You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
+the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+Boston, MA 02110-1301, USA. */
/* MIPS external variables defined in mips.c. */
the cpu attribute in the mips.md machine description. */
enum processor_type {
- PROCESSOR_DEFAULT,
+ PROCESSOR_R3000,
PROCESSOR_4KC,
+ PROCESSOR_4KP,
PROCESSOR_5KC,
+ PROCESSOR_5KF,
PROCESSOR_20KC,
+ PROCESSOR_24K,
+ PROCESSOR_24KX,
PROCESSOR_M4K,
- PROCESSOR_R3000,
PROCESSOR_R3900,
PROCESSOR_R6000,
PROCESSOR_R4000,
PROCESSOR_R8000,
PROCESSOR_R9000,
PROCESSOR_SB1,
- PROCESSOR_SR71000
+ PROCESSOR_SR71000,
+ PROCESSOR_MAX
+};
+
+/* Costs of various operations on the different architectures. */
+
+struct mips_rtx_cost_data
+{
+ unsigned short fp_add;
+ unsigned short fp_mult_sf;
+ unsigned short fp_mult_df;
+ unsigned short fp_div_sf;
+ unsigned short fp_div_df;
+ unsigned short int_mult_si;
+ unsigned short int_mult_di;
+ unsigned short int_div_si;
+ unsigned short int_div_di;
+ unsigned short branch_cost;
+ unsigned short memory_latency;
};
/* Which ABI to use. ABI_32 (original 32, or o32), ABI_N32 (n32),
extern int mips_isa; /* architectural level */
extern int mips_abi; /* which ABI to use */
extern int mips16_hard_float; /* mips16 without -msoft-float */
-extern const char *mips_cache_flush_func;/* for -mflush-func= and -mno-flush-func */
extern const struct mips_cpu_info mips_cpu_info_table[];
extern const struct mips_cpu_info *mips_arch_info;
extern const struct mips_cpu_info *mips_tune_info;
+extern const struct mips_rtx_cost_data *mips_cost;
/* Macros to silence warnings about numbers being signed in traditional
C and unsigned in ISO C when compiled on 32-bit hosts. */
We therefore disable GP-relative switch tables for n64 on IRIX targets. */
#define TARGET_GPWORD (TARGET_ABICALLS && !(mips_abi == ABI_64 && TARGET_IRIX))
- /* Generate mips16 code */
+/* Generate mips16 code */
#define TARGET_MIPS16 ((target_flags & MASK_MIPS16) != 0)
+/* Generate mips16e code. Default 16bit ASE for mips32/mips32r2/mips64 */
+#define GENERATE_MIPS16E (TARGET_MIPS16 && mips_isa >= 32)
/* Generic ISA defines. */
#define ISA_MIPS1 (mips_isa == 1)
if (TARGET_MIPS3D) \
builtin_define ("__mips3d"); \
\
+ if (TARGET_DSP) \
+ builtin_define ("__mips_dsp"); \
+ \
MIPS_CPP_SET_PROCESSOR ("_MIPS_ARCH", mips_arch_info); \
MIPS_CPP_SET_PROCESSOR ("_MIPS_TUNE", mips_tune_info); \
\
&& (ISA_MIPS32R2 \
))
+/* ISA includes the MIPS32/64 rev 2 ext and ins instructions. */
+#define ISA_HAS_EXT_INS (!TARGET_MIPS16 \
+ && (ISA_MIPS32R2 \
+ ))
+
/* True if the result of a load is not available to the next instruction.
A nop will then be needed between instructions like "lw $4,..."
and "addiu $4,$4,1". */
%{mips32} %{mips32r2} %{mips64} \
%{mips16:%{!mno-mips16:-mips16}} %{mno-mips16:-no-mips16} \
%{mips3d:-mips3d} \
+%{mdsp} \
%{mfix-vr4120} %{mfix-vr4130} \
%(subtarget_asm_optimizing_spec) \
%(subtarget_asm_debugging_spec) \
/* Width of a word, in units (bytes). */
#define UNITS_PER_WORD (TARGET_64BIT ? 8 : 4)
+#ifndef IN_LIBGCC2
#define MIN_UNITS_PER_WORD 4
+#endif
/* For MIPS, width of a floating point register. */
#define UNITS_PER_FPREG (TARGET_FLOAT64 ? 8 : 4)
/* The number of bytes in a double. */
#define UNITS_PER_DOUBLE (TYPE_PRECISION (double_type_node) / BITS_PER_UNIT)
-#define UNITS_PER_SIMD_WORD (TARGET_PAIRED_SINGLE_FLOAT ? 8 : 0)
+#define UNITS_PER_SIMD_WORD (TARGET_PAIRED_SINGLE_FLOAT ? 8 : UNITS_PER_WORD)
/* Set the sizes of the core types. */
#define SHORT_TYPE_SIZE 16
-#define INT_TYPE_SIZE (TARGET_INT64 ? 64 : 32)
+#define INT_TYPE_SIZE 32
#define LONG_TYPE_SIZE (TARGET_LONG64 ? 64 : 32)
#define LONG_LONG_TYPE_SIZE 64
/* Define if loading short immediate values into registers sign extends. */
#define SHORT_IMMEDIATES_SIGN_EXTEND
+
+/* The [d]clz instructions have the natural values at 0. */
+
+#define CLZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) \
+ ((VALUE) = GET_MODE_BITSIZE (MODE), true)
\f
/* Standard register usage. */
- ARG_POINTER_REGNUM
- FRAME_POINTER_REGNUM
- FAKE_CALL_REGNO (see the comment above load_callsi for details)
- - 3 dummy entries that were used at various times in the past. */
+ - 3 dummy entries that were used at various times in the past.
+ - 6 DSP accumulator registers (3 hi-lo pairs) for MIPS DSP ASE
+ - 6 DSP control registers */
-#define FIRST_PSEUDO_REGISTER 176
+#define FIRST_PSEUDO_REGISTER 188
/* By default, fix the kernel registers ($26 and $27), the global
pointer ($28) and the stack pointer ($29). This can change
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
/* COP3 registers */ \
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 \
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
+ /* 6 DSP accumulator registers & 6 control registers */ \
+ 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1 \
}
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
/* COP3 registers */ \
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 \
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
+ /* 6 DSP accumulator registers & 6 control registers */ \
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 \
}
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
/* COP3 registers */ \
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 \
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
+ /* 6 DSP accumulator registers & 6 control registers */ \
+ 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0 \
}
/* Internal macros to classify a register number as to whether it's a
/* ALL_COP_REG_NUM assumes that COP0,2,and 3 are numbered consecutively. */
#define ALL_COP_REG_NUM (COP3_REG_LAST - COP0_REG_FIRST + 1)
+#define DSP_ACC_REG_FIRST 176
+#define DSP_ACC_REG_LAST 181
+#define DSP_ACC_REG_NUM (DSP_ACC_REG_LAST - DSP_ACC_REG_FIRST + 1)
+
#define AT_REGNUM (GP_REG_FIRST + 1)
#define HI_REGNUM (MD_REG_FIRST + 0)
#define LO_REGNUM (MD_REG_FIRST + 1)
+#define AC1HI_REGNUM (DSP_ACC_REG_FIRST + 0)
+#define AC1LO_REGNUM (DSP_ACC_REG_FIRST + 1)
+#define AC2HI_REGNUM (DSP_ACC_REG_FIRST + 2)
+#define AC2LO_REGNUM (DSP_ACC_REG_FIRST + 3)
+#define AC3HI_REGNUM (DSP_ACC_REG_FIRST + 4)
+#define AC3LO_REGNUM (DSP_ACC_REG_FIRST + 5)
/* FPSW_REGNUM is the single condition code used if !ISA_HAS_8CC.
If ISA_HAS_8CC, it should not be used, and an arbitrary ST_REG
((unsigned int) ((int) (REGNO) - COP3_REG_FIRST) < COP3_REG_NUM)
#define ALL_COP_REG_P(REGNO) \
((unsigned int) ((int) (REGNO) - COP0_REG_FIRST) < ALL_COP_REG_NUM)
+/* Test if REGNO is one of the 6 new DSP accumulators. */
+#define DSP_ACC_REG_P(REGNO) \
+ ((unsigned int) ((int) (REGNO) - DSP_ACC_REG_FIRST) < DSP_ACC_REG_NUM)
+/* Test if REGNO is hi, lo, or one of the 6 new DSP accumulators. */
+#define ACC_REG_P(REGNO) \
+ (MD_REG_P (REGNO) || DSP_ACC_REG_P (REGNO))
+/* Test if REGNO is HI or the first register of 3 new DSP accumulator pairs. */
+#define ACC_HI_REG_P(REGNO) \
+ ((REGNO) == HI_REGNUM || (REGNO) == AC1HI_REGNUM || (REGNO) == AC2HI_REGNUM \
+ || (REGNO) == AC3HI_REGNUM)
#define FP_REG_RTX_P(X) (REG_P (X) && FP_REG_P (REGNO (X)))
ALL_COP_REGS,
ALL_COP_AND_GR_REGS,
ST_REGS, /* status registers (fp status) */
+ DSP_ACC_REGS, /* DSP accumulator registers */
+ ACC_REGS, /* Hi/Lo and DSP accumulator registers */
ALL_REGS, /* all registers */
LIM_REG_CLASSES /* max value + 1 */
};
"ALL_COP_REGS", \
"ALL_COP_AND_GR_REGS", \
"ST_REGS", \
+ "DSP_ACC_REGS", \
+ "ACC_REGS", \
"ALL_REGS" \
}
{ 0x00000000, 0x00000000, 0xffff0000, 0xffffffff, 0xffffffff, 0x0000ffff }, \
{ 0xffffffff, 0x00000000, 0xffff0000, 0xffffffff, 0xffffffff, 0x0000ffff }, \
{ 0x00000000, 0x00000000, 0x000007f8, 0x00000000, 0x00000000, 0x00000000 }, /* status registers */ \
- { 0xffffffff, 0xffffffff, 0xffff07ff, 0xffffffff, 0xffffffff, 0x0000ffff } /* all registers */ \
+ { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x003f0000 }, /* dsp accumulator registers */ \
+ { 0x00000000, 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x003f0000 }, /* hi/lo and dsp accumulator registers */ \
+ { 0xffffffff, 0xffffffff, 0xffff07ff, 0xffffffff, 0xffffffff, 0x0fffffff } /* all registers */ \
}
112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127, \
128,129,130,131,132,133,134,135,136,137,138,139,140,141,142,143, \
144,145,146,147,148,149,150,151,152,153,154,155,156,157,158,159, \
- 160,161,162,163,164,165,166,167,168,169,170,171,172,173,174,175 \
+ 160,161,162,163,164,165,166,167,168,169,170,171,172,173,174,175, \
+ 176,177,178,179,180,181,182,183,184,185,186,187 \
}
/* ORDER_REGS_FOR_LOCAL_ALLOC is a macro which permits reg_alloc_order
#define ORDER_REGS_FOR_LOCAL_ALLOC mips_order_regs_for_local_alloc ()
-/* REGISTER AND CONSTANT CLASSES */
+/* True if VALUE is an unsigned 6-bit number. */
-/* Get reg_class from a letter such as appears in the machine
- description.
+#define UIMM6_OPERAND(VALUE) \
+ (((VALUE) & ~(unsigned HOST_WIDE_INT) 0x3f) == 0)
- DEFINED REGISTER CLASSES:
+/* True if VALUE is a signed 10-bit number. */
- 'd' General (aka integer) registers
- Normally this is GR_REGS, but in mips16 mode this is M16_REGS
- 'y' General registers (in both mips16 and non mips16 mode)
- 'e' Effective address registers (general registers except $25)
- 't' mips16 temporary register ($24)
- 'f' Floating point registers
- 'h' Hi register
- 'l' Lo register
- 'v' $v1 only
- 'x' Multiply/divide registers
- 'z' FP Status register
- 'B' Cop0 register
- 'C' Cop2 register
- 'D' Cop3 register
- 'b' All registers */
-
-extern enum reg_class mips_char_to_class[256];
-
-#define REG_CLASS_FROM_LETTER(C) mips_char_to_class[(unsigned char)(C)]
+#define IMM10_OPERAND(VALUE) \
+ ((unsigned HOST_WIDE_INT) (VALUE) + 0x200 < 0x400)
/* True if VALUE is a signed 16-bit number. */
#define SMALL_INT_UNSIGNED(X) SMALL_OPERAND_UNSIGNED (INTVAL (X))
#define LUI_INT(X) LUI_OPERAND (INTVAL (X))
-/* The letters I, J, K, L, M, N, O, and P in a register constraint
- string can be used to stand for particular ranges of immediate
- operands. This macro defines what the ranges are. C is the
- letter, and VALUE is a constant value. Return 1 if VALUE is
- in the range specified by C. */
-
-/* For MIPS:
-
- `I' is used for the range of constants an arithmetic insn can
- actually contain (16 bits signed integers).
-
- `J' is used for the range which is just zero (i.e., $r0).
-
- `K' is used for the range of constants a logical insn can actually
- contain (16 bit zero-extended integers).
-
- `L' is used for the range of constants that be loaded with lui
- (i.e., the bottom 16 bits are zero).
-
- `M' is used for the range of constants that take two words to load
- (i.e., not matched by `I', `K', and `L').
-
- `N' is used for negative 16 bit constants other than -65536.
-
- `O' is a 15 bit signed integer.
-
- `P' is used for positive 16 bit constants. */
-
-#define CONST_OK_FOR_LETTER_P(VALUE, C) \
- ((C) == 'I' ? SMALL_OPERAND (VALUE) \
- : (C) == 'J' ? ((VALUE) == 0) \
- : (C) == 'K' ? SMALL_OPERAND_UNSIGNED (VALUE) \
- : (C) == 'L' ? LUI_OPERAND (VALUE) \
- : (C) == 'M' ? (!SMALL_OPERAND (VALUE) \
- && !SMALL_OPERAND_UNSIGNED (VALUE) \
- && !LUI_OPERAND (VALUE)) \
- : (C) == 'N' ? ((unsigned HOST_WIDE_INT) ((VALUE) + 0xffff) < 0xffff) \
- : (C) == 'O' ? ((unsigned HOST_WIDE_INT) ((VALUE) + 0x4000) < 0x8000) \
- : (C) == 'P' ? ((VALUE) != 0 && (((VALUE) & ~0x0000ffff) == 0)) \
- : 0)
-
-/* Similar, but for floating constants, and defining letters G and H.
- Here VALUE is the CONST_DOUBLE rtx itself. */
-
-/* For Mips
-
- 'G' : Floating point 0 */
-
-#define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
- ((C) == 'G' \
- && (VALUE) == CONST0_RTX (GET_MODE (VALUE)))
-
-/* Letters in the range `Q' through `U' may be defined in a
- machine-dependent fashion to stand for arbitrary operand types.
- The machine description macro `EXTRA_CONSTRAINT' is passed the
- operand as its first argument and the constraint letter as its
- second operand.
-
- `Q' is for signed 16-bit constants.
- `R' is for single-instruction memory references. Note that this
- constraint has often been used in linux and glibc code.
- `S' is for legitimate constant call addresses.
- `T' is for constant move_operands that cannot be safely loaded into $25.
- `U' is for constant move_operands that can be safely loaded into $25.
- `W' is for memory references that are based on a member of BASE_REG_CLASS.
- This is true for all non-mips16 references (although it can sometimes
- be indirect if !TARGET_EXPLICIT_RELOCS). For mips16, it excludes
- stack and constant-pool references.
- `YG' is for 0 valued vector constants. */
-
-#define EXTRA_CONSTRAINT_Y(OP,STR) \
- (((STR)[1] == 'G') ? (GET_CODE (OP) == CONST_VECTOR \
- && (OP) == CONST0_RTX (GET_MODE (OP))) \
- : FALSE)
-
-
-#define EXTRA_CONSTRAINT_STR(OP,CODE,STR) \
- (((CODE) == 'Q') ? const_arith_operand (OP, VOIDmode) \
- : ((CODE) == 'R') ? (MEM_P (OP) \
- && mips_fetch_insns (OP) == 1) \
- : ((CODE) == 'S') ? (CONSTANT_P (OP) \
- && call_insn_operand (OP, VOIDmode)) \
- : ((CODE) == 'T') ? (CONSTANT_P (OP) \
- && move_operand (OP, VOIDmode) \
- && mips_dangerous_for_la25_p (OP)) \
- : ((CODE) == 'U') ? (CONSTANT_P (OP) \
- && move_operand (OP, VOIDmode) \
- && !mips_dangerous_for_la25_p (OP)) \
- : ((CODE) == 'W') ? (MEM_P (OP) \
- && memory_operand (OP, VOIDmode) \
- && (!TARGET_MIPS16 \
- || (!stack_operand (OP, VOIDmode) \
- && !CONSTANT_P (XEXP (OP, 0))))) \
- : ((CODE) == 'Y') ? EXTRA_CONSTRAINT_Y (OP, STR) \
- : FALSE)
-
-/* Y is the only multi-letter constraint, and has length 2. */
-
-#define CONSTRAINT_LEN(C,STR) \
- (((C) == 'Y') ? 2 \
- : DEFAULT_CONSTRAINT_LEN (C, STR))
-
-/* Say which of the above are memory constraints. */
-#define EXTRA_MEMORY_CONSTRAINT(C, STR) ((C) == 'R' || (C) == 'W')
-
#define PREFERRED_RELOAD_CLASS(X,CLASS) \
mips_preferred_reload_class (X, CLASS)
else \
asm_fprintf ((FILE), "%U%s", (NAME))
\f
+/* Flag to mark a function decl symbol that requires a long call. */
+#define SYMBOL_FLAG_LONG_CALL (SYMBOL_FLAG_MACH_DEP << 0)
+#define SYMBOL_REF_LONG_CALL_P(X) \
+ ((SYMBOL_REF_FLAGS (X) & SYMBOL_FLAG_LONG_CALL) != 0)
+
/* Specify the machine mode that this machine uses
for the index in the tablejump instruction.
??? Using HImode in mips16 mode can cause overflow. */
#define REGISTER_MOVE_COST(MODE, FROM, TO) \
mips_register_move_cost (MODE, FROM, TO)
-/* ??? Fix this to be right for the R8000. */
#define MEMORY_MOVE_COST(MODE,CLASS,TO_P) \
- (((TUNE_MIPS4000 || TUNE_MIPS6000) ? 6 : 4) \
+ (mips_cost->memory_latency \
+ memory_move_secondary_cost ((MODE), (CLASS), (TO_P)))
/* Define if copies to/from condition code registers should be avoided.
/* A C expression for the cost of a branch instruction. A value of
1 is the default; other values are interpreted relative to that. */
-/* ??? Fix this to be right for the R8000. */
-#define BRANCH_COST \
- ((! TARGET_MIPS16 \
- && (TUNE_MIPS4000 || TUNE_MIPS6000)) \
- ? 2 : 1)
+#define BRANCH_COST mips_cost->branch_cost
+#define LOGICAL_OP_NON_SHORT_CIRCUIT 0
/* If defined, modifies the length assigned to instruction INSN as a
function of the context in which it is used. LENGTH is an lvalue
"$c3r0", "$c3r1", "$c3r2", "$c3r3", "$c3r4", "$c3r5", "$c3r6", "$c3r7", \
"$c3r8", "$c3r9", "$c3r10","$c3r11","$c3r12","$c3r13","$c3r14","$c3r15", \
"$c3r16","$c3r17","$c3r18","$c3r19","$c3r20","$c3r21","$c3r22","$c3r23", \
- "$c3r24","$c3r25","$c3r26","$c3r27","$c3r28","$c3r29","$c3r30","$c3r31" }
+ "$c3r24","$c3r25","$c3r26","$c3r27","$c3r28","$c3r29","$c3r30","$c3r31", \
+ "$ac1hi","$ac1lo","$ac2hi","$ac2lo","$ac3hi","$ac3lo","$dsp_po","$dsp_sc", \
+ "$dsp_ca","$dsp_ou","$dsp_cc","$dsp_ef" }
/* List the "software" names for each register. Also list the numerical
names for $fp and $sp. */
{ \
const char *p = STRING; \
int size = strlen (p) + 1; \
- readonly_data_section (); \
+ switch_to_section (readonly_data_section); \
assemble_string (p, size); \
}
\f
/* Define the strings to put out for each section in the object file. */
#define TEXT_SECTION_ASM_OP "\t.text" /* instructions */
#define DATA_SECTION_ASM_OP "\t.data" /* large data */
-#define SDATA_SECTION_ASM_OP "\t.sdata" /* small data */
#undef READONLY_DATA_SECTION_ASM_OP
#define READONLY_DATA_SECTION_ASM_OP "\t.rdata" /* read-only data */
OSDN Git Service
