# GCC target-specific configuration file.
-# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
# Free Software Foundation, Inc.
#This file is part of GCC.
# tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
# Note that the preferred order is:
# - specific target header "${cpu_type}/${cpu_type.h}"
-# - generic headers like dbxelf.h elfos.h, netware.h, etc.
+# - generic headers like dbxelf.h elfos.h, etc.
# - specializing target headers like ${cpu_type.h}/elf.h
# This helps to keep OS specific stuff out of the CPU
# defining header ${cpu_type}/${cpu_type.h}.
# the compiler proper (cc1, cc1obj, cc1plus)
# depending on target.
#
+# extra_gcc_objs List of extra objects that should be linked into
+# the compiler driver (gcc) depending on target.
+#
# extra_headers List of used header files from the directory
# config/${cpu_type}.
#
# system normally uses GNU as.
#
# need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
-# for this target. This is true iff
-# MAX_LONG_TYPE_SIZE is 64. (The code which
-# determines the underlying integral type for
-# HOST_WIDE_INT cannot see the definition of
-# MAX_LONG_TYPE_SIZE.)
+# for this target. This is true iff this target
+# supports "long" or "wchar_t" wider than 32 bits.
#
# configure_default_options
# Set to an initializer for configure_default_options
# Obsolete configurations.
case ${target} in
- dummy)
+ dummy*)
if test "x$enable_obsolete" != xyes; then
echo "*** Configuration ${target} is obsolete." >&2
echo "*** Specify --enable-obsolete to build it anyway." >&2
hppa*-*-* | parisc*-*-*)
cpu_type=pa
;;
+m32r*-*-*)
+ cpu_type=m32r
+ ;;
m680[012]0-*-*)
cpu_type=m68k
extra_headers=math-68881.h
*-*-darwin*)
tm_file="${tm_file} darwin.h"
tm_p_file="${tm_p_file} darwin-protos.h"
- tmake_file="t-darwin"
+ tmake_file="t-darwin t-slibgcc-darwin"
target_gtfiles="\$(srcdir)/config/darwin.c"
c_target_objs="darwin-c.o"
cxx_target_objs="darwin-c.o"
esac
fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
;;
+*-*-kfreebsd*-gnu)
+ # Must come before *-*-gnu*
+ xm_defines=POSIX # needed for cross-compiling from FreeBSD?
+ extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
+ # GNU tools are the only tools.
+ gas=yes
+ gnu_ld=yes
+ case ${enable_threads} in
+ "" | yes | posix) thread_file='posix' ;;
+ esac
+ ;;
*-*-linux*libc1* | *-*-linux*aout*)
# Avoid the generic linux case.
;;
-*-*-linux*)
+*-*-linux* | frv-*-*linux*)
# Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
gas=yes
case ${enable_threads} in
"" | yes | posix) thread_file='posix' ;;
esac
+ tmake_file="t-slibgcc-elf-ver t-linux"
;;
*-*-gnu*)
# On the Hurd, the setup is just about the same on
*-*-vxworks*)
tmake_file=t-vxworks
tm_file="${tm_file} elfos.h svr4.h vxworks.h"
- thread_file='vxworks'
+ case ${enable_threads} in
+ no) ;;
+ "" | yes | vxworks) thread_file='vxworks' ;;
+ *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
+ esac
use_collect2=yes
+ xm_defines=POSIX
;;
esac
alpha*-*-linux*)
tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
target_cpu_default="MASK_GAS"
- tmake_file="t-slibgcc-elf-ver t-linux alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
+ tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
;;
alpha*-*-gnu*)
target_cpu_default="MASK_GAS"
tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
tmake_file=arm/t-semi
;;
+arm-wrs-vxworks)
+ tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
+ tmake_file="${tmake_file} arm/t-vxworks"
+ ;;
arm*-*-freebsd*|strongarm*-*-freebsd*)
tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
tmake_file="${tmake_file} arm/t-strongarm-elf"
use_collect2=yes
;;
arm*-*-linux*) # ARM GNU/Linux with ELF
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h"
- tmake_file="t-slibgcc-elf-ver t-linux arm/t-linux"
+ tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h"
+ tmake_file="${tmake_file} arm/t-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
gnu_ld=yes
;;
;;
cris-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
+ # We need to avoid using t-linux, so override default tmake_file
tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
;;
-d30v-*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
- ;;
-dsp16xx-*)
- use_fixproto=yes
- ;;
fr30-*-elf)
tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
tmake_file=fr30/t-fr30
tmake_file=frv/t-frv
use_fixproto=yes
;;
+frv-*-*linux*)
+ tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
+ linux.h frv/linux.h frv/frv-abi.h"
+ tmake_file="${tmake_file} frv/t-frv frv/t-linux"
+ ;;
h8300-*-rtems*)
tmake_file="h8300/t-h8300 t-rtems"
tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
use_fixproto=yes
;;
hppa*64*-*-linux* | parisc*64*-*-linux*)
- target_cpu_default="(MASK_PA_11 | MASK_PA_20)"
+ target_cpu_default="(MASK_PA_11 | MASK_PA_20 | MASK_BIG_SWITCH)"
tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux pa/t-linux64"
+ tmake_file="${tmake_file} pa/t-linux64"
gas=yes gnu_ld=yes
need_64bit_hwint=yes
;;
hppa*-*-linux* | parisc*-*-linux*)
- target_cpu_default="MASK_PA_11 | MASK_NO_SPACE_REGS"
+ target_cpu_default="(MASK_PA_11 | MASK_NO_SPACE_REGS | MASK_BIG_SWITCH)"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
pa/pa32-regs.h pa/pa32-linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux pa/t-linux"
+ tmake_file="${tmake_file} pa/t-linux"
+ # if not configured with --enable-sjlj-exceptions, bump the
+ # libgcc version number
+ if test x$sjlj != x1; then
+ tmake_file="$tmake_file pa/t-slibgcc-elf-ver"
+ fi
;;
# port not yet contributed.
#hppa*-*-openbsd*)
-# target_cpu_default="MASK_PA_11"
+# target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
# ;;
hppa1.1-*-pro*)
- target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
+ target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT | MASK_BIG_SWITCH)"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h"
tmake_file="pa/t-pro"
;;
hppa1.1-*-osf*)
- target_cpu_default="MASK_PA_11"
+ target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
tmake_file="pa/t-pa"
use_collect2=yes
;;
hppa1.1-*-rtems*)
- target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
+ target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT | MASK_BIG_SWITCH)"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h pa/rtems.h rtems.h"
tmake_file="pa/t-pro t-rtems"
;;
hppa1.1-*-bsd*)
+ target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
- target_cpu_default="MASK_PA_11"
tmake_file="pa/t-pa"
use_collect2=yes
;;
hppa1.1-*-hpux10* | hppa2*-*-hpux10*)
- target_cpu_default="MASK_PA_11"
+ target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
if test x$enable_threads = x; then
use_fixproto=yes
;;
hppa*64*-*-hpux11*)
+ if test x$gnu_ld = xyes
+ then
+ target_cpu_default="(MASK_PA_11 | MASK_PA_20 | MASK_GAS | MASK_GNU_LD | MASK_BIG_SWITCH)"
+ else
+ target_cpu_default="(MASK_PA_11 | MASK_PA_20 | MASK_GAS | MASK_BIG_SWITCH)"
+ fi
if test x$gas = xyes
then
tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
fi
need_64bit_hwint=yes
tmake_file="pa/t-pa64 pa/t-pa-hpux"
- target_cpu_default="(MASK_PA_11|MASK_PA_20|MASK_GAS)"
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
- if test x$gnu_ld = xyes
- then
- target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
- fi
case x${enable_threads} in
xyes | xposix )
thread_file=posix
esac
;;
hppa1.1-*-hpux11* | hppa2*-*-hpux11*)
- target_cpu_default="MASK_PA_11"
+ target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
case x${enable_threads} in
esac
use_collect2=yes
;;
-i370-*-opened*) # IBM 360/370/390 Architecture
- xm_defines='FATAL_EXIT_CODE=12'
- tm_file="i370/oe.h i370/i370.h"
- tmake_file="i370/t-i370"
- c_target_objs="i370-c.o"
- cxx_target_objs="i370-c.o"
- # Don't bother fixing up header files; they're weird.
- ;;
-i370-*-mvs*)
- xm_defines='FATAL_EXIT_CODE=12'
- tm_file="i370/mvs.h i370/i370.h"
- tmake_file="i370/t-i370"
- c_target_objs="i370-c.o"
- cxx_target_objs="i370-c.o"
- use_fixproto=yes
- ;;
-i370-*-linux*)
- tm_file="dbxelf.h elfos.h svr4.h linux.h i370/linux.h i370/i370.h"
- tmake_file="t-slibgcc-elf-ver t-linux"
- # broken_install=yes
- ;;
i[34567]86-*-darwin*)
tm_file="${tm_file} i386/darwin.h"
- use_fixproto=yes
;;
i[34567]86-*-elf*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
tmake_file="i386/t-i386elf t-svr4"
use_fixproto=yes
;;
-i[34567]86-ncr-sysv4*) # NCR 3000 - ix86 running system V.4
- xm_defines="SMALL_ARG_MAX"
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtpic
- use_fixproto=yes
- ;;
-i[34567]86-*-netware) # Intel 80386's running netware
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h netware.h i386/netware.h"
- ;;
i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
if test x$gas = xyes
then
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
extra_parts='crtbegin.o crtend.o'
;;
-i[34567]86-*-freebsd2 | i[34567]86-*-freebsd2.* | i[34567]86-*-freebsd*aout*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/freebsd-aout.h"
- tmake_file=t-freebsd
- ;;
i[34567]86-*-freebsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
;;
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
use_fixproto=yes
;;
-i[34567]86-*-linux*aout*) # Intel 80386's running GNU/Linux
- # with a.out format
- tmake_file="i386/t-crtstuff"
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h linux-aout.h i386/linux-aout.h"
- gnu_ld=yes
- ;;
-i[34567]86-*-linux*libc1) # Intel 80386's running GNU/Linux
- # with ELF format using the
- # GNU/Linux C library 5
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 i386/t-crtstuff"
- extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- gnu_ld=yes
- if test x$enable_threads = xyes; then
- thread_file='single'
- fi
- ;;
i[34567]86-*-linux*) # Intel 80386's running GNU/Linux
# with ELF format using glibc 2
# aka GNU/Linux C library 6
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux i386/t-crtstuff"
+ tmake_file="${tmake_file} i386/t-crtstuff"
;;
x86_64-*-linux*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
i386/x86-64.h i386/linux64.h"
- tmake_file="t-slibgcc-elf-ver t-linux i386/t-linux64"
+ tmake_file="${tmake_file} i386/t-linux64"
+ ;;
+i[34567]86-*-kfreebsd*-gnu) # must be before i[34567]86-*-gnu*
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h kfreebsdgnu.h i386/kfreebsdgnu.h"
+ tmake_file="t-slibgcc-elf-ver t-kfreebsd-gnu i386/t-crtstuff"
+ float_format=i386
+ use_fixproto=no
;;
i[34567]86-*-gnu*)
;;
gnu_ld=yes
gas=yes
;;
-i[34567]86-moss-msdos* | i[34567]86-*-moss*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h i386/moss.h"
- tmake_file=t-libc-ok
- gnu_ld=yes
- gas=yes
- use_fixproto=yes
- ;;
i[34567]86-*-lynxos*)
if test x$gas = xyes
then
fi
use_fixproto=yes
;;
-i[34567]86-*-mach*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/mach.h"
-# tmake_file=t-libc-ok
- use_collect2=yes
- use_fixproto=yes
- ;;
i[34567]86-*-nto-qnx*)
tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
tmake_file=i386/t-nto
extra_parts="crtbegin.o crtend.o"
use_fixproto=yes
;;
-i[34567]86-*-udk*) # Intel x86 on SCO UW/OSR5 Dev Kit
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h i386/udk.h"
- tmake_file="i386/t-crtpic i386/t-udk t-svr4"
- extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
- ;;
-i[34567]86-*-sysv*) # Intel 80386's running system V
- if test x$gas = xyes
- then
- if test x$stabs = xyes
- then
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h i386/svr3dbx.h"
- tmake_file=i386/t-svr3dbx
- extra_parts="svr3.ifile svr3z.ifile"
- else
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/svr3gas.h"
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtstuff
- fi
- else
- tm_file="${tm_file} svr3.h i386/unix.h i386/att.h i386/sysv3.h"
- extra_parts="crtbegin.o crtend.o"
- tmake_file=i386/t-crtstuff
- fi
- tmake_file="$tmake_file i386/t-crtpic"
- use_fixproto=yes
- ;;
-i386-*-vsta) # Intel 80386's running VSTa kernel
- xm_file="i386/xm-vsta.h"
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/vsta.h"
- use_fixproto=yes
+i[4567]86-wrs-vxworks)
+ tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/vxworks.h"
+ tmake_file="${tmake_file} i386/t-vxworks"
;;
i[34567]86-*-pe | i[34567]86-*-cygwin*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
xm_file=i386/xm-cygwin.h
- tmake_file="i386/t-cygming i386/t-cygwin"
+ tmake_file="i386/t-cygwin i386/t-cygming"
extra_objs=winnt.o
c_target_objs=cygwin2.o
cxx_target_objs=cygwin2.o
+ extra_gcc_objs=cygwin1.o
if test x$enable_threads = xyes; then
thread_file='posix'
fi
tm_file="${tm_file} dbxcoff.h"
fi
;;
-i[34567]86-*-interix*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h interix.h"
- tmake_file="i386/t-interix"
- extra_objs=winnt.o
- if test x$enable_threads = xyes ; then
- thread_file='posix'
- fi
- if test x$stabs = xyes ; then
- tm_file="${tm_file} dbxcoff.h"
- fi
- ;;
i[34567]86-*-kaos*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
tmake_file="i386/t-i386elf t-svr4"
extra_parts="crtbegin.o crtend.o"
use_fixproto=yes
;;
-i960-*-coff*)
- tm_file="${tm_file} dbxcoff.h i960/i960-coff.h libgloss.h"
- tmake_file=i960/t-960bare
- c_target_objs="i960-c.o"
- cxx_target_objs="i960-c.o"
- ;;
-i960-*-rtems)
- tmake_file="i960/t-960bare t-rtems"
- tm_file="${tm_file} dbxcoff.h i960/i960-coff.h i960/rtems.h rtems.h"
- c_target_objs="i960-c.o"
- cxx_target_objs="i960-c.o"
- ;;
-i960-*-*) # Default i960 environment.
- use_collect2=yes
- tmake_file=i960/t-960bare
- c_target_objs="i960-c.o"
- cxx_target_objs="i960-c.o"
- use_fixproto=yes
- ;;
ia64*-*-elf*)
tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
tmake_file="ia64/t-ia64"
;;
ia64*-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux ia64/t-ia64 ia64/t-glibc"
+ tmake_file="${tmake_file} ia64/t-ia64 ia64/t-glibc"
target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
if test x"$use_libunwind_exceptions" = xyes; then
extra_parts="crtinit.o crtfini.o"
use_fixproto=yes
;;
+m32rle-*-elf*)
+ tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
+ extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
+ use_fixproto=yes
+ ;;
+m32r-*-linux*)
+ tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+ # We override the tmake_file for linux -- why?
+ tmake_file="m32r/t-linux"
+ gnu_ld=yes
+ use_fixproto=yes
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ ;;
+m32rle-*-linux*)
+ tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
+ extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
+ # We override the tmake_file for linux -- why?
+ tmake_file="m32r/t-linux"
+ gnu_ld=yes
+ use_fixproto=yes
+ if test x$enable_threads = xyes; then
+ thread_file='posix'
+ fi
+ ;;
# m68hc11 and m68hc12 share the same machine description.
m68hc11-*-*|m6811-*-*)
tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
tmake_file="m68hc11/t-m68hc11-gas"
use_fixproto=yes
;;
-m68000-hp-hpux*) # HP 9000 series 300
- tm_file="m68k/hp320base.h m68k/m68k.h m68k/hp320.h m68k/hp310.h"
- tm_defines="TARGET_DEFAULT=0" # 68000, no 68881, no bitfield ops
- if test x$gas = xyes
- then
- tm_defines="${tm_defines} DBX_DEBUGGING_INFO=1 USE_GAS"
- fi
- tmake_file=m68k/t-hp320
- use_collect2=yes
- use_fixproto=yes
- ;;
-m68k-hp-hpux7*) # HP 9000 series 300 running HPUX version 7.
- tm_file="m68k/hp320base.h m68k/m68k.h m68k/hp320.h"
- if test x$gas = xyes
- then
- tm_defines="DBX_DEBUGGING_INFO=1 USE_GAS"
- else
- tm_defines="NO_DOT_IN_LABEL NO_BUGS"
- fi
- use_collect2=yes
- use_fixproto=yes
- ;;
-m68k-hp-hpux*) # HP 9000 series 300
- tm_file="m68k/hp320base.h m68k/m68k.h m68k/hp320.h"
- if test x$gas = xyes
- then
- tm_defines="DBX_DEBUGGING_INFO=1 USE_GAS"
- fi
- use_collect2=yes
- use_fixproto=yes
- ;;
m68k-*-aout*)
tmake_file=m68k/t-m68kbare
tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
;;
m68020-*-elf* | m68k-*-elf*)
tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
+ tm_defines="MOTOROLA USE_GAS"
tmake_file=m68k/t-m68kelf
extra_parts="crtbegin.o crtend.o"
use_fixproto=yes
;;
m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
+ tm_defines="MOTOROLA USE_GAS"
case ${target} in
m68010*)
target_cpu_default="0"
;;
esac
;;
-m68k*-*-netbsd*)
- tm_file="m68k/m68k.h netbsd.h netbsd-aout.h m68k/netbsd.h"
- tmake_file=t-netbsd
- extra_parts=""
- use_collect2=yes
- ;;
m68k*-*-openbsd*)
# needed to unconfuse gdb
tm_defines="OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)"
# we need collect2 until our bug is fixed...
use_collect2=yes
;;
-m68k-*-sysv4*) # Motorola m68k's running system V.4
- tm_file="m68k/m68k.h m68k/sgs.h dbxelf.h elfos.h svr4.h m68k/m68kv4.h"
- tm_defines="MOTOROLA SGS SGS_CMP_ORDER SGS_SWITCH_TABLES"
- tmake_file=t-svr4
- extra_parts="crtbegin.o crtend.o"
- use_fixproto=yes
- ;;
m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux with uClibc
tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
tm_defines="MOTOROLA USE_GAS"
# aka the GNU/Linux C library 6.
tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
tm_defines="MOTOROLA USE_GAS"
- tmake_file="t-slibgcc-elf-ver t-linux"
+ # if not configured with --enable-sjlj-exceptions, bump the
+ # libgcc version number
+ if test x$sjlj != x1; then
+ tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
+ fi
;;
m68k-*-rtems*)
tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
+ tm_defines="MOTOROLA USE_GAS"
extra_parts="crtbegin.o crtend.o"
;;
mcore-*-elf)
tmake_file=mcore/t-mcore-pe
use_fixproto=yes
;;
-mips-sgi-irix6*o32) # SGI System V.4., IRIX 6, O32 ABI
- tm_file="${tm_file} mips/iris5.h"
+mips-sgi-irix6*) # SGI System V.4., IRIX 6
+ tm_file="${tm_file} mips/iris5.h mips/iris6.h"
+ tmake_file="mips/t-iris mips/t-iris5-6 mips/t-iris6"
if test x$gas = xyes
then
- tm_file="${tm_file} mips/sdb.h mips/iris5gas.h mips/iris6-o32-gas.h"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
- fi
- tmake_file=mips/t-iris5-gas
- else
- tm_file="${tm_file} mips/iris6-o32-as.h"
- tmake_file=mips/t-iris5-as
+ tm_file="${tm_file} mips/iris6gas.h"
fi
- tm_file="${tm_file} mips/iris6-o32.h"
- tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6"
- target_cpu_default="MASK_ABICALLS"
- # mips-tfile doesn't work yet
- # See comment in mips/iris5.h file.
- use_collect2=yes
-# if test x$enable_threads = xyes; then
-# thread_file='irix'
-# fi
- use_fixproto=yes
- ;;
-mips-sgi-irix6*) # SGI System V.4., IRIX 6
- tm_file="${tm_file} mips/iris5.h mips/iris6.h"
if test "x$gnu_ld" = xyes
then
tm_file="${tm_file} mips/iris6gld.h"
+ tmake_file="$tmake_file mips/t-irix-gld"
fi
- tmake_file="mips/t-iris mips/t-iris5-6 mips/t-iris6"
target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT"
tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
+ # See comment in mips/iris5.h file. Only enabled for O32 ABI
+ # without GNU as.
+ if test x$gas = xno
+ then
+ use_collect2=yes
+ fi
# if test x$enable_threads = xyes; then
# thread_file='irix'
# fi
else
tmake_file=mips/t-iris5-as
fi
+ if test "x$gnu_ld" = xyes
+ then
+ tm_file="${tm_file} mips/iris5gld.h"
+ tmake_file="$tmake_file mips/t-irix-gld"
+ fi
tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6"
target_cpu_default="MASK_ABICALLS"
# mips-tfile doesn't work yet
# See comment in mips/iris5.h file.
- use_collect2=yes
+ if test x$gas = xno
+ then
+ use_collect2=yes
+ fi
# if test x$enable_threads = xyes; then
# thread_file='irix'
# fi
;;
mips64*-*-linux*)
tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
- tmake_file="t-slibgcc-elf-ver t-linux mips/t-linux64"
+ tmake_file="${tmake_file} mips/t-linux64"
# This default ABI is a partial lie: t-linux64 overrides the
# DRIVER_SELF_SPEC that sets the default abi, in the spec file
tm_defines="MIPS_ISA_DEFAULT=32"
;;
esac
- tmake_file="t-slibgcc-elf-ver t-linux"
;;
mips*-*-openbsd*)
tm_defines="OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
mips64orion-*-elf* | mips64orionel-*-elf*)
tm_file="${tm_file} mips/elforion.h mips/elf64.h"
tmake_file=mips/t-elf
- tmake_file=mips/t-elf
target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
use_fixproto=yes
tm_file="${tm_file} mips/elf.h mips/rtems.h rtems.h"
tmake_file="mips/t-elf t-rtems mips/t-rtems"
;;
+mips-wrs-vxworks)
+ # We want vxworks.h after mips/elf.h, which unfortunately means we
+ # have to redo the tm_file list from scratch.
+ tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
+ tmake_file="${tmake_file} mips/t-vxworks"
+ target_cpu_default="MASK_GAS"
+ ;;
+mips-wrs-windiss) # Instruction-level simulator for VxWorks.
+ xm_defines=POSIX
+ tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
+ tmake_file="${tmake_file} mips/t-elf"
+ target_cpu_default="MASK_GAS"
+ thread_file=
+ ;;
mipstx39-*-elf* | mipstx39el-*-elf*)
tm_file="${tm_file} mips/r3900.h mips/elf.h"
tmake_file=mips/t-r3900
x|xpowerpc64|xdefault64) tm_file="${tm_file} rs6000/default64.h";;
esac
tm_file="${tm_file} rs6000/linux64.h"
- tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-linux rs6000/t-ppccomm rs6000/t-linux64"
+ tmake_file="rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64"
;;
powerpc64-*-gnu*)
tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
;;
powerpc-*-darwin*)
tm_file="${tm_file} rs6000/darwin.h"
- tmake_file="t-darwin rs6000/t-darwin"
+ tmake_file="${tmake_file} rs6000/t-darwin"
extra_headers=altivec.h
- # override ppc default
- need_64bit_hwint=
- use_fixproto=yes
;;
powerpc*-*-freebsd*)
tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
;;
powerpc-*-rtems*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
- tmake_file="rs6000/t-fprules t-rtems rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
;;
powerpc-*-linux*altivec*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
;;
powerpc-*-linux*spe*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
;;
powerpc-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
- tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
;;
powerpc-*-gnu-gnualtivec*)
tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
extra_headers=ppc-asm.h
;;
-powerpc-wrs-windiss*)
+powerpc-wrs-windiss*) # Instruction-level simulator for VxWorks.
tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
thread_file=""
;;
s390-*-linux*)
tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff"
+ tmake_file="${tmake_file} s390/t-crtstuff"
;;
s390x-*-linux*)
tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
md_file=s390/s390.md
extra_modes=s390/s390-modes.def
out_file=s390/s390.c
- tmake_file="t-slibgcc-elf-ver t-linux s390/t-crtstuff s390/t-linux64"
+ tmake_file="${tmake_file} s390/t-crtstuff s390/t-linux64"
+ ;;
+s390x-ibm-tpf*)
+ tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
+ tm_p_file=s390/s390-protos.h
+ md_file=s390/s390.md
+ extra_modes=s390/s390-modes.def
+ extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
+ out_file=s390/s390.c
+ tmake_file="t-slibgcc-elf-ver s390/t-crtstuff s390/t-tpf"
;;
sh-*-elf* | sh[2346l]*-*-elf* | sh*-*-kaos*)
tmake_file="sh/t-sh sh/t-elf"
case ${target} in
- shl* | sh64l*)
+ shl* | sh[234]l* | sh64l*)
tm_file="sh/little.h ${tm_file}"
tmake_file="${tmake_file} sh/t-le"
;;
esac
use_fixproto=yes
;;
-sh-*-rtemself*)
- tmake_file="sh/t-sh sh/t-elf t-rtems"
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
- ;;
-sh-*-rtems*)
+sh-*-rtemscoff*)
tmake_file="sh/t-sh t-rtems"
tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
;;
+sh-*-rtems*)
+ tmake_file="sh/t-sh sh/t-elf t-rtems"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
+ ;;
sh-*-linux* | sh[2346lbe]*-*-linux*)
- tmake_file="sh/t-sh sh/t-elf t-slibgcc-elf-ver t-linux"
+ tmake_file="sh/t-sh sh/t-elf ${tmake_file}"
case ${target} in
sh*be-*-* | sh*eb-*-*) ;;
*)
;;
esac
;;
+sh-wrs-vxworks)
+ tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
+ tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
+ ;;
sh-*-*)
tm_file="${tm_file} dbxcoff.h sh/coff.h"
use_fixproto=yes
use_collect2=yes
;;
sparc64-*-openbsd*)
- tm_file="sparc/openbsd1-64.h sparc/sparc.h elfos.h svr4.h sparc/sysv4.h sparc/sol2.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
+ tm_file="sparc/openbsd1-64.h sparc/sparc.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
gas=yes gnu_ld=yes
with_cpu=ultrasparc
;;
;;
sparc-*-linux*) # SPARC's running GNU/Linux, libc6
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux sparc/t-crtfm"
+ tmake_file="${tmake_file} sparc/t-crtfm"
;;
sparc-*-rtems*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/rtemself.h rtems.h"
need_64bit_hwint=yes
;;
sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
- tmake_file="t-slibgcc-elf-ver t-linux sparc/t-linux64 sparc/t-crtfm"
+ tmake_file="${tmake_file} sparc/t-linux64 sparc/t-crtfm"
tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
;;
sparc64-*-netbsd*)
tm_file="${tm_file} vax/ultrix.h"
use_fixproto=yes
;;
-vax-*-*) # VAX default entry
- use_fixproto=yes
- ;;
xscale-*-elf)
tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
tmake_file=arm/t-xscale-elf
;;
xtensa-*-linux*)
tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux xtensa/t-xtensa xtensa/t-linux"
+ tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
;;
am33_2.0-*-linux*)
tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
- tmake_file="t-slibgcc-elf-ver t-linux mn10300/t-linux"
+ tmake_file="${tmake_file} mn10300/t-linux"
gas=yes gnu_ld=yes
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
use_collect2=no
;;
i686-*-* | i786-*-*)
case ${target_noncanonical} in
- k8-*)
+ k8-*|opteron-*|athlon_64-*)
with_cpu=k8
;;
athlon_xp-*|athlon_mp-*|athlon_4-*)
pentium2-*)
with_cpu=pentium2
;;
- pentium3-*)
+ pentium3-*|pentium3m-*)
with_cpu=pentium3
;;
- pentium4-*)
+ pentium4-*|pentium4m-*)
with_cpu=pentium4
;;
+ prescott-*)
+ with_cpu=prescott
+ ;;
+ nocona-*)
+ with_cpu=nocona
+ ;;
+ pentium_m-*)
+ with_cpu=pentium-m
+ ;;
*)
with_cpu=pentiumpro
;;
alphaev5*-*-*)
with_cpu=ev5
;;
+ frv-*-*linux*)
+ with_cpu=fr400
+ ;;
sparc*-*-*)
with_cpu="`echo ${target} | sed 's/-.*$//'`"
if [ x$with_cpu = xsparc64 ]; then
;;
arm*-*-*)
- supported_defaults="arch cpu float tune"
+ supported_defaults="arch cpu float tune fpu"
for which in cpu tune; do
eval "val=\$with_$which"
case "$val" in
| arm7m | arm7dm | arm7dmi | arm[79]tdmi \
| arm70 | arm700i | arm710t | arm720 \
| arm720t | arm740t | arm710c | arm920 \
- | arm920t | arm940t | arm9e | arm10tdmi \
+ | arm920t | arm926ejs | arm940t | arm9e | arm10tdmi \
| arm7100 | arm7500 | arm7500fe | arm810 \
- | arm1020t \
+ | arm1026ejs | arm1020t | arm1136js | arm1136jfs \
| xscale | iwmmxt \
| ep9312 \
| strongarm | strongarm110 | strongarm11[01]0)
case "$with_arch" in
"" \
- | armv[2345] | armv2a | armv3m | armv4t | armv5t \
- | armv5te | ep9312)
+ | armv[23456] | armv2a | armv3m | armv4t | armv5t \
+ | armv5te | armv6j | ep9312)
# OK
;;
*)
case "$with_float" in
"" \
- | soft | hard)
+ | soft | hard | softfp)
# OK
;;
*)
;;
esac
+ case "$with_fpu" in
+ "" \
+ | fpa | fpe2 | fpe3 | maverick | vfp )
+ # OK
+ ;;
+ *)
+ echo "Unknown fpu used in --with-fpu=$fpu" 2>&1
+ exit 1
+ ;;
+ esac
+
if test "x$with_arch" != x && test "x$with_cpu" != x; then
echo "Warning: --with-arch overrides --with-cpu" 1>&2
fi
;;
+ fr*-*-*linux*)
+ supported_defaults=cpu
+ case "$with_cpu" in
+ fr400) ;;
+ *)
+ echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+
+ m68k*-linux*)
+ supported_defaults="cpu"
+ case "$with_cpu" in
+ "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60")
+ # OK
+ ;;
+ *)
+ echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
+ echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+
hppa*-*-* | parisc*-*-*)
supported_defaults="arch schedule"
| i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
| c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
| pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
- | athlon-4 | athlon-xp | athlon-mp | k8)
+ | athlon-4 | athlon-xp | athlon-mp | k8 | opteron \
+ | athlon64 | athlon-fx | prescott | pentium-m \
+ | pentium4m | pentium3m| nocona)
# OK
;;
*)
for which in cpu tune; do
eval "val=\$with_$which"
case ${val} in
- "" | default32 | default64 | common \
+ default32 | default64)
+ with_which="with_$which"
+ eval $with_which=
+ ;;
+ "" | common \
| power | power2 | power3 | power4 \
| powerpc | powerpc64 \
| rios | rios1 | rios2 | rsc | rsc1 | rs64a \
| 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
| 601 | 602 | 603 | 603e | ec603e | 604 \
| 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
- | 8540 | 801 | 821 | 823 | 860 | 970)
+ | 8540 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
# OK
;;
*)
esac
;;
+ m68k*-linux*)
+ case "x$with_cpu" in
+ x)
+ # The most generic
+ target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
+ ;;
+ xm68020)
+ target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
+ ;;
+ xm68030)
+ target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)"
+ ;;
+ xm68040)
+ target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
+ ;;
+ xm68060)
+ target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
+ ;;
+ xm68020-40)
+ target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)"
+ ;;
+ xm68020-60)
+ target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)"
+ ;;
+ *)
+ echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
+ exit 1
+ ;;
+ esac
+ ;;
+
hppa*-*-* | parisc*-*-*)
if test x$gas = xyes
then
esac
t=
- all_defaults="abi cpu arch tune schedule float mode"
+ all_defaults="abi cpu arch tune schedule float mode fpu"
for option in $all_defaults
do
eval "val=\$with_$option"
OSDN Git Service
