default_use_cxa_atexit=no
target_gtfiles=
need_64bit_hwint=
+need_64bit_isa=
+# Selects the object file format reader/writer used by LTO.
+lto_binary_reader=lto-elf
# Don't carry these over build->host->target. Please.
xm_file=
# Obsolete configurations.
case ${target} in
- alpha*-dec-osf4* \
- | alpha*-dec-osf5.0* \
- | mips-sgi-irix5* \
+ mips-sgi-irix5* \
| mips-sgi-irix6.[0-4]* \
| *-*-solaris2.7* \
)
| *-*-linux*oldld* \
| *-*-rtemsaout* \
| *-*-rtemscoff* \
- | *-*-solaris2.[0-6] \
- | *-*-solaris2.[0-6].* \
+ | *-*-solaris2.[0-7] \
+ | *-*-solaris2.[0-7].* \
| *-*-sysv* \
| vax-*-vms* \
)
target_cpu_default="MASK_GAS"
tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
;;
-alpha*-dec-osf[45]*)
+alpha*-dec-osf5.1*)
if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
extra_passes="mips-tfile mips-tdump"
fi
use_collect2=yes
- tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
- tm_file="${tm_file} alpha/osf.h"
+ tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf5"
+ tm_file="${tm_file} alpha/osf5.h"
+ tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
extra_headers=va_list.h
use_gcc_stdint=provide
- case ${target} in
- *-*-osf4*)
- # Define TARGET_SUPPORT_ARCH except on 4.0a.
- case ${target} in
- *-*-osf4.0a) ;;
- *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
- esac
- ;;
- *-*-osf5*)
- tm_file="${tm_file} alpha/osf5.h"
- tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
- ;;
- esac
case ${enable_threads} in
"" | yes | posix)
thread_file='posix'
;;
i[34567]86-*-darwin*)
need_64bit_hwint=yes
+ need_64bit_isa=yes
# This is so that '.../configure && make' doesn't fail due to
# config.guess deciding that the configuration is i386-*-darwin* and
# support.
with_cpu=${with_cpu:-generic}
tmake_file="${tmake_file} i386/t-crtpc i386/t-crtfm"
+ lto_binary_reader=lto-macho
;;
x86_64-*-darwin*)
with_cpu=${with_cpu:-generic}
tmake_file="${tmake_file} t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
tm_file="${tm_file} ${cpu_type}/darwin64.h"
+ lto_binary_reader=lto-macho
;;
i[34567]86-*-elf*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
tm_defines="${tm_defines} TARGET_BI_ARCH=1"
tmake_file="${tmake_file} i386/t-linux64"
need_64bit_hwint=yes
+ need_64bit_isa=yes
case X"${with_cpu}" in
- Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
+ Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
;;
X)
if test x$with_cpu_64 = x; then
;;
*)
echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
- echo "generic atom core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
+ echo "generic atom core2 nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
exit 1
;;
esac
;;
i[34567]86-*-solaris2*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
+ # Set default arch_32 to pentium4, tune_32 to generic like the other
+ # i386 targets, although config.guess defaults to i386-pc-solaris2*.
+ with_arch_32=${with_arch_32:-pentium4}
+ with_tune_32=${with_tune_32:-generic}
case ${target} in
*-*-solaris2.1[0-9]*)
tm_file="${tm_file} sol2-10.h"
;;
esac
tm_file="${tm_file} i386/sol2.h"
+ if test x$gnu_ld = xyes; then
+ tm_file="${tm_file} sol2-gld.h"
+ fi
if test x$gas = xyes; then
tm_file="${tm_file} i386/sol2-gas.h"
fi
# depends on a runtime test and is thus performed in
# libgcc/configure.ac instead.
need_64bit_hwint=yes
+ need_64bit_isa=yes
use_gcc_stdint=wrap
case X"${with_cpu}" in
- Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
+ Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
;;
X)
if test x$with_cpu_64 = x; then
;;
*)
echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
- echo "generic atom core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
+ echo "generic atom core2 nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
exit 1
;;
esac
thread_file='posix'
fi
use_gcc_stdint=wrap
+ lto_binary_reader=lto-coff
;;
i[34567]86-*-mingw* | x86_64-*-mingw*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
case ${target} in
x86_64-*-* | *-w64-*)
need_64bit_hwint=yes
+ need_64bit_isa=yes
;;
*)
;;
if test x$enable_targets = xall; then
tm_defines="${tm_defines} TARGET_BI_ARCH=1"
case X"${with_cpu}" in
- Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
+ Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
;;
X)
if test x$with_cpu_64 = x; then
;;
*)
echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
- echo "generic atom core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
+ echo "generic atom core2 nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
exit 1
;;
esac
fi
tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming"
case ${target} in
- *-w64-*)
+ x86_64-w64-*)
tmake_file="${tmake_file} i386/t-mingw-w64"
;;
+ i[34567]86-w64-*)
+ tmake_file="${tmake_file} i386/t-mingw-w32"
+ ;;
*)
tmake_file="${tmake_file} i386/t-mingw32"
;;
cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
default_use_cxa_atexit=yes
use_gcc_stdint=wrap
+ lto_binary_reader=lto-coff
case ${enable_threads} in
"" | yes | win32) thread_file='win32'
tmake_file="${tmake_file} i386/t-gthr-win32"
;;
lm32-*-elf*)
tm_file="dbxelf.h elfos.h ${tm_file}"
- tmake_file="${tmake_file} lm32/t-fprules-softfp soft-fp/t-softfp"
+ tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
;;
+lm32-*-rtems*)
+ tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h"
+ tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
+ tmake_file="${tmake_file} t-rtems"
+ ;;
lm32-*-uclinux*)
tm_file="dbxelf.h elfos.h ${tm_file} linux.h lm32/uclinux-elf.h"
- tmake_file="${tmake_file} lm32/t-fprules-softfp soft-fp/t-softfp"
+ tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
;;
m32r-*-elf*)
tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
fi
use_gcc_stdint=wrap
;;
-mips-sgi-irix[56]*)
- tm_file="elfos.h ${tm_file} mips/iris.h"
- tmake_file="mips/t-iris mips/t-slibgcc-irix"
+mips-sgi-irix6.5*)
+ tm_file="elfos.h ${tm_file} mips/iris6.h"
+ tmake_file="mips/t-iris mips/t-iris6 mips/t-slibgcc-irix"
target_cpu_default="MASK_ABICALLS"
- case ${target} in
- *-*-irix5*)
- tm_file="${tm_file} mips/iris5.h"
- use_gcc_stdint=provide
- ;;
-
- *-*-irix6*)
- tm_file="${tm_file} mips/iris6.h"
- tmake_file="${tmake_file} mips/t-iris6"
- tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
- case ${target} in
- *-*-irix6.[0-4]*)
- use_gcc_stdint=provide
- ;;
- *-*-irix6.5*)
- # Only IRIX Development Foundation 1.3 for IRIX 6.5
- # provides stdint.h.
- use_gcc_stdint=wrap
- ;;
- esac
- ;;
- esac
+ tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
+ # Only IRIX Development Foundation 1.3 for IRIX 6.5 provides stdint.h.
+ use_gcc_stdint=wrap
if test "x$stabs" = xyes
then
- tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
+ tm_file="${tm_file} dbx.h"
fi
if test "x$gnu_ld" = xyes
then
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
tmake_file="mips/t-elf mips/t-libgcc-mips16"
;;
+mips64-*-toppers* | mips64el-*-toppers*)
+ tm_file="elfos.h ${tm_file} mips/elf.h mips/toppers.h"
+ tmake_file="mips/t-elf mips/t-libgcc-mips16"
+ tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
+ ;;
mips64-*-elf* | mips64el-*-elf*)
tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
tmake_file="mips/t-elf mips/t-libgcc-mips16"
*-darwin[0-6]*)
;;
esac
+ lto_binary_reader=lto-macho
extra_headers=altivec.h
;;
powerpc64-*-darwin*)
tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
extra_options="${extra_options} ${cpu_type}/darwin.opt"
# We're omitting t-darwin8 to avoid building any multilibs
+ lto_binary_reader=lto-macho
extra_headers=altivec.h
;;
powerpc*-*-freebsd*)
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
;;
sparc-*-linux*) # SPARC's running GNU/Linux, libc6
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/gas.h linux.h glibc-stdint.h"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h"
extra_options="${extra_options} sparc/long-double-switch.opt"
tmake_file="${tmake_file} sparc/t-linux"
if test x$enable_targets = xall; then
tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
;;
-sparc64-*-solaris2* | sparcv9-*-solaris2*)
+sparc*-*-solaris2*)
tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
case ${target} in
- *-*-solaris2.1[0-9]*)
+ *-*-solaris2.1[0-9]*)
tm_file="${tm_file} sol2-10.h"
use_gcc_stdint=wrap
;;
- *)
+ *)
use_gcc_stdint=provide
;;
esac
- tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
- if test x$gnu_ld = xyes; then
- tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
- fi
- if test x$gas = xyes; then
- tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
- fi
- tm_file="${tm_file} tm-dwarf2.h"
- tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
- if test x$gnu_ld = xyes; then
- tmake_file="$tmake_file t-slibgcc-elf-ver"
- else
- tmake_file="$tmake_file t-slibgcc-sld"
- fi
- c_target_objs="sol2-c.o"
- cxx_target_objs="sol2-c.o"
- extra_objs="sol2.o"
- tm_p_file="${tm_p_file} sol2-protos.h"
- extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
- case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
- "":yes:* | yes:yes:* ) thread_file=posix ;;
- "":*:yes | yes:*:yes ) thread_file=solaris ;;
- esac
- ;;
-sparc-*-solaris2*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
+ tm_file="${tm_file} sparc/sol2.h"
case ${target} in
- *-*-solaris2.1[0-9]*)
- tm_file="${tm_file} sol2-10.h"
- use_gcc_stdint=wrap
+ sparc64-*-* | sparcv9-*-*)
+ tm_file="${tm_file} sparc/sol2-64.h"
;;
- *)
- use_gcc_stdint=provide
+ *)
+ test x$with_cpu != x || with_cpu=v9
;;
esac
- tm_file="${tm_file} sparc/sol2.h"
- if test x$gnu_ld = xyes; then
- tm_file="${tm_file} sparc/sol2-gld.h"
- fi
+ tm_file="${tm_file} sparc/sol2-bi.h"
if test x$gas = xyes; then
- tm_file="${tm_file} sparc/sol2-gas.h"
+ tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
+ fi
+ if test x$gnu_ld = xyes; then
+ tm_file="${tm_file} sol2-gld.h sparc/sol2-gld-bi.h"
fi
- tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
+ tm_file="${tm_file} tm-dwarf2.h"
+ tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
if test x$gnu_ld = xyes; then
tmake_file="$tmake_file t-slibgcc-elf-ver"
else
tmake_file="$tmake_file t-slibgcc-sld"
fi
- tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
- if test x$gnu_ld = xyes; then
- tm_file="${tm_file} sparc/sol2-gld-bi.h"
- fi
if test x$gas = xyes; then
- tm_file="${tm_file} sparc/sol2-gas-bi.h"
+ tm_file="usegas.h ${tm_file}"
fi
- tm_file="${tm_file} tm-dwarf2.h"
- tmake_file="$tmake_file sparc/t-sol2-64"
- test x$with_cpu != x || with_cpu=v9
c_target_objs="sol2-c.o"
cxx_target_objs="sol2-c.o"
extra_objs="sol2.o"
esac
;;
sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
- tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/gas.h linux.h glibc-stdint.h sparc/linux64.h"
+ tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h sparc/linux64.h"
extra_options="${extra_options} sparc/long-double-switch.opt"
tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
;;
# to generic if there is no processor scheduler model for the target.
arch=
cpu=
+arch_without_sse2=no
+arch_without_64bit=no
case ${target} in
i386-*-*)
arch=i386
cpu=i386
+ arch_without_sse2=yes
+ arch_without_64bit=yes
;;
i486-*-*)
arch=i486
cpu=i486
+ arch_without_sse2=yes
+ arch_without_64bit=yes
;;
i586-*-*)
+ arch_without_sse2=yes
+ arch_without_64bit=yes
case ${target_noncanonical} in
k6_2-*)
arch=k6-2
;;
i686-*-* | i786-*-*)
case ${target_noncanonical} in
+ bdver1-*)
+ arch=bdver1
+ cpu=bdver1
+ ;;
amdfam10-*|barcelona-*)
arch=amdfam10
cpu=amdfam10
athlon_xp-*|athlon_mp-*|athlon_4-*)
arch=athlon-4
cpu=athlon-4
+ arch_without_sse2=yes
+ arch_without_64bit=yes
;;
athlon_tbird-*|athlon-*)
arch=athlon
cpu=athlon
+ arch_without_sse2=yes
;;
geode-*)
arch=geode
cpu=geode
+ arch_without_sse2=yes
;;
pentium2-*)
arch=pentium2
cpu=pentium2
+ arch_without_sse2=yes
;;
pentium3-*|pentium3m-*)
arch=pentium3
cpu=pentium3
+ arch_without_sse2=yes
;;
pentium4-*|pentium4m-*)
arch=pentium4
pentiumpro-*)
arch=pentiumpro
cpu=pentiumpro
+ arch_without_sse2=yes
;;
*)
arch=pentiumpro
cpu=generic
+ arch_without_sse2=yes
+ arch_without_64bit=yes
;;
esac
;;
x86_64-*-*)
case ${target_noncanonical} in
+ bdver1-*)
+ arch=bdver1
+ cpu=bdver1
+ ;;
amdfam10-*|barcelona-*)
arch=amdfam10
cpu=amdfam10
# This block sets nothing except for with_arch.
if test x$with_arch = x ; then
case ${target} in
- i[34567]86-*-*|x86_64-*-*)
+ i[34567]86-*-darwin*|x86_64-*-darwin*)
+ # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
+ # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
+ ;;
+ i[34567]86-*-*)
+ # --with-fpmath sets the default ISA to SSE2, which is the same
+ # ISA supported by Pentium 4.
+ if test x$with_fpmath = x || test $arch_without_sse2 = no; then
+ with_arch=$arch
+ else
+ with_arch=pentium4
+ fi
+ ;;
+ x86_64-*-*)
with_arch=$arch
;;
esac
# Avoid overriding --with-arch-32 and --with-arch-64 values.
case ${target} in
+ i[34567]86-*-darwin*|x86_64-*-darwin*)
+ # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
+ # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
+ ;;
i[34567]86-*-*|x86_64-*-*)
if test x$with_arch_32 != x || test x$with_arch_64 != x; then
if test x$with_arch_32 = x; then
- with_arch_32=$arch
+ with_arch_32=$with_arch
fi
if test x$with_arch_64 = x; then
- with_arch_64=$arch
+ if test $arch_without_64bit = yes; then
+ # Set the default 64bit arch to x86-64 if the default arch
+ # doesn't support 64bit.
+ with_arch_64=x86-64
+ else
+ with_arch_64=$with_arch
+ fi
fi
with_arch=
+ elif test $arch_without_64bit$need_64bit_isa = yesyes; then
+ # Set the default 64bit arch to x86-64 if the default arch
+ # doesn't support 64bit and we need 64bit ISA.
+ with_arch_32=$with_arch
+ with_arch_64=x86-64
+ with_arch=
fi
;;
esac
fi
+# Support --with-fpmath.
+if test x$with_fpmath != x; then
+ case ${target} in
+ i[34567]86-*-* | x86_64-*-*)
+ case ${with_fpmath} in
+ sse)
+ tm_file="${tm_file} i386/ssemath.h"
+ ;;
+ *)
+ echo "Invalid --with-fpmath=$with_fpmath" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+ *)
+ echo "--with-fpmath isn't supported for $target." 1>&2
+ exit 1
+ ;;
+ esac
+fi
+
# Similarly for --with-schedule.
if test x$with_schedule = x; then
case ${target} in
case "$with_fpu" in
"" \
- | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | vfpv3 | vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd | vfpv3xd-fp16 | neon | neon-fp16 | vfpv4 | vfpv4-d16 | fpv4-sp-d16 | neon-vfpv4)
+ | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | vfpv3 \
+ | vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd \
+ | vfpv3xd-fp16 | neon | neon-fp16 | vfpv4 | vfpv4-d16 \
+ | fpv4-sp-d16 | neon-vfpv4)
# OK
;;
*)
esac
# OK
;;
- "" | amdfam10 | barcelona | k8-sse3 | opteron-sse3 | athlon64-sse3 | k8 | opteron | athlon64 | athlon-fx | nocona | core2 | atom | x86-64 | generic | native)
+ "" | x86-64 | generic | native \
+ | k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
+ | opteron-sse3 | athlon-fx | bdver1 | amdfam10 \
+ | barcelona | nocona | core2 | atom)
# OK
;;
*)
i[34567]86-*-darwin* | x86_64-*-darwin*)
tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
;;
- i[34567]86-*-linux* | x86_64-*-linux* | i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu)
+ i[34567]86-*-linux* | x86_64-*-linux* | \
+ i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu | \
+ i[34567]86-*-gnu*)
tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp i386/t-linux"
;;
+ i[34567]86-*-solaris2*)
+ tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
+ ;;
i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
;;