(match_dup 2))))]
"TARGET_64BIT && ix86_match_ccmode (insn, CCmode)
&& ix86_binary_operator_ok (MINUS, SImode, operands)"
- "sub{q}\t{%2, %0|%0, %2}"
+ "sub{l}\t{%2, %1|%1, %2}"
[(set_attr "type" "alu")
(set_attr "mode" "DI")])
(define_insn "*negsf2_1"
[(set (match_operand:SF 0 "register_operand" "=f")
(neg:SF (match_operand:SF 1 "register_operand" "0")))]
- "TARGET_80387 && reload_completed"
+ "TARGET_80387 && (reload_completed || !TARGET_SSE_MATH)"
"fchs"
[(set_attr "type" "fsgn")
(set_attr "mode" "SF")])
(define_insn "*negdf2_1"
[(set (match_operand:DF 0 "register_operand" "=f")
(neg:DF (match_operand:DF 1 "register_operand" "0")))]
- "TARGET_80387 && reload_completed"
+ "TARGET_80387 && (reload_completed || !(TARGET_SSE2 && TARGET_SSE_MATH))"
"fchs"
[(set_attr "type" "fsgn")
(set_attr "mode" "DF")])
(define_insn "*negxf2_1"
[(set (match_operand:XF 0 "register_operand" "=f")
(neg:XF (match_operand:XF 1 "register_operand" "0")))]
- "TARGET_80387 && reload_completed"
+ "TARGET_80387"
"fchs"
[(set_attr "type" "fsgn")
(set_attr "mode" "XF")])
(define_insn "*abssf2_1"
[(set (match_operand:SF 0 "register_operand" "=f")
(abs:SF (match_operand:SF 1 "register_operand" "0")))]
- "TARGET_80387 && reload_completed"
+ "TARGET_80387 && (reload_completed || !TARGET_SSE_MATH)"
"fabs"
[(set_attr "type" "fsgn")
(set_attr "mode" "SF")])
(define_insn "*absdf2_1"
[(set (match_operand:DF 0 "register_operand" "=f")
(abs:DF (match_operand:DF 1 "register_operand" "0")))]
- "TARGET_80387 && reload_completed"
+ "TARGET_80387 && (reload_completed || !(TARGET_SSE2 && TARGET_SSE_MATH))"
"fabs"
[(set_attr "type" "fsgn")
(set_attr "mode" "DF")])
(define_insn "*absxf2_1"
[(set (match_operand:XF 0 "register_operand" "=f")
(abs:XF (match_operand:XF 1 "register_operand" "0")))]
- "TARGET_80387 && reload_completed"
+ "TARGET_80387"
"fabs"
[(set_attr "type" "fsgn")
(set_attr "mode" "DF")])
(const_string "ishift")))
(set_attr "mode" "DI")])
+(define_insn "*ashldi3_cconly_rex64"
+ [(set (reg FLAGS_REG)
+ (compare
+ (ashift:DI (match_operand:DI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "immediate_operand" "e"))
+ (const_int 0)))
+ (clobber (match_scratch:DI 0 "=r"))]
+ "TARGET_64BIT && ix86_match_ccmode (insn, CCGOCmode)
+ && ix86_binary_operator_ok (ASHIFT, DImode, operands)"
+{
+ switch (get_attr_type (insn))
+ {
+ case TYPE_ALU:
+ gcc_assert (operands[2] == const1_rtx);
+ return "add{q}\t{%0, %0|%0, %0}";
+
+ default:
+ if (REG_P (operands[2]))
+ return "sal{q}\t{%b2, %0|%0, %b2}";
+ else if (operands[2] == const1_rtx
+ && (TARGET_SHIFT1 || optimize_size))
+ return "sal{q}\t%0";
+ else
+ return "sal{q}\t{%2, %0|%0, %2}";
+ }
+}
+ [(set (attr "type")
+ (cond [(and (and (ne (symbol_ref "TARGET_DOUBLE_WITH_ADD")
+ (const_int 0))
+ (match_operand 0 "register_operand" ""))
+ (match_operand 2 "const1_operand" ""))
+ (const_string "alu")
+ ]
+ (const_string "ishift")))
+ (set_attr "mode" "DI")])
+
(define_insn "*ashldi3_1"
[(set (match_operand:DI 0 "register_operand" "=&r,r")
(ashift:DI (match_operand:DI 1 "reg_or_pm1_operand" "n,0")
(const_string "ishift")))
(set_attr "mode" "SI")])
+(define_insn "*ashlsi3_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (ashift:SI (match_operand:SI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const_1_to_31_operand" "I"))
+ (const_int 0)))
+ (clobber (match_scratch:SI 0 "=r"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && ix86_binary_operator_ok (ASHIFT, SImode, operands)"
+{
+ switch (get_attr_type (insn))
+ {
+ case TYPE_ALU:
+ gcc_assert (operands[2] == const1_rtx);
+ return "add{l}\t{%0, %0|%0, %0}";
+
+ default:
+ if (REG_P (operands[2]))
+ return "sal{l}\t{%b2, %0|%0, %b2}";
+ else if (operands[2] == const1_rtx
+ && (TARGET_SHIFT1 || optimize_size))
+ return "sal{l}\t%0";
+ else
+ return "sal{l}\t{%2, %0|%0, %2}";
+ }
+}
+ [(set (attr "type")
+ (cond [(and (and (ne (symbol_ref "TARGET_DOUBLE_WITH_ADD")
+ (const_int 0))
+ (match_operand 0 "register_operand" ""))
+ (match_operand 2 "const1_operand" ""))
+ (const_string "alu")
+ ]
+ (const_string "ishift")))
+ (set_attr "mode" "SI")])
+
(define_insn "*ashlsi3_cmp_zext"
[(set (reg FLAGS_REG)
(compare
(const_string "ishift")))
(set_attr "mode" "HI")])
+(define_insn "*ashlhi3_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (ashift:HI (match_operand:HI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const_1_to_31_operand" "I"))
+ (const_int 0)))
+ (clobber (match_scratch:HI 0 "=r"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && ix86_binary_operator_ok (ASHIFT, HImode, operands)"
+{
+ switch (get_attr_type (insn))
+ {
+ case TYPE_ALU:
+ gcc_assert (operands[2] == const1_rtx);
+ return "add{w}\t{%0, %0|%0, %0}";
+
+ default:
+ if (REG_P (operands[2]))
+ return "sal{w}\t{%b2, %0|%0, %b2}";
+ else if (operands[2] == const1_rtx
+ && (TARGET_SHIFT1 || optimize_size))
+ return "sal{w}\t%0";
+ else
+ return "sal{w}\t{%2, %0|%0, %2}";
+ }
+}
+ [(set (attr "type")
+ (cond [(and (and (ne (symbol_ref "TARGET_DOUBLE_WITH_ADD")
+ (const_int 0))
+ (match_operand 0 "register_operand" ""))
+ (match_operand 2 "const1_operand" ""))
+ (const_string "alu")
+ ]
+ (const_string "ishift")))
+ (set_attr "mode" "HI")])
+
(define_expand "ashlqi3"
[(set (match_operand:QI 0 "nonimmediate_operand" "")
(ashift:QI (match_operand:QI 1 "nonimmediate_operand" "")
(const_string "ishift")))
(set_attr "mode" "QI")])
+(define_insn "*ashlqi3_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (ashift:QI (match_operand:QI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const_1_to_31_operand" "I"))
+ (const_int 0)))
+ (clobber (match_scratch:QI 0 "=q"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && ix86_binary_operator_ok (ASHIFT, QImode, operands)"
+{
+ switch (get_attr_type (insn))
+ {
+ case TYPE_ALU:
+ gcc_assert (operands[2] == const1_rtx);
+ return "add{b}\t{%0, %0|%0, %0}";
+
+ default:
+ if (REG_P (operands[2]))
+ return "sal{b}\t{%b2, %0|%0, %b2}";
+ else if (operands[2] == const1_rtx
+ && (TARGET_SHIFT1 || optimize_size))
+ return "sal{b}\t%0";
+ else
+ return "sal{b}\t{%2, %0|%0, %2}";
+ }
+}
+ [(set (attr "type")
+ (cond [(and (and (ne (symbol_ref "TARGET_DOUBLE_WITH_ADD")
+ (const_int 0))
+ (match_operand 0 "register_operand" ""))
+ (match_operand 2 "const1_operand" ""))
+ (const_string "alu")
+ ]
+ (const_string "ishift")))
+ (set_attr "mode" "QI")])
+
;; See comment above `ashldi3' about how this works.
(define_expand "ashrti3"
(const_string "2")
(const_string "*")))])
+(define_insn "*ashrdi3_one_bit_cconly_rex64"
+ [(set (reg FLAGS_REG)
+ (compare
+ (ashiftrt:DI (match_operand:DI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const1_operand" ""))
+ (const_int 0)))
+ (clobber (match_scratch:DI 0 "=r"))]
+ "TARGET_64BIT && ix86_match_ccmode (insn, CCGOCmode)
+ && (TARGET_SHIFT1 || optimize_size)
+ && ix86_binary_operator_ok (ASHIFTRT, DImode, operands)"
+ "sar{q}\t%0"
+ [(set_attr "type" "ishift")
+ (set_attr "length" "2")])
+
;; This pattern can't accept a variable shift count, since shifts by
;; zero don't affect the flags. We assume that shifts by constant
;; zero are optimized away.
[(set_attr "type" "ishift")
(set_attr "mode" "DI")])
+(define_insn "*ashrdi3_cconly_rex64"
+ [(set (reg FLAGS_REG)
+ (compare
+ (ashiftrt:DI (match_operand:DI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const_int_operand" "n"))
+ (const_int 0)))
+ (clobber (match_scratch:DI 0 "=r"))]
+ "TARGET_64BIT && ix86_match_ccmode (insn, CCGOCmode)
+ && ix86_binary_operator_ok (ASHIFTRT, DImode, operands)"
+ "sar{q}\t{%2, %0|%0, %2}"
+ [(set_attr "type" "ishift")
+ (set_attr "mode" "DI")])
+
(define_insn "*ashrdi3_1"
[(set (match_operand:DI 0 "register_operand" "=r")
(ashiftrt:DI (match_operand:DI 1 "register_operand" "0")
(const_string "2")
(const_string "*")))])
+(define_insn "*ashrsi3_one_bit_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (ashiftrt:SI (match_operand:SI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const1_operand" ""))
+ (const_int 0)))
+ (clobber (match_scratch:SI 0 "=r"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && (TARGET_SHIFT1 || optimize_size)
+ && ix86_binary_operator_ok (ASHIFTRT, SImode, operands)"
+ "sar{l}\t%0"
+ [(set_attr "type" "ishift")
+ (set_attr "length" "2")])
+
(define_insn "*ashrsi3_one_bit_cmp_zext"
[(set (reg FLAGS_REG)
(compare
[(set_attr "type" "ishift")
(set_attr "mode" "SI")])
+(define_insn "*ashrsi3_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (ashiftrt:SI (match_operand:SI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const_1_to_31_operand" "I"))
+ (const_int 0)))
+ (clobber (match_scratch:SI 0 "=r"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && ix86_binary_operator_ok (ASHIFTRT, SImode, operands)"
+ "sar{l}\t{%2, %0|%0, %2}"
+ [(set_attr "type" "ishift")
+ (set_attr "mode" "SI")])
+
(define_insn "*ashrsi3_cmp_zext"
[(set (reg FLAGS_REG)
(compare
(const_string "2")
(const_string "*")))])
+(define_insn "*ashrhi3_one_bit_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (ashiftrt:HI (match_operand:HI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const1_operand" ""))
+ (const_int 0)))
+ (clobber (match_scratch:HI 0 "=r"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && (TARGET_SHIFT1 || optimize_size)
+ && ix86_binary_operator_ok (ASHIFTRT, HImode, operands)"
+ "sar{w}\t%0"
+ [(set_attr "type" "ishift")
+ (set_attr "length" "2")])
+
;; This pattern can't accept a variable shift count, since shifts by
;; zero don't affect the flags. We assume that shifts by constant
;; zero are optimized away.
[(set_attr "type" "ishift")
(set_attr "mode" "HI")])
+(define_insn "*ashrhi3_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (ashiftrt:HI (match_operand:HI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const_1_to_31_operand" "I"))
+ (const_int 0)))
+ (clobber (match_scratch:HI 0 "=r"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && ix86_binary_operator_ok (ASHIFTRT, HImode, operands)"
+ "sar{w}\t{%2, %0|%0, %2}"
+ [(set_attr "type" "ishift")
+ (set_attr "mode" "HI")])
+
(define_expand "ashrqi3"
[(set (match_operand:QI 0 "nonimmediate_operand" "")
(ashiftrt:QI (match_operand:QI 1 "nonimmediate_operand" "")
(const_string "2")
(const_string "*")))])
+(define_insn "*ashrqi3_one_bit_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (ashiftrt:QI (match_operand:QI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const1_operand" "I"))
+ (const_int 0)))
+ (clobber (match_scratch:QI 0 "=q"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && (TARGET_SHIFT1 || optimize_size)
+ && ix86_binary_operator_ok (ASHIFTRT, QImode, operands)"
+ "sar{b}\t%0"
+ [(set_attr "type" "ishift")
+ (set_attr "length" "2")])
+
;; This pattern can't accept a variable shift count, since shifts by
;; zero don't affect the flags. We assume that shifts by constant
;; zero are optimized away.
"sar{b}\t{%2, %0|%0, %2}"
[(set_attr "type" "ishift")
(set_attr "mode" "QI")])
+
+(define_insn "*ashrqi3_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (ashiftrt:QI (match_operand:QI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const_1_to_31_operand" "I"))
+ (const_int 0)))
+ (clobber (match_scratch:QI 0 "=q"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && ix86_binary_operator_ok (ASHIFTRT, QImode, operands)"
+ "sar{b}\t{%2, %0|%0, %2}"
+ [(set_attr "type" "ishift")
+ (set_attr "mode" "QI")])
+
\f
;; Logical shift instructions
(const_string "2")
(const_string "*")))])
+(define_insn "*lshrdi3_cconly_one_bit_rex64"
+ [(set (reg FLAGS_REG)
+ (compare
+ (lshiftrt:DI (match_operand:DI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const1_operand" ""))
+ (const_int 0)))
+ (clobber (match_scratch:DI 0 "=r"))]
+ "TARGET_64BIT && ix86_match_ccmode (insn, CCGOCmode)
+ && (TARGET_SHIFT1 || optimize_size)
+ && ix86_binary_operator_ok (LSHIFTRT, HImode, operands)"
+ "shr{q}\t%0"
+ [(set_attr "type" "ishift")
+ (set_attr "length" "2")])
+
;; This pattern can't accept a variable shift count, since shifts by
;; zero don't affect the flags. We assume that shifts by constant
;; zero are optimized away.
[(set_attr "type" "ishift")
(set_attr "mode" "DI")])
+(define_insn "*lshrdi3_cconly_rex64"
+ [(set (reg FLAGS_REG)
+ (compare
+ (lshiftrt:DI (match_operand:DI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const_int_operand" "e"))
+ (const_int 0)))
+ (clobber (match_scratch:DI 0 "=r"))]
+ "TARGET_64BIT && ix86_match_ccmode (insn, CCGOCmode)
+ && ix86_binary_operator_ok (LSHIFTRT, HImode, operands)"
+ "shr{q}\t{%2, %0|%0, %2}"
+ [(set_attr "type" "ishift")
+ (set_attr "mode" "DI")])
+
(define_insn "*lshrdi3_1"
[(set (match_operand:DI 0 "register_operand" "=r")
(lshiftrt:DI (match_operand:DI 1 "register_operand" "0")
(const_string "2")
(const_string "*")))])
+(define_insn "*lshrsi3_one_bit_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (lshiftrt:SI (match_operand:SI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const1_operand" ""))
+ (const_int 0)))
+ (clobber (match_scratch:SI 0 "=r"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && (TARGET_SHIFT1 || optimize_size)
+ && ix86_binary_operator_ok (LSHIFTRT, HImode, operands)"
+ "shr{l}\t%0"
+ [(set_attr "type" "ishift")
+ (set_attr "length" "2")])
+
(define_insn "*lshrsi3_cmp_one_bit_zext"
[(set (reg FLAGS_REG)
(compare
[(set_attr "type" "ishift")
(set_attr "mode" "SI")])
+(define_insn "*lshrsi3_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (lshiftrt:SI (match_operand:SI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const_1_to_31_operand" "I"))
+ (const_int 0)))
+ (clobber (match_scratch:SI 0 "=r"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && ix86_binary_operator_ok (LSHIFTRT, HImode, operands)"
+ "shr{l}\t{%2, %0|%0, %2}"
+ [(set_attr "type" "ishift")
+ (set_attr "mode" "SI")])
+
(define_insn "*lshrsi3_cmp_zext"
[(set (reg FLAGS_REG)
(compare
(const_string "2")
(const_string "*")))])
+(define_insn "*lshrhi3_one_bit_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (lshiftrt:HI (match_operand:HI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const1_operand" ""))
+ (const_int 0)))
+ (clobber (match_scratch:HI 0 "=r"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && (TARGET_SHIFT1 || optimize_size)
+ && ix86_binary_operator_ok (LSHIFTRT, HImode, operands)"
+ "shr{w}\t%0"
+ [(set_attr "type" "ishift")
+ (set_attr "length" "2")])
+
;; This pattern can't accept a variable shift count, since shifts by
;; zero don't affect the flags. We assume that shifts by constant
;; zero are optimized away.
[(set_attr "type" "ishift")
(set_attr "mode" "HI")])
+(define_insn "*lshrhi3_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (lshiftrt:HI (match_operand:HI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const_1_to_31_operand" "I"))
+ (const_int 0)))
+ (clobber (match_scratch:HI 0 "=r"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && ix86_binary_operator_ok (LSHIFTRT, HImode, operands)"
+ "shr{w}\t{%2, %0|%0, %2}"
+ [(set_attr "type" "ishift")
+ (set_attr "mode" "HI")])
+
(define_expand "lshrqi3"
[(set (match_operand:QI 0 "nonimmediate_operand" "")
(lshiftrt:QI (match_operand:QI 1 "nonimmediate_operand" "")
(const_string "2")
(const_string "*")))])
+(define_insn "*lshrqi2_one_bit_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (lshiftrt:QI (match_operand:QI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const1_operand" ""))
+ (const_int 0)))
+ (clobber (match_scratch:QI 0 "=q"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && (TARGET_SHIFT1 || optimize_size)
+ && ix86_binary_operator_ok (LSHIFTRT, QImode, operands)"
+ "shr{b}\t%0"
+ [(set_attr "type" "ishift")
+ (set_attr "length" "2")])
+
;; This pattern can't accept a variable shift count, since shifts by
;; zero don't affect the flags. We assume that shifts by constant
;; zero are optimized away.
"shr{b}\t{%2, %0|%0, %2}"
[(set_attr "type" "ishift")
(set_attr "mode" "QI")])
+
+(define_insn "*lshrqi2_cconly"
+ [(set (reg FLAGS_REG)
+ (compare
+ (lshiftrt:QI (match_operand:QI 1 "nonimmediate_operand" "0")
+ (match_operand:QI 2 "const_1_to_31_operand" "I"))
+ (const_int 0)))
+ (clobber (match_scratch:QI 0 "=q"))]
+ "ix86_match_ccmode (insn, CCGOCmode)
+ && ix86_binary_operator_ok (LSHIFTRT, QImode, operands)"
+ "shr{b}\t{%2, %0|%0, %2}"
+ [(set_attr "type" "ishift")
+ (set_attr "mode" "QI")])
\f
;; Rotate instructions
(define_insn_and_split "*tls_dynamic_gnu2_combine_32"
[(set (match_operand:SI 0 "register_operand" "=&a")
(plus:SI
- (plus:SI (match_operand:SI 3 "tp_or_register_operand" "ir")
- (unspec:SI [(match_operand:SI 4 "tls_modbase_operand" "")
- (match_operand:SI 5 "" "")
- (match_operand:SI 2 "register_operand" "b")
- (reg:SI SP_REG)]
- UNSPEC_TLSDESC))
+ (unspec:SI [(match_operand:SI 3 "tls_modbase_operand" "")
+ (match_operand:SI 4 "" "")
+ (match_operand:SI 2 "register_operand" "b")
+ (reg:SI SP_REG)]
+ UNSPEC_TLSDESC)
(const:SI (unspec:SI
[(match_operand:SI 1 "tls_symbolic_operand" "")]
UNSPEC_DTPOFF))))
"!TARGET_64BIT && TARGET_GNU2_TLS"
"#"
""
- [(parallel
- [(set (match_dup 0)
- (plus:SI (match_dup 3)
- (match_dup 5)))
- (clobber (reg:CC FLAGS_REG))])]
+ [(set (match_dup 0) (match_dup 5))]
{
operands[5] = no_new_pseudos ? operands[0] : gen_reg_rtx (Pmode);
emit_insn (gen_tls_dynamic_gnu2_32 (operands[5], operands[1], operands[2]));
(define_insn_and_split "*tls_dynamic_gnu2_combine_64"
[(set (match_operand:DI 0 "register_operand" "=&a")
(plus:DI
- (plus:DI (match_operand:DI 2 "tp_or_register_operand" "ir")
- (unspec:DI [(match_operand:DI 3 "tls_modbase_operand" "")
- (match_operand:DI 4 "" "")
- (reg:DI SP_REG)]
- UNSPEC_TLSDESC))
+ (unspec:DI [(match_operand:DI 2 "tls_modbase_operand" "")
+ (match_operand:DI 3 "" "")
+ (reg:DI SP_REG)]
+ UNSPEC_TLSDESC)
(const:DI (unspec:DI
[(match_operand:DI 1 "tls_symbolic_operand" "")]
UNSPEC_DTPOFF))))
"TARGET_64BIT && TARGET_GNU2_TLS"
"#"
""
- [(parallel
- [(set (match_dup 0)
- (plus:DI (match_dup 2)
- (match_dup 4)))
- (clobber (reg:CC FLAGS_REG))])]
+ [(set (match_dup 0) (match_dup 4))]
{
operands[4] = no_new_pseudos ? operands[0] : gen_reg_rtx (Pmode);
emit_insn (gen_tls_dynamic_gnu2_64 (operands[4], operands[1]));
"* return output_387_binary_op (insn, operands);"
[(set (attr "type")
(if_then_else (eq_attr "alternative" "1")
- (if_then_else (match_operand:SF 3 "mult_operator" "")
+ (if_then_else (match_operand:DF 3 "mult_operator" "")
(const_string "ssemul")
(const_string "sseadd"))
- (if_then_else (match_operand:SF 3 "mult_operator" "")
+ (if_then_else (match_operand:DF 3 "mult_operator" "")
(const_string "fmul")
(const_string "fop"))))
(set_attr "mode" "DF")])
&& (GET_CODE (operands[1]) != MEM || GET_CODE (operands[2]) != MEM)"
"* return output_387_binary_op (insn, operands);"
[(set (attr "type")
- (if_then_else (match_operand:SF 3 "mult_operator" "")
+ (if_then_else (match_operand:DF 3 "mult_operator" "")
(const_string "ssemul")
(const_string "sseadd")))
(set_attr "mode" "DF")])
&& (GET_CODE (operands[1]) != MEM || GET_CODE (operands[2]) != MEM)"
"* return output_387_binary_op (insn, operands);"
[(set (attr "type")
- (if_then_else (match_operand:SF 3 "mult_operator" "")
+ (if_then_else (match_operand:DF 3 "mult_operator" "")
(const_string "fmul")
(const_string "fop")))
(set_attr "mode" "DF")])
"* return output_387_binary_op (insn, operands);"
[(set (attr "type")
(cond [(and (eq_attr "alternative" "2")
- (match_operand:SF 3 "mult_operator" ""))
+ (match_operand:DF 3 "mult_operator" ""))
(const_string "ssemul")
(and (eq_attr "alternative" "2")
- (match_operand:SF 3 "div_operator" ""))
+ (match_operand:DF 3 "div_operator" ""))
(const_string "ssediv")
(eq_attr "alternative" "2")
(const_string "sseadd")
"* return output_387_binary_op (insn, operands);"
[(set_attr "mode" "DF")
(set (attr "type")
- (cond [(match_operand:SF 3 "mult_operator" "")
+ (cond [(match_operand:DF 3 "mult_operator" "")
(const_string "ssemul")
- (match_operand:SF 3 "div_operator" "")
+ (match_operand:DF 3 "div_operator" "")
(const_string "ssediv")
]
(const_string "sseadd")))])
[(set_attr "type" "sseadd")
(set_attr "mode" "DF")])
+;; Make two stack loads independent:
+;; fld aa fld aa
+;; fld %st(0) -> fld bb
+;; fmul bb fmul %st(1), %st
+;;
+;; Actually we only match the last two instructions for simplicity.
+(define_peephole2
+ [(set (match_operand 0 "fp_register_operand" "")
+ (match_operand 1 "fp_register_operand" ""))
+ (set (match_dup 0)
+ (match_operator 2 "binary_fp_operator"
+ [(match_dup 0)
+ (match_operand 3 "memory_operand" "")]))]
+ "REGNO (operands[0]) != REGNO (operands[1])"
+ [(set (match_dup 0) (match_dup 3))
+ (set (match_dup 0) (match_dup 4))]
+
+ ;; The % modifier is not operational anymore in peephole2's, so we have to
+ ;; swap the operands manually in the case of addition and multiplication.
+ "if (COMMUTATIVE_ARITH_P (operands[2]))
+ operands[4] = gen_rtx_fmt_ee (GET_CODE (operands[2]), GET_MODE (operands[2]),
+ operands[0], operands[1]);
+ else
+ operands[4] = gen_rtx_fmt_ee (GET_CODE (operands[2]), GET_MODE (operands[2]),
+ operands[1], operands[0]);")
+
;; Conditional addition patterns
(define_expand "addqicc"
[(match_operand:QI 0 "register_operand" "")
(set (match_scratch:DI 2 "=&r") (const_int 0))
(clobber (reg:CC FLAGS_REG))]
"TARGET_64BIT"
- "mov{q}\t{%%fs:%P1, %2|%2, QWORD PTR %%fs:%P1}\;mov{q}\t{%2, %0|%0, %2}\;xor{l}\t%k2, %k2"
+ {
+ /* The kernel uses a different segment register for performance reasons; a
+ system call would not have to trash the userspace segment register,
+ which would be expensive */
+ if (ix86_cmodel != CM_KERNEL)
+ return "mov{q}\t{%%fs:%P1, %2|%2, QWORD PTR %%fs:%P1}\;mov{q}\t{%2, %0|%0, %2}\;xor{l}\t%k2, %k2";
+ else
+ return "mov{q}\t{%%gs:%P1, %2|%2, QWORD PTR %%gs:%P1}\;mov{q}\t{%2, %0|%0, %2}\;xor{l}\t%k2, %k2";
+ }
[(set_attr "type" "multi")])
(define_expand "stack_protect_test"
UNSPEC_SP_TLS_TEST))
(clobber (match_scratch:DI 3 "=r"))]
"TARGET_64BIT"
- "mov{q}\t{%1, %3|%3, %1}\;xor{q}\t{%%fs:%P2, %3|%3, QWORD PTR %%fs:%P2}"
+ {
+ /* The kernel uses a different segment register for performance reasons; a
+ system call would not have to trash the userspace segment register,
+ which would be expensive */
+ if (ix86_cmodel != CM_KERNEL)
+ return "mov{q}\t{%1, %3|%3, %1}\;xor{q}\t{%%fs:%P2, %3|%3, QWORD PTR %%fs:%P2}";
+ else
+ return "mov{q}\t{%1, %3|%3, %1}\;xor{q}\t{%%gs:%P2, %3|%3, QWORD PTR %%gs:%P2}";
+ }
[(set_attr "type" "multi")])
(include "sse.md")
OSDN Git Service
