extra_parts
extra_objs
extra_headers_list
+user_headers_inc_next_post
+user_headers_inc_next_pre
extra_gcc_objs
TM_MULTILIB_EXCEPTIONS_CONFIG
TM_MULTILIB_CONFIG
build_exeext
all_selected_languages
all_languages
-all_lang_makefiles
all_lang_makefrags
all_gtfiles
all_compilers
enable_secureplt
enable_leading_mingw64_underscores
enable_cld
+enable_frame_pointer
enable_win32_registry
enable_static
with_pic
--enable-leading-mingw64-underscores
Enable leading underscores on 64 bit mingw targets
--enable-cld enable -mcld by default for 32bit x86
+ --enable-frame-pointer enable -fno-omit-frame-pointer by default for 32bit x86
--disable-win32-registry
disable lookup of installation paths in the
Registry on Windows hosts
# Enable C extension for decimal float if target supports it.
+
# Check whether --enable-decimal-float was given.
if test "${enable_decimal_float+set}" = set; then :
enableval=$enable_decimal_float;
else
case $target in
- powerpc*-*-linux* | i?86*-*-linux* | x86_64*-*-linux*)
+ powerpc*-*-linux* | i?86*-*-linux* | x86_64*-*-linux* | s390*-*-linux*)
enable_decimal_float=yes
;;
*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: decimal float is not supported for this target" >&5
-$as_echo "$as_me: WARNING: decimal float is not supported for this target" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: decimal float is not supported for this target, ignored" >&5
+$as_echo "$as_me: WARNING: decimal float is not supported for this target, ignored" >&2;}
enable_decimal_float=no
;;
esac
fi
-dfp=`if test $enable_decimal_float != no; then echo 1; else echo 0; fi`
-
-cat >>confdefs.h <<_ACEOF
-#define ENABLE_DECIMAL_FLOAT $dfp
-_ACEOF
-
-
# x86's use BID format instead of DPD
case x$enable_decimal_float in
xyes)
case $target in
- i?86*-*-linux* | x86_64*-*-linux*)
+ i?86*-*-* | x86_64*-*-*)
enable_decimal_float=bid
;;
*)
esac
+
+
+dfp=`if test $enable_decimal_float != no; then echo 1; else echo 0; fi`
+
+cat >>confdefs.h <<_ACEOF
+#define ENABLE_DECIMAL_FLOAT $dfp
+_ACEOF
+
+
bid=`if test $enable_decimal_float = bid; then echo 1; else echo 0; fi`
cat >>confdefs.h <<_ACEOF
mips*-*-*)
case $host in
mips*-sgi-irix*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: fixed-point is not supported on IRIX" >&5
-$as_echo "$as_me: WARNING: fixed-point is not supported on IRIX" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: fixed-point is not supported on IRIX, ignored" >&5
+$as_echo "$as_me: WARNING: fixed-point is not supported on IRIX, ignored" >&2;}
enable_fixed_point=no
;;
*)
esac
;;
*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: fixed-point is not supported for this target" >&5
-$as_echo "$as_me: WARNING: fixed-point is not supported for this target" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: fixed-point is not supported for this target, ignored" >&5
+$as_echo "$as_me: WARNING: fixed-point is not supported for this target, ignored" >&2;}
enable_fixed_point=no
;;
esac
# NM
if test x${build} = x${host} && test -f $srcdir/../binutils/nm.c \
&& test -d ../binutils ; then
- NM='$(objdir)/../binutils/nm-new'
+ NM='${objdir}/../binutils/nm-new'
else
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
# AR
if test x${build} = x${host} && test -f $srcdir/../binutils/ar.c \
&& test -d ../binutils ; then
- AR='$(objdir)/../binutils/ar'
+ AR='${objdir}/../binutils/ar'
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
fi
+# Check whether --enable-frame-pointer was given.
+if test "${enable_frame_pointer+set}" = set; then :
+ enableval=$enable_frame_pointer;
+else
+
+case $target_os in
+linux* | darwin[8912]*)
+ # Enable -fomit-frame-pointer by default for Linux and Darwin with
+ # DWARF2.
+ enable_frame_pointer=no
+ ;;
+*)
+ enable_frame_pointer=yes
+ ;;
+esac
+
+fi
+
+
# Windows32 Registry support for specifying GCC installation paths.
# Check whether --enable-win32-registry was given.
if test "${enable_win32_registry+set}" = set; then :
out_object_file=`basename $out_file .c`.o
tm_file_list="options.h"
-tm_include_list="options.h"
+tm_include_list="options.h insn-constants.h"
for f in $tm_file; do
case $f in
./* )
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 17111 "configure"
+#line 17136 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 17217 "configure"
+#line 17242 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; }
then
- gcc_cv_as_hidden=yes
+
+# Solaris 9/x86 as incorrectly emits an alias for a hidden symbol with
+# STV_HIDDEN, so disable .hidden support if so.
+case "${target}" in
+ i?86-*-solaris2*)
+ if test x$gcc_cv_as != x && test x$gcc_cv_objdump != x; then
+ cat > conftest.s <<EOF
+.globl hidden
+ .hidden hidden
+hidden:
+.globl default
+ .set default,hidden
+EOF
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1 \
+ && $gcc_cv_objdump -t conftest.o 2>/dev/null | \
+ grep '\.hidden default' > /dev/null; then
+ gcc_cv_as_hidden=no
+ else
+ gcc_cv_as_hidden=yes
+ fi
+ else
+ # Assume bug is present if objdump is missing.
+ gcc_cv_as_hidden=no
+ fi
+ ;;
+ *)
+ gcc_cv_as_hidden=yes
+ ;;
+esac
else
echo "configure: failed program was" >&5
cat conftest.s >&5
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_cfi_directive" >&5
$as_echo "$gcc_cv_as_cfi_directive" >&6; }
-if test $gcc_cv_as_cfi_directive = yes && test x$gcc_cv_readelf != x; then
+if test $gcc_cv_as_cfi_directive = yes && test x$gcc_cv_objdump != x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for working cfi advance" >&5
$as_echo_n "checking assembler for working cfi advance... " >&6; }
if test "${gcc_cv_as_cfi_advance_working+set}" = set; then :
test $ac_status = 0; }; }
then
-if $gcc_cv_readelf -wf conftest.o 2>/dev/null \
+if $gcc_cv_objdump -Wf conftest.o 2>/dev/null \
| grep 'DW_CFA_advance_loc[24]:[ ][ ]*75040[ ]' >/dev/null; then
gcc_cv_as_cfi_advance_working=yes
fi
$as_echo "$gcc_cv_as_cfi_advance_working" >&6; }
else
- # no readelf, err on the side of caution
+ # no objdump, err on the side of caution
gcc_cv_as_cfi_advance_working=no
fi
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; }
then
- gcc_cv_as_cfi_sections_directive=yes
+ case $target_os in
+ win32 | pe | cygwin* | mingw32* | uwin*)
+ # Need to check that we generated the correct relocation for the
+ # .debug_frame section. This was fixed for binutils 2.21.
+ gcc_cv_as_cfi_sections_directive=no
+ if test "x$gcc_cv_objdump" != x; then
+ if $gcc_cv_objdump -j .debug_frame -r conftest.o 2>/dev/null | \
+ grep secrel > /dev/null; then
+ gcc_cv_as_cfi_sections_directive=yes
+ fi
+ fi
+ ;;
+ *)
+ gcc_cv_as_cfi_sections_directive=yes
+ ;;
+esac
else
echo "configure: failed program was" >&5
cat conftest.s >&5
;;
i[34567]86-*-*)
case "$target" in
- i[34567]86-*-solaris2.[89]*)
- # TLS was introduced in the Solaris 9 4/04 release but
- # we do not enable it by default on Solaris 9 either.
- if test "x$enable_tls" = xyes ; then
- on_solaris=yes
- else
- enable_tls=no;
- fi
- ;;
i[34567]86-*-solaris2.*)
on_solaris=yes
+ tga_func=___tls_get_addr
;;
*)
on_solaris=no
;;
sparc*-*-*)
case "$target" in
- sparc*-sun-solaris2.[89]*)
- # TLS was introduced in the Solaris 9 4/04 release but
- # we do not enable it by default on Solaris 9 either.
- if test "x$enable_tls" = xyes ; then
- on_solaris=yes
- else
- enable_tls=no;
- fi
- ;;
sparc*-sun-solaris2.*)
on_solaris=yes
+ tga_func=__tls_get_addr
;;
*)
on_solaris=no
esac
if test x$on_solaris = xyes && test x$gas_flag = xno; then
conftest_s='
- .section ".tdata",#alloc,#write,#tls
-foo: .long 25
- .text
- sethi %tgd_hi22(foo), %o0
- add %o0, %tgd_lo10(foo), %o1
- add %l7, %o1, %o0, %tgd_add(foo)
- call __tls_get_addr, %tgd_call(foo)
- sethi %tldm_hi22(foo), %l1
- add %l1, %tldm_lo10(foo), %l2
- add %l7, %l2, %o0, %tldm_add(foo)
- call __tls_get_addr, %tldm_call(foo)
- sethi %tldo_hix22(foo), %l3
- xor %l3, %tldo_lox10(foo), %l4
- add %o0, %l4, %l5, %tldo_add(foo)
- sethi %tie_hi22(foo), %o3
- add %o3, %tie_lo10(foo), %o3
- ld [%l7 + %o3], %o2, %tie_ld(foo)
- add %g7, %o2, %o4, %tie_add(foo)
- sethi %tle_hix22(foo), %l1
- xor %l1, %tle_lox10(foo), %o5
- ld [%g7 + %o5], %o1'
+ .section ".tdata",#alloc,#write,#tls'
tls_first_major=0
tls_first_minor=0
else
conftest_s='
- .section ".tdata","awT",@progbits
+ .section ".tdata","awT",@progbits'
+ tls_first_major=2
+ tls_first_minor=14
+ tls_as_opt="-32 --fatal-warnings"
+ fi
+ conftest_s="$conftest_s
foo: .long 25
.text
sethi %tgd_hi22(foo), %o0
add %g7, %o2, %o4, %tie_add(foo)
sethi %tle_hix22(foo), %l1
xor %l1, %tle_lox10(foo), %o5
- ld [%g7 + %o5], %o1'
- tls_first_major=2
- tls_first_minor=14
- tls_as_opt="-32 --fatal-warnings"
- fi
+ ld [%g7 + %o5], %o1"
;;
xtensa*-*-*)
conftest_s='
set_have_as_tls=yes
fi
fi
+case "$target" in
+ # TLS was introduced in the Solaris 9 FCS release and backported to
+ # Solaris 8 patches. Support for GNU-style TLS on x86 was only
+ # introduced in Solaris 9 4/04, replacing the earlier Sun style that Sun
+ # ld and GCC don't support any longer.
+ *-*-solaris2.*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking linker and ld.so.1 TLS support" >&5
+$as_echo_n "checking linker and ld.so.1 TLS support... " >&6; }
+ ld_tls_support=no
+ # Check ld and ld.so.1 TLS support.
+ if echo "$ld_ver" | grep GNU > /dev/null; then
+ # Assume all interesting versions of GNU ld have TLS support.
+ # FIXME: still need ld.so.1 support, i.e. ld version checks below.
+ ld_tls_support=yes
+ else
+ case "$target" in
+ # Solaris 8/x86 ld has GNU style TLS support since version 1.280.
+ i?86-*-solaris2.8)
+ min_tls_ld_vers_minor=280
+ ;;
+ # Solaris 8/SPARC ld has TLS support since version 1.272.
+ sparc*-*-solaris2.8)
+ min_tls_ld_vers_minor=272
+ ;;
+ # Solaris 9/x86 ld has GNU style TLS support since version 1.374.
+ i?86-*-solaris2.9)
+ min_tls_ld_vers_minor=374
+ ;;
+ # Solaris 9/SPARC and Solaris 10+ ld have TLS support since FCS.
+ sparc*-*-solaris2.9 | *-*-solaris2.1[0-9]*)
+ min_tls_ld_vers_minor=343
+ ;;
+ esac
+ if test "$ls_vers_major" -gt 1 || \
+ test "$ld_vers_minor" -ge "$min_tls_ld_vers_minor"; then
+ ld_tls_support=yes
+ else
+ set_have_as_tls=no
+ fi
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_tls_support" >&5
+$as_echo "$ld_tls_support" >&6; }
+
+ save_LIBS="$LIBS"
+ save_LDFLAGS="$LDFLAGS"
+ LIBS=
+ LDFLAGS=
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking alternate thread library" >&5
+$as_echo_n "checking alternate thread library... " >&6; }
+ case "$target" in
+ # TLS support was backported to Solaris 8 patches, but only lives in
+ # the alternate thread library which became the default in Solaris 9.
+ # We want to always use that, irrespective of TLS support.
+ *-*-solaris2.8)
+ # Take multilib subdir into account. There's no spec to handle
+ # this. The 64 symlink exists since Solaris 8.
+ lwp_dir=/usr/lib/lwp
+ lwp_spec="-L$lwp_dir%{m64:/64} -R$lwp_dir%{m64:/64}"
+ LDFLAGS="-L$lwp_dir -R$lwp_dir"
+ ;;
+ *-*-solaris2*)
+ lwp_dir="none"
+ lwp_spec=""
+ ;;
+ esac
+ # Always define LIB_THREAD_LDFLAGS_SPEC, even without TLS support.
+
+cat >>confdefs.h <<_ACEOF
+#define LIB_THREAD_LDFLAGS_SPEC "$lwp_spec"
+_ACEOF
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lwp_dir" >&5
+$as_echo "$lwp_dir" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking library containing $tga_func" >&5
+$as_echo_n "checking library containing $tga_func... " >&6; }
+ # Before Solaris 10, __tls_get_addr (SPARC/x64) resp. ___tls_get_addr
+ # (32-bit x86) only lived in libthread, so check for that. Keep
+ # set_have_as_tls if found, disable if not.
+ as_ac_Search=`$as_echo "ac_cv_search_$tga_func" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing $tga_func" >&5
+$as_echo_n "checking for library containing $tga_func... " >&6; }
+if { as_var=$as_ac_Search; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $tga_func ();
+int
+main ()
+{
+return $tga_func ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' thread; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ eval "$as_ac_Search=\$ac_res"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if { as_var=$as_ac_Search; eval "test \"\${$as_var+set}\" = set"; }; then :
+ break
+fi
+done
+if { as_var=$as_ac_Search; eval "test \"\${$as_var+set}\" = set"; }; then :
+
+else
+ eval "$as_ac_Search=no"
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+eval ac_res=\$$as_ac_Search
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+eval ac_res=\$$as_ac_Search
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+else
+ set_have_as_tls=no
+fi
+
+ # Clear LIBS if we cannot support TLS.
+ if test $set_have_as_tls = no; then
+ LIBS=
+ fi
+ # Always define LIB_TLS_SPEC, even without TLS support.
+
+cat >>confdefs.h <<_ACEOF
+#define LIB_TLS_SPEC "$LIBS"
+_ACEOF
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBS" >&5
+$as_echo "$LIBS" >&6; }
+
+ LIBS="$save_LIBS"
+ LDFLAGS="$save_LDFLAGS"
+ ;;
+esac
if test $set_have_as_tls = yes ; then
$as_echo "#define HAVE_AS_TLS 1" >>confdefs.h
fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for .quad directive" >&5
+$as_echo_n "checking assembler for .quad directive... " >&6; }
+if test "${gcc_cv_as_ix86_quad+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_quad=no
+ if test x$gcc_cv_as != x; then
+ echo '.quad 0' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_quad=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_quad" >&5
+$as_echo "$gcc_cv_as_ix86_quad" >&6; }
+if test $gcc_cv_as_ix86_quad = yes; then
+
+$as_echo "#define HAVE_AS_IX86_QUAD 1" >>confdefs.h
+
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for sahf mnemonic" >&5
$as_echo_n "checking assembler for sahf mnemonic... " >&6; }
if test "${gcc_cv_as_ix86_sahf+set}" = set; then :
else
gcc_cv_as_ix86_sahf=no
if test x$gcc_cv_as != x; then
- echo 'sahf' > conftest.s
+ echo '.code64
+ sahf' > conftest.s
if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
(eval $ac_try) 2>&5
fi
- # This one is used unconditionally by i386.[ch]; it is to be defined
+ # These two are used unconditionally by i386.[ch]; it is to be defined
# to 1 if the feature is present, 0 otherwise.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for GOTOFF in data" >&5
$as_echo_n "checking assembler for GOTOFF in data... " >&6; }
#define HAVE_AS_GOTOFF_IN_DATA `if test $gcc_cv_as_ix86_gotoff_in_data = yes; then echo 1; else echo 0; fi`
_ACEOF
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for rep and lock prefix" >&5
+$as_echo_n "checking assembler for rep and lock prefix... " >&6; }
+if test "${gcc_cv_as_ix86_rep_lock_prefix+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_as_ix86_rep_lock_prefix=no
+ if test x$gcc_cv_as != x; then
+ echo 'rep movsl
+ lock addl %edi, (%eax,%esi)
+ lock orl $0, (%esp)' > conftest.s
+ if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }
+ then
+ gcc_cv_as_ix86_rep_lock_prefix=yes
+ else
+ echo "configure: failed program was" >&5
+ cat conftest.s >&5
+ fi
+ rm -f conftest.o conftest.s
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_ix86_rep_lock_prefix" >&5
+$as_echo "$gcc_cv_as_ix86_rep_lock_prefix" >&6; }
+if test $gcc_cv_as_ix86_rep_lock_prefix = yes; then
+
+$as_echo "#define HAVE_AS_IX86_REP_LOCK_PREFIX 1" >>confdefs.h
+
+fi
+
;;
ia64*-*-*)
echo ' .end x' >> conftest.s
if $gcc_cv_as -o conftest.o conftest.s >/dev/null 2>&5 \
&& $gcc_cv_ld -shared -o conftest.so conftest.o >/dev/null 2>&5; then
- if $gcc_cv_objdump -d conftest.so | grep -q jalr \
- && $gcc_cv_objdump -d conftest.so | grep -q "bal.*<x>"; then
+ if $gcc_cv_objdump -d conftest.so | grep jalr >/dev/null 2>&1 \
+ && $gcc_cv_objdump -d conftest.so | grep "bal.*<x>" >/dev/null 2>&1; then
gcc_cv_as_ld_jalr_reloc=yes
fi
fi
$as_echo "#define HAVE_LD_NO_DOT_SYMS 1" >>confdefs.h
fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking linker large toc support" >&5
+$as_echo_n "checking linker large toc support... " >&6; }
+if test "${gcc_cv_ld_large_toc+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_ld_large_toc=no
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 21 -o "$gcc_cv_gld_major_version" -gt 2; then
+ gcc_cv_ld_large_toc=yes
+ fi
+ elif test x$gcc_cv_as != x -a x$gcc_cv_ld != x ; then
+ cat > conftest.s <<EOF
+ .section ".tbss","awT",@nobits
+ .align 3
+ie0: .space 8
+ .global _start
+ .text
+_start:
+ addis 9,13,ie0@got@tprel@ha
+ ld 9,ie0@got@tprel@l(9)
+EOF
+ if $gcc_cv_as -a64 -o conftest.o conftest.s > /dev/null 2>&1 \
+ && $gcc_cv_ld -melf64ppc --no-toc-sort -o conftest conftest.o > /dev/null 2>&1; then
+ gcc_cv_ld_large_toc=yes
+ fi
+ rm -f conftest conftest.o conftest.s
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_large_toc" >&5
+$as_echo "$gcc_cv_ld_large_toc" >&6; }
+ if test x"$gcc_cv_ld_large_toc" = xyes; then
+
+$as_echo "#define HAVE_LD_LARGE_TOC 1" >>confdefs.h
+
+ fi
;;
esac
fi
fi
+# In binutils 2.21, GNU ld gained support for new emulations fully
+# supporting the Solaris 2 ABI. Detect their presence in the linker used.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker *_sol2 emulation support" >&5
+$as_echo_n "checking linker *_sol2 emulation support... " >&6; }
+if test "${gcc_cv_ld_sol2_emulation+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ gcc_cv_ld_sol2_emulation=no
+ if test $in_tree_ld = yes ; then
+ if test "$gcc_cv_gld_major_version" -eq 2 -a \
+ "$gcc_cv_gld_minor_version" -ge 21 -o \
+ "$gcc_cv_gld_major_version" -gt 2 \
+ && test $in_tree_ld_is_elf = yes; then
+ gcc_cv_ld_sol2_emulation=yes
+ fi
+ elif test x$gcc_cv_ld != x; then
+ if $gcc_cv_ld -V 2>/dev/null | sed -e '1,/Supported emulations/d;q' | \
+ grep _sol2 > /dev/null; then
+ gcc_cv_ld_sol2_emulation=yes
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_ld_sol2_emulation" >&5
+$as_echo "$gcc_cv_ld_sol2_emulation" >&6; }
+if test x"$gcc_cv_ld_sol2_emulation" = xyes; then
+
+$as_echo "#define HAVE_LD_SOL2_EMULATION 1" >>confdefs.h
+
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking linker --sysroot support" >&5
$as_echo_n "checking linker --sysroot support... " >&6; }
if test "${gcc_cv_ld_sysroot+set}" = set; then :
all_outputs='Makefile gccbug'
# List of language makefile fragments.
all_lang_makefrags=
-# List of language subdirectory makefiles. Deprecated.
-all_lang_makefiles=
# Additional files for gengtype
all_gtfiles="$target_gtfiles"
if test -f $srcdir/$gcc_subdir/$subdir-tree.def; then
lang_tree_files="$lang_tree_files $srcdir/$gcc_subdir/$subdir-tree.def"
fi
- if test -f ${srcdir}/$gcc_subdir/Makefile.in
- then all_lang_makefiles="$gcc_subdir/Makefile"
- fi
all_languages="$all_languages $language"
all_compilers="$all_compilers $compilers"
all_outputs="$all_outputs $outputs"
+
# Echo link setup.
if test x${build} = x${host} ; then
if test x${host} = x${target} ; then
echo > cstamp-h ;;
esac
# Make sure all the subdirs exist.
-for d in $subdirs doc build
+for d in $subdirs doc build c-family
do
test -d $d || mkdir $d
done