/* Definitions of target machine for GNU compiler, for the HP Spectrum.
- Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
- 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+ 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
+ Free Software Foundation, Inc.
Contributed by Michael Tiemann (tiemann@cygnus.com) of Cygnus Support
and Tim Moore (moore@defmacro.cs.utah.edu) of the Center for
Software Science at the University of Utah.
GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
+the Free Software Foundation; either version 3, or (at your option)
any later version.
GCC is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
-enum cmp_type /* comparison type */
-{
- CMP_SI, /* compare integers */
- CMP_SF, /* compare single precision floats */
- CMP_DF, /* compare double precision floats */
- CMP_MAX /* max comparison type */
-};
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
/* For long call handling. */
extern unsigned long total_code_bytes;
-/* Which processor to schedule for. */
-
-enum processor_type
-{
- PROCESSOR_700,
- PROCESSOR_7100,
- PROCESSOR_7100LC,
- PROCESSOR_7200,
- PROCESSOR_7300,
- PROCESSOR_8000
-};
-
-/* For -mschedule= option. */
-extern const char *pa_cpu_string;
-extern enum processor_type pa_cpu;
-
#define pa_cpu_attr ((enum attr_cpu)pa_cpu)
-/* Which architecture to generate code for. */
-
-enum architecture_type
-{
- ARCHITECTURE_10,
- ARCHITECTURE_11,
- ARCHITECTURE_20
-};
-
-struct rtx_def;
-
-/* For -march= option. */
-extern const char *pa_arch_string;
-extern enum architecture_type pa_arch;
-
-/* Print subsidiary information on the compiler version in use. */
-
-#define TARGET_VERSION fputs (" (hppa)", stderr);
-
-/* Run-time compilation parameters selecting different hardware subsets. */
-
-extern int target_flags;
-
-/* compile code for HP-PA 1.1 ("Snake"). */
-
-#define MASK_PA_11 1
-
-/* Disable all FP registers (they all become fixed). This may be necessary
- for compiling kernels which perform lazy context switching of FP regs.
- Note if you use this option and try to perform floating point operations
- the compiler will abort! */
-
-#define MASK_DISABLE_FPREGS 2
-#define TARGET_DISABLE_FPREGS (target_flags & MASK_DISABLE_FPREGS)
-
-/* Generate code which assumes that all space register are equivalent.
- Triggers aggressive unscaled index addressing and faster
- builtin_return_address. */
-#define MASK_NO_SPACE_REGS 4
-#define TARGET_NO_SPACE_REGS (target_flags & MASK_NO_SPACE_REGS)
-
-/* Allow unconditional jumps in the delay slots of call instructions. */
-#define MASK_JUMP_IN_DELAY 8
-#define TARGET_JUMP_IN_DELAY (target_flags & MASK_JUMP_IN_DELAY)
-
-/* Disable indexed addressing modes. */
-#define MASK_DISABLE_INDEXING 32
-#define TARGET_DISABLE_INDEXING (target_flags & MASK_DISABLE_INDEXING)
-
-/* Emit code which follows the new portable runtime calling conventions
- HP wants everyone to use for ELF objects. If at all possible you want
- to avoid this since it's a performance loss for non-prototyped code.
+#define TARGET_PA_10 (!TARGET_PA_11 && !TARGET_PA_20)
- Note TARGET_PORTABLE_RUNTIME also forces all calls to use inline
- long-call stubs which is quite expensive. */
-#define MASK_PORTABLE_RUNTIME 64
-#define TARGET_PORTABLE_RUNTIME (target_flags & MASK_PORTABLE_RUNTIME)
-
-/* Emit directives only understood by GAS. This allows parameter
- relocations to work for static functions. There is no way
- to make them work the HP assembler at this time. */
-#define MASK_GAS 128
-#define TARGET_GAS (target_flags & MASK_GAS)
-
-/* Emit code for processors which do not have an FPU. */
-#define MASK_SOFT_FLOAT 256
-#define TARGET_SOFT_FLOAT (target_flags & MASK_SOFT_FLOAT)
-
-/* Use 3-insn load/store sequences for access to large data segments
- in shared libraries on hpux10. */
-#define MASK_LONG_LOAD_STORE 512
-#define TARGET_LONG_LOAD_STORE (target_flags & MASK_LONG_LOAD_STORE)
-
-/* Use a faster sequence for indirect calls. This assumes that calls
- through function pointers will never cross a space boundary, and
- that the executable is not dynamically linked. Such assumptions
- are generally safe for building kernels and statically linked
- executables. Code compiled with this option will fail miserably if
- the executable is dynamically linked or uses nested functions! */
-#define MASK_FAST_INDIRECT_CALLS 1024
-#define TARGET_FAST_INDIRECT_CALLS (target_flags & MASK_FAST_INDIRECT_CALLS)
-
-/* Generate code with big switch statements to avoid out of range branches
- occurring within the switch table. */
-#define MASK_BIG_SWITCH 2048
-#define TARGET_BIG_SWITCH (target_flags & MASK_BIG_SWITCH)
-
-/* Generate code for the HPPA 2.0 architecture. TARGET_PA_11 should also be
- true when this is true. */
-#define MASK_PA_20 4096
+/* Generate code for the HPPA 2.0 architecture in 64bit mode. */
+#ifndef TARGET_64BIT
+#define TARGET_64BIT 0
+#endif
-/* Generate cpp defines for server I/O. */
-#define MASK_SIO 8192
-#define TARGET_SIO (target_flags & MASK_SIO)
+/* Generate code for ELF32 ABI. */
+#ifndef TARGET_ELF32
+#define TARGET_ELF32 0
+#endif
-/* Assume GNU linker by default. */
-#define MASK_GNU_LD 16384
-#ifndef TARGET_GNU_LD
-#define TARGET_GNU_LD (target_flags & MASK_GNU_LD)
+/* Generate code for SOM 32bit ABI. */
+#ifndef TARGET_SOM
+#define TARGET_SOM 0
#endif
-/* Force generation of long calls. */
-#define MASK_LONG_CALLS 32768
-#ifndef TARGET_LONG_CALLS
-#define TARGET_LONG_CALLS (target_flags & MASK_LONG_CALLS)
+/* HP-UX UNIX features. */
+#ifndef TARGET_HPUX
+#define TARGET_HPUX 0
#endif
-#ifndef TARGET_PA_10
-#define TARGET_PA_10 (target_flags & (MASK_PA_11 | MASK_PA_20) == 0)
+/* HP-UX 10.10 UNIX 95 features. */
+#ifndef TARGET_HPUX_10_10
+#define TARGET_HPUX_10_10 0
#endif
-#ifndef TARGET_PA_11
-#define TARGET_PA_11 (target_flags & MASK_PA_11)
+/* HP-UX 11.* features (11.00, 11.11, 11.23, etc.) */
+#ifndef TARGET_HPUX_11
+#define TARGET_HPUX_11 0
#endif
-#ifndef TARGET_PA_20
-#define TARGET_PA_20 (target_flags & MASK_PA_20)
+/* HP-UX 11i multibyte and UNIX 98 extensions. */
+#ifndef TARGET_HPUX_11_11
+#define TARGET_HPUX_11_11 0
#endif
-/* Generate code for the HPPA 2.0 architecture in 64bit mode. */
-#ifndef TARGET_64BIT
-#define TARGET_64BIT 0
+/* HP-UX 11i multibyte and UNIX 2003 extensions. */
+#ifndef TARGET_HPUX_11_31
+#define TARGET_HPUX_11_31 0
#endif
-/* Generate code for ELF32 ABI. */
-#ifndef TARGET_ELF32
-#define TARGET_ELF32 0
+/* HP-UX long double library. */
+#ifndef HPUX_LONG_DOUBLE_LIBRARY
+#define HPUX_LONG_DOUBLE_LIBRARY 0
#endif
-/* Generate code for SOM 32bit ABI. */
-#ifndef TARGET_SOM
-#define TARGET_SOM 0
+/* Linux kernel atomic operation support. */
+#ifndef TARGET_SYNC_LIBCALL
+#define TARGET_SYNC_LIBCALL 0
#endif
/* The following three defines are potential target switches. The current
calls. They are used only in non-pic code. */
#define TARGET_LONG_ABS_CALL (TARGET_SOM && !TARGET_GAS)
-/* Define to a C expression evaluating to true to use long pic symbol
- difference calls. This is a call variant similar to the long pic
- pc-relative call. Long pic symbol difference calls are only used with
- the HP SOM linker. Currently, only the HP assembler supports these
- calls. GAS doesn't allow an arbitrary difference of two symbols. */
-#define TARGET_LONG_PIC_SDIFF_CALL (!TARGET_GAS)
-
-/* Define to a C expression evaluating to true to use long pic
- pc-relative calls. Long pic pc-relative calls are only used with
- GAS. Currently, they are usable for calls within a module but
- not for external calls. */
+/* Define to a C expression evaluating to true to use long PIC symbol
+ difference calls. Long PIC symbol difference calls are only used with
+ the HP assembler and linker. The HP assembler detects this instruction
+ sequence and treats it as long pc-relative call. Currently, GAS only
+ allows a difference of two symbols in the same subspace, and it doesn't
+ detect the sequence as a pc-relative call. */
+#define TARGET_LONG_PIC_SDIFF_CALL (!TARGET_GAS && TARGET_HPUX)
+
+/* Define to a C expression evaluating to true to use long PIC
+ pc-relative calls. Long PIC pc-relative calls are only used with
+ GAS. Currently, they are usable for calls which bind local to a
+ module but not for external calls. */
#define TARGET_LONG_PIC_PCREL_CALL 0
/* Define to a C expression evaluating to true to use SOM secondary
need to generate additional code to save SP into the frame marker. */
#define TARGET_HPUX_UNWIND_LIBRARY 0
-/* Macro to define tables used to set the flags. This is a
- list in braces of target switches with each switch being
- { "NAME", VALUE, "HELP_STRING" }. VALUE is the bits to set,
- or minus the bits to clear. An empty string NAME is used to
- identify the default VALUE. Do not mark empty strings for
- translation. */
-
-#define TARGET_SWITCHES \
- {{ "snake", MASK_PA_11, \
- N_("Generate PA1.1 code") }, \
- { "nosnake", -(MASK_PA_11 | MASK_PA_20), \
- N_("Generate PA1.0 code") }, \
- { "pa-risc-1-0", -(MASK_PA_11 | MASK_PA_20), \
- N_("Generate PA1.0 code") }, \
- { "pa-risc-1-1", MASK_PA_11, \
- N_("Generate PA1.1 code") }, \
- { "pa-risc-2-0", MASK_PA_20, \
- N_("Generate PA2.0 code (requires binutils 2.10 or later)") }, \
- { "disable-fpregs", MASK_DISABLE_FPREGS, \
- N_("Disable FP regs") }, \
- { "no-disable-fpregs", -MASK_DISABLE_FPREGS, \
- N_("Do not disable FP regs") }, \
- { "no-space-regs", MASK_NO_SPACE_REGS, \
- N_("Disable space regs") }, \
- { "space-regs", -MASK_NO_SPACE_REGS, \
- N_("Do not disable space regs") }, \
- { "jump-in-delay", MASK_JUMP_IN_DELAY, \
- N_("Put jumps in call delay slots") }, \
- { "no-jump-in-delay", -MASK_JUMP_IN_DELAY, \
- N_("Do not put jumps in call delay slots") }, \
- { "disable-indexing", MASK_DISABLE_INDEXING, \
- N_("Disable indexed addressing") }, \
- { "no-disable-indexing", -MASK_DISABLE_INDEXING, \
- N_("Do not disable indexed addressing") }, \
- { "portable-runtime", MASK_PORTABLE_RUNTIME, \
- N_("Use portable calling conventions") }, \
- { "no-portable-runtime", -MASK_PORTABLE_RUNTIME, \
- N_("Do not use portable calling conventions") }, \
- { "gas", MASK_GAS, \
- N_("Assume code will be assembled by GAS") }, \
- { "no-gas", -MASK_GAS, \
- N_("Do not assume code will be assembled by GAS") }, \
- { "soft-float", MASK_SOFT_FLOAT, \
- N_("Use software floating point") }, \
- { "no-soft-float", -MASK_SOFT_FLOAT, \
- N_("Do not use software floating point") }, \
- { "long-load-store", MASK_LONG_LOAD_STORE, \
- N_("Emit long load/store sequences") }, \
- { "no-long-load-store", -MASK_LONG_LOAD_STORE, \
- N_("Do not emit long load/store sequences") }, \
- { "fast-indirect-calls", MASK_FAST_INDIRECT_CALLS, \
- N_("Generate fast indirect calls") }, \
- { "no-fast-indirect-calls", -MASK_FAST_INDIRECT_CALLS, \
- N_("Do not generate fast indirect calls") }, \
- { "big-switch", MASK_BIG_SWITCH, \
- N_("Generate code for huge switch statements") }, \
- { "no-big-switch", -MASK_BIG_SWITCH, \
- N_("Do not generate code for huge switch statements") }, \
- { "long-calls", MASK_LONG_CALLS, \
- N_("Always generate long calls") }, \
- { "no-long-calls", -MASK_LONG_CALLS, \
- N_("Generate long calls only when needed") }, \
- { "linker-opt", 0, \
- N_("Enable linker optimizations") }, \
- SUBTARGET_SWITCHES \
- { "", TARGET_DEFAULT | TARGET_CPU_DEFAULT, \
- NULL }}
-
#ifndef TARGET_DEFAULT
#define TARGET_DEFAULT (MASK_GAS | MASK_JUMP_IN_DELAY | MASK_BIG_SWITCH)
#endif
#define TARGET_CPU_DEFAULT 0
#endif
-#ifndef SUBTARGET_SWITCHES
-#define SUBTARGET_SWITCHES
-#endif
-
#ifndef TARGET_SCHED_DEFAULT
-#define TARGET_SCHED_DEFAULT "8000"
+#define TARGET_SCHED_DEFAULT PROCESSOR_8000
#endif
-#define TARGET_OPTIONS \
-{ \
- { "schedule=", &pa_cpu_string, \
- N_("Specify CPU for scheduling purposes"), 0}, \
- { "arch=", &pa_arch_string, \
- N_("Specify architecture for code generation. Values are 1.0, 1.1, and 2.0. 2.0 requires gas snapshot 19990413 or later."), 0}\
-}
-
/* Support for a compile-time default CPU, et cetera. The rules are:
--with-schedule is ignored if -mschedule is specified.
--with-arch is ignored if -march is specified. */
and the old mnemonics are dialect zero. */
#define ASSEMBLER_DIALECT (TARGET_PA_20 ? 1 : 0)
-#define OVERRIDE_OPTIONS override_options ()
-
/* Override some settings from dbxelf.h. */
/* We do not have to be compatible with dbx, so we enable gdb extensions
#undef DBX_CONTIN_LENGTH
#define DBX_CONTIN_LENGTH 3000
-/* Only labels should ever begin in column zero. */
-#define ASM_STABS_OP "\t.stabs\t"
-#define ASM_STABN_OP "\t.stabn\t"
-
/* GDB always assumes the current function's frame begins at the value
of the stack pointer upon entry to the current function. Accessing
local variables and parameters passed on the stack is done using the
the stack pointer at the function's entry. Yuk! */
#define DEBUGGER_AUTO_OFFSET(X) \
((GET_CODE (X) == PLUS ? INTVAL (XEXP (X, 1)) : 0) \
- + (frame_pointer_needed ? 0 : compute_frame_size (get_frame_size (), 0)))
+ + (frame_pointer_needed ? 0 : pa_compute_frame_size (get_frame_size (), 0)))
#define DEBUGGER_ARG_OFFSET(OFFSET, X) \
((GET_CODE (X) == PLUS ? OFFSET : 0) \
- + (frame_pointer_needed ? 0 : compute_frame_size (get_frame_size (), 0)))
+ + (frame_pointer_needed ? 0 : pa_compute_frame_size (get_frame_size (), 0)))
#define TARGET_CPU_CPP_BUILTINS() \
do { \
#define LIB_SPEC "%{!p:%{!pg:-lc}}%{p:-lc_p}%{pg:-lc_p}"
#endif
-/* This macro defines command-line switches that modify the default
- target name.
-
- The definition is be an initializer for an array of structures. Each
- array element has have three elements: the switch name, one of the
- enumeration codes ADD or DELETE to indicate whether the string should be
- inserted or deleted, and the string to be inserted or deleted. */
-#define MODIFY_TARGET_NAME {{"-32", DELETE, "64"}, {"-64", ADD, "64"}}
-
/* Make gcc agree with <machine/ansi.h> */
#define SIZE_TYPE "unsigned int"
#define PTRDIFF_TYPE "int"
#define WCHAR_TYPE "unsigned int"
#define WCHAR_TYPE_SIZE 32
-
-/* Show we can debug even without a frame pointer. */
-#define CAN_DEBUG_WITHOUT_FP
\f
/* target machine storage layout */
+typedef struct GTY(()) machine_function
+{
+ /* Flag indicating that a .NSUBSPA directive has been output for
+ this function. */
+ int in_nsubspa;
+} machine_function;
/* Define this macro if it is advisable to hold scalars in registers
in a wider mode than that declared by the program. In such cases,
/* Width of a word, in units (bytes). */
#define UNITS_PER_WORD (TARGET_64BIT ? 8 : 4)
+
+/* Minimum number of units in a word. If this is undefined, the default
+ is UNITS_PER_WORD. Otherwise, it is the constant value that is the
+ smallest value that UNITS_PER_WORD can have at run-time.
+
+ FIXME: This needs to be 4 when TARGET_64BIT is true to suppress the
+ building of various TImode routines in libgcc. The HP runtime
+ specification doesn't provide the alignment requirements and calling
+ conventions for TImode variables. */
#define MIN_UNITS_PER_WORD 4
+/* The widest floating point format supported by the hardware. Note that
+ setting this influences some Ada floating point type sizes, currently
+ required for GNAT to operate properly. */
+#define WIDEST_HARDWARE_FP_SIZE 64
+
/* Allocation boundary (in *bits*) for storing arguments in argument list. */
#define PARM_BOUNDARY BITS_PER_WORD
#define BIGGEST_ALIGNMENT (2 * BITS_PER_WORD)
/* Get around hp-ux assembler bug, and make strcpy of constants fast. */
-#define CONSTANT_ALIGNMENT(CODE, TYPEALIGN) \
- ((TYPEALIGN) < 32 ? 32 : (TYPEALIGN))
+#define CONSTANT_ALIGNMENT(EXP, ALIGN) \
+ (TREE_CODE (EXP) == STRING_CST \
+ && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN))
/* Make arrays of chars word-aligned for the same reasons. */
#define DATA_ALIGNMENT(TYPE, ALIGN) \
when given unaligned data. */
#define STRICT_ALIGNMENT 1
-/* Generate calls to memcpy, memcmp and memset. */
-#define TARGET_MEM_FUNCTIONS
-
/* Value is 1 if it is a good idea to tie two pseudo registers
when one has mode MODE1 and one has mode MODE2.
If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
for any hard reg, then this must be 0 for correct output. */
#define MODES_TIEABLE_P(MODE1, MODE2) \
- (GET_MODE_CLASS (MODE1) == GET_MODE_CLASS (MODE2))
+ pa_modes_tieable_p (MODE1, MODE2)
/* Specify the registers used for certain standard purposes.
The values of these macros are register numbers. */
/* Register to use for pushing function arguments. */
#define STACK_POINTER_REGNUM 30
-/* Base register for access to local variables of the function. */
-#define FRAME_POINTER_REGNUM 3
+/* Fixed register for local variable access. Always eliminated. */
+#define FRAME_POINTER_REGNUM (TARGET_64BIT ? 61 : 89)
-/* Value should be nonzero if functions must have frame pointers. */
-#define FRAME_POINTER_REQUIRED \
- (current_function_calls_alloca)
+/* Base register for access to local variables of the function. */
+#define HARD_FRAME_POINTER_REGNUM 3
-/* C statement to store the difference between the frame pointer
- and the stack pointer values immediately after the function prologue.
+/* Don't allow hard registers to be renamed into r2 unless r2
+ is already live or already being saved (due to eh). */
- Note, we always pretend that this is a leaf function because if
- it's not, there's no point in trying to eliminate the
- frame pointer. If it is a leaf function, we guessed right! */
-#define INITIAL_FRAME_POINTER_OFFSET(VAR) \
- do {(VAR) = - compute_frame_size (get_frame_size (), 0);} while (0)
+#define HARD_REGNO_RENAME_OK(OLD_REG, NEW_REG) \
+ ((NEW_REG) != 2 || df_regs_ever_live_p (2) || crtl->calls_eh_return)
/* Base register for access to arguments of the function. */
-#define ARG_POINTER_REGNUM 3
+#define ARG_POINTER_REGNUM (TARGET_64BIT ? 29 : 3)
/* Register in which static-chain is passed to a function. */
-#define STATIC_CHAIN_REGNUM 29
+#define STATIC_CHAIN_REGNUM (TARGET_64BIT ? 31 : 29)
/* Register used to address the offset table for position-independent
data references. */
/* Function to return the rtx used to save the pic offset table register
across function calls. */
-extern struct rtx_def *hppa_pic_save_rtx (void);
+extern rtx hppa_pic_save_rtx (void);
#define DEFAULT_PCC_STRUCT_RETURN 0
is passed to a function. */
#define PA_STRUCT_VALUE_REGNUM 28
+/* Definitions for register eliminations.
+
+ We have two registers that can be eliminated. First, the frame pointer
+ register can often be eliminated in favor of the stack pointer register.
+ Secondly, the argument pointer register can always be eliminated in the
+ 32-bit runtimes. */
+
+/* This is an array of structures. Each structure initializes one pair
+ of eliminable registers. The "from" register number is given first,
+ followed by "to". Eliminations of the same "from" register are listed
+ in order of preference.
+
+ The argument pointer cannot be eliminated in the 64-bit runtime. It
+ is the same register as the hard frame pointer in the 32-bit runtime.
+ So, it does not need to be listed. */
+#define ELIMINABLE_REGS \
+{{ HARD_FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
+ { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
+ { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM} }
+
+/* Define the offset between two registers, one to be eliminated,
+ and the other its replacement, at the start of a routine. */
+#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
+ ((OFFSET) = pa_initial_elimination_offset(FROM, TO))
+
/* Describe how we implement __builtin_eh_return. */
#define EH_RETURN_DATA_REGNO(N) \
((N) < 3 ? (N) + 20 : (N) == 3 ? 31 : INVALID_REGNUM)
#define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, 29)
-#define EH_RETURN_HANDLER_RTX \
- gen_rtx_MEM (word_mode, \
- gen_rtx_PLUS (word_mode, frame_pointer_rtx, \
- TARGET_64BIT ? GEN_INT (-16) : GEN_INT (-20)))
-
-
-/* Offset from the argument pointer register value to the top of
- stack. This is different from FIRST_PARM_OFFSET because of the
- frame marker. */
-#define ARG_POINTER_CFA_OFFSET(FNDECL) 0
+#define EH_RETURN_HANDLER_RTX pa_eh_return_handler_rtx ()
+
+/* Offset from the frame pointer register value to the top of stack. */
+#define FRAME_POINTER_CFA_OFFSET(FNDECL) 0
+
+/* The maximum number of hard registers that can be saved in the call
+ frame. The soft frame pointer is not included. */
+#define DWARF_FRAME_REGISTERS (FIRST_PSEUDO_REGISTER - 1)
+
+/* A C expression whose value is RTL representing the location of the
+ incoming return address at the beginning of any function, before the
+ prologue. You only need to define this macro if you want to support
+ call frame debugging information like that provided by DWARF 2. */
+#define INCOMING_RETURN_ADDR_RTX (gen_rtx_REG (word_mode, 2))
+#define DWARF_FRAME_RETURN_COLUMN (DWARF_FRAME_REGNUM (2))
+
+/* A C expression whose value is an integer giving a DWARF 2 column
+ number that may be used as an alternate return column. This should
+ be defined only if DWARF_FRAME_RETURN_COLUMN is set to a general
+ register, but an alternate column needs to be used for signal frames.
+
+ Column 0 is not used but unfortunately its register size is set to
+ 4 bytes (sizeof CCmode) so it can't be used on 64-bit targets. */
+#define DWARF_ALT_FRAME_RETURN_COLUMN (FIRST_PSEUDO_REGISTER - 1)
+
+/* This macro chooses the encoding of pointers embedded in the exception
+ handling sections. If at all possible, this should be defined such
+ that the exception handling section will not require dynamic relocations,
+ and so may be read-only.
+
+ Because the HP assembler auto aligns, it is necessary to use
+ DW_EH_PE_aligned. It's not possible to make the data read-only
+ on the HP-UX SOM port since the linker requires fixups for label
+ differences in different sections to be word aligned. However,
+ the SOM linker can do unaligned fixups for absolute pointers.
+ We also need aligned pointers for global and function pointers.
+
+ Although the HP-UX 64-bit ELF linker can handle unaligned pc-relative
+ fixups, the runtime doesn't have a consistent relationship between
+ text and data for dynamically loaded objects. Thus, it's not possible
+ to use pc-relative encoding for pointers on this target. It may be
+ possible to use segment relative encodings but GAS doesn't currently
+ have a mechanism to generate these encodings. For other targets, we
+ use pc-relative encoding for pointers. If the pointer might require
+ dynamic relocation, we make it indirect. */
+#define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) \
+ (TARGET_GAS && !TARGET_HPUX \
+ ? (DW_EH_PE_pcrel \
+ | ((GLOBAL) || (CODE) == 2 ? DW_EH_PE_indirect : 0) \
+ | (TARGET_64BIT ? DW_EH_PE_sdata8 : DW_EH_PE_sdata4)) \
+ : (!TARGET_GAS || (GLOBAL) || (CODE) == 2 \
+ ? DW_EH_PE_aligned : DW_EH_PE_absptr))
+
+/* Handle special EH pointer encodings. Absolute, pc-relative, and
+ indirect are handled automatically. We output pc-relative, and
+ indirect pc-relative ourself since we need some special magic to
+ generate pc-relative relocations, and to handle indirect function
+ pointers. */
+#define ASM_MAYBE_OUTPUT_ENCODED_ADDR_RTX(FILE, ENCODING, SIZE, ADDR, DONE) \
+ do { \
+ if (((ENCODING) & 0x70) == DW_EH_PE_pcrel) \
+ { \
+ fputs (integer_asm_op (SIZE, FALSE), FILE); \
+ if ((ENCODING) & DW_EH_PE_indirect) \
+ output_addr_const (FILE, pa_get_deferred_plabel (ADDR)); \
+ else \
+ assemble_name (FILE, XSTR ((ADDR), 0)); \
+ fputs ("+8-$PIC_pcrel$0", FILE); \
+ goto DONE; \
+ } \
+ } while (0)
\f
-/* The letters I, J, K, L and M in a register constraint string
- can be used to stand for particular ranges of immediate operands.
- This macro defines what the ranges are.
- C is the letter, and VALUE is a constant value.
- Return 1 if VALUE is in the range specified by C.
-
- `I' is used for the 11 bit constants.
- `J' is used for the 14 bit constants.
- `K' is used for values that can be moved with a zdepi insn.
- `L' is used for the 5 bit constants.
- `M' is used for 0.
- `N' is used for values with the least significant 11 bits equal to zero
- and when sign extended from 32 to 64 bits the
- value does not change.
- `O' is used for numbers n such that n+1 is a power of 2.
- */
-
-#define CONST_OK_FOR_LETTER_P(VALUE, C) \
- ((C) == 'I' ? VAL_11_BITS_P (VALUE) \
- : (C) == 'J' ? VAL_14_BITS_P (VALUE) \
- : (C) == 'K' ? zdepi_cint_p (VALUE) \
- : (C) == 'L' ? VAL_5_BITS_P (VALUE) \
- : (C) == 'M' ? (VALUE) == 0 \
- : (C) == 'N' ? (((VALUE) & (((HOST_WIDE_INT) -1 << 31) | 0x7ff)) == 0 \
- || (((VALUE) & (((HOST_WIDE_INT) -1 << 31) | 0x7ff)) \
- == (HOST_WIDE_INT) -1 << 31)) \
- : (C) == 'O' ? (((VALUE) & ((VALUE) + 1)) == 0) \
- : (C) == 'P' ? and_mask_p (VALUE) \
- : 0)
-
-/* Similar, but for floating or large integer constants, and defining letters
- G and H. Here VALUE is the CONST_DOUBLE rtx itself.
-
- For PA, `G' is the floating-point constant zero. `H' is undefined. */
-
-#define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
- ((C) == 'G' ? (GET_MODE_CLASS (GET_MODE (VALUE)) == MODE_FLOAT \
- && (VALUE) == CONST0_RTX (GET_MODE (VALUE))) \
- : 0)
/* The class value for index registers, and the one for base regs. */
#define INDEX_REG_CLASS GENERAL_REGS
/* True if register is floating-point. */
#define FP_REGNO_P(N) ((N) >= FP_REG_FIRST && (N) <= FP_REG_LAST)
-/* Given an rtx X being reloaded into a reg required to be
- in class CLASS, return the class of reg to actually use.
- In general this is just CLASS; but on some machines
- in some cases it is preferable to use a more restrictive class. */
-#define PREFERRED_RELOAD_CLASS(X,CLASS) (CLASS)
-
-/* Return the register class of a scratch register needed to copy
- IN into a register in CLASS in MODE, or a register in CLASS in MODE
- to IN. If it can be done directly NO_REGS is returned.
-
- Avoid doing any work for the common case calls. */
-#define SECONDARY_RELOAD_CLASS(CLASS,MODE,IN) \
- ((CLASS == BASE_REG_CLASS && GET_CODE (IN) == REG \
- && REGNO (IN) < FIRST_PSEUDO_REGISTER) \
- ? NO_REGS : secondary_reload_class (CLASS, MODE, IN))
-
#define MAYBE_FP_REG_CLASS_P(CLASS) \
reg_classes_intersect_p ((CLASS), FP_REGS)
-/* On the PA it is not possible to directly move data between
- GENERAL_REGS and FP_REGS. */
-#define SECONDARY_MEMORY_NEEDED(CLASS1, CLASS2, MODE) \
- (MAYBE_FP_REG_CLASS_P (CLASS1) != FP_REG_CLASS_P (CLASS2) \
- || MAYBE_FP_REG_CLASS_P (CLASS2) != FP_REG_CLASS_P (CLASS1))
-
-/* Return the stack location to use for secondary memory needed reloads. */
-#define SECONDARY_MEMORY_NEEDED_RTX(MODE) \
- gen_rtx_MEM (MODE, gen_rtx_PLUS (Pmode, stack_pointer_rtx, GEN_INT (-16)))
-
\f
/* Stack layout; function entry, exit and calling. */
/* Believe it or not. */
#define ARGS_GROW_DOWNWARD
-/* Define this if the nominal address of the stack frame
+/* Define this to nonzero if the nominal address of the stack frame
is at the high-address end of the local variables;
that is, each additional local variable allocated
goes at a more negative offset in the frame. */
-/* #define FRAME_GROWS_DOWNWARD */
+#define FRAME_GROWS_DOWNWARD 0
/* Offset within stack frame to start allocating local variables at.
If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
/* Define this if the above stack space is to be considered part of the
space allocated by the caller. */
-#define OUTGOING_REG_PARM_STACK_SPACE
+#define OUTGOING_REG_PARM_STACK_SPACE(FNTYPE) 1
/* Keep the stack pointer constant throughout the function.
This is both an optimization and a necessity: longjmp
marker, although the runtime documentation only describes a 16
byte marker. For compatibility, we allocate 48 bytes. */
#define STACK_POINTER_OFFSET \
- (TARGET_64BIT ? -(current_function_outgoing_args_size + 48): -32)
+ (TARGET_64BIT ? -(crtl->outgoing_args_size + 48): -32)
#define STACK_DYNAMIC_OFFSET(FNDECL) \
(TARGET_64BIT \
? (STACK_POINTER_OFFSET) \
- : ((STACK_POINTER_OFFSET) - current_function_outgoing_args_size))
-
-/* Value is 1 if returning from a function call automatically
- pops the arguments described by the number-of-args field in the call.
- FUNDECL is the declaration node of the function (as a tree),
- FUNTYPE is the data type of the function (as a tree),
- or for a library call it is an identifier node for the subroutine name. */
-
-#define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0
-
-/* Define how to find the value returned by a function.
- VALTYPE is the data type of the value (as a tree).
- If the precise function being called is known, FUNC is its FUNCTION_DECL;
- otherwise, FUNC is 0. */
-
-#define FUNCTION_VALUE(VALTYPE, FUNC) function_value (VALTYPE, FUNC)
-
-/* Define how to find the value returned by a library function
- assuming the value has mode MODE. */
-
-#define LIBCALL_VALUE(MODE) \
- gen_rtx_REG (MODE, \
- (! TARGET_SOFT_FLOAT \
- && ((MODE) == SFmode || (MODE) == DFmode) ? 32 : 28))
-
-/* 1 if N is a possible register number for a function value
- as seen by the caller. */
-
-#define FUNCTION_VALUE_REGNO_P(N) \
- ((N) == 28 || (! TARGET_SOFT_FLOAT && (N) == 32))
+ : ((STACK_POINTER_OFFSET) - crtl->outgoing_args_size))
\f
/* Define a data type for recording info about an argument list
(CUM).words = 0, \
(CUM).incoming = 0, \
(CUM).indirect = (FNTYPE) && !(FNDECL), \
- (CUM).nargs_prototype = (FNTYPE && TYPE_ARG_TYPES (FNTYPE) \
+ (CUM).nargs_prototype = (FNTYPE && prototype_p (FNTYPE) \
? (list_length (TYPE_ARG_TYPES (FNTYPE)) - 1 \
+ (TYPE_MODE (TREE_TYPE (FNTYPE)) == BLKmode \
|| pa_return_in_memory (TREE_TYPE (FNTYPE), 0))) \
? (HOST_WIDE_INT) GET_MODE_SIZE (MODE) \
: int_size_in_bytes (TYPE)) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
-/* Update the data in CUM to advance over an argument
- of mode MODE and data type TYPE.
- (TYPE is null for libcalls where that information may not be available.) */
-
-#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
-{ (CUM).nargs_prototype--; \
- (CUM).words += FUNCTION_ARG_SIZE(MODE, TYPE) \
- + (((CUM).words & 01) && (TYPE) != 0 \
- && FUNCTION_ARG_SIZE(MODE, TYPE) > 1); \
-}
-
/* Determine where to put an argument to a function.
Value is zero to push the argument on the stack,
or a hard register in which to store the argument.
the standard parameter passing conventions on the RS6000. That's why
you'll see lots of similar code in rs6000.h. */
-#define FUNCTION_ARG_PADDING(MODE, TYPE) function_arg_padding ((MODE), (TYPE))
-
-/* Do not expect to understand this without reading it several times. I'm
- tempted to try and simply it, but I worry about breaking something. */
-
-#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
- function_arg (&CUM, MODE, TYPE, NAMED)
-
-/* Nonzero if we do not know how to pass TYPE solely in registers. */
-#define MUST_PASS_IN_STACK(MODE,TYPE) \
- ((TYPE) != 0 \
- && (TREE_CODE (TYPE_SIZE (TYPE)) != INTEGER_CST \
- || TREE_ADDRESSABLE (TYPE)))
-
-/* For an arg passed partly in registers and partly in memory,
- this is the number of registers used.
- For args passed entirely in registers or entirely in memory, zero. */
-
-/* For PA32 there are never split arguments. PA64, on the other hand, can
- pass arguments partially in registers and partially in memory. */
-#define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \
- (TARGET_64BIT ? function_arg_partial_nregs (&CUM, MODE, TYPE, NAMED) : 0)
-
-/* If defined, a C expression that gives the alignment boundary, in
- bits, of an argument with the specified mode and type. If it is
- not defined, `PARM_BOUNDARY' is used for all arguments. */
-
-/* Arguments larger than one word are double word aligned. */
-
-#define FUNCTION_ARG_BOUNDARY(MODE, TYPE) \
- (((TYPE) \
- ? (integer_zerop (TYPE_SIZE (TYPE)) \
- || !TREE_CONSTANT (TYPE_SIZE (TYPE)) \
- || int_size_in_bytes (TYPE) <= UNITS_PER_WORD) \
- : GET_MODE_SIZE(MODE) <= UNITS_PER_WORD) \
- ? PARM_BOUNDARY : MAX_PARM_BOUNDARY)
-
-/* In the 32-bit runtime, arguments larger than eight bytes are passed
- by invisible reference. As a GCC extension, we also pass anything
- with a zero or variable size by reference.
-
- The 64-bit runtime does not describe passing any types by invisible
- reference. The internals of GCC can't currently handle passing
- empty structures, and zero or variable length arrays when they are
- not passed entirely on the stack or by reference. Thus, as a GCC
- extension, we pass these types by reference. The HP compiler doesn't
- support these types, so hopefully there shouldn't be any compatibility
- issues. This may have to be revisited when HP releases a C99 compiler
- or updates the ABI. */
-#define FUNCTION_ARG_PASS_BY_REFERENCE(CUM, MODE, TYPE, NAMED) \
- (TARGET_64BIT \
- ? ((TYPE) && int_size_in_bytes (TYPE) <= 0) \
- : (((TYPE) && (int_size_in_bytes (TYPE) > 8 \
- || int_size_in_bytes (TYPE) <= 0)) \
- || ((MODE) && GET_MODE_SIZE (MODE) > 8)))
-
-#define FUNCTION_ARG_CALLEE_COPIES(CUM, MODE, TYPE, NAMED) \
- FUNCTION_ARG_PASS_BY_REFERENCE (CUM, MODE, TYPE, NAMED)
+/* If defined, a C expression which determines whether, and in which
+ direction, to pad out an argument with extra space. */
+#define FUNCTION_ARG_PADDING(MODE, TYPE) \
+ pa_function_arg_padding ((MODE), (TYPE))
-\f
-extern GTY(()) rtx hppa_compare_op0;
-extern GTY(()) rtx hppa_compare_op1;
-extern enum cmp_type hppa_branch_type;
+/* Specify padding for the last element of a block move between registers
+ and memory.
+ The 64-bit runtime specifies that objects need to be left justified
+ (i.e., the normal justification for a big endian target). The 32-bit
+ runtime specifies right justification for objects smaller than 64 bits.
+ We use a DImode register in the parallel for 5 to 7 byte structures
+ so that there is only one element. This allows the object to be
+ correctly padded. */
+#define BLOCK_REG_PADDING(MODE, TYPE, FIRST) \
+ pa_function_arg_padding ((MODE), (TYPE))
+
+\f
/* On HPPA, we emit profiling code as rtl via PROFILE_HOOK rather than
as assembly via FUNCTION_PROFILER. Just output a local label.
We can't use the function label because the GAS SOM target can't
/* The profile counter if emitted must come before the prologue. */
#define PROFILE_BEFORE_PROLOGUE 1
+/* We never want final.c to emit profile counters. When profile
+ counters are required, we have to defer emitting them to the end
+ of the current file. */
+#define NO_PROFILE_COUNTERS 1
+
/* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
the stack pointer does not matter. The value is tested only in
functions that have frame pointers.
#define EXIT_IGNORE_STACK \
(get_frame_size () != 0 \
- || current_function_calls_alloca || current_function_outgoing_args_size)
-
-/* Output assembler code for a block containing the constant parts
- of a trampoline, leaving space for the variable parts.\
-
- The trampoline sets the static chain pointer to STATIC_CHAIN_REGNUM
- and then branches to the specified routine.
-
- This code template is copied from text segment to stack location
- and then patched with INITIALIZE_TRAMPOLINE to contain
- valid values, and then entered as a subroutine.
-
- It is best to keep this as small as possible to avoid having to
- flush multiple lines in the cache. */
-
-#define TRAMPOLINE_TEMPLATE(FILE) \
- { \
- if (!TARGET_64BIT) \
- { \
- fputs ("\tldw 36(%r22),%r21\n", FILE); \
- fputs ("\tbb,>=,n %r21,30,.+16\n", FILE); \
- if (ASSEMBLER_DIALECT == 0) \
- fputs ("\tdepi 0,31,2,%r21\n", FILE); \
- else \
- fputs ("\tdepwi 0,31,2,%r21\n", FILE); \
- fputs ("\tldw 4(%r21),%r19\n", FILE); \
- fputs ("\tldw 0(%r21),%r21\n", FILE); \
- if (TARGET_PA_20) \
- { \
- fputs ("\tbve (%r21)\n", FILE); \
- fputs ("\tldw 40(%r22),%r29\n", FILE); \
- fputs ("\t.word 0\n", FILE); \
- fputs ("\t.word 0\n", FILE); \
- } \
- else \
- { \
- fputs ("\tldsid (%r21),%r1\n", FILE); \
- fputs ("\tmtsp %r1,%sr0\n", FILE); \
- fputs ("\tbe 0(%sr0,%r21)\n", FILE); \
- fputs ("\tldw 40(%r22),%r29\n", FILE); \
- } \
- fputs ("\t.word 0\n", FILE); \
- fputs ("\t.word 0\n", FILE); \
- fputs ("\t.word 0\n", FILE); \
- fputs ("\t.word 0\n", FILE); \
- } \
- else \
- { \
- fputs ("\t.dword 0\n", FILE); \
- fputs ("\t.dword 0\n", FILE); \
- fputs ("\t.dword 0\n", FILE); \
- fputs ("\t.dword 0\n", FILE); \
- fputs ("\tmfia %r31\n", FILE); \
- fputs ("\tldd 24(%r31),%r1\n", FILE); \
- fputs ("\tldd 24(%r1),%r27\n", FILE); \
- fputs ("\tldd 16(%r1),%r1\n", FILE); \
- fputs ("\tbve (%r1)\n", FILE); \
- fputs ("\tldd 32(%r31),%r31\n", FILE); \
- fputs ("\t.dword 0 ; fptr\n", FILE); \
- fputs ("\t.dword 0 ; static link\n", FILE); \
- } \
- }
+ || cfun->calls_alloca || crtl->outgoing_args_size)
/* Length in units of the trampoline for entering a nested function. */
#define TRAMPOLINE_SIZE (TARGET_64BIT ? 72 : 52)
-/* Length in units of the trampoline instruction code. */
+/* Alignment required by the trampoline. */
-#define TRAMPOLINE_CODE_SIZE (TARGET_64BIT ? 24 : (TARGET_PA_20 ? 32 : 40))
+#define TRAMPOLINE_ALIGNMENT BITS_PER_WORD
/* Minimum length of a cache line. A length of 16 will work on all
PA-RISC processors. All PA 1.1 processors have a cache line of
#define MIN_CACHELINE_SIZE 32
-/* Emit RTL insns to initialize the variable parts of a trampoline.
- FNADDR is an RTX for the address of the function's pure code.
- CXT is an RTX for the static chain value for the function.
-
- Move the function address to the trampoline template at offset 36.
- Move the static chain value to trampoline template at offset 40.
- Move the trampoline address to trampoline template at offset 44.
- Move r19 to trampoline template at offset 48. The latter two
- words create a plabel for the indirect call to the trampoline.
-
- A similar sequence is used for the 64-bit port but the plabel is
- at the beginning of the trampoline.
-
- Finally, the cache entries for the trampoline code are flushed.
- This is necessary to ensure that the trampoline instruction sequence
- is written to memory prior to any attempts at prefetching the code
- sequence. */
-
-#define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) \
-{ \
- rtx start_addr = gen_reg_rtx (Pmode); \
- rtx end_addr = gen_reg_rtx (Pmode); \
- rtx line_length = gen_reg_rtx (Pmode); \
- rtx tmp; \
- \
- if (!TARGET_64BIT) \
- { \
- tmp = memory_address (Pmode, plus_constant ((TRAMP), 36)); \
- emit_move_insn (gen_rtx_MEM (Pmode, tmp), (FNADDR)); \
- tmp = memory_address (Pmode, plus_constant ((TRAMP), 40)); \
- emit_move_insn (gen_rtx_MEM (Pmode, tmp), (CXT)); \
- \
- /* Create a fat pointer for the trampoline. */ \
- tmp = memory_address (Pmode, plus_constant ((TRAMP), 44)); \
- emit_move_insn (gen_rtx_MEM (Pmode, tmp), (TRAMP)); \
- tmp = memory_address (Pmode, plus_constant ((TRAMP), 48)); \
- emit_move_insn (gen_rtx_MEM (Pmode, tmp), \
- gen_rtx_REG (Pmode, 19)); \
- \
- /* fdc and fic only use registers for the address to flush, \
- they do not accept integer displacements. We align the \
- start and end addresses to the beginning of their respective \
- cache lines to minimize the number of lines flushed. */ \
- tmp = force_reg (Pmode, (TRAMP)); \
- emit_insn (gen_andsi3 (start_addr, tmp, \
- GEN_INT (-MIN_CACHELINE_SIZE))); \
- tmp = force_reg (Pmode, \
- plus_constant (tmp, TRAMPOLINE_CODE_SIZE - 1)); \
- emit_insn (gen_andsi3 (end_addr, tmp, \
- GEN_INT (-MIN_CACHELINE_SIZE))); \
- emit_move_insn (line_length, GEN_INT (MIN_CACHELINE_SIZE)); \
- emit_insn (gen_dcacheflush (start_addr, end_addr, line_length)); \
- emit_insn (gen_icacheflush (start_addr, end_addr, line_length, \
- gen_reg_rtx (Pmode), \
- gen_reg_rtx (Pmode), \
- gen_reg_rtx (Pmode))); \
- } \
- else \
- { \
- tmp = memory_address (Pmode, plus_constant ((TRAMP), 56)); \
- emit_move_insn (gen_rtx_MEM (Pmode, tmp), (FNADDR)); \
- tmp = memory_address (Pmode, plus_constant ((TRAMP), 64)); \
- emit_move_insn (gen_rtx_MEM (Pmode, tmp), (CXT)); \
- \
- /* Create a fat pointer for the trampoline. */ \
- tmp = memory_address (Pmode, plus_constant ((TRAMP), 16)); \
- emit_move_insn (gen_rtx_MEM (Pmode, tmp), \
- force_reg (Pmode, plus_constant ((TRAMP), 32))); \
- tmp = memory_address (Pmode, plus_constant ((TRAMP), 24)); \
- emit_move_insn (gen_rtx_MEM (Pmode, tmp), \
- gen_rtx_REG (Pmode, 27)); \
- \
- /* fdc and fic only use registers for the address to flush, \
- they do not accept integer displacements. We align the \
- start and end addresses to the beginning of their respective \
- cache lines to minimize the number of lines flushed. */ \
- tmp = force_reg (Pmode, plus_constant ((TRAMP), 32)); \
- emit_insn (gen_anddi3 (start_addr, tmp, \
- GEN_INT (-MIN_CACHELINE_SIZE))); \
- tmp = force_reg (Pmode, \
- plus_constant (tmp, TRAMPOLINE_CODE_SIZE - 1)); \
- emit_insn (gen_anddi3 (end_addr, tmp, \
- GEN_INT (-MIN_CACHELINE_SIZE))); \
- emit_move_insn (line_length, GEN_INT (MIN_CACHELINE_SIZE)); \
- emit_insn (gen_dcacheflush (start_addr, end_addr, line_length)); \
- emit_insn (gen_icacheflush (start_addr, end_addr, line_length, \
- gen_reg_rtx (Pmode), \
- gen_reg_rtx (Pmode), \
- gen_reg_rtx (Pmode))); \
- } \
-}
-
-/* Perform any machine-specific adjustment in the address of the trampoline.
- ADDR contains the address that was passed to INITIALIZE_TRAMPOLINE.
- Adjust the trampoline address to point to the plabel at offset 44. */
-
-#define TRAMPOLINE_ADJUST_ADDRESS(ADDR) \
- if (!TARGET_64BIT) (ADDR) = memory_address (Pmode, plus_constant ((ADDR), 46))
-
-/* Implement `va_start' for varargs and stdarg. */
-
-#define EXPAND_BUILTIN_VA_START(valist, nextarg) \
- hppa_va_start (valist, nextarg)
-
-/* Implement `va_arg'. */
-
-#define EXPAND_BUILTIN_VA_ARG(valist, type) \
- hppa_va_arg (valist, type)
\f
/* Addressing modes, and classification of registers for them.
/* Macros to check register numbers against specific register classes. */
-/* These assume that REGNO is a hard or pseudo reg number.
- They give nonzero only if REGNO is a hard reg of the suitable class
+/* The following macros assume that X is a hard or pseudo reg number.
+ They give nonzero only if X is a hard reg of the suitable class
or a pseudo reg currently allocated to a suitable hard reg.
Since they use reg_renumber, they are safe only once reg_renumber
has been allocated, which happens in local-alloc.c. */
-#define REGNO_OK_FOR_INDEX_P(REGNO) \
- ((REGNO) && ((REGNO) < 32 || (unsigned) reg_renumber[REGNO] < 32))
-#define REGNO_OK_FOR_BASE_P(REGNO) \
- ((REGNO) && ((REGNO) < 32 || (unsigned) reg_renumber[REGNO] < 32))
-#define REGNO_OK_FOR_FP_P(REGNO) \
- (FP_REGNO_P (REGNO) || FP_REGNO_P (reg_renumber[REGNO]))
+#define REGNO_OK_FOR_INDEX_P(X) \
+ ((X) && ((X) < 32 \
+ || ((X) == FRAME_POINTER_REGNUM) \
+ || ((X) >= FIRST_PSEUDO_REGISTER \
+ && reg_renumber \
+ && (unsigned) reg_renumber[X] < 32)))
+#define REGNO_OK_FOR_BASE_P(X) \
+ ((X) && ((X) < 32 \
+ || ((X) == FRAME_POINTER_REGNUM) \
+ || ((X) >= FIRST_PSEUDO_REGISTER \
+ && reg_renumber \
+ && (unsigned) reg_renumber[X] < 32)))
+#define REGNO_OK_FOR_FP_P(X) \
+ (FP_REGNO_P (X) \
+ || (X >= FIRST_PSEUDO_REGISTER \
+ && reg_renumber \
+ && FP_REGNO_P (reg_renumber[X])))
/* Now macros that check whether X is a register and also,
strictly, whether it is in a specified class.
#define MAX_REGS_PER_ADDRESS 2
+/* Non-TLS symbolic references. */
+#define PA_SYMBOL_REF_TLS_P(RTX) \
+ (GET_CODE (RTX) == SYMBOL_REF && SYMBOL_REF_TLS_MODEL (RTX) != 0)
+
/* Recognize any constant value that is a valid address except
for symbolic addresses. We get better CSE by rejecting them
here and allowing hppa_legitimize_address to break them up. We
use most of the constants accepted by CONSTANT_P, except CONST_DOUBLE. */
#define CONSTANT_ADDRESS_P(X) \
- ((GET_CODE (X) == LABEL_REF || GET_CODE (X) == SYMBOL_REF \
+ ((GET_CODE (X) == LABEL_REF \
+ || (GET_CODE (X) == SYMBOL_REF && !SYMBOL_REF_TLS_MODEL (X)) \
|| GET_CODE (X) == CONST_INT || GET_CODE (X) == CONST \
|| GET_CODE (X) == HIGH) \
- && (reload_in_progress || reload_completed || ! symbolic_expression_p (X)))
+ && (reload_in_progress || reload_completed \
+ || ! pa_symbolic_expression_p (X)))
/* A C expression that is nonzero if we are using the new HP assembler. */
#define LEGITIMATE_64BIT_CONST_INT_P(X) \
((X) >= MIN_LEGIT_64BIT_CONST_INT && (X) < MAX_LEGIT_64BIT_CONST_INT)
-/* A C expression that is nonzero if X is a legitimate constant for an
- immediate operand.
-
- We include all constant integers and constant doubles, but not
- floating-point, except for floating-point zero. We reject LABEL_REFs
- if we're not using gas or the new HP assembler.
-
- In 64-bit mode, we reject CONST_DOUBLES. We also reject CONST_INTS
- that need more than three instructions to load prior to reload. This
- limit is somewhat arbitrary. It takes three instructions to load a
- CONST_INT from memory but two are memory accesses. It may be better
- to increase the allowed range for CONST_INTS. We may also be able
- to handle CONST_DOUBLES. */
-
-#define LEGITIMATE_CONSTANT_P(X) \
- ((GET_MODE_CLASS (GET_MODE (X)) != MODE_FLOAT \
- || (X) == CONST0_RTX (GET_MODE (X))) \
- && (NEW_HP_ASSEMBLER || TARGET_GAS || GET_CODE (X) != LABEL_REF) \
- && !(TARGET_64BIT && GET_CODE (X) == CONST_DOUBLE) \
- && !(TARGET_64BIT && GET_CODE (X) == CONST_INT \
- && !(HOST_BITS_PER_WIDE_INT <= 32 \
- || (reload_in_progress || reload_completed) \
- || LEGITIMATE_64BIT_CONST_INT_P (INTVAL (X)) \
- || cint_ok_for_move (INTVAL (X)))) \
- && !function_label_operand (X, VOIDmode))
-
-/* Subroutines for EXTRA_CONSTRAINT.
-
- Return 1 iff OP is a pseudo which did not get a hard register and
- we are running the reload pass. */
-#define IS_RELOADING_PSEUDO_P(OP) \
- ((reload_in_progress \
- && GET_CODE (OP) == REG \
- && REGNO (OP) >= FIRST_PSEUDO_REGISTER \
- && reg_renumber [REGNO (OP)] < 0))
+/* Target flags set on a symbol_ref. */
+
+/* Set by ASM_OUTPUT_SYMBOL_REF when a symbol_ref is output. */
+#define SYMBOL_FLAG_REFERENCED (1 << SYMBOL_FLAG_MACH_DEP_SHIFT)
+#define SYMBOL_REF_REFERENCED_P(RTX) \
+ ((SYMBOL_REF_FLAGS (RTX) & SYMBOL_FLAG_REFERENCED) != 0)
+
+/* Defines for constraints.md. */
/* Return 1 iff OP is a scaled or unscaled index address. */
#define IS_INDEX_ADDR_P(OP) \
&& REG_OK_FOR_BASE_P (XEXP (OP, 0)) \
&& GET_CODE (XEXP (OP, 1)) == UNSPEC)
-/* Optional extra constraints for this machine. Borrowed from sparc.h.
-
- `A' is a LO_SUM DLT memory operand.
-
- `Q' is any memory operand that isn't a symbolic, indexed or lo_sum
- memory operand. Note that an unassigned pseudo register is such a
- memory operand. Needed because reload will generate these things
- and then not re-recognize the insn, causing constrain_operands to
- fail.
-
- `R' is a scaled/unscaled indexed memory operand.
-
- `S' is the constant 31.
-
- `T' is for fp loads and stores.
-
- `U' is the constant 63. */
-
-#define EXTRA_CONSTRAINT(OP, C) \
- ((C) == 'Q' ? \
- (IS_RELOADING_PSEUDO_P (OP) \
- || (GET_CODE (OP) == MEM \
- && (reload_in_progress \
- || memory_address_p (GET_MODE (OP), XEXP (OP, 0))) \
- && !symbolic_memory_operand (OP, VOIDmode) \
- && !IS_LO_SUM_DLT_ADDR_P (XEXP (OP, 0)) \
- && !IS_INDEX_ADDR_P (XEXP (OP, 0)))) \
- : ((C) == 'A' ? \
- (GET_CODE (OP) == MEM \
- && IS_LO_SUM_DLT_ADDR_P (XEXP (OP, 0))) \
- : ((C) == 'R' ? \
- (GET_CODE (OP) == MEM \
- && IS_INDEX_ADDR_P (XEXP (OP, 0))) \
- : ((C) == 'T' ? \
- (GET_CODE (OP) == MEM \
- && !IS_LO_SUM_DLT_ADDR_P (XEXP (OP, 0)) \
- && !IS_INDEX_ADDR_P (XEXP (OP, 0)) \
- /* Using DFmode forces only short displacements \
- to be recognized as valid in reg+d addresses. \
- However, this is not necessary for PA2.0 since \
- it has long FP loads/stores. \
- \
- FIXME: the ELF32 linker clobbers the LSB of \
- the FP register number in {fldw,fstw} insns. \
- Thus, we only allow long FP loads/stores on \
- TARGET_64BIT. */ \
- && memory_address_p ((TARGET_PA_20 && !TARGET_ELF32 \
- ? GET_MODE (OP) \
- : DFmode), \
- XEXP (OP, 0))) \
- : ((C) == 'S' ? \
- (GET_CODE (OP) == CONST_INT && INTVAL (OP) == 31) \
- : ((C) == 'U' ? \
- (GET_CODE (OP) == CONST_INT && INTVAL (OP) == 63) : 0))))))
-
+/* Nonzero if 14-bit offsets can be used for all loads and stores.
+ This is not possible when generating PA 1.x code as floating point
+ loads and stores only support 5-bit offsets. Note that we do not
+ forbid the use of 14-bit offsets in GO_IF_LEGITIMATE_ADDRESS.
+ Instead, we use pa_secondary_reload() to reload integer mode
+ REG+D memory addresses used in floating point loads and stores.
+
+ FIXME: the ELF32 linker clobbers the LSB of the FP register number
+ in PA 2.0 floating-point insns with long displacements. This is
+ because R_PARISC_DPREL14WR and other relocations like it are not
+ yet supported by GNU ld. For now, we reject long displacements
+ on this target. */
+
+#define INT14_OK_STRICT \
+ (TARGET_SOFT_FLOAT \
+ || TARGET_DISABLE_FPREGS \
+ || (TARGET_PA_20 && !TARGET_ELF32))
/* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
and check its validity for a certain class.
/* Nonzero if X is a hard reg that can be used as an index
or if it is a pseudo reg. */
#define REG_OK_FOR_INDEX_P(X) \
-(REGNO (X) && (REGNO (X) < 32 || REGNO (X) >= FIRST_PSEUDO_REGISTER))
+ (REGNO (X) && (REGNO (X) < 32 \
+ || REGNO (X) == FRAME_POINTER_REGNUM \
+ || REGNO (X) >= FIRST_PSEUDO_REGISTER))
+
/* Nonzero if X is a hard reg that can be used as a base reg
or if it is a pseudo reg. */
#define REG_OK_FOR_BASE_P(X) \
-(REGNO (X) && (REGNO (X) < 32 || REGNO (X) >= FIRST_PSEUDO_REGISTER))
+ (REGNO (X) && (REGNO (X) < 32 \
+ || REGNO (X) == FRAME_POINTER_REGNUM \
+ || REGNO (X) >= FIRST_PSEUDO_REGISTER))
#else
/* Nonzero if X is a hard reg that can be used as an index. */
#define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X))
+
/* Nonzero if X is a hard reg that can be used as a base reg. */
#define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
the REG_POINTER lossage can be fixed, it seems better canonicalize.
We initially break out scaled indexed addresses in canonical order
- in emit_move_sequence. LEGITIMIZE_ADDRESS also canonicalizes
+ in pa_emit_move_sequence. LEGITIMIZE_ADDRESS also canonicalizes
scaled indexed addresses during RTL generation. However, fold_rtx
has its own opinion on how the operands of a PLUS should be ordered.
If one of the operands is equivalent to a constant, it will make
We treat a SYMBOL_REF as legitimate if it is part of the current
function's constant-pool, because such addresses can actually be
- output as REG+SMALLINT.
-
- Note we only allow 5 bit immediates for access to a constant address;
- doing so avoids losing for loading/storing a FP register at an address
- which will not fit in 5 bits. */
+ output as REG+SMALLINT. */
#define VAL_5_BITS_P(X) ((unsigned HOST_WIDE_INT)(X) + 0x10 < 0x20)
#define INT_5_BITS(X) VAL_5_BITS_P (INTVAL (X))
((TARGET_64BIT && (MODE) == DImode) \
|| (MODE) == SImode \
|| (MODE) == HImode \
- || (!TARGET_SOFT_FLOAT && ((MODE) == DFmode || (MODE) == SFmode)))
+ || (MODE) == SFmode \
+ || (MODE) == DFmode)
/* These are the modes that we allow for unscaled indexing. */
#define MODE_OK_FOR_UNSCALED_INDEXING_P(MODE) \
|| (MODE) == SImode \
|| (MODE) == HImode \
|| (MODE) == QImode \
- || (!TARGET_SOFT_FLOAT && ((MODE) == DFmode || (MODE) == SFmode)))
+ || (MODE) == SFmode \
+ || (MODE) == DFmode)
#define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
{ \
if (base \
&& GET_CODE (index) == CONST_INT \
&& ((INT_14_BITS (index) \
- && (TARGET_SOFT_FLOAT \
- || (TARGET_PA_20 \
- && ((MODE == SFmode \
- && (INTVAL (index) % 4) == 0) \
- || (MODE == DFmode \
- && (INTVAL (index) % 8) == 0))) \
- || ((MODE) != SFmode && (MODE) != DFmode))) \
+ && (((MODE) != DImode \
+ && (MODE) != SFmode \
+ && (MODE) != DFmode) \
+ /* The base register for DImode loads and stores \
+ with long displacements must be aligned because \
+ the lower three bits in the displacement are \
+ assumed to be zero. */ \
+ || ((MODE) == DImode \
+ && (!TARGET_64BIT \
+ || (INTVAL (index) % 8) == 0)) \
+ /* Similarly, the base register for SFmode/DFmode \
+ loads and stores with long displacements must \
+ be aligned. */ \
+ || (((MODE) == SFmode || (MODE) == DFmode) \
+ && INT14_OK_STRICT \
+ && (INTVAL (index) % GET_MODE_SIZE (MODE)) == 0))) \
|| INT_5_BITS (index))) \
goto ADDR; \
if (!TARGET_DISABLE_INDEXING \
&& (TARGET_NO_SPACE_REGS \
? (base && REG_P (index)) \
: (base == XEXP (X, 1) && REG_P (index) \
- && REG_POINTER (base) && !REG_POINTER (index))) \
+ && (reload_completed \
+ || (reload_in_progress && HARD_REGISTER_P (base)) \
+ || REG_POINTER (base)) \
+ && (reload_completed \
+ || (reload_in_progress && HARD_REGISTER_P (index)) \
+ || !REG_POINTER (index)))) \
&& MODE_OK_FOR_UNSCALED_INDEXING_P (MODE) \
&& REG_OK_FOR_INDEX_P (index) \
&& borx_reg_operand (base, Pmode) \
|| ((MODE) != SFmode \
&& (MODE) != DFmode))) \
goto ADDR; \
- else if (GET_CODE (X) == LABEL_REF \
- || (GET_CODE (X) == CONST_INT \
- && INT_5_BITS (X))) \
+ else if (GET_CODE (X) == CONST_INT && INT_5_BITS (X)) \
goto ADDR; \
/* Needed for -fPIC */ \
else if (GET_CODE (X) == LO_SUM \
#define LEGITIMIZE_RELOAD_ADDRESS(AD, MODE, OPNUM, TYPE, IND, WIN) \
do { \
long offset, newoffset, mask; \
- rtx new, temp = NULL_RTX; \
+ rtx new_rtx, temp = NULL_RTX; \
\
mask = (GET_MODE_CLASS (MODE) == MODE_FLOAT \
- ? (TARGET_PA_20 && !TARGET_ELF32 ? 0x3fff : 0x1f) : 0x3fff); \
+ ? (INT14_OK_STRICT ? 0x3fff : 0x1f) : 0x3fff); \
\
if (optimize && GET_CODE (AD) == PLUS) \
temp = simplify_binary_operation (PLUS, Pmode, \
XEXP (AD, 0), XEXP (AD, 1)); \
\
- new = temp ? temp : AD; \
+ new_rtx = temp ? temp : AD; \
\
if (optimize \
- && GET_CODE (new) == PLUS \
- && GET_CODE (XEXP (new, 0)) == REG \
- && GET_CODE (XEXP (new, 1)) == CONST_INT) \
+ && GET_CODE (new_rtx) == PLUS \
+ && GET_CODE (XEXP (new_rtx, 0)) == REG \
+ && GET_CODE (XEXP (new_rtx, 1)) == CONST_INT) \
{ \
- offset = INTVAL (XEXP ((new), 1)); \
+ offset = INTVAL (XEXP ((new_rtx), 1)); \
\
/* Choose rounding direction. Round up if we are >= halfway. */ \
if ((offset & mask) >= ((mask + 1) / 2)) \
else \
newoffset = offset & ~mask; \
\
+ /* Ensure that long displacements are aligned. */ \
+ if (mask == 0x3fff \
+ && (GET_MODE_CLASS (MODE) == MODE_FLOAT \
+ || (TARGET_64BIT && (MODE) == DImode))) \
+ newoffset &= ~(GET_MODE_SIZE (MODE) - 1); \
+ \
if (newoffset != 0 && VAL_14_BITS_P (newoffset)) \
{ \
- temp = gen_rtx_PLUS (Pmode, XEXP (new, 0), \
+ temp = gen_rtx_PLUS (Pmode, XEXP (new_rtx, 0), \
GEN_INT (newoffset)); \
AD = gen_rtx_PLUS (Pmode, temp, GEN_INT (offset - newoffset));\
push_reload (XEXP (AD, 0), 0, &XEXP (AD, 0), 0, \
} while (0)
-
-\f
-/* Try machine-dependent ways of modifying an illegitimate address
- to be legitimate. If we find one, return the new, valid address.
- This macro is used in only one place: `memory_address' in explow.c.
-
- OLDX is the address as it was before break_out_memory_refs was called.
- In some cases it is useful to look at this to decide what needs to be done.
-
- MODE and WIN are passed so that this macro can use
- GO_IF_LEGITIMATE_ADDRESS.
-
- It is always safe for this macro to do nothing. It exists to recognize
- opportunities to optimize the output. */
-
-#define LEGITIMIZE_ADDRESS(X, OLDX, MODE, WIN) \
-{ rtx orig_x = (X); \
- (X) = hppa_legitimize_address (X, OLDX, MODE); \
- if ((X) != orig_x && memory_address_p (MODE, X)) \
- goto WIN; }
-
-/* Go to LABEL if ADDR (a legitimate address expression)
- has an effect that depends on the machine mode it is used for. */
-
-#define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \
- if (GET_CODE (ADDR) == PRE_DEC \
- || GET_CODE (ADDR) == POST_DEC \
- || GET_CODE (ADDR) == PRE_INC \
- || GET_CODE (ADDR) == POST_INC) \
- goto LABEL
\f
#define TARGET_ASM_SELECT_SECTION pa_select_section
-
+
/* Return a nonzero value if DECL has a section attribute. */
#define IN_NAMED_SECTION_P(DECL) \
((TREE_CODE (DECL) == FUNCTION_DECL || TREE_CODE (DECL) == VAR_DECL) \
(TREE_CODE (DECL) == FUNCTION_DECL \
|| (TREE_CODE (DECL) == VAR_DECL \
&& TREE_READONLY (DECL) && ! TREE_SIDE_EFFECTS (DECL) \
- && (! DECL_INITIAL (DECL) || ! reloc_needed (DECL_INITIAL (DECL))) \
+ && (! DECL_INITIAL (DECL) || ! pa_reloc_needed (DECL_INITIAL (DECL))) \
&& !flag_pic) \
- || (TREE_CODE_CLASS (TREE_CODE (DECL)) == 'c'))
+ || CONSTANT_CLASS_P (DECL))
#define FUNCTION_NAME_P(NAME) (*(NAME) == '@')
arguments passed in registers to avoid infinite recursion during argument
setup for a function call. Why? Consider how we copy the stack slots
reserved for parameters when they may be trashed by a call. */
-#define MOVE_RATIO (TARGET_64BIT ? 8 : 4)
+#define MOVE_RATIO(speed) (TARGET_64BIT ? 8 : 4)
/* Define if operations between registers always perform the operation
on the full register even if a narrower mode is specified. */
/* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD
will either zero-extend or sign-extend. The value of this macro should
be the code that says which one of the two operations is implicitly
- done, NIL if none. */
+ done, UNKNOWN if none. */
#define LOAD_EXTEND_OP(MODE) ZERO_EXTEND
/* Nonzero if access to memory by bytes is slow and undesirable. */
few bits. */
#define SHIFT_COUNT_TRUNCATED 1
-/* Compute extra cost of moving data between one register class
- and another.
-
- Make moves from SAR so expensive they should never happen. We used to
- have 0xffff here, but that generates overflow in rare cases.
-
- Copies involving a FP register and a non-FP register are relatively
- expensive because they must go through memory.
-
- Other copies are reasonably cheap. */
-#define REGISTER_MOVE_COST(MODE, CLASS1, CLASS2) \
- (CLASS1 == SHIFT_REGS ? 0x100 \
- : FP_REG_CLASS_P (CLASS1) && ! FP_REG_CLASS_P (CLASS2) ? 16 \
- : FP_REG_CLASS_P (CLASS2) && ! FP_REG_CLASS_P (CLASS1) ? 16 \
- : 2)
-
/* Adjust the cost of branches. */
-#define BRANCH_COST (pa_cpu == PROCESSOR_8000 ? 2 : 1)
+#define BRANCH_COST(speed_p, predictable_p) (pa_cpu == PROCESSOR_8000 ? 2 : 1)
/* Handling the special cases is going to get too complicated for a macro,
just call `pa_adjust_insn_length' to do the real work. */
delay slot of the millicode call -- thus they act more like traditional
CALL_INSNs.
- Note we can not consider side effects of the insn to be delayed because
+ Note we cannot consider side effects of the insn to be delayed because
the branch and link insn will clobber the return pointer. If we happened
to use the return pointer in the delay slot of the call, then we lose.
get_attr_type will try to recognize the given insn, so make sure to
filter out things it will not accept -- SEQUENCE, USE and CLOBBER insns
in particular. */
-#define INSN_REFERENCES_ARE_DELAYED(X) (insn_refs_are_delayed (X))
+#define INSN_REFERENCES_ARE_DELAYED(X) (pa_insn_refs_are_delayed (X))
\f
/* Control the assembler format that we output. */
/* This is how to output the definition of a user-level label named NAME,
such as the label on a static function or variable NAME. */
-#define ASM_OUTPUT_LABEL(FILE, NAME) \
- do { assemble_name (FILE, NAME); \
- fputc ('\n', FILE); } while (0)
+#define ASM_OUTPUT_LABEL(FILE,NAME) \
+ do { \
+ assemble_name ((FILE), (NAME)); \
+ if (TARGET_GAS) \
+ fputs (":\n", (FILE)); \
+ else \
+ fputc ('\n', (FILE)); \
+ } while (0)
/* This is how to output a reference to a user-level label named NAME.
`assemble_name' uses this. */
fputs (xname, FILE); \
} while (0)
+/* This how we output the symbol_ref X. */
+
+#define ASM_OUTPUT_SYMBOL_REF(FILE,X) \
+ do { \
+ SYMBOL_REF_FLAGS (X) |= SYMBOL_FLAG_REFERENCED; \
+ assemble_name (FILE, XSTR (X, 0)); \
+ } while (0)
+
/* This is how to store into the string LABEL
the symbol_ref name of an internal numbered label where
PREFIX is the class of label and NUM is the number within the class.
#define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
sprintf (LABEL, "*%c$%s%04ld", (PREFIX)[0], (PREFIX) + 1, (long)(NUM))
+/* Output the definition of a compiler-generated label named NAME. */
+
+#define ASM_OUTPUT_INTERNAL_LABEL(FILE,NAME) \
+ do { \
+ assemble_name_raw ((FILE), (NAME)); \
+ if (TARGET_GAS) \
+ fputs (":\n", (FILE)); \
+ else \
+ fputc ('\n', (FILE)); \
+ } while (0)
+
#define TARGET_ASM_GLOBALIZE_LABEL pa_globalize_label
#define ASM_OUTPUT_ASCII(FILE, P, SIZE) \
- output_ascii ((FILE), (P), (SIZE))
+ pa_output_ascii ((FILE), (P), (SIZE))
/* Jump tables are always placed in the text section. Technically, it
is possible to put them in the readonly data section when -mbig-switch
fprintf (FILE, "\t.blockz "HOST_WIDE_INT_PRINT_UNSIGNED"\n", \
(unsigned HOST_WIDE_INT)(SIZE))
+/* This says how to output an assembler line to define an uninitialized
+ global variable with size SIZE (in bytes) and alignment ALIGN (in bits).
+ This macro exists to properly support languages like C++ which do not
+ have common data. */
+
+#define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \
+ pa_asm_output_aligned_bss (FILE, NAME, SIZE, ALIGN)
+
/* This says how to output an assembler line to define a global common symbol
with size SIZE (in bytes) and alignment ALIGN (in bits). */
-#define ASM_OUTPUT_ALIGNED_COMMON(FILE, NAME, SIZE, ALIGNED) \
-{ bss_section (); \
- assemble_name ((FILE), (NAME)); \
- fprintf ((FILE), "\t.comm "HOST_WIDE_INT_PRINT_UNSIGNED"\n", \
- MAX ((unsigned HOST_WIDE_INT)(SIZE), \
- ((unsigned HOST_WIDE_INT)(ALIGNED) / BITS_PER_UNIT)));}
+#define ASM_OUTPUT_ALIGNED_COMMON(FILE, NAME, SIZE, ALIGN) \
+ pa_asm_output_aligned_common (FILE, NAME, SIZE, ALIGN)
/* This says how to output an assembler line to define a local common symbol
- with size SIZE (in bytes) and alignment ALIGN (in bits). */
+ with size SIZE (in bytes) and alignment ALIGN (in bits). This macro
+ controls how the assembler definitions of uninitialized static variables
+ are output. */
-#define ASM_OUTPUT_ALIGNED_LOCAL(FILE, NAME, SIZE, ALIGNED) \
-{ bss_section (); \
- fprintf ((FILE), "\t.align %d\n", ((ALIGNED) / BITS_PER_UNIT)); \
- assemble_name ((FILE), (NAME)); \
- fprintf ((FILE), "\n\t.block "HOST_WIDE_INT_PRINT_UNSIGNED"\n", \
- (unsigned HOST_WIDE_INT)(SIZE));}
+#define ASM_OUTPUT_ALIGNED_LOCAL(FILE, NAME, SIZE, ALIGN) \
+ pa_asm_output_aligned_local (FILE, NAME, SIZE, ALIGN)
-#define ASM_PN_FORMAT "%s___%lu"
-
/* All HP assemblers use "!" to separate logical lines. */
-#define IS_ASM_LOGICAL_LINE_SEPARATOR(C) ((C) == '!')
-
-#define PRINT_OPERAND_PUNCT_VALID_P(CHAR) \
- ((CHAR) == '@' || (CHAR) == '#' || (CHAR) == '*' || (CHAR) == '^')
+#define IS_ASM_LOGICAL_LINE_SEPARATOR(C, STR) ((C) == '!')
/* Print operand X (an rtx) in assembler syntax to file FILE.
CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
M modifier to handle preincrement addressing for memory refs.
F modifier to handle preincrement addressing for fp memory refs */
-#define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE)
+#define PRINT_OPERAND(FILE, X, CODE) pa_print_operand (FILE, X, CODE)
\f
/* Print a memory address as an operand to reference that memory location. */
#define PRINT_OPERAND_ADDRESS(FILE, ADDR) \
-{ register rtx addr = ADDR; \
- register rtx base; \
- int offset; \
+{ rtx addr = ADDR; \
switch (GET_CODE (addr)) \
{ \
case REG: \
fprintf (FILE, "0(%s)", reg_names [REGNO (addr)]); \
break; \
case PLUS: \
- if (GET_CODE (XEXP (addr, 0)) == CONST_INT) \
- offset = INTVAL (XEXP (addr, 0)), base = XEXP (addr, 1); \
- else if (GET_CODE (XEXP (addr, 1)) == CONST_INT) \
- offset = INTVAL (XEXP (addr, 1)), base = XEXP (addr, 0); \
- else \
- abort (); \
- fprintf (FILE, "%d(%s)", offset, reg_names [REGNO (base)]); \
+ gcc_assert (GET_CODE (XEXP (addr, 1)) == CONST_INT); \
+ fprintf (FILE, "%d(%s)", (int)INTVAL (XEXP (addr, 1)), \
+ reg_names [REGNO (XEXP (addr, 0))]); \
break; \
case LO_SUM: \
if (!symbolic_operand (XEXP (addr, 1), VOIDmode)) \
fputs ("RR'", FILE); \
else \
fputs ("RT'", FILE); \
- output_global_address (FILE, XEXP (addr, 1), 0); \
+ pa_output_global_address (FILE, XEXP (addr, 1), 0); \
fputs ("(", FILE); \
output_operand (XEXP (addr, 0), 0); \
fputs (")", FILE); \
/* Find the return address associated with the frame given by
FRAMEADDR. */
#define RETURN_ADDR_RTX(COUNT, FRAMEADDR) \
- (return_addr_rtx (COUNT, FRAMEADDR))
+ (pa_return_addr_rtx (COUNT, FRAMEADDR))
/* Used to mask out junk bits from the return address, such as
processor state, interrupt status, condition codes and the like. */
/* The number of Pmode words for the setjmp buffer. */
#define JMP_BUF_SIZE 50
-#define PREDICATE_CODES \
- {"reg_or_0_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
- {"call_operand_address", {LABEL_REF, SYMBOL_REF, CONST_INT, \
- CONST_DOUBLE, CONST, HIGH, CONSTANT_P_RTX}}, \
- {"indexed_memory_operand", {SUBREG, MEM}}, \
- {"symbolic_operand", {SYMBOL_REF, LABEL_REF, CONST}}, \
- {"symbolic_memory_operand", {SUBREG, MEM}}, \
- {"reg_before_reload_operand", {REG, MEM}}, \
- {"reg_or_0_or_nonsymb_mem_operand", {SUBREG, REG, MEM, CONST_INT, \
- CONST_DOUBLE}}, \
- {"move_dest_operand", {SUBREG, REG, MEM}}, \
- {"move_src_operand", {SUBREG, REG, CONSTANT_P_RTX, CONST_INT, MEM}}, \
- {"reg_or_cint_move_operand", {SUBREG, REG, CONST_INT}}, \
- {"pic_label_operand", {LABEL_REF, CONST}}, \
- {"fp_reg_operand", {REG}}, \
- {"arith_operand", {SUBREG, REG, CONST_INT}}, \
- {"arith11_operand", {SUBREG, REG, CONST_INT}}, \
- {"pre_cint_operand", {CONST_INT}}, \
- {"post_cint_operand", {CONST_INT}}, \
- {"arith_double_operand", {SUBREG, REG, CONST_DOUBLE}}, \
- {"ireg_or_int5_operand", {CONST_INT, REG}}, \
- {"int5_operand", {CONST_INT}}, \
- {"uint5_operand", {CONST_INT}}, \
- {"int11_operand", {CONST_INT}}, \
- {"uint32_operand", {CONST_INT, \
- HOST_BITS_PER_WIDE_INT > 32 ? 0 : CONST_DOUBLE}}, \
- {"arith5_operand", {SUBREG, REG, CONST_INT}}, \
- {"and_operand", {SUBREG, REG, CONST_INT}}, \
- {"ior_operand", {CONST_INT}}, \
- {"lhs_lshift_cint_operand", {CONST_INT}}, \
- {"lhs_lshift_operand", {SUBREG, REG, CONST_INT}}, \
- {"arith32_operand", {SUBREG, REG, CONST_INT}}, \
- {"pc_or_label_operand", {PC, LABEL_REF}}, \
- {"plus_xor_ior_operator", {PLUS, XOR, IOR}}, \
- {"shadd_operand", {CONST_INT}}, \
- {"div_operand", {REG, CONST_INT}}, \
- {"ireg_operand", {REG}}, \
- {"cmpib_comparison_operator", {EQ, NE, LT, LE, LEU, \
- GT, GTU, GE}}, \
- {"movb_comparison_operator", {EQ, NE, LT, GE}},
-
/* We need a libcall to canonicalize function pointers on TARGET_ELF32. */
#define CANONICALIZE_FUNCPTR_FOR_COMPARE_LIBCALL \
"__canonicalize_funcptr_for_compare"
+
+#ifdef HAVE_AS_TLS
+#undef TARGET_HAVE_TLS
+#define TARGET_HAVE_TLS true
+#endif
OSDN Git Service
