-- --
-- B o d y --
-- --
--- $Revision$
--- --
--- Copyright (C) 1992-2001, Free Software Foundation, Inc. --
+-- Copyright (C) 1992-2010, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
--- ware Foundation; either version 2, or (at your option) any later ver- --
+-- ware Foundation; either version 3, or (at your option) any later ver- --
-- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
-- for more details. You should have received a copy of the GNU General --
--- Public License distributed with GNAT; see file COPYING. If not, write --
--- to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, --
--- MA 02111-1307, USA. --
+-- Public License distributed with GNAT; see file COPYING3. If not, go to --
+-- http://www.gnu.org/licenses for a complete copy of the license. --
-- --
-- GNAT was originally developed by the GNAT team at New York University. --
--- It is now maintained by Ada Core Technologies Inc (http://www.gnat.com). --
+-- Extensive contributions were provided by Ada Core Technologies Inc. --
-- --
------------------------------------------------------------------------------
with Atree; use Atree;
with Checks; use Checks;
with Einfo; use Einfo;
+with Elists; use Elists;
with Errout; use Errout;
+with Exp_Disp; use Exp_Disp;
with Exp_Tss; use Exp_Tss;
with Exp_Util; use Exp_Util;
-with Hostparm; use Hostparm;
with Lib; use Lib;
+with Lib.Xref; use Lib.Xref;
+with Namet; use Namet;
with Nlists; use Nlists;
with Nmake; use Nmake;
with Opt; use Opt;
+with Restrict; use Restrict;
+with Rident; use Rident;
with Rtsfind; use Rtsfind;
with Sem; use Sem;
+with Sem_Aux; use Sem_Aux;
+with Sem_Ch3; use Sem_Ch3;
with Sem_Ch8; use Sem_Ch8;
with Sem_Eval; use Sem_Eval;
with Sem_Res; use Sem_Res;
with Sem_Type; use Sem_Type;
with Sem_Util; use Sem_Util;
+with Sem_Warn; use Sem_Warn;
+with Snames; use Snames;
with Stand; use Stand;
with Sinfo; use Sinfo;
-with Snames; use Snames;
-with Table;
+with Targparm; use Targparm;
with Ttypes; use Ttypes;
with Tbuild; use Tbuild;
with Urealp; use Urealp;
-with GNAT.Heap_Sort_A; use GNAT.Heap_Sort_A;
+with GNAT.Heap_Sort_G;
package body Sem_Ch13 is
procedure Alignment_Check_For_Esize_Change (Typ : Entity_Id);
-- This routine is called after setting the Esize of type entity Typ.
- -- The purpose is to deal with the situation where an aligment has been
+ -- The purpose is to deal with the situation where an alignment has been
-- inherited from a derived type that is no longer appropriate for the
-- new Esize value. In this case, we reset the Alignment to unknown.
- procedure Check_Component_Overlap (C1_Ent, C2_Ent : Entity_Id);
- -- Given two entities for record components or discriminants, checks
- -- if they hav overlapping component clauses and issues errors if so.
-
function Get_Alignment_Value (Expr : Node_Id) return Uint;
-- Given the expression for an alignment value, returns the corresponding
-- Uint value. If the value is inappropriate, then error messages are
-- Attributes that do not specify a representation characteristic are
-- operational attributes.
- procedure New_Stream_Function
+ procedure New_Stream_Subprogram
(N : Node_Id;
Ent : Entity_Id;
Subp : Entity_Id;
- Nam : Name_Id);
- -- Create a function renaming of a given stream attribute to the
- -- designated subprogram and then in the tagged case, provide this as
- -- a primitive operation, or in the non-tagged case make an appropriate
- -- TSS entry. Used for Input. This is more properly an expansion activity
- -- than just semantics, but the presence of user-defined stream functions
- -- for limited types is a legality check, which is why this takes place
- -- here rather than in exp_ch13, where it was previously.
-
- procedure New_Stream_Procedure
- (N : Node_Id;
- Ent : Entity_Id;
- Subp : Entity_Id;
- Nam : Name_Id;
- Out_P : Boolean := False);
- -- Create a procedure renaming of a given stream attribute to the
- -- designated subprogram and then in the tagged case, provide this as
- -- a primitive operation, or in the non-tagged case make an appropriate
- -- TSS entry. Used for Read, Output, Write.
-
- procedure Check_Constant_Address_Clause (Expr : Node_Id; U_Ent : Entity_Id);
- -- Expr is an expression for an address clause. This procedure checks
- -- that the expression is constant, in the limited sense that it is safe
- -- to evaluate it at the point the object U_Ent is declared, rather than
- -- at the point of the address clause. The condition for this to be true
- -- is that the expression has no variables, no constants declared after
- -- U_Ent, and no calls to non-pure functions. If this condition is not
- -- met, then an appropriate error message is posted.
-
- procedure Warn_Overlay
- (Expr : Node_Id;
- Typ : Entity_Id;
- Nam : Node_Id);
- -- Expr is the expression for an address clause for entity Nam whose type
- -- is Typ. If Typ has a default initialization, check whether the address
- -- clause might overlay two entities, and emit a warning on the side effect
- -- that the initialization will cause.
+ Nam : TSS_Name_Type);
+ -- Create a subprogram renaming of a given stream attribute to the
+ -- designated subprogram and then in the tagged case, provide this as a
+ -- primitive operation, or in the non-tagged case make an appropriate TSS
+ -- entry. This is more properly an expansion activity than just semantics,
+ -- but the presence of user-defined stream functions for limited types is a
+ -- legality check, which is why this takes place here rather than in
+ -- exp_ch13, where it was previously. Nam indicates the name of the TSS
+ -- function to be generated.
+ --
+ -- To avoid elaboration anomalies with freeze nodes, for untagged types
+ -- we generate both a subprogram declaration and a subprogram renaming
+ -- declaration, so that the attribute specification is handled as a
+ -- renaming_as_body. For tagged types, the specification is one of the
+ -- primitive specs.
+
+ procedure Set_Biased
+ (E : Entity_Id;
+ N : Node_Id;
+ Msg : String;
+ Biased : Boolean := True);
+ -- If Biased is True, sets Has_Biased_Representation flag for E, and
+ -- outputs a warning message at node N if Warn_On_Biased_Representation is
+ -- is True. This warning inserts the string Msg to describe the construct
+ -- causing biasing.
----------------------------------------------
-- Table for Validate_Unchecked_Conversions --
-- call to Validate_Unchecked_Conversions does the actual error
-- checking and posting of warnings. The reason for this delayed
-- processing is to take advantage of back-annotations of size and
- -- alignment values peformed by the back end.
+ -- alignment values performed by the back end.
+
+ -- Note: the reason we store a Source_Ptr value instead of a Node_Id
+ -- is that by the time Validate_Unchecked_Conversions is called, Sprint
+ -- will already have modified all Sloc values if the -gnatD option is set.
type UC_Entry is record
- Enode : Node_Id; -- node used for posting warnings
- Source : Entity_Id; -- source type for unchecked conversion
- Target : Entity_Id; -- target type for unchecked conversion
+ Eloc : Source_Ptr; -- node used for posting warnings
+ Source : Entity_Id; -- source type for unchecked conversion
+ Target : Entity_Id; -- target type for unchecked conversion
end record;
package Unchecked_Conversions is new Table.Table (
Table_Increment => 200,
Table_Name => "Unchecked_Conversions");
+ ----------------------------------------
+ -- Table for Validate_Address_Clauses --
+ ----------------------------------------
+
+ -- If an address clause has the form
+
+ -- for X'Address use Expr
+
+ -- where Expr is of the form Y'Address or recursively is a reference
+ -- to a constant of either of these forms, and X and Y are entities of
+ -- objects, then if Y has a smaller alignment than X, that merits a
+ -- warning about possible bad alignment. The following table collects
+ -- address clauses of this kind. We put these in a table so that they
+ -- can be checked after the back end has completed annotation of the
+ -- alignments of objects, since we can catch more cases that way.
+
+ type Address_Clause_Check_Record is record
+ N : Node_Id;
+ -- The address clause
+
+ X : Entity_Id;
+ -- The entity of the object overlaying Y
+
+ Y : Entity_Id;
+ -- The entity of the object being overlaid
+
+ Off : Boolean;
+ -- Whether the address is offseted within Y
+ end record;
+
+ package Address_Clause_Checks is new Table.Table (
+ Table_Component_Type => Address_Clause_Check_Record,
+ Table_Index_Type => Int,
+ Table_Low_Bound => 1,
+ Table_Initial => 20,
+ Table_Increment => 200,
+ Table_Name => "Address_Clause_Checks");
+
+ -----------------------------------------
+ -- Adjust_Record_For_Reverse_Bit_Order --
+ -----------------------------------------
+
+ procedure Adjust_Record_For_Reverse_Bit_Order (R : Entity_Id) is
+ Comp : Node_Id;
+ CC : Node_Id;
+
+ begin
+ -- Processing depends on version of Ada
+
+ -- For Ada 95, we just renumber bits within a storage unit. We do the
+ -- same for Ada 83 mode, since we recognize pragma Bit_Order in Ada 83,
+ -- and are free to add this extension.
+
+ if Ada_Version < Ada_2005 then
+ Comp := First_Component_Or_Discriminant (R);
+ while Present (Comp) loop
+ CC := Component_Clause (Comp);
+
+ -- If component clause is present, then deal with the non-default
+ -- bit order case for Ada 95 mode.
+
+ -- We only do this processing for the base type, and in fact that
+ -- is important, since otherwise if there are record subtypes, we
+ -- could reverse the bits once for each subtype, which is wrong.
+
+ if Present (CC)
+ and then Ekind (R) = E_Record_Type
+ then
+ declare
+ CFB : constant Uint := Component_Bit_Offset (Comp);
+ CSZ : constant Uint := Esize (Comp);
+ CLC : constant Node_Id := Component_Clause (Comp);
+ Pos : constant Node_Id := Position (CLC);
+ FB : constant Node_Id := First_Bit (CLC);
+
+ Storage_Unit_Offset : constant Uint :=
+ CFB / System_Storage_Unit;
+
+ Start_Bit : constant Uint :=
+ CFB mod System_Storage_Unit;
+
+ begin
+ -- Cases where field goes over storage unit boundary
+
+ if Start_Bit + CSZ > System_Storage_Unit then
+
+ -- Allow multi-byte field but generate warning
+
+ if Start_Bit mod System_Storage_Unit = 0
+ and then CSZ mod System_Storage_Unit = 0
+ then
+ Error_Msg_N
+ ("multi-byte field specified with non-standard"
+ & " Bit_Order?", CLC);
+
+ if Bytes_Big_Endian then
+ Error_Msg_N
+ ("bytes are not reversed "
+ & "(component is big-endian)?", CLC);
+ else
+ Error_Msg_N
+ ("bytes are not reversed "
+ & "(component is little-endian)?", CLC);
+ end if;
+
+ -- Do not allow non-contiguous field
+
+ else
+ Error_Msg_N
+ ("attempt to specify non-contiguous field "
+ & "not permitted", CLC);
+ Error_Msg_N
+ ("\caused by non-standard Bit_Order "
+ & "specified", CLC);
+ Error_Msg_N
+ ("\consider possibility of using "
+ & "Ada 2005 mode here", CLC);
+ end if;
+
+ -- Case where field fits in one storage unit
+
+ else
+ -- Give warning if suspicious component clause
+
+ if Intval (FB) >= System_Storage_Unit
+ and then Warn_On_Reverse_Bit_Order
+ then
+ Error_Msg_N
+ ("?Bit_Order clause does not affect " &
+ "byte ordering", Pos);
+ Error_Msg_Uint_1 :=
+ Intval (Pos) + Intval (FB) /
+ System_Storage_Unit;
+ Error_Msg_N
+ ("?position normalized to ^ before bit " &
+ "order interpreted", Pos);
+ end if;
+
+ -- Here is where we fix up the Component_Bit_Offset value
+ -- to account for the reverse bit order. Some examples of
+ -- what needs to be done are:
+
+ -- First_Bit .. Last_Bit Component_Bit_Offset
+ -- old new old new
+
+ -- 0 .. 0 7 .. 7 0 7
+ -- 0 .. 1 6 .. 7 0 6
+ -- 0 .. 2 5 .. 7 0 5
+ -- 0 .. 7 0 .. 7 0 4
+
+ -- 1 .. 1 6 .. 6 1 6
+ -- 1 .. 4 3 .. 6 1 3
+ -- 4 .. 7 0 .. 3 4 0
+
+ -- The rule is that the first bit is is obtained by
+ -- subtracting the old ending bit from storage_unit - 1.
+
+ Set_Component_Bit_Offset
+ (Comp,
+ (Storage_Unit_Offset * System_Storage_Unit) +
+ (System_Storage_Unit - 1) -
+ (Start_Bit + CSZ - 1));
+
+ Set_Normalized_First_Bit
+ (Comp,
+ Component_Bit_Offset (Comp) mod
+ System_Storage_Unit);
+ end if;
+ end;
+ end if;
+
+ Next_Component_Or_Discriminant (Comp);
+ end loop;
+
+ -- For Ada 2005, we do machine scalar processing, as fully described In
+ -- AI-133. This involves gathering all components which start at the
+ -- same byte offset and processing them together. Same approach is still
+ -- valid in later versions including Ada 2012.
+
+ else
+ declare
+ Max_Machine_Scalar_Size : constant Uint :=
+ UI_From_Int
+ (Standard_Long_Long_Integer_Size);
+ -- We use this as the maximum machine scalar size
+
+ Num_CC : Natural;
+ SSU : constant Uint := UI_From_Int (System_Storage_Unit);
+
+ begin
+ -- This first loop through components does two things. First it
+ -- deals with the case of components with component clauses whose
+ -- length is greater than the maximum machine scalar size (either
+ -- accepting them or rejecting as needed). Second, it counts the
+ -- number of components with component clauses whose length does
+ -- not exceed this maximum for later processing.
+
+ Num_CC := 0;
+ Comp := First_Component_Or_Discriminant (R);
+ while Present (Comp) loop
+ CC := Component_Clause (Comp);
+
+ if Present (CC) then
+ declare
+ Fbit : constant Uint :=
+ Static_Integer (First_Bit (CC));
+
+ begin
+ -- Case of component with size > max machine scalar
+
+ if Esize (Comp) > Max_Machine_Scalar_Size then
+
+ -- Must begin on byte boundary
+
+ if Fbit mod SSU /= 0 then
+ Error_Msg_N
+ ("illegal first bit value for "
+ & "reverse bit order",
+ First_Bit (CC));
+ Error_Msg_Uint_1 := SSU;
+ Error_Msg_Uint_2 := Max_Machine_Scalar_Size;
+
+ Error_Msg_N
+ ("\must be a multiple of ^ "
+ & "if size greater than ^",
+ First_Bit (CC));
+
+ -- Must end on byte boundary
+
+ elsif Esize (Comp) mod SSU /= 0 then
+ Error_Msg_N
+ ("illegal last bit value for "
+ & "reverse bit order",
+ Last_Bit (CC));
+ Error_Msg_Uint_1 := SSU;
+ Error_Msg_Uint_2 := Max_Machine_Scalar_Size;
+
+ Error_Msg_N
+ ("\must be a multiple of ^ if size "
+ & "greater than ^",
+ Last_Bit (CC));
+
+ -- OK, give warning if enabled
+
+ elsif Warn_On_Reverse_Bit_Order then
+ Error_Msg_N
+ ("multi-byte field specified with "
+ & " non-standard Bit_Order?", CC);
+
+ if Bytes_Big_Endian then
+ Error_Msg_N
+ ("\bytes are not reversed "
+ & "(component is big-endian)?", CC);
+ else
+ Error_Msg_N
+ ("\bytes are not reversed "
+ & "(component is little-endian)?", CC);
+ end if;
+ end if;
+
+ -- Case where size is not greater than max machine
+ -- scalar. For now, we just count these.
+
+ else
+ Num_CC := Num_CC + 1;
+ end if;
+ end;
+ end if;
+
+ Next_Component_Or_Discriminant (Comp);
+ end loop;
+
+ -- We need to sort the component clauses on the basis of the
+ -- Position values in the clause, so we can group clauses with
+ -- the same Position. together to determine the relevant machine
+ -- scalar size.
+
+ Sort_CC : declare
+ Comps : array (0 .. Num_CC) of Entity_Id;
+ -- Array to collect component and discriminant entities. The
+ -- data starts at index 1, the 0'th entry is for the sort
+ -- routine.
+
+ function CP_Lt (Op1, Op2 : Natural) return Boolean;
+ -- Compare routine for Sort
+
+ procedure CP_Move (From : Natural; To : Natural);
+ -- Move routine for Sort
+
+ package Sorting is new GNAT.Heap_Sort_G (CP_Move, CP_Lt);
+
+ Start : Natural;
+ Stop : Natural;
+ -- Start and stop positions in the component list of the set of
+ -- components with the same starting position (that constitute
+ -- components in a single machine scalar).
+
+ MaxL : Uint;
+ -- Maximum last bit value of any component in this set
+
+ MSS : Uint;
+ -- Corresponding machine scalar size
+
+ -----------
+ -- CP_Lt --
+ -----------
+
+ function CP_Lt (Op1, Op2 : Natural) return Boolean is
+ begin
+ return Position (Component_Clause (Comps (Op1))) <
+ Position (Component_Clause (Comps (Op2)));
+ end CP_Lt;
+
+ -------------
+ -- CP_Move --
+ -------------
+
+ procedure CP_Move (From : Natural; To : Natural) is
+ begin
+ Comps (To) := Comps (From);
+ end CP_Move;
+
+ -- Start of processing for Sort_CC
+
+ begin
+ -- Collect the component clauses
+
+ Num_CC := 0;
+ Comp := First_Component_Or_Discriminant (R);
+ while Present (Comp) loop
+ if Present (Component_Clause (Comp))
+ and then Esize (Comp) <= Max_Machine_Scalar_Size
+ then
+ Num_CC := Num_CC + 1;
+ Comps (Num_CC) := Comp;
+ end if;
+
+ Next_Component_Or_Discriminant (Comp);
+ end loop;
+
+ -- Sort by ascending position number
+
+ Sorting.Sort (Num_CC);
+
+ -- We now have all the components whose size does not exceed
+ -- the max machine scalar value, sorted by starting position.
+ -- In this loop we gather groups of clauses starting at the
+ -- same position, to process them in accordance with AI-133.
+
+ Stop := 0;
+ while Stop < Num_CC loop
+ Start := Stop + 1;
+ Stop := Start;
+ MaxL :=
+ Static_Integer
+ (Last_Bit (Component_Clause (Comps (Start))));
+ while Stop < Num_CC loop
+ if Static_Integer
+ (Position (Component_Clause (Comps (Stop + 1)))) =
+ Static_Integer
+ (Position (Component_Clause (Comps (Stop))))
+ then
+ Stop := Stop + 1;
+ MaxL :=
+ UI_Max
+ (MaxL,
+ Static_Integer
+ (Last_Bit
+ (Component_Clause (Comps (Stop)))));
+ else
+ exit;
+ end if;
+ end loop;
+
+ -- Now we have a group of component clauses from Start to
+ -- Stop whose positions are identical, and MaxL is the
+ -- maximum last bit value of any of these components.
+
+ -- We need to determine the corresponding machine scalar
+ -- size. This loop assumes that machine scalar sizes are
+ -- even, and that each possible machine scalar has twice
+ -- as many bits as the next smaller one.
+
+ MSS := Max_Machine_Scalar_Size;
+ while MSS mod 2 = 0
+ and then (MSS / 2) >= SSU
+ and then (MSS / 2) > MaxL
+ loop
+ MSS := MSS / 2;
+ end loop;
+
+ -- Here is where we fix up the Component_Bit_Offset value
+ -- to account for the reverse bit order. Some examples of
+ -- what needs to be done for the case of a machine scalar
+ -- size of 8 are:
+
+ -- First_Bit .. Last_Bit Component_Bit_Offset
+ -- old new old new
+
+ -- 0 .. 0 7 .. 7 0 7
+ -- 0 .. 1 6 .. 7 0 6
+ -- 0 .. 2 5 .. 7 0 5
+ -- 0 .. 7 0 .. 7 0 4
+
+ -- 1 .. 1 6 .. 6 1 6
+ -- 1 .. 4 3 .. 6 1 3
+ -- 4 .. 7 0 .. 3 4 0
+
+ -- The rule is that the first bit is obtained by subtracting
+ -- the old ending bit from machine scalar size - 1.
+
+ for C in Start .. Stop loop
+ declare
+ Comp : constant Entity_Id := Comps (C);
+ CC : constant Node_Id :=
+ Component_Clause (Comp);
+ LB : constant Uint :=
+ Static_Integer (Last_Bit (CC));
+ NFB : constant Uint := MSS - Uint_1 - LB;
+ NLB : constant Uint := NFB + Esize (Comp) - 1;
+ Pos : constant Uint :=
+ Static_Integer (Position (CC));
+
+ begin
+ if Warn_On_Reverse_Bit_Order then
+ Error_Msg_Uint_1 := MSS;
+ Error_Msg_N
+ ("info: reverse bit order in machine " &
+ "scalar of length^?", First_Bit (CC));
+ Error_Msg_Uint_1 := NFB;
+ Error_Msg_Uint_2 := NLB;
+
+ if Bytes_Big_Endian then
+ Error_Msg_NE
+ ("?\info: big-endian range for "
+ & "component & is ^ .. ^",
+ First_Bit (CC), Comp);
+ else
+ Error_Msg_NE
+ ("?\info: little-endian range "
+ & "for component & is ^ .. ^",
+ First_Bit (CC), Comp);
+ end if;
+ end if;
+
+ Set_Component_Bit_Offset (Comp, Pos * SSU + NFB);
+ Set_Normalized_First_Bit (Comp, NFB mod SSU);
+ end;
+ end loop;
+ end loop;
+ end Sort_CC;
+ end;
+ end if;
+ end Adjust_Record_For_Reverse_Bit_Order;
+
--------------------------------------
-- Alignment_Check_For_Esize_Change --
--------------------------------------
-- definition clause that is the preferred approach in Ada 95.
procedure Analyze_At_Clause (N : Node_Id) is
+ CS : constant Boolean := Comes_From_Source (N);
+
begin
+ -- This is an obsolescent feature
+
+ Check_Restriction (No_Obsolescent_Features, N);
+
+ if Warn_On_Obsolescent_Feature then
+ Error_Msg_N
+ ("at clause is an obsolescent feature (RM J.7(2))?", N);
+ Error_Msg_N
+ ("\use address attribute definition clause instead?", N);
+ end if;
+
+ -- Rewrite as address clause
+
Rewrite (N,
Make_Attribute_Definition_Clause (Sloc (N),
Name => Identifier (N),
Chars => Name_Address,
Expression => Expression (N)));
+
+ -- We preserve Comes_From_Source, since logically the clause still
+ -- comes from the source program even though it is changed in form.
+
+ Set_Comes_From_Source (N, CS);
+
+ -- Analyze rewritten clause
+
Analyze_Attribute_Definition_Clause (N);
end Analyze_At_Clause;
-- disallow Storage_Size for derived task types, but that is also
-- clearly unintentional.
+ procedure Analyze_Stream_TSS_Definition (TSS_Nam : TSS_Name_Type);
+ -- Common processing for 'Read, 'Write, 'Input and 'Output attribute
+ -- definition clauses.
+
+ -----------------------------------
+ -- Analyze_Stream_TSS_Definition --
+ -----------------------------------
+
+ procedure Analyze_Stream_TSS_Definition (TSS_Nam : TSS_Name_Type) is
+ Subp : Entity_Id := Empty;
+ I : Interp_Index;
+ It : Interp;
+ Pnam : Entity_Id;
+
+ Is_Read : constant Boolean := (TSS_Nam = TSS_Stream_Read);
+
+ function Has_Good_Profile (Subp : Entity_Id) return Boolean;
+ -- Return true if the entity is a subprogram with an appropriate
+ -- profile for the attribute being defined.
+
+ ----------------------
+ -- Has_Good_Profile --
+ ----------------------
+
+ function Has_Good_Profile (Subp : Entity_Id) return Boolean is
+ F : Entity_Id;
+ Is_Function : constant Boolean := (TSS_Nam = TSS_Stream_Input);
+ Expected_Ekind : constant array (Boolean) of Entity_Kind :=
+ (False => E_Procedure, True => E_Function);
+ Typ : Entity_Id;
+
+ begin
+ if Ekind (Subp) /= Expected_Ekind (Is_Function) then
+ return False;
+ end if;
+
+ F := First_Formal (Subp);
+
+ if No (F)
+ or else Ekind (Etype (F)) /= E_Anonymous_Access_Type
+ or else Designated_Type (Etype (F)) /=
+ Class_Wide_Type (RTE (RE_Root_Stream_Type))
+ then
+ return False;
+ end if;
+
+ if not Is_Function then
+ Next_Formal (F);
+
+ declare
+ Expected_Mode : constant array (Boolean) of Entity_Kind :=
+ (False => E_In_Parameter,
+ True => E_Out_Parameter);
+ begin
+ if Parameter_Mode (F) /= Expected_Mode (Is_Read) then
+ return False;
+ end if;
+ end;
+
+ Typ := Etype (F);
+
+ else
+ Typ := Etype (Subp);
+ end if;
+
+ return Base_Type (Typ) = Base_Type (Ent)
+ and then No (Next_Formal (F));
+ end Has_Good_Profile;
+
+ -- Start of processing for Analyze_Stream_TSS_Definition
+
+ begin
+ FOnly := True;
+
+ if not Is_Type (U_Ent) then
+ Error_Msg_N ("local name must be a subtype", Nam);
+ return;
+ end if;
+
+ Pnam := TSS (Base_Type (U_Ent), TSS_Nam);
+
+ -- If Pnam is present, it can be either inherited from an ancestor
+ -- type (in which case it is legal to redefine it for this type), or
+ -- be a previous definition of the attribute for the same type (in
+ -- which case it is illegal).
+
+ -- In the first case, it will have been analyzed already, and we
+ -- can check that its profile does not match the expected profile
+ -- for a stream attribute of U_Ent. In the second case, either Pnam
+ -- has been analyzed (and has the expected profile), or it has not
+ -- been analyzed yet (case of a type that has not been frozen yet
+ -- and for which the stream attribute has been set using Set_TSS).
+
+ if Present (Pnam)
+ and then (No (First_Entity (Pnam)) or else Has_Good_Profile (Pnam))
+ then
+ Error_Msg_Sloc := Sloc (Pnam);
+ Error_Msg_Name_1 := Attr;
+ Error_Msg_N ("% attribute already defined #", Nam);
+ return;
+ end if;
+
+ Analyze (Expr);
+
+ if Is_Entity_Name (Expr) then
+ if not Is_Overloaded (Expr) then
+ if Has_Good_Profile (Entity (Expr)) then
+ Subp := Entity (Expr);
+ end if;
+
+ else
+ Get_First_Interp (Expr, I, It);
+ while Present (It.Nam) loop
+ if Has_Good_Profile (It.Nam) then
+ Subp := It.Nam;
+ exit;
+ end if;
+
+ Get_Next_Interp (I, It);
+ end loop;
+ end if;
+ end if;
+
+ if Present (Subp) then
+ if Is_Abstract_Subprogram (Subp) then
+ Error_Msg_N ("stream subprogram must not be abstract", Expr);
+ return;
+ end if;
+
+ Set_Entity (Expr, Subp);
+ Set_Etype (Expr, Etype (Subp));
+
+ New_Stream_Subprogram (N, U_Ent, Subp, TSS_Nam);
+
+ else
+ Error_Msg_Name_1 := Attr;
+ Error_Msg_N ("incorrect expression for% attribute", Expr);
+ end if;
+ end Analyze_Stream_TSS_Definition;
+
+ -- Start of processing for Analyze_Attribute_Definition_Clause
+
begin
+ -- Process Ignore_Rep_Clauses option
+
+ if Ignore_Rep_Clauses then
+ case Id is
+
+ -- The following should be ignored. They do not affect legality
+ -- and may be target dependent. The basic idea of -gnatI is to
+ -- ignore any rep clauses that may be target dependent but do not
+ -- affect legality (except possibly to be rejected because they
+ -- are incompatible with the compilation target).
+
+ when Attribute_Alignment |
+ Attribute_Bit_Order |
+ Attribute_Component_Size |
+ Attribute_Machine_Radix |
+ Attribute_Object_Size |
+ Attribute_Size |
+ Attribute_Small |
+ Attribute_Stream_Size |
+ Attribute_Value_Size =>
+
+ Rewrite (N, Make_Null_Statement (Sloc (N)));
+ return;
+
+ -- The following should not be ignored, because in the first place
+ -- they are reasonably portable, and should not cause problems in
+ -- compiling code from another target, and also they do affect
+ -- legality, e.g. failing to provide a stream attribute for a
+ -- type may make a program illegal.
+
+ when Attribute_External_Tag |
+ Attribute_Input |
+ Attribute_Output |
+ Attribute_Read |
+ Attribute_Storage_Pool |
+ Attribute_Storage_Size |
+ Attribute_Write =>
+ null;
+
+ -- Other cases are errors ("attribute& cannot be set with
+ -- definition clause"), which will be caught below.
+
+ when others =>
+ null;
+ end case;
+ end if;
+
Analyze (Nam);
Ent := Entity (Nam);
return;
end if;
- -- Rep clause applies to full view of incomplete type or private type
- -- if we have one (if not, this is a premature use of the type).
- -- However, certain semantic checks need to be done on the specified
- -- entity (i.e. the private view), so we save it in Ent.
+ -- Rep clause applies to full view of incomplete type or private type if
+ -- we have one (if not, this is a premature use of the type). However,
+ -- certain semantic checks need to be done on the specified entity (i.e.
+ -- the private view), so we save it in Ent.
if Is_Private_Type (Ent)
and then Is_Derived_Type (Ent)
and then not Is_Tagged_Type (Ent)
and then No (Full_View (Ent))
then
- -- If this is a private type whose completion is a derivation
- -- from another private type, there is no full view, and the
- -- attribute belongs to the type itself, not its underlying parent.
+ -- If this is a private type whose completion is a derivation from
+ -- another private type, there is no full view, and the attribute
+ -- belongs to the type itself, not its underlying parent.
U_Ent := Ent;
elsif Ekind (Ent) = E_Incomplete_Type then
+
+ -- The attribute applies to the full view, set the entity of the
+ -- attribute definition accordingly.
+
Ent := Underlying_Type (Ent);
U_Ent := Ent;
+ Set_Entity (Nam, Ent);
+
else
U_Ent := Underlying_Type (Ent);
end if;
Error_Msg_N ("entity must be declared in this scope", Nam);
return;
+ elsif No (U_Ent) then
+ U_Ent := Ent;
+
elsif Is_Type (U_Ent)
and then not Is_First_Subtype (U_Ent)
and then Id /= Attribute_Object_Size
then
Error_Msg_N ("cannot specify attribute for subtype", Nam);
return;
-
end if;
-- Switch on particular attribute
-- Address attribute definition clause
when Attribute_Address => Address : begin
- Analyze_And_Resolve (Expr, RTE (RE_Address));
+
+ -- A little error check, catch for X'Address use X'Address;
+
+ if Nkind (Nam) = N_Identifier
+ and then Nkind (Expr) = N_Attribute_Reference
+ and then Attribute_Name (Expr) = Name_Address
+ and then Nkind (Prefix (Expr)) = N_Identifier
+ and then Chars (Nam) = Chars (Prefix (Expr))
+ then
+ Error_Msg_NE
+ ("address for & is self-referencing", Prefix (Expr), Ent);
+ return;
+ end if;
+
+ -- Not that special case, carry on with analysis of expression
+
+ Analyze_And_Resolve (Expr, RTE (RE_Address));
+
+ -- Even when ignoring rep clauses we need to indicate that the
+ -- entity has an address clause and thus it is legal to declare
+ -- it imported.
+
+ if Ignore_Rep_Clauses then
+ if Ekind_In (U_Ent, E_Variable, E_Constant) then
+ Record_Rep_Item (U_Ent, N);
+ end if;
+
+ return;
+ end if;
if Present (Address_Clause (U_Ent)) then
Error_Msg_N ("address already given for &", Nam);
-- Case of address clause for subprogram
elsif Is_Subprogram (U_Ent) then
-
if Has_Homonym (U_Ent) then
Error_Msg_N
("address clause cannot be given " &
"for overloaded subprogram",
Nam);
+ return;
end if;
- -- For subprograms, all address clauses are permitted,
- -- and we mark the subprogram as having a deferred freeze
- -- so that Gigi will not elaborate it too soon.
+ -- For subprograms, all address clauses are permitted, and we
+ -- mark the subprogram as having a deferred freeze so that Gigi
+ -- will not elaborate it too soon.
-- Above needs more comments, what is too soon about???
-- Case of address clause for entry
elsif Ekind (U_Ent) = E_Entry then
-
if Nkind (Parent (N)) = N_Task_Body then
Error_Msg_N
("entry address must be specified in task spec", Nam);
+ return;
end if;
-- For entries, we require a constant address
Check_Constant_Address_Clause (Expr, U_Ent);
- -- Case of address clause for an object
+ -- Special checks for task types
+
+ if Is_Task_Type (Scope (U_Ent))
+ and then Comes_From_Source (Scope (U_Ent))
+ then
+ Error_Msg_N
+ ("?entry address declared for entry in task type", N);
+ Error_Msg_N
+ ("\?only one task can be declared of this type", N);
+ end if;
+
+ -- Entry address clauses are obsolescent
+
+ Check_Restriction (No_Obsolescent_Features, N);
+
+ if Warn_On_Obsolescent_Feature then
+ Error_Msg_N
+ ("attaching interrupt to task entry is an " &
+ "obsolescent feature (RM J.7.1)?", N);
+ Error_Msg_N
+ ("\use interrupt procedure instead?", N);
+ end if;
+
+ -- Case of an address clause for a controlled object which we
+ -- consider to be erroneous.
+
+ elsif Is_Controlled (Etype (U_Ent))
+ or else Has_Controlled_Component (Etype (U_Ent))
+ then
+ Error_Msg_NE
+ ("?controlled object& must not be overlaid", Nam, U_Ent);
+ Error_Msg_N
+ ("\?Program_Error will be raised at run time", Nam);
+ Insert_Action (Declaration_Node (U_Ent),
+ Make_Raise_Program_Error (Loc,
+ Reason => PE_Overlaid_Controlled_Object));
+ return;
+
+ -- Case of address clause for a (non-controlled) object
elsif
Ekind (U_Ent) = E_Variable
Ekind (U_Ent) = E_Constant
then
declare
- Decl : constant Node_Id := Declaration_Node (U_Ent);
- Expr : constant Node_Id := Expression (N);
- Typ : constant Entity_Id := Etype (U_Ent);
+ Expr : constant Node_Id := Expression (N);
+ O_Ent : Entity_Id;
+ Off : Boolean;
begin
- -- Exported variables cannot have an address clause,
- -- because this cancels the effect of the pragma Export
+ -- Exported variables cannot have an address clause, because
+ -- this cancels the effect of the pragma Export.
if Is_Exported (U_Ent) then
Error_Msg_N
("cannot export object with address clause", Nam);
+ return;
+ end if;
+
+ Find_Overlaid_Entity (N, O_Ent, Off);
+
+ -- Overlaying controlled objects is erroneous
+
+ if Present (O_Ent)
+ and then (Has_Controlled_Component (Etype (O_Ent))
+ or else Is_Controlled (Etype (O_Ent)))
+ then
+ Error_Msg_N
+ ("?cannot overlay with controlled object", Expr);
+ Error_Msg_N
+ ("\?Program_Error will be raised at run time", Expr);
+ Insert_Action (Declaration_Node (U_Ent),
+ Make_Raise_Program_Error (Loc,
+ Reason => PE_Overlaid_Controlled_Object));
+ return;
+
+ elsif Present (O_Ent)
+ and then Ekind (U_Ent) = E_Constant
+ and then not Is_Constant_Object (O_Ent)
+ then
+ Error_Msg_N ("constant overlays a variable?", Expr);
+
+ elsif Present (Renamed_Object (U_Ent)) then
+ Error_Msg_N
+ ("address clause not allowed"
+ & " for a renaming declaration (RM 13.1(6))", Nam);
+ return;
-- Imported variables can have an address clause, but then
-- the import is pretty meaningless except to suppress
-- We mark a possible modification of a variable with an
-- address clause, since it is likely aliasing is occurring.
- Note_Possible_Modification (Nam);
-
- -- If we have no initialization of any kind, then we can
- -- safely defer the elaboration of the variable to its
- -- freezing point, so that the address clause will be
- -- computed at the proper point.
-
- -- The same processing applies to all initialized scalar
- -- types and all access types. Packed bit arrays of size
- -- up to 64 are represented using a modular type with an
- -- initialization (to zero) and can be processed like
- -- other initialized scalar types.
-
- if (No (Expression (Decl))
- and then not Has_Non_Null_Base_Init_Proc (Typ))
-
- or else
- (Present (Expression (Decl))
- and then Is_Scalar_Type (Typ))
+ Note_Possible_Modification (Nam, Sure => False);
- or else
- Is_Access_Type (Typ)
+ -- Here we are checking for explicit overlap of one variable
+ -- by another, and if we find this then mark the overlapped
+ -- variable as also being volatile to prevent unwanted
+ -- optimizations. This is a significant pessimization so
+ -- avoid it when there is an offset, i.e. when the object
+ -- is composite; they cannot be optimized easily anyway.
- or else
- (Is_Bit_Packed_Array (Base_Type (Typ))
- and then
- Is_Modular_Integer_Type (Packed_Array_Type (Typ)))
+ if Present (O_Ent)
+ and then Is_Object (O_Ent)
+ and then not Off
then
- Set_Has_Delayed_Freeze (U_Ent);
-
- -- Otherwise, we require the address clause to be constant
-
- else
- Check_Constant_Address_Clause (Expr, U_Ent);
+ Set_Treat_As_Volatile (O_Ent);
end if;
+ -- Legality checks on the address clause for initialized
+ -- objects is deferred until the freeze point, because
+ -- a subsequent pragma might indicate that the object is
+ -- imported and thus not initialized.
+
+ Set_Has_Delayed_Freeze (U_Ent);
+
+ -- If an initialization call has been generated for this
+ -- object, it needs to be deferred to after the freeze node
+ -- we have just now added, otherwise GIGI will see a
+ -- reference to the variable (as actual to the IP call)
+ -- before its definition.
+
+ declare
+ Init_Call : constant Node_Id := Find_Init_Call (U_Ent, N);
+ begin
+ if Present (Init_Call) then
+ Remove (Init_Call);
+ Append_Freeze_Action (U_Ent, Init_Call);
+ end if;
+ end;
+
if Is_Exported (U_Ent) then
Error_Msg_N
("& cannot be exported if an address clause is given",
Nam);
end if;
- if not Error_Posted (Expr) then
- Warn_Overlay (Expr, Typ, Nam);
- end if;
-
- -- If entity has delayed freeze then we will generate
- -- an alignment check at the freeze point. If there is
- -- no delayed freeze we can do it right now.
+ -- Entity has delayed freeze, so we will generate an
+ -- alignment check at the freeze point unless suppressed.
- if not Has_Delayed_Freeze (U_Ent) then
- Apply_Alignment_Check (U_Ent, N);
+ if not Range_Checks_Suppressed (U_Ent)
+ and then not Alignment_Checks_Suppressed (U_Ent)
+ then
+ Set_Check_Address_Alignment (N);
end if;
-- Kill the size check code, since we are not allocating
-- the variable, it is somewhere else.
Kill_Size_Check_Code (U_Ent);
+
+ -- If the address clause is of the form:
+
+ -- for Y'Address use X'Address
+
+ -- or
+
+ -- Const : constant Address := X'Address;
+ -- ...
+ -- for Y'Address use Const;
+
+ -- then we make an entry in the table for checking the size
+ -- and alignment of the overlaying variable. We defer this
+ -- check till after code generation to take full advantage
+ -- of the annotation done by the back end. This entry is
+ -- only made if the address clause comes from source.
+ -- If the entity has a generic type, the check will be
+ -- performed in the instance if the actual type justifies
+ -- it, and we do not insert the clause in the table to
+ -- prevent spurious warnings.
+
+ if Address_Clause_Overlay_Warnings
+ and then Comes_From_Source (N)
+ and then Present (O_Ent)
+ and then Is_Object (O_Ent)
+ then
+ if not Is_Generic_Type (Etype (U_Ent)) then
+ Address_Clause_Checks.Append ((N, U_Ent, O_Ent, Off));
+ end if;
+
+ -- If variable overlays a constant view, and we are
+ -- warning on overlays, then mark the variable as
+ -- overlaying a constant (we will give warnings later
+ -- if this variable is assigned).
+
+ if Is_Constant_Object (O_Ent)
+ and then Ekind (U_Ent) = E_Variable
+ then
+ Set_Overlays_Constant (U_Ent);
+ end if;
+ end if;
end;
-- Not a valid entity for an address clause
-- Alignment attribute definition clause
- when Attribute_Alignment => Alignment_Block : declare
- Align : Uint := Get_Alignment_Value (Expr);
+ when Attribute_Alignment => Alignment : declare
+ Align : constant Uint := Get_Alignment_Value (Expr);
begin
FOnly := True;
elsif Align /= No_Uint then
Set_Has_Alignment_Clause (U_Ent);
Set_Alignment (U_Ent, Align);
+
+ -- For an array type, U_Ent is the first subtype. In that case,
+ -- also set the alignment of the anonymous base type so that
+ -- other subtypes (such as the itypes for aggregates of the
+ -- type) also receive the expected alignment.
+
+ if Is_Array_Type (U_Ent) then
+ Set_Alignment (Base_Type (U_Ent), Align);
+ end if;
end if;
- end Alignment_Block;
+ end Alignment;
---------------
-- Bit_Order --
return;
elsif not Is_Static_Expression (Expr) then
- Error_Msg_N ("Bit_Order requires static expression", Expr);
+ Flag_Non_Static_Expr
+ ("Bit_Order requires static expression!", Expr);
else
if (Expr_Value (Expr) = 0) /= Bytes_Big_Endian then
when Attribute_Component_Size => Component_Size_Case : declare
Csize : constant Uint := Static_Integer (Expr);
+ Ctyp : Entity_Id;
Btype : Entity_Id;
Biased : Boolean;
New_Ctyp : Entity_Id;
end if;
Btype := Base_Type (U_Ent);
+ Ctyp := Component_Type (Btype);
if Has_Component_Size_Clause (Btype) then
Error_Msg_N
- ("component size clase for& previously given", Nam);
+ ("component size clause for& previously given", Nam);
- elsif Csize /= No_Uint then
- Check_Size (Expr, Component_Type (Btype), Csize, Biased);
+ elsif Rep_Item_Too_Early (Btype, N) then
+ null;
- if Has_Aliased_Components (Btype)
- and then Csize < 32
- and then Csize /= 8
- and then Csize /= 16
- then
- Error_Msg_N
- ("component size incorrect for aliased components", N);
- return;
- end if;
+ elsif Csize /= No_Uint then
+ Check_Size (Expr, Ctyp, Csize, Biased);
-- For the biased case, build a declaration for a subtype
-- that will be used to represent the biased subtype that
-- reflects the biased representation of components. We need
-- this subtype to get proper conversions on referencing
- -- elements of the array.
+ -- elements of the array. Note that component size clauses
+ -- are ignored in VM mode.
+
+ if VM_Target = No_VM then
+ if Biased then
+ New_Ctyp :=
+ Make_Defining_Identifier (Loc,
+ Chars =>
+ New_External_Name (Chars (U_Ent), 'C', 0, 'T'));
+
+ Decl :=
+ Make_Subtype_Declaration (Loc,
+ Defining_Identifier => New_Ctyp,
+ Subtype_Indication =>
+ New_Occurrence_Of (Component_Type (Btype), Loc));
+
+ Set_Parent (Decl, N);
+ Analyze (Decl, Suppress => All_Checks);
+
+ Set_Has_Delayed_Freeze (New_Ctyp, False);
+ Set_Esize (New_Ctyp, Csize);
+ Set_RM_Size (New_Ctyp, Csize);
+ Init_Alignment (New_Ctyp);
+ Set_Is_Itype (New_Ctyp, True);
+ Set_Associated_Node_For_Itype (New_Ctyp, U_Ent);
+
+ Set_Component_Type (Btype, New_Ctyp);
+ Set_Biased (New_Ctyp, N, "component size clause");
+ end if;
- if Biased then
- New_Ctyp :=
- Make_Defining_Identifier (Loc,
- Chars => New_External_Name (Chars (U_Ent), 'C', 0, 'T'));
+ Set_Component_Size (Btype, Csize);
- Decl :=
- Make_Subtype_Declaration (Loc,
- Defining_Identifier => New_Ctyp,
- Subtype_Indication =>
- New_Occurrence_Of (Component_Type (Btype), Loc));
+ -- For VM case, we ignore component size clauses
+
+ else
+ -- Give a warning unless we are in GNAT mode, in which case
+ -- the warning is suppressed since it is not useful.
- Set_Parent (Decl, N);
- Analyze (Decl, Suppress => All_Checks);
+ if not GNAT_Mode then
+ Error_Msg_N
+ ("?component size ignored in this configuration", N);
+ end if;
+ end if;
- Set_Has_Delayed_Freeze (New_Ctyp, False);
- Set_Esize (New_Ctyp, Csize);
- Set_RM_Size (New_Ctyp, Csize);
- Init_Alignment (New_Ctyp);
- Set_Has_Biased_Representation (New_Ctyp, True);
- Set_Is_Itype (New_Ctyp, True);
- Set_Associated_Node_For_Itype (New_Ctyp, U_Ent);
+ -- Deal with warning on overridden size
- Set_Component_Type (Btype, New_Ctyp);
+ if Warn_On_Overridden_Size
+ and then Has_Size_Clause (Ctyp)
+ and then RM_Size (Ctyp) /= Csize
+ then
+ Error_Msg_NE
+ ("?component size overrides size clause for&",
+ N, Ctyp);
end if;
- Set_Component_Size (Btype, Csize);
Set_Has_Component_Size_Clause (Btype, True);
- Set_Has_Non_Standard_Rep (Btype, True);
+ Set_Has_Non_Standard_Rep (Btype, True);
end if;
end Component_Size_Case;
Analyze_And_Resolve (Expr, Standard_String);
if not Is_Static_Expression (Expr) then
- Error_Msg_N ("must be a static string", Nam);
+ Flag_Non_Static_Expr
+ ("static string required for tag name!", Nam);
+ end if;
+
+ if VM_Target = No_VM then
+ Set_Has_External_Tag_Rep_Clause (U_Ent);
+ else
+ Error_Msg_Name_1 := Attr;
+ Error_Msg_N
+ ("% attribute unsupported in this configuration", Nam);
end if;
- Set_Has_External_Tag_Rep_Clause (U_Ent);
+ if not Is_Library_Level_Entity (U_Ent) then
+ Error_Msg_NE
+ ("?non-unique external tag supplied for &", N, U_Ent);
+ Error_Msg_N
+ ("?\same external tag applies to all subprogram calls", N);
+ Error_Msg_N
+ ("?\corresponding internal tag cannot be obtained", N);
+ end if;
end External_Tag;
-----------
-- Input --
-----------
- when Attribute_Input => Input : declare
- Subp : Entity_Id := Empty;
- I : Interp_Index;
- It : Interp;
- Pnam : Entity_Id;
-
- function Has_Good_Profile (Subp : Entity_Id) return Boolean;
- -- Return true if the entity is a function with an appropriate
- -- profile for the Input attribute.
-
- function Has_Good_Profile (Subp : Entity_Id) return Boolean is
- F : Entity_Id;
- Ok : Boolean := False;
-
- begin
- if Ekind (Subp) = E_Function then
- F := First_Formal (Subp);
-
- if Present (F) and then No (Next_Formal (F)) then
- if Ekind (Etype (F)) = E_Anonymous_Access_Type
- and then
- Designated_Type (Etype (F)) =
- Class_Wide_Type (RTE (RE_Root_Stream_Type))
- then
- Ok := Base_Type (Etype (Subp)) = Base_Type (Ent);
- end if;
- end if;
- end if;
-
- return Ok;
- end Has_Good_Profile;
-
- -- Start of processing for Input attribute definition
-
- begin
- FOnly := True;
-
- if not Is_Type (U_Ent) then
- Error_Msg_N ("local name must be a subtype", Nam);
- return;
-
- else
- Pnam := TSS (Base_Type (U_Ent), Name_uInput);
-
- if Present (Pnam)
- and then Base_Type (Etype (Pnam)) = Base_Type (U_Ent)
- then
- Error_Msg_Sloc := Sloc (Pnam);
- Error_Msg_N ("input attribute already defined #", Nam);
- return;
- end if;
- end if;
-
- Analyze (Expr);
-
- if Is_Entity_Name (Expr) then
- if not Is_Overloaded (Expr) then
- if Has_Good_Profile (Entity (Expr)) then
- Subp := Entity (Expr);
- end if;
-
- else
- Get_First_Interp (Expr, I, It);
-
- while Present (It.Nam) loop
- if Has_Good_Profile (It.Nam) then
- Subp := It.Nam;
- exit;
- end if;
-
- Get_Next_Interp (I, It);
- end loop;
- end if;
- end if;
-
- if Present (Subp) then
- Set_Entity (Expr, Subp);
- Set_Etype (Expr, Etype (Subp));
- New_Stream_Function (N, U_Ent, Subp, Name_uInput);
- else
- Error_Msg_N ("incorrect expression for input attribute", Expr);
- return;
- end if;
- end Input;
+ when Attribute_Input =>
+ Analyze_Stream_TSS_Definition (TSS_Stream_Input);
+ Set_Has_Specified_Stream_Input (Ent);
-------------------
-- Machine_Radix --
-- Object_Size attribute definition clause
when Attribute_Object_Size => Object_Size : declare
- Size : constant Uint := Static_Integer (Expr);
+ Size : constant Uint := Static_Integer (Expr);
+
Biased : Boolean;
+ pragma Warnings (Off, Biased);
begin
if not Is_Type (U_Ent) then
-- Output --
------------
- when Attribute_Output => Output : declare
- Subp : Entity_Id := Empty;
- I : Interp_Index;
- It : Interp;
- Pnam : Entity_Id;
-
- function Has_Good_Profile (Subp : Entity_Id) return Boolean;
- -- Return true if the entity is a procedure with an
- -- appropriate profile for the output attribute.
-
- function Has_Good_Profile (Subp : Entity_Id) return Boolean is
- F : Entity_Id;
- Ok : Boolean := False;
-
- begin
- if Ekind (Subp) = E_Procedure then
- F := First_Formal (Subp);
-
- if Present (F) then
- if Ekind (Etype (F)) = E_Anonymous_Access_Type
- and then
- Designated_Type (Etype (F)) =
- Class_Wide_Type (RTE (RE_Root_Stream_Type))
- then
- Next_Formal (F);
- Ok := Present (F)
- and then Parameter_Mode (F) = E_In_Parameter
- and then Base_Type (Etype (F)) = Base_Type (Ent)
- and then No (Next_Formal (F));
- end if;
- end if;
- end if;
-
- return Ok;
- end Has_Good_Profile;
-
- begin
- FOnly := True;
-
- if not Is_Type (U_Ent) then
- Error_Msg_N ("local name must be a subtype", Nam);
- return;
-
- else
- Pnam := TSS (Base_Type (U_Ent), Name_uOutput);
-
- if Present (Pnam)
- and then
- Base_Type (Etype (Next_Formal (First_Formal (Pnam))))
- = Base_Type (U_Ent)
- then
- Error_Msg_Sloc := Sloc (Pnam);
- Error_Msg_N ("output attribute already defined #", Nam);
- return;
- end if;
- end if;
-
- Analyze (Expr);
-
- if Is_Entity_Name (Expr) then
- if not Is_Overloaded (Expr) then
- if Has_Good_Profile (Entity (Expr)) then
- Subp := Entity (Expr);
- end if;
-
- else
- Get_First_Interp (Expr, I, It);
-
- while Present (It.Nam) loop
- if Has_Good_Profile (It.Nam) then
- Subp := It.Nam;
- exit;
- end if;
-
- Get_Next_Interp (I, It);
- end loop;
- end if;
- end if;
-
- if Present (Subp) then
- Set_Entity (Expr, Subp);
- Set_Etype (Expr, Etype (Subp));
- New_Stream_Procedure (N, U_Ent, Subp, Name_uOutput);
- else
- Error_Msg_N ("incorrect expression for output attribute", Expr);
- return;
- end if;
- end Output;
+ when Attribute_Output =>
+ Analyze_Stream_TSS_Definition (TSS_Stream_Output);
+ Set_Has_Specified_Stream_Output (Ent);
----------
-- Read --
----------
- when Attribute_Read => Read : declare
- Subp : Entity_Id := Empty;
- I : Interp_Index;
- It : Interp;
- Pnam : Entity_Id;
-
- function Has_Good_Profile (Subp : Entity_Id) return Boolean;
- -- Return true if the entity is a procedure with an appropriate
- -- profile for the Read attribute.
-
- function Has_Good_Profile (Subp : Entity_Id) return Boolean is
- F : Entity_Id;
- Ok : Boolean := False;
-
- begin
- if Ekind (Subp) = E_Procedure then
- F := First_Formal (Subp);
-
- if Present (F) then
- if Ekind (Etype (F)) = E_Anonymous_Access_Type
- and then
- Designated_Type (Etype (F)) =
- Class_Wide_Type (RTE (RE_Root_Stream_Type))
- then
- Next_Formal (F);
- Ok := Present (F)
- and then Parameter_Mode (F) = E_Out_Parameter
- and then Base_Type (Etype (F)) = Base_Type (Ent)
- and then No (Next_Formal (F));
- end if;
- end if;
- end if;
-
- return Ok;
- end Has_Good_Profile;
-
- -- Start of processing for Read attribute definition
-
- begin
- FOnly := True;
-
- if not Is_Type (U_Ent) then
- Error_Msg_N ("local name must be a subtype", Nam);
- return;
-
- else
- Pnam := TSS (Base_Type (U_Ent), Name_uRead);
-
- if Present (Pnam)
- and then Base_Type (Etype (Next_Formal (First_Formal (Pnam))))
- = Base_Type (U_Ent)
- then
- Error_Msg_Sloc := Sloc (Pnam);
- Error_Msg_N ("read attribute already defined #", Nam);
- return;
- end if;
- end if;
-
- Analyze (Expr);
-
- if Is_Entity_Name (Expr) then
- if not Is_Overloaded (Expr) then
- if Has_Good_Profile (Entity (Expr)) then
- Subp := Entity (Expr);
- end if;
-
- else
- Get_First_Interp (Expr, I, It);
-
- while Present (It.Nam) loop
- if Has_Good_Profile (It.Nam) then
- Subp := It.Nam;
- exit;
- end if;
-
- Get_Next_Interp (I, It);
- end loop;
- end if;
- end if;
-
- if Present (Subp) then
- Set_Entity (Expr, Subp);
- Set_Etype (Expr, Etype (Subp));
- New_Stream_Procedure (N, U_Ent, Subp, Name_uRead, True);
- else
- Error_Msg_N ("incorrect expression for read attribute", Expr);
- return;
- end if;
- end Read;
+ when Attribute_Read =>
+ Analyze_Stream_TSS_Definition (TSS_Stream_Read);
+ Set_Has_Specified_Stream_Read (Ent);
----------
-- Size --
elsif Size /= No_Uint then
+ if VM_Target /= No_VM and then not GNAT_Mode then
+
+ -- Size clause is not handled properly on VM targets.
+ -- Display a warning unless we are in GNAT mode, in which
+ -- case this is useless.
+
+ Error_Msg_N
+ ("?size clauses are ignored in this configuration", N);
+ end if;
+
if Is_Type (U_Ent) then
Etyp := U_Ent;
else
Etyp := Etype (U_Ent);
end if;
- -- Check size, note that Gigi is in charge of checking
- -- that the size of an array or record type is OK. Also
- -- we do not check the size in the ordinary fixed-point
- -- case, since it is too early to do so (there may be a
- -- subsequent small clause that affects the size). We can
- -- check the size if a small clause has already been given.
+ -- Check size, note that Gigi is in charge of checking that the
+ -- size of an array or record type is OK. Also we do not check
+ -- the size in the ordinary fixed-point case, since it is too
+ -- early to do so (there may be subsequent small clause that
+ -- affects the size). We can check the size if a small clause
+ -- has already been given.
if not Is_Ordinary_Fixed_Point_Type (U_Ent)
or else Has_Small_Clause (U_Ent)
then
Check_Size (Expr, Etyp, Size, Biased);
- Set_Has_Biased_Representation (U_Ent, Biased);
+ Set_Biased (U_Ent, N, "size clause", Biased);
end if;
-- For types set RM_Size and Esize if possible
if Is_Type (U_Ent) then
Set_RM_Size (U_Ent, Size);
- -- For scalar types, increase Object_Size to power of 2,
- -- but not less than 8 in any case, i.e. byte addressable.
+ -- For scalar types, increase Object_Size to power of 2, but
+ -- not less than a storage unit in any case (i.e., normally
+ -- this means it will be byte addressable).
if Is_Scalar_Type (U_Ent) then
- if Size <= 8 then
- Init_Esize (U_Ent, 8);
+ if Size <= System_Storage_Unit then
+ Init_Esize (U_Ent, System_Storage_Unit);
elsif Size <= 16 then
Init_Esize (U_Ent, 16);
elsif Size <= 32 then
-- For objects, set Esize only
else
+ if Is_Elementary_Type (Etyp) then
+ if Size /= System_Storage_Unit
+ and then
+ Size /= System_Storage_Unit * 2
+ and then
+ Size /= System_Storage_Unit * 4
+ and then
+ Size /= System_Storage_Unit * 8
+ then
+ Error_Msg_Uint_1 := UI_From_Int (System_Storage_Unit);
+ Error_Msg_Uint_2 := Error_Msg_Uint_1 * 8;
+ Error_Msg_N
+ ("size for primitive object must be a power of 2"
+ & " in the range ^-^", N);
+ end if;
+ end if;
+
Set_Esize (U_Ent, Size);
end if;
return;
elsif not Is_Static_Expression (Expr) then
- Error_Msg_N ("small requires static expression", Expr);
+ Flag_Non_Static_Expr
+ ("small requires static expression!", Expr);
return;
else
end Small;
------------------
- -- Storage_Size --
+ -- Storage_Pool --
------------------
- -- Storage_Size attribute definition clause
+ -- Storage_Pool attribute definition clause
- when Attribute_Storage_Size => Storage_Size : declare
- Btype : constant Entity_Id := Base_Type (U_Ent);
- Sprag : Node_Id;
+ when Attribute_Storage_Pool => Storage_Pool : declare
+ Pool : Entity_Id;
+ T : Entity_Id;
begin
- if Is_Task_Type (U_Ent) then
- FOnly := True;
- end if;
+ if Ekind (U_Ent) = E_Access_Subprogram_Type then
+ Error_Msg_N
+ ("storage pool cannot be given for access-to-subprogram type",
+ Nam);
+ return;
- if not Is_Access_Type (U_Ent)
- and then Ekind (U_Ent) /= E_Task_Type
+ elsif not
+ Ekind_In (U_Ent, E_Access_Type, E_General_Access_Type)
then
- Error_Msg_N ("storage size cannot be given for &", Nam);
-
- elsif Is_Access_Type (U_Ent) and Is_Derived_Type (U_Ent) then
Error_Msg_N
- ("storage size cannot be given for a derived access type",
- Nam);
-
- elsif Has_Storage_Size_Clause (Btype) then
- Error_Msg_N ("storage size already given for &", Nam);
-
- else
- Analyze_And_Resolve (Expr, Any_Integer);
-
- if Is_Access_Type (U_Ent) then
-
- if Present (Associated_Storage_Pool (U_Ent)) then
- Error_Msg_N ("storage pool already given for &", Nam);
- return;
- end if;
-
- if Compile_Time_Known_Value (Expr)
- and then Expr_Value (Expr) = 0
- then
- Set_No_Pool_Assigned (Btype);
- end if;
-
- else -- Is_Task_Type (U_Ent)
- Sprag := Get_Rep_Pragma (Btype, Name_Storage_Size);
-
- if Present (Sprag) then
- Error_Msg_Sloc := Sloc (Sprag);
- Error_Msg_N
- ("Storage_Size already specified#", Nam);
- return;
- end if;
- end if;
-
- Set_Has_Storage_Size_Clause (Btype);
- end if;
- end Storage_Size;
-
- ------------------
- -- Storage_Pool --
- ------------------
-
- -- Storage_Pool attribute definition clause
-
- when Attribute_Storage_Pool => Storage_Pool : declare
- Pool : Entity_Id;
-
- begin
- if Ekind (U_Ent) /= E_Access_Type
- and then Ekind (U_Ent) /= E_General_Access_Type
- then
- Error_Msg_N (
- "storage pool can only be given for access types", Nam);
+ ("storage pool can only be given for access types", Nam);
return;
elsif Is_Derived_Type (U_Ent) then
Analyze_And_Resolve
(Expr, Class_Wide_Type (RTE (RE_Root_Storage_Pool)));
+ if not Denotes_Variable (Expr) then
+ Error_Msg_N ("storage pool must be a variable", Expr);
+ return;
+ end if;
+
+ if Nkind (Expr) = N_Type_Conversion then
+ T := Etype (Expression (Expr));
+ else
+ T := Etype (Expr);
+ end if;
+
+ -- The Stack_Bounded_Pool is used internally for implementing
+ -- access types with a Storage_Size. Since it only work
+ -- properly when used on one specific type, we need to check
+ -- that it is not hijacked improperly:
+ -- type T is access Integer;
+ -- for T'Storage_Size use n;
+ -- type Q is access Float;
+ -- for Q'Storage_Size use T'Storage_Size; -- incorrect
+
+ if RTE_Available (RE_Stack_Bounded_Pool)
+ and then Base_Type (T) = RTE (RE_Stack_Bounded_Pool)
+ then
+ Error_Msg_N ("non-shareable internal Pool", Expr);
+ return;
+ end if;
+
-- If the argument is a name that is not an entity name, then
-- we construct a renaming operation to define an entity of
-- type storage pool.
if not Is_Entity_Name (Expr)
and then Is_Object_Reference (Expr)
then
- Pool :=
- Make_Defining_Identifier (Loc,
- Chars => New_Internal_Name ('P'));
+ Pool := Make_Temporary (Loc, 'P', Expr);
declare
Rnode : constant Node_Id :=
Defining_Identifier => Pool,
Subtype_Mark =>
New_Occurrence_Of (Etype (Expr), Loc),
- Name => Expr);
+ Name => Expr);
begin
Insert_Before (N, Rnode);
Pool := Entity (Expression (Renamed_Object (Pool)));
end if;
- if Present (Etype (Pool))
- and then Etype (Pool) /= RTE (RE_Stack_Bounded_Pool)
- and then Etype (Pool) /= RTE (RE_Unbounded_Reclaim_Pool)
- then
- Set_Associated_Storage_Pool (U_Ent, Pool);
- else
- Error_Msg_N ("Non sharable GNAT Pool", Expr);
- end if;
-
- -- The pool may be specified as the Storage_Pool of some other
- -- type. It is rewritten as a class_wide conversion of the
- -- corresponding pool entity.
+ Set_Associated_Storage_Pool (U_Ent, Pool);
elsif Nkind (Expr) = N_Type_Conversion
and then Is_Entity_Name (Expression (Expr))
and then Nkind (Original_Node (Expr)) = N_Attribute_Reference
then
Pool := Entity (Expression (Expr));
-
- if Present (Etype (Pool))
- and then Etype (Pool) /= RTE (RE_Stack_Bounded_Pool)
- and then Etype (Pool) /= RTE (RE_Unbounded_Reclaim_Pool)
- then
- Set_Associated_Storage_Pool (U_Ent, Pool);
- else
- Error_Msg_N ("Non sharable GNAT Pool", Expr);
- end if;
+ Set_Associated_Storage_Pool (U_Ent, Pool);
else
Error_Msg_N ("incorrect reference to a Storage Pool", Expr);
end if;
end Storage_Pool;
+ ------------------
+ -- Storage_Size --
+ ------------------
+
+ -- Storage_Size attribute definition clause
+
+ when Attribute_Storage_Size => Storage_Size : declare
+ Btype : constant Entity_Id := Base_Type (U_Ent);
+ Sprag : Node_Id;
+
+ begin
+ if Is_Task_Type (U_Ent) then
+ Check_Restriction (No_Obsolescent_Features, N);
+
+ if Warn_On_Obsolescent_Feature then
+ Error_Msg_N
+ ("storage size clause for task is an " &
+ "obsolescent feature (RM J.9)?", N);
+ Error_Msg_N ("\use Storage_Size pragma instead?", N);
+ end if;
+
+ FOnly := True;
+ end if;
+
+ if not Is_Access_Type (U_Ent)
+ and then Ekind (U_Ent) /= E_Task_Type
+ then
+ Error_Msg_N ("storage size cannot be given for &", Nam);
+
+ elsif Is_Access_Type (U_Ent) and Is_Derived_Type (U_Ent) then
+ Error_Msg_N
+ ("storage size cannot be given for a derived access type",
+ Nam);
+
+ elsif Has_Storage_Size_Clause (Btype) then
+ Error_Msg_N ("storage size already given for &", Nam);
+
+ else
+ Analyze_And_Resolve (Expr, Any_Integer);
+
+ if Is_Access_Type (U_Ent) then
+ if Present (Associated_Storage_Pool (U_Ent)) then
+ Error_Msg_N ("storage pool already given for &", Nam);
+ return;
+ end if;
+
+ if Is_OK_Static_Expression (Expr)
+ and then Expr_Value (Expr) = 0
+ then
+ Set_No_Pool_Assigned (Btype);
+ end if;
+
+ else -- Is_Task_Type (U_Ent)
+ Sprag := Get_Rep_Pragma (Btype, Name_Storage_Size);
+
+ if Present (Sprag) then
+ Error_Msg_Sloc := Sloc (Sprag);
+ Error_Msg_N
+ ("Storage_Size already specified#", Nam);
+ return;
+ end if;
+ end if;
+
+ Set_Has_Storage_Size_Clause (Btype);
+ end if;
+ end Storage_Size;
+
+ -----------------
+ -- Stream_Size --
+ -----------------
+
+ when Attribute_Stream_Size => Stream_Size : declare
+ Size : constant Uint := Static_Integer (Expr);
+
+ begin
+ if Ada_Version <= Ada_95 then
+ Check_Restriction (No_Implementation_Attributes, N);
+ end if;
+
+ if Has_Stream_Size_Clause (U_Ent) then
+ Error_Msg_N ("Stream_Size already given for &", Nam);
+
+ elsif Is_Elementary_Type (U_Ent) then
+ if Size /= System_Storage_Unit
+ and then
+ Size /= System_Storage_Unit * 2
+ and then
+ Size /= System_Storage_Unit * 4
+ and then
+ Size /= System_Storage_Unit * 8
+ then
+ Error_Msg_Uint_1 := UI_From_Int (System_Storage_Unit);
+ Error_Msg_N
+ ("stream size for elementary type must be a"
+ & " power of 2 and at least ^", N);
+
+ elsif RM_Size (U_Ent) > Size then
+ Error_Msg_Uint_1 := RM_Size (U_Ent);
+ Error_Msg_N
+ ("stream size for elementary type must be a"
+ & " power of 2 and at least ^", N);
+ end if;
+
+ Set_Has_Stream_Size_Clause (U_Ent);
+
+ else
+ Error_Msg_N ("Stream_Size cannot be given for &", Nam);
+ end if;
+ end Stream_Size;
+
----------------
-- Value_Size --
----------------
then
Error_Msg_N ("Value_Size already given for &", Nam);
+ elsif Is_Array_Type (U_Ent)
+ and then not Is_Constrained (U_Ent)
+ then
+ Error_Msg_N
+ ("Value_Size cannot be given for unconstrained array", Nam);
+
else
if Is_Elementary_Type (U_Ent) then
Check_Size (Expr, U_Ent, Size, Biased);
- Set_Has_Biased_Representation (U_Ent, Biased);
+ Set_Biased (U_Ent, N, "value size clause", Biased);
end if;
Set_RM_Size (U_Ent, Size);
-- Write --
-----------
- -- Write attribute definition clause
- -- check for class-wide case will be performed later
-
- when Attribute_Write => Write : declare
- Subp : Entity_Id := Empty;
- I : Interp_Index;
- It : Interp;
- Pnam : Entity_Id;
-
- function Has_Good_Profile (Subp : Entity_Id) return Boolean;
- -- Return true if the entity is a procedure with an
- -- appropriate profile for the write attribute.
-
- function Has_Good_Profile (Subp : Entity_Id) return Boolean is
- F : Entity_Id;
- Ok : Boolean := False;
-
- begin
- if Ekind (Subp) = E_Procedure then
- F := First_Formal (Subp);
-
- if Present (F) then
- if Ekind (Etype (F)) = E_Anonymous_Access_Type
- and then
- Designated_Type (Etype (F)) =
- Class_Wide_Type (RTE (RE_Root_Stream_Type))
- then
- Next_Formal (F);
- Ok := Present (F)
- and then Parameter_Mode (F) = E_In_Parameter
- and then Base_Type (Etype (F)) = Base_Type (Ent)
- and then No (Next_Formal (F));
- end if;
- end if;
- end if;
-
- return Ok;
- end Has_Good_Profile;
-
- -- Start of processing for Write attribute definition
-
- begin
- FOnly := True;
-
- if not Is_Type (U_Ent) then
- Error_Msg_N ("local name must be a subtype", Nam);
- return;
- end if;
-
- Pnam := TSS (Base_Type (U_Ent), Name_uWrite);
-
- if Present (Pnam)
- and then Base_Type (Etype (Next_Formal (First_Formal (Pnam))))
- = Base_Type (U_Ent)
- then
- Error_Msg_Sloc := Sloc (Pnam);
- Error_Msg_N ("write attribute already defined #", Nam);
- return;
- end if;
-
- Analyze (Expr);
-
- if Is_Entity_Name (Expr) then
- if not Is_Overloaded (Expr) then
- if Has_Good_Profile (Entity (Expr)) then
- Subp := Entity (Expr);
- end if;
-
- else
- Get_First_Interp (Expr, I, It);
-
- while Present (It.Nam) loop
- if Has_Good_Profile (It.Nam) then
- Subp := It.Nam;
- exit;
- end if;
-
- Get_Next_Interp (I, It);
- end loop;
- end if;
- end if;
-
- if Present (Subp) then
- Set_Entity (Expr, Subp);
- Set_Etype (Expr, Etype (Subp));
- New_Stream_Procedure (N, U_Ent, Subp, Name_uWrite);
- else
- Error_Msg_N ("incorrect expression for write attribute", Expr);
- return;
- end if;
- end Write;
+ when Attribute_Write =>
+ Analyze_Stream_TSS_Definition (TSS_Stream_Write);
+ Set_Has_Specified_Stream_Write (Ent);
-- All other attributes cannot be set
when others =>
Error_Msg_N
("attribute& cannot be set with definition clause", N);
-
end case;
-- The test for the type being frozen must be performed after
return;
end if;
+ Check_Code_Statement (N);
+
-- Make sure we appear in the handled statement sequence of a
-- subprogram (RM 13.8(3)).
while Present (Decl) loop
DeclO := Original_Node (Decl);
if Comes_From_Source (DeclO)
- and then Nkind (DeclO) /= N_Pragma
- and then Nkind (DeclO) /= N_Use_Package_Clause
- and then Nkind (DeclO) /= N_Use_Type_Clause
- and then Nkind (DeclO) /= N_Implicit_Label_Declaration
+ and not Nkind_In (DeclO, N_Pragma,
+ N_Use_Package_Clause,
+ N_Use_Type_Clause,
+ N_Implicit_Label_Declaration)
then
Error_Msg_N
("this declaration not allowed in machine code subprogram",
while Present (Stmt) loop
StmtO := Original_Node (Stmt);
if Comes_From_Source (StmtO)
- and then Nkind (StmtO) /= N_Pragma
- and then Nkind (StmtO) /= N_Label
- and then Nkind (StmtO) /= N_Code_Statement
+ and then not Nkind_In (StmtO, N_Pragma,
+ N_Label,
+ N_Code_Statement)
then
Error_Msg_N
("this statement is not allowed in machine code subprogram",
Next (Stmt);
end loop;
end if;
-
end Analyze_Code_Statement;
-----------------------------------------------
Val : Uint;
Err : Boolean := False;
- Lo : constant Uint := Expr_Value (Type_Low_Bound (Universal_Integer));
- Hi : constant Uint := Expr_Value (Type_High_Bound (Universal_Integer));
+ Lo : constant Uint := Expr_Value (Type_Low_Bound (Universal_Integer));
+ Hi : constant Uint := Expr_Value (Type_High_Bound (Universal_Integer));
+ -- Allowed range of universal integer (= allowed range of enum lit vals)
+
Min : Uint;
Max : Uint;
+ -- Minimum and maximum values of entries
+
+ Max_Node : Node_Id;
+ -- Pointer to node for literal providing max value
begin
+ if Ignore_Rep_Clauses then
+ return;
+ end if;
+
-- First some basic error checks
Find_Type (Ident);
return;
end if;
- if Scope (Enumtype) /= Current_Scope then
+ -- Ignore rep clause on generic actual type. This will already have
+ -- been flagged on the template as an error, and this is the safest
+ -- way to ensure we don't get a junk cascaded message in the instance.
+
+ if Is_Generic_Actual_Type (Enumtype) then
+ return;
+
+ -- Type must be in current scope
+
+ elsif Scope (Enumtype) /= Current_Scope then
Error_Msg_N ("type must be declared in this scope", Ident);
return;
+ -- Type must be a first subtype
+
elsif not Is_First_Subtype (Enumtype) then
Error_Msg_N ("cannot give enumeration rep clause for subtype", N);
return;
+ -- Ignore duplicate rep clause
+
elsif Has_Enumeration_Rep_Clause (Enumtype) then
Error_Msg_N ("duplicate enumeration rep clause ignored", N);
return;
- elsif Root_Type (Enumtype) = Standard_Character
- or else Root_Type (Enumtype) = Standard_Wide_Character
- then
+ -- Don't allow rep clause for standard [wide_[wide_]]character
+
+ elsif Is_Standard_Character_Type (Enumtype) then
Error_Msg_N ("enumeration rep clause not allowed for this type", N);
+ return;
+
+ -- Check that the expression is a proper aggregate (no parentheses)
+
+ elsif Paren_Count (Aggr) /= 0 then
+ Error_Msg
+ ("extra parentheses surrounding aggregate not allowed",
+ First_Sloc (Aggr));
+ return;
+
+ -- All tests passed, so set rep clause in place
else
Set_Has_Enumeration_Rep_Clause (Enumtype);
-- normal expansion activities, and a number of special semantic
-- rules apply (including the component type being any integer type)
- -- Badent signals that we found some incorrect entries processing
- -- the list. The final checks for completeness and ordering are
- -- skipped in this case.
-
Elit := First_Literal (Enumtype);
-- First the positional entries if any
Val := Static_Integer (Expr);
+ -- Err signals that we found some incorrect entries processing
+ -- the list. The final checks for completeness and ordering are
+ -- skipped in this case.
+
if Val = No_Uint then
Err := True;
-
elsif Val < Lo or else Hi < Val then
Error_Msg_N ("value outside permitted range", Expr);
Err := True;
elsif Etype (Choice) = Base_Type (Enumtype) then
if not Is_Static_Expression (Choice) then
- Error_Msg_N
- ("non-static expression used for choice", Choice);
+ Flag_Non_Static_Expr
+ ("non-static expression used for choice!", Choice);
Err := True;
else
Err := True;
end if;
- Set_Enumeration_Rep_Expr (Elit, Choice);
+ Set_Enumeration_Rep_Expr (Elit, Expression (Assoc));
Expr := Expression (Assoc);
Val := Static_Integer (Expr);
if Max /= No_Uint and then Val <= Max then
Error_Msg_NE
("enumeration value for& not ordered!",
- Enumeration_Rep_Expr (Elit), Elit);
+ Enumeration_Rep_Expr (Elit), Elit);
end if;
+ Max_Node := Enumeration_Rep_Expr (Elit);
Max := Val;
end if;
- -- If there is at least one literal whose representation
- -- is not equal to the Pos value, then note that this
- -- enumeration type has a non-standard representation.
+ -- If there is at least one literal whose representation is not
+ -- equal to the Pos value, then note that this enumeration type
+ -- has a non-standard representation.
if Val /= Enumeration_Pos (Elit) then
Set_Has_Non_Standard_Rep (Base_Type (Enumtype));
begin
if Has_Size_Clause (Enumtype) then
- if Esize (Enumtype) >= Minsize then
+
+ -- All OK, if size is OK now
+
+ if RM_Size (Enumtype) >= Minsize then
null;
else
+ -- Try if we can get by with biasing
+
Minsize :=
UI_From_Int (Minimum_Size (Enumtype, Biased => True));
- if Esize (Enumtype) < Minsize then
- Error_Msg_N ("previously given size is too small", N);
+ -- Error message if even biasing does not work
+
+ if RM_Size (Enumtype) < Minsize then
+ Error_Msg_Uint_1 := RM_Size (Enumtype);
+ Error_Msg_Uint_2 := Max;
+ Error_Msg_N
+ ("previously given size (^) is too small "
+ & "for this value (^)", Max_Node);
+
+ -- If biasing worked, indicate that we now have biased rep
else
- Set_Has_Biased_Representation (Enumtype);
+ Set_Biased
+ (Enumtype, Size_Clause (Enumtype), "size clause");
end if;
end if;
if Rep_Item_Too_Late (Enumtype, N) then
null;
end if;
-
end Analyze_Enumeration_Representation_Clause;
----------------------------
Analyze (Expression (N));
end Analyze_Free_Statement;
- ------------------------------------------
- -- Analyze_Record_Representation_Clause --
- ------------------------------------------
-
- procedure Analyze_Record_Representation_Clause (N : Node_Id) is
- Loc : constant Source_Ptr := Sloc (N);
- Ident : constant Node_Id := Identifier (N);
- Rectype : Entity_Id;
- Fent : Entity_Id;
- CC : Node_Id;
- Posit : Uint;
- Fbit : Uint;
- Lbit : Uint;
- Hbit : Uint := Uint_0;
- Comp : Entity_Id;
- Ocomp : Entity_Id;
- Biased : Boolean;
+ ---------------------------
+ -- Analyze_Freeze_Entity --
+ ---------------------------
- Max_Bit_So_Far : Uint;
- -- Records the maximum bit position so far. If all field positoins
- -- are monotonically increasing, then we can skip the circuit for
- -- checking for overlap, since no overlap is possible.
+ procedure Analyze_Freeze_Entity (N : Node_Id) is
+ E : constant Entity_Id := Entity (N);
- Overlap_Check_Required : Boolean;
- -- Used to keep track of whether or not an overlap check is required
+ begin
+ -- Remember that we are processing a freezing entity. Required to
+ -- ensure correct decoration of internal entities associated with
+ -- interfaces (see New_Overloaded_Entity).
+
+ Inside_Freezing_Actions := Inside_Freezing_Actions + 1;
+
+ -- For tagged types covering interfaces add internal entities that link
+ -- the primitives of the interfaces with the primitives that cover them.
+ -- Note: These entities were originally generated only when generating
+ -- code because their main purpose was to provide support to initialize
+ -- the secondary dispatch tables. They are now generated also when
+ -- compiling with no code generation to provide ASIS the relationship
+ -- between interface primitives and tagged type primitives. They are
+ -- also used to locate primitives covering interfaces when processing
+ -- generics (see Derive_Subprograms).
+
+ if Ada_Version >= Ada_05
+ and then Ekind (E) = E_Record_Type
+ and then Is_Tagged_Type (E)
+ and then not Is_Interface (E)
+ and then Has_Interfaces (E)
+ then
+ -- This would be a good common place to call the routine that checks
+ -- overriding of interface primitives (and thus factorize calls to
+ -- Check_Abstract_Overriding located at different contexts in the
+ -- compiler). However, this is not possible because it causes
+ -- spurious errors in case of late overriding.
- Ccount : Natural := 0;
- -- Number of component clauses in record rep clause
+ Add_Internal_Interface_Entities (E);
+ end if;
- begin
- Find_Type (Ident);
- Rectype := Entity (Ident);
+ -- Check CPP types
- if Rectype = Any_Type
- or else Rep_Item_Too_Early (Rectype, N)
+ if Ekind (E) = E_Record_Type
+ and then Is_CPP_Class (E)
+ and then Is_Tagged_Type (E)
+ and then Tagged_Type_Expansion
+ and then Expander_Active
+ then
+ if CPP_Num_Prims (E) = 0 then
+
+ -- If the CPP type has user defined components then it must import
+ -- primitives from C++. This is required because if the C++ class
+ -- has no primitives then the C++ compiler does not added the _tag
+ -- component to the type.
+
+ pragma Assert (Chars (First_Entity (E)) = Name_uTag);
+
+ if First_Entity (E) /= Last_Entity (E) then
+ Error_Msg_N
+ ("?'C'P'P type must import at least one primitive from C++",
+ E);
+ end if;
+ end if;
+
+ -- Check that all its primitives are abstract or imported from C++.
+ -- Check also availability of the C++ constructor.
+
+ declare
+ Has_Constructors : constant Boolean := Has_CPP_Constructors (E);
+ Elmt : Elmt_Id;
+ Error_Reported : Boolean := False;
+ Prim : Node_Id;
+
+ begin
+ Elmt := First_Elmt (Primitive_Operations (E));
+ while Present (Elmt) loop
+ Prim := Node (Elmt);
+
+ if Comes_From_Source (Prim) then
+ if Is_Abstract_Subprogram (Prim) then
+ null;
+
+ elsif not Is_Imported (Prim)
+ or else Convention (Prim) /= Convention_CPP
+ then
+ Error_Msg_N
+ ("?primitives of 'C'P'P types must be imported from C++"
+ & " or abstract", Prim);
+
+ elsif not Has_Constructors
+ and then not Error_Reported
+ then
+ Error_Msg_Name_1 := Chars (E);
+ Error_Msg_N
+ ("?'C'P'P constructor required for type %", Prim);
+ Error_Reported := True;
+ end if;
+ end if;
+
+ Next_Elmt (Elmt);
+ end loop;
+ end;
+ end if;
+
+ Inside_Freezing_Actions := Inside_Freezing_Actions - 1;
+ end Analyze_Freeze_Entity;
+
+ ------------------------------------------
+ -- Analyze_Record_Representation_Clause --
+ ------------------------------------------
+
+ -- Note: we check as much as we can here, but we can't do any checks
+ -- based on the position values (e.g. overlap checks) until freeze time
+ -- because especially in Ada 2005 (machine scalar mode), the processing
+ -- for non-standard bit order can substantially change the positions.
+ -- See procedure Check_Record_Representation_Clause (called from Freeze)
+ -- for the remainder of this processing.
+
+ procedure Analyze_Record_Representation_Clause (N : Node_Id) is
+ Ident : constant Node_Id := Identifier (N);
+ Biased : Boolean;
+ CC : Node_Id;
+ Comp : Entity_Id;
+ Fbit : Uint;
+ Hbit : Uint := Uint_0;
+ Lbit : Uint;
+ Ocomp : Entity_Id;
+ Posit : Uint;
+ Rectype : Entity_Id;
+
+ CR_Pragma : Node_Id := Empty;
+ -- Points to N_Pragma node if Complete_Representation pragma present
+
+ begin
+ if Ignore_Rep_Clauses then
+ return;
+ end if;
+
+ Find_Type (Ident);
+ Rectype := Entity (Ident);
+
+ if Rectype = Any_Type
+ or else Rep_Item_Too_Early (Rectype, N)
then
return;
else
("record type required, found}", Ident, First_Subtype (Rectype));
return;
- elsif Is_Unchecked_Union (Rectype) then
- Error_Msg_N
- ("record rep clause not allowed for Unchecked_Union", N);
-
elsif Scope (Rectype) /= Current_Scope then
Error_Msg_N ("type must be declared in this scope", N);
return;
Loc : constant Source_Ptr := Sloc (N);
M : constant Node_Id := Mod_Clause (N);
P : constant List_Id := Pragmas_Before (M);
- Mod_Val : Uint;
AtM_Nod : Node_Id;
+ Mod_Val : Uint;
+ pragma Warnings (Off, Mod_Val);
+
begin
+ Check_Restriction (No_Obsolescent_Features, Mod_Clause (N));
+
+ if Warn_On_Obsolescent_Feature then
+ Error_Msg_N
+ ("mod clause is an obsolescent feature (RM J.8)?", N);
+ Error_Msg_N
+ ("\use alignment attribute definition clause instead?", N);
+ end if;
+
if Present (P) then
Analyze_List (P);
end if;
- -- In Tree_Output mode, expansion is disabled, but we must
- -- convert the Mod clause into an alignment clause anyway, so
- -- that the back-end can compute and back-annotate properly the
- -- size and alignment of types that may include this record.
+ -- In ASIS_Mode mode, expansion is disabled, but we must convert
+ -- the Mod clause into an alignment clause anyway, so that the
+ -- back-end can compute and back-annotate properly the size and
+ -- alignment of types that may include this record.
+
+ -- This seems dubious, this destroys the source tree in a manner
+ -- not detectable by ASIS ???
if Operating_Mode = Check_Semantics
- and then Tree_Output
+ and then ASIS_Mode
then
AtM_Nod :=
Make_Attribute_Definition_Clause (Loc,
-- Get the alignment value to perform error checking
Mod_Val := Get_Alignment_Value (Expression (M));
-
end if;
end;
end if;
- -- Clear any existing component clauses for the type (this happens
- -- with derived types, where we are now overriding the original)
-
- Fent := First_Entity (Rectype);
+ -- For untagged types, clear any existing component clauses for the
+ -- type. If the type is derived, this is what allows us to override
+ -- a rep clause for the parent. For type extensions, the representation
+ -- of the inherited components is inherited, so we want to keep previous
+ -- component clauses for completeness.
- Comp := Fent;
- while Present (Comp) loop
- if Ekind (Comp) = E_Component
- or else Ekind (Comp) = E_Discriminant
- then
+ if not Is_Tagged_Type (Rectype) then
+ Comp := First_Component_Or_Discriminant (Rectype);
+ while Present (Comp) loop
Set_Component_Clause (Comp, Empty);
- end if;
-
- Next_Entity (Comp);
- end loop;
+ Next_Component_Or_Discriminant (Comp);
+ end loop;
+ end if;
-- All done if no component clauses
return;
end if;
- -- If a tag is present, then create a component clause that places
- -- it at the start of the record (otherwise gigi may place it after
- -- other fields that have rep clauses).
-
- if Nkind (Fent) = N_Defining_Identifier
- and then Chars (Fent) = Name_uTag
- then
- Set_Component_Bit_Offset (Fent, Uint_0);
- Set_Normalized_Position (Fent, Uint_0);
- Set_Normalized_First_Bit (Fent, Uint_0);
- Set_Normalized_Position_Max (Fent, Uint_0);
- Init_Esize (Fent, System_Address_Size);
-
- Set_Component_Clause (Fent,
- Make_Component_Clause (Loc,
- Component_Name =>
- Make_Identifier (Loc,
- Chars => Name_uTag),
-
- Position =>
- Make_Integer_Literal (Loc,
- Intval => Uint_0),
-
- First_Bit =>
- Make_Integer_Literal (Loc,
- Intval => Uint_0),
-
- Last_Bit =>
- Make_Integer_Literal (Loc,
- UI_From_Int (System_Address_Size))));
-
- Ccount := Ccount + 1;
- end if;
-
- Set_Has_Record_Rep_Clause (Rectype);
- Set_Has_Specified_Layout (Rectype);
-
- -- A representation like this applies to the base type as well
+ -- A representation like this applies to the base type
Set_Has_Record_Rep_Clause (Base_Type (Rectype));
Set_Has_Non_Standard_Rep (Base_Type (Rectype));
Set_Has_Specified_Layout (Base_Type (Rectype));
- Max_Bit_So_Far := Uint_Minus_1;
- Overlap_Check_Required := False;
-
-- Process the component clauses
while Present (CC) loop
- -- If pragma, just analyze it
+ -- Pragma
if Nkind (CC) = N_Pragma then
Analyze (CC);
+ -- The only pragma of interest is Complete_Representation
+
+ if Pragma_Name (CC) = Name_Complete_Representation then
+ CR_Pragma := CC;
+ end if;
+
-- Processing for real component clause
else
- Ccount := Ccount + 1;
Posit := Static_Integer (Position (CC));
Fbit := Static_Integer (First_Bit (CC));
Lbit := Static_Integer (Last_Bit (CC));
Error_Msg_N
("first bit cannot be negative", First_Bit (CC));
+ -- The Last_Bit specified in a component clause must not be
+ -- less than the First_Bit minus one (RM-13.5.1(10)).
+
+ elsif Lbit < Fbit - 1 then
+ Error_Msg_N
+ ("last bit cannot be less than first bit minus one",
+ Last_Bit (CC));
+
-- Values look OK, so find the corresponding record component
-- Even though the syntax allows an attribute reference for
-- implementation-defined components, GNAT does not allow the
-- tag to get an explicit position.
elsif Nkind (Component_Name (CC)) = N_Attribute_Reference then
-
if Attribute_Name (Component_Name (CC)) = Name_Tag then
Error_Msg_N ("position of tag cannot be specified", CC);
else
Error_Msg_N
("component clause is for non-existent field", CC);
- elsif Present (Component_Clause (Comp)) then
- Error_Msg_Sloc := Sloc (Component_Clause (Comp));
+ -- Ada 2012 (AI05-0026): Any name that denotes a
+ -- discriminant of an object of an unchecked union type
+ -- shall not occur within a record_representation_clause.
+
+ -- The general restriction of using record rep clauses on
+ -- Unchecked_Union types has now been lifted. Since it is
+ -- possible to introduce a record rep clause which mentions
+ -- the discriminant of an Unchecked_Union in non-Ada 2012
+ -- code, this check is applied to all versions of the
+ -- language.
+
+ elsif Ekind (Comp) = E_Discriminant
+ and then Is_Unchecked_Union (Rectype)
+ then
Error_Msg_N
- ("component clause previously given#", CC);
+ ("cannot reference discriminant of Unchecked_Union",
+ Component_Name (CC));
- else
- -- Update Fbit and Lbit to the actual bit number.
+ elsif Present (Component_Clause (Comp)) then
- Fbit := Fbit + UI_From_Int (SSU) * Posit;
- Lbit := Lbit + UI_From_Int (SSU) * Posit;
+ -- Diagnose duplicate rep clause, or check consistency
+ -- if this is an inherited component. In a double fault,
+ -- there may be a duplicate inconsistent clause for an
+ -- inherited component.
+
+ if Scope (Original_Record_Component (Comp)) = Rectype
+ or else Parent (Component_Clause (Comp)) = N
+ then
+ Error_Msg_Sloc := Sloc (Component_Clause (Comp));
+ Error_Msg_N ("component clause previously given#", CC);
- if Fbit <= Max_Bit_So_Far then
- Overlap_Check_Required := True;
else
- Max_Bit_So_Far := Lbit;
+ declare
+ Rep1 : constant Node_Id := Component_Clause (Comp);
+ begin
+ if Intval (Position (Rep1)) /=
+ Intval (Position (CC))
+ or else Intval (First_Bit (Rep1)) /=
+ Intval (First_Bit (CC))
+ or else Intval (Last_Bit (Rep1)) /=
+ Intval (Last_Bit (CC))
+ then
+ Error_Msg_N ("component clause inconsistent "
+ & "with representation of ancestor", CC);
+ elsif Warn_On_Redundant_Constructs then
+ Error_Msg_N ("?redundant component clause "
+ & "for inherited component!", CC);
+ end if;
+ end;
end if;
+ -- Normal case where this is the first component clause we
+ -- have seen for this entity, so set it up properly.
+
+ else
+ -- Make reference for field in record rep clause and set
+ -- appropriate entity field in the field identifier.
+
+ Generate_Reference
+ (Comp, Component_Name (CC), Set_Ref => False);
+ Set_Entity (Component_Name (CC), Comp);
+
+ -- Update Fbit and Lbit to the actual bit number
+
+ Fbit := Fbit + UI_From_Int (SSU) * Posit;
+ Lbit := Lbit + UI_From_Int (SSU) * Posit;
+
if Has_Size_Clause (Rectype)
and then Esize (Rectype) <= Lbit
then
Set_Normalized_First_Bit (Comp, Fbit mod SSU);
Set_Normalized_Position (Comp, Fbit / SSU);
- Set_Normalized_Position_Max
- (Fent, Normalized_Position (Fent));
-
- if Is_Tagged_Type (Rectype)
- and then Fbit < System_Address_Size
+ if Warn_On_Overridden_Size
+ and then Has_Size_Clause (Etype (Comp))
+ and then RM_Size (Etype (Comp)) /= Esize (Comp)
then
Error_Msg_NE
- ("component overlaps tag field of&",
- CC, Rectype);
- end if;
-
- -- Test for large object that is not on a byte
- -- boundary, defined as a large packed array not
- -- represented by a modular type, or an object for
- -- which a size of greater than 64 bits is specified.
-
- if Fbit mod SSU /= 0 then
- if (Is_Packed_Array_Type (Etype (Comp))
- and then Is_Array_Type
- (Packed_Array_Type (Etype (Comp))))
- or else Esize (Etype (Comp)) > 64
- then
- Error_Msg_N
- ("large component must be on byte boundary",
- First_Bit (CC));
- end if;
+ ("?component size overrides size clause for&",
+ Component_Name (CC), Etype (Comp));
end if;
- -- This information is also set in the
- -- corresponding component of the base type,
- -- found by accessing the Original_Record_Component
- -- link if it is present.
+ -- This information is also set in the corresponding
+ -- component of the base type, found by accessing the
+ -- Original_Record_Component link if it is present.
Ocomp := Original_Record_Component (Comp);
Esize (Comp),
Biased);
- Set_Has_Biased_Representation (Comp, Biased);
+ Set_Biased
+ (Comp, First_Node (CC), "component clause", Biased);
if Present (Ocomp) then
Set_Component_Clause (Ocomp, CC);
Set_Normalized_Position_Max
(Ocomp, Normalized_Position (Ocomp));
+ -- Note: we don't use Set_Biased here, because we
+ -- already gave a warning above if needed, and we
+ -- would get a duplicate for the same name here.
+
Set_Has_Biased_Representation
(Ocomp, Has_Biased_Representation (Comp));
end if;
Next (CC);
end loop;
- -- Now that we have processed all the component clauses, check for
- -- overlap. We have to leave this till last, since the components
- -- can appear in any arbitrary order in the representation clause.
-
- -- We do not need this check if all specified ranges were monotonic,
- -- as recorded by Overlap_Check_Required being False at this stage.
-
- -- This first section checks if there are any overlapping entries
- -- at all. It does this by sorting all entries and then seeing if
- -- there are any overlaps. If there are none, then that is decisive,
- -- but if there are overlaps, they may still be OK (they may result
- -- from fields in different variants).
+ -- Check missing components if Complete_Representation pragma appeared
- if Overlap_Check_Required then
- Overlap_Check1 : declare
+ if Present (CR_Pragma) then
+ Comp := First_Component_Or_Discriminant (Rectype);
+ while Present (Comp) loop
+ if No (Component_Clause (Comp)) then
+ Error_Msg_NE
+ ("missing component clause for &", CR_Pragma, Comp);
+ end if;
- OC_Fbit : array (0 .. Ccount) of Uint;
- -- First-bit values for component clauses, the value is the
- -- offset of the first bit of the field from start of record.
- -- The zero entry is for use in sorting.
+ Next_Component_Or_Discriminant (Comp);
+ end loop;
- OC_Lbit : array (0 .. Ccount) of Uint;
- -- Last-bit values for component clauses, the value is the
- -- offset of the last bit of the field from start of record.
- -- The zero entry is for use in sorting.
+ -- If no Complete_Representation pragma, warn if missing components
- OC_Count : Natural := 0;
- -- Count of entries in OC_Fbit and OC_Lbit
+ elsif Warn_On_Unrepped_Components then
+ declare
+ Num_Repped_Components : Nat := 0;
+ Num_Unrepped_Components : Nat := 0;
- function OC_Lt (Op1, Op2 : Natural) return Boolean;
- -- Compare routine for Sort (See GNAT.Heap_Sort_A)
+ begin
+ -- First count number of repped and unrepped components
- procedure OC_Move (From : Natural; To : Natural);
- -- Move routine for Sort (see GNAT.Heap_Sort_A)
+ Comp := First_Component_Or_Discriminant (Rectype);
+ while Present (Comp) loop
+ if Present (Component_Clause (Comp)) then
+ Num_Repped_Components := Num_Repped_Components + 1;
+ else
+ Num_Unrepped_Components := Num_Unrepped_Components + 1;
+ end if;
- function OC_Lt (Op1, Op2 : Natural) return Boolean is
- begin
- return OC_Fbit (Op1) < OC_Fbit (Op2);
- end OC_Lt;
+ Next_Component_Or_Discriminant (Comp);
+ end loop;
- procedure OC_Move (From : Natural; To : Natural) is
- begin
- OC_Fbit (To) := OC_Fbit (From);
- OC_Lbit (To) := OC_Lbit (From);
- end OC_Move;
+ -- We are only interested in the case where there is at least one
+ -- unrepped component, and at least half the components have rep
+ -- clauses. We figure that if less than half have them, then the
+ -- partial rep clause is really intentional. If the component
+ -- type has no underlying type set at this point (as for a generic
+ -- formal type), we don't know enough to give a warning on the
+ -- component.
- begin
- CC := First (Component_Clauses (N));
- while Present (CC) loop
- if Nkind (CC) /= N_Pragma then
- Posit := Static_Integer (Position (CC));
- Fbit := Static_Integer (First_Bit (CC));
- Lbit := Static_Integer (Last_Bit (CC));
-
- if Posit /= No_Uint
- and then Fbit /= No_Uint
- and then Lbit /= No_Uint
+ if Num_Unrepped_Components > 0
+ and then Num_Unrepped_Components < Num_Repped_Components
+ then
+ Comp := First_Component_Or_Discriminant (Rectype);
+ while Present (Comp) loop
+ if No (Component_Clause (Comp))
+ and then Comes_From_Source (Comp)
+ and then Present (Underlying_Type (Etype (Comp)))
+ and then (Is_Scalar_Type (Underlying_Type (Etype (Comp)))
+ or else Size_Known_At_Compile_Time
+ (Underlying_Type (Etype (Comp))))
+ and then not Has_Warnings_Off (Rectype)
then
- OC_Count := OC_Count + 1;
- Posit := Posit * SSU;
- OC_Fbit (OC_Count) := Fbit + Posit;
- OC_Lbit (OC_Count) := Lbit + Posit;
+ Error_Msg_Sloc := Sloc (Comp);
+ Error_Msg_NE
+ ("?no component clause given for & declared #",
+ N, Comp);
end if;
- end if;
- Next (CC);
- end loop;
-
- Sort
- (OC_Count,
- OC_Move'Unrestricted_Access,
- OC_Lt'Unrestricted_Access);
-
- Overlap_Check_Required := False;
- for J in 1 .. OC_Count - 1 loop
- if OC_Lbit (J) >= OC_Fbit (J + 1) then
- Overlap_Check_Required := True;
- exit;
- end if;
- end loop;
- end Overlap_Check1;
+ Next_Component_Or_Discriminant (Comp);
+ end loop;
+ end if;
+ end;
end if;
+ end Analyze_Record_Representation_Clause;
- -- If Overlap_Check_Required is still True, then we have to do
- -- the full scale overlap check, since we have at least two fields
- -- that do overlap, and we need to know if that is OK since they
- -- are in the same variant, or whether we have a definite problem
+ -----------------------------------
+ -- Check_Constant_Address_Clause --
+ -----------------------------------
- if Overlap_Check_Required then
- Overlap_Check2 : declare
- C1_Ent, C2_Ent : Entity_Id;
- -- Entities of components being checked for overlap
+ procedure Check_Constant_Address_Clause
+ (Expr : Node_Id;
+ U_Ent : Entity_Id)
+ is
+ procedure Check_At_Constant_Address (Nod : Node_Id);
+ -- Checks that the given node N represents a name whose 'Address is
+ -- constant (in the same sense as OK_Constant_Address_Clause, i.e. the
+ -- address value is the same at the point of declaration of U_Ent and at
+ -- the time of elaboration of the address clause.
- Clist : Node_Id;
- -- Component_List node whose Component_Items are being checked
+ procedure Check_Expr_Constants (Nod : Node_Id);
+ -- Checks that Nod meets the requirements for a constant address clause
+ -- in the sense of the enclosing procedure.
- Citem : Node_Id;
- -- Component declaration for component being checked
+ procedure Check_List_Constants (Lst : List_Id);
+ -- Check that all elements of list Lst meet the requirements for a
+ -- constant address clause in the sense of the enclosing procedure.
- begin
- C1_Ent := First_Entity (Base_Type (Rectype));
+ -------------------------------
+ -- Check_At_Constant_Address --
+ -------------------------------
- -- Loop through all components in record. For each component check
- -- for overlap with any of the preceding elements on the component
- -- list containing the component, and also, if the component is in
- -- a variant, check against components outside the case structure.
- -- This latter test is repeated recursively up the variant tree.
+ procedure Check_At_Constant_Address (Nod : Node_Id) is
+ begin
+ if Is_Entity_Name (Nod) then
+ if Present (Address_Clause (Entity ((Nod)))) then
+ Error_Msg_NE
+ ("invalid address clause for initialized object &!",
+ Nod, U_Ent);
+ Error_Msg_NE
+ ("address for& cannot" &
+ " depend on another address clause! (RM 13.1(22))!",
+ Nod, U_Ent);
- Main_Component_Loop : while Present (C1_Ent) loop
- if Ekind (C1_Ent) /= E_Component
- and then Ekind (C1_Ent) /= E_Discriminant
- then
- goto Continue_Main_Component_Loop;
- end if;
+ elsif In_Same_Source_Unit (Entity (Nod), U_Ent)
+ and then Sloc (U_Ent) < Sloc (Entity (Nod))
+ then
+ Error_Msg_NE
+ ("invalid address clause for initialized object &!",
+ Nod, U_Ent);
+ Error_Msg_Node_2 := U_Ent;
+ Error_Msg_NE
+ ("\& must be defined before & (RM 13.1(22))!",
+ Nod, Entity (Nod));
+ end if;
- -- Skip overlap check if entity has no declaration node. This
- -- happens with discriminants in constrained derived types.
- -- Probably we are missing some checks as a result, but that
- -- does not seem terribly serious ???
+ elsif Nkind (Nod) = N_Selected_Component then
+ declare
+ T : constant Entity_Id := Etype (Prefix (Nod));
+
+ begin
+ if (Is_Record_Type (T)
+ and then Has_Discriminants (T))
+ or else
+ (Is_Access_Type (T)
+ and then Is_Record_Type (Designated_Type (T))
+ and then Has_Discriminants (Designated_Type (T)))
+ then
+ Error_Msg_NE
+ ("invalid address clause for initialized object &!",
+ Nod, U_Ent);
+ Error_Msg_N
+ ("\address cannot depend on component" &
+ " of discriminated record (RM 13.1(22))!",
+ Nod);
+ else
+ Check_At_Constant_Address (Prefix (Nod));
+ end if;
+ end;
+
+ elsif Nkind (Nod) = N_Indexed_Component then
+ Check_At_Constant_Address (Prefix (Nod));
+ Check_List_Constants (Expressions (Nod));
+
+ else
+ Check_Expr_Constants (Nod);
+ end if;
+ end Check_At_Constant_Address;
+
+ --------------------------
+ -- Check_Expr_Constants --
+ --------------------------
+
+ procedure Check_Expr_Constants (Nod : Node_Id) is
+ Loc_U_Ent : constant Source_Ptr := Sloc (U_Ent);
+ Ent : Entity_Id := Empty;
+
+ begin
+ if Nkind (Nod) in N_Has_Etype
+ and then Etype (Nod) = Any_Type
+ then
+ return;
+ end if;
+
+ case Nkind (Nod) is
+ when N_Empty | N_Error =>
+ return;
+
+ when N_Identifier | N_Expanded_Name =>
+ Ent := Entity (Nod);
+
+ -- We need to look at the original node if it is different
+ -- from the node, since we may have rewritten things and
+ -- substituted an identifier representing the rewrite.
+
+ if Original_Node (Nod) /= Nod then
+ Check_Expr_Constants (Original_Node (Nod));
+
+ -- If the node is an object declaration without initial
+ -- value, some code has been expanded, and the expression
+ -- is not constant, even if the constituents might be
+ -- acceptable, as in A'Address + offset.
+
+ if Ekind (Ent) = E_Variable
+ and then
+ Nkind (Declaration_Node (Ent)) = N_Object_Declaration
+ and then
+ No (Expression (Declaration_Node (Ent)))
+ then
+ Error_Msg_NE
+ ("invalid address clause for initialized object &!",
+ Nod, U_Ent);
+
+ -- If entity is constant, it may be the result of expanding
+ -- a check. We must verify that its declaration appears
+ -- before the object in question, else we also reject the
+ -- address clause.
+
+ elsif Ekind (Ent) = E_Constant
+ and then In_Same_Source_Unit (Ent, U_Ent)
+ and then Sloc (Ent) > Loc_U_Ent
+ then
+ Error_Msg_NE
+ ("invalid address clause for initialized object &!",
+ Nod, U_Ent);
+ end if;
+
+ return;
+ end if;
+
+ -- Otherwise look at the identifier and see if it is OK
+
+ if Ekind_In (Ent, E_Named_Integer, E_Named_Real)
+ or else Is_Type (Ent)
+ then
+ return;
+
+ elsif
+ Ekind (Ent) = E_Constant
+ or else
+ Ekind (Ent) = E_In_Parameter
+ then
+ -- This is the case where we must have Ent defined before
+ -- U_Ent. Clearly if they are in different units this
+ -- requirement is met since the unit containing Ent is
+ -- already processed.
+
+ if not In_Same_Source_Unit (Ent, U_Ent) then
+ return;
+
+ -- Otherwise location of Ent must be before the location
+ -- of U_Ent, that's what prior defined means.
+
+ elsif Sloc (Ent) < Loc_U_Ent then
+ return;
+
+ else
+ Error_Msg_NE
+ ("invalid address clause for initialized object &!",
+ Nod, U_Ent);
+ Error_Msg_Node_2 := U_Ent;
+ Error_Msg_NE
+ ("\& must be defined before & (RM 13.1(22))!",
+ Nod, Ent);
+ end if;
+
+ elsif Nkind (Original_Node (Nod)) = N_Function_Call then
+ Check_Expr_Constants (Original_Node (Nod));
+
+ else
+ Error_Msg_NE
+ ("invalid address clause for initialized object &!",
+ Nod, U_Ent);
+
+ if Comes_From_Source (Ent) then
+ Error_Msg_NE
+ ("\reference to variable& not allowed"
+ & " (RM 13.1(22))!", Nod, Ent);
+ else
+ Error_Msg_N
+ ("non-static expression not allowed"
+ & " (RM 13.1(22))!", Nod);
+ end if;
+ end if;
+
+ when N_Integer_Literal =>
+
+ -- If this is a rewritten unchecked conversion, in a system
+ -- where Address is an integer type, always use the base type
+ -- for a literal value. This is user-friendly and prevents
+ -- order-of-elaboration issues with instances of unchecked
+ -- conversion.
+
+ if Nkind (Original_Node (Nod)) = N_Function_Call then
+ Set_Etype (Nod, Base_Type (Etype (Nod)));
+ end if;
+
+ when N_Real_Literal |
+ N_String_Literal |
+ N_Character_Literal =>
+ return;
+
+ when N_Range =>
+ Check_Expr_Constants (Low_Bound (Nod));
+ Check_Expr_Constants (High_Bound (Nod));
+
+ when N_Explicit_Dereference =>
+ Check_Expr_Constants (Prefix (Nod));
+
+ when N_Indexed_Component =>
+ Check_Expr_Constants (Prefix (Nod));
+ Check_List_Constants (Expressions (Nod));
+
+ when N_Slice =>
+ Check_Expr_Constants (Prefix (Nod));
+ Check_Expr_Constants (Discrete_Range (Nod));
+
+ when N_Selected_Component =>
+ Check_Expr_Constants (Prefix (Nod));
+
+ when N_Attribute_Reference =>
+ if Attribute_Name (Nod) = Name_Address
+ or else
+ Attribute_Name (Nod) = Name_Access
+ or else
+ Attribute_Name (Nod) = Name_Unchecked_Access
+ or else
+ Attribute_Name (Nod) = Name_Unrestricted_Access
+ then
+ Check_At_Constant_Address (Prefix (Nod));
+
+ else
+ Check_Expr_Constants (Prefix (Nod));
+ Check_List_Constants (Expressions (Nod));
+ end if;
+
+ when N_Aggregate =>
+ Check_List_Constants (Component_Associations (Nod));
+ Check_List_Constants (Expressions (Nod));
+
+ when N_Component_Association =>
+ Check_Expr_Constants (Expression (Nod));
+
+ when N_Extension_Aggregate =>
+ Check_Expr_Constants (Ancestor_Part (Nod));
+ Check_List_Constants (Component_Associations (Nod));
+ Check_List_Constants (Expressions (Nod));
+
+ when N_Null =>
+ return;
+
+ when N_Binary_Op | N_Short_Circuit | N_Membership_Test =>
+ Check_Expr_Constants (Left_Opnd (Nod));
+ Check_Expr_Constants (Right_Opnd (Nod));
+
+ when N_Unary_Op =>
+ Check_Expr_Constants (Right_Opnd (Nod));
+
+ when N_Type_Conversion |
+ N_Qualified_Expression |
+ N_Allocator =>
+ Check_Expr_Constants (Expression (Nod));
+
+ when N_Unchecked_Type_Conversion =>
+ Check_Expr_Constants (Expression (Nod));
+
+ -- If this is a rewritten unchecked conversion, subtypes in
+ -- this node are those created within the instance. To avoid
+ -- order of elaboration issues, replace them with their base
+ -- types. Note that address clauses can cause order of
+ -- elaboration problems because they are elaborated by the
+ -- back-end at the point of definition, and may mention
+ -- entities declared in between (as long as everything is
+ -- static). It is user-friendly to allow unchecked conversions
+ -- in this context.
+
+ if Nkind (Original_Node (Nod)) = N_Function_Call then
+ Set_Etype (Expression (Nod),
+ Base_Type (Etype (Expression (Nod))));
+ Set_Etype (Nod, Base_Type (Etype (Nod)));
+ end if;
+
+ when N_Function_Call =>
+ if not Is_Pure (Entity (Name (Nod))) then
+ Error_Msg_NE
+ ("invalid address clause for initialized object &!",
+ Nod, U_Ent);
+
+ Error_Msg_NE
+ ("\function & is not pure (RM 13.1(22))!",
+ Nod, Entity (Name (Nod)));
+
+ else
+ Check_List_Constants (Parameter_Associations (Nod));
+ end if;
+
+ when N_Parameter_Association =>
+ Check_Expr_Constants (Explicit_Actual_Parameter (Nod));
+
+ when others =>
+ Error_Msg_NE
+ ("invalid address clause for initialized object &!",
+ Nod, U_Ent);
+ Error_Msg_NE
+ ("\must be constant defined before& (RM 13.1(22))!",
+ Nod, U_Ent);
+ end case;
+ end Check_Expr_Constants;
+
+ --------------------------
+ -- Check_List_Constants --
+ --------------------------
+
+ procedure Check_List_Constants (Lst : List_Id) is
+ Nod1 : Node_Id;
+
+ begin
+ if Present (Lst) then
+ Nod1 := First (Lst);
+ while Present (Nod1) loop
+ Check_Expr_Constants (Nod1);
+ Next (Nod1);
+ end loop;
+ end if;
+ end Check_List_Constants;
+
+ -- Start of processing for Check_Constant_Address_Clause
+
+ begin
+ -- If rep_clauses are to be ignored, no need for legality checks. In
+ -- particular, no need to pester user about rep clauses that violate
+ -- the rule on constant addresses, given that these clauses will be
+ -- removed by Freeze before they reach the back end.
+
+ if not Ignore_Rep_Clauses then
+ Check_Expr_Constants (Expr);
+ end if;
+ end Check_Constant_Address_Clause;
+
+ ----------------------------------------
+ -- Check_Record_Representation_Clause --
+ ----------------------------------------
+
+ procedure Check_Record_Representation_Clause (N : Node_Id) is
+ Loc : constant Source_Ptr := Sloc (N);
+ Ident : constant Node_Id := Identifier (N);
+ Rectype : Entity_Id;
+ Fent : Entity_Id;
+ CC : Node_Id;
+ Fbit : Uint;
+ Lbit : Uint;
+ Hbit : Uint := Uint_0;
+ Comp : Entity_Id;
+ Pcomp : Entity_Id;
+
+ Max_Bit_So_Far : Uint;
+ -- Records the maximum bit position so far. If all field positions
+ -- are monotonically increasing, then we can skip the circuit for
+ -- checking for overlap, since no overlap is possible.
+
+ Tagged_Parent : Entity_Id := Empty;
+ -- This is set in the case of a derived tagged type for which we have
+ -- Is_Fully_Repped_Tagged_Type True (indicating that all components are
+ -- positioned by record representation clauses). In this case we must
+ -- check for overlap between components of this tagged type, and the
+ -- components of its parent. Tagged_Parent will point to this parent
+ -- type. For all other cases Tagged_Parent is left set to Empty.
+
+ Parent_Last_Bit : Uint;
+ -- Relevant only if Tagged_Parent is set, Parent_Last_Bit indicates the
+ -- last bit position for any field in the parent type. We only need to
+ -- check overlap for fields starting below this point.
+
+ Overlap_Check_Required : Boolean;
+ -- Used to keep track of whether or not an overlap check is required
+
+ Overlap_Detected : Boolean := False;
+ -- Set True if an overlap is detected
+
+ Ccount : Natural := 0;
+ -- Number of component clauses in record rep clause
+
+ procedure Check_Component_Overlap (C1_Ent, C2_Ent : Entity_Id);
+ -- Given two entities for record components or discriminants, checks
+ -- if they have overlapping component clauses and issues errors if so.
+
+ procedure Find_Component;
+ -- Finds component entity corresponding to current component clause (in
+ -- CC), and sets Comp to the entity, and Fbit/Lbit to the zero origin
+ -- start/stop bits for the field. If there is no matching component or
+ -- if the matching component does not have a component clause, then
+ -- that's an error and Comp is set to Empty, but no error message is
+ -- issued, since the message was already given. Comp is also set to
+ -- Empty if the current "component clause" is in fact a pragma.
+
+ -----------------------------
+ -- Check_Component_Overlap --
+ -----------------------------
+
+ procedure Check_Component_Overlap (C1_Ent, C2_Ent : Entity_Id) is
+ CC1 : constant Node_Id := Component_Clause (C1_Ent);
+ CC2 : constant Node_Id := Component_Clause (C2_Ent);
+
+ begin
+ if Present (CC1) and then Present (CC2) then
+
+ -- Exclude odd case where we have two tag fields in the same
+ -- record, both at location zero. This seems a bit strange, but
+ -- it seems to happen in some circumstances, perhaps on an error.
+
+ if Chars (C1_Ent) = Name_uTag
+ and then
+ Chars (C2_Ent) = Name_uTag
+ then
+ return;
+ end if;
+
+ -- Here we check if the two fields overlap
+
+ declare
+ S1 : constant Uint := Component_Bit_Offset (C1_Ent);
+ S2 : constant Uint := Component_Bit_Offset (C2_Ent);
+ E1 : constant Uint := S1 + Esize (C1_Ent);
+ E2 : constant Uint := S2 + Esize (C2_Ent);
+
+ begin
+ if E2 <= S1 or else E1 <= S2 then
+ null;
+ else
+ Error_Msg_Node_2 := Component_Name (CC2);
+ Error_Msg_Sloc := Sloc (Error_Msg_Node_2);
+ Error_Msg_Node_1 := Component_Name (CC1);
+ Error_Msg_N
+ ("component& overlaps & #", Component_Name (CC1));
+ Overlap_Detected := True;
+ end if;
+ end;
+ end if;
+ end Check_Component_Overlap;
+
+ --------------------
+ -- Find_Component --
+ --------------------
+
+ procedure Find_Component is
+
+ procedure Search_Component (R : Entity_Id);
+ -- Search components of R for a match. If found, Comp is set.
+
+ ----------------------
+ -- Search_Component --
+ ----------------------
+
+ procedure Search_Component (R : Entity_Id) is
+ begin
+ Comp := First_Component_Or_Discriminant (R);
+ while Present (Comp) loop
+
+ -- Ignore error of attribute name for component name (we
+ -- already gave an error message for this, so no need to
+ -- complain here)
+
+ if Nkind (Component_Name (CC)) = N_Attribute_Reference then
+ null;
+ else
+ exit when Chars (Comp) = Chars (Component_Name (CC));
+ end if;
+
+ Next_Component_Or_Discriminant (Comp);
+ end loop;
+ end Search_Component;
+
+ -- Start of processing for Find_Component
+
+ begin
+ -- Return with Comp set to Empty if we have a pragma
+
+ if Nkind (CC) = N_Pragma then
+ Comp := Empty;
+ return;
+ end if;
+
+ -- Search current record for matching component
+
+ Search_Component (Rectype);
+
+ -- If not found, maybe component of base type that is absent from
+ -- statically constrained first subtype.
+
+ if No (Comp) then
+ Search_Component (Base_Type (Rectype));
+ end if;
+
+ -- If no component, or the component does not reference the component
+ -- clause in question, then there was some previous error for which
+ -- we already gave a message, so just return with Comp Empty.
+
+ if No (Comp)
+ or else Component_Clause (Comp) /= CC
+ then
+ Comp := Empty;
+
+ -- Normal case where we have a component clause
+
+ else
+ Fbit := Component_Bit_Offset (Comp);
+ Lbit := Fbit + Esize (Comp) - 1;
+ end if;
+ end Find_Component;
+
+ -- Start of processing for Check_Record_Representation_Clause
+
+ begin
+ Find_Type (Ident);
+ Rectype := Entity (Ident);
+
+ if Rectype = Any_Type then
+ return;
+ else
+ Rectype := Underlying_Type (Rectype);
+ end if;
+
+ -- See if we have a fully repped derived tagged type
+
+ declare
+ PS : constant Entity_Id := Parent_Subtype (Rectype);
+
+ begin
+ if Present (PS) and then Is_Fully_Repped_Tagged_Type (PS) then
+ Tagged_Parent := PS;
+
+ -- Find maximum bit of any component of the parent type
+
+ Parent_Last_Bit := UI_From_Int (System_Address_Size - 1);
+ Pcomp := First_Entity (Tagged_Parent);
+ while Present (Pcomp) loop
+ if Ekind_In (Pcomp, E_Discriminant, E_Component) then
+ if Component_Bit_Offset (Pcomp) /= No_Uint
+ and then Known_Static_Esize (Pcomp)
+ then
+ Parent_Last_Bit :=
+ UI_Max
+ (Parent_Last_Bit,
+ Component_Bit_Offset (Pcomp) + Esize (Pcomp) - 1);
+ end if;
+
+ Next_Entity (Pcomp);
+ end if;
+ end loop;
+ end if;
+ end;
+
+ -- All done if no component clauses
+
+ CC := First (Component_Clauses (N));
+
+ if No (CC) then
+ return;
+ end if;
+
+ -- If a tag is present, then create a component clause that places it
+ -- at the start of the record (otherwise gigi may place it after other
+ -- fields that have rep clauses).
+
+ Fent := First_Entity (Rectype);
+
+ if Nkind (Fent) = N_Defining_Identifier
+ and then Chars (Fent) = Name_uTag
+ then
+ Set_Component_Bit_Offset (Fent, Uint_0);
+ Set_Normalized_Position (Fent, Uint_0);
+ Set_Normalized_First_Bit (Fent, Uint_0);
+ Set_Normalized_Position_Max (Fent, Uint_0);
+ Init_Esize (Fent, System_Address_Size);
+
+ Set_Component_Clause (Fent,
+ Make_Component_Clause (Loc,
+ Component_Name =>
+ Make_Identifier (Loc,
+ Chars => Name_uTag),
+
+ Position =>
+ Make_Integer_Literal (Loc,
+ Intval => Uint_0),
+
+ First_Bit =>
+ Make_Integer_Literal (Loc,
+ Intval => Uint_0),
+
+ Last_Bit =>
+ Make_Integer_Literal (Loc,
+ UI_From_Int (System_Address_Size))));
+
+ Ccount := Ccount + 1;
+ end if;
+
+ Max_Bit_So_Far := Uint_Minus_1;
+ Overlap_Check_Required := False;
+
+ -- Process the component clauses
+
+ while Present (CC) loop
+ Find_Component;
+
+ if Present (Comp) then
+ Ccount := Ccount + 1;
+
+ -- We need a full overlap check if record positions non-monotonic
+
+ if Fbit <= Max_Bit_So_Far then
+ Overlap_Check_Required := True;
+ end if;
+
+ Max_Bit_So_Far := Lbit;
+
+ -- Check bit position out of range of specified size
+
+ if Has_Size_Clause (Rectype)
+ and then Esize (Rectype) <= Lbit
+ then
+ Error_Msg_N
+ ("bit number out of range of specified size",
+ Last_Bit (CC));
+
+ -- Check for overlap with tag field
+
+ else
+ if Is_Tagged_Type (Rectype)
+ and then Fbit < System_Address_Size
+ then
+ Error_Msg_NE
+ ("component overlaps tag field of&",
+ Component_Name (CC), Rectype);
+ Overlap_Detected := True;
+ end if;
+
+ if Hbit < Lbit then
+ Hbit := Lbit;
+ end if;
+ end if;
+
+ -- Check parent overlap if component might overlap parent field
+
+ if Present (Tagged_Parent)
+ and then Fbit <= Parent_Last_Bit
+ then
+ Pcomp := First_Component_Or_Discriminant (Tagged_Parent);
+ while Present (Pcomp) loop
+ if not Is_Tag (Pcomp)
+ and then Chars (Pcomp) /= Name_uParent
+ then
+ Check_Component_Overlap (Comp, Pcomp);
+ end if;
+
+ Next_Component_Or_Discriminant (Pcomp);
+ end loop;
+ end if;
+ end if;
+
+ Next (CC);
+ end loop;
+
+ -- Now that we have processed all the component clauses, check for
+ -- overlap. We have to leave this till last, since the components can
+ -- appear in any arbitrary order in the representation clause.
+
+ -- We do not need this check if all specified ranges were monotonic,
+ -- as recorded by Overlap_Check_Required being False at this stage.
+
+ -- This first section checks if there are any overlapping entries at
+ -- all. It does this by sorting all entries and then seeing if there are
+ -- any overlaps. If there are none, then that is decisive, but if there
+ -- are overlaps, they may still be OK (they may result from fields in
+ -- different variants).
+
+ if Overlap_Check_Required then
+ Overlap_Check1 : declare
+
+ OC_Fbit : array (0 .. Ccount) of Uint;
+ -- First-bit values for component clauses, the value is the offset
+ -- of the first bit of the field from start of record. The zero
+ -- entry is for use in sorting.
+
+ OC_Lbit : array (0 .. Ccount) of Uint;
+ -- Last-bit values for component clauses, the value is the offset
+ -- of the last bit of the field from start of record. The zero
+ -- entry is for use in sorting.
+
+ OC_Count : Natural := 0;
+ -- Count of entries in OC_Fbit and OC_Lbit
+
+ function OC_Lt (Op1, Op2 : Natural) return Boolean;
+ -- Compare routine for Sort
+
+ procedure OC_Move (From : Natural; To : Natural);
+ -- Move routine for Sort
+
+ package Sorting is new GNAT.Heap_Sort_G (OC_Move, OC_Lt);
+
+ -----------
+ -- OC_Lt --
+ -----------
+
+ function OC_Lt (Op1, Op2 : Natural) return Boolean is
+ begin
+ return OC_Fbit (Op1) < OC_Fbit (Op2);
+ end OC_Lt;
+
+ -------------
+ -- OC_Move --
+ -------------
+
+ procedure OC_Move (From : Natural; To : Natural) is
+ begin
+ OC_Fbit (To) := OC_Fbit (From);
+ OC_Lbit (To) := OC_Lbit (From);
+ end OC_Move;
+
+ -- Start of processing for Overlap_Check
+
+ begin
+ CC := First (Component_Clauses (N));
+ while Present (CC) loop
+
+ -- Exclude component clause already marked in error
+
+ if not Error_Posted (CC) then
+ Find_Component;
+
+ if Present (Comp) then
+ OC_Count := OC_Count + 1;
+ OC_Fbit (OC_Count) := Fbit;
+ OC_Lbit (OC_Count) := Lbit;
+ end if;
+ end if;
+
+ Next (CC);
+ end loop;
+
+ Sorting.Sort (OC_Count);
+
+ Overlap_Check_Required := False;
+ for J in 1 .. OC_Count - 1 loop
+ if OC_Lbit (J) >= OC_Fbit (J + 1) then
+ Overlap_Check_Required := True;
+ exit;
+ end if;
+ end loop;
+ end Overlap_Check1;
+ end if;
+
+ -- If Overlap_Check_Required is still True, then we have to do the full
+ -- scale overlap check, since we have at least two fields that do
+ -- overlap, and we need to know if that is OK since they are in
+ -- different variant, or whether we have a definite problem.
+
+ if Overlap_Check_Required then
+ Overlap_Check2 : declare
+ C1_Ent, C2_Ent : Entity_Id;
+ -- Entities of components being checked for overlap
+
+ Clist : Node_Id;
+ -- Component_List node whose Component_Items are being checked
+
+ Citem : Node_Id;
+ -- Component declaration for component being checked
+
+ begin
+ C1_Ent := First_Entity (Base_Type (Rectype));
+
+ -- Loop through all components in record. For each component check
+ -- for overlap with any of the preceding elements on the component
+ -- list containing the component and also, if the component is in
+ -- a variant, check against components outside the case structure.
+ -- This latter test is repeated recursively up the variant tree.
+
+ Main_Component_Loop : while Present (C1_Ent) loop
+ if not Ekind_In (C1_Ent, E_Component, E_Discriminant) then
+ goto Continue_Main_Component_Loop;
+ end if;
+
+ -- Skip overlap check if entity has no declaration node. This
+ -- happens with discriminants in constrained derived types.
+ -- Possibly we are missing some checks as a result, but that
+ -- does not seem terribly serious.
if No (Declaration_Node (C1_Ent)) then
goto Continue_Main_Component_Loop;
Component_List_Loop : loop
-- If derived type definition, go to full declaration
- -- If at outer level, check discriminants if there are any
+ -- If at outer level, check discriminants if there are any.
if Nkind (Clist) = N_Derived_Type_Definition then
Clist := Parent (Clist);
-- Outer level of record definition, check discriminants
- if Nkind (Clist) = N_Full_Type_Declaration
- or else Nkind (Clist) = N_Private_Type_Declaration
+ if Nkind_In (Clist, N_Full_Type_Declaration,
+ N_Private_Type_Declaration)
then
if Has_Discriminants (Defining_Identifier (Clist)) then
C2_Ent :=
First_Discriminant (Defining_Identifier (Clist));
-
while Present (C2_Ent) loop
exit when C1_Ent = C2_Ent;
Check_Component_Overlap (C1_Ent, C2_Ent);
end loop;
end if;
- -- Record extension case
+ -- Record extension case
elsif Nkind (Clist) = N_Derived_Type_Definition then
Clist := Empty;
- -- Otherwise check one component list
+ -- Otherwise check one component list
else
Citem := First (Component_Items (Clist));
-
while Present (Citem) loop
if Nkind (Citem) = N_Component_Declaration then
C2_Ent := Defining_Identifier (Citem);
-- be a variant, in which case its parent is a variant part,
-- and the parent of the variant part is a component list
-- whose components must all be checked against the current
- -- component for overlap.
+ -- component for overlap).
if Nkind (Parent (Clist)) = N_Variant then
Clist := Parent (Parent (Parent (Clist)));
- -- Check for possible discriminant part in record, this is
- -- treated essentially as another level in the recursion.
- -- For this case we have the parent of the component list
- -- is the record definition, and its parent is the full
- -- type declaration which contains the discriminant
- -- specifications.
+ -- Check for possible discriminant part in record, this
+ -- is treated essentially as another level in the
+ -- recursion. For this case the parent of the component
+ -- list is the record definition, and its parent is the
+ -- full type declaration containing the discriminant
+ -- specifications.
elsif Nkind (Parent (Clist)) = N_Record_Definition then
Clist := Parent (Parent ((Clist)));
- -- If neither of these two cases, we are at the top of
- -- the tree
+ -- If neither of these two cases, we are at the top of
+ -- the tree.
else
exit Component_List_Loop;
end if;
end loop Component_List_Loop;
- <<Continue_Main_Component_Loop>>
- Next_Entity (C1_Ent);
-
- end loop Main_Component_Loop;
- end Overlap_Check2;
- end if;
-
- -- For records that have component clauses for all components, and
- -- whose size is less than or equal to 32, we need to know the size
- -- in the front end to activate possible packed array processing
- -- where the component type is a record.
-
- -- At this stage Hbit + 1 represents the first unused bit from all
- -- the component clauses processed, so if the component clauses are
- -- complete, then this is the length of the record.
-
- -- For records longer than System.Storage_Unit, and for those where
- -- not all components have component clauses, the back end determines
- -- the length (it may for example be appopriate to round up the size
- -- to some convenient boundary, based on alignment considerations etc).
-
- if Unknown_RM_Size (Rectype)
- and then Hbit + 1 <= 32
- then
- -- Nothing to do if at least one component with no component clause
-
- Comp := First_Entity (Rectype);
- while Present (Comp) loop
- if Ekind (Comp) = E_Component
- or else Ekind (Comp) = E_Discriminant
- then
- if No (Component_Clause (Comp)) then
- return;
- end if;
- end if;
-
- Next_Entity (Comp);
- end loop;
-
- -- If we fall out of loop, all components have component clauses
- -- and so we can set the size to the maximum value.
-
- Set_RM_Size (Rectype, Hbit + 1);
- end if;
-
- end Analyze_Record_Representation_Clause;
-
- -----------------------------
- -- Check_Component_Overlap --
- -----------------------------
-
- procedure Check_Component_Overlap (C1_Ent, C2_Ent : Entity_Id) is
- begin
- if Present (Component_Clause (C1_Ent))
- and then Present (Component_Clause (C2_Ent))
- then
- -- Exclude odd case where we have two tag fields in the same
- -- record, both at location zero. This seems a bit strange,
- -- but it seems to happen in some circumstances ???
-
- if Chars (C1_Ent) = Name_uTag
- and then Chars (C2_Ent) = Name_uTag
- then
- return;
- end if;
-
- -- Here we check if the two fields overlap
-
- declare
- S1 : constant Uint := Component_Bit_Offset (C1_Ent);
- S2 : constant Uint := Component_Bit_Offset (C2_Ent);
- E1 : constant Uint := S1 + Esize (C1_Ent);
- E2 : constant Uint := S2 + Esize (C2_Ent);
-
- begin
- if E2 <= S1 or else E1 <= S2 then
- null;
- else
- Error_Msg_Node_2 :=
- Component_Name (Component_Clause (C2_Ent));
- Error_Msg_Sloc := Sloc (Error_Msg_Node_2);
- Error_Msg_Node_1 :=
- Component_Name (Component_Clause (C1_Ent));
- Error_Msg_N
- ("component& overlaps & #",
- Component_Name (Component_Clause (C1_Ent)));
- end if;
- end;
- end if;
- end Check_Component_Overlap;
-
- -----------------------------------
- -- Check_Constant_Address_Clause --
- -----------------------------------
-
- procedure Check_Constant_Address_Clause
- (Expr : Node_Id;
- U_Ent : Entity_Id)
- is
- procedure Check_At_Constant_Address (Nod : Node_Id);
- -- Checks that the given node N represents a name whose 'Address
- -- is constant (in the same sense as OK_Constant_Address_Clause,
- -- i.e. the address value is the same at the point of declaration
- -- of U_Ent and at the time of elaboration of the address clause.
-
- procedure Check_Expr_Constants (Nod : Node_Id);
- -- Checks that Nod meets the requirements for a constant address
- -- clause in the sense of the enclosing procedure.
-
- procedure Check_List_Constants (Lst : List_Id);
- -- Check that all elements of list Lst meet the requirements for a
- -- constant address clause in the sense of the enclosing procedure.
-
- -------------------------------
- -- Check_At_Constant_Address --
- -------------------------------
-
- procedure Check_At_Constant_Address (Nod : Node_Id) is
- begin
- if Is_Entity_Name (Nod) then
- if Present (Address_Clause (Entity ((Nod)))) then
- Error_Msg_NE
- ("invalid address clause for initialized object &!",
- Nod, U_Ent);
- Error_Msg_NE
- ("address for& cannot" &
- " depend on another address clause! ('R'M 13.1(22))!",
- Nod, U_Ent);
-
- elsif In_Same_Source_Unit (Entity (Nod), U_Ent)
- and then Sloc (U_Ent) < Sloc (Entity (Nod))
- then
- Error_Msg_NE
- ("invalid address clause for initialized object &!",
- Nod, U_Ent);
- Error_Msg_Name_1 := Chars (Entity (Nod));
- Error_Msg_Name_2 := Chars (U_Ent);
- Error_Msg_N
- ("\% must be defined before % ('R'M 13.1(22))!",
- Nod);
- end if;
-
- elsif Nkind (Nod) = N_Selected_Component then
- declare
- T : constant Entity_Id := Etype (Prefix (Nod));
-
- begin
- if (Is_Record_Type (T)
- and then Has_Discriminants (T))
- or else
- (Is_Access_Type (T)
- and then Is_Record_Type (Designated_Type (T))
- and then Has_Discriminants (Designated_Type (T)))
- then
- Error_Msg_NE
- ("invalid address clause for initialized object &!",
- Nod, U_Ent);
- Error_Msg_N
- ("\address cannot depend on component" &
- " of discriminated record ('R'M 13.1(22))!",
- Nod);
- else
- Check_At_Constant_Address (Prefix (Nod));
- end if;
- end;
-
- elsif Nkind (Nod) = N_Indexed_Component then
- Check_At_Constant_Address (Prefix (Nod));
- Check_List_Constants (Expressions (Nod));
-
- else
- Check_Expr_Constants (Nod);
- end if;
- end Check_At_Constant_Address;
-
- --------------------------
- -- Check_Expr_Constants --
- --------------------------
+ <<Continue_Main_Component_Loop>>
+ Next_Entity (C1_Ent);
- procedure Check_Expr_Constants (Nod : Node_Id) is
- begin
- if Nkind (Nod) in N_Has_Etype
- and then Etype (Nod) = Any_Type
- then
- return;
- end if;
+ end loop Main_Component_Loop;
+ end Overlap_Check2;
+ end if;
- case Nkind (Nod) is
- when N_Empty | N_Error =>
- return;
+ -- The following circuit deals with warning on record holes (gaps). We
+ -- skip this check if overlap was detected, since it makes sense for the
+ -- programmer to fix this illegality before worrying about warnings.
+
+ if not Overlap_Detected and Warn_On_Record_Holes then
+ Record_Hole_Check : declare
+ Decl : constant Node_Id := Declaration_Node (Base_Type (Rectype));
+ -- Full declaration of record type
+
+ procedure Check_Component_List
+ (CL : Node_Id;
+ Sbit : Uint;
+ DS : List_Id);
+ -- Check component list CL for holes. The starting bit should be
+ -- Sbit. which is zero for the main record component list and set
+ -- appropriately for recursive calls for variants. DS is set to
+ -- a list of discriminant specifications to be included in the
+ -- consideration of components. It is No_List if none to consider.
+
+ --------------------------
+ -- Check_Component_List --
+ --------------------------
+
+ procedure Check_Component_List
+ (CL : Node_Id;
+ Sbit : Uint;
+ DS : List_Id)
+ is
+ Compl : Integer;
- when N_Identifier | N_Expanded_Name =>
- declare
- Ent : constant Entity_Id := Entity (Nod);
- Loc_Ent : constant Source_Ptr := Sloc (Ent);
- Loc_U_Ent : constant Source_Ptr := Sloc (U_Ent);
+ begin
+ Compl := Integer (List_Length (Component_Items (CL)));
- begin
- if Ekind (Ent) = E_Named_Integer
- or else
- Ekind (Ent) = E_Named_Real
- or else
- Is_Type (Ent)
- then
- return;
+ if DS /= No_List then
+ Compl := Compl + Integer (List_Length (DS));
+ end if;
- elsif
- Ekind (Ent) = E_Constant
- or else
- Ekind (Ent) = E_In_Parameter
- then
- -- This is the case where we must have Ent defined
- -- before U_Ent. Clearly if they are in different
- -- units this requirement is met since the unit
- -- containing Ent is already processed.
+ declare
+ Comps : array (Natural range 0 .. Compl) of Entity_Id;
+ -- Gather components (zero entry is for sort routine)
- if not In_Same_Source_Unit (Ent, U_Ent) then
- return;
+ Ncomps : Natural := 0;
+ -- Number of entries stored in Comps (starting at Comps (1))
- -- Otherwise location of Ent must be before the
- -- location of U_Ent, that's what prior defined means.
+ Citem : Node_Id;
+ -- One component item or discriminant specification
- elsif Loc_Ent < Loc_U_Ent then
- return;
+ Nbit : Uint;
+ -- Starting bit for next component
- else
- Error_Msg_NE
- ("invalid address clause for initialized object &!",
- Nod, U_Ent);
- Error_Msg_Name_1 := Chars (Ent);
- Error_Msg_Name_2 := Chars (U_Ent);
- Error_Msg_N
- ("\% must be defined before % ('R'M 13.1(22))!",
- Nod);
- end if;
+ CEnt : Entity_Id;
+ -- Component entity
- elsif Nkind (Original_Node (Nod)) = N_Function_Call then
- Check_Expr_Constants (Original_Node (Nod));
+ Variant : Node_Id;
+ -- One variant
- else
- Error_Msg_NE
- ("invalid address clause for initialized object &!",
- Nod, U_Ent);
- Error_Msg_Name_1 := Chars (Ent);
- Error_Msg_N
- ("\reference to variable% not allowed ('R'M 13.1(22))!",
- Nod);
- end if;
- end;
+ function Lt (Op1, Op2 : Natural) return Boolean;
+ -- Compare routine for Sort
- when N_Integer_Literal |
- N_Real_Literal |
- N_String_Literal |
- N_Character_Literal =>
- return;
+ procedure Move (From : Natural; To : Natural);
+ -- Move routine for Sort
- when N_Range =>
- Check_Expr_Constants (Low_Bound (Nod));
- Check_Expr_Constants (High_Bound (Nod));
+ package Sorting is new GNAT.Heap_Sort_G (Move, Lt);
- when N_Explicit_Dereference =>
- Check_Expr_Constants (Prefix (Nod));
+ --------
+ -- Lt --
+ --------
- when N_Indexed_Component =>
- Check_Expr_Constants (Prefix (Nod));
- Check_List_Constants (Expressions (Nod));
+ function Lt (Op1, Op2 : Natural) return Boolean is
+ begin
+ return Component_Bit_Offset (Comps (Op1))
+ <
+ Component_Bit_Offset (Comps (Op2));
+ end Lt;
- when N_Slice =>
- Check_Expr_Constants (Prefix (Nod));
- Check_Expr_Constants (Discrete_Range (Nod));
+ ----------
+ -- Move --
+ ----------
- when N_Selected_Component =>
- Check_Expr_Constants (Prefix (Nod));
+ procedure Move (From : Natural; To : Natural) is
+ begin
+ Comps (To) := Comps (From);
+ end Move;
- when N_Attribute_Reference =>
+ begin
+ -- Gather discriminants into Comp
- if (Attribute_Name (Nod) = Name_Address
- or else
- Attribute_Name (Nod) = Name_Access
- or else
- Attribute_Name (Nod) = Name_Unchecked_Access
- or else
- Attribute_Name (Nod) = Name_Unrestricted_Access)
- then
- Check_At_Constant_Address (Prefix (Nod));
+ if DS /= No_List then
+ Citem := First (DS);
+ while Present (Citem) loop
+ if Nkind (Citem) = N_Discriminant_Specification then
+ declare
+ Ent : constant Entity_Id :=
+ Defining_Identifier (Citem);
+ begin
+ if Ekind (Ent) = E_Discriminant then
+ Ncomps := Ncomps + 1;
+ Comps (Ncomps) := Ent;
+ end if;
+ end;
+ end if;
- else
- Check_Expr_Constants (Prefix (Nod));
- Check_List_Constants (Expressions (Nod));
- end if;
+ Next (Citem);
+ end loop;
+ end if;
- when N_Aggregate =>
- Check_List_Constants (Component_Associations (Nod));
- Check_List_Constants (Expressions (Nod));
+ -- Gather component entities into Comp
- when N_Component_Association =>
- Check_Expr_Constants (Expression (Nod));
+ Citem := First (Component_Items (CL));
+ while Present (Citem) loop
+ if Nkind (Citem) = N_Component_Declaration then
+ Ncomps := Ncomps + 1;
+ Comps (Ncomps) := Defining_Identifier (Citem);
+ end if;
- when N_Extension_Aggregate =>
- Check_Expr_Constants (Ancestor_Part (Nod));
- Check_List_Constants (Component_Associations (Nod));
- Check_List_Constants (Expressions (Nod));
+ Next (Citem);
+ end loop;
- when N_Null =>
- return;
+ -- Now sort the component entities based on the first bit.
+ -- Note we already know there are no overlapping components.
- when N_Binary_Op | N_And_Then | N_Or_Else | N_In | N_Not_In =>
- Check_Expr_Constants (Left_Opnd (Nod));
- Check_Expr_Constants (Right_Opnd (Nod));
+ Sorting.Sort (Ncomps);
- when N_Unary_Op =>
- Check_Expr_Constants (Right_Opnd (Nod));
+ -- Loop through entries checking for holes
- when N_Type_Conversion |
- N_Qualified_Expression |
- N_Allocator =>
- Check_Expr_Constants (Expression (Nod));
+ Nbit := Sbit;
+ for J in 1 .. Ncomps loop
+ CEnt := Comps (J);
+ Error_Msg_Uint_1 := Component_Bit_Offset (CEnt) - Nbit;
- when N_Unchecked_Type_Conversion =>
- Check_Expr_Constants (Expression (Nod));
+ if Error_Msg_Uint_1 > 0 then
+ Error_Msg_NE
+ ("?^-bit gap before component&",
+ Component_Name (Component_Clause (CEnt)), CEnt);
+ end if;
+
+ Nbit := Component_Bit_Offset (CEnt) + Esize (CEnt);
+ end loop;
- -- If this is a rewritten unchecked conversion, subtypes
- -- in this node are those created within the instance.
- -- To avoid order of elaboration issues, replace them
- -- with their base types. Note that address clauses can
- -- cause order of elaboration problems because they are
- -- elaborated by the back-end at the point of definition,
- -- and may mention entities declared in between (as long
- -- as everything is static). It is user-friendly to allow
- -- unchecked conversions in this context.
+ -- Process variant parts recursively if present
- if Nkind (Original_Node (Nod)) = N_Function_Call then
- Set_Etype (Expression (Nod),
- Base_Type (Etype (Expression (Nod))));
- Set_Etype (Nod, Base_Type (Etype (Nod)));
- end if;
+ if Present (Variant_Part (CL)) then
+ Variant := First (Variants (Variant_Part (CL)));
+ while Present (Variant) loop
+ Check_Component_List
+ (Component_List (Variant), Nbit, No_List);
+ Next (Variant);
+ end loop;
+ end if;
+ end;
+ end Check_Component_List;
- when N_Function_Call =>
- if not Is_Pure (Entity (Name (Nod))) then
- Error_Msg_NE
- ("invalid address clause for initialized object &!",
- Nod, U_Ent);
+ -- Start of processing for Record_Hole_Check
- Error_Msg_NE
- ("\function & is not pure ('R'M 13.1(22))!",
- Nod, Entity (Name (Nod)));
+ begin
+ declare
+ Sbit : Uint;
+ begin
+ if Is_Tagged_Type (Rectype) then
+ Sbit := UI_From_Int (System_Address_Size);
else
- Check_List_Constants (Parameter_Associations (Nod));
+ Sbit := Uint_0;
end if;
- when N_Parameter_Association =>
- Check_Expr_Constants (Explicit_Actual_Parameter (Nod));
+ if Nkind (Decl) = N_Full_Type_Declaration
+ and then Nkind (Type_Definition (Decl)) = N_Record_Definition
+ then
+ Check_Component_List
+ (Component_List (Type_Definition (Decl)),
+ Sbit,
+ Discriminant_Specifications (Decl));
+ end if;
+ end;
+ end Record_Hole_Check;
+ end if;
- when others =>
- Error_Msg_NE
- ("invalid address clause for initialized object &!",
- Nod, U_Ent);
- Error_Msg_NE
- ("\must be constant defined before& ('R'M 13.1(22))!",
- Nod, U_Ent);
- end case;
- end Check_Expr_Constants;
+ -- For records that have component clauses for all components, and whose
+ -- size is less than or equal to 32, we need to know the size in the
+ -- front end to activate possible packed array processing where the
+ -- component type is a record.
- --------------------------
- -- Check_List_Constants --
- --------------------------
+ -- At this stage Hbit + 1 represents the first unused bit from all the
+ -- component clauses processed, so if the component clauses are
+ -- complete, then this is the length of the record.
- procedure Check_List_Constants (Lst : List_Id) is
- Nod1 : Node_Id;
+ -- For records longer than System.Storage_Unit, and for those where not
+ -- all components have component clauses, the back end determines the
+ -- length (it may for example be appropriate to round up the size
+ -- to some convenient boundary, based on alignment considerations, etc).
- begin
- if Present (Lst) then
- Nod1 := First (Lst);
- while Present (Nod1) loop
- Check_Expr_Constants (Nod1);
- Next (Nod1);
- end loop;
- end if;
- end Check_List_Constants;
+ if Unknown_RM_Size (Rectype) and then Hbit + 1 <= 32 then
- -- Start of processing for Check_Constant_Address_Clause
+ -- Nothing to do if at least one component has no component clause
- begin
- Check_Expr_Constants (Expr);
- end Check_Constant_Address_Clause;
+ Comp := First_Component_Or_Discriminant (Rectype);
+ while Present (Comp) loop
+ exit when No (Component_Clause (Comp));
+ Next_Component_Or_Discriminant (Comp);
+ end loop;
+
+ -- If we fall out of loop, all components have component clauses
+ -- and so we can set the size to the maximum value.
+
+ if No (Comp) then
+ Set_RM_Size (Rectype, Hbit + 1);
+ end if;
+ end if;
+ end Check_Record_Representation_Clause;
----------------
-- Check_Size --
begin
Biased := False;
- -- Immediate return if size is same as standard size or if composite
- -- item, or generic type, or type with previous errors.
+ -- Dismiss cases for generic types or types with previous errors
if No (UT)
or else UT = Any_Type
or else Is_Generic_Type (UT)
or else Is_Generic_Type (Root_Type (UT))
- or else Is_Composite_Type (UT)
- or else (Known_Esize (UT) and then Siz = Esize (UT))
then
return;
+ -- Check case of bit packed array
+
+ elsif Is_Array_Type (UT)
+ and then Known_Static_Component_Size (UT)
+ and then Is_Bit_Packed_Array (UT)
+ then
+ declare
+ Asiz : Uint;
+ Indx : Node_Id;
+ Ityp : Entity_Id;
+
+ begin
+ Asiz := Component_Size (UT);
+ Indx := First_Index (UT);
+ loop
+ Ityp := Etype (Indx);
+
+ -- If non-static bound, then we are not in the business of
+ -- trying to check the length, and indeed an error will be
+ -- issued elsewhere, since sizes of non-static array types
+ -- cannot be set implicitly or explicitly.
+
+ if not Is_Static_Subtype (Ityp) then
+ return;
+ end if;
+
+ -- Otherwise accumulate next dimension
+
+ Asiz := Asiz * (Expr_Value (Type_High_Bound (Ityp)) -
+ Expr_Value (Type_Low_Bound (Ityp)) +
+ Uint_1);
+
+ Next_Index (Indx);
+ exit when No (Indx);
+ end loop;
+
+ if Asiz <= Siz then
+ return;
+ else
+ Error_Msg_Uint_1 := Asiz;
+ Error_Msg_NE
+ ("size for& too small, minimum allowed is ^", N, T);
+ Set_Esize (T, Asiz);
+ Set_RM_Size (T, Asiz);
+ end if;
+ end;
+
+ -- All other composite types are ignored
+
+ elsif Is_Composite_Type (UT) then
+ return;
+
-- For fixed-point types, don't check minimum if type is not frozen,
- -- since type is not known till then
- -- at freeze time.
+ -- since we don't know all the characteristics of the type that can
+ -- affect the size (e.g. a specified small) till freeze time.
elsif Is_Fixed_Point_Type (UT)
and then not Is_Frozen (UT)
-- Cases for which a minimum check is required
else
+ -- Ignore if specified size is correct for the type
+
+ if Known_Esize (UT) and then Siz = Esize (UT) then
+ return;
+ end if;
+
+ -- Otherwise get minimum size
+
M := UI_From_Int (Minimum_Size (UT));
if Siz < M then
-- Size is less than minimum size, but one possibility remains
- -- that we can manage with the new size if we bias the type
+ -- that we can manage with the new size if we bias the type.
M := UI_From_Int (Minimum_Size (UT, Biased => True));
Error_Msg_Uint_1 := M;
Error_Msg_NE
("size for& too small, minimum allowed is ^", N, T);
+ Set_Esize (T, M);
+ Set_RM_Size (T, M);
else
Biased := True;
end if;
end if;
end Get_Alignment_Value;
- -------------------------------------
- -- Get_Attribute_Definition_Clause --
- -------------------------------------
-
- function Get_Attribute_Definition_Clause
- (E : Entity_Id;
- Id : Attribute_Id)
- return Node_Id
- is
- N : Node_Id;
-
- begin
- N := First_Rep_Item (E);
- while Present (N) loop
- if Nkind (N) = N_Attribute_Definition_Clause
- and then Get_Attribute_Id (Chars (N)) = Id
- then
- return N;
- else
- Next_Rep_Item (N);
- end if;
- end loop;
-
- return Empty;
- end Get_Attribute_Definition_Clause;
-
- --------------------
- -- Get_Rep_Pragma --
- --------------------
-
- function Get_Rep_Pragma (E : Entity_Id; Nam : Name_Id) return Node_Id is
- N : Node_Id;
- Typ : Entity_Id;
-
- begin
- N := First_Rep_Item (E);
-
- while Present (N) loop
- if Nkind (N) = N_Pragma and then Chars (N) = Nam then
-
- if Nam = Name_Stream_Convert then
-
- -- For tagged types this pragma is not inherited, so we
- -- must verify that it is defined for the given type and
- -- not an ancestor.
-
- Typ := Entity (Expression
- (First (Pragma_Argument_Associations (N))));
-
- if not Is_Tagged_Type (E)
- or else E = Typ
- or else (Is_Private_Type (Typ)
- and then E = Full_View (Typ))
- then
- return N;
- else
- Next_Rep_Item (N);
- end if;
-
- else
- return N;
- end if;
- else
- Next_Rep_Item (N);
- end if;
- end loop;
-
- return Empty;
- end Get_Rep_Pragma;
-
----------------
-- Initialize --
----------------
procedure Initialize is
begin
+ Address_Clause_Checks.Init;
+ Independence_Checks.Init;
Unchecked_Conversions.Init;
end Initialize;
else
declare
Id : constant Attribute_Id := Get_Attribute_Id (Chars (N));
-
begin
- return Id = Attribute_Input
+ return Id = Attribute_Input
or else Id = Attribute_Output
or else Id = Attribute_Read
- or else Id = Attribute_Write;
+ or else Id = Attribute_Write
+ or else Id = Attribute_External_Tag;
end;
end if;
end Is_Operational_Item;
function Minimum_Size
(T : Entity_Id;
- Biased : Boolean := False)
- return Nat
+ Biased : Boolean := False) return Nat
is
Lo : Uint := No_Uint;
Hi : Uint := No_Uint;
B : Uint;
S : Nat;
Ancest : Entity_Id;
+ R_Typ : constant Entity_Id := Root_Type (T);
begin
-- If bad type, return 0
-- need to know such a size, but this routine may be called with a
-- generic type as part of normal processing.
- elsif Is_Generic_Type (Root_Type (T)) then
+ elsif Is_Generic_Type (R_Typ)
+ or else R_Typ = Any_Type
+ then
return 0;
- -- Access types
+ -- Access types. Normally an access type cannot have a size smaller
+ -- than the size of System.Address. The exception is on VMS, where
+ -- we have short and long addresses, and it is possible for an access
+ -- type to have a short address size (and thus be less than the size
+ -- of System.Address itself). We simply skip the check for VMS, and
+ -- leave it to the back end to do the check.
elsif Is_Access_Type (T) then
- return System_Address_Size;
+ if OpenVMS_On_Target then
+ return 0;
+ else
+ return System_Address_Size;
+ end if;
-- Floating-point types
elsif Is_Floating_Point_Type (T) then
- return UI_To_Int (Esize (Root_Type (T)));
+ return UI_To_Int (Esize (R_Typ));
-- Discrete types
elsif Is_Discrete_Type (T) then
- -- The following loop is looking for the nearest compile time
- -- known bounds following the ancestor subtype chain. The idea
- -- is to find the most restrictive known bounds information.
+ -- The following loop is looking for the nearest compile time known
+ -- bounds following the ancestor subtype chain. The idea is to find
+ -- the most restrictive known bounds information.
Ancest := T;
loop
end loop;
-- Fixed-point types. We can't simply use Expr_Value to get the
- -- Corresponding_Integer_Value values of the bounds, since these
- -- do not get set till the type is frozen, and this routine can
- -- be called before the type is frozen. Similarly the test for
- -- bounds being static needs to include the case where we have
- -- unanalyzed real literals for the same reason.
+ -- Corresponding_Integer_Value values of the bounds, since these do not
+ -- get set till the type is frozen, and this routine can be called
+ -- before the type is frozen. Similarly the test for bounds being static
+ -- needs to include the case where we have unanalyzed real literals for
+ -- the same reason.
elsif Is_Fixed_Point_Type (T) then
- -- The following loop is looking for the nearest compile time
- -- known bounds following the ancestor subtype chain. The idea
- -- is to find the most restrictive known bounds information.
+ -- The following loop is looking for the nearest compile time known
+ -- bounds following the ancestor subtype chain. The idea is to find
+ -- the most restrictive known bounds information.
Ancest := T;
loop
return 0;
end if;
+ -- Note: In the following two tests for LoSet and HiSet, it may
+ -- seem redundant to test for N_Real_Literal here since normally
+ -- one would assume that the test for the value being known at
+ -- compile time includes this case. However, there is a glitch.
+ -- If the real literal comes from folding a non-static expression,
+ -- then we don't consider any non- static expression to be known
+ -- at compile time if we are in configurable run time mode (needed
+ -- in some cases to give a clearer definition of what is and what
+ -- is not accepted). So the test is indeed needed. Without it, we
+ -- would set neither Lo_Set nor Hi_Set and get an infinite loop.
+
if not LoSet then
if Nkind (Type_Low_Bound (Ancest)) = N_Real_Literal
or else Compile_Time_Known_Value (Type_Low_Bound (Ancest))
raise Program_Error;
end if;
- -- Fall through with Hi and Lo set. Deal with biased case.
+ -- Fall through with Hi and Lo set. Deal with biased case
- if (Biased and then not Is_Fixed_Point_Type (T))
+ if (Biased
+ and then not Is_Fixed_Point_Type (T)
+ and then not (Is_Enumeration_Type (T)
+ and then Has_Non_Standard_Rep (T)))
or else Has_Biased_Representation (T)
then
Hi := Hi - Lo;
end if;
-- Signed case. Note that we consider types like range 1 .. -1 to be
- -- signed for the purpose of computing the size, since the bounds
- -- have to be accomodated in the base type.
+ -- signed for the purpose of computing the size, since the bounds have
+ -- to be accommodated in the base type.
if Lo < 0 or else Hi < 0 then
S := 1;
return S;
end Minimum_Size;
- -------------------------
- -- New_Stream_Function --
- -------------------------
+ ---------------------------
+ -- New_Stream_Subprogram --
+ ---------------------------
- procedure New_Stream_Function
- (N : Node_Id;
- Ent : Entity_Id;
- Subp : Entity_Id;
- Nam : Name_Id)
+ procedure New_Stream_Subprogram
+ (N : Node_Id;
+ Ent : Entity_Id;
+ Subp : Entity_Id;
+ Nam : TSS_Name_Type)
is
Loc : constant Source_Ptr := Sloc (N);
- Subp_Id : Entity_Id := Make_Defining_Identifier (Loc, Nam);
+ Sname : constant Name_Id := Make_TSS_Name (Base_Type (Ent), Nam);
+ Subp_Id : Entity_Id;
Subp_Decl : Node_Id;
F : Entity_Id;
Etyp : Entity_Id;
+ Defer_Declaration : constant Boolean :=
+ Is_Tagged_Type (Ent) or else Is_Private_Type (Ent);
+ -- For a tagged type, there is a declaration for each stream attribute
+ -- at the freeze point, and we must generate only a completion of this
+ -- declaration. We do the same for private types, because the full view
+ -- might be tagged. Otherwise we generate a declaration at the point of
+ -- the attribute definition clause.
+
+ function Build_Spec return Node_Id;
+ -- Used for declaration and renaming declaration, so that this is
+ -- treated as a renaming_as_body.
+
+ ----------------
+ -- Build_Spec --
+ ----------------
+
+ function Build_Spec return Node_Id is
+ Out_P : constant Boolean := (Nam = TSS_Stream_Read);
+ Formals : List_Id;
+ Spec : Node_Id;
+ T_Ref : constant Node_Id := New_Reference_To (Etyp, Loc);
+
+ begin
+ Subp_Id := Make_Defining_Identifier (Loc, Sname);
+
+ -- S : access Root_Stream_Type'Class
+
+ Formals := New_List (
+ Make_Parameter_Specification (Loc,
+ Defining_Identifier =>
+ Make_Defining_Identifier (Loc, Name_S),
+ Parameter_Type =>
+ Make_Access_Definition (Loc,
+ Subtype_Mark =>
+ New_Reference_To (
+ Designated_Type (Etype (F)), Loc))));
+
+ if Nam = TSS_Stream_Input then
+ Spec := Make_Function_Specification (Loc,
+ Defining_Unit_Name => Subp_Id,
+ Parameter_Specifications => Formals,
+ Result_Definition => T_Ref);
+ else
+ -- V : [out] T
+
+ Append_To (Formals,
+ Make_Parameter_Specification (Loc,
+ Defining_Identifier => Make_Defining_Identifier (Loc, Name_V),
+ Out_Present => Out_P,
+ Parameter_Type => T_Ref));
+
+ Spec :=
+ Make_Procedure_Specification (Loc,
+ Defining_Unit_Name => Subp_Id,
+ Parameter_Specifications => Formals);
+ end if;
+
+ return Spec;
+ end Build_Spec;
+
+ -- Start of processing for New_Stream_Subprogram
+
begin
- F := First_Formal (Subp);
- Etyp := Etype (Subp);
+ F := First_Formal (Subp);
- Subp_Decl :=
- Make_Subprogram_Renaming_Declaration (Loc,
- Specification =>
-
- Make_Function_Specification (Loc,
- Defining_Unit_Name => Subp_Id,
- Parameter_Specifications =>
- New_List (
- Make_Parameter_Specification (Loc,
- Defining_Identifier =>
- Make_Defining_Identifier (Loc, Name_S),
- Parameter_Type =>
- Make_Access_Definition (Loc,
- Subtype_Mark =>
- New_Reference_To (
- Designated_Type (Etype (F)), Loc)))),
-
- Subtype_Mark =>
- New_Reference_To (Etyp, Loc)),
-
- Name => New_Reference_To (Subp, Loc));
-
- if Is_Tagged_Type (Ent) and then not Is_Limited_Type (Ent) then
- Set_TSS (Base_Type (Ent), Subp_Id);
+ if Ekind (Subp) = E_Procedure then
+ Etyp := Etype (Next_Formal (F));
else
- Insert_Action (N, Subp_Decl);
- Copy_TSS (Subp_Id, Base_Type (Ent));
+ Etyp := Etype (Subp);
end if;
- end New_Stream_Function;
+ -- Prepare subprogram declaration and insert it as an action on the
+ -- clause node. The visibility for this entity is used to test for
+ -- visibility of the attribute definition clause (in the sense of
+ -- 8.3(23) as amended by AI-195).
- --------------------------
- -- New_Stream_Procedure --
- --------------------------
+ if not Defer_Declaration then
+ Subp_Decl :=
+ Make_Subprogram_Declaration (Loc,
+ Specification => Build_Spec);
- procedure New_Stream_Procedure
- (N : Node_Id;
- Ent : Entity_Id;
- Subp : Entity_Id;
- Nam : Name_Id;
- Out_P : Boolean := False)
- is
- Loc : constant Source_Ptr := Sloc (N);
- Subp_Id : Entity_Id := Make_Defining_Identifier (Loc, Nam);
- Subp_Decl : Node_Id;
- F : Entity_Id;
- Etyp : Entity_Id;
+ -- For a tagged type, there is always a visible declaration for each
+ -- stream TSS (it is a predefined primitive operation), and the
+ -- completion of this declaration occurs at the freeze point, which is
+ -- not always visible at places where the attribute definition clause is
+ -- visible. So, we create a dummy entity here for the purpose of
+ -- tracking the visibility of the attribute definition clause itself.
+
+ else
+ Subp_Id :=
+ Make_Defining_Identifier (Loc,
+ Chars => New_External_Name (Sname, 'V'));
+ Subp_Decl :=
+ Make_Object_Declaration (Loc,
+ Defining_Identifier => Subp_Id,
+ Object_Definition => New_Occurrence_Of (Standard_Boolean, Loc));
+ end if;
- begin
- F := First_Formal (Subp);
- Etyp := Etype (Next_Formal (F));
+ Insert_Action (N, Subp_Decl);
+ Set_Entity (N, Subp_Id);
Subp_Decl :=
Make_Subprogram_Renaming_Declaration (Loc,
- Specification =>
-
- Make_Procedure_Specification (Loc,
- Defining_Unit_Name => Subp_Id,
- Parameter_Specifications =>
- New_List (
- Make_Parameter_Specification (Loc,
- Defining_Identifier =>
- Make_Defining_Identifier (Loc, Name_S),
- Parameter_Type =>
- Make_Access_Definition (Loc,
- Subtype_Mark =>
- New_Reference_To (
- Designated_Type (Etype (F)), Loc))),
-
- Make_Parameter_Specification (Loc,
- Defining_Identifier =>
- Make_Defining_Identifier (Loc, Name_V),
- Out_Present => Out_P,
- Parameter_Type =>
- New_Reference_To (Etyp, Loc)))),
- Name => New_Reference_To (Subp, Loc));
-
- if Is_Tagged_Type (Ent) and then not Is_Limited_Type (Ent) then
+ Specification => Build_Spec,
+ Name => New_Reference_To (Subp, Loc));
+
+ if Defer_Declaration then
Set_TSS (Base_Type (Ent), Subp_Id);
else
Insert_Action (N, Subp_Decl);
Copy_TSS (Subp_Id, Base_Type (Ent));
end if;
-
- end New_Stream_Procedure;
-
- ---------------------
- -- Record_Rep_Item --
- ---------------------
-
- procedure Record_Rep_Item (T : Entity_Id; N : Node_Id) is
- begin
- Set_Next_Rep_Item (N, First_Rep_Item (T));
- Set_First_Rep_Item (T, N);
- end Record_Rep_Item;
+ end New_Stream_Subprogram;
------------------------
-- Rep_Item_Too_Early --
------------------------
- function Rep_Item_Too_Early
- (T : Entity_Id;
- N : Node_Id)
- return Boolean
- is
+ function Rep_Item_Too_Early (T : Entity_Id; N : Node_Id) return Boolean is
begin
- -- Cannot apply rep items to generic types
+ -- Cannot apply non-operational rep items to generic types
- if Is_Type (T)
+ if Is_Operational_Item (N) then
+ return False;
+
+ elsif Is_Type (T)
and then Is_Generic_Type (Root_Type (T))
then
- Error_Msg_N
- ("representation item not allowed for generic type", N);
+ Error_Msg_N ("representation item not allowed for generic type", N);
return True;
end if;
- -- Otherwise check for incompleted type
+ -- Otherwise check for incomplete type
if Is_Incomplete_Or_Private_Type (T)
and then No (Underlying_Type (T))
("representation item must be after full type declaration", N);
return True;
- -- If the type has incompleted components, a representation clause is
+ -- If the type has incomplete components, a representation clause is
-- illegal but stream attributes and Convention pragmas are correct.
elsif Has_Private_Component (T) then
- if (Nkind (N) = N_Pragma or else Is_Operational_Item (N)) then
+ if Nkind (N) = N_Pragma then
return False;
else
Error_Msg_N
function Rep_Item_Too_Late
(T : Entity_Id;
N : Node_Id;
- FOnly : Boolean := False)
- return Boolean
+ FOnly : Boolean := False) return Boolean
is
S : Entity_Id;
Parent_Type : Entity_Id;
procedure Too_Late;
- -- Output the too late message
+ -- Output the too late message. Note that this is not considered a
+ -- serious error, since the effect is simply that we ignore the
+ -- representation clause in this case.
+
+ --------------
+ -- Too_Late --
+ --------------
procedure Too_Late is
begin
- Error_Msg_N ("representation item appears too late!", N);
+ Error_Msg_N ("|representation item appears too late!", N);
end Too_Late;
-- Start of processing for Rep_Item_Too_Late
if Present (Freeze_Node (S)) then
Error_Msg_NE
- ("?no more representation items for }!", Freeze_Node (S), S);
+ ("?no more representation items for }", Freeze_Node (S), S);
end if;
return True;
end if;
end if;
- -- No error, link item into head of chain of rep items for the entity
+ -- No error, link item into head of chain of rep items for the entity,
+ -- but avoid chaining if we have an overloadable entity, and the pragma
+ -- is one that can apply to multiple overloaded entities.
+
+ if Is_Overloadable (T)
+ and then Nkind (N) = N_Pragma
+ then
+ declare
+ Pname : constant Name_Id := Pragma_Name (N);
+ begin
+ if Pname = Name_Convention or else
+ Pname = Name_Import or else
+ Pname = Name_Export or else
+ Pname = Name_External or else
+ Pname = Name_Interface
+ then
+ return False;
+ end if;
+ end;
+ end if;
Record_Rep_Item (T, N);
return False;
return not Has_Non_Standard_Rep (T2);
end if;
- -- Here the two types both have non-standard representation, and we
- -- need to determine if they have the same non-standard representation
+ -- Here the two types both have non-standard representation, and we need
+ -- to determine if they have the same non-standard representation.
-- For arrays, we simply need to test if the component sizes are the
-- same. Pragma Pack is reflected in modified component sizes, so this
if Is_Packed (T1) /= Is_Packed (T2) then
return False;
- -- Otherwise we must check components. Typ2 maybe a constrained
- -- subtype with fewer components, so we compare the components
- -- of the base types.
+ -- Otherwise we must check components. Typ2 maybe a constrained
+ -- subtype with fewer components, so we compare the components
+ -- of the base types.
+
+ else
+ Record_Case : declare
+ CD1, CD2 : Entity_Id;
+
+ function Same_Rep return Boolean;
+ -- CD1 and CD2 are either components or discriminants. This
+ -- function tests whether the two have the same representation
+
+ --------------
+ -- Same_Rep --
+ --------------
+
+ function Same_Rep return Boolean is
+ begin
+ if No (Component_Clause (CD1)) then
+ return No (Component_Clause (CD2));
+
+ else
+ return
+ Present (Component_Clause (CD2))
+ and then
+ Component_Bit_Offset (CD1) = Component_Bit_Offset (CD2)
+ and then
+ Esize (CD1) = Esize (CD2);
+ end if;
+ end Same_Rep;
+
+ -- Start of processing for Record_Case
+
+ begin
+ if Has_Discriminants (T1) then
+ CD1 := First_Discriminant (T1);
+ CD2 := First_Discriminant (T2);
+
+ -- The number of discriminants may be different if the
+ -- derived type has fewer (constrained by values). The
+ -- invisible discriminants retain the representation of
+ -- the original, so the discrepancy does not per se
+ -- indicate a different representation.
+
+ while Present (CD1)
+ and then Present (CD2)
+ loop
+ if not Same_Rep then
+ return False;
+ else
+ Next_Discriminant (CD1);
+ Next_Discriminant (CD2);
+ end if;
+ end loop;
+ end if;
+
+ CD1 := First_Component (Underlying_Type (Base_Type (T1)));
+ CD2 := First_Component (Underlying_Type (Base_Type (T2)));
+
+ while Present (CD1) loop
+ if not Same_Rep then
+ return False;
+ else
+ Next_Component (CD1);
+ Next_Component (CD2);
+ end if;
+ end loop;
+
+ return True;
+ end Record_Case;
+ end if;
+
+ -- For enumeration types, we must check each literal to see if the
+ -- representation is the same. Note that we do not permit enumeration
+ -- representation clauses for Character and Wide_Character, so these
+ -- cases were already dealt with.
+
+ elsif Is_Enumeration_Type (T1) then
+ Enumeration_Case : declare
+ L1, L2 : Entity_Id;
+
+ begin
+ L1 := First_Literal (T1);
+ L2 := First_Literal (T2);
+
+ while Present (L1) loop
+ if Enumeration_Rep (L1) /= Enumeration_Rep (L2) then
+ return False;
+ else
+ Next_Literal (L1);
+ Next_Literal (L2);
+ end if;
+ end loop;
+
+ return True;
+
+ end Enumeration_Case;
+
+ -- Any other types have the same representation for these purposes
+
+ else
+ return True;
+ end if;
+ end Same_Representation;
+
+ ----------------
+ -- Set_Biased --
+ ----------------
+
+ procedure Set_Biased
+ (E : Entity_Id;
+ N : Node_Id;
+ Msg : String;
+ Biased : Boolean := True)
+ is
+ begin
+ if Biased then
+ Set_Has_Biased_Representation (E);
+
+ if Warn_On_Biased_Representation then
+ Error_Msg_NE
+ ("?" & Msg & " forces biased representation for&", N, E);
+ end if;
+ end if;
+ end Set_Biased;
+
+ --------------------
+ -- Set_Enum_Esize --
+ --------------------
+
+ procedure Set_Enum_Esize (T : Entity_Id) is
+ Lo : Uint;
+ Hi : Uint;
+ Sz : Nat;
+
+ begin
+ Init_Alignment (T);
+
+ -- Find the minimum standard size (8,16,32,64) that fits
+
+ Lo := Enumeration_Rep (Entity (Type_Low_Bound (T)));
+ Hi := Enumeration_Rep (Entity (Type_High_Bound (T)));
+
+ if Lo < 0 then
+ if Lo >= -Uint_2**07 and then Hi < Uint_2**07 then
+ Sz := Standard_Character_Size; -- May be > 8 on some targets
+
+ elsif Lo >= -Uint_2**15 and then Hi < Uint_2**15 then
+ Sz := 16;
+
+ elsif Lo >= -Uint_2**31 and then Hi < Uint_2**31 then
+ Sz := 32;
+
+ else pragma Assert (Lo >= -Uint_2**63 and then Hi < Uint_2**63);
+ Sz := 64;
+ end if;
+
+ else
+ if Hi < Uint_2**08 then
+ Sz := Standard_Character_Size; -- May be > 8 on some targets
+
+ elsif Hi < Uint_2**16 then
+ Sz := 16;
+
+ elsif Hi < Uint_2**32 then
+ Sz := 32;
+
+ else pragma Assert (Hi < Uint_2**63);
+ Sz := 64;
+ end if;
+ end if;
+
+ -- That minimum is the proper size unless we have a foreign convention
+ -- and the size required is 32 or less, in which case we bump the size
+ -- up to 32. This is required for C and C++ and seems reasonable for
+ -- all other foreign conventions.
+
+ if Has_Foreign_Convention (T)
+ and then Esize (T) < Standard_Integer_Size
+ then
+ Init_Esize (T, Standard_Integer_Size);
+ else
+ Init_Esize (T, Sz);
+ end if;
+ end Set_Enum_Esize;
+
+ ------------------------------
+ -- Validate_Address_Clauses --
+ ------------------------------
+
+ procedure Validate_Address_Clauses is
+ begin
+ for J in Address_Clause_Checks.First .. Address_Clause_Checks.Last loop
+ declare
+ ACCR : Address_Clause_Check_Record
+ renames Address_Clause_Checks.Table (J);
+
+ Expr : Node_Id;
+
+ X_Alignment : Uint;
+ Y_Alignment : Uint;
+
+ X_Size : Uint;
+ Y_Size : Uint;
+
+ begin
+ -- Skip processing of this entry if warning already posted
+
+ if not Address_Warning_Posted (ACCR.N) then
+
+ Expr := Original_Node (Expression (ACCR.N));
+
+ -- Get alignments
+
+ X_Alignment := Alignment (ACCR.X);
+ Y_Alignment := Alignment (ACCR.Y);
+
+ -- Similarly obtain sizes
+
+ X_Size := Esize (ACCR.X);
+ Y_Size := Esize (ACCR.Y);
+
+ -- Check for large object overlaying smaller one
+
+ if Y_Size > Uint_0
+ and then X_Size > Uint_0
+ and then X_Size > Y_Size
+ then
+ Error_Msg_NE
+ ("?& overlays smaller object", ACCR.N, ACCR.X);
+ Error_Msg_N
+ ("\?program execution may be erroneous", ACCR.N);
+ Error_Msg_Uint_1 := X_Size;
+ Error_Msg_NE
+ ("\?size of & is ^", ACCR.N, ACCR.X);
+ Error_Msg_Uint_1 := Y_Size;
+ Error_Msg_NE
+ ("\?size of & is ^", ACCR.N, ACCR.Y);
+
+ -- Check for inadequate alignment, both of the base object
+ -- and of the offset, if any.
+
+ -- Note: we do not check the alignment if we gave a size
+ -- warning, since it would likely be redundant.
+
+ elsif Y_Alignment /= Uint_0
+ and then (Y_Alignment < X_Alignment
+ or else (ACCR.Off
+ and then
+ Nkind (Expr) = N_Attribute_Reference
+ and then
+ Attribute_Name (Expr) = Name_Address
+ and then
+ Has_Compatible_Alignment
+ (ACCR.X, Prefix (Expr))
+ /= Known_Compatible))
+ then
+ Error_Msg_NE
+ ("?specified address for& may be inconsistent "
+ & "with alignment",
+ ACCR.N, ACCR.X);
+ Error_Msg_N
+ ("\?program execution may be erroneous (RM 13.3(27))",
+ ACCR.N);
+ Error_Msg_Uint_1 := X_Alignment;
+ Error_Msg_NE
+ ("\?alignment of & is ^",
+ ACCR.N, ACCR.X);
+ Error_Msg_Uint_1 := Y_Alignment;
+ Error_Msg_NE
+ ("\?alignment of & is ^",
+ ACCR.N, ACCR.Y);
+ if Y_Alignment >= X_Alignment then
+ Error_Msg_N
+ ("\?but offset is not multiple of alignment",
+ ACCR.N);
+ end if;
+ end if;
+ end if;
+ end;
+ end loop;
+ end Validate_Address_Clauses;
+
+ ---------------------------
+ -- Validate_Independence --
+ ---------------------------
+
+ procedure Validate_Independence is
+ SU : constant Uint := UI_From_Int (System_Storage_Unit);
+ N : Node_Id;
+ E : Entity_Id;
+ IC : Boolean;
+ Comp : Entity_Id;
+ Addr : Node_Id;
+ P : Node_Id;
+
+ procedure Check_Array_Type (Atyp : Entity_Id);
+ -- Checks if the array type Atyp has independent components, and
+ -- if not, outputs an appropriate set of error messages.
+
+ procedure No_Independence;
+ -- Output message that independence cannot be guaranteed
+
+ function OK_Component (C : Entity_Id) return Boolean;
+ -- Checks one component to see if it is independently accessible, and
+ -- if so yields True, otherwise yields False if independent access
+ -- cannot be guaranteed. This is a conservative routine, it only
+ -- returns True if it knows for sure, it returns False if it knows
+ -- there is a problem, or it cannot be sure there is no problem.
+
+ procedure Reason_Bad_Component (C : Entity_Id);
+ -- Outputs continuation message if a reason can be determined for
+ -- the component C being bad.
+
+ ----------------------
+ -- Check_Array_Type --
+ ----------------------
+
+ procedure Check_Array_Type (Atyp : Entity_Id) is
+ Ctyp : constant Entity_Id := Component_Type (Atyp);
+
+ begin
+ -- OK if no alignment clause, no pack, and no component size
+
+ if not Has_Component_Size_Clause (Atyp)
+ and then not Has_Alignment_Clause (Atyp)
+ and then not Is_Packed (Atyp)
+ then
+ return;
+ end if;
+
+ -- Check actual component size
+
+ if not Known_Component_Size (Atyp)
+ or else not (Addressable (Component_Size (Atyp))
+ and then Component_Size (Atyp) < 64)
+ or else Component_Size (Atyp) mod Esize (Ctyp) /= 0
+ then
+ No_Independence;
+
+ -- Bad component size, check reason
+
+ if Has_Component_Size_Clause (Atyp) then
+ P :=
+ Get_Attribute_Definition_Clause
+ (Atyp, Attribute_Component_Size);
+
+ if Present (P) then
+ Error_Msg_Sloc := Sloc (P);
+ Error_Msg_N ("\because of Component_Size clause#", N);
+ return;
+ end if;
+ end if;
+
+ if Is_Packed (Atyp) then
+ P := Get_Rep_Pragma (Atyp, Name_Pack);
+
+ if Present (P) then
+ Error_Msg_Sloc := Sloc (P);
+ Error_Msg_N ("\because of pragma Pack#", N);
+ return;
+ end if;
+ end if;
+
+ -- No reason found, just return
+
+ return;
+ end if;
+
+ -- Array type is OK independence-wise
+
+ return;
+ end Check_Array_Type;
+
+ ---------------------
+ -- No_Independence --
+ ---------------------
+
+ procedure No_Independence is
+ begin
+ if Pragma_Name (N) = Name_Independent then
+ Error_Msg_NE
+ ("independence cannot be guaranteed for&", N, E);
+ else
+ Error_Msg_NE
+ ("independent components cannot be guaranteed for&", N, E);
+ end if;
+ end No_Independence;
+
+ ------------------
+ -- OK_Component --
+ ------------------
+
+ function OK_Component (C : Entity_Id) return Boolean is
+ Rec : constant Entity_Id := Scope (C);
+ Ctyp : constant Entity_Id := Etype (C);
+
+ begin
+ -- OK if no component clause, no Pack, and no alignment clause
+
+ if No (Component_Clause (C))
+ and then not Is_Packed (Rec)
+ and then not Has_Alignment_Clause (Rec)
+ then
+ return True;
+ end if;
+
+ -- Here we look at the actual component layout. A component is
+ -- addressable if its size is a multiple of the Esize of the
+ -- component type, and its starting position in the record has
+ -- appropriate alignment, and the record itself has appropriate
+ -- alignment to guarantee the component alignment.
- else
- Record_Case : declare
- CD1, CD2 : Entity_Id;
+ -- Make sure sizes are static, always assume the worst for any
+ -- cases where we cannot check static values.
- function Same_Rep return Boolean;
- -- CD1 and CD2 are either components or discriminants. This
- -- function tests whether the two have the same representation
+ if not (Known_Static_Esize (C)
+ and then Known_Static_Esize (Ctyp))
+ then
+ return False;
+ end if;
- function Same_Rep return Boolean is
- begin
- if No (Component_Clause (CD1)) then
- return No (Component_Clause (CD2));
+ -- Size of component must be addressable or greater than 64 bits
+ -- and a multiple of bytes.
- else
- return
- Present (Component_Clause (CD2))
- and then
- Component_Bit_Offset (CD1) = Component_Bit_Offset (CD2)
- and then
- Esize (CD1) = Esize (CD2);
- end if;
- end Same_Rep;
+ if not Addressable (Esize (C))
+ and then Esize (C) < Uint_64
+ then
+ return False;
+ end if;
- -- Start processing for Record_Case
+ -- Check size is proper multiple
- begin
- if Has_Discriminants (T1) then
- CD1 := First_Discriminant (T1);
- CD2 := First_Discriminant (T2);
+ if Esize (C) mod Esize (Ctyp) /= 0 then
+ return False;
+ end if;
- while Present (CD1) loop
- if not Same_Rep then
- return False;
- else
- Next_Discriminant (CD1);
- Next_Discriminant (CD2);
- end if;
- end loop;
- end if;
+ -- Check alignment of component is OK
- CD1 := First_Component (Underlying_Type (Base_Type (T1)));
- CD2 := First_Component (Underlying_Type (Base_Type (T2)));
+ if not Known_Component_Bit_Offset (C)
+ or else Component_Bit_Offset (C) < Uint_0
+ or else Component_Bit_Offset (C) mod Esize (Ctyp) /= 0
+ then
+ return False;
+ end if;
- while Present (CD1) loop
- if not Same_Rep then
- return False;
- else
- Next_Component (CD1);
- Next_Component (CD2);
- end if;
- end loop;
+ -- Check alignment of record type is OK
- return True;
- end Record_Case;
+ if not Known_Alignment (Rec)
+ or else (Alignment (Rec) * SU) mod Esize (Ctyp) /= 0
+ then
+ return False;
end if;
- -- For enumeration types, we must check each literal to see if the
- -- representation is the same. Note that we do not permit enumeration
- -- reprsentation clauses for Character and Wide_Character, so these
- -- cases were already dealt with.
+ -- All tests passed, component is addressable
- elsif Is_Enumeration_Type (T1) then
+ return True;
+ end OK_Component;
- Enumeration_Case : declare
- L1, L2 : Entity_Id;
+ --------------------------
+ -- Reason_Bad_Component --
+ --------------------------
- begin
- L1 := First_Literal (T1);
- L2 := First_Literal (T2);
+ procedure Reason_Bad_Component (C : Entity_Id) is
+ Rec : constant Entity_Id := Scope (C);
+ Ctyp : constant Entity_Id := Etype (C);
- while Present (L1) loop
- if Enumeration_Rep (L1) /= Enumeration_Rep (L2) then
- return False;
- else
- Next_Literal (L1);
- Next_Literal (L2);
- end if;
- end loop;
+ begin
+ -- If component clause present assume that's the problem
- return True;
+ if Present (Component_Clause (C)) then
+ Error_Msg_Sloc := Sloc (Component_Clause (C));
+ Error_Msg_N ("\because of Component_Clause#", N);
+ return;
+ end if;
- end Enumeration_Case;
+ -- If pragma Pack clause present, assume that's the problem
- -- Any other types have the same representation for these purposes
+ if Is_Packed (Rec) then
+ P := Get_Rep_Pragma (Rec, Name_Pack);
- else
- return True;
- end if;
+ if Present (P) then
+ Error_Msg_Sloc := Sloc (P);
+ Error_Msg_N ("\because of pragma Pack#", N);
+ return;
+ end if;
+ end if;
- end Same_Representation;
+ -- See if record has bad alignment clause
- --------------------
- -- Set_Enum_Esize --
- --------------------
+ if Has_Alignment_Clause (Rec)
+ and then Known_Alignment (Rec)
+ and then (Alignment (Rec) * SU) mod Esize (Ctyp) /= 0
+ then
+ P := Get_Attribute_Definition_Clause (Rec, Attribute_Alignment);
- procedure Set_Enum_Esize (T : Entity_Id) is
- Lo : Uint;
- Hi : Uint;
- Sz : Nat;
+ if Present (P) then
+ Error_Msg_Sloc := Sloc (P);
+ Error_Msg_N ("\because of Alignment clause#", N);
+ end if;
+ end if;
- begin
- Init_Alignment (T);
+ -- Couldn't find a reason, so return without a message
- -- Find the minimum standard size (8,16,32,64) that fits
+ return;
+ end Reason_Bad_Component;
- Lo := Enumeration_Rep (Entity (Type_Low_Bound (T)));
- Hi := Enumeration_Rep (Entity (Type_High_Bound (T)));
+ -- Start of processing for Validate_Independence
- if Lo < 0 then
- if Lo >= -Uint_2**07 and then Hi < Uint_2**07 then
- Sz := 8;
+ begin
+ for J in Independence_Checks.First .. Independence_Checks.Last loop
+ N := Independence_Checks.Table (J).N;
+ E := Independence_Checks.Table (J).E;
+ IC := Pragma_Name (N) = Name_Independent_Components;
+
+ -- Deal with component case
+
+ if Ekind (E) = E_Discriminant or else Ekind (E) = E_Component then
+ if not OK_Component (E) then
+ No_Independence;
+ Reason_Bad_Component (E);
+ goto Continue;
+ end if;
+ end if;
- elsif Lo >= -Uint_2**15 and then Hi < Uint_2**15 then
- Sz := 16;
+ -- Deal with record with Independent_Components
- elsif Lo >= -Uint_2**31 and then Hi < Uint_2**31 then
- Sz := 32;
+ if IC and then Is_Record_Type (E) then
+ Comp := First_Component_Or_Discriminant (E);
+ while Present (Comp) loop
+ if not OK_Component (Comp) then
+ No_Independence;
+ Reason_Bad_Component (Comp);
+ goto Continue;
+ end if;
- else pragma Assert (Lo >= -Uint_2**63 and then Hi < Uint_2**63);
- Sz := 64;
+ Next_Component_Or_Discriminant (Comp);
+ end loop;
end if;
- else
- if Hi < Uint_2**08 then
- Sz := 8;
-
- elsif Hi < Uint_2**16 then
- Sz := 16;
+ -- Deal with address clause case
- elsif Hi < Uint_2**32 then
- Sz := 32;
+ if Is_Object (E) then
+ Addr := Address_Clause (E);
- else pragma Assert (Hi < Uint_2**63);
- Sz := 64;
+ if Present (Addr) then
+ No_Independence;
+ Error_Msg_Sloc := Sloc (Addr);
+ Error_Msg_N ("\because of Address clause#", N);
+ goto Continue;
+ end if;
end if;
- end if;
- -- That minimum is the proper size unless we have a foreign convention
- -- and the size required is 32 or less, in which case we bump the size
- -- up to 32. This is required for C and C++ and seems reasonable for
- -- all other foreign conventions.
+ -- Deal with independent components for array type
- if Has_Foreign_Convention (T)
- and then Esize (T) < Standard_Integer_Size
- then
- Init_Esize (T, Standard_Integer_Size);
+ if IC and then Is_Array_Type (E) then
+ Check_Array_Type (E);
+ end if;
- else
- Init_Esize (T, Sz);
- end if;
+ -- Deal with independent components for array object
- end Set_Enum_Esize;
+ if IC and then Is_Object (E) and then Is_Array_Type (Etype (E)) then
+ Check_Array_Type (Etype (E));
+ end if;
+
+ <<Continue>> null;
+ end loop;
+ end Validate_Independence;
-----------------------------------
-- Validate_Unchecked_Conversion --
Target := Ancestor_Subtype (Etype (Act_Unit));
- -- If either type is generic, the instantiation happens within a
- -- generic unit, and there is nothing to check. The proper check
+ -- If either type is generic, the instantiation happens within a generic
+ -- unit, and there is nothing to check. The proper check
-- will happen when the enclosing generic is instantiated.
if Is_Generic_Type (Source) or else Is_Generic_Type (Target) then
return;
end if;
- -- Make entry in unchecked conversion table for later processing
- -- by Validate_Unchecked_Conversions, which will check sizes and
- -- alignments (using values set by the back-end where possible).
+ -- Warn if conversion between two different convention pointers
+
+ if Is_Access_Type (Target)
+ and then Is_Access_Type (Source)
+ and then Convention (Target) /= Convention (Source)
+ and then Warn_On_Unchecked_Conversion
+ then
+ -- Give warnings for subprogram pointers only on most targets. The
+ -- exception is VMS, where data pointers can have different lengths
+ -- depending on the pointer convention.
+
+ if Is_Access_Subprogram_Type (Target)
+ or else Is_Access_Subprogram_Type (Source)
+ or else OpenVMS_On_Target
+ then
+ Error_Msg_N
+ ("?conversion between pointers with different conventions!", N);
+ end if;
+ end if;
+
+ -- Warn if one of the operands is Ada.Calendar.Time. Do not emit a
+ -- warning when compiling GNAT-related sources.
+
+ if Warn_On_Unchecked_Conversion
+ and then not In_Predefined_Unit (N)
+ and then RTU_Loaded (Ada_Calendar)
+ and then
+ (Chars (Source) = Name_Time
+ or else
+ Chars (Target) = Name_Time)
+ then
+ -- If Ada.Calendar is loaded and the name of one of the operands is
+ -- Time, there is a good chance that this is Ada.Calendar.Time.
+
+ declare
+ Calendar_Time : constant Entity_Id :=
+ Full_View (RTE (RO_CA_Time));
+ begin
+ pragma Assert (Present (Calendar_Time));
+
+ if Source = Calendar_Time
+ or else Target = Calendar_Time
+ then
+ Error_Msg_N
+ ("?representation of 'Time values may change between " &
+ "'G'N'A'T versions", N);
+ end if;
+ end;
+ end if;
+
+ -- Make entry in unchecked conversion table for later processing by
+ -- Validate_Unchecked_Conversions, which will check sizes and alignments
+ -- (using values set by the back-end where possible). This is only done
+ -- if the appropriate warning is active.
+
+ if Warn_On_Unchecked_Conversion then
+ Unchecked_Conversions.Append
+ (New_Val => UC_Entry'
+ (Eloc => Sloc (N),
+ Source => Source,
+ Target => Target));
+
+ -- If both sizes are known statically now, then back end annotation
+ -- is not required to do a proper check but if either size is not
+ -- known statically, then we need the annotation.
+
+ if Known_Static_RM_Size (Source)
+ and then Known_Static_RM_Size (Target)
+ then
+ null;
+ else
+ Back_Annotate_Rep_Info := True;
+ end if;
+ end if;
+
+ -- If unchecked conversion to access type, and access type is declared
+ -- in the same unit as the unchecked conversion, then set the
+ -- No_Strict_Aliasing flag (no strict aliasing is implicit in this
+ -- situation).
+
+ if Is_Access_Type (Target) and then
+ In_Same_Source_Unit (Target, N)
+ then
+ Set_No_Strict_Aliasing (Implementation_Base_Type (Target));
+ end if;
+
+ -- Generate N_Validate_Unchecked_Conversion node for back end in
+ -- case the back end needs to perform special validation checks.
+
+ -- Shouldn't this be in Exp_Ch13, since the check only gets done
+ -- if we have full expansion and the back end is called ???
- Unchecked_Conversions.Append
- (New_Val => UC_Entry'
- (Enode => N,
- Source => Source,
- Target => Target));
+ Vnode :=
+ Make_Validate_Unchecked_Conversion (Sloc (N));
+ Set_Source_Type (Vnode, Source);
+ Set_Target_Type (Vnode, Target);
- -- Generate N_Validate_Unchecked_Conversion node for back end if
- -- the back end needs to perform special validation checks. At the
- -- current time, only the JVM version requires such checks.
+ -- If the unchecked conversion node is in a list, just insert before it.
+ -- If not we have some strange case, not worth bothering about.
- if Java_VM then
- Vnode :=
- Make_Validate_Unchecked_Conversion (Sloc (N));
- Set_Source_Type (Vnode, Source);
- Set_Target_Type (Vnode, Target);
+ if Is_List_Member (N) then
Insert_After (N, Vnode);
end if;
end Validate_Unchecked_Conversion;
declare
T : UC_Entry renames Unchecked_Conversions.Table (N);
- Enode : constant Node_Id := T.Enode;
- Source : constant Entity_Id := T.Source;
- Target : constant Entity_Id := T.Target;
+ Eloc : constant Source_Ptr := T.Eloc;
+ Source : constant Entity_Id := T.Source;
+ Target : constant Entity_Id := T.Target;
Source_Siz : Uint;
Target_Siz : Uint;
begin
- -- This validation check, which warns if we have unequal sizes
- -- for unchecked conversion, and thus potentially implementation
+ -- This validation check, which warns if we have unequal sizes for
+ -- unchecked conversion, and thus potentially implementation
-- dependent semantics, is one of the few occasions on which we
- -- use the official RM size instead of Esize. See description
- -- in Einfo "Handling of Type'Size Values" for details.
+ -- use the official RM size instead of Esize. See description in
+ -- Einfo "Handling of Type'Size Values" for details.
- if Errors_Detected = 0
+ if Serious_Errors_Detected = 0
and then Known_Static_RM_Size (Source)
and then Known_Static_RM_Size (Target)
+
+ -- Don't do the check if warnings off for either type, note the
+ -- deliberate use of OR here instead of OR ELSE to get the flag
+ -- Warnings_Off_Used set for both types if appropriate.
+
+ and then not (Has_Warnings_Off (Source)
+ or
+ Has_Warnings_Off (Target))
then
Source_Siz := RM_Size (Source);
Target_Siz := RM_Size (Target);
if Source_Siz /= Target_Siz then
- Warn_On_Instance := True;
- Error_Msg_N
- ("types for unchecked conversion have different sizes?",
- Enode);
+ Error_Msg
+ ("?types for unchecked conversion have different sizes!",
+ Eloc);
if All_Errors_Mode then
Error_Msg_Name_1 := Chars (Source);
Error_Msg_Uint_1 := Source_Siz;
Error_Msg_Name_2 := Chars (Target);
Error_Msg_Uint_2 := Target_Siz;
- Error_Msg_N
- ("\size of % is ^, size of % is ^?", Enode);
+ Error_Msg ("\size of % is ^, size of % is ^?", Eloc);
Error_Msg_Uint_1 := UI_Abs (Source_Siz - Target_Siz);
and then Is_Discrete_Type (Target)
then
if Source_Siz > Target_Siz then
- Error_Msg_N
- ("\^ high order bits of source will be ignored?",
- Enode);
+ Error_Msg
+ ("\?^ high order bits of source will be ignored!",
+ Eloc);
- elsif Is_Modular_Integer_Type (Source) then
- Error_Msg_N
- ("\source will be extended with ^ high order " &
- "zero bits?", Enode);
+ elsif Is_Unsigned_Type (Source) then
+ Error_Msg
+ ("\?source will be extended with ^ high order " &
+ "zero bits?!", Eloc);
else
- Error_Msg_N
- ("\source will be extended with ^ high order " &
- "sign bits?",
- Enode);
+ Error_Msg
+ ("\?source will be extended with ^ high order " &
+ "sign bits!",
+ Eloc);
end if;
elsif Source_Siz < Target_Siz then
if Is_Discrete_Type (Target) then
if Bytes_Big_Endian then
- Error_Msg_N
- ("\target value will include ^ undefined " &
- "low order bits?",
- Enode);
+ Error_Msg
+ ("\?target value will include ^ undefined " &
+ "low order bits!",
+ Eloc);
else
- Error_Msg_N
- ("\target value will include ^ undefined " &
- "high order bits?",
- Enode);
+ Error_Msg
+ ("\?target value will include ^ undefined " &
+ "high order bits!",
+ Eloc);
end if;
else
- Error_Msg_N
- ("\^ trailing bits of target value will be " &
- "undefined?", Enode);
+ Error_Msg
+ ("\?^ trailing bits of target value will be " &
+ "undefined!", Eloc);
end if;
else pragma Assert (Source_Siz > Target_Siz);
- Error_Msg_N
- ("\^ trailing bits of source will be ignored?",
- Enode);
+ Error_Msg
+ ("\?^ trailing bits of source will be ignored!",
+ Eloc);
end if;
end if;
-
- Warn_On_Instance := False;
end if;
end if;
-- If both types are access types, we need to check the alignment.
-- If the alignment of both is specified, we can do it here.
- if Errors_Detected = 0
+ if Serious_Errors_Detected = 0
and then Ekind (Source) in Access_Kind
and then Ekind (Target) in Access_Kind
and then Target_Strict_Alignment
begin
if Source_Align < Target_Align
and then not Is_Tagged_Type (D_Source)
+
+ -- Suppress warning if warnings suppressed on either
+ -- type or either designated type. Note the use of
+ -- OR here instead of OR ELSE. That is intentional,
+ -- we would like to set flag Warnings_Off_Used in
+ -- all types for which warnings are suppressed.
+
+ and then not (Has_Warnings_Off (D_Source)
+ or
+ Has_Warnings_Off (D_Target)
+ or
+ Has_Warnings_Off (Source)
+ or
+ Has_Warnings_Off (Target))
then
- Warn_On_Instance := True;
Error_Msg_Uint_1 := Target_Align;
Error_Msg_Uint_2 := Source_Align;
+ Error_Msg_Node_1 := D_Target;
Error_Msg_Node_2 := D_Source;
- Error_Msg_NE
- ("alignment of & (^) is stricter than " &
- "alignment of & (^)?", Enode, D_Target);
-
- if All_Errors_Mode then
- Error_Msg_N
- ("\resulting access value may have invalid " &
- "alignment?", Enode);
- end if;
-
- Warn_On_Instance := False;
+ Error_Msg
+ ("?alignment of & (^) is stricter than " &
+ "alignment of & (^)!", Eloc);
+ Error_Msg
+ ("\?resulting access value may have invalid " &
+ "alignment!", Eloc);
end if;
end;
end if;
end loop;
end Validate_Unchecked_Conversions;
- ------------------
- -- Warn_Overlay --
- ------------------
-
- procedure Warn_Overlay
- (Expr : Node_Id;
- Typ : Entity_Id;
- Nam : Node_Id)
- is
- Old : Entity_Id := Empty;
- Decl : Node_Id;
-
- begin
- if not Address_Clause_Overlay_Warnings then
- return;
- end if;
-
- if Present (Expr)
- and then (Has_Non_Null_Base_Init_Proc (Typ)
- or else Is_Access_Type (Typ))
- and then not Is_Imported (Entity (Nam))
- then
- if Nkind (Expr) = N_Attribute_Reference
- and then Is_Entity_Name (Prefix (Expr))
- then
- Old := Entity (Prefix (Expr));
-
- elsif Is_Entity_Name (Expr)
- and then Ekind (Entity (Expr)) = E_Constant
- then
- Decl := Declaration_Node (Entity (Expr));
-
- if Nkind (Decl) = N_Object_Declaration
- and then Present (Expression (Decl))
- and then Nkind (Expression (Decl)) = N_Attribute_Reference
- and then Is_Entity_Name (Prefix (Expression (Decl)))
- then
- Old := Entity (Prefix (Expression (Decl)));
-
- elsif Nkind (Expr) = N_Function_Call then
- return;
- end if;
-
- -- A function call (most likely to To_Address) is probably not
- -- an overlay, so skip warning. Ditto if the function call was
- -- inlined and transformed into an entity.
-
- elsif Nkind (Original_Node (Expr)) = N_Function_Call then
- return;
- end if;
-
- Decl := Next (Parent (Expr));
-
- -- If a pragma Import follows, we assume that it is for the current
- -- target of the address clause, and skip the warning.
-
- if Present (Decl)
- and then Nkind (Decl) = N_Pragma
- and then Chars (Decl) = Name_Import
- then
- return;
- end if;
-
- if Present (Old) then
- Error_Msg_Node_2 := Old;
- Error_Msg_N
- ("default initialization of & may modify &?",
- Nam);
- else
- Error_Msg_N
- ("default initialization of & may modify overlaid storage?",
- Nam);
- end if;
-
- -- Add friendly warning if initialization comes from a packed array
- -- component.
-
- if Is_Record_Type (Typ) then
- declare
- Comp : Entity_Id;
-
- begin
- Comp := First_Component (Typ);
-
- while Present (Comp) loop
- if Nkind (Parent (Comp)) = N_Component_Declaration
- and then Present (Expression (Parent (Comp)))
- then
- exit;
- elsif Is_Array_Type (Etype (Comp))
- and then Present (Packed_Array_Type (Etype (Comp)))
- then
- Error_Msg_NE
- ("packed array component& will be initialized to zero?",
- Nam, Comp);
- exit;
- else
- Next_Component (Comp);
- end if;
- end loop;
- end;
- end if;
-
- Error_Msg_N
- ("use pragma Import for & to " &
- "suppress initialization ('R'M B.1(24))?",
- Nam);
- end if;
- end Warn_Overlay;
-
end Sem_Ch13;
OSDN Git Service
