-/* Output routines for GCC for Hitachi / SuperH SH.
+/* Output routines for GCC for Renesas / SuperH SH.
Copyright (C) 1993, 1994, 1995, 1997, 1997, 1998, 1999, 2000, 2001, 2002,
- 2003 Free Software Foundation, Inc.
+ 2003, 2004 Free Software Foundation, Inc.
Contributed by Steve Chamberlain (sac@cygnus.com).
Improved by Jim Wilson (wilson@cygnus.com).
-This file is part of GNU CC.
+This file is part of GCC.
-GNU CC is free software; you can redistribute it and/or modify
+GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
-GNU CC is distributed in the hope that it will be useful,
+GCC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
+along with GCC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#include "basic-block.h"
#include "ra.h"
#include "cfglayout.h"
+#include "intl.h"
+#include "sched-int.h"
+#include "ggc.h"
int code_for_indirect_jump_scratch = CODE_FOR_indirect_jump_scratch;
/* These are some macros to abstract register modes. */
#define CONST_OK_FOR_ADD(size) \
- (TARGET_SHMEDIA ? CONST_OK_FOR_P (size) : CONST_OK_FOR_I (size))
+ (TARGET_SHMEDIA ? CONST_OK_FOR_I10 (size) : CONST_OK_FOR_I08 (size))
#define GEN_MOV (*(TARGET_SHMEDIA64 ? gen_movdi : gen_movsi))
#define GEN_ADD3 (*(TARGET_SHMEDIA64 ? gen_adddi3 : gen_addsi3))
#define GEN_SUB3 (*(TARGET_SHMEDIA64 ? gen_subdi3 : gen_subsi3))
interrupted. */
int pragma_nosave_low_regs;
-/* This is used for communication between SETUP_INCOMING_VARARGS and
+/* This is used for communication between TARGET_SETUP_INCOMING_VARARGS and
sh_expand_prologue. */
int current_function_anonymous_args;
/* Which cpu are we scheduling for. */
enum processor_type sh_cpu;
+/* Definitions used in ready queue reordering for first scheduling pass. */
+
+/* Reg weights arrays for modes SFmode and SImode, indexed by insn LUID. */
+static short *regmode_weight[2];
+
+/* Total SFmode and SImode weights of scheduled insns. */
+static int curr_regmode_pressure[2];
+
+/* If true, skip cycles for Q -> R movement. */
+static int skip_cycles = 0;
+
+/* Cached value of can_issue_more. This is cached in sh_variable_issue hook
+ and returned from sh_reorder2. */
+static short cached_can_issue_more;
+
/* Saved operands from the last compare to use when we generate an scc
or bcc insn. */
/* Provides the class number of the smallest class containing
reg number. */
-int regno_reg_class[FIRST_PSEUDO_REGISTER] =
+enum reg_class regno_reg_class[FIRST_PSEUDO_REGISTER] =
{
R0_REGS, GENERAL_REGS, GENERAL_REGS, GENERAL_REGS,
GENERAL_REGS, GENERAL_REGS, GENERAL_REGS, GENERAL_REGS,
int assembler_dialect;
-static void split_branches PARAMS ((rtx));
-static int branch_dest PARAMS ((rtx));
-static void force_into PARAMS ((rtx, rtx));
-static void print_slot PARAMS ((rtx));
-static rtx add_constant PARAMS ((rtx, enum machine_mode, rtx));
-static void dump_table PARAMS ((rtx));
-static int hi_const PARAMS ((rtx));
-static int broken_move PARAMS ((rtx));
-static int mova_p PARAMS ((rtx));
-static rtx find_barrier PARAMS ((int, rtx, rtx));
-static int noncall_uses_reg PARAMS ((rtx, rtx, rtx *));
-static rtx gen_block_redirect PARAMS ((rtx, int, int));
-static void sh_reorg PARAMS ((void));
-static void output_stack_adjust PARAMS ((int, rtx, int, rtx (*) (rtx)));
-static rtx frame_insn PARAMS ((rtx));
-static rtx push PARAMS ((int));
-static void pop PARAMS ((int));
-static void push_regs PARAMS ((HARD_REG_SET *, int));
-static int calc_live_regs PARAMS ((HARD_REG_SET *));
-static void mark_use PARAMS ((rtx, rtx *));
-static HOST_WIDE_INT rounded_frame_size PARAMS ((int));
-static rtx mark_constant_pool_use PARAMS ((rtx));
+static bool shmedia_space_reserved_for_target_registers;
+
+static void split_branches (rtx);
+static int branch_dest (rtx);
+static void force_into (rtx, rtx);
+static void print_slot (rtx);
+static rtx add_constant (rtx, enum machine_mode, rtx);
+static void dump_table (rtx);
+static int hi_const (rtx);
+static int broken_move (rtx);
+static int mova_p (rtx);
+static rtx find_barrier (int, rtx, rtx);
+static int noncall_uses_reg (rtx, rtx, rtx *);
+static rtx gen_block_redirect (rtx, int, int);
+static void sh_reorg (void);
+static void output_stack_adjust (int, rtx, int, HARD_REG_SET *);
+static rtx frame_insn (rtx);
+static rtx push (int);
+static void pop (int);
+static void push_regs (HARD_REG_SET *, int);
+static int calc_live_regs (HARD_REG_SET *);
+static void mark_use (rtx, rtx *);
+static HOST_WIDE_INT rounded_frame_size (int);
+static rtx mark_constant_pool_use (rtx);
const struct attribute_spec sh_attribute_table[];
-static tree sh_handle_interrupt_handler_attribute PARAMS ((tree *, tree, tree, int, bool *));
-static tree sh_handle_sp_switch_attribute PARAMS ((tree *, tree, tree, int, bool *));
-static tree sh_handle_trap_exit_attribute PARAMS ((tree *, tree, tree, int, bool *));
-static void sh_output_function_epilogue PARAMS ((FILE *, HOST_WIDE_INT));
-static void sh_insert_attributes PARAMS ((tree, tree *));
-static int sh_adjust_cost PARAMS ((rtx, rtx, rtx, int));
-static int sh_use_dfa_interface PARAMS ((void));
-static int sh_issue_rate PARAMS ((void));
-static bool sh_function_ok_for_sibcall PARAMS ((tree, tree));
-
-static bool sh_cannot_modify_jumps_p PARAMS ((void));
-static bool sh_ms_bitfield_layout_p PARAMS ((tree));
-
-static void sh_init_builtins PARAMS ((void));
-static void sh_media_init_builtins PARAMS ((void));
-static rtx sh_expand_builtin PARAMS ((tree, rtx, rtx, enum machine_mode, int));
-static void sh_output_mi_thunk PARAMS ((FILE *, tree, HOST_WIDE_INT,
- HOST_WIDE_INT, tree));
-static int flow_dependent_p PARAMS ((rtx, rtx));
-static void flow_dependent_p_1 PARAMS ((rtx, rtx, void *));
-static int shiftcosts PARAMS ((rtx));
-static int andcosts PARAMS ((rtx));
-static int addsubcosts PARAMS ((rtx));
-static int multcosts PARAMS ((rtx));
-static bool unspec_caller_rtx_p PARAMS ((rtx));
-static bool sh_cannot_copy_insn_p PARAMS ((rtx));
-static bool sh_rtx_costs PARAMS ((rtx, int, int, int *));
-static int sh_address_cost PARAMS ((rtx));
+static tree sh_handle_interrupt_handler_attribute (tree *, tree, tree, int, bool *);
+static tree sh_handle_sp_switch_attribute (tree *, tree, tree, int, bool *);
+static tree sh_handle_trap_exit_attribute (tree *, tree, tree, int, bool *);
+static tree sh_handle_renesas_attribute (tree *, tree, tree, int, bool *);
+static void sh_output_function_epilogue (FILE *, HOST_WIDE_INT);
+static void sh_insert_attributes (tree, tree *);
+static int sh_adjust_cost (rtx, rtx, rtx, int);
+static int sh_use_dfa_interface (void);
+static int sh_issue_rate (void);
+static int sh_dfa_new_cycle (FILE *, int, rtx, int, int, int *sort_p);
+static short find_set_regmode_weight (rtx, enum machine_mode);
+static short find_insn_regmode_weight (rtx, enum machine_mode);
+static void find_regmode_weight (int, enum machine_mode);
+static void sh_md_init_global (FILE *, int, int);
+static void sh_md_finish_global (FILE *, int);
+static int rank_for_reorder (const void *, const void *);
+static void swap_reorder (rtx *, int);
+static void ready_reorder (rtx *, int);
+static short high_pressure (enum machine_mode);
+static int sh_reorder (FILE *, int, rtx *, int *, int);
+static int sh_reorder2 (FILE *, int, rtx *, int *, int);
+static void sh_md_init (FILE *, int, int);
+static int sh_variable_issue (FILE *, int, rtx, int);
+
+static bool sh_function_ok_for_sibcall (tree, tree);
+
+static bool sh_cannot_modify_jumps_p (void);
+static int sh_target_reg_class (void);
+static bool sh_optimize_target_register_callee_saved (bool);
+static bool sh_ms_bitfield_layout_p (tree);
+
+static void sh_init_builtins (void);
+static void sh_media_init_builtins (void);
+static rtx sh_expand_builtin (tree, rtx, rtx, enum machine_mode, int);
+static void sh_output_mi_thunk (FILE *, tree, HOST_WIDE_INT, HOST_WIDE_INT, tree);
+static void sh_file_start (void);
+static int flow_dependent_p (rtx, rtx);
+static void flow_dependent_p_1 (rtx, rtx, void *);
+static int shiftcosts (rtx);
+static int andcosts (rtx);
+static int addsubcosts (rtx);
+static int multcosts (rtx);
+static bool unspec_caller_rtx_p (rtx);
+static bool sh_cannot_copy_insn_p (rtx);
+static bool sh_rtx_costs (rtx, int, int, int *);
+static int sh_address_cost (rtx);
+static int shmedia_target_regs_stack_space (HARD_REG_SET *);
+static int shmedia_reserve_space_for_target_registers_p (int, HARD_REG_SET *);
+static int shmedia_target_regs_stack_adjust (HARD_REG_SET *);
+static int scavenge_reg (HARD_REG_SET *s);
+struct save_schedule_s;
+static struct save_entry_s *sh5_schedule_saves (HARD_REG_SET *,
+ struct save_schedule_s *, int);
+
+static rtx sh_struct_value_rtx (tree, int);
+static bool sh_return_in_memory (tree, tree);
+static rtx sh_builtin_saveregs (void);
+static void sh_setup_incoming_varargs (CUMULATIVE_ARGS *, enum machine_mode, tree, int *, int);
+static bool sh_strict_argument_naming (CUMULATIVE_ARGS *);
+static bool sh_pretend_outgoing_varargs_named (CUMULATIVE_ARGS *);
+static tree sh_build_builtin_va_list (void);
+
\f
/* Initialize the GCC target structure. */
#undef TARGET_ATTRIBUTE_TABLE
#undef TARGET_ASM_CAN_OUTPUT_MI_THUNK
#define TARGET_ASM_CAN_OUTPUT_MI_THUNK hook_bool_tree_hwi_hwi_tree_true
+#undef TARGET_ASM_FILE_START
+#define TARGET_ASM_FILE_START sh_file_start
+#undef TARGET_ASM_FILE_START_FILE_DIRECTIVE
+#define TARGET_ASM_FILE_START_FILE_DIRECTIVE true
+
#undef TARGET_INSERT_ATTRIBUTES
#define TARGET_INSERT_ATTRIBUTES sh_insert_attributes
#undef TARGET_SCHED_ISSUE_RATE
#define TARGET_SCHED_ISSUE_RATE sh_issue_rate
+/* The next 5 hooks have been implemented for reenabling sched1. With the
+ help of these macros we are limiting the movement of insns in sched1 to
+ reduce the register pressure. The overall idea is to keep count of SImode
+ and SFmode regs required by already scheduled insns. When these counts
+ cross some threshold values; give priority to insns that free registers.
+ The insn that frees registers is most likely to be the insn with lowest
+ LUID (original insn order); but such an insn might be there in the stalled
+ queue (Q) instead of the ready queue (R). To solve this, we skip cycles
+ upto a max of 8 cycles so that such insns may move from Q -> R.
+
+ The description of the hooks are as below:
+
+ TARGET_SCHED_INIT_GLOBAL: Added a new target hook in the generic
+ scheduler; it is called inside the sched_init function just after
+ find_insn_reg_weights function call. It is used to calculate the SImode
+ and SFmode weights of insns of basic blocks; much similiar to what
+ find_insn_reg_weights does.
+ TARGET_SCHED_FINISH_GLOBAL: Corresponding cleanup hook.
+
+ TARGET_SCHED_DFA_NEW_CYCLE: Skip cycles if high register pressure is
+ indicated by TARGET_SCHED_REORDER2; doing this may move insns from
+ (Q)->(R).
+
+ TARGET_SCHED_REORDER: If the register pressure for SImode or SFmode is
+ high; reorder the ready queue so that the insn with lowest LUID will be
+ issued next.
+
+ TARGET_SCHED_REORDER2: If the register pressure is high, indicate to
+ TARGET_SCHED_DFA_NEW_CYCLE to skip cycles.
+
+ TARGET_SCHED_VARIABLE_ISSUE: Cache the value of can_issue_more so that it
+ can be returned from TARGET_SCHED_REORDER2.
+
+ TARGET_SCHED_INIT: Reset the register pressure counting variables. */
+
+#undef TARGET_SCHED_DFA_NEW_CYCLE
+#define TARGET_SCHED_DFA_NEW_CYCLE sh_dfa_new_cycle
+
+#undef TARGET_SCHED_INIT_GLOBAL
+#define TARGET_SCHED_INIT_GLOBAL sh_md_init_global
+
+#undef TARGET_SCHED_FINISH_GLOBAL
+#define TARGET_SCHED_FINISH_GLOBAL sh_md_finish_global
+
+#undef TARGET_SCHED_VARIABLE_ISSUE
+#define TARGET_SCHED_VARIABLE_ISSUE sh_variable_issue
+
+#undef TARGET_SCHED_REORDER
+#define TARGET_SCHED_REORDER sh_reorder
+
+#undef TARGET_SCHED_REORDER2
+#define TARGET_SCHED_REORDER2 sh_reorder2
+
+#undef TARGET_SCHED_INIT
+#define TARGET_SCHED_INIT sh_md_init
+
#undef TARGET_CANNOT_MODIFY_JUMPS_P
#define TARGET_CANNOT_MODIFY_JUMPS_P sh_cannot_modify_jumps_p
+#undef TARGET_BRANCH_TARGET_REGISTER_CLASS
+#define TARGET_BRANCH_TARGET_REGISTER_CLASS sh_target_reg_class
+#undef TARGET_BRANCH_TARGET_REGISTER_CALLEE_SAVED
+#define TARGET_BRANCH_TARGET_REGISTER_CALLEE_SAVED \
+ sh_optimize_target_register_callee_saved
#undef TARGET_MS_BITFIELD_LAYOUT_P
#define TARGET_MS_BITFIELD_LAYOUT_P sh_ms_bitfield_layout_p
#define TARGET_HAVE_TLS true
#endif
+#undef TARGET_PROMOTE_PROTOTYPES
+#define TARGET_PROMOTE_PROTOTYPES sh_promote_prototypes
+#undef TARGET_PROMOTE_FUNCTION_ARGS
+#define TARGET_PROMOTE_FUNCTION_ARGS sh_promote_prototypes
+#undef TARGET_PROMOTE_FUNCTION_RETURN
+#define TARGET_PROMOTE_FUNCTION_RETURN sh_promote_prototypes
+
+#undef TARGET_STRUCT_VALUE_RTX
+#define TARGET_STRUCT_VALUE_RTX sh_struct_value_rtx
+#undef TARGET_RETURN_IN_MEMORY
+#define TARGET_RETURN_IN_MEMORY sh_return_in_memory
+
+#undef TARGET_EXPAND_BUILTIN_SAVEREGS
+#define TARGET_EXPAND_BUILTIN_SAVEREGS sh_builtin_saveregs
+#undef TARGET_SETUP_INCOMING_VARARGS
+#define TARGET_SETUP_INCOMING_VARARGS sh_setup_incoming_varargs
+#undef TARGET_STRICT_ARGUMENT_NAMING
+#define TARGET_STRICT_ARGUMENT_NAMING sh_strict_argument_naming
+#undef TARGET_PRETEND_OUTGOING_VARARGS_NAMED
+#define TARGET_PRETEND_OUTGOING_VARARGS_NAMED sh_pretend_outgoing_varargs_named
+
+#undef TARGET_BUILD_BUILTIN_VA_LIST
+#define TARGET_BUILD_BUILTIN_VA_LIST sh_build_builtin_va_list
+
+#undef TARGET_PCH_VALID_P
+#define TARGET_PCH_VALID_P sh_pch_valid_p
+
+/* Return regmode weight for insn. */
+#define INSN_REGMODE_WEIGHT(INSN, MODE) regmode_weight[((MODE) == SImode) ? 0 : 1][INSN_UID (INSN)]
+
+/* Return current register pressure for regmode. */
+#define CURR_REGMODE_PRESSURE(MODE) curr_regmode_pressure[((MODE) == SImode) ? 0 : 1]
+
struct gcc_target targetm = TARGET_INITIALIZER;
\f
/* Print the operand address in x to the stream. */
void
-print_operand_address (stream, x)
- FILE *stream;
- rtx x;
+print_operand_address (FILE *stream, rtx x)
{
switch (GET_CODE (x))
{
',' print LOCAL_LABEL_PREFIX
'@' print trap, rte or rts depending upon pragma interruptness
'#' output a nop if there is nothing to put in the delay slot
- ''' print likelyhood suffix (/u for unlikely).
+ ''' print likelihood suffix (/u for unlikely).
'O' print a constant without the #
'R' print the LSW of a dp value - changes if in little endian
'S' print the MSW of a dp value - changes if in little endian
'o' output an operator. */
void
-print_operand (stream, x, code)
- FILE *stream;
- rtx x;
- int code;
+print_operand (FILE *stream, rtx x, int code)
{
switch (code)
{
\f
/* Like force_operand, but guarantees that VALUE ends up in TARGET. */
static void
-force_into (value, target)
- rtx value, target;
+force_into (rtx value, rtx target)
{
value = force_operand (value, target);
if (! rtx_equal_p (value, target))
OPERANDS[3] is the alignment safe to use. */
int
-expand_block_move (operands)
- rtx *operands;
+expand_block_move (rtx *operands)
{
int align = INTVAL (operands[3]);
int constp = (GET_CODE (operands[2]) == CONST_INT);
tree entry_name;
rtx sym;
rtx func_addr_rtx;
- rtx r4 = gen_rtx (REG, SImode, 4);
- rtx r5 = gen_rtx (REG, SImode, 5);
+ rtx r4 = gen_rtx_REG (SImode, 4);
+ rtx r5 = gen_rtx_REG (SImode, 5);
entry_name = get_identifier ("__movstrSI12_i4");
rtx sym;
rtx func_addr_rtx;
int dwords;
- rtx r4 = gen_rtx (REG, SImode, 4);
- rtx r5 = gen_rtx (REG, SImode, 5);
- rtx r6 = gen_rtx (REG, SImode, 6);
+ rtx r4 = gen_rtx_REG (SImode, 4);
+ rtx r5 = gen_rtx_REG (SImode, 5);
+ rtx r6 = gen_rtx_REG (SImode, 6);
entry_name = get_identifier (bytes & 4
? "__movstr_i4_odd"
operands must be in a register. */
int
-prepare_move_operands (operands, mode)
- rtx operands[];
- enum machine_mode mode;
+prepare_move_operands (rtx operands[], enum machine_mode mode)
{
if ((mode == SImode || mode == DImode)
&& flag_pic
{
case TLS_MODEL_GLOBAL_DYNAMIC:
tga_ret = gen_rtx_REG (Pmode, R0_REG);
- emit_insn (gen_tls_global_dynamic (tga_ret, op1));
+ emit_call_insn (gen_tls_global_dynamic (tga_ret, op1));
op1 = tga_ret;
break;
case TLS_MODEL_LOCAL_DYNAMIC:
tga_ret = gen_rtx_REG (Pmode, R0_REG);
- emit_insn (gen_tls_local_dynamic (tga_ret, op1));
+ emit_call_insn (gen_tls_local_dynamic (tga_ret, op1));
tmp = gen_reg_rtx (Pmode);
emit_move_insn (tmp, tga_ret);
/* Prepare the operands for an scc instruction; make sure that the
compare has been done. */
rtx
-prepare_scc_operands (code)
- enum rtx_code code;
+prepare_scc_operands (enum rtx_code code)
{
rtx t_reg = gen_rtx_REG (SImode, T_REG);
enum rtx_code oldcode = code;
if (TARGET_SH4 && GET_MODE_CLASS (mode) == MODE_FLOAT)
(mode == SFmode ? emit_sf_insn : emit_df_insn)
- (gen_rtx (PARALLEL, VOIDmode, gen_rtvec (2,
- gen_rtx (SET, VOIDmode, t_reg,
- gen_rtx (code, SImode,
- sh_compare_op0, sh_compare_op1)),
- gen_rtx (USE, VOIDmode, get_fpscr_rtx ()))));
+ (gen_rtx_PARALLEL (VOIDmode, gen_rtvec (2,
+ gen_rtx_SET (VOIDmode, t_reg,
+ gen_rtx_fmt_ee (code, SImode,
+ sh_compare_op0, sh_compare_op1)),
+ gen_rtx_USE (VOIDmode, get_fpscr_rtx ()))));
else
- emit_insn (gen_rtx (SET, VOIDmode, t_reg,
- gen_rtx (code, SImode, sh_compare_op0,
- sh_compare_op1)));
+ emit_insn (gen_rtx_SET (VOIDmode, t_reg,
+ gen_rtx_fmt_ee (code, SImode,
+ sh_compare_op0, sh_compare_op1)));
return t_reg;
}
/* Called from the md file, set up the operands of a compare instruction. */
void
-from_compare (operands, code)
- rtx *operands;
- int code;
+from_compare (rtx *operands, int code)
{
enum machine_mode mode = GET_MODE (sh_compare_op0);
rtx insn;
else
insn = gen_rtx_SET (VOIDmode,
gen_rtx_REG (SImode, T_REG),
- gen_rtx (code, SImode, sh_compare_op0,
- sh_compare_op1));
+ gen_rtx_fmt_ee (code, SImode,
+ sh_compare_op0, sh_compare_op1));
if (TARGET_SH4 && GET_MODE_CLASS (mode) == MODE_FLOAT)
{
- insn = gen_rtx (PARALLEL, VOIDmode,
+ insn = gen_rtx_PARALLEL (VOIDmode,
gen_rtvec (2, insn,
- gen_rtx (USE, VOIDmode, get_fpscr_rtx ())));
+ gen_rtx_USE (VOIDmode, get_fpscr_rtx ())));
(mode == SFmode ? emit_sf_insn : emit_df_insn) (insn);
}
else
to take care when we see overlapping source and dest registers. */
const char *
-output_movedouble (insn, operands, mode)
- rtx insn ATTRIBUTE_UNUSED;
- rtx operands[];
- enum machine_mode mode;
+output_movedouble (rtx insn ATTRIBUTE_UNUSED, rtx operands[],
+ enum machine_mode mode)
{
rtx dst = operands[0];
rtx src = operands[1];
into a sequence where putting the slot insn at the end wouldn't work. */
static void
-print_slot (insn)
- rtx insn;
+print_slot (rtx insn)
{
- final_scan_insn (XVECEXP (insn, 0, 1), asm_out_file, optimize, 0, 1);
+ final_scan_insn (XVECEXP (insn, 0, 1), asm_out_file, optimize, 0, 1, NULL);
INSN_DELETED_P (XVECEXP (insn, 0, 1)) = 1;
}
const char *
-output_far_jump (insn, op)
- rtx insn;
- rtx op;
+output_far_jump (rtx insn, rtx op)
{
struct { rtx lab, reg, op; } this;
rtx braf_base_lab = NULL_RTX;
/* Output code for ordinary branches. */
const char *
-output_branch (logic, insn, operands)
- int logic;
- rtx insn;
- rtx *operands;
+output_branch (int logic, rtx insn, rtx *operands)
{
switch (get_attr_length (insn))
{
output_asm_insn ("bra\t%l0", &op0);
fprintf (asm_out_file, "\tnop\n");
- (*targetm.asm_out.internal_label)(asm_out_file, "LF", label);
+ (*targetm.asm_out.internal_label) (asm_out_file, "LF", label);
return "";
}
}
const char *
-output_branchy_insn (code, template, insn, operands)
- enum rtx_code code;
- const char *template;
- rtx insn;
- rtx *operands;
+output_branchy_insn (enum rtx_code code, const char *template,
+ rtx insn, rtx *operands)
{
rtx next_insn = NEXT_INSN (insn);
}
const char *
-output_ieee_ccmpeq (insn, operands)
- rtx insn, *operands;
+output_ieee_ccmpeq (rtx insn, rtx *operands)
{
return output_branchy_insn (NE, "bt\t%l9\\;fcmp/eq\t%1,%0", insn, operands);
}
\f
-/* Output to FILE the start of the assembler file. */
+/* Output the start of the assembler file. */
-void
-output_file_start (file)
- FILE *file;
-{
- output_file_directive (file, main_input_filename);
-
- /* Switch to the data section so that the coffsem symbol
- isn't in the text section. */
- data_section ();
+static void
+sh_file_start (void)
+{
+ default_file_start ();
+
+ if (TARGET_ELF)
+ /* We need to show the text section with the proper
+ attributes as in TEXT_SECTION_ASM_OP, before dwarf2out
+ emits it without attributes in TEXT_SECTION_ASM_OP, else GAS
+ will complain. We can teach GAS specifically about the
+ default attributes for our choice of text section, but
+ then we would have to change GAS again if/when we change
+ the text section name. */
+ fprintf (asm_out_file, "%s\n", TEXT_SECTION_ASM_OP);
+ else
+ /* Switch to the data section so that the coffsem symbol
+ isn't in the text section. */
+ data_section ();
if (TARGET_LITTLE_ENDIAN)
- fprintf (file, "\t.little\n");
+ fputs ("\t.little\n", asm_out_file);
- if (TARGET_SHCOMPACT)
- fprintf (file, "\t.mode\tSHcompact\n");
- else if (TARGET_SHMEDIA)
- fprintf (file, "\t.mode\tSHmedia\n\t.abi\t%i\n",
- TARGET_SHMEDIA64 ? 64 : 32);
+ if (!TARGET_ELF)
+ {
+ if (TARGET_SHCOMPACT)
+ fputs ("\t.mode\tSHcompact\n", asm_out_file);
+ else if (TARGET_SHMEDIA)
+ fprintf (asm_out_file, "\t.mode\tSHmedia\n\t.abi\t%i\n",
+ TARGET_SHMEDIA64 ? 64 : 32);
+ }
}
\f
/* Check if PAT includes UNSPEC_CALLER unspec pattern. */
static bool
-unspec_caller_rtx_p (pat)
- rtx pat;
+unspec_caller_rtx_p (rtx pat)
{
switch (GET_CODE (pat))
{
that generates an unique label. */
static bool
-sh_cannot_copy_insn_p (insn)
- rtx insn;
+sh_cannot_copy_insn_p (rtx insn)
{
rtx pat;
of arbitrary constant shift instructions. */
int
-shift_insns_rtx (insn)
- rtx insn;
+shift_insns_rtx (rtx insn)
{
rtx set_src = SET_SRC (XVECEXP (PATTERN (insn), 0, 0));
int shift_count = INTVAL (XEXP (set_src, 1));
case ASHIFT:
return shift_insns[shift_count];
default:
- abort();
+ abort ();
}
}
/* Return the cost of a shift. */
static inline int
-shiftcosts (x)
- rtx x;
+shiftcosts (rtx x)
{
int value;
/* Return the cost of an AND operation. */
static inline int
-andcosts (x)
- rtx x;
+andcosts (rtx x)
{
int i;
if (TARGET_SHMEDIA)
{
if ((GET_CODE (XEXP (x, 1)) == CONST_INT
- && CONST_OK_FOR_J (INTVAL (XEXP (x, 1))))
- || EXTRA_CONSTRAINT_S (XEXP (x, 1)))
+ && CONST_OK_FOR_I16 (INTVAL (XEXP (x, 1))))
+ || EXTRA_CONSTRAINT_C16 (XEXP (x, 1)))
return 1;
else
return 2;
/* These constants are single cycle extu.[bw] instructions. */
if (i == 0xff || i == 0xffff)
return 1;
- /* Constants that can be used in an and immediate instruction is a single
+ /* Constants that can be used in an and immediate instruction in a single
cycle, but this requires r0, so make it a little more expensive. */
- if (CONST_OK_FOR_L (i))
+ if (CONST_OK_FOR_K08 (i))
return 2;
/* Constants that can be loaded with a mov immediate and an and.
This case is probably unnecessary. */
- if (CONST_OK_FOR_I (i))
+ if (CONST_OK_FOR_I08 (i))
return 2;
/* Any other constants requires a 2 cycle pc-relative load plus an and.
This case is probably unnecessary. */
/* Return the cost of an addition or a subtraction. */
static inline int
-addsubcosts (x)
- rtx x;
+addsubcosts (rtx x)
{
/* Adding a register is a single cycle insn. */
if (GET_CODE (XEXP (x, 1)) == REG
return TARGET_SHMEDIA64 ? 5 : 3;
case CONST_INT:
- if (CONST_OK_FOR_J (INTVAL (XEXP (x, 1))))
+ if (CONST_OK_FOR_I16 (INTVAL (XEXP (x, 1))))
return 2;
- else if (CONST_OK_FOR_J (INTVAL (XEXP (x, 1)) >> 16))
+ else if (CONST_OK_FOR_I16 (INTVAL (XEXP (x, 1)) >> 16))
return 3;
- else if (CONST_OK_FOR_J ((INTVAL (XEXP (x, 1)) >> 16) >> 16))
+ else if (CONST_OK_FOR_I16 ((INTVAL (XEXP (x, 1)) >> 16) >> 16))
return 4;
/* Fall through. */
default:
- return 5;
+ return 5;
}
/* Any other constant requires a 2 cycle pc-relative load plus an
/* Return the cost of a multiply. */
static inline int
-multcosts (x)
- rtx x ATTRIBUTE_UNUSED;
+multcosts (rtx x ATTRIBUTE_UNUSED)
{
if (TARGET_SHMEDIA)
return 3;
scanned. In either case, *TOTAL contains the cost result. */
static bool
-sh_rtx_costs (x, code, outer_code, total)
- rtx x;
- int code, outer_code, *total;
+sh_rtx_costs (rtx x, int code, int outer_code, int *total)
{
switch (code)
{
*total = 0;
else if ((outer_code == IOR || outer_code == XOR
|| outer_code == PLUS)
- && CONST_OK_FOR_P (INTVAL (x)))
+ && CONST_OK_FOR_I10 (INTVAL (x)))
*total = 0;
- else if (CONST_OK_FOR_J (INTVAL (x)))
+ else if (CONST_OK_FOR_I16 (INTVAL (x)))
*total = COSTS_N_INSNS (outer_code != SET);
- else if (CONST_OK_FOR_J (INTVAL (x) >> 16))
+ else if (CONST_OK_FOR_I16 (INTVAL (x) >> 16))
*total = COSTS_N_INSNS (2);
- else if (CONST_OK_FOR_J ((INTVAL (x) >> 16) >> 16))
+ else if (CONST_OK_FOR_I16 ((INTVAL (x) >> 16) >> 16))
*total = COSTS_N_INSNS (3);
else
*total = COSTS_N_INSNS (4);
return true;
}
- if (CONST_OK_FOR_I (INTVAL (x)))
+ if (CONST_OK_FOR_I08 (INTVAL (x)))
*total = 0;
else if ((outer_code == AND || outer_code == IOR || outer_code == XOR)
- && CONST_OK_FOR_L (INTVAL (x)))
+ && CONST_OK_FOR_K08 (INTVAL (x)))
*total = 1;
else
*total = 8;
since it increases pressure on r0. */
static int
-sh_address_cost (X)
- rtx X;
+sh_address_cost (rtx X)
{
return (GET_CODE (X) == PLUS
&& ! CONSTANT_P (XEXP (X, 1))
/* Code to expand a shift. */
void
-gen_ashift (type, n, reg)
- int type;
- int n;
- rtx reg;
+gen_ashift (int type, int n, rtx reg)
{
/* Negative values here come from the shift_amounts array. */
if (n < 0)
/* Same for HImode */
void
-gen_ashift_hi (type, n, reg)
- int type;
- int n;
- rtx reg;
+gen_ashift_hi (int type, int n, rtx reg)
{
/* Negative values here come from the shift_amounts array. */
if (n < 0)
shift instructions. */
void
-gen_shifty_op (code, operands)
- int code;
- rtx *operands;
+gen_shifty_op (int code, rtx *operands)
{
int value = INTVAL (operands[2]);
int max, i;
matter. */
void
-gen_shifty_hi_op (code, operands)
- int code;
- rtx *operands;
+gen_shifty_hi_op (int code, rtx *operands)
{
int value = INTVAL (operands[2]);
int max, i;
- void (*gen_fun) PARAMS ((int, int, rtx));
+ void (*gen_fun) (int, int, rtx);
/* This operation is used by and_shl for SImode values with a few
high bits known to be cleared. */
/* ??? Rewrite to use super-optimizer sequences. */
int
-expand_ashiftrt (operands)
- rtx *operands;
+expand_ashiftrt (rtx *operands)
{
rtx sym;
rtx wrk;
}
int
-sh_dynamicalize_shift_p (count)
- rtx count;
+sh_dynamicalize_shift_p (rtx count)
{
return shift_insns[INTVAL (count)] > 1 + SH_DYNAMIC_SHIFT_COST;
}
shift_amounts for the last shift value that is to be used before the
sign extend. */
int
-shl_and_kind (left_rtx, mask_rtx, attrp)
- rtx left_rtx, mask_rtx;
- int *attrp;
+shl_and_kind (rtx left_rtx, rtx mask_rtx, int *attrp)
{
unsigned HOST_WIDE_INT mask, lsb, mask2, lsb2;
int left = INTVAL (left_rtx), right;
mask = (unsigned HOST_WIDE_INT) INTVAL (mask_rtx) >> left;
else
mask = (unsigned HOST_WIDE_INT) GET_MODE_MASK (SImode) >> left;
- /* Can this be expressed as a right shift / left shift pair ? */
+ /* Can this be expressed as a right shift / left shift pair? */
lsb = ((mask ^ (mask - 1)) >> 1) + 1;
right = exact_log2 (lsb);
mask2 = ~(mask + lsb - 1);
int late_right = exact_log2 (lsb2);
best_cost = shift_insns[left + late_right] + shift_insns[late_right];
}
- /* Try to use zero extend */
+ /* Try to use zero extend. */
if (mask2 == ~(lsb2 - 1))
{
int width, first;
for (width = 8; width <= 16; width += 8)
{
- /* Can we zero-extend right away? */
- if (lsb2 == (unsigned HOST_WIDE_INT)1 << width)
+ /* Can we zero-extend right away? */
+ if (lsb2 == (unsigned HOST_WIDE_INT) 1 << width)
{
cost
= 1 + ext_shift_insns[right] + ext_shift_insns[left + right];
best_len = cost;
if (attrp)
attrp[2] = first;
- }
+ }
}
}
}
{
if (i > right)
break;
- if (! CONST_OK_FOR_L (mask >> i))
+ if (! CONST_OK_FOR_K08 (mask >> i))
continue;
cost = (i != 0) + 2 + ext_shift_insns[left + i];
if (cost < best_cost)
}
}
/* Try to use a scratch register to hold the AND operand. */
- can_ext = ((mask << left) & ((unsigned HOST_WIDE_INT)3 << 30)) == 0;
+ can_ext = ((mask << left) & ((unsigned HOST_WIDE_INT) 3 << 30)) == 0;
for (i = 0; i <= 2; i++)
{
if (i > right)
break;
- cost = (i != 0) + (CONST_OK_FOR_I (mask >> i) ? 2 : 3)
+ cost = (i != 0) + (CONST_OK_FOR_I08 (mask >> i) ? 2 : 3)
+ (can_ext ? ext_shift_insns : shift_insns)[left + i];
if (cost < best_cost)
{
best = 4 - can_ext;
best_cost = cost;
best_right = i;
- best_len = cost - 1 - ! CONST_OK_FOR_I (mask >> i);
+ best_len = cost - 1 - ! CONST_OK_FOR_I08 (mask >> i);
}
}
/* This is used in length attributes of the unnamed instructions
corresponding to shl_and_kind return values of 1 and 2. */
int
-shl_and_length (insn)
- rtx insn;
+shl_and_length (rtx insn)
{
rtx set_src, left_rtx, mask_rtx;
int attributes[3];
/* This is used in length attribute of the and_shl_scratch instruction. */
int
-shl_and_scr_length (insn)
- rtx insn;
+shl_and_scr_length (rtx insn)
{
rtx set_src = SET_SRC (XVECEXP (PATTERN (insn), 0, 0));
int len = shift_insns[INTVAL (XEXP (set_src, 1))];
method of generating them, i.e. returned zero. */
int
-gen_shl_and (dest, left_rtx, mask_rtx, source)
- rtx dest, left_rtx, mask_rtx, source;
+gen_shl_and (rtx dest, rtx left_rtx, rtx mask_rtx, rtx source)
{
int attributes[3];
unsigned HOST_WIDE_INT mask;
int kind = shl_and_kind (left_rtx, mask_rtx, attributes);
int right, total_shift;
- void (*shift_gen_fun) PARAMS ((int, rtx*)) = gen_shifty_hi_op;
+ void (*shift_gen_fun) (int, rtx *) = gen_shifty_hi_op;
right = attributes[0];
total_shift = INTVAL (left_rtx) + right;
if (first < 0)
{
emit_insn ((mask << right) <= 0xff
- ? gen_zero_extendqisi2(dest,
- gen_lowpart (QImode, source))
- : gen_zero_extendhisi2(dest,
- gen_lowpart (HImode, source)));
+ ? gen_zero_extendqisi2 (dest,
+ gen_lowpart (QImode, source))
+ : gen_zero_extendhisi2 (dest,
+ gen_lowpart (HImode, source)));
source = dest;
}
if (source != dest)
}
if (first >= 0)
emit_insn (mask <= 0xff
- ? gen_zero_extendqisi2(dest, gen_lowpart (QImode, dest))
- : gen_zero_extendhisi2(dest, gen_lowpart (HImode, dest)));
+ ? gen_zero_extendqisi2 (dest, gen_lowpart (QImode, dest))
+ : gen_zero_extendhisi2 (dest, gen_lowpart (HImode, dest)));
if (total_shift > 0)
{
operands[2] = GEN_INT (total_shift);
/* If the topmost bit that matters is set, set the topmost bits
that don't matter. This way, we might be able to get a shorter
signed constant. */
- if (mask & ((HOST_WIDE_INT)1 << (31 - total_shift)))
- mask |= (HOST_WIDE_INT)~0 << (31 - total_shift);
+ if (mask & ((HOST_WIDE_INT) 1 << (31 - total_shift)))
+ mask |= (HOST_WIDE_INT) ~0 << (31 - total_shift);
case 2:
/* Don't expand fine-grained when combining, because that will
make the pattern fail. */
If COSTP is nonzero, assign the calculated cost to *COSTP. */
int
-shl_sext_kind (left_rtx, size_rtx, costp)
- rtx left_rtx, size_rtx;
- int *costp;
+shl_sext_kind (rtx left_rtx, rtx size_rtx, int *costp)
{
int left, size, insize, ext;
int cost = 0, best_cost;
implementing this pattern. */
int
-shl_sext_length (insn)
- rtx insn;
+shl_sext_length (rtx insn)
{
rtx set_src, left_rtx, size_rtx;
int cost;
/* Generate rtl for this pattern */
int
-gen_shl_sext (dest, left_rtx, size_rtx, source)
- rtx dest, left_rtx, size_rtx, source;
+gen_shl_sext (rtx dest, rtx left_rtx, rtx size_rtx, rtx source)
{
int kind;
int left, size, insize, cost;
gen_shifty_hi_op (ASHIFT, operands);
}
emit_insn (kind & 1
- ? gen_extendqisi2(dest, gen_lowpart (QImode, dest))
- : gen_extendhisi2(dest, gen_lowpart (HImode, dest)));
+ ? gen_extendqisi2 (dest, gen_lowpart (QImode, dest))
+ : gen_extendhisi2 (dest, gen_lowpart (HImode, dest)));
if (kind <= 2)
{
if (shift2)
{
operands[2] = GEN_INT (shift2 + 1);
gen_shifty_op (ASHIFT, operands);
- operands[2] = GEN_INT (1);
+ operands[2] = const1_rtx;
gen_shifty_op (ASHIFTRT, operands);
break;
}
operands[2] = kind == 7 ? GEN_INT (left + 1) : left_rtx;
gen_shifty_op (ASHIFT, operands);
if (kind == 7)
- emit_insn (gen_ashrsi3_k (dest, dest, GEN_INT (1)));
+ emit_insn (gen_ashrsi3_k (dest, dest, const1_rtx));
break;
default:
return -1;
/* Prefix a symbol_ref name with "datalabel". */
rtx
-gen_datalabel_ref (sym)
- rtx sym;
+gen_datalabel_ref (rtx sym)
{
if (GET_CODE (sym) == LABEL_REF)
return gen_rtx_CONST (GET_MODE (sym),
/* Add a constant to the pool and return its label. */
static rtx
-add_constant (x, mode, last_value)
- rtx x;
- enum machine_mode mode;
- rtx last_value;
+add_constant (rtx x, enum machine_mode mode, rtx last_value)
{
int i;
rtx lab, new, ref, newref;
/* Output the literal table. */
static void
-dump_table (scan)
- rtx scan;
+dump_table (rtx scan)
{
int i;
int need_align = 1;
{
lab = XEXP (ref, 0);
emit_insn_before (gen_consttable_window_end (lab),
- align_insn);
+ align_insn);
}
delete_insn (align_insn);
align_insn = NULL_RTX;
mov.w instead of a mov.l. */
static int
-hi_const (src)
- rtx src;
+hi_const (rtx src)
{
return (GET_CODE (src) == CONST_INT
&& INTVAL (src) >= -32768
/* Nonzero if the insn is a move instruction which needs to be fixed. */
/* ??? For a DImode/DFmode moves, we don't need to fix it if each half of the
- CONST_DOUBLE input value is CONST_OK_FOR_I. For a SFmode move, we don't
- need to fix it if the input value is CONST_OK_FOR_I. */
+ CONST_DOUBLE input value is CONST_OK_FOR_I08. For a SFmode move, we don't
+ need to fix it if the input value is CONST_OK_FOR_I08. */
static int
-broken_move (insn)
- rtx insn;
+broken_move (rtx insn)
{
if (GET_CODE (insn) == INSN)
{
&& GET_CODE (SET_DEST (pat)) == REG
&& FP_REGISTER_P (REGNO (SET_DEST (pat))))
&& (GET_CODE (SET_SRC (pat)) != CONST_INT
- || ! CONST_OK_FOR_I (INTVAL (SET_SRC (pat)))))
+ || ! CONST_OK_FOR_I08 (INTVAL (SET_SRC (pat)))))
return 1;
}
}
static int
-mova_p (insn)
- rtx insn;
+mova_p (rtx insn)
{
return (GET_CODE (insn) == INSN
&& GET_CODE (PATTERN (insn)) == SET
the range. */
static rtx
-find_barrier (num_mova, mova, from)
- int num_mova;
- rtx mova, from;
+find_barrier (int num_mova, rtx mova, rtx from)
{
int count_si = 0;
int count_hi = 0;
the limit is the same, but the alignment requirements
are higher. We may waste up to 4 additional bytes
for alignment, and the DF/DI constant may have
- another SF/SI constant placed before it. */
+ another SF/SI constant placed before it. */
if (TARGET_SHCOMPACT
&& ! found_di
&& (mode == DFmode || mode == DImode))
register is not used anywhere else in this instruction - except as the
destination of a set, return this register; else, return 0. */
rtx
-sfunc_uses_reg (insn)
- rtx insn;
+sfunc_uses_reg (rtx insn)
{
int i;
rtx pattern, part, reg_part, reg;
is set by INSN. */
static int
-noncall_uses_reg (reg, insn, set)
- rtx reg;
- rtx insn;
- rtx *set;
+noncall_uses_reg (rtx reg, rtx insn, rtx *set)
{
rtx pattern, reg2;
registers 0..15, respectively, are used as outputs, or are clobbered.
IS_DEST should be set to 16 if X is the destination of a SET, else to 0. */
int
-regs_used (x, is_dest)
- rtx x; int is_dest;
+regs_used (rtx x, int is_dest)
{
enum rtx_code code;
const char *fmt;
If a blocking instruction is made or recognized, return it. */
static rtx
-gen_block_redirect (jump, addr, need_block)
- rtx jump;
- int addr, need_block;
+gen_block_redirect (rtx jump, int addr, int need_block)
{
int dead = 0;
rtx prev = prev_nonnote_insn (jump);
else if (recog_memoized (prev) == CODE_FOR_block_branch_redirect)
need_block = 0;
}
+ if (GET_CODE (PATTERN (jump)) == RETURN)
+ {
+ if (! need_block)
+ return prev;
+ /* Reorg even does nasty things with return insns that cause branches
+ to go out of range - see find_end_label and callers. */
+ return emit_insn_before (gen_block_branch_redirect (const0_rtx) , jump);
+ }
/* We can't use JUMP_LABEL here because it might be undefined
when not optimizing. */
dest = XEXP (SET_SRC (PATTERN (jump)), 0);
if (INSN_DELETED_P (scan))
continue;
code = GET_CODE (scan);
- if (GET_RTX_CLASS (code) == 'i')
+ if (INSN_P (scan))
{
used |= regs_used (PATTERN (scan), 0);
if (code == CALL_INSN)
int address;
};
-static void gen_far_branch PARAMS ((struct far_branch *));
+static void gen_far_branch (struct far_branch *);
enum mdep_reorg_phase_e mdep_reorg_phase;
static void
-gen_far_branch (bp)
- struct far_branch *bp;
+gen_far_branch (struct far_branch *bp)
{
rtx insn = bp->insert_place;
rtx jump;
jump = emit_jump_insn_after (gen_return (), insn);
/* Emit a barrier so that reorg knows that any following instructions
are not reachable via a fall-through path.
- But don't do this when not optimizing, since we wouldn't supress the
+ But don't do this when not optimizing, since we wouldn't suppress the
alignment for the barrier then, and could end up with out-of-range
pc-relative loads. */
if (optimize)
JUMP_LABEL (jump) = bp->far_label;
if (! invert_jump (insn, label, 1))
abort ();
- (emit_insn_after
- (gen_stuff_delay_slot
- (GEN_INT (INSN_UID (XEXP (SET_SRC (PATTERN (jump)), 0))),
- GEN_INT (recog_memoized (insn) == CODE_FOR_branch_false)),
- insn));
+ /* If we are branching around a jump (rather than a return), prevent
+ reorg from using an insn from the jump target as the delay slot insn -
+ when reorg did this, it pessimized code (we rather hide the delay slot)
+ and it could cause branches to go out of range. */
+ if (bp->far_label)
+ (emit_insn_after
+ (gen_stuff_delay_slot
+ (GEN_INT (INSN_UID (XEXP (SET_SRC (PATTERN (jump)), 0))),
+ GEN_INT (recog_memoized (insn) == CODE_FOR_branch_false)),
+ insn));
/* Prevent reorg from undoing our splits. */
gen_block_redirect (jump, bp->address += 2, 2);
}
/* Fix up ADDR_DIFF_VECs. */
void
-fixup_addr_diff_vecs (first)
- rtx first;
+fixup_addr_diff_vecs (rtx first)
{
rtx insn;
/* BARRIER_OR_LABEL is either a BARRIER or a CODE_LABEL immediately following
a barrier. Return the base 2 logarithm of the desired alignment. */
int
-barrier_align (barrier_or_label)
- rtx barrier_or_label;
+barrier_align (rtx barrier_or_label)
{
rtx next = next_real_insn (barrier_or_label), pat, prev;
int slot, credit, jump_to_next = 0;
the table to the minimum for proper code alignment. */
return ((TARGET_SMALLCODE
|| ((unsigned) XVECLEN (pat, 1) * GET_MODE_SIZE (GET_MODE (pat))
- <= (unsigned)1 << (CACHE_LOG - 2)))
+ <= (unsigned) 1 << (CACHE_LOG - 2)))
? 1 << TARGET_SHMEDIA : align_jumps_log);
}
Applying loop alignment to small constant or switch tables is a waste
of space, so we suppress this too. */
int
-sh_loop_align (label)
- rtx label;
+sh_loop_align (rtx label)
{
rtx next = label;
scheduling. */
static void
-sh_reorg ()
+sh_reorg (void)
{
rtx first, insn, mova = NULL_RTX;
int num_mova;
if (GET_CODE (dst) == REG && FP_ANY_REGISTER_P (REGNO (dst)))
{
/* This must be an insn that clobbers r0. */
- rtx clobber = XVECEXP (PATTERN (scan), 0,
- XVECLEN (PATTERN (scan), 0) - 1);
+ rtx *clobberp = &XVECEXP (PATTERN (scan), 0,
+ XVECLEN (PATTERN (scan), 0)
+ - 1);
+ rtx clobber = *clobberp;
if (GET_CODE (clobber) != CLOBBER
|| ! rtx_equal_p (XEXP (clobber, 0), r0_rtx))
}
last_float_move = scan;
last_float = src;
- newsrc = gen_rtx (MEM, mode,
+ newsrc = gen_rtx_MEM (mode,
(((TARGET_SH4 && ! TARGET_FMOVD)
|| REGNO (dst) == FPUL_REG)
? r0_inc_rtx
last_float_addr = &XEXP (newsrc, 0);
/* Remove the clobber of r0. */
- XEXP (clobber, 0) = gen_rtx_SCRATCH (Pmode);
+ *clobberp = gen_rtx_CLOBBER (GET_MODE (clobber),
+ gen_rtx_SCRATCH (Pmode));
RTX_UNCHANGING_P (newsrc) = 1;
}
/* This is a mova needing a label. Create it. */
}
int
-get_dest_uid (label, max_uid)
- rtx label;
- int max_uid;
+get_dest_uid (rtx label, int max_uid)
{
rtx dest = next_real_insn (label);
int dest_uid;
find branches with common targets more easily. */
static void
-split_branches (first)
- rtx first;
+split_branches (rtx first)
{
rtx insn;
struct far_branch **uid_branch, *far_branch_list = 0;
does not bother to update them. */
void
-final_prescan_insn (insn, opvec, noperands)
- rtx insn;
- rtx *opvec ATTRIBUTE_UNUSED;
- int noperands ATTRIBUTE_UNUSED;
+final_prescan_insn (rtx insn, rtx *opvec ATTRIBUTE_UNUSED,
+ int noperands ATTRIBUTE_UNUSED)
{
if (TARGET_DUMPISIZE)
fprintf (asm_out_file, "\n! at %04x\n", INSN_ADDRESSES (INSN_UID (insn)));
only be labels. */
const char *
-output_jump_label_table ()
+output_jump_label_table (void)
{
int i;
static int extra_push;
-/* Adjust the stack by SIZE bytes. REG holds the rtl of the register
- to be adjusted, and TEMP, if nonnegative, holds the register number
- of a general register that we may clobber. */
+/* Adjust the stack by SIZE bytes. REG holds the rtl of the register to be
+ adjusted. If epilogue_p is zero, this is for a prologue; otherwise, it's
+ for an epilogue. If LIVE_REGS_MASK is nonzero, it points to a HARD_REG_SET
+ of all the registers that are about to be restored, and hence dead. */
static void
-output_stack_adjust (size, reg, temp, emit_fn)
- int size;
- rtx reg;
- int temp;
- rtx (*emit_fn) PARAMS ((rtx));
+output_stack_adjust (int size, rtx reg, int epilogue_p,
+ HARD_REG_SET *live_regs_mask)
{
+ rtx (*emit_fn) (rtx) = epilogue_p ? &emit_insn : &frame_insn;
if (size)
{
HOST_WIDE_INT align = STACK_BOUNDARY / BITS_PER_UNIT;
{
rtx const_reg;
rtx insn;
+ int temp = epilogue_p ? 7 : (TARGET_SH5 ? 0 : 1);
+ int i;
/* If TEMP is invalid, we could temporarily save a general
register to MACL. However, there is currently no need
to handle this case, so just abort when we see it. */
+ if (current_function_interrupt
+ || ! call_used_regs[temp] || fixed_regs[temp])
+ temp = -1;
+ if (temp < 0 && ! current_function_interrupt)
+ {
+ HARD_REG_SET temps;
+ COPY_HARD_REG_SET (temps, call_used_reg_set);
+ AND_COMPL_HARD_REG_SET (temps, call_fixed_reg_set);
+ if (epilogue_p)
+ {
+ for (i = 0; i < HARD_REGNO_NREGS (FIRST_RET_REG, DImode); i++)
+ CLEAR_HARD_REG_BIT (temps, FIRST_RET_REG + i);
+ if (current_function_calls_eh_return)
+ {
+ CLEAR_HARD_REG_BIT (temps, EH_RETURN_STACKADJ_REGNO);
+ for (i = 0; i <= 3; i++)
+ CLEAR_HARD_REG_BIT (temps, EH_RETURN_DATA_REGNO (i));
+ }
+ }
+ else
+ {
+ for (i = FIRST_PARM_REG;
+ i < FIRST_PARM_REG + NPARM_REGS (SImode); i++)
+ CLEAR_HARD_REG_BIT (temps, i);
+ if (current_function_needs_context)
+ CLEAR_HARD_REG_BIT (temps, STATIC_CHAIN_REGNUM);
+ }
+ temp = scavenge_reg (&temps);
+ }
+ if (temp < 0 && live_regs_mask)
+ temp = scavenge_reg (live_regs_mask);
if (temp < 0)
abort ();
const_reg = gen_rtx_REG (GET_MODE (reg), temp);
emit_insn (GEN_MOV (const_reg, GEN_INT (size)));
insn = emit_fn (GEN_ADD3 (reg, reg, const_reg));
}
- if (emit_fn == frame_insn)
+ if (! epilogue_p)
REG_NOTES (insn)
= (gen_rtx_EXPR_LIST
(REG_FRAME_RELATED_EXPR,
}
static rtx
-frame_insn (x)
- rtx x;
+frame_insn (rtx x)
{
x = emit_insn (x);
RTX_FRAME_RELATED_P (x) = 1;
/* Output RTL to push register RN onto the stack. */
static rtx
-push (rn)
- int rn;
+push (int rn)
{
rtx x;
if (rn == FPUL_REG)
/* Output RTL to pop register RN from the stack. */
static void
-pop (rn)
- int rn;
+pop (int rn)
{
rtx x;
if (rn == FPUL_REG)
/* Generate code to push the regs specified in the mask. */
static void
-push_regs (mask, interrupt_handler)
- HARD_REG_SET *mask;
- int interrupt_handler;
+push_regs (HARD_REG_SET *mask, int interrupt_handler)
{
int i;
int skip_fpscr = 0;
HARD_REG_SET unsaved;
push (FPSCR_REG);
- COMPL_HARD_REG_SET(unsaved, *mask);
+ COMPL_HARD_REG_SET (unsaved, *mask);
fpscr_set_from_mem (NORMAL_MODE (FP_MODE), unsaved);
skip_fpscr = 1;
}
push (PR_REG);
}
+/* Calculate how much extra space is needed to save all callee-saved
+ target registers.
+ LIVE_REGS_MASK is the register mask calculated by calc_live_regs. */
+
+static int
+shmedia_target_regs_stack_space (HARD_REG_SET *live_regs_mask)
+{
+ int reg;
+ int stack_space = 0;
+ int interrupt_handler = sh_cfun_interrupt_handler_p ();
+
+ for (reg = LAST_TARGET_REG; reg >= FIRST_TARGET_REG; reg--)
+ if ((! call_used_regs[reg] || interrupt_handler)
+ && ! TEST_HARD_REG_BIT (*live_regs_mask, reg))
+ /* Leave space to save this target register on the stack,
+ in case target register allocation wants to use it. */
+ stack_space += GET_MODE_SIZE (REGISTER_NATURAL_MODE (reg));
+ return stack_space;
+}
+
+/* Decide whether we should reserve space for callee-save target registers,
+ in case target register allocation wants to use them. REGS_SAVED is
+ the space, in bytes, that is already required for register saves.
+ LIVE_REGS_MASK is the register mask calculated by calc_live_regs. */
+
+static int
+shmedia_reserve_space_for_target_registers_p (int regs_saved,
+ HARD_REG_SET *live_regs_mask)
+{
+ if (optimize_size)
+ return 0;
+ return shmedia_target_regs_stack_space (live_regs_mask) <= regs_saved;
+}
+
+/* Decide how much space to reserve for callee-save target registers
+ in case target register allocation wants to use them.
+ LIVE_REGS_MASK is the register mask calculated by calc_live_regs. */
+
+static int
+shmedia_target_regs_stack_adjust (HARD_REG_SET *live_regs_mask)
+{
+ if (shmedia_space_reserved_for_target_registers)
+ return shmedia_target_regs_stack_space (live_regs_mask);
+ else
+ return 0;
+}
+
/* Work out the registers which need to be saved, both as a mask and a
count of saved words. Return the count.
make sure that all the regs it clobbers are safe too. */
static int
-calc_live_regs (live_regs_mask)
- HARD_REG_SET *live_regs_mask;
+calc_live_regs (HARD_REG_SET *live_regs_mask)
{
int reg;
int count;
int interrupt_handler;
- int pr_live;
+ int pr_live, has_call;
interrupt_handler = sh_cfun_interrupt_handler_p ();
- for (count = 0; 32 * count < FIRST_PSEUDO_REGISTER; count++)
- CLEAR_HARD_REG_SET (*live_regs_mask);
+ CLEAR_HARD_REG_SET (*live_regs_mask);
if (TARGET_SH4 && TARGET_FMOVD && interrupt_handler
&& regs_ever_live[FPSCR_REG])
target_flags &= ~FPU_SINGLE_BIT;
the initial value can become the PR_MEDIA_REG hard register, as seen for
execute/20010122-1.c:test9. */
if (TARGET_SHMEDIA)
- pr_live = regs_ever_live[PR_MEDIA_REG];
+ /* ??? this function is called from initial_elimination_offset, hence we
+ can't use the result of sh_media_register_for_return here. */
+ pr_live = sh_pr_n_sets ();
else
{
rtx pr_initial = has_hard_reg_initial_val (Pmode, PR_REG);
? (GET_CODE (pr_initial) != REG
|| REGNO (pr_initial) != (PR_REG))
: regs_ever_live[PR_REG]);
+ /* For Shcompact, if not optimizing, we end up with a memory reference
+ using the return address pointer for __builtin_return_address even
+ though there is no actual need to put the PR register on the stack. */
+ pr_live |= regs_ever_live[RETURN_ADDRESS_POINTER_REGNUM];
}
/* Force PR to be live if the prologue has to call the SHmedia
argument decoder or register saver. */
& ~ CALL_COOKIE_RET_TRAMP (1))
|| current_function_has_nonlocal_label))
pr_live = 1;
+ has_call = TARGET_SHMEDIA ? ! leaf_function_p () : pr_live;
for (count = 0, reg = FIRST_PSEUDO_REGISTER - 1; reg >= 0; reg--)
{
if (reg == (TARGET_SHMEDIA ? PR_MEDIA_REG : PR_REG)
(regs_ever_live[reg]
|| (call_used_regs[reg]
&& (! fixed_regs[reg] || reg == MACH_REG || reg == MACL_REG)
- && pr_live))
+ && has_call)
+ || (has_call && REGISTER_NATURAL_MODE (reg) == SImode
+ && (GENERAL_REGISTER_P (reg) || TARGET_REGISTER_P (reg))))
&& reg != STACK_POINTER_REGNUM && reg != ARG_POINTER_REGNUM
&& reg != RETURN_ADDRESS_POINTER_REGNUM
&& reg != T_REG && reg != GBR_REG
(TARGET_SHCOMPACT
&& flag_pic
&& current_function_args_info.call_cookie
- && reg == PIC_OFFSET_TABLE_REGNUM)
+ && reg == (int) PIC_OFFSET_TABLE_REGNUM)
|| (regs_ever_live[reg] && ! call_used_regs[reg])
|| (current_function_calls_eh_return
- && (reg == EH_RETURN_DATA_REGNO (0)
- || reg == EH_RETURN_DATA_REGNO (1)
- || reg == EH_RETURN_DATA_REGNO (2)
- || reg == EH_RETURN_DATA_REGNO (3)))))
+ && (reg == (int) EH_RETURN_DATA_REGNO (0)
+ || reg == (int) EH_RETURN_DATA_REGNO (1)
+ || reg == (int) EH_RETURN_DATA_REGNO (2)
+ || reg == (int) EH_RETURN_DATA_REGNO (3)))
+ || ((reg == MACL_REG || reg == MACH_REG)
+ && regs_ever_live[reg]
+ && sh_cfun_attr_renesas_p ())
+ ))
{
SET_HARD_REG_BIT (*live_regs_mask, reg);
count += GET_MODE_SIZE (REGISTER_NATURAL_MODE (reg));
}
}
}
+ /* If we have a target register optimization pass after prologue / epilogue
+ threading, we need to assume all target registers will be live even if
+ they aren't now. */
+ if (flag_branch_target_load_optimize2
+ && TARGET_SAVE_ALL_TARGET_REGS
+ && shmedia_space_reserved_for_target_registers)
+ for (reg = LAST_TARGET_REG; reg >= FIRST_TARGET_REG; reg--)
+ if ((! call_used_regs[reg] || interrupt_handler)
+ && ! TEST_HARD_REG_BIT (*live_regs_mask, reg))
+ {
+ SET_HARD_REG_BIT (*live_regs_mask, reg);
+ count += GET_MODE_SIZE (REGISTER_NATURAL_MODE (reg));
+ }
+ /* If this is an interrupt handler, we don't have any call-clobbered
+ registers we can conveniently use for target register save/restore.
+ Make sure we save at least one general purpose register when we need
+ to save target registers. */
+ if (interrupt_handler
+ && hard_regs_intersect_p (live_regs_mask,
+ ®_class_contents[TARGET_REGS])
+ && ! hard_regs_intersect_p (live_regs_mask,
+ ®_class_contents[GENERAL_REGS]))
+ {
+ SET_HARD_REG_BIT (*live_regs_mask, R0_REG);
+ count += GET_MODE_SIZE (REGISTER_NATURAL_MODE (R0_REG));
+ }
return count;
}
stack for register saves. Return the frame size, padded
appropriately so that the stack stays properly aligned. */
static HOST_WIDE_INT
-rounded_frame_size (pushed)
- int pushed;
+rounded_frame_size (int pushed)
{
HOST_WIDE_INT size = get_frame_size ();
HOST_WIDE_INT align = STACK_BOUNDARY / BITS_PER_UNIT;
unchanged along the whole function. We set it up as the return
value in the prologue. */
int
-sh_media_register_for_return ()
+sh_media_register_for_return (void)
{
int regno;
int tr0_used;
if (! current_function_is_leaf)
return -1;
+ if (lookup_attribute ("interrupt_handler",
+ DECL_ATTRIBUTES (current_function_decl)))
+ return -1;
tr0_used = flag_pic && regs_ever_live[PIC_OFFSET_TABLE_REGNUM];
return -1;
}
+/* The maximum registers we need to save are:
+ - 62 general purpose registers (r15 is stack pointer, r63 is zero)
+ - 32 floating point registers (for each pair, we save none,
+ one single precision value, or a double precision value).
+ - 8 target registers
+ - add 1 entry for a delimiter. */
+#define MAX_SAVED_REGS (62+32+8)
+
+typedef struct save_entry_s
+{
+ unsigned char reg;
+ unsigned char mode;
+ short offset;
+} save_entry;
+
+#define MAX_TEMPS 4
+
+/* There will be a delimiter entry with VOIDmode both at the start and the
+ end of a filled in schedule. The end delimiter has the offset of the
+ save with the smallest (i.e. most negative) offset. */
+typedef struct save_schedule_s
+{
+ save_entry entries[MAX_SAVED_REGS + 2];
+ int temps[MAX_TEMPS+1];
+} save_schedule;
+
+/* Fill in SCHEDULE according to LIVE_REGS_MASK. If RESTORE is nonzero,
+ use reverse order. Returns the last entry written to (not counting
+ the delimiter). OFFSET_BASE is a number to be added to all offset
+ entries. */
+
+static save_entry *
+sh5_schedule_saves (HARD_REG_SET *live_regs_mask, save_schedule *schedule,
+ int offset_base)
+{
+ int align, i;
+ save_entry *entry = schedule->entries;
+ int tmpx = 0;
+ int offset;
+
+ if (! current_function_interrupt)
+ for (i = FIRST_GENERAL_REG; tmpx < MAX_TEMPS && i <= LAST_GENERAL_REG; i++)
+ if (call_used_regs[i] && ! fixed_regs[i] && i != PR_MEDIA_REG
+ && ! FUNCTION_ARG_REGNO_P (i)
+ && i != FIRST_RET_REG
+ && ! (current_function_needs_context && i == STATIC_CHAIN_REGNUM)
+ && ! (current_function_calls_eh_return
+ && (i == EH_RETURN_STACKADJ_REGNO
+ || ((unsigned) i <= EH_RETURN_DATA_REGNO (0)
+ && (unsigned) i >= EH_RETURN_DATA_REGNO (3)))))
+ schedule->temps[tmpx++] = i;
+ entry->reg = -1;
+ entry->mode = VOIDmode;
+ entry->offset = offset_base;
+ entry++;
+ /* We loop twice: first, we save 8-byte aligned registers in the
+ higher addresses, that are known to be aligned. Then, we
+ proceed to saving 32-bit registers that don't need 8-byte
+ alignment.
+ If this is an interrupt function, all registers that need saving
+ need to be saved in full. moreover, we need to postpone saving
+ target registers till we have saved some general purpose registers
+ we can then use as scratch registers. */
+ offset = offset_base;
+ for (align = 1; align >= 0; align--)
+ {
+ for (i = FIRST_PSEUDO_REGISTER - 1; i >= 0; i--)
+ if (TEST_HARD_REG_BIT (*live_regs_mask, i))
+ {
+ enum machine_mode mode = REGISTER_NATURAL_MODE (i);
+ int reg = i;
+
+ if (current_function_interrupt)
+ {
+ if (TARGET_REGISTER_P (i))
+ continue;
+ if (GENERAL_REGISTER_P (i))
+ mode = DImode;
+ }
+ if (mode == SFmode && (i % 2) == 1
+ && ! TARGET_FPU_SINGLE && FP_REGISTER_P (i)
+ && (TEST_HARD_REG_BIT (*live_regs_mask, (i ^ 1))))
+ {
+ mode = DFmode;
+ i--;
+ reg--;
+ }
+
+ /* If we're doing the aligned pass and this is not aligned,
+ or we're doing the unaligned pass and this is aligned,
+ skip it. */
+ if ((GET_MODE_SIZE (mode) % (STACK_BOUNDARY / BITS_PER_UNIT) == 0)
+ != align)
+ continue;
+
+ if (current_function_interrupt
+ && GENERAL_REGISTER_P (i)
+ && tmpx < MAX_TEMPS)
+ schedule->temps[tmpx++] = i;
+
+ offset -= GET_MODE_SIZE (mode);
+ entry->reg = i;
+ entry->mode = mode;
+ entry->offset = offset;
+ entry++;
+ }
+ if (align && current_function_interrupt)
+ for (i = LAST_TARGET_REG; i >= FIRST_TARGET_REG; i--)
+ if (TEST_HARD_REG_BIT (*live_regs_mask, i))
+ {
+ offset -= GET_MODE_SIZE (DImode);
+ entry->reg = i;
+ entry->mode = DImode;
+ entry->offset = offset;
+ entry++;
+ }
+ }
+ entry->reg = -1;
+ entry->mode = VOIDmode;
+ entry->offset = offset;
+ schedule->temps[tmpx] = -1;
+ return entry - 1;
+}
+
void
-sh_expand_prologue ()
+sh_expand_prologue (void)
{
HARD_REG_SET live_regs_mask;
int d, i;
and partially on the stack, e.g. a large structure. */
output_stack_adjust (-current_function_pretend_args_size
- current_function_args_info.stack_regs * 8,
- stack_pointer_rtx, TARGET_SH5 ? 0 : 1, frame_insn);
+ stack_pointer_rtx, 0, NULL);
extra_push = 0;
rtx insn = emit_move_insn (gen_rtx_REG (DImode, tr),
gen_rtx_REG (DImode, PR_MEDIA_REG));
+ /* ??? We should suppress saving pr when we don't need it, but this
+ is tricky because of builtin_return_address. */
+
/* If this function only exits with sibcalls, this copy
will be flagged as dead. */
REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_MAYBE_DEAD,
if (current_function_stdarg)
{
/* This is not used by the SH2E calling convention */
- if (TARGET_SH1 && ! TARGET_SH2E && ! TARGET_SH5 && ! TARGET_HITACHI)
+ if (TARGET_SH1 && ! TARGET_SH2E && ! TARGET_SH5
+ && ! (TARGET_HITACHI || sh_cfun_attr_renesas_p ()))
{
/* Push arg regs as if they'd been provided by caller in stack. */
for (i = 0; i < NPARM_REGS(SImode); i++)
if (TARGET_SH5)
{
- int i;
- int offset;
- int align;
- rtx r0 = gen_rtx_REG (Pmode, R0_REG);
+ int offset_base, offset;
+ rtx r0 = NULL_RTX;
int offset_in_r0 = -1;
int sp_in_r0 = 0;
-
- if (d % (STACK_BOUNDARY / BITS_PER_UNIT))
+ int tregs_space = shmedia_target_regs_stack_adjust (&live_regs_mask);
+ int total_size, save_size;
+ save_schedule schedule;
+ save_entry *entry;
+ int *tmp_pnt;
+
+ if (call_used_regs[R0_REG] && ! fixed_regs[R0_REG]
+ && ! current_function_interrupt)
+ r0 = gen_rtx_REG (Pmode, R0_REG);
+
+ /* D is the actual number of bytes that we need for saving registers,
+ however, in initial_elimination_offset we have committed to using
+ an additional TREGS_SPACE amount of bytes - in order to keep both
+ addresses to arguments supplied by the caller and local variables
+ valid, we must keep this gap. Place it between the incoming
+ arguments and the actually saved registers in a bid to optimize
+ locality of reference. */
+ total_size = d + tregs_space;
+ total_size += rounded_frame_size (total_size);
+ save_size = total_size - rounded_frame_size (d);
+ if (save_size % (STACK_BOUNDARY / BITS_PER_UNIT))
d_rounding = ((STACK_BOUNDARY / BITS_PER_UNIT)
- - d % (STACK_BOUNDARY / BITS_PER_UNIT));
-
- offset = d + d_rounding;
- output_stack_adjust (-offset, stack_pointer_rtx, 1, frame_insn);
-
- /* We loop twice: first, we save 8-byte aligned registers in the
- higher addresses, that are known to be aligned. Then, we
- proceed to saving 32-bit registers that don't need 8-byte
- alignment. */
- /* Note that if you change this code in a way that affects where
- the return register is saved, you have to update not only
- sh_expand_epilogue, but also sh_set_return_address. */
- for (align = 1; align >= 0; align--)
- for (i = FIRST_PSEUDO_REGISTER - 1; i >= 0; i--)
- if (TEST_HARD_REG_BIT (live_regs_mask, i))
- {
- enum machine_mode mode = REGISTER_NATURAL_MODE (i);
- int reg = i;
- rtx reg_rtx, mem_rtx, pre_dec = NULL_RTX;
-
- if (mode == SFmode && (i % 2) == 1
- && ! TARGET_FPU_SINGLE && FP_REGISTER_P (i)
- && (TEST_HARD_REG_BIT (live_regs_mask, (i ^ 1))))
- {
- mode = DFmode;
- i--;
- reg--;
- }
-
- /* If we're doing the aligned pass and this is not aligned,
- or we're doing the unaligned pass and this is aligned,
- skip it. */
- if ((GET_MODE_SIZE (mode) % (STACK_BOUNDARY / BITS_PER_UNIT)
- == 0) != align)
- continue;
+ - save_size % (STACK_BOUNDARY / BITS_PER_UNIT));
+
+ /* If adjusting the stack in a single step costs nothing extra, do so.
+ I.e. either if a single addi is enough, or we need a movi anyway,
+ and we don't exceed the maximum offset range (the test for the
+ latter is conservative for simplicity). */
+ if (TARGET_SHMEDIA
+ && (CONST_OK_FOR_I10 (-total_size)
+ || (! CONST_OK_FOR_I10 (-(save_size + d_rounding))
+ && total_size <= 2044)))
+ d_rounding = total_size - save_size;
+
+ offset_base = d + d_rounding;
+
+ output_stack_adjust (-(save_size + d_rounding), stack_pointer_rtx,
+ 0, NULL);
+
+ sh5_schedule_saves (&live_regs_mask, &schedule, offset_base);
+ tmp_pnt = schedule.temps;
+ for (entry = &schedule.entries[1]; entry->mode != VOIDmode; entry++)
+ {
+ enum machine_mode mode = entry->mode;
+ int reg = entry->reg;
+ rtx reg_rtx, mem_rtx, pre_dec = NULL_RTX;
- offset -= GET_MODE_SIZE (mode);
+ offset = entry->offset;
- reg_rtx = gen_rtx_REG (mode, reg);
+ reg_rtx = gen_rtx_REG (mode, reg);
- mem_rtx = gen_rtx_MEM (mode,
- gen_rtx_PLUS (Pmode,
- stack_pointer_rtx,
- GEN_INT (offset)));
+ mem_rtx = gen_rtx_MEM (mode,
+ gen_rtx_PLUS (Pmode,
+ stack_pointer_rtx,
+ GEN_INT (offset)));
- GO_IF_LEGITIMATE_ADDRESS (mode, XEXP (mem_rtx, 0), try_pre_dec);
+ GO_IF_LEGITIMATE_ADDRESS (mode, XEXP (mem_rtx, 0), try_pre_dec);
- mem_rtx = NULL_RTX;
+ if (! r0)
+ abort ();
+ mem_rtx = NULL_RTX;
- try_pre_dec:
- do
- if (HAVE_PRE_DECREMENT
- && (offset_in_r0 - offset == GET_MODE_SIZE (mode)
- || mem_rtx == NULL_RTX
- || i == PR_REG || SPECIAL_REGISTER_P (i)))
- {
- pre_dec = gen_rtx_MEM (mode,
- gen_rtx_PRE_DEC (Pmode, r0));
+ try_pre_dec:
+ do
+ if (HAVE_PRE_DECREMENT
+ && (offset_in_r0 - offset == GET_MODE_SIZE (mode)
+ || mem_rtx == NULL_RTX
+ || reg == PR_REG || SPECIAL_REGISTER_P (reg)))
+ {
+ pre_dec = gen_rtx_MEM (mode,
+ gen_rtx_PRE_DEC (Pmode, r0));
- GO_IF_LEGITIMATE_ADDRESS (mode, XEXP (pre_dec, 0),
- pre_dec_ok);
+ GO_IF_LEGITIMATE_ADDRESS (mode, XEXP (pre_dec, 0),
+ pre_dec_ok);
- pre_dec = NULL_RTX;
+ pre_dec = NULL_RTX;
- break;
+ break;
- pre_dec_ok:
- mem_rtx = NULL_RTX;
- offset += GET_MODE_SIZE (mode);
- }
- while (0);
+ pre_dec_ok:
+ mem_rtx = NULL_RTX;
+ offset += GET_MODE_SIZE (mode);
+ }
+ while (0);
- if (mem_rtx != NULL_RTX)
- goto addr_ok;
+ if (mem_rtx != NULL_RTX)
+ goto addr_ok;
- if (offset_in_r0 == -1)
- {
- emit_move_insn (r0, GEN_INT (offset));
- offset_in_r0 = offset;
- }
- else if (offset != offset_in_r0)
+ if (offset_in_r0 == -1)
+ {
+ emit_move_insn (r0, GEN_INT (offset));
+ offset_in_r0 = offset;
+ }
+ else if (offset != offset_in_r0)
+ {
+ emit_move_insn (r0,
+ gen_rtx_PLUS
+ (Pmode, r0,
+ GEN_INT (offset - offset_in_r0)));
+ offset_in_r0 += offset - offset_in_r0;
+ }
+
+ if (pre_dec != NULL_RTX)
+ {
+ if (! sp_in_r0)
{
emit_move_insn (r0,
gen_rtx_PLUS
- (Pmode, r0,
- GEN_INT (offset - offset_in_r0)));
- offset_in_r0 += offset - offset_in_r0;
+ (Pmode, r0, stack_pointer_rtx));
+ sp_in_r0 = 1;
}
-
- if (pre_dec != NULL_RTX)
- {
- if (! sp_in_r0)
- {
- emit_move_insn (r0,
- gen_rtx_PLUS
- (Pmode, r0, stack_pointer_rtx));
- sp_in_r0 = 1;
- }
- offset -= GET_MODE_SIZE (mode);
- offset_in_r0 -= GET_MODE_SIZE (mode);
+ offset -= GET_MODE_SIZE (mode);
+ offset_in_r0 -= GET_MODE_SIZE (mode);
+
+ mem_rtx = pre_dec;
+ }
+ else if (sp_in_r0)
+ mem_rtx = gen_rtx_MEM (mode, r0);
+ else
+ mem_rtx = gen_rtx_MEM (mode,
+ gen_rtx_PLUS (Pmode,
+ stack_pointer_rtx,
+ r0));
+
+ /* We must not use an r0-based address for target-branch
+ registers or for special registers without pre-dec
+ memory addresses, since we store their values in r0
+ first. */
+ if (TARGET_REGISTER_P (reg)
+ || ((reg == PR_REG || SPECIAL_REGISTER_P (reg))
+ && mem_rtx != pre_dec))
+ abort ();
- mem_rtx = pre_dec;
- }
- else if (sp_in_r0)
- mem_rtx = gen_rtx_MEM (mode, r0);
- else
- mem_rtx = gen_rtx_MEM (mode,
- gen_rtx_PLUS (Pmode,
- stack_pointer_rtx,
- r0));
-
- /* We must not use an r0-based address for target-branch
- registers or for special registers without pre-dec
- memory addresses, since we store their values in r0
- first. */
- if (TARGET_REGISTER_P (i)
- || ((i == PR_REG || SPECIAL_REGISTER_P (i))
- && mem_rtx != pre_dec))
- abort ();
-
- addr_ok:
- if (TARGET_REGISTER_P (i)
- || ((i == PR_REG || SPECIAL_REGISTER_P (i))
- && mem_rtx != pre_dec))
- {
- rtx r0mode = gen_rtx_REG (GET_MODE (reg_rtx), R0_REG);
+ addr_ok:
+ if (TARGET_REGISTER_P (reg)
+ || ((reg == PR_REG || SPECIAL_REGISTER_P (reg))
+ && mem_rtx != pre_dec))
+ {
+ rtx tmp_reg = gen_rtx_REG (GET_MODE (reg_rtx), *tmp_pnt);
- emit_move_insn (r0mode, reg_rtx);
+ emit_move_insn (tmp_reg, reg_rtx);
+ if (REGNO (tmp_reg) == R0_REG)
+ {
offset_in_r0 = -1;
sp_in_r0 = 0;
-
- reg_rtx = r0mode;
+ if (refers_to_regno_p (R0_REG, R0_REG+1, mem_rtx, (rtx *) 0))
+ abort ();
}
- emit_move_insn (mem_rtx, reg_rtx);
+ if (*++tmp_pnt <= 0)
+ tmp_pnt = schedule.temps;
+
+ reg_rtx = tmp_reg;
}
+ {
+ rtx insn;
+
+ /* Mark as interesting for dwarf cfi generator */
+ insn = emit_move_insn (mem_rtx, reg_rtx);
+ RTX_FRAME_RELATED_P (insn) = 1;
+
+ if (TARGET_SHCOMPACT && (offset_in_r0 != -1))
+ {
+ rtx reg_rtx = gen_rtx_REG (mode, reg);
+ rtx set, note_rtx;
+ rtx mem_rtx = gen_rtx_MEM (mode,
+ gen_rtx_PLUS (Pmode,
+ stack_pointer_rtx,
+ GEN_INT (offset)));
+
+ set = gen_rtx_SET (VOIDmode, mem_rtx, reg_rtx);
+ note_rtx = gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR, set,
+ REG_NOTES (insn));
+ REG_NOTES (insn) = note_rtx;
+ }
+ }
+ }
- if (offset != d_rounding)
+ if (entry->offset != d_rounding)
abort ();
}
else
target_flags = save_flags;
output_stack_adjust (-rounded_frame_size (d) + d_rounding,
- stack_pointer_rtx, TARGET_SH5 ? 0 : 1, frame_insn);
+ stack_pointer_rtx, 0, NULL);
if (frame_pointer_needed)
frame_insn (GEN_MOV (frame_pointer_rtx, stack_pointer_rtx));
}
void
-sh_expand_epilogue ()
+sh_expand_epilogue (void)
{
HARD_REG_SET live_regs_mask;
int d, i;
int d_rounding = 0;
int save_flags = target_flags;
- int frame_size;
+ int frame_size, save_size;
int fpscr_deferred = 0;
d = calc_live_regs (&live_regs_mask);
- if (TARGET_SH5 && d % (STACK_BOUNDARY / BITS_PER_UNIT))
- d_rounding = ((STACK_BOUNDARY / BITS_PER_UNIT)
- - d % (STACK_BOUNDARY / BITS_PER_UNIT));
+ save_size = d;
+ frame_size = rounded_frame_size (d);
+
+ if (TARGET_SH5)
+ {
+ int tregs_space = shmedia_target_regs_stack_adjust (&live_regs_mask);
+ int total_size;
+ if (d % (STACK_BOUNDARY / BITS_PER_UNIT))
+ d_rounding = ((STACK_BOUNDARY / BITS_PER_UNIT)
+ - d % (STACK_BOUNDARY / BITS_PER_UNIT));
+
+ total_size = d + tregs_space;
+ total_size += rounded_frame_size (total_size);
+ save_size = total_size - frame_size;
+
+ /* If adjusting the stack in a single step costs nothing extra, do so.
+ I.e. either if a single addi is enough, or we need a movi anyway,
+ and we don't exceed the maximum offset range (the test for the
+ latter is conservative for simplicity). */
+ if (TARGET_SHMEDIA
+ && ! frame_pointer_needed
+ && (CONST_OK_FOR_I10 (total_size)
+ || (! CONST_OK_FOR_I10 (save_size + d_rounding)
+ && total_size <= 2044)))
+ d_rounding = frame_size;
- frame_size = rounded_frame_size (d) - d_rounding;
+ frame_size -= d_rounding;
+ }
if (frame_pointer_needed)
{
- output_stack_adjust (frame_size, frame_pointer_rtx, 7, emit_insn);
+ output_stack_adjust (frame_size, frame_pointer_rtx, 1, &live_regs_mask);
/* We must avoid moving the stack pointer adjustment past code
which reads from the local frame, else an interrupt could
occur after the SP adjustment and clobber data in the local
frame. */
emit_insn (gen_blockage ());
- output_stack_adjust (frame_size, stack_pointer_rtx, 7, emit_insn);
+ output_stack_adjust (frame_size, stack_pointer_rtx, 1, &live_regs_mask);
}
if (SHMEDIA_REGS_STACK_ADJUST ())
emit_insn (gen_toggle_sz ());
if (TARGET_SH5)
{
- int offset = d_rounding;
+ int offset_base, offset;
int offset_in_r0 = -1;
int sp_in_r0 = 0;
- int align;
rtx r0 = gen_rtx_REG (Pmode, R0_REG);
- int tmp_regno = R20_REG;
-
- /* We loop twice: first, we save 8-byte aligned registers in the
- higher addresses, that are known to be aligned. Then, we
- proceed to saving 32-bit registers that don't need 8-byte
- alignment. */
- for (align = 0; align <= 1; align++)
- for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
- if (TEST_HARD_REG_BIT (live_regs_mask, i))
- {
- enum machine_mode mode = REGISTER_NATURAL_MODE (i);
- int reg = i;
- rtx reg_rtx, mem_rtx, post_inc = NULL_RTX, insn;
-
- if (mode == SFmode && (i % 2) == 0
- && ! TARGET_FPU_SINGLE && FP_REGISTER_P (i)
- && (TEST_HARD_REG_BIT (live_regs_mask, (i ^ 1))))
- {
- mode = DFmode;
- i++;
- }
+ save_schedule schedule;
+ save_entry *entry;
+ int *tmp_pnt;
+
+ entry = sh5_schedule_saves (&live_regs_mask, &schedule, d_rounding);
+ offset_base = -entry[1].offset + d_rounding;
+ tmp_pnt = schedule.temps;
+ for (; entry->mode != VOIDmode; entry--)
+ {
+ enum machine_mode mode = entry->mode;
+ int reg = entry->reg;
+ rtx reg_rtx, mem_rtx, post_inc = NULL_RTX, insn;
- /* If we're doing the aligned pass and this is not aligned,
- or we're doing the unaligned pass and this is aligned,
- skip it. */
- if ((GET_MODE_SIZE (mode) % (STACK_BOUNDARY / BITS_PER_UNIT)
- == 0) != align)
- continue;
+ offset = offset_base + entry->offset;
+ reg_rtx = gen_rtx_REG (mode, reg);
- reg_rtx = gen_rtx_REG (mode, reg);
+ mem_rtx = gen_rtx_MEM (mode,
+ gen_rtx_PLUS (Pmode,
+ stack_pointer_rtx,
+ GEN_INT (offset)));
- mem_rtx = gen_rtx_MEM (mode,
- gen_rtx_PLUS (Pmode,
- stack_pointer_rtx,
- GEN_INT (offset)));
+ GO_IF_LEGITIMATE_ADDRESS (mode, XEXP (mem_rtx, 0), try_post_inc);
- GO_IF_LEGITIMATE_ADDRESS (mode, XEXP (mem_rtx, 0), try_post_inc);
+ mem_rtx = NULL_RTX;
- mem_rtx = NULL_RTX;
+ try_post_inc:
+ do
+ if (HAVE_POST_INCREMENT
+ && (offset == offset_in_r0
+ || (offset + GET_MODE_SIZE (mode) != d + d_rounding
+ && mem_rtx == NULL_RTX)
+ || reg == PR_REG || SPECIAL_REGISTER_P (reg)))
+ {
+ post_inc = gen_rtx_MEM (mode,
+ gen_rtx_POST_INC (Pmode, r0));
- try_post_inc:
- do
- if (HAVE_POST_INCREMENT
- && (offset == offset_in_r0
- || (offset + GET_MODE_SIZE (mode) != d + d_rounding
- && mem_rtx == NULL_RTX)
- || i == PR_REG || SPECIAL_REGISTER_P (i)))
- {
- post_inc = gen_rtx_MEM (mode,
- gen_rtx_POST_INC (Pmode, r0));
+ GO_IF_LEGITIMATE_ADDRESS (mode, XEXP (post_inc, 0),
+ post_inc_ok);
- GO_IF_LEGITIMATE_ADDRESS (mode, XEXP (post_inc, 0),
- post_inc_ok);
+ post_inc = NULL_RTX;
- post_inc = NULL_RTX;
+ break;
+
+ post_inc_ok:
+ mem_rtx = NULL_RTX;
+ }
+ while (0);
+
+ if (mem_rtx != NULL_RTX)
+ goto addr_ok;
- break;
-
- post_inc_ok:
- mem_rtx = NULL_RTX;
- }
- while (0);
+ if (offset_in_r0 == -1)
+ {
+ emit_move_insn (r0, GEN_INT (offset));
+ offset_in_r0 = offset;
+ }
+ else if (offset != offset_in_r0)
+ {
+ emit_move_insn (r0,
+ gen_rtx_PLUS
+ (Pmode, r0,
+ GEN_INT (offset - offset_in_r0)));
+ offset_in_r0 += offset - offset_in_r0;
+ }
- if (mem_rtx != NULL_RTX)
- goto addr_ok;
-
- if (offset_in_r0 == -1)
- {
- emit_move_insn (r0, GEN_INT (offset));
- offset_in_r0 = offset;
- }
- else if (offset != offset_in_r0)
+ if (post_inc != NULL_RTX)
+ {
+ if (! sp_in_r0)
{
emit_move_insn (r0,
gen_rtx_PLUS
- (Pmode, r0,
- GEN_INT (offset - offset_in_r0)));
- offset_in_r0 += offset - offset_in_r0;
+ (Pmode, r0, stack_pointer_rtx));
+ sp_in_r0 = 1;
}
-
- if (post_inc != NULL_RTX)
- {
- if (! sp_in_r0)
- {
- emit_move_insn (r0,
- gen_rtx_PLUS
- (Pmode, r0, stack_pointer_rtx));
- sp_in_r0 = 1;
- }
-
- mem_rtx = post_inc;
+
+ mem_rtx = post_inc;
- offset_in_r0 += GET_MODE_SIZE (mode);
- }
- else if (sp_in_r0)
- mem_rtx = gen_rtx_MEM (mode, r0);
- else
- mem_rtx = gen_rtx_MEM (mode,
- gen_rtx_PLUS (Pmode,
- stack_pointer_rtx,
- r0));
-
- if ((i == PR_REG || SPECIAL_REGISTER_P (i))
- && mem_rtx != post_inc)
- abort ();
-
- addr_ok:
- if ((i == PR_REG || SPECIAL_REGISTER_P (i))
- && mem_rtx != post_inc)
- {
- insn = emit_move_insn (r0, mem_rtx);
- mem_rtx = r0;
- }
- else if (TARGET_REGISTER_P (i))
- {
- rtx tmp_reg = gen_rtx_REG (mode, tmp_regno);
-
- /* Give the scheduler a bit of freedom by using R20..R23
- in a round-robin fashion. Don't use R1 here because
- we want to use it for EH_RETURN_STACKADJ_RTX. */
- insn = emit_move_insn (tmp_reg, mem_rtx);
- mem_rtx = tmp_reg;
- if (++tmp_regno > R23_REG)
- tmp_regno = R20_REG;
- }
+ offset_in_r0 += GET_MODE_SIZE (mode);
+ }
+ else if (sp_in_r0)
+ mem_rtx = gen_rtx_MEM (mode, r0);
+ else
+ mem_rtx = gen_rtx_MEM (mode,
+ gen_rtx_PLUS (Pmode,
+ stack_pointer_rtx,
+ r0));
- insn = emit_move_insn (reg_rtx, mem_rtx);
+ if ((reg == PR_REG || SPECIAL_REGISTER_P (reg))
+ && mem_rtx != post_inc)
+ abort ();
- offset += GET_MODE_SIZE (mode);
+ addr_ok:
+ if ((reg == PR_REG || SPECIAL_REGISTER_P (reg))
+ && mem_rtx != post_inc)
+ {
+ insn = emit_move_insn (r0, mem_rtx);
+ mem_rtx = r0;
+ }
+ else if (TARGET_REGISTER_P (reg))
+ {
+ rtx tmp_reg = gen_rtx_REG (mode, *tmp_pnt);
+
+ /* Give the scheduler a bit of freedom by using up to
+ MAX_TEMPS registers in a round-robin fashion. */
+ insn = emit_move_insn (tmp_reg, mem_rtx);
+ mem_rtx = tmp_reg;
+ if (*++tmp_pnt < 0)
+ tmp_pnt = schedule.temps;
}
- if (offset != d + d_rounding)
- abort ();
+ insn = emit_move_insn (reg_rtx, mem_rtx);
+ if (reg == PR_MEDIA_REG && sh_media_register_for_return () >= 0)
+ /* This is dead, unless we return with a sibcall. */
+ REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_MAYBE_DEAD,
+ const0_rtx,
+ REG_NOTES (insn));
+ }
- goto finish;
+ if (entry->offset + offset_base != d + d_rounding)
+ abort ();
}
- else
- d = 0;
- if (TEST_HARD_REG_BIT (live_regs_mask, PR_REG))
- pop (PR_REG);
- for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
+ else /* ! TARGET_SH5 */
{
- int j = (FIRST_PSEUDO_REGISTER - 1) - i;
+ save_size = 0;
+ if (TEST_HARD_REG_BIT (live_regs_mask, PR_REG))
+ pop (PR_REG);
+ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
+ {
+ int j = (FIRST_PSEUDO_REGISTER - 1) - i;
+
+ if (j == FPSCR_REG && current_function_interrupt && TARGET_FMOVD
+ && hard_regs_intersect_p (&live_regs_mask,
+ ®_class_contents[DF_REGS]))
+ fpscr_deferred = 1;
+ else if (j != PR_REG && TEST_HARD_REG_BIT (live_regs_mask, j))
+ pop (j);
+ if (j == FIRST_FP_REG && fpscr_deferred)
+ pop (FPSCR_REG);
- if (j == FPSCR_REG && current_function_interrupt && TARGET_FMOVD
- && hard_regs_intersect_p (&live_regs_mask,
- ®_class_contents[DF_REGS]))
- fpscr_deferred = 1;
- else if (j != PR_REG && TEST_HARD_REG_BIT (live_regs_mask, j))
- pop (j);
- if (j == FIRST_FP_REG && fpscr_deferred)
- pop (FPSCR_REG);
+ }
}
- finish:
if (target_flags != save_flags && ! current_function_interrupt)
emit_insn (gen_toggle_sz ());
target_flags = save_flags;
output_stack_adjust (extra_push + current_function_pretend_args_size
- + d + d_rounding
+ + save_size + d_rounding
+ current_function_args_info.stack_regs * 8,
- stack_pointer_rtx, 7, emit_insn);
+ stack_pointer_rtx, 1, NULL);
if (current_function_calls_eh_return)
emit_insn (GEN_ADD3 (stack_pointer_rtx, stack_pointer_rtx,
static int sh_need_epilogue_known = 0;
int
-sh_need_epilogue ()
+sh_need_epilogue (void)
{
if (! sh_need_epilogue_known)
{
TEMP is available as a scratch register, if needed. */
void
-sh_set_return_address (ra, tmp)
- rtx ra, tmp;
+sh_set_return_address (rtx ra, rtx tmp)
{
HARD_REG_SET live_regs_mask;
int d;
- int d_rounding = 0;
int pr_reg = TARGET_SHMEDIA ? PR_MEDIA_REG : PR_REG;
int pr_offset;
if (TARGET_SH5)
{
- int i;
int offset;
- int align;
+ save_schedule schedule;
+ save_entry *entry;
- if (d % (STACK_BOUNDARY / BITS_PER_UNIT))
- d_rounding = ((STACK_BOUNDARY / BITS_PER_UNIT)
- - d % (STACK_BOUNDARY / BITS_PER_UNIT));
-
- offset = 0;
-
- /* We loop twice: first, we save 8-byte aligned registers in the
- higher addresses, that are known to be aligned. Then, we
- proceed to saving 32-bit registers that don't need 8-byte
- alignment. */
- for (align = 0; align <= 1; align++)
- for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
- if (TEST_HARD_REG_BIT (live_regs_mask, i))
- {
- enum machine_mode mode = REGISTER_NATURAL_MODE (i);
-
- if (mode == SFmode && (i % 2) == 0
- && ! TARGET_FPU_SINGLE && FP_REGISTER_P (i)
- && (TEST_HARD_REG_BIT (live_regs_mask, (i ^ 1))))
- {
- mode = DFmode;
- i++;
- }
-
- /* If we're doing the aligned pass and this is not aligned,
- or we're doing the unaligned pass and this is aligned,
- skip it. */
- if ((GET_MODE_SIZE (mode) % (STACK_BOUNDARY / BITS_PER_UNIT)
- == 0) != align)
- continue;
-
- if (i == pr_reg)
- goto found;
-
- offset += GET_MODE_SIZE (mode);
- }
+ entry = sh5_schedule_saves (&live_regs_mask, &schedule, 0);
+ offset = entry[1].offset;
+ for (; entry->mode != VOIDmode; entry--)
+ if (entry->reg == pr_reg)
+ goto found;
/* We can't find pr register. */
abort ();
found:
- pr_offset = (rounded_frame_size (d) - d_rounding + offset
+ offset = entry->offset - offset;
+ pr_offset = (rounded_frame_size (d) + offset
+ SHMEDIA_REGS_STACK_ADJUST ());
}
else
- pr_offset = rounded_frame_size (d) - d_rounding;
+ pr_offset = rounded_frame_size (d);
emit_insn (GEN_MOV (tmp, GEN_INT (pr_offset)));
emit_insn (GEN_ADD3 (tmp, tmp, frame_pointer_rtx));
/* Clear variables at function end. */
static void
-sh_output_function_epilogue (file, size)
- FILE *file ATTRIBUTE_UNUSED;
- HOST_WIDE_INT size ATTRIBUTE_UNUSED;
+sh_output_function_epilogue (FILE *file ATTRIBUTE_UNUSED,
+ HOST_WIDE_INT size ATTRIBUTE_UNUSED)
{
trap_exit = pragma_interrupt = pragma_trapa = pragma_nosave_low_regs = 0;
sh_need_epilogue_known = 0;
sp_switch = NULL_RTX;
}
-rtx
-sh_builtin_saveregs ()
+static rtx
+sh_builtin_saveregs (void)
{
/* First unnamed integer register. */
int first_intreg = current_function_args_info.arg_count[(int) SH_ARG_INT];
mem = gen_rtx_MEM (DFmode, fpregs);
set_mem_alias_set (mem, alias_set);
emit_move_insn (mem,
- gen_rtx (REG, DFmode, BASE_ARG_REG (DFmode) + regno));
+ gen_rtx_REG (DFmode, BASE_ARG_REG (DFmode) + regno));
}
regno = first_floatreg;
if (regno & 1)
{
- emit_insn (gen_addsi3 (fpregs, fpregs, GEN_INT (- UNITS_PER_WORD)));
+ emit_insn (gen_addsi3 (fpregs, fpregs, GEN_INT (-UNITS_PER_WORD)));
mem = gen_rtx_MEM (SFmode, fpregs);
set_mem_alias_set (mem, alias_set);
emit_move_insn (mem,
- gen_rtx (REG, SFmode, BASE_ARG_REG (SFmode) + regno
+ gen_rtx_REG (SFmode, BASE_ARG_REG (SFmode) + regno
- (TARGET_LITTLE_ENDIAN != 0)));
}
}
{
rtx mem;
- emit_insn (gen_addsi3 (fpregs, fpregs, GEN_INT (- UNITS_PER_WORD)));
+ emit_insn (gen_addsi3 (fpregs, fpregs, GEN_INT (-UNITS_PER_WORD)));
mem = gen_rtx_MEM (SFmode, fpregs);
set_mem_alias_set (mem, alias_set);
emit_move_insn (mem,
/* Define the `__builtin_va_list' type for the ABI. */
-tree
-sh_build_va_list ()
+static tree
+sh_build_builtin_va_list (void)
{
tree f_next_o, f_next_o_limit, f_next_fp, f_next_fp_limit, f_next_stack;
tree record;
- if (TARGET_SH5 || (! TARGET_SH2E && ! TARGET_SH4) || TARGET_HITACHI)
+ if (TARGET_SH5 || (! TARGET_SH2E && ! TARGET_SH4)
+ || TARGET_HITACHI || sh_cfun_attr_renesas_p ())
return ptr_type_node;
- record = make_node (RECORD_TYPE);
+ record = (*lang_hooks.types.make_type) (RECORD_TYPE);
f_next_o = build_decl (FIELD_DECL, get_identifier ("__va_next_o"),
ptr_type_node);
/* Implement `va_start' for varargs and stdarg. */
void
-sh_va_start (valist, nextarg)
- tree valist;
- rtx nextarg;
+sh_va_start (tree valist, rtx nextarg)
{
tree f_next_o, f_next_o_limit, f_next_fp, f_next_fp_limit, f_next_stack;
tree next_o, next_o_limit, next_fp, next_fp_limit, next_stack;
return;
}
- if ((! TARGET_SH2E && ! TARGET_SH4) || TARGET_HITACHI)
+ if ((! TARGET_SH2E && ! TARGET_SH4)
+ || TARGET_HITACHI || sh_cfun_attr_renesas_p ())
{
std_expand_builtin_va_start (valist, nextarg);
return;
/* Implement `va_arg'. */
rtx
-sh_va_arg (valist, type)
- tree valist, type;
+sh_va_arg (tree valist, tree type)
{
HOST_WIDE_INT size, rsize;
tree tmp, pptr_type_node;
rtx addr_rtx, r;
- rtx result;
+ rtx result_ptr, result = NULL_RTX;
int pass_by_ref = MUST_PASS_IN_STACK (TYPE_MODE (type), type);
+ rtx lab_over;
size = int_size_in_bytes (type);
rsize = (size + UNITS_PER_WORD - 1) & -UNITS_PER_WORD;
if (pass_by_ref)
type = build_pointer_type (type);
- if (! TARGET_SH5 && (TARGET_SH2E || TARGET_SH4) && ! TARGET_HITACHI)
+ if (! TARGET_SH5 && (TARGET_SH2E || TARGET_SH4)
+ && ! (TARGET_HITACHI || sh_cfun_attr_renesas_p ()))
{
tree f_next_o, f_next_o_limit, f_next_fp, f_next_fp_limit, f_next_stack;
tree next_o, next_o_limit, next_fp, next_fp_limit, next_stack;
int pass_as_float;
- rtx lab_false, lab_over;
+ rtx lab_false;
f_next_o = TYPE_FIELDS (va_list_type_node);
f_next_o_limit = TREE_CHAIN (f_next_o);
next_stack = build (COMPONENT_REF, TREE_TYPE (f_next_stack),
valist, f_next_stack);
+ /* Structures with a single member with a distinct mode are passed
+ like their member. This is relevant if the latter has a REAL_TYPE
+ or COMPLEX_TYPE type. */
+ if (TREE_CODE (type) == RECORD_TYPE
+ && TYPE_FIELDS (type)
+ && TREE_CODE (TYPE_FIELDS (type)) == FIELD_DECL
+ && (TREE_CODE (TREE_TYPE (TYPE_FIELDS (type))) == REAL_TYPE
+ || TREE_CODE (TREE_TYPE (TYPE_FIELDS (type))) == COMPLEX_TYPE)
+ && TREE_CHAIN (TYPE_FIELDS (type)) == NULL_TREE)
+ type = TREE_TYPE (TYPE_FIELDS (type));
if (TARGET_SH4)
{
pass_as_float = ((TREE_CODE (type) == REAL_TYPE && size <= 8)
lab_false = gen_label_rtx ();
lab_over = gen_label_rtx ();
+ tmp = make_tree (pptr_type_node, addr_rtx);
+ valist = build1 (INDIRECT_REF, ptr_type_node, tmp);
+
if (pass_as_float)
{
int first_floatreg
if (r != addr_rtx)
emit_move_insn (addr_rtx, r);
+#ifdef FUNCTION_ARG_SCmode_WART
+ if (TYPE_MODE (type) == SCmode && TARGET_SH4 && TARGET_LITTLE_ENDIAN)
+ {
+ rtx addr, real, imag, result_value, slot;
+ tree subtype = TREE_TYPE (type);
+
+ addr = std_expand_builtin_va_arg (valist, subtype);
+#ifdef POINTERS_EXTEND_UNSIGNED
+ if (GET_MODE (addr) != Pmode)
+ addr = convert_memory_address (Pmode, addr);
+#endif
+ imag = gen_rtx_MEM (TYPE_MODE (type), addr);
+ set_mem_alias_set (imag, get_varargs_alias_set ());
+
+ addr = std_expand_builtin_va_arg (valist, subtype);
+#ifdef POINTERS_EXTEND_UNSIGNED
+ if (GET_MODE (addr) != Pmode)
+ addr = convert_memory_address (Pmode, addr);
+#endif
+ real = gen_rtx_MEM (TYPE_MODE (type), addr);
+ set_mem_alias_set (real, get_varargs_alias_set ());
+
+ result_value = gen_rtx_CONCAT (SCmode, real, imag);
+ /* ??? this interface is stupid - why require a pointer? */
+ result = gen_reg_rtx (Pmode);
+ slot = assign_stack_temp (SCmode, 8, 0);
+ emit_move_insn (slot, result_value);
+ emit_move_insn (result, XEXP (slot, 0));
+ }
+#endif /* FUNCTION_ARG_SCmode_WART */
+
emit_jump_insn (gen_jump (lab_over));
emit_barrier ();
emit_label (lab_false);
emit_move_insn (addr_rtx, r);
}
- emit_label (lab_over);
-
- tmp = make_tree (pptr_type_node, addr_rtx);
- valist = build1 (INDIRECT_REF, ptr_type_node, tmp);
+ if (! result)
+ emit_label (lab_over);
}
/* ??? In va-sh.h, there had been code to make values larger than
size 8 indirect. This does not match the FUNCTION_ARG macros. */
- result = std_expand_builtin_va_arg (valist, type);
- if (pass_by_ref)
+ result_ptr = std_expand_builtin_va_arg (valist, type);
+ if (result)
{
-#ifdef POINTERS_EXTEND_UNSIGNED
- if (GET_MODE (addr) != Pmode)
+ emit_move_insn (result, result_ptr);
+ emit_label (lab_over);
+ }
+ else
+ result = result_ptr;
+
+ if (pass_by_ref)
+ {
+#ifdef POINTERS_EXTEND_UNSIGNED
+ if (GET_MODE (addr) != Pmode)
addr = convert_memory_address (Pmode, result);
#endif
result = gen_rtx_MEM (ptr_mode, force_reg (Pmode, result));
return result;
}
+bool
+sh_promote_prototypes (tree type)
+{
+ if (TARGET_HITACHI)
+ return 0;
+ if (! type)
+ return 1;
+ return ! sh_attr_renesas_p (type);
+}
+
+/* Define where to put the arguments to a function.
+ Value is zero to push the argument on the stack,
+ or a hard register in which to store the argument.
+
+ MODE is the argument's machine mode.
+ TYPE is the data type of the argument (as a tree).
+ This is null for libcalls where that information may
+ not be available.
+ CUM is a variable of type CUMULATIVE_ARGS which gives info about
+ the preceding args and about the function being called.
+ NAMED is nonzero if this argument is a named parameter
+ (otherwise it is an extra parameter matching an ellipsis).
+
+ On SH the first args are normally in registers
+ and the rest are pushed. Any arg that starts within the first
+ NPARM_REGS words is at least partially passed in a register unless
+ its data type forbids. */
+
+
+rtx
+sh_function_arg (CUMULATIVE_ARGS *ca, enum machine_mode mode,
+ tree type, int named)
+{
+ if (! TARGET_SH5 && mode == VOIDmode)
+ return GEN_INT (ca->renesas_abi ? 1 : 0);
+
+ if (! TARGET_SH5
+ && PASS_IN_REG_P (*ca, mode, type)
+ && (named || ! (TARGET_HITACHI || ca->renesas_abi)))
+ {
+ int regno;
+
+ if (mode == SCmode && TARGET_SH4 && TARGET_LITTLE_ENDIAN
+ && (! FUNCTION_ARG_SCmode_WART || (ROUND_REG (*ca, mode) & 1)))
+ {
+ rtx r1 = gen_rtx_EXPR_LIST (VOIDmode,
+ gen_rtx_REG (SFmode,
+ BASE_ARG_REG (mode)
+ + (ROUND_REG (*ca, mode) ^ 1)),
+ const0_rtx);
+ rtx r2 = gen_rtx_EXPR_LIST (VOIDmode,
+ gen_rtx_REG (SFmode,
+ BASE_ARG_REG (mode)
+ + ((ROUND_REG (*ca, mode) + 1) ^ 1)),
+ GEN_INT (4));
+ return gen_rtx_PARALLEL(SCmode, gen_rtvec(2, r1, r2));
+ }
+
+ /* If the alignment of a DF value causes an SF register to be
+ skipped, we will use that skipped register for the next SF
+ value. */
+ if ((TARGET_HITACHI || ca->renesas_abi)
+ && ca->free_single_fp_reg
+ && mode == SFmode)
+ return gen_rtx_REG (mode, ca->free_single_fp_reg);
+
+ regno = (BASE_ARG_REG (mode) + ROUND_REG (*ca, mode))
+ ^ (mode == SFmode && TARGET_SH4
+ && TARGET_LITTLE_ENDIAN != 0
+ && ! TARGET_HITACHI && ! ca->renesas_abi);
+ return gen_rtx_REG (mode, regno);
+
+ }
+
+ if (TARGET_SH5)
+ {
+ if (mode == VOIDmode && TARGET_SHCOMPACT)
+ return GEN_INT (ca->call_cookie);
+
+ /* The following test assumes unnamed arguments are promoted to
+ DFmode. */
+ if (mode == SFmode && ca->free_single_fp_reg)
+ return SH5_PROTOTYPED_FLOAT_ARG (*ca, mode, ca->free_single_fp_reg);
+
+ if ((GET_SH_ARG_CLASS (mode) == SH_ARG_FLOAT)
+ && (named || ! ca->prototype_p)
+ && ca->arg_count[(int) SH_ARG_FLOAT] < NPARM_REGS (SFmode))
+ {
+ if (! ca->prototype_p && TARGET_SHMEDIA)
+ return SH5_PROTOTYPELESS_FLOAT_ARG (*ca, mode);
+
+ return SH5_PROTOTYPED_FLOAT_ARG (*ca, mode,
+ FIRST_FP_PARM_REG
+ + ca->arg_count[(int) SH_ARG_FLOAT]);
+ }
+
+ if (ca->arg_count[(int) SH_ARG_INT] < NPARM_REGS (SImode)
+ && (! TARGET_SHCOMPACT
+ || (! SHCOMPACT_FORCE_ON_STACK (mode, type)
+ && ! SH5_WOULD_BE_PARTIAL_NREGS (*ca, mode,
+ type, named))))
+ {
+ return gen_rtx_REG (mode, (FIRST_PARM_REG
+ + ca->arg_count[(int) SH_ARG_INT]));
+ }
+
+ return 0;
+ }
+
+ return 0;
+}
+
+/* Update the data in CUM to advance over an argument
+ of mode MODE and data type TYPE.
+ (TYPE is null for libcalls where that information may not be
+ available.) */
+
+void
+sh_function_arg_advance (CUMULATIVE_ARGS *ca, enum machine_mode mode,
+ tree type, int named)
+{
+ if (ca->force_mem)
+ ca->force_mem = 0;
+ else if (TARGET_SH5)
+ {
+ tree type2 = (ca->byref && type
+ ? TREE_TYPE (type)
+ : type);
+ enum machine_mode mode2 = (ca->byref && type
+ ? TYPE_MODE (type2)
+ : mode);
+ int dwords = ((ca->byref
+ ? ca->byref
+ : mode2 == BLKmode
+ ? int_size_in_bytes (type2)
+ : GET_MODE_SIZE (mode2)) + 7) / 8;
+ int numregs = MIN (dwords, NPARM_REGS (SImode)
+ - ca->arg_count[(int) SH_ARG_INT]);
+
+ if (numregs)
+ {
+ ca->arg_count[(int) SH_ARG_INT] += numregs;
+ if (TARGET_SHCOMPACT
+ && SHCOMPACT_FORCE_ON_STACK (mode2, type2))
+ {
+ ca->call_cookie
+ |= CALL_COOKIE_INT_REG (ca->arg_count[(int) SH_ARG_INT]
+ - numregs, 1);
+ /* N.B. We want this also for outgoing. */
+ ca->stack_regs += numregs;
+ }
+ else if (ca->byref)
+ {
+ if (! ca->outgoing)
+ ca->stack_regs += numregs;
+ ca->byref_regs += numregs;
+ ca->byref = 0;
+ do
+ ca->call_cookie
+ |= CALL_COOKIE_INT_REG (ca->arg_count[(int) SH_ARG_INT]
+ - numregs, 2);
+ while (--numregs);
+ ca->call_cookie
+ |= CALL_COOKIE_INT_REG (ca->arg_count[(int) SH_ARG_INT]
+ - 1, 1);
+ }
+ else if (dwords > numregs)
+ {
+ int pushregs = numregs;
+
+ if (TARGET_SHCOMPACT)
+ ca->stack_regs += numregs;
+ while (pushregs < NPARM_REGS (SImode) - 1
+ && (CALL_COOKIE_INT_REG_GET
+ (ca->call_cookie,
+ NPARM_REGS (SImode) - pushregs)
+ == 1))
+ {
+ ca->call_cookie
+ &= ~ CALL_COOKIE_INT_REG (NPARM_REGS (SImode)
+ - pushregs, 1);
+ pushregs++;
+ }
+ if (numregs == NPARM_REGS (SImode))
+ ca->call_cookie
+ |= CALL_COOKIE_INT_REG (0, 1)
+ | CALL_COOKIE_STACKSEQ (numregs - 1);
+ else
+ ca->call_cookie
+ |= CALL_COOKIE_STACKSEQ (numregs);
+ }
+ }
+ if (GET_SH_ARG_CLASS (mode2) == SH_ARG_FLOAT
+ && (named || ! ca->prototype_p))
+ {
+ if (mode2 == SFmode && ca->free_single_fp_reg)
+ ca->free_single_fp_reg = 0;
+ else if (ca->arg_count[(int) SH_ARG_FLOAT]
+ < NPARM_REGS (SFmode))
+ {
+ int numfpregs
+ = MIN ((GET_MODE_SIZE (mode2) + 7) / 8 * 2,
+ NPARM_REGS (SFmode)
+ - ca->arg_count[(int) SH_ARG_FLOAT]);
+
+ ca->arg_count[(int) SH_ARG_FLOAT] += numfpregs;
+
+ if (TARGET_SHCOMPACT && ! ca->prototype_p)
+ {
+ if (ca->outgoing && numregs > 0)
+ do
+ {
+ ca->call_cookie
+ |= (CALL_COOKIE_INT_REG
+ (ca->arg_count[(int) SH_ARG_INT]
+ - numregs + ((numfpregs - 2) / 2),
+ 4 + (ca->arg_count[(int) SH_ARG_FLOAT]
+ - numfpregs) / 2));
+ }
+ while (numfpregs -= 2);
+ }
+ else if (mode2 == SFmode && (named)
+ && (ca->arg_count[(int) SH_ARG_FLOAT]
+ < NPARM_REGS (SFmode)))
+ ca->free_single_fp_reg
+ = FIRST_FP_PARM_REG - numfpregs
+ + ca->arg_count[(int) SH_ARG_FLOAT] + 1;
+ }
+ }
+ return;
+ }
+
+ if ((TARGET_HITACHI || ca->renesas_abi) && TARGET_FPU_DOUBLE)
+ {
+ /* Note that we've used the skipped register. */
+ if (mode == SFmode && ca->free_single_fp_reg)
+ {
+ ca->free_single_fp_reg = 0;
+ return;
+ }
+ /* When we have a DF after an SF, there's an SF register that get
+ skipped in order to align the DF value. We note this skipped
+ register, because the next SF value will use it, and not the
+ SF that follows the DF. */
+ if (mode == DFmode
+ && ROUND_REG (*ca, DFmode) != ROUND_REG (*ca, SFmode))
+ {
+ ca->free_single_fp_reg = (ROUND_REG (*ca, SFmode)
+ + BASE_ARG_REG (mode));
+ }
+ }
+
+ if (! (TARGET_SH4 || ca->renesas_abi)
+ || PASS_IN_REG_P (*ca, mode, type))
+ (ca->arg_count[(int) GET_SH_ARG_CLASS (mode)]
+ = (ROUND_REG (*ca, mode)
+ + (mode == BLKmode
+ ? ROUND_ADVANCE (int_size_in_bytes (type))
+ : ROUND_ADVANCE (GET_MODE_SIZE (mode)))));
+}
+
+/* The Renesas calling convention doesn't quite fit into this scheme since
+ the address is passed like an invisible argument, but one that is always
+ passed in memory. */
+static rtx
+sh_struct_value_rtx (tree fndecl, int incoming ATTRIBUTE_UNUSED)
+{
+ if (TARGET_HITACHI || sh_attr_renesas_p (fndecl))
+ return 0;
+ return gen_rtx_REG (Pmode, 2);
+}
+
+/* Worker function for TARGET_RETURN_IN_MEMORY. */
+
+static bool
+sh_return_in_memory (tree type, tree fndecl)
+{
+ if (TARGET_SH5)
+ {
+ if (TYPE_MODE (type) == BLKmode)
+ return ((unsigned HOST_WIDE_INT) int_size_in_bytes (type)) > 8;
+ else
+ return GET_MODE_SIZE (TYPE_MODE (type)) > 8;
+ }
+ else
+ {
+ return (TYPE_MODE (type) == BLKmode
+ || ((TARGET_HITACHI || sh_attr_renesas_p (fndecl))
+ && TREE_CODE (type) == RECORD_TYPE));
+ }
+}
+
+/* We actually emit the code in sh_expand_prologue. We used to use
+ a static variable to flag that we need to emit this code, but that
+ doesn't when inlining, when functions are deferred and then emitted
+ later. Fortunately, we already have two flags that are part of struct
+ function that tell if a function uses varargs or stdarg. */
+static void
+sh_setup_incoming_varargs (CUMULATIVE_ARGS *ca ATTRIBUTE_UNUSED,
+ enum machine_mode mode ATTRIBUTE_UNUSED,
+ tree type ATTRIBUTE_UNUSED,
+ int *pretend_arg_size ATTRIBUTE_UNUSED,
+ int second_time ATTRIBUTE_UNUSED)
+{
+ if (! current_function_stdarg)
+ abort ();
+}
+
+static bool
+sh_strict_argument_naming (CUMULATIVE_ARGS *ca ATTRIBUTE_UNUSED)
+{
+ return TARGET_SH5;
+}
+
+static bool
+sh_pretend_outgoing_varargs_named (CUMULATIVE_ARGS *ca)
+{
+ return ! (TARGET_HITACHI || ca->renesas_abi) && ! TARGET_SH5;
+}
+
+
/* Define the offset between two registers, one to be eliminated, and
the other its replacement, at the start of a routine. */
int
-initial_elimination_offset (from, to)
- int from;
- int to;
+initial_elimination_offset (int from, int to)
{
int regs_saved;
int regs_saved_rounding = 0;
int total_auto_space;
int save_flags = target_flags;
int copy_flags;
-
HARD_REG_SET live_regs_mask;
+
+ shmedia_space_reserved_for_target_registers = false;
regs_saved = calc_live_regs (&live_regs_mask);
regs_saved += SHMEDIA_REGS_STACK_ADJUST ();
+
+ if (shmedia_reserve_space_for_target_registers_p (regs_saved, &live_regs_mask))
+ {
+ shmedia_space_reserved_for_target_registers = true;
+ regs_saved += shmedia_target_regs_stack_adjust (&live_regs_mask);
+ }
+
if (TARGET_SH5 && regs_saved % (STACK_BOUNDARY / BITS_PER_UNIT))
regs_saved_rounding = ((STACK_BOUNDARY / BITS_PER_UNIT)
- regs_saved % (STACK_BOUNDARY / BITS_PER_UNIT));
{
if (TARGET_SH5)
{
- int i, n = total_saved_regs_space;
- int align;
+ int n = total_saved_regs_space;
int pr_reg = TARGET_SHMEDIA ? PR_MEDIA_REG : PR_REG;
+ save_schedule schedule;
+ save_entry *entry;
n += total_auto_space;
target_flags = copy_flags;
- /* We loop twice: first, check 8-byte aligned registers,
- that are stored in the higher addresses, that are known
- to be aligned. Then, check 32-bit registers that don't
- need 8-byte alignment. */
- for (align = 1; align >= 0; align--)
- for (i = FIRST_PSEUDO_REGISTER - 1; i >= 0; i--)
- if (TEST_HARD_REG_BIT (live_regs_mask, i))
- {
- enum machine_mode mode = REGISTER_NATURAL_MODE (i);
-
- if (mode == SFmode && (i % 2) == 1
- && ! TARGET_FPU_SINGLE && FP_REGISTER_P (i)
- && TEST_HARD_REG_BIT (live_regs_mask, (i ^ 1)))
- {
- mode = DFmode;
- i--;
- }
-
- /* If we're doing the aligned pass and this is not aligned,
- or we're doing the unaligned pass and this is aligned,
- skip it. */
- if ((GET_MODE_SIZE (mode) % (STACK_BOUNDARY / BITS_PER_UNIT)
- == 0) != align)
- continue;
-
- n -= GET_MODE_SIZE (mode);
-
- if (i == pr_reg)
- {
- target_flags = save_flags;
- return n;
- }
- }
-
+ sh5_schedule_saves (&live_regs_mask, &schedule, n);
+ for (entry = &schedule.entries[1]; entry->mode != VOIDmode; entry++)
+ if (entry->reg == pr_reg)
+ {
+ target_flags = save_flags;
+ return entry->offset;
+ }
abort ();
}
else
abort ();
}
\f
-/* Handle machine specific pragmas to be semi-compatible with Hitachi
+/* Handle machine specific pragmas to be semi-compatible with Renesas
compiler. */
void
-sh_pr_interrupt (pfile)
- struct cpp_reader *pfile ATTRIBUTE_UNUSED;
+sh_pr_interrupt (struct cpp_reader *pfile ATTRIBUTE_UNUSED)
{
pragma_interrupt = 1;
}
void
-sh_pr_trapa (pfile)
- struct cpp_reader *pfile ATTRIBUTE_UNUSED;
+sh_pr_trapa (struct cpp_reader *pfile ATTRIBUTE_UNUSED)
{
pragma_interrupt = pragma_trapa = 1;
}
void
-sh_pr_nosave_low_regs (pfile)
- struct cpp_reader *pfile ATTRIBUTE_UNUSED;
+sh_pr_nosave_low_regs (struct cpp_reader *pfile ATTRIBUTE_UNUSED)
{
pragma_nosave_low_regs = 1;
}
/* Generate 'handle_interrupt' attribute for decls */
static void
-sh_insert_attributes (node, attributes)
- tree node;
- tree * attributes;
+sh_insert_attributes (tree node, tree *attributes)
{
if (! pragma_interrupt
|| TREE_CODE (node) != FUNCTION_DECL)
to run on.
trap_exit -- use a trapa to exit an interrupt function instead of
- an rte instruction. */
+ an rte instruction.
+
+ renesas -- use Renesas calling/layout conventions (functions and
+ structures).
+
+*/
const struct attribute_spec sh_attribute_table[] =
{
{ "interrupt_handler", 0, 0, true, false, false, sh_handle_interrupt_handler_attribute },
{ "sp_switch", 1, 1, true, false, false, sh_handle_sp_switch_attribute },
{ "trap_exit", 1, 1, true, false, false, sh_handle_trap_exit_attribute },
+ { "renesas", 0, 0, false, true, false, sh_handle_renesas_attribute },
{ NULL, 0, 0, false, false, false, NULL }
};
/* Handle an "interrupt_handler" attribute; arguments as in
struct attribute_spec.handler. */
static tree
-sh_handle_interrupt_handler_attribute (node, name, args, flags, no_add_attrs)
- tree *node;
- tree name;
- tree args ATTRIBUTE_UNUSED;
- int flags ATTRIBUTE_UNUSED;
- bool *no_add_attrs;
+sh_handle_interrupt_handler_attribute (tree *node, tree name,
+ tree args ATTRIBUTE_UNUSED,
+ int flags ATTRIBUTE_UNUSED,
+ bool *no_add_attrs)
{
if (TREE_CODE (*node) != FUNCTION_DECL)
{
/* Handle an "sp_switch" attribute; arguments as in
struct attribute_spec.handler. */
static tree
-sh_handle_sp_switch_attribute (node, name, args, flags, no_add_attrs)
- tree *node;
- tree name;
- tree args;
- int flags ATTRIBUTE_UNUSED;
- bool *no_add_attrs;
+sh_handle_sp_switch_attribute (tree *node, tree name, tree args,
+ int flags ATTRIBUTE_UNUSED, bool *no_add_attrs)
{
if (TREE_CODE (*node) != FUNCTION_DECL)
{
/* Handle an "trap_exit" attribute; arguments as in
struct attribute_spec.handler. */
static tree
-sh_handle_trap_exit_attribute (node, name, args, flags, no_add_attrs)
- tree *node;
- tree name;
- tree args;
- int flags ATTRIBUTE_UNUSED;
- bool *no_add_attrs;
+sh_handle_trap_exit_attribute (tree *node, tree name, tree args,
+ int flags ATTRIBUTE_UNUSED, bool *no_add_attrs)
{
if (TREE_CODE (*node) != FUNCTION_DECL)
{
return NULL_TREE;
}
+static tree
+sh_handle_renesas_attribute (tree *node ATTRIBUTE_UNUSED,
+ tree name ATTRIBUTE_UNUSED,
+ tree args ATTRIBUTE_UNUSED,
+ int flags ATTRIBUTE_UNUSED,
+ bool *no_add_attrs ATTRIBUTE_UNUSED)
+{
+ return NULL_TREE;
+}
+
+/* True if __attribute__((renesas)) or -mrenesas. */
+int
+sh_attr_renesas_p (tree td)
+{
+ if (TARGET_HITACHI)
+ return 1;
+ if (td == 0)
+ return 0;
+ if (DECL_P (td))
+ td = TREE_TYPE (td);
+ return (lookup_attribute ("renesas", TYPE_ATTRIBUTES (td))
+ != NULL_TREE);
+}
+
+/* True if __attribute__((renesas)) or -mrenesas, for the current
+ function. */
+int
+sh_cfun_attr_renesas_p (void)
+{
+ return sh_attr_renesas_p (current_function_decl);
+}
+
int
-sh_cfun_interrupt_handler_p ()
+sh_cfun_interrupt_handler_p (void)
{
return (lookup_attribute ("interrupt_handler",
DECL_ATTRIBUTES (current_function_decl))
!= NULL_TREE);
}
+
+/* ??? target_switches in toplev.c is static, hence we have to duplicate it. */
+static const struct
+{
+ const char *const name;
+ const int value;
+ const char *const description;
+}
+sh_target_switches[] = TARGET_SWITCHES;
+#define target_switches sh_target_switches
+
+/* Like default_pch_valid_p, but take flag_mask into account. */
+const char *
+sh_pch_valid_p (const void *data_p, size_t len)
+{
+ const char *data = (const char *)data_p;
+ const char *flag_that_differs = NULL;
+ size_t i;
+ int old_flags;
+ int flag_mask
+ = (SH1_BIT | SH2_BIT | SH3_BIT | SH_E_BIT | HARD_SH4_BIT | FPU_SINGLE_BIT
+ | SH4_BIT | HITACHI_BIT | LITTLE_ENDIAN_BIT);
+
+ /* -fpic and -fpie also usually make a PCH invalid. */
+ if (data[0] != flag_pic)
+ return _("created and used with different settings of -fpic");
+ if (data[1] != flag_pie)
+ return _("created and used with different settings of -fpie");
+ data += 2;
+
+ /* Check target_flags. */
+ memcpy (&old_flags, data, sizeof (target_flags));
+ if (((old_flags ^ target_flags) & flag_mask) != 0)
+ {
+ for (i = 0; i < ARRAY_SIZE (target_switches); i++)
+ {
+ int bits;
+
+ bits = target_switches[i].value;
+ if (bits < 0)
+ bits = -bits;
+ bits &= flag_mask;
+ if ((target_flags & bits) != (old_flags & bits))
+ {
+ flag_that_differs = target_switches[i].name;
+ goto make_message;
+ }
+ }
+ abort ();
+ }
+ data += sizeof (target_flags);
+ len -= sizeof (target_flags);
+
+ /* Check string options. */
+#ifdef TARGET_OPTIONS
+ for (i = 0; i < ARRAY_SIZE (target_options); i++)
+ {
+ const char *str = *target_options[i].variable;
+ size_t l;
+ if (! str)
+ str = "";
+ l = strlen (str) + 1;
+ if (len < l || memcmp (data, str, l) != 0)
+ {
+ flag_that_differs = target_options[i].prefix;
+ goto make_message;
+ }
+ data += l;
+ len -= l;
+ }
+#endif
+
+ return NULL;
+
+ make_message:
+ {
+ char *r;
+ asprintf (&r, _("created and used with differing settings of `-m%s'"),
+ flag_that_differs);
+ if (r == NULL)
+ return _("out of memory");
+ return r;
+ }
+}
\f
/* Predicates used by the templates. */
Used only in general_movsrc_operand. */
int
-system_reg_operand (op, mode)
- rtx op;
- enum machine_mode mode ATTRIBUTE_UNUSED;
+system_reg_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
{
switch (REGNO (op))
{
invalid as are subregs of system registers. */
int
-general_movsrc_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+general_movsrc_operand (rtx op, enum machine_mode mode)
{
if (GET_CODE (op) == MEM)
{
Same as general_operand, but no preinc allowed. */
int
-general_movdst_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+general_movdst_operand (rtx op, enum machine_mode mode)
{
/* Only pre dec allowed. */
if (GET_CODE (op) == MEM && GET_CODE (XEXP (op, 0)) == POST_INC)
/* Returns 1 if OP is a normal arithmetic register. */
int
-arith_reg_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+arith_reg_operand (rtx op, enum machine_mode mode)
{
if (register_operand (op, mode))
{
because this would lead to missing sign extensions when truncating from
DImode to SImode. */
int
-arith_reg_dest (op, mode)
- rtx op;
- enum machine_mode mode;
+arith_reg_dest (rtx op, enum machine_mode mode)
{
if (mode == DImode && GET_CODE (op) == SUBREG
&& GET_MODE_SIZE (GET_MODE (SUBREG_REG (op))) < 8)
}
int
-int_gpr_dest (op, mode)
- rtx op;
- enum machine_mode mode ATTRIBUTE_UNUSED;
+int_gpr_dest (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
{
enum machine_mode op_mode = GET_MODE (op);
}
int
-fp_arith_reg_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+fp_arith_reg_operand (rtx op, enum machine_mode mode)
{
if (register_operand (op, mode))
{
/* Returns 1 if OP is a valid source operand for an arithmetic insn. */
int
-arith_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+arith_operand (rtx op, enum machine_mode mode)
{
if (arith_reg_operand (op, mode))
return 1;
if (TARGET_SHMEDIA)
{
/* FIXME: We should be checking whether the CONST_INT fits in a
- CONST_OK_FOR_J here, but this causes reload_cse to crash when
+ CONST_OK_FOR_I16 here, but this causes reload_cse to crash when
attempting to transform a sequence of two 64-bit sets of the
same register from literal constants into a set and an add,
when the difference is too wide for an add. */
if (GET_CODE (op) == CONST_INT
- || EXTRA_CONSTRAINT_S (op))
+ || EXTRA_CONSTRAINT_C16 (op))
return 1;
else
return 0;
}
- else if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_I (INTVAL (op)))
+ else if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_I08 (INTVAL (op)))
return 1;
return 0;
/* Returns 1 if OP is a valid source operand for a compare insn. */
int
-arith_reg_or_0_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+arith_reg_or_0_operand (rtx op, enum machine_mode mode)
{
if (arith_reg_operand (op, mode))
return 1;
- if (EXTRA_CONSTRAINT_U (op))
+ if (EXTRA_CONSTRAINT_Z (op))
return 1;
return 0;
that takes either a register or a 6-bit immediate. */
int
-shmedia_6bit_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+shmedia_6bit_operand (rtx op, enum machine_mode mode)
{
return (arith_reg_operand (op, mode)
- || (GET_CODE (op) == CONST_INT && CONST_OK_FOR_O (INTVAL (op))));
+ || (GET_CODE (op) == CONST_INT && CONST_OK_FOR_I06 (INTVAL (op))));
}
/* Returns 1 if OP is a valid source operand for a logical operation. */
int
-logical_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+logical_operand (rtx op, enum machine_mode mode)
{
if (arith_reg_operand (op, mode))
return 1;
if (TARGET_SHMEDIA)
{
- if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_P (INTVAL (op)))
+ if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_I10 (INTVAL (op)))
return 1;
else
return 0;
}
- else if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_L (INTVAL (op)))
+ else if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_K08 (INTVAL (op)))
return 1;
return 0;
}
int
-and_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+and_operand (rtx op, enum machine_mode mode)
{
if (logical_operand (op, mode))
return 1;
if (TARGET_SHMEDIA
&& mode == DImode
&& GET_CODE (op) == CONST_INT
- && (INTVAL (op) == (unsigned) 0xffffffff
- || INTVAL (op) == (HOST_WIDE_INT) -1 << 32))
- return 1;
+ && CONST_OK_FOR_J16 (INTVAL (op)))
+ return 1;
return 0;
}
/* Nonzero if OP is a floating point value with value 0.0. */
int
-fp_zero_operand (op)
- rtx op;
+fp_zero_operand (rtx op)
{
REAL_VALUE_TYPE r;
/* Nonzero if OP is a floating point value with value 1.0. */
int
-fp_one_operand (op)
- rtx op;
+fp_one_operand (rtx op)
{
REAL_VALUE_TYPE r;
choosing an fldi alternative during reload and thus failing to
allocate a scratch register for the constant loading. */
int
-fldi_ok ()
+fldi_ok (void)
{
return ! TARGET_SH4 || TARGET_FMOVD || reload_completed;
}
int
-tertiary_reload_operand (op, mode)
- rtx op;
- enum machine_mode mode ATTRIBUTE_UNUSED;
+tertiary_reload_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
{
enum rtx_code code = GET_CODE (op);
return code == MEM || (TARGET_SH4 && code == CONST_DOUBLE);
}
int
-fpscr_operand (op, mode)
- rtx op;
- enum machine_mode mode ATTRIBUTE_UNUSED;
+fpscr_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
{
return (GET_CODE (op) == REG && REGNO (op) == FPSCR_REG
&& GET_MODE (op) == PSImode);
}
int
-fpul_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+fpul_operand (rtx op, enum machine_mode mode)
{
if (TARGET_SHMEDIA)
return fp_arith_reg_operand (op, mode);
}
int
-symbol_ref_operand (op, mode)
- rtx op;
- enum machine_mode mode ATTRIBUTE_UNUSED;
+symbol_ref_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
{
return (GET_CODE (op) == SYMBOL_REF);
}
/* Return the TLS type for TLS symbols, 0 for otherwise. */
int
-tls_symbolic_operand (op, mode)
- rtx op;
- enum machine_mode mode ATTRIBUTE_UNUSED;
+tls_symbolic_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
{
if (GET_CODE (op) != SYMBOL_REF)
return 0;
}
int
-commutative_float_operator (op, mode)
- rtx op;
- enum machine_mode mode;
+commutative_float_operator (rtx op, enum machine_mode mode)
{
if (GET_MODE (op) != mode)
return 0;
}
int
-noncommutative_float_operator (op, mode)
- rtx op;
- enum machine_mode mode;
+noncommutative_float_operator (rtx op, enum machine_mode mode)
{
if (GET_MODE (op) != mode)
return 0;
}
int
-unary_float_operator (op, mode)
- rtx op;
- enum machine_mode mode;
+unary_float_operator (rtx op, enum machine_mode mode)
{
if (GET_MODE (op) != mode)
return 0;
}
int
-binary_float_operator (op, mode)
- rtx op;
- enum machine_mode mode;
+binary_float_operator (rtx op, enum machine_mode mode)
{
if (GET_MODE (op) != mode)
return 0;
}
int
-binary_logical_operator (op, mode)
- rtx op;
- enum machine_mode mode;
+binary_logical_operator (rtx op, enum machine_mode mode)
{
if (GET_MODE (op) != mode)
return 0;
}
int
-equality_comparison_operator (op, mode)
- rtx op;
- enum machine_mode mode;
+equality_comparison_operator (rtx op, enum machine_mode mode)
{
return ((mode == VOIDmode || GET_MODE (op) == mode)
&& (GET_CODE (op) == EQ || GET_CODE (op) == NE));
}
-int greater_comparison_operator (op, mode)
- rtx op;
- enum machine_mode mode;
+int
+greater_comparison_operator (rtx op, enum machine_mode mode)
{
if (mode != VOIDmode && GET_MODE (op) == mode)
return 0;
}
}
-int less_comparison_operator (op, mode)
- rtx op;
- enum machine_mode mode;
+int
+less_comparison_operator (rtx op, enum machine_mode mode)
{
if (mode != VOIDmode && GET_MODE (op) == mode)
return 0;
/* Accept pseudos and branch target registers. */
int
-target_reg_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+target_reg_operand (rtx op, enum machine_mode mode)
{
if (mode != DImode
|| GET_MODE (op) != DImode)
/* Same as target_reg_operand, except that label_refs and symbol_refs
are accepted before reload. */
int
-target_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+target_operand (rtx op, enum machine_mode mode)
{
if (mode != DImode)
return 0;
if ((GET_MODE (op) == DImode || GET_MODE (op) == VOIDmode)
- && EXTRA_CONSTRAINT_T (op))
+ && EXTRA_CONSTRAINT_Csy (op))
return ! reload_completed;
return target_reg_operand (op, mode);
}
int
-mextr_bit_offset (op, mode)
- rtx op;
- enum machine_mode mode ATTRIBUTE_UNUSED;
+mextr_bit_offset (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
{
HOST_WIDE_INT i;
if (GET_CODE (op) != CONST_INT)
return 0;
i = INTVAL (op);
- return i >= 1*8 && i <= 7*8 && (i & 7) == 0;
+ return i >= 1 * 8 && i <= 7 * 8 && (i & 7) == 0;
}
int
-extend_reg_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+extend_reg_operand (rtx op, enum machine_mode mode)
{
return (GET_CODE (op) == TRUNCATE
? arith_operand
}
int
-trunc_hi_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+trunc_hi_operand (rtx op, enum machine_mode mode)
{
enum machine_mode op_mode = GET_MODE (op);
}
int
-extend_reg_or_0_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+extend_reg_or_0_operand (rtx op, enum machine_mode mode)
{
return (GET_CODE (op) == TRUNCATE
? arith_operand
}
int
-general_extend_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+general_extend_operand (rtx op, enum machine_mode mode)
{
return (GET_CODE (op) == TRUNCATE
? arith_operand
}
int
-inqhi_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+inqhi_operand (rtx op, enum machine_mode mode)
{
if (GET_CODE (op) != TRUNCATE || mode != GET_MODE (op))
return 0;
}
int
-sh_rep_vec (v, mode)
- rtx v;
- enum machine_mode mode;
+sh_rep_vec (rtx v, enum machine_mode mode)
{
int i;
rtx x, y;
if (GET_MODE_UNIT_SIZE (mode) == 1)
{
y = XVECEXP (v, 0, i);
- for (i -= 2 ; i >= 0; i -= 2)
+ for (i -= 2; i >= 0; i -= 2)
if (! rtx_equal_p (XVECEXP (v, 0, i + 1), x)
|| ! rtx_equal_p (XVECEXP (v, 0, i), y))
return 0;
/* Determine if V is a constant vector matching MODE with only one element
that is not a sign extension. Two byte-sized elements count as one. */
int
-sh_1el_vec (v, mode)
- rtx v;
- enum machine_mode mode;
+sh_1el_vec (rtx v, enum machine_mode mode)
{
int unit_size;
int i, last, least, sign_ix;
}
int
-sh_const_vec (v, mode)
- rtx v;
- enum machine_mode mode;
+sh_const_vec (rtx v, enum machine_mode mode)
{
int i;
/* Return the destination address of a branch. */
static int
-branch_dest (branch)
- rtx branch;
+branch_dest (rtx branch)
{
rtx dest = SET_SRC (PATTERN (branch));
int dest_uid;
We assume REG is a reload reg, and therefore does
not live past labels. It may live past calls or jumps though. */
int
-reg_unused_after (reg, insn)
- rtx reg;
- rtx insn;
+reg_unused_after (rtx reg, rtx insn)
{
enum rtx_code code;
rtx set;
while ((insn = NEXT_INSN (insn)))
{
+ rtx set;
+ if (!INSN_P (insn))
+ continue;
+
code = GET_CODE (insn);
#if 0
else if (code == JUMP_INSN)
return 0;
}
- else if (GET_RTX_CLASS (code) == 'i')
- {
- rtx set = single_set (insn);
- if (set && reg_overlap_mentioned_p (reg, SET_SRC (set)))
- return 0;
- if (set && reg_overlap_mentioned_p (reg, SET_DEST (set)))
- return GET_CODE (SET_DEST (set)) != MEM;
- if (set == 0 && reg_overlap_mentioned_p (reg, PATTERN (insn)))
- return 0;
- }
+ set = single_set (insn);
+ if (set && reg_overlap_mentioned_p (reg, SET_SRC (set)))
+ return 0;
+ if (set && reg_overlap_mentioned_p (reg, SET_DEST (set)))
+ return GET_CODE (SET_DEST (set)) != MEM;
+ if (set == 0 && reg_overlap_mentioned_p (reg, PATTERN (insn)))
+ return 0;
if (code == CALL_INSN && call_used_regs[REGNO (reg)])
return 1;
static GTY(()) rtx fpscr_rtx;
rtx
-get_fpscr_rtx ()
+get_fpscr_rtx (void)
{
if (! fpscr_rtx)
{
- fpscr_rtx = gen_rtx (REG, PSImode, FPSCR_REG);
+ fpscr_rtx = gen_rtx_REG (PSImode, FPSCR_REG);
REG_USERVAR_P (fpscr_rtx) = 1;
mark_user_reg (fpscr_rtx);
}
}
void
-emit_sf_insn (pat)
- rtx pat;
+emit_sf_insn (rtx pat)
{
emit_insn (pat);
}
void
-emit_df_insn (pat)
- rtx pat;
+emit_df_insn (rtx pat)
{
emit_insn (pat);
}
void
-expand_sf_unop (fun, operands)
- rtx (*fun) PARAMS ((rtx, rtx, rtx));
- rtx *operands;
+expand_sf_unop (rtx (*fun) (rtx, rtx, rtx), rtx *operands)
{
emit_sf_insn ((*fun) (operands[0], operands[1], get_fpscr_rtx ()));
}
void
-expand_sf_binop (fun, operands)
- rtx (*fun) PARAMS ((rtx, rtx, rtx, rtx));
- rtx *operands;
+expand_sf_binop (rtx (*fun) (rtx, rtx, rtx, rtx), rtx *operands)
{
emit_sf_insn ((*fun) (operands[0], operands[1], operands[2],
get_fpscr_rtx ()));
}
void
-expand_df_unop (fun, operands)
- rtx (*fun) PARAMS ((rtx, rtx, rtx));
- rtx *operands;
+expand_df_unop (rtx (*fun) (rtx, rtx, rtx), rtx *operands)
{
emit_df_insn ((*fun) (operands[0], operands[1], get_fpscr_rtx ()));
}
void
-expand_df_binop (fun, operands)
- rtx (*fun) PARAMS ((rtx, rtx, rtx, rtx));
- rtx *operands;
+expand_df_binop (rtx (*fun) (rtx, rtx, rtx, rtx), rtx *operands)
{
emit_df_insn ((*fun) (operands[0], operands[1], operands[2],
- get_fpscr_rtx ()));
+ get_fpscr_rtx ()));
}
\f
/* ??? gcc does flow analysis strictly after common subexpression
same basic block. */
static void
-mark_use (x, reg_set_block)
- rtx x, *reg_set_block;
+mark_use (rtx x, rtx *reg_set_block)
{
enum rtx_code code;
}
}
\f
-static rtx get_free_reg PARAMS ((HARD_REG_SET));
+static rtx get_free_reg (HARD_REG_SET);
/* This function returns a register to use to load the address to load
the fpscr from. Currently it always returns r1 or r7, but when we are
the middle. */
static rtx
-get_free_reg (regs_live)
- HARD_REG_SET regs_live;
+get_free_reg (HARD_REG_SET regs_live)
{
if (! TEST_HARD_REG_BIT (regs_live, 1))
return gen_rtx_REG (Pmode, 1);
/* This function will set the fpscr from memory.
MODE is the mode we are setting it to. */
void
-fpscr_set_from_mem (mode, regs_live)
- int mode;
- HARD_REG_SET regs_live;
+fpscr_set_from_mem (int mode, HARD_REG_SET regs_live)
{
enum attr_fp_mode fp_mode = mode;
rtx addr_reg = get_free_reg (regs_live);
#endif
int
-sh_insn_length_adjustment (insn)
- rtx insn;
+sh_insn_length_adjustment (rtx insn)
{
/* Instructions with unfilled delay slots take up an extra two bytes for
the nop in the delay slot. */
/* Return TRUE if X references a SYMBOL_REF or LABEL_REF whose symbol
isn't protected by a PIC unspec. */
int
-nonpic_symbol_mentioned_p (x)
- rtx x;
+nonpic_symbol_mentioned_p (rtx x)
{
register const char *fmt;
register int i;
|| XINT (x, 1) == UNSPEC_GOTTPOFF
|| XINT (x, 1) == UNSPEC_DTPOFF
|| XINT (x, 1) == UNSPEC_PLT))
- return 0;
+ return 0;
fmt = GET_RTX_FORMAT (GET_CODE (x));
for (i = GET_RTX_LENGTH (GET_CODE (x)) - 1; i >= 0; i--)
/* Convert a non-PIC address in `orig' to a PIC address using @GOT or
@GOTOFF in `reg'. */
rtx
-legitimize_pic_address (orig, mode, reg)
- rtx orig;
- enum machine_mode mode ATTRIBUTE_UNUSED;
- rtx reg;
+legitimize_pic_address (rtx orig, enum machine_mode mode ATTRIBUTE_UNUSED,
+ rtx reg)
{
if (tls_symbolic_operand (orig, Pmode))
return orig;
/* Mark the use of a constant in the literal table. If the constant
has multiple labels, make it unique. */
static rtx
-mark_constant_pool_use (x)
- rtx x;
+mark_constant_pool_use (rtx x)
{
rtx insn, lab, pattern;
of an unconditional jump BRANCH2. We only want to do this if the
resulting branch will have a short displacement. */
int
-sh_can_redirect_branch (branch1, branch2)
- rtx branch1;
- rtx branch2;
+sh_can_redirect_branch (rtx branch1, rtx branch2)
{
if (flag_expensive_optimizations && simplejump_p (branch2))
{
/* Return nonzero if register old_reg can be renamed to register new_reg. */
int
-sh_hard_regno_rename_ok (old_reg, new_reg)
- unsigned int old_reg ATTRIBUTE_UNUSED;
- unsigned int new_reg;
+sh_hard_regno_rename_ok (unsigned int old_reg ATTRIBUTE_UNUSED,
+ unsigned int new_reg)
{
-
-/* Interrupt functions can only use registers that have already been
- saved by the prologue, even if they would normally be
- call-clobbered. */
+ /* Interrupt functions can only use registers that have already been
+ saved by the prologue, even if they would normally be
+ call-clobbered. */
if (sh_cfun_interrupt_handler_p () && !regs_ever_live[new_reg])
- return 0;
+ return 0;
- return 1;
+ return 1;
}
/* Function to update the integer COST
the same cost as a data-dependence. The return value should be
the new value for COST. */
static int
-sh_adjust_cost (insn, link, dep_insn, cost)
- rtx insn;
- rtx link ATTRIBUTE_UNUSED;
- rtx dep_insn;
- int cost;
+sh_adjust_cost (rtx insn, rtx link ATTRIBUTE_UNUSED, rtx dep_insn, int cost)
{
rtx reg, use_pat;
if (TARGET_SHMEDIA)
{
/* On SHmedia, if the dependence is an anti-dependence or
- output-dependence, there is no cost. */
+ output-dependence, there is no cost. */
if (REG_NOTE_KIND (link) != 0)
cost = 0;
&& get_attr_type (insn) == TYPE_DYN_SHIFT
&& get_attr_any_int_load (dep_insn) == ANY_INT_LOAD_YES
&& reg_overlap_mentioned_p (SET_DEST (PATTERN (dep_insn)),
- XEXP (SET_SRC (single_set(insn)),
+ XEXP (SET_SRC (single_set (insn)),
1)))
cost++;
/* When an LS group instruction with a latency of less than
/* Check if INSN is flow-dependent on DEP_INSN. Can also be used to check
if DEP_INSN is anti-flow dependent on INSN. */
static int
-flow_dependent_p (insn, dep_insn)
- rtx insn, dep_insn;
+flow_dependent_p (rtx insn, rtx dep_insn)
{
rtx tmp = PATTERN (insn);
/* A helper function for flow_dependent_p called through note_stores. */
static void
-flow_dependent_p_1 (x, pat, data)
- rtx x;
- rtx pat ATTRIBUTE_UNUSED;
- void *data;
+flow_dependent_p_1 (rtx x, rtx pat ATTRIBUTE_UNUSED, void *data)
{
rtx * pinsn = (rtx *) data;
do not look like function calls to leaf_function_p. Hence we must
do this extra check. */
int
-sh_pr_n_sets ()
+sh_pr_n_sets (void)
{
return REG_N_SETS (TARGET_SHMEDIA ? PR_MEDIA_REG : PR_REG);
}
/* This Function returns nonzero if the DFA based scheduler interface
is to be used. At present this is supported for the SH4 only. */
static int
-sh_use_dfa_interface()
+sh_use_dfa_interface (void)
{
if (TARGET_HARD_SH4)
return 1;
/* This function returns "2" to indicate dual issue for the SH4
processor. To be used by the DFA pipeline description. */
static int
-sh_issue_rate()
+sh_issue_rate (void)
{
if (TARGET_SUPERSCALAR)
return 2;
return 1;
}
+/* Functions for ready queue reordering for sched1. */
+
+/* Get weight for mode for a set x. */
+static short
+find_set_regmode_weight (rtx x, enum machine_mode mode)
+{
+ if (GET_CODE (x) == CLOBBER && register_operand (SET_DEST (x), mode))
+ return 1;
+ if (GET_CODE (x) == SET && register_operand (SET_DEST (x), mode))
+ {
+ if (GET_CODE (SET_DEST (x)) == REG)
+ {
+ if (!reg_mentioned_p (SET_DEST (x), SET_SRC (x)))
+ return 1;
+ else
+ return 0;
+ }
+ return 1;
+ }
+ return 0;
+}
+
+/* Get regmode weight for insn. */
+static short
+find_insn_regmode_weight (rtx insn, enum machine_mode mode)
+{
+ short reg_weight = 0;
+ rtx x;
+
+ /* Increment weight for each register born here. */
+ x = PATTERN (insn);
+ reg_weight += find_set_regmode_weight (x, mode);
+ if (GET_CODE (x) == PARALLEL)
+ {
+ int j;
+ for (j = XVECLEN (x, 0) - 1; j >= 0; j--)
+ {
+ x = XVECEXP (PATTERN (insn), 0, j);
+ reg_weight += find_set_regmode_weight (x, mode);
+ }
+ }
+ /* Decrement weight for each register that dies here. */
+ for (x = REG_NOTES (insn); x; x = XEXP (x, 1))
+ {
+ if (REG_NOTE_KIND (x) == REG_DEAD || REG_NOTE_KIND (x) == REG_UNUSED)
+ {
+ rtx note = XEXP (x, 0);
+ if (GET_CODE (note) == REG && GET_MODE (note) == mode)
+ reg_weight--;
+ }
+ }
+ return reg_weight;
+}
+
+/* Calculate regmode weights for all insns of a basic block. */
+static void
+find_regmode_weight (int b, enum machine_mode mode)
+{
+ rtx insn, next_tail, head, tail;
+
+ get_block_head_tail (b, &head, &tail);
+ next_tail = NEXT_INSN (tail);
+
+ for (insn = head; insn != next_tail; insn = NEXT_INSN (insn))
+ {
+ /* Handle register life information. */
+ if (!INSN_P (insn))
+ continue;
+
+ if (mode == SFmode)
+ INSN_REGMODE_WEIGHT (insn, mode) =
+ find_insn_regmode_weight (insn, mode) + 2 * find_insn_regmode_weight (insn, DFmode);
+ else if (mode == SImode)
+ INSN_REGMODE_WEIGHT (insn, mode) =
+ find_insn_regmode_weight (insn, mode) + 2 * find_insn_regmode_weight (insn, DImode);
+ }
+}
+
+/* Comparison function for ready queue sorting. */
+static int
+rank_for_reorder (const void *x, const void *y)
+{
+ rtx tmp = *(const rtx *) y;
+ rtx tmp2 = *(const rtx *) x;
+
+ /* The insn in a schedule group should be issued the first. */
+ if (SCHED_GROUP_P (tmp) != SCHED_GROUP_P (tmp2))
+ return SCHED_GROUP_P (tmp2) ? 1 : -1;
+
+ /* If insns are equally good, sort by INSN_LUID (original insn order), This
+ minimizes instruction movement, thus minimizing sched's effect on
+ register pressure. */
+ return INSN_LUID (tmp) - INSN_LUID (tmp2);
+}
+
+/* Resort the array A in which only element at index N may be out of order. */
+static void
+swap_reorder (rtx *a, int n)
+{
+ rtx insn = a[n - 1];
+ int i = n - 2;
+
+ while (i >= 0 && rank_for_reorder (a + i, &insn) >= 0)
+ {
+ a[i + 1] = a[i];
+ i -= 1;
+ }
+ a[i + 1] = insn;
+}
+
+#define SCHED_REORDER(READY, N_READY) \
+ do \
+ { \
+ if ((N_READY) == 2) \
+ swap_reorder (READY, N_READY); \
+ else if ((N_READY) > 2) \
+ qsort (READY, N_READY, sizeof (rtx), rank_for_reorder); \
+ } \
+ while (0)
+
+/* Sort the ready list READY by ascending priority, using the SCHED_REORDER
+ macro. */
+static void
+ready_reorder (rtx *ready, int nready)
+{
+ SCHED_REORDER (ready, nready);
+}
+
+/* Calculate regmode weights for all insns of all basic block. */
+static void
+sh_md_init_global (FILE *dump ATTRIBUTE_UNUSED,
+ int verbose ATTRIBUTE_UNUSED,
+ int old_max_uid)
+{
+ basic_block b;
+
+ regmode_weight[0] = (short *) xcalloc (old_max_uid, sizeof (short));
+ regmode_weight[1] = (short *) xcalloc (old_max_uid, sizeof (short));
+
+ FOR_EACH_BB_REVERSE (b)
+ {
+ find_regmode_weight (b->index, SImode);
+ find_regmode_weight (b->index, SFmode);
+ }
+
+ CURR_REGMODE_PRESSURE (SImode) = 0;
+ CURR_REGMODE_PRESSURE (SFmode) = 0;
+
+}
+
+/* Cleanup. */
+static void
+sh_md_finish_global (FILE *dump ATTRIBUTE_UNUSED,
+ int verbose ATTRIBUTE_UNUSED)
+{
+ if (regmode_weight[0])
+ {
+ free (regmode_weight[0]);
+ regmode_weight[0] = NULL;
+ }
+ if (regmode_weight[1])
+ {
+ free (regmode_weight[1]);
+ regmode_weight[1] = NULL;
+ }
+}
+
+/* Cache the can_issue_more so that we can return it from reorder2. Also,
+ keep count of register pressures on SImode and SFmode. */
+static int
+sh_variable_issue (FILE *dump ATTRIBUTE_UNUSED,
+ int sched_verbose ATTRIBUTE_UNUSED,
+ rtx insn,
+ int can_issue_more)
+{
+ if (GET_CODE (PATTERN (insn)) != USE
+ && GET_CODE (PATTERN (insn)) != CLOBBER)
+ cached_can_issue_more = can_issue_more - 1;
+ else
+ cached_can_issue_more = can_issue_more;
+
+ if (reload_completed)
+ return cached_can_issue_more;
+
+ CURR_REGMODE_PRESSURE (SImode) += INSN_REGMODE_WEIGHT (insn, SImode);
+ CURR_REGMODE_PRESSURE (SFmode) += INSN_REGMODE_WEIGHT (insn, SFmode);
+
+ return cached_can_issue_more;
+}
+
+static void
+sh_md_init (FILE *dump ATTRIBUTE_UNUSED,
+ int verbose ATTRIBUTE_UNUSED,
+ int veclen ATTRIBUTE_UNUSED)
+{
+ CURR_REGMODE_PRESSURE (SImode) = 0;
+ CURR_REGMODE_PRESSURE (SFmode) = 0;
+}
+
+/* Some magic numbers. */
+/* Pressure on register r0 can lead to spill failures. so avoid sched1 for
+ functions that already have high pressure on r0. */
+#define R0_MAX_LIFE_REGIONS 2
+#define R0_MAX_LIVE_LENGTH 12
+/* Register Pressure thresholds for SImode and SFmode registers. */
+#define SIMODE_MAX_WEIGHT 5
+#define SFMODE_MAX_WEIGHT 10
+
+/* Return true if the pressure is high for MODE. */
+static short
+high_pressure (enum machine_mode mode)
+{
+ /* Pressure on register r0 can lead to spill failures. so avoid sched1 for
+ functions that already have high pressure on r0. */
+ if ((REG_N_SETS (0) - REG_N_DEATHS (0)) >= R0_MAX_LIFE_REGIONS
+ && REG_LIVE_LENGTH (0) >= R0_MAX_LIVE_LENGTH)
+ return 1;
+
+ if (mode == SFmode)
+ return (CURR_REGMODE_PRESSURE (SFmode) > SFMODE_MAX_WEIGHT);
+ else
+ return (CURR_REGMODE_PRESSURE (SImode) > SIMODE_MAX_WEIGHT);
+}
+
+/* Reorder ready queue if register pressure is high. */
+static int
+sh_reorder (FILE *dump ATTRIBUTE_UNUSED,
+ int sched_verbose ATTRIBUTE_UNUSED,
+ rtx *ready,
+ int *n_readyp,
+ int clock_var ATTRIBUTE_UNUSED)
+{
+ if (reload_completed)
+ return sh_issue_rate ();
+
+ if (high_pressure (SFmode) || high_pressure (SImode))
+ {
+ ready_reorder (ready, *n_readyp);
+ }
+
+ return sh_issue_rate ();
+}
+
+/* Skip cycles if the current register pressure is high. */
+static int
+sh_reorder2 (FILE *dump ATTRIBUTE_UNUSED,
+ int sched_verbose ATTRIBUTE_UNUSED,
+ rtx *ready ATTRIBUTE_UNUSED,
+ int *n_readyp ATTRIBUTE_UNUSED,
+ int clock_var ATTRIBUTE_UNUSED)
+{
+ if (reload_completed)
+ return cached_can_issue_more;
+
+ if (high_pressure(SFmode) || high_pressure (SImode))
+ skip_cycles = 1;
+
+ return cached_can_issue_more;
+}
+
+/* Skip cycles without sorting the ready queue. This will move insn from
+ Q->R. If this is the last cycle we are skipping; allow sorting of ready
+ queue by sh_reorder. */
+
+/* Generally, skipping these many cycles are sufficient for all insns to move
+ from Q -> R. */
+#define MAX_SKIPS 8
+
+static int
+sh_dfa_new_cycle (FILE *sched_dump ATTRIBUTE_UNUSED,
+ int sched_verbose ATTRIBUTE_UNUSED,
+ rtx insn ATTRIBUTE_UNUSED,
+ int last_clock_var,
+ int clock_var,
+ int *sort_p)
+{
+ if (reload_completed)
+ return 0;
+
+ if (skip_cycles)
+ {
+ if ((clock_var - last_clock_var) < MAX_SKIPS)
+ {
+ *sort_p = 0;
+ return 1;
+ }
+ /* If this is the last cycle we are skipping, allow reordering of R. */
+ if ((clock_var - last_clock_var) == MAX_SKIPS)
+ {
+ *sort_p = 1;
+ return 1;
+ }
+ }
+
+ skip_cycles = 0;
+
+ return 0;
+}
+
/* SHmedia requires registers for branches, so we can't generate new
branches past reload. */
static bool
-sh_cannot_modify_jumps_p ()
+sh_cannot_modify_jumps_p (void)
{
return (TARGET_SHMEDIA && (reload_in_progress || reload_completed));
}
+static int
+sh_target_reg_class (void)
+{
+ return TARGET_SHMEDIA ? TARGET_REGS : NO_REGS;
+}
+
static bool
-sh_ms_bitfield_layout_p (record_type)
- tree record_type ATTRIBUTE_UNUSED;
+sh_optimize_target_register_callee_saved (bool after_prologue_epilogue_gen)
{
- return TARGET_SH5;
+ return (shmedia_space_reserved_for_target_registers
+ && (! after_prologue_epilogue_gen || TARGET_SAVE_ALL_TARGET_REGS));
+}
+
+static bool
+sh_ms_bitfield_layout_p (tree record_type ATTRIBUTE_UNUSED)
+{
+ return (TARGET_SH5 || TARGET_HITACHI || sh_attr_renesas_p (record_type));
}
\f
/*
CXT is an RTX for the static chain value for the function. */
void
-sh_initialize_trampoline (tramp, fnaddr, cxt)
- rtx tramp, fnaddr, cxt;
+sh_initialize_trampoline (rtx tramp, rtx fnaddr, rtx cxt)
{
if (TARGET_SHMEDIA64)
{
movishori));
emit_insn (gen_rotrdi3_mextr (quad0, quad0,
GEN_INT (TARGET_LITTLE_ENDIAN ? 24 : 56)));
- emit_insn (gen_ashldi3_media (quad0, quad0, GEN_INT (2)));
+ emit_insn (gen_ashldi3_media (quad0, quad0, const2_rtx));
emit_move_insn (gen_rtx_MEM (DImode, tramp), quad0);
emit_insn (gen_mshflo_w_x (gen_rtx_SUBREG (V4HImode, cxtload, 0),
gen_rtx_SUBREG (V2HImode, cxt, 0),
movishori));
emit_insn (gen_rotrdi3_mextr (cxtload, cxtload,
GEN_INT (TARGET_LITTLE_ENDIAN ? 24 : 56)));
- emit_insn (gen_ashldi3_media (cxtload, cxtload, GEN_INT (2)));
+ emit_insn (gen_ashldi3_media (cxtload, cxtload, const2_rtx));
if (TARGET_LITTLE_ENDIAN)
{
emit_insn (gen_mshflo_l_di (quad1, ptabs, cxtload));
own stack frame, so it must not pass pointers or references to
these arguments to other functions by means of sibling calls. */
static bool
-sh_function_ok_for_sibcall (decl, exp)
- tree decl;
- tree exp ATTRIBUTE_UNUSED;
+sh_function_ok_for_sibcall (tree decl, tree exp ATTRIBUTE_UNUSED)
{
return (decl
&& (! TARGET_SHCOMPACT
#define SH_BLTIN_PV 20
{ 0, 8 },
};
-/* mcmv: operands considered unsigned. */
+/* mcmv: operands considered unsigned. */
/* mmulsum_wq, msad_ubq: result considered unsigned long long. */
-/* mperm: control value considered unsigned int. */
-/* mshalds, mshard, mshards, mshlld, mshlrd: shift count is unsigned int. */
+/* mperm: control value considered unsigned int. */
+/* mshalds, mshard, mshards, mshlld, mshlrd: shift count is unsigned int. */
/* mshards_q: returns signed short. */
/* nsb: takes long long arg, returns unsigned char. */
static const struct builtin_description bdesc[] =
};
static void
-sh_media_init_builtins ()
+sh_media_init_builtins (void)
{
tree shared[SH_BLTIN_NUM_SHARED_SIGNATURES];
const struct builtin_description *d;
memset (shared, 0, sizeof shared);
- for (d = bdesc; d - bdesc < (int) (sizeof bdesc / sizeof bdesc[0]); d++)
+ for (d = bdesc; d - bdesc < (int) ARRAY_SIZE (bdesc); d++)
{
tree type, arg_type;
int signature = d->signature;
}
static void
-sh_init_builtins ()
+sh_init_builtins (void)
{
if (TARGET_SHMEDIA)
sh_media_init_builtins ();
IGNORE is nonzero if the value is to be ignored. */
static rtx
-sh_expand_builtin (exp, target, subtarget, mode, ignore)
- tree exp;
- rtx target;
- rtx subtarget ATTRIBUTE_UNUSED;
- enum machine_mode mode ATTRIBUTE_UNUSED;
- int ignore;
+sh_expand_builtin (tree exp, rtx target, rtx subtarget ATTRIBUTE_UNUSED,
+ enum machine_mode mode ATTRIBUTE_UNUSED, int ignore)
{
tree fndecl = TREE_OPERAND (TREE_OPERAND (exp, 0), 0);
tree arglist = TREE_OPERAND (exp, 1);
}
void
-sh_expand_unop_v2sf (code, op0, op1)
- enum rtx_code code;
- rtx op0, op1;
+sh_expand_unop_v2sf (enum rtx_code code, rtx op0, rtx op1)
{
rtx sel0 = const0_rtx;
rtx sel1 = const1_rtx;
- rtx (*fn) PARAMS ((rtx, rtx, rtx, rtx, rtx)) = gen_unary_sf_op;
+ rtx (*fn) (rtx, rtx, rtx, rtx, rtx) = gen_unary_sf_op;
rtx op = gen_rtx_fmt_e (code, SFmode, op1);
emit_insn ((*fn) (op0, op1, op, sel0, sel0));
}
void
-sh_expand_binop_v2sf (code, op0, op1, op2)
- enum rtx_code code;
- rtx op0, op1, op2;
+sh_expand_binop_v2sf (enum rtx_code code, rtx op0, rtx op1, rtx op2)
{
rtx sel0 = const0_rtx;
rtx sel1 = const1_rtx;
- rtx (*fn) PARAMS ((rtx, rtx, rtx, rtx, rtx, rtx, rtx, rtx))
+ rtx (*fn) (rtx, rtx, rtx, rtx, rtx, rtx, rtx, rtx)
= gen_binary_sf_op;
rtx op = gen_rtx_fmt_ee (code, SFmode, op1, op2);
/* Return the class of registers for which a mode change from FROM to TO
is invalid. */
bool
-sh_cannot_change_mode_class (from, to, class)
- enum machine_mode from, to;
- enum reg_class class;
+sh_cannot_change_mode_class (enum machine_mode from, enum machine_mode to,
+ enum reg_class class)
{
if (GET_MODE_SIZE (from) != GET_MODE_SIZE (to))
{
- if (TARGET_LITTLE_ENDIAN)
- {
- if (GET_MODE_SIZE (to) < 8 || GET_MODE_SIZE (from) < 8)
- return reg_classes_intersect_p (DF_REGS, class);
- }
- else
- {
- if (GET_MODE_SIZE (from) < 8)
- return reg_classes_intersect_p (DF_HI_REGS, class);
- }
+ if (TARGET_LITTLE_ENDIAN)
+ {
+ if (GET_MODE_SIZE (to) < 8 || GET_MODE_SIZE (from) < 8)
+ return reg_classes_intersect_p (DF_REGS, class);
+ }
+ else
+ {
+ if (GET_MODE_SIZE (from) < 8)
+ return reg_classes_intersect_p (DF_HI_REGS, class);
+ }
}
return 0;
}
that label is used. */
void
-sh_mark_label (address, nuses)
- rtx address;
- int nuses;
+sh_mark_label (rtx address, int nuses)
{
if (GOTOFF_P (address))
{
register information here is not used for SFmode. */
int
-sh_register_move_cost (mode, srcclass, dstclass)
- enum machine_mode mode;
- enum reg_class srcclass, dstclass;
+sh_register_move_cost (enum machine_mode mode,
+ enum reg_class srcclass, enum reg_class dstclass)
{
if (dstclass == T_REGS || dstclass == PR_REGS)
return 10;
+ if (dstclass == MAC_REGS && srcclass == MAC_REGS)
+ return 4;
+
if (mode == SImode && ! TARGET_SHMEDIA && TARGET_FMOVD
&& REGCLASS_HAS_FP_REG (srcclass)
&& REGCLASS_HAS_FP_REG (dstclass))
return 4;
if ((REGCLASS_HAS_FP_REG (dstclass) && srcclass == MAC_REGS)
- || (dstclass== MAC_REGS && REGCLASS_HAS_FP_REG (srcclass)))
+ || (dstclass == MAC_REGS && REGCLASS_HAS_FP_REG (srcclass)))
return 9;
if ((REGCLASS_HAS_FP_REG (dstclass)
&& REGCLASS_HAS_GENERAL_REG (srcclass))
|| (REGCLASS_HAS_GENERAL_REG (dstclass)
&& REGCLASS_HAS_FP_REG (srcclass)))
- return ((TARGET_SHMEDIA ? 4 : TARGET_FMOVD ? 8 : 12)
- * ((GET_MODE_SIZE (mode) + 7) / 8U));
+ return ((TARGET_SHMEDIA ? 4 : TARGET_FMOVD ? 8 : 12)
+ * ((GET_MODE_SIZE (mode) + 7) / 8U));
if ((dstclass == FPUL_REGS
&& REGCLASS_HAS_GENERAL_REG (srcclass))
/* Like register_operand, but take into account that SHMEDIA can use
the constant zero like a general register. */
int
-sh_register_operand (op, mode)
- rtx op;
- enum machine_mode mode;
+sh_register_operand (rtx op, enum machine_mode mode)
{
if (op == CONST0_RTX (mode) && TARGET_SHMEDIA)
return 1;
return register_operand (op, mode);
}
-static rtx emit_load_ptr PARAMS ((rtx, rtx));
+int
+cmpsi_operand (rtx op, enum machine_mode mode)
+{
+ if (GET_CODE (op) == REG && REGNO (op) == T_REG
+ && GET_MODE (op) == SImode)
+ return 1;
+ return arith_operand (op, mode);
+}
+
+static rtx emit_load_ptr (rtx, rtx);
static rtx
-emit_load_ptr (reg, addr)
- rtx reg, addr;
+emit_load_ptr (rtx reg, rtx addr)
{
rtx mem = gen_rtx_MEM (ptr_mode, addr);
}
void
-sh_output_mi_thunk (file, thunk_fndecl, delta, vcall_offset, function)
- FILE *file;
- tree thunk_fndecl ATTRIBUTE_UNUSED;
- HOST_WIDE_INT delta;
- HOST_WIDE_INT vcall_offset;
- tree function;
+sh_output_mi_thunk (FILE *file, tree thunk_fndecl ATTRIBUTE_UNUSED,
+ HOST_WIDE_INT delta, HOST_WIDE_INT vcall_offset,
+ tree function)
{
CUMULATIVE_ARGS cum;
int structure_value_byref = 0;
rtx this, this_value, sibcall, insns, funexp;
tree funtype = TREE_TYPE (function);
- int simple_add
- = (TARGET_SHMEDIA ? CONST_OK_FOR_J (delta) : CONST_OK_FOR_I (delta));
+ int simple_add = CONST_OK_FOR_ADD (delta);
int did_load = 0;
rtx scratch0, scratch1, scratch2;
reload_completed = 1;
+ epilogue_completed = 1;
no_new_pseudos = 1;
current_function_uses_only_leaf_regs = 1;
- emit_note (NULL, NOTE_INSN_PROLOGUE_END);
+ emit_note (NOTE_INSN_PROLOGUE_END);
/* Find the "this" pointer. We have such a wide range of ABIs for the
SH that it's best to do this completely machine independently.
"this" is passed as first argument, unless a structure return pointer
comes first, in which case "this" comes second. */
- INIT_CUMULATIVE_ARGS (cum, funtype, NULL_RTX, 0);
+ INIT_CUMULATIVE_ARGS (cum, funtype, NULL_RTX, 0, 1);
#ifndef PCC_STATIC_STRUCT_RETURN
- if (aggregate_value_p (TREE_TYPE (TREE_TYPE (function))))
+ if (aggregate_value_p (TREE_TYPE (TREE_TYPE (function)), function))
structure_value_byref = 1;
#endif /* not PCC_STATIC_STRUCT_RETURN */
- if (structure_value_byref && struct_value_rtx == 0)
+ if (structure_value_byref && sh_struct_value_rtx (function, 0) == 0)
{
tree ptype = build_pointer_type (TREE_TYPE (funtype));
emit_move_insn (scratch1, GEN_INT (vcall_offset));
offset_addr = gen_rtx_PLUS (Pmode, scratch0, scratch1);
}
- else if (TARGET_SHMEDIA
- ? CONST_OK_FOR_J (vcall_offset)
- : CONST_OK_FOR_I (vcall_offset))
+ else if (CONST_OK_FOR_ADD (vcall_offset))
{
emit_insn (gen_add2_insn (scratch0, GEN_INT (vcall_offset)));
offset_addr = scratch0;
abort (); /* FIXME */
emit_load_ptr (scratch0, offset_addr);
- if (Pmode != ptr_mode)
+ if (Pmode != ptr_mode)
scratch0 = gen_rtx_TRUNCATE (ptr_mode, scratch0);
emit_insn (gen_add2_insn (this, scratch0));
}
if (optimize > 0 && flag_schedule_insns_after_reload)
{
-
- find_basic_blocks (insns, max_reg_num (), rtl_dump_file);
- life_analysis (insns, rtl_dump_file, PROP_FINAL);
+ find_basic_blocks (insns, max_reg_num (), dump_file);
+ life_analysis (insns, dump_file, PROP_FINAL);
split_all_insns (1);
- schedule_insns (rtl_dump_file);
+ schedule_insns (dump_file);
}
sh_reorg ();
if (optimize > 0 && flag_delayed_branch)
- dbr_schedule (insns, rtl_dump_file);
+ dbr_schedule (insns, dump_file);
shorten_branches (insns);
final_start_function (insns, file, 1);
final (insns, file, 1, 0);
}
reload_completed = 0;
+ epilogue_completed = 0;
no_new_pseudos = 0;
}
return sym;
}
+/* Find the number of a general purpose register in S. */
+static int
+scavenge_reg (HARD_REG_SET *s)
+{
+ int r;
+ for (r = FIRST_GENERAL_REG; r <= LAST_GENERAL_REG; r++)
+ if (TEST_HARD_REG_BIT (*s, r))
+ return r;
+ return -1;
+}
+
+rtx
+sh_get_pr_initial_val (void)
+{
+ rtx val;
+
+ /* ??? Unfortunately, get_hard_reg_initial_val doesn't always work for the
+ PR register on SHcompact, because it might be clobbered by the prologue.
+ We check first if that is known to be the case. */
+ if (TARGET_SHCOMPACT
+ && ((current_function_args_info.call_cookie
+ & ~ CALL_COOKIE_RET_TRAMP (1))
+ || current_function_has_nonlocal_label))
+ return gen_rtx_MEM (SImode, return_address_pointer_rtx);
+
+ /* If we haven't finished rtl generation, there might be a nonlocal label
+ that we haven't seen yet.
+ ??? get_hard_reg_initial_val fails if it is called while no_new_pseudos
+ is set, unless it has been called before for the same register. And even
+ then, we end in trouble if we didn't use the register in the same
+ basic block before. So call get_hard_reg_initial_val now and wrap it
+ in an unspec if we might need to replace it. */
+ /* ??? We also must do this for TARGET_SH1 in general, because otherwise
+ combine can put the pseudo returned by get_hard_reg_initial_val into
+ instructions that need a general purpose registers, which will fail to
+ be recognized when the pseudo becomes allocated to PR. */
+ val
+ = get_hard_reg_initial_val (Pmode, TARGET_SHMEDIA ? PR_MEDIA_REG : PR_REG);
+ if (TARGET_SH1)
+ return gen_rtx_UNSPEC (SImode, gen_rtvec (1, val), UNSPEC_RA);
+ return val;
+}
+
+int
+sh_expand_t_scc (enum rtx_code code, rtx target)
+{
+ rtx result = target;
+ HOST_WIDE_INT val;
+
+ if (GET_CODE (sh_compare_op0) != REG || REGNO (sh_compare_op0) != T_REG
+ || GET_CODE (sh_compare_op1) != CONST_INT)
+ return 0;
+ if (GET_CODE (result) != REG)
+ result = gen_reg_rtx (SImode);
+ val = INTVAL (sh_compare_op1);
+ if ((code == EQ && val == 1) || (code == NE && val == 0))
+ emit_insn (gen_movt (result));
+ else if ((code == EQ && val == 0) || (code == NE && val == 1))
+ {
+ emit_insn (gen_rtx_CLOBBER (VOIDmode, result));
+ emit_insn (gen_subc (result, result, result));
+ emit_insn (gen_addsi3 (result, result, const1_rtx));
+ }
+ else if (code == EQ || code == NE)
+ emit_insn (gen_move_insn (result, GEN_INT (code == NE)));
+ else
+ return 0;
+ if (result != target)
+ emit_move_insn (target, result);
+ return 1;
+}
+
+/* INSN is an sfunc; return the rtx that describes the address used. */
+static rtx
+extract_sfunc_addr (rtx insn)
+{
+ rtx pattern, part = NULL_RTX;
+ int len, i;
+
+ pattern = PATTERN (insn);
+ len = XVECLEN (pattern, 0);
+ for (i = 0; i < len; i++)
+ {
+ part = XVECEXP (pattern, 0, i);
+ if (GET_CODE (part) == USE && GET_MODE (XEXP (part, 0)) == Pmode
+ && GENERAL_REGISTER_P (true_regnum (XEXP (part, 0))))
+ return XEXP (part, 0);
+ }
+ if (GET_CODE (XVECEXP (pattern, 0, 0)) == UNSPEC_VOLATILE)
+ return XVECEXP (XVECEXP (pattern, 0, 0), 0, 1);
+ abort ();
+}
+
+/* Verify that the register in use_sfunc_addr still agrees with the address
+ used in the sfunc. This prevents fill_slots_from_thread from changing
+ use_sfunc_addr.
+ INSN is the use_sfunc_addr instruction, and REG is the register it
+ guards. */
+int
+check_use_sfunc_addr (rtx insn, rtx reg)
+{
+ /* Search for the sfunc. It should really come right after INSN. */
+ while ((insn = NEXT_INSN (insn)))
+ {
+ if (GET_CODE (insn) == CODE_LABEL || GET_CODE (insn) == JUMP_INSN)
+ break;
+ if (! INSN_P (insn))
+ continue;
+
+ if (GET_CODE (PATTERN (insn)) == SEQUENCE)
+ insn = XVECEXP (PATTERN (insn), 0, 0);
+ if (GET_CODE (PATTERN (insn)) != PARALLEL
+ || get_attr_type (insn) != TYPE_SFUNC)
+ continue;
+ return rtx_equal_p (extract_sfunc_addr (insn), reg);
+ }
+ abort ();
+}
+
#include "gt-sh.h"
OSDN Git Service
