if test x$host != x$target; then
libstdcxx_incdir="$target_alias/$libstdcxx_incdir"
fi
-changequote(<<, >>)dnl
- gcc_gxx_include_dir="\$(libsubdir)/\$(unlibsubdir)/..\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/[^/]*|/..|g'\`/$libstdcxx_incdir"
-changequote([, ])dnl
+ gcc_gxx_include_dir="\$(libsubdir)/\$(libsubdir_to_prefix)$libstdcxx_incdir"
fi
fi
[Define to enable the use of a default linker.])
fi
+gnu_ld=`if test x"$gnu_ld_flag" = x"yes"; then echo 1; else echo 0; fi`
+AC_DEFINE_UNQUOTED(HAVE_GNU_LD, $gnu_ld, [Define if using GNU ld.])
+
AC_MSG_CHECKING([whether a default linker was specified])
if test x"${DEFAULT_LINKER+set}" = x"set"; then
if test x"$gnu_ld_flag" = x"no"; then
# Enable C extension for decimal float if target supports it.
AC_ARG_ENABLE(decimal-float,
-[ --enable-decimal-float enable decimal float extension to C],
+[ --enable-decimal-float={no,yes,bid,dpd}
+ enable decimal float extension to C. Selecting 'bid'
+ or 'dpd' choses which decimal floating point format
+ to use],
[
- if test x$enablevar = xyes ; then
- case $target in
- powerpc*-*-linux* | i?86*-*-linux*)
+ case $enable_decimal_float in
+ yes | no | bid | dpd) ;;
+ *) AC_MSG_ERROR(['$enable_decimal_float' is an invalid value for --enable-decimal-float.
+Valid choices are 'yes', 'bid', 'dpd', and 'no'.]) ;;
+ esac
+],
+[
+ case $target in
+ powerpc*-*-linux* | i?86*-*-linux* | x86_64*-*-linux*)
enable_decimal_float=yes
;;
*)
AC_MSG_WARN(decimal float is not supported for this target, ignored)
enable_decimal_float=no
;;
- esac
- fi
-], [enable_decimal_float=no])
-
-AC_SUBST(enable_decimal_float)
+ esac
+])
-dfp=`if test $enable_decimal_float = yes; then echo 1; else echo 0; fi`
+dfp=`if test $enable_decimal_float != no; then echo 1; else echo 0; fi`
AC_DEFINE_UNQUOTED(ENABLE_DECIMAL_FLOAT, $dfp,
[Define to 1 to enable decimal float extension to C.])
+# x86's use BID format instead of DPD
+case x$enable_decimal_float in
+ xyes)
+ case $target in
+ i?86*-*-linux* | x86_64*-*-linux*)
+ enable_decimal_float=bid
+ ;;
+ *)
+ enable_decimal_float=dpd
+ ;;
+ esac
+ ;;
+ xno)
+ # ENABLE_DECIMAL_FLOAT is set to 0. But we have to have proper
+ # dependency on libdecnumber.
+ enable_decimal_float=dpd
+ ;;
+esac
+AC_SUBST(enable_decimal_float)
+
+bid=`if test $enable_decimal_float = bid; then echo 1; else echo 0; fi`
+AC_DEFINE_UNQUOTED(ENABLE_DECIMAL_BID_FORMAT, $bid,
+[Define to 1 to specify that we are using the BID decimal floating
+point format instead of DPD])
+
# Enable threads
# Pass with no value to take the default
# Pass with a value to specify a thread package
ORIGINAL_AS_FOR_TARGET=$gcc_cv_as
AC_SUBST(ORIGINAL_AS_FOR_TARGET)
+case "$ORIGINAL_AS_FOR_TARGET" in
+ ./as | ./as$build_exeext) ;;
+ *) AC_CONFIG_FILES(as:exec-tool.in, [chmod +x as]) ;;
+esac
AC_MSG_CHECKING(what assembler to use)
if test "$gcc_cv_as" = ../gas/as-new$build_exeext; then
ORIGINAL_LD_FOR_TARGET=$gcc_cv_ld
AC_SUBST(ORIGINAL_LD_FOR_TARGET)
+case "$ORIGINAL_LD_FOR_TARGET" in
+ ./collect-ld | ./collect-ld$build_exeext) ;;
+ *) AC_CONFIG_FILES(collect-ld:exec-tool.in, [chmod +x collect-ld]) ;;
+esac
AC_MSG_CHECKING(what linker to use)
if test "$gcc_cv_ld" = ../ld/ld-new$build_exeext; then
ORIGINAL_NM_FOR_TARGET=$gcc_cv_nm
AC_SUBST(ORIGINAL_NM_FOR_TARGET)
+case "$ORIGINAL_NM_FOR_TARGET" in
+ ./nm | ./nm$build_exeext) ;;
+ *) AC_CONFIG_FILES(nm:exec-tool.in, [chmod +x nm]) ;;
+esac
+
# Figure out what objdump we will be using.
AS_VAR_SET_IF(gcc_cv_objdump,, [
case $target in
*-*-aix*) conftest_s=' .machine "pwr6"
.csect .text[[PR]]
- dadd 1,3';;
+ dadd 1,2,3';;
*) conftest_s=' .machine power6
.text
- dadd 1,3';;
+ dadd 1,2,3';;
esac
gcc_GAS_CHECK_FEATURE([decimal float support],
# Some glibc targets used DFmode long double, but with glibc 2.4
# and later they can use TFmode.
case "$target" in
- powerpc*-*-*gnu* | \
+ powerpc*-*-linux* | \
+ powerpc*-*-gnu* | \
sparc*-*-linux* | \
s390*-*-linux* | \
alpha*-*-linux*)
all_lang_makefrags=
# List of language subdirectory makefiles. Deprecated.
all_lang_makefiles=
-# Files for gengtype
+# Additional files for gengtype
all_gtfiles="$target_gtfiles"
-# Files for gengtype with language
-all_gtfiles_files_langs=
-all_gtfiles_files_files=
# These are the languages that are set in --enable-languages,
# and are available in the GCC tree.
all_languages="$all_languages $language"
all_compilers="$all_compilers $compilers"
all_outputs="$all_outputs $outputs"
- all_gtfiles="$all_gtfiles $gtfiles"
- for f in $gtfiles
- do
- all_gtfiles_files_langs="$all_gtfiles_files_langs ${subdir} "
- all_gtfiles_files_files="$all_gtfiles_files_files ${f} "
- done
+ all_gtfiles="$all_gtfiles [[$subdir]] $gtfiles"
done
# Pick up gtfiles for c
gtfiles=
-subdir="c"
. ${srcdir}/c-config-lang.in
-all_gtfiles="$all_gtfiles $gtfiles"
-for f in $gtfiles
-do
- all_gtfiles_files_langs="$all_gtfiles_files_langs ${subdir} "
- all_gtfiles_files_files="$all_gtfiles_files_files ${f} "
-done
+all_gtfiles="$all_gtfiles [[c]] $gtfiles"
check_languages=
for language in $all_selected_languages
fi
echo "source ${srcdir}/gdbinit.in" >> .gdbinit
-# If $(exec_prefix) exists and is not the same as $(prefix), then compute an
-# absolute path for gcc_tooldir based on inserting the number of up-directory
-# movements required to get from $(exec_prefix) to $(prefix) into the basic
-# $(libsubdir)/@(unlibsubdir) based path.
-# Don't set gcc_tooldir to tooldir since that's only passed in by the toplevel
-# make and thus we'd get different behavior depending on where we built the
-# sources.
-if test x$exec_prefix = xNONE -o x$exec_prefix = x$prefix; then
- gcc_tooldir='$(libsubdir)/$(unlibsubdir)/../$(target_noncanonical)'
-else
-changequote(<<, >>)dnl
-# An explanation of the sed strings:
-# -e 's|^\$(prefix)||' matches and eliminates 'prefix' from 'exec_prefix'
-# -e 's|/$||' match a trailing forward slash and eliminates it
-# -e 's|^[^/]|/|' forces the string to start with a forward slash (*)
-# -e 's|/[^/]*|../|g' replaces each occurrence of /<directory> with ../
-#
-# (*) Note this pattern overwrites the first character of the string
-# with a forward slash if one is not already present. This is not a
-# problem because the exact names of the sub-directories concerned is
-# unimportant, just the number of them matters.
-#
-# The practical upshot of these patterns is like this:
-#
-# prefix exec_prefix result
-# ------ ----------- ------
-# /foo /foo/bar ../
-# /foo/ /foo/bar ../
-# /foo /foo/bar/ ../
-# /foo/ /foo/bar/ ../
-# /foo /foo/bar/ugg ../../
-#
- dollar='$$'
- gcc_tooldir="\$(libsubdir)/\$(unlibsubdir)/\`echo \$(exec_prefix) | sed -e 's|^\$(prefix)||' -e 's|/\$(dollar)||' -e 's|^[^/]|/|' -e 's|/[^/]*|../|g'\`\$(target_noncanonical)"
-changequote([, ])dnl
-fi
+gcc_tooldir='$(libsubdir)/$(libsubdir_to_prefix)$(target_noncanonical)'
AC_SUBST(gcc_tooldir)
AC_SUBST(dollar)
AC_SUBST(srcdir)
AC_SUBST(all_compilers)
AC_SUBST(all_gtfiles)
-AC_SUBST(all_gtfiles_files_langs)
-AC_SUBST(all_gtfiles_files_files)
AC_SUBST(all_lang_makefrags)
AC_SUBST(all_lang_makefiles)
AC_SUBST(all_languages)
OSDN Git Service
