--with-gxx-include-dir=DIR
specifies directory to put g++ header files."
ac_help="$ac_help
- --enable-checking enable expensive run-time checks."
+ --enable-checking[=LIST]
+ enable expensive run-time checks. With LIST,
+ enable only specific categories of checks.
+ Categories are: misc,tree,rtl,gc,gcac; default
+ is misc,tree,rtl"
ac_help="$ac_help
--disable-cpp don't provide a user-visible C preprocessor."
ac_help="$ac_help
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
-echo "configure:604: checking LIBRARY_PATH variable" >&5
+echo "configure:608: checking LIBRARY_PATH variable" >&5
case ${LIBRARY_PATH} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
library_path_setting="contains current directory"
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
-echo "configure:629: checking GCC_EXEC_PREFIX variable" >&5
+echo "configure:633: checking GCC_EXEC_PREFIX variable" >&5
case ${GCC_EXEC_PREFIX} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
gcc_exec_prefix_setting="contains current directory"
yes) cat >> confdefs.h <<\EOF
#define ENABLE_CHECKING 1
EOF
- ;;
+
+ cat >> confdefs.h <<\EOF
+#define ENABLE_TREE_CHECKING 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define ENABLE_RTL_CHECKING 1
+EOF
+ ;;
no) ;;
-*) { echo "configure: error: bad value ${enableval} given for checking option" 1>&2; exit 1; } ;;
+*) ac_save_IFS="$IFS" IFS="$IFS,"
+ set fnord $enableval; shift
+ IFS="$ac_save_IFS"
+ for check
+ do
+ case $check in
+ misc) cat >> confdefs.h <<\EOF
+#define ENABLE_CHECKING 1
+EOF
+ ;;
+ tree) cat >> confdefs.h <<\EOF
+#define ENABLE_TREE_CHECKING 1
+EOF
+ ;;
+ rtl) cat >> confdefs.h <<\EOF
+#define ENABLE_RTL_CHECKING 1
+EOF
+ ;;
+ gc) cat >> confdefs.h <<\EOF
+#define ENABLE_GC_CHECKING 1
+EOF
+ ;;
+ gcac) cat >> confdefs.h <<\EOF
+#define ENABLE_GC_ALWAYS_COLLECT 1
+EOF
+ ;;
+ *) { echo "configure: error: unknown check category $check" 1>&2; exit 1; } ;;
+ esac
+ done
+ ;;
esac
fi
# Check whether --enable-c-mbchar or --disable-c-mbchar was given.
if test "${enable_c_mbchar+set}" = set; then
enableval="$enable_c_mbchar"
- if [ x$enable_c_mbchar != xno ]; then
+ if test x$enable_c_mbchar != xno; then
extra_c_flags="${extra_c_flags} -DMULTIBYTE_CHARS=1"
fi
fi
# Check whether --enable-objc-gc or --disable-objc-gc was given.
if test "${enable_objc_gc+set}" = set; then
enableval="$enable_objc_gc"
- if [ x$enable_objc_gc = xno ]; then
+ if test x$enable_objc_gc = xno; then
objc_boehm_gc=''
else
objc_boehm_gc=1
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:952: checking host system type" >&5
+echo "configure:993: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:973: checking target system type" >&5
+echo "configure:1014: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:991: checking build system type" >&5
+echo "configure:1032: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1018: checking for $ac_word" >&5
+echo "configure:1059: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1048: checking for $ac_word" >&5
+echo "configure:1089: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1099: checking for $ac_word" >&5
+echo "configure:1140: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1131: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1172: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1142 "configure"
+#line 1183 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1147: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1173: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1214: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1178: checking whether we are using GNU C" >&5
+echo "configure:1219: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1187: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1228: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1206: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1247: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for long double""... $ac_c" 1>&6
-echo "configure:1238: checking for long double" >&5
+echo "configure:1279: checking for long double" >&5
if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_c_long_double=yes
else
cat > conftest.$ac_ext <<EOF
-#line 1246 "configure"
+#line 1287 "configure"
#include "confdefs.h"
int main() {
switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
; return 0; }
EOF
-if { (eval echo configure:1256: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1297: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_long_double=yes
else
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1289: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1330: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:1317: checking whether a default assembler was specified" >&5
+echo "configure:1358: checking whether a default assembler was specified" >&5
if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
if test x"$gas_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
fi
echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:1329: checking whether a default linker was specified" >&5
+echo "configure:1370: checking whether a default linker was specified" >&5
if test x"${DEFAULT_LINKER+set}" = x"set"; then
if test x"$gnu_ld_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
fi
# Find some useful tools
-for ac_prog in gawk mawk nawk awk
+for ac_prog in mawk gawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1346: checking for $ac_word" >&5
+echo "configure:1387: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "flex", so it can be a program name with args.
set dummy flex; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1378: checking for $ac_word" >&5
+echo "configure:1419: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) ac_lib=l ;;
esac
echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:1412: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1453: checking for yywrap in -l$ac_lib" >&5
ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$ac_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1420 "configure"
+#line 1461 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
yywrap()
; return 0; }
EOF
-if { (eval echo configure:1431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:1454: checking whether ln works" >&5
+echo "configure:1495: checking whether ln works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1486: checking whether ln -s works" >&5
+echo "configure:1527: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1518: checking for volatile" >&5
+echo "configure:1559: checking for volatile" >&5
if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1523 "configure"
+#line 1564 "configure"
#include "confdefs.h"
int main() {
volatile int foo;
; return 0; }
EOF
-if { (eval echo configure:1530: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1571: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_volatile=yes
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1553: checking for $ac_word" >&5
+echo "configure:1594: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1585: checking for $ac_word" >&5
+echo "configure:1626: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1626: checking for a BSD compatible install" >&5
+echo "configure:1667: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1677: checking how to run the C preprocessor" >&5
+echo "configure:1718: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1692 "configure"
+#line 1733 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1698: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1739: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1709 "configure"
+#line 1750 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1756: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1726 "configure"
+#line 1767 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1732: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1773: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1757: checking for ANSI C header files" >&5
+echo "configure:1798: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1762 "configure"
+#line 1803 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1770: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1811: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1787 "configure"
+#line 1828 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1805 "configure"
+#line 1846 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 1826 "configure"
+#line 1867 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:1837: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1861: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1902: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1866 "configure"
+#line 1907 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:1875: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1916: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:1896: checking whether string.h and strings.h may both be included" >&5
+echo "configure:1937: checking whether string.h and strings.h may both be included" >&5
if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1901 "configure"
+#line 1942 "configure"
#include "confdefs.h"
#include <string.h>
#include <strings.h>
; return 0; }
EOF
-if { (eval echo configure:1909: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1950: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_string=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:1930: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:1971: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1935 "configure"
+#line 1976 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:1951: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1992: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1978: checking for $ac_hdr" >&5
+echo "configure:2019: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1983 "configure"
+#line 2024 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1988: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2029: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Check for thread headers.
ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:2018: checking for thread.h" >&5
+echo "configure:2059: checking for thread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2023 "configure"
+#line 2064 "configure"
#include "confdefs.h"
#include <thread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2028: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2069: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:2052: checking for pthread.h" >&5
+echo "configure:2093: checking for pthread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2057 "configure"
+#line 2098 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2062: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2103: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2089: checking for $ac_word" >&5
+echo "configure:2130: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:2122: checking for preprocessor stringizing operator" >&5
+echo "configure:2163: checking for preprocessor stringizing operator" >&5
if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2127 "configure"
+#line 2168 "configure"
#include "confdefs.h"
#define x(y) #y
# Use <inttypes.h> only if it exists,
# doesn't clash with <sys/types.h>, and declares intmax_t.
echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:2160: checking for inttypes.h" >&5
+echo "configure:2201: checking for inttypes.h" >&5
if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2165 "configure"
+#line 2206 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <inttypes.h>
intmax_t i = -1;
; return 0; }
EOF
-if { (eval echo configure:2173: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2214: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_inttypes_h=yes
else
fputs_unlocked getrusage valloc
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2199: checking for $ac_func" >&5
+echo "configure:2240: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2204 "configure"
+#line 2245 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2227: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2268: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
#AC_CHECK_TYPE(wchar_t, unsigned int)
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:2256: checking for vprintf" >&5
+echo "configure:2297: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2261 "configure"
+#line 2302 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
; return 0; }
EOF
-if { (eval echo configure:2284: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2325: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:2308: checking for _doprnt" >&5
+echo "configure:2349: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2313 "configure"
+#line 2354 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
; return 0; }
EOF
-if { (eval echo configure:2336: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:2372: checking whether the printf functions support %p" >&5
+echo "configure:2413: checking whether the printf functions support %p" >&5
if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_func_printf_ptr=no
else
cat > conftest.$ac_ext <<EOF
-#line 2380 "configure"
+#line 2421 "configure"
#include "confdefs.h"
#include <stdio.h>
exit (p != q);
}
EOF
-if { (eval echo configure:2393: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2434: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_func_printf_ptr=yes
else
;;
esac
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2426: checking for pid_t" >&5
+echo "configure:2467: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2431 "configure"
+#line 2472 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2460: checking for vfork.h" >&5
+echo "configure:2501: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2465 "configure"
+#line 2506 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2470: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2511: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2495: checking for working vfork" >&5
+echo "configure:2536: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2501: checking for vfork" >&5
+echo "configure:2542: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2506 "configure"
+#line 2547 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:2529: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2570: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 2551 "configure"
+#line 2592 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:2646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2687: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2672: checking for $ac_hdr" >&5
+echo "configure:2713: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2677 "configure"
+#line 2718 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2682: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2723: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2711: checking for $ac_func" >&5
+echo "configure:2752: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2716 "configure"
+#line 2757 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2739: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2764: checking for working mmap" >&5
+echo "configure:2805: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 2772 "configure"
+#line 2813 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:2912: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2953: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
strsignal putc_unlocked fputs_unlocked strstr
do
echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:2940: checking whether $ac_func must be declared" >&5
+echo "configure:2981: checking whether $ac_func must be declared" >&5
if eval "test \"`echo '$''{'gcc_cv_decl_needed_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2945 "configure"
+#line 2986 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) $ac_func
; return 0; }
EOF
-if { (eval echo configure:2978: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3019: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_decl_needed_$ac_func=no"
else
for ac_func in malloc realloc calloc free
do
echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:3007: checking whether $ac_func must be declared" >&5
+echo "configure:3048: checking whether $ac_func must be declared" >&5
if eval "test \"`echo '$''{'gcc_cv_decl_needed_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3012 "configure"
+#line 3053 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) $ac_func
; return 0; }
EOF
-if { (eval echo configure:3048: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3089: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_decl_needed_$ac_func=no"
else
for ac_func in getrlimit setrlimit getrusage
do
echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:3077: checking whether $ac_func must be declared" >&5
+echo "configure:3118: checking whether $ac_func must be declared" >&5
if eval "test \"`echo '$''{'gcc_cv_decl_needed_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3082 "configure"
+#line 3123 "configure"
#include "confdefs.h"
#include <stdio.h>
char *(*pfn) = (char *(*)) $ac_func
; return 0; }
EOF
-if { (eval echo configure:3119: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3160: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_decl_needed_$ac_func=no"
else
done
-echo $ac_n "checking for sys_siglist declaration in signal.h or unistd.h""... $ac_c" 1>&6
-echo "configure:3146: checking for sys_siglist declaration in signal.h or unistd.h" >&5
-if eval "test \"`echo '$''{'ac_cv_decl_sys_siglist'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3151 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <signal.h>
-/* NetBSD declares sys_siglist in unistd.h. */
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-int main() {
-char *msg = *(sys_siglist + 1);
-; return 0; }
-EOF
-if { (eval echo configure:3163: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_decl_sys_siglist=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_decl_sys_siglist=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_decl_sys_siglist" 1>&6
-if test $ac_cv_decl_sys_siglist = yes; then
- cat >> confdefs.h <<\EOF
-#define SYS_SIGLIST_DECLARED 1
-EOF
-
-fi
-
-
# mkdir takes a single argument on some systems.
echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:3186: checking if mkdir takes one argument" >&5
+echo "configure:3188: checking if mkdir takes one argument" >&5
if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3191 "configure"
+#line 3193 "configure"
#include "confdefs.h"
#include <sys/types.h>
mkdir ("foo", 0);
; return 0; }
EOF
-if { (eval echo configure:3208: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3210: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_mkdir_takes_one_arg=no
else
mips*-*-*)
cpu_type=mips
;;
+ pj*-*-*)
+ cpu_type=pj
+ ;;
powerpc*-*-*)
cpu_type=rs6000
;;
;;
arm*-*-netbsd*)
tm_file=arm/netbsd.h
- xm_file="arm/xm-netbsd.h ${xm_file}"
tmake_file="t-netbsd arm/t-netbsd"
use_collect2=yes
;;
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
tmake_file=pa/t-pa
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
-# if [[ x$enable_threads = x ]]; then
+# if test x$enable_threads = x; then
# enable_threads=$have_pthread_h
# fi
-# if [[ x$enable_threads = xyes ]]; then
+# if test x$enable_threads = xyes; then
# thread_file='dce'
# tmake_file="${tmake_file} pa/t-dce-thr"
# fi
tm_file="${tm_file} pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
xm_file=pa/xm-pahpux.h
xmake_file=pa/x-pa-hpux
- if [ x$gas = xyes ]
+ if test x$gas = xyes
then
tm_file="${tm_file} pa/pa-gas.h"
fi
-# if [[ x$enable_threads = x ]]; then
+# if test x$enable_threads = x; then
# enable_threads=$have_pthread_h
# fi
-# if [[ x$enable_threads = xyes ]]; then
+# if test x$enable_threads = xyes; then
# thread_file='dce'
# tmake_file="${tmake_file} pa/t-dce-thr"
# fi
gnu_ld=yes
gas=yes
elf=yes
- if [ x$enable_threads = xyes ]; then
+ if test x$enable_threads = xyes; then
thread_file='posix'
fi
;;
xmake_file=i386/x-aix
;;
i[34567]86-ncr-sysv4*) # NCR 3000 - ix86 running system V.4
- xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
+ xm_file="xm-alloca.h ${xm_file}"
xm_defines="USG POSIX SMALL_ARG_MAX"
xmake_file=i386/x-ncr3000
if test x$stabs = xyes -a x$gas = xyes
install_headers_dir=install-headers-cpio
;;
i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
- xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
+ xm_file="xm-alloca.h ${xm_file}"
xm_defines="USG POSIX SMALL_ARG_MAX"
xmake_file=x-svr4
tm_file=i386/ptx4-i.h
tmake_file="i386/t-i386bare t-rtems"
;;
i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
- xm_file="xm-siglist.h xm-alloca.h ${xm_file} i386/xm-sco5.h"
+ xm_file="xm-alloca.h ${xm_file} i386/xm-sco5.h"
xm_defines="USG SVR3"
xmake_file=i386/x-sco5
install_headers_dir=install-headers-cpio
;;
i[34567]86-*-sco3.2v4*) # 80386 running SCO 3.2v4 system
xm_file="${xm_file} i386/xm-sco.h"
- xm_defines="USG SVR3 BROKEN_LDEXP SMALL_ARG_MAX NO_SYS_SIGLIST"
+ xm_defines="USG SVR3 BROKEN_LDEXP SMALL_ARG_MAX"
xmake_file=i386/x-sco4
install_headers_dir=install-headers-cpio
if test x$stabs = xyes
truncate_target=yes
;;
i[34567]86-*-solaris2*)
- xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
+ xm_file="xm-alloca.h ${xm_file}"
xm_defines="USG POSIX SMALL_ARG_MAX"
tm_file=i386/sol2.h
if test x$gas = xyes; then
fi
;;
i[34567]86-*-sysv5*) # Intel x86 on System V Release 5
- xm_file="xm-alloca.h xm-siglist.h ${xm_file}"
+ xm_file="xm-alloca.h ${xm_file}"
xm_defines="USG POSIX"
tm_file=i386/sysv5.h
if test x$stabs = xyes
fi
;;
i[34567]86-*-sysv4*) # Intel 80386's running system V.4
- xm_file="xm-siglist.h xm-alloca.h ${xm_file}"
+ xm_file="xm-alloca.h ${xm_file}"
xm_defines="USG POSIX SMALL_ARG_MAX"
tm_file=i386/sysv4.h
if test x$stabs = xyes
extra_parts="crtbegin.o crtend.o"
;;
i[34567]86-*-udk*) # Intel x86 on SCO UW/OSR5 Dev Kit
- xm_file="xm-alloca.h xm-siglist.h ${xm_file}"
+ xm_file="xm-alloca.h ${xm_file}"
xm_defines="USG POSIX"
tm_file=i386/udk.h
tmake_file="i386/t-crtpic i386/t-udk"
i[34567]86-*-uwin*)
tm_file=i386/uwin.h
xm_file="${xm_file} i386/xm-uwin.h"
- xm_defines="USG NO_STAB_H NO_SYS_SIGLIST"
+ xm_defines="USG NO_STAB_H"
tmake_file="i386/t-cygwin i386/t-uwin"
extra_objs=winnt.o
xmake_file=i386/x-cygwin
i[34567]86-*-interix*)
tm_file="i386/i386-interix.h interix.h"
xm_file="i386/xm-i386-interix.h xm-interix.h"
- xm_defines="USG NO_SYS_SIGLIST"
+ xm_defines="USG"
tmake_file="i386/t-interix"
extra_objs=interix.o
xmake_file=x-interix
fi
;;
i[34567]86-dg-dgux*)
- xm_file="xm-alloca.h xm-siglist.h ${xm_file}"
+ xm_file="xm-alloca.h ${xm_file}"
xm_defines="USG POSIX"
out_file=i386/dgux.c
tm_file=i386/dgux.h
;;
m68000-hp-hpux*) # HP 9000 series 300
xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG NO_SYS_SIGLIST"
+ xm_defines="USG"
if test x$gas = xyes
then
xmake_file=m68k/x-hp320g
m68k-motorola-sysv*)
tm_file=m68k/mot3300.h
xm_file="xm-alloca.h m68k/xm-mot3300.h ${xm_file}"
- xm_defines=NO_SYS_SIGLIST
if test x$gas = xyes
then
xmake_file=m68k/x-mot3300-gas
;;
m68k-hp-hpux7*) # HP 9000 series 300 running HPUX version 7.
xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG NO_SYS_SIGLIST"
+ xm_defines="USG"
if test x$gas = xyes
then
xmake_file=m68k/x-hp320g
;;
m68k-hp-hpux*) # HP 9000 series 300
xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG NO_SYS_SIGLIST"
+ xm_defines="USG"
if test x$gas = xyes
then
xmake_file=m68k/x-hp320g
extra_headers=math-68881.h
float_format=m68k
;;
- m68k-*-rtemscoff*|m68k-*-rtems*)
+ m68k-*-rtemscoff*)
tmake_file="m68k/t-m68kbare t-rtems"
tm_file=m68k/rtems.h
extra_headers=math-68881.h
float_format=m68k
;;
- m68k-*-rtemself*)
+ m68k-*-rtemself*|m68k-*-rtems*)
tmake_file="m68k/t-m68kbare t-rtems m68k/t-crtstuff"
tm_file=m68k/rtemself.h
extra_headers=math-68881.h
;;
mips*-*-linux*) # Linux MIPS, either endian.
xmake_file=x-linux
- xm_file="xm-siglist.h ${xm_file}"
case $machine in
mipsel-*) tm_file="mips/elfl.h mips/linux.h" ;;
*) tm_file="mips/elf.h mips/linux.h" ;;
if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
- xm_file="xm-siglist.h ${xm_file}"
xm_defines=USG
if test x$gas = xyes
then
if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
- xm_file="xm-siglist.h ${xm_file}"
xm_defines=USG
xmake_file=mips/x-sysv
if test x$gas = xyes
if test x$stabs = xyes; then
tm_file="${tm_file} dbx.h"
fi
- xm_file="xm-siglist.h ${xm_file}"
xmake_file=mips/x-sysv
if test x$gas = xyes
then
;;
mips64orion-*-rtems*)
tm_file="mips/elforion.h mips/elf64.h mips/rtems64.h"
- tm_file="mips/elforion.h mips/elf64.h mips/rtems64.h"
tmake_file="mips/t-elf t-rtems"
;;
mipstx39el-*-elf*)
fi
;;
mn10200-*-*)
+ float_format=i32
cpu_type=mn10200
tm_file="mn10200/mn10200.h"
if test x$stabs = xyes
# xmake_file=pyr/x-pyr
# use_collect2=yes
# ;;
+
+ pj*-linux*)
+ tm_file="svr4.h pj/linux.h ${tm_file}"
+ ;;
+ pj-*)
+ ;;
+ pjl-*)
+ tm_file="svr4.h pj/pjl.h ${tm_file}"
+ ;;
+
romp-*-aos*)
use_collect2=yes
;;
;;
powerpc-*-sysv* | powerpc-*-elf*)
tm_file=rs6000/sysv4.h
- xm_file="xm-siglist.h rs6000/xm-sysv4.h"
+ xm_file="rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
extra_headers=ppc-asm.h
if test x$gas = xyes
;;
powerpc-*-linux-gnu*)
tm_file=rs6000/linux.h
- xm_file="xm-siglist.h rs6000/xm-sysv4.h"
+ xm_file="rs6000/xm-sysv4.h"
xm_defines="USG ${xm_defines}"
out_file=rs6000/rs6000.c
if test x$gas = xyes
;;
powerpc-wrs-vxworks*)
cpu_type=rs6000
- xm_file="xm-siglist.h rs6000/xm-sysv4.h"
+ xm_file="rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
tm_file=rs6000/vxppc.h
tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
;;
powerpcle-*-sysv* | powerpcle-*-elf*)
tm_file=rs6000/sysv4le.h
- xm_file="xm-siglist.h rs6000/xm-sysv4.h"
+ xm_file="rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
if test x$gas = xyes
then
;;
powerpcle-*-solaris2*)
tm_file=rs6000/sol2.h
- xm_file="xm-siglist.h rs6000/xm-sysv4.h"
+ xm_file="rs6000/xm-sysv4.h"
xm_defines="USG POSIX"
if test x$gas = xyes
then
tmake_file=sparc/t-sunos41
xmake_file=x-lynx
;;
+ sparc-*-rtemsaout*)
+ tmake_file="sparc/t-sparcbare t-rtems"
+ tm_file=sparc/rtems.h
sparc-*-rtems*|sparc-*-rtemself*)
tm_file="sparc/rtemself.h"
tmake_file="sparc/t-elf t-rtems"
#float_format=i128
float_format=i64
;;
- sparc-*-rtemsaout*)
- tmake_file="sparc/t-sparcbare t-rtems"
- tm_file=sparc/rtems.h
;;
sparcv9-*-solaris2*)
- tm_file=sparc/sol2-sld-64.h
+ if test x$gnu_ld = xyes
+ then
+ tm_file=sparc/sol2-64.h
+ else
+ tm_file=sparc/sol2-sld-64.h
+ fi
xm_file="sparc/xm-sysv4-64.h sparc/xm-sol2.h"
xm_defines="USG POSIX"
tmake_file="sparc/t-sol2 sparc/t-sol2-64"
fi
;;
sparc-hal-solaris2*)
- xm_file="xm-siglist.h sparc/xm-sysv4.h sparc/xm-sol2.h"
+ xm_file="sparc/xm-sysv4.h sparc/xm-sol2.h"
xm_defines="USG POSIX"
tm_file="sparc/sol2.h sparc/hal.h"
tmake_file="sparc/t-halos sparc/t-sol2"
else
tm_file=sparc/sol2-sld.h
fi
- xm_file="xm-siglist.h sparc/xm-sysv4.h sparc/xm-sol2.h"
+ xm_file="sparc/xm-sysv4.h sparc/xm-sol2.h"
xm_defines="USG POSIX"
tmake_file=sparc/t-sol2
xmake_file=sparc/x-sysv4
extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
case $machine in
- *-*-solaris2.[0-6]*) ;;
+ *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) ;;
*-*-solaris2*)
- tm_file=sparc/sol2-sld-64.h
+ if test x$gnu_ld = xyes
+ then
+ tm_file=sparc/sol2-64.h
+ else
+ tm_file=sparc/sol2-sld-64.h
+ fi
tmake_file="$tmake_file sparc/t-sol2-64"
;;
esac
;;
sparc-*-sysv4*)
tm_file=sparc/sysv4.h
- xm_file="xm-siglist.h sparc/xm-sysv4.h"
+ xm_file="sparc/xm-sysv4.h"
xm_defines="USG POSIX"
tmake_file=t-svr4
xmake_file=sparc/x-sysv4
extra_parts="crtbegin.o crtend.o"
;;
sparc-*-vxsim*)
- xm_file="xm-siglist.h sparc/xm-sysv4.h sparc/xm-sol2.h"
+ xm_file="sparc/xm-sysv4.h sparc/xm-sol2.h"
xm_defines="USG POSIX"
tm_file=sparc/vxsim.h
tmake_file=sparc/t-vxsparc
# cpu_type=gmicro
# use_collect2=yes
# ;;
+ v850-*-rtems*)
+ cpu_type=v850
+ tm_file="v850/rtems.h"
+ xm_file="v850/xm-v850.h"
+ tmake_file="v850/t-v850 t-rtems"
+ if test x$stabs = xyes
+ then
+ tm_file="${tm_file} dbx.h"
+ fi
+ use_collect2=no
+ ;;
v850-*-*)
target_cpu_default="TARGET_CPU_generic"
cpu_type=v850
;;
alpha*-*-*)
case $machine in
+ alphaev6[78]*)
+ target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX|MASK_CIX"
+ ;;
alphaev6*)
target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX"
;;
echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:6655: checking for strerror in -lcposix" >&5
+echo "configure:6688: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6663 "configure"
+#line 6696 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:6674: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6707: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:6697: checking for working const" >&5
+echo "configure:6730: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6702 "configure"
+#line 6735 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:6751: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6784: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:6772: checking for inline" >&5
+echo "configure:6805: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 6779 "configure"
+#line 6812 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:6786: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6819: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:6812: checking for off_t" >&5
+echo "configure:6845: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6817 "configure"
+#line 6850 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:6845: checking for size_t" >&5
+echo "configure:6878: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6850 "configure"
+#line 6883 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:6880: checking for working alloca.h" >&5
+echo "configure:6913: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6885 "configure"
+#line 6918 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:6892: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6925: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:6913: checking for alloca" >&5
+echo "configure:6946: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6918 "configure"
+#line 6951 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:6946: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:6978: checking whether alloca needs Cray hooks" >&5
+echo "configure:7011: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6983 "configure"
+#line 7016 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7008: checking for $ac_func" >&5
+echo "configure:7041: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7013 "configure"
+#line 7046 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7069: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:7063: checking stack direction for C alloca" >&5
+echo "configure:7096: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 7071 "configure"
+#line 7104 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:7090: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7117: checking for $ac_hdr" >&5
+echo "configure:7150: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7122 "configure"
+#line 7155 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7127: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7160: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
strdup __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7157: checking for $ac_func" >&5
+echo "configure:7190: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7162 "configure"
+#line 7195 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7214: checking for $ac_func" >&5
+echo "configure:7247: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7219 "configure"
+#line 7252 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7242: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:7276: checking for LC_MESSAGES" >&5
+echo "configure:7309: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7281 "configure"
+#line 7314 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:7288: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7321: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:7309: checking whether NLS is requested" >&5
+echo "configure:7342: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:7329: checking whether included gettext is requested" >&5
+echo "configure:7362: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:7348: checking for libintl.h" >&5
+echo "configure:7381: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7353 "configure"
+#line 7386 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7358: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7391: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:7375: checking for gettext in libc" >&5
+echo "configure:7408: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7380 "configure"
+#line 7413 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:7387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:7403: checking for bindtextdomain in -lintl" >&5
+echo "configure:7436: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7411 "configure"
+#line 7444 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:7422: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:7438: checking for gettext in libintl" >&5
+echo "configure:7471: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:7443: checking for gettext in -lintl" >&5
+echo "configure:7476: checking for gettext in -lintl" >&5
ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7451 "configure"
+#line 7484 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gettext()
; return 0; }
EOF
-if { (eval echo configure:7462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7501: checking for $ac_word" >&5
+echo "configure:7534: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7535: checking for $ac_func" >&5
+echo "configure:7568: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7540 "configure"
+#line 7573 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7590: checking for $ac_word" >&5
+echo "configure:7623: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7626: checking for $ac_word" >&5
+echo "configure:7659: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 7658 "configure"
+#line 7691 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:7666: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7699: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
if test "$CATOBJEXT" = "NONE"; then
echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:7689: checking whether catgets can be used" >&5
+echo "configure:7722: checking whether catgets can be used" >&5
# Check whether --with-catgets or --without-catgets was given.
if test "${with_catgets+set}" = set; then
withval="$with_catgets"
if test "$nls_cv_use_catgets" = "yes"; then
echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:7702: checking for main in -li" >&5
+echo "configure:7735: checking for main in -li" >&5
ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-li $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7710 "configure"
+#line 7743 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:7717: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7750: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:7745: checking for catgets" >&5
+echo "configure:7778: checking for catgets" >&5
if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7750 "configure"
+#line 7783 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char catgets(); below. */
; return 0; }
EOF
-if { (eval echo configure:7773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7806: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_catgets=yes"
else
# Extract the first word of "gencat", so it can be a program name with args.
set dummy gencat; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7795: checking for $ac_word" >&5
+echo "configure:7828: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7831: checking for $ac_word" >&5
+echo "configure:7864: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7868: checking for $ac_word" >&5
+echo "configure:7901: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7903: checking for $ac_word" >&5
+echo "configure:7936: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7961: checking for $ac_word" >&5
+echo "configure:7994: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7995: checking for $ac_word" >&5
+echo "configure:8028: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8031: checking for $ac_word" >&5
+echo "configure:8064: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:8124: checking for catalogs to be installed" >&5
+echo "configure:8157: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:8152: checking for linux/version.h" >&5
+echo "configure:8185: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8157 "configure"
+#line 8190 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8162: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8195: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:8237: checking whether windows registry support is requested" >&5
+echo "configure:8270: checking whether windows registry support is requested" >&5
if test x$enable_win32_registry != xno; then
cat >> confdefs.h <<\EOF
#define ENABLE_WIN32_REGISTRY 1
if test x$enable_win32_registry != xno; then
echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:8266: checking registry key on windows hosts" >&5
+echo "configure:8299: checking registry key on windows hosts" >&5
cat >> confdefs.h <<EOF
#define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
EOF
# Figure out what assembler alignment features are present.
echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:8442: checking assembler alignment features" >&5
+echo "configure:8475: checking assembler alignment features" >&5
gcc_cv_as=
gcc_cv_as_alignment_features=
gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:8563: checking assembler subsection support" >&5
+echo "configure:8596: checking assembler subsection support" >&5
gcc_cv_as_subsections=
if test x$gcc_cv_as != x; then
# Check if we have .subsection
case "$target" in
sparc*-*-*)
echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:8605: checking assembler .register pseudo-op support" >&5
- gcc_cv_as_register_pseudo_op=
- if test x$gcc_cv_as != x; then
- # Check if we have .register
- echo ".register %g2, #scratch" > conftest.s
- if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
+echo "configure:8638: checking assembler .register pseudo-op support" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ gcc_cv_as_register_pseudo_op=unknown
+ if test x$gcc_cv_as != x; then
+ # Check if we have .register
+ echo ".register %g2, #scratch" > conftest.s
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
gcc_cv_as_register_pseudo_op=yes
- cat >> confdefs.h <<\EOF
+ else
+ gcc_cv_as_register_pseudo_op=no
+ fi
+ rm -f conftest.s conftest.o
+ fi
+
+fi
+
+echo "$ac_t""$gcc_cv_as_register_pseudo_op" 1>&6
+ if test "x$gcc_cv_as_register_pseudo_op" = xyes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_REGISTER_PSEUDO_OP 1
EOF
- fi
- rm -f conftest.s conftest.o
fi
- echo "$ac_t""$gcc_cv_as_register_pseudo_op" 1>&6
- echo $ac_n "checking assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:8622: checking assembler offsetable %lo() support" >&5
- gcc_cv_as_offsetable_lo10=
- if test x$gcc_cv_as != x; then
- # Check if assembler has offsetable %lo()
- echo "or %g1, %lo(ab) + 12, %g1" > conftest.s
- echo "or %g1, %lo(ab + 12), %g1" > conftest1.s
- gcc_cv_as_flags64="-xarch=v9"
- if $gcc_cv_as $gcc_cv_as_flags64 -o conftest.o conftest.s > /dev/null 2>&1; then
- :
- else
- gcc_cv_as_flags64="-64"
- if $gcc_cv_as $gcc_cv_as_flags64 -o conftest.o conftest.s > /dev/null 2>&1; then
- :
- else
- gcc_cv_as_flags64=""
+ case "$tm_file" in
+ *64*)
+ echo $ac_n "checking for 64 bit support in assembler ($gcc_cv_as)""... $ac_c" 1>&6
+echo "configure:8668: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_flags64'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ if test -n "$gcc_cv_as"; then
+ echo ".xword foo" > conftest.s
+ gcc_cv_as_flags64=no
+ for flag in "-xarch=v9" "-64 -Av9"; do
+ if $gcc_cv_as $flag -o conftest.o conftest.s \
+ > /dev/null 2>&1; then
+ gcc_cv_as_flags64=$flag
+ break
+ fi
+ done
+ rm -f conftest.s conftest.o
+ else
+ if test "$gas" = yes; then
+ gcc_cv_as_flags64="-64 -Av9"
+ else
+ gcc_cv_as_flags64="-xarch=v9"
+ fi
fi
+
+fi
+
+echo "$ac_t""$gcc_cv_as_flags64" 1>&6
+ if test "x$gcc_cv_as_flags64" = xno; then
+
+ tmake_file=`echo " $tmake_file " | sed -e 's, sparc/t-sol2-64 , ,' -e 's,^ ,,' -e 's, $,,'`
+ dep_tmake_file=`echo " $dep_tmake_file " | sed -e 's, [^ ]*/config/sparc/t-sol2-64 , ,' -e 's,^ ,,' -e 's, $,,'`
+
+ else
+ cat >> confdefs.h <<EOF
+#define AS_SPARC64_FLAG "$gcc_cv_as_flags64"
+EOF
+
fi
- if test -n "$gcc_cv_as_flags64" ; then
- if $gcc_cv_as $gcc_cv_as_flags64 -o conftest1.o conftest1.s > /dev/null 2>&1; then
- if cmp conftest.o conftest1.o > /dev/null 2>&1; then
- :
- else
- gcc_cv_as_offsetable_lo10=yes
- cat >> confdefs.h <<\EOF
+ ;;
+ *) gcc_cv_as_flags64=${gcc_cv_as_flags64-no}
+ ;;
+ esac
+
+ if test "x$gcc_cv_as_flags64" != xno; then
+ echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
+echo "configure:8713: checking for assembler offsetable %lo() support" >&5
+if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ gcc_cv_as_offsetable_lo10=unknown
+ if test "x$gcc_cv_as" != x; then
+ # Check if assembler has offsetable %lo()
+ echo "or %g1, %lo(ab) + 12, %g1" > conftest.s
+ echo "or %g1, %lo(ab + 12), %g1" > conftest1.s
+ if $gcc_cv_as $gcc_cv_as_flags64 -o conftest.o conftest.s \
+ > /dev/null 2>&1 &&
+ $gcc_cv_as $gcc_cv_as_flags64 -o conftest1.o conftest1.s \
+ > /dev/null 2>&1; then
+ if cmp conftest.o conftest1.o > /dev/null 2>&1; then
+ gcc_cv_as_offsetable_lo10=no
+ else
+ gcc_cv_as_offsetable_lo10=yes
+ fi
+ else
+ gcc_cv_as_offsetable_lo10=no
+ fi
+ rm -f conftest.s conftest.o conftest1.s conftest1.o
+ fi
+
+fi
+
+echo "$ac_t""$gcc_cv_as_offsetable_lo10" 1>&6
+ if test "x$gcc_cv_as_offsetable_lo10" = xyes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_AS_OFFSETABLE_LO10 1
EOF
- fi
- fi
fi
- rm -f conftest.s conftest.o conftest1.s conftest1.o
fi
- echo "$ac_t""$gcc_cv_as_offsetable_lo10" 1>&6
;;
i[34567]86-*-*)
echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:8659: checking assembler instructions" >&5
+echo "configure:8752: checking assembler instructions" >&5
gcc_cv_as_instructions=
if test x$gcc_cv_as != x; then
set "filds fists" "filds mem; fists mem"