(match_operand:SI 1 "arith_reg_or_0_operand" "rN")))]
"TARGET_SH1"
"cmp/hs %1,%0"
- "&& operands[0] == CONST0_RTX (SImode)"
+ "&& operands[1] == CONST0_RTX (SImode)"
[(pc)]
"
{
andi %1, %2, %0"
[(set_attr "type" "arith_media")])
+(define_insn "*andsi3_bclr"
+ [(set (match_operand:SI 0 "arith_reg_dest" "=r")
+ (and:SI (match_operand:SI 1 "arith_reg_operand" "%0")
+ (match_operand:SI 2 "const_int_operand" "Psz")))]
+ "TARGET_SH2A && satisfies_constraint_Psz (operands[2])"
+ "bclr\\t%W2,%0"
+ [(set_attr "type" "arith")])
+
;; If the constant is 255, then emit an extu.b instruction instead of an
;; and, since that will give better code.
[(set (match_operand:SI 0 "arith_reg_dest" "=r,z")
(ior:SI (match_operand:SI 1 "arith_reg_operand" "%0,0")
(match_operand:SI 2 "logical_operand" "r,K08")))]
- "TARGET_SH1"
+ "TARGET_SH1
+ && !(TARGET_SH2A && satisfies_constraint_Pso (operands[2]))"
"or %2,%0"
[(set_attr "type" "arith")])
ori %1, %2, %0"
[(set_attr "type" "arith_media")])
+(define_insn "*iorsi3_bset"
+ [(set (match_operand:SI 0 "arith_reg_dest" "=r")
+ (ior:SI (match_operand:SI 1 "arith_reg_operand" "%0")
+ (match_operand:SI 2 "const_int_operand" "Pso")))]
+ "TARGET_SH2A && satisfies_constraint_Pso (operands[2])"
+ "bset\\t%V2,%0"
+ [(set_attr "type" "arith")])
+
(define_insn "iordi3"
[(set (match_operand:DI 0 "arith_reg_dest" "=r,r")
(ior:DI (match_operand:DI 1 "arith_reg_operand" "%r,r")
xori %1, %2, %0"
[(set_attr "type" "arith_media")])
+;; Store the complements of the T bit in a register.
+(define_insn "xorsi3_movrt"
+ [(set (match_operand:SI 0 "arith_reg_dest" "=r")
+ (xor:SI (reg:SI T_REG)
+ (const_int 1)))]
+ "TARGET_SH2A"
+ "movrt\\t%0"
+ [(set_attr "type" "arith")])
+
(define_insn "xordi3"
[(set (match_operand:DI 0 "arith_reg_dest" "=r,r")
(xor:DI (match_operand:DI 1 "arith_reg_operand" "%r,r")
"@
exts.b %1,%0
mov.b %1,%0"
- [(set_attr "type" "arith,load")])
+ [(set_attr "type" "arith,load")
+ (set_attr_alternative "length"
+ [(const_int 2)
+ (if_then_else
+ (ne (symbol_ref "TARGET_SH2A") (const_int 0))
+ (const_int 4) (const_int 2))])])
(define_insn "*extendqisi2_media"
[(set (match_operand:SI 0 "register_operand" "=r,r")
"@
exts.b %1,%0
mov.b %1,%0"
- [(set_attr "type" "arith,load")])
+ [(set_attr "type" "arith,load")
+ (set_attr_alternative "length"
+ [(const_int 2)
+ (if_then_else
+ (ne (symbol_ref "TARGET_SH2A") (const_int 0))
+ (const_int 4) (const_int 2))])])
/* It would seem useful to combine the truncXi patterns into the movXi
patterns, but unary operators are ignored when matching constraints,
;; TARGET_FMOVD is in effect, and mode switching is done before reload.
(define_insn "movsi_ie"
[(set (match_operand:SI 0 "general_movdst_operand"
- "=r,r,r,r,t,r,r,r,r,m,<,<,x,l,x,l,y,<,r,y,r,*f,y,*f,y")
+ "=r,r,r,r,r,t,r,r,r,r,m,<,<,x,l,x,l,y,<,r,y,r,*f,y,*f,y")
(match_operand:SI 1 "general_movsrc_operand"
- "Q,r,I08,I20,r,mr,x,l,t,r,x,l,r,r,>,>,>,y,i,r,y,y,*f,*f,y"))]
+ "Q,r,I08,I20,I28,r,mr,x,l,t,r,x,l,r,r,>,>,>,y,i,r,y,y,*f,*f,y"))]
"(TARGET_SH2E || TARGET_SH2A)
&& (register_operand (operands[0], SImode)
|| register_operand (operands[1], SImode))"
mov %1,%0
mov %1,%0
movi20 %1,%0
+ movi20s %1,%0
cmp/pl %1
mov.l %1,%0
sts %1,%0
flds %1,fpul
fmov %1,%0
! move optimized away"
- [(set_attr "type" "pcload_si,move,movi8,move,*,load_si,mac_gp,prget,arith,store,mac_mem,pstore,gp_mac,prset,mem_mac,pload,load,fstore,pcload_si,gp_fpul,fpul_gp,fmove,fmove,fmove,nil")
- (set_attr "late_fp_use" "*,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*,yes,*,*,yes,*,*,*,*")
+ [(set_attr "type" "pcload_si,move,movi8,move,move,*,load_si,mac_gp,prget,arith,store,mac_mem,pstore,gp_mac,prset,mem_mac,pload,load,fstore,pcload_si,gp_fpul,fpul_gp,fmove,fmove,fmove,nil")
+ (set_attr "late_fp_use" "*,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*,yes,*,*,yes,*,*,*,*")
(set_attr_alternative "length"
[(const_int 2)
(const_int 2)
(const_int 2)
(const_int 4)
+ (const_int 4)
(const_int 2)
(if_then_else
(ne (symbol_ref "TARGET_SH2A") (const_int 0))
movt %0
sts %1,%0
lds %1,%0"
- [(set_attr "type" "move,movi8,load,store,arith,prget,prset")])
+ [(set_attr "type" "move,movi8,load,store,arith,prget,prset")
+ (set_attr_alternative "length"
+ [(const_int 2)
+ (const_int 2)
+ (if_then_else
+ (ne (symbol_ref "TARGET_SH2A") (const_int 0))
+ (const_int 4) (const_int 2))
+ (if_then_else
+ (ne (symbol_ref "TARGET_SH2A") (const_int 0))
+ (const_int 4) (const_int 2))
+ (const_int 2)
+ (const_int 2)
+ (const_int 2)])])
(define_insn "*movqi_media"
[(set (match_operand:QI 0 "general_movdst_operand" "=r,r,r,m")
(define_insn "jump_compact"
[(set (pc)
(label_ref (match_operand 0 "" "")))]
- "TARGET_SH1"
+ "TARGET_SH1 && !find_reg_note (insn, REG_CROSSING_JUMP, NULL_RTX)"
"*
{
/* The length is 16 if the delay slot is unfilled. */
(use (reg:PSI FPSCR_REG))
(clobber (reg:SI PR_REG))]
"TARGET_SH1"
- "jsr @%0%#"
+ "*
+ {
+ if (TARGET_SH2A && (dbr_sequence_length () == 0))
+ return \"jsr/n\\t@%0\";
+ else
+ return \"jsr\\t@%0%#\";
+ }"
+
[(set_attr "type" "call")
(set (attr "fp_mode")
(if_then_else (eq_attr "fpu_single" "yes")
(set_attr "needs_delay_slot" "yes")
(set_attr "fp_set" "unknown")])
+;; This is TBR relative jump instruction for SH2A architecture.
+;; Its use is enabled assigning an attribute "function_vector"
+;; and the vector number to a function during its declaration.
+
+(define_insn "calli_tbr_rel"
+ [(call (mem (match_operand:SI 0 "symbol_ref_operand" ""))
+ (match_operand 1 "" ""))
+ (use (reg:PSI FPSCR_REG))
+ (clobber (reg:SI PR_REG))]
+ "TARGET_SH2A && sh2a_is_function_vector_call (operands[0])"
+ "*
+{
+ unsigned HOST_WIDE_INT vect_num;
+ vect_num = sh2a_get_function_vector_number (operands[0]);
+ operands[2] = GEN_INT (vect_num * 4);
+
+ return \"jsr/n\\t@@(%O2,tbr)\";
+}"
+ [(set_attr "type" "call")
+ (set (attr "fp_mode")
+ (if_then_else (eq_attr "fpu_single" "yes")
+ (const_string "single") (const_string "double")))
+ (set_attr "needs_delay_slot" "no")
+ (set_attr "fp_set" "unknown")])
+
;; This is a pc-rel call, using bsrf, for use with PIC.
(define_insn "calli_pcrel"
(use (reg:PSI FPSCR_REG))
(clobber (reg:SI PR_REG))]
"TARGET_SH1"
- "jsr @%1%#"
+ "*
+ {
+ if (TARGET_SH2A && (dbr_sequence_length () == 0))
+ return \"jsr/n\\t@%1\";
+ else
+ return \"jsr\\t@%1%#\";
+ }"
[(set_attr "type" "call")
(set (attr "fp_mode")
(if_then_else (eq_attr "fpu_single" "yes")
(set_attr "needs_delay_slot" "yes")
(set_attr "fp_set" "unknown")])
+;; This is TBR relative jump instruction for SH2A architecture.
+;; Its use is enabled assigning an attribute "function_vector"
+;; and the vector number to a function during its declaration.
+
+(define_insn "call_valuei_tbr_rel"
+ [(set (match_operand 0 "" "=rf")
+ (call (mem:SI (match_operand:SI 1 "symbol_ref_operand" ""))
+ (match_operand 2 "" "")))
+ (use (reg:PSI FPSCR_REG))
+ (clobber (reg:SI PR_REG))]
+ "TARGET_SH2A && sh2a_is_function_vector_call (operands[1])"
+ "*
+{
+ unsigned HOST_WIDE_INT vect_num;
+ vect_num = sh2a_get_function_vector_number (operands[1]);
+ operands[3] = GEN_INT (vect_num * 4);
+
+ return \"jsr/n\\t@@(%O3,tbr)\";
+}"
+ [(set_attr "type" "call")
+ (set (attr "fp_mode")
+ (if_then_else (eq_attr "fpu_single" "yes")
+ (const_string "single") (const_string "double")))
+ (set_attr "needs_delay_slot" "no")
+ (set_attr "fp_set" "unknown")])
+
(define_insn "call_valuei_pcrel"
[(set (match_operand 0 "" "=rf")
(call (mem:SI (match_operand:SI 1 "arith_reg_operand" "r"))
emit_insn (gen_symGOTPLT2reg (reg, XEXP (operands[0], 0)));
XEXP (operands[0], 0) = reg;
}
+ if (!flag_pic && TARGET_SH2A
+ && GET_CODE (operands[0]) == MEM
+ && GET_CODE (XEXP (operands[0], 0)) == SYMBOL_REF)
+ {
+ if (sh2a_is_function_vector_call (XEXP (operands[0], 0)))
+ {
+ emit_call_insn (gen_calli_tbr_rel (XEXP (operands[0], 0),
+ operands[1]));
+ DONE;
+ }
+ }
if (flag_pic && TARGET_SH2
&& GET_CODE (operands[0]) == MEM
&& GET_CODE (XEXP (operands[0], 0)) == SYMBOL_REF)
emit_insn (gen_symGOTPLT2reg (reg, XEXP (operands[1], 0)));
XEXP (operands[1], 0) = reg;
}
+ if (!flag_pic && TARGET_SH2A
+ && GET_CODE (operands[1]) == MEM
+ && GET_CODE (XEXP (operands[1], 0)) == SYMBOL_REF)
+ {
+ if (sh2a_is_function_vector_call (XEXP (operands[1], 0)))
+ {
+ emit_call_insn (gen_call_valuei_tbr_rel (operands[0],
+ XEXP (operands[1], 0), operands[2]));
+ DONE;
+ }
+ }
if (flag_pic && TARGET_SH2
&& GET_CODE (operands[1]) == MEM
&& GET_CODE (XEXP (operands[1], 0)) == SYMBOL_REF)
&& reload_completed
&& lookup_attribute (\"trap_exit\",
DECL_ATTRIBUTES (current_function_decl)) == NULL_TREE"
- "%@ %#"
+ "*
+ {
+ if (TARGET_SH2A && (dbr_sequence_length () == 0)
+ && !current_function_interrupt)
+ return \"rts/n\";
+ else
+ return \"%@ %#\";
+ }"
[(set_attr "type" "return")
(set_attr "needs_delay_slot" "yes")])
"movt %0"
[(set_attr "type" "arith")])
+;; complements the T bit and stores the result in a register
+(define_insn "movrt"
+ [(set (match_operand:SI 0 "arith_reg_dest" "=r")
+ (if_then_else (eq:SI (reg:SI T_REG) (const_int 0))
+ (const_int 1)
+ (const_int 0)))]
+ "TARGET_SH2A"
+ "movrt\\t%0"
+ [(set_attr "type" "arith")])
+
(define_expand "seq"
[(set (match_operand:SI 0 "arith_reg_dest" "")
(match_dup 1))]
HOST_WIDE_INT bitsize, size, v = 0;
rtx x = operands[3];
+ if (TARGET_SH2A && TARGET_BITOPS
+ && (satisfies_constraint_Sbw (operands[0])
+ || satisfies_constraint_Sbv (operands[0]))
+ && satisfies_constraint_M (operands[1])
+ && satisfies_constraint_K03 (operands[2]))
+ {
+ if (satisfies_constraint_N (operands[3]))
+ {
+ emit_insn (gen_bclr_m2a (operands[0], operands[2]));
+ DONE;
+ }
+ else if (satisfies_constraint_M (operands[3]))
+ {
+ emit_insn (gen_bset_m2a (operands[0], operands[2]));
+ DONE;
+ }
+ else if ((REG_P (operands[3]) && REGNO (operands[3]) == T_REG)
+ && satisfies_constraint_M (operands[1]))
+ {
+ emit_insn (gen_bst_m2a (operands[0], operands[2]));
+ DONE;
+ }
+ else if (REG_P (operands[3])
+ && satisfies_constraint_M (operands[1]))
+ {
+ emit_insn (gen_bld_reg (operands[3], const0_rtx));
+ emit_insn (gen_bst_m2a (operands[0], operands[2]));
+ DONE;
+ }
+ }
/* ??? expmed doesn't care for non-register predicates. */
if (! memory_operand (operands[0], VOIDmode)
|| ! immediate_operand (operands[1], VOIDmode)
(sign_extract:SI (match_operand:QI 1 "unaligned_load_operand" "")
(match_operand 2 "const_int_operand" "")
(match_operand 3 "const_int_operand" "")))]
- "TARGET_SH4A_ARCH"
-{
+ "TARGET_SH4A_ARCH || TARGET_SH2A"
+{
+ if (TARGET_SH2A && TARGET_BITOPS
+ && (satisfies_constraint_Sbw (operands[1])
+ || satisfies_constraint_Sbv (operands[1]))
+ && satisfies_constraint_M (operands[2])
+ && satisfies_constraint_K03 (operands[3]))
+ {
+ emit_insn (gen_bldsign_m2a (operands[1], operands[3]));
+ if (REGNO (operands[0]) != T_REG)
+ emit_insn (gen_movsi (operands[0], gen_rtx_REG (SImode, T_REG)));
+ DONE;
+ }
if (TARGET_SH4A_ARCH
&& INTVAL (operands[2]) == 32
&& INTVAL (operands[3]) == -24 * (BITS_BIG_ENDIAN != BYTES_BIG_ENDIAN)
(zero_extract:SI (match_operand:QI 1 "unaligned_load_operand" "")
(match_operand 2 "const_int_operand" "")
(match_operand 3 "const_int_operand" "")))]
- "TARGET_SH4A_ARCH"
+ "TARGET_SH4A_ARCH || TARGET_SH2A"
{
+ if (TARGET_SH2A && TARGET_BITOPS
+ && (satisfies_constraint_Sbw (operands[1])
+ || satisfies_constraint_Sbv (operands[1]))
+ && satisfies_constraint_M (operands[2])
+ && satisfies_constraint_K03 (operands[3]))
+ {
+ emit_insn (gen_bld_m2a (operands[1], operands[3]));
+ if (REGNO (operands[0]) != T_REG)
+ emit_insn (gen_movsi (operands[0], gen_rtx_REG (SImode, T_REG)));
+ DONE;
+ }
if (TARGET_SH4A_ARCH
&& INTVAL (operands[2]) == 32
&& INTVAL (operands[3]) == -24 * (BITS_BIG_ENDIAN != BYTES_BIG_ENDIAN)
FAIL;
})
+;; SH2A instructions for bitwise operations.
+
+;; Clear a bit in a memory location.
+(define_insn "bclr_m2a"
+ [(set (match_operand:QI 0 "bitwise_memory_operand" "+Sbw,Sbv")
+ (and:QI
+ (not:QI (ashift:QI (const_int 1)
+ (match_operand:QI 1 "const_int_operand" "K03,K03")))
+ (match_dup 0)))]
+ "TARGET_SH2A && TARGET_BITOPS"
+ "@
+ bclr.b\\t%1,%0
+ bclr.b\\t%1,@(0,%t0)"
+[(set_attr "length" "4,4")])
+
+(define_insn "bclrmem_m2a"
+ [(set (match_operand:QI 0 "bitwise_memory_operand" "+Sbw,Sbv")
+ (and:QI (match_dup 0)
+ (match_operand:QI 1 "const_int_operand" "Psz,Psz")))]
+ "TARGET_SH2A && satisfies_constraint_Psz (operands[1]) && TARGET_BITOPS"
+ "@
+ bclr.b\\t%W1,%0
+ bclr.b\\t%W1,@(0,%t0)"
+ [(set_attr "length" "4,4")])
+
+;; Set a bit in a memory location.
+(define_insn "bset_m2a"
+ [(set (match_operand:QI 0 "bitwise_memory_operand" "+Sbw,Sbv")
+ (ior:QI
+ (ashift:QI (const_int 1)
+ (match_operand:QI 1 "const_int_operand" "K03,K03"))
+ (match_dup 0)))]
+ "TARGET_SH2A && TARGET_BITOPS"
+ "@
+ bset.b\\t%1,%0
+ bset.b\\t%1,@(0,%t0)"
+ [(set_attr "length" "4,4")])
+
+(define_insn "bsetmem_m2a"
+ [(set (match_operand:QI 0 "bitwise_memory_operand" "+Sbw,Sbv")
+ (ior:QI (match_dup 0)
+ (match_operand:QI 1 "const_int_operand" "Pso,Pso")))]
+ "TARGET_SH2A && satisfies_constraint_Pso (operands[1]) && TARGET_BITOPS"
+ "@
+ bset.b\\t%V1,%0
+ bset.b\\t%V1,@(0,%t0)"
+ [(set_attr "length" "4,4")])
+
+;;; Transfer the contents of the T bit to a specified bit of memory.
+(define_insn "bst_m2a"
+ [(set (match_operand:QI 0 "bitwise_memory_operand" "+Sbw,m")
+ (if_then_else (eq (reg:SI T_REG) (const_int 0))
+ (and:QI
+ (not:QI (ashift:QI (const_int 1)
+ (match_operand:QI 1 "const_int_operand" "K03,K03")))
+ (match_dup 0))
+ (ior:QI
+ (ashift:QI (const_int 1) (match_dup 1))
+ (match_dup 0))))]
+ "TARGET_SH2A && TARGET_BITOPS"
+ "@
+ bst.b\\t%1,%0
+ bst.b\\t%1,@(0,%t0)"
+ [(set_attr "length" "4")])
+
+;; Store a specified bit of memory in the T bit.
+(define_insn "bld_m2a"
+ [(set (reg:SI T_REG)
+ (zero_extract:SI
+ (match_operand:QI 0 "bitwise_memory_operand" "Sbw,Sbv")
+ (const_int 1)
+ (match_operand 1 "const_int_operand" "K03,K03")))]
+ "TARGET_SH2A && TARGET_BITOPS"
+ "@
+ bld.b\\t%1,%0
+ bld.b\\t%1,@(0,%t0)"
+ [(set_attr "length" "4,4")])
+
+;; Store a specified bit of memory in the T bit.
+(define_insn "bldsign_m2a"
+ [(set (reg:SI T_REG)
+ (sign_extract:SI
+ (match_operand:QI 0 "bitwise_memory_operand" "Sbw,m")
+ (const_int 1)
+ (match_operand 1 "const_int_operand" "K03,K03")))]
+ "TARGET_SH2A && TARGET_BITOPS"
+ "@
+ bld.b\\t%1,%0
+ bld.b\\t%1,@(0,%t0)"
+ [(set_attr "length" "4,4")])
+
+;; Store a specified bit of the LSB 8 bits of a register in the T bit.
+(define_insn "bld_reg"
+ [(set (reg:SI T_REG)
+ (zero_extract:SI (match_operand:SI 0 "arith_reg_operand" "r")
+ (const_int 1)
+ (match_operand 1 "const_int_operand" "K03")))]
+ "TARGET_SH2A"
+ "bld\\t%1,%0")
+
+(define_insn "*bld_regqi"
+ [(set (reg:SI T_REG)
+ (zero_extract:SI (match_operand:QI 0 "arith_reg_operand" "r")
+ (const_int 1)
+ (match_operand 1 "const_int_operand" "K03")))]
+ "TARGET_SH2A"
+ "bld\\t%1,%0")
+
+;; Take logical and of a specified bit of memory with the T bit and
+;; store its result in the T bit.
+(define_insn "band_m2a"
+ [(set (reg:SI T_REG)
+ (and:SI (reg:SI T_REG)
+ (zero_extract:SI
+ (match_operand:QI 0 "bitwise_memory_operand" "Sbw,m")
+ (const_int 1)
+ (match_operand 1 "const_int_operand" "K03,K03"))))]
+ "TARGET_SH2A && TARGET_BITOPS"
+ "@
+ band.b\\t%1,%0
+ band.b\\t%1,@(0,%t0)"
+ [(set_attr "length" "4,4")])
+
+(define_insn "bandreg_m2a"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (and:SI (zero_extract:SI
+ (match_operand:QI 1 "bitwise_memory_operand" "Sbw,Sbv")
+ (const_int 1)
+ (match_operand 2 "const_int_operand" "K03,K03"))
+ (match_operand:SI 3 "register_operand" "r,r")))]
+ "TARGET_SH2A && TARGET_BITOPS"
+ "@
+ band.b\\t%2,%1\;movt\\t%0
+ band.b\\t%2,@(0,%t1)\;movt\\t%0"
+ [(set_attr "length" "6,6")])
+
+;; Take logical or of a specified bit of memory with the T bit and
+;; store its result in the T bit.
+(define_insn "bor_m2a"
+ [(set (reg:SI T_REG)
+ (ior:SI (reg:SI T_REG)
+ (zero_extract:SI
+ (match_operand:QI 0 "bitwise_memory_operand" "Sbw,m")
+ (const_int 1)
+ (match_operand 1 "const_int_operand" "K03,K03"))))]
+ "TARGET_SH2A && TARGET_BITOPS"
+ "@
+ bor.b\\t%1,%0
+ bor.b\\t%1,@(0,%t0)"
+ [(set_attr "length" "4,4")])
+
+(define_insn "borreg_m2a"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (ior:SI (zero_extract:SI
+ (match_operand:QI 1 "bitwise_memory_operand" "Sbw,Sbv")
+ (const_int 1)
+ (match_operand 2 "const_int_operand" "K03,K03"))
+ (match_operand:SI 3 "register_operand" "=r,r")))]
+ "TARGET_SH2A && TARGET_BITOPS"
+ "@
+ bor.b\\t%2,%1\;movt\\t%0
+ bor.b\\t%2,@(0,%t1)\;movt\\t%0"
+ [(set_attr "length" "6,6")])
+
+;; Take exclusive or of a specified bit of memory with the T bit and
+;; store its result in the T bit.
+(define_insn "bxor_m2a"
+ [(set (reg:SI T_REG)
+ (xor:SI (reg:SI T_REG)
+ (zero_extract:SI
+ (match_operand:QI 0 "bitwise_memory_operand" "Sbw,m")
+ (const_int 1)
+ (match_operand 1 "const_int_operand" "K03,K03"))))]
+ "TARGET_SH2A && TARGET_BITOPS"
+ "@
+ bxor.b\\t%1,%0
+ bxor.b\\t%1,@(0,%t0)"
+ [(set_attr "length" "4,4")])
+
+(define_insn "bxorreg_m2a"
+ [(set (match_operand:SI 0 "register_operand" "=r,r")
+ (xor:SI (zero_extract:SI
+ (match_operand:QI 1 "bitwise_memory_operand" "Sbw,Sbv")
+ (const_int 1)
+ (match_operand 2 "const_int_operand" "K03,K03"))
+ (match_operand:SI 3 "register_operand" "=r,r")))]
+ "TARGET_SH2A && TARGET_BITOPS"
+ "@
+ bxor.b\\t%2,%1\;movt\\t%0
+ bxor.b\\t%2,@(0,%t1)\;movt\\t%0"
+ [(set_attr "length" "6,6")])
+
\f
;; -------------------------------------------------------------------------
;; Peepholes
;; -------------------------------------------------------------------------
+;; This matches cases where the bit in a memory location is set.
+(define_peephole2
+ [(set (match_operand:SI 0 "arith_reg_operand" "r,r")
+ (sign_extend:SI (match_operand:QI 1 "bitwise_memory_operand" "Sbw,Sbv")))
+ (set (match_dup 0)
+ (ior:SI (match_dup 0)
+ (match_operand:SI 2 "const_int_operand" "Pso,Pso")))
+ (set (match_dup 1)
+ (match_operand 3 "arith_reg_operand" "r,r"))]
+ "TARGET_SH2A && TARGET_BITOPS
+ && satisfies_constraint_Pso (operands[2])
+ && REGNO (operands[0]) == REGNO (operands[3])"
+ [(set (match_dup 1)
+ (ior:QI (match_dup 1)
+ (match_dup 2)))]
+ "")
+
+;; This matches cases where the bit in a memory location is cleared.
+(define_peephole2
+ [(set (match_operand:SI 0 "arith_reg_operand" "r,r")
+ (sign_extend:SI (match_operand:QI 1 "bitwise_memory_operand" "Sbw,Sbv")))
+ (set (match_dup 0)
+ (and:SI (match_dup 0)
+ (match_operand:SI 2 "const_int_operand" "Psz,Psz")))
+ (set (match_dup 1)
+ (match_operand 3 "arith_reg_operand" "r,r"))]
+ "TARGET_SH2A && TARGET_BITOPS
+ && satisfies_constraint_Psz (operands[2])
+ && REGNO (operands[0]) == REGNO (operands[3])"
+ [(set (match_dup 1)
+ (and:QI (match_dup 1)
+ (match_dup 2)))]
+ "")
;; This matches cases where a stack pointer increment at the start of the
;; epilogue combines with a stack slot read loading the return value.
[(prefetch (match_operand 0 "address_operand" "p")
(match_operand:SI 1 "const_int_operand" "n")
(match_operand:SI 2 "const_int_operand" "n"))]
- "(TARGET_HARD_SH4 || TARGET_SH5) && (TARGET_SHMEDIA || !TARGET_VXWORKS_RTP)"
+ "TARGET_SH2A || ((TARGET_HARD_SH4 || TARGET_SH5)
+ && (TARGET_SHMEDIA || !TARGET_VXWORKS_RTP))"
"
{
if (GET_MODE (operands[0]) != Pmode
operands[0] = force_reg (Pmode, operands[0]);
}")
+(define_insn "prefetch_m2a"
+ [(prefetch (match_operand:SI 0 "register_operand" "r")
+ (match_operand:SI 1 "const_int_operand" "n")
+ (match_operand:SI 2 "const_int_operand" "n"))]
+ "TARGET_SH2A"
+ "pref\\t@%0"
+ [(set_attr "type" "other")])
+
(define_insn "alloco_i"
[(set (mem:BLK (match_operand:QI 0 "cache_address_operand" "p"))
(unspec:BLK [(const_int 0)] UNSPEC_ALLOCO))]