Once it knows which kind of compilation to perform, the procedure for
compilation is specified by a string called a "spec". */
+/* A Short Introduction to Adding a Command-Line Option.
+
+ Before adding a command-line option, consider if it is really
+ necessary. Each additional command-line option adds complexity and
+ is difficult to remove in subsequent versions.
+
+ In the following, consider adding the command-line argument
+ `--bar'.
+
+ 1. Each command-line option is specified in the specs file. The
+ notation is described below in the comment entitled "The Specs
+ Language". Read it.
+
+ 2. In this file, add an entry to "option_map" equating the long
+ `--' argument version and any shorter, single letter version. Read
+ the comments in the declaration of "struct option_map" for an
+ explanation. Do not omit the first `-'.
+
+ 3. Look in the "specs" file to determine which program or option
+ list should be given the argument, e.g., "cc1_options". Add the
+ appropriate syntax for the shorter option version to the
+ corresponding "const char *" entry in this file. Omit the first
+ `-' from the option. For example, use `-bar', rather than `--bar'.
+
+ 4. If the argument takes an argument, e.g., `--baz argument1',
+ modify either DEFAULT_SWITCH_TAKES_ARG or
+ DEFAULT_WORD_SWITCH_TAKES_ARG in this file. Omit the first `-'
+ from `--baz'.
+
+ 5. Document the option in this file's display_help(). If the
+ option is passed to a subprogram, modify its corresponding
+ function, e.g., cppinit.c:print_help() or toplev.c:display_help(),
+ instead.
+
+ 6. Compile and test. Make sure that your new specs file is being
+ read. For example, use a debugger to investigate the value of
+ "specs_file" in main(). */
+
#include "config.h"
#include "system.h"
#include <signal.h>
const char *, int, int, int *));
static void translate_options PARAMS ((int *, const char *const **));
static char *skip_whitespace PARAMS ((char *));
-static void record_temp_file PARAMS ((const char *, int, int));
static void delete_if_ordinary PARAMS ((const char *));
static void delete_temp_files PARAMS ((void));
static void delete_failure_queue PARAMS ((void));
static int default_arg PARAMS ((const char *, int));
static void set_multilib_dir PARAMS ((void));
static void print_multilib_info PARAMS ((void));
-static void pfatal_with_name PARAMS ((const char *)) ATTRIBUTE_NORETURN;
static void perror_with_name PARAMS ((const char *));
static void pfatal_pexecute PARAMS ((const char *, const char *))
ATTRIBUTE_NORETURN;
-static void error PARAMS ((const char *, ...))
- ATTRIBUTE_PRINTF_1;
static void notice PARAMS ((const char *, ...))
ATTRIBUTE_PRINTF_1;
static void display_help PARAMS ((void));
static void clear_args PARAMS ((void));
static void fatal_error PARAMS ((int));
static void set_input PARAMS ((const char *));
+static void init_gcc_specs PARAMS ((struct obstack *,
+ const char *,
+ const char *));
\f
-/* Specs are strings containing lines, each of which (if not blank)
+/* The Specs Language
+
+Specs are strings containing lines, each of which (if not blank)
is made up of a program name, and arguments separated by spaces.
The program name must be exact and start from root, since no path
is searched and it is unreliable to depend on the current working directory.
of a temporary file, just like %u. This temporary file is not
meant for communication between processes, but rather as a junk
disposal mechanism.
+ %.SUFFIX
+ substitutes .SUFFIX for the suffixes of a matched switch's args when
+ it is subsequently output with %*. SUFFIX is terminated by the next
+ space or %.
%d marks the argument containing or following the %d as a
temporary file name, so that that file will be deleted if CC exits
successfully. Unlike %g, this contributes no text to the argument.
and substitute the full name found.
%eSTR Print STR as an error message. STR is terminated by a newline.
Use this when inconsistent options are detected.
+ %nSTR Print STR as an notice. STR is terminated by a newline.
%x{OPTION} Accumulate an option for %X.
%X Output the accumulated linker options specified by compilations.
%Y Output the accumulated assembler options specified by compilations.
"%{C:%{!E:%eGNU C does not support -C without using -E}}\
%{std*} %{nostdinc*}\
%{C} %{v} %{I*} %{P} %{$} %I\
- %{M} %{MM} %{MD:-M -MF %b.d} %{MMD:-MM -MF %b.d} %{MF} %{MG} %{MP} %{MQ} %{MT}\
- %{M|MD|MM|MMD:%{o*:-MQ %*}}\
+ %{MD:-M -MF %W{!o: %b.d}%W{o*:%.d%*}}\
+ %{MMD:-MM -MF %W{!o: %b.d}%W{o*:%.d%*}}\
+ %{M} %{MM} %W{MF*} %{MG} %{MP} %{MQ*} %{MT*} %{M|MD|MM|MMD:%{o*:-MQ %*}}\
%{!no-gcc:-D__GNUC__=%v1 -D__GNUC_MINOR__=%v2 -D__GNUC_PATCHLEVEL__=%v3}\
%{!undef:%{!ansi:%{!std=*:%p}%{std=gnu*:%p}} %P} %{trigraphs}\
%c %{Os:-D__OPTIMIZE_SIZE__} %{O*:%{!O0:-D__OPTIMIZE__}}\
%{fshow-column} %{fno-show-column}\
%{fleading-underscore} %{fno-leading-underscore}\
%{fno-operator-names} %{ftabstop=*} %{remap}\
- %{g*} %{W*} %{w} %{pedantic*} %{H} %{d*} %C %{D*&U*&A*} %{i*} %Z %i\
- %{E:%W{o*}}%{M:%W{o*}}%{MM:%W{o*}}";
+ %{g3:-dD} %{W*} %{w} %{pedantic*} %{H} %{d*} %C %{D*&U*&A*} %{i*} %Z %i\
+ %{E:%{!M*:%W{o*}}}";
/* NB: This is shared amongst all front-ends. */
static const char *cc1_options =
%{aux-info*} %{Qn:-fno-ident} %{--help:--help}\
%{--target-help:--target-help}\
%{!fsyntax-only:%{S:%W{o*}%{!o*:-o %b.s}}}\
- %{fsyntax-only:-o %j}";
+ %{fsyntax-only:-o %j} %{-param*}";
static const char *asm_options =
"%a %Y %{c:%W{o*}%{!o*:-o %w%b%O}}%{!c:-o %d%w%u%O}";
|| !strcmp (STR, "imacros") || !strcmp (STR, "aux-info") \
|| !strcmp (STR, "idirafter") || !strcmp (STR, "iprefix") \
|| !strcmp (STR, "iwithprefix") || !strcmp (STR, "iwithprefixbefore") \
- || !strcmp (STR, "isystem") || !strcmp (STR, "specs") \
+ || !strcmp (STR, "isystem") || !strcmp (STR, "-param") \
+ || !strcmp (STR, "specs") \
|| !strcmp (STR, "MF") || !strcmp (STR, "MT") || !strcmp (STR, "MQ"))
#ifndef WORD_SWITCH_TAKES_ARG
whose names end in this suffix. */
const char *spec; /* To use this compiler, run this spec. */
+
+ const char *cpp_spec; /* If non-NULL, substitute this spec
+ for `%C', rather than the usual
+ cpp_spec. */
};
/* Pointer to a vector of `struct compiler' that gives the spec for
were not present when we built the driver, we will hit these copies
and be given a more meaningful error than "file not used since
linking is not done". */
- {".m", "#Objective-C"}, {".mi", "#Objective-C"},
- {".cc", "#C++"}, {".cxx", "#C++"}, {".cpp", "#C++"}, {".cp", "#C++"},
- {".c++", "#C++"}, {".C", "#C++"}, {".ii", "#C++"},
- {".ads", "#Ada"}, {".adb", "#Ada"}, {".ada", "#Ada"},
- {".f", "#Fortran"}, {".for", "#Fortran"}, {".fpp", "#Fortran"},
- {".F", "#Fortran"}, {".FOR", "#Fortran"}, {".FPP", "#Fortran"},
- {".r", "#Ratfor"},
- {".p", "#Pascal"}, {".pas", "#Pascal"},
- {".ch", "#Chill"}, {".chi", "#Chill"},
- {".java", "#Java"}, {".class", "#Java"},
- {".zip", "#Java"}, {".jar", "#Java"},
+ {".m", "#Objective-C", 0}, {".mi", "#Objective-C", 0},
+ {".cc", "#C++", 0}, {".cxx", "#C++", 0}, {".cpp", "#C++", 0},
+ {".cp", "#C++", 0}, {".c++", "#C++", 0}, {".C", "#C++", 0},
+ {".ii", "#C++", 0},
+ {".ads", "#Ada", 0}, {".adb", "#Ada", 0}, {".ada", "#Ada", 0},
+ {".f", "#Fortran", 0}, {".for", "#Fortran", 0}, {".fpp", "#Fortran", 0},
+ {".F", "#Fortran", 0}, {".FOR", "#Fortran", 0}, {".FPP", "#Fortran", 0},
+ {".r", "#Ratfor", 0},
+ {".p", "#Pascal", 0}, {".pas", "#Pascal", 0},
+ {".ch", "#Chill", 0}, {".chi", "#Chill", 0},
+ {".java", "#Java", 0}, {".class", "#Java", 0},
+ {".zip", "#Java", 0}, {".jar", "#Java", 0},
/* Next come the entries for C. */
- {".c", "@c"},
+ {".c", "@c", 0},
{"@c",
/* cc1 has an integrated ISO C preprocessor. We should invoke the
external preprocessor if -save-temps or -traditional is given. */
cc1 -fpreprocessed %{!pipe:%g.i} %(cc1_options)}\
%{!traditional:%{!ftraditional:%{!traditional-cpp:\
cc1 -lang-c %{ansi:-std=c89} %(cpp_options) %(cc1_options)}}}}\
- %{!fsyntax-only:%(invoke_as)}}}}"},
+ %{!fsyntax-only:%(invoke_as)}}}}", 0},
{"-",
"%{!E:%e-E required when input is from standard input}\
- %(trad_capable_cpp) -lang-c %{ansi:-std=c89} %(cpp_options)"},
- {".h", "@c-header"},
+ %(trad_capable_cpp) -lang-c %{ansi:-std=c89} %(cpp_options)", 0},
+ {".h", "@c-header", 0},
{"@c-header",
"%{!E:%eCompilation of header file requested} \
- %(trad_capable_cpp) -lang-c %{ansi:-std=c89} %(cpp_options)"},
- {".i", "@cpp-output"},
+ %(trad_capable_cpp) -lang-c %{ansi:-std=c89} %(cpp_options)", 0},
+ {".i", "@cpp-output", 0},
{"@cpp-output",
- "%{!M:%{!MM:%{!E:cc1 -fpreprocessed %i %(cc1_options) %{!fsyntax-only:%(invoke_as)}}}}"},
- {".s", "@assembler"},
+ "%{!M:%{!MM:%{!E:cc1 -fpreprocessed %i %(cc1_options) %{!fsyntax-only:%(invoke_as)}}}}", 0},
+ {".s", "@assembler", 0},
{"@assembler",
- "%{!M:%{!MM:%{!E:%{!S:as %(asm_options) %i %A }}}}"},
- {".S", "@assembler-with-cpp"},
+ "%{!M:%{!MM:%{!E:%{!S:as %(asm_options) %i %A }}}}", 0},
+ {".S", "@assembler-with-cpp", 0},
{"@assembler-with-cpp",
"%(trad_capable_cpp) -lang-asm %(cpp_options)\
- %{!M:%{!MM:%{!E:%(invoke_as)}}}"},
+ %{!M:%{!MM:%{!E:%(invoke_as)}}}", 0},
#include "specs.h"
/* Mark end of table */
- {0, 0}
+ {0, 0, 0}
};
/* Number of elements in default_compilers, not counting the terminator. */
{"--optimize", "-O", "oj"},
{"--output", "-o", "a"},
{"--output-class-directory", "-foutput-class-dir=", "ja"},
+ {"--param", "--param", "a"},
{"--pedantic", "-pedantic", 0},
{"--pedantic-errors", "-pedantic-errors", 0},
{"--pipe", "-pipe", 0},
static struct spec_list *specs = (struct spec_list *) 0;
\f
+/* Add appropriate libgcc specs to OBSTACK, taking into account
+ various permutations of -shared-libgcc, -shared, and such. */
+
+static void
+init_gcc_specs (obstack, shared_name, static_name)
+ struct obstack *obstack;
+ const char *shared_name;
+ const char *static_name;
+{
+ char buffer[128];
+
+ /* If we see -shared-libgcc, then use the shared version. */
+ sprintf (buffer, "%%{shared-libgcc:%s}", shared_name);
+ obstack_grow (obstack, buffer, strlen (buffer));
+ /* If we see -static-libgcc, then use the shared version. */
+ sprintf (buffer, "%%{static-libgcc:%s}", static_name);
+ obstack_grow (obstack, buffer, strlen (buffer));
+ /* Otherwise, if we see -shared, then use the shared version. */
+ sprintf (buffer,
+ "%%{!shared-libgcc:%%{!static-libgcc:%%{shared:%s}}}",
+ shared_name);
+ obstack_grow (obstack, buffer, strlen (buffer));
+ /* Otherwise, use the static version. */
+ sprintf (buffer,
+ "%%{!shared-libgcc:%%{!static-libgcc:%%{!shared:%s}}}",
+ static_name);
+ obstack_grow (obstack, buffer, strlen (buffer));
+}
+
/* Initialize the specs lookup routines. */
static void
when given the proper command line arguments. */
while (*p)
{
- const char *r;
if (in_sep && *p == '-' && strncmp (p, "-lgcc", 5) == 0)
{
+ init_gcc_specs (&obstack,
#ifdef NO_SHARED_LIBGCC_MULTILIB
- r = "%{shared-libgcc:-lgcc_s}%{!shared-libgcc:-lgcc}";
+ "-lgcc_s"
#else
- r = "%{shared-libgcc:-lgcc_s%M}%{!shared-libgcc:-lgcc}";
+ "-lgcc_s%M"
#endif
- obstack_grow (&obstack, r, strlen(r));
+ ,
+ "-lgcc");
p += 5;
in_sep = 0;
}
{
/* Ug. We don't know shared library extensions. Hope that
systems that use this form don't do shared libraries. */
+ init_gcc_specs (&obstack,
#ifdef NO_SHARED_LIBGCC_MULTILIB
- r = "%{shared-libgcc:-lgcc_s}%{!shared-libgcc:libgcc.a%s}";
+ "-lgcc_s"
#else
- r = "%{shared-libgcc:-lgcc_s%M}%{!shared-libgcc:libgcc.a%s}";
+ "-lgcc_s%M"
#endif
- obstack_grow (&obstack, r, strlen(r));
+ ,
+ "libgcc.a%s");
p += 10;
in_sep = 0;
}
FAIL_DELETE nonzero means delete it if a compilation step fails;
otherwise delete it in any case. */
-static void
+void
record_temp_file (filename, always_delete, fail_delete)
const char *filename;
int always_delete;
}
#endif
-#ifdef HAVE_EXECUTABLE_SUFFIX
+#if defined(HAVE_EXECUTABLE_SUFFIX) && !defined(NO_AUTO_EXE_SUFFIX)
/* If there is no filetype, make it the executable suffix (which includes
the "."). But don't get confused if we have just "-o". */
if (! do_exe || EXECUTABLE_SUFFIX[0] == 0 || (len == 2 && name[0] == '-'))
"), stdout);
printf (_("\
-\nOptions starting with -g, -f, -m, -O or -W are automatically passed on to\n\
-the various sub-processes invoked by %s. In order to pass other options\n\
-on to these processes the -W<letter> options must be used.\n\
+\nOptions starting with -g, -f, -m, -O, -W, or --param are automatically\n\
+ passed on to the various sub-processes invoked by %s. In order to pass\n\
+ other options on to these processes the -W<letter> options must be used.\n\
"), programname);
/* The rest of the options are displayed by invocations of the various
switches[n_switches].live_cond = SWITCH_OK;
switches[n_switches].validated = 0;
+ switches[n_switches].ordering = 0;
/* These are always valid, since gcc.c itself understands it. */
if (!strcmp (p, "save-temps")
|| !strcmp (p, "static-libgcc")
static const char *input_basename;
static const char *input_suffix;
+/* The compiler used to process the current input file. */
+static struct compiler *input_file_compiler;
+
/* These are variables used within do_spec and do_spec_1. */
/* Nonzero if an arg has been started and not yet terminated
/* Nonzero means that the input of this command is coming from a pipe. */
static int input_from_pipe;
+/* Nonnull means substitute this for any suffix when outputting a switches
+ arguments. */
+static const char *suffix_subst;
+
/* Process the spec SPEC and run the commands specified therein.
Returns 0 if the spec is successfully processed; -1 if failed. */
this_is_output_file = 0;
this_is_library_file = 0;
input_from_pipe = 0;
+ suffix_subst = NULL;
value = do_spec_1 (spec, 0, NULL_PTR);
return -1;
}
break;
+ case 'n':
+ /* %nfoo means report an notice with `foo' on stderr. */
+ {
+ const char *q = p;
+ char *buf;
+ while (*p != 0 && *p != '\n')
+ p++;
+ buf = (char *) alloca (p - q + 1);
+ strncpy (buf, q, p - q);
+ buf[p - q] = 0;
+ notice ("%s\n", buf);
+ if (*p)
+ p++;
+ }
+ break;
case 'j':
{
break;
case 'C':
- value = do_spec_1 (cpp_spec, 0, NULL_PTR);
- if (value != 0)
- return value;
+ {
+ const char* spec
+ = (input_file_compiler->cpp_spec
+ ? input_file_compiler->cpp_spec
+ : cpp_spec);
+ value = do_spec_1 (spec, 0, NULL_PTR);
+ if (value != 0)
+ return value;
+ }
break;
case 'E':
len = strlen (multilib_dir);
obstack_blank (&obstack, len + 1);
- p = obstack_next_free (&obstack) - len;
+ p = obstack_next_free (&obstack) - (len + 1);
*p++ = '_';
for (q = multilib_dir; *q ; ++q, ++p)
obstack_1grow (&obstack, '%');
break;
+ case '.':
+ {
+ unsigned len = 0;
+
+ while (p[len] && p[len] != ' ' && p[len] != '%')
+ len++;
+ suffix_subst = save_string (p - 1, len + 1);
+ p += len;
+ }
+ break;
+
case '*':
if (soft_matched_part)
{
do_spec_1 (string, 0, &switches[i].part1[hard_match_len]);
/* Pass any arguments this switch has. */
give_switch (i, 1, 1);
+ suffix_subst = NULL;
}
/* We didn't match. Try again. */
const char **p;
for (p = switches[switchnum].args; *p; p++)
{
+ const char *arg = *p;
+
if (include_blanks)
do_spec_1 (" ", 0, NULL_PTR);
- do_spec_1 (*p, 1, NULL_PTR);
+ if (suffix_subst)
+ {
+ unsigned length = strlen (arg);
+
+ while (length-- && !IS_DIR_SEPARATOR (arg[length]))
+ if (arg[length] == '.')
+ {
+ ((char *)arg)[length] = 0;
+ break;
+ }
+ do_spec_1 (arg, 1, NULL_PTR);
+ if (!arg[length])
+ {
+ ((char *)arg)[length] = '.';
+ do_spec_1 (suffix_subst, 1, NULL_PTR);
+ }
+ }
+ else
+ do_spec_1 (arg, 1, NULL_PTR);
}
}
if (signal (SIGPIPE, SIG_IGN) != SIG_IGN)
signal (SIGPIPE, fatal_error);
#endif
+ /* We *MUST* set SIGCHLD to SIG_DFL so that the wait4() call will
+ receive the signal. A different setting is inheritable */
+ signal (SIGCHLD, SIG_DFL);
argbuf_length = 10;
argbuf = (const char **) xmalloc (argbuf_length * sizeof (const char *));
for (i = 0; (int) i < n_infiles; i++)
{
- register struct compiler *cp = 0;
int this_file_error = 0;
/* Tell do_spec what to substitute for %i. */
/* Figure out which compiler from the file's suffix. */
- cp = lookup_compiler (infiles[i].name, input_filename_length,
- infiles[i].language);
-
- if (cp)
+ input_file_compiler
+ = lookup_compiler (infiles[i].name, input_filename_length,
+ infiles[i].language);
+
+ if (input_file_compiler)
{
/* Ok, we found an applicable compiler. Run its spec. */
- if (cp->spec[0] == '#')
+ if (input_file_compiler->spec[0] == '#')
error ("%s: %s compiler not installed on this system",
- input_filename, &cp->spec[1]);
- value = do_spec (cp->spec);
+ input_filename, &input_file_compiler->spec[1]);
+ value = do_spec (input_file_compiler->spec);
if (value < 0)
this_file_error = 1;
}
return result;
}
-static void
+void
pfatal_with_name (name)
const char *name;
{
exit (1);
}
-static void
+void
error VPARAMS ((const char *msgid, ...))
{
#ifndef ANSI_PROTOTYPES
OSDN Git Service
