/* Definitions of target machine for GNU compiler, for IBM RS/6000.
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+ 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
Contributed by Richard Kenner (kenner@vlsi1.ultra.nyu.edu)
This file is part of GCC.
#define TARGET_AIX 0
#endif
+/* Control whether function entry points use a "dot" symbol when
+ ABI_AIX. */
+#define DOT_SYMBOLS 1
+
/* Default string to use for cpu if not specified. */
#ifndef TARGET_CPU_DEFAULT
#define TARGET_CPU_DEFAULT ((char *)0)
#define HAVE_AS_TLS 0
#endif
+/* Return 1 for a symbol ref for a thread-local storage symbol. */
+#define RS6000_SYMBOL_REF_TLS_P(RTX) \
+ (GET_CODE (RTX) == SYMBOL_REF && SYMBOL_REF_TLS_MODEL (RTX) != 0)
+
#ifdef IN_LIBGCC2
/* For libgcc2 we make sure this is a compile time constant */
#if defined (__64BIT__) || defined (__powerpc64__)
#define TARGET_POWERPC64 (target_flags & MASK_POWERPC64)
#endif
-#define TARGET_XL_CALL 0
+#define TARGET_XL_COMPAT 0
/* Run-time compilation parameters selecting different hardware subsets.
Override the macro definitions when compiling libobjc to avoid undefined
reference to rs6000_alignment_flags due to library's use of GCC alignment
macros which use the macros below. */
-
+
#ifndef IN_TARGET_LIBS
#define MASK_ALIGN_POWER 0x00000000
#define MASK_ALIGN_NATURAL 0x00000001
#define TARGET_E500 0
#define TARGET_ISEL 0
#define TARGET_FPRS 1
+#define TARGET_E500_SINGLE 0
+#define TARGET_E500_DOUBLE 0
/* Sometimes certain combinations of command options do not make sense
on a particular target machine. You can define a macro
that the object would ordinarily have. */
#define LOCAL_ALIGNMENT(TYPE, ALIGN) \
((TARGET_ALTIVEC && TREE_CODE (TYPE) == VECTOR_TYPE) ? 128 : \
+ (TARGET_E500_DOUBLE && TYPE_MODE (TYPE) == DFmode) ? 64 : \
(TARGET_SPE && TREE_CODE (TYPE) == VECTOR_TYPE) ? 64 : ALIGN)
/* Alignment of field after `int : 0' in a structure. */
store_bit_field() will force (subreg:DI (reg:V2SI x))'s to the
back-end. Because a single GPR can hold a V2SI, but not a DI, the
best thing to do is set structs to BLKmode and avoid Severe Tire
- Damage. */
+ Damage.
+
+ On e500 v2, DF and DI modes suffer from the same anomaly. DF can
+ fit into 1, whereas DI still needs two. */
#define MEMBER_TYPE_FORCES_BLK(FIELD, MODE) \
- (TARGET_SPE && TREE_CODE (TREE_TYPE (FIELD)) == VECTOR_TYPE)
+ ((TARGET_SPE && TREE_CODE (TREE_TYPE (FIELD)) == VECTOR_TYPE) \
+ || (TARGET_E500_DOUBLE && (MODE) == DFmode))
/* A bit-field declared as `int' forces `int' alignment for the struct. */
#define PCC_BITFIELD_TYPE_MATTERS 1
: (ALIGN))
/* Make arrays of chars word-aligned for the same reasons.
- Align vectors to 128 bits. */
+ Align vectors to 128 bits. Align SPE vectors and E500 v2 doubles to
+ 64 bits. */
#define DATA_ALIGNMENT(TYPE, ALIGN) \
(TREE_CODE (TYPE) == VECTOR_TYPE ? (TARGET_SPE_ABI ? 64 : 128) \
+ : (TARGET_E500_DOUBLE && TYPE_MODE (TYPE) == DFmode) ? 64 \
: TREE_CODE (TYPE) == ARRAY_TYPE \
&& TYPE_MODE (TREE_TYPE (TYPE)) == QImode \
&& (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN))
avoid invalidating older SPE eh_frame info.
We must map them here to avoid huge unwinder tables mostly consisting
- of unused space. */
+ of unused space. */
#define DWARF_REG_TO_UNWIND_COLUMN(r) \
((r) > 1200 ? ((r) - 1200 + FIRST_PSEUDO_REGISTER) : (r))
(`CALL_USED_REGISTERS' must be a superset of `FIXED_REGISTERS').
This macro is optional. If not specified, it defaults to the value
of `CALL_USED_REGISTERS'. */
-
+
#define CALL_REALLY_USED_REGISTERS \
{1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, FIXED_R13, 0, 0, \
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
#define SPE_ACC_REGNO 111
#define SPEFSCR_REGNO 112
+#define FIRST_SAVED_ALTIVEC_REGNO (FIRST_ALTIVEC_REGNO+20)
+#define FIRST_SAVED_FP_REGNO (14+32)
+#define FIRST_SAVED_GP_REGNO 13
+
/* List the order in which to allocate registers. Each register must be
listed once, even those in FIXED_REGISTERS.
fp0 (not saved or used for anything)
fp13 - fp2 (not saved; incoming fp arg registers)
fp1 (not saved; return value)
- fp31 - fp14 (saved; order given to save least number)
+ fp31 - fp14 (saved; order given to save least number)
cr7, cr6 (not saved or special)
cr1 (not saved, but used for FP operations)
cr0 (not saved, but used for arithmetic operations)
cr4, cr3, cr2 (saved)
- r0 (not saved; cannot be base reg)
+ r0 (not saved; cannot be base reg)
r9 (not saved; best for TImode)
r11, r10, r8-r4 (not saved; highest used first to make less conflict)
- r3 (not saved; return value register)
+ r3 (not saved; return value register)
r31 - r13 (saved; order given to save least number)
r12 (not saved; if used for DImode or DFmode would use r13)
mq (not saved; best to use it if we can)
ctr (not saved; when we have the choice ctr is better)
lr (saved)
- cr5, r1, r2, ap, xer, vrsave, vscr (fixed)
+ cr5, r1, r2, ap, xer (fixed)
+ v0 - v1 (not saved or used for anything)
+ v13 - v3 (not saved; incoming vector arg registers)
+ v2 (not saved; incoming vector arg reg; return value)
+ v19 - v14 (not saved or used for anything)
+ v31 - v20 (saved; order given to save least number)
+ vrsave, vscr (fixed)
spe_acc, spefscr (fixed)
-
- AltiVec registers:
- v0 - v1 (not saved or used for anything)
- v13 - v3 (not saved; incoming vector arg registers)
- v2 (not saved; incoming vector arg reg; return value)
- v19 - v14 (not saved or used for anything)
- v31 - v20 (saved; order given to save least number)
*/
-
+
#if FIXED_R2 == 1
#define MAYBE_R2_AVAILABLE
#define MAYBE_R2_FIXED 2,
#define MAYBE_R2_FIXED
#endif
-#define REG_ALLOC_ORDER \
- {32, \
- 45, 44, 43, 42, 41, 40, 39, 38, 37, 36, 35, 34, \
- 33, \
- 63, 62, 61, 60, 59, 58, 57, 56, 55, 54, 53, 52, 51, \
- 50, 49, 48, 47, 46, \
- 75, 74, 69, 68, 72, 71, 70, \
- 0, MAYBE_R2_AVAILABLE \
- 9, 11, 10, 8, 7, 6, 5, 4, \
- 3, \
- 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, \
- 18, 17, 16, 15, 14, 13, 12, \
- 64, 66, 65, \
- 73, 1, MAYBE_R2_FIXED 67, 76, \
- /* AltiVec registers. */ \
- 77, 78, \
- 90, 89, 88, 87, 86, 85, 84, 83, 82, 81, 80, \
- 79, \
- 96, 95, 94, 93, 92, 91, \
- 108, 107, 106, 105, 104, 103, 102, 101, 100, 99, 98, \
- 97, 109, 110 \
- , 111, 112 \
+#define REG_ALLOC_ORDER \
+ {32, \
+ 45, 44, 43, 42, 41, 40, 39, 38, 37, 36, 35, 34, \
+ 33, \
+ 63, 62, 61, 60, 59, 58, 57, 56, 55, 54, 53, 52, 51, \
+ 50, 49, 48, 47, 46, \
+ 75, 74, 69, 68, 72, 71, 70, \
+ 0, MAYBE_R2_AVAILABLE \
+ 9, 11, 10, 8, 7, 6, 5, 4, \
+ 3, \
+ 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, \
+ 18, 17, 16, 15, 14, 13, 12, \
+ 64, 66, 65, \
+ 73, 1, MAYBE_R2_FIXED 67, 76, \
+ /* AltiVec registers. */ \
+ 77, 78, \
+ 90, 89, 88, 87, 86, 85, 84, 83, 82, 81, 80, \
+ 79, \
+ 96, 95, 94, 93, 92, 91, \
+ 108, 107, 106, 105, 104, 103, 102, 101, 100, 99, 98, 97, \
+ 109, 110, \
+ 111, 112 \
}
/* True if register is floating-point. */
#define HARD_REGNO_CALL_PART_CLOBBERED(REGNO, MODE) \
((TARGET_32BIT && TARGET_POWERPC64 \
- && (MODE == DImode || MODE == DFmode) \
+ && (GET_MODE_SIZE (MODE) > 4) \
&& INT_REGNO_P (REGNO)) ? 1 : 0)
#define ALTIVEC_VECTOR_MODE(MODE) \
|| (MODE) == V1DImode \
|| (MODE) == V2SImode)
-/* Define this macro to be nonzero if the port is prepared to handle
- insns involving vector mode MODE. At the very least, it must have
- move patterns for this mode. */
-
-#define VECTOR_MODE_SUPPORTED_P(MODE) \
- ((TARGET_SPE && SPE_VECTOR_MODE (MODE)) \
- || (TARGET_ALTIVEC && ALTIVEC_VECTOR_MODE (MODE)))
+#define UNITS_PER_SIMD_WORD \
+ (TARGET_ALTIVEC ? 16 : (TARGET_SPE ? 8 : 0) )
/* Value is TRUE if hard register REGNO can hold a value of
machine-mode MODE. */
#define BRANCH_COST 3
/* Override BRANCH_COST heuristic which empirically produces worse
- performance for fold_range_test(). */
+ performance for removing short circuiting from the logical ops. */
-#define RANGE_TEST_NON_SHORT_CIRCUIT 0
+#define LOGICAL_OP_NON_SHORT_CIRCUIT 0
/* A fixed register used at prologue and epilogue generation to fix
addressing modes. The SPE needs heavy addressing fixes at the last
/* Get reg_class from a letter such as appears in the machine description. */
#define REG_CLASS_FROM_LETTER(C) \
- ((C) == 'f' ? FLOAT_REGS \
+ ((C) == 'f' ? ((TARGET_HARD_FLOAT && TARGET_FPRS) ? FLOAT_REGS : NO_REGS) \
: (C) == 'b' ? BASE_REGS \
: (C) == 'h' ? SPECIAL_REGS \
: (C) == 'q' ? MQ_REGS \
'T' is a constant that can be placed into a 32-bit mask operand
'U' is for V.4 small data references.
'W' is a vector constant that can be easily generated (no mem refs).
- 'Y' is a indexed or word-aligned displacement memory operand.
+ 'Y' is a indexed or word-aligned displacement memory operand.
+ 'Z' is an indexed or indirect memory operand.
't' is for AND masks that can be performed by two rldic{l,r} insns. */
#define EXTRA_CONSTRAINT(OP, C) \
&& !mask64_operand (OP, DImode)) \
: (C) == 'W' ? (easy_vector_constant (OP, GET_MODE (OP))) \
: (C) == 'Y' ? (word_offset_memref_operand (OP, GET_MODE (OP))) \
+ : (C) == 'Z' ? (indexed_or_indirect_operand (OP, GET_MODE (OP))) \
: 0)
/* Define which constraints are memory constraints. Tell reload
- that any memory address can be reloaded by copying the
+ that any memory address can be reloaded by copying the
memory address into a base register if required. */
#define EXTRA_MEMORY_CONSTRAINT(C, STR) \
- ((C) == 'Q' || (C) == 'Y')
+ ((C) == 'Q' || (C) == 'Y' || (C) == 'Z')
/* Given an rtx X being reloaded into a reg required to be
in class CLASS, return the class of reg to actually use.
in some cases it is preferable to use a more restrictive class.
On the RS/6000, we have to return NO_REGS when we want to reload a
- floating-point CONST_DOUBLE to force it to be copied to memory.
+ floating-point CONST_DOUBLE to force it to be copied to memory.
We also don't want to reload integer values into floating-point
registers if we can at all help it. In fact, this can
*/
#define PREFERRED_RELOAD_CLASS(X,CLASS) \
- (((GET_CODE (X) == CONST_DOUBLE \
- && GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT) \
- ? NO_REGS \
- : (GET_MODE_CLASS (GET_MODE (X)) == MODE_INT \
- && (CLASS) == NON_SPECIAL_REGS) \
- ? GENERAL_REGS \
- : (CLASS)))
+ ((CONSTANT_P (X) \
+ && reg_classes_intersect_p ((CLASS), FLOAT_REGS)) \
+ ? NO_REGS \
+ : (GET_MODE_CLASS (GET_MODE (X)) == MODE_INT \
+ && (CLASS) == NON_SPECIAL_REGS) \
+ ? GENERAL_REGS \
+ : (CLASS))
/* Return the register class of a scratch register needed to copy IN into
or out of a register in CLASS in MODE. If it can be done directly,
#define CLASS_MAX_NREGS(CLASS, MODE) \
(((CLASS) == FLOAT_REGS) \
? ((GET_MODE_SIZE (MODE) + UNITS_PER_FP_WORD - 1) / UNITS_PER_FP_WORD) \
+ : (TARGET_E500_DOUBLE && (CLASS) == GENERAL_REGS && (MODE) == DFmode) \
+ ? 1 \
: ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD))
? 0 \
: GET_MODE_SIZE (FROM) != GET_MODE_SIZE (TO) \
? reg_classes_intersect_p (FLOAT_REGS, CLASS) \
+ : (TARGET_E500_DOUBLE && (((TO) == DFmode) + ((FROM) == DFmode)) == 1) \
+ ? reg_classes_intersect_p (GENERAL_REGS, CLASS) \
+ : (TARGET_E500_DOUBLE && (((TO) == DImode) + ((FROM) == DImode)) == 1) \
+ ? reg_classes_intersect_p (GENERAL_REGS, CLASS) \
: (TARGET_SPE && (SPE_VECTOR_MODE (FROM) + SPE_VECTOR_MODE (TO)) == 1) \
? reg_classes_intersect_p (GENERAL_REGS, CLASS) \
: 0)
#define CALL_LONG 0x00000008 /* always call indirect */
#define CALL_LIBCALL 0x00000010 /* libcall */
+/* We don't have prologue and epilogue functions to save/restore
+ everything for most ABIs. */
+#define WORLD_SAVE_P(INFO) 0
+
/* 1 if N is a possible register number for a function value
as seen by the caller.
On RS/6000, this is r3, fp1, and v2 (for AltiVec). */
#define FUNCTION_VALUE_REGNO_P(N) \
((N) == GP_ARG_RETURN \
- || ((N) == FP_ARG_RETURN && TARGET_HARD_FLOAT) \
+ || ((N) == FP_ARG_RETURN && TARGET_HARD_FLOAT && TARGET_FPRS) \
|| ((N) == ALTIVEC_ARG_RETURN && TARGET_ALTIVEC && TARGET_ALTIVEC_ABI))
/* 1 if N is a possible register number for function argument passing.
|| ((unsigned) (N) - ALTIVEC_ARG_MIN_REG < ALTIVEC_ARG_NUM_REG \
&& TARGET_ALTIVEC && TARGET_ALTIVEC_ABI) \
|| ((unsigned) (N) - FP_ARG_MIN_REG < FP_ARG_NUM_REG \
- && TARGET_HARD_FLOAT))
+ && TARGET_HARD_FLOAT && TARGET_FPRS))
\f
/* A C structure for machine-specific, per-function data.
This is added to the cfun structure. */
typedef struct machine_function GTY(())
{
- /* Whether a System V.4 varargs area was created. */
- int sysv_varargs_p;
/* Flags if __builtin_return_address (n) with n >= 1 was used. */
int ra_needs_full_frame;
/* Some local-dynamic symbol. */
int stdarg; /* Whether function is a stdarg function. */
int call_cookie; /* Do special things for this call */
int sysv_gregno; /* next available GP register */
+ int intoffset; /* running offset in struct (darwin64) */
+ int use_stack; /* any part of struct on stack (darwin64) */
+ int named; /* false for varargs params */
} CUMULATIVE_ARGS;
/* Initialize a variable CUM of type CUMULATIVE_ARGS
(TYPE is null for libcalls where that information may not be available.) */
#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
- function_arg_advance (&CUM, MODE, TYPE, NAMED)
+ function_arg_advance (&CUM, MODE, TYPE, NAMED, 0)
/* Determine where to put an argument to a function.
Value is zero to push the argument on the stack,
#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
function_arg (&CUM, MODE, TYPE, NAMED)
-/* For an arg passed partly in registers and partly in memory,
- this is the number of registers used.
- For args passed entirely in registers or entirely in memory, zero. */
-
-#define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \
- function_arg_partial_nregs (&CUM, MODE, TYPE, NAMED)
-
/* If defined, a C expression which determines whether, and in which
direction, to pad out an argument with extra space. The value
should be of type `enum direction': either `upward' to pad above
|| easy_vector_constant (X, GET_MODE (X))) \
&& !rs6000_tls_referenced_p (X))
+#define EASY_VECTOR_15(n) ((n) >= -16 && (n) <= 15)
+#define EASY_VECTOR_15_ADD_SELF(n) ((n) >= 0x10 && (n) <= 0x1e && !((n) & 1))
+
/* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
and check its validity for a certain class.
We have two alternate definitions for each of them.
operand. If we find one, push the reload and jump to WIN. This
macro is used in only one place: `find_reloads_address' in reload.c.
- Implemented on rs6000 by rs6000_legitimize_reload_address.
+ Implemented on rs6000 by rs6000_legitimize_reload_address.
Note that (X) is evaluated twice; this is safe in current usage. */
-
+
#define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_LEVELS,WIN) \
do { \
int win; \
/* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD
will either zero-extend or sign-extend. The value of this macro should
be the code that says which one of the two operations is implicitly
- done, NIL if none. */
+ done, UNKNOWN if none. */
#define LOAD_EXTEND_OP(MODE) ZERO_EXTEND
/* Define if loading short immediate values into registers sign extends. */
do \
{ \
fputs ("\t.weak\t", (FILE)); \
- RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
+ RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
if ((DECL) && TREE_CODE (DECL) == FUNCTION_DECL \
- && DEFAULT_ABI == ABI_AIX) \
+ && DEFAULT_ABI == ABI_AIX && DOT_SYMBOLS) \
{ \
if (TARGET_XCOFF) \
fputs ("[DS]", (FILE)); \
{ \
ASM_OUTPUT_DEF ((FILE), (NAME), (VAL)); \
if ((DECL) && TREE_CODE (DECL) == FUNCTION_DECL \
- && DEFAULT_ABI == ABI_AIX) \
+ && DEFAULT_ABI == ABI_AIX && DOT_SYMBOLS) \
{ \
fputs ("\t.set\t.", (FILE)); \
RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
const char *alias = XSTR (XEXP (DECL_RTL (DECL), 0), 0); \
const char *name = IDENTIFIER_POINTER (TARGET); \
if (TREE_CODE (DECL) == FUNCTION_DECL \
- && DEFAULT_ABI == ABI_AIX) \
+ && DEFAULT_ABI == ABI_AIX && DOT_SYMBOLS) \
{ \
if (TREE_PUBLIC (DECL)) \
{ \
#define PRINT_OPERAND_ADDRESS(FILE, ADDR) print_operand_address (FILE, ADDR)
-/* Define the codes that are matched by predicates in rs6000.c. */
-
-#define PREDICATE_CODES \
- {"any_operand", {CONST_INT, CONST_DOUBLE, CONST, SYMBOL_REF, \
- LABEL_REF, SUBREG, REG, MEM}}, \
- {"any_parallel_operand", {PARALLEL}}, \
- {"zero_constant", {CONST_INT, CONST_DOUBLE, CONST, SYMBOL_REF, \
- LABEL_REF, SUBREG, REG, MEM}}, \
- {"short_cint_operand", {CONST_INT}}, \
- {"u_short_cint_operand", {CONST_INT}}, \
- {"non_short_cint_operand", {CONST_INT}}, \
- {"exact_log2_cint_operand", {CONST_INT}}, \
- {"gpc_reg_operand", {SUBREG, REG}}, \
- {"cc_reg_operand", {SUBREG, REG}}, \
- {"cc_reg_not_cr0_operand", {SUBREG, REG}}, \
- {"reg_or_short_operand", {SUBREG, REG, CONST_INT}}, \
- {"reg_or_neg_short_operand", {SUBREG, REG, CONST_INT}}, \
- {"reg_or_aligned_short_operand", {SUBREG, REG, CONST_INT}}, \
- {"reg_or_u_short_operand", {SUBREG, REG, CONST_INT}}, \
- {"reg_or_cint_operand", {SUBREG, REG, CONST_INT}}, \
- {"reg_or_arith_cint_operand", {SUBREG, REG, CONST_INT}}, \
- {"reg_or_add_cint64_operand", {SUBREG, REG, CONST_INT}}, \
- {"reg_or_sub_cint64_operand", {SUBREG, REG, CONST_INT}}, \
- {"reg_or_logical_cint_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
- {"got_operand", {SYMBOL_REF, CONST, LABEL_REF}}, \
- {"got_no_const_operand", {SYMBOL_REF, LABEL_REF}}, \
- {"easy_fp_constant", {CONST_DOUBLE}}, \
- {"easy_vector_constant", {CONST_VECTOR}}, \
- {"easy_vector_constant_add_self", {CONST_VECTOR}}, \
- {"zero_fp_constant", {CONST_DOUBLE}}, \
- {"reg_or_mem_operand", {SUBREG, MEM, REG}}, \
- {"lwa_operand", {SUBREG, MEM, REG}}, \
- {"volatile_mem_operand", {MEM}}, \
- {"offsettable_mem_operand", {MEM}}, \
- {"mem_or_easy_const_operand", {SUBREG, MEM, CONST_DOUBLE}}, \
- {"add_operand", {SUBREG, REG, CONST_INT}}, \
- {"non_add_cint_operand", {CONST_INT}}, \
- {"and_operand", {SUBREG, REG, CONST_INT}}, \
- {"and64_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
- {"and64_2_operand", {SUBREG, REG, CONST_INT}}, \
- {"logical_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
- {"non_logical_cint_operand", {CONST_INT, CONST_DOUBLE}}, \
- {"mask_operand", {CONST_INT}}, \
- {"mask_operand_wrap", {CONST_INT}}, \
- {"mask64_operand", {CONST_INT}}, \
- {"mask64_2_operand", {CONST_INT}}, \
- {"count_register_operand", {REG}}, \
- {"xer_operand", {REG}}, \
- {"symbol_ref_operand", {SYMBOL_REF}}, \
- {"rs6000_tls_symbol_ref", {SYMBOL_REF}}, \
- {"call_operand", {SYMBOL_REF, REG}}, \
- {"current_file_function_operand", {SYMBOL_REF}}, \
- {"input_operand", {SUBREG, MEM, REG, CONST_INT, \
- CONST_DOUBLE, SYMBOL_REF}}, \
- {"load_multiple_operation", {PARALLEL}}, \
- {"store_multiple_operation", {PARALLEL}}, \
- {"lmw_operation", {PARALLEL}}, \
- {"stmw_operation", {PARALLEL}}, \
- {"vrsave_operation", {PARALLEL}}, \
- {"mfcr_operation", {PARALLEL}}, \
- {"mtcrf_operation", {PARALLEL}}, \
- {"branch_comparison_operator", {EQ, NE, LE, LT, GE, \
- GT, LEU, LTU, GEU, GTU, \
- UNORDERED, ORDERED, \
- UNGE, UNLE }}, \
- {"branch_positive_comparison_operator", {EQ, LT, GT, LTU, GTU, \
- UNORDERED }}, \
- {"scc_comparison_operator", {EQ, NE, LE, LT, GE, \
- GT, LEU, LTU, GEU, GTU, \
- UNORDERED, ORDERED, \
- UNGE, UNLE }}, \
- {"trap_comparison_operator", {EQ, NE, LE, LT, GE, \
- GT, LEU, LTU, GEU, GTU}}, \
- {"boolean_operator", {AND, IOR, XOR}}, \
- {"boolean_or_operator", {IOR, XOR}}, \
- {"altivec_register_operand", {REG}}, \
- {"min_max_operator", {SMIN, SMAX, UMIN, UMAX}},
-
/* uncomment for disabling the corresponding default options */
/* #define MACHINE_no_sched_interblock */
/* #define MACHINE_no_sched_speculative */
ALTIVEC_BUILTIN_ABS_V8HI,
ALTIVEC_BUILTIN_ABS_V16QI,
ALTIVEC_BUILTIN_COMPILETIME_ERROR,
+ ALTIVEC_BUILTIN_MASK_FOR_LOAD,
+ ALTIVEC_BUILTIN_MASK_FOR_STORE,
/* SPE builtins. */
SPE_BUILTIN_EVADDW,
OSDN Git Service
