ac_help="$ac_help
--with-local-prefix=DIR specifies directory to put local include."
ac_help="$ac_help
+ --enable-libstdcxx-v3
+ enable libstdc++-v3 for building and installation"
+ac_help="$ac_help
--with-gxx-include-dir=DIR
specifies directory to put g++ header files."
ac_help="$ac_help
ac_help="$ac_help
--with-dwarf2 force the default debug format to be DWARF2."
ac_help="$ac_help
+ --disable-shared don't provide a shared libgcc."
+ac_help="$ac_help
--enable-nls use Native Language Support (default)"
ac_help="$ac_help
--disable-nls do not use Native Language Support"
--with-gc={simple,page} Choose the garbage collection mechanism to use
with the compiler."
ac_help="$ac_help
+ --with-system-zlib use installed libz"
+ac_help="$ac_help
--enable-new-gxx-abi
select the new abi for g++. You must select an ABI
at configuration time, so that the correct runtime
support is built. You cannot mix ABIs."
ac_help="$ac_help
- --enable-libstdcxx-v3
- enable libstdc++-v3 for building and installation"
-ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
+ac_help="$ac_help
+ --enable-version-specific-runtime-libs Specify that runtime libraries shou
+ld be installed in a compiler-specific directory "
+ac_help="$ac_help
+ --with-slibdir=DIR shared libraries in DIR [LIBDIR]"
# Initialize some variables set by options.
# The variables have the same names as the options, with
program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
-echo "configure:610: checking LIBRARY_PATH variable" >&5
+echo "configure:630: checking LIBRARY_PATH variable" >&5
case ${LIBRARY_PATH} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
library_path_setting="contains current directory"
# - two terminals occur directly after each other
# - the path contains an element with a dot in it
echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
-echo "configure:635: checking GCC_EXEC_PREFIX variable" >&5
+echo "configure:655: checking GCC_EXEC_PREFIX variable" >&5
case ${GCC_EXEC_PREFIX} in
[:\;]* | *[:\;] | *[:\;][:\;]* | *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
gcc_exec_prefix_setting="contains current directory"
local_prefix=/usr/local
fi
+# Build a new-libstdc++ system (ie libstdc++-v3)
+echo $ac_n "checking for libstdc++ to install""... $ac_c" 1>&6
+echo "configure:771: checking for libstdc++ to install" >&5
+# Check whether --enable-libstdcxx-v3 or --disable-libstdcxx-v3 was given.
+if test "${enable_libstdcxx_v3+set}" = set; then
+ enableval="$enable_libstdcxx_v3"
+ enable_libstdcxx_v3="$enableval"
+else
+ enable_libstdcxx_v3=yes
+fi
+
+
+if test x$enable_libstdcxx_v3 = xyes; then
+ echo "$ac_t""v3" 1>&6
+ HAVE_LIBSTDCXX_V3=1
+ ac_esn=1
+else
+ echo "$ac_t""v2" 1>&6
+ HAVE_LIBSTDCXX_V3=0
+ ac_esn=0
+fi
+
# Don't set gcc_gxx_include_dir to gxx_include_dir since that's only
# passed in by the toplevel make and thus we'd get different behavior
# depending on where we built the sources.
gcc_gxx_include_dir='${libsubdir}/include/g++'
else
topsrcdir=${srcdir}/.. . ${srcdir}/../config.if
- gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/include/g++"-${libstdcxx_interface}
+ gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/include/"${libstdcxx_incdir}
fi
fi
fi
-
# Enable Multibyte Characters for C/C++
# Check whether --enable-c-mbchar or --disable-c-mbchar was given.
if test "${enable_c_mbchar+set}" = set; then
enableval="$enable_c_mbchar"
if test x$enable_c_mbchar != xno; then
- extra_c_flags="${extra_c_flags} -DMULTIBYTE_CHARS=1"
+ cat >> confdefs.h <<\EOF
+#define MULTIBYTE_CHARS 1
+EOF
+
fi
fi
# Check whether --enable-threads or --disable-threads was given.
if test "${enable_threads+set}" = set; then
enableval="$enable_threads"
- if test x$enable_threads = xno; then
- enable_threads=''
-fi
+ :
else
enable_threads=''
fi
target_thread_file=''
;;
xdecosf1 | xirix | xmach | xos2 | xposix | xpthreads | xsingle | \
- xsolaris | xwin32 | xdce | xvxworks)
+ xsolaris | xwin32 | xdce | xvxworks | xaix)
target_thread_file=$enable_threads_flag
;;
*)
fi
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ :
+else
+ enable_shared=yes
+fi
+
+
+
# Determine the host, build, and target systems
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:976: checking host system type" >&5
+echo "configure:1028: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:997: checking target system type" >&5
+echo "configure:1049: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1015: checking build system type" >&5
+echo "configure:1067: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1042: checking for $ac_word" >&5
+echo "configure:1094: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1072: checking for $ac_word" >&5
+echo "configure:1124: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1123: checking for $ac_word" >&5
+echo "configure:1175: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1155: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1207: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1166 "configure"
+#line 1218 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1171: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1223: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1197: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1249: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1202: checking whether we are using GNU C" >&5
+echo "configure:1254: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1211: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1263: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1230: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1282: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$CC" != xcc; then
echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
-echo "configure:1263: checking whether $CC and cc understand -c and -o together" >&5
+echo "configure:1315: checking whether $CC and cc understand -c and -o together" >&5
else
echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
-echo "configure:1266: checking whether cc understands -c and -o together" >&5
+echo "configure:1318: checking whether cc understands -c and -o together" >&5
fi
set dummy $CC; ac_cc="`echo $2 |
sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
# We do the test twice because some compilers refuse to overwrite an
# existing .o file with -o, though they will create one.
ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
-if { (eval echo configure:1278: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1279: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+if { (eval echo configure:1330: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1331: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
eval ac_cv_prog_cc_${ac_cc}_c_o=yes
if test "x$CC" != xcc; then
# Test first that cc exists at all.
- if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1284: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1336: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
ac_try='cc -c conftest.c -o conftest.o 1>&5'
- if { (eval echo configure:1286: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
- test -f conftest.o && { (eval echo configure:1287: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+ if { (eval echo configure:1338: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1339: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
then
# cc works too.
:
fi
+# autoconf is lame and doesn't give us any substitution variable for this.
if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
NO_MINUS_C_MINUS_O=yes
+else
+ OUTPUT_OPTION='-o $@'
fi
+
echo $ac_n "checking for long double""... $ac_c" 1>&6
-echo "configure:1319: checking for long double" >&5
+echo "configure:1375: checking for long double" >&5
if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_c_long_double=yes
else
cat > conftest.$ac_ext <<EOF
-#line 1327 "configure"
+#line 1383 "configure"
#include "confdefs.h"
int main() {
switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
; return 0; }
EOF
-if { (eval echo configure:1337: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1393: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_long_double=yes
else
echo $ac_n "checking whether ${CC-cc} accepts -Wno-long-long""... $ac_c" 1>&6
-echo "configure:1360: checking whether ${CC-cc} accepts -Wno-long-long" >&5
-echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -Wno-long-long -c conftest.c 2>&1`"; then
+echo "configure:1416: checking whether ${CC-cc} accepts -Wno-long-long" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_no_long_long'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ save_CFLAGS="$CFLAGS"
+CFLAGS="-Wno-long-long"
+cat > conftest.$ac_ext <<EOF
+#line 1423 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:1430: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
ac_cv_prog_cc_no_long_long=yes
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
ac_cv_prog_cc_no_long_long=no
fi
rm -f conftest*
-echo "$ac_t"$ac_cv_prog_cc_no_long_long 1>&6
+CFLAGS="$save_CFLAGS"
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_no_long_long" 1>&6
+strict1_warn=
+if test $ac_cv_prog_cc_no_long_long = yes; then
+ strict1_warn="-pedantic -Wno-long-long"
+fi
+
# If the native compiler is GCC, we can enable warnings even in stage1.
# That's useful for people building cross-compilers, or just running a
# quick `make'.
-stage1_warn_cflags=" -W -Wall -Wtraditional -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes"
-stage2_warn_cflags="$stage1_warn_cflags -pedantic -Wno-long-long"
-if test "x$GCC" = "xyes"; then
- if test $ac_cv_prog_cc_no_long_long = yes; then
- stage1_warn_cflags="$stage1_warn_cflags -pedantic -Wno-long-long"
- fi
-else
- stage1_warn_cflags=""
+warn_cflags=
+if test "x$GCC" = "xyes"; then
+ warn_cflags='$(GCC_WARN_CFLAGS)'
fi
+# Stage specific cflags for build.
+stage1_cflags=
+case $build in
+vax-*-*)
+ if test x$GCC = xyes
+ then
+ stage1_cflags="-Wa,-J"
+ else
+ stage1_cflags="-J"
+ fi
+ ;;
+esac
+
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1386: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1474: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:1414: checking whether a default assembler was specified" >&5
+echo "configure:1502: checking whether a default assembler was specified" >&5
if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
if test x"$gas_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
fi
echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:1426: checking whether a default linker was specified" >&5
+echo "configure:1514: checking whether a default linker was specified" >&5
if test x"${DEFAULT_LINKER+set}" = x"set"; then
if test x"$gnu_ld_flag" = x"no"; then
echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
echo "$ac_t""no" 1>&6
fi
+echo $ac_n "checking for GNU C library""... $ac_c" 1>&6
+echo "configure:1526: checking for GNU C library" >&5
+if eval "test \"`echo '$''{'gcc_cv_glibc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1531 "configure"
+#include "confdefs.h"
+#include <features.h>
+int main() {
+
+#if ! (defined __GLIBC__ || defined __GNU_LIBRARY__)
+#error Not a GNU C library system
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:1541: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ gcc_cv_glibc=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gcc_cv_glibc=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gcc_cv_glibc" 1>&6
+if test $gcc_cv_glibc = yes; then
+ cat >> confdefs.h <<\EOF
+#define _GNU_SOURCE 1
+EOF
+
+fi
+
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1438: checking for inline" >&5
+echo "configure:1562: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 1445 "configure"
+#line 1569 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:1452: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1576: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1484: checking for $ac_word" >&5
+echo "configure:1608: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$AWK" && break
done
-# Extract the first word of "flex", so it can be a program name with args.
-set dummy flex; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1516: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$LEX"; then
- ac_cv_prog_LEX="$LEX" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_LEX="flex"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
-fi
-fi
-LEX="$ac_cv_prog_LEX"
-if test -n "$LEX"; then
- echo "$ac_t""$LEX" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$LEXLIB"
-then
- case "$LEX" in
- flex*) ac_lib=fl ;;
- *) ac_lib=l ;;
- esac
- echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:1550: checking for yywrap in -l$ac_lib" >&5
-ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-l$ac_lib $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 1558 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char yywrap();
-
-int main() {
-yywrap()
-; return 0; }
-EOF
-if { (eval echo configure:1569: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- LEXLIB="-l$ac_lib"
-else
- echo "$ac_t""no" 1>&6
-fi
-
-fi
-
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:1592: checking whether ln works" >&5
+echo "configure:1638: checking whether ln works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1624: checking whether ln -s works" >&5
+echo "configure:1670: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1656: checking for volatile" >&5
+echo "configure:1702: checking for volatile" >&5
if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1661 "configure"
+#line 1707 "configure"
#include "confdefs.h"
int main() {
volatile int foo;
; return 0; }
EOF
-if { (eval echo configure:1668: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1714: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_c_volatile=yes
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1691: checking for $ac_word" >&5
+echo "configure:1737: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-for ac_prog in 'bison -y' byacc
-do
-# Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1723: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$YACC"; then
- ac_cv_prog_YACC="$YACC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_YACC="$ac_prog"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-YACC="$ac_cv_prog_YACC"
-if test -n "$YACC"; then
- echo "$ac_t""$YACC" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-test -n "$YACC" && break
-done
-test -n "$YACC" || YACC="yacc"
-
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1764: checking for a BSD compatible install" >&5
+echo "configure:1775: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1815: checking how to run the C preprocessor" >&5
+echo "configure:1826: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1830 "configure"
+#line 1841 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1836: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1847: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1847 "configure"
+#line 1858 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1853: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1864: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1864 "configure"
+#line 1875 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1870: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1881: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1895: checking for ANSI C header files" >&5
+echo "configure:1906: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1900 "configure"
+#line 1911 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1908: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1919: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1925 "configure"
+#line 1936 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1943 "configure"
+#line 1954 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 1964 "configure"
+#line 1975 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:1975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1999: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:2010: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2004 "configure"
+#line 2015 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:2013: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2024: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:2034: checking whether string.h and strings.h may both be included" >&5
+echo "configure:2045: checking whether string.h and strings.h may both be included" >&5
if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2039 "configure"
+#line 2050 "configure"
#include "confdefs.h"
#include <string.h>
#include <strings.h>
; return 0; }
EOF
-if { (eval echo configure:2047: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2058: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_string=yes
else
fi
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:2068: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:2079: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2073 "configure"
+#line 2084 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:2089: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2100: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
for ac_hdr in limits.h stddef.h string.h strings.h stdlib.h time.h \
fcntl.h unistd.h stab.h sys/file.h sys/time.h \
sys/resource.h sys/param.h sys/times.h sys/stat.h \
- direct.h malloc.h
+ direct.h malloc.h langinfo.h iconv.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2116: checking for $ac_hdr" >&5
+echo "configure:2127: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2121 "configure"
+#line 2132 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2126: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2137: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Check for thread headers.
ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:2156: checking for thread.h" >&5
+echo "configure:2167: checking for thread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2161 "configure"
+#line 2172 "configure"
#include "confdefs.h"
#include <thread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2166: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2177: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:2190: checking for pthread.h" >&5
+echo "configure:2201: checking for pthread.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2195 "configure"
+#line 2206 "configure"
#include "confdefs.h"
#include <pthread.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2200: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2211: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Extract the first word of "gnatbind", so it can be a program name with args.
set dummy gnatbind; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2227: checking for $ac_word" >&5
+echo "configure:2238: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gnat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+# See if we have the mktemp command.
+# Extract the first word of "mktemp", so it can be a program name with args.
+set dummy mktemp; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2270: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_have_mktemp_command'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$have_mktemp_command"; then
+ ac_cv_prog_have_mktemp_command="$have_mktemp_command" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_have_mktemp_command="yes"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_have_mktemp_command" && ac_cv_prog_have_mktemp_command="no"
+fi
+fi
+have_mktemp_command="$ac_cv_prog_have_mktemp_command"
+if test -n "$have_mktemp_command"; then
+ echo "$ac_t""$have_mktemp_command" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
# Do we have a single-tree copy of texinfo?
if test -f $srcdir/../texinfo/Makefile.in; then
MAKEINFO='$(objdir)/../texinfo/makeinfo/makeinfo'
# Extract the first word of "makeinfo", so it can be a program name with args.
set dummy makeinfo; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2266: checking for $ac_word" >&5
+echo "configure:2309: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$MAKEINFO"; then
# Found it, now check the version.
echo $ac_n "checking for modern makeinfo""... $ac_c" 1>&6
-echo "configure:2295: checking for modern makeinfo" >&5
+echo "configure:2338: checking for modern makeinfo" >&5
if eval "test \"`echo '$''{'gcc_cv_prog_makeinfo_modern'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_prog_version=`$MAKEINFO --version 2>&1 |
sed -n 's/^.*GNU texinfo.* \([0-9][0-9.]*\).*$/\1/p'`
- echo "configure:2301: version of makeinfo is $ac_prog_version" >&5
+ echo "configure:2344: version of makeinfo is $ac_prog_version" >&5
case $ac_prog_version in
'') gcc_cv_prog_makeinfo_modern=no;;
- 3.1[2-9] | 3.[2-9][0-9] | 4.* | 1.6[89] | 1.7[0-9])
+ 4.*)
gcc_cv_prog_makeinfo_modern=yes;;
*) gcc_cv_prog_makeinfo_modern=no;;
esac
if test $gcc_cv_prog_makeinfo_modern = no; then
echo "configure: warning:
*** Makeinfo is missing or too old.
-*** Info documentation will not be built or installed." 1>&2
+*** Info documentation will not be built." 1>&2
BUILD_INFO=
- INSTALL_INFO=
else
BUILD_INFO=info
- INSTALL_INFO=install-info
+fi
+
+# Is pod2man recent enough to regenerate manpages?
+echo $ac_n "checking for recent Pod::Man""... $ac_c" 1>&6
+echo "configure:2372: checking for recent Pod::Man" >&5
+if perl -e 'use 1.10 Pod::Man' >/dev/null 2>&1; then
+ echo "$ac_t""yes" 1>&6
+ GENERATED_MANPAGES=generated-manpages
+else
+ echo "$ac_t""no" 1>&6
+ GENERATED_MANPAGES=
+fi
+
+# How about lex?
+if test -f $srcdir/../flex/skel.c; then
+ FLEX='$(objdir)/../flex/flex'
+else
+ # Extract the first word of "flex", so it can be a program name with args.
+set dummy flex; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2388: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$FLEX"; then
+ ac_cv_prog_FLEX="$FLEX" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_FLEX="flex"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_FLEX" && ac_cv_prog_FLEX="false"
+fi
+fi
+FLEX="$ac_cv_prog_FLEX"
+if test -n "$FLEX"; then
+ echo "$ac_t""$FLEX" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+# Bison?
+# The -L switch is so bison can find its skeleton file.
+if test -f $srcdir/../bison/bison.simple; then
+ BISON='$(objdir)/../bison/bison -L $(srcdir)/../bison/'
+else
+ # Extract the first word of "bison", so it can be a program name with args.
+set dummy bison; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2425: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$BISON"; then
+ ac_cv_prog_BISON="$BISON" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_BISON="bison"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_BISON" && ac_cv_prog_BISON="false"
+fi
+fi
+BISON="$ac_cv_prog_BISON"
+if test -n "$BISON"; then
+ echo "$ac_t""$BISON" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
fi
# See if the stage1 system preprocessor understands the ANSI C
echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:2334: checking for preprocessor stringizing operator" >&5
+echo "configure:2459: checking for preprocessor stringizing operator" >&5
if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2339 "configure"
+#line 2464 "configure"
#include "confdefs.h"
#define x(y) #y
# Use <inttypes.h> only if it exists,
# doesn't clash with <sys/types.h>, and declares intmax_t.
echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:2372: checking for inttypes.h" >&5
+echo "configure:2497: checking for inttypes.h" >&5
if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2377 "configure"
+#line 2502 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <inttypes.h>
intmax_t i = -1;
; return 0; }
EOF
-if { (eval echo configure:2385: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2510: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
gcc_cv_header_inttypes_h=yes
else
# be either signed or unsigned.
#
echo $ac_n "checking for unsigned enumerated bitfields""... $ac_c" 1>&6
-echo "configure:2410: checking for unsigned enumerated bitfields" >&5
+echo "configure:2535: checking for unsigned enumerated bitfields" >&5
if eval "test \"`echo '$''{'gcc_cv_enum_bf_unsigned'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_enum_bf_unsigned=yes
else
cat > conftest.$ac_ext <<EOF
-#line 2418 "configure"
+#line 2543 "configure"
#include "confdefs.h"
#include <stdlib.h>
enum t { BLAH = 128 } ;
}
EOF
-if { (eval echo configure:2431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2556: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_enum_bf_unsigned=yes
else
fi
-for ac_func in strtoul bsearch putenv popen bcopy bzero bcmp \
- index rindex strchr strrchr kill getrlimit setrlimit atoll atoq \
+for ac_func in strtoul bsearch putenv popen bcopy \
+ strchr strrchr kill getrlimit setrlimit atoll atoq \
sysconf isascii gettimeofday strsignal putc_unlocked fputc_unlocked \
- fputs_unlocked getrusage valloc
+ fputs_unlocked getrusage iconv nl_langinfo
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2459: checking for $ac_func" >&5
+echo "configure:2584: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2464 "configure"
+#line 2589 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2612: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:2513: checking for ssize_t" >&5
+echo "configure:2638: checking for ssize_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2518 "configure"
+#line 2643 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
-echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:2547: checking for vprintf" >&5
-if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
+# Try to determine the array type of the second argument of getgroups
+# for the target system (int or gid_t).
+echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
+echo "configure:2674: checking for uid_t in sys/types.h" >&5
+if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2552 "configure"
+#line 2679 "configure"
#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char vprintf(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char vprintf();
-
+#include <sys/types.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "uid_t" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_uid_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_uid_t=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_type_uid_t" 1>&6
+if test $ac_cv_type_uid_t = no; then
+ cat >> confdefs.h <<\EOF
+#define uid_t int
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define gid_t int
+EOF
+
+fi
+
+echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
+echo "configure:2708: checking type of array argument to getgroups" >&5
+if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_type_getgroups=cross
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2716 "configure"
+#include "confdefs.h"
+
+/* Thanks to Mike Rendell for this test. */
+#include <sys/types.h>
+#define NGID 256
+#undef MAX
+#define MAX(x, y) ((x) > (y) ? (x) : (y))
+main()
+{
+ gid_t gidset[NGID];
+ int i, n;
+ union { gid_t gval; long lval; } val;
+
+ val.lval = -1;
+ for (i = 0; i < NGID; i++)
+ gidset[i] = val.gval;
+ n = getgroups (sizeof (gidset) / MAX (sizeof (int), sizeof (gid_t)) - 1,
+ gidset);
+ /* Exit non-zero if getgroups seems to require an array of ints. This
+ happens when gid_t is short but getgroups modifies an array of ints. */
+ exit ((n > 0 && gidset[n] != val.gval) ? 1 : 0);
+}
+
+EOF
+if { (eval echo configure:2741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_type_getgroups=gid_t
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_type_getgroups=int
+fi
+rm -fr conftest*
+fi
+
+if test $ac_cv_type_getgroups = cross; then
+ cat > conftest.$ac_ext <<EOF
+#line 2755 "configure"
+#include "confdefs.h"
+#include <unistd.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "getgroups.*int.*gid_t" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_getgroups=gid_t
+else
+ rm -rf conftest*
+ ac_cv_type_getgroups=int
+fi
+rm -f conftest*
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_type_getgroups" 1>&6
+cat >> confdefs.h <<EOF
+#define GETGROUPS_T $ac_cv_type_getgroups
+EOF
+
+
+if test "${target}" = "${build}"; then
+ TARGET_GETGROUPS_T=$ac_cv_type_getgroups
+else
+ case "${target}" in
+ # This condition may need some tweaking. It should include all
+ # targets where the array type of the second argument of getgroups
+ # is int and the type of gid_t is not equivalent to int.
+ *-*-sunos* | *-*-ultrix*)
+ TARGET_GETGROUPS_T=int
+ ;;
+ *)
+ TARGET_GETGROUPS_T=gid_t
+ ;;
+ esac
+fi
+
+
+echo $ac_n "checking for vprintf""... $ac_c" 1>&6
+echo "configure:2796: checking for vprintf" >&5
+if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2801 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char vprintf(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char vprintf();
+
int main() {
/* The GNU C library defines this for functions which it implements
; return 0; }
EOF
-if { (eval echo configure:2575: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:2599: checking for _doprnt" >&5
+echo "configure:2848: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2604 "configure"
+#line 2853 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
; return 0; }
EOF
-if { (eval echo configure:2627: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:2663: checking whether the printf functions support %p" >&5
+echo "configure:2912: checking whether the printf functions support %p" >&5
if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_func_printf_ptr=no
else
cat > conftest.$ac_ext <<EOF
-#line 2671 "configure"
+#line 2920 "configure"
#include "confdefs.h"
#include <stdio.h>
return (p != q);
}
EOF
-if { (eval echo configure:2684: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
gcc_cv_func_printf_ptr=yes
else
case "${host}" in
*-*-uwin*)
- # Under some versions of uwin, vfork is notoriously buggy and the test
- # can hang configure; on other versions, vfork exists just as a stub.
- # FIXME: This should be removed once vfork in uwin's runtime is fixed.
- ac_cv_func_vfork_works=no
+ { echo "configure: error:
+*** UWIN may not be used as a host platform because
+*** linking with posix.dll is not allowed by the GNU GPL" 1>&2; exit 1; }
;;
esac
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2717: checking for pid_t" >&5
+echo "configure:2965: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2722 "configure"
+#line 2970 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2751: checking for vfork.h" >&5
+echo "configure:2999: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2756 "configure"
+#line 3004 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2761: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3009: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2786: checking for working vfork" >&5
+echo "configure:3034: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2792: checking for vfork" >&5
+echo "configure:3040: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2797 "configure"
+#line 3045 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:2820: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3068: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 2842 "configure"
+#line 3090 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:2937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
fi
-for ac_hdr in unistd.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2963: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2968 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2973: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-done
-
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3002: checking for $ac_func" >&5
+echo "configure:3210: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3007 "configure"
+#line 3215 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3030: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3238: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
-echo $ac_n "checking for working mmap from /dev/zero""... $ac_c" 1>&6
-echo "configure:3055: checking for working mmap from /dev/zero" >&5
-if eval "test \"`echo '$''{'ac_cv_func_mmap_anywhere'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_func_mmap_anywhere=no
-else
- cat > conftest.$ac_ext <<EOF
-#line 3063 "configure"
-#include "confdefs.h"
-
-/* Test by Richard Henderson and Alexandre Oliva.
- Check whether mmap from /dev/zero works. */
+# The test program for the next two tests is the same except for one
+# set of ifdefs.
+cat >ct-mmap.inc <<'EOF'
#include <sys/types.h>
-#include <fcntl.h>
#include <sys/mman.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <setjmp.h>
+#include <stdio.h>
+
+#if !defined (MAP_ANONYMOUS) && defined (MAP_ANON)
+# define MAP_ANONYMOUS MAP_ANON
+#endif
/* This mess was copied from the GNU getpagesize.h. */
#ifndef HAVE_GETPAGESIZE
#endif /* no HAVE_GETPAGESIZE */
-int main()
+#ifndef MAP_FAILED
+# define MAP_FAILED -1
+#endif
+
+#undef perror_exit
+#define perror_exit(str, val) \
+ do { perror(str); exit(val); } while (0)
+
+/* Some versions of cygwin mmap require that munmap is called with the
+ same parameters as mmap. GCC expects that this is not the case.
+ Test for various forms of this problem. Warning - icky signal games. */
+
+static sigset_t unblock_sigsegv;
+static jmp_buf r;
+static size_t pg;
+static int devzero;
+
+static char *
+anonmap (size)
+ size_t size;
{
- char *x;
- int fd, pg;
+#ifdef USE_MAP_ANON
+ return (char *) mmap (0, size, PROT_READ|PROT_WRITE,
+ MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
+#else
+ return (char *) mmap (0, size, PROT_READ|PROT_WRITE,
+ MAP_PRIVATE, devzero, 0);
+#endif
+}
- fd = open("/dev/zero", O_RDWR);
- if (fd < 0)
- exit(1);
+static void
+sigsegv (unused)
+ int unused;
+{
+ sigprocmask (SIG_UNBLOCK, &unblock_sigsegv, 0);
+ longjmp (r, 1);
+}
- pg = getpagesize();
- x = (char*)mmap(0, pg, PROT_READ|PROT_WRITE, MAP_PRIVATE, fd, 0);
- if (x == (char *) -1)
- exit(2);
+/* Basic functionality test. */
+void
+test_0 ()
+{
+ char *x = anonmap (pg);
+ if (x == (char *) MAP_FAILED)
+ perror_exit("test 0 mmap", 2);
*(int *)x += 1;
if (munmap(x, pg) < 0)
- exit(3);
+ perror_exit("test 0 munmap", 3);
+}
+
+/* 1. If we map a 2-page region and unmap its second page, the first page
+ must remain. */
+static void
+test_1 ()
+{
+ char *x = anonmap (pg * 2);
+ if (x == (char *)MAP_FAILED)
+ perror_exit ("test 1 mmap", 4);
+
+ signal (SIGSEGV, sigsegv);
+ if (setjmp (r))
+ perror_exit ("test 1 fault", 5);
+
+ x[0] = 1;
+ x[pg] = 1;
+
+ if (munmap (x + pg, pg) < 0)
+ perror_exit ("test 1 munmap 1", 6);
+ x[0] = 2;
+
+ if (setjmp (r) == 0)
+ {
+ x[pg] = 1;
+ perror_exit ("test 1 no fault", 7);
+ }
+ if (munmap (x, pg) < 0)
+ perror_exit ("test 1 munmap 2", 8);
+}
+
+/* 2. If we map a 2-page region and unmap its first page, the second
+ page must remain. */
+static void
+test_2 ()
+{
+ char *x = anonmap (pg * 2);
+ if (x == (char *)MAP_FAILED)
+ perror_exit ("test 2 mmap", 9);
+
+ signal (SIGSEGV, sigsegv);
+ if (setjmp (r))
+ perror_exit ("test 2 fault", 10);
+
+ x[0] = 1;
+ x[pg] = 1;
+
+ if (munmap (x, pg) < 0)
+ perror_exit ("test 2 munmap 1", 11);
+
+ x[pg] = 2;
+
+ if (setjmp (r) == 0)
+ {
+ x[0] = 1;
+ perror_exit ("test 2 no fault", 12);
+ }
+
+ if (munmap (x+pg, pg) < 0)
+ perror_exit ("test 2 munmap 2", 13);
+}
+
+/* 3. If we map two adjacent 1-page regions and unmap them both with
+ one munmap, both must go away.
+
+ Getting two adjacent 1-page regions with two mmap calls is slightly
+ tricky. All OS's tested skip over already-allocated blocks; therefore
+ we have been careful to unmap all allocated regions in previous tests.
+ HP/UX allocates pages backward in memory. No OS has yet been observed
+ to be so perverse as to leave unmapped space between consecutive calls
+ to mmap. */
+
+static void
+test_3 ()
+{
+ char *x, *y, *z;
+
+ x = anonmap (pg);
+ if (x == (char *)MAP_FAILED)
+ perror_exit ("test 3 mmap 1", 14);
+ y = anonmap (pg);
+ if (y == (char *)MAP_FAILED)
+ perror_exit ("test 3 mmap 2", 15);
+
+ if (y != x + pg)
+ {
+ if (y == x - pg)
+ z = y, y = x, x = z;
+ else
+ {
+ fprintf (stderr, "test 3 nonconsecutive pages - %lx, %lx\n",
+ (unsigned long)x, (unsigned long)y);
+ exit (16);
+ }
+ }
+
+ signal (SIGSEGV, sigsegv);
+ if (setjmp (r))
+ perror_exit ("test 3 fault", 17);
+
+ x[0] = 1;
+ y[0] = 1;
+
+ if (munmap (x, pg*2) < 0)
+ perror_exit ("test 3 munmap", 18);
+
+ if (setjmp (r) == 0)
+ {
+ x[0] = 1;
+ perror_exit ("test 3 no fault 1", 19);
+ }
+
+ signal (SIGSEGV, sigsegv);
+ if (setjmp (r) == 0)
+ {
+ y[0] = 1;
+ perror_exit ("test 3 no fault 2", 20);
+ }
+}
+
+int
+main ()
+{
+ sigemptyset (&unblock_sigsegv);
+ sigaddset (&unblock_sigsegv, SIGSEGV);
+ pg = getpagesize ();
+#ifndef USE_MAP_ANON
+ devzero = open ("/dev/zero", O_RDWR);
+ if (devzero < 0)
+ perror_exit ("open /dev/zero", 1);
+#endif
+
+ test_0();
+ test_1();
+ test_2();
+ test_3();
exit(0);
}
EOF
-if { (eval echo configure:3135: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+
+echo $ac_n "checking for working mmap from /dev/zero""... $ac_c" 1>&6
+echo "configure:3509: checking for working mmap from /dev/zero" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_dev_zero'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ # If this is not cygwin, and /dev/zero is a character device, it's probably
+ # safe to assume it works.
+ case "$host_os" in
+ cygwin* | win32 | pe | mingw* ) ac_cv_func_mmap_dev_zero=buggy ;;
+ * ) if test -c /dev/zero
+ then ac_cv_func_mmap_dev_zero=yes
+ else ac_cv_func_mmap_dev_zero=no
+ fi ;;
+ esac
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3525 "configure"
+#include "confdefs.h"
+#include "ct-mmap.inc"
+EOF
+if { (eval echo configure:3529: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ ac_cv_func_mmap_dev_zero=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ if test $? -lt 4
+ then ac_cv_func_mmap_dev_zero=no
+ else ac_cv_func_mmap_dev_zero=buggy
+ fi
+fi
+rm -fr conftest*
+fi
+
+
+fi
+
+echo "$ac_t""$ac_cv_func_mmap_dev_zero" 1>&6
+if test $ac_cv_func_mmap_dev_zero = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_MMAP_DEV_ZERO 1
+EOF
+
+fi
+
+echo $ac_n "checking for working mmap with MAP_ANON(YMOUS)""... $ac_c" 1>&6
+echo "configure:3556: checking for working mmap with MAP_ANON(YMOUS)" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_anon'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$cross_compiling" = yes; then
+ # Unlike /dev/zero, it is not safe to assume MAP_ANON(YMOUS) works
+ # just because it's there. Some SCO Un*xen define it but don't implement it.
+ ac_cv_func_mmap_anon=no
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3566 "configure"
+#include "confdefs.h"
+#define USE_MAP_ANON
+#include "ct-mmap.inc"
+EOF
+if { (eval echo configure:3571: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
- ac_cv_func_mmap_anywhere=yes
+ ac_cv_func_mmap_anon=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -fr conftest*
- ac_cv_func_mmap_anywhere=no
+ if test $? -lt 4
+ then ac_cv_func_mmap_anon=no
+ else ac_cv_func_mmap_anon=buggy
+ fi
fi
rm -fr conftest*
fi
+
fi
-echo "$ac_t""$ac_cv_func_mmap_anywhere" 1>&6
-if test $ac_cv_func_mmap_anywhere = yes; then
+echo "$ac_t""$ac_cv_func_mmap_anon" 1>&6
+if test $ac_cv_func_mmap_anon = yes; then
cat >> confdefs.h <<\EOF
-#define HAVE_MMAP_ANYWHERE 1
+#define HAVE_MMAP_ANON 1
EOF
fi
+rm -f ct-mmap.inc
echo $ac_n "checking for working mmap of a file""... $ac_c" 1>&6
-echo "configure:3158: checking for working mmap of a file" >&5
+echo "configure:3599: checking for working mmap of a file" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_file=no
else
cat > conftest.$ac_ext <<EOF
-#line 3173 "configure"
+#line 3614 "configure"
#include "confdefs.h"
/* Test by Zack Weinberg. Modified from MMAP_ANYWHERE test by
exit(0);
}
EOF
-if { (eval echo configure:3210: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3651: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_file=yes
else
# We will need to find libiberty.h and ansidecl.h
saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -I${srcdir} -I${srcdir}/../include"
-for ac_func in bcopy bzero bcmp \
- index rindex getenv atol sbrk abort atof getcwd getwd \
+for ac_func in bcopy \
+ getenv atol sbrk abort atof getcwd getwd \
strsignal putc_unlocked fputs_unlocked strstr environ \
malloc realloc calloc free basename getopt
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3243: checking whether $ac_func is declared" >&5
+echo "configure:3684: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3248 "configure"
+#line 3689 "configure"
#include "confdefs.h"
#include "gansidecl.h"
#include "system.h"
#endif
; return 0; }
EOF
-if { (eval echo configure:3259: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3700: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
cat >> confdefs.h <<EOF
#define HAVE_DECL_BCOPY 1
EOF
- cat >> confdefs.h <<EOF
-#define HAVE_DECL_BZERO 1
-EOF
- cat >> confdefs.h <<EOF
-#define HAVE_DECL_BCMP 1
-EOF
\
cat >> confdefs.h <<EOF
-#define HAVE_DECL_INDEX 1
-EOF
- cat >> confdefs.h <<EOF
-#define HAVE_DECL_RINDEX 1
-EOF
- cat >> confdefs.h <<EOF
#define HAVE_DECL_GETENV 1
EOF
cat >> confdefs.h <<EOF
do
ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3364: checking whether $ac_func is declared" >&5
+echo "configure:3793: checking whether $ac_func is declared" >&5
if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3369 "configure"
+#line 3798 "configure"
#include "confdefs.h"
#include "gansidecl.h"
#include "system.h"
#endif
; return 0; }
EOF
-if { (eval echo configure:3384: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3813: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "gcc_cv_have_decl_$ac_func=yes"
else
# mkdir takes a single argument on some systems.
echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:3427: checking if mkdir takes one argument" >&5
+echo "configure:3856: checking if mkdir takes one argument" >&5
if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3432 "configure"
-#include "confdefs.h"
-
-#include <sys/types.h>
-#ifdef HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif
-#ifdef HAVE_DIRECT_H
-# include <direct.h>
-#endif
-int main() {
-mkdir ("foo", 0);
-; return 0; }
-EOF
-if { (eval echo configure:3449: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- gcc_cv_mkdir_takes_one_arg=no
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- gcc_cv_mkdir_takes_one_arg=yes
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$gcc_cv_mkdir_takes_one_arg" 1>&6
-if test $gcc_cv_mkdir_takes_one_arg = yes ; then
- cat >> confdefs.h <<\EOF
-#define MKDIR_TAKES_ONE_ARG 1
-EOF
-
-fi
-
-
-# File extensions
-manext='.1'
-objext='.o'
-
-
-
-build_xm_file=
-build_xm_defines=
-build_install_headers_dir=install-headers-tar
-build_exeext=
-host_xm_file=
-host_xm_defines=
-host_xmake_file=
-host_truncate_target=
-host_exeext=
-
-# Decode the host machine, then the target machine.
-# For the host machine, we save the xm_file variable as host_xm_file;
-# then we decode the target machine and forget everything else
-# that came from the host machine.
-for machine in $build $host $target; do
-
- out_file=
- xmake_file=
- tmake_file=
- extra_headers=
- extra_passes=
- extra_parts=
- extra_programs=
- extra_objs=
- extra_host_objs=
- extra_gcc_objs=
- xm_defines=
- float_format=
- # Set this to force installation and use of collect2.
- use_collect2=
- # Set this to override the default target model.
- target_cpu_default=
- # Set this to control how the header file directory is installed.
- install_headers_dir=install-headers-tar
- # Set this to a non-empty list of args to pass to cpp if the target
- # wants its .md file passed through cpp.
- md_cppflags=
- # Set this if directory names should be truncated to 14 characters.
- truncate_target=
- # Set this if gdb needs a dir command with `dirname $out_file`
- gdb_needs_out_file_path=
- # Set this if the build machine requires executables to have a
- # file name suffix.
- exeext=
- # Set this to control which thread package will be used.
- thread_file=
- # Reinitialize these from the flag values every loop pass, since some
- # configure entries modify them.
- gas="$gas_flag"
- gnu_ld="$gnu_ld_flag"
- enable_threads=$enable_threads_flag
-
- # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
- # updated in each machine entry.
- tm_p_file=
- cpu_type=`echo $machine | sed 's/-.*$//'`
- case $machine in
- alpha*-*-*)
- cpu_type=alpha
- ;;
- strongarm*-*-*)
- cpu_type=arm
- ;;
- arm*-*-*)
- cpu_type=arm
- ;;
- c*-convex-*)
- cpu_type=convex
- ;;
- i[34567]86-*-*)
- cpu_type=i386
- ;;
- hppa*-*-*)
- cpu_type=pa
- ;;
- m68000-*-*)
- cpu_type=m68k
- ;;
- mips*-*-*)
- cpu_type=mips
- ;;
- pj*-*-*)
- cpu_type=pj
- ;;
- powerpc*-*-*)
- cpu_type=rs6000
- ;;
- pyramid-*-*)
- cpu_type=pyr
- ;;
- sparc*-*-*)
- cpu_type=sparc
- ;;
- esac
-
- tm_file=${cpu_type}/${cpu_type}.h
- xm_file=${cpu_type}/xm-${cpu_type}.h
- if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h;
- then
- tm_p_file=${cpu_type}/${cpu_type}-protos.h;
- fi
- # On a.out targets, we need to use collect2.
- case $machine in
- *-*-*aout*)
- use_collect2=yes
- ;;
- esac
-
- # Common parts for linux-gnu and openbsd systems
- case $machine in
- *-*-linux-gnu*)
- xm_defines="HAVE_ATEXIT POSIX BSTRING"
- ;;
- *-*-openbsd*)
- tm_file=${cpu_type}/openbsd.h
- tmake_file="t-libc-ok t-openbsd"
- # avoid surprises, always provide an xm-openbsd file
- xm_file=${cpu_type}/xm-openbsd.h
- # don't depend on processor x-fragments as well
- xmake_file=none
- if test x$enable_threads = xyes; then
- thread_file='posix'
- tmake_file="${tmake_file} t-openbsd-thread"
- fi
- ;;
- esac
-
- case $machine in
- # Support site-specific machine types.
- *local*)
- cpu_type=`echo $machine | sed -e 's/-.*//'`
- rest=`echo $machine | sed -e "s/$cpu_type-//"`
- xm_file=${cpu_type}/xm-$rest.h
- tm_file=${cpu_type}/$rest.h
- if test -f $srcdir/config/${cpu_type}/x-$rest; \
- then xmake_file=${cpu_type}/x-$rest; \
- else true; \
- fi
- if test -f $srcdir/config/${cpu_type}/t-$rest; \
- then tmake_file=${cpu_type}/t-$rest; \
- else true; \
- fi
- ;;
- 1750a-*-*)
- ;;
- a29k-*-bsd* | a29k-*-sym1*)
- tm_file="${tm_file} a29k/unix.h"
- xm_defines=USG
- xmake_file=a29k/x-unix
- use_collect2=yes
- ;;
- a29k-*-udi | a29k-*-coff)
- tm_file="${tm_file} dbxcoff.h a29k/udi.h"
- tmake_file=a29k/t-a29kbare
- ;;
- a29k-wrs-vxworks*)
- tm_file="${tm_file} dbxcoff.h a29k/udi.h a29k/vx29k.h"
- tmake_file=a29k/t-vx29k
- extra_parts="crtbegin.o crtend.o"
- thread_file='vxworks'
- ;;
- a29k-*-*) # Default a29k environment.
- use_collect2=yes
- ;;
- alpha-*-interix)
- tm_file="${tm_file} alpha/alpha32.h interix.h alpha/alpha-interix.h"
-
- # GAS + IEEE_CONFORMANT+IEEE (no inexact);
- #target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT|MASK_IEEE"
-
- # GAS + IEEE_CONFORMANT
- target_cpu_default="MASK_GAS|MASK_IEEE_CONFORMANT"
-
- xm_file="alpha/xm-alpha-interix.h xm-interix.h"
- xmake_file="x-interix alpha/t-pe"
- tmake_file="alpha/t-alpha alpha/t-interix alpha/t-ieee"
- if test x$enable_threads = xyes ; then
- thread_file='posix'
- fi
- if test x$stabs = xyes ; then
- tm_file="${tm_file} dbxcoff.h"
- fi
- #prefix='$$INTERIX_ROOT'/usr/contrib
- #local_prefix='$$INTERIX_ROOT'/usr/contrib
- ;;
- alpha*-*-linux-gnuecoff*)
- tm_file="${tm_file} alpha/linux-ecoff.h alpha/linux.h"
- target_cpu_default="MASK_GAS"
- tmake_file="alpha/t-alpha alpha/t-ieee"
- gas=no
- xmake_file=none
- gas=yes gnu_ld=yes
- ;;
- alpha*-*-linux-gnulibc1*)
- tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
- target_cpu_default="MASK_GAS"
- tmake_file="t-linux t-linux-gnulibc1 alpha/t-alpha alpha/t-crtbe alpha/t-ieee"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
- xmake_file=none
- gas=yes gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
- alpha*-*-linux-gnu*)
- tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
- target_cpu_default="MASK_GAS"
- tmake_file="t-linux alpha/t-crtbe alpha/t-alpha alpha/t-ieee"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
- xmake_file=none
- gas=yes gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
- alpha*-*-netbsd*)
- tm_file="${tm_file} alpha/elf.h alpha/netbsd.h alpha/netbsd-elf.h"
- target_cpu_default="MASK_GAS"
- tmake_file="alpha/t-crtbe alpha/t-alpha alpha/t-ieee"
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
- xmake_file=none
- gas=yes gnu_ld=yes
- ;;
-
- alpha*-*-openbsd*)
- # default x-alpha is only appropriate for dec-osf.
- target_cpu_default="MASK_GAS"
- tmake_file="alpha/t-alpha alpha/t-ieee"
- ;;
-
- alpha*-dec-osf*)
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas != xyes
- then
- extra_passes="mips-tfile mips-tdump"
- fi
- use_collect2=yes
- tmake_file="alpha/t-alpha alpha/t-ieee"
- case $machine in
- *-*-osf1*)
- tm_file="${tm_file} alpha/osf.h alpha/osf12.h alpha/osf2or3.h"
- ;;
- *-*-osf[23]*)
- tm_file="${tm_file} alpha/osf.h alpha/osf2or3.h"
- ;;
- *-*-osf4*)
- tm_file="${tm_file} alpha/osf.h"
- # Some versions of OSF4 (specifically X4.0-9 296.7) have
- # a broken tar, so we use cpio instead.
- install_headers_dir=install-headers-cpio
- ;;
- *-*-osf5*)
- tm_file="${tm_file} alpha/osf.h alpha/osf5.h"
- ;;
- esac
- case $machine in
- *-*-osf4.0[b-z] | *-*-osf4.[1-9]* | *-*-osf5*)
- target_cpu_default=MASK_SUPPORT_ARCH
- ;;
- esac
- ;;
- alpha*-*-vxworks*)
- tm_file="${tm_file} dbx.h alpha/vxworks.h"
- tmake_file="alpha/t-alpha alpha/t-ieee"
- if x$gas != xyes
- then
- extra_passes="mips-tfile mips-tdump"
- fi
- use_collect2=yes
- thread_file='vxworks'
- ;;
- alpha*-*-winnt*)
- tm_file="${tm_file} alpha/alpha32.h alpha/win-nt.h winnt/win-nt.h"
- xm_file="${xm_file} config/winnt/xm-winnt.h alpha/xm-winnt.h"
- tmake_file="t-libc-ok alpha/t-alpha alpha/t-ieee"
- xmake_file=winnt/x-winnt
- extra_host_objs=oldnames.o
- extra_gcc_objs="spawnv.o oldnames.o"
- if test x$gnu_ld != xyes
- then
- extra_programs=ld.exe
- fi
- if test x$enable_threads = xyes; then
- thread_file='win32'
- fi
- ;;
- alpha*-dec-vms*)
- tm_file=alpha/vms.h
- xm_file="${xm_file} alpha/xm-vms.h"
- tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
- ;;
- arc-*-elf*)
- extra_parts="crtinit.o crtfini.o"
- ;;
- arm-*-coff* | armel-*-coff*)
- tm_file=arm/coff.h
- tmake_file=arm/t-arm-coff
- ;;
- arm-*-vxworks*)
- tm_file=arm/vxarm.h
- tmake_file=arm/t-arm-coff
- thread_file='vxworks'
- ;;
- arm-*-riscix1.[01]*) # Acorn RISC machine (early versions)
- tm_file=arm/riscix1-1.h
- use_collect2=yes
- ;;
- arm-*-riscix*) # Acorn RISC machine
- if test x$gas = xyes
- then
- tm_file=arm/rix-gas.h
- else
- tm_file=arm/riscix.h
- fi
- xmake_file=arm/x-riscix
- tmake_file=arm/t-riscix
- use_collect2=yes
- ;;
- arm-semi-aout | armel-semi-aout)
- tm_file=arm/semi.h
- tmake_file=arm/t-semi
- ;;
- arm-semi-aof | armel-semi-aof)
- tm_file=arm/semiaof.h
- tmake_file=arm/t-semiaof
- ;;
- arm*-*-netbsd*)
- tm_file=arm/netbsd.h
- tmake_file="t-netbsd arm/t-netbsd"
- use_collect2=yes
- ;;
- arm*-*-linux-gnuaout*) # ARM GNU/Linux with a.out
- cpu_type=arm
- xmake_file=x-linux
- tm_file=arm/linux-aout.h
- tmake_file=arm/t-linux
- gnu_ld=yes
- ;;
- arm*-*-linux-gnuoldld*) # ARM GNU/Linux with old ELF linker
- xm_file=arm/xm-linux.h
- xmake_file=x-linux
- tm_file="arm/linux-oldld.h arm/linux-elf.h"
- case $machine in
- armv2*-*-*)
- tm_file="arm/linux-elf26.h $tm_file"
- ;;
- esac
- tmake_file="t-linux arm/t-linux"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- case x${enable_threads} in
- x | xyes | xpthreads | xposix)
- thread_file='posix'
- ;;
- esac
- ;;
- arm*-*-linux-gnu*) # ARM GNU/Linux with ELF
- xm_file=arm/xm-linux.h
- xmake_file=x-linux
- tm_file="arm/linux-elf.h"
- case $machine in
- armv2*-*-*)
- tm_file="arm/linux-elf26.h $tm_file"
- ;;
- esac
- tmake_file="t-linux arm/t-linux"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- case x${enable_threads} in
- x | xyes | xpthreads | xposix)
- thread_file='posix'
- ;;
- esac
- ;;
- arm*-*-uclinux*) # ARM ucLinux
- tm_file=arm/uclinux-elf.h
- tmake_file=arm/t-arm-elf
- ;;
- arm*-*-aout)
- tm_file=arm/aout.h
- tmake_file=arm/t-arm-aout
- ;;
- arm*-*-ecos-elf)
- tm_file=arm/ecos-elf.h
- tmake_file=arm/t-arm-elf
- ;;
- arm*-*-elf)
- tm_file=arm/unknown-elf.h
- tmake_file=arm/t-arm-elf
- ;;
- arm*-*-conix*)
- tm_file=arm/conix-elf.h
- tmake_file=arm/t-arm-elf
- ;;
- arm*-*-oabi)
- tm_file=arm/unknown-elf-oabi.h
- tmake_file=arm/t-arm-elf
- ;;
- arm-*-pe*)
- tm_file=arm/pe.h
- tmake_file=arm/t-pe
- extra_objs="pe.o"
- ;;
- avr-*-*)
- ;;
- c1-convex-*) # Convex C1
- target_cpu_default=1
- use_collect2=yes
- ;;
- c2-convex-*) # Convex C2
- target_cpu_default=2
- use_collect2=yes
- ;;
- c32-convex-*)
- target_cpu_default=4
- use_collect2=yes
- ;;
- c34-convex-*)
- target_cpu_default=8
- use_collect2=yes
- ;;
- c38-convex-*)
- target_cpu_default=16
- use_collect2=yes
- ;;
- c4x-*)
- cpu_type=c4x
- tmake_file=c4x/t-c4x
- ;;
- clipper-intergraph-clix*)
- tm_file="${tm_file} svr3.h clipper/clix.h"
- xm_file=clipper/xm-clix.h
- xmake_file=clipper/x-clix
- extra_headers=va-clipper.h
- extra_parts="crtbegin.o crtend.o"
- install_headers_dir=install-headers-cpio
- ;;
- d30v-*)
- float_format=i64
- ;;
- dsp16xx-*)
- ;;
- elxsi-elxsi-*)
- use_collect2=yes
- ;;
- fr30-*-elf)
- tm_file="fr30/fr30.h"
- tmake_file=fr30/t-fr30
- extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- ;;
-# This hasn't been upgraded to GCC 2.
-# fx80-alliant-*) # Alliant FX/80
-# ;;
- h8300-*-*)
- float_format=i32
- ;;
- hppa*-*-linux*)
- target_cpu_default="(MASK_PA_11 | MASK_GAS | MASK_JUMP_IN_DELAY)"
- tm_file="${tm_file} pa/elf.h linux.h pa/pa-linux.h"
- tmake_file="t-linux pa/t-linux"
- extra_parts="crtbegin.o crtend.o"
- xmake_file=none
- gas=yes gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
- hppa*-*-openbsd*)
- target_cpu_default="MASK_PA_11"
- tmake_file=pa/t-openbsd
- ;;
- hppa1.1-*-pro*)
- target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
- tm_file="${tm_file} pa/pa32-regs.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h"
- xm_file=pa/xm-papro.h
- tmake_file=pa/t-pro
- ;;
- hppa1.1-*-osf*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-osf.h"
- use_collect2=yes
- ;;
- hppa1.1-*-rtems*)
- target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
- tm_file="${tm_file} pa/pa32-regs.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h pa/rtems.h"
- xm_file=pa/xm-papro.h
- tmake_file=pa/t-pro
- ;;
- hppa1.0-*-osf*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-osf.h"
- use_collect2=yes
- ;;
- hppa1.1-*-bsd*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h"
- target_cpu_default="MASK_PA_11"
- use_collect2=yes
- ;;
- hppa1.0-*-bsd*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h"
- use_collect2=yes
- ;;
- hppa1.0-*-hpux7*)
- tm_file="pa/pa-oldas.h ${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux7.h"
- xm_file=pa/xm-pahpux.h
- xmake_file=pa/x-pa-hpux
- if test x$gas = xyes
- then
- tm_file="${tm_file} pa/gas.h"
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa1.0-*-hpux8.0[0-2]*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
- xm_file=pa/xm-pahpux.h
- xmake_file=pa/x-pa-hpux
- if test x$gas = xyes
- then
- tm_file="${tm_file} pa/pa-gas.h"
- else
- tm_file="pa/pa-oldas.h ${tm_file}"
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa1.1-*-hpux8.0[0-2]*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
- xm_file=pa/xm-pahpux.h
- xmake_file=pa/x-pa-hpux
- if test x$gas = xyes
- then
- tm_file="${tm_file} pa/pa-gas.h"
- else
- tm_file="pa/pa-oldas.h ${tm_file}"
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa1.1-*-hpux8*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
- xm_file=pa/xm-pahpux.h
- xmake_file=pa/x-pa-hpux
- if test x$gas = xyes
- then
- tm_file="${tm_file} pa/pa-gas.h"
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa1.0-*-hpux8*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
- xm_file=pa/xm-pahpux.h
- xmake_file=pa/x-pa-hpux
- if test x$gas = xyes
- then
- tm_file="${tm_file} pa/pa-gas.h"
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa1.1-*-hpux10* | hppa2*-*-hpux10*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
- float_format=i128
- xm_file=pa/xm-pahpux.h
- xmake_file=pa/x-pa-hpux
- tmake_file=pa/t-pa
- if test x$gas = xyes
- then
- tm_file="${tm_file} pa/pa-gas.h"
- fi
- if test x$enable_threads = x; then
- enable_threads=$have_pthread_h
- fi
- if test x$enable_threads = xyes; then
- thread_file='dce'
- tmake_file="${tmake_file} pa/t-dce-thr"
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa1.0-*-hpux10*)
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
- float_format=i128
- xm_file=pa/xm-pahpux.h
- xmake_file=pa/x-pa-hpux
- tmake_file=pa/t-pa
- if test x$gas = xyes
- then
- tm_file="${tm_file} pa/pa-gas.h"
- fi
- if test x$enable_threads = x; then
- enable_threads=$have_pthread_h
- fi
- if test x$enable_threads = xyes; then
- thread_file='dce'
- tmake_file="${tmake_file} pa/t-dce-thr"
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa*64*-*-hpux11*)
- target_cpu_default="MASK_PA_11"
- xm_file=pa/xm-pa64hpux.h
- xmake_file=pa/x-pa-hpux
- tmake_file=pa/t-pa
- tm_file="pa/pa64-start.h ${tm_file} pa/pa64-regs.h pa/long_double.h pa/elf.h pa/pa-hpux.h pa/pa-hpux11.h pa/pa-64.h"
- float_format=i128
- tmake_file=pa/t-pa64
- target_cpu_default="(MASK_PA_11|MASK_PA_20)"
-
- if [ x$gas = xyes ]
- then
- tm_file="${tm_file} pa/pa-gas.h"
- fi
-# if [[ x$enable_threads = x ]]; then
-# enable_threads=$have_pthread_h
-# fi
-# if [[ x$enable_threads = xyes ]]; then
-# thread_file='dce'
-# tmake_file="${tmake_file} pa/t-dce-thr"
-# fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa1.1-*-hpux11* | hppa2*-*-hpux11*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
- float_format=i128
- xm_file=pa/xm-pahpux.h
- xmake_file=pa/x-pa-hpux
- tmake_file=pa/t-pa
- if test x$gas = xyes
- then
- tm_file="${tm_file} pa/pa-gas.h"
- fi
-# if test x$enable_threads = x; then
-# enable_threads=$have_pthread_h
-# fi
-# if test x$enable_threads = xyes; then
-# thread_file='dce'
-# tmake_file="${tmake_file} pa/t-dce-thr"
-# fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa1.0-*-hpux11*)
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
- float_format=i128
- xm_file=pa/xm-pahpux.h
- xmake_file=pa/x-pa-hpux
- if test x$gas = xyes
- then
- tm_file="${tm_file} pa/pa-gas.h"
- fi
-# if test x$enable_threads = x; then
-# enable_threads=$have_pthread_h
-# fi
-# if test x$enable_threads = xyes; then
-# thread_file='dce'
-# tmake_file="${tmake_file} pa/t-dce-thr"
-# fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa1.1-*-hpux* | hppa2*-*-hpux*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hpux9.h"
- xm_file=pa/xm-pahpux.h
- xmake_file=pa/x-pa-hpux
- if test x$gas = xyes
- then
- tm_file="${tm_file} pa/pa-gas.h"
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa1.0-*-hpux*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hpux9.h"
- xm_file=pa/xm-pahpux.h
- xmake_file=pa/x-pa-hpux
- if test x$gas = xyes
- then
- tm_file="${tm_file} pa/pa-gas.h"
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa1.1-*-hiux* | hppa2*-*-hiux*)
- target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hiux.h"
- xm_file=pa/xm-pahpux.h
- xmake_file=pa/x-pa-hpux
- if test x$gas = xyes
- then
- tm_file="${tm_file} pa/pa-gas.h"
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa1.0-*-hiux*)
- tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hiux.h"
- xm_file=pa/xm-pahpux.h
- xmake_file=pa/x-pa-hpux
- if test x$gas = xyes
- then
- tm_file="${tm_file} pa/pa-gas.h"
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- ;;
- hppa*-*-lites*)
- tm_file="${tm_file} pa/pa32-regs.h elfos.h pa/elf.h"
- target_cpu_default="MASK_PA_11"
- use_collect2=yes
- ;;
- hppa*-*-mpeix*)
- tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-mpeix.h"
- xm_file=pa/xm-pampeix.h
- xmake_file=pa/x-pa-mpeix
- echo "You must use gas. Assuming it is already installed."
- install_headers_dir=install-headers-tar
- use_collect2=yes
- ;;
- i370-*-opened*) # IBM 360/370/390 Architecture
- xm_file=i370/xm-oe.h
- tm_file=i370/oe.h
- xmake_file=i370/x-oe
- tmake_file=i370/t-oe
- ;;
- i370-*-mvs*)
- xm_file=i370/xm-mvs.h
- tm_file=i370/mvs.h
- tmake_file=i370/t-mvs
- ;;
- i370-*-linux*)
- xm_file="xm-linux.h i370/xm-linux.h"
- xmake_file=x-linux
- tm_file="i370/linux.h ${tm_file}"
- tmake_file="t-linux i370/t-linux"
- # broken_install=yes
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- # extra_parts="crtbegin.o crtend.o"
- gnu_ld=yes
- gas=yes
- elf=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
- i[34567]86-*-elf*)
- xm_file="${xm_file} xm-svr4.h i386/xm-sysv4.h"
- tm_file=i386/i386elf.h
- tmake_file=i386/t-i386elf
- xmake_file=x-svr4
- ;;
- i[34567]86-ibm-aix*) # IBM PS/2 running AIX
- if test x$gas = xyes
- then
- tm_file=i386/aix386.h
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtstuff
- else
- tm_file=i386/aix386ng.h
- use_collect2=yes
- fi
- xm_file="xm-alloca.h i386/xm-aix.h ${xm_file}"
- xm_defines=USG
- xmake_file=i386/x-aix
- ;;
- i[34567]86-ncr-sysv4*) # NCR 3000 - ix86 running system V.4
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG POSIX SMALL_ARG_MAX"
- xmake_file=i386/x-ncr3000
- if test x$stabs = xyes -a x$gas = xyes
- then
- tm_file=i386/sysv4gdb.h
- else
- tm_file=i386/sysv4.h
- fi
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtpic
- ;;
- i[34567]86-next-*)
- tm_file=i386/next.h
- xm_file=i386/xm-next.h
- tmake_file=i386/t-next
- xmake_file=i386/x-next
- extra_objs=nextstep.o
- extra_parts="crtbegin.o crtend.o"
- if test x$enable_threads = xyes; then
- thread_file='mach'
- fi
- ;;
- i[34567]86-sequent-bsd*) # 80386 from Sequent
- use_collect2=yes
- if test x$gas = xyes
- then
- tm_file=i386/seq-gas.h
- else
- tm_file=i386/sequent.h
- fi
- ;;
- i[34567]86-sequent-ptx1*)
- xm_defines="USG SVR3"
- xmake_file=i386/x-sysv3
- tm_file=i386/seq-sysv3.h
- tmake_file=i386/t-crtstuff
- extra_parts="crtbegin.o crtend.o"
- install_headers_dir=install-headers-cpio
- ;;
- i[34567]86-sequent-ptx2* | i[34567]86-sequent-sysv3*)
- xm_defines="USG SVR3"
- xmake_file=i386/x-sysv3
- tm_file=i386/seq2-sysv3.h
- tmake_file=i386/t-crtstuff
- extra_parts="crtbegin.o crtend.o"
- install_headers_dir=install-headers-cpio
- ;;
- i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG POSIX SMALL_ARG_MAX"
- xmake_file=x-svr4
- tm_file=i386/ptx4-i.h
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- install_headers_dir=install-headers-cpio
- ;;
- i386-sun-sunos*) # Sun i386 roadrunner
- xm_defines=USG
- tm_file=i386/sun.h
- use_collect2=yes
- ;;
- i[34567]86-wrs-vxworks*)
- tm_file=i386/vxi386.h
- tmake_file=i386/t-i386bare
- thread_file='vxworks'
- ;;
- i[34567]86-*-aout*)
- tm_file=i386/i386-aout.h
- tmake_file=i386/t-i386bare
- ;;
- i[34567]86-*-beospe*)
- xm_file=i386/xm-beos.h
- xm_defines="USE_C_ALLOCA"
- tmake_file=i386/t-beos
- tm_file=i386/beos-pe.h
- xmake_file=i386/x-beos
- extra_objs=winnt.o
- ;;
- i[34567]86-*-beoself* | i[34567]86-*-beos*)
- xm_file=i386/xm-beos.h
- tmake_file='i386/t-beos i386/t-crtpic'
- tm_file=i386/beos-elf.h
- xmake_file=i386/x-beos
- extra_objs=winnt.o
- extra_parts='crtbegin.o crtend.o'
- ;;
- i[34567]86-*-bsdi* | i[34567]86-*-bsd386*)
- tm_file=i386/bsd386.h
-# tmake_file=t-libc-ok
- ;;
- i[34567]86-*-bsd*)
- tm_file=i386/386bsd.h
-# tmake_file=t-libc-ok
-# Next line turned off because both 386BSD and BSD/386 use GNU ld.
-# use_collect2=yes
- ;;
- i[34567]86-*-freebsd[12] | i[34567]86-*-freebsd[12].* | i[34567]86-*-freebsd*aout*)
- tm_file="i386/freebsd.h i386/perform.h"
- tmake_file=t-freebsd
- ;;
- i[34567]86-*-freebsd*)
- tm_file="i386/i386.h i386/att.h svr4.h freebsd.h i386/freebsd-elf.h i386/perform.h"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- tmake_file=t-freebsd
- gas=yes
- gnu_ld=yes
- stabs=yes
- case x${enable_threads} in
- xyes | xpthreads | xposix)
- thread_file='posix'
- tmake_file="${tmake_file} t-freebsd-thread"
- ;;
- esac
- ;;
- i[34567]86-*-netbsd*)
- tm_file=i386/netbsd.h
- tmake_file=t-netbsd
- use_collect2=yes
- ;;
- i[34567]86-*-openbsd*)
- # we need collect2 until our bug is fixed...
- use_collect2=yes
- ;;
- i[34567]86-*-coff*)
- tm_file=i386/i386-coff.h
- tmake_file=i386/t-i386bare
- ;;
- i[34567]86-*-isc*) # 80386 running ISC system
- xm_file="${xm_file} i386/xm-isc.h"
- xm_defines="USG SVR3"
- case $machine in
- i[34567]86-*-isc[34]*)
- xmake_file=i386/x-isc3
- ;;
- *)
- xmake_file=i386/x-isc
- ;;
- esac
- if test x$gas = xyes -a x$stabs = xyes
- then
- tm_file=i386/iscdbx.h
- tmake_file=i386/t-svr3dbx
- extra_parts="svr3.ifile svr3z.ifile"
- else
- tm_file=i386/isccoff.h
- tmake_file=i386/t-crtstuff
- extra_parts="crtbegin.o crtend.o"
- fi
- tmake_file="$tmake_file i386/t-i386bare"
- install_headers_dir=install-headers-cpio
- ;;
- i[34567]86-*-linux-gnuoldld*) # Intel 80386's running GNU/Linux
- # pre BFD linkers
- xmake_file=x-linux-aout
- tmake_file="t-linux-aout i386/t-crtstuff"
- tm_file=i386/linux-oldld.h
- gnu_ld=yes
- float_format=i386
- ;;
- i[34567]86-*-linux-gnuaout*) # Intel 80386's running GNU/Linux
- xmake_file=x-linux-aout
- tmake_file="t-linux-aout i386/t-crtstuff"
- tm_file=i386/linux-aout.h
- gnu_ld=yes
- float_format=i386
- ;;
- i[34567]86-*-linux-gnulibc1) # Intel 80386's running GNU/Linux
- # GNU/Linux C library 5
- xmake_file=x-linux
- tm_file=i386/linux.h
- tmake_file="t-linux t-linux-gnulibc1 i386/t-crtstuff"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- float_format=i386
- if test x$enable_threads = xyes; then
- thread_file='single'
- fi
- ;;
- i[34567]86-*-linux-gnu*) # Intel 80386's running GNU/Linux
- # aka GNU/Linux C library 6
- xmake_file=x-linux
- tm_file=i386/linux.h
- tmake_file="t-linux i386/t-crtstuff"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- float_format=i386
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
- i[34567]86-*-gnu*)
- float_format=i386
- ;;
- i[34567]86-go32-msdos | i[34567]86-*-go32*)
- echo "GO32/DJGPP V1.X is no longer supported. Use *-pc-msdosdjgpp for DJGPP V2.X instead."
- exit 1
- ;;
- i[34567]86-pc-msdosdjgpp*)
- xm_file=i386/xm-djgpp.h
- tm_file=i386/djgpp.h
- tmake_file=i386/t-djgpp
- xmake_file=i386/x-djgpp
- gnu_ld=yes
- gas=yes
- exeext=.exe
- float_format=none
- case $host in *pc-msdosdjgpp*)
- target_alias=djgpp
- ;;
- esac
- ;;
- i[34567]86-moss-msdos* | i[34567]86-*-moss*)
- tm_file=i386/moss.h
- tmake_file=t-libc-ok
- gnu_ld=yes
- gas=yes
- ;;
- i[34567]86-*-lynxos*)
- if test x$gas = xyes
- then
- tm_file=i386/lynx.h
- else
- tm_file=i386/lynx-ng.h
- fi
- xm_file=i386/xm-lynx.h
- tmake_file=i386/t-i386bare
- xmake_file=x-lynx
- ;;
- i[34567]86-*-mach*)
- tm_file=i386/mach.h
-# tmake_file=t-libc-ok
- use_collect2=yes
- ;;
- i[34567]86-*-osfrose*) # 386 using OSF/rose
- if test x$elf = xyes
- then
- tm_file=i386/osfelf.h
- use_collect2=
- else
- tm_file=i386/osfrose.h
- use_collect2=yes
- fi
- xm_file="i386/xm-osf.h ${xm_file}"
- xmake_file=i386/x-osfrose
- tmake_file=i386/t-osf
- extra_objs=halfpic.o
- ;;
- i[34567]86-go32-rtems*)
- cpu_type=i386
- xm_file=i386/xm-go32.h
- tm_file=i386/go32-rtems.h
- tmake_file="i386/t-go32 t-rtems"
- ;;
- i[34567]86-*-rtemscoff*)
- cpu_type=i386
- tm_file=i386/rtems.h
- tmake_file="i386/t-i386bare t-rtems"
- ;;
- i[34567]86-*-rtems*|i[34567]86-*-rtemself*)
- cpu_type=i386
- tm_file=i386/rtemself.h
- extra_parts="crtbegin.o crtend.o crti.o crtn.o"
- tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
- ;;
- i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
- xm_file="xm-alloca.h ${xm_file} i386/xm-sco5.h"
- xm_defines="USG SVR3"
- xmake_file=i386/x-sco5
- install_headers_dir=install-headers-cpio
- tm_file=i386/sco5.h
- if test x$gas = xyes
- then
- tm_file="i386/sco5gas.h ${tm_file}"
- tmake_file=i386/t-sco5gas
- else
- tmake_file=i386/t-sco5
- fi
- tmake_file="$tmake_file i386/t-i386bare"
- extra_parts="crti.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
- ;;
- i[34567]86-*-sco3.2v4*) # 80386 running SCO 3.2v4 system
- xm_file="${xm_file} i386/xm-sco.h"
- xm_defines="USG SVR3 BROKEN_LDEXP SMALL_ARG_MAX"
- xmake_file=i386/x-sco4
- install_headers_dir=install-headers-cpio
- if test x$stabs = xyes
- then
- tm_file=i386/sco4dbx.h
- tmake_file=i386/t-svr3dbx
- extra_parts="svr3.ifile svr3z.rfile"
- else
- tm_file=i386/sco4.h
- tmake_file=i386/t-crtstuff
- extra_parts="crtbegin.o crtend.o"
- fi
- tmake_file="$tmake_file i386/t-i386bare"
- # The default EAFS filesystem supports long file names.
- # Truncating the target makes $host != $target which
- # makes gcc think it is doing a cross-compile.
- # truncate_target=yes
- ;;
- i[34567]86-*-sco*) # 80386 running SCO system
- xm_file=i386/xm-sco.h
- xmake_file=i386/x-sco
- install_headers_dir=install-headers-cpio
- if test x$stabs = xyes
- then
- tm_file=i386/scodbx.h
- tmake_file=i386/t-svr3dbx
- extra_parts="svr3.ifile svr3z.rfile"
- else
- tm_file=i386/sco.h
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtstuff
- fi
- tmake_file="$tmake_file i386/t-i386bare"
- truncate_target=yes
- ;;
- i[34567]86-*-solaris2*)
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG POSIX SMALL_ARG_MAX"
- tm_file=i386/sol2.h
- if test x$gas = xyes; then
- # Only needed if gas does not support -s
- tm_file="i386/sol2gas.h ${tm_file}"
- fi
- tmake_file="i386/t-i386bare i386/t-sol2"
- extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
- xmake_file=x-svr4
- if test x${enable_threads} = x; then
- enable_threads=$have_pthread_h
- if test x${enable_threads} = x; then
- enable_threads=$have_thread_h
- fi
- fi
- if test x${enable_threads} = xyes; then
- if test x${have_pthread_h} = xyes; then
- thread_file='posix'
- else
- thread_file='solaris'
- fi
- fi
- ;;
- i[34567]86-*-sysv5*) # Intel x86 on System V Release 5
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG POSIX"
- tm_file=i386/sysv5.h
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file="i386/t-i386bare i386/t-crtpic"
- xmake_file=x-svr4
- extra_parts="crtbegin.o crtend.o"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
- i[34567]86-*-sysv4*) # Intel 80386's running system V.4
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG POSIX SMALL_ARG_MAX"
- tm_file=i386/sysv4.h
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file="i386/t-i386bare i386/t-crtpic"
- xmake_file=x-svr4
- extra_parts="crtbegin.o crtend.o"
- ;;
- i[34567]86-*-udk*) # Intel x86 on SCO UW/OSR5 Dev Kit
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG POSIX"
- tm_file=i386/udk.h
- tmake_file="i386/t-i386bare i386/t-crtpic i386/t-udk"
- xmake_file=x-svr4
- extra_parts="crtbegin.o crtend.o"
- install_headers_dir=install-headers-cpio
- ;;
- i[34567]86-*-osf1*) # Intel 80386's running OSF/1 1.3+
- cpu_type=i386
- xm_file="${xm_file} xm-svr4.h i386/xm-sysv4.h i386/xm-osf1elf.h"
- xm_defines="USE_C_ALLOCA SMALL_ARG_MAX"
- if test x$stabs = xyes
- then
- tm_file=i386/osf1elfgdb.h
- else
- tm_file=i386/osf1elf.h
- fi
- tmake_file=i386/t-osf1elf
- xmake_file=i386/x-osf1elf
- extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- ;;
- i[34567]86-*-sysv*) # Intel 80386's running system V
- xm_defines="USG SVR3"
- xmake_file=i386/x-sysv3
- if test x$gas = xyes
- then
- if test x$stabs = xyes
- then
- tm_file=i386/svr3dbx.h
- tmake_file=i386/t-svr3dbx
- extra_parts="svr3.ifile svr3z.rfile"
- else
- tm_file=i386/svr3gas.h
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtstuff
- fi
- else
- tm_file=i386/sysv3.h
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtstuff
- fi
- tmake_file="$tmake_file i386/t-crtpic"
- ;;
- i386-*-vsta) # Intel 80386's running VSTa kernel
- xm_file="${xm_file} i386/xm-vsta.h"
- tm_file=i386/vsta.h
- tmake_file=i386/t-vsta
- xmake_file=i386/x-vsta
- ;;
- i[34567]86-*-win32)
- xm_file="${xm_file} i386/xm-cygwin.h"
- tmake_file=i386/t-cygwin
- tm_file=i386/win32.h
- xmake_file=i386/x-cygwin
- extra_objs=winnt.o
- if test x$enable_threads = xyes; then
- thread_file='win32'
- fi
- exeext=.exe
- ;;
- i[34567]86-*-pe | i[34567]86-*-cygwin*)
- xm_file="${xm_file} i386/xm-cygwin.h"
- tmake_file=i386/t-cygwin
- tm_file=i386/cygwin.h
- xmake_file=i386/x-cygwin
- extra_objs=winnt.o
- if test x$enable_threads = xyes; then
- thread_file='win32'
- fi
- exeext=.exe
- ;;
- i[34567]86-*-mingw32*)
- tm_file=i386/mingw32.h
- xm_file="${xm_file} i386/xm-mingw32.h"
- tmake_file="i386/t-cygwin i386/t-mingw32"
- extra_objs=winnt.o
- xmake_file=i386/x-cygwin
- if test x$enable_threads = xyes; then
- thread_file='win32'
- fi
- exeext=.exe
- case $machine in
- *mingw32msv*)
- ;;
- *minwg32crt* | *mingw32*)
- tm_file="${tm_file} i386/crtdll.h"
- ;;
- esac
- ;;
- i[34567]86-*-uwin*)
- tm_file=i386/uwin.h
- xm_file="${xm_file} i386/xm-uwin.h"
- xm_defines="USG NO_STAB_H"
- tmake_file="i386/t-cygwin i386/t-uwin"
- extra_objs=winnt.o
- xmake_file=i386/x-cygwin
- if test x$enable_threads = xyes; then
- thread_file='win32'
- fi
- exeext=.exe
- ;;
- i[34567]86-*-interix*)
- tm_file="i386/i386-interix.h interix.h"
- xm_file="i386/xm-i386-interix.h xm-interix.h"
- xm_defines="USG"
- tmake_file="i386/t-interix"
- extra_objs=interix.o
- xmake_file=x-interix
- if test x$enable_threads = xyes ; then
- thread_file='posix'
- fi
- if test x$stabs = xyes ; then
- tm_file="${tm_file} dbxcoff.h"
- fi
- ;;
- i[34567]86-*-winnt3*)
- tm_file=i386/win-nt.h
- out_file=i386/i386.c
- xm_file="xm-winnt.h ${xm_file}"
- xmake_file=winnt/x-winnt
- tmake_file=i386/t-winnt
- extra_host_objs="winnt.o oldnames.o"
- extra_gcc_objs="spawnv.o oldnames.o"
- if test x$gnu_ld != xyes
- then
- extra_programs=ld.exe
- fi
- if test x$enable_threads = xyes; then
- thread_file='win32'
- fi
- ;;
- i[34567]86-dg-dgux*)
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG POSIX"
- out_file=i386/dgux.c
- tm_file=i386/dgux.h
- tmake_file=i386/t-dgux
- xmake_file=i386/x-dgux
- install_headers_dir=install-headers-cpio
- ;;
- i860-alliant-*) # Alliant FX/2800
- tm_file="${tm_file} svr4.h i860/sysv4.h i860/fx2800.h"
- xm_file="${xm_file}"
- xmake_file=i860/x-fx2800
- tmake_file=i860/t-fx2800
- extra_parts="crtbegin.o crtend.o"
- ;;
- i860-*-bsd*)
- tm_file="${tm_file} i860/bsd.h"
- if test x$gas = xyes
- then
- tm_file="${tm_file} i860/bsd-gas.h"
- fi
- use_collect2=yes
- ;;
- i860-*-mach*)
- tm_file="${tm_file} i860/mach.h"
- tmake_file=t-libc-ok
- ;;
- i860-*-osf*) # Intel Paragon XP/S, OSF/1AD
- tm_file="${tm_file} svr3.h i860/paragon.h"
- xm_defines="USG SVR3"
- tmake_file=t-osf
- ;;
- i860-*-sysv3*)
- tm_file="${tm_file} svr3.h i860/sysv3.h"
- xm_defines="USG SVR3"
- xmake_file=i860/x-sysv3
- extra_parts="crtbegin.o crtend.o"
- ;;
- i860-*-sysv4*)
- tm_file="${tm_file} svr4.h i860/sysv4.h"
- xm_defines="USG SVR3"
- xmake_file=i860/x-sysv4
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- ;;
- i960-wrs-vxworks5 | i960-wrs-vxworks5.0*)
- tm_file="${tm_file} i960/vx960.h"
- tmake_file=i960/t-vxworks960
- use_collect2=yes
- thread_file='vxworks'
- ;;
- i960-wrs-vxworks5* | i960-wrs-vxworks)
- tm_file="${tm_file} dbxcoff.h i960/i960-coff.h i960/vx960-coff.h"
- tmake_file=i960/t-vxworks960
- use_collect2=yes
- thread_file='vxworks'
- ;;
- i960-wrs-vxworks*)
- tm_file="${tm_file} i960/vx960.h"
- tmake_file=i960/t-vxworks960
- use_collect2=yes
- thread_file='vxworks'
- ;;
- i960-*-coff*)
- tm_file="${tm_file} dbxcoff.h i960/i960-coff.h libgloss.h"
- tmake_file=i960/t-960bare
- use_collect2=yes
- ;;
- i960-*-rtems)
- tmake_file="i960/t-960bare t-rtems"
- tm_file="${tm_file} dbxcoff.h i960/rtems.h"
- use_collect2=yes
- ;;
- i960-*-*) # Default i960 environment.
- use_collect2=yes
- ;;
- ia64*-*-elf*)
- tm_file=ia64/elf.h
- tmake_file="ia64/t-ia64"
- target_cpu_default="0"
- if test x$gas = xyes
- then
- target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
- fi
- if test x$gnu_ld = xyes
- then
- target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
- fi
- ;;
- ia64*-*-linux*)
- tm_file=ia64/linux.h
- tmake_file="t-linux ia64/t-ia64"
- target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
- m32r-*-elf*)
- extra_parts="crtinit.o crtfini.o"
- ;;
- m68000-convergent-sysv*)
- tm_file=m68k/ctix.h
- xm_file="m68k/xm-3b1.h ${xm_file}"
- xm_defines=USG
- use_collect2=yes
- extra_headers=math-68881.h
- ;;
- m68000-hp-bsd*) # HP 9000/200 running BSD
- tm_file=m68k/hp2bsd.h
- xmake_file=m68k/x-hp2bsd
- use_collect2=yes
- extra_headers=math-68881.h
- ;;
- m68000-hp-hpux*) # HP 9000 series 300
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG"
- if test x$gas = xyes
- then
- xmake_file=m68k/x-hp320g
- tm_file=m68k/hp310g.h
- else
- xmake_file=m68k/x-hp320
- tm_file=m68k/hp310.h
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- extra_headers=math-68881.h
- ;;
- m68000-sun-sunos3*)
- tm_file=m68k/sun2.h
- use_collect2=yes
- extra_headers=math-68881.h
- ;;
- m68000-sun-sunos4*)
- tm_file=m68k/sun2o4.h
- use_collect2=yes
- extra_headers=math-68881.h
- ;;
- m68000-att-sysv*)
- xm_file="m68k/xm-3b1.h ${xm_file}"
- xm_defines=USG
- if test x$gas = xyes
- then
- tm_file=m68k/3b1g.h
- else
- tm_file=m68k/3b1.h
- fi
- use_collect2=yes
- extra_headers=math-68881.h
- ;;
- m68k-apple-aux*) # Apple Macintosh running A/UX
- xm_defines="USG AUX"
- tmake_file=m68k/t-aux
- install_headers_dir=install-headers-cpio
- extra_headers=math-68881.h
- extra_parts="crt1.o mcrt1.o maccrt1.o crt2.o crtn.o"
- tm_file=
- if test "$gnu_ld" = yes
- then
- tm_file="${tm_file} m68k/auxgld.h"
- else
- tm_file="${tm_file} m68k/auxld.h"
- fi
- if test "$gas" = yes
- then
- tm_file="${tm_file} m68k/auxgas.h"
- else
- tm_file="${tm_file} m68k/auxas.h"
- fi
- tm_file="${tm_file} m68k/a-ux.h"
- float_format=m68k
- ;;
- m68k-apollo-*)
- tm_file=m68k/apollo68.h
- xmake_file=m68k/x-apollo68
- use_collect2=yes
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-altos-sysv*) # Altos 3068
- if test x$gas = xyes
- then
- tm_file=m68k/altos3068.h
- xm_defines=USG
- else
- echo "The Altos is supported only with the GNU assembler" 1>&2
- exit 1
- fi
- extra_headers=math-68881.h
- ;;
- m68k-bull-sysv*) # Bull DPX/2
- if test x$gas = xyes
- then
- if test x$stabs = xyes
- then
- tm_file=m68k/dpx2cdbx.h
- else
- tm_file=m68k/dpx2g.h
- fi
- else
- tm_file=m68k/dpx2.h
- fi
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines=USG
- xmake_file=m68k/x-dpx2
- use_collect2=yes
- extra_headers=math-68881.h
- ;;
- m68k-atari-sysv4*) # Atari variant of V.4.
- tm_file=m68k/atari.h
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG FULL_PROTOTYPES"
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-motorola-sysv*)
- tm_file=m68k/mot3300.h
- xm_file="xm-alloca.h m68k/xm-mot3300.h ${xm_file}"
- if test x$gas = xyes
- then
- xmake_file=m68k/x-mot3300-gas
- if test x$gnu_ld = xyes
- then
- tmake_file=m68k/t-mot3300-gald
- else
- tmake_file=m68k/t-mot3300-gas
- use_collect2=yes
- fi
- else
- xmake_file=m68k/x-mot3300
- if test x$gnu_ld = xyes
- then
- tmake_file=m68k/t-mot3300-gld
- else
- tmake_file=m68k/t-mot3300
- use_collect2=yes
- fi
- fi
- gdb_needs_out_file_path=yes
- extra_parts="crt0.o mcrt0.o"
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-ncr-sysv*) # NCR Tower 32 SVR3
- tm_file=m68k/tower-as.h
- xm_defines="USG SVR3"
- xmake_file=m68k/x-tower
- extra_parts="crtbegin.o crtend.o"
- extra_headers=math-68881.h
- ;;
- m68k-plexus-sysv*)
- tm_file=m68k/plexus.h
- xm_file="xm-alloca.h m68k/xm-plexus.h ${xm_file}"
- xm_defines=USG
- use_collect2=yes
- extra_headers=math-68881.h
- ;;
- m68k-tti-*)
- tm_file=m68k/pbb.h
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines=USG
- extra_headers=math-68881.h
- ;;
- m68k-crds-unos*)
- xm_file="xm-alloca.h m68k/xm-crds.h ${xm_file}"
- xm_defines="USG unos"
- xmake_file=m68k/x-crds
- tm_file=m68k/crds.h
- use_collect2=yes
- extra_headers=math-68881.h
- ;;
- m68k-cbm-sysv4*) # Commodore variant of V.4.
- tm_file=m68k/amix.h
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG FULL_PROTOTYPES"
- xmake_file=m68k/x-amix
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-ccur-rtu)
- tm_file=m68k/ccur-GAS.h
- xmake_file=m68k/x-ccur
- extra_headers=math-68881.h
- use_collect2=yes
- float_format=m68k
- ;;
- m68k-hp-bsd4.4*) # HP 9000/3xx running 4.4bsd
- tm_file=m68k/hp3bsd44.h
- xmake_file=m68k/x-hp3bsd44
- use_collect2=yes
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-hp-bsd*) # HP 9000/3xx running Berkeley Unix
- tm_file=m68k/hp3bsd.h
- use_collect2=yes
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-isi-bsd*)
- if test x$with_fp = xno
- then
- tm_file=m68k/isi-nfp.h
- else
- tm_file=m68k/isi.h
- float_format=m68k
- fi
- use_collect2=yes
- extra_headers=math-68881.h
- ;;
- m68k-hp-hpux7*) # HP 9000 series 300 running HPUX version 7.
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG"
- if test x$gas = xyes
- then
- xmake_file=m68k/x-hp320g
- tm_file=m68k/hp320g.h
- else
- xmake_file=m68k/x-hp320
- tm_file=m68k/hpux7.h
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-hp-hpux*) # HP 9000 series 300
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines="USG"
- if test x$gas = xyes
- then
- xmake_file=m68k/x-hp320g
- tm_file=m68k/hp320g.h
- else
- xmake_file=m68k/x-hp320
- tm_file=m68k/hp320.h
- fi
- install_headers_dir=install-headers-cpio
- use_collect2=yes
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-sun-mach*)
- tm_file=m68k/sun3mach.h
- use_collect2=yes
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-sony-newsos3*)
- if test x$gas = xyes
- then
- tm_file=m68k/news3gas.h
- else
- tm_file=m68k/news3.h
- fi
- use_collect2=yes
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-sony-bsd* | m68k-sony-newsos*)
- if test x$gas = xyes
- then
- tm_file=m68k/newsgas.h
- else
- tm_file=m68k/news.h
- fi
- use_collect2=yes
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-next-nextstep2*)
- tm_file=m68k/next21.h
- xm_file="m68k/xm-next.h ${xm_file}"
- tmake_file=m68k/t-next
- xmake_file=m68k/x-next
- extra_objs=nextstep.o
- extra_headers=math-68881.h
- use_collect2=yes
- float_format=m68k
- ;;
- m68k-next-nextstep[34]*)
- tm_file=m68k/next.h
- xm_file="m68k/xm-next.h ${xm_file}"
- tmake_file=m68k/t-next
- xmake_file=m68k/x-next
- extra_objs=nextstep.o
- extra_parts="crtbegin.o crtend.o"
- extra_headers=math-68881.h
- float_format=m68k
- if test x$enable_threads = xyes; then
- thread_file='mach'
- fi
- ;;
- m68k-sun-sunos3*)
- if test x$with_fp = xno
- then
- tm_file=m68k/sun3n3.h
- else
- tm_file=m68k/sun3o3.h
- float_format=m68k
- fi
- use_collect2=yes
- extra_headers=math-68881.h
- ;;
- m68k-sun-sunos*) # For SunOS 4 (the default).
- if test x$with_fp = xno
- then
- tm_file=m68k/sun3n.h
- else
- tm_file=m68k/sun3.h
- float_format=m68k
- fi
- use_collect2=yes
- extra_headers=math-68881.h
- ;;
- m68k-wrs-vxworks*)
- tm_file=m68k/vxm68k.h
- tmake_file=m68k/t-vxworks68
- extra_headers=math-68881.h
- thread_file='vxworks'
- float_format=m68k
- ;;
- m68k-*-aout*)
- tmake_file=m68k/t-m68kbare
- tm_file="m68k/m68k-aout.h libgloss.h"
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-*-coff*)
- tmake_file=m68k/t-m68kbare
- tm_file="m68k/m68k-coff.h dbx.h libgloss.h"
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68020-*-elf* | m68k-*-elf*)
- tm_file="m68k/m68020-elf.h"
- xm_file=m68k/xm-m68kv.h
- tmake_file=m68k/t-m68kelf
- header_files=math-68881.h
- ;;
- m68k-*-lynxos*)
- if test x$gas = xyes
- then
- tm_file=m68k/lynx.h
- else
- tm_file=m68k/lynx-ng.h
- fi
- xm_file=m68k/xm-lynx.h
- xmake_file=x-lynx
- tmake_file=m68k/t-lynx
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k*-*-netbsd*)
- tm_file=m68k/netbsd.h
- tmake_file=t-netbsd
- float_format=m68k
- use_collect2=yes
- ;;
- m68k*-*-openbsd*)
- float_format=m68k
- # we need collect2 until our bug is fixed...
- use_collect2=yes
- ;;
- m68k-*-sysv3*) # Motorola m68k's running system V.3
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines=USG
- xmake_file=m68k/x-m68kv
- extra_parts="crtbegin.o crtend.o"
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-*-sysv4*) # Motorola m68k's running system V.4
- tm_file=m68k/m68kv4.h
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines=USG
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-*-linux-gnuaout*) # Motorola m68k's running GNU/Linux
- # with a.out format
- xmake_file=x-linux
- tm_file=m68k/linux-aout.h
- tmake_file="t-linux-aout m68k/t-linux-aout"
- extra_headers=math-68881.h
- float_format=m68k
- gnu_ld=yes
- ;;
- m68k-*-linux-gnulibc1) # Motorola m68k's running GNU/Linux
- # with ELF format using the
- # GNU/Linux C library 5
- xmake_file=x-linux
- tm_file=m68k/linux.h
- tmake_file="t-linux t-linux-gnulibc1 m68k/t-linux"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- extra_headers=math-68881.h
- float_format=m68k
- gnu_ld=yes
- ;;
- m68k-*-linux-gnu*) # Motorola m68k's running GNU/Linux
- # with ELF format using glibc 2
- # aka the GNU/Linux C library 6.
- xmake_file=x-linux
- tm_file=m68k/linux.h
- tmake_file="t-linux m68k/t-linux"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- extra_headers=math-68881.h
- float_format=m68k
- gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
- m68k-*-psos*)
- tmake_file=m68k/t-m68kbare
- tm_file=m68k/m68k-psos.h
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-*-rtemscoff*)
- tmake_file="m68k/t-m68kbare t-rtems"
- tm_file=m68k/rtems.h
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m68k-*-rtemself*|m68k-*-rtems*)
- tmake_file="m68k/t-m68kbare t-rtems m68k/t-crtstuff"
- tm_file=m68k/rtemself.h
- extra_headers=math-68881.h
- float_format=m68k
- ;;
- m88k-dg-dgux*)
- case $machine in
- m88k-dg-dguxbcs*)
- tm_file=m88k/dguxbcs.h
- tmake_file=m88k/t-dguxbcs
- ;;
- *)
- tm_file=m88k/dgux.h
- tmake_file=m88k/t-dgux
- ;;
- esac
- extra_parts="crtbegin.o bcscrtbegin.o crtend.o m88kdgux.ld"
- xmake_file=m88k/x-dgux
- if test x$gas = xyes
- then
- tmake_file=m88k/t-dgux-gas
- fi
- ;;
- m88k-dolphin-sysv3*)
- tm_file=m88k/dolph.h
- extra_parts="crtbegin.o crtend.o"
- xm_file="m88k/xm-sysv3.h ${xm_file}"
- xmake_file=m88k/x-dolph
- if test x$gas = xyes
- then
- tmake_file=m88k/t-m88k-gas
- fi
- ;;
- m88k-tektronix-sysv3)
- tm_file=m88k/tekXD88.h
- extra_parts="crtbegin.o crtend.o"
- xm_file="m88k/xm-sysv3.h ${xm_file}"
- xmake_file=m88k/x-tekXD88
- if test x$gas = xyes
- then
- tmake_file=m88k/t-m88k-gas
- fi
- ;;
- m88k-*-aout*)
- tm_file=m88k/m88k-aout.h
- ;;
- m88k-*-coff*)
- tm_file=m88k/m88k-coff.h
- tmake_file=m88k/t-bug
- ;;
- m88k-*-luna*)
- tm_file=m88k/luna.h
- extra_parts="crtbegin.o crtend.o"
- if test x$gas = xyes
- then
- tmake_file=m88k/t-luna-gas
- else
- tmake_file=m88k/t-luna
- fi
- ;;
- m88k-*-openbsd*)
- tmake_file="${tmake_file} m88k/t-luna-gas"
- ;;
- m88k-*-sysv3*)
- tm_file=m88k/sysv3.h
- extra_parts="crtbegin.o crtend.o"
- xm_file="m88k/xm-sysv3.h ${xm_file}"
- xmake_file=m88k/x-sysv3
- if test x$gas = xyes
- then
- tmake_file=m88k/t-m88k-gas
- fi
- ;;
- m88k-*-sysv4*)
- tm_file=m88k/sysv4.h
- extra_parts="crtbegin.o crtend.o"
- xmake_file=m88k/x-sysv4
- tmake_file=m88k/t-sysv4
- ;;
- mcore-*-elf)
- tm_file=mcore/mcore-elf.h
- tmake_file=mcore/t-mcore
- ;;
- mcore-*-pe*)
- tm_file=mcore/mcore-pe.h
- tmake_file=mcore/t-mcore-pe
- ;;
- mips-sgi-irix6*) # SGI System V.4., IRIX 6
- if test "x$gnu_ld" = xyes
- then
- tm_file="mips/iris6.h mips/iris6gld.h"
- else
- tm_file=mips/iris6.h
- fi
- tmake_file=mips/t-iris6
- xm_file=mips/xm-iris6.h
- xmake_file=mips/x-iris6
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- ;;
- mips-wrs-vxworks)
- tm_file="mips/elf.h mips/vxworks.h"
- tmake_file=mips/t-ecoff
- gas=yes
- gnu_ld=yes
- extra_parts="crtbegin.o crtend.o"
- thread_file='vxworks'
- ;;
- mips-sgi-irix5cross64) # Irix5 host, Irix 6 target, cross64
- tm_file="mips/iris6.h mips/cross64.h"
- xm_defines=USG
- xm_file="mips/xm-iris5.h"
- xmake_file=mips/x-iris
- tmake_file=mips/t-cross64
- # See comment in mips/iris[56].h files.
- use_collect2=yes
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- ;;
- mips-sni-sysv4)
- if test x$gas = xyes
- then
- if test x$stabs = xyes
- then
- tm_file=mips/iris5gdb.h
- else
- tm_file="mips/sni-svr4.h mips/sni-gas.h"
- fi
- else
- tm_file=mips/sni-svr4.h
- fi
- xm_defines=USG
- xmake_file=mips/x-sni-svr4
- tmake_file=mips/t-mips-gas
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mips-sgi-irix5*) # SGI System V.4., IRIX 5
- if test x$gas = xyes
- then
- tm_file="mips/iris5.h mips/iris5gas.h"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- else
- tm_file=mips/iris5.h
- fi
- xm_defines=USG
- xm_file="mips/xm-iris5.h"
- xmake_file=mips/x-iris
- # mips-tfile doesn't work yet
- tmake_file=mips/t-mips-gas
- # See comment in mips/iris5.h file.
- use_collect2=yes
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- ;;
- mips-sgi-irix4loser*) # Mostly like a MIPS.
- tm_file="mips/iris4loser.h mips/iris3.h ${tm_file} mips/iris4.h"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=USG
- xmake_file=mips/x-iris
- if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- ;;
- mips-sgi-irix4*) # Mostly like a MIPS.
- tm_file="mips/iris3.h ${tm_file} mips/iris4.h"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=USG
- xmake_file=mips/x-iris
- if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- ;;
- mips-sgi-*) # Mostly like a MIPS.
- tm_file="mips/iris3.h ${tm_file}"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=USG
- xmake_file=mips/x-iris3
- if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mips-dec-osfrose*) # Decstation running OSF/1 reference port with OSF/rose.
- tm_file="mips/osfrose.h ${tm_file}"
- xmake_file=mips/x-osfrose
- tmake_file=mips/t-osfrose
- extra_objs=halfpic.o
- use_collect2=yes
- ;;
- mips-dec-osf*) # Decstation running OSF/1 as shipped by DIGITAL
- tm_file=mips/dec-osf1.h
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xmake_file=mips/x-dec-osf1
- if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
- else
- tmake_file=mips/t-ultrix
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mips-dec-bsd*) # Decstation running 4.4 BSD
- tm_file=mips/dec-bsd.h
- if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
- else
- tmake_file=mips/t-ultrix
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mipsel-*-netbsd* | mips-dec-netbsd*) # Decstation running NetBSD
- tm_file=mips/netbsd.h
- # On NetBSD, the headers are already okay, except for math.h.
- tmake_file=t-netbsd
- ;;
- mips*-*-linux*) # Linux MIPS, either endian.
- xmake_file=x-linux
- case $machine in
- mipsel-*) tm_file="mips/elfl.h mips/linux.h" ;;
- *) tm_file="mips/elf.h mips/linux.h" ;;
- esac
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- gas=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
- mips*el-*-openbsd*) # mips little endian
- target_cpu_default="MASK_GAS|MASK_ABICALLS"
- ;;
- mips*-*-openbsd*) # mips big endian
- target_cpu_default="MASK_GAS|MASK_ABICALLS"
- tm_file="mips/openbsd-be.h ${tm_file}"
- ;;
- mips-sony-bsd* | mips-sony-newsos*) # Sony NEWS 3600 or risc/news.
- tm_file="mips/news4.h ${tm_file}"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- xmake_file=mips/x-sony
- ;;
- mips-sony-sysv*) # Sony NEWS 3800 with NEWSOS5.0.
- # That is based on svr4.
- # t-svr4 is not right because this system doesn't use ELF.
- tm_file="mips/news5.h ${tm_file}"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=USG
- if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mips-tandem-sysv4*) # Tandem S2 running NonStop UX
- tm_file="mips/svr4-5.h mips/svr4-t.h"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=USG
- xmake_file=mips/x-sysv
- if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
- extra_parts="crtbegin.o crtend.o"
- else
- tmake_file=mips/t-mips
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mips-*-ultrix* | mips-dec-mach3) # Decstation.
- tm_file="mips/ultrix.h ${tm_file}"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xmake_file=mips/x-ultrix
- if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
- else
- tmake_file=mips/t-ultrix
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mips-*-riscos[56789]bsd*)
- tm_file=mips/bsd-5.h # MIPS BSD 4.3, RISC-OS 5.0
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas = xyes
- then
- tmake_file=mips/t-bsd-gas
- else
- tmake_file=mips/t-bsd
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mips-*-bsd* | mips-*-riscosbsd* | mips-*-riscos[1234]bsd*)
- tm_file="mips/bsd-4.h ${tm_file}" # MIPS BSD 4.3, RISC-OS 4.0
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas = xyes
- then
- tmake_file=mips/t-bsd-gas
- else
- tmake_file=mips/t-bsd
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mips-*-riscos[56789]sysv4*)
- tm_file=mips/svr4-5.h # MIPS System V.4., RISC-OS 5.0
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xmake_file=mips/x-sysv
- if test x$gas = xyes
- then
- tmake_file=mips/t-svr4-gas
- else
- tmake_file=mips/t-svr4
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mips-*-sysv4* | mips-*-riscos[1234]sysv4* | mips-*-riscossysv4*)
- tm_file="mips/svr4-4.h ${tm_file}"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=USG
- xmake_file=mips/x-sysv
- if test x$gas = xyes
- then
- tmake_file=mips/t-svr4-gas
- else
- tmake_file=mips/t-svr4
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mips-*-riscos[56789]sysv*)
- tm_file=mips/svr3-5.h # MIPS System V.3, RISC-OS 5.0
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=USG
- xmake_file=mips/x-sysv
- if test x$gas = xyes
- then
- tmake_file=mips/t-svr3-gas
- else
- tmake_file=mips/t-svr3
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mips-*-sysv* | mips-*-riscos*sysv*)
- tm_file="mips/svr3-4.h ${tm_file}"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- xm_defines=USG
- xmake_file=mips/x-sysv
- if test x$gas = xyes
- then
- tmake_file=mips/t-svr3-gas
- else
- tmake_file=mips/t-svr3
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mips-*-riscos[56789]*) # Default MIPS RISC-OS 5.0.
- tm_file=mips/mips-5.h
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mips-*-gnu*)
- ;;
- mipsel-*-ecoff*)
- tm_file=mips/ecoffl.h
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file=mips/t-ecoff
- ;;
- mips-*-ecoff*)
- tm_file="gofast.h mips/ecoff.h"
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- tmake_file=mips/t-ecoff
- ;;
- mipsel-*-elf*)
- tm_file="mips/elfl.h"
- tmake_file=mips/t-elf
- ;;
- mips-*-elf*)
- tm_file="mips/elf.h"
- tmake_file=mips/t-elf
- ;;
- mips64el-*-elf*)
- tm_file="mips/elfl64.h"
- tmake_file=mips/t-elf
- ;;
- mips64orionel-*-elf*)
- tm_file="mips/elforion.h mips/elfl64.h"
- tmake_file=mips/t-elf
- ;;
- mips64-*-elf*)
- tm_file="mips/elf64.h"
- tmake_file=mips/t-elf
- ;;
- mips64orion-*-elf*)
- tm_file="mips/elforion.h mips/elf64.h"
- tmake_file=mips/t-elf
- ;;
- mips64orion-*-rtems*)
- tm_file="mips/elforion.h mips/elf64.h mips/rtems64.h"
- tmake_file="mips/t-elf t-rtems"
- ;;
- mipstx39el-*-elf*)
- tm_file="mips/r3900.h mips/elfl.h mips/abi64.h"
- tmake_file=mips/t-r3900
- ;;
- mipstx39-*-elf*)
- tm_file="mips/r3900.h mips/elf.h mips/abi64.h"
- tmake_file=mips/t-r3900
- ;;
- mips-*-*) # Default MIPS RISC-OS 4.0.
- if test x$stabs = xyes; then
- tm_file="${tm_file} dbx.h"
- fi
- if test x$gas = xyes
- then
- tmake_file=mips/t-mips-gas
- else
- extra_passes="mips-tfile mips-tdump"
- fi
- if test x$gnu_ld != xyes
- then
- use_collect2=yes
- fi
- ;;
- mn10200-*-*)
- float_format=i32
- cpu_type=mn10200
- tm_file="mn10200/mn10200.h"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- use_collect2=no
- ;;
- mn10300-*-*)
- cpu_type=mn10300
- tm_file="mn10300/mn10300.h"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- use_collect2=no
- ;;
- ns32k-encore-bsd*)
- tm_file=ns32k/encore.h
- use_collect2=yes
- ;;
- ns32k-sequent-bsd*)
- tm_file=ns32k/sequent.h
- use_collect2=yes
- ;;
- ns32k-tek6100-bsd*)
- tm_file=ns32k/tek6100.h
- use_collect2=yes
- ;;
- ns32k-tek6200-bsd*)
- tm_file=ns32k/tek6200.h
- use_collect2=yes
- ;;
-# This has not been updated to GCC 2.
-# ns32k-ns-genix*)
-# xm_defines=USG
-# xmake_file=ns32k/x-genix
-# tm_file=ns32k/genix.h
-# use_collect2=yes
-# ;;
- ns32k-merlin-*)
- tm_file=ns32k/merlin.h
- use_collect2=yes
- ;;
- ns32k-pc532-mach*)
- tm_file=ns32k/pc532-mach.h
- use_collect2=yes
- ;;
- ns32k-pc532-minix*)
- tm_file=ns32k/pc532-min.h
- xm_file="ns32k/xm-pc532-min.h ${xm-file}"
- xm_defines=USG
- use_collect2=yes
- ;;
- ns32k-*-netbsd*)
- tm_file=ns32k/netbsd.h
- xm_file="ns32k/xm-netbsd.h ${xm_file}"
- # On NetBSD, the headers are already okay, except for math.h.
- tmake_file=t-netbsd
- use_collect2=yes
- ;;
- pdp11-*-bsd)
- tm_file="${tm_file} pdp11/2bsd.h"
- ;;
- pdp11-*-*)
- ;;
- avr-*-*)
- ;;
- ns32k-*-openbsd*)
- # Nothing special
- ;;
-# This has not been updated to GCC 2.
-# pyramid-*-*)
-# cpu_type=pyr
-# xmake_file=pyr/x-pyr
-# use_collect2=yes
-# ;;
-
- pj*-linux*)
- tm_file="svr4.h pj/linux.h ${tm_file}"
- ;;
- pj-*)
- ;;
- pjl-*)
- tm_file="svr4.h pj/pjl.h ${tm_file}"
- ;;
-
- romp-*-aos*)
- use_collect2=yes
- ;;
- romp-*-mach*)
- xmake_file=romp/x-mach
- use_collect2=yes
- ;;
- romp-*-openbsd*)
- # Nothing special
- ;;
- powerpc-*-openbsd*)
- tmake_file="${tmake_file} rs6000/t-rs6000 rs6000/t-openbsd"
- ;;
- powerpc-*-beos*)
- cpu_type=rs6000
- tm_file=rs6000/beos.h
- xm_file=rs6000/xm-beos.h
- tmake_file=rs6000/t-beos
- xmake_file=rs6000/x-beos
- ;;
- powerpc-*-sysv*)
- tm_file=rs6000/sysv4.h
- xm_file="rs6000/xm-sysv4.h"
- xm_defines="USG POSIX"
- extra_headers=ppc-asm.h
- tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
- xmake_file=rs6000/x-sysv4
- ;;
- powerpc-*-eabiaix*)
- tm_file="rs6000/sysv4.h rs6000/eabi.h rs6000/eabiaix.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_headers=ppc-asm.h
- ;;
- powerpc-*-eabisim*)
- tm_file="rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_headers=ppc-asm.h
- ;;
- powerpc-*-elf*)
- tm_file="rs6000/sysv4.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_headers=ppc-asm.h
- ;;
- powerpc-*-eabi*)
- tm_file="rs6000/sysv4.h rs6000/eabi.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_headers=ppc-asm.h
- ;;
- powerpc-*-rtems*)
- tm_file="rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h"
- tmake_file="rs6000/t-ppcgas t-rtems rs6000/t-ppccomm"
- extra_headers=ppc-asm.h
- ;;
- powerpc-*-linux-gnulibc1)
- tm_file="rs6000/sysv4.h rs6000/linux.h"
- xm_file=rs6000/xm-sysv4.h
- out_file=rs6000/rs6000.c
- tmake_file="rs6000/t-ppcos t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
- xmake_file=x-linux
- extra_headers=ppc-asm.h
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
- powerpc-*-linux-gnu*)
- tm_file="rs6000/sysv4.h rs6000/linux.h"
- xm_file="rs6000/xm-sysv4.h"
- xm_defines="USG ${xm_defines}"
- out_file=rs6000/rs6000.c
- tmake_file="rs6000/t-ppcos t-linux rs6000/t-ppccomm"
- xmake_file=x-linux
- extra_headers=ppc-asm.h
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
- powerpc-wrs-vxworks*)
- cpu_type=rs6000
- xm_file="rs6000/xm-sysv4.h"
- xm_defines="USG POSIX"
- tm_file="rs6000/sysv4.h rs6000/vxppc.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_headers=ppc-asm.h
- thread_file='vxworks'
- ;;
- powerpcle-wrs-vxworks*)
- cpu_type=rs6000
- xm_file="rs6000/xm-sysv4.h"
- xm_defines="USG POSIX"
- tm_file="rs6000/sysv4.h rs6000/sysv4le.h rs6000/vxppc.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_headers=ppc-asm.h
- thread_file='vxworks'
- ;;
- powerpcle-*-sysv*)
- tm_file="rs6000/sysv4.h rs6000/sysv4le.h"
- xm_file="rs6000/xm-sysv4.h"
- xm_defines="USG POSIX"
- tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
- xmake_file=rs6000/x-sysv4
- extra_headers=ppc-asm.h
- ;;
- powerpcle-*-elf*)
- tm_file="rs6000/sysv4.h rs6000/sysv4le.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_headers=ppc-asm.h
- ;;
- powerpcle-*-eabisim*)
- tm_file="rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_headers=ppc-asm.h
- ;;
- powerpcle-*-eabi*)
- tm_file="rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
- tmake_file="rs6000/t-ppcgas rs6000/t-ppccomm"
- extra_headers=ppc-asm.h
- ;;
- powerpcle-*-solaris2*)
- tm_file="rs6000/sysv4.h rs6000/sysv4le.h rs6000/sol2.h"
- xm_file="rs6000/xm-sysv4.h"
- xm_defines="USG POSIX"
- tmake_file="rs6000/t-ppcos rs6000/t-ppccomm"
- xmake_file=rs6000/x-sysv4
- extra_headers=ppc-asm.h
- ;;
- rs6000-ibm-aix3.[01]*)
- tm_file=rs6000/aix31.h
- xmake_file=rs6000/x-aix31
- float_format=none
- use_collect2=yes
- ;;
- rs6000-ibm-aix3.2.[456789]* | powerpc-ibm-aix3.2.[456789]*)
- tm_file=rs6000/aix3newas.h
- if test x$host != x$target
- then
- tmake_file=rs6000/t-xnewas
- else
- tmake_file=rs6000/t-newas
- fi
- float_format=none
- use_collect2=yes
- ;;
- rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
- tm_file=rs6000/aix41.h
- if test x$host != x$target
- then
- tmake_file=rs6000/t-xnewas
- else
- tmake_file=rs6000/t-newas
- fi
- if test "$gnu_ld" = yes
- then
- xmake_file=rs6000/x-aix41-gld
- else
- tmake_file="rs6000/t-newas rs6000/t-aix41"
- fi
- xmake_file=rs6000/x-aix41
- float_format=none
- use_collect2=yes
- ;;
- rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
- tm_file=rs6000/aix43.h
- tmake_file=rs6000/t-aix43
- xmake_file=rs6000/x-aix41
- float_format=none
- use_collect2=yes
- ;;
- rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
- tm_file=rs6000/aix43.h
- tmake_file=rs6000/t-aix43
- xmake_file=rs6000/x-aix41
- float_format=none
- use_collect2=yes
- ;;
- rs6000-ibm-aix*)
- float_format=none
- use_collect2=yes
- ;;
- rs6000-bull-bosx)
- float_format=none
- use_collect2=yes
- ;;
- rs6000-*-mach*)
- tm_file=rs6000/mach.h
- xm_file="${xm_file} rs6000/xm-mach.h"
- xmake_file=rs6000/x-mach
- use_collect2=yes
- ;;
- rs6000-*-lynxos*)
- tm_file=rs6000/lynx.h
- xm_file=rs6000/xm-lynx.h
- tmake_file=rs6000/t-rs6000
- xmake_file=rs6000/x-lynx
- use_collect2=yes
- ;;
- sh-*-elf*)
- tm_file=sh/elf.h
- float_format=sh
- ;;
- sh-*-rtemself*)
- tmake_file="sh/t-sh t-rtems"
- tm_file=sh/rtemself.h
- float_format=sh
- ;;
- sh-*-rtems*)
- tmake_file="sh/t-sh t-rtems"
- tm_file=sh/rtems.h
- float_format=sh
- ;;
- sh-*-*)
- float_format=sh
- ;;
- sparc-tti-*)
- tm_file=sparc/pbd.h
- xm_file="xm-alloca.h ${xm_file}"
- xm_defines=USG
- ;;
- sparc-wrs-vxworks* | sparclite-wrs-vxworks*)
- tm_file=sparc/vxsparc.h
- tmake_file=sparc/t-vxsparc
- use_collect2=yes
- thread_file='vxworks'
- ;;
- sparc-*-aout*)
- tmake_file=sparc/t-sparcbare
- tm_file="sparc/aout.h libgloss.h"
- ;;
- sparc-*-netbsd*)
- tm_file=sparc/netbsd.h
- tmake_file=t-netbsd
- use_collect2=yes
- ;;
- sparc-*-openbsd*)
- # we need collect2 until our bug is fixed...
- use_collect2=yes
- ;;
- sparc-*-bsd*)
- tm_file=sparc/bsd.h
- ;;
- sparc-*-elf*)
- tm_file=sparc/elf.h
- tmake_file=sparc/t-elf
- extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- #float_format=i128
- float_format=i64
- ;;
- sparc-*-linux-gnuaout*) # Sparc's running GNU/Linux, a.out
- xm_file="${xm_file} sparc/xm-linux.h"
- tm_file=sparc/linux-aout.h
- xmake_file=x-linux
- gnu_ld=yes
- ;;
- sparc-*-linux-gnulibc1*) # Sparc's running GNU/Linux, libc5
- xm_file="${xm_file} sparc/xm-linux.h"
- xmake_file=x-linux
- tm_file=sparc/linux.h
- tmake_file="t-linux t-linux-gnulibc1"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- float_format=sparc
- ;;
- sparc-*-linux-gnu*) # Sparc's running GNU/Linux, libc6
- xm_file="${xm_file} sparc/xm-linux.h"
- xmake_file=x-linux
- tm_file=sparc/linux.h
- tmake_file="t-linux"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- float_format=sparc
- ;;
- sparc-*-lynxos*)
- if test x$gas = xyes
- then
- tm_file=sparc/lynx.h
- else
- tm_file=sparc/lynx-ng.h
- fi
- xm_file=sparc/xm-lynx.h
- tmake_file=sparc/t-sunos41
- xmake_file=x-lynx
- ;;
- sparc-*-rtemsaout*)
- tmake_file="sparc/t-sparcbare t-rtems"
- tm_file=sparc/rtems.h
- ;;
- sparc-*-rtems*|sparc-*-rtemself*)
- tm_file="sparc/rtemself.h"
- tmake_file="sparc/t-elf t-rtems"
- extra_parts="crti.o crtn.o crtbegin.o crtend.o"
- #float_format=i128
- float_format=i64
- ;;
- sparcv9-*-solaris2*)
- if test x$gnu_ld = xyes
- then
- tm_file=sparc/sol2-64.h
- else
- tm_file=sparc/sol2-sld-64.h
- fi
- xm_file="sparc/xm-sysv4-64.h sparc/xm-sol2.h"
- xm_defines="USG POSIX"
- tmake_file="sparc/t-sol2 sparc/t-sol2-64"
- xmake_file=sparc/x-sysv4
- extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
- float_format=none
- if test x${enable_threads} = x ; then
- enable_threads=$have_pthread_h
- if test x${enable_threads} = x ; then
- enable_threads=$have_thread_h
- fi
- fi
- if test x${enable_threads} = xyes ; then
- if test x${have_pthread_h} = xyes ; then
- thread_file='posix'
- else
- thread_file='solaris'
- fi
- fi
- ;;
- sparc-hal-solaris2*)
- xm_file="sparc/xm-sysv4.h sparc/xm-sol2.h"
- xm_defines="USG POSIX"
- tm_file="sparc/sol2.h sparc/hal.h"
- tmake_file="sparc/t-halos sparc/t-sol2"
- xmake_file=sparc/x-sysv4
- extra_parts="crt1.o crti.o crtn.o gmon.o crtbegin.o crtend.o"
- case $machine in
- *-*-solaris2.[0-4])
- float_format=i128
- ;;
- *)
- float_format=none
- ;;
- esac
- thread_file='solaris'
- ;;
- sparc-*-solaris2*)
- if test x$gnu_ld = xyes
- then
- tm_file=sparc/sol2.h
- else
- tm_file=sparc/sol2-sld.h
- fi
- xm_file="sparc/xm-sysv4.h sparc/xm-sol2.h"
- xm_defines="USG POSIX"
- tmake_file=sparc/t-sol2
- xmake_file=sparc/x-sysv4
- extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
- case $machine in
- *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*) ;;
- *-*-solaris2*)
- if test x$gnu_ld = xyes
- then
- tm_file=sparc/sol2-64.h
- else
- tm_file=sparc/sol2-sld-64.h
- fi
- tmake_file="$tmake_file sparc/t-sol2-64"
- ;;
- esac
- case $machine in
- *-*-solaris2.[0-4])
- float_format=i128
- ;;
- *)
- float_format=none
- ;;
- esac
- if test x${enable_threads} = x; then
- enable_threads=$have_pthread_h
- if test x${enable_threads} = x; then
- enable_threads=$have_thread_h
- fi
- fi
- if test x${enable_threads} = xyes; then
- if test x${have_pthread_h} = xyes; then
- thread_file='posix'
- else
- thread_file='solaris'
- fi
- fi
- ;;
- sparc-*-sunos4.0*)
- tm_file=sparc/sunos4.h
- tmake_file=sparc/t-sunos40
- use_collect2=yes
- ;;
- sparc-*-sunos4*)
- tm_file=sparc/sunos4.h
- tmake_file=sparc/t-sunos41
- use_collect2=yes
- if test x$gas = xyes; then
- tm_file="${tm_file} sparc/sun4gas.h"
- fi
- ;;
- sparc-*-sunos3*)
- tm_file=sparc/sun4o3.h
- use_collect2=yes
- ;;
- sparc-*-sysv4*)
- tm_file=sparc/sysv4.h
- xm_file="sparc/xm-sysv4.h"
- xm_defines="USG POSIX"
- tmake_file=t-svr4
- xmake_file=sparc/x-sysv4
- extra_parts="crtbegin.o crtend.o"
- ;;
- sparc-*-vxsim*)
- xm_file="sparc/xm-sysv4.h sparc/xm-sol2.h"
- xm_defines="USG POSIX"
- tm_file=sparc/vxsim.h
- tmake_file=sparc/t-vxsparc
- xmake_file=sparc/x-sysv4
- ;;
- sparclet-*-aout*)
- tm_file="sparc/splet.h libgloss.h"
- tmake_file=sparc/t-splet
- ;;
- sparclite-*-coff*)
- tm_file="sparc/litecoff.h libgloss.h"
- tmake_file=sparc/t-sparclite
- ;;
- sparclite-*-aout*)
- tm_file="sparc/lite.h aoutos.h libgloss.h"
- tmake_file=sparc/t-sparclite
- ;;
- sparclite-*-elf*)
- tm_file="sparc/liteelf.h"
- tmake_file=sparc/t-sparclite
- extra_parts="crtbegin.o crtend.o"
- ;;
- sparc86x-*-aout*)
- tm_file="sparc/sp86x-aout.h aoutos.h libgloss.h"
- tmake_file=sparc/t-sp86x
- ;;
- sparc86x-*-elf*)
- tm_file="sparc/sp86x-elf.h"
- tmake_file=sparc/t-sp86x
- extra_parts="crtbegin.o crtend.o"
- ;;
- sparc64-*-aout*)
- tmake_file=sparc/t-sp64
- tm_file=sparc/sp64-aout.h
- ;;
- sparc64-*-elf*)
- tmake_file=sparc/t-sp64
- tm_file=sparc/sp64-elf.h
- extra_parts="crtbegin.o crtend.o"
- ;;
- sparc64-*-linux*) # 64-bit Sparc's running GNU/Linux
- tmake_file="t-linux sparc/t-linux64"
- xm_file="sparc/xm-sp64.h sparc/xm-linux.h"
- tm_file=sparc/linux64.h
- xmake_file=x-linux
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- float_format=sparc
- ;;
-# This hasn't been upgraded to GCC 2.
-# tahoe-harris-*) # Harris tahoe, using COFF.
-# tm_file=tahoe/harris.h
-# ;;
-# tahoe-*-bsd*) # tahoe running BSD
-# ;;
-
- thumb*-*-*)
- { echo "configure: error:
-*** The Thumb targets have been depreciated. The equivalent
-*** ARM based toolchain can now generated Thumb instructions
-*** when the -mthumb switch is given to the compiler." 1>&2; exit 1; }
- ;;
-# This hasn't been upgraded to GCC 2.
-# tron-*-*)
-# cpu_type=gmicro
-# use_collect2=yes
-# ;;
- v850-*-rtems*)
- cpu_type=v850
- tm_file="v850/rtems.h"
- xm_file="v850/xm-v850.h"
- tmake_file="v850/t-v850 t-rtems"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- use_collect2=no
- ;;
- v850-*-*)
- target_cpu_default="TARGET_CPU_generic"
- cpu_type=v850
- tm_file="v850/v850.h"
- xm_file="v850/xm-v850.h"
- tmake_file=v850/t-v850
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- use_collect2=no
- ;;
- vax-*-bsd*) # vaxen running BSD
- use_collect2=yes
- float_format=vax
- ;;
- vax-*-sysv*) # vaxen running system V
- tm_file="${tm_file} vax/vaxv.h"
- xm_defines=USG
- float_format=vax
- ;;
- vax-*-netbsd*)
- tm_file="${tm_file} netbsd.h vax/netbsd.h"
- tmake_file=t-netbsd
- float_format=vax
- use_collect2=yes
- ;;
- vax-*-openbsd*)
- tmake_file="${tmake_file} vax/t-openbsd"
- ;;
- vax-*-ultrix*) # vaxen running ultrix
- tm_file="${tm_file} vax/ultrix.h"
- use_collect2=yes
- float_format=vax
- ;;
- vax-*-vms*) # vaxen running VMS
- xm_file=vax/xm-vms.h
- tm_file=vax/vms.h
- float_format=vax
- ;;
- vax-*-*) # vax default entry
- float_format=vax
- ;;
- we32k-att-sysv*)
- xm_file="${xm_file} xm-svr3"
- use_collect2=yes
- ;;
- *)
- echo "Configuration $machine not supported" 1>&2
- exit 1
- ;;
- esac
+#line 3861 "configure"
+#include "confdefs.h"
- case $machine in
- *-*-linux-gnu*)
- ;; # Existing GNU/Linux systems do not use the GNU setup.
- *-*-gnu*)
- # On the GNU system, the setup is just about the same on
- # each different CPU. The specific machines that GNU
- # supports are matched above and just set $cpu_type.
- xm_file="xm-gnu.h ${xm_file}"
- tm_file=${cpu_type}/gnu.h
- extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
- # GNU always uses ELF.
- elf=yes
- # GNU tools are the only tools.
- gnu_ld=yes
- gas=yes
- xmake_file=x-linux # These details are the same as Linux.
- tmake_file=t-gnu # These are not.
- ;;
- *-*-sysv4*)
- xmake_try_sysv=x-sysv
- install_headers_dir=install-headers-cpio
- ;;
- *-*-sysv*)
- install_headers_dir=install-headers-cpio
- ;;
- esac
+#include <sys/types.h>
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+#ifdef HAVE_DIRECT_H
+# include <direct.h>
+#endif
+int main() {
+mkdir ("foo", 0);
+; return 0; }
+EOF
+if { (eval echo configure:3878: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ gcc_cv_mkdir_takes_one_arg=no
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ gcc_cv_mkdir_takes_one_arg=yes
+fi
+rm -f conftest*
+fi
- # Distinguish i[34567]86
- # Also, do not run mips-tfile on MIPS if using gas.
- # Process --with-cpu= for PowerPC/rs6000
- target_cpu_default2=
- case $machine in
- i486-*-*)
- target_cpu_default2=1
- ;;
- i586-*-*)
- case $target_alias in
- k6-*)
- target_cpu_default2=4
- ;;
- *)
- target_cpu_default2=2
- ;;
- esac
- ;;
- i686-*-* | i786-*-*)
- target_cpu_default2=3
- ;;
- alpha*-*-*)
- case $machine in
- alphaev6[78]*)
- target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX|MASK_CIX"
- ;;
- alphaev6*)
- target_cpu_default2="MASK_CPU_EV6|MASK_BWX|MASK_MAX|MASK_FIX"
- ;;
- alphapca56*)
- target_cpu_default2="MASK_CPU_EV5|MASK_BWX|MASK_MAX"
- ;;
- alphaev56*)
- target_cpu_default2="MASK_CPU_EV5|MASK_BWX"
- ;;
- alphaev5*)
- target_cpu_default2="MASK_CPU_EV5"
- ;;
- esac
-
- if test x$gas = xyes
- then
- if test "$target_cpu_default2" = ""
- then
- target_cpu_default2="MASK_GAS"
- else
- target_cpu_default2="${target_cpu_default2}|MASK_GAS"
- fi
- fi
- ;;
- arm*-*-*)
- case "x$with_cpu" in
- x)
- # The most generic
- target_cpu_default2="TARGET_CPU_generic"
- ;;
-
- # Distinguish cores, and major variants
- # arm7m doesn't exist, but D & I don't affect code
- xarm[23678] | xarm250 | xarm[67][01]0 \
- | xarm7m | xarm7dm | xarm7dmi | xarm7tdmi \
- | xarm7100 | xarm7500 | xarm7500fe | xarm810 \
- | xstrongarm | xstrongarm110 | xstrongarm1100)
- target_cpu_default2="TARGET_CPU_$with_cpu"
- ;;
-
- xyes | xno)
- echo "--with-cpu must be passed a value" 1>&2
- exit 1
- ;;
-
- *)
- if test x$pass2done = xyes
- then
- echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
- exit 1
- fi
- ;;
- esac
- ;;
+echo "$ac_t""$gcc_cv_mkdir_takes_one_arg" 1>&6
+if test $gcc_cv_mkdir_takes_one_arg = yes ; then
+ cat >> confdefs.h <<\EOF
+#define MKDIR_TAKES_ONE_ARG 1
+EOF
- mips*-*-ecoff* | mips*-*-elf*)
- if test x$gas = xyes
- then
- if test x$gnu_ld = xyes
- then
- target_cpu_default2="MASK_GAS|MASK_SPLIT_ADDR"
- else
- target_cpu_default2="MASK_GAS"
- fi
- fi
- ;;
- mips*-*-*)
- if test x$gas = xyes
- then
- target_cpu_default2="MASK_GAS"
- fi
- ;;
- powerpc*-*-* | rs6000-*-*)
- case "x$with_cpu" in
- x)
- ;;
-
- xcommon | xpower | xpower2 | xpowerpc | xrios \
- | xrios1 | xrios2 | xrsc | xrsc1 \
- | x601 | x602 | x603 | x603e | x604 | x604e | x620 \
- | xec603e | x740 | x750 | x401 \
- | x403 | x505 | x801 | x821 | x823 | x860)
- target_cpu_default2="\"$with_cpu\""
- ;;
-
- xyes | xno)
- echo "--with-cpu must be passed a value" 1>&2
- exit 1
- ;;
-
- *)
- if test x$pass2done = xyes
- then
- echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
- exit 1
- fi
- ;;
- esac
- ;;
- sparc*-*-*)
- case ".$with_cpu" in
- .)
- target_cpu_default2=TARGET_CPU_"`echo $machine | sed 's/-.*$//'`"
- ;;
- .supersparc | .hypersparc | .ultrasparc | .v7 | .v8 | .v9)
- target_cpu_default2="TARGET_CPU_$with_cpu"
- ;;
- *)
- if test x$pass2done = xyes
- then
- echo "Unknown cpu used with --with-cpu=$with_cpu" 1>&2
- exit 1
- fi
- ;;
- esac
- ;;
- esac
+fi
- if test "$target_cpu_default2" != ""
- then
- if test "$target_cpu_default" != ""
- then
- target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
- else
- target_cpu_default=$target_cpu_default2
- fi
- fi
- # No need for collect2 if we have the GNU linker.
- # Actually, there is now; GNU ld doesn't handle the EH info or
- # collecting for shared libraries.
- #case x$gnu_ld in
- #xyes)
- # use_collect2=
- # ;;
- #esac
-
-# Save data on machine being used to compile GCC in build_xm_file.
-# Save data on host machine in vars host_xm_file and host_xmake_file.
- if test x$pass1done = x
- then
- if test x"$xm_file" = x
- then build_xm_file=$cpu_type/xm-$cpu_type.h
- else build_xm_file=$xm_file
- fi
- build_xm_defines=$xm_defines
- build_install_headers_dir=$install_headers_dir
- build_exeext=$exeext
- pass1done=yes
- else
- if test x$pass2done = x
- then
- if test x"$xm_file" = x
- then host_xm_file=$cpu_type/xm-$cpu_type.h
- else host_xm_file=$xm_file
- fi
- host_xm_defines=$xm_defines
- if test x"$xmake_file" = x
- then xmake_file=$cpu_type/x-$cpu_type
- fi
- host_xmake_file="$xmake_file"
- host_truncate_target=$truncate_target
- host_extra_gcc_objs=$extra_gcc_objs
- host_extra_objs=$extra_host_objs
- host_exeext=$exeext
- pass2done=yes
- fi
- fi
+# File extensions
+manext='.1'
+objext='.o'
+
+
+
+build_xm_file=
+build_xm_defines=
+build_install_headers_dir=install-headers-tar
+build_exeext=
+host_xm_file=
+host_xm_defines=
+host_xmake_file=
+host_truncate_target=
+host_exeext=
+
+# Decode the host machine, then the target machine.
+# For the host machine, we save the xm_file variable as host_xm_file;
+# then we decode the target machine and forget everything else
+# that came from the host machine.
+for machine in $build $host $target; do
+ . ${srcdir}/config.gcc
done
extra_objs="${host_extra_objs} ${extra_objs}"
if test x"$tm_file" = x
then tm_file=$cpu_type/$cpu_type.h; fi
-if test x$extra_headers = x
+if test x"$extra_headers" = x
then extra_headers=; fi
if test x"$xm_file" = x
mkdir $tempdir
cd $tempdir
case ${srcdir} in
- /*) realsrcdir=${srcdir};;
+ /* | A-Za-z:\\/* ) realsrcdir=${srcdir};;
*) realsrcdir=../${srcdir};;
esac
CC=${CC_FOR_BUILD} ${realsrcdir}/configure \
echo "#define $def" >>$link
echo "#endif" >>$link
done
+
+ if test $link = tm.h
+ then
+ # Include insn-codes.h last, because it includes machmode.h,
+ # and we want EXTRA_CC_MODES to be taken into account.
+ echo "#ifndef GENERATOR_FILE" >>$link
+ echo "#include \"insn-codes.h\"" >>$link
+ echo "#endif" >>$link
+ fi
done
# Truncate the target if necessary
else
gcc_version_trigger=${srcdir}/version.c
fi
-gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
+gcc_version_full=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^\"]*\)\".*/\1/'`
+gcc_version=`echo ${gcc_version_full} | sed -e 's/\([^ ]*\) .*/\1/'`
+
+# Compile in configure arguments.
+if test -f configargs.h ; then
+ # Being re-configured.
+ gcc_config_arguments=`grep configuration_arguments configargs.h | sed -e 's/.*\"\([^\"]*\)\".*/\1/'`
+ gcc_config_arguments="$gcc_config_arguments : (reconfigured) $TOPLEVEL_CONFIGURE_ARGUMENTS"
+else
+ gcc_config_arguments="$TOPLEVEL_CONFIGURE_ARGUMENTS"
+fi
+cat > configargs.h <<EOF
+/* Generated automatically. */
+static const char configuration_arguments[] = "$gcc_config_arguments";
+EOF
# Internationalization
PACKAGE=gcc
-ALL_LINGUAS="en_GB"
+ALL_LINGUAS="sv"
# Enable NLS support by default
# Check whether --enable-nls or --disable-nls was given.
# if cross compiling, disable NLS support.
# It's not worth the trouble, at least for now.
-if test "${build}" != "${host}" && test "x$enable_nls" == "xyes"; then
+if test "${build}" != "${host}" && test "x$enable_nls" = "xyes"; then
echo "configure: warning: Disabling NLS support for canadian cross compiler." 1>&2
enable_nls=no
fi
+# if NLS is enabled, also enable check in po subdir
+if test $enable_nls = yes; then
+ CHECK_PO=check-po
+else
+ CHECK_PO=""
+fi
+
+
+
echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:6934: checking for strerror in -lcposix" >&5
+echo "configure:4189: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6942 "configure"
+#line 4197 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:6953: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4208: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:6976: checking for working const" >&5
+echo "configure:4231: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6981 "configure"
+#line 4236 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:7030: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4285: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:7051: checking for off_t" >&5
+echo "configure:4306: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7056 "configure"
+#line 4311 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:7084: checking for size_t" >&5
+echo "configure:4339: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7089 "configure"
+#line 4344 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:7119: checking for working alloca.h" >&5
+echo "configure:4374: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7124 "configure"
+#line 4379 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:7131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4386: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:7152: checking for alloca" >&5
+echo "configure:4407: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7157 "configure"
+#line 4412 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:7185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4440: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:7217: checking whether alloca needs Cray hooks" >&5
+echo "configure:4472: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7222 "configure"
+#line 4477 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7247: checking for $ac_func" >&5
+echo "configure:4502: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7252 "configure"
+#line 4507 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4530: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:7302: checking stack direction for C alloca" >&5
+echo "configure:4557: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 7310 "configure"
+#line 4565 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:7329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7356: checking for $ac_hdr" >&5
+echo "configure:4611: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7361 "configure"
+#line 4616 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7366: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4621: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
strdup __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7396: checking for $ac_func" >&5
+echo "configure:4651: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7401 "configure"
+#line 4656 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7424: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4679: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7453: checking for $ac_func" >&5
+echo "configure:4708: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7458 "configure"
+#line 4713 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7481: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:7515: checking for LC_MESSAGES" >&5
+echo "configure:4770: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7520 "configure"
+#line 4775 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:7527: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4782: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:7548: checking whether NLS is requested" >&5
+echo "configure:4803: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:7568: checking whether included gettext is requested" >&5
+echo "configure:4823: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
nls_cv_force_use_gnu_gettext=$withval
else
- nls_cv_force_use_gnu_gettext=yes
+ nls_cv_force_use_gnu_gettext=no
fi
echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:7587: checking for libintl.h" >&5
+echo "configure:4842: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7592 "configure"
+#line 4847 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7597: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4852: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:7614: checking for gettext in libc" >&5
+echo "configure:4869: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7619 "configure"
+#line 4874 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:7626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4881: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:7642: checking for bindtextdomain in -lintl" >&5
+echo "configure:4897: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7650 "configure"
+#line 4905 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:7661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4916: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:7677: checking for gettext in libintl" >&5
+echo "configure:4932: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:7682: checking for gettext in -lintl" >&5
+echo "configure:4937: checking for gettext in -lintl" >&5
ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7690 "configure"
+#line 4945 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gettext()
; return 0; }
EOF
-if { (eval echo configure:7701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4956: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7740: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+echo "configure:4995: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MSGFMT" in
/*)
- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ gcc_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
- ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+ gcc_cv_path_MSGFMT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
+ test -z "$gcc_cv_path_MSGFMT" && gcc_cv_path_MSGFMT="no"
;;
esac
fi
-MSGFMT="$ac_cv_path_MSGFMT"
+MSGFMT="$gcc_cv_path_MSGFMT"
if test -n "$MSGFMT"; then
echo "$ac_t""$MSGFMT" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7774: checking for $ac_func" >&5
+echo "configure:5029: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7779 "configure"
+#line 5034 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7802: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5057: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7829: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+echo "configure:5084: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
;;
?:/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ gcc_cv_path_GMSGFMT="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ test -z "$gcc_cv_path_GMSGFMT" && gcc_cv_path_GMSGFMT="$MSGFMT"
;;
esac
fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
+GMSGFMT="$gcc_cv_path_GMSGFMT"
if test -n "$GMSGFMT"; then
echo "$ac_t""$GMSGFMT" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7865: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+echo "configure:5120: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
/*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ gcc_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ gcc_cv_path_XGETTEXT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ test -z "$gcc_cv_path_XGETTEXT" && gcc_cv_path_XGETTEXT=":"
;;
esac
fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
+XGETTEXT="$gcc_cv_path_XGETTEXT"
if test -n "$XGETTEXT"; then
echo "$ac_t""$XGETTEXT" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 7897 "configure"
+#line 5152 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:7905: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
fi
rm -f conftest*
INSTOBJEXT=.mo
+ else
+ create_catalogs="no"
fi
fi
if test "$CATOBJEXT" = "NONE"; then
echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:7928: checking whether catgets can be used" >&5
+echo "configure:5185: checking whether catgets can be used" >&5
# Check whether --with-catgets or --without-catgets was given.
if test "${with_catgets+set}" = set; then
withval="$with_catgets"
if test "$nls_cv_use_catgets" = "yes"; then
echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:7941: checking for main in -li" >&5
+echo "configure:5198: checking for main in -li" >&5
ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-li $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7949 "configure"
+#line 5206 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:7956: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:7984: checking for catgets" >&5
+echo "configure:5241: checking for catgets" >&5
if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7989 "configure"
+#line 5246 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char catgets(); below. */
; return 0; }
EOF
-if { (eval echo configure:8012: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_catgets=yes"
else
# Extract the first word of "gencat", so it can be a program name with args.
set dummy gencat; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8034: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
+echo "configure:5291: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_GENCAT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GENCAT" in
/*)
- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a path.
+ gcc_cv_path_GENCAT="$GENCAT" # Let the user override the test with a path.
;;
?:/*)
- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a dos path.
+ gcc_cv_path_GENCAT="$GENCAT" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_path_GENCAT="$ac_dir/$ac_word"
+ gcc_cv_path_GENCAT="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GENCAT" && ac_cv_path_GENCAT="no"
+ test -z "$gcc_cv_path_GENCAT" && gcc_cv_path_GENCAT="no"
;;
esac
fi
-GENCAT="$ac_cv_path_GENCAT"
+GENCAT="$gcc_cv_path_GENCAT"
if test -n "$GENCAT"; then
echo "$ac_t""$GENCAT" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8070: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+echo "configure:5327: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
;;
?:/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ gcc_cv_path_GMSGFMT="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no"
+ test -z "$gcc_cv_path_GMSGFMT" && gcc_cv_path_GMSGFMT="no"
;;
esac
fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
+GMSGFMT="$gcc_cv_path_GMSGFMT"
if test -n "$GMSGFMT"; then
echo "$ac_t""$GMSGFMT" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8107: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+echo "configure:5364: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ gcc_cv_path_GMSGFMT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no"
+ test -z "$gcc_cv_path_GMSGFMT" && gcc_cv_path_GMSGFMT="msgfmt"
;;
esac
fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
+GMSGFMT="$gcc_cv_path_GMSGFMT"
if test -n "$GMSGFMT"; then
echo "$ac_t""$GMSGFMT" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ if test "$GMSGFMT" = "msgfmt"; then
+ create_catalogs="no"
+ fi
fi
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8142: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+echo "configure:5402: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
/*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ gcc_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ gcc_cv_path_XGETTEXT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ test -z "$gcc_cv_path_XGETTEXT" && gcc_cv_path_XGETTEXT=":"
;;
esac
fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
+XGETTEXT="$gcc_cv_path_XGETTEXT"
if test -n "$XGETTEXT"; then
echo "$ac_t""$XGETTEXT" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8200: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+echo "configure:5460: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$MSGFMT" in
/*)
- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ gcc_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
- ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+ gcc_cv_path_MSGFMT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
+ test -z "$gcc_cv_path_MSGFMT" && gcc_cv_path_MSGFMT="msgfmt"
;;
esac
fi
-MSGFMT="$ac_cv_path_MSGFMT"
+MSGFMT="$gcc_cv_path_MSGFMT"
if test -n "$MSGFMT"; then
echo "$ac_t""$MSGFMT" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8234: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+echo "configure:5494: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$GMSGFMT" in
/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
;;
?:/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+ gcc_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+ gcc_cv_path_GMSGFMT="$ac_dir/$ac_word"
break
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ test -z "$gcc_cv_path_GMSGFMT" && gcc_cv_path_GMSGFMT="$MSGFMT"
;;
esac
fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
+GMSGFMT="$gcc_cv_path_GMSGFMT"
if test -n "$GMSGFMT"; then
echo "$ac_t""$GMSGFMT" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ if test "$MSGFMT" = "msgfmt" && test "$GMSGFMT" = "msgfmt"; then
+ create_catalogs="no"
+ fi
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8270: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+echo "configure:5533: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'gcc_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$XGETTEXT" in
/*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ gcc_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+ gcc_cv_path_XGETTEXT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ test -z "$gcc_cv_path_XGETTEXT" && gcc_cv_path_XGETTEXT=":"
;;
esac
fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
+XGETTEXT="$gcc_cv_path_XGETTEXT"
if test -n "$XGETTEXT"; then
echo "$ac_t""$XGETTEXT" 1>&6
else
fi
fi
+
+
# We need to process the po/ directory.
POSUB=po
else
- if test "x$CATOBJEXT" != "x"; then
+ if test "x$create_catalogs" = "xno"; then
+ echo "configure: warning: No program for building catalogs found -> building disabled" 1>&2
+ fi
+
+ if test "x$CATOBJEXT" != "x" && test "x$create_catalogs" != "xno" ; then
if test "x$ALL_LINGUAS" = "x"; then
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:8363: checking for catalogs to be installed" >&5
- NEW_LINGUAS=
- for lang in $ALL_LINGUAS; do
- case " $LINGUAS " in
- *" $lang "*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
- esac
- done
- LINGUAS=$NEW_LINGUAS
+echo "configure:5632: checking for catalogs to be installed" >&5
+ if test "x$LINGUAS" = "x"; then
+ LINGUAS=$ALL_LINGUAS
+ else
+ NEW_LINGUAS=
+ for lang in $ALL_LINGUAS; do
+ case " $LINGUAS " in
+ *" $lang "*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+ esac
+ done
+ LINGUAS=$NEW_LINGUAS
+ fi
echo "$ac_t""$LINGUAS" 1>&6
fi
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:8391: checking for linux/version.h" >&5
+echo "configure:5664: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8396 "configure"
+#line 5669 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8401: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5674: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:8476: checking whether windows registry support is requested" >&5
+echo "configure:5749: checking whether windows registry support is requested" >&5
if test x$enable_win32_registry != xno; then
cat >> confdefs.h <<\EOF
#define ENABLE_WIN32_REGISTRY 1
if test x$enable_win32_registry != xno; then
echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:8505: checking registry key on windows hosts" >&5
+echo "configure:5778: checking registry key on windows hosts" >&5
cat >> confdefs.h <<EOF
#define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
EOF
maybe_use_collect2="-DUSE_COLLECT2"
fi
-# NEED TO CONVERT
-# Set MD_DEPS if the real md file is in md.pre-cpp.
-# Set MD_CPP to the cpp to pass the md file through. Md files use ';'
-# for line oriented comments, so we must always use a GNU cpp. If
-# building gcc with a cross compiler, use the cross compiler just
-# built. Otherwise, we can use the cpp just built.
-md_file_sub=
-if test "x$md_cppflags" = x
-then
- md_file_sub=$srcdir/config/$md_file
-else
- md_file=md
-fi
-
# If we have gas in the build tree, make a link to it.
if test -f ../gas/Makefile; then
rm -f as; $symbolic_link ../gas/as-new$host_exeext as$host_exeext 2>/dev/null
# fi
fi
-# Figure out what assembler alignment features are present.
-echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:8699: checking assembler alignment features" >&5
+# Figure out what assembler we will be using.
+echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
+echo "configure:5958: checking what assembler to use" >&5
gcc_cv_as=
-gcc_cv_as_alignment_features=
+gcc_cv_gas_major_version=
+gcc_cv_gas_minor_version=
gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
if test -x "$DEFAULT_ASSEMBLER"; then
gcc_cv_as="$DEFAULT_ASSEMBLER"
done
gcc_cv_gas_major_version=`expr "$gcc_cv_gas_version" : "VERSION=\([0-9]*\)"`
gcc_cv_gas_minor_version=`expr "$gcc_cv_gas_version" : "VERSION=[0-9]*\.\([0-9]*\)"`
- if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
- # Gas version 2.6 and later support for .balign and .p2align.
- # bytes to skip when using .p2align.
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 6 -o "$gcc_cv_gas_major_version" -gt 2; then
- gcc_cv_as_alignment_features=".balign and .p2align"
- cat >> confdefs.h <<\EOF
-#define HAVE_GAS_BALIGN_AND_P2ALIGN 1
-EOF
-
- fi
- # Gas version 2.8 and later support specifying the maximum
- # bytes to skip when using .p2align.
- if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 8 -o "$gcc_cv_gas_major_version" -gt 2; then
- gcc_cv_as_alignment_features=".p2align including maximum skip"
- cat >> confdefs.h <<\EOF
-#define HAVE_GAS_MAX_SKIP_P2ALIGN 1
-EOF
+fi
- fi
- fi
-elif test x$host = x$target; then
+if test "x$gcc_cv_as" = x -a x$host = x$target; then
# Native build.
# Search the same directories that the installed compiler will
# search. Else we may find the wrong assembler and lose. If we
fi
done
fi
-if test x$gcc_cv_as != x; then
+if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
+ echo "$ac_t"""newly built gas"" 1>&6
+else
+ echo "$ac_t""$gcc_cv_as" 1>&6
+fi
+
+# Figure out what nm we will be using.
+echo $ac_n "checking what nm to use""... $ac_c" 1>&6
+echo "configure:6043: checking what nm to use" >&5
+if test -x nm$host_exeext; then
+ gcc_cv_nm=./nm$host_exeext
+elif test x$host = x$target; then
+ # Native build.
+ gcc_cv_nm=nm$host_exeext
+fi
+echo "$ac_t""$gcc_cv_nm" 1>&6
+
+# Figure out what assembler alignment features are present.
+echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
+echo "configure:6054: checking assembler alignment features" >&5
+gcc_cv_as_alignment_features=none
+if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
+ # Gas version 2.6 and later support for .balign and .p2align.
+ # bytes to skip when using .p2align.
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 6 -o "$gcc_cv_gas_major_version" -gt 2; then
+ gcc_cv_as_alignment_features=".balign and .p2align"
+ cat >> confdefs.h <<\EOF
+#define HAVE_GAS_BALIGN_AND_P2ALIGN 1
+EOF
+
+ fi
+ # Gas version 2.8 and later support specifying the maximum
+ # bytes to skip when using .p2align.
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 8 -o "$gcc_cv_gas_major_version" -gt 2; then
+ gcc_cv_as_alignment_features=".p2align including maximum skip"
+ cat >> confdefs.h <<\EOF
+#define HAVE_GAS_MAX_SKIP_P2ALIGN 1
+EOF
+
+ fi
+elif test x$gcc_cv_as != x; then
# Check if we have .balign and .p2align
echo ".balign 4" > conftest.s
echo ".p2align 2" >> conftest.s
echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:8820: checking assembler subsection support" >&5
-gcc_cv_as_subsections=
-if test x$gcc_cv_as != x; then
+echo "configure:6102: checking assembler subsection support" >&5
+gcc_cv_as_subsections=no
+if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_subsections="working .subsection -1"
+ fi
+elif test x$gcc_cv_as != x; then
# Check if we have .subsection
echo ".subsection 1" > conftest.s
if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
gcc_cv_as_subsections=".subsection"
- if test -x nm$host_exeext; then
- gcc_cv_nm=./nm$host_exeext
- elif test x$host = x$target; then
- # Native build.
- gcc_cv_nm=nm$host_exeext
- fi
if test x$gcc_cv_nm != x; then
cat > conftest.s <<EOF
conftest_label1: .word 0
:
else
gcc_cv_as_subsections="working .subsection -1"
- cat >> confdefs.h <<\EOF
-#define HAVE_GAS_SUBSECTION_ORDERING 1
-EOF
-
fi
fi
fi
fi
rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
fi
+if test x"$gcc_cv_as_subsections" = x"working .subsection -1"; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_GAS_SUBSECTION_ORDERING 1
+EOF
+
+fi
echo "$ac_t""$gcc_cv_as_subsections" 1>&6
echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:8860: checking assembler weak support" >&5
-gcc_cv_as_weak=
-if test x$gcc_cv_as != x; then
+echo "configure:6142: checking assembler weak support" >&5
+gcc_cv_as_weak=no
+if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 2 -o "$gcc_cv_gas_major_version" -gt 2; then
+ gcc_cv_as_weak="yes"
+ fi
+elif test x$gcc_cv_as != x; then
# Check if we have .weak
echo " .weak foobar" > conftest.s
if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- cat >> confdefs.h <<\EOF
-#define HAVE_GAS_WEAK 1
-EOF
-
gcc_cv_as_weak="yes"
fi
rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
fi
+if test x"$gcc_cv_as_weak" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_GAS_WEAK 1
+EOF
+
+fi
echo "$ac_t""$gcc_cv_as_weak" 1>&6
echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:8877: checking assembler hidden support" >&5
-gcc_cv_as_hidden=
-if test x$gcc_cv_as != x; then
+echo "configure:6165: checking assembler hidden support" >&5
+gcc_cv_as_hidden=no
+if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 10 -o "$gcc_cv_gas_major_version" -gt 2 && grep 'obj_format = elf' ../gas/Makefile > /dev/null; then
+ gcc_cv_as_hidden="yes"
+ fi
+elif test x$gcc_cv_as != x; then
# Check if we have .hidden
echo " .hidden foobar" > conftest.s
echo "foobar:" >> conftest.s
if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
- cat >> confdefs.h <<\EOF
-#define HAVE_GAS_HIDDEN 1
-EOF
-
gcc_cv_as_hidden="yes"
fi
rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
fi
+if test x"$gcc_cv_as_hidden" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_GAS_HIDDEN 1
+EOF
+
+fi
echo "$ac_t""$gcc_cv_as_hidden" 1>&6
case "$target" in
sparc*-*-*)
echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:8897: checking assembler .register pseudo-op support" >&5
+echo "configure:6191: checking assembler .register pseudo-op support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
-echo "configure:8925: checking assembler supports -relax" >&5
+echo "configure:6219: checking assembler supports -relax" >&5
if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case "$tm_file" in
*64*)
echo $ac_n "checking for 64 bit support in assembler ($gcc_cv_as)""... $ac_c" 1>&6
-echo "configure:8955: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
+echo "configure:6249: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
if eval "test \"`echo '$''{'gcc_cv_as_flags64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "x$gcc_cv_as_flags64" != xno; then
echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:9000: checking for assembler offsetable %lo() support" >&5
+echo "configure:6294: checking for assembler offsetable %lo() support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
i[34567]86-*-*)
echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:9039: checking assembler instructions" >&5
+echo "configure:6333: checking assembler instructions" >&5
gcc_cv_as_instructions=
- if test x$gcc_cv_as != x; then
+ if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x; then
+ if test "$gcc_cv_gas_major_version" -eq 2 -a "$gcc_cv_gas_minor_version" -ge 9 -o "$gcc_cv_gas_major_version" -gt 2; then
+ gcc_cv_as_instructions="filds fists"
+ fi
+ elif test x$gcc_cv_as != x; then
set "filds fists" "filds mem; fists mem"
while test $# -gt 0
do
echo "$2" > conftest.s
if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1; then
gcc_cv_as_instructions=${gcc_cv_as_instructions}$1" "
- cat >> confdefs.h <<EOF
-#define HAVE_GAS_`echo "$1" | tr 'a-z ' 'A-Z_'` 1
-EOF
-
fi
shift 2
done
rm -f conftest.s conftest.o
fi
+ if test x"$gcc_cv_as_instructions" != x; then
+ cat >> confdefs.h <<EOF
+#define HAVE_GAS_`echo "$gcc_cv_as_instructions" | sed -e 's/ $//' | tr 'a-z ' 'A-Z_'` 1
+EOF
+
+ fi
echo "$ac_t""$gcc_cv_as_instructions" 1>&6
;;
esac
+echo $ac_n "checking assembler dwarf2 debug_line support""... $ac_c" 1>&6
+echo "configure:6362: checking assembler dwarf2 debug_line support" >&5
+gcc_cv_as_dwarf2_debug_line=no
+# ??? Not all targets support dwarf2 debug_line, even within a version
+# of gas. Moreover, we need to emit a valid instruction to trigger any
+# info to the output file. So, as supported targets are added to gas 2.11,
+# add some instruction here to (also) show we expect this might work.
+# ??? Once 2.11 is released, probably need to add first known working
+# version to the per-target configury.
+case "$target" in
+ i?86*-*-* | mips*-*-* | alpha*-*-* | powerpc*-*-* | sparc*-*-*)
+ insn="nop"
+ ;;
+ ia64*-*-*)
+ insn="nop 0"
+ ;;
+ esac
+if test x$gcc_cv_gas_major_version != x -a x$gcc_cv_gas_minor_version != x;
+then
+ if test "$gcc_cv_gas_major_version" -eq 2 \
+ -a "$gcc_cv_gas_minor_version" -ge 11 \
+ -o "$gcc_cv_gas_major_version" -gt 2 \
+ && grep 'obj_format = elf' ../gas/Makefile > /dev/null \
+ && test x"$insn" != x ; then
+ gcc_cv_as_dwarf2_debug_line="yes"
+ fi
+elif test x$gcc_cv_as != x -a x"$insn" != x ; then
+ echo ' .file 0 "conftest.s"' > conftest.s
+ echo ' .loc 0 3 0' >> conftest.s
+ echo " $insn" >> conftest.s
+ if $gcc_cv_as -o conftest.o conftest.s > /dev/null 2>&1 \
+ && grep debug_line conftest.o > /dev/null 2>&1 ; then
+ gcc_cv_as_dwarf2_debug_line="yes"
+ fi
+ rm -f conftest.s conftest.o conftest.nm1 conftest.nm2
+fi
+if test x"$gcc_cv_as_dwarf2_debug_line" = xyes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_AS_DWARF2_DEBUG_LINE 1
+EOF
+
+fi
+echo "$ac_t""$gcc_cv_as_dwarf2_debug_line" 1>&6
+
# Figure out what language subdirectories are present.
# Look if the user specified --enable-languages="..."; if not, use
# the environment variable $LANGUAGES if defined. $LANGUAGES might
${srcdir}/[*]/config-lang.in) ;;
*)
lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^ ]*\).*$,\1,p' $lang`
+ build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^ ]*\).*$,\1,p' $lang`
if test "x$lang_alias" = x
then
echo "$lang doesn't set \$language." 1>&2
exit 1
fi
- if test x"${enable_languages}" = xall; then
- add_this_lang=yes
- else
- case "${enable_languages}" in
- ${lang_alias} | "${lang_alias},"* | *",${lang_alias},"* | *",${lang_alias}" )
- add_this_lang=yes
- ;;
- * )
- add_this_lang=no
- ;;
- esac
- fi
+ case ${build_by_default},${enable_languages}, in
+ *,$lang_alias,*) add_this_lang=yes ;;
+ no,*) add_this_lang=no ;;
+ *,all,*) add_this_lang=yes ;;
+ *) add_this_lang=no ;;
+ esac
if test x"${add_this_lang}" = xyes; then
case $lang in
${srcdir}/ada/config-lang.in)
;;
esac
else
- if test $ac_cv_func_mmap_anywhere = yes \
- || test $ac_cv_func_valloc = yes; then
GGC=ggc-page
-else
- GGC=ggc-simple
-fi
fi
echo "Using $GGC for garbage collection."
+# Use the system's zlib library.
+zlibdir=-L../zlib
+zlibinc="-I\$(srcdir)/../zlib"
+# Check whether --with-system-zlib or --without-system-zlib was given.
+if test "${with_system_zlib+set}" = set; then
+ withval="$with_system_zlib"
+ zlibdir=
+zlibinc=
+
+fi
+
+
+
+
# Build a new-abi (c++) system
# Check whether --enable-new-gxx-abi or --disable-new-gxx-abi was given.
if test "${enable_new_gxx_abi+set}" = set; then
enableval="$enable_new_gxx_abi"
- cat >> confdefs.h <<\EOF
-#define ENABLE_NEW_GXX_ABI 1
-EOF
-
-GXX_ABI_FLAG='-fnew-abi'
-echo "Building a new-abi g++ compiler."
-
+ :
+else
+ enable_new_gxx_abi=yes
fi
+if test x$enable_new_gxx_abi = xyes; then
+ cat >> confdefs.h <<\EOF
+#define ENABLE_NEW_GXX_ABI 1
+EOF
-# Build a new-libstdc++ system (ie libstdc++-v3)
-echo $ac_n "checking for libstdc++ to install""... $ac_c" 1>&6
-echo "configure:9169: checking for libstdc++ to install" >&5
-# Check whether --enable-libstdcxx-v3 or --disable-libstdcxx-v3 was given.
-if test "${enable_libstdcxx_v3+set}" = set; then
- enableval="$enable_libstdcxx_v3"
- enable_libstdcxx_v3=yes
+ GXX_ABI_FLAG='-fnew-abi'
else
- enable_libstdcxx_v3=no
+ GXX_ABI_FLAG=
fi
-if test x$enable_libstdcxx_v3 = xyes; then
- echo "$ac_t""v3" 1>&6
- ac_esn=1
-else
- echo "$ac_t""v2" 1>&6
- ac_esn=0
-fi
cat >> confdefs.h <<EOF
#define ENABLE_STD_NAMESPACE $ac_esn
EOF
+
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:9193: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:6530: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
language_fragments="Make-lang"
language_hooks="Make-hooks"
-oldstyle_subdirs=
for s in .. $subdirs
do
echo "${srcdir}/$s/config-lang.in doesn't set \$language." 1>&2
exit 1
fi
- all_lang_makefiles="$all_lang_makefiles ${srcdir}/$s/Make-lang.in ${srcdir}/$s/Makefile.in"
+ all_lang_makefiles="$all_lang_makefiles ${srcdir}/$s/Make-lang.in"
+ if test -f ${srcdir}/$s/Makefile.in
+ then all_lang_makefiles="$all_lang_makefiles ${srcdir}/$s/Makefile.in"
+ fi
all_languages="$all_languages $language"
if test "x$boot_language" = xyes
then
all_diff_excludes="$all_diff_excludes $diff_excludes"
all_headers="$all_headers $headers"
all_outputs="$all_outputs $outputs"
- if test x$outputs = x
- then
- oldstyle_subdirs="$oldstyle_subdirs $s"
- fi
all_lib2funcs="$all_lib2funcs $lib2funcs"
fi
done
target_list="all.build all.cross start.encap rest.encap \
info dvi \
install-normal install-common install-info install-man \
- uninstall distdir \
+ uninstall \
mostlyclean clean distclean extraclean maintainer-clean \
stage1 stage2 stage3 stage4"
for t in $target_list
+# Find a directory in which to install a shared libgcc.
+
+# Check whether --enable-version-specific-runtime-libs or --disable-version-specific-runtime-libs was given.
+if test "${enable_version_specific_runtime_libs+set}" = set; then
+ enableval="$enable_version_specific_runtime_libs"
+ :
+fi
+
+
+# Check whether --with-slibdir or --without-slibdir was given.
+if test "${with_slibdir+set}" = set; then
+ withval="$with_slibdir"
+ slibdir="$with_slibdir"
+else
+ if test "${enable_version_specific_runtime_libs+set}" = set; then
+ slibdir='$(libsubdir)'
+elif test "$host" != "$target"; then
+ slibdir='$(build_tooldir)/lib'
+else
+ slibdir='$(libdir)'
+fi
+fi
+
+
+
# Nothing to do for FLOAT_H, float_format already handled.
objdir=`pwd`
+
+
# Echo that links are built
if test x$host = x$target
then
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@enable_shared@%$enable_shared%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@build_os@%$build_os%g
s%@CC@%$CC%g
s%@NO_MINUS_C_MINUS_O@%$NO_MINUS_C_MINUS_O%g
-s%@stage1_warn_cflags@%$stage1_warn_cflags%g
-s%@stage2_warn_cflags@%$stage2_warn_cflags%g
+s%@OUTPUT_OPTION@%$OUTPUT_OPTION%g
+s%@strict1_warn@%$strict1_warn%g
+s%@warn_cflags@%$warn_cflags%g
+s%@stage1_cflags@%$stage1_cflags%g
s%@SET_MAKE@%$SET_MAKE%g
s%@AWK@%$AWK%g
-s%@LEX@%$LEX%g
-s%@LEXLIB@%$LEXLIB%g
s%@LN@%$LN%g
s%@LN_S@%$LN_S%g
s%@RANLIB@%$RANLIB%g
-s%@YACC@%$YACC%g
s%@INSTALL@%$INSTALL%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@CPP@%$CPP%g
s%@gnat@%$gnat%g
+s%@have_mktemp_command@%$have_mktemp_command%g
s%@MAKEINFO@%$MAKEINFO%g
s%@BUILD_INFO@%$BUILD_INFO%g
-s%@INSTALL_INFO@%$INSTALL_INFO%g
+s%@GENERATED_MANPAGES@%$GENERATED_MANPAGES%g
+s%@FLEX@%$FLEX%g
+s%@BISON@%$BISON%g
+s%@TARGET_GETGROUPS_T@%$TARGET_GETGROUPS_T%g
s%@vfprintf@%$vfprintf%g
s%@doprint@%$doprint%g
s%@manext@%$manext%g
s%@objext@%$objext%g
s%@PACKAGE@%$PACKAGE%g
s%@VERSION@%$VERSION%g
+s%@CHECK_PO@%$CHECK_PO%g
s%@ALLOCA@%$ALLOCA%g
s%@USE_NLS@%$USE_NLS%g
s%@MSGFMT@%$MSGFMT%g
s%@inhibit_libc@%$inhibit_libc%g
s%@gthread_flags@%$gthread_flags%g
s%@GGC@%$GGC%g
+s%@zlibdir@%$zlibdir%g
+s%@zlibinc@%$zlibinc%g
s%@GXX_ABI_FLAG@%$GXX_ABI_FLAG%g
+s%@HAVE_LIBSTDCXX_V3@%$HAVE_LIBSTDCXX_V3%g
s%@MAINT@%$MAINT%g
s%@build_canonical@%$build_canonical%g
s%@host_canonical@%$host_canonical%g
s%@target_subdir@%$target_subdir%g
s%@gcc_tooldir@%$gcc_tooldir%g
s%@dollar@%$dollar%g
+s%@slibdir@%$slibdir%g
s%@objdir@%$objdir%g
s%@subdirs@%$subdirs%g
s%@all_boot_languages@%$all_boot_languages%g
s%@dep_host_xmake_file@%$dep_host_xmake_file%g
s%@dep_tmake_file@%$dep_tmake_file%g
s%@extra_c_flags@%$extra_c_flags%g
-s%@extra_c_objs@%$extra_c_objs%g
-s%@extra_cpp_objs@%$extra_cpp_objs%g
-s%@extra_cxx_objs@%$extra_cxx_objs%g
s%@extra_headers_list@%$extra_headers_list%g
s%@extra_objs@%$extra_objs%g
s%@extra_parts@%$extra_parts%g
s%@extra_passes@%$extra_passes%g
s%@extra_programs@%$extra_programs%g
s%@float_h_file@%$float_h_file%g
+s%@gcc_config_arguments@%$gcc_config_arguments%g
s%@gcc_gxx_include_dir@%$gcc_gxx_include_dir%g
+s%@libstdcxx_incdir@%$libstdcxx_incdir%g
s%@gcc_version@%$gcc_version%g
+s%@gcc_version_full@%$gcc_version_full%g
s%@gcc_version_trigger@%$gcc_version_trigger%g
s%@host_exeext@%$host_exeext%g
s%@host_extra_gcc_objs@%$host_extra_gcc_objs%g
s%@thread_file@%$thread_file%g
s%@tm_file_list@%$tm_file_list%g
s%@will_use_collect2@%$will_use_collect2%g
+s%@c_target_objs@%$c_target_objs%g
+s%@cxx_target_objs@%$cxx_target_objs%g
/@target_overrides@/r $target_overrides
s%@target_overrides@%%g
/@host_overrides@/r $host_overrides
target_alias='${target_alias}'
srcdir='${srcdir}'
subdirs='${subdirs}'
-oldstyle_subdirs='${oldstyle_subdirs}'
symbolic_link='${symbolic_link}'
program_transform_set='${program_transform_set}'
program_transform_name='${program_transform_name}'
dep_tmake_file='${dep_tmake_file}'
tmake_file='${tmake_file}'
thread_file='${thread_file}'
+gcc_config_arguments='${gcc_config_arguments}'
gcc_version='${gcc_version}'
+gcc_version_full='${gcc_version_full}'
gcc_version_trigger='${gcc_version_trigger}'
local_prefix='${local_prefix}'
build_install_headers_dir='${build_install_headers_dir}'
sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
esac
-. $srcdir/configure.lang
case x$CONFIG_HEADERS in
xauto-host.h:config.in)
echo > cstamp-h ;;