-static void
+void
error VPARAMS ((const char *msgid, ...))
{
#ifndef ANSI_PROTOTYPES
vfprintf (stderr, _(msgid), ap);
va_end (ap);
}
-
\f
static void
validate_all_switches ()
register char c;
struct spec_list *spec;
- for (comp = compilers; comp->spec[0]; comp++)
+ for (comp = compilers; comp->spec; comp++)
{
- size_t i;
- for (i = 0; i < sizeof comp->spec / sizeof comp->spec[0] && comp->spec[i]; i++)
- {
- p = comp->spec[i];
- while ((c = *p++))
- if (c == '%' && *p == '{')
- /* We have a switch spec. */
- validate_switches (p + 1);
- }
+ p = comp->spec;
+ while ((c = *p++))
+ if (c == '%' && *p == '{')
+ /* We have a switch spec. */
+ validate_switches (p + 1);
}
/* Look through the linked list of specs read from the specs file. */
- for (spec = specs; spec ; spec = spec->next)
+ for (spec = specs; spec; spec = spec->next)
{
p = *(spec->ptr_spec);
while ((c = *p++))
register const char *p = start;
const char *filter;
register int i;
- int suffix = 0;
+ int suffix;
if (*p == '|')
++p;
+next_member:
if (*p == '!')
++p;
+ suffix = 0;
if (*p == '.')
suffix = 1, ++p;
filter = p;
- while (*p != ':' && *p != '}') p++;
+ while (*p != ':' && *p != '}' && *p != '|' && *p != '&')
+ p++;
if (suffix)
;
else if (p[-1] == '*')
{
/* Mark all matching switches as valid. */
- --p;
for (i = 0; i < n_switches; i++)
- if (!strncmp (switches[i].part1, filter, p - filter))
+ if (!strncmp (switches[i].part1, filter, p - filter - 1))
switches[i].validated = 1;
}
else
switches[i].validated = 1;
}
}
+
+ if (*p++ == '|' || p[-1] == '&')
+ goto next_member;
}
\f
/* Check whether a particular argument was used. The first time we
const char *q;
int cnt = 0;
- /* Break multilib_matches into the component strings of string and replacement
- string. */
+ /* Break multilib_matches into the component strings of string
+ and replacement string. */
for (q = multilib_matches; *q != '\0'; q++)
if (*q == ';')
cnt++;
- matches = (struct mswitchstr *) alloca ((sizeof (struct mswitchstr)) * cnt);
+ matches =
+ (struct mswitchstr *) alloca ((sizeof (struct mswitchstr)) * cnt);
i = 0;
q = multilib_matches;
while (*q != '\0')
{
mswitches[n_mswitches].str = matches[j].replace;
mswitches[n_mswitches].len = matches[j].rep_len;
- mswitches[n_mswitches].replace = (char *)0;
+ mswitches[n_mswitches].replace = (char *) 0;
mswitches[n_mswitches].rep_len = 0;
n_mswitches++;
break;
{
const char *start, *end;
- for (start = multilib_defaults; *start != '\0'; start = end+1)
+ for (start = multilib_defaults; *start != '\0'; start = end + 1)
{
while (*start == ' ' || *start == '\t')
start++;
if (*start == '\0')
break;
- for (end = start+1; *end != ' ' && *end != '\t' && *end != '\0'; end++)
+ for (end = start + 1; *end != ' ' && *end != '\t' && *end != '\0'; end++)
;
if ((end - start) == len && strncmp (p, start, len) == 0)
{
/* Ignore newlines. */
if (*p == '\n')
- {
- ++p;
- continue;
- }
+ {
+ ++p;
+ continue;
+ }
/* Check the arguments. */
ok = 1;
while (*p != ';')
- {
- if (*p == '\0')
- abort ();
-
- if (! ok)
- {
- ++p;
- continue;
- }
-
- this_arg = p;
- while (*p != ' ' && *p != ';')
- {
- if (*p == '\0')
- abort ();
- ++p;
- }
-
- if (*this_arg != '!')
- not_arg = 0;
- else
- {
- not_arg = 1;
- ++this_arg;
- }
-
+ {
+ if (*p == '\0')
+ abort ();
+
+ if (! ok)
+ {
+ ++p;
+ continue;
+ }
+
+ this_arg = p;
+ while (*p != ' ' && *p != ';')
+ {
+ if (*p == '\0')
+ abort ();
+ ++p;
+ }
+
+ if (*this_arg != '!')
+ not_arg = 0;
+ else
+ {
+ not_arg = 1;
+ ++this_arg;
+ }
+
ok = used_arg (this_arg, p - this_arg);
if (not_arg)
ok = ! ok;
- if (*p == ' ')
- ++p;
- }
+ if (*p == ' ')
+ ++p;
+ }
if (ok)
return;
if (this_path_len != 1
|| this_path[0] != '.')
{
- char * new_multilib_dir = xmalloc (this_path_len + 1);
+ char *new_multilib_dir = xmalloc (this_path_len + 1);
strncpy (new_multilib_dir, this_path, this_path_len);
new_multilib_dir[this_path_len] = '\0';
multilib_dir = new_multilib_dir;
}
++p;
- }
+ }
}
/* Print out the multiple library subdirectory selection
/* Check for matches with the multilib_exclusions. We don't bother
with the '!' in either list. If any of the exclusion rules match
all of its options with the select rule, we skip it. */
- {
- const char *e = multilib_exclusions;
- const char *this_arg;
+ {
+ const char *e = multilib_exclusions;
+ const char *this_arg;
- while (*e != '\0')
- {
- int m = 1;
- /* Ignore newlines. */
- if (*e == '\n')
- {
- ++e;
- continue;
- }
-
- /* Check the arguments. */
- while (*e != ';')
- {
- const char *q;
- int mp = 0;
-
- if (*e == '\0')
- abort ();
-
- if (! m)
- {
- ++e;
- continue;
- }
+ while (*e != '\0')
+ {
+ int m = 1;
+ /* Ignore newlines. */
+ if (*e == '\n')
+ {
+ ++e;
+ continue;
+ }
- this_arg = e;
-
- while (*e != ' ' && *e != ';')
- {
- if (*e == '\0')
- abort ();
- ++e;
- }
-
- q = p + 1;
- while (*q != ';')
- {
- const char *arg;
- int len = e - this_arg;
+ /* Check the arguments. */
+ while (*e != ';')
+ {
+ const char *q;
+ int mp = 0;
- if (*q == '\0')
- abort ();
-
- arg = q;
+ if (*e == '\0')
+ abort ();
- while (*q != ' ' && *q != ';')
- {
- if (*q == '\0')
- abort ();
- ++q;
- }
+ if (! m)
+ {
+ ++e;
+ continue;
+ }
- if (! strncmp (arg, this_arg, (len < q - arg) ? q - arg : len) ||
- default_arg (this_arg, e - this_arg))
- {
- mp = 1;
- break;
- }
+ this_arg = e;
+
+ while (*e != ' ' && *e != ';')
+ {
+ if (*e == '\0')
+ abort ();
+ ++e;
+ }
+
+ q = p + 1;
+ while (*q != ';')
+ {
+ const char *arg;
+ int len = e - this_arg;
+
+ if (*q == '\0')
+ abort ();
+
+ arg = q;
- if (*q == ' ')
+ while (*q != ' ' && *q != ';')
+ {
+ if (*q == '\0')
+ abort ();
++q;
- }
+ }
- if (! mp)
- m = 0;
+ if (! strncmp (arg, this_arg, (len < q - arg) ? q - arg : len) ||
+ default_arg (this_arg, e - this_arg))
+ {
+ mp = 1;
+ break;
+ }
- if (*e == ' ')
- ++e;
- }
-
- if (m)
- {
- skip = 1;
- break;
- }
+ if (*q == ' ')
+ ++q;
+ }
- if (*e != '\0')
- ++e;
- }
- }
+ if (! mp)
+ m = 0;
+
+ if (*e == ' ')
+ ++e;
+ }
+
+ if (m)
+ {
+ skip = 1;
+ break;
+ }
+
+ if (*e != '\0')
+ ++e;
+ }
+ }
if (! skip)
- {
- /* If this is a duplicate, skip it. */
- skip = (last_path != 0 && (unsigned int)(p - this_path) == last_path_len
- && ! strncmp (last_path, this_path, last_path_len));
+ {
+ /* If this is a duplicate, skip it. */
+ skip = (last_path != 0 && (unsigned int) (p - this_path) == last_path_len
+ && ! strncmp (last_path, this_path, last_path_len));
- last_path = this_path;
- last_path_len = p - this_path;
+ last_path = this_path;
+ last_path_len = p - this_path;
}
/* If this directory requires any default arguments, we can skip
}
}
}
-
+
putchar ('\n');
}
OSDN Git Service
