@c Copyright (C) 1988, 1989, 1992, 1993, 1994, 1996, 1998, 1999, 2000, 2001,
-@c 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+@c 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+@c Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
* Example:: An explained example of a @code{define_insn} pattern.
* RTL Template:: The RTL template defines what insns match a pattern.
* Output Template:: The output template says how to make assembler code
- from such an insn.
+ from such an insn.
* Output Statement:: For more generality, write C code to output
- the assembler code.
+ the assembler code.
* Predicates:: Controlling what kinds of operands can be used
- for an insn.
+ for an insn.
* Constraints:: Fine-tuning operand selection.
* Standard Names:: Names mark patterns to use for code generation.
* Pattern Ordering:: When the order of patterns makes a difference.
* Looping Patterns:: How to define patterns for special looping insns.
* Insn Canonicalizations::Canonicalization of Instructions
* Expander Definitions::Generating a sequence of several RTL insns
- for a standard operation.
+ for a standard operation.
* Insn Splitting:: Splitting Instructions into Multiple Instructions.
-* Including Patterns:: Including Patterns in Machine Descriptions.
+* Including Patterns:: Including Patterns in Machine Descriptions.
* Peephole Definitions::Defining machine-specific peephole optimizations.
* Insn Attributes:: Specifying the value of attributes for generated insns.
* Conditional Execution::Generating @code{define_insn} patterns for
- predication.
+ predication.
* Constant Definitions::Defining symbolic constants that can be used in the
md file.
-* Macros:: Using macros to generate patterns from a template.
+* Iterators:: Using iterators to generate patterns from a template.
@end menu
@node Overview
instructs the compiler to first split the insn, and then output the
resulting instructions separately. This helps eliminate redundancy in the
output templates. If you have a @code{define_insn} that needs to emit
-multiple assembler instructions, and there is an matching @code{define_split}
+multiple assembler instructions, and there is a matching @code{define_split}
already defined, then you can simply use @code{#} as the output template
instead of writing an output template that emits the multiple assembler
instructions.
@end defun
@noindent
-Finally, there is one generic operator predicate.
+Finally, there are two generic operator predicates.
@defun comparison_operator
This predicate matches any expression which performs an arithmetic
expression code.
@end defun
+@defun ordered_comparison_operator
+This predicate matches any expression which performs an arithmetic
+comparison in @var{mode} and whose expression code is valid for integer
+modes; that is, the expression code will be one of @code{eq}, @code{ne},
+@code{lt}, @code{ltu}, @code{le}, @code{leu}, @code{gt}, @code{gtu},
+@code{ge}, @code{geu}.
+@end defun
+
@node Defining Predicates
@subsection Defining Machine-Specific Predicates
@cindex defining predicates
* Multi-Alternative:: When an insn has two alternative constraint-patterns.
* Class Preferences:: Constraints guide which hard register to put things in.
* Modifiers:: More precise control over effects of constraints.
+* Disable Insn Alternatives:: Disable insn alternatives using the @code{enabled} attribute.
* Machine Constraints:: Existing constraints for some particular machines.
* Define Constraints:: How to define machine-specific constraints.
* C Constraint Interface:: How to test constraints from C code.
@item @samp{m}
A memory operand is allowed, with any kind of address that the machine
supports in general.
+Note that the letter used for the general memory constraint can be
+re-defined by a back end using the @code{TARGET_MEM_CONSTRAINT} macro.
@cindex offsettable address
@cindex @samp{o} in constraint
constraints that aren't. The compiler source file mentioned in the
table heading for each architecture is the definitive reference for
the meanings of that architecture's constraints.
-
+
@table @emph
@item ARM family---@file{config/arm/arm.h}
@table @code
@item G
A floating point constant 0.0
+
+@item R
+Integer constant in the range @minus{}6 @dots{} 5.
+
+@item Q
+A memory address based on Y or Z pointer with displacement.
@end table
@item CRX Architecture---@file{config/crx/crx.h}
Constant that fits in 5 bits
@item L
-Constant that is one of -1, 4, -4, 7, 8, 12, 16, 20, 32, 48
+Constant that is one of @minus{}1, 4, @minus{}4, 7, 8, 12, 16, 20, 32, 48
@item G
Floating point constant that is legal for store immediate
@end table
+@item Hewlett-Packard PA-RISC---@file{config/pa/pa.h}
+@table @code
+@item a
+General register 1
+
+@item f
+Floating point register
+
+@item q
+Shift amount register
+
+@item x
+Floating point register (deprecated)
+
+@item y
+Upper floating point register (32-bit), floating point register (64-bit)
+
+@item Z
+Any register
+
+@item I
+Signed 11-bit integer constant
+
+@item J
+Signed 14-bit integer constant
+
+@item K
+Integer constant that can be deposited with a @code{zdepi} instruction
+
+@item L
+Signed 5-bit integer constant
+
+@item M
+Integer constant 0
+
+@item N
+Integer constant that can be loaded with a @code{ldil} instruction
+
+@item O
+Integer constant whose value plus one is a power of 2
+
+@item P
+Integer constant that can be used for @code{and} operations in @code{depi}
+and @code{extru} instructions
+
+@item S
+Integer constant 31
+
+@item U
+Integer constant 63
+
+@item G
+Floating-point constant 0.0
+
+@item A
+A @code{lo_sum} data-linkage-table memory operand
+
+@item Q
+A memory operand that can be used as the destination operand of an
+integer store instruction
+
+@item R
+A scaled or unscaled indexed memory operand
+
+@item T
+A memory operand for floating-point loads and stores
+
+@item W
+A register indirect memory operand
+@end table
+
+@item picoChip family---@file{picochip.h}
+@table @code
+@item k
+Stack register.
+
+@item f
+Pointer register. A register which can be used to access memory without
+supplying an offset. Any other register can be used to access memory,
+but will need a constant offset. In the case of the offset being zero,
+it is more efficient to use a pointer register, since this reduces code
+size.
+
+@item t
+A twin register. A register which may be paired with an adjacent
+register to create a 32-bit register.
+
+@item a
+Any absolute memory address (e.g., symbolic constant, symbolic
+constant + offset).
+
+@item I
+4-bit signed integer.
+
+@item J
+4-bit unsigned integer.
+
+@item K
+8-bit signed integer.
+
+@item M
+Any constant whose absolute value is no greater than 4-bits.
+
+@item N
+10-bit signed integer
+
+@item O
+16-bit signed integer.
+
+@end table
+
@item PowerPC and IBM RS6000---@file{config/rs6000/rs6000.h}
@table @code
@item b
Address base register
+@item d
+Floating point register (containing 64-bit value)
+
@item f
-Floating point register
+Floating point register (containing 32-bit value)
@item v
-Vector register
+Altivec vector register
+
+@item wd
+VSX vector register to hold vector double data
+
+@item wf
+VSX vector register to hold vector float data
+
+@item ws
+VSX vector register to hold scalar float data
+
+@item wa
+Any VSX register
@item h
@samp{MQ}, @samp{CTR}, or @samp{LINK} register
Floating point constant that can be loaded into a register with one
instruction per word
+@item H
+Integer/Floating point constant that can be loaded into a register using
+three instructions
+
+@item m
+Memory operand. Note that on PowerPC targets, @code{m} can include
+addresses that update the base register. It is therefore only safe
+to use @samp{m} in an @code{asm} statement if that @code{asm} statement
+accesses the operand exactly once. The @code{asm} statement must also
+use @samp{%U@var{<opno>}} as a placeholder for the ``update'' flag in the
+corresponding load or store instruction. For example:
+
+@smallexample
+asm ("st%U0 %1,%0" : "=m" (mem) : "r" (val));
+@end smallexample
+
+is correct but:
+
+@smallexample
+asm ("st %1,%0" : "=m" (mem) : "r" (val));
+@end smallexample
+
+is not. Use @code{es} rather than @code{m} if you don't want the
+base register to be updated.
+
+@item es
+A ``stable'' memory operand; that is, one which does not include any
+automodification of the base register. Unlike @samp{m}, this constraint
+can be used in @code{asm} statements that might access the operand
+several times, or that might not access it at all.
+
@item Q
-Memory operand that is an offset from a register (@samp{m} is preferable
-for @code{asm} statements)
+Memory operand that is an offset from a register (it is usually better
+to use @samp{m} or @samp{es} in @code{asm} statements)
+
+@item Z
+Memory operand that is an indexed or indirect from a register (it is
+usually better to use @samp{m} or @samp{es} in @code{asm} statements)
@item R
AIX TOC entry
+@item a
+Address operand that is an indexed or indirect from a register (@samp{p} is
+preferable for @code{asm} statements)
+
@item S
Constant suitable as a 64-bit mask operand
@item U
System V Release 4 small data area reference
-@end table
-@item MorphoTech family---@file{config/mt/mt.h}
-@table @code
-@item I
-Constant for an arithmetic insn (16-bit signed integer).
-
-@item J
-The constant 0.
-
-@item K
-Constant for a logical insn (16-bit zero-extended integer).
-
-@item L
-A constant that can be loaded with @code{lui} (i.e.@: the bottom 16
-bits are zero).
-
-@item M
-A constant that takes two words to load (i.e.@: not matched by
-@code{I}, @code{K}, or @code{L}).
+@item t
+AND masks that can be performed by two rldic@{l, r@} instructions
-@item N
-Negative 16-bit constants other than -65536.
+@item W
+Vector constant that does not require memory
-@item O
-A 15-bit signed integer constant.
+@item j
+Vector constant that is all zeros.
-@item P
-A positive 16-bit constant.
@end table
@item Intel 386---@file{config/i386/constraints.md}
@item x
Any SSE register.
+@item Yz
+First SSE register (@code{%xmm0}).
+
@ifset INTERNALS
-@item Y
-Any SSE2 register.
+@item Y2
+Any SSE register, when SSE2 is enabled.
+
+@item Yi
+Any SSE register, when SSE2 and inter-unit moves are enabled.
+
+@item Ym
+Any MMX register, when inter-unit moves are enabled.
@end ifset
@item I
@end table
-@item Blackfin family---@file{config/bfin/bfin.h}
+@item Blackfin family---@file{config/bfin/constraints.md}
@table @code
@item a
P register
@item z
A call clobbered P register.
+@item q@var{n}
+A single register. If @var{n} is in the range 0 to 7, the corresponding D
+register. If it is @code{A}, then the register P0.
+
@item D
Even-numbered D register
Any register except accumulators or CC.
@item Ksh
-Signed 16 bit integer (in the range -32768 to 32767)
+Signed 16 bit integer (in the range @minus{}32768 to 32767)
@item Kuh
Unsigned 16 bit integer (in the range 0 to 65535)
@item Ks7
-Signed 7 bit integer (in the range -64 to 63)
+Signed 7 bit integer (in the range @minus{}64 to 63)
@item Ku7
Unsigned 7 bit integer (in the range 0 to 127)
Unsigned 5 bit integer (in the range 0 to 31)
@item Ks4
-Signed 4 bit integer (in the range -8 to 7)
+Signed 4 bit integer (in the range @minus{}8 to 7)
@item Ks3
-Signed 3 bit integer (in the range -3 to 4)
+Signed 3 bit integer (in the range @minus{}3 to 4)
@item Ku3
Unsigned 3 bit integer (in the range 0 to 7)
@item P@var{n}
Constant @var{n}, where @var{n} is a single-digit constant in the range 0 to 4.
+@item PA
+An integer equal to one of the MACFLAG_XXX constants that is suitable for
+use with either accumulator.
+
+@item PB
+An integer equal to one of the MACFLAG_XXX constants that is suitable for
+use only with accumulator A1.
+
@item M1
Constant 255.
Used to match function return values.
@item Is3
--8 @dots{} 7
+@minus{}8 @dots{} 7
@item IS1
--128 @dots{} 127
+@minus{}128 @dots{} 127
@item IS2
--32768 @dots{} 32767
+@minus{}32768 @dots{} 32767
@item IU2
0 @dots{} 65535
@item In4
--8 @dots{} -1 or 1 @dots{} 8
+@minus{}8 @dots{} @minus{}1 or 1 @dots{} 8
@item In5
--16 @dots{} -1 or 1 @dots{} 16
+@minus{}16 @dots{} @minus{}1 or 1 @dots{} 16
@item In6
--32 @dots{} -1 or 1 @dots{} 32
+@minus{}32 @dots{} @minus{}1 or 1 @dots{} 32
@item IM2
--65536 @dots{} -1
+@minus{}65536 @dots{} @minus{}1
@item Ilb
An 8 bit value with exactly one bit set.
$r1h
@end table
+@item MeP---@file{config/mep/constraints.md}
+@table @code
+
+@item a
+The $sp register.
+
+@item b
+The $tp register.
+
+@item c
+Any control register.
+
+@item d
+Either the $hi or the $lo register.
+
+@item em
+Coprocessor registers that can be directly loaded ($c0-$c15).
+
+@item ex
+Coprocessor registers that can be moved to each other.
+
+@item er
+Coprocessor registers that can be moved to core registers.
+
+@item h
+The $hi register.
+
+@item j
+The $rpc register.
+
+@item l
+The $lo register.
+
+@item t
+Registers which can be used in $tp-relative addressing.
+
+@item v
+The $gp register.
+
+@item x
+The coprocessor registers.
+
+@item y
+The coprocessor control registers.
+
+@item z
+The $0 register.
+
+@item A
+User-defined register set A.
+
+@item B
+User-defined register set B.
+
+@item C
+User-defined register set C.
+
+@item D
+User-defined register set D.
+
+@item I
+Offsets for $gp-rel addressing.
+
+@item J
+Constants that can be used directly with boolean insns.
+
+@item K
+Constants that can be moved directly to registers.
+
+@item L
+Small constants that can be added to registers.
+
+@item M
+Long shift counts.
+
+@item N
+Small constants that can be compared to registers.
+
+@item O
+Constants that can be loaded into the top half of registers.
+
+@item S
+Signed 8-bit immediates.
+
+@item T
+Symbols encoded for $tp-rel or $gp-rel addressing.
+
+@item U
+Non-constant addresses for loading/saving coprocessor registers.
+
+@item W
+The top half of a symbol's value.
+
+@item Y
+A register indirect address without offset.
+
+@item Z
+Symbolic references to the control bus.
+
+
+
+@end table
+
@item MIPS---@file{config/mips/constraints.md}
@table @code
@item d
A floating-point register (if available).
@item h
-The @code{hi} register.
+Formerly the @code{hi} register. This constraint is no longer supported.
@item l
-The @code{lo} register.
+The @code{lo} register. Use this register to store values that are
+no bigger than a word.
@item x
-The @code{hi} and @code{lo} registers.
+The concatenated @code{hi} and @code{lo} registers. Use this register
+to store doubleword values.
@item c
A register suitable for use in an indirect jump. This will always be
@code{$25} for @option{-mabicalls}.
+@item v
+Register @code{$3}. Do not use this constraint in new code;
+it is retained only for compatibility with glibc.
+
@item y
Equivalent to @code{r}; retained for backwards compatibility.
or @code{ori}.
@item N
-A constant in the range -65535 to -1 (inclusive).
+A constant in the range @minus{}65535 to @minus{}1 (inclusive).
@item O
A signed 15-bit constant.
An address that can be used in a non-macro load or store.
@end table
-@item Motorola 680x0---@file{config/m68k/m68k.h}
+@item Motorola 680x0---@file{config/m68k/constraints.md}
@table @code
@item a
Address register
@item M
Signed number whose magnitude is greater than 0x100
+@item N
+Range 24 to 31, rotatert:SI 8 to 1 expressed as rotate
+
+@item O
+16 (for rotate using swap)
+
+@item P
+Range 8 to 15, rotatert:HI 8 to 1 expressed as rotate
+
+@item R
+Numbers that mov3q can handle
+
@item G
Floating point constant that is not a 68881 constant
+
+@item S
+Operands that satisfy 'm' when -mpcrel is in effect
+
+@item T
+Operands that satisfy 's' when -mpcrel is not in effect
+
+@item Q
+Address register indirect addressing mode
+
+@item U
+Register offset addressing
+
+@item W
+const_call_operand
+
+@item Cs
+symbol_ref or const
+
+@item Ci
+const_int
+
+@item C0
+const_int 0
+
+@item Cj
+Range of signed numbers that don't fit in 16 bits
+
+@item Cmvq
+Integers valid for mvq
+
+@item Capsw
+Integers valid for a moveq followed by a swap
+
+@item Cmvz
+Integers valid for mvz
+
+@item Cmvs
+Integers valid for mvs
+
+@item Ap
+push_operand
+
+@item Ac
+Non-register operands allowed in clr
+
@end table
@item Motorola 68HC11 & 68HC12 families---@file{config/m68hc11/m68hc11.h}
@end table
+@item Moxie---@file{config/moxie/constraints.md}
+@table @code
+@item A
+An absolute address
+
+@item B
+An offset address
+
+@item W
+A register indirect memory operand
+
+@item I
+A constant in the range of 0 to 255.
+
+@item N
+A constant in the range of 0 to @minus{}255.
+
+@end table
+
+@item RX---@file{config/rx/constraints.md}
+@table @code
+@item Q
+An address which does not involve register indirect addressing or
+pre/post increment/decrement addressing.
+
+@item Symbol
+A symbol reference.
+
+@item Int08
+A constant in the range @minus{}256 to 255, inclusive.
+
+@item Sint08
+A constant in the range @minus{}128 to 127, inclusive.
+
+@item Sint16
+A constant in the range @minus{}32768 to 32767, inclusive.
+
+@item Sint24
+A constant in the range @minus{}8388608 to 8388607, inclusive.
+
+@item Uint04
+A constant in the range 0 to 15, inclusive.
+
+@end table
+
@need 1000
@item SPARC---@file{config/sparc/sparc.h}
@table @code
@item h
64-bit global or out register for the SPARC-V8+ architecture.
+@item D
+A vector constant
+
@item I
Signed 13-bit constant
@end table
-@item TMS320C3x/C4x---@file{config/c4x/c4x.h}
+@item SPU---@file{config/spu/spu.h}
@table @code
@item a
-Auxiliary (address) register (ar0-ar7)
-
-@item b
-Stack pointer register (sp)
+An immediate which can be loaded with the il/ila/ilh/ilhu instructions. const_int is treated as a 64 bit value.
@item c
-Standard (32-bit) precision integer register
+An immediate for and/xor/or instructions. const_int is treated as a 64 bit value.
-@item f
-Extended (40-bit) precision register (r0-r11)
-
-@item k
-Block count register (bk)
-
-@item q
-Extended (40-bit) precision low register (r0-r7)
-
-@item t
-Extended (40-bit) precision register (r0-r1)
-
-@item u
-Extended (40-bit) precision register (r2-r3)
-
-@item v
-Repeat count register (rc)
+@item d
+An immediate for the @code{iohl} instruction. const_int is treated as a 64 bit value.
-@item x
-Index register (ir0-ir1)
+@item f
+An immediate which can be loaded with @code{fsmbi}.
-@item y
-Status (condition code) register (st)
+@item A
+An immediate which can be loaded with the il/ila/ilh/ilhu instructions. const_int is treated as a 32 bit value.
-@item z
-Data page register (dp)
+@item B
+An immediate for most arithmetic instructions. const_int is treated as a 32 bit value.
-@item G
-Floating-point zero
+@item C
+An immediate for and/xor/or instructions. const_int is treated as a 32 bit value.
-@item H
-Immediate 16-bit floating-point constant
+@item D
+An immediate for the @code{iohl} instruction. const_int is treated as a 32 bit value.
@item I
-Signed 16-bit constant
+A constant in the range [@minus{}64, 63] for shift/rotate instructions.
@item J
-Signed 8-bit constant
+An unsigned 7-bit constant for conversion/nop/channel instructions.
@item K
-Signed 5-bit constant
-
-@item L
-Unsigned 16-bit constant
+A signed 10-bit constant for most arithmetic instructions.
@item M
-Unsigned 8-bit constant
+A signed 16 bit immediate for @code{stop}.
@item N
-Ones complement of unsigned 16-bit constant
+An unsigned 16-bit constant for @code{iohl} and @code{fsmbi}.
@item O
-High 16-bit constant (32-bit constant with 16 LSBs zero)
+An unsigned 7-bit constant whose 3 least significant bits are 0.
-@item Q
-Indirect memory reference with signed 8-bit or index register displacement
+@item P
+An unsigned 3-bit constant for 16-byte rotates and shifts
@item R
-Indirect memory reference with unsigned 5-bit displacement
+Call operand, reg, for indirect calls
@item S
-Indirect memory reference with 1 bit or index register displacement
+Call operand, symbol, for relative calls.
@item T
-Direct memory reference
+Call operand, const_int, for absolute calls.
@item U
-Symbolic address
+An immediate which can be loaded with the il/ila/ilh/ilhu instructions. const_int is sign extended to 128 bit.
+
+@item W
+An immediate for shift and rotate instructions. const_int is treated as a 32 bit value.
+
+@item Y
+An immediate for and/xor/or instructions. const_int is sign extended as a 128 bit.
+
+@item Z
+An immediate for the @code{iohl} instruction. const_int is sign extended to 128 bit.
@end table
@item L
Value appropriate as displacement.
@table @code
- @item (0..4095)
- for short displacement
- @item (-524288..524287)
- for long displacement
+@item (0..4095)
+for short displacement
+@item (@minus{}524288..524287)
+for long displacement
@end table
@item M
@item N
Multiple letter constraint followed by 4 parameter letters.
@table @code
- @item 0..9:
- number of the part counting from most to least significant
- @item H,Q:
- mode of the part
- @item D,S,H:
- mode of the containing operand
- @item 0,F:
- value of the other parts (F---all bits set)
+@item 0..9:
+number of the part counting from most to least significant
+@item H,Q:
+mode of the part
+@item D,S,H:
+mode of the containing operand
+@item 0,F:
+value of the other parts (F---all bits set)
@end table
The constraint matches if the specified part of a constant
-has a value different from it's other parts.
+has a value different from its other parts.
@item Q
Memory reference without index register and with short displacement.
cp1 + cp2 + cp3 registers.
@item I
-Unsigned 15 bit integer (in the range 0 to 32767).
+High 16-bit constant (32-bit constant with 16 LSBs zero).
@item J
Unsigned 5 bit integer (in the range 0 to 31).
@item N
Signed 14 bit integer (in the range @minus{}8192 to 8191).
-@item O
-Signed 15 bit integer (in the range @minus{}16384 to 16383).
-
-@item P
-Signed 12 bit integer (in the range @minus{}2048 to 2047).
-
-@item J
-An integer constant with exactly a single bit set.
-
-@item Q
-An integer constant.
-
@item Z
Any SYMBOL_REF.
@end table
@end table
-@item Xtensa---@file{config/xtensa/xtensa.h}
+@item Xtensa---@file{config/xtensa/constraints.md}
@table @code
@item a
General-purpose 32-bit register
@end table
@ifset INTERNALS
+@node Disable Insn Alternatives
+@subsection Disable insn alternatives using the @code{enabled} attribute
+@cindex enabled
+
+The @code{enabled} insn attribute may be used to disable certain insn
+alternatives for machine-specific reasons. This is useful when adding
+new instructions to an existing pattern which are only available for
+certain cpu architecture levels as specified with the @code{-march=}
+option.
+
+If an insn alternative is disabled, then it will never be used. The
+compiler treats the constraints for the disabled alternative as
+unsatisfiable.
+
+In order to make use of the @code{enabled} attribute a back end has to add
+in the machine description files:
+
+@enumerate
+@item
+A definition of the @code{enabled} insn attribute. The attribute is
+defined as usual using the @code{define_attr} command. This
+definition should be based on other insn attributes and/or target flags.
+The @code{enabled} attribute is a numeric attribute and should evaluate to
+@code{(const_int 1)} for an enabled alternative and to
+@code{(const_int 0)} otherwise.
+@item
+A definition of another insn attribute used to describe for what
+reason an insn alternative might be available or
+not. E.g. @code{cpu_facility} as in the example below.
+@item
+An assignment for the second attribute to each insn definition
+combining instructions which are not all available under the same
+circumstances. (Note: It obviously only makes sense for definitions
+with more than one alternative. Otherwise the insn pattern should be
+disabled or enabled using the insn condition.)
+@end enumerate
+
+E.g. the following two patterns could easily be merged using the @code{enabled}
+attribute:
+
+@smallexample
+
+(define_insn "*movdi_old"
+ [(set (match_operand:DI 0 "register_operand" "=d")
+ (match_operand:DI 1 "register_operand" " d"))]
+ "!TARGET_NEW"
+ "lgr %0,%1")
+
+(define_insn "*movdi_new"
+ [(set (match_operand:DI 0 "register_operand" "=d,f,d")
+ (match_operand:DI 1 "register_operand" " d,d,f"))]
+ "TARGET_NEW"
+ "@@
+ lgr %0,%1
+ ldgr %0,%1
+ lgdr %0,%1")
+
+@end smallexample
+
+to:
+
+@smallexample
+
+(define_insn "*movdi_combined"
+ [(set (match_operand:DI 0 "register_operand" "=d,f,d")
+ (match_operand:DI 1 "register_operand" " d,d,f"))]
+ ""
+ "@@
+ lgr %0,%1
+ ldgr %0,%1
+ lgdr %0,%1"
+ [(set_attr "cpu_facility" "*,new,new")])
+
+@end smallexample
+
+with the @code{enabled} attribute defined like this:
+
+@smallexample
+
+(define_attr "cpu_facility" "standard,new" (const_string "standard"))
+
+(define_attr "enabled" ""
+ (cond [(eq_attr "cpu_facility" "standard") (const_int 1)
+ (and (eq_attr "cpu_facility" "new")
+ (ne (symbol_ref "TARGET_NEW") (const_int 0)))
+ (const_int 1)]
+ (const_int 0)))
+
+@end smallexample
+
+@end ifset
+
+@ifset INTERNALS
@node Define Constraints
@subsection Defining Machine-Specific Constraints
@cindex defining constraints
@deffn {MD Expression} define_register_constraint name regclass docstring
All three arguments are string constants.
@var{name} is the name of the constraint, as it will appear in
-@code{match_operand} expressions. @var{regclass} can be either the
+@code{match_operand} expressions. If @var{name} is a multi-letter
+constraint its length shall be the same for all constraints starting
+with the same letter. @var{regclass} can be either the
name of the corresponding register class (@pxref{Register Classes}),
or a C expression which evaluates to the appropriate register class.
If it is an expression, it must have no side effects, and it cannot
@code{define_memory_constraint}, a @samp{Q} constraint can handle any
memory operand, because @code{reload} knows it can simply copy the
memory address into a base register if required. This is analogous to
-the way a @samp{o} constraint can handle any memory operand.
+the way an @samp{o} constraint can handle any memory operand.
The syntax and semantics are otherwise identical to
@code{define_constraint}.
(define_peephole2
[(match_scratch:SI 3 "r")
(set (match_operand:SI 0 "register_operand" "")
- (mult:SI (match_operand:SI 1 "memory_operand" "")
- (match_operand:SI 2 "immediate_operand" "")))]
+ (mult:SI (match_operand:SI 1 "memory_operand" "")
+ (match_operand:SI 2 "immediate_operand" "")))]
"!satisfies_constraint_K (operands[2])"
If there are cases which need scratch registers during or after reload,
you must provide an appropriate secondary_reload target hook.
-@findex no_new_pseudos
-The global variable @code{no_new_pseudos} can be used to determine if it
+@findex can_create_pseudo_p
+The macro @code{can_create_pseudo_p} can be used to determine if it
is unsafe to create new pseudo registers. If this variable is nonzero, then
it is unsafe to call @code{gen_reg_rtx} to allocate a new pseudo.
Extract given field from the vector value. Operand 1 is the vector, operand 2
specify field index and operand 0 place to store value into.
+@cindex @code{vec_extract_even@var{m}} instruction pattern
+@item @samp{vec_extract_even@var{m}}
+Extract even elements from the input vectors (operand 1 and operand 2).
+The even elements of operand 2 are concatenated to the even elements of operand
+1 in their original order. The result is stored in operand 0.
+The output and input vectors should have the same modes.
+
+@cindex @code{vec_extract_odd@var{m}} instruction pattern
+@item @samp{vec_extract_odd@var{m}}
+Extract odd elements from the input vectors (operand 1 and operand 2).
+The odd elements of operand 2 are concatenated to the odd elements of operand
+1 in their original order. The result is stored in operand 0.
+The output and input vectors should have the same modes.
+
+@cindex @code{vec_interleave_high@var{m}} instruction pattern
+@item @samp{vec_interleave_high@var{m}}
+Merge high elements of the two input vectors into the output vector. The output
+and input vectors should have the same modes (@code{N} elements). The high
+@code{N/2} elements of the first input vector are interleaved with the high
+@code{N/2} elements of the second input vector.
+
+@cindex @code{vec_interleave_low@var{m}} instruction pattern
+@item @samp{vec_interleave_low@var{m}}
+Merge low elements of the two input vectors into the output vector. The output
+and input vectors should have the same modes (@code{N} elements). The low
+@code{N/2} elements of the first input vector are interleaved with the low
+@code{N/2} elements of the second input vector.
+
@cindex @code{vec_init@var{m}} instruction pattern
@item @samp{vec_init@var{m}}
Initialize the vector to given values. Operand 0 is the vector to initialize
must have mode @var{m}. This can be used even on two-address machines, by
means of constraints requiring operands 1 and 0 to be the same location.
+@cindex @code{ssadd@var{m}3} instruction pattern
+@cindex @code{usadd@var{m}3} instruction pattern
@cindex @code{sub@var{m}3} instruction pattern
+@cindex @code{sssub@var{m}3} instruction pattern
+@cindex @code{ussub@var{m}3} instruction pattern
@cindex @code{mul@var{m}3} instruction pattern
+@cindex @code{ssmul@var{m}3} instruction pattern
+@cindex @code{usmul@var{m}3} instruction pattern
@cindex @code{div@var{m}3} instruction pattern
+@cindex @code{ssdiv@var{m}3} instruction pattern
@cindex @code{udiv@var{m}3} instruction pattern
+@cindex @code{usdiv@var{m}3} instruction pattern
@cindex @code{mod@var{m}3} instruction pattern
@cindex @code{umod@var{m}3} instruction pattern
@cindex @code{umin@var{m}3} instruction pattern
@cindex @code{and@var{m}3} instruction pattern
@cindex @code{ior@var{m}3} instruction pattern
@cindex @code{xor@var{m}3} instruction pattern
-@item @samp{sub@var{m}3}, @samp{mul@var{m}3}
-@itemx @samp{div@var{m}3}, @samp{udiv@var{m}3}
+@item @samp{ssadd@var{m}3}, @samp{usadd@var{m}3}
+@item @samp{sub@var{m}3}, @samp{sssub@var{m}3}, @samp{ussub@var{m}3}
+@item @samp{mul@var{m}3}, @samp{ssmul@var{m}3}, @samp{usmul@var{m}3}
+@itemx @samp{div@var{m}3}, @samp{ssdiv@var{m}3}
+@itemx @samp{udiv@var{m}3}, @samp{usdiv@var{m}3}
@itemx @samp{mod@var{m}3}, @samp{umod@var{m}3}
@itemx @samp{umin@var{m}3}, @samp{umax@var{m}3}
@itemx @samp{and@var{m}3}, @samp{ior@var{m}3}, @samp{xor@var{m}3}
Operand 0 is where the resulting shifted vector is stored.
The output and input vectors should have the same modes.
+@cindex @code{vec_pack_trunc_@var{m}} instruction pattern
+@item @samp{vec_pack_trunc_@var{m}}
+Narrow (demote) and merge the elements of two vectors. Operands 1 and 2
+are vectors of the same mode having N integral or floating point elements
+of size S@. Operand 0 is the resulting vector in which 2*N elements of
+size N/2 are concatenated after narrowing them down using truncation.
+
+@cindex @code{vec_pack_ssat_@var{m}} instruction pattern
+@cindex @code{vec_pack_usat_@var{m}} instruction pattern
+@item @samp{vec_pack_ssat_@var{m}}, @samp{vec_pack_usat_@var{m}}
+Narrow (demote) and merge the elements of two vectors. Operands 1 and 2
+are vectors of the same mode having N integral elements of size S.
+Operand 0 is the resulting vector in which the elements of the two input
+vectors are concatenated after narrowing them down using signed/unsigned
+saturating arithmetic.
+
+@cindex @code{vec_pack_sfix_trunc_@var{m}} instruction pattern
+@cindex @code{vec_pack_ufix_trunc_@var{m}} instruction pattern
+@item @samp{vec_pack_sfix_trunc_@var{m}}, @samp{vec_pack_ufix_trunc_@var{m}}
+Narrow, convert to signed/unsigned integral type and merge the elements
+of two vectors. Operands 1 and 2 are vectors of the same mode having N
+floating point elements of size S@. Operand 0 is the resulting vector
+in which 2*N elements of size N/2 are concatenated.
+
+@cindex @code{vec_unpacks_hi_@var{m}} instruction pattern
+@cindex @code{vec_unpacks_lo_@var{m}} instruction pattern
+@item @samp{vec_unpacks_hi_@var{m}}, @samp{vec_unpacks_lo_@var{m}}
+Extract and widen (promote) the high/low part of a vector of signed
+integral or floating point elements. The input vector (operand 1) has N
+elements of size S@. Widen (promote) the high/low elements of the vector
+using signed or floating point extension and place the resulting N/2
+values of size 2*S in the output vector (operand 0).
+
+@cindex @code{vec_unpacku_hi_@var{m}} instruction pattern
+@cindex @code{vec_unpacku_lo_@var{m}} instruction pattern
+@item @samp{vec_unpacku_hi_@var{m}}, @samp{vec_unpacku_lo_@var{m}}
+Extract and widen (promote) the high/low part of a vector of unsigned
+integral elements. The input vector (operand 1) has N elements of size S.
+Widen (promote) the high/low elements of the vector using zero extension and
+place the resulting N/2 values of size 2*S in the output vector (operand 0).
+
+@cindex @code{vec_unpacks_float_hi_@var{m}} instruction pattern
+@cindex @code{vec_unpacks_float_lo_@var{m}} instruction pattern
+@cindex @code{vec_unpacku_float_hi_@var{m}} instruction pattern
+@cindex @code{vec_unpacku_float_lo_@var{m}} instruction pattern
+@item @samp{vec_unpacks_float_hi_@var{m}}, @samp{vec_unpacks_float_lo_@var{m}}
+@itemx @samp{vec_unpacku_float_hi_@var{m}}, @samp{vec_unpacku_float_lo_@var{m}}
+Extract, convert to floating point type and widen the high/low part of a
+vector of signed/unsigned integral elements. The input vector (operand 1)
+has N elements of size S@. Convert the high/low elements of the vector using
+floating point conversion and place the resulting N/2 values of size 2*S in
+the output vector (operand 0).
+
+@cindex @code{vec_widen_umult_hi_@var{m}} instruction pattern
+@cindex @code{vec_widen_umult_lo__@var{m}} instruction pattern
+@cindex @code{vec_widen_smult_hi_@var{m}} instruction pattern
+@cindex @code{vec_widen_smult_lo_@var{m}} instruction pattern
+@item @samp{vec_widen_umult_hi_@var{m}}, @samp{vec_widen_umult_lo_@var{m}}
+@itemx @samp{vec_widen_smult_hi_@var{m}}, @samp{vec_widen_smult_lo_@var{m}}
+Signed/Unsigned widening multiplication. The two inputs (operands 1 and 2)
+are vectors with N signed/unsigned elements of size S@. Multiply the high/low
+elements of the two vectors, and put the N/2 products of size 2*S in the
+output vector (operand 0).
+
@cindex @code{mulhisi3} instruction pattern
@item @samp{mulhisi3}
Multiply operands 1 and 2, which have mode @code{HImode}, and store
@item @samp{umul@var{m}3_highpart}
Similar, but the multiplication is unsigned.
+@cindex @code{madd@var{m}@var{n}4} instruction pattern
+@item @samp{madd@var{m}@var{n}4}
+Multiply operands 1 and 2, sign-extend them to mode @var{n}, add
+operand 3, and store the result in operand 0. Operands 1 and 2
+have mode @var{m} and operands 0 and 3 have mode @var{n}.
+Both modes must be integer or fixed-point modes and @var{n} must be twice
+the size of @var{m}.
+
+In other words, @code{madd@var{m}@var{n}4} is like
+@code{mul@var{m}@var{n}3} except that it also adds operand 3.
+
+These instructions are not allowed to @code{FAIL}.
+
+@cindex @code{umadd@var{m}@var{n}4} instruction pattern
+@item @samp{umadd@var{m}@var{n}4}
+Like @code{madd@var{m}@var{n}4}, but zero-extend the multiplication
+operands instead of sign-extending them.
+
+@cindex @code{ssmadd@var{m}@var{n}4} instruction pattern
+@item @samp{ssmadd@var{m}@var{n}4}
+Like @code{madd@var{m}@var{n}4}, but all involved operations must be
+signed-saturating.
+
+@cindex @code{usmadd@var{m}@var{n}4} instruction pattern
+@item @samp{usmadd@var{m}@var{n}4}
+Like @code{umadd@var{m}@var{n}4}, but all involved operations must be
+unsigned-saturating.
+
+@cindex @code{msub@var{m}@var{n}4} instruction pattern
+@item @samp{msub@var{m}@var{n}4}
+Multiply operands 1 and 2, sign-extend them to mode @var{n}, subtract the
+result from operand 3, and store the result in operand 0. Operands 1 and 2
+have mode @var{m} and operands 0 and 3 have mode @var{n}.
+Both modes must be integer or fixed-point modes and @var{n} must be twice
+the size of @var{m}.
+
+In other words, @code{msub@var{m}@var{n}4} is like
+@code{mul@var{m}@var{n}3} except that it also subtracts the result
+from operand 3.
+
+These instructions are not allowed to @code{FAIL}.
+
+@cindex @code{umsub@var{m}@var{n}4} instruction pattern
+@item @samp{umsub@var{m}@var{n}4}
+Like @code{msub@var{m}@var{n}4}, but zero-extend the multiplication
+operands instead of sign-extending them.
+
+@cindex @code{ssmsub@var{m}@var{n}4} instruction pattern
+@item @samp{ssmsub@var{m}@var{n}4}
+Like @code{msub@var{m}@var{n}4}, but all involved operations must be
+signed-saturating.
+
+@cindex @code{usmsub@var{m}@var{n}4} instruction pattern
+@item @samp{usmsub@var{m}@var{n}4}
+Like @code{umsub@var{m}@var{n}4}, but all involved operations must be
+unsigned-saturating.
+
@cindex @code{divmod@var{m}4} instruction pattern
@item @samp{divmod@var{m}4}
Signed division that produces both a quotient and a remainder.
@anchor{shift patterns}
@cindex @code{ashl@var{m}3} instruction pattern
-@item @samp{ashl@var{m}3}
+@cindex @code{ssashl@var{m}3} instruction pattern
+@cindex @code{usashl@var{m}3} instruction pattern
+@item @samp{ashl@var{m}3}, @samp{ssashl@var{m}3}, @samp{usashl@var{m}3}
Arithmetic-shift operand 1 left by a number of bits specified by operand
2, and store the result in operand 0. Here @var{m} is the mode of
operand 0 and operand 1; operand 2's mode is specified by the
instruction pattern, and the compiler will convert the operand to that
mode before generating the instruction. The meaning of out-of-range shift
counts can optionally be specified by @code{TARGET_SHIFT_TRUNCATION_MASK}.
-@xref{TARGET_SHIFT_TRUNCATION_MASK}.
+@xref{TARGET_SHIFT_TRUNCATION_MASK}. Operand 2 is always a scalar type.
@cindex @code{ashr@var{m}3} instruction pattern
@cindex @code{lshr@var{m}3} instruction pattern
@cindex @code{rotr@var{m}3} instruction pattern
@item @samp{ashr@var{m}3}, @samp{lshr@var{m}3}, @samp{rotl@var{m}3}, @samp{rotr@var{m}3}
Other shift and rotate instructions, analogous to the
-@code{ashl@var{m}3} instructions.
+@code{ashl@var{m}3} instructions. Operand 2 is always a scalar type.
+
+@cindex @code{vashl@var{m}3} instruction pattern
+@cindex @code{vashr@var{m}3} instruction pattern
+@cindex @code{vlshr@var{m}3} instruction pattern
+@cindex @code{vrotl@var{m}3} instruction pattern
+@cindex @code{vrotr@var{m}3} instruction pattern
+@item @samp{vashl@var{m}3}, @samp{vashr@var{m}3}, @samp{vlshr@var{m}3}, @samp{vrotl@var{m}3}, @samp{vrotr@var{m}3}
+Vector shift and rotate instructions that take vectors as operand 2
+instead of a scalar type.
@cindex @code{neg@var{m}2} instruction pattern
-@item @samp{neg@var{m}2}
+@cindex @code{ssneg@var{m}2} instruction pattern
+@cindex @code{usneg@var{m}2} instruction pattern
+@item @samp{neg@var{m}2}, @samp{ssneg@var{m}2}, @samp{usneg@var{m}2}
Negate operand 1 and store the result in operand 0.
@cindex @code{abs@var{m}2} instruction pattern
built-in function uses the mode which corresponds to the C data
type @code{float}.
+@cindex @code{lrint@var{m}@var{n}2}
+@item @samp{lrint@var{m}@var{n}2}
+Convert operand 1 (valid for floating point mode @var{m}) to fixed
+point mode @var{n} as a signed number according to the current
+rounding mode and store in operand 0 (which has mode @var{n}).
+
+@cindex @code{lround@var{m}@var{n}2}
+@item @samp{lround@var{m}2}
+Convert operand 1 (valid for floating point mode @var{m}) to fixed
+point mode @var{n} as a signed number rounding to nearest and away
+from zero and store in operand 0 (which has mode @var{n}).
+
+@cindex @code{lfloor@var{m}@var{n}2}
+@item @samp{lfloor@var{m}2}
+Convert operand 1 (valid for floating point mode @var{m}) to fixed
+point mode @var{n} as a signed number rounding down and store in
+operand 0 (which has mode @var{n}).
+
+@cindex @code{lceil@var{m}@var{n}2}
+@item @samp{lceil@var{m}2}
+Convert operand 1 (valid for floating point mode @var{m}) to fixed
+point mode @var{n} as a signed number rounding up and store in
+operand 0 (which has mode @var{n}).
+
@cindex @code{copysign@var{m}3} instruction pattern
@item @samp{copysign@var{m}3}
Store a value with the magnitude of operand 1 and the sign of operand
@cindex @code{clz@var{m}2} instruction pattern
@item @samp{clz@var{m}2}
Store into operand 0 the number of leading 0-bits in @var{x}, starting
-at the most significant bit position. If @var{x} is 0, the result is
-undefined. @var{m} is the mode of operand 0; operand 1's mode is
+at the most significant bit position. If @var{x} is 0, the
+@code{CLZ_DEFINED_VALUE_AT_ZERO} (@pxref{Misc}) macro defines if
+the result is undefined or has a useful value.
+@var{m} is the mode of operand 0; operand 1's mode is
specified by the instruction pattern, and the compiler will convert the
operand to that mode before generating the instruction.
@cindex @code{ctz@var{m}2} instruction pattern
@item @samp{ctz@var{m}2}
Store into operand 0 the number of trailing 0-bits in @var{x}, starting
-at the least significant bit position. If @var{x} is 0, the result is
-undefined. @var{m} is the mode of operand 0; operand 1's mode is
+at the least significant bit position. If @var{x} is 0, the
+@code{CTZ_DEFINED_VALUE_AT_ZERO} (@pxref{Misc}) macro defines if
+the result is undefined or has a useful value.
+@var{m} is the mode of operand 0; operand 1's mode is
specified by the instruction pattern, and the compiler will convert the
operand to that mode before generating the instruction.
@item @samp{one_cmpl@var{m}2}
Store the bitwise-complement of operand 1 into operand 0.
-@cindex @code{cmp@var{m}} instruction pattern
-@item @samp{cmp@var{m}}
-Compare operand 0 and operand 1, and set the condition codes.
-The RTL pattern should look like this:
-
-@smallexample
-(set (cc0) (compare (match_operand:@var{m} 0 @dots{})
- (match_operand:@var{m} 1 @dots{})))
-@end smallexample
-
-@cindex @code{tst@var{m}} instruction pattern
-@item @samp{tst@var{m}}
-Compare operand 0 against zero, and set the condition codes.
-The RTL pattern should look like this:
-
-@smallexample
-(set (cc0) (match_operand:@var{m} 0 @dots{}))
-@end smallexample
-
-@samp{tst@var{m}} patterns should not be defined for machines that do
-not use @code{(cc0)}. Doing so would confuse the optimizer since it
-would no longer be clear which @code{set} operations were comparisons.
-The @samp{cmp@var{m}} patterns should be used instead.
-
@cindex @code{movmem@var{m}} instruction pattern
@item @samp{movmem@var{m}}
Block move instruction. The destination and source blocks of memory
compiler knows that both source and destination are word-aligned,
it may provide the value 4 for this operand.
+Optional operands 5 and 6 specify expected alignment and size of block
+respectively. The expected alignment differs from alignment in operand 4
+in a way that the blocks are not required to be aligned according to it in
+all cases. This expected alignment is also in bytes, just like operand 4.
+Expected size, when unknown, is set to @code{(const_int -1)}.
+
Descriptions of multiple @code{movmem@var{m}} patterns can only be
beneficial if the patterns for smaller modes have fewer restrictions
on their first, second and fourth operands. Note that the mode @var{m}
destination is word-aligned, it may provide the value 4 for this
operand.
+Optional operands 5 and 6 specify expected alignment and size of block
+respectively. The expected alignment differs from alignment in operand 4
+in a way that the blocks are not required to be aligned according to it in
+all cases. This expected alignment is also in bytes, just like operand 4.
+Expected size, when unknown, is set to @code{(const_int -1)}.
+
The use for multiple @code{setmem@var{m}} is as for @code{movmem@var{m}}.
@cindex @code{cmpstrn@var{m}} instruction pattern
store in operand 0 (which has mode @var{n}). Both modes must be fixed
point.
+@cindex @code{fract@var{mn}2} instruction pattern
+@item @samp{fract@var{m}@var{n}2}
+Convert operand 1 of mode @var{m} to mode @var{n} and store in
+operand 0 (which has mode @var{n}). Mode @var{m} and mode @var{n}
+could be fixed-point to fixed-point, signed integer to fixed-point,
+fixed-point to signed integer, floating-point to fixed-point,
+or fixed-point to floating-point.
+When overflows or underflows happen, the results are undefined.
+
+@cindex @code{satfract@var{mn}2} instruction pattern
+@item @samp{satfract@var{m}@var{n}2}
+Convert operand 1 of mode @var{m} to mode @var{n} and store in
+operand 0 (which has mode @var{n}). Mode @var{m} and mode @var{n}
+could be fixed-point to fixed-point, signed integer to fixed-point,
+or floating-point to fixed-point.
+When overflows or underflows happen, the instruction saturates the
+results to the maximum or the minimum.
+
+@cindex @code{fractuns@var{mn}2} instruction pattern
+@item @samp{fractuns@var{m}@var{n}2}
+Convert operand 1 of mode @var{m} to mode @var{n} and store in
+operand 0 (which has mode @var{n}). Mode @var{m} and mode @var{n}
+could be unsigned integer to fixed-point, or
+fixed-point to unsigned integer.
+When overflows or underflows happen, the results are undefined.
+
+@cindex @code{satfractuns@var{mn}2} instruction pattern
+@item @samp{satfractuns@var{m}@var{n}2}
+Convert unsigned integer operand 1 of mode @var{m} to fixed-point mode
+@var{n} and store in operand 0 (which has mode @var{n}).
+When overflows or underflows happen, the instruction saturates the
+results to the maximum or the minimum.
+
@cindex @code{extv} instruction pattern
@item @samp{extv}
Extract a bit-field from operand 1 (a register or memory operand), where
comparison in operand 1. If the comparison is true, operand 2 is moved into
operand 0, otherwise (operand 2 + operand 3) is moved.
-@cindex @code{s@var{cond}} instruction pattern
-@item @samp{s@var{cond}}
-Store zero or nonzero in the operand according to the condition codes.
-Value stored is nonzero iff the condition @var{cond} is true.
-@var{cond} is the name of a comparison operation expression code, such
-as @code{eq}, @code{lt} or @code{leu}.
-
-You specify the mode that the operand must have when you write the
-@code{match_operand} expression. The compiler automatically sees
-which mode you have used and supplies an operand of that mode.
+@cindex @code{cstore@var{mode}4} instruction pattern
+@item @samp{cstore@var{mode}4}
+Store zero or nonzero in operand 0 according to whether a comparison
+is true. Operand 1 is a comparison operator. Operand 2 and operand 3
+are the first and second operand of the comparison, respectively.
+You specify the mode that operand 0 must have when you write the
+@code{match_operand} expression. The compiler automatically sees which
+mode you have used and supplies an operand of that mode.
The value stored for a true condition must have 1 as its low bit, or
else must be negative. Otherwise the instruction is not suitable and
If these operations are omitted, the compiler will usually generate code
that copies the constant one to the target and branches around an
assignment of zero to the target. If this code is more efficient than
-the potential instructions used for the @samp{s@var{cond}} pattern
+the potential instructions used for the @samp{cstore@var{mode}4} pattern
followed by those required to convert the result into a 1 or a zero in
-@code{SImode}, you should omit the @samp{s@var{cond}} operations from
+@code{SImode}, you should omit the @samp{cstore@var{mode}4} operations from
the machine description.
-@cindex @code{b@var{cond}} instruction pattern
-@item @samp{b@var{cond}}
-Conditional branch instruction. Operand 0 is a @code{label_ref} that
-refers to the label to jump to. Jump if the condition codes meet
-condition @var{cond}.
-
-Some machines do not follow the model assumed here where a comparison
-instruction is followed by a conditional branch instruction. In that
-case, the @samp{cmp@var{m}} (and @samp{tst@var{m}}) patterns should
-simply store the operands away and generate all the required insns in a
-@code{define_expand} (@pxref{Expander Definitions}) for the conditional
-branch operations. All calls to expand @samp{b@var{cond}} patterns are
-immediately preceded by calls to expand either a @samp{cmp@var{m}}
-pattern or a @samp{tst@var{m}} pattern.
-
-Machines that use a pseudo register for the condition code value, or
-where the mode used for the comparison depends on the condition being
-tested, should also use the above mechanism. @xref{Jump Patterns}.
-
-The above discussion also applies to the @samp{mov@var{mode}cc} and
-@samp{s@var{cond}} patterns.
-
@cindex @code{cbranch@var{mode}4} instruction pattern
@item @samp{cbranch@var{mode}4}
Conditional branch instruction combined with a compare instruction.
A label to jump to if the index has a value outside the bounds.
@end enumerate
-The table is a @code{addr_vec} or @code{addr_diff_vec} inside of a
+The table is an @code{addr_vec} or @code{addr_diff_vec} inside of a
@code{jump_insn}. The number of elements in the table is one plus the
difference between the upper bound and the lower bound.
@cindex @code{builtin_setjmp_receiver} instruction pattern
@item @samp{builtin_setjmp_receiver}
-This pattern, if defined, contains code needed at the site of an
+This pattern, if defined, contains code needed at the site of a
built-in setjmp that isn't needed at the site of a nonlocal goto. You
will not normally need to define this pattern. A typical reason why you
might need this pattern is if some value, such as a pointer to a global
kind of signal to be raised. Among other places, it is used by the Java
front end to signal `invalid array index' exceptions.
-@cindex @code{conditional_trap} instruction pattern
-@item @samp{conditional_trap}
+@cindex @code{ctrap@var{MM}4} instruction pattern
+@item @samp{ctrap@var{MM}4}
Conditional trap instruction. Operand 0 is a piece of RTL which
-performs a comparison. Operand 1 is the trap code, an integer.
+performs a comparison, and operands 1 and 2 are the arms of the
+comparison. Operand 3 is the trap code, an integer.
-A typical @code{conditional_trap} pattern looks like
+A typical @code{ctrap} pattern looks like
@smallexample
-(define_insn "conditional_trap"
+(define_insn "ctrapsi4"
[(trap_if (match_operator 0 "trap_operator"
- [(cc0) (const_int 0)])
- (match_operand 1 "const_int_operand" "i"))]
+ [(match_operand 1 "register_operand")
+ (match_operand 2 "immediate_operand")])
+ (match_operand 3 "const_int_operand" "i"))]
""
"@dots{}")
@end smallexample
Targets that do not support write prefetches or locality hints can ignore
the values of operands 1 and 2.
+@cindex @code{blockage} instruction pattern
+@item @samp{blockage}
+
+This pattern defines a pseudo insn that prevents the instruction
+scheduler from moving instructions across the boundary defined by the
+blockage insn. Normally an UNSPEC_VOLATILE pattern.
+
@cindex @code{memory_barrier} instruction pattern
@item @samp{memory_barrier}
operation and all memory operations after the atomic operation occur
after the atomic operation.
-@cindex @code{sync_compare_and_swap_cc@var{mode}} instruction pattern
-@item @samp{sync_compare_and_swap_cc@var{mode}}
-
-This pattern is just like @code{sync_compare_and_swap@var{mode}}, except
-it should act as if compare part of the compare-and-swap were issued via
-@code{cmp@var{m}}. This comparison will only be used with @code{EQ} and
-@code{NE} branches and @code{setcc} operations.
-
-Some targets do expose the success or failure of the compare-and-swap
-operation via the status flags. Ideally we wouldn't need a separate
-named pattern in order to take advantage of this, but the combine pass
-does not handle patterns with multiple sets, which is required by
-definition for @code{sync_compare_and_swap@var{mode}}.
+For targets where the success or failure of the compare-and-swap
+operation is available via the status flags, it is possible to
+avoid a separate compare operation and issue the subsequent
+branch or store-flag operation immediately after the compare-and-swap.
+To this end, GCC will look for a @code{MODE_CC} set in the
+output of @code{sync_compare_and_swap@var{mode}}; if the machine
+description includes such a set, the target should also define special
+@code{cbranchcc4} and/or @code{cstorecc4} instructions. GCC will then
+be able to take the destination of the @code{MODE_CC} set and pass it
+to the @code{cbranchcc4} or @code{cstorecc4} pattern as the first
+operand of the comparison (the second will be @code{(const_int 0)}).
@cindex @code{sync_add@var{mode}} instruction pattern
@cindex @code{sync_sub@var{mode}} instruction pattern
Operand 0 is the memory on which the atomic operation is performed.
Operand 1 is the second operand to the binary operator.
-The ``nand'' operation is @code{~op0 & op1}.
-
This pattern must issue any memory barrier instructions such that all
memory operations before the atomic operation occur before the atomic
operation and all memory operations after the atomic operation occur
If this pattern is not defined, then a plain compare pattern and
conditional branch pattern is used.
+@cindex @code{clear_cache} instruction pattern
+@item @samp{clear_cache}
+
+This pattern, if defined, flushes the instruction cache for a region of
+memory. The region is bounded to by the Pmode pointers in operand 0
+inclusive and operand 1 exclusive.
+
+If this pattern is not defined, a call to the library function
+@code{__clear_cache} is used.
+
@end table
@end ifset
@cindex Dependent Patterns
@cindex Interdependence of Patterns
-Every machine description must have a named pattern for each of the
-conditional branch names @samp{b@var{cond}}. The recognition template
-must always have the form
-
-@smallexample
-(set (pc)
- (if_then_else (@var{cond} (cc0) (const_int 0))
- (label_ref (match_operand 0 "" ""))
- (pc)))
-@end smallexample
-
-@noindent
-In addition, every machine description must have an anonymous pattern
-for each of the possible reverse-conditional branches. Their templates
-look like
-
-@smallexample
-(set (pc)
- (if_then_else (@var{cond} (cc0) (const_int 0))
- (pc)
- (label_ref (match_operand 0 "" ""))))
-@end smallexample
-
-@noindent
-They are necessary because jump optimization can turn direct-conditional
-branches into reverse-conditional branches.
-
-It is often convenient to use the @code{match_operator} construct to
-reduce the number of patterns that must be specified for branches. For
-example,
-
-@smallexample
-(define_insn ""
- [(set (pc)
- (if_then_else (match_operator 0 "comparison_operator"
- [(cc0) (const_int 0)])
- (pc)
- (label_ref (match_operand 1 "" ""))))]
- "@var{condition}"
- "@dots{}")
-@end smallexample
-
In some cases machines support instructions identical except for the
machine mode of one or more operands. For example, there may be
``sign-extend halfword'' and ``sign-extend byte'' instructions whose
@cindex jump instruction patterns
@cindex defining jump instruction patterns
-For most machines, GCC assumes that the machine has a condition code.
-A comparison insn sets the condition code, recording the results of both
-signed and unsigned comparison of the given operands. A separate branch
-insn tests the condition code and branches or not according its value.
-The branch insns come in distinct signed and unsigned flavors. Many
-common machines, such as the VAX, the 68000 and the 32000, work this
-way.
-
-Some machines have distinct signed and unsigned compare instructions, and
-only one set of conditional branch instructions. The easiest way to handle
-these machines is to treat them just like the others until the final stage
-where assembly code is written. At this time, when outputting code for the
-compare instruction, peek ahead at the following branch using
-@code{next_cc0_user (insn)}. (The variable @code{insn} refers to the insn
-being output, in the output-writing code in an instruction pattern.) If
-the RTL says that is an unsigned branch, output an unsigned compare;
-otherwise output a signed compare. When the branch itself is output, you
-can treat signed and unsigned branches identically.
-
-The reason you can do this is that GCC always generates a pair of
-consecutive RTL insns, possibly separated by @code{note} insns, one to
-set the condition code and one to test it, and keeps the pair inviolate
-until the end.
-
-To go with this technique, you must define the machine-description macro
-@code{NOTICE_UPDATE_CC} to do @code{CC_STATUS_INIT}; in other words, no
-compare instruction is superfluous.
-
-Some machines have compare-and-branch instructions and no condition code.
-A similar technique works for them. When it is time to ``output'' a
-compare instruction, record its operands in two static variables. When
-outputting the branch-on-condition-code instruction that follows, actually
-output a compare-and-branch instruction that uses the remembered operands.
-
-It also works to define patterns for compare-and-branch instructions.
-In optimizing compilation, the pair of compare and branch instructions
-will be combined according to these patterns. But this does not happen
-if optimization is not requested. So you must use one of the solutions
-above in addition to any special patterns you define.
-
-In many RISC machines, most instructions do not affect the condition
-code and there may not even be a separate condition code register. On
-these machines, the restriction that the definition and use of the
-condition code be adjacent insns is not necessary and can prevent
-important optimizations. For example, on the IBM RS/6000, there is a
-delay for taken branches unless the condition code register is set three
-instructions earlier than the conditional branch. The instruction
-scheduler cannot perform this optimization if it is not permitted to
-separate the definition and use of the condition code register.
-
-On these machines, do not use @code{(cc0)}, but instead use a register
-to represent the condition code. If there is a specific condition code
-register in the machine, use a hard register. If the condition code or
-comparison result can be placed in any general register, or if there are
-multiple condition registers, use a pseudo register.
-
-@findex prev_cc0_setter
-@findex next_cc0_user
-On some machines, the type of branch instruction generated may depend on
-the way the condition code was produced; for example, on the 68k and
-SPARC, setting the condition code directly from an add or subtract
-instruction does not clear the overflow bit the way that a test
-instruction does, so a different branch instruction must be used for
-some conditional branches. For machines that use @code{(cc0)}, the set
-and use of the condition code must be adjacent (separated only by
-@code{note} insns) allowing flags in @code{cc_status} to be used.
-(@xref{Condition Code}.) Also, the comparison and branch insns can be
-located from each other by using the functions @code{prev_cc0_setter}
-and @code{next_cc0_user}.
-
-However, this is not true on machines that do not use @code{(cc0)}. On
-those machines, no assumptions can be made about the adjacency of the
-compare and branch insns and the above methods cannot be used. Instead,
-we use the machine mode of the condition code register to record
-different formats of the condition code register.
-
-Registers used to store the condition code value should have a mode that
-is in class @code{MODE_CC}. Normally, it will be @code{CCmode}. If
-additional modes are required (as for the add example mentioned above in
-the SPARC), define them in @file{@var{machine}-modes.def}
-(@pxref{Condition Code}). Also define @code{SELECT_CC_MODE} to choose
-a mode given an operand of a compare.
-
-If it is known during RTL generation that a different mode will be
-required (for example, if the machine has separate compare instructions
-for signed and unsigned quantities, like most IBM processors), they can
-be specified at that time.
-
-If the cases that require different modes would be made by instruction
-combination, the macro @code{SELECT_CC_MODE} determines which machine
-mode should be used for the comparison result. The patterns should be
-written using that mode. To support the case of the add on the SPARC
-discussed above, we have the pattern
-
-@smallexample
-(define_insn ""
- [(set (reg:CC_NOOV 0)
- (compare:CC_NOOV
- (plus:SI (match_operand:SI 0 "register_operand" "%r")
- (match_operand:SI 1 "arith_operand" "rI"))
- (const_int 0)))]
- ""
- "@dots{}")
-@end smallexample
-
-The @code{SELECT_CC_MODE} macro on the SPARC returns @code{CC_NOOVmode}
-for comparisons whose argument is a @code{plus}.
+GCC does not assume anything about how the machine realizes jumps.
+The machine description should define a single pattern, usually
+a @code{define_expand}, which expands to all the required insns.
+
+Usually, this would be a comparison insn to set the condition code
+and a separate branch insn testing the condition code and branching
+or not according to its value. For many machines, however,
+separating compares and branches is limiting, which is why the
+more flexible approach with one @code{define_expand} is used in GCC.
+The machine description becomes clearer for architectures that
+have compare-and-branch instructions but no condition code. It also
+works better when different sets of comparison operators are supported
+by different kinds of conditional branches (e.g. integer vs. floating-point),
+or by conditional branches with respect to conditional stores.
+
+Two separate insns are always used if the machine description represents
+a condition code register using the legacy RTL expression @code{(cc0)},
+and on most machines that use a separate condition code register
+(@pxref{Condition Code}). For machines that use @code{(cc0)}, in
+fact, the set and use of the condition code must be separate and
+adjacent@footnote{@code{note} insns can separate them, though.}, thus
+allowing flags in @code{cc_status} to be used (@pxref{Condition Code}) and
+so that the comparison and branch insns could be located from each other
+by using the functions @code{prev_cc0_setter} and @code{next_cc0_user}.
+
+Even in this case having a single entry point for conditional branches
+is advantageous, because it handles equally well the case where a single
+comparison instruction records the results of both signed and unsigned
+comparison of the given operands (with the branch insns coming in distinct
+signed and unsigned flavors) as in the x86 or SPARC, and the case where
+there are distinct signed and unsigned compare instructions and only
+one set of conditional branch instructions as in the PowerPC.
@end ifset
@ifset INTERNALS
@group
(define_insn "decrement_and_branch_until_zero"
[(set (pc)
- (if_then_else
- (ge (plus:SI (match_operand:SI 0 "general_operand" "+d*am")
- (const_int -1))
- (const_int 0))
- (label_ref (match_operand 1 "" ""))
- (pc)))
+ (if_then_else
+ (ge (plus:SI (match_operand:SI 0 "general_operand" "+d*am")
+ (const_int -1))
+ (const_int 0))
+ (label_ref (match_operand 1 "" ""))
+ (pc)))
(set (match_dup 0)
- (plus:SI (match_dup 0)
- (const_int -1)))]
+ (plus:SI (match_dup 0)
+ (const_int -1)))]
"find_reg_note (insn, REG_NONNEG, 0)"
"@dots{}")
@end group
@group
(define_insn "decrement_and_branch_until_zero"
[(set (pc)
- (if_then_else
- (ge (match_operand:SI 0 "general_operand" "+d*am")
- (const_int 1))
- (label_ref (match_operand 1 "" ""))
- (pc)))
+ (if_then_else
+ (ge (match_operand:SI 0 "general_operand" "+d*am")
+ (const_int 1))
+ (label_ref (match_operand 1 "" ""))
+ (pc)))
(set (match_dup 0)
- (plus:SI (match_dup 0)
- (const_int -1)))]
+ (plus:SI (match_dup 0)
+ (const_int -1)))]
"find_reg_note (insn, REG_NONNEG, 0)"
"@dots{}")
@end group
@code{minus}, the @code{neg} operations (if any) will be moved inside
the operations as far as possible. For instance,
@code{(neg (mult A B))} is canonicalized as @code{(mult (neg A) B)}, but
-@code{(plus (mult (neg A) B) C)} is canonicalized as
+@code{(plus (mult (neg B) C) A)} is canonicalized as
@code{(minus A (mult B C))}.
@cindex @code{compare}, canonicalization of
@item
For the @code{compare} operator, a constant is always the second operand
-on machines where @code{cc0} is used (@pxref{Jump Patterns}). On other
-machines, there are rare cases where the compiler might want to construct
-a @code{compare} with a constant as the first operand. However, these
-cases are not common enough for it to be worthwhile to provide a pattern
-matching a constant as the first operand unless the machine actually has
-such an instruction.
+if the first argument is a condition code register or @code{(cc0)}.
+@item
An operand of @code{neg}, @code{not}, @code{mult}, @code{plus}, or
@code{minus} is made the first operand under the same conditions as
above.
@item
+@code{(ltu (plus @var{a} @var{b}) @var{b})} is converted to
+@code{(ltu (plus @var{a} @var{b}) @var{a})}. Likewise with @code{geu} instead
+of @code{ltu}.
+
+@item
@code{(minus @var{x} (const_int @var{n}))} is converted to
@code{(plus @var{x} (const_int @var{-n}))}.
(plus:@var{m} (plus:@var{m} @var{x} @var{y}) @var{constant})
@end smallexample
-@item
-On machines that do not use @code{cc0},
-@code{(compare @var{x} (const_int 0))} will be converted to
-@var{x}.
-
@cindex @code{zero_extract}, canonicalization of
@cindex @code{sign_extract}, canonicalization of
@item
jumps, or simple conditional jump instructions. Additionally it must attach a
@code{REG_BR_PROB} note to each conditional jump. A global variable
@code{split_branch_probability} holds the probability of the original branch in case
-it was an simple conditional jump, @minus{}1 otherwise. To simplify
+it was a simple conditional jump, @minus{}1 otherwise. To simplify
recomputing of edge frequencies, the new sequence is required to have only
forward jumps to the newly created labels.
"&& reload_completed"
[(parallel [(set (match_dup 0)
(and:SI (match_dup 0) (const_int 65535)))
- (clobber (reg:CC 17))])]
+ (clobber (reg:CC 17))])]
""
[(set_attr "type" "alu1")])
defined and the function to obtain the attribute's value will return
@code{int}.
+There are attributes which are tied to a specific meaning. These
+attributes are not free to use for other purposes:
+
+@table @code
+@item length
+The @code{length} attribute is used to calculate the length of emitted
+code chunks. This is especially important when verifying branch
+distances. @xref{Insn Lengths}.
+
+@item enabled
+The @code{enabled} attribute can be defined to prevent certain
+alternatives of an insn definition from being used during code
+generation. @xref{Disable Insn Alternatives}.
+
+@end table
+
@end ifset
@ifset INTERNALS
@node Expressions
automaton state to another one. This algorithm is very fast, and
furthermore, its speed is not dependent on processor
complexity@footnote{However, the size of the automaton depends on
- processor complexity. To limit this effect, machine descriptions
- can split orthogonal parts of the machine description among several
- automata: but then, since each of these must be stepped independently,
- this does cause a small decrease in the algorithm's performance.}.
+processor complexity. To limit this effect, machine descriptions
+can split orthogonal parts of the machine description among several
+automata: but then, since each of these must be stepped independently,
+this does cause a small decrease in the algorithm's performance.}.
@cindex automaton based pipeline description
The rest of this section describes the directives that constitute
recognize complicated bypasses, e.g.@: when the consumer is only an address
of insn @samp{store} (not a stored value).
+If there are more one bypass with the same output and input insns, the
+chosen bypass is the first bypass with a guard in description whose
+guard function returns nonzero. If there is no such bypass, then
+bypass without the guard function is chosen.
+
@findex exclusion_set
@findex presence_set
@findex final_presence_set
look more accurately at reservations of states.
@item
-@dfn{time} means printing additional time statistics about
-generation of automata.
+@dfn{time} means printing time statistics about the generation of
+automata.
+
+@item
+@dfn{stats} means printing statistics about the generated automata
+such as the number of DFA states, NDFA states and arcs.
@item
@dfn{v} means a generation of the file describing the result automata.
in the insn-codes.h header file as #defines.
@end ifset
@ifset INTERNALS
-@node Macros
-@section Macros
-@cindex macros in @file{.md} files
+@node Iterators
+@section Iterators
+@cindex iterators in @file{.md} files
Ports often need to define similar patterns for more than one machine
-mode or for more than one rtx code. GCC provides some simple macro
+mode or for more than one rtx code. GCC provides some simple iterator
facilities to make this process easier.
@menu
-* Mode Macros:: Generating variations of patterns for different modes.
-* Code Macros:: Doing the same for codes.
+* Mode Iterators:: Generating variations of patterns for different modes.
+* Code Iterators:: Doing the same for codes.
@end menu
-@node Mode Macros
-@subsection Mode Macros
-@cindex mode macros in @file{.md} files
+@node Mode Iterators
+@subsection Mode Iterators
+@cindex mode iterators in @file{.md} files
Ports often need to define similar patterns for two or more different modes.
For example:
@code{SImode} and @code{DImode} patterns for manipulating pointers.
@end itemize
-Mode macros allow several patterns to be instantiated from one
+Mode iterators allow several patterns to be instantiated from one
@file{.md} file template. They can be used with any type of
rtx-based construct, such as a @code{define_insn},
@code{define_split}, or @code{define_peephole2}.
@menu
-* Defining Mode Macros:: Defining a new mode macro.
-* Substitutions:: Combining mode macros with substitutions
-* Examples:: Examples
+* Defining Mode Iterators:: Defining a new mode iterator.
+* Substitutions:: Combining mode iterators with substitutions
+* Examples:: Examples
@end menu
-@node Defining Mode Macros
-@subsubsection Defining Mode Macros
-@findex define_mode_macro
+@node Defining Mode Iterators
+@subsubsection Defining Mode Iterators
+@findex define_mode_iterator
-The syntax for defining a mode macro is:
+The syntax for defining a mode iterator is:
@smallexample
-(define_mode_macro @var{name} [(@var{mode1} "@var{cond1}") ... (@var{moden} "@var{condn}")])
+(define_mode_iterator @var{name} [(@var{mode1} "@var{cond1}") @dots{} (@var{moden} "@var{condn}")])
@end smallexample
This allows subsequent @file{.md} file constructs to use the mode suffix
For example:
@smallexample
-(define_mode_macro P [(SI "Pmode == SImode") (DI "Pmode == DImode")])
+(define_mode_iterator P [(SI "Pmode == SImode") (DI "Pmode == DImode")])
@end smallexample
defines a new mode suffix @code{:P}. Every construct that uses
to @code{@var{mode}}. For example:
@smallexample
-(define_mode_macro GPR [SI (DI "TARGET_64BIT")])
+(define_mode_iterator GPR [SI (DI "TARGET_64BIT")])
@end smallexample
means that the @code{:DI} expansion only applies if @code{TARGET_64BIT}
but that the @code{:SI} expansion has no such constraint.
-Macros are applied in the order they are defined. This can be
-significant if two macros are used in a construct that requires
+Iterators are applied in the order they are defined. This can be
+significant if two iterators are used in a construct that requires
substitutions. @xref{Substitutions}.
@node Substitutions
-@subsubsection Substitution in Mode Macros
+@subsubsection Substitution in Mode Iterators
@findex define_mode_attr
-If an @file{.md} file construct uses mode macros, each version of the
+If an @file{.md} file construct uses mode iterators, each version of the
construct will often need slightly different strings or modes. For
example:
@item
When a @code{define_insn} requires operands with different modes,
-using a macro for one of the operand modes usually requires a specific
+using an iterator for one of the operand modes usually requires a specific
mode for the other operand(s).
@end itemize
upper case. You can define other attributes using:
@smallexample
-(define_mode_attr @var{name} [(@var{mode1} "@var{value1}") ... (@var{moden} "@var{valuen}")])
+(define_mode_attr @var{name} [(@var{mode1} "@var{value1}") @dots{} (@var{moden} "@var{valuen}")])
@end smallexample
where @var{name} is the name of the attribute and @var{valuei}
is the value associated with @var{modei}.
-When GCC replaces some @var{:macro} with @var{:mode}, it will scan
+When GCC replaces some @var{:iterator} with @var{:mode}, it will scan
each string and mode in the pattern for sequences of the form
-@code{<@var{macro}:@var{attr}>}, where @var{attr} is the name of a
+@code{<@var{iterator}:@var{attr}>}, where @var{attr} is the name of a
mode attribute. If the attribute is defined for @var{mode}, the whole
-@code{<...>} sequence will be replaced by the appropriate attribute
+@code{<@dots{}>} sequence will be replaced by the appropriate attribute
value.
For example, suppose an @file{.md} file has:
@smallexample
-(define_mode_macro P [(SI "Pmode == SImode") (DI "Pmode == DImode")])
+(define_mode_iterator P [(SI "Pmode == SImode") (DI "Pmode == DImode")])
(define_mode_attr load [(SI "lw") (DI "ld")])
@end smallexample
Here is an example of using an attribute for a mode:
@smallexample
-(define_mode_macro LONG [SI DI])
+(define_mode_iterator LONG [SI DI])
(define_mode_attr SHORT [(SI "HI") (DI "SI")])
-(define_insn ...
- (sign_extend:LONG (match_operand:<LONG:SHORT> ...)) ...)
+(define_insn @dots{}
+ (sign_extend:LONG (match_operand:<LONG:SHORT> @dots{})) @dots{})
@end smallexample
-The @code{@var{macro}:} prefix may be omitted, in which case the
-substitution will be attempted for every macro expansion.
+The @code{@var{iterator}:} prefix may be omitted, in which case the
+substitution will be attempted for every iterator expansion.
@node Examples
-@subsubsection Mode Macro Examples
+@subsubsection Mode Iterator Examples
Here is an example from the MIPS port. It defines the following
modes and attributes (among others):
@smallexample
-(define_mode_macro GPR [SI (DI "TARGET_64BIT")])
+(define_mode_iterator GPR [SI (DI "TARGET_64BIT")])
(define_mode_attr d [(SI "") (DI "d")])
@end smallexample
(set_attr "mode" "DI")])
@end smallexample
-@node Code Macros
-@subsection Code Macros
-@cindex code macros in @file{.md} files
-@findex define_code_macro
+@node Code Iterators
+@subsection Code Iterators
+@cindex code iterators in @file{.md} files
+@findex define_code_iterator
@findex define_code_attr
-Code macros operate in a similar way to mode macros. @xref{Mode Macros}.
+Code iterators operate in a similar way to mode iterators. @xref{Mode Iterators}.
The construct:
@smallexample
-(define_code_macro @var{name} [(@var{code1} "@var{cond1}") ... (@var{coden} "@var{condn}")])
+(define_code_iterator @var{name} [(@var{code1} "@var{cond1}") @dots{} (@var{coden} "@var{condn}")])
@end smallexample
defines a pseudo rtx code @var{name} that can be instantiated as
@var{codei} if condition @var{condi} is true. Each @var{codei}
must have the same rtx format. @xref{RTL Classes}.
-As with mode macros, each pattern that uses @var{name} will be
+As with mode iterators, each pattern that uses @var{name} will be
expanded @var{n} times, once with all uses of @var{name} replaced by
@var{code1}, once with all uses replaced by @var{code2}, and so on.
-@xref{Defining Mode Macros}.
+@xref{Defining Mode Iterators}.
It is possible to define attributes for codes as well as for modes.
There are two standard code attributes: @code{code}, the name of the
Other attributes are defined using:
@smallexample
-(define_code_attr @var{name} [(@var{code1} "@var{value1}") ... (@var{coden} "@var{valuen}")])
+(define_code_attr @var{name} [(@var{code1} "@var{value1}") @dots{} (@var{coden} "@var{valuen}")])
@end smallexample
-Here's an example of code macros in action, taken from the MIPS port:
+Here's an example of code iterators in action, taken from the MIPS port:
@smallexample
-(define_code_macro any_cond [unordered ordered unlt unge uneq ltgt unle ungt
- eq ne gt ge lt le gtu geu ltu leu])
+(define_code_iterator any_cond [unordered ordered unlt unge uneq ltgt unle ungt
+ eq ne gt ge lt le gtu geu ltu leu])
(define_expand "b<code>"
[(set (pc)
DONE;
@})
-...
+@dots{}
@end smallexample
@end ifset
OSDN Git Service
