#include "config/vxworks-dummy.h"
-/* MIPS external variables defined in mips.c. */
-
-/* Which processor to schedule for. Since there is no difference between
- a R2000 and R3000 in terms of the scheduler, we collapse them into
- just an R3000. The elements of the enumeration must match exactly
- the cpu attribute in the mips.md machine description. */
-
-enum processor_type {
- PROCESSOR_R3000,
- PROCESSOR_4KC,
- PROCESSOR_4KP,
- PROCESSOR_5KC,
- PROCESSOR_5KF,
- PROCESSOR_20KC,
- PROCESSOR_24KC,
- PROCESSOR_24KF2_1,
- PROCESSOR_24KF1_1,
- PROCESSOR_74KC,
- PROCESSOR_74KF2_1,
- PROCESSOR_74KF1_1,
- PROCESSOR_74KF3_2,
- PROCESSOR_LOONGSON_2E,
- PROCESSOR_LOONGSON_2F,
- PROCESSOR_M4K,
- PROCESSOR_OCTEON,
- PROCESSOR_R3900,
- PROCESSOR_R6000,
- PROCESSOR_R4000,
- PROCESSOR_R4100,
- PROCESSOR_R4111,
- PROCESSOR_R4120,
- PROCESSOR_R4130,
- PROCESSOR_R4300,
- PROCESSOR_R4600,
- PROCESSOR_R4650,
- PROCESSOR_R5000,
- PROCESSOR_R5400,
- PROCESSOR_R5500,
- PROCESSOR_R7000,
- PROCESSOR_R8000,
- PROCESSOR_R9000,
- PROCESSOR_R10000,
- PROCESSOR_SB1,
- PROCESSOR_SB1A,
- PROCESSOR_SR71000,
- PROCESSOR_XLR,
- PROCESSOR_MAX
-};
-
-/* Costs of various operations on the different architectures. */
+#ifdef GENERATOR_FILE
+/* This is used in some insn conditions, so needs to be declared, but
+ does not need to be defined. */
+extern int target_flags_explicit;
+#endif
-struct mips_rtx_cost_data
-{
- unsigned short fp_add;
- unsigned short fp_mult_sf;
- unsigned short fp_mult_df;
- unsigned short fp_div_sf;
- unsigned short fp_div_df;
- unsigned short int_mult_si;
- unsigned short int_mult_di;
- unsigned short int_div_si;
- unsigned short int_div_di;
- unsigned short branch_cost;
- unsigned short memory_latency;
-};
+/* MIPS external variables defined in mips.c. */
/* Which ABI to use. ABI_32 (original 32, or o32), ABI_N32 (n32),
ABI_64 (n64) are all defined by SGI. ABI_O64 is o32 extended
/* The internal processor number that most closely matches this
entry. Several processors can have the same value, if there's no
difference between them from GCC's point of view. */
- enum processor_type cpu;
+ enum processor cpu;
/* The ISA level that the processor implements. */
int isa;
/* A spec that infers the -mdsp setting from an -march argument. */
#define BASE_DRIVER_SELF_SPECS \
- "%{!mno-dsp:%{march=24ke*|march=34k*|march=74k*|march=1004k*: -mdsp}}"
+ "%{!mno-dsp: \
+ %{march=24ke*|march=34k*|march=1004k*: -mdsp} \
+ %{march=74k*:%{!mno-dspr2: -mdspr2 -mdsp}}}"
#define DRIVER_SELF_SPECS BASE_DRIVER_SELF_SPECS
#define SWITCH_TAKES_ARG(CHAR) \
(DEFAULT_SWITCH_TAKES_ARG (CHAR) || (CHAR) == 'G')
-#define OVERRIDE_OPTIONS mips_override_options ()
-
#define CONDITIONAL_REGISTER_USAGE mips_conditional_register_usage ()
-
-/* Show we can debug even without a frame pointer. */
-#define CAN_DEBUG_WITHOUT_FP
\f
/* Tell collect what flags to pass to nm. */
#ifndef NM_FLAGS
#define BYTES_BIG_ENDIAN (TARGET_BIG_ENDIAN != 0)
#define WORDS_BIG_ENDIAN (TARGET_BIG_ENDIAN != 0)
-/* Define this to set the endianness to use in libgcc2.c, which can
- not depend on target_flags. */
-#if !defined(MIPSEL) && !defined(__MIPSEL__)
-#define LIBGCC2_WORDS_BIG_ENDIAN 1
-#else
-#define LIBGCC2_WORDS_BIG_ENDIAN 0
-#endif
-
#define MAX_BITS_PER_WORD 64
/* Width of a word, in units (bytes). */
/* The number of bytes in a double. */
#define UNITS_PER_DOUBLE (TYPE_PRECISION (double_type_node) / BITS_PER_UNIT)
-#define UNITS_PER_SIMD_WORD(MODE) \
- (TARGET_PAIRED_SINGLE_FLOAT ? 8 : UNITS_PER_WORD)
-
/* Set the sizes of the core types. */
#define SHORT_TYPE_SIZE 16
#define INT_TYPE_SIZE 32
Regarding coprocessor registers: without evidence to the contrary,
it's best to assume that each coprocessor register has a unique
- use. This can be overridden, in, e.g., mips_override_options or
+ use. This can be overridden, in, e.g., mips_option_override or
CONDITIONAL_REGISTER_USAGE should the assumption be inappropriate
for a particular target. */
#define HARD_FRAME_POINTER_REGNUM \
(TARGET_MIPS16 ? GP_REG_FIRST + 17 : GP_REG_FIRST + 30)
+#define HARD_FRAME_POINTER_IS_FRAME_POINTER 0
+#define HARD_FRAME_POINTER_IS_ARG_POINTER 0
+
/* Register in which static-chain is passed to a function. */
#define STATIC_CHAIN_REGNUM (GP_REG_FIRST + 15)
#define STACK_BOUNDARY (TARGET_NEWABI ? 128 : 64)
\f
-#define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0
-
/* Symbolic macros for the registers used to return integer and floating
point values. */
#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \
mips_init_cumulative_args (&CUM, FNTYPE)
-/* Update the data in CUM to advance over an argument
- of mode MODE and data type TYPE.
- (TYPE is null for libcalls where that information may not be available.) */
-
-#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
- mips_function_arg_advance (&CUM, MODE, TYPE, NAMED)
-
-/* Determine where to put an argument to a function.
- Value is zero to push the argument on the stack,
- or a hard register in which to store the argument.
-
- MODE is the argument's machine mode.
- TYPE is the data type of the argument (as a tree).
- This is null for libcalls where that information may
- not be available.
- CUM is a variable of type CUMULATIVE_ARGS which gives info about
- the preceding args and about the function being called.
- NAMED is nonzero if this argument is a named parameter
- (otherwise it is an extra parameter matching an ellipsis). */
-
-#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
- mips_function_arg (&CUM, MODE, TYPE, NAMED)
-
#define FUNCTION_ARG_BOUNDARY mips_function_arg_boundary
#define FUNCTION_ARG_PADDING(MODE, TYPE) \
(often extended) would be needed for byte accesses. */
#define SLOW_BYTE_ACCESS (!TARGET_MIPS16)
-/* Define this to be nonzero if shift instructions ignore all but the low-order
- few bits. */
-#define SHIFT_COUNT_TRUNCATED 1
+/* Standard MIPS integer shifts truncate the shift amount to the
+ width of the shifted operand. However, Loongson vector shifts
+ do not truncate the shift amount at all. */
+#define SHIFT_COUNT_TRUNCATED (!TARGET_LOONGSON_2EF)
/* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
is done just by pretending it is already truncated. */
#define FUNCTION_MODE SImode
\f
-/* A C expression for the cost of moving data from a register in
- class FROM to one in class TO. The classes are expressed using
- the enumeration values such as `GENERAL_REGS'. A value of 2 is
- the default; other values are interpreted relative to that.
-
- It is not required that the cost always equal 2 when FROM is the
- same as TO; on some machines it is expensive to move between
- registers if they are not general registers.
-
- If reload sees an insn consisting of a single `set' between two
- hard registers, and if `REGISTER_MOVE_COST' applied to their
- classes returns a value of 2, reload does not check to ensure
- that the constraints of the insn are met. Setting a cost of
- other than 2 will allow reload to verify that the constraints are
- met. You should do this if the `movM' pattern's constraints do
- not allow such copying. */
-
-#define REGISTER_MOVE_COST(MODE, FROM, TO) \
- mips_register_move_cost (MODE, FROM, TO)
-
-#define MEMORY_MOVE_COST(MODE,CLASS,TO_P) \
- (mips_cost->memory_latency \
- + memory_move_secondary_cost ((MODE), (CLASS), (TO_P)))
/* Define if copies to/from condition code registers should be avoided.
} \
while (0)
-/* How to tell the debugger about changes of source files. */
-#define ASM_OUTPUT_SOURCE_FILENAME mips_output_filename
-
/* mips-tfile does not understand .stabd directives. */
#define DBX_OUTPUT_SOURCE_LINE(STREAM, LINE, COUNTER) do { \
dbxout_begin_stabn_sline (LINE); \
extern int mips_dwarf_regno[];
extern bool mips_split_p[];
extern bool mips_split_hi_p[];
-extern enum processor_type mips_arch; /* which cpu to codegen for */
-extern enum processor_type mips_tune; /* which cpu to schedule for */
+extern enum processor mips_arch; /* which cpu to codegen for */
+extern enum processor mips_tune; /* which cpu to schedule for */
extern int mips_isa; /* architectural level */
extern int mips_abi; /* which ABI to use */
extern const struct mips_cpu_info *mips_arch_info;
extern const struct mips_cpu_info *mips_tune_info;
-extern const struct mips_rtx_cost_data *mips_cost;
extern bool mips_base_mips16;
extern enum mips_code_readable_setting mips_code_readable;
+extern GTY(()) struct target_globals *mips16_globals;
#endif
/* Enable querying of DFA units. */
#define FINAL_PRESCAN_INSN(INSN, OPVEC, NOPERANDS) \
mips_final_prescan_insn (INSN, OPVEC, NOPERANDS)
-/* This is necessary to avoid a warning about comparing different enum
- types. */
-#define mips_tune_attr ((enum attr_cpu) mips_tune)
-
/* As on most targets, we want the .eh_frame section to be read-only where
possible. And as on most targets, this means two things:
support this feature. */
#define ASM_PREFERRED_EH_DATA_FORMAT(CODE,GLOBAL) \
(((GLOBAL) ? DW_EH_PE_indirect : 0) | DW_EH_PE_absptr)
+
+/* For switching between MIPS16 and non-MIPS16 modes. */
+#define SWITCHABLE_TARGET 1
OSDN Git Service
